: In the Linux kernel, the following vulnerability has been resolved:KVM: Reject wrapped offset in kvm_reset_dirty_gfn()kvm_reset_dirty_gfn() guards the gfn range with if (!memslot || (offset + __fls(mask)) >= memslot->npages) return;but offset is u64 and the addition is unchecked. The check can besilently bypassed by a u64 wrap.The dirty ring backing those entries is MAP_SHARED atKVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite theslot and offset fields of any entry between when the kernel pushesthem and when KVM_RESET_DIRTY_RINGS consumes them. On reset,kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feedsthem straight back into this check; only the flags handshake istreated as the handover, the slot/offset payload is taken on trust.Crafting two entries entry[i].offset = 0xffffffffffffffc1 entry[i+1].offset = 0makes the coalescing loop in kvm_dirty_ring_reset() compute delta = (s64)(0 - 0xffffffffffffffc1) = 63which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into theexisting mask by setting bit 63. The trailing kvm_reset_dirty_gfn()call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63;the sum is 0 in u64 and the bounds check passes.That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked()unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() ==true, i.e. shadow paging, any VM that has allocated shadow roots, ora write-tracked slot -- it reaches gfn_to_rmap(), which indexesslot->arch.rmap[0][] with a near-U64_MAX gfn. That is anout-of-bounds load of a kvm_rmap_head, followed by a conditionalclear of PT_WRITABLE_MASK in whatever the loaded pointer points at.The path is reachable from any process holding /dev/kvm.Range-check offset on its own first, so the addition cannot wrap.memslot->npages is bounded well below U64_MAX, so once offset
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - Cap AEAD AD length to 0x80000000In order to prevent arithmetic overflows when checking the TXbuffer size, cap the associated data length to 0x80000000.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: qcom: qdsp6: topology: check widget type before accessing dataCheck widget type before accessing the private data, as this could avirtual widget which is no associated with a dsp graph, container andmodule. Accessing witout check could lead to incorrect memory access.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/umem: Fix truncation for block sizes >= 4GWhen the iommu is used the linearization of the mapping can give a singleblock that is very large split across multiple SG entries.When __rdma_block_iter_next() reassembles the split SG entries it isoverflowing the 32 bit stack values and computed the wrong DMA addressesfor blocks after the truncation.Use the right types to hold DMA addresses.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: nl80211: reject oversized EMA RNR listsnl80211_parse_rnr_elems() stores the parsed element count in au8-backed cfg80211_rnr_elems::cnt field and uses that count to sizethe flexible array allocation.Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches255, before incrementing it again. This keeps the parser aligned withthe data structure it fills and matches the existing bound check usedby nl80211_parse_mbssid_elems().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: act_api: use RCU with deferred freeing for action lifecycleWhen NEWTFILTER and DELFILTER are run concurrently it is possible to create arace with an associated action.Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER: 0: mutex_lock() <-- holds the idr lock 0: rcu_read_lock() 0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR) 0: mutex_unlock() <-- releases the idr lock 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) <-- Action removed from IDR 1: mutex_unlock() <-- mutex released allowing us to delete the action 1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memoryThis patch fixes the race condition between NEWTFILTER and DELFILTER byadding struct rcu_head to tc_action used in the deferral and introducing acall_rcu() in the delete path to defer the final kfree().Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu")but also modernization/simplification to directly use kfree_rcu().Let's illustrate the new restored code path: 0: rcu_read_lock() 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) 1: mutex_unlock() 1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period 0: p = idr_find(idr, index) 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0 1: rcu_read_unlock() <-- release so freeing can run after grace periodAfter CPU1 calls idr_remove(), the object is no longer reachable through the IDR.CPU0's subsequent idr_find() will return NULL, and even if it still held astale pointer, the immediate kfree() is now deferred until after the RCU graceperiod, so no UAF can occur.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_ct: bail out on template ct in get evalI noticed this issue while looking at a historic syzbot report [1].A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } }The first expression attaches a per-cpu template ct vianft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is allzero, nf_ct_l3num(ct) == 0). The next expression then callsnft_ct_get_eval() on the same skb, treats the template as a real ctand hits the 16-byte memcpy path. With dreg at NFT_REG32_15 thisoverflows past struct nft_regs on the kernel stack; with smallerdreg values it silently clobbers adjacent registers.Reject template ct at the eval entry and in nft_ct_get_fast_eval(),mirroring the check nft_ct_set_eval() already has. Additionally,bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->leninstead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuplebefore pkt_to_tuple() fills in only the protocol-relevant leadingbytes, so the trailing bytes of tuple->{src,dst}.u3.all arewell-defined zero. priv->len is validated at rule load, so thecopy size is now bounded by the destination register rather thanby an untrusted field on the conntrack.[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:virtiofs: fix UAF on submount umountiput() called from fuse_release_end() can Oops if the super block hasalready been destroyed. Normally this is prevented by waiting fornum_waiting to go down to zero before commencing with super block shutdown.This only works, however, for the last submount instance, as the waitcounter is per connection, not per superblock.Revert to using synchronous release requests for the auto_submounts case,which is virtiofs only at this time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: core: fix adapter registration raceAdapters can be looked up based on their id using i2c_get_adapter()which takes a reference to the embedded struct device.Make sure that the adapter (including its struct device) has beeninitialised before adding it to the IDR to avoid accessing uninitialiseddata which could, for example, lead to NULL-pointer dereferences oruse-after-free.Note that the i2c-dev chardev, which is registered from a bus notifier,currently uses i2c_get_adapter() so the adapter needs to be added to theIDR before registration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0663, a Vimscript code injection vulnerability exists in s:NetrwLocalRmFile() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when deleting a local file from the browser. A filename derived from the buffer's directory listing is interpolated into an Ex command line passed to :execute with only the backslash character escaped, allowing a crafted filename containing a bar (|) to terminate the intended command and execute arbitrary Vimscript, including shell commands via :call system() and :!. This vulnerability is fixed in 9.2.0663.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0699, Vim's Python omni-completion (runtime/autoload/python3complete.vim and the legacy pythoncomplete.vim) executes reconstructed function and class definitions from the current buffer with exec() as part of populating the completion dictionary. When reconstructing that source, each scope's docstring is inserted verbatim between triple quotes with no escaping, so a hostile buffer can break out of the triple-quoted literal and execute attacker-controlled Python during omni-completion. This vulnerability is fixed in 9.2.0699.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0736, the PHP omni-completion script in runtime/autoload/phpcomplete.vim interpolates a class or trait name, taken from the contents of the edited buffer, into a search() pattern that is run via win_execute() without escaping. A name containing a single quote can terminate the search() string argument early, and because the bar is honored as an Ex command separator, the remainder of the name is run as Ex commands; via the :! command this allows arbitrary operating-system command execution when a victim opens a crafted PHP file and invokes omni-completion. This issue is fixed in version 9.2.0736.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim < 9.2.0780-150500.20.61.2 (version in image is 9.2.0530-150500.20.52.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0735, the C omni-completion script in runtime/autoload/ccomplete.vim interpolates the typeref: or typename: extension field of a tags entry, without escaping, into a :vimgrep pattern that is run through :execute. Because :vimgrep honors the bar as a command separator, a crafted tag field can close the search pattern and append an arbitrary Ex command; opening a hostile .c file whose project tags file contains such an entry and invoking C omni-completion runs that command as the editing user. This issue is fixed in version 9.2.0735.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim < 9.2.0780-150500.20.61.2 (version in image is 9.2.0530-150500.20.52.1).
Description: In the Linux kernel, the following vulnerability has been resolved:9p: avoid putting oldfid in p9_client_walk() error pathWhen p9_client_walk() is called with clone set to false, fid aliasesoldfid. If the walk subsequently fails after the request has been sent,the error path jumps to clunk_fid, which currently calls p9_fid_put(fid)unconditionally.This drops a reference to oldfid even though ownership of oldfid remainswith the caller. If this is the last reference, oldfid can be clunked anddestroyed while the caller still expects it to be valid. A later use orput of oldfid can then trigger a use-after-free or refcount underflow.Fix this by only putting fid in the clunk_fid error path when it does notalias oldfid, matching the existing guard in the error path below.This can be triggered when a multi-component walk is split into multiplep9_client_walk() calls and a later non-cloning walk fails. A reproducerand refcount warning logs are available on request.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:keys: Pin request_key_auth payload in instantiate pathsA: request_key() B: KEYCTL_INSTANTIATE_IOV================ =========================create auth keystore rka in auth keywait for helper get auth key load rka from auth key copy user payload sleep on #PFhelper completeddetach and free rkadestroy auth key wake up use rka->target_key **USE-AFTER-FREE**Give request_key_auth payloads a refcount. Take a payload reference whileauthkey->sem stabilizes the payload and revocation state. Hold thatreference across the instantiate and reject paths. Drop the auth keyowning reference from revoke and destroy.[jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KEYS: fix overflow in keyctl_pkey_params_get_2()The length for the internal output buffer is calculated incorrectly, whichcan result overflow when a too small buffer is provided.Fix the bug by allocating internal output with the size of the maximumlength of the cryptographic primitive instead of caller provided size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: fix use-after-free in store_modes()store_modes() replaces a framebuffer's modelist with modes from userspace.On success it frees the old modelist with fb_destroy_modelist(). Twofields still point into that freed list.One pointer is fb_display[i].mode, the mode a console is using.fbcon_new_modelist() moves these pointers to the new list. It only does sofor consoles still mapped to the framebuffer. An unmapped console isskipped and keeps its stale pointer. Unbinding fbcon, for example, setscon2fb_map[i] to -1 but leaves fb_display[i].mode set. AnFBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reachesfbcon_mode_deleted(). That function reads the stale fb_display[i].modethrough fb_mode_is_equal(). The read is a use-after-free.The other pointer is fb_info->mode, the current mode. It is set throughthe mode sysfs attribute. store_modes() does not update fb_info->mode, soit is left pointing into the freed list. show_mode(), the attribute's readhandler, dereferences the stale fb_info->mode through mode_string(). Theread is a use-after-free.Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon:Set fb_display[i]->mode to NULL when the mode is released") added thehelper fbcon_delete_modelist(). It clears every fb_display[i].mode thatpoints into a given list. So far it is called only from the unregisterpath. Call it from store_modes() too, and set fb_info->mode to NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:apparmor: fix use-after-free in rawdata dedup loopaa_replace_profiles() walks ns->rawdata_list to dedup the incomingpolicy blob against entries already attached to existing profiles.Per the kernel-doc on struct aa_loaddata, list membership does nothold a reference: profiles hold pcount, and when the last pcountdrops, do_ploaddata_rmfs() is queued on a workqueue that takesns->lock and removes the entry. Between dropping the last pcountand the workqueue running, an entry remains on the list withpcount == 0.aa_get_profile_loaddata() is an unconditional kref_get() onpcount, so when the dedup loop hits such an entry, refcounthardening reports refcount_t: addition on 0; use-after-free.inside aa_replace_profiles(), and the poisoned counter thentrips "saturated" and "underflow" warnings on the subsequentuses of the same loaddata.Before commit a0b7091c4de4 ("apparmor: fix race on rawdatadereference") the dedup path used a get_unless_zero-style helperon a single counter, so the existing "if (tmp)" guard wasmeaningful. The split-refcount refactor introducedaa_get_profile_loaddata(), which has plain kref_get() semantics,and the guard quietly became a no-op.Introduce aa_get_profile_loaddata_not0(), matching the existing_not0 convention used by aa_get_profile_not0(), and use it forthe rawdata_list dedup lookup so dying entries are skipped.Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu24.04 + stress-ng 0.17.06: stress-ng --apparmor 1 --klog-check --timeout 60sWithout this patch the three refcount_t warnings fire within afew seconds. With it the same 60 s run is clean. Coverage is asmoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSANand CONFIG_PROVE_LOCKING would be welcome from anyone with thecycles.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ip6: vti: Use ip6_tnl.net in vti6_changelink().ip netns add ns1ip netns add ns2ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7ip -n ns1 link set vti6_test netns ns2ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9ip netns del ns2ip netns del ns1[ 132.495484] ------------[ cut here ]------------[ 132.497609] kernel BUG at net/core/dev.c:12376!Commit 61220ab34948 ("vti6: Enable namespace changing") droppedNETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can thenmove through IFLA_NET_NS_FD. After the move dev_net(dev) pointsat the new netns while t->net stays at the creation netns.vti6_changelink() and vti6_update() still use dev_net(dev) anddev_net(t->dev). They unlink from one per netns hash and relinkinto another. The creation netns is left with a stale entry.cleanup_net() of that netns later walks freed memory.Reachable from an unprivileged user namespace (unshare --user--map-root-user --net). Cross tenant scope on container hosts.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: exthdrs: refresh nh after handling HAO optionip6_parse_tlv() caches skb_network_header(skb) in nh while walkingIPv6 TLVs.ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which canmove the skb head and invalidate the cached network header pointer.Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVsare parsed from the current skb head.This matches the existing pattern used in ip6_parse_tlv() after helpersthat can modify skb header storage.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-af: validate body pcifunc in rvu_mbox_handler_rep_event_notifyrvu_mbox_handler_rep_event_notify() in drivers/net/ethernet/marvell/octeontx2/af/rvu_rep.c queues a sender-controlled REP_EVENT_NOTIFYrequest body verbatim, and rvu_rep_up_notify() then forwardsevent->pcifunc (the nested body field, distinct from theAF-normalised header pcifunc) into rvu_get_pfvf(), rvu_get_pf() andthe AF->PF mailbox device index without any bounds check.A VF attached to a PF that has been put into switchdevrepresentor mode reaches this path: the VF mailbox handlerotx2_pfvf_mbox_handler() forwards every message id includingMBOX_MSG_REP_EVENT_NOTIFY to AF without an allowlist, and the AFdispatcher rewrites only msg->pcifunc, leaving structrep_event::pcifunc attacker-controlled. The siblingrvu_mbox_handler_esw_cfg() refuses requests whose header pcifuncis not rvu->rep_pcifunc; this handler has no equivalent gate.An out-of-range body pcifunc selects an &rvu->pf[]/&rvu->hwvf[]element past the allocated array and, for RVU_EVENT_MAC_ADDR_CHANGE,turns into a six-byte attacker-chosen OOB ether_addr_copy() targetinside the queued worker; KASAN reports a slab-out-of-bounds writein rvu_rep_wq_handler.Reject malformed requests at the handler entry by gating onis_pf_func_valid(), which is already the canonical PF/VF range checkin this driver; expose it via rvu.h so callers in rvu_rep.c can useit instead of open-coding the same range arithmetic.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers.Let's recompute nh pointer to make sure any change won't mess things up.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:memfd: deny writeable mappings when implying SEAL_WRITEWhen SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But theimplied seal is set after the check that makes sure the memfd can not haveany writable mappings. This means one can use SEAL_EXEC to applySEAL_WRITE while having writeable mappings.This breaks the contract that SEAL_WRITE provides and can be used by anattacker to pass a memfd that appears to be write sealed but can still bemodified arbitrarily.Fix this by adding the implied seals before the call formapping_deny_writable() is done.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: bind uarg before filling zerocopy skbvirtio_transport_send_pkt_info() allocates or reuses the zerocopy uargbefore entering the send loop, but virtio_transport_alloc_skb() stillfills the skb before it inherits that uarg. When fixed-buffer vectoredzerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attachmanaged frags and return -EMSGSIZE. The rollback path call kfree_skb()to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, soskb_release_data() falls through to ordinary frag unref.Pass the uarg into virtio_transport_alloc_skb() and bind it immediatelybefore virtio_transport_fill_skb(). This keeps control or no-payload skbsuntouched while ensuring success and rollback share one lifetime rule.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILESethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATIONnest list with an index 'i' and writes new_profile[i++] withoutbounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILESentries (5), but the Netlink nest count is entirely user-controlled.Netlink policies do not have support for constraining the numberof nested entries (or number of multi-attr entries).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: synproxy: refresh tcphdr after skb_ensure_writablesynproxy_tstamp_adjust() rewrites the TCP timestamp option in placeand then patches the TCP checksum via inet_proto_csum_replace4() onthe caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() andipv6_synproxy_hook() obtain that pointer with skb_header_pointer()before calling in, so it may either alias skb->head directly orpoint at the caller's on-stack _tcph buffer.Between obtaining the pointer and using it, the function callsskb_ensure_writable(skb, optend), which on a cloned or non-linearskb invokes pskb_expand_head() and frees the old skb->head. Afterthat point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */The option bytes are written through skb->data and are fine; onlythe checksum update goes through th and so lands in the wrongplace. The result is either a write into freed slab memory or apacket leaving with a checksum that does not match its payload.Fix by re-deriving th from skb->data + protoff immediately afterskb_ensure_writable() succeeds, so the subsequent checksum updatetargets the linear, writable header.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN predictionBlamed commit moved the TIME_WAIT-derived ISN from the skb controlblock to a per-CPU variable, assuming the value would always be consumedby tcp_conn_request() for the same packet that wrote it. That assumptionis violated by multiple drop paths between the producer(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer(tcp_conn_request()): - min_ttl / min_hopcount check - xfrm policy check - tcp_inbound_hash() MD5/AO mismatch - tcp_filter() eBPF/SO_ATTACH_FILTER drop - th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN - psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv() - tcp_checksum_complete() in tcp_v{4,6}_do_rcv() - tcp_v{4,6}_cookie_check() returning NULLWhen a packet is dropped on any of these paths, tcp_tw_isn is left set.The next SYN processed on the same CPU then consumes the non zero value intcp_conn_request(), receiving a potentially predictable ISN.This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpuvariable.Note that tcp_v{4,6}_fill_cb() do not set it.Very litle impact on overall code size/complexity:$ scripts/bloat-o-meter -t vmlinux.old vmlinux.newadd/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)Function old new deltatcp_v6_rcv 3038 3042 +4tcp_v4_rcv 3035 3039 +4tcp_conn_request 2938 2923 -15Total: Before=24436060, After=24436053, chg -0.00%
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsgThis improves the fix for CVE-2026-43500.Fix the pagecache corruption from in-place decryption of a DATA packettransmitted locally by splice() by getting rid of the packet sharing in theI/O thread and unconditionally extracting the packet content into a bouncebuffer in which the buffer is decrypted. recvmsg() (or the kernelequivalent) then copies the data from the bounce buffer to the destinationbuffer. The sk_buff then remains unmodified.This has an additional advantage in that the packet is then arranged in thebuffer with the correct alignment required for the crypto algorithms toprocess directly. The performance of the crypto does seem to be a littlefaster and, surprisingly, the unencrypted performance doesn't seem tochange much - possibly due to removing complexity from the I/O thread.Yet another advantage is that the I/O thread doesn't have to copy packetswhich would slow down packet distribution, ACK generation, etc..The buffer belongs to the call and is allocated initially at 2K,sufficiently large to hold a whole jumbo subpacket, but the buffer will beincreased in size if needed. However, to take this work, MSG_PEEK maycause a later packet to be decrypted into the buffer, in which case theearlier one will need re-decrypting for a subsequent recvmsg().Note that rx_pkt_offset may legitimately see 0 as a valid offset now, soswitch to using USHRT_MAX to indicate an invalid offset.Note also that I would generally prefer to replace the buffers of thecurrent sk_buff with a new kmalloc'd buffer of the right size, ditching theold data and frags as this makes the handling of MSG_PEEK easier andremoves the re-decryption issue, but this looks like quite a complicatedthing to achieve. skb_morph() looks half way to what I want, but I don'twant to have to allocate a new sk_buff.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: raw: reject IP_HDRINCL packets with ihl < 5raw_send_hdrinc() validates that the caller-supplied IPv4 headerfits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ }It does not, however, reject ihl < 5. For such a packet the"if (iphlen >= sizeof(*iph))" branch is skipped, leaving thecrafted iphdr untouched, but the packet is still handed to__ip_local_out() and onward. Downstream consumers that readiph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() inparticular subtracts sizeof(struct iphdr) from top_iph->ihl * 4and passes the (signed-int-negative, then cast to size_t)result to memcpy(), producing an OOB access of length close toSIZE_MAX and a host kernel panic.An IPv4 header with ihl < 5 is malformed by definition (RFC 791:"Internet Header Length is the length of the internet header in32 bit words ... Note that the minimum value for a correct headeris 5."). The kernel should not be willing to inject such apacket into its own output path.Reject "iphlen < sizeof(*iph)" alongside the existing"iphlen > length" check. This matches the principle that locallyconstructed packets that re-enter the IP stack must pass the samebasic sanity tests that a foreign packet would be subjected to.Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper aroundthe fixup branch becomes redundant; left in place to keep thepatch minimal and backport-friendly. A follow-up can unwrap it.Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socketmessage is big enough to hold an IP header") ensures the messagebuffer is large enough to hold an iphdr, but does not constrainthe self-reported iph->ihl.Reachability: the malformed packet source is any caller withCAP_NET_RAW, including an unprivileged process in a user+netnamespace on a kernel with CONFIG_USER_NS=y. The reproduced AHcrash also requires a matching xfrm AH policy on the outgoingroute; a container granted CAP_NET_ADMIN can install that stateand policy in its netns. Loopback bypasses xfrm_output, so thetrigger uses a real netdev.Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 withmemcpy_orig at the crash site. Same shape reproduces inside arootless Docker container with --cap-add NET_ADMIN on a stockdistro kernel.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: hsr: defer node table free until after RCU readersHSR node-list and node-status generic-netlink operations run underrcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() andhsr_get_node_data(), but RTM_DELLINK teardown removes the same node tablewith plain list_del() and frees each node immediately.That lets a generic-netlink reader hold a struct hsr_node pointer acrosshsr_dellink(). In a KASAN build, widening the reader window afterhsr_get_next_node() obtains the node reproduces a slab-use-after-freewhen the reader copies node->macaddress_A; the freeing stack ishsr_del_nodes() from hsr_dellink().Use list_del_rcu() and defer the free through the existinghsr_free_node_rcu() callback. This matches the lifetime rule used by theHSR prune paths, which already delete nodes with list_del_rcu() andcall_rcu().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfs: Fix overrun check in netfs_extract_user_iter()Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfillspages[], then those pages don't get included in the iterator constructed atthe end of the function. If there was an overfill, memory corruption hasalready happened.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: ti-qspi: fix use-after-free after DMA setup failureThe driver falls back to PIO mode if DMA setup fails during probe.Make sure to clear the DMA channel pointer also if buffer allocationfails to avoid passing a pointer to the released channel to the DMAengine (or trying to free the channel a second time on late probe errorsor driver unbind).This issue was flagged by Sashiko when reviewing a devres allocationconversion patch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: qat - validate RSA CRT component lengthsThe generic RSA key parser (rsa_helper.c) bounds each CRT component (p,q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt()allocates half-size DMA buffers (key_sz / 2) and right-aligns eachcomponent with: memcpy(dst + half_key_sz - len, src, len)When a CRT component is larger than half_key_sz the subtractionunderflows and memcpy writes past the DMA buffer, causing memorycorruption.Add a len > half_key_sz check next to the existing !len check for eachof the five CRT components so the driver falls back to the non-CRT pathinstead of writing out of bounds.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udf: validate sparing table length as an entry count, not a byte countudf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksizeis false, i.e. it treats reallocationTableLen as a number of BYTES thatmust fit in the block. But the table is walked as an array of 8-bytesparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... }in udf_get_pblock_spar15() and udf_relocate_blocks(). AreallocationTableLen of N therefore passes the check wheneversizeof(*st) + N <= blocksize, yet the consumers indexsizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x theblock. On a crafted UDF image this is an out-of-bounds read inudf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds thesame length to udf_update_tag(), whose crc_itu_t() reads far past theblock, and its memmove() through st->mapEntry[] is an out-of-boundswrite.Validate reallocationTableLen as the entry count it is, withstruct_size().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:posix-cpu-timers: Prevent UAF caused by non-leader exec() raceWongi and Jungwoo decoded and reported a non-leader exec() related racewhich can result in an UAF: sys_timer_delete() exec() posix_cpu_timer_del() // Observes old leader p = pid_task(pid, pid_type); de_thread() switch_leader(); release_task(old_leader) __exit_signal(old_leader) sighand = lock(old_leader, sighand); posix_cpu_timers*_exit(); sighand = lock_task_sighand(p) unhash_task(old_leader); sh = lock(p, sighand) old_leader->sighand = NULL; unlock(sighand); (p->sighand == NULL) unlock(sh) return NULL; // Returns without action if(!sighand) return 0; free_posix_timer();This is "harmless" unless the deleted timer was armed and enqueued inp->signal because on exec() a TGID targeted timer is inherited.As sys_timer_delete() freed the underlying posix timer objectrun_posix_cpu_timers() or any timerqueue related add/delete operations onother timers will access the freed object's timerqueue node, which resultsin an UAF.There is a similar problem vs. posix_cpu_timer_set(). For regular posixtimers it just transiently returns -ESRCH to user space, but for the usecase in do_cpu_nanosleep() it's the same UAF just that the k_itimer isallocated on the stack.Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stopsto expire.While debating solutions Frederic pointed out another problem: posix_cpu_timer_del(tmr) __exit_signal(p) posix_cpu_timers*_exit(p); unhash_task(p); p->sighand = NULL; sh = lock_task_sighand(p) sighand = p->sighand; if (!sighand) return NULL; lock(sighand); if (!sh) WARN_ON_ONCE(timer_queued(tmr));On weakly ordered architectures it is not guaranteed thatposix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit()when p->sighand is observed as NULL, which means the WARN() can be a falsepositive.Solve these issues by: 1) Changing the store in __exit_signal() to smp_store_release(). 2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path of lock_task_sighand(). 3) Creating a helper function for looking up the task and locking sighand which does not return when sighand == NULL. Instead it retries the task lookup and only if that fails it gives up. 4) Using that helper in the three affected functions.#1/#2 ensures that the reader side which observes sighand == NULL alsoobserves all preceeding stores, i.e. the stores in posix_cpu_timers*_exit()and the ones in unhash_task().#3 ensures that the above described non-leader exec() situation is handledgracefully. When the task lookup returns the old leader, but sighand ==NULL then it retries. In the non-leader exec() case the subsequent tasklookup will observe the new leader due to #1/#2. In normal exit() scenariosthe subsequent lookup fails.When the task lookup fails, the function also checks whether the timer isstill enqueued and issues a warning if that's the case. Unfortunately thereis nothing which can be done about it, but as the task is already notlonger visible the timer should not be accessed anymore. This check alsorequires memory ordering, which is not provided when the first lookupfails. To achieve that the check is preceeded by a smp_rmb() which pairswith the smp_wmb() in write_seqlock() in __exit_signal(). That ensures thatthe stores in posix_cpu_timers*_exit() are visible.The history of the non-leader exec() issue goes back to the early days ofposix CPU timers, which stored a pointer to the group leader task in thetimer. That obviously fails when a non-leader exec() switches the leader.commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problemswith mt exec") added a temporary workaround for that in 2010 which surv---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nVMX: Hide shadow VMCS right after VMCLEARfree_nested() frees the shadow VMCS while vmcs01 still points to it. Butbecause it is asynchronous with respect to loaded_vmcs_clear(), the vCPUmight migrate before the pointer is cleared and __loaded_vmcs_clear()may then execute VMCLEAR.The VMCS needs to stay attached until its explicit VMCLEAR completes, butthen it can be hidden and the page safely freed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: don't free the ASCONF's own transport in DEL-IP processingsctp_process_asconf() caches the transport the ASCONF chunk is processedagainst in asconf->transport (== chunk->transport, set once in sctp_rcv()).For an ASCONF located through its Address Parameter by__sctp_rcv_asconf_lookup(), that cached transport corresponds to theAddress Parameter, which need not be the packet's source address.sctp_process_asconf_param() rejects a DEL-IP for the packet source address(ADDIP D8, SCTP_ERROR_DEL_SRC_IP), but nothing protects asconf->transport.A single ASCONF can therefore carry, in order: [Address Parameter L] [DEL-IP L] [DEL-IP 0.0.0.0]where L differs from the source. The DEL-IP for L passes the D8 check andcalls sctp_assoc_rm_peer() on the transport that asconf->transport stillpoints at, freeing it (RCU-deferred). The following wildcard DEL-IP thenreuses the now-dangling asconf->transport in sctp_assoc_set_primary() andsctp_assoc_del_nonprimary_peers(): set_primary() dereferences the freedtransport (->ipaddr, ->state) and plants the dangling pointer intoasoc->peer.primary_path / active_path, and del_nonprimary_peers(), keepingonly the pointer that is no longer on the list, removes every realtransport, leaving the association with a transport_count of 0 andprimary_path/active_path pointing at freed memory.Reject a DEL-IP that targets the transport the ASCONF is being processedagainst, mirroring the existing source-address guard, so the wildcardbranch can never reuse a freed transport.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()On the error path where in6_dev_get(dev) returns NULL, xfrm6_fill_dst()releases the device reference with netdev_put() but leavesxdst->u.dst.dev set. dst_destroy() later calls netdev_put(dst->dev)again, so the same net_device reference is released twice, underflowingits refcount (ref_tracker WARNING + "unregister_netdevice: waiting for to become free").Clear xdst->u.dst.dev after the netdev_put(), the same way the XFRMdevice-offload paths xfrm_dev_state_add() and xfrm_dev_policy_add() innet/xfrm/xfrm_device.c NULL ->dev when releasing the reference on error. ref_tracker: reference already released. ref_tracker: allocated in: xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:86) ... udpv6_sendmsg (net/ipv6/udp.c:1696) ... ref_tracker: freed in: xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:90) ... WARNING: lib/ref_tracker.c:322 at ref_tracker_free+0x58b/0x780 dst_destroy (net/core/dst.c:115) rcu_core handle_softirqs ...
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: resample the data fork mapping after cycling ILOCKxfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode,a data fork mapping, and a cow fork mapping. Unfortunately, these twohelpers cycle the ILOCK to grab a transaction, which means that themappings are stale as soon as we reacquire the ILOCK. Currently werefresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, butwe don't refresh the data fork mapping beforehand, which means that thexfs_bmap_trim_cow in that function queries the refcount btree about thewrong physical blocks and returns an inaccurate value in *shared.If *shared is now false, the directio write proceeds with a stale datafork mapping. Fix this by querying the data fork mapping if thesequence counter changes across the ILOCK cycle.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in binutils. A heap-buffer-overflow vulnerability exists when processing a specially crafted XCOFF (Extended Common Object File Format) object file during linking. A local attacker could trick a user into processing this malicious file, which could lead to arbitrary code execution, allowing the attacker to run unauthorized commands, or cause a denial of service, making the system unavailable.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- glib2-tools > 0-0 (version in image is 2.78.6-150600.4.35.1).
Description: The in-memory keyring returned by NewKeyring() silently accepted keys with the ConfirmBeforeUse constraint but never enforced it. The key would sign without any confirmation prompt, with no indication to the caller that the constraint was not in effect. NewKeyring() now returns an error when unsupported constraints are requested.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: virtio_bt: clamp rx length before skb_putvirtbt_rx_work() calls skb_put(skb, len) where len comes directlyfrom virtqueue_get_buf() with no validation against the buffer weposted to the device. The RX skb is allocated in virtbt_add_inbuf()and exposed to virtio as exactly 1000 bytes via sg_init_one().Checking len against skb_tailroom(skb) is not sufficient becausealloc_skb() can leave more tailroom than the 1000 bytes actuallyhanded to the device. A malicious or buggy backend can thereforereport used.len between 1001 and skb_tailroom(skb), causing skb_put()to include uninitialized kernel heap bytes that were never written bythe device.The same path also accepts len == 0, in which case skb_put(skb, 0)leaves the skb empty but virtbt_rx_handle() still reads the pkt_typebyte from skb->data, consuming uninitialized memory.Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() andsg_init_one(), and gate virtbt_rx_work() on that same constant sothe bound checked matches the buffer actually exposed to the device.Reject used.len == 0 in the same gate so an empty completion canno longer reach virtbt_rx_handle().Use bt_dev_err_ratelimited() because the length value comes from anuntrusted backend that can otherwise flood the kernel log.Same class of bug as commit c04db81cd028 ("net/9p: Fix bufferoverflow in USB transport layer"), which hardened the USB 9ptransport against unchecked device-reported length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: ssh in OpenSSH before 10.4 can have a use-after-free when a server changes its host key during a key re-exchange. (This outcome occurs only on the client side.)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm: call ->free_folio() directly in folio_unmap_invalidate()We can only call filemap_free_folio() if we have a reference to (or hold alock on) the mapping. Otherwise, we've already removed the folio from themapping so it no longer pins the mapping and the mapping can be removed,causing a use-after-free when accessing mapping->a_ops.Follow the same pattern as __remove_mapping() and load the free_foliofunction pointer before dropping the lock on the mapping. That lets usmake filemap_free_folio() static as this was the only caller outsidefilemap.c.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: require a full NFS mode SID before reading mode bitsparse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFSmode SID and reads sid.sub_auth[2] to recover the mode bits.That assumes the ACE carries three subauthorities, but compare_sids()only compares min(a, b) subauthorities. A malicious server can returnan ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which stillmatches sid_unix_NFS_mode and then drives the sub_auth[2] read fourbytes past the end of the ACE.Require num_subauth >= 3 before treating the ACE as an NFS mode SID.This keeps the fix local to the special-SID mode path without changingcompare_sids() semantics for the rest of cifsacl.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: run set info with opener credentialsSMB2 SET_INFO handlers call path-based VFS helpers after checking theaccess mask granted to the SMB handle. Those helpers perform their owner,inode permission and LSM checks using the current ksmbd worker credentials.Run the complete SET_INFO dispatch with the credentials captured when thehandle was opened. This also removes the separate security informationcredential setup and keeps all SET_INFO classes under one credential scope.Direct override_creds() is used because it can nest with the requestcredential overrides already used by rename and link helpers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: An attacker can pass a malicious malformed token which causes unexpected memory to be consumed during parsing.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: SSH servers which implement file transfer protocols are vulnerable to a denial of service attack from clients which complete the key exchange slowly, or not at all, causing pending content to be read into memory, but never transmitted.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. In versions on the 4.x branch prior to version 4.0.5, when parsing compact JWS or JWE input, Go JOSE could use excessive memory. The code used strings.Split(token, ".") to split JWT tokens, which is vulnerable to excessive memory consumption when processing maliciously crafted tokens with a large number of `.` characters. An attacker could exploit this by sending numerous malformed tokens, leading to memory exhaustion and a Denial of Service. Version 4.0.5 fixes this issue. As a workaround, applications could pre-validate that payloads passed to Go JOSE do not contain an excessive number of `.` characters.
Packages affected:
- sle-module-containers-release == 15.6 (version in image is 15.6-150600.37.2).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath12k: fix memory leak in ath12k_service_ready_ext_eventCurrently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_capsis not freed in the failure case, causing a memory leak. The followingtrace is observed in kmemleak:unreferenced object 0xffff8b3eb5789c00 (size 1024): comm "softirq", pid 0, jiffies 4294942577 hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{... 01 00 00 00 00 00 00 00 01 00 00 00 1f 38 00 00 .............8.. backtrace (crc 44e1c357): __kmalloc_noprof+0x30b/0x410 ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k] ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k] ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k] ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k] ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0 tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30Free svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak.Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: SSH clients receiving SSH_AGENT_SUCCESS when expecting a typed response will panic and cause early termination of the client process.
Packages affected:
- sle-module-containers-release == 15.6 (version in image is 15.6-150600.37.2).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipvs: fix ipv4 null-ptr-deref in route error pathThe IPv4 code path in __ip_vs_get_out_rt() calls dst_link_failure()without ensuring skb->dev is set, leading to a NULL pointer dereferencein fib_compute_spec_dst() when ipv4_link_failure() attempts to sendICMP destination unreachable messages.The issue emerged after commit ed0de45a1008 ("ipv4: recompile ip optionsin ipv4_link_failure") started calling __ip_options_compile() fromipv4_link_failure(). This code path eventually calls fib_compute_spec_dst()which dereferences skb->dev. An attempt was made to fix the NULL skb->devdereference in commit 0113d9c9d1cc ("ipv4: fix null-deref inipv4_link_failure"), but it only addressed the immediate dev_net(skb->dev)dereference by using a fallback device. The fix was incomplete becausefib_compute_spec_dst() later in the call chain still accesses skb->devdirectly, which remains NULL when IPVS calls dst_link_failure().The crash occurs when:1. IPVS processes a packet in NAT mode with a misconfigured destination2. Route lookup fails in __ip_vs_get_out_rt() before establishing a route3. The error path calls dst_link_failure(skb) with skb->dev == NULL4. ipv4_link_failure() -> ipv4_send_dest_unreach() -> __ip_options_compile() -> fib_compute_spec_dst()5. fib_compute_spec_dst() dereferences NULL skb->devApply the same fix used for IPv6 in commit 326bf17ea5d4 ("ipvs: fixipv6 route unreach panic"): set skb->dev from skb_dst(skb)->dev beforecalling dst_link_failure().KASAN: null-ptr-deref in range [0x0000000000000328-0x000000000000032f]CPU: 1 PID: 12732 Comm: syz.1.3469 Not tainted 6.6.114 #2RIP: 0010:__in_dev_get_rcu include/linux/inetdevice.h:233RIP: 0010:fib_compute_spec_dst+0x17a/0x9f0 net/ipv4/fib_frontend.c:285Call Trace: spec_dst_fill net/ipv4/ip_options.c:232 spec_dst_fill net/ipv4/ip_options.c:229 __ip_options_compile+0x13a1/0x17d0 net/ipv4/ip_options.c:330 ipv4_send_dest_unreach net/ipv4/route.c:1252 ipv4_link_failure+0x702/0xb80 net/ipv4/route.c:1265 dst_link_failure include/net/dst.h:437 __ip_vs_get_out_rt+0x15fd/0x19e0 net/netfilter/ipvs/ip_vs_xmit.c:412 ip_vs_nat_xmit+0x1d8/0xc80 net/netfilter/ipvs/ip_vs_xmit.c:764
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()There exists a kernel oops caused by a BUG_ON(nhead < 0) atnet/core/skbuff.c:2232 in pskb_expand_head().This bug is triggered as part of the calipso_skbuff_setattr()routine when skb_cow() is passed headroom > INT_MAX(i.e. (int)(skb_headroom(skb) + len_delta) < 0).The root cause of the bug is due to an implicit integer cast in__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensurethat delta = headroom - skb_headroom(skb) is never negative, otherwisewe will trigger a BUG_ON in pskb_expand_head(). However, ifheadroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, deltabecomes negative, and pskb_expand_head() is passed a negative value fornhead.Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()by only using skb_cow() to grow headroom.PoC: Using `netlabelctl` tool: netlabelctl map del default netlabelctl calipso add pass doi:7 netlabelctl map add default address:0::1/128 protocol:calipso,7 Then run the following PoC: int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP); // setup msghdr int cmsg_size = 2; int cmsg_len = 0x60; struct msghdr msg; struct sockaddr_in6 dest_addr; struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1, sizeof(struct cmsghdr) + cmsg_len); msg.msg_name = &dest_addr; msg.msg_namelen = sizeof(dest_addr); msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = cmsg; msg.msg_controllen = cmsg_len; msg.msg_flags = 0; // setup sockaddr dest_addr.sin6_family = AF_INET6; dest_addr.sin6_port = htons(31337); dest_addr.sin6_flowinfo = htonl(31337); dest_addr.sin6_addr = in6addr_loopback; dest_addr.sin6_scope_id = 31337; // setup cmsghdr cmsg->cmsg_len = cmsg_len; cmsg->cmsg_level = IPPROTO_IPV6; cmsg->cmsg_type = IPV6_HOPOPTS; char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr); hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80 sendmsg(fd, &msg, 0);
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: When using the "configparser" module to write configuration filescontaining multi-line text values with carriage return characters (\r) theresulting file could be injected with unexpected keys and values if theattacker controls the written value.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: A vulnerability has been found in cilium ebpf up to 0.21.0. This affects the function loadRawSpec of the file btf/btf.go of the component LoadCollectionSpec/LoadCollectionSpecFromReader. Such manipulation of the argument offset leads to integer overflow. The attack can only be performed from a local environment. The exploit has been disclosed to the public and may be used. The name of the patch is 533dfc82fd228bfadf42ea7180c39de7d9af47fa. A patch should be applied to remediate this issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: An attacker who knows (or guesses) that a resolver uses RPZ with wildcard CNAME policies can craft query names long enough to trigger a NAMETOOLONG error condition during RPZ processing. This is not handled correctly and may lead to defeating the RPZ rule. It also may lead to an unexpected exit of the BIND 9 software.This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.50-150600.3.32.1 (version in image is 9.18.33-150600.3.21.1).
Description: A DNSSEC validating resolver that is under a random subdomain attack against a DNSSEC-signed zone can suffer from runaway memory usage. The attacker needs to be able to send queries faster than the resolver can perform validation. The increased memory usage can be orders of magnitude beyond the limit configured in the `max-cache-size` parameter.This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.50-150600.3.32.1 (version in image is 9.18.33-150600.3.21.1).
Description: It is possible for an attacker's zone to respond to a query with an RRSIG that has a smaller number of labels than the zone in which the RRSIG is contained. This causes `named` to produce a wildcard name for a zone that is shorter than the attacker's zone, which can result in cache poisoning. For this attack to have any effect, the resolver under attack must have set `synth-from-dnssec yes;` (which is the default).This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.50-150600.3.32.1 (version in image is 9.18.33-150600.3.21.1).
Description: tarfile.extractall() with the 'data' or 'tar' filter could be bypassed by a crafted archive where a hardlink references a symlink stored at a deeper name than the hardlink itself. The extraction fallback validated the symlink at it's archived location but recreated it at the hardlink's shallowerpath, letting a relative target the filter judged contained escape the destination directory. This allowed a malicious tar archive to create a symlink pointing outside the destination, enabling out-of-destination file reads or writes. This was an incomplete fix of CVE-2025-4330.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: The issue is unexpected program termination based on ordering and/or specific content in responses to queries for CNAME or DNAME, and A records. Specifically, if a client queries for a DNAME and A record below the DNAME to the resolver, and the authoritative server responds positively to the A query but delays the DNAME response and later responds negatively, `named` may quit unexpectedly. Or, if a client queries for a CNAME and A record for the same name to the resolver, and the authoritative server responds positively to the A query but delays the CNAME response and later responds with a self-referential CNAME, the same failure may occur.This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.50-150600.3.32.1 (version in image is 9.18.33-150600.3.21.1).
Description: If a provably insecure domain is covered by both an NSEC and NSEC3 record at the parent, and there exist an RRSIG for only one of these types, then BIND may exit unexpectedly with an assertion while validating this proof.This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.50-150600.3.32.1 (version in image is 9.18.33-150600.3.21.1).
Description: The incremental HTML parser (html.parser.HTMLParser) allows for CPUdenial-of-service through repeated unterminated markup declarations whenprocessing uncontrolled data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- dracut > 0-0 (version in image is 059+suse.563.gb5b26e30-150600.3.26.2).
Description: A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP options, such as a malicious root-path, next-server, or bootfile name, to a system using dracut's NetworkManager-based initrd network module. These options are improperly handled and written into a temporary shell script without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs during system boot.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- dracut > 0-0 (version in image is 059+suse.563.gb5b26e30-150600.3.26.2).
Description: Parsing arbitrary HTML can consume excessive CPU time, possibly leading to denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments.This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.49-150600.3.26.1 (version in image is 9.18.33-150600.3.21.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: fix possible deadlock between unlink and dio_end_io_writeocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem,while in ocfs2_dio_end_io_write, it acquires these locks in reverse order.This creates an ABBA lock ordering violation on lock classesocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] andocfs2_file_ip_alloc_sem_key.Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem):ocfs2_unlink ocfs2_prepare_orphan_dir ocfs2_lookup_lock_orphan_dir inode_lock(orphan_dir_inode) <- lock A __ocfs2_prepare_orphan_dir ocfs2_prepare_dir_for_insert ocfs2_extend_dir ocfs2_expand_inline_dir down_write(&oi->ip_alloc_sem) <- Lock BLock Chain #1 (ip_alloc_sem -> orphan dir inode_lock):ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem) <- Lock B ocfs2_del_inode_from_orphan() inode_lock(orphan_dir_inode) <- Lock ADeadlock Scenario: CPU0 (unlink) CPU1 (dio_end_io_write) ------ ------ inode_lock(orphan_dir_inode) down_write(ip_alloc_sem) down_write(ip_alloc_sem) inode_lock(orphan_dir_inode)Since ip_alloc_sem is to protect allocation changes, which is unrelatedwith operations in ocfs2_del_inode_from_orphan. So moveocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: unicodedata.normalize() can take excessive CPU time when processingspecially crafted Unicode input containing long runs of combining characterswith alternating Canonical Combining Class values.This affects all normalization forms.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to version 0.28.1, insufficient validation of Git URL fragment subdir components may allow access to files outside the checked-out Git repository root. Possible access is limited to files on the same mounted filesystem. The issue has been fixed in version v0.28.1 The issue affects only builds that use Git URLs with a subpath component. As a workaround, avoid building Dockerfiles from untrusted sources or using the subdir component from an untrusted Git repository where the subdir component could point to a symlink.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- containerd < 1.7.29-150000.137.1 (version in image is 1.7.29-150000.132.1).
Description: Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.4 and 3.0.5, decrypting a JSON Web Encryption (JWE) object will panic if the alg field indicates a key wrapping algorithm (one ending in KW, with the exception of A128GCMKW, A192GCMKW, and A256GCMKW) and the encrypted_key field is empty. The panic happens when cipher.KeyUnwrap() in key_wrap.go attempts to allocate a slice with a zero or negative length based on the length of the encrypted_key. This code path is reachable from ParseEncrypted() / ParseEncryptedJSON() / ParseEncryptedCompact() followed by Decrypt() on the resulting object. Note that the parse functions take a list of accepted key algorithms. If the accepted key algorithms do not include any key wrapping algorithms, parsing will fail and the application will be unaffected. This panic is also reachable by calling cipher.KeyUnwrap() directly with any ciphertext parameter less than 16 bytes long, but calling this function directly is less common. Panics can lead to denial of service. This vulnerability is fixed in 4.1.4 and 3.0.5.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: The RSA and DSA public key parsers did not enforce size limits on key parameters. A crafted public key with an excessively large modulus or DSA parameter could cause several minutes of CPU consumption during signature verification. This could be triggered by unauthenticated clients during public key authentication. RSA moduli are now limited to 8192 bits, and DSA parameters are validated per FIPS 186-2.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: When writing data larger than 4GB in a single Write call on an SSH channel, an integer overflow in the internal payload size calculation caused the write loop to spin indefinitely, sending empty packets without making progress. The size comparison now uses int64 to prevent truncation.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: SSH servers which use CertChecker as a public key callback without setting IsUserAuthority or IsHostAuthority could be caused to panic by a client presenting a certificate. CertChecker now returns an error instead of panicking when these callbacks are nil.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: bla: prevent use-after-free when deleting claimsWhen batadv_bla_del_backbone_claims() removes all claims for a backbone, itdoes this by dropping the link entry in the hash list. This list entryitself was one of the references which need to be dropped at the same timevia batadv_claim_put().But the batadv_claim_put() must not be done before the last access to theclaim object in this function. Otherwise the claim might be freed alreadyby the batadv_claim_release() function before the list entry was dropped.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: An incorrectly placed cast from bytes to int allowed for server-side panic in the AES-GCM packet decoder for well-crafted inputs.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: For certain crafted inputs, a 'ed25519.PrivateKey' was created by casting malformed wire bytes, leading to a panic when used.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: Unknown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: A flaw was found in libsolv. A stack-based buffer overflow vulnerability exists in the PGP verification component due to incorrect length handling when copying EdDSA 's' MPI into a stack buffer. A remote attacker could craft a malicious Ed25519 PGP signature with mismatched MPI lengths. Processing this crafted signature could lead to a denial of service in automated package or repository processing workflows.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsolv-tools-base < 0.7.39-150600.8.24.1 (version in image is 0.7.34-150600.8.19.2).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Fix potential out-of-bounds access in crush_decode()A message of type CEPH_MSG_OSD_MAP containing a crush map with at leastone bucket has two fields holding the bucket algorithm. If the valuesin these two fields differ, an out-of-bounds access can occur. This isthe case because the first algorithm field (alg) is used to allocatethe correct amount of memory for a bucket of this type, while the secondalgorithm field inside the bucket (b->alg) is used in the subsequentprocessing.This patch fixes the issue by adding a check that compares alg andb->alg and aborts the processing in case they differ. Furthermore,b->alg is set to 0 in this case, because the destruction of the crushmap also uses this field to determine the bucket type, which can againresult in an out-of-bounds access when trying to free the memory pointedto by the fields of the bucket. To correctly free the memory allocatedfor the bucket in such a case, the corresponding call to kfree is movedfrom the algorithm-specific crush_destroy_bucket functions to thegeneric crush_destroy_bucket().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()In __ceph_x_decrypt(), a part of the buffer p is interpreted as aceph_x_encrypt_header, and the magic field of this struct is accessed.This happens without any guarantee that the buffer is large enough tohold this struct. The function parameter ciphertext_len represents thelength of the ciphertext to decrypt and is guaranteed to be at most theremaining size of the allocated buffer p. However, this value is notnecessarily greater than sizeof(ceph_x_encrypt_header). E.g., a messageframe of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to holdthe ciphertext at its end with a ciphertext_len of 8 or less, cantrigger an out-of-bounds memory access when accessing hdr->magic.This patch fixes the issue by adding a check to ensure that thedecrypted plaintext in the buffer is large enough to represent at leastthe ceph_x_encrypt_header.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Fix potential out-of-bounds access in osdmap_decode()When decoding osd_state and osd_weight from an incoming osdmap inosdmap_decode(), both are decoded for each osd, i.e., map->max_osdtimes. The ceph_decode_need() check only accounts forsizeof(*map->osd_weight) once. This can potentially result in anout-of-bounds memory access if the incoming message is corrupted suchthat the max_osd value exceeds the actual content of the osdmap message.This patch fixes the issue by changing the corresponding part in theceph_decode_need() check to account formap->max_osd*sizeof(*map->osd_weight).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_sip: don't use simple_strtoulReplace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),and ct_sip_parse_request() with a new sip_parse_port() helper thatvalidates each digit against the buffer limit, eliminating the use ofsimple_strtoul() which assumes NUL-terminated strings.The previous code dereferenced pointers without bounds checks aftersip_parse_addr() and relied on simple_strtoul() on non-NUL-terminatedskb data. A port that reaches the buffer limit without a trailingcharacter is also rejected as malformed.Also get rid of all simple_strtoul() usage in conntrack, prefer astricter version instead. There are intentional changes:- Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters.- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10.- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range.- epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it.Based on an earlier patch from Jenny Guanni Qu .
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFERWhen protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() callshci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()assumes it is held, and if conn is deleted concurrently -> UAF.Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferredlistening socket code paths, hci_connect_cfm(conn) is called withhdev->lock held.Fix by holding the lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,but returns the selected listener after dropping that lock withouttaking a reference. rfcomm_connect_ind() then locks the listener,queues a child socket on it, and may notify it after unlocking it.The buggy scenario involves two paths, with each column showing theorder within that path:rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change().If close wins the race, parent can be freed beforerfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or thedeferred-setup callback.Take a reference on the listener before leaving rfcomm_sk_list.lock.After lock_sock() succeeds, recheck that it is still in BT_LISTENbefore queueing a child, cache the deferred-setup bit while the parentis locked, and drop the reference after the last parent use.KASAN reported a slab-use-after-free in lock_sock_nested() fromrfcomm_connect_ind(), with the freeing stack going throughrfcomm_sock_kill() and rfcomm_sock_release().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: Perl versions through 5.43.10 have an integer overflow in S_measure_struct leading to an out-of-bounds heap read in pack and unpack.S_measure_struct adds each item's size times its repeat count to a running total with no overflow check, so a large repeat count in a pack or unpack template wraps the signed SSize_t total negative. The @, X, and x position codes then guard their moves with a signed length comparison that passes when the length is negative, advancing the buffer pointer out of bounds.A template derived from untrusted input can read heap memory past the buffer and return it to the caller.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- perl > 0-0 (version in image is 5.26.1-150300.17.20.1).
Description: A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a `node` element nested within other elements like `method`, `signal`, `property` or `arg`. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools < 2.78.6-150600.4.38.1 (version in image is 2.78.6-150600.4.35.1).
Description: GNU Wget through 1.25.0, fixed in commit 37a40fc, contains a heap buffer underread vulnerability in the clean_metalink_string() function within src/metalink.c that allows a malicious server to trigger memory corruption by serving a Metalink document containing a whitespace-only URL. Attackers can cause the function to decrement a pointer past the start of the buffer when processing an all-whitespace Metalink URL, potentially leading to abnormal program behavior.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- wget > 0-0 (version in image is 1.20.3-150600.19.12.1).
Description: Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) - for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafted requests reaching the affected code paths - recursion, dynamic updates (`UPDATE`), zone change notifications (`NOTIFY`), or processing of `IN`-specific record types in non-`IN` data - can cause assertion failures in `named`.This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.49-150600.3.26.1 (version in image is 9.18.33-150600.3.21.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gcov: use atomic counter updates to fix concurrent access crashesGCC's GCOV instrumentation can merge global branch counters with loopinduction variables as an optimization. In inflate_fast(), the inner copyloops get transformed so that the GCOV counter value is loaded multipletimes to compute the loop base address, start index, and end bound. SinceGCOV counters are global (not per-CPU), concurrent execution on differentCPUs causes the counter to change between loads, producing inconsistentvalues and out-of-bounds memory writes.The crash manifests during IPComp (IP Payload Compression) processing wheninflate_fast() runs concurrently on multiple CPUs: BUG: unable to handle page fault for address: ffffd0a3c0902ffa RIP: inflate_fast+1431 Call Trace: zlib_inflate __deflate_decompress crypto_comp_decompress ipcomp_decompress [xfrm_ipcomp] ipcomp_input [xfrm_ipcomp] xfrm_inputAt the crash point, the compiler generated three loads from the sameglobal GCOV counter (__gcov0.inflate_fast+216) to compute base, start, andend for an indexed loop. Another CPU modified the counter between loads,making the values inconsistent - the write went 3.4 MB past a 65 KBbuffer.Add -fprofile-update=prefer-atomic to CFLAGS_GCOV at the global level inthe top-level Makefile, guarded by a try-run compile test. The testcompiles a minimal program with and without -fprofile-update=prefer-atomicusing the full KBUILD_CFLAGS, then compares undefined symbols in theresulting object files. If prefer-atomic introduces new undefinedreferences (such as __atomic_fetch_add_8 on i386 or __aarch64_ldadd8_relaxon arm64 with outline-atomics), the flag is not added -- the kernel doesnot link against libatomic.On architectures where GCC inlines 64-bit atomic counter updates (x86_64,s390, ...) the test passes and the flag is enabled, preventing thecompiler from merging counters with loop induction variables and fixingthe observed concurrent-access crash.On architectures where the flag would introduce libatomic dependencies, itis silently omitted and behaviour is no worse than before this patch.Move the CFLAGS_GCOV block from its original position (before the archMakefile include) to after the core KBUILD_CFLAGS assignments but beforethe scripts/Makefile.gcc-plugins include. This placement ensures thetry-run test sees arch-specific flags (-m32, -march=,-mno-outline-atomics) while avoiding GCC plugin flags (-fplugin=) thatwould break the test on clean builds when plugin shared objects do not yetexist.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:esp: fix page frag reference leak on skb_to_sgvec failureIn esp_output_tail(), when esp->inplace is false, the old skb page fragsare replaced with a new page from the xfrm page_frag cache. The sourcescatterlist (sg) is built from the old frags before the replacement, andesp_ssg_unref() is responsible for releasing the old page referencesafter the crypto operation completes.However, if the second skb_to_sgvec() call (which builds the destinationscatterlist from the new page) fails, the code jumps to error_free whichonly calls kfree(tmp). The old page frag references captured in thesource scatterlist are never released: 1. sg[] is built from old frags via skb_to_sgvec() (no extra get_page) 2. nr_frags is set to 1 and frag[0] is replaced with the new page 3. Second skb_to_sgvec() fails -> goto error_free 4. kfree(tmp) frees the sg[] memory but old frags are not unref'd 5. kfree_skb() only releases frag[0] (the new page), not the old onesFix this by adding a bool parameter to esp_ssg_unref() that, when true,unconditionally unrefs the source scatterlist frags without checkingreq->src and req->dst, since those fields are not yet initialized byaead_request_set_crypt() at the point of the error. Existing callerspass false to preserve the original behavior.The same issue exists in both esp4 and esp6 as the code is identical.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_sync: fix UAF in hci_le_create_cis_synchci_le_create_cis_sync() dereferences conn->conn_timeout after releasingboth rcu_read_lock() and hci_dev_lock(hdev). The conn pointer wasobtained from an RCU-protected iteration over hdev->conn_hash.list andis not valid once these locks are dropped. A concurrent disconnect canfree the hci_conn between the unlock and the dereference, causing ause-after-free read.The cancellation mechanism in hci_conn_del() cannot prevent this becausehci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() nevermatches, and the pending work item is not cancelled.Fix this by saving conn->conn_timeout into a local variable while thelocks are still held, so the stale conn pointer is never dereferencedafter unlock.This is the same class of bug as the one fixed by commit 035c25007c9e("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") whichaddressed the identical pattern in a different function.This vulnerability was identified using 0sec.ai, an open-sourceautomated security auditing platform (https://github.com/0sec-labs).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: ISO: fix UAF in iso_recv_frameiso_recv_frame reads conn->sk under iso_conn_lock but releases the lockbefore using sk, with no reference held. A concurrent iso_sock_kill()can free sk in that window, causing use-after-free on sk->sk_state andsock_queue_rcv_skb().Fix by replacing the bare pointer read with iso_sock_hold(conn), whichcalls sock_hold() while the spinlock is held, atomically elevating therefcount before the lock drops. Add a drop_put label so sock_put() iscalled on all exit paths where the hold succeeded.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: fix possible infinite loop in fib6_select_path()Found while auditing the same pattern Sashiko reported inrt6_fill_node() [1]. Apply the same fix ascommit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)without waiting for RCU readers; first->fib6_siblings.next thenstill points into the old ring and this softirq-side walker neverreaches &first->fib6_siblings as its terminator. fib6_purge_rt()always WRITE_ONCE()s first->fib6_nsiblings to 0 beforelist_del_rcu(), so an inside-loop check is a reliable detach signal.[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slotOn the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] isreserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()populates V2 entries starting at index 1, so when no V1 device isselected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==NULL and ism_chid[0] == 0.smc_v2_determine_accepted_chid() then matches the peer's CHID againstthe array starting from index 0 using the CHID alone. A maliciouspeer replying to a SMC-Dv2-only proposal with d1.chid == 0 matchesthe empty slot, ini->ism_selected becomes 0, and the subsequentism_dev[0]->lgr_lock dereference in smc_conn_create() faults atoffsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64Require ism_dev[i] to be non-NULL before accepting a CHID match.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tp_meter: directly shut down timer on cleanupbatadv_tp_sender_cleanup() was calling timer_delete_sync() followed bytimer_delete() to guard against the timer handler re-arming itself betweenthe two calls. This double-deletion hack relied on the sending status beingset to 0 to suppress re-arming.Replace both calls with a single timer_shutdown_sync(). This function bothwaits for any running timer callback to complete (like timer_delete_sync())and permanently disarms the timer so it cannot be re-armed afterwards,making re-arming prevention unconditional and self-documenting.The re-arming property is also required because otherwise:1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup()3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: capture fast-RX rate before mesh reuses skb->cbieee80211_invoke_fast_rx() reads RX status throughIEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storagethat ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In theunicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info));on the same skb the caller still names via rx->skb, then eitherqueues the skb for TX (success) or kfree_skb()'s it (no-route)before returning RX_QUEUED. The caller's RX_QUEUED arm thencalls sta_stats_encode_rate(status) on memory that is eitherzeroed (success path) or freed (no-route path). The latter isKASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.Fix by encoding the rate from status before invokingieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a valuecaptured while status was still backed by valid memory.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: require source read access for duplicate extentsFSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly tovfs_clone_file_range() or vfs_copy_file_range() without checking the SMBaccess mask granted to the source handle. A handle opened with attributeaccess can consequently be used to copy file contents into anattacker-readable destination.Require FILE_READ_DATA on the source handle before either VFS operation,matching other ksmbd data-copy paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: serialize QUERY_DIRECTORY requests per filesmb2_query_dir() stores a pointer to its stack-allocated private data inthe ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using thesame file handle can overwrite this pointer while an iterate_dir() callbackis still using it, resulting in a stack use-after-free.Add a per-file mutex and hold it while accessing the shared directoryenumeration state. The lock covers scan restart, dot entry state,readdir_data setup and iteration, and response construction. This preventsanother request from replacing readdir_data.private before the currentrequest has finished using it and also serializes the shared file position.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gtp: check skb_pull_data() return in gtp1u_send_echo_resp()gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Itscaller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). Fora 16-19 byte echo request the pull fails and returns NULL withoutadvancing skb->data; execution continues, and the following skb_push()plus the IP header pushed by iptunnel_xmit() move skb->data belowskb->head, tripping skb_under_panic().Fix it by dropping the packet when skb_pull_data() fails. skbuff: skb_under_panic: ... kernel BUG at net/core/skbuff.c:214! Call Trace: skb_push (net/core/skbuff.c:2648) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82) gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920) udp_queue_rcv_one_skb (net/ipv4/udp.c:2388) ... Kernel panic - not syncing: Fatal exception in interrupt
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Unknown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- samba-client-libs < 4.19.8+git.501.67274891bc-150600.3.29.1 (version in image is 4.19.8+git.473.51d12fd320c-150600.3.26.1).
Description: `xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: tarfile.data_filter could be bypassed using crafted link entries, including symlinks with empty or directory-like names, to redirect later archive members outside the intended extraction directory. This allowed a malicious tar archive to cause tarfile.extractall() to write files outside the destination directory, subject to the permissions of the extracting process.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: libcurl had a flaw that when instructed to clear proxy authenticationcredentials which made it not do so, leaving the old credentials around to getused for subsequent transfers that should not know nor use them.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: When a user invokes curl using a schemeless URL combined with`--proto-default` sftp (or scp), a disconnect occurs between the tool layerand libcurl. The tool layer incorrectly infers the URL scheme, whicherroneously bypasses the initialization of critical SSH security options likeCURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, thelibcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishesthe connection via SFTP/SCP as specified. Because the tool layer skipped thesecurity configuration, these SSH host verification options are silentlyomitted, causing curl to connect to an unverified SSH remote host withoutthrowing an error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: A relative path traversal bug problem when processing repository metadata in libzypp before 17.38.10 could be used by remote attackers supplying repositories to overwrite files on the system, leading to denial of service or privilege escalation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsolv-tools-base < 0.7.39-150600.8.24.1 (version in image is 0.7.34-150600.8.19.2).
Description: A use-after-free vulnerability exists within the DNS-over-HTTPS implementation.This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.BIND 9 versions 9.18.0 through 9.18.48 and 9.18.11-S1 through 9.18.48-S1 are NOT affected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.49-150600.3.26.1 (version in image is 9.18.33-150600.3.21.1).
Description: The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege escalation in programs using the idna package. For example, a program which performs privilege checks on the ASCII hostname may reject "example.com" but permit "xn--example-.com". If that program subsequently converts the ASCII hostname to Unicode, it will inadvertently permits access to the Unicode name "example.com".
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.73.1 (version in image is 20250506.01-150000.1.63.1).
Description: acl before version 2.4.0 contains a symlink traversal vulnerability in the libacl pathname-based functions acl_get_file(), acl_set_file(), acl_extended_file(), and acl_delete_def_file() that allows local attackers to escalate privileges by replacing any pathname component with a symbolic link. Attackers who control any component of a pathname processed by a privileged caller can redirect ACL read or write operations to arbitrary files or directories, enabling unauthorized manipulation of access control lists and local privilege escalation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libacl1 > 0-0 (version in image is 2.2.52-4.3.1).
Description: acl before version 2.4.0 contains a time-of-check to time-of-use (TOCTOU) race condition vulnerability that allows local attackers to escalate privileges by replacing a pathname component with a symbolic link between an lstat() check and subsequent symlink-following operations such as stat(), chown(), chmod(), acl_get_file(), and acl_set_file(). Attackers who control a pathname component can redirect file access control list operations to arbitrary files when getfacl, setfacl, or chacl is invoked by a privileged process over an attacker-controlled path, resulting in local privilege escalation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libacl1 > 0-0 (version in image is 2.2.52-4.3.1).
Description: attr before version 2.6.0 contains a symlink traversal vulnerability in the getfattr and setfattr utilities that allows local attackers to escalate privileges by replacing a pathname component with a symbolic link during directory hierarchy traversal. Attackers who control a pathname component can redirect getfattr and setfattr operations to arbitrary files by substituting a symlink, leading to local privilege escalation when getfattr or setfattr is invoked by a privileged process over an attacker-controlled path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libacl1 > 0-0 (version in image is 2.2.52-4.3.1).
Description: A vulnerability exists where a new transfer that uses STARTTLS to upgrade theconnection might reuse an existing live connection even though the TLSconfiguration mismatches so it should not.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: libcurl would reuse a previously created connection even when some mTLS configrelated option had been changed that should have prohibited reuse.libcurl keeps previously used connections in a connection pool for subsequenttransfers to reuse if one of them matches the setup. However, some TLSsettings related to client certificates were left out from the configurationmatch checks, making them match too easily. In particular options related tothe private key.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: When a libcurl-based application performs transfers via `SCP://` or `SFTP://`and utilizes the `CURLOPT_SSH_KEYFUNCTION` callback, it may silently accept anuntrusted server. This vulnerability occurs when a server presents a host keytype that does not match the specific key type already recorded for that hostin the `known_hosts` file. Instead of rejecting the mismatch, the callbackmechanism fails to properly enforce the restriction, allowing the connectionto succeed without warning and risking a potential man-in-the-middle attack.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: prevent potential out-of-bounds writes in handle_auth_session_key()The len field originates from untrusted network packets. Boundarychecks have been added to prevent potential out-of-bounds writes whendecrypting the connection secret or processing service tickets.[ idryomov: changelog ]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libruby2_5-2_5 > 0-0 (version in image is 2.5.9-150000.4.54.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds accessNumber of MW LUTs depends on NTB configuration and can be set to MAX_MWS,This patch protects against invalid index out of bounds access to mw_sizesWhen invalid access print message to user that configuration is not valid.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: ccp - copy IV using skcipher ivsizeAF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IVbuffer while RFC3686 skciphers expose an 8-byte IV, so the restoreoverruns the provided buffer.Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vce: Prevent partial address patchesIn the case that only one of lo/hi is valid, the patching could resultin a bad address written to in FW.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping levelWhen recovering hugepages in the shadow MMU, verify that the base gfn ofthe shadow page is actually contained within the target memslot, *before*querying the max mapping level given the shadow page's gfn. Failure topre-check the validity of the gfn can lead to an out-of-bounds access tothe slot's lpage_info (which typically manifests as a host #PF because thelpage_info is vmalloc'd) if the guest creates a hugepage mapping (in itsPTEs) that extends "below" the bounds of a memslot.When faulting in memory for a guest, and the size of the guest mapping isgreater than KVM's (current) max mapping, then KVM will create a "direct"shadow page (direct in that there are no gPTEs to shadow, and so the targetgfn is a direct calculation given the base gfn of the shadow page). Thehugepage recovery flow looks for such direct shadow pages, as forcing 4KiBmappings when dirty logging generates the guest > host mapping size case.When the 4KiB restriction is lifted, then KVM can replace the shadow pagewith a hugepage.But if KVM originally used a smaller mapping than the guest because therange of memory covered by the guest hugepage exceeds the bounds of amemslot, then KVM will link a direct shadow page with a gfn that is outsidethe bounds of the memslot being used to fault in memory. The rmap entryadded for the leaf mapping is correct and within bounds, but the gfn of theleaf SPTE's parent shadow page will be out of bounds. BUG: unable to handle page fault for address: ffffc90000806ffc #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0 Oops: Oops: 0000 [#1] SMP CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm] Call Trace: kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm] kvm_set_memslot+0x1ee/0x590 [kvm] kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm] kvm_vm_ioctl+0x9bf/0x15d0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0xbb0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f21c0f1a9bf Don't bother pre-checking the bounds of the potential hugepage, i.e. don'tcheck that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is alsowithin the memslot, as the checks performed by kvm_mmu_max_mapping_level()are a superset of the basic bounds checks. I.e. pre-checking the fullrange would be a dubious micro-optimization.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Moby is an open source container framework. In versions prior to 29.5.1 and in moby/moby v2 prior to v2.0.0-beta.14, when a compressed archive is uploaded to a container via `PUT /containers/{id}/archive` or piped through `docker cp -`, the daemon resolves decompression binaries (such as `xz` or `unpigz`) from the container's filesystem rather than the host's due to incorrect ordering of operations. A malicious container image containing a trojanized decompression binary can achieve arbitrary code execution with full daemon privileges, including host root UID and unrestricted capabilities, when a user uploads a compressed (xz or gzip) archive into that container. This issue is fixed in Docker Engine 29.5.1 and moby/moby v2.0.0-beta.14. Workarounds include only running containers from trusted images, using authorization plugins to restrict access to the `PUT /containers/{id}/archive` endpoint, and avoiding piping compressed archives into containers created from untrusted images
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker < 29.4.0_ce-150000.253.1 (version in image is 29.4.0_ce-150000.250.1).
Description: A relative path traversal in the "keyhint" option in repomd.xml parsing of libzypp before 17.38.12 can be used by attackers able to supply a malicious repository to inject or overwrite files in the target system as root.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsolv-tools-base < 0.7.39-150600.8.24.1 (version in image is 0.7.34-150600.8.19.2).
Description: A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- glib2-tools > 0-0 (version in image is 2.78.6-150600.4.35.1).
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.52, an out-of-bounds read vulnerability in libpng's simplified API allows reading up to 1012 bytes beyond the png_sRGB_base[512] array when processing valid palette PNG images with partial transparency and gamma correction. The PNG files that trigger this vulnerability are valid per the PNG specification; the bug is in libpng's internal state management. Upgrade to libpng 1.6.52 or later.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: ulpi: fix double free in ulpi_register_interface() error pathWhen device_register() fails, ulpi_register() calls put_device() onulpi->dev.The device release callback ulpi_dev_release() drops the OF nodereference and frees ulpi, but the current error path inulpi_register_interface() then calls kfree(ulpi) again, causing adouble free.Let put_device() handle the cleanup through ulpi_dev_release() andavoid freeing ulpi again in ulpi_register_interface().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: GNU gzip contains a vulnerability in the gzexe utility related to insecure temporary file handling. When the mktemp utility is not available in the user's PATH, gzexe falls back to constructing a temporary file path based solely on the process ID (PID). This predictable filename is created without exclusive access or existence checks.A local attacker can pre-create the predicted temporary file path as a symbolic link pointing to an arbitrary file writable by the victim. When gzexe runs, it follows the symlink and overwrites the target file, resulting in a time-of-check to time-of-use (TOCTOU) condition that allows arbitrary file overwrite.This issue has been fixed in the commit 4e6f8b24ab823146ab8776f0b7fe486ab34d4269
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- gzip < 1.10-150200.13.1 (version in image is 1.10-150200.10.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: Fix watch_id bounds checking in debug address watch v2The address watch clear code receives watch_id as an unsigned value(u32), but some helper functions were using a signed int and checkedbits by shifting with watch_id.If a very large watch_id is passed from userspace, it can be convertedto a negative value. This can cause invalid shifts and may accessmemory outside the watch_points array.drm/amdkfd: Fix watch_id bounds checking in debug address watch v2Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES beforeusing it. Also use BIT(watch_id) to test and clear bits safely.This keeps the behavior unchanged for valid watch IDs and avoidsundefined behavior for invalid ones.Fixes the below:drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncappeddrivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))kfd_dbg_owns_dev_watch_id() doesn't check for negative values so ifwatch_id is larger than INT_MAX it leads to a buffer overflow.(Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id);v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fanotify: fix false positive on permission eventsfsnotify_get_mark_safe() may return false for a mark on an unrelated group,which results in bypassing the permission check.Fix by skipping over detached marks that are not in the current group.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: Clear VRAM on allocation to prevent stale data exposureKFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASEbut not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocatedVRAM with stale data from prior use observable by compute kernels.The GEM ioctl path already sets VRAM_CLEARED for all userspaceallocations via amdgpu_gem_create_ioctl() andamdgpu_mode_dumb_create(). The KFD path was missing this flag,allowing stale page table remnants to leak into user buffers.This causes crashes in RCCL P2P transport where non-zero data inptrExchange/head/tail fields corrupts the protocol handshake.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg("String too long"), the raw-file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr(). With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-buffer-overflow. This vulnerability is fixed in 1.8.2.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ip6_vti: set netns_immutable on the fallback device.john1988 and Noam Rathaus reported that vti6_init_net() does not set thenetns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)correctly set this flag during their fallback device initialization toprevent them from being moved to another network namespace.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: serialize accept_q accessbt_sock_poll() walks the accept queue without synchronization, whilechild teardown can unlink the same socket and drop its last reference.The unsynchronized accept queue walk has existed since the initialBluetooth import.Protect accept_q with a dedicated lock for queue updates and polling.Also rework bt_accept_dequeue() to take temporary child references underthe queue lock before dropping it and locking the child socket.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: fix listxattr handling when the buffer is full[BUG]If an OCFS2 inode has both inline and block-based xattrs, listxattr()can return a size larger than the caller's buffer when the inline namesconsume that buffer exactly.kernel BUG at mm/usercopy.c:102!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTIRIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_object_size include/linux/ucopysize.h:22 [inline] check_copy_size include/linux/ucopysize.h:59 [inline] copy_to_user include/linux/uaccess.h:219 [inline] listxattr+0xb0/0x170 fs/xattr.c:926 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x137/0x320 fs/xattr.c:988 __do_sys_listxattr fs/xattr.c:1001 [inline] __se_sys_listxattr fs/xattr.c:998 [inline] __x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998 ...[CAUSE]Commit 936b8834366e ("ocfs2: Refactor xattr list and removeocfs2_xattr_handler().") replaced the old per-handler list accountingwith ocfs2_xattr_list_entry(), but it kept using size == 0 to detectprobe mode.That assumption stops being true once ocfs2_listxattr() finishes theinline-xattr pass. If the inline names fill the caller buffer exactly,the block-xattr pass runs with a non-NULL buffer and a remaining size ofzero. ocfs2_xattr_list_entry() then skips the bounds check, keepscounting block names, and returns a positive size larger than thesupplied buffer.[FIX]Detect probe mode by testing whether the destination buffer pointer isNULL instead of whether the remaining size is zero.That restores the pre-refactor behavior and matches the OCFS2 getxattrhelpers. Once the remaining buffer reaches zero while more names areleft, the block-xattr pass now returns -ERANGE instead of reporting asize larger than the allocated list buffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm log: fix out-of-bounds write due to region_count overflowThe local variable region_count in create_log_context() is declared asunsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).When a device-mapper target has a sufficiently large ti->len with a smallregion_size, the division result can exceed UINT_MAX. The truncatedvalue is then used to calculate bitset_size, causing clean_bits,sync_bits, and recovering_bits to be allocated far smaller than neededfor the actual number of regions.Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) useregion indices derived from the full untruncated region space, causingout-of-bounds writes to kernel heap memory allocated by vmalloc.This can be reproduced by creating a mirror target whose region_countoverflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0'The status output confirms the truncation (sync_count=1 instead of4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed!Fix by widening the local region_count to sector_t and adding anexplicit overflow check before the value is assigned to lc->region_count.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rspl2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holdingl2cap_chan_lock(). Every other l2cap_chan_del() caller in the fileacquires the lock first. A remote BLE device can send a craftedL2CAP ECRED reconfiguration response to corrupt the channel listwhile another thread is iterating it.Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),and l2cap_chan_unlock() and l2cap_chan_put() after, matching thepattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtractionAdd guards to ensure ie_length is large enough before subtractingfixed IE offsets to prevent unsigned integer underflow.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: bnep: reject short frames before parsingA BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads thepacket type byte immediately and, for control packets, reads the controlopcode and setup UUID-size byte before proving that those bytes arepresent. bnep_rx_control() also dereferences the control opcode withoutrejecting an empty control payload.Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULLreturn gates each dereference. Split the control handler so the framepath can pass an opcode that has already been pulled, and keep thebyte-buffer wrapper for extension control payloads.For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling thesetup payload. struct bnep_setup_conn_req carries destination and sourceservice UUIDs after that byte, each uuid_size bytes, so the parser nowdocuments that tuple explicitly instead of leaving the pull length as anopaque multiplication.Validation reproduced this kernel report:KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790The buggy address belongs to the object at ffff88800c0f7908 which belongsto the cache kmalloc-8 of size 8The buggy address is located 0 bytes to the right of allocated 1-byteregion [ffff88800c0f7908, ffff88800c0f7909)Read of size 1Call trace: dump_stack_lvl+0xb3/0x140 (?:?) print_address_description+0x57/0x3a0 (?:?) bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306) print_report+0xb9/0x2b0 (?:?) __virt_addr_valid+0x1ba/0x3a0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) kasan_addr_to_slab+0x21/0x60 (?:?) kasan_report+0xe0/0x110 (?:?) process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200) worker_thread+0x65c/0xe40 (?:?) __kthread_parkme+0x184/0x230 (?:?) kthread+0x35e/0x470 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) ret_from_fork+0x586/0x870 (?:?) __switch_to+0x74f/0xdc0 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()When fbcon_do_set_font() fails (e.g., due to a memory allocation failureinside vc_resize() under heavy memory pressure), it jumps to the `err_out`label to roll back the console state. However, the current rollback logicforgets to restore the `hi_font` state, leading to a severe state machinecorruption.Earlier in the function, `set_vc_hi_font()` might be called to change`vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()`subsequently fails, the `err_out` path restores `vc_font.charcount`but entirely skips rolling back the `vc_hi_font_mask` and the screenbuffer.This mismatch leaves the terminal in a desynchronized state. Because`vc_hi_font_mask` remains set, the VT subsystem will still acceptcharacter indices greater than 255 from userspace and write them to thescreen buffer. Subsequent rendering calls (e.g., `fbcon_putcs()`) willthen use these inflated indices to access the reverted, 256-characterfont array, leading to a deterministic out-of-bounds read and potentialkernel memory disclosure.Fix this by adding the missing rollback logic for the `hi_font` maskand screen buffer in the error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Unknown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- samba-client-libs < 4.19.8+git.501.67274891bc-150600.3.29.1 (version in image is 4.19.8+git.473.51d12fd320c-150600.3.26.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned()Drop a BUG_ON() that has been reachable since it was first added, way backin 2009, and instead use get_unaligned() to perform potentially-unalignedaccesses.For a given store, KVM x86's emulator tracks the entire value in thedestination operand, x86_emulate_ctxt.dst. If the destination is memory,and the target splits multiple pages and/or is emulated MMIO, then KVMhandles each fragment independently. E.g. on a page split starting at pageoffset 0xffc, KVM writes 4 bytes to the first page, then the remainingbytes to the second page, using ctxt->dst as the source for both (withappropriate offsets).If the destination splits a page *and* hits emulated MMIO on the secondpage, then KVM will complete the write to the first page, then emulate theMMIO access to the second page. If there is a datamatch-enabled ioeventfdat offset 0 of the second page, then KVM will process the remainder of thestore as a potential ioeventfd signal.Putting it all together, if the guest emits a store that splits a pagestarting at page offset N, and the second page has a datamatch-enabledioeventfd at offset 0, then KVM will check for datamatch using&dst.valptr[N] as the source. Due to dst (and thus dst.valptr) being32-byte aligned, if N is not aligned to @len, the BUG_ON() fires.E.g. with a 16-byte store at page offset 0xffc, to an ioeventfd of len 8,all initial checks in ioeventfd_in_range() will succeed, and the BUG_ON()fires due to @val being 4-byte aligned, but not 8-byte aligned. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/../../../virt/kvm/eventfd.c:783! Oops: invalid opcode: 0000 [#1] SMP CPU: 0 UID: 1000 PID: 615 Comm: repro Not tainted 7.1.0-rc2-ff238429d1ea #365 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:ioeventfd_write+0x6c/0x70 [kvm] Call Trace: __kvm_io_bus_write+0x85/0xb0 [kvm] kvm_io_bus_write+0x53/0x80 [kvm] vcpu_mmio_write+0x66/0xf0 [kvm] emulator_read_write_onepage+0x12a/0x540 [kvm] emulator_read_write+0x109/0x2b0 [kvm] x86_emulate_insn+0x4f8/0xfb0 [kvm] x86_emulate_instruction+0x181/0x790 [kvm] kvm_mmu_page_fault+0x313/0x630 [kvm] vmx_handle_exit+0x18a/0x590 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc81/0x1c90 [kvm] kvm_vcpu_ioctl+0x2d5/0x970 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0x890 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f19c931a9bf Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]---In a perfect world, the fix would be to simply delete the BUG_ON(), as KVMx86 doesn't perform alignment checks on "normal" memory accesses at CPL0.Sadly, C99 ruins all the fun; while the x86 architecture plays nice,dereferencing an unaligned pointer directly is undefined behavior in C,e.g. triggers splats when running with CONFIG_UBSAN_ALIGNMENT=y.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ip_gre: require CAP_NET_ADMIN in the device netns for changelinkA tunnel changelink() operates on at most two netns, dev_net(dev) andthe tunnel link netns t->net. They differ once the device is created inor moved to a netns other than the one the request runs in. The rtnlchangelink path checks CAP_NET_ADMIN only against dev_net(dev), so acaller privileged there but not in t->net can rewrite a tunnel thatlives in t->net.Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() innet/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and isskipped when the link netns is dev_net(dev), where the rtnl path alreadychecked it. The other patches in this series use the same helper.Gate ipgre_changelink() and erspan_changelink() with it, at the top ofthe op before any attribute is parsed, because the parsers update livetunnel fields first. ipgre_netlink_parms() sets t->collect_md beforeip_tunnel_changelink() runs.Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net invti6_siocdevprivate().") added the same check on the ioctl path. Thisadds it on RTM_NEWLINK.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()Two latent bugs in the Text-phase handler, both present since theoriginal LIO integration in commit e48354ce078c ("iscsi-target: AddiSCSI fabric support for target v4.1"):1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc().2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together.Both fixes are one-liners. The Text PDU state machine is unchanged andthe wire protocol is unaffected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: validate extension header length before copying to cmsgip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR}cmsgs (and their IPV6_2292* legacy counterparts) by trusting theon-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length.The length was validated only at parse time (ipv6_parse_hopopts(),etc.). An nftables payload-write expression can rewrite hdrlen afterparsing and before the skb reaches recvmsg; the write itself isin-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040bytes from an 8-byte header. nftables is reachable from anunprivileged user namespace, so this is an unprivilegedslab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620Add ipv6_get_exthdr_len() which validates that at least two bytesare accessible before reading the hdrlen field, then checks thecomputed length against skb_tail_pointer(skb), returning 0 onfailure. Extension headers are kept in the linear skb area bypskb_may_pull() during input, so skb_tail_pointer() is the correctbound.Use ipv6_get_exthdr_len() at all non-AH call sites: the fivestandalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR)and the three standard cases in the extension-header walk loop(DSTOPTS, ROUTING, default). AH retains an inline bounds checkbecause its length formula differs ((ptr[1]+2)<<2).The walk loop also gets a pre-read bounds check at the top tovalidate ptr before any case accesses ptr[0] or ptr[1].When the walk loop detects a corrupted header, return from thefunction instead of continuing to process later socket options.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: hsr: fix potential OOB access in supervision frame handlingEnsure the entire TLV header is linearized before access by addingsizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this,a truncated frame could cause an out-of-bounds access.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc()A race condition exists in the NFC LLCP connection state machine wherethe connection acceptance packet (CC) can be processed concurrently withsocket release. This can lead to a use-after-free of the socket object.When nfc_llcp_recv_cc() moves the socket from the connecting_socketslist to the sockets list, it does so without holding the socket lock.If llcp_sock_release() is executing concurrently, it might have alreadyunlinked the socket and dropped its references, which can result innfc_llcp_recv_cc() linking a freed socket into the live list.Fix this by holding lock_sock() during the state transition and listmovement in nfc_llcp_recv_cc(). After acquiring the lock, check ifthe socket is still hashed to ensure it hasn't already been unlinkedand marked for destruction by the release path. This aligns the lockingpattern with recv_hdlc() and recv_disc().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: llcp: Fix use-after-free in llcp_sock_release()llcp_sock_release() unconditionally unlinks the socket from the localsockets list. However, if the socket is still in connecting state, itis on the connecting list.Fix this by checking the socket state and unlinking from the correct list.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bitsUserspace can restore an ITS Device Table Entry whose Size field encodesmore EventID bits than the virtual ITS supports. The live MAPD pathrejects that state, but vgic_its_restore_dte() accepts it and stores theout-of-range value in dev->num_eventid_bits.Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS beforeallocating the device. This mirrors the MAPD check and prevents therestored state from reaching vgic_its_restore_itt(), where the uncheckedvalue can be converted into an oversized scan_its_table() range.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ifb: report ethtool stats over num_tx_queuesifb_dev_init() allocates dp->tx_private to dev->num_tx_queuesentries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFBper-queue RX and TX stats live in those entries: ifb_xmit() updatestxp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updatestxp->tx_stats, and ifb_stats64() aggregates both overdev->num_tx_queues.The ethtool stats callbacks instead size and walk the per-queuestats with dev->real_num_rx_queues and dev->real_num_tx_queues. Withan asymmetric device where the RX queue count exceeds the TX queuecount, for example: ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb ethtool -S ifb10ifb_get_ethtool_stats() indexes past the tx_private allocation andcopies adjacent slab data through ETHTOOL_GSTATS.Use dev->num_tx_queues consistently for the stats strings, thestats count, and the stats data walks. This reports one RX statsgroup and one TX stats group for each backing ifb_q_private entry,which is the queue set IFB can actually populate.Reproduced under UML+KASAN at v7.1-rc2: BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae Read of size 8 at addr 0000000062dbd228 by task ethtool/36 ifb_fill_stats_data+0x3c/0xae ifb_get_ethtool_stats+0xc0/0x129 __dev_ethtool+0x1ca5/0x363c dev_ethtool+0x123/0x1b3 dev_ioctl+0x56c/0x744 sock_do_ioctl+0x15f/0x1b2 sock_ioctl+0x4d5/0x50a sys_ioctl+0xd8b/0xde9With the patch applied, the same UML+KASAN repro is silent andethtool -S ifb10 reports only the stats backed by the singleallocated tx_private entry.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loopThe IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) eachiteration but only guards on i < pkt_len. When a malicious AP sends anAssocResponse whose last IE has only one byte remaining in the frame(the element_id byte lands at pkt_len-1), the loop reads pIE->lengthfrom pframe[pkt_len], which is one byte past the allocated receive buffer.Additionally, even when the header bytes are in bounds, pIE->lengthitself can extend the data window beyond pkt_len, silently passing atruncated IE to the handler functions.Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tipc: fix out-of-bounds read in broadcast Gap ACK blocksA broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in itsdata area. tipc_get_gap_ack_blks() only verifies that the record's lenfield is self-consistent with its ugack_cnt/bgack_cnt counts(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not checkthat the record actually fits in the message data area, msg_data_sz().The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)break;"), but the broadcast caller tipc_bcast_sync_rcv() discards thereturned size, so tipc_link_advance_transmq() copies the record off thereceive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC);A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with oneordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so itsdata area is short, carrying a Gap ACK record with len = 0x400,bgack_cnt = 0xff and ugack_cnt = 0. len then equalsstruct_size(p, gacks, 255), so the consistency check passes and ga isnon-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes outof the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)The copied-out bytes are subsequently consumed as gap/ack values, butthe read is already out of bounds at the kmemdup() regardless of howthey are used.The unicast STATE path drops such a message: "if (glen > dlen) break;"skips the rest of STATE_MSG handling and the skb is freed. Make thebroadcast path drop it too. tipc_bcast_sync_rcv() now bounds the recordagainst msg_data_sz() and, when it does not fit, reports it back throughtipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather thanprocessed. ga is not cleared on this path: ga == NULL already means"legacy peer without Selective ACK", a distinct legitimate state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Use device rbtree in iopf reporting pathThe existing I/O page fault handler currently locates the PCI device bycalling pci_get_domain_bus_and_slot(). This function searches the listof all PCI devices until the desired device is found. To improve lookupefficiency, replace it with device_rbtree_find() to search the devicewithin the probed device rbtree.The I/O page fault is initiated by the device, which does not have anysynchronization mechanism with the software to ensure that the devicestays in the probed device tree. Theoretically, a device could be releasedby the IOMMU subsystem after device_rbtree_find() and beforeiopf_get_dev_fault_param(), which would cause a use-after-free problem.Add a mutex to synchronize the I/O page fault reporting path and the IOMMUrelease device path. This lock doesn't introduce any performance overhead,as the conflict between I/O page fault reporting and device releasing isvery rare.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpiolib: cdev: Fix use after free in lineinfo_changed_notifyThe use-after-free issue occurs as follows: when the GPIO chip device fileis being closed by invoking gpio_chrdev_release(), watched_lines is freedby bitmap_free(), but the unregistration of lineinfo_changed_nb notifierchain failed due to waiting write rwsem. Additionally, one of the GPIOchip's lines is also in the release process and holds the notifier chain'sread rwsem. Consequently, a race condition leads to the use-after-free ofwatched_lines.Here is the typical stack when issue happened:[free]gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule()[use]st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after freeThe side effect of the use-after-free issue is that a GPIO line event isbeing generated for userspace where it shouldn't. However, since the chrdevis being closed, userspace won't have the chance to read that event anyway.To fix the issue, call the bitmap_free() function after the unregistrationof lineinfo_changed_nb notifier chain.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: Use refcount_inc_not_zero() in tcp_twsk_unique().Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique()with nice analysis.Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation fortimewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket'ssk_refcnt after putting it into ehash and releasing the bucket lock.Thus, there is a small race window where other threads could try toreuse the port during connect() and call sock_hold() in tcp_twsk_unique()for the TIME-WAIT socket with zero refcnt.If that happens, the refcnt taken by tcp_twsk_unique() is overwrittenand sock_put() will cause underflow, triggering a real use-after-freesomewhere else.To avoid the use-after-free, we need to use refcount_inc_not_zero() intcp_twsk_unique() and give up on reusing the port if it returns false.[0]:refcount_t: addition on 0; use-after-free.WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023RIP: 0010:refcount_warn_saturate+0xe5/0x110Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0PKRU: 55555554Call Trace: ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80RIP: 0033:0x7f62c11a885dCode: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002aRAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885dRDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: fix __dst_negative_advice() race__dst_negative_advice() does not enforce proper RCU rules whensk->dst_cache must be cleared, leading to possible UAF.RCU rules are that we must first clear sk->sk_dst_cache,then call dst_release(old_dst).Note that sk_dst_reset(sk) is implementing this protocol correctly,while __dst_negative_advice() uses the wrong order.Given that ip6_negative_advice() has special logicagainst RTF_CACHE, this means each of the three ->negative_advice()existing methods must perform the sk_dst_reset() themselves.Note the check against NULL dst is centralized in__dst_negative_advice(), there is no need to duplicateit in various callbacks.Many thanks to Clement Lecigne for tracking this issue.This old bug became visible after the blamed commit, using UDP sockets.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:futex: Prevent use-after-free during requeue-PIsyzbot managed to trigger the following race: T1 T2 futex_wait_requeue_pi() futex_do_wait() schedule() futex_requeue() futex_proxy_trylock_atomic() futex_requeue_pi_prepare() requeue_pi_wake_futex() futex_requeue_pi_complete() /* preempt */ * timeout/ signal wakes T1 * futex_requeue_pi_wakeup_sync() // Q_REQUEUE_PI_LOCKED futex_hash_put() // back to userland, on stack futex_q is garbage /* back */ wake_up_state(q->task, TASK_NORMAL);In this scenario futex_wait_requeue_pi() is able to leave without usingfutex_q::lock_ptr for synchronization.This can be prevented by reading futex_q::task before updating thefutex_q::requeue_state. A reference on the task_struct is not neededbecause requeue_pi_wake_futex() is invoked with a spinlock_t held whichimplies a RCU read section.Even if T1 terminates immediately after, the task_struct will remain validduring T2's wake_up_state(). A READ_ONCE on futex_q::task beforefutex_requeue_pi_complete() is enough because it ensures that the variableis read before the state is updated.Read futex_q::task before updating the requeue state, use it for thefollowing wakeup.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: delete x->tunnel as we delete xThe ipcomp fallback tunnels currently get deleted (from the variouslists and hashtables) as the last user state that needed that fallbackis destroyed (not deleted). If a reference to that user state stillexists, the fallback state will remain on the hashtables/lists,triggering the WARN in xfrm_state_fini. Because of those remainingreferences, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_statesynchronously on net exit path") is not complete.We recently fixed one such situation in TCP due to defered freeing ofskbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as wecurrently drop dst")). This can also happen due to IP reassembly: skbswith a secpath remain on the reassembly queue until netnsdestruction. If we can't guarantee that the queues are flushed by thetime xfrm_state_fini runs, there may still be references to a (user)xfrm_state, preventing the timely deletion of the correspondingfallback state.Instead of chasing each instance of skbs holding a secpath one by one,this patch fixes the issue directly within xfrm, by deleting thefallback state as soon as the last user state depending on it has beendeleted. Destruction will still happen when the final reference isdropped.A separate lockdep class for the fallback state is required sincewe're going to lock x->tunnel while x is locked.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: Fix unlikely race in gdlm_put_lockIn gdlm_put_lock(), there is a small window of time in which theDFL_UNMOUNT flag has been set but the lockspace hasn't been released,yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().To prevent it from dereferencing freed glock objects, only free theglock if the lockspace has actually been released.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fix a race in mptcp_pm_del_add_timer()mptcp_pm_del_add_timer() can call sk_stop_timer_sync(sk, &entry->add_timer)while another might have free entry already, as reported by syzbot.Add RCU protection to fix this issue.Also change confusing add_timer variable with stop_timer boolean.syzbot report:BUG: KASAN: slab-use-after-free in __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616Read of size 4 at addr ffff8880311e4150 by task kworker/1:1/44CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted syzkaller #0 PREEMPT_{RT,(full)}Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025Workqueue: events mptcp_workerCall Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616 sk_stop_timer_sync+0x1b/0x90 net/core/sock.c:3631 mptcp_pm_del_add_timer+0x283/0x310 net/mptcp/pm.c:362 mptcp_incoming_options+0x1357/0x1f60 net/mptcp/options.c:1174 tcp_data_queue+0xca/0x6450 net/ipv4/tcp_input.c:5361 tcp_rcv_established+0x1335/0x2670 net/ipv4/tcp_input.c:6441 tcp_v4_do_rcv+0x98b/0xbf0 net/ipv4/tcp_ipv4.c:1931 tcp_v4_rcv+0x252a/0x2dc0 net/ipv4/tcp_ipv4.c:2374 ip_protocol_deliver_rcu+0x221/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:239 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6079 [inline] __netif_receive_skb+0x143/0x380 net/core/dev.c:6192 process_backlog+0x31e/0x900 net/core/dev.c:6544 __napi_poll+0xb6/0x540 net/core/dev.c:7594 napi_poll net/core/dev.c:7657 [inline] net_rx_action+0x5f7/0xda0 net/core/dev.c:7784 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] __local_bh_enable_ip+0x1a0/0x2e0 kernel/softirq.c:302 mptcp_pm_send_ack net/mptcp/pm.c:210 [inline] mptcp_pm_addr_send_ack+0x41f/0x500 net/mptcp/pm.c:-1 mptcp_pm_worker+0x174/0x320 net/mptcp/pm.c:1002 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Allocated by task 44: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:400 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:417 kasan_kmalloc include/linux/kasan.h:262 [inline] __kmalloc_cache_noprof+0x1ef/0x6c0 mm/slub.c:5748 kmalloc_noprof include/linux/slab.h:957 [inline] mptcp_pm_alloc_anno_list+0x104/0x460 net/mptcp/pm.c:385 mptcp_pm_create_subflow_or_signal_addr+0xf9d/0x1360 net/mptcp/pm_kernel.c:355 mptcp_pm_nl_fully_established net/mptcp/pm_kernel.c:409 [inline] __mptcp_pm_kernel_worker+0x417/0x1ef0 net/mptcp/pm_kernel.c:1529 mptcp_pm_worker+0x1ee/0x320 net/mptcp/pm.c:1008 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245Freed by task 6630: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 __kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:587 kasan_save_free_info mm/kasan/kasan.h:406 [inline] poison_slab_object m---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fix race condition in mptcp_schedule_work()syzbot reported use-after-free in mptcp_schedule_work() [1]Issue here is that mptcp_schedule_work() schedules a work,then gets a refcount on sk->sk_refcnt if the work was scheduled.This refcount will be released by mptcp_worker().[A] if (schedule_work(...)) {[B] sock_hold(sk); return true; }Problem is that mptcp_worker() can run immediately and complete before [B]We need instead : sock_hold(sk); if (schedule_work(...)) return true; sock_put(sk);[1]refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25Call Trace: __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] sock_hold include/net/sock.h:816 [inline] mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943 mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316 call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747 expire_timers kernel/time/timer.c:1798 [inline] __run_timers kernel/time/timer.c:2372 [inline] __run_timer_base+0x648/0x970 kernel/time/timer.c:2384 run_timer_base kernel/time/timer.c:2393 [inline] run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0xcf/0x190 kernel/softirq.c:1138 smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tipc: Fix use-after-free in tipc_mon_reinit_self().syzbot reported use-after-free of tipc_net(net)->monitors[]in tipc_mon_reinit_self(). [0]The array is protected by RTNL, but tipc_mon_reinit_self()iterates over it without RTNL.tipc_mon_reinit_self() is called from tipc_net_finalize(),which is always under RTNL except for tipc_net_finalize_work().Let's hold RTNL in tipc_net_finalize_work().[0]:BUG: KASAN: slab-use-after-free in __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162Read of size 1 at addr ffff88805eae1030 by task kworker/0:7/5989CPU: 0 UID: 0 PID: 5989 Comm: kworker/0:7 Not tainted syzkaller #0 PREEMPT_{RT,(full)}Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025Workqueue: events tipc_net_finalize_workCall Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __kasan_check_byte+0x2a/0x40 mm/kasan/common.c:568 kasan_check_byte include/linux/kasan.h:399 [inline] lock_acquire+0x8d/0x360 kernel/locking/lockdep.c:5842 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162 rtlock_slowlock kernel/locking/rtmutex.c:1894 [inline] rwbase_rtmutex_lock_state kernel/locking/spinlock_rt.c:160 [inline] rwbase_write_lock+0xd3/0x7e0 kernel/locking/rwbase_rt.c:244 rt_write_lock+0x76/0x110 kernel/locking/spinlock_rt.c:243 write_lock_bh include/linux/rwlock_rt.h:99 [inline] tipc_mon_reinit_self+0x79/0x430 net/tipc/monitor.c:718 tipc_net_finalize+0x115/0x190 net/tipc/net.c:140 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3319 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3400 kthread+0x70e/0x8a0 kernel/kthread.c:463 ret_from_fork+0x439/0x7d0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Allocated by task 6089: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x1a8/0x320 mm/slub.c:4407 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] tipc_mon_create+0xc3/0x4d0 net/tipc/monitor.c:657 tipc_enable_bearer net/tipc/bearer.c:357 [inline] __tipc_nl_bearer_enable+0xe16/0x13f0 net/tipc/bearer.c:1047 __tipc_nl_compat_doit net/tipc/netlink_compat.c:371 [inline] tipc_nl_compat_doit+0x3bc/0x5f0 net/tipc/netlink_compat.c:393 tipc_nl_compat_handle net/tipc/netlink_compat.c:-1 [inline] tipc_nl_compat_recv+0x83c/0xbe0 net/tipc/netlink_compat.c:1321 genl_family_rcv_msg_doit+0x215/0x300 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x60e/0x790 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x846/0xa10 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:729 ____sys_sendmsg+0x508/0x820 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x1a1/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bridge: fix use-after-free due to MST port state bypasssyzbot reported[1] a use-after-free when deleting an expired fdb. It isdue to a race condition between learning still happening and a port beingdeleted, after all its fdbs have been flushed. The port's state has beentoggled to disabled so no learning should happen at that time, but if wehave MST enabled, it will bypass the port's state, that together with VLANfiltering disabled can lead to fdb learning at a time when it shouldn'thappen while the port is being deleted. VLAN filtering must be disabledbecause we flush the port VLANs when it's being deleted which will stoplearning. This fix adds a check for the port's vlan group which isinitialized to NULL when the port is getting deleted, that avoids the portstate bypass. When MST is enabled there would be a minimal new overheadin the fast-path because the port's vlan group pointer is cache-hot.[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: fix potential use-after-free in have_mon_and_osd_map()The wait loop in __ceph_open_session() can race with the clientreceiving a new monmap or osdmap shortly after the initial map isreceived. Both ceph_monc_handle_map() and handle_one_map() installa new map immediately after freeing the old one kfree(monc->monmap); monc->monmap = monmap; ceph_osdmap_destroy(osdc->osdmap); osdc->osdmap = newmap;under client->monc.mutex and client->osdc.lock respectively, butbecause neither is taken in have_mon_and_osd_map() it's possible forclient->monc.monmap->epoch and client->osdc.osdmap->epoch arms in client->monc.monmap && client->monc.monmap->epoch && client->osdc.osdmap && client->osdc.osdmap->epoch;condition to dereference an already freed map. This happens to bereproducible with generic/395 and generic/397 with KASAN enabled: BUG: KASAN: slab-use-after-free in have_mon_and_osd_map+0x56/0x70 Read of size 4 at addr ffff88811012d810 by task mount.ceph/13305 CPU: 2 UID: 0 PID: 13305 Comm: mount.ceph Not tainted 6.14.0-rc2-build2+ #1266 ... Call Trace: have_mon_and_osd_map+0x56/0x70 ceph_open_session+0x182/0x290 ceph_get_tree+0x333/0x680 vfs_get_tree+0x49/0x180 do_new_mount+0x1a3/0x2d0 path_mount+0x6dd/0x730 do_mount+0x99/0xe0 __do_sys_mount+0x141/0x180 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 13305: ceph_osdmap_alloc+0x16/0x130 ceph_osdc_init+0x27a/0x4c0 ceph_create_client+0x153/0x190 create_fs_client+0x50/0x2a0 ceph_get_tree+0xff/0x680 vfs_get_tree+0x49/0x180 do_new_mount+0x1a3/0x2d0 path_mount+0x6dd/0x730 do_mount+0x99/0xe0 __do_sys_mount+0x141/0x180 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 9475: kfree+0x212/0x290 handle_one_map+0x23c/0x3b0 ceph_osdc_handle_map+0x3c9/0x590 mon_dispatch+0x655/0x6f0 ceph_con_process_message+0xc3/0xe0 ceph_con_v1_try_read+0x614/0x760 ceph_con_workfn+0x2de/0x650 process_one_work+0x486/0x7c0 process_scheduled_works+0x73/0x90 worker_thread+0x1c8/0x2a0 kthread+0x2ec/0x300 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30Rewrite the wait loop to check the above condition directly withclient->monc.mutex and client->osdc.lock taken as appropriate. Whileat it, improve the timeout handling (previously mount_timeout could beexceeded in case wait_event_interruptible_timeout() slept more thanonce) and access client->auth_err under client->monc.mutex to matchhow it's set in finish_auth().monmap_show() and osdmap_show() now take the respective lock beforeaccessing the map as well.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: ets: Always remove class from active list before deleting in ets_qdisc_changezdi-disclosures@trendmicro.com says:The vulnerability is a race condition between `ets_qdisc_dequeue` and`ets_qdisc_change`. It leads to UAF on `struct Qdisc` object.Attacker requires the capability to create new user and network namespacein order to trigger the bug.See my additional commentary at the end of the analysis.Analysis:static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt, struct netlink_ext_ack *extack){... // (1) this lock is preventing .change handler (`ets_qdisc_change`) //to race with .dequeue handler (`ets_qdisc_dequeue`) sch_tree_lock(sch); for (i = nbands; i < oldbands; i++) { if (i >= q->nstrict && q->classes[i].qdisc->q.qlen) list_del_init(&q->classes[i].alist); qdisc_purge_queue(q->classes[i].qdisc); } WRITE_ONCE(q->nbands, nbands); for (i = nstrict; i < q->nstrict; i++) { if (q->classes[i].qdisc->q.qlen) { // (2) the class is added to the q->active list_add_tail(&q->classes[i].alist, &q->active); q->classes[i].deficit = quanta[i]; } } WRITE_ONCE(q->nstrict, nstrict); memcpy(q->prio2band, priomap, sizeof(priomap)); for (i = 0; i < q->nbands; i++) WRITE_ONCE(q->classes[i].quantum, quanta[i]); for (i = oldbands; i < q->nbands; i++) { q->classes[i].qdisc = queues[i]; if (q->classes[i].qdisc != &noop_qdisc) qdisc_hash_add(q->classes[i].qdisc, true); } // (3) the qdisc is unlocked, now dequeue can be called in parallel // to the rest of .change handler sch_tree_unlock(sch); ets_offload_change(sch); for (i = q->nbands; i < oldbands; i++) { // (4) we're reducing the refcount for our class's qdisc and // freeing it qdisc_put(q->classes[i].qdisc); // (5) If we call .dequeue between (4) and (5), we will have // a strong UAF and we can control RIP q->classes[i].qdisc = NULL; WRITE_ONCE(q->classes[i].quantum, 0); q->classes[i].deficit = 0; gnet_stats_basic_sync_init(&q->classes[i].bstats); memset(&q->classes[i].qstats, 0, sizeof(q->classes[i].qstats)); } return 0;}Comment:This happens because some of the classes have their qdiscs assigned toNULL, but remain in the active list. This commit fixes this issue by alwaysremoving the class from the active list before deleting and freeing itsassociated qdiscReproducer Steps(trimmed version of what was sent by zdi-disclosures@trendmicro.com)```DEV="${DEV:-lo}"ROOT_HANDLE="${ROOT_HANDLE:-1:}"BAND2_HANDLE="${BAND2_HANDLE:-20:}" # child under 1:2PING_BYTES="${PING_BYTES:-48}"PING_COUNT="${PING_COUNT:-200000}"PING_DST="${PING_DST:-127.0.0.1}"SLOW_TBF_RATE="${SLOW_TBF_RATE:-8bit}"SLOW_TBF_BURST="${SLOW_TBF_BURST:-100b}"SLOW_TBF_LAT="${SLOW_TBF_LAT:-1s}"cleanup() { tc qdisc del dev "$DEV" root 2>/dev/null}trap cleanup EXITip link set "$DEV" uptc qdisc del dev "$DEV" root 2>/dev/null || truetc qdisc add dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2tc qdisc add dev "$DEV" parent 1:2 handle "$BAND2_HANDLE" \ tbf rate "$SLOW_TBF_RATE" burst "$SLOW_TBF_BURST" latency "$SLOW_TBF_LAT"tc filter add dev "$DEV" parent 1: protocol all prio 1 u32 match u32 0 0 flowid 1:2tc -s qdisc ls dev $DEVping -I "$DEV" -f -c "$PING_COUNT" -s "$PING_BYTES" -W 0.001 "$PING_DST" \ >/dev/null 2>&1 &tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 0tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2tc -s qdisc ls dev $DEVtc qdisc del dev "$DEV" parent ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu: disable SVA when CONFIG_X86 is setPatch series "Fix stale IOTLB entries for kernel address space", v7.This proposes a fix for a security vulnerability related to IOMMU SharedVirtual Addressing (SVA). In an SVA context, an IOMMU can cache kernelpage table entries. When a kernel page table page is freed andreallocated for another purpose, the IOMMU might still hold stale,incorrect entries. This can be exploited to cause a use-after-free orwrite-after-free condition, potentially leading to privilege escalation ordata corruption.This solution introduces a deferred freeing mechanism for kernel pagetable pages, which provides a safe window to notify the IOMMU toinvalidate its caches before the page is reused.This patch (of 8):In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardwareshares and walks the CPU's page tables. The x86 architecture maps thekernel's virtual address space into the upper portion of every process'spage table. Consequently, in an SVA context, the IOMMU hardware can walkand cache kernel page table entries.The Linux kernel currently lacks a notification mechanism for kernel pagetable changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual addressmappings. This can cause the IOMMU's internal caches to retain staleentries for kernel VA.Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise whenkernel page table pages are freed and later reallocated. The IOMMU couldmisinterpret the new data as valid page table entries. The IOMMU mightthen walk into attacker-controlled memory, leading to arbitrary physicalmemory DMA access or privilege escalation. This is also aWrite-After-Free issue, as the IOMMU will potentially continue to writeAccessed and Dirty bits to the freed memory while attempting to walk thestale page tables.Currently, SVA contexts are unprivileged and cannot access kernelmappings. However, the IOMMU will still walk kernel-only page tables allthe way down to the leaf entries, where it realizes the mapping is for thekernel and errors out. This means the IOMMU still caches theseintermediate page table entries, making the described vulnerability a realconcern.Disable SVA on x86 architecture until the IOMMU can receive notificationto flush the paging cache before freeing the CPU kernel page table pages.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/sva: invalidate stale IOTLB entries for kernel address spaceIntroduce a new IOMMU interface to flush IOTLB paging cache entries forthe CPU kernel address space. This interface is invoked from the x86architecture code that manages combined user and kernel page tables,specifically before any kernel page table page is freed and reused.This addresses the main issue with vfree() which is a common occurrenceand can be triggered by unprivileged users. While this resolves theprimary problem, it doesn't address some extremely rare case related tomemory unplug of memory that was present as reserved memory at boot, whichcannot be triggered by unprivileged users. The discussion can be found atthe link below.Enable SVA on x86 architecture since the IOMMU can now receivenotification to flush the paging cache before freeing the CPU kernel pagetable pages.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: libxml2 is vulnerable to multiple stack-based buffer overflows in the xmlcatalog utility when running in --shell mode. The usershell() function processes user input using fixed-size stack buffers without proper bounds checking.By supplying an overly long input line, an attacker can overflow internal buffers (command, arg, and argv) during input parsing. This results in memory corruption within the stack frame.Successful exploitation may cause a crash or potentially allow arbitrary code execution in the context of the xmlcatalog process.This issue has been fixed in the commit c2e233fc.NOTE:The maintainers of this project did not agree that this issue is a vulnerability and considered it a bug.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libxml2-2 < 2.10.3-150500.5.41.1 (version in image is 2.10.3-150500.5.38.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix recvmsg() unconditional requeueIf rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call atthe front of the recvmsg queue already has its mutex locked, it requeuesthe call - whether or not the call is already queued. The call may be onthe queue because MSG_PEEK was also passed and so the call was not dequeuedor because the I/O thread requeued it.The unconditional requeue may then corrupt the recvmsg queue, leading tothings like UAFs or refcount underruns.Fix this by only requeuing the call if it isn't already on the queue - andmoving it to the front if it is already queued. If we don't queue it, wehave to put the ref we obtained by dequeuing it.Also, MSG_PEEK doesn't dequeue the call so shouldn't callrxrpc_notify_socket() for the call if we didn't use up all the data on thequeue, so fix that also.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/freeExynos Virtual Display driver performs memory alloc/free operationswithout lock protection, which easily causes concurrency problem.For example, use-after-free can occur in race scenario like this:``` CPU0 CPU1 CPU2 ---- ---- ---- vidi_connection_ioctl() if (vidi->connection) // true drm_edid = drm_edid_alloc(); // alloc drm_edid ... ctx->raw_edid = drm_edid; ... drm_mode_getconnector() drm_helper_probe_single_connector_modes() vidi_get_modes() if (ctx->raw_edid) // true drm_edid_dup(ctx->raw_edid); if (!drm_edid) // false ... vidi_connection_ioctl() if (vidi->connection) // false drm_edid_free(ctx->raw_edid); // free drm_edid ... drm_edid_alloc(drm_edid->edid) kmemdup(edid); // UAF!! ...```To prevent these vulns, at least in vidi_context, member variables relatedto memory alloc/free should be protected with ctx->lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: release flowtable after rcu grace period on errorCall synchronize_rcu() after unregistering the hooks from error path,since a hook that already refers to this flowtable can be alreadyregistered, exposing this flowtable to packet path and nfnetlink_hookcontrol plane.This error path is rare, it should only happen by reaching the maximumnumber hooks or by failing to set up to hardware offload, just callsynchronize_rcu().There is a check for already used device hooks by different flowtablethat could result in EEXIST at this late stage. The hook parser can beupdated to perform this check earlier to this error path really becomesrarely exercised.Uncovered by KASAN reported as use-after-free from nfnetlink_hook pathwhen dumping hooks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lockbtintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESETand Intel exception-info retrieval) without holdinghci_req_sync_lock(). This lets it race againsthci_dev_do_close() -> btintel_shutdown_combined(), which also runs__hci_cmd_sync() under the same lock. When both paths manipulatehdev->req_status/req_rsp concurrently, the close path may free theresponse skb first, and the still-running hw_error path hits aslab-use-after-free in kfree_skb().Wrap the whole recovery sequence in hci_req_sync_lock/unlock so itis serialized with every other synchronous HCI command issuer.Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: em28xx: fix use-after-free in em28xx_v4l2_open()em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock,creating a race with em28xx_v4l2_init()'s error path andem28xx_v4l2_fini(), both of which free the em28xx_v4l2 structand set dev->v4l2 to NULL under dev->lock.This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL.Fix this by moving the mutex_lock() before the dev->v4l2 read andadding a NULL check for dev->v4l2 under the lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rtnetlink: add missing netlink_ns_capable() check for peer netnsrtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peernetwork namespace when creating paired devices (veth, vxcan,netkit). This allows an unprivileged user with a user namespaceto create interfaces in arbitrary network namespaces, includinginit_net.Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peernamespace before allowing device creation to proceed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: jq is a command-line JSON processor. In 1.8.1 and earlier, the jq bytecode VM's data stack tracks its allocation size in a signed int. When the stack grows beyond ~1 GiB (via deeply nested generator forks), the doubling arithmetic overflows. The wrapped value is passed to realloc and then used for a memmove with attacker-influenced offsets.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: SCO: fix race conditions in sco_sock_connect()sco_sock_connect() checks sk_state and sk_type without holdingthe socket lock. Two concurrent connect() syscalls on the samesocket can both pass the check and enter sco_connect(), leadingto use-after-free.The buggy scenario involves three participants and was confirmedwith additional logging instrumentation: Thread A (connect): HCI disconnect: Thread B (connect): sco_sock_connect(sk) sco_sock_connect(sk) sk_state==BT_OPEN sk_state==BT_OPEN (pass, no lock) (pass, no lock) sco_connect(sk): sco_connect(sk): hci_dev_lock hci_dev_lock hci_connect_sco <- blocked -> hcon1 sco_conn_add->conn1 lock_sock(sk) sco_chan_add: conn1->sk = sk sk->conn = conn1 sk_state=BT_CONNECT release_sock hci_dev_unlock hci_dev_lock sco_conn_del: lock_sock(sk) sco_chan_del: sk->conn=NULL conn1->sk=NULL sk_state= BT_CLOSED SOCK_ZAPPED release_sock hci_dev_unlock (unblocked) hci_connect_sco -> hcon2 sco_conn_add -> conn2 lock_sock(sk) sco_chan_add: sk->conn=conn2 sk_state= BT_CONNECT // zombie sk! release_sock hci_dev_unlockThread B revives a BT_CLOSED + SOCK_ZAPPED socket back toBT_CONNECT. Subsequent cleanup triggers double sock_put() anduse-after-free. Meanwhile conn1 is leaked as it was orphanedwhen sco_conn_del() cleared the association.Fix this by:- Moving lock_sock() before the sk_state/sk_type checks in sco_sock_connect() to serialize concurrent connect attempts- Fixing the sk_type != SOCK_SEQPACKET check to actually return the error instead of just assigning it- Adding a state re-check in sco_connect() after lock_sock() to catch state changes during the window between the locks- Adding sco_pi(sk)->conn check in sco_chan_add() to prevent double-attach of a socket to multiple connections- Adding hci_conn_drop() on sco_chan_add failure to prevent HCI connection leaks
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: algif_aead - Fix minimum RX size check for decryptionThe check for the minimum receive buffer size did not take thetag size into account during decryption. Fix this by adding therequired extra length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86: shadow stacks: proper error handling for mmap lock김영민 reports that shstk_pop_sigframe() doesn't check for errors frommmap_read_lock_killable(), which is a silly oversight, and also showsthat we haven't marked those functions with "__must_check", which wouldhave immediately caught it.So let's fix both issues.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: remove xfs_attr_leaf_hasnameThe calling convention of xfs_attr_leaf_hasname() is problematic, becauseit returns a NULL buffer when xfs_attr3_leaf_read fails, a valid bufferwhen xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and anon-NULL buffer pointer for an already released buffer whenxfs_attr3_leaf_lookup_int fails with other error values.Fix this by simply open coding xfs_attr_leaf_hasname in the callers, sothat the buffer release code is done by each caller ofxfs_attr3_leaf_read.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: fix potential race in tcp_v6_syn_recv_sock()Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()is done too late.After tcp_v4_syn_recv_sock(), the child socket is already visiblefrom TCP ehash table and other cpus might use it.Since newinet->pinet6 is still pointing to the listener ipv6_pinfobad things can happen as syzbot found.Move the problematic code in tcp_v6_mapped_child_init()and call this new helper from tcp_v4_syn_recv_sock() beforethe ehash insertion.This allows the removal of one tcp_sync_mss(), sincetcp_v4_syn_recv_sock() will call it with the correctcontext.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:atm: fore200e: fix use-after-free in tasklets during device removalWhen the PCA-200E or SBA-200E adapter is being detached, the fore200eis deallocated. However, the tx_tasklet or rx_tasklet may still be runningor pending, leading to use-after-free bug when the already freed fore200eis accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().One of the race conditions can occur as follows:CPU 0 (cleanup) | CPU 1 (tasklet)fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | fore200e_tx_tasklet() | fore200e-> // UAFFix this by ensuring tx_tasklet or rx_tasklet is properly canceled beforethe fore200e is released. Add tasklet_kill() in fore200e_shutdown() tosynchronize with any pending or running tasklets. Moreover, sincefore200e_reset() could prevent further interrupts or data transfers,the tasklet_kill() should be placed after fore200e_reset() to preventthe tasklet from being rescheduled in fore200e_interrupt(). Finally,it only needs to do tasklet_kill() when the fore200e state is greaterthan or equal to FORE200E_STATE_IRQ, since tasklets are uninitializedin earlier states. In a word, the tasklet_kill() should be placed inthe FORE200E_STATE_IRQ branch within the switch...case structure.This bug was identified through static analysis.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: Fix locking usage for tcon fieldsWe used to use the cifs_tcp_ses_lock to protect a lot of objectsthat are not just the server, ses or tcon lists. We later introducedsrv_lock, ses_lock and tc_lock to protect fields within thecorresponding structs. This was done to provide a more granularprotection and avoid unnecessary serialization.There were still a couple of uses of cifs_tcp_ses_lock to providetcon fields. In this patch, I've replaced them with tc_lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_ncm: Fix net_device lifecycle with device_moveThe network device outlived its parent gadget device duringdisconnection, resulting in dangling sysfs links and null pointerdereference problems.A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]was reverted due to power management ordering concerns and a NO-CARRIERregression.A subsequent attempt to defer net_device allocation to bind [2] broke1:1 mapping between function instance and network device, making itimpossible for configfs to report the resolved interface name. Thisresults in a regression where the DHCP server fails on pmOS.Use device_move to reparent the net_device between the gadget device and/sys/devices/virtual/ across bind/unbind cycles. This preserves thenetwork interface across USB reconnection, allowing the DHCP server toretain their binding.Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use__free(detach_gadget) macro to undo attachment on bind failure. Thebind_count ensures device_move executes only on the first bind.[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:serial: caif: fix use-after-free in caif_serial ldisc_close()There is a use-after-free bug in caif_serial where handle_tx() mayaccess ser->tty after the tty has been freed.The race condition occurs between ldisc_close() and packet transmission: CPU 0 (close) CPU 1 (xmit) ------------- ------------ ldisc_close() tty_kref_put(ser->tty) [tty may be freed here] <-- race window --> caif_xmit() handle_tx() tty = ser->tty // dangling ptr tty->ops->write() // UAF! schedule_work() ser_release() unregister_netdevice()The root cause is that tty_kref_put() is called in ldisc_close() whilethe network device is still active and can receive packets.Since ser and tty have a 1:1 binding relationship with consistentlifecycles (ser is allocated in ldisc_open and freed in ser_releasevia unregister_netdevice, and each ser binds exactly one tty), we cansafely defer the tty reference release to ser_release() where thenetwork device is unregistered.Fix this by moving tty_kref_put() from ldisc_close() to ser_release(),after unregister_netdevice(). This ensures the tty reference is heldas long as the network device exists, preventing the UAF.Note: We save ser->tty before unregister_netdevice() because ser isembedded in netdev's private data and will be freed along with netdev(needs_free_netdev = true).How to reproduce: Add mdelay(500) at the beginning of ldisc_close()to widen the race window, then run the reproducer program [1].Note: There is a separate deadloop issue in handle_tx() when usingPORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without properserial backend). This deadloop exists even without this patch,and is likely caused by inconsistency between uart_write_room() anduart_write() in serial core. It has been addressed in a separatepatch [2].KASAN report:==================================================================BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929Call Trace: dump_stack_lvl+0x10e/0x1f0 print_report+0xd0/0x630 kasan_report+0xe4/0x120 handle_tx+0x5d1/0x620 dev_hard_start_xmit+0x9d/0x6c0 __dev_queue_xmit+0x6e2/0x4410 packet_xmit+0x243/0x360 packet_sendmsg+0x26cf/0x5500 __sys_sendto+0x4a3/0x520 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0xc9/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f615df2c0d7Allocated by task 9930:Freed by task 64:Last potentially related work creation:The buggy address belongs to the object at ffff8881131e1000 which belongs to the cache kmalloc-cg-2k of size 2048The buggy address is located 1168 bytes inside of freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)The buggy address belongs to the physical page:page_owner tracks the page as allocatedpage last free pid 9778 tgid 9778 stack trace:Memory state around the buggy address: ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb==================================================================[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix bpf_xdp_store_bytes proto for read-only argWhile making some maps in Cilium read-only from the BPF side, we noticedthat the bpf_xdp_store_bytes proto is incorrect. In particular, theverifier was throwing the following error: ; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr), &nat->address, 4, 0); 635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx() 636: (b4) w2 = 26 ; R2=26 637: (b4) w4 = 4 ; R4=4 638: (b4) w5 = 0 ; R5=0 639: (85) call bpf_xdp_store_bytes#190 write into map forbidden, value_size=6 off=0 size=4nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE.The verifier checks the helper's memory access to R3 incheck_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The thirdargument has expected type ARG_PTR_TO_UNINIT_MEM, which includes theMEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3.Given R3 points to a read-only map, the check fails.Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper readingfrom uninitialized memory.This patch simply fixes the expected argument type to match that ofbpf_skb_store_bytes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix tcx/netkit detach permissions when prog fd isn't givenThis commit fixes a security issue where BPF_PROG_DETACH on tcx ornetkit devices could be executed by any user when no program fd wasprovided, bypassing permission checks. The fix adds a capabilitycheck for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: only d_add() negative dentries when they are unhashedCeph can call d_add(dentry, NULL) on a negative dentry that is alreadypresent in the primary dcache hash.In the current VFS that is not safe. d_add() goes through __d_add()to __d_rehash(), which unconditionally reinserts dentry->d_hash intothe hlist_bl bucket. If the dentry is already hashed, reinserting thesame node can corrupt the bucket, including creating a self-loop.Once that happens, __d_lookup() can spin forever in the hlist_bl walk,typically looping only on the d_name.hash mismatch check andeventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7eThis is reachable with reused cached negative dentries. A Ceph lookupor atomic_open can be handed a negative dentry that is already hashed,and fs/ceph/dir.c then hits one of two paths that incorrectly assume"negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL)Both paths can therefore re-add an already-hashed negative dentry.Ceph already uses the correct pattern elsewhere: ceph_fill_trace() onlycalls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn)is true.Fix both fs/ceph/dir.c sites the same way: only call d_add() for anegative dentry when it is actually unhashed. If the negative dentryis already hashed, leave it in place and reuse it as-is.This preserves the existing behavior for unhashed dentries whileavoiding d_hash list corruption for reused hashed negatives.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: aloop: Fix peer runtime UAF during format-change stoploopback_check_format() may stop the capture side when playback startswith parameters that no longer match a running capture stream. Commit826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") movedthe peer lookup under cable->lock, but the actual snd_pcm_stop() stillruns after dropping that lock.A concurrent close can clear the capture entry from cable->streams[] anddetach or free its runtime while the playback trigger path still holds astale peer substream pointer.Keep a per-cable count of in-flight peer stops before droppingcable->lock, and make free_cable() wait for those stops beforedetaching the runtime. This preserves the existing behavior whilemaking the peer runtime lifetime explicit.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet-tcp: fix race between ICReq handling and queue teardownnvmet_tcp_handle_icreq() updates queue->state after sending anInitialization Connection Response (ICResp), but it does so withoutserializing against target-side queue teardown.If an NVMe/TCP host sends an Initialization Connection Request(ICReq) and immediately closes the connection, target-side teardownmay start in softirq context before io_work drains the alreadybuffered ICReq. In that case, nvmet_tcp_schedule_release_queue()sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queuereference under state_lock.If io_work later processes that ICReq, nvmet_tcp_handle_icreq() canstill overwrite the state back to NVMET_TCP_Q_LIVE. That defeats theDISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() andallows a later socket state change to re-enter teardown and issue asecond kref_put() on an already released queue.The ICResp send failure path has the same problem. If teardown hasalready moved the queue to DISCONNECTING, a send error can stilloverwrite the state with NVMET_TCP_Q_FAILED, again reopening thewindow for a second teardown path to drop the queue reference.Fix this by serializing both post-send state transitions withstate_lock and bailing out if teardown has already started.Use -ESHUTDOWN as an internal sentinel for that bail-out path ratherthan propagating it as a transport error like -ECONNRESET. Keepnvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR beforehonoring that sentinel so receive-side parsing stays quiesced until theexisting release path completes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/mana: Validate rx_hash_key_lenSashiko points out that rx_hash_key_len comes from a uAPI structure and isblindly passed to memcpy, allowing the userspace to trash kernelmemory. Bounds check it so the memcpy cannot overflow.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb/client: fix out-of-bounds read in smb2_compound_op()If a server sends a truncated response but a large OutputBufferLength, andterminates the EA list early, check_wsl_eas() returns success withoutvalidating that the entire OutputBufferLength fits within iov_len.Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]);Where size[0] is OutputBufferLength. If iov_len is smaller than size[0],memcpy can read beyond the end of the rsp_iov allocation and leak adjacentkernel heap memory.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:exit: prevent preemption of oopsing TASK_DEAD taskWhen an already-exiting task oopses, make_task_dead() currently callsdo_task_dead() with preemption enabled. That is forbidden:do_task_dead() calls __schedule(), which has a comment saying "WARNING:must be called with preemption disabled!".If an oopsing task is preempted in do_task_dead(), between becomingTASK_DEAD and entering the scheduler explicitly, bad things happen:finish_task_switch() assumes that once the scheduler has switched awayfrom a TASK_DEAD task, the task can never run again and its stack is nolonger needed; but that assumption apparently doesn't hold if the deadtask was preempted (the SM_PREEMPT case).This means that the scheduler ends up repeatedly dropping references onthe dead task's stack, which can lead to use-after-free or double-freeof the entire task stack; in other words, two tasks can end up runningon the same stack, resulting in various kinds of memory corruption.(This does not just affect "recursively oopsing" tasks; it is enough tooops once during task exit, for example in a file_operations::releasehandler)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs()drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensionsusing plain integer division: unsigned int width = mode_cmd->width / (i ? info->hsub : 1); unsigned int height = mode_cmd->height / (i ? info->vsub : 1);However, the ioctl-level framebuffer_check() in drm_framebuffer.c usesdrm_format_info_plane_width/height() which round up dimensions viaDIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM objectsize check for certain pixel format and dimension combinations.For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer theGEM size validation path sees height=0 instead of height=1. Theexpression (height - 1) then wraps to UINT_MAX as an unsigned int,causing min_size to overflow and wrap back to a small value. A tinyGEM object therefore passes the size guard, yet when the GPU accessesthe chroma plane it will read or write memory beyond the object'sbounds.Fix by replacing the open-coded divisions with drm_format_info_plane_width()and drm_format_info_plane_height(), which use DIV_ROUND_UP() and matchthe calculation already used in framebuffer_check().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALLThe SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs withlist_for_each_entry_safe(), which caches the next entry in @tmp beforethe loop body runs. The body calls sctp_sendmsg_to_asoc(), which maydrop the socket lock inside sctp_wait_for_sndbuf().While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF theassociation cached in @tmp, migrating it to a new endpoint viasctp_sock_migrate() (list_del_init() + list_add_tail() tonewep->asocs), and optionally close the new socket which frees theassociation via kfree_rcu(). The cached @tmp can also be freed by anetwork ABORT for that association, processed in softirq while thelock is dropped.sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lockvia the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothingrevalidates @tmp. After a successful return, the iterator advances tothe stale @tmp, yielding either a use-after-free (if the peeled socketwas closed) or a list-walk onto the new endpoint's list head (typeconfusion of &newep->asocs as a struct sctp_association *).Both are reachable from CapEff=0; the type-confusion path givescontrolled indirect call via the outqueue.sched->init_sid pointer.Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc()returns. @asoc is known to still be on ep->asocs at that point: theonly callers that list_del an association from ep->asocs aresctp_association_free() (which sets asoc->base.dead) andsctp_assoc_migrate() (which changes asoc->base.sk), andsctp_wait_for_sndbuf() checks both under the lock before anysuccessful return; a tripped check propagates as err < 0 and the loopbails before the re-derive.The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and theloop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, sothe @tmp cached by list_for_each_entry_safe() still covers thelock-held free that ba59fb027307 ("sctp: walk the list of asocsafely") was added for.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMPYizhou Zhao reported that simply having one RAW socket on protocolIPPROTO_RAW (255) was dangerous. socket(AF_INET, SOCK_RAW, 255);A malicious incoming ICMP packet can set the protocol field to 255and match this socket, leading to FNHE cache changes.inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner"man 7 raw" states: A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able to send any IP protocol that is specified in the passed header. Receiving of all IP protocols via IPPROTO_RAW is not possible using raw sockets.Make sure we drop these malicious packets.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io-wq: check that the predecessor is hashed in io_wq_remove_pending()io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelledwork was the tail of its hash bucket. When doing this, it checks whetherthe preceding entry in acct->work_list has the same hash value, butnever checks that the predecessor is hashed at all. io_get_work_hash()is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hashbits are never set for non-hashed work, so it returns 0. Thus, when ahashed bucket-0 work is cancelled while a non-hashed work is its listpredecessor, the check spuriously passes and a pointer to the non-hashedio_kiocb is stored in wq->hash_tail[0].Because non-hashed work is dequeued via the fast path inio_get_next_work(), which never touches hash_tail[], the stale pointeris never cleared. Therefore, after the non-hashed io_kiocb completes andis freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. Theio_wq is per-task (tctx->io_wq) and survives ring open/close, so thedangling pointer persists for the lifetime of the task; the next hashedbucket-0 enqueue dereferences it in io_wq_insert_work() andwq_list_add_after() writes through freed memory.Add the missing io_wq_is_hashed() check so a non-hashed predecessornever inherits a hash_tail[] slot.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: act_ct: Only release RCU read lock after ct_ftWhen looking up a flow table in act_ct in tcf_ct_flow_table_get(),rhashtable_lookup_fast() internally opens and closes an RCU read criticalsection before returning ct_ft.The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero()is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ftobject. This vulnerability can lead to privilege escalation.Analysis from zdi-disclosures@trendmicro.com:When initializing act_ct, tcf_ct_init() is called, which internally triggerstcf_ct_flow_table_get().static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params){ struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table *ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ...}static __always_inline void *rhashtable_lookup_fast( struct rhashtable *ht, const void *key, const struct rhashtable_params params){ void *obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj;}At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ftfrom zones_ht . The lookup is performed within an RCU read critical sectionthrough rcu_read_lock() / rcu_read_unlock(), which prevents the object frombeing freed. However, at the point of function return, rcu_read_unlock() hasalready been called, and there is nothing preventing ct_ft from being freedbefore reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomesthe race window, during which ct_ft can be freed.Free Process:tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu()tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put().static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft){ if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); }}At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU workstatic void tcf_ct_flow_table_cleanup_work(struct work_struct *work){ struct tcf_ct_flow_table *ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE);}tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executesbetween [1] and [2], UAF occurs.This race condition has a very short race window, making it generallydifficult to trigger. Therefore, to trigger the vulnerability an msleep(100) wasinserted after[1]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: use list_del_rcu for netlink hooksnft_netdev_unregister_hooks and __nft_unregister_flowtable_net_hooks needto use list_del_rcu(), this list can be walked by concurrent dumpers.Add a new helper and use it consistently.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Revert "net/smc: Introduce TCP ULP support"This reverts commit d7cd421da9da2cc7b4d25b8537f66db5c8331c40.As reported by Al Viro, the TCP ULP support for SMC is fundamentallybroken. The implementation attempts to convert an active TCP socketinto an SMC socket by modifying the underlying `struct file`, dentry,and inode in-place, which violates core VFS invariants that assumethese structures are immutable for an open file, creating a risk ofuse after free errors and general system instability.Given the severity of this design flaw and the fact that cleaneralternatives (e.g., LD_PRELOAD, BPF) exist for legacy applicationtransparency, the correct course of action is to remove this featureentirely.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: containerd is an open-source container runtime. In versions prior to 1.7.32, 2.0.9, 2.2.4 and 2.3.1, containers launched with a numeric User directive that cannot be parsed as a 32-bit integer are incorrectly treated as a username, leading to runAsNonRoot evasion. If a crafted image provides an /etc/passwd file mapping this large numeric string to root, the container ultimately runs as root (UID 0). This allows the Kubernetes runAsNonRoot restriction to be bypassed, causing unexpected behavior for environments that require containers to run as a non-root user. This issue has been fixed in versions 1.7.32, 2.0.9, 2.2.4 and 2.3.1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: purge outqueue on stale COOKIE-ECHO handlingsctp_stream_update() is only invoked when the association is moved intoCOOKIE_WAIT during association setup/reconfiguration. In this path, theoutbound stream scheduler state (stream->out_curr) is expected to beclean, since no user data should have been transmitted yet unless thestate machine has already partially progressed.However, a corner case exists in sctp_sf_do_5_2_6_stale(): when aStale Cookie ERROR is received, the association is rolled back fromCOOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may alreadyhave been queued and even bundled with the COOKIE-ECHO chunk.During the rollback, sctp_stream_update() frees the old stream tableand installs a new one, but it does not invalidate stream->out_curr.As a result, out_curr may still point to a freed sctp_stream_outentry from the previous stream state.Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely onstream->out_curr->ext, which can lead to use-after-free once the oldstream state has been released via sctp_stream_free().This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10Fix this by fully purging the association outqueue when handling theStale Cookie case. This ensures all pending transmit and retransmitstate is dropped, and any scheduler cached pointers are invalidated,making it safe to rebuild stream state during COOKIE_WAIT restart.Updating only stream->out_curr would be insufficient, since queuedand retransmittable data would still reference the old stream state andtrigger later use-after-free in dequeue paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: skbuff: fix missing zerocopy reference in pskb_carve helperspskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copythe old skb_shared_info header into a new buffer via memcpy(), whichincludes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.Neither function calls net_zcopy_get() for the new shinfo, creating anunaccounted holder: every skb_shared_info with destructor_arg set willcall skb_zcopy_clear() once when freed, but the correspondingnet_zcopy_get() was never called for the new copy. Repeated callsdrive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc whileTX skbs still hold live destructor_arg pointers.KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530The skb consuming the late access still referenced the same uarg viashinfo->destructor_arg copied by pskb_carve_inside_nonlinear() withouta refcount bump. This has been verified to be reliably exploitable: aworking proof-of-concept achieves full root privilege escalation froman unprivileged local user on a default kernel configuration.The fix follows the pattern of pskb_expand_head() which has the samememcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()is placed after skb_orphan_frags() succeeds, so the orphan error pathneeds no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() isplaced after all failure points and just before skb_release_data(), sono error path needs cleanup at all -- matching pskb_expand_head() moreclosely and avoiding the need for a balancing net_zcopy_put().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:quota: Fix race of dquot_scan_active() with quota deactivationdquot_scan_active() can race with quota deactivation inquota_release_workfn() like: CPU0 (quota_release_workfn) CPU1 (dquot_scan_active) ============================== ============================== spin_lock(&dq_list_lock); list_replace_init( &releasing_dquots, &rls_head); /* dquot X on rls_head, dq_count == 0, DQ_ACTIVE_B still set */ spin_unlock(&dq_list_lock); synchronize_srcu(&dquot_srcu); spin_lock(&dq_list_lock); list_for_each_entry(dquot, &inuse_list, dq_inuse) { /* finds dquot X */ dquot_active(X) -> true atomic_inc(&X->dq_count); } spin_unlock(&dq_list_lock); spin_lock(&dq_list_lock); dquot = list_first_entry(&rls_head); WARN_ON_ONCE(atomic_read(&dquot->dq_count));The problem is not only a cosmetic one as under memory pressure thecaller of dquot_scan_active() can end up working on freed dquot.Fix the problem by making sure the dquot is removed from releasing listwhen we acquire a reference to it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/amd: Fix clone_alias() to use the original device's devidCurrently clone_alias() assumes first argument (pdev) is always theoriginal device pointer. This function is called bypci_for_each_dma_alias() which based on topology decides to sendoriginal or alias device details in first argument.This meant that the source devid used to look up and copy the DTEmay be incorrect, leading to wrong or stale DTE entries beingpropagated to alias device.Fix this by passing the original pdev as the opaque data argument toboth the direct clone_alias() call and pci_for_each_dma_alias(). Insideclone_alias(), retrieve the original device from data and compute devidfrom it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: fix mm lifecycle in open-coded task_vma iteratorThe open-coded task_vma iterator reads task->mm locklessly and acquiresmmap_read_trylock() but never calls mmget(). If the task exitsconcurrently, the mm_struct can be freed as it is notSLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.Safely read task->mm with a trylock on alloc_lock and acquire an mmreference. Drop the reference via bpf_iter_mmput_async() in _destroy()and error paths. bpf_iter_mmput_async() is a local wrapper aroundmmput_async() with a fallback to mmput() on !CONFIG_MMU.Reject irqs-disabled contexts (including NMI) up front. Operations usedby _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)take spinlocks with IRQs disabled (pool->lock, pi_lock). Running fromNMI or from a tracepoint that fires with those locks held coulddeadlock.A trylock on alloc_lock is used instead of the blocking task_lock()(get_task_mm) to avoid a deadlock when a softirq BPF program iteratesa task that already holds its alloc_lock on the same CPU.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/bpf: Zero-extend bpf prog return values and kfunc argumentss390x ABI requires callers to zero-extend unsigned arguments andsign-extend signed arguments, and callees to zero-extend unsignedreturn values and sign-extend signed return values.s390 BPF JIT currently implements only sign extension. Fix thisomission and implement zero extension too.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: validate embedded INIT chunk and address list lengths in cookiesctp_unpack_cookie() only checked that the embedded INIT chunk lengthdid not exceed the remaining cookie payload, but did not ensure that theINIT chunk is large enough to contain a complete INIT header.A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whoselength field is smaller than sizeof(struct sctp_init_chunk). Later,sctp_process_init() accesses INIT parameters unconditionally, which maylead to out-of-bounds reads.In addition, raw_addr_list_len is not fully validated against theremaining cookie payload. When cookie authentication is disabled, anattacker can supply an oversized raw_addr_list_len and causesctp_raw_to_bind_addrs() to read beyond the end of the cookie. Theaddress parser also lacks sufficient bounds checks for parameter headersand lengths, allowing malformed address parameters to triggerout-of-bounds reads.Fix this by:- requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk);- validating that the INIT chunk and raw address list together fit within the cookie payload;- verifying sufficient data exists for each address parameter header and payload before parsing it.Note that sctp_verify_init() must be called after sctp_unpack_cookie()and before sctp_process_init() when cookie authentication is disabled.This will be addressed in a separate patch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()The TX metadata area resides in the UMEM buffer which is memory-mappedand concurrently writable by userspace. In xsk_skb_metadata(),csum_start and csum_offset are read from shared memory for boundsvalidation, then read again for skb assignment. A malicious userspaceapplication can race to overwrite these values between the two reads,bypassing the bounds check and causing out-of-bounds memory accessduring checksum computation in the transmit path.Fix this by reading csum_start and csum_offset into local variablesonce, then using the local copies for both validation and assignment.Note that other metadata fields (flags, launch_time) and the cachedcsum fields may be mutually inconsistent due to concurrent userspacewrites, but this is benign: the only security-critical invariant isthat each field's validated value is the same one used, which localcaching guarantees.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl()pppol2tp_ioctl() read sock->sk->sk_user_data directly without anylocks or reference counting. If a controllable sleep was induced duringcopy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrentsocket close could trigger pppol2tp_session_close() asynchronously. Thisfrees the l2tp_session structure via the l2tp_session_del_work workqueue.Upon resuming, the ioctl thread dereferences the stale session pointer,resulting in a Use-After-Free (UAF).Fix this by securely fetching the session reference using the RCU-safe,refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks thesession's refcount across the sleep. We structured the function to exitvia standard err breaks, guaranteeing that l2tp_session_put() is cleanlycalled on all return paths to drop the reference.To preserve existing behavior we validate the session and its magicsignature only for the specific L2TP commands that require it. Thisensures that generic/unknown ioctls called on an unconnected socketstill return -ENOIOCTLCMD and correctly fall back to generic handlers(e.g. in sock_do_ioctl()).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()bt_accept_dequeue() unlinks a not-yet-accepted child from the parentaccept queue and release_sock()s it before returning, so the returnedsk has no caller reference and is unlocked.l2cap_sock_cleanup_listen() walks these children on listening-socketclose. A concurrent HCI disconnect drives hci_rx_work ->l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() andfrees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_killThis is distinct from the two fixes already in this area: commite83f5e24da741 ("Bluetooth: serialize accept_q access") serialises theaccept_q list/poll and takes temporary refs inside bt_accept_dequeue(),and CVE-2025-39860 serialises the userspace close()/accept() race bycalling cleanup_listen() under lock_sock() in l2cap_sock_release().Neither covers l2cap_conn_del() running from hci_rx_work, so this UAFstill reproduces on current bluetooth/master.Take the reference at the source: bt_accept_dequeue() does sock_hold()while sk is still locked, before release_sock(); callers sock_put().cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() undera brief child sk lock (serialising vs l2cap_sock_teardown_cb()), dropsit before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() onSOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs underthe parent sk lock and that would invertconn->lock -> chan->lock -> sk_lock (lockdep).KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced12 use-after-free reports per run before this change; 0, and no lockdepreport, over 1600+ raced iterations after it on bluetooth/master.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, XInclude substitution performed by Nokogiri::XML::Node#do_xinclude replaced each in place, freeing the include node along with its children (such as and its descendants) and any namespaces declared on them. If an application had already exposed one of those nodes or namespaces to Ruby, the corresponding Ruby object was left pointing at freed memory. Using the object could result in invalid reads or writes to memory. This vulnerability is fixed in 1.19.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- ruby2.5-rubygem-nokogiri > 0-0 (version in image is 1.8.5-150400.14.6.1).
Description: Vim is an open source, command line text editor. From 9.1.1784 until 9.2.0678, when the bundled zip plugin autoload/zip.vim falls back to PowerShell to browse, read, extract, update or delete entries in a zip archive, it builds the PowerShell command by inserting archive entry names that are quoted only for the shell, not for PowerShell. A crafted entry name can break out of the intended string context and cause PowerShell to execute arbitrary commands with the privileges of the user running Vim, triggered by opening, viewing or extracting the archive. This vulnerability is fixed in 9.2.0678.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT pathIn sev_dbg_crypt(), the per-iteration transfer length is bounded bythe source page offset (PAGE_SIZE - s_off) but not by the destinationpage offset (PAGE_SIZE - d_off). When d_off > s_off, the encryptpath (__sev_dbg_encrypt_user) performs a read-modify-write using asingle-page intermediate buffer (dst_tpage): 1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16) before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE, the PSP writes beyond the end of the 4096-byte dst_tpage allocation. 2. The subsequent memcpy()/copy_from_user() into page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows by up to 15 bytes under the same condition.Trigger example: s_off = 0, d_off = 1, debug.len = PAGE_SIZE -the PSP is instructed to write round_up(4097, 16) = 4112 bytes toa 4096-byte buffer.Fix by also bounding len by (PAGE_SIZE - d_off), the same check thatsev_send_update_data() already performs for its single-page guestregion. ================================================================== BUG: KASAN: slab-use-after-free in sev_dbg_crypt+0x993/0xd10 [kvm_amd] Write of size 4095 at addr ff110062293bb009 by task sev_dbg_test/228214 CPU: 96 UID: 0 PID: 228214 Comm: sev_dbg_test Tainted: G U W 7.0.0-smp--5ce9b0c48211-dbg #156 PREEMPTLAZY Tainted: [U]=USER, [W]=WARN Hardware name: Google Astoria/astoria, BIOS 0.20250817.1-0 08/25/2025 Call Trace: dump_stack_lvl+0x54/0x70 print_report+0xbc/0x260 kasan_report+0xa2/0xd0 kasan_check_range+0x25f/0x2c0 __asan_memcpy+0x40/0x70 sev_dbg_crypt+0x993/0xd10 [kvm_amd] sev_mem_enc_ioctl+0x33c/0x450 [kvm_amd] kvm_vm_ioctl+0x65d/0x6d0 [kvm] __se_sys_ioctl+0xb2/0x100 do_syscall_64+0xe8/0x870 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7fe72b6a0 pfn:0x62293bb memcg:ff11000112827d82 flags: 0x1400000000000000(node=1|zone=1) raw: 1400000000000000 0000000000000000 dead000000000122 0000000000000000 raw: 00000007fe72b6a0 0000000000000000 00000001ffffffff ff11000112827d82 page dumped because: kasan: bad access detected Memory state around the buggy address: ff110062293bbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff110062293bbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ff110062293bc000: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ff110062293bc080: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ff110062293bc100: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint[sean: add sample KASAN splat, Fixes, and stable@]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-cgroup: fix UAF in __blkcg_rstat_flush()When multiple blkgs in the same blkcg are released concurrently,a use-after-free can occur. The race happens when one blkg's__blkcg_rstat_flush() removes another blkg's iostat entries viallist_del_all(). The second blkg sees an empty list and proceedsto free itself while the first is still iterating over its entries.Move the flush from __blkg_release() (RCU callback) to blkg_release()(before call_rcu). This ensures the RCU grace period waits for anyconcurrent flush's rcu_read_lock() section to complete before freeing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix amdgpu_hmm_range_get_pagesThe notifier sequence must only be read once or otherwise we could workwith invalid pages.While at it also fix the coding style, e.g. drop the pre-initializedreturn value and use the common define for 2G range.(cherry picked from commit c08972f555945cda57b0adb72272a37910153390)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: fix a vulnerability of integer overflow in kfd debuggerget_queue_ids() computes array_size = num_queues * sizeof(uint32_t),which could overflow on 32-bit size_t build. using array_size()instead, it saturates to SIZE_MAX on overflow.(cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/i915: Fix potential UAF in TTM object purgeTLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer.A user reported hitting the following bug under heavy use on DG2:[26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI[26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy)[26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025[26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915][26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78[26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282[26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000[26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff[26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000[26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0[26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0[26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000[26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0[26620.095612] PKRU: 55555554[26620.095612] Call Trace:[26620.095615] [26620.095615] i915_ttm_move+0x2b9/0x420 [i915][26620.095642] ? ttm_tt_init+0x65/0x80 [ttm][26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915][26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm][26620.095669] ttm_bo_evict+0x100/0x150 [ttm][26620.095671] ? preempt_count_add+0x64/0xa0[26620.095673] ? _raw_spin_lock+0xe/0x30[26620.095675] ? _raw_spin_unlock+0xd/0x30[26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915][26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm][26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm][26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm][26620.095709] ? init_object+0x62/0xd0[26620.095712] ttm_bo_validate+0x7a/0x180 [ttm][26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30[26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915][26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915][26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915][26620.095786] ? alloc_debug_processing+0xd0/0x100[26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30[26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915][26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915][26620.095848] i915_vma_pin_ww+0x706/0x980 [i915][26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915][26620.095904] eb_validate_vmas+0x170/0xa00 [i915][26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915][26620.095953] ? alloc_debug_processing+0xd0/0x100[26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30[26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915][26620.095977] ? __wake_up_sync_key+0x32/0x50[26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915][26620.096001] ? __slab_alloc.isra.0+0x67/0xc0[26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915]Results from decode_stacktrace.sh pointed to dereference of a file pointerfield of a i915 TTM page vector container associated with an object beingpurged on eviction. That path is taken when the object is marked as nolonger needed.Code analysis revealed a possibility of the i915 TTM page vector containerbeing replaced with a new instance inside a function that purges contentof the object, should it be still busy. That function is called,indirectly via a more general function that changes the object's placementand caching policy,---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: esp: restore combined single-frag length gateThe ESP out-of-place fast path appends the trailer in esp_output_head()before esp_output_tail() allocates the destination page frag. Thehead-side gate currently checks skb->data_len and tailen separately, butthe tail code allocates a single destination frag from the combinedpost-trailer skb->data_len.Reject the page-frag fast path when the combined aligned length exceeds apage. Otherwise skb_page_frag_refill() may fall back to a single page whilethe destination sg still spans the combined skb->data_len.Restore this combined-length page gate for both IPv4 and IPv6.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifnameA reader in l2tp_session_get_by_ifname() can return a pointer to asession whose refcount has reached zero. The getter takes itsreference with plain refcount_inc(), but every other session getterin the same file (l2tp_v2_session_get, l2tp_v3_session_get, and thecorresponding _get_next variants) uses refcount_inc_not_zero()because the IDR/RCU lookup can race with refcount_dec_and_test() ->l2tp_session_free() -> kfree_rcu(). The ifname getter is the onlyoutlier; the inconsistency was raised on-list after 979c017803c4("l2tp: use list_del_rcu in l2tp_session_unhash").A reader inside rcu_read_lock_bh() that matches session->ifname canbe preempted between the strcmp() and the refcount_inc(). If thelast reference drops on another CPU in that window, the reader'srefcount_inc() runs on a counter that has reached zero. refcount_tcatches the addition-on-zero, prints "refcount_t: addition on 0;use-after-free", saturates the counter, and returns the saturatedpointer to the caller. Session memory is held live by the in-flightRCU read section, but the kfree_rcu() callback queued froml2tp_session_free() will free it once the grace period closes; acaller that dereferences the returned session past that point hitsa slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPUsleeping lock and the preemption window is real; on stock PREEMPTkernels local_bh_disable() is a preempt_count increment that closesthe cross-CPU race in practice (see below).Use refcount_inc_not_zero() and continue the list walk on failure,matching the other session getters in the file. The ifname getteris the only session getter in net/l2tp/ that still uses the barerefcount_inc() pattern; this change restores file-internalconsistency. The success path is unchanged.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: fix race between sctp_wait_for_connect and peeloffsctp_wait_for_connect() drops and re-acquires the socket lock whilewaiting for the association to reach ESTABLISHED state. During thiswindow, another thread can peeloff the association to a new socket viagetsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. Afterre-acquiring the old socket lock, sctp_wait_for_connect() returnssuccess without noticing the migration - the caller then accessesthe association under the wrong lock in sctp_datamsg_from_user().Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()already has, returning an error if the association was migrated whilewe slept.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/handshake: Drain pending requests at net namespace exitThe arguments to list_splice_init() in handshake_net_exit() arereversed. The call moves the local empty "requests" list ontohn->hn_requests, leaving the local list empty, so the subsequentdrain loop runs zero iterations. Pending handshake requests thathad not yet been accepted are not torn down when the net namespaceis destroyed; each one keeps a reference on a socket file and onthe handshake_req allocation.Pass the source and destination in the documented order(list_splice_init(list, head) moves list onto head) so the pendinglist is transferred to the local scratch list and drained throughhandshake_complete().Fixing the splice direction exposes a list-corruption race. Afterthe splice each req->hr_list still has non-empty link pointers,threading the stack-local scratch list rather than hn_requests.A concurrent handshake_req_cancel() -- for example, from sunrpc'sTLS timeout on a kernel socket whose netns reference was nottaken -- finds the request through the rhashtable, callsremove_pending(), and sees !list_empty(&req->hr_list).__remove_pending_locked() then list_del_init()s an entry off thescratch list while the drain iterates, corrupting it. The samecall arriving after the drain loop has run list_del() on anentry hits LIST_POISON instead.Have remove_pending() check HANDSHAKE_F_NET_DRAINING underhn_lock and report not-found when drain is in progress. Thedrain has already taken ownership; handshake_complete()'s existingtest_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitratesbetween drain and cancel for who calls the consumer's hp_done. Uselist_del_init() rather than list_del() in the drain so req->hr_listdoes not carry LIST_POISON after drain releases the entry.The DRAINING guard in remove_pending() makes cancel return false,but cancel still falls through to test_and_set_bit onHANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.Without another pin, if that is the last reference, sk_destruct freesthe request while it is still linked on the drain loop's local list.Pin each request's hr_file under hn_lock before releasing the list,and drop that drain pin after the loop finishes with the request.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/handshake: hand off the pinned file reference to accept_doithandshake_req_next() removes the request from the per-netpending list and drops hn_lock before handshake_nl_accept_doit()reads req->hr_sk->sk_socket and dereferences sock->file (once inFD_PREPARE() and again in get_file()). In that window aconsumer running tls_handshake_cancel() followed by sockfd_put()(svc_sock_free) or __fput_sync() (xs_reset_transport) releasessock->file. sock_release() then runs sock_orphan(), zeroingsk_socket, and frees the struct socket. The accept-side codeeither reads NULL through sk_socket or chases freed memory.The submit-side sock_hold() does not prevent this. sk_refcntprotects struct sock, but struct socket and sock->file areindependently refcounted via the file descriptor the consumerowns. Pinning sk leaves sock and sock->file unprotected.Retarget the accept-side dereferences at req->hr_file, which waspinned at submit time, instead of req->hr_sk->sk_socket->file.Pinning on its own is not sufficient: a consumer that cancelsbetween handshake_req_next() returning and accept_doit reachingFD_PREPARE() takes the !remove_pending() branch inhandshake_req_cancel() and drops hr_file before the accept sidetakes its own reference. Hand off an additional file referenceinside handshake_req_next(), under hn_lock, so the accept sideoperates on a reference that no concurrent handshake_req_cancel()can revoke. FD_PREPARE() consumes that handed-off reference,either by transferring it to the new fd in fd_publish() or bydropping it in the cleanup destructor on error; the explicitget_file() that previously balanced FD_PREPARE() is thereforeredundant and goes away.Update handshake_req_cancel_test2 and _test3 to simulate theFD_PREPARE() consumption with an fput() so the kunit file-countassertions stay balanced.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress()ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);hdrlen is __u8. For n >= 127 the result exceeds 255 and silentlytruncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8The caller in ipv6_rpl_srh_rcv() then places the compressed headerat buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,but the decompressed region occupies buf[0..2055] (8-byte headerplus 128 full addresses). The compressed header overlaps thedecompressed data, and ipv6_rpl_srh_compress() writes into thisoverlap, corrupting the routing header of the forwarded packet.The existing guard at exthdrs.c:546 checks (n + 1) > 255, whichprevents n+1 from overflowing unsigned char (the segments_leftfield), but does not prevent the computed hdrlen from overflowing__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does notfit.Tighten the bound to (n + 1) > 127. This caps n at 126, givinghdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressedheader then lands at buf + ((254 + 1) << 3) = buf + 2040, exactlypast the decompressed region (buf[0..2039]). No overlap. 127segments is well beyond any realistic RPL deployment.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tunnels: do not assume transport header in iptunnel_pmtud_check_icmp()In some cases, iptunnel_pmtud_check_icmp() can be called whileskb transport header is not set.This triggers an out-of-bound access, because(typeof(skb->transport_header))~0U is 65535.Access the icmp header based on IPv4 network header,after making sure icmp->type is present in skb linear part.Note that iptunnel_pmtud_check_icmpv6()) is fine.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()Sashiko found that iptunnel_pmtud_build_icmp() andiptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()before an skb_cow() call which can reallocate skb->head.Fix this possible UAF by initializing the local variablesafter the skb_cow() call.Remove skb_reset_network_header() calls which were not needed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_portstoo soon.Only after unregister_net_sysctl_table() we can be sure no threads can possiblyuse the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:security/keys: fix missed RCU read section on lookupNicholas Carlini reports that the keyring code calls assoc_array_find()in find_key_to_update() without holding the RCU read lock, while theassoc_array_gc() code really is designed around removing the node fromthe tree and then freeing it after an RCU grace-period.The regular key handling doesn't see this because holding the keyringsemaphore hides any lifetime issues, but the persistent key handlinguses a different model.Instead of extending the keyring locking, just do the simple RCU lockingthat the assoc_array was designed for.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-mq: pop cached request if it is usableWhen submitting a bio to blk-mq, if the task should sleep after peekinga cached request, but before it pops it, the plug flushes and callsblk_mq_free_plug_rqs, freeing the cached_rqs. This creates ause-after-free bug. Fix this by popping the cached request before anypossible blocking calls if it is suitable for use.Popping this request first holds a queue reference, so avoid anyserialization races with queue freezes and can safely proceed withdispatching that request to the driver. This potentially increases atiming window from when a driver wants to freeze its queue to whenrequests stop being dispatched. That scenario is off the fast paththough, and drivers need to appropriately handle requests during afreeze request anyway.The downside is the popped element needs to be individually freed whenwe performed a bio plug merge. The cached request would have had to befreed later anyway, but this patch does it inline with building the pluglist instead of after flushing it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: seq: Serialize UMP output teardown with event_inputseq_ump_process_event() borrows client->out_rfile.output withoutsynchronizing with the first-open and last-close transition inseq_ump_client_open() and seq_ump_client_close().The last output unuse can therefore drop opened[STR_OUT] to zero andrelease the rawmidi file while an in-flight event_input callback is stillinside snd_rawmidi_kernel_write(). That leaves the rawmidi substreamruntime exposed to teardown before the write path has taken its ownbuffer reference.Add a per-client rwlock for the event_input-visible output file. Publisha newly opened output file under the write side, and hold the read sidefrom the output lookup through snd_rawmidi_kernel_write(). The lastoutput close copies and clears the visible output file under the writeside, then drops the lock and releases the saved rawmidi file. UseIRQ-safe rwlock guards because event_input can also be reached fromatomic sequencer delivery.The buggy scenario involves two paths, with each column showing theorder within that path:path A label: event_input path path B label: last unuse path1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero.2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file.3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime.This keeps the output substream and runtime alive for the fullevent_input write while keeping rawmidi release outside the rwlock.KASAN reproduced this as a slab-use-after-free insnd_rawmidi_kernel_write1(), with allocation throughseq_ump_use()/snd_seq_port_connect() and free throughseq_ump_unuse()/snd_seq_port_disconnect().Validation reproduced this kernel report:KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400RIP: 0033:0x7f5528af837fRead of size 8Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/virtio: use uninterruptible resv lock for plane updatesvirtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lockthe framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() andignore its return value. The function can fail with -EINTR fromdma_resv_lock_interruptible() (signal during lock wait) or with-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),leaving the resv lock not held. The queue path then walks the objectarray and calls dma_resv_add_fence(), which requires the lock held;with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctlBeyond the WARN, mutating the dma_resv fence list without the lockraces with concurrent readers/writers and can corrupt the list.Both call sites run inside the .atomic_update plane callback, whichDRM atomic helpers do not allow to fail (by the time it runs, thecommit has been signed off to userspace and there is no cleanrollback path). Moving the lock acquisition to .prepare_fb wasrejected because the broader lock scope deadlocks against other BOlocking paths in the same atomic commit.Introduce virtio_gpu_lock_one_resv_uninterruptible() that usesdma_resv_lock() instead of dma_resv_lock_interruptible(). Thiseliminates the -EINTR failure mode -- the realistic syzbot trigger-- without extending the lock hold across the commit. The helperlocks a single BO and rejects nents > 1 with -EINVAL; both fixsites lock exactly one BO.Use it from virtio_gpu_cursor_plane_update() andvirtio_gpu_resource_flush(); check the return value to handle theremaining -ENOMEM case from dma_resv_reserve_fences() by freeingthe objs and skipping the plane update for that frame. Theframebuffer BOs touched here are not shared with other contextsand lock contention is expected to be brief, so the loss ofsignal-interruptibility is acceptable.Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)continue to use the interruptible variant.The bug was reported by syzbot, triggered via fault injection(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the-ENOMEM branch in dma_resv_reserve_fences().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:af_unix: Fix UAF read of tail->len in unix_stream_data_wait()unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) withoutholding any lock that prevents SKBs on that queue from being dequeued andfreed.This has been the case since commit 79f632c71bea ("unix/stream: fixpeeking with an offset larger than data in queue").The first consequence of this is that the pointer comparison`tail != last` can be false even if `last` semantically refers to analready-freed SKB while `tail` is a new SKB allocated at the same address;which can cause unix_stream_data_wait() to wrongly keep blocking after newdata has arrived, but only in a weird scenario where a peeking recv() anda normal recv() on the same socket are racing, which is probably not areal problem.But since commit 2b514574f7e8 ("net: af_unix: implement splice for streamaf_unix sockets"), `tail` is actually dereferenced, which can cause UAF inthe following race scenario (where test_setup() runs single-threaded,and afterwards, test_thread1() and test_thread2() run concurrently intwo threads:```static int socks[2];void test_setup(void) { socketpair(AF_UNIX, SOCK_STREAM, 0, socks); send(socks[1], "A", 1, 0); int peekoff = 1; setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));}void test_thread1(void) { char dummy; recv(socks[0], &dummy, 1, MSG_PEEK);}void test_thread2(void) { char dummy; recv(socks[0], &dummy, 1, 0); shutdown(socks[1], SHUT_WR);}```when racing like this:```thread1 thread2unix_stream_read_generic mutex_lock(&u->iolock) skb_peek(&sk->sk_receive_queue) skb_peek_next(skb, &sk->sk_receive_queue) mutex_unlock(&u->iolock) unix_stream_read_generic unix_state_lock(sk) skb_peek(&sk->sk_receive_queue) unix_state_unlock(sk) unix_stream_data_wait unix_state_lock(sk) tail = skb_peek_tail(&sk->sk_receive_queue) spin_lock(&sk->sk_receive_queue.lock) __skb_unlink(skb, &sk->sk_receive_queue) spin_unlock(&sk->sk_receive_queue.lock) consume_skb(skb) [frees the SKB] `tail != last`: false `tail`: true `tail->len != last_len` ***UAF***```Fix the UAF by removing the read of tail->len; checking tail->len wouldonly make sense if SKBs in the receive queue of a UNIX socket could grow,which can no longer happen.Kuniyuki explained:> When commit 869e7c62486e ("net: af_unix: implement stream sendpage> support") added sendpage() support, data could be appended to the last> skb in the receiver's queue.>> That's why we needed to check if the length of the last skb was changed> while waiting for new data in unix_stream_data_wait().>> However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and> commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added> to a new skb.That means this fix is not suitable for kernels before 6.5.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/vmci: fix UAF when peer resets connection during handshakevmci_transport_recv_connecting_server() returned err = 0 for a peerRST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;That made vmci_transport_recv_listen() skip vsock_remove_pending(),leaving the pending socket on the listener's pending_links withsk_state = TCP_CLOSE while destroy: still dropped the explicitreference taken before schedule_delayed_work().One second later vsock_pending_work() observed is_pending=true andperformed full cleanup: vsock_remove_pending() then the two trailingsock_put(sk) calls -- the first reached refcount 0 and __sk_freedthe socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_workTreat peer RST like any other unexpected packet type (err = -EINVAL).All destroy: arms now return err < 0, so vmci_transport_recv_listen()removes pending from pending_links synchronously andvsock_pending_work() takes the is_pending=false / !rejected branch,dropping only its own work reference. This also closes themulti-packet race Sashiko reported on v2: pending is removed fromthe list before any subsequent packet can find it.The pre-existing sk_acceptq_removed() gap on the err < 0 path ofvmci_transport_recv_listen() that Sashiko also noted is notintroduced or changed by this patch.Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: require net admin for CIFS SWN netlinkCIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. Theintended sender is the cifs.witness helper, but the generic-netlinkoperation currently has no capability flag, so any local process can sendRESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witnesshandler.The same family exposes CIFS_GENL_MCGRP_SWN without multicast-groupcapability flags. Register messages sent to that group include the witnessregistration id and, for NTLM-authenticated mounts, the username, domain,and password attributes copied from the CIFS session. An unprivilegedlocal process should not be able to join that group and receive thosemessages.Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands withGENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace forjoining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. Thecifs.witness service runs with the privileges needed for both operations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ipset: fix race between dump and ip_set_list resizeThe release path of ip_set_dump_do() and ip_set_dump_done() readinst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()of the array pointer. These run from netlink_recvmsg() without the nfnlmutex and without an RCU read-side critical section.A concurrent ip_set_create() can grow the array: it publishes the newarray, calls synchronize_net() and then kvfree()s the old one. Since thedump paths read the array outside any RCU reader, synchronize_net() doesnot wait for them and the old array can be freed while they still indexinto it, causing a use-after-free.The dumped set itself stays pinned via set->ref_netlink, so only thearray load needs protecting. Take rcu_read_lock() around it, matchingip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: pcrypt - restore callback for non-parallel fallbackpcrypt installs pcrypt_aead_done() on the child AEAD request beforetrying to submit it through padata. If padata_do_parallel() returns-EBUSY, pcrypt falls back to calling the child AEAD directly.That fallback must not keep the padata completion callback. Otherwisean asynchronous completion runs pcrypt_aead_done() even though therequest was never enrolled in padata.Restore the original request callback and callback data before callingthe child AEAD directly. This keeps the fallback path aligned with adirect AEAD request while leaving the parallel path unchanged.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: hda/cs35l41: Fix firmware load work teardowncs35l41_hda creates ALSA controls whose private data points at thecs35l41_hda object. The firmware load control can also queuefw_load_work.Those controls are not removed on component unbind, and device removeonly cancels fw_load_work through cs35l41_remove_dsp(). That helper isskipped when halo_initialized is false. With firmware_autostartdisabled, a firmware load can be requested before the DSP has beeninitialized. If the component or device is removed before the queuedwork runs, the worker can run after teardown and dereference driverstate that is no longer valid.Track the created controls and remove them on unbind so no new controlcallback can reach the driver data or queue more work. Then cancelfw_load_work to drain any request that was already queued. Also cancelthe work unconditionally during device remove before runtime PM teardown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handletcf_classify() can return TC_ACT_CONSUMED while the skb is held by thedefragmentation engine (e.g. act_ct on out-of-order fragments). Whenthat happens the skb is no longer owned by the caller and must not betouched again.tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through theswitch and returned the skb to the caller as if classification hadpassed. The only qdisc that wires up qevents today is RED, via three call sites(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)red_enqueue() was continuing to operate on an skb it no longer owns in thiscase -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream)Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingressand egress fast paths do: treat it as stolen and return NULL withouttouching the skb. Unlike the TC_ACT_STOLEN case, the skb must not bedropped/freed here, as it is no longer owned by us.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socketsmc_cdc_rx_handler() looks up the connection by token under the linkgroup's conns_lock, drops the lock, and then dereferences conn and thesmc_sock derived from it, ending in sock_hold(&smc->sk) insidesmc_cdc_msg_recv(). No reference is held across the lock release.The only reference pinning the socket while the connection isdiscoverable in the link group is taken in smc_lgr_register_conn()(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), bothunder conns_lock. Once the handler drops conns_lock, a concurrentclose() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()can drop that reference and free the smc_sock, so the handler's latersock_hold() runs on freed memory: WARNING: lib/refcount.c:25 at refcount_warn_saturate Workqueue: rxe_wq do_work refcount_warn_saturate (lib/refcount.c:25) smc_cdc_msg_recv (net/smc/smc_cdc.c:430) smc_cdc_rx_handler (net/smc/smc_cdc.c:502) smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445) tasklet_action_common (kernel/softirq.c:938) handle_softirqs (kernel/softirq.c:622) Kernel panic - not syncing: panic_on_warn setOnly SMC-R is affected. The SMC-D receive tasklet is stopped bytasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connectionis unregistered, so it cannot run concurrently with the free.Take the socket reference while still holding conns_lock, so theregistration reference can no longer be the last one, and drop it oncethe handler is done.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tipc: fix use-after-free of the discoverer in tipc_disc_rcv()bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),but tipc_disc_rcv() still dereferences b->disc in RX softirq underrcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).L2 bearers are safe thanks to the synchronize_net() intipc_disable_l2_media(), but the UDP bearer defers that call to thecleanup_bearer() workqueue, so the discoverer is freed with no graceperiod: BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149) Read of size 8 at addr ffff88802348b728 by task poc_tipc/184 tipc_disc_rcv (net/tipc/discover.c:149) tipc_rcv (net/tipc/node.c:2126) tipc_udp_recv (net/tipc/udp_media.c:391) udp_rcv (net/ipv4/udp.c:2643) ip_local_deliver_finish (net/ipv4/ip_input.c:241) Freed by task 181: kfree (mm/slub.c:6565) bearer_disable (net/tipc/bearer.c:418) tipc_nl_bearer_disable (net/tipc/bearer.c:1001)The bearer is freed with kfree_rcu(); free the discoverer the same way.Add an rcu_head to struct tipc_discoverer and free it and its skb from anRCU callback.Because the RCU callback (tipc_disc_free_rcu) lives in module text, acall_rcu() that is still pending when the tipc module is unloaded wouldinvoke a freed function. Add an rcu_barrier() to tipc_exit() after thebearer subsystem has been torn down, so all pending discoverer callbackshave run before the module text goes away.Reachable from an unprivileged user namespace: the TIPCv2 genl family isnetnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPCand CONFIG_TIPC_MEDIA_UDP.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rhashtable: clear stale iter->p on table restartrhashtable_walk_start_check() has two restart paths when resuming a walk.When iter->walker.tbl is valid, it re-validates iter->p against the tableand sets iter->p = NULL if the object is gone. When iter->walker.tbl isNULL (table was freed during resize), it resets slot and skip but forgetsto clear iter->p.rhashtable_walk_next() then dereferences the stale iter->p, readingfreed memory. This is a use-after-free.Any caller that does multi-fragment rhashtable walks acrosswalk_stop/walk_start boundaries is affected. Concrete cases includenetlink_diag (__netlink_diag_dump in net/netlink/diag.c) and TIPC(tipc_nl_sk_walk in net/tipc/socket.c).Crash stack (netlink_diag): BUG: KASAN: slab-use-after-free in rhashtable_walk_next+0x365/0x3c0 Read of size 8 at addr ffff88801a9d2438 (freed kmalloc-2k, offset 1080) Call Trace: rhashtable_walk_next+0x365/0x3c0 (lib/rhashtable.c:1016) __netlink_diag_dump+0x160/0x760 (net/netlink/diag.c:122) netlink_diag_dump+0xc2/0x240 netlink_dump+0x5bc/0x1270 netlink_recvmsg+0x7a3/0x980 sock_recvmsg+0x1bc/0x200 __sys_recvfrom+0x1d4/0x2c0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: fib: free fib_alias with kfree_rcu() on insert error pathfib_table_insert() publishes new_fa into the leaf's fa_list withfib_insert_alias() before calling the fib entry notifiers. When anotifier fails, the error path removes new_fa with fib_remove_alias()(hlist_del_rcu) and frees it right away with kmem_cache_free().fib_table_lookup() walks that list under rcu_read_lock() only, so aconcurrent lookup that already reached new_fa keeps reading it after thefree: BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601) Read of size 1 at addr ffff88810676d4eb by task exploit/297 Call Trace: fib_table_lookup (net/ipv4/fib_trie.c:1601) ip_route_output_key_hash_rcu (net/ipv4/route.c:2814) ip_route_output_key_hash (net/ipv4/route.c:2705) __ip4_datagram_connect (net/ipv4/datagram.c:49) udp_connect (net/ipv4/udp.c:2144) __sys_connect (net/socket.c:2167) __x64_sys_connect (net/socket.c:2173) do_syscall_64 entry_SYSCALL_64_after_hwframe which belongs to the cache ip_fib_alias of size 56Triggering the error path needs CAP_NET_ADMIN and a registered fibnotifier that can reject a route; a netdevsim device whose IPv4 FIBresource is exhausted is enough.Free new_fa with alias_free_mem_rcu(), as fib_table_delete() alreadydoes for a fib_alias removed from the trie.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: fix sk_dst_cache double-free in xfrm_user_policy()xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(),i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache withrcu_dereference_protected(), stores NULL and dst_release()s the old dst.That is only safe if no other thread modifies sk_dst_cache concurrently.For a connected UDP socket that does not hold: the transmit fast path(udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklesslywith an atomic xchg(). A per-socket policy change racing a send can makeboth sides observe the same old dst and each dst_release() it, droppingthe socket's single reference twice and freeing the xfrm_dst bundle whileit is still referenced: BUG: KASAN: slab-use-after-free in dst_release Write of size 4 at addr ffff88801897b6c0 by task exploit/155 Call Trace: ... dst_release (... ./include/linux/rcuref.h:109) xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053) do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347) ip_setsockopt (net/ipv4/ip_sockglue.c:1417) do_sock_setsockopt (net/socket.c:2368) __sys_setsockopt (net/socket.c:2393) __x64_sys_setsockopt (net/socket.c:2396) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)Reachable by an unprivileged user via a user+network namespace.Use the atomic sk_dst_reset() so the cache is cleared and released with asingle xchg(): whichever side wins releases the dst once, the other seesNULL and does nothing. Behaviour is otherwise unchanged.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In libexpat before 2.8.2, there is a heap-based buffer overflow in doProlog in xmlparse.c because scaffold backing array reallocation is mishandled when there is data-structure sharing across parsers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 has an integer overflow in storeAtts.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 has an integer overflow in addBinding.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 has an integer overflow in getAttributeId.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 has an integer overflow in XML_ParseBuffer because it lacked a check that was present in XML_Parse.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 has an integer overflow in doProlog that is related to storeEntityValue and entity textLen.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 has an integer overflow in copyString.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: xmlwf in libexpat before 2.8.2 has an integer overflow in endDoctypeDecl via NOTATION declarations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: When sed is invoked with both -i (in-place edit) and --follow-symlinks, the function open_next_file() performs two separate, non-atomic filesystem operations on the same path: 1. resolves symlink to its target and stores the resolved path for determining when output is written,2. opens the original symlink path (not the resolved one) to read the file. Between these two calls there is a race window. If an attacker atomically replaces the symlink with a different target during that window, sed will: read content from the new (attacker-chosen) symlink target and write the processed result to the path recorded in step 1. This can lead to arbitrary file overwrite with attacker-controlled content in the context of the sed process.This issue was fixed in version 4.10.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- sed > 0-0 (version in image is 4.9-150600.3.3.1).
Description: A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high.
Packages affected:
- sle-module-desktop-applications-release == 15.6 (version in image is 15.6-150600.37.2).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to version 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_do_quantize function when processing PNG files with malformed palette indices. The vulnerability occurs when palette_lookup array bounds are not validated against externally-supplied image data, allowing an attacker to craft a PNG file with out-of-range palette indices that trigger out-of-bounds memory access. This issue has been patched in version 1.6.51.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_write_image_8bit function when processing 8-bit images through the simplified write API with convert_to_8bit enabled. The vulnerability affects 8-bit grayscale+alpha, RGB/RGBA, and images with incomplete row data. A conditional guard incorrectly allows 8-bit input to enter code expecting 16-bit input, causing reads up to 2 bytes beyond allocated buffer boundaries. This issue has been patched in version 1.6.51.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, an out-of-bounds read vulnerability exists in png_image_read_composite when processing palette images with PNG_FLAG_OPTIMIZE_ALPHA enabled. The palette compositing code in png_init_read_transformations incorrectly applies background compositing during premultiplication, violating the invariant component ≤ alpha x 257 required by the simplified PNG API. This issue has been patched in version 1.6.51.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, there is a heap buffer overflow vulnerability in the libpng simplified API function png_image_finish_read when processing 16-bit interlaced PNGs with 8-bit output format. Attacker-crafted interlaced PNG files cause heap writes beyond allocated buffer bounds. This issue has been patched in version 1.6.51.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: BIND may accept incorrect child-zone NSEC3 records as valid, which could allow an attacker to forge authenticated NXDOMAIN responses.This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.50-150600.3.32.1 (version in image is 9.18.33-150600.3.21.1).
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.6.26 to 1.6.53, there is an integer truncation in the libpng simplified write API functions png_write_image_16bit and png_write_image_8bit causes heap buffer over-read when the caller provides a negative row stride (for bottom-up image layouts) or a stride exceeding 65535 bytes. The bug was introduced in libpng 1.6.26 (October 2016) by casts added to silence compiler warnings on 16-bit systems. This vulnerability is fixed in 1.6.54.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: jq is a command-line JSON processor. An integer overflow vulnerability exists through version 1.8.1 within the jvp_string_append() and jvp_string_copy_replace_bad functions, where concatenating strings with a combined length exceeding 2^31 bytes causes a 32-bit unsigned integer overflow in the buffer allocation size calculation, resulting in a drastically undersized heap buffer. Subsequent memory copy operations then write the full string data into this undersized buffer, causing a heap buffer overflow classified as CWE-190 (Integer Overflow) leading to CWE-122 (Heap-based Buffer Overflow). Any system evaluating untrusted jq queries is affected, as an attacker can crash the process or potentially achieve further exploitation through heap corruption by crafting queries that produce extremely large strings. The root cause is the absence of string size bounds checking, unlike arrays and objects which already have size limits. The issue has been addressed in commit e47e56d226519635768e6aab2f38f0ab037c09e5.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Fix slab-out-of-bounds access in auth message processingIf a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLYcontains a positive value in its result field, it is treated as anerror code by ceph_handle_auth_reply() and returned tohandle_auth_reply(). Thereafter, an attempt is made to send thepreallocated message of type CEPH_MSG_AUTH, where the returned value isinterpreted as the size of the front segment to send. If the resultvalue in the message is greater than the size of the memory bufferallocated for the front segment, an out-of-bounds access occurs, andthe content of the memory region beyond this buffer is sent out.This patch fixes the issue by treating only negative values in theresult field as errors. Positive values are therefore treated as successin the same way as a zero value. Additionally, a BUG_ON is added to__send_prepared_auth_request() comparing the len parameter tofront_alloc_len to prevent sending the message if it exceeds the boundsof the allocation and to make it easier to catch any logic flaws leadingto this.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size[Why & How]During HDCP 2.x repeater authentication over HDMI, the driver reads thesink's RxStatus register and extracts a 10-bit message size field (maxvalue 1023). This value is used as the read length for the ReceiverIDlist without being clamped to the size of the destination bufferrx_id_list[177]. A malicious HDMI repeater could advertise a messagesize larger than the buffer, causing an out-of-bounds write during theI2C read.Clamp the read length in mod_hdcp_read_rx_id_list() to the size of therx_id_list buffer, matching the approach already used in the DP branch.(cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()build_i2c_fw_hdr() allocates a fixed-size buffer of(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, thencopies le16_to_cpu(img_header->Length) bytes into it withoutvalidating that Length fits within the available space after thefirmware record header.img_header->Length is a __le16 from the firmware file and can beup to 65535. check_fw_sanity() validates the total firmware sizebut not img_header->Length specifically.Fix by rejecting images where img_header->Length exceeds theavailable destination space.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: io_ti: fix heap overflow in get_manuf_info()get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from thedevice I2C EEPROM into a buffer allocated with kmalloc_obj(), whichis sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.The Size field comes from the device and is only validated (incheck_i2c_image()) to make sure the descriptor fits withinTI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.A malicious USB device can therefore set Size to any value up to 16377,causing a heap overflow of up to 16367 bytes when plugged into a hostrunning this driver.valid_csum() is called after read_rom() and also iteratesbuffer[0..Size-1], compounding the out-of-bounds access.Fix by rejecting descriptors with unexpected length before callingread_rom().[ johan: amend commit message; also check for short descriptors ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: bridge: make ebt_snat ARP rewrite writableThe ebtables SNAT target keeps the Ethernet source address rewritebehind skb_ensure_writable(skb, 0). This is intentional: at the bridgeebtables hooks the Ethernet header is addressed throughskb_mac_header()/eth_hdr(), while skb->data points at the Ethernetpayload. Asking skb_ensure_writable() for ETH_HLEN bytes would checkthe payload, not the Ethernet header, and would reintroduce the smallpacket regression fixed by commit 63137bc5882a.However, the optional ARP sender hardware address rewrite is different.It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)skb_header_pointer() only safely reads the ARP header; it does not makethe later sender hardware address range writable. If that range isstill held in a nonlinear skb fragment backed by a splice-imported filepage, skb_store_bits() maps the frag page and copies the new MAC addressdirectly into it.Ensure the ARP SHA range is writable before reading the ARP header andbefore calling skb_store_bits().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: mct_u232: fix memory corruption with small endpointThe driver overrides the maximum transfer size for a specific devicewhich only accepts 16 byte packets for its 32 byte bulk-out endpoint.Make sure to never increase the maximum transfer size to prevent slabcorruption should a malicious device report a smaller endpoint maxpacket size than expected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: mxuport: fix memory corruption with small endpointMake sure that the bulk-out endpoint max packet size is at least eightbytes to avoid user-controlled slab corruption should a malicious devicereport a smaller size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: cypress_m8: fix memory corruption with small endpointMake sure that the interrupt-out endpoint max packet size is at leasteight bytes to avoid user-controlled slab corruption or NULL-pointerdereference should a malicious device report a smaller size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: safe_serial: fix memory corruption with small endpointMake sure that the bulk-out buffer size is at least eight bytes to avoiduser-controlled slab corruption in "safe" mode should a malicious devicereport a smaller size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: ucsi: validate connector number in ucsi_connector_change()The connector number in a UCSI CCI notification is a 7-bit fieldsupplied by the PPM. ucsi_connector_change() uses it to index theucsi->connector[] array without checking it against the number ofconnectors the PPM reported at init time, so a buggy or malicious PPM(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /glink transports) can drive schedule_work() on memory past the end ofthe array.Reject connector numbers that are zero or exceed cap.num_connectorsbefore dereferencing the array.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNTA broken/malicious port can transmit a CRC-valid frame whose headeradvertises up to seven data objects but whose body carries fewer thanthat. Check for this, and rightfully reject the message, instead ofreading from uninitialized stack memory.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()wcove_read_rx_buffer() copies the PD RX FIFO into the caller'sstruct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);which has two problems:USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_messageis 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).The byte count latched in RXINFO is the number of bytes the port partnerput on the wire, so a malicious partner that transmits a 31-byte framecan drive the loop one byte past the destination if the WCOVE BMCreceiver does not enforce the PD object-count limit in hardware. Theexisting FIXME flagged this as unverified.Independently, regmap_read() takes an unsigned int * and stores a fullunsigned int at the destination. Passing the byte pointer msg + i meanseach iteration writes four bytes; the high three are zero (val_bits is8) and are normally overwritten by the next iteration, but the finaliteration's high bytes are not. With RXBYTES == 30 the i == 29 iterationalready writes three zero bytes past msg, which sits on the IRQ thread'sstack in wcove_typec_irq().Clamp the loop to sizeof(struct pd_message) and read each register intoa local before storing only its low byte, so the copy can never exceedthe destination regardless of what RXINFO reports.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: altmodes/displayport: validate count before reading Status Update VDOA broken/malicious device can send the incorrect count for a statusupdate VDO, which will cause the kernel to read uninitialized stack dataand send it off elsewhere.Fix this up by correctly verifying the count for the update object.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()svdm_consume_modes() checks pmdata->altmodes against the array size oncebefore the loop over the count, but forgot to check the bound at everypoint in the loop.In the well-behaved SVDM discovery flow this is harmless because each ofat most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAXmodes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But theCMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incomingACK with any request the port actually sent. Once port->partner is set,an unsolicited Discover Modes ACK is consumed unconditionally. A brokenor malicious port partner can therefore drive altmodes toALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extraDiscover Modes ACK with seven VDOs. Because the pre-loop check passes,the loop could then writes up to five entries past altmode_desc[]. Formode_data_prime the next field in struct tcpm_port is thepartner_altmode[] pointer array, which then receives partner-chosenSVID/VDO bytes.Move the bound check inside the loop so the array can never be indexedpast ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partnersupplies or how the function was reached.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: digi_acceleport: fix write buffer corruptionThe digi_write_inb_command() is supposed to wait for the write urb tobecome available or return an error, but instead it updates the transferbuffer and tries to resubmit the urb on timeout.To make things worse, for commands like break control where no timeoutis used, the driver would corrupt the urb immediately due to a brokenjiffies comparison (on 32-bit machines this takes five minutes of uptimeto trigger due to INITIAL_JIFFIES).Fix this by adding the missing return on timeout and waitingindefinitely when no timeout has been specified as intended.This issue was (sort of) flagged by Sashiko when reviewing an unrelatedchange to the driver.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()The `ims_pcu_process_data()` processes incoming URB data byte by byte.However, it fails to check if the `read_pos` index exceedsIMS_PCU_BUF_SIZE.If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE,`read_pos` will increment indefinitely. Moreover, since `read_pos` islocated immediately after `read_buf`, the attacker can overwrite`read_pos` itself to arbitrarily control the index.This manipulated `read_pos` is subsequently used in`ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to aheap buffer overflow.Specifically, an attacker can overwrite the `cmd_done.wait.head` locatedat offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`.Consequently, when the driver calls `complete(&pcu->cmd_done)`, ittriggers a control flow hijack by using the manipulated pointer.Fix this by adding a bounds check for `read_pos` before writing to`read_buf`. If the packet is too long, discard it, log a warning,and reset the parser state.[dtor: factor out resetting packet state, reset checksum as well]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: esd_usb: kill anchored URBs before freeing netdevsesd_usb_disconnect() frees each CAN netdev with free_candev() insideits per-netdev loop and only calls unlink_all_urbs(dev) afterwards.The per-netdev private data (struct esd_usb_net_priv) is embedded inthe net_device allocation returned by alloc_candev(), so oncefree_candev() has run, dev->nets[i] points to freed memory.unlink_all_urbs() then dereferences the freed dev->nets[i] to kill theper-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)),clear active_tx_jobs, and reset priv->tx_contexts[].Reorder the teardown so the anchored URBs are killed before the netdevsare freed, matching other CAN/USB drivers in the same directory such asems_usb, usb_8dev and mcba_usb, which unregister, then unlink, thenfree: unregister the netdevs first (which stops their TX queues), callunlink_all_urbs(dev) once, then free the netdevs.This issue was found by an in-house static analysis tool.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qedf: Ensure the copied buf is NUL terminatedCurrently, we allocate a count-sized kernel buffer and copy count fromuserspace to that buffer. Later, we use kstrtouint on this buffer but wedon't ensure that the string is terminated inside the buffer, this canlead to OOB read when using kstrtouint. Fix this issue by usingmemdup_user_nul instead of memdup_user.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: Fix potential glock use-after-free on unmountWhen a DLM lockspace is released and there ares still locks in thatlockspace, DLM will unlock those locks automatically. Commitfb6791d100d1b started exploiting this behavior to speed up filesystemunmount: gfs2 would simply free glocks it didn't want to unlock and thenrelease the lockspace. This didn't take the bast callbacks forasynchronous lock contention notifications into account, which remainactive until until a lock is unlocked or its lockspace is released.To prevent those callbacks from accessing deallocated objects, put theglocks that should not be unlocked on the sd_dead_glocks list, releasethe lockspace, and only then free those glocks.As an additional measure, ignore unexpected ast and bast callbacks ifthe receiving glock is dead.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/rsrc: don't rely on user vaddr alignmentThere is no guaranteed alignment for user pointers, however thecalculation of an offset of the first page into a folio after coalescinguses some weird bit mask logic, get rid of it.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mlxsw: spectrum_router: Fix neighbour use-after-freeWe sometimes observe use-after-free when dereferencing a neighbour [1].The problem seems to be that the driver stores a pointer to theneighbour, but without holding a reference on it. A reference is onlytaken when the neighbour is used by a nexthop.Fix by simplifying the reference counting scheme. Always take areference when storing a neighbour pointer in a neighbour entry. Avoidtaking a referencing when the neighbour is used by a nexthop as theneighbour entry associated with the nexthop already holds a reference.Tested by running the test that uncovered the problem over 300 times.Without this patch the problem was reproduced after a handful ofiterations.[1]BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310Read of size 8 at addr ffff88817f8e3420 by task ip/3929CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full)Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023Call Trace: dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110 mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510 mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0 __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0 mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150 call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210 netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0 do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90 netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90 __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53[...]Allocated by task 109: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90 mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960 mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0 mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0 mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20Freed by task 154: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260 kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20Last potentially related work creation: kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0 mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfsd: provide locking for v4_end_graceWriting to v4_end_grace can race with server shutdown and result inmemory being accessed after it was freed - reclaim_str_hashtbl inparticularly.We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that isheld while client_tracking_op->init() is called and that can wait foran upcall to nfsdcltrack which can write to v4_end_grace, resulting in adeadlock.nfsd4_end_grace() is also called by the landromat work queue and thisdoesn't require locking as server shutdown will stop the work and waitfor it before freeing anything that nfsd4_end_grace() might access.However, we must be sure that writing to v4_end_grace doesn't restartthe work item after shutdown has already waited for it. For this weadd a new flag protected with nn->client_lock. It is set only while itis safe to make client tracking calls, and v4_end_grace only scheduleswork while the flag is set with the spinlock held.So this patch adds a nfsd_net field "client_tracking_active" which isset as described. Another field "grace_end_forced", is set whenv4_end_grace is written. After this is set, and providingclient_tracking_active is set, the laundromat is scheduled.This "grace_end_forced" field bypasses other checks for whether thegrace period has finished.This resolves a race which can result in use-after-free.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bcache: fix cached_dev.sb_bio use-after-free and crashIn our production environment, we have received multiple crash reportsregarding libceph, which have caught our attention:```[6888366.280350] Call Trace:[6888366.280452] blk_update_request+0x14e/0x370[6888366.280561] blk_mq_end_request+0x1a/0x130[6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd][6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd][6888366.280903] __complete_request+0x22/0x70 [libceph][6888366.281032] osd_dispatch+0x15e/0xb40 [libceph][6888366.281164] ? inet_recvmsg+0x5b/0xd0[6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph][6888366.281405] ceph_con_process_message+0x79/0x140 [libceph][6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph][6888366.281661] ceph_con_workfn+0x329/0x680 [libceph]```After analyzing the coredump file, we found that the address ofdc->sb_bio has been freed. We know that cached_dev is only freed when itis stopped.Since sb_bio is a part of struct cached_dev, rather than an alloc everytime. If the device is stopped while writing to the superblock, thereleased address will be accessed at endio.This patch hopes to wait for sb_write to complete in cached_dev_free.It should be noted that we analyzed the cause of the problem, then tellall details to the QWEN and adopted the modifications it made.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: qcom: q6apm: move component registration to unmanaged versionq6apm component registers dais dynamically from ASoC toplology, whichare allocated using device managed version apis. Allocating bothcomponent and dynamic dais using managed version could lead to incorrectfree ordering, dai will be freed while component still holding referencesto it.Fix this issue by moving component to unmanged version sothat the dai pointers are only freeded after the component is removed.==================================================================BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426Tainted: [W]=WARNHardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface]Call trace: show_stack+0x28/0x7c (C) dump_stack_lvl+0x60/0x80 print_report+0x160/0x4b4 kasan_report+0xac/0xfc __asan_report_load8_noabort+0x20/0x34 snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core] devm_component_release+0x30/0x5c [snd_soc_core] devres_release_all+0x13c/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20Allocated by task 77: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x44/0x58 __kasan_kmalloc+0xbc/0xdc __kmalloc_node_track_caller_noprof+0x1f4/0x620 devm_kmalloc+0x7c/0x1c8 snd_soc_register_dai+0x50/0x4f0 [snd_soc_core] soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core] snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core] audioreach_tplg_init+0x124/0x1fc [snd_q6apm] q6apm_audio_probe+0x10/0x1c [snd_q6apm] snd_soc_component_probe+0x5c/0x118 [snd_soc_core] soc_probe_component+0x44c/0xaf0 [snd_soc_core] snd_soc_bind_card+0xad0/0x2370 [snd_soc_core] snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core] devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core] x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100] platform_probe+0xc0/0x188 really_probe+0x188/0x804 __driver_probe_device+0x158/0x358 driver_probe_device+0x60/0x190 __device_attach_driver+0x16c/0x2a8 bus_for_each_drv+0x100/0x194 __device_attach+0x174/0x380 device_initial_probe+0x14/0x20 bus_probe_device+0x124/0x154 deferred_probe_work_func+0x140/0x220 process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20Freed by task 3426: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 __kasan_save_free_info+0x4c/0x80 __kasan_slab_free+0x78/0xa0 kfree+0x100/0x4a4 devres_release_all+0x144/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRYfilemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY,as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()."When this happens, a concurrent munmap() can call remove_vma() and freethe vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() thenbecomes a dangling pointer, and the subsequent trace_ocfs2_fault() calldereferences it -- a use-after-free.Fix this by saving ip_blkno as a plain integer before callingfilemap_fault(), and removing vma from the trace event. Sinceip_blkno is copied by value before the lock can be dropped, itremains valid regardless of what happens to the vma or inodeafterward.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: s3c24xx: check the size of the SMBUS message before using itThe first byte of an i2c SMBUS message is the size, and it should beverified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAXbefore processing it.This is the same logic that was added in commit a6e04f05ce0b ("i2c:tegra: check msg length in SMBUS block read") to the i2c tegra driver.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:openvswitch: validate MPLS set/set_masked payload lengthvalidate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload forSET/SET_MASKED actions. In action handling, OVS expects fixed-sizeMPLS key data (struct ovs_key_mpls).Use the already normalized key_len (masked case included) and rejectnon-matching MPLS action key sizes.Reject invalid MPLS action payload lengths early.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/kasan: fix double free for kasan pXdskasan_free_pxd() assumes the page table is always struct page aligned. But that's not always the case for all architectures. E.g. In case ofpowerpc with 64K pagesize, PUD table (of size 4096) comes from slab cachenamed pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's justdirectly pass the start of the pxd table which is passed as the 1stargument.This fixes the below double free kasan issue seen with PMEM:radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages==================================================================BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20Free of addr c0000003c38e0000 by task ndctl/2164CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARYHardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeriesCall Trace: dump_stack_lvl+0x88/0xc4 (unreliable) print_report+0x214/0x63c kasan_report_invalid_free+0xe4/0x110 check_slab_allocation+0x100/0x150 kmem_cache_free+0x128/0x6e0 kasan_remove_zero_shadow+0x9c4/0xa20 memunmap_pages+0x2b8/0x5c0 devm_action_release+0x54/0x70 release_nodes+0xc8/0x1a0 devres_release_all+0xe0/0x140 device_unbind_cleanup+0x30/0x120 device_release_driver_internal+0x3e4/0x450 unbind_store+0xfc/0x110 drv_attr_store+0x78/0xb0 sysfs_kf_write+0x114/0x140 kernfs_fop_write_iter+0x264/0x3f0 vfs_write+0x3bc/0x7d0 ksys_write+0xa4/0x190 system_call_exception+0x190/0x480 system_call_vectored_common+0x15c/0x2ec---- interrupt: 3000 at 0x7fff93b3d3f4NIP: 00007fff93b3d3f4 LR: 00007fff93b3d3f4 CTR: 0000000000000000REGS: c0000003f1b07e80 TRAP: 3000 Not tainted (6.19.0-rc1-00048-gea1013c15392)MSR: 800000000280f033 CR: 48888208 XER: 00000000<...>NIP [00007fff93b3d3f4] 0x7fff93b3d3f4LR [00007fff93b3d3f4] 0x7fff93b3d3f4---- interrupt: 3000 The buggy address belongs to the object at c0000003c38e0000 which belongs to the cache pgtable-2^9 of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [c0000003c38e0000, c0000003c38e1000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3c38c head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:c0000003bfd63e01 flags: 0x63ffff800000040(head|node=6|zone=0|lastcpupid=0x7ffff) page_type: f5(slab) raw: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 head: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000002 c00c000000f0e301 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected[ 138.953636] [ T2164] Memory state around the buggy address:[ 138.953643] [ T2164] c0000003c38dff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc[ 138.953652] [ T2164] c0000003c38dff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc[ 138.953661] [ T2164] >c0000003c38e0000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc[ 138.953669] [ T2164] ^[ 138.953675] [ T2164] c0000003c38e0080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc[ 138.953684] [ T2164] c0000003c38e0100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc[ 138.953692] [ T2164] ==================================================================[ 138.953701] [ T2164] Disabling lock debugging due to kernel taint
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: validate inline data i_size during inode readWhen reading an inode from disk, ocfs2_validate_inode_block() performsvarious sanity checks but does not validate the size of inline data. Ifthe filesystem is corrupted, an inode's i_size can exceed the actualinline data capacity (id_count).This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline databuffer, triggering a use-after-free when accessing directory entries fromfreed memory.In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typically <256 bytes - A garbage rec_len (54648) caused ctx->pos to jump out of bounds - This triggered a UAF in ocfs2_check_dir_entry()Fix by adding a validation check in ocfs2_validate_inode_block() to ensureinodes with inline data have i_size <= id_count. This catches thecorruption early during inode read and prevents all downstream code fromoperating on invalid data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev toobtain a struct vidi_context pointer. However, drm_dev->dev is theexynos-drm master device, and the driver_data contained therein is notthe vidi component device, but a completely different device.This can lead to various bugs, ranging from null pointer dereferences andgarbage value accesses to, in unlucky cases, out-of-bounds errors,use-after-free errors, and more.To resolve this issue, we need to store/delete the vidi device pointer inexynos_drm_private->vidi_dev during bind/unbind, and then read thisexynos_drm_private->vidi_dev within ioctl() to obtain the correctstruct vidi_context pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, arm64: Fix off-by-one in check_imm signed range checkcheck_imm(bits, imm) is used in the arm64 BPF JIT to verify thata branch displacement (in arm64 instruction units) fits into thesigned N-bit immediate field of a B, B.cond or CBZ/CBNZ encodingbefore it is handed to the encoder. The macro currently tests for(imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admitsvalues in [-2^N, 2^N) - effectively a signed (N+1)-bit range. Asigned N-bit field only holds [-2^(N-1), 2^(N-1)), so the checkadmits one extra bit of range on each side.In particular, for check_imm19(), values in [2^18, 2^19) slip pastthe check but do not fit into the 19-bit signed imm19 field ofB.cond. aarch64_insn_encode_immediate() then masks the raw valueinto the 19-bit field, setting bit 18 (the sign bit) and flippinga forward branch into a backward one. Same class of issue existsfor check_imm26() and the B/BL encoding. Shift by (bits - 1)instead of bits so the actual signed N-bit range is enforced.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix same-register dst/src OOB read and pointer leak in sock_opsWhen a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero thedestination register in the !fullsock / !locked_tcp_sock path.Both macros borrow a temporary register to check is_fullsock /is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds thectx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state witha request_sock), dst_reg should be zeroed but is not, leaving the stalectx pointer: - SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer, leading to stack-out-of-bounds access in helpers like bpf_skc_to_tcp6_sock(). - SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the verifier believes is a SCALAR_VALUE, leaking a kernel pointer.Fix both macros by: - Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the added instruction. - Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register restore in the !fullsock path, placed after the restore because dst_reg == src_reg means we need src_reg intact to read ctx->temp.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalarsWhen regsafe() compares two scalar registers that both carryBPF_ADD_CONST, check_scalar_ids() maps their full compound id(aka base | BPF_ADD_CONST flag) as one idmap entry. However,it never verifies that the underlying base ids, that is, withthe flag stripped are consistent with existing idmap mappings.This allows construction of two verifier states where the oldstate has R3 = R2 + 10 (both sharing base id A) while the currentstate has R3 = R4 + 10 (base id C, unrelated to R2). The idmapcreates two independent entries: A->B (for R2) and A|flag->C|flag(for R3), without catching that A->C conflicts with A->B. Statepruning then incorrectly succeeds.Fix this by additionally verifying base ID mapping consistencywhenever BPF_ADD_CONST is set: after mapping the compound ids,also invoke check_ids() on the base IDs (flag bits stripped).This ensures that if A was already mapped to B from comparingthe source register, any ADD_CONST derivative must also derivefrom B, not an unrelated C.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix ld_{abs,ind} failure path analysis in subprogsUsage of ld_{abs,ind} instructions got extended into subprogs some timeago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). Theseare only allowed in subprograms when the latter are BTF annotated andhave scalar return types.The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 +exit) from legacy cBPF times. While the enforcement is on scalar returntypes, the verifier must also simulate the path of abnormal exit if thepacket data load via ld_{abs,ind} failed.This is currently not the case. Fix it by having the verifier simulateboth success and failure paths, and extend it in similar ways as we dofor tail calls. The success path (r0=unknown, continue to next insn) ispushed onto stack for later validation and the r0=0 and return to thecaller is done on the fall-through side.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Clamp VBIOS HDMI retimer register count to array size[Why & How]The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum andHdmi6GRegNum fields that are used as loop bounds when copying retimer I2Cregister settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validatedbefore use, so a malformed VBIOS can specify values up to 255, causing anout-of-bounds heap write during driver probe.Clamp each register count to the destination array size using min_t()before the copy loops, in both get_integrated_info_v11() andget_integrated_info_v2_1().(cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mvpp2: limit XDP frame size to the RX buffermvpp2 has short and long BM pools, and short pool buffers can be smallerthan PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff withPAGE_SIZE as frame size.XDP helpers use frame_sz to validate tail growth and to derive the hardend of the data area. Advertising PAGE_SIZE for short buffers can letbpf_xdp_adjust_tail() grow a packet past the real allocation, corruptingmemory or later tripping skb tailroom checks.Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matchesthe actual buffer backing the packet.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, skmsg: fix verdict sk_data_ready racing with ktls rxsk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() anddefers to psock->saved_data_ready when a TLS RX context is present,avoiding a conflict with the TLS strparser's ownership of the receivequeue (commit e91de6afa81c, "bpf: Fix running sk_skb program typeswith ktls").sk_psock_verdict_data_ready() has no equivalent guard. When a socketis inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX isconfigured, tls_sw_strparser_arm() saves sk_psock_verdict_data_readyas rx_ctx->saved_data_ready. On data arrival: tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready -> saved_data_ready() = sk_psock_verdict_data_ready() -> tcp_read_skb() drains sk_receive_queue via __skb_unlink() without calling tcp_eat_skb(), so copied_seq is not advanced.tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), callstcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), andreturns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned(potentially freed) skb. tls_decrypt_sg() subsequently walks thatfrag_list: use-after-free.Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX contextis present, call psock->saved_data_ready (sock_def_readable) to wakerecv() waiters and return immediately, leaving the receive queueuntouched. TLS retains sole ownership of the queue and decrypts therecord normally through tls_sw_recvmsg().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: stub: Reject I2C block transfers with invalid lengthThe I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]as the transfer length. The existing check only clamps it to avoidoverrunning the chip->words[256] register array, but does not validateit against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the unioni2c_smbus_data.block buffer (34 bytes total). The driver is adevelopment/test tool (CONFIG_I2C_STUB=m, not built by default)that must be loaded with a chip_addr= parameter.A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctlwith I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causingstub_xfer() to read or write past the end of the unioni2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) The bug exists because i2c-stub implements .smbus_xfer directly,bypassing the I2C_SMBUS_BLOCK_MAX validation ini2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the samefunction correctly validates against I2C_SMBUS_BLOCK_MAX, but theI2C_SMBUS_I2C_BLOCK_DATA case does not.Fix by rejecting transfers with data->block[0] == 0 ordata->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent withboth the I2C_SMBUS_BLOCK_DATA case in the same function and theI2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: ecc - Fix carry overflow in vli multiplicationThe carry flag calculation fails when r01.m_high is saturated(0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows.The condition (r01.m_high < product.m_high) doesn't handle the casewhere r01.m_high == product.m_high and an additional carry existsfrom lower-bit overflow.When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support")introduced crypto/ecc.c, it split the muladd() function in themicro-ecc library into separate mul_64_64() and add_128_128() helpers.It seems the check got lost in translation.Add proper handling for this boundary by accounting for the carryfrom the lower addition.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: fix fils_discovery double free on alloc failureieee80211_set_fils_discovery() calls kfree_rcu() on the old templatebefore allocating the replacement. If the kzalloc() then fails, itreturns -ENOMEM while link->u.ap.fils_discovery still points at theobject already queued for freeing. A later update or AP teardown(ieee80211_stop_ap()) re-queues that same rcu_head; the second free iscaught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800c065280 by task swapper/0/0 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-96 of size 96Queue the old object for kfree_rcu() only after the new one is published,matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: qca: fix NVM tag length underflow in TLV parserIn the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is"while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signedint from the firmware TLV header and sizeof(struct tlv_type_nvm) is asize_t (12), so "length" is converted to size_t and any firmware-supplied"length" < 12 makes the subtraction wrap to a huge value. The loop bodythen reads a 12-byte struct tlv_type_nvm past the end of the shortvmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it).Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; bothoperands are non-negative, so it no longer underflows and a "length" toosmall for one record correctly skips the loop. BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421) Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52 Workqueue: hci0 hci_power_on Call Trace: ... kasan_report (mm/kasan/report.c:595) qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617) qca_uart_setup (drivers/bluetooth/btqca.c:948) qca_setup (drivers/bluetooth/hci_qca.c:2029) hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438) hci_dev_open_sync (net/bluetooth/hci_sync.c:5227) hci_power_on (net/bluetooth/hci_core.c:920) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: tear down new links on vif update error pathWhen ieee80211_vif_update_links() adds new links it allocates a linkcontainer for each and calls ieee80211_link_init() (which registers theper-link debugfs files with file->private_data pointing into the container)and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails,the error path restores the old pointers and jumps to 'free', which freesthe new containers but never removes their debugfs entries or stops thelinks. The debugfs files survive with file->private_data dangling at thefreed container, so a later open()+read() (e.g. link-1/txpower)dereferences freed memory in ieee80211_if_read_link(), a use-after-free.The removal path already dismantles links correctly viaieee80211_tear_down_links(), which removes each link's keys and debugfsentries and calls ieee80211_link_stop(); the add path on the error branchdoes not. Commit be1ba9ed221f ("wifi: mac80211: avoid weird state in errorpath") hardened this same error path for the link-removal case(new_links == 0) but left the newly-added links' teardown unaddressed.drv_change_vif_links() can fail at runtime on MLO drivers (internalallocation / queue / firmware command failures).Remove the new links' debugfs entries and stop them before freeing. BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Read of size 8 at addr ffff888011290000 by task exploit/145 Call Trace: ... ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) short_proxy_read (fs/debugfs/file.c:373) vfs_read (fs/read_write.c:572) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Kernel panic - not syncing: Fatal exception
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-iocost: avoid out of bounds shiftUBSAN catches undefined behavior in blk-iocost, where sometimesiocg->delay is shifted right by a number that is too large,resulting in undefined behavior on some architectures.[ 186.556576] ------------[ cut here ]------------UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S E N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020Call Trace: dump_stack_lvl+0x8f/0xe0 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 iocg_kick_delay+0x30b/0x310 ioc_timer_fn+0x2fb/0x1f80 __run_timer_base+0x1b6/0x250...Avoid that undefined behavior by simply taking the"delay = 0" branch if the shift is too large.I am not sure what the symptoms of an undefined valuedelay will be, but I suspect it could be more than alittle annoying to debug.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Stack-based buffer overflow in libtasn1 version: v4.20.0. The function fails to validate the size of input data resulting in a buffer overflow in asn1_expend_octet_string.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libtasn1 > 0-0 (version in image is 4.13-150000.4.14.1).
Description: In the Linux kernel, the following vulnerability has been resolved:team: Move team device type change at the end of team_port_addAttempting to add a port device that is already up will expectedly fail,but not before modifying the team device header_ops.In the case of the syzbot reproducer the gre0 device isalready in state UP when it attempts to add it as aport device of team0, this fails but before thatheader_ops->create of team0 is changed from eth_header to ipgre_headerin the call to team_dev_type_check_change.Later when we end up in ipgre_header() struct ip_tunnel* points to nonsenseas the private data of the device still holds a struct team.Example sequence of iproute2 commands to reproduce the hang/BUG():ip link add dev team0 type teamip link add dev gre0 type greip link set dev gre0 upip link set dev gre0 master team0ip link set dev team0 upping -I team0 1.1.1.1Move team_dev_type_check_change down where all other checks have passedas it changes the dev type with no way to restore it in caseone of the checks that follow it fail.Also make sure to preserve the origial mtu assignment: - If port_dev is not the same type as dev, dev takes mtu from port_dev - If port_dev is the same type as dev, port_dev takes mtu from devThis is done by adding a conditional before the call to dev_set_mtuto prevent it from assigning port_dev->mtu = dev->mtu and insteadletting team_dev_type_check_change assign dev->mtu = port_dev->mtu.The conditional is needed because the patch moves the call toteam_dev_type_check_change past dev_set_mtu.Testing: - team device driver in-tree selftests - Add/remove various devices as slaves of team device - syzbot
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()Blamed commit did not take care of VLAN encapsulationsas spotted by syzbot [1].Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull().[1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fUninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fCPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: Coalesce only linear skbvsock/virtio common tries to coalesce buffers in rx queue: if a linear skb(with a spare tail room) is followed by a small skb (length limited byGOOD_COPY_LEN = 128), an attempt is made to join them.Since the introduction of MSG_ZEROCOPY support, assumption that a small skbwill always be linear is incorrect. In the zerocopy case, data is lost andthe linear skb is appended with uninitialized kernel memory.Of all 3 supported virtio-based transports, only loopback-transport isaffected. G2H virtio-transport rx queue operates on explicitly linear skbs;see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2Gvhost-transport may allocate non-linear skbs, but only for sizes that arenot considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER invirtio_vsock_alloc_skb().Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0guarantees last_skb is linear.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardwareplatforms, it has already started the EC and installed the addressspace handler with the struct acpi_ec pointer as handler context.However, acpi_ec_setup() propagates the error without any cleanup.The caller acpi_ec_add() then frees the struct acpi_ec for non-bootinstances, leaving a dangling handler context in ACPICA.Any subsequent AML evaluation that accesses an EC OpRegion fielddispatches into acpi_ec_space_handler() with the freed pointer,causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751)The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)when the GPIO IRQ provider defers probing. Once the stale handlerexists, any unprivileged sysfs read that causes AML to touch anEC OpRegion (battery, thermal, backlight) exercises the danglingpointer.Fix this by calling ec_remove_handlers() in the error path ofacpi_ec_setup() before clearing first_ec. ec_remove_handlers()checks each EC_FLAGS_* bit before acting, so it is safe to callregardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop()dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro,which expects hsotg->lock to be held since it does spin_unlock/spin_lockaround the gadget driver callback invocation.However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating()without holding the lock. This leads to: - spin_unlock on a lock that is not held (undefined behavior) - The lock remaining held after dwc2_gadget_exit_clock_gating() returns, causing a deadlock when spin_lock_irqsave() is called later in the same function.Fix this by acquiring hsotg->lock before callingdwc2_gadget_exit_clock_gating() and releasing it afterwards, whichsatisfies the locking requirement of the call_gadget() macro.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: jq is a command-line JSON processor. In 1.8.1 and earlier, jv_contains recurses into nested arrays/objects with no depth limit. With a sufficiently nested input structure (built programmatically with reduce, since the JSON parser caps at depth 10000), the C stack is exhausted.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0357, A command injection vulnerability exists in Vim's tag file processing. When resolving a tag, the filename field from the tags file is passed through wildcard expansion to resolve environment variables and wildcards. If the filename field contains backtick syntax (e.g., `command`), Vim executes the embedded command via the system shell with the full privileges of the running user.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: vidtv: fix pass-by-value structs causing MSAN warningsvidtv_ts_null_write_into() and vidtv_ts_pcr_write_into() take theirargument structs by value, causing MSAN to report uninit-value warnings.While only vidtv_ts_null_write_into() has triggered a report so far,both functions share the same issue.Fix by passing both structs by const pointer instead, avoiding thestack copy of the struct along with its MSAN shadow and origin metadata.The functions do not modify the structs, which is enforced by the constqualifier.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix transaction abort on set received ioctl due to item overflowIf the set received ioctl fails due to an item overflow when attempting toadd the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transactionsince we did some metadata updates before.This means that if a user calls this ioctl with the same received UUIDfield for a lot of subvolumes, we will hit the overflow, trigger thetransaction abort and turn the filesystem into RO mode. A malicious usercould exploit this, and this ioctl does not even requires that a userhas admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.Fix this by doing an early check for item overflow before starting atransaction. This is also race safe because we are holding the subvol_semsemaphore in exclusive (write) mode.A test case for fstests will follow soon.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix bounds check in check_xattrs() to prevent out-of-bounds accessThe bounds check for the next xattr entry in check_xattrs() uses(void *)next >= end, which allows next to point within sizeof(u32)bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4bytes via *(__u32 *)(entry), which can overrun the valid xattr region.For example, if next lands at end - 1, the check passes sincenext < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,accessing 3 bytes beyond the valid region.Fix this by changing the check to (void *)next + sizeof(u32) > end,ensuring there is always enough space for the IS_LAST_ENTRY() readon the subsequent iteration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: reject zero shift in nft_bitwiseReject zero shift operands for nft_bitwise left and right shiftexpressions during initialization.The carry propagation logic computes the carry from the adjacent 32-bitword using BITS_PER_TYPE(u32) - shift. A zero shift operand turns thisinto a 32-bit shift, which is undefined behaviour.Reject zero shift operands in the control plane, alongside the existingcheck for values greater than or equal to 32, so malformed rules neverreach the packet path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: Add upper bound check for num_of_nodesdrm/amdkfd: Add upper bound check for num_of_nodesin kfd_ioctl_get_process_apertures_new.(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: iowarrior: fix use-after-free on disconnectSubmitted write URBs are not stopped on close() and therefore need to bestopped unconditionally on disconnect() to avoid use-after-free in thecompletion handler.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: An authenticated SSH client that repeatedly opened channels which were rejected by the server caused unbounded memory growth, eventually crashing the server process and affecting all connected users. Rejected channels are now properly removed from the connection's internal state and released for garbage collection.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited global responses are now discarded.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: add permission checks for FSCTL_DUPLICATE_EXTENTS_TO_FILEThe FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites thedestination file's data via vfs_clone_file_range() with neither theshare-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handlefp->daccess check that the other write-bearing arms carry. A client canoverwrite destination data on a read-only share, or from a handle openedwith only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data viathe clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix;require FILE_WRITE_DATA since this writes data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: When reading an HTTP response from a server, if no read amount is specified, the default behavior will be to use Content-Length. This allows a malicious server to cause the client to read large amounts of data into memory, potentially causing OOM or other DoS.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: A flaw was found in glib. This vulnerability allows a heap buffer overflow and denial-of-service (DoS) via an integer overflow in GLib's GIO (GLib Input/Output) escape_byte_string() function when processing malicious file or remote filesystem attribute values.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- glib2-tools > 0-0 (version in image is 2.78.6-150600.4.35.1).
Description: URI is a module providing classes to handle Uniform Resource Identifiers. In versions 0.12.4 and earlier (bundled in Ruby 3.2 series) 0.13.2 and earlier (bundled in Ruby 3.3 series), 1.0.3 and earlier (bundled in Ruby 3.4 series), when using the + operator to combine URIs, sensitive information like passwords from the original URI can be leaked, violating RFC3986 and making applications vulnerable to credential exposure. This is a a bypass for the fix to CVE-2025-27221 that can expose user credentials. This issue has been fixed in versions 0.12.5, 0.13.3 and 1.0.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- ruby > 0-0 (version in image is 2.5-1.21).
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In 0.9-rc2 and earlier, avahi-daemon can be crashed by sending unsolicited announcements containing CNAME resource records pointing it to resource records with short TTLs. As soon as they expire avahi-daemon crashes.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.18.1).
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In 0.9-rc2 and earlier, avahi-daemon can be crashed by sending 2 unsolicited announcements with CNAME resource records 2 seconds apart.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.18.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timerWhen advancing the target expiration for the guest's APIC timer in periodicmode, set the expiration to "now" if the target expiration is in the past(similar to what is done in update_target_expiration()). Blindly addingthe period to the previous target expiration can result in KVM generatinga practically unbounded number of hrtimer IRQs due to programming anexpired timer over and over. In extreme scenarios, e.g. if userspacepauses/suspends a VM for an extended duration, this can even cause hardlockups in the host.Currently, the bug only affects Intel CPUs when using the hypervisor timer(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,a.k.a. hrtimer, which KVM keeps running even on exits to userspace, theHV timer only runs while the guest is active. As a result, if the vCPUdoes not run for an extended duration, there will be a huge gap betweenthe target expiration and the current time the vCPU resumes running.Because the target expiration is incremented by only one period on eachtimer expiration, this leads to a series of timer expirations occurringrapidly after the vCPU/VM resumes.More critically, when the vCPU first triggers a periodic HV timerexpiration after resuming, advancing the expiration by only one periodwill result in a target expiration in the past. As a result, the deltamay be calculated as a negative value. When the delta is converted intoan absolute value (tscdeadline is an unsigned u64), the resulting valuecan overflow what the HV timer is capable of programming. I.e. the largevalue will exceed the VMX Preemption Timer's maximum bit width ofcpu_preemption_timer_multi + 32, and thus cause KVM to switch from theHV timer to the software timer (hrtimers).After switching to the software timer, periodic timer expiration callbacksmay be executed consecutively within a single clock interrupt handler,because hrtimers honors KVM's request for an expiration in the past andimmediately re-invokes KVM's callback after reprogramming. And becausethe interrupt handler runs with IRQs disabled, restarting KVM's hrtimerover and over until the target expiration is advanced to "now" can resultin a hard lockup.E.g. the following hard lockup was triggered in the host when running aWindows VM (only relevant because it used the APIC timer in periodic mode)after resuming the VM from a long suspend (in the host). NMI watchdog: Watchdog detected hard LOCKUP on cpu 45 ... RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm] ... RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046 RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500 RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0 R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0 R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8 FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0 PKRU: 55555554 Call Trace: apic_timer_fn+0x31/0x50 [kvm] __hrtimer_run_queues+0x100/0x280 hrtimer_interrupt+0x100/0x210 ? ttwu_do_wakeup+0x19/0x160 smp_apic_timer_interrupt+0x6a/0x130 apic_timer_interrupt+0xf/0x20 Moreover, if the suspend duration of the virtual machine is not long enoughto trigger a hard lockup in this scenario, since commit 98c25ead5eda("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVMwill continue using the software timer until the guest reprograms the APICtimer in some way. Since the periodic timer does not require frequent APICtimer register programming, the guest may continue to use the softwaretimer in ---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Fix bsg_done() causing double freeKernel panic observed on system,[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000[5353358.825194] #PF: supervisor write access in kernel mode[5353358.825195] #PF: error_code(0x0002) - not-present page[5353358.825196] PGD 100006067 P4D 0[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000[5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000[5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0[5353358.825221] PKRU: 55555554[5353358.825222] Call Trace:[5353358.825223] [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df[5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df[5353358.825232] ? sg_copy_buffer+0xc8/0x110[5353358.825236] ? __die_body.cold+0x8/0xd[5353358.825238] ? page_fault_oops+0x134/0x170[5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110[5353358.825244] ? exc_page_fault+0xa8/0x150[5353358.825247] ? asm_exc_page_fault+0x22/0x30[5353358.825252] ? memcpy_erms+0x6/0x10[5353358.825253] sg_copy_buffer+0xc8/0x110[5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx][5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]Most routines in qla_bsg.c call bsg_done() only for success cases.However a few invoke it for failure case as well leading to a doublefree. Validate before calling bsg_done().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in libssh. The API function `ssh_get_hexa()` is vulnerable to a denial of service when processing zero-length input. This can be exploited remotely by an attacker during GSSAPI (Generic Security Service Application Program Interface) authentication if the server's logging verbosity is set to `SSH_LOG_PACKET (3)` or higher. Successful exploitation could lead to a self-Denial of Service of the per-connection daemon process.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config > 0-0 (version in image is 0.9.8-150600.11.12.1).
Description: If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit.BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorithm (253), and in the algorithm identifier, improperly give a length longer than the actual identifier data. The invalid identifier will be stored. If BIND later needs to render that record to text, it will use the invalid length during processing, leading to a consistency check failing.This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.50-150600.3.32.1 (version in image is 9.18.33-150600.3.21.1).
Description: A stack-based buffer overflow was found in rpcbind's rpcinfo utility. When querying a remote rpcbind service with `rpcinfo -l`, address information returned by the server is copied into a fixed-size buffer without sufficient bounds checking. A malicious or compromised rpcbind server could use this flaw to crash the rpcinfo client, resulting in a denial of service. The highest threat from this vulnerability is to system availability.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- rpcbind > 0-0 (version in image is 0.2.3-5.9.2).
Description: A stack-based buffer overflow was found in rpcbind's rpcinfo utility. In rpcbdump() short mode (used by `rpcinfo -s`), version numbers from a remote RPCBPROC_DUMP reply are written into a fixed-size stack buffer without bounds checking. A user or administrator who runs `rpcinfo -s` against a malicious or compromised rpcbind endpoint could experience a crash or denial of service of the rpcinfo client.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- rpcbind > 0-0 (version in image is 0.2.3-5.9.2).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: replace overzealous BUG_ON in osdmap_apply_incremental()If the osdmap is (maliciously) corrupted such that the incrementalosdmap epoch is different from what is expected, there is no need toBUG. Instead, just declare the incremental osdmap to be invalid.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: return the handler error from mon_handle_auth_done()Currently any error from ceph_auth_handle_reply_done() is propagatedvia finish_auth() but isn't returned from mon_handle_auth_done(). Thisresults in higher layers learning that (despite the monitor consideringus to be successfully authenticated) something went wrong in theauthentication phase and reacting accordingly, but msgr2 still tryingto proceed with establishing the session in the background. In thecase of secure mode this can trigger a WARN in setup_crypto() and laterlead to a NULL pointer dereference inside of prepare_auth_signature().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: cap TX credit to local buffer sizeThe virtio transports derives its TX credit directly from peer_buf_alloc,which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.On the host side this means that the amount of data we are willing toqueue for a connection is scaled by a guest-chosen buffer size, ratherthan the host's own vsock configuration. A malicious guest can advertisea large buffer and read slowly, causing the host to allocate acorrespondingly large amount of sk_buff memory.The same thing would happen in the guest with a malicious host, sincevirtio transports share the same code base.Introduce a small helper, virtio_transport_tx_buf_size(), thatreturns min(peer_buf_alloc, buf_alloc), and use it wherever we consumepeer_buf_alloc.This ensures the effective TX window is bounded by both the peer'sadvertised buffer and our own buf_alloc (already clamped tobuffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peercannot force the other to queue more data than allowed by its ownvsock settings.On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with32 guest vsock connections advertising 2 GiB each and reading slowlydrove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system onlyrecovered after killing the QEMU process. That said, if QEMU memory islimited with cgroups, the maximum memory used will be limited.With this patch applied: Before: MemFree: ~61.6 GiB Slab: ~142 MiB SUnreclaim: ~117 MiB After 32 high-credit connections: MemFree: ~61.5 GiB Slab: ~178 MiB SUnreclaim: ~152 MiBOnly ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guestremains responsive.Compatibility with non-virtio transports: - VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per socket based on the local vsk->buffer_* values; the remote side cannot enlarge those queues beyond what the local endpoint configured. - Hyper-V's vsock transport uses fixed-size VMBus ring buffers and an MTU bound; there is no peer-controlled credit field comparable to peer_buf_alloc, and the remote endpoint cannot drive in-flight kernel memory above those ring sizes. - The loopback path reuses virtio_transport_common.c, so it naturally follows the same semantics as the virtio transport.This change is limited to virtio_transport_common.c and thus affectsvirtio-vsock, vhost-vsock, and loopback, bringing them in line with the"remote window intersected with local policy" behaviour that VMCI andHyper-V already effectively have.[Stefano: small adjustments after changing the previous patch][Stefano: tweak the commit message]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: fix UAF in xchk_btree_check_block_ownerWe cannot dereference bs->cur when trying to determine if bs->curaliases bs->sc->sa.{bno,rmap}_cur after the latter has been freed.Fix this by sampling before type before any freeing could happen.The correct temporal ordering was broken when we removed xfs_btnum_t.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: add xmit recursion limit to tunnel xmit functionsTunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their ownrecursion limit. When a bond device in broadcast mode has GRE tapinterfaces as slaves, and those GRE tunnels route back through thebond, multicast/broadcast traffic triggers infinite recursion betweenbond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causingkernel stack overflow.The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is notsufficient because tunnel recursion involves route lookups and full IPoutput, consuming much more stack per level. Use a lower limit of 4(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.Add recursion detection using dev_xmit_recursion helpers directly iniptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnelpaths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).Move dev_xmit_recursion helpers from net/core/dev.h to public headerinclude/linux/netdevice.h so they can be used by tunnel code. BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160 Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11 Workqueue: mld mld_ifc_work Call Trace: __build_flow_key.constprop.0 (net/ipv4/route.c:515) ip_rt_update_pmtu (net/ipv4/route.c:1073) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) mld_sendpack mld_ifc_work process_one_work worker_thread
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferencedat lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);The mesh_matches_local() check above only validates the Mesh ID,Mesh Configuration, and Supported Rates IEs. It does not verify thepresence of the Mesh Channel Switch Parameters IE (element ID 118).When a received CSA action frame omits that IE, ieee802_11_parse_elems()leaves elems->mesh_chansw_params_ie as NULL, and the unconditionaldereference causes a kernel NULL pointer dereference.A remote mesh peer with an established peer link (PLINK_ESTAB) cantrigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action framethat includes a matching Mesh ID and Mesh Configuration IE but omits theMesh Channel Switch Parameters IE. No authentication beyond the defaultopen mesh peering is required.Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000Fix by adding a NULL check for mesh_chansw_params_ie aftermesh_matches_local() returns, consistent with how other optional IEsare guarded throughout the mesh code.The bug has been present since v3.13 (released 2014-01-19).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQCurrently the code attempts to accept requests regardless of thecommand identifier which may cause multiple requests to be markedas pending (FLAG_DEFER_SETUP) which can cause more thanL2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defercausing an overflow.The spec is quite clear that the same identifier shall not be used onsubsequent requests:'Within each signaling channel a different Identifier shall be usedfor each successive request or indication.'https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355dSo this attempts to check if there are any channels pending with thesame identifier and rejects if any are found.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: fix NULL deref in mesh_matches_local()mesh_matches_local() unconditionally dereferences ie->mesh_config tocompare mesh configuration parameters. When called frommesh_rx_csa_frame(), the parsed action-frame elements may not contain aMesh Configuration IE, leaving ie->mesh_config NULL and triggering akernel NULL pointer dereference.The other two callers are already safe: - ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before calling mesh_matches_local() - mesh_plink_get_event() is only reached through mesh_process_plink_frame(), which checks !elems->mesh_config, toomesh_rx_csa_frame() is the only caller that passes raw parsed elementsto mesh_matches_local() without guarding mesh_config. An adjacentattacker can exploit this by sending a crafted CSA action frame thatincludes a valid Mesh ID IE but omits the Mesh Configuration IE,crashing the kernel.The captured crash log:Oops: general protection fault, probably for non-canonical address ...KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]Workqueue: events_unbound cfg80211_wiphy_work[...]Call Trace: ? __pfx_mesh_matches_local (net/mac80211/mesh.c:65) ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686) [...] ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802) [...] cfg80211_wiphy_work (net/wireless/core.c:426) process_one_work (net/kernel/workqueue.c:3280) ? assign_work (net/kernel/workqueue.c:1219) worker_thread (net/kernel/workqueue.c:3352) ? __pfx_worker_thread (net/kernel/workqueue.c:3385) kthread (net/kernel/kthread.c:436) [...] ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255) This patch adds a NULL check for ie->mesh_config at the top ofmesh_matches_local() to return false early when the Mesh ConfigurationIE is absent.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTEWhen installing an emulated MMIO SPTE, do so *after* dropping/zapping theexisting SPTE (if it's shadow-present). While commit a54aa15c6bda3 wasright about it being impossible to convert a shadow-present SPTE to anMMIO SPTE due to a _guest_ write, it failed to account for writes to guestmemory that are outside the scope of KVM.E.g. if host userspace modifies a shadowed gPTE to switch from a memslotto emulted MMIO and then the guest hits a relevant page fault, KVM willinstall the MMIO SPTE without first zapping the shadow-present SPTE. ------------[ cut here ]------------ is_shadow_present_pte(*sptep) WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292 Modules linked in: kvm_intel kvm irqbypass CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm] Call Trace: mmu_set_spte+0x237/0x440 [kvm] ept_page_fault+0x535/0x7f0 [kvm] kvm_mmu_do_page_fault+0xee/0x1f0 [kvm] kvm_mmu_page_fault+0x8d/0x620 [kvm] vmx_handle_exit+0x18c/0x5a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0x730 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47fa3f ---[ end trace 0000000000000000 ]---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: add NULL checks for idev in SRv6 paths__in6_dev_get() can return NULL when the device has no IPv6 configuration(e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER).Add NULL checks for idev returned by __in6_dev_get() in bothseg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULLpointer dereferences.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions 0.9rc2 and below, avahi-daemon can be crashed via a segmentation fault by sending an unsolicited mDNS response containing a recursive CNAME record, where the alias and canonical name point to the same domain (e.g., "h.local" as a CNAME for "h.local"). This causes unbounded recursion in the lookup_handle_cname function, leading to stack exhaustion. The vulnerability affects record browsers where AVAHI_LOOKUP_USE_MULTICAST is set explicitly, which includes record browsers created by resolvers used by nss-mdns. This issue is patched in commit 78eab31128479f06e30beb8c1cbf99dd921e2524.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.18.1).
Description: In libexpat before 2.7.4, the doContent function does not properly determine the buffer size bufSize because there is no integer overflow check for tag buffer reallocation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loopl2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTEDstate to support L2CAP reconfiguration (e.g. MTU changes). However,since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set fromthe initial configuration, the reconfiguration path falls through tol2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, andretrans_list without freeing the previous allocations and setschan->sdu to NULL without freeing the existing skb. This leaks allpreviously allocated ERTM resources.Additionally, l2cap_parse_conf_req() does not validate the minimumvalue of remote_mps derived from the RFC max_pdu_size option. A zerovalue propagates to l2cap_segment_sdu() where pdu_len becomes zero,causing the while loop to never terminate since len is neverdecremented, exhausting all available memory.Fix the double-init by skipping l2cap_ertm_init() andl2cap_chan_ready() when the channel is already in BT_CONNECTED state,while still allowing the reconfiguration parameters to be updatedthrough l2cap_parse_conf_req(). Also add a pdu_len zero check inl2cap_segment_sdu() as a safeguard.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: reject oversized global TT response buffersbatadv_tt_prepare_tvlv_global_data() builds the allocation length for aglobal TT response in 16-bit temporaries. When a remote originatoradvertises a large enough global TT, the TT payload length plus the VLANheader offset can exceed 65535 and wrap before kmalloc().The full-table response path still uses the original TT payload length whenit fills tt_change, so the wrapped allocation is too small andbatadv_tt_prepare_tvlv_global_data() writes past the end of the heap objectbefore the later packet-size check runs.Fix this by rejecting TT responses whose TVLV value length cannot fit inthe 16-bit TVLV payload length field.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: act_csum: validate nested VLAN headerstcf_csum_act() walks nested VLAN headers directly from skb->data when anskb still carries in-payload VLAN tags. The current code readsvlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes withoutfirst ensuring that the full VLAN header is present in the linear area.If only part of an inner VLAN header is linearized, accessingh_vlan_encapsulated_proto reads past the linear area, and the followingskb_pull(VLAN_HLEN) may violate skb invariants.Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing andpulling each nested VLAN header. If the header still is not fullyavailable, drop the packet through the existing error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: some missing initializations on replayIn several places in the code, we have a label to signifythe start of the code where a request can be replayed ifnecessary. However, some of these places were missing thenecessary reinitializations of certain local variablesbefore replay.This change makes sure that these variables get initializedafter the label.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes - all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: Issue summary: An attacker-controlled CMP (Certificate Management Protocol)server could trigger a NULL pointer dereference in a CMP client application.Impact summary: A NULL pointer dereference causes a crash of theapplication and a Denial of Service.An attacker controlling a CMP server (or acting as a man-in-the-middle) couldcraft a CMP response containing a CRMF (Certificate Request Message Format)CertRepMessage with an EncryptedValue structure where the symmAlg fieldhas an algorithm OID but no parameters field. When the OpenSSL CMP clientprocesses this response, the NULL dereference occurs, causing a crash ofthe CMP client.Applications that process untrusted CMP/CRMF messages may be affected.The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by thisissue, as the affected code is outside the OpenSSL FIPS module boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libopenssl3 < 3.1.4-150600.5.56.1 (version in image is 3.1.4-150600.5.53.1).
Description: etcd is a distributed key-value store for the data of a distributed system. Prior to 3.4.44, 3.5.30, and 3.6.11, a vulnerability in etcd allows read access via PrevKv, or lease attachment in Put requests within transaction operations, to bypass RBAC authorization checks. An authenticated user without sufficient read or lease-related permissions may be able to access unauthorized data or attach leases by invoking transaction operations with these features enabled. This vulnerability is fixed in 3.4.44, 3.5.30, and 3.6.11.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: A path traversal in handling the "path" component of .repo files processed by libzypp before 17.38.13 in the 17.x series, or before 16.22.19 could be used by attackers to fill directories on the system outside of the zypp cache with content.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsolv-tools-base < 0.7.39-150600.8.24.1 (version in image is 0.7.34-150600.8.19.2).
Description: In the Linux kernel, the following vulnerability has been resolved:openvswitch: cap upcall PID array size and pre-size vport repliesThe vport netlink reply helpers allocate a fixed-size skb withnlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PIDarray via ovs_vport_get_upcall_portids(). Sinceovs_vport_set_upcall_portids() accepts any non-zero multiple ofsizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PIDarray large enough to overflow the reply buffer, causing nla_put() tofail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems withunprivileged user namespaces enabled (e.g., Ubuntu default), this isreachable via unshare -Urn since OVS vport mutation operations useGENL_UNS_ADMIN_PERM. kernel BUG at net/openvswitch/datapath.c:2414! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1 RIP: 0010:ovs_vport_cmd_set+0x34c/0x400 Call Trace: genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116) genl_rcv_msg (net/netlink/genetlink.c:1194) netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Kernel panic - not syncing: Fatal exceptionReject attempts to set more PIDs than nr_cpu_ids inovs_vport_set_upcall_portids(), and pre-compute the worst-case replysize in ovs_vport_cmd_msg_size() based on that bound, similar to theexisting ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap alreadyused by the per-CPU dispatch configuration on the datapath side(ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so thetwo sides stay consistent.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:slip: reject VJ receive packets on instances with no rstate arrayslhc_init() accepts rslots == 0 as a valid configuration, with thedocumented meaning of 'no receive compression'. In that case theallocation loop in slhc_init() is skipped, so comp->rstate staysNULL and comp->rslot_limit stays 0 (from the kzalloc of structslcompress).The receive helpers do not defend against that configuration.slhc_uncompress() dereferences comp->rstate[x] when the VJ headercarries an explicit connection ID, and slhc_remember() later assignscs = &comp->rstate[...] after only comparing the packet's slot numberto comp->rslot_limit. Because rslot_limit is 0, slot 0 passes therange check, and the code dereferences a NULL rstate.The configuration is reachable in-tree through PPP. PPPIOCSMAXCIDstores its argument in a signed int, and (val >> 16) uses arithmeticshift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole pathis reachable from an unprivileged user namespace. Once the malformedVJ state is installed, any inbound VJ-compressed or VJ-uncompressedframe that selects slot 0 crashes the kernel in softirq context: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519) Call Trace: ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466) ppp_input (drivers/net/ppp/ppp_generic.c:2359) ppp_async_process (drivers/net/ppp/ppp_async.c:492) tasklet_action_common (kernel/softirq.c:926) handle_softirqs (kernel/softirq.c:623) run_ksoftirqd (kernel/softirq.c:1055) smpboot_thread_fn (kernel/smpboot.c:160) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) Reject the receive side on such instances instead of touching rstate.slhc_uncompress() falls through to its existing 'bad' label, whichbumps sls_i_error and enters the toss state. slhc_remember() mirrorsthat with an explicit sls_i_error increment followed by slhc_toss();the sls_i_runt counter is not used here because a missing rstate isan internal configuration state, not a runt packet.The transmit path is unaffected: the only in-tree caller that picksrslots from userspace (ppp_generic.c) still supplies tslots >= 1, andslip.c always calls slhc_init(16, 16), so comp->tstate remains validand slhc_compress() continues to work.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: arp_tables: fix IEEE1394 ARP payload parsingWeiming Shi says:"arp_packet_match() unconditionally parses the ARP payload assuming twohardware addresses are present (source and target). However,IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware addressfield, and arp_hdr_len() already accounts for this by returning ashorter length for ARPHRD_IEEE1394 devices.As a result, on IEEE1394 interfaces arp_packet_match() advances past anonexistent target hardware address and reads the wrong bytes for boththe target device address comparison and the target IP address. Thiscauses arptables rules to match against garbage data, leading toincorrect filtering decisions: packets that should be accepted may bedropped and vice versa.The ARP stack in net/ipv4/arp.c (arp_create and arp_process) alreadyhandles this correctly by skipping the target hardware address forARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()."Mangle the original patch to always return 0 (no match) in case usermatches on the target hardware address which is never present inIEEE1394.Note that this returns 0 (no match) for either normal and inverse matchbecause matching in the target hardware address in ARPHRD_IEEE1394 hasnever been supported by arptables. This is intentional, matching on thetarget hardware address should never evaluate true for ARPHRD_IEEE1394.Moreover, adjust arpt_mangle to drop the packet too as AI suggests:In arpt_mangle, the logic assumes a standard ARP layout. BecauseIEEE1394 (FireWire) omits the target hardware address, the linearpointer arithmetic miscalculates the offset for the target IP address.This causes mangling operations to write to the wrong location, leadingto packet corruption. To ensure safety, this patch drops packets(NF_DROP) when mangling is requested for these fields on IEEE1394devices, as the current implementation cannot correctly map the FireWireARP payload.This omits both mangling target hardware and IP address. Even if IPaddress mangling should be possible in IEEE1394, this would requireto adjust arpt_mangle offset calculation, which has never beensupported.Based on patch from Weiming Shi .
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Flush cache for PASID table before using itWhen writing the address of a freshly allocated zero-initialized PASIDtable to a PASID directory entry, do that after the CPU cache flush forthis PASID table, not before it, to avoid the time window when thisPASID table may be already used by non-coherent IOMMU hardware whileits contents in RAM is still some random old data, not zero-initialized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:SUNRPC: auth_gss: fix memory leaks in XDR decoding error pathsThe gssx_dec_ctx(), gssx_dec_status(), and gssx_dec_name()functions allocate memory via gssx_dec_buffer(), which callskmemdup(). When a subsequent decode operation fails, thesefunctions return immediately without freeing previouslyallocated buffers, causing memory leaks.The leak in gssx_dec_ctx() is particularly relevant becausethe caller (gssp_accept_sec_context_upcall) initializes severalbuffer length fields to non-zero values, resulting in memoryallocation: struct gssx_ctx rctxh = { .exported_context_token.len = GSSX_max_output_handle_sz, .mech.len = GSS_OID_MAX_LEN, .src_name.display_name.len = GSSX_max_princ_sz, .targ_name.display_name.len = GSSX_max_princ_sz };If, for example, gssx_dec_name() succeeds for src_name butfails for targ_name, the memory allocated forexported_context_token, mech, and src_name.display_nameremains unreferenced and cannot be reclaimed.Add error handling with goto-based cleanup to free anypreviously allocated buffers before returning an error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xen-netback: reject zero-queue configuration from guestA malicious or buggy Xen guest can write "0" to the xenbus key"multi-queue-num-queues". The connect() function in the backend onlyvalidates the upper bound (requested_num_queues > xenvif_max_queues)but not zero, allowing requested_num_queues=0 to reachvzalloc(array_size(0, sizeof(struct xenvif_queue))), which triggersWARN_ON_ONCE(!size) in __vmalloc_node_range().On systems with panic_on_warn=1, this allows a guest-to-host denialof service.The Xen network interface specification requiresthe queue count to be "greater than zero".Add a zero check to match the validation already presentin xen-blkback, which has included thisguard since its multi-queue support was added.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for bothprotocol and result, this is currently not treated as an error. In caseof ac->negotiating == true and ac->protocol > 0, this leads to settingac->protocol = 0 and ac->ops = NULL. Thereafter, the check forac->protocol != protocol returns false, and init_protocol() is notcalled. Subsequently, ac->ops->handle_reply() is called, which leads toa null pointer dereference, because ac->ops is still NULL.This patch changes the check for ac->protocol != protocol to!ac->protocol, as this also includes the case when the protocol was setto zero in the message. This causes the message to be treated ascontaining a bad auth protocol.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evthci_le_create_big_complete_evt() iterates over BT_BOUND connections fora BIG handle using a while loop, accessing ev->bis_handle[i++] on eachiteration. However, there is no check that i stays within ev->num_bisbefore the array access.When a controller sends a LE_Create_BIG_Complete event with fewerbis_handle entries than there are BT_BOUND connections for that BIG,or with num_bis=0, the loop reads beyond the valid bis_handle[] flexarray into adjacent heap memory. Since the out-of-bounds valuestypically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()rejects them and the connection remains in BT_BOUND state. The sameconnection is then found again by hci_conn_hash_lookup_big_state(),creating an infinite loop with hci_dev_lock held.Fix this by terminating the BIG if in case not all BIS could be setupproperly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: fix uninit-value by validating catalog record sizeSyzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). Theroot cause is that hfs_brec_read() doesn't validate that the on-diskrecord size matches the expected size for the record type being read.When mounting a corrupted filesystem, hfs_brec_read() may read less datathan expected. For example, when reading a catalog thread record, thedebug output showed: HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26 HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!hfs_brec_read() only validates that entrylength is not greater than thebuffer size, but doesn't check if it's less than expected. It successfullyreads 26 bytes into a 520-byte structure and returns success, leaving 494bytes uninitialized.This uninitialized data in tmp.thread.nodeName then gets copied byhfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggeringthe KMSAN warning when the uninitialized bytes are used as array indicesin case_fold().Fix by introducing hfsplus_brec_read_cat() wrapper that:1. Calls hfs_brec_read() to read the data2. Validates the record size based on the type field: - Fixed size for folder and file records - Variable size for thread records (depends on string length)3. Returns -EIO if size doesn't match expectedFor thread records, check against HFSPLUS_MIN_THREAD_SZ before readingnodeName.length to avoid reading uninitialized data at call sites thatdon't zero-initialize the entry structure.Also initialize the tmp variable in hfsplus_find_cat() as defensiveprogramming to ensure no uninitialized data even if validation isbypassed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: bla: put backbone reference on failed claim hash insertWhen batadv_bla_add_claim() fails to insert a new claim into the hash, itleaked a reference to the backbone_gw for which the claim was intended.Call batadv_backbone_gw_put() on the error path to release the referenceand avoid leaking the backbone_gw object.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:apparmor: fix rlimit for posix cpu timersPosix cpu timers requires an additional step beyond setting the rlimit.Refactor the code so its clear when what code is setting thelimit and conditionally update the posix cpu timers when appropriate.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: handle rbtree insertion error in decode_choose_args()A message of type CEPH_MSG_OSD_MAP contains an OSD map that itselfcontains a CRUSH map. The received CRUSH map may optionally containchoose_args that get decoded in decode_choose_args(). In this function,num_choose_arg_maps is read from the message, and a corresponding numberof crush_choose_arg_maps gets decoded afterwards. Eachcrush_choose_arg_map has a choose_args_index, which serves as the keywhen inserting it into the choose_args rbtree of the decoded crush_map.If a (potentially corrupted) message contains two crush_choose_arg_mapswith the same index, the assertion in insert_choose_arg_map() triggers akernel BUG when trying to insert the second crush_choose_arg_map.This patch fixes the issue by switching to the non-asserting rbtreeinsertion function and rejecting the message if the insertion fails.[ idryomov: changelog ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb/client: fix possible infinite loop and oob read in symlink_data()On 32-bit architectures, the infinite loop is as follows: len = p->ErrorDataLength == 0xfffffff8 u8 *next = p->ErrorContextData + len next == pOn 32-bit architectures, the out-of-bounds read is as follows: len = p->ErrorDataLength == 0xfffffff0 u8 *next = p->ErrorContextData + len next == (u8 *)p - 8
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mvpp2: sync RX data at the hardware packet offsetmvpp2 programs the RX queue packet offset, so hardware writes receiveddata at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts atdma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs theunused headroom and misses the same number of bytes at the packet tail.On non-coherent DMA systems this can leave the CPU reading stale cachecontents for the end of the received frame.Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the rangeoffset so the sync covers the Marvell header and packet data actuallywritten by hardware.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: RFCOMM: validate skb length in MCC handlersThe RFCOMM MCC handlers cast skb->data to protocol-specific structswithout validating skb->len first. A malicious remote device can sendtruncated MCC frames and trigger out-of-bounds reads in these handlers.Fix this by using skb_pull_data() to validate and access the requireddata before dereferencing it.rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows1-byte RPN requests. Handle this by validating only the DLCI byte first,and validating the full struct only when len > 1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: mcast: Fix use-after-free when processing MLD queriesWhen processing an MLD query, a pointer to the multicast group addressis retrieved when initially parsing the packet. This pointer is laterdereferenced without being reloaded despite the fact that the skb headermight have been reallocated following the pskb_may_pull() calls, leadingto a use-after-free [1].Fix by copying the multicast group address when the packet is initiallyparsed.[1]BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118Workqueue: mld mld_query_workCall Trace:dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)print_address_description.constprop.0 (mm/kasan/report.c:378)print_report (mm/kasan/report.c:482)kasan_report (mm/kasan/report.c:595)__mld_query_work (net/ipv6/mcast.c:1512)mld_query_work (net/ipv6/mcast.c:1563)process_one_work (kernel/workqueue.c:3314)worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)kthread (kernel/kthread.c:436)ret_from_fork (arch/x86/kernel/process.c:158)ret_from_fork_asm (arch/x86/entry/entry_64.S:245)[...]Freed by task 118:kasan_save_stack (mm/kasan/common.c:57)kasan_save_track (mm/kasan/common.c:78)kasan_save_free_info (mm/kasan/generic.c:584)__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)pskb_expand_head (net/core/skbuff.c:2335)__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))mld_query_work (net/ipv6/mcast.c:1563)process_one_work (kernel/workqueue.c:3314)worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)kthread (kernel/kthread.c:436)ret_from_fork (arch/x86/kernel/process.c:158)ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: rds: clear i_sends on setup unwindThe RDS IB connection teardown path is written so it can run duringpartial startup and on repeated shutdown attempts. It uses NULLpointers to distinguish resources that are still owned from resourcesthat have already been released.When rds_ib_setup_qp() fails after allocating i_sends but beforeallocating i_recvs, the sends_out path frees i_sends without clearingthe pointer. A later shutdown pass can still treat that stale pointeras a live send ring allocation.Clear i_sends after vfree() in the error unwind path so the existingshutdown logic continues to use the correct ownership state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFSv4/flexfiles: reject zero filehandle version countff_layout_alloc_lseg() decodes the filehandle-version array countfrom the flexfiles layout body. The value is used as the count forkzalloc_objs(), and the current code only rejects NULL.A zero count yields ZERO_SIZE_PTR, which can be stored indss_info->fh_versions even though later flexfiles paths assume that atleast one filehandle version exists.Reject fh_count == 0 before the allocation, matching the existing zeroversion_count validation in the flexfiles GETDEVICEINFO parser.A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exceptionThe patched kernel rejects the malformed layout without KASAN/oops/panic,and a valid fh_count=1 regression still opens, reads, and unmounts cleanly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfsd: fix posix_acl leak on SETACL decode failurenfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() eachcall nfs_stream_decode_acl() twice, first for NFS_ACL and then forNFS_DFACL. Each successful call transfers ownership of a freshlyallocated posix_acl into argp->acl_access or argp->acl_default. Ifthe first call succeeds but the second fails, the decoder returnsfalse and argp->acl_access is left dangling.ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat andACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle.Both only call fh_put() and have no knowledge of the ACL fields onargp. The posix_acl_release() pairs sat at the out: labels insidenfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process()skips pc_func when pc_decode returns false, so that cleanup isunreachable on decode failure: svc_process_common() pc_decode() /* decode_setaclargs: false */ /* pc_func skipped */ pc_release() /* fh_put only -- ACLs leaked */The orphaned posix_acl is leaked for the lifetime of the server.Fix by adding nfsaclsvc_release_setacl() and nfs3svc_release_setacl(),which release both argp->acl_access and argp->acl_default in additionto fh_put(), and wiring them as pc_release for their respective SETACLprocedures. pc_release runs on every path svc_process() takes afterdecode, including decode failure, so the posix_acl_release() pairs areremoved from the proc functions' out: labels to keep ownership in oneplace. This matches the existing release_getacl() pattern used bythe sibling GETACL procedures.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfsd: release layout stid on setlease failurenfs4_alloc_stid() publishes the new stid into cl->cl_stateids viaidr_alloc_cyclic() under cl_lock before returning tonfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() thenfails, the error path frees the layout stateid directly withkmem_cache_free() without ever calling idr_remove(), leaving theIDR slot pointing at freed slab memory. Any subsequent IDR walker(states_show, client teardown) dereferences the dangling pointer.The correct teardown for an IDR-published stid is nfs4_put_stid(),which removes the IDR slot under cl_lock, dispatches sc_free(nfsd4_free_layout_stateid) to release ls->ls_file vianfsd4_close_layout(), and drops the nfs4_file reference in itstail.A second issue blocks that switch: nfsd4_free_layout_stateid()unconditionally inspects ls->ls_fence_work viadelayed_work_pending() under ls_lock, butINIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs onlyafter the setlease call. On the setlease-failure path thedestructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file()Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORKinitialization above the nfsd4_layout_setlease() call, and replacethe manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanupwith a single nfs4_put_stid(stp).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri's CRuby native extension could leave a Ruby wrapper pointing to freed memory when replacing the value of an XML attribute. If Ruby code had already accessed an attribute child node, Nokogiri::XML::Attr#value= could free the underlying native child node while the wrapper remained reachable through the document node cache. A later use of the freed child node or a Ruby GC mark could dereference an invalid pointer, causing an invalid read and a possible segfault. This vulnerability is fixed in 1.19.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- ruby2.5-rubygem-nokogiri > 0-0 (version in image is 1.8.5-150400.14.6.1).
Description: Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- ruby2.5-rubygem-nokogiri > 0-0 (version in image is 1.8.5-150400.14.6.1).
Description: A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config < 0.9.8-150600.11.15.1 (version in image is 0.9.8-150600.11.12.1).
Description: A flaw was found in libssh. A remote authenticated client can issue SSH_FXP_READ requests with an arbitrarily large length, causing a libssh SFTP server to allocate excessive memory and potentially exhaust it through repeated requests.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config < 0.9.8-150600.11.15.1 (version in image is 0.9.8-150600.11.12.1).
Description: A flaw was found in libssh. When ProxyCommand is used, an unchecked fork() failure can be stored as process ID -1; during cleanup, signals may then be sent across the caller's accessible process tree, leading to local denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config < 0.9.8-150600.11.15.1 (version in image is 0.9.8-150600.11.12.1).
Description: A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config < 0.9.8-150600.11.15.1 (version in image is 0.9.8-150600.11.12.1).
Description: sshd in OpenSSH before 10.4 does not always honor the minimum authentication delay.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tp_meter: restrict number of unacked list entriesWhen the unacked_list is unbound, an attacker could send messages withsmall lengths and appropriated seqno + gaps to force the receiver toallocate more and more unacked_list entries. And the end either causing anout-of-memory situation or increase the management overhead for the (large)list that significant portions of CPU cycles are wasted in searchingthrough the list.When limiting the list to a specific number, it is important to stillcorrectly add a new entry to the list. But if the list became larger thanthe limit, the last entry of the list (with the highest seqno) must bedropped to still allow the earlier seqnos to finish and therefore tocontinue the process. Otherwise, the process might get stuck with too highseqnos which are not handled by batadv_tp_ack_unordered().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tp_meter: avoid divide-by-zero for dec_cwndThe cwnd is always MSS <= cwnd <= 0x20000000. But the calculation inbatadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8)In case cwnd is actually 0x20000000, it will be shifted by 3 bit to theleft end up at 0x100000000 or U32_MAX + 1. It will therefore wrap aroundand be 0 - resulting in: ((mss * 8) ** 2) / 0This is of course invalid and cannot be calculated. The calculation shouldmust be simplified to avoid this overflow: (mss ** 2) * 8 / cwndIt will keep the precision enhancement from the scaling (by 8) but avoidthe overflow in the divisor.In theory, there could still be an overflow in the dividend. It is at themoment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not animminent problem. But allowing it to use the whole u32 bit range, wouldmean that it can still use up to 67 bits. To keep this calculation safe for32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits -or in other words: must never be larger than 16383.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32An adjacent Fibre Channel fabric actor that can deliver an FPIN ELSframe to an lpfc or qla2xxx Linux initiator can trigger a non-return inthe generic FC transport. This is not a local userspace or IP networkpath; the attacker must be able to inject fabric traffic, for example asa compromised switch or fabric controller, or as a same-zone N_Port on afabric that permits source spoofing.The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loopcounter against the 32-bit on-wire pname_count field, and did not boundpname_count by the descriptor body already validated by the TLV walker.A pname_count of 256 therefore wraps the counter and keeps the loopcondition true indefinitely.Factor the shared pname_list[] walk into one helper, widen the counterto u32, and clamp pname_count against the entries that fit in thedescriptor body before iterating.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walkerdrivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced thedescriptor cursor by an attacker-supplied fip_dlen without everrequiring dlen >= sizeof(struct fip_desc) in the default branch. Thenamed descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checkedtheir per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor(fip_dtype >= 128, which the standard requires receivers to silentlyignore) skipped that check entirely.An unauthenticated L2 peer on the FCoE control VLAN could hangfcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitelyby emitting one FIP CVL frame whose single descriptor had fip_dtype ==FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytesper iteration and the loop condition rlen >= sizeof(*desc) stayed trueforever, blocking every subsequent FIP frame on that controller.Tighten the outer dlen guard to also reject dlen < sizeof(structfip_desc), so a malformed descriptor whose length cannot even cover thedescriptor header is rejected before the switch. This is the samelower-bound the named cases already apply and is the minimum scope thatcloses the loop.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: hci: fix out-of-bounds read in HCP header parsingBoth nfc_hci_recv_from_llc() and nci_hci_data_received_cb() readpacket->header from skb->data at function entry without first checkingthat the buffer holds at least one byte. A malicious NFC peer can senda 0-byte HCP frame that passes through the SHDLC layer and reachesthese functions, causing an out-of-bounds heap read of packet->header.The same 0-byte frame, if queued as a non-final fragment, also causesthe reassembly loop to underflow msg_len to UINT_MAX, triggeringskb_over_panic() when the reassembled skb is written.Fix this by adding a pskb_may_pull() check at the entry of eachfunction before packet->header is first accessed. The existingpskb_may_pull() checks before the reassembled hcp_skb is cast tostruct hcp_packet remain in place to guard the 2-byte HCP messageheader.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration successl2cap_ecred_reconf_rsp() returns early on success without clearingchan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after asuccessful transaction to prevent the channel from matching subsequentresponses with the recycled ident value.A remote attacker that completed a reconfiguration as the peer canreplay a failure response with the stale ident, causing the kernel tomatch and destroy the already-established channel vial2cap_chan_del(chan, ECONNRESET).Clear chan->ident for all matching channels on success, and harden thefailure path by using l2cap_chan_hold_unless_zero() consistent withother L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: cortina: Carry over frag counterThe gmac_rx() NAPI poll function assembles packets in anSKB from a ring buffer.If the ring buffer gets completely emptied during a poll cycle,we exit gmac_rx(), but the packet is not yet completelyassembled in the SKB, yet the fragment counter frag_nr isreset to zero on the next invocation.Solve this by making the RX fragment counter a part of theport struct, and carry it over between invocations.Reset the fragment counter only right after callingnapi_gro_frags(), on error (after calling napi_free_frags())or if stopping the port.Reset it in some place where not strictly necessary just toemphasize what is going on.This was found by Sashiko during normal patch review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tt: fix negative tt_buff_lenbatadv_orig_node::tt_buff_len was declared as s16, but the field is neverintended to hold a negative value. When a value greater than 32767 isassigned, it wraps to a negative signed integer.In batadv_send_other_tt_response(), tt_buff_len is temporarily widened tos32. The incorrectly negative s16 value propagates into the s32, causingbatadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer butpopulates only a small portion of it with the collected changeset. Allremaining bits are kept uninitialized.Using an u16 avoids this type confusion and ensures that no (negative) signextension is performed in batadv_send_other_tt_response().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tt: fix negative last_changeset_lenbatadv_piv_tt::last_changeset_len len was declared as s16, but the field isnever intended to hold a negative value. When a value greater than 32767 isassigned, it wraps to a negative signed integer.In batadv_send_my_tt_response(), last_changeset_len is temporarily widenedto s32. The incorrectly negative s16 value propagates into the s32, causingbatadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer butpopulates only a small portion of it with the collected changeset. Allremaining bits are kept uninitialized.Using an u16 avoids this type confusion and ensures that no (negative) signextension is performed in batadv_send_my_tt_response().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/siw: Reject MPA FPDU length underflow before signed receive mathA malicious connected siw peer can send an iWARP FPDU whose MPA lengthfield (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smallerthan the fixed DDP/RDMAP header for the announced opcode. Soft-iWARPparses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode].hdr_len, but never compares mpa_len against that header length.siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE;where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at thispoint. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smalleston-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len belowhdr_len - MPA_HDR_SIZE underflows to a negative int.The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new);is handed to siw_check_mem() as an int len (whose interval checkaddr + len > mem->va + mem->len is satisfied for a valid base whenlen is negative), and reaches siw_rx_data() -> siw_rx_kva() /siw_rx_umem() -> skb_copy_bits() as a signed copy length. The headercopy branch in skb_copy_bits() promotes that to size_t, producing amulti-gigabyte read.KASAN under a KUnit harness that drives the real kernel TCP receivepath -- a loopback AF_INET socketpair, the malformed FPDU written viakernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sockdispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queueAdd the missing invariant at the earliest point where the peer headeris fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactlythe value the siw transmitter uses as the minimum mpa_len for eachopcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches theprotocol contract. Out-of-range FPDUs terminate the connection withTERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- whichis RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fieldsdo not agree on the start of an FPDU"), the correct framing-errorclass for this inconsistency.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: validate NTLMv2 response before updating session keyksmbd_auth_ntlmv2() derives the NTLMv2 session key intosess->sess_key before it verifies the NTLMv2 response.ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH evenwhen ksmbd_auth_ntlmv2() failed.With SMB3 multichannel binding, the failed authentication operates onan existing session and the session setup error path does not expirebinding sessions. A client can send a binding session setup with abad NT proof and KEY_XCH and still modify sess->sess_key beforeSTATUS_LOGON_FAILURE is returned.Relevant path: smb2_sess_setup() -> conn->binding = true -> ntlm_authenticate() -> session_user() -> ksmbd_decode_ntlmssp_auth_blob() -> ksmbd_auth_ntlmv2() -> calc_ntlmv2_hash() -> hmac_md5_usingrawkey(..., sess->sess_key) -> crypto_memneq() returns mismatch -> KEY_XCH arc4_crypt(..., sess->sess_key, ...) -> out_err without expiring the binding sessionDerive the base session key into a local buffer and copy it tosess->sess_key only after the proof matches. Return immediately onauthentication failure so KEY_XCH is only processed after successfulauthentication.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error pathIn nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,nvmet_req_uninit() is called unconditionally. However, if the commandarrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()had returned false and percpu_ref_tryget_live() was never executed. Theunconditional percpu_ref_put() inside nvmet_req_uninit() then causes arefcount underflow, leading to a WARNING inpercpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, andeventually a permanent workqueue deadlock.Check cmd->flags & NVMET_TCP_F_INIT_FAILED before callingnvmet_req_uninit(), matching the existing pattern innvmet_tcp_execute_request().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet-tcp: Fix potential UAF when ddgst mismatchShivam Kumar found via vulnerability testing:When data digest is enabled on an NVMe/TCP connection and a digestmismatch occurs on a non-final H2C_DATA PDU during an R2T-baseddata transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()calls nvmet_req_uninit() - which performs percpu_ref_put() on thesubmission queue - but does NOT mark the command as completed. Itdoes not set cqe->status, does not modify rbytes_done, and does notclear any flag. When the subsequent fatal error triggers queueteardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,checks nvmet_tcp_need_data_in() for each one, and finds that thealready-uninited command still appears to need data (becauserbytes_done < transfer_len and cqe->status == 0). It therefore callsnvmet_req_uninit() a second time on the same command - a doublepercpu_ref_put against a single percpu_ref_get.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in libsolv. This heap buffer overflow vulnerability occurs when a victim processes a specially crafted `.solv` file containing negative size values in the `repo_add_solv` function. This leads to an undersized memory allocation and a subsequent out-of-bounds write. An attacker could exploit this to cause a denial of service (DoS).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsolv-tools-base < 0.7.39-150600.8.24.1 (version in image is 0.7.34-150600.8.19.2).
Description: A flaw was found in libsolv. This stack-based buffer overflow vulnerability occurs in libsolv's Debian metadata parser when processing specially crafted Debian repository metadata. An attacker could exploit this by providing malicious SHA384 or SHA512 checksum tags, leading to memory corruption and a denial of service (DoS) in the affected system.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsolv-tools-base < 0.7.39-150600.8.24.1 (version in image is 0.7.34-150600.8.19.2).
Description: In the Linux kernel, the following vulnerability has been resolved:net: skmsg: preserve sg.copy across SG transformsThe sk_msg sg.copy bitmap is part of the scatterlist entry ownershipstate. A set bit tells sk_msg_compute_data_pointers() not to expose theentry through writable BPF ctx->data. This protects entries backed bypages that are not private to the sk_msg, such as splice-backed filepage-cache pages.Several sk_msg transform paths move, copy, split, or compactmsg->sg.data[] entries without moving the matching sg.copy bit. This canmake an externally backed entry arrive at a new slot with a clear copybit. A later SK_MSG verdict can then expose sg_virt(sge) as writablectx->data and BPF stores can modify the original page cache.Keep sg.copy synchronized with sg.data[] whenever entries aretransferred, shifted, split, or copied into a new sk_msg. Clear the bitwhen an entry is replaced by a newly allocated private page or freed.This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(),sk_msg_xfer(), and tls_split_open_record(), including the partial tailentry created during TLS open-record splitting.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme-fc: use lock accessing port_state and rport statenvme_fc_unregister_remote removes the remote port on a lport object atany point in time when there is no active association. This races withwith the reconnect logic, because nvme_fc_create_association is nottaking a lock to check the port_state and atomically increase theactive count on the rport.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: replace BUG_ON with bounds check for map->max_osdOSD indexes come from untrusted network packets. Boundary checks areadded to validate these against map->max_osd.[ idryomov: drop BUG_ON in ceph_get_primary_affinity(), minor cosmetic edits ]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: imm: Fix use-after-free bug caused by unfinished delayed workThe delayed work item 'imm_tq' is initialized in imm_attach() andscheduled via imm_queuecommand() for processing SCSI commands. When theIMM parallel port SCSI host adapter is detached through imm_detach(),the imm_struct device instance is deallocated.However, the delayed work might still be pending or executingwhen imm_detach() is called, leading to use-after-free bugswhen the work function imm_interrupt() accesses the alreadyfreed imm_struct memory.The race condition can occur as follows:CPU 0(detach thread) | CPU 1 | imm_queuecommand() | imm_queuecommand_lck()imm_detach() | schedule_delayed_work() kfree(dev) //FREE | imm_interrupt() | dev = container_of(...) //USE dev-> //USEAdd disable_delayed_work_sync() in imm_detach() to guarantee propercancellation of the delayed work item before imm_struct is deallocated.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mlxsw: spectrum_mr: Fix use-after-free when updating multicast route statsCited commit added a dedicated mutex (instead of RTNL) to protect themulticast route list, so that it will not change while the driverperiodically traverses it in order to update the kernel about multicastroute stats that were queried from the device.One instance of list entry deletion (during route replace) was missedand it can result in a use-after-free [1].Fix by acquiring the mutex before deleting the entry from the list andreleasing it afterwards.[1]BUG: KASAN: slab-use-after-free in mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum]Read of size 8 at addr ffff8881523c2fa8 by task kworker/2:5/22043CPU: 2 UID: 0 PID: 22043 Comm: kworker/2:5 Not tainted 6.18.0-rc1-custom-g1a3d6d7cd014 #1 PREEMPT(full)Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017Workqueue: mlxsw_core mlxsw_sp_mr_stats_update [mlxsw_spectrum]Call Trace: dump_stack_lvl+0xba/0x110 print_report+0x174/0x4f5 kasan_report+0xdf/0x110 mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 Allocated by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 mlxsw_sp_mr_route_add+0xd8/0x4770 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30Freed by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x43/0x70 kfree+0x14e/0x700 mlxsw_sp_mr_route_add+0x2dea/0x4770 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:444 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: act_gate: snapshot parameters with RCU on replaceThe gate action can be replaced while the hrtimer callback or dump path iswalking the schedule list.Convert the parameters to an RCU-protected snapshot and swap updates undertcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omitsthe entry list, preserve the existing schedule so the effective state isunchanged.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: mtk_eth_soc: Reset prog ptr to old_prog in case of error in mtk_xdp_setup()Reset eBPF program pointer to old_prog and do not decrease its ref-countif mtk_open routine in mtk_xdp_setup() fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shimThe root cause of this bug is that when 'bpf_link_put' reduces therefcount of 'shim_link->link.link' to zero, the resource is consideredreleased but may still be referenced via 'tr->progs_hlist' in'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in'bpf_shim_tramp_link_release' is deferred. During this window, anotherprocess can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.Based on Martin KaFai Lau's suggestions, I have created a simple patch.To fix this: Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'. Only increment the refcount if it is not already zero.Testing: I verified the fix by adding a delay in 'bpf_shim_tramp_link_release' to make the bug easier to trigger:static void bpf_shim_tramp_link_release(struct bpf_link *link){ /* ... */ if (!shim_link->trampoline) return;+ msleep(100); WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline, NULL)); bpf_trampoline_put(shim_link->trampoline);}Before the patch, running a PoC easily reproduced the crash(almost 100%)with a call trace similar to KaiyanM's report.After the patch, the bug no longer occurs even after millions ofiterations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscsWhen shrinking the number of real tx queues,netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flushqdiscs for queues which will no longer be used.qdisc_reset_all_tx_gt() currently serializes qdisc_reset() withqdisc_lock(). However, for lockless qdiscs, the dequeue path isserialized by qdisc_run_begin/end() using qdisc->seqlock instead, soqdisc_reset() can run concurrently with __qdisc_run() and free skbswhile they are still being dequeued, leading to UAF.This can easily be reproduced on e.g. virtio-net by imposing heavytraffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 doneWith KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ...Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path bytaking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching theserialization model already used by dev_reset_queue().Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc statereflects an empty queue, avoiding needless re-scheduling.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardownA potential race condition exists in mana_hwc_destroy_channel() wherehwc->caller_ctx is freed before the HWC's Completion Queue (CQ) andEvent Queue (EQ) are destroyed. This allows an in-flight CQ interrupthandler to dereference freed memory, leading to a use-after-free orNULL pointer dereference in mana_hwc_handle_resp().mana_smc_teardown_hwc() signals the hardware to stop but does notsynchronize against IRQ handlers already executing on other CPUs. TheIRQ synchronization only happens in mana_hwc_destroy_cq() viamana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runsafter kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()can dereference freed caller_ctx (and rxq->msg_buf) inmana_hwc_handle_resp().Fix this by reordering teardown to reverse-of-creation order: destroythe TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. Thisensures all in-flight interrupt handlers complete before the memory theyaccess is freed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is falseA UAF issue occurs when the virtio_net driver is configured with napi_tx=Nand the device's IFF_XMIT_DST_RELEASE flag is cleared(e.g., during the configuration of tc route filter rules).When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stackexpects the driver to hold the reference to skb->dst until the packetis fully transmitted and freed. In virtio_net with napi_tx=N,skbs may remain in the virtio transmit ring for an extended period.If the network namespace is destroyed while these skbs are still pending,the corresponding dst_ops structure has freed. When a subsequent packetis transmitted, free_old_xmit() is triggered to clean up old skbs.It then calls dst_release() on the skb associated with the stale dst_entry.Since the dst_ops (referenced by the dst_entry) has already been freed,a UAF kernel paging request occurs.fix it by adds skb_dst_drop(skb) in start_xmit to explicitly releasethe dst reference before the skb is queued in virtio_net.Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ...Reproduction Steps:NETDEV="enp3s0"config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100}test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns}config_qdisc_route_filtertest_nssleep 2test_ns
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Do not skip unrelated mode changes in DSC validationStarting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation inatomic check"), amdgpu resets the CRTC state mode_changed flag to false whenrecomputing the DSC configuration results in no timing change for a particularstream.However, this is incorrect in scenarios where a change in MST/DSC configurationhappens in the same KMS commit as another (unrelated) mode change. For example,the integrated panel of a laptop may be configured differently (e.g., HDRenabled/disabled) depending on whether external screens are attached. In thiscase, plugging in external DP-MST screens may result in the mode_changed flagbeing dropped incorrectly for the integrated panel if its DSC configurationdid not change during precomputation in pre_validate_dsc().At this point, however, dm_update_crtc_state() has already created new streamsfor CRTCs with DSC-independent mode changes. In turn,amdgpu_dm_commit_streams() will never release the old stream, resulting in amemory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference tothe new stream either, which manifests as a use-after-free when the stream getsdisabled later on:BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977Workqueue: events drm_mode_rmfb_work_fnCall Trace: dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980Since there is no reliable way of figuring out whether a CRTC has unrelatedmode changes pending at the time of DSC validation, remember the value of themode_changed flag from before the point where a CRTC was marked as potentiallyaffected by a change in DSC configuration. Reset the mode_changed flag to thisearlier value instead in pre_validate_dsc().(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/efa: Fix use of completion ctx after freeOn admin queue completion handling, if the admin command completed witherror we print data from the completion context. The issue is that wealready freed the completion context in polling/interrupts handler whichmeans we print data from context in an unknown state (it might bealready used again).Change the admin submission flow so alloc/dealloc of the context will besymmetric and dealloc will be called after any potential use of thecontext.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:team: fix header_ops type confusion with non-Ethernet portsSimilar to commit 950803f72547 ("bonding: fix type confusion inbond_setup_by_slave()") team has the same class of header_ops typeconfusion.For non-Ethernet ports, team_setup_by_port() copies port_dev->header_opsdirectly. When the team device later calls dev_hard_header() ordev_parse_header(), these callbacks can run with the team net_deviceinstead of the real lower device, so netdev_priv(dev) is interpreted asthe wrong private type and can crash.The syzbot report shows a crash in bond_header_create(), but the rootcause is in team: the topology is gre -> bond -> team, and team callsthe inherited header_ops with its own net_device instead of the lowerdevice, so bond_header_create() receives a team device and interpretsnetdev_priv() as bonding private data, causing a type confusion crash.Fix this by introducing team header_ops wrappers for create/parse,selecting a team port under RCU, and calling the lower device callbackswith port->dev, so each callback always sees the correct net_devicecontext.Also pass the selected lower device to the lower parse callback, sorecursion is bounded in stacked non-Ethernet topologies and parsecallbacks always run with the correct device context.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: prevent policy_hthresh.work from racing with netns teardownA XFRM_MSG_NEWSPDINFO request can queue the per-net work itempolicy_hthresh.work onto the system workqueue.The queued callback, xfrm_hash_rebuild(), retrieves the enclosingstruct net via container_of(). If the net namespace is torn downbefore that work runs, the associated struct net may already havebeen freed, and xfrm_hash_rebuild() may then dereference stale memory.xfrm_policy_fini() already flushes policy_hash_work during teardown,but it does not synchronize policy_hthresh.work.Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so thequeued work cannot outlive the net namespace teardown and access afreed struct net.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MINThe BPF interpreter's signed 32-bit division and modulo handlers usethe kernel abs() macro on s32 operands. The abs() macro documentation(include/linux/math.h) explicitly states the result is undefined whenthe input is the type minimum. When DST contains S32_MIN (0x80000000),abs((s32)DST) triggers undefined behavior and returns S32_MIN unchangedon arm64/x86. This value is then sign-extended to u64 as0xFFFFFFFF80000000, causing do_div() to compute the wrong result.The verifier's abstract interpretation (scalar32_min_max_sdiv) computesthe mathematically correct result for range tracking, creating averifier/interpreter mismatch that can be exploited for out-of-boundsmap value access.Introduce abs_s32() which handles S32_MIN correctly by casting to u32before negating, avoiding signed overflow entirely. Replace all 8abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.s32 is the only affected case -- the s64 division/modulo handlers donot use abs().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:driver core: platform: use generic driver_override infrastructureWhen a driver is probed through __driver_attach(), the bus' match()callback is called without the device lock held, thus accessing thedriver_override field without a lock, which can cause a UAF.Fix this by using the driver-core driver_override infrastructure takingcare of proper locking internally.Note that calling match() from __driver_attach() without the device lockheld is intentional. [1]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cxl/port: Fix use after free of parent_port in cxl_detach_ep()cxl_detach_ep() is called during bottom-up removal when all CXL memorydevices beneath a switch port have been removed. For each port in thehierarchy it locks both the port and its parent, removes the endpoint,and if the port is now empty, marks it dead and unregisters the portby calling delete_switch_port(). There are two places during this workwhere the parent_port may be used after freeing:First, a concurrent detach may have already processed a port by thetime a second worker finds it via bus_find_device(). Without pinningparent_port, it may already be freed when we discover port->dead andattempt to unlock the parent_port. In a production kernel that's asilent memory corruption, with lock debug, it looks like this:[]DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current())[]WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310[]Call Trace:[]mutex_unlock+0xd/0x20[]cxl_detach_ep+0x180/0x400 [cxl_core][]devm_action_release+0x10/0x20[]devres_release_all+0xa8/0xe0[]device_unbind_cleanup+0xd/0xa0[]really_probe+0x1a6/0x3e0Second, delete_switch_port() releases three devm actions registeredagainst parent_port. The last of those is unregister_port() and itcalls device_unregister() on the child port, which can cascade. Ifparent_port is now also empty the device core may unregister and freeit too. So by the time delete_switch_port() returns, parent_port maybe free, and the subsequent device_unlock(&parent_port->dev) operateson freed memory. The kernel log looks same as above, with a differentoffset in cxl_detach_ep().Both of these issues stem from the absence of a lifetime guaranteebetween a child port and its parent port.Establish a lifetime rule for ports: child ports hold a reference totheir parent device until release. Take the reference when the portis allocated and drop it when released. This ensures the parent isvalid for the full lifetime of the child and eliminates the use afterfree window in cxl_detach_ep().This is easily reproduced with a reload of cxl_acpi in QEMU with CXLdevices present.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: raw: fix ro->uniq use-after-free in raw_rcv()raw_release() unregisters raw CAN receive filters via can_rx_unregister(),but receiver deletion is deferred with call_rcu(). This leaves a windowwhere raw_rcv() may still be running in an RCU read-side critical sectionafter raw_release() frees ro->uniq, leading to a use-after-free of thepercpu uniq storage.Move free_percpu(ro->uniq) out of raw_release() and into a raw-specificsocket destructor. can_rx_unregister() takes an extra reference to thesocket and only drops it from the RCU callback, so freeing uniq fromsk_destruct ensures the percpu area is not released until the relevantcallbacks have drained.[mkl: applied manually]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: 6fire: fix use-after-free on disconnectIn usb6fire_chip_abort(), the chip struct is allocated as the card'sprivate data (via snd_card_new with sizeof(struct sfire_chip)). Whensnd_card_free_when_closed() is called and no file handles are open, thecard and embedded chip are freed synchronously. The subsequentchip->card = NULL write then hits freed slab memory.Call trace: usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline] usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182 usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458 ... hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953Fix by moving the card lifecycle out of usb6fire_chip_abort() and intousb6fire_chip_disconnect(). The card pointer is saved in a localbefore any teardown, snd_card_disconnect() is called first to preventnew opens, URBs are aborted while chip is still valid, andsnd_card_free_when_closed() is called last so chip is never accessedafter the card may be freed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: hold claim backbone gateways by referencebatadv_bla_add_claim() can replace claim->backbone_gw and drop the oldgateway's last reference while readers still follow the pointer.The netlink claim dump path dereferences claim->backbone_gw->orig andtakes claim->backbone_gw->crc_lock without pinning the underlyingbackbone gateway. batadv_bla_check_claim() still has the same nakedpointer access pattern.Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operateon a stable gateway reference until the read-side work is complete.This keeps the dump and claim-check paths aligned with the lifetimerules introduced for the other BLA claim readers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: hold dev ref until after transport_finish NF_HOOKAfter async crypto completes, xfrm_input_resume() calls dev_put()immediately on re-entry before the skb reaches transport_finish.The skb->dev pointer is then used inside NF_HOOK and its okfn,which can race with device teardown.Remove the dev_put from the async resumption entry and insteaddrop the reference after the NF_HOOK call in transport_finish,using a saved device pointer since NF_HOOK may consume the skb.This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skipthe okfn.For non-transport exits (decaps, gro, drop) and secondaryasync return points, release the reference inline whenasync is set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_ct: fix use-after-free in timeout object destroynft_ct_timeout_obj_destroy() frees the timeout object with kfree()immediately after nf_ct_untimeout(), without waiting for an RCU graceperiod. Concurrent packet processing on other CPUs may still holdRCU-protected references to the timeout object obtained viarcu_dereference() in nf_ct_timeout_data().Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to deferfreeing until after an RCU grace period, matching the approach alreadyused in nfnetlink_cttimeout.c.KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:openvswitch: defer tunnel netdev_put to RCU releaseovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER alreadydetached the device. Dropping the netdev reference in destroy can racewith concurrent readers that still observe vport->dev.Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, letvport_netdev_free() drop the reference from the RCU callback, matchingthe non-tunnel destroy path and avoiding additional synchronizationunder RTNL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: ccp: Don't attempt to copy ID to userspace if PSP command failedWhen retrieving the ID for the CPU, don't attempt to copy the ID blob touserspace if the firmware command failed. If the failure was due to aninvalid length, i.e. the userspace buffer+length was too small, copyingthe number of bytes _firmware_ requires will overflow the kernel-allocatedbuffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388 CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222 sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e WARN if the driver says the command succeeded, but the firmware error codesays otherwise, as __sev_do_cmd_locked() is expected to return -EIO on anyfirwmware error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failedWhen retrieving the PDH cert, don't attempt to copy the blobs to userspaceif the firmware command failed. If the failure was due to an invalidlength, i.e. the userspace buffer+length was too small, copying the numberof bytes _firmware_ requires will overflow the kernel-allocated buffer andleak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033 CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025 Call Trace: dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347 sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e WARN if the driver says the command succeeded, but the firmware error codesays otherwise, as __sev_do_cmd_locked() is expected to return -EIO on anyfirwmware error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failedWhen retrieving the PEK CSR, don't attempt to copy the blob to userspaceif the firmware command failed. If the failure was due to an invalidlength, i.e. the userspace buffer+length was too small, copying the numberof bytes _firmware_ requires will overflow the kernel-allocated buffer andleak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405 CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872 sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e WARN if the driver says the command succeeded, but the firmware error codesays otherwise, as __sev_do_cmd_locked() is expected to return -EIO on anyfirwmware error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: ucsi: validate connector number in ucsi_notify_common()The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a7-bit field (0-127) that is used to index into the connector array inucsi_connector_change(). However, the array is only allocated for thenumber of connectors reported by the device (typically 2-4 entries).A malicious or malfunctioning device could report an out-of-rangeconnector number in the CCI, causing an out-of-bounds array access inucsi_connector_change().Add a bounds check in ucsi_notify_common(), the central point where CCIis parsed after arriving from hardware, so that bogus connector numbersare rejected before they propagate further.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: gyro: mpu3050: Move iio_device_register() to correct locationiio_device_register() should be at the end of the probe function toprevent race conditions.Place iio_device_register() at the end of the probe function and placeiio_device_unregister() accordingly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: gyro: mpu3050: Fix incorrect free_irq() variableThe handler for the IRQ part of this driver is mpu3050->trig but,in the teardown free_irq() is called with handler mpu3050.Use correct IRQ handler when calling free_irq().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In nspawn in systemd 233 through 259 before 260, an escape-to-host action can occur via a crafted optional config file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsystemd0 > 0-0 (version in image is 254.27-150600.4.62.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: server: fix use-after-free in smb2_open()The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) isdereferenced after rcu_read_unlock(), creating a use-after-freewindow.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hwrng: core - use RCU and work_struct to fix race conditionCurrently, hwrng_fill is not cleared until the hwrng_fillfn() threadexits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutexlock, a concurrent hwrng_unregister() may call kthread_stop() again onthe same task.Additionally, if hwrng_unregister() is called immediately afterhwrng_register(), the stopped thread may have never been executed. Thus,hwrng_fill remains dirty even after hwrng_unregister() returns. In thiscase, subsequent calls to hwrng_register() will fail to start newthreads, and hwrng_unregister() will call kthread_stop() on the samefreed task. In both cases, a use-after-free occurs:refcount_t: addition on 0; use-after-free.WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200This patch fixes the race by protecting the global hwrng_fill pointerinside the rng_mutex lock, so that hwrng_fillfn() thread is stopped onlyonce, and calls to kthread_run() and kthread_stop() are serializedwith the lock held.To avoid deadlock in hwrng_fillfn() while being stopped with the lockheld, we convert current_rng to RCU, so that get_current_rng() can readcurrent_rng without holding the lock. To remove the lock from put_rng(),we also delay the actual cleanup into a work_struct.Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()checks are removed from its callers.With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can nolonger clear hwrng_fill itself. Therefore, if hwrng_fillfn() returnsdirectly after current_rng is dropped, kthread_stop() would be called ona freed task_struct later. To fix this, hwrng_fillfn() calls schedule()now to keep the task alive until being stopped. The kthread_stop() callis also moved from hwrng_unregister() to drop_current_rng(), ensuringkthread_stop() is called on all possible paths where current_rng becomesNULL, so that the thread would not wait forever.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udf: fix partition descriptor append bookkeepingMounting a crafted UDF image with repeated partition descriptors cantrigger a heap out-of-bounds write in part_descs_loc[].handle_partition_descriptor() deduplicates entries by partition number,but appended slots never record partnum. As a result duplicatePartition Descriptors are appended repeatedly and num_part_descs keepsgrowing.Once the table is full, the growth path still sizes the allocation frompartnum even though inserts are indexed by num_part_descs. If partnum isalready aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keepthe old capacity and the next append writes past the end of the table.Store partnum in the appended slot and size growth from the next appendcount so deduplication and capacity tracking follow the same model.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: ns: Fix use-after-free in driver remove()In the remove callback, if a packet arrives after destroy_workqueue() iscalled, but before sock_release(), the qrtr_ns_data_ready() callback willtry to queue the work, causing use-after-free issue.Fix this issue by saving the default 'sk_data_ready' callback duringqrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback atthe start of remove(). This ensures that even if a packet arrives afterdestroy_workqueue(), the work struct will not be dereferenced.Note that it is also required to ensure that the RX threads are completedbefore destroying the workqueue, because the threads could be using theqrtr_ns_data_ready() callback.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_conn: fix potential UAF in create_big_syncAdd hci_conn_valid() check in create_big_sync() to detect staleconnections before proceeding with BIG creation. Handle theresulting -ECANCELED in create_big_complete() and re-validate theconnection under hci_dev_lock() before dereferencing, matching thepattern used by create_le_conn_complete() and create_pa_complete().Keep the hci_conn object alive across the async boundary by takinga reference via hci_conn_get() when queueing create_big_sync(), anddropping it in the completion callback. The refcount and the lockare complementary: the refcount keeps the object allocated, whilehci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() onhdev->conn_hash, as required by hci_conn_del().hci_conn_put() is called outside hci_dev_unlock() so the final put(which resolves to kfree() via bt_link_release) does not run underhdev->lock, though the release path would be safe either way.Without this, create_big_complete() would unconditionallydereference the conn pointer on error, causing a use-after-freevia hci_connect_cfm() and hci_conn_del().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: topcliff-pch: fix use-after-free on unbindGive the driver a chance to flush its queue before releasing the DMAbuffers on driver unbind
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, sockmap: Take state lock for af_unix iterWhen a BPF iterator program updates a sockmap, there is a race condition inunix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ----------// unix_stream_bpf_update_proto()sk_pair = unix_peer(sk)if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair)sock_hold(sk_pair) // UaFMore practically, this fix guarantees that the iterator program isconsistently provided with a unix socket that remains stable duringiterator execution.[1]:BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7eAllocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7eFreed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix abuse of kprobe_write_ctx via freplaceuprobe programs are allowed to modify struct pt_regs.Since the actual program type of uprobe is KPROBE, it can be abused tomodify struct pt_regs via kprobe+freplace when the kprobe attaches tokernel functions.For example,SEC("?kprobe")int kprobe(struct pt_regs *regs){ return 0;}SEC("?freplace")int freplace_kprobe(struct pt_regs *regs){ regs->di = 0; return 0;}freplace_kprobe prog will attach to kprobe prog.kprobe prog will attach to a kernel function.Without this patch, when the kernel function runs, its first arg willalways be set as 0 via the freplace_kprobe prog.To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallowattaching freplace programs on kprobe programs with differentkprobe_write_ctx values.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work()When the mt7915 pci chip is detaching, the mt7915_crash_data isreleased in mt7915_coredump_unregister(). However, the work itemdump_work may still be running or pending, leading to UAF bugswhen the already freed crash_data is dereferenced again inmt7915_mac_dump_work().The race condition can occur as follows:CPU 0 (removal path) | CPU 1 (workqueue)mt7915_pci_remove() | mt7915_sys_recovery_set() mt7915_unregister_device() | mt7915_reset() mt7915_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7915_mac_dump_work() | crash_data-> // UAFFix this by ensuring dump_work is properly canceled beforethe crash_data is deallocated. Add cancel_work_sync() inmt7915_unregister_device() to synchronize with any pendingor executing dump work.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rpmsg: char: Fix use-after-free on probe error pathrpmsg_chrdev_probe() stores the newly allocated eptdev in the defaultendpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). Ifrpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev whilethe default endpoint may still dispatch callbacks with the stale privpointer.Avoid publishing eptdev through the default endpoint untilrpmsg_chrdev_eptdev_add() succeeds. Messages received before the privpointer is published should be ignored by rpmsg_ept_cb(). Flow-controlupdates can hit rpmsg_ept_flow_cb() in the same window, so make bothcallbacks return success when priv is NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pNFS: Fix use-after-free in pnfs_update_layout()When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(),the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds,pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(),which still references 'lo'. This results in a use-after-free when thetracepoint accesses lo's fields.Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hdlc_ppp: sync per-proto timers before freeing hdlc stateEach PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct pppregisters a timer via timer_setup(). That struct ppp is thehdlc->state allocation, which detach_hdlc_protocol() frees with kfree()in both teardown paths: unregister_hdlc_device() and the re-attach insideattach_hdlc_protocol().The ppp proto never registered a .detach callback, sodetach_hdlc_protocol() performs no timer synchronization before thekfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(),is partial (it does not wait for a running callback) and only runs on the->CLOSED transition; ppp_stop()/ppp_close() do not sync either. Appp_timer callback already executing (blocked on ppp->lock) survives thekfree and then dereferences proto->state / ppp->lock in freed memory,leading to a use-after-free.Fix this by adding a .detach helper that calls timer_shutdown_sync() onevery per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev)before kfree(hdlc->state), so timer_shutdown_sync()now runs on both free paths.timer_shutdown_sync() is used instead of timer_delete_sync() because thekeepalive path re-arms the timer through add_timer()/mod_timer() andshutdown blocks any re-activation during teardown.Initialize the per-protocol timers in ppp_ioctl() when the protocol isattached, and remove the now-redundant timer_setup() from ppp_start(), sothat the timers are initialized exactly once at attach time andppp_timer_release() never operates on uninitialized timer_liststructures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), sostruct ppp's protos[i].timer is uninitialized garbage until the firsttimer_setup(); without this init-at-attach, attaching the PPP protocolwithout ever bringing the device up would leave timer_shutdown_sync()operating on uninitialized memory in .detach. Moving the init out ofppp_start() (which only runs on NETDEV_UP) into the attach path makes theinitialization unconditional and avoids initializing the same timer_listtwice.This bug was found by static analysis.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: fix use-after-free in gfs2_qd_deallocgfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(),accesses the superblock object sdp through qd->qd_sbd after freeing qd.It does so to decrement sd_quota_count and wake up sd_kill_wait.However, by the time the RCU callback runs, gfs2_put_super() may havealready freed sdp via free_sbd(). This can happen whengfs2_quota_cleanup() is called during unmount: it disposes of quotaobjects via call_rcu() and then waits on sd_kill_wait with a 60-secondtimeout. If the timeout expires, or if gfs2_gl_hash_clear() triggersadditional qd_put() calls that schedule more RCU callbacks after thewait completes, gfs2_put_super() will proceed to free the superblockwhile RCU callbacks referencing it are still pending.Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensureall pending RCU callbacks (including gfs2_qd_dealloc) have completedbefore the superblock is freed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: use kvfree() for replaced sysctl write bufferproc_sys_call_handler() allocates its temporary sysctl buffer withkvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Sincekvzalloc() may fall back to vmalloc() for large allocations, freeingthat buffer with kfree() is wrong and can corrupt memory.Use kvfree() to safely handle both kmalloc and kvzalloc()/vmallocallocations.The bug was first flagged by an experimental analysis tool we aredeveloping for kernel memory-management bugs while analyzingv6.13-rc1. The tool is still under development and is not yet publiclyavailable. Manual inspection confirms that the bug is stillpresent in v7.1-rc5.Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted withKASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, thetest tree also included the accompanying fix for the stale ret == 1check in __cgroup_bpf_run_filter_sysctl(). The reproducer confinesfailslab injections to the proc_sys_call_handler() range, usesstacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to/proc/sys/kernel/domainname from a task in the target cgroup. Underthat setup, fail-nth=1 triggered the fault: BUG: unable to handle page fault for address: ffffeb0200024d48 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 SMP KASAN NOPTI CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:kfree+0x6e/0x510 ... Call Trace: ? __cgroup_bpf_run_filter_sysctl+0x626/0xc30 __cgroup_bpf_run_filter_sysctl+0x74d/0xc30 ? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? __kvmalloc_node_noprof+0x345/0x870 ? proc_sys_call_handler+0x250/0x480 ? srso_return_thunk+0x5/0x5f proc_sys_call_handler+0x3a2/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? selinux_file_permission+0x39f/0x500 ? srso_return_thunk+0x5/0x5f ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... With this fix applied on top of the same test setup, rerunning thereproducer with fail-nth=1 yields no corresponding Oops reports.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()The aoe driver (or similar) generates a non-IPv6 packet(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()on a 6LoWPAN interface (configured by the user or test case).Since the packet is not IPv6, the 6LoWPAN header_ops->create function(lowpan_header_create or header_create) returns early without initializingthe lowpan_addr_info structure in the skb headroom.In the transmit function (lowpan_xmit), the driver calls lowpan_header(or setup_header) which unconditionally copies and uses the lowpan_addr_infofrom the headroom, which contains uninitialized data.Fix this by dropping non IPv6 packets.A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usbip: vudc: Fix use after free bug in vudc_remove due to race conditionThis patch follows up Zheng Wang's 2023 report of a use-after-free invudc_remove(). The original thread stalled on Shuah Khan's request forruntime testing of the unplug/unbind path. This patch supplies thattesting and keeps Zheng's original fix shape.In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().vudc_remove() can then free the containing struct vudc while the timer isstill pending or executing.KASAN confirms the race on an unpatched x86_64 QEMU guest withCONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loopthat repeatedly writes a socket fd to usbip_sockfd, closes the socketpair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100This lands in the timer core rather than v_timer() itself because theembedded timer_list is being walked after its containing struct vudc hasalready been freed. The underlying lifetime bug is the same one Zhengreported.With v_stop_timer() called from vudc_remove() and the timer deletedsynchronously, the same harness completed 5000 bind/unbind iterationswith no KASAN report.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ringWhen an sk_msg scatterlist ring wraps (sg.end < sg.start),tls_push_record() chains the tail portion of the ring to the headusing sg_chain(). An extra entry in the sg array is reserved forthis: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2];The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data);This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS]instead of the true last entry. This is likely due to a "race" ofthe commit under Fixes landing close tocommit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down")Convert to ARRAY_SIZE and drop the data[start] / - start (as suggestedby Sabrina).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: mcast: fix use-after-free in orig_node RCU releasebatadv_mcast_purge_orig() removes entries from RCU-protected hlists butdoes not wait for an RCU grace period before returning. Concurrent RCUreaders may still accesses references to those entries at the point ofremoval. RCU-protected readers trying to operate on entries likeorig->mcast_want_all_ipv6_node will then access already freed memory.Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(),just before the call_rcu() invocation. This ensures RCU readers that wereactive at purge time have drained before the orig_node memory is reclaimed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()rmnet_dellink() removes the endpoint from the hash table withhlist_del_init_rcu() and then immediately frees it with kfree(). However,RCU readers on the receive path (rmnet_rx_handler ->__rmnet_map_ingress_handler) may still hold a reference to the endpoint anddereference ep->egress_dev after the memory has been freed. The endpoint isa kmalloc-32 object, and the stale read at offset 8 corresponds to theegress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) Add an rcu_head field to struct rmnet_endpoint and replace kfree() withkfree_rcu() so the endpoint memory remains valid through the RCU graceperiod. Also remove the rmnet_vnd_dellink() call and inline only thenr_rmnet_devs decrement, since rmnet_vnd_dellink() would setep->egress_dev to NULL during the grace period, creating a data racewith lockless readers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: bnep: pin L2CAP connection during netdev registrationbnep_add_connection() reads the L2CAP connection without holding thechannel lock, then passes its HCI device to register_netdev(). Controllerteardown can clear and release that connection concurrently, leaving thenetwork device registration path to dereference a freed parent device.Take a reference to the L2CAP connection while holding the channel lock.Retain it until register_netdev() has taken the parent device reference.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failureieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the oldtemplate before allocating the replacement. If the kzalloc() then fails,it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still pointsat the object already queued for freeing. A later update or AP teardownre-queues that same rcu_head; the second free is caught by KASAN when theRCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800d06f300 by task exploit/145 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-128 of size 128Queue the old object for kfree_rcu() only after the new one is published,matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Fix a use-after-free problem in rxe_mmaprxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps listand releases pending_lock while the struct's kref is still at 1: list_del_init(&ip->pending_mmaps); spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */ ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */ [...] rxe_vma_open(vma); /* kref_get, ref -> 2 */ remap_vmalloc_range_partial() walks PTEs without any lock.A concurrent DESTROY_CQ ioctl on another CPU calls: kref_put(&q->ip->ref, rxe_mmap_release) /* ref 1->0 */ vfree(ip->obj) /* clears vmalloc PTEs mid-walk */ kfree(ip) /* frees rxe_mmap_info */This yields: 1. Kernel crash, vmalloc_to_page() returns NULL when vfree wins the per-PTE race -> vm_insert_page(NULL) -> GPF in validate_page_before_insert 2. Page UAF, vmalloc_to_page() reads a stale PTE before vfree clears it. User VMA holds a PTE to a free'd page which might eventually get reallocated later by vmalloc which allows the attacker to get a clean page-level UAF. It is worth noting that even though a page-level UAF is possible given the strong primitive, it is statistically very difficult to achieve given the very short time window (after the last insert_page and before the kref_get).The call trace are as below: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 1000 PID: 413 Comm: poc Not tainted 7.0.0-rc5-dirty #28 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:validate_page_before_insert+0x32/0x300 Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 e8 93 b5 a3 ff 48 8d 7b 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 7b 02 00 00 4c 8b 63 08 31 ff 4d 89 e5 41 83 e5 RSP: 0018:ffff88811b15f2f0 EFLAGS: 00000202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008 RBP: ffff88811b15f318 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881181eee00 R13: 0000000000000000 R14: ffff8881181eee00 R15: ffff8881181eee20 FS: 00007b1e000f76c0(0000) GS:ffff8884268e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007b1e00a24ac0 CR3: 0000000116eb3000 CR4: 00000000000006f0 Call Trace: insert_page+0x8f/0x190 ? __pfx_insert_page+0x10/0x10 ? kasan_save_alloc_info+0x38/0x60 vm_insert_page+0x2e7/0x400 remap_vmalloc_range_partial+0x212/0x3e0 remap_vmalloc_range+0x6e/0xb0 ? __kasan_check_write+0x14/0x30 rxe_mmap+0x2e9/0x5d0 ib_uverbs_mmap+0x1ad/0x2c0 __mmap_region+0x12c2/0x2ad0 ? __pfx___mmap_region+0x10/0x10 ? __sanitizer_cov_trace_switch+0x58/0xb0 ? mas_prev_slot+0x360/0x39c0 ? __sanitizer_cov_trace_switch+0x58/0xb0 ? mas_next_slot+0x1e5b/0x2f40 ? __sanitizer_cov_trace_cmp8+0x18/0x30 ? unmapped_area_topdown+0x4dd/0x610 ? kfree+0x1b1/0x440 ? free_cpumask_var+0x16/0x30 ? __kasan_slab_free+0x7d/0xa0 ? __sanitizer_cov_trace_cmp8+0x18/0x30 mmap_region+0x2e6/0x3c0 do_mmap+0xa3e/0x12a0 ? __pfx_do_mmap+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? down_write_killable+0xba/0x160 ? __pfx_down_write_killable+0x10/0x10 ? __sanitizer_cov_trace_cmp4+0x16/0x30 vm_mmap_pgoff+0x2d4/0x4a0 ? __pfx_vm_mmap_pgoff+0x10/0x10 ? fget+0x1bf/0x270 ksys_mmap_pgoff+0x40c/0x690 ? __sanitizer_cov_trace_const_cmp4+0x16/0x30 ? __pfx_ksys_mmap_pgoff+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? _raw_spin_trylock+0xbb/0x130 ? __pfx__raw_spin_trylock+0x10/0x10 __x64_sys_mmap+0x135/0x1e0 x64_sys_c---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_midi: cancel pending IN work before freeing the midi objectThe f_midi driver embeds a work item (midi->work) whose handler,f_midi_in_work(), dereferences the enclosing struct f_midi throughcontainer_of(). This work is armed from two sites: f_midi_complete(),on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSArawmidi output-stream start.Neither f_midi_disable() nor f_midi_unbind() cancels midi->work.f_midi_disable() only disables the endpoints and drains the in_req_fifo;it does not synchronize the work item, and the sound card is releasedasynchronously to the final free of the midi object.The midi object is reference-counted (midi->free_ref) and is freed inf_midi_free() only once both the usb_function reference and the rawmidiprivate_data reference have been dropped. In f_midi_unbind(),f_midi_disable() runs before the sound card is released, so while theUSB endpoints are already disabled the rawmidi device is still usable byan open substream. A concurrent userspace write on such a substream canreach f_midi_in_trigger() and queue midi->work again afterf_midi_disable() has returned. A work item armed this way may still bepending when the last reference drops and f_midi_free() proceeds tokfree(midi), letting f_midi_in_work() dereference the struct after ithas been freed, a use-after-free.For this reason cancelling midi->work in f_midi_disable() would not besufficient: the ALSA trigger path can rearm the work after disable()returns. Cancelling at the refcount-zero free site is the boundaryafter which neither arming source can survive, because by then bothreferences that keep the midi object alive have been dropped: the USBendpoints are already disabled and the rawmidi device has been released.Fix this by calling cancel_work_sync(&midi->work) in the refcount-zeroblock of f_midi_free(), before the embedded work_struct is freed alongwith the rest of the structure. opts->lock is a sleeping mutex, socalling cancel_work_sync() under it is permitted, and the handler takesmidi->transmit_lock rather than opts->lock, so no self-deadlock canoccur while it waits for a running instance of the work to finish.This issue was found by an in-house static analysis tool.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: brcmfmac: drain bus_reset work on device removalbrcmf_fw_crashed() and the debugfs "reset" entry both scheduledrvr->bus_reset, whose callback recovers drvr through container_of()and dereferences it. The removal path frees drvr (brcmf_free ->wiphy_free) without draining the work, so a bus_reset callback pendingor running during removal can outlive drvr.Cancellation cannot live in brcmf_detach() or brcmf_free(): the workcallback reaches teardown through the bus .reset op (PCIebrcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait forthe running work and deadlock.Add a per-bus mutex (bus_reset_lock) and route all arming throughbrcmf_bus_schedule_reset(), which under the lock skips when the bus ismarked removing. Each bus remove entry callsbrcmf_bus_cancel_reset_work(), which under the same lock sets removingand cancels the work. Holding the mutex across cancel_work_sync() makesthe set-removing + drain step atomic. Every producer reaches the armingpath from process context -- the PCIe firmware-halt notification runs inthe threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmailpath runs from the data workqueue -- so the mutex is taken only insleepable contexts. Where applicable the remove entry first stops thefirmware-crash producer: on PCIe mask the mailbox and synchronize_irq;on SDIO unregister the bus interrupt and cancel the data worker, whichalso reports firmware halts through brcmf_fw_crashed(). The mutex isinitialized at bus allocation. The SDIO suspend power-off path freesdrvr through the same brcmf_sdiod_remove() and takes the same lock;resume re-allows the work only on a successful re-probe.Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can firebefore brcmf_attach() wires up drvr, and it dereferences drvr(bphy_err/brcmf_dev_coredump) before reaching the arming gate.The bus_reset work is shared across buses, so the drain is applied toevery remove path: PCIe (the .reset op introduced by the Fixes commit),SDIO (arms the same work through brcmf_fw_crashed()), and USB (via thedebugfs "reset" entry). cancel_work_sync() drains a running or pendingbus_reset work item before removal frees drvr, and patch 1/2 makes thescratch-buffer release safe when reset teardown has already releasedthose DMA buffers.This patch fixes the lifetime of the bus_reset work item itself. It doesnot attempt to address the separate, pre-existing lifetime of theasynchronous firmware completion started by the PCIe reset path. Thatcallback needs its own lifetime/ownership protocol and is being trackedseparately.This issue was found by an in-house static analysis tool.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing backIn the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checksIFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logicin the function `rtnl_bridge_setlink` to enable the loop to also checkthe length of the IFLA_BRIDGE_MODE attribute. However, this adjustmentremoved the `break` statement and led to an error logic of the flagswriting back at the end of this function.if (have_flags) memcpy(nla_data(attr), &flags, sizeof(flags)); // attr should point to IFLA_BRIDGE_FLAGS NLA !!!Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.However, this is not necessarily true fow now as the updated loop will letthe attr point to the last NLA, even an invalid NLA which could causeoverflow writes.This patch introduces a new variable `br_flag` to save the NLA pointerthat points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentionederror logic.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ftruncate: pass a signed offsetThe old ftruncate() syscall, using the 32-bit off_t misses a signextension when called in compat mode on 64-bit architectures. As aresult, passing a negative length accidentally succeeds in truncatingto file size between 2GiB and 4GiB.Changing the type of the compat syscall to the signed compat_off_tchanges the behavior so it instead returns -EINVAL.The native entry point, the truncate() syscall and the correspondingloff_t based variants are all correct already and do not sufferfrom this mistake.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: When doing multi-threaded LDAPS transfers (LDAP over TLS) with libcurl,changing TLS options in one thread would inadvertently change them globallyand therefore possibly also affect other concurrently setup transfers.Disabling certificate verification for a specific transfer couldunintentionally disable the feature for other threads as well.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: parse_dfs_referrals: prevent oob on malformed inputMalicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS- reply smaller than sizeof(struct get_dfs_referral_rsp)- reply with number of referrals smaller than NumberOfReferrals in theheaderProcessing of such replies will cause oob.Return -EINVAL error on such replies to prevent oob-s.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: use RCU in ip6_output()Use RCU in ip6_output() in order to use dst_dev_rcu() to preventpossible UAF.We can remove rcu_read_lock()/rcu_read_unlock() pairsfrom ip6_finish_output2().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: use dst_dev_rcu() in sk_setup_caps()Use RCU to protect accesses to dst->dev from sk_setup_caps()and sk_dst_gso_max_size().Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(),and ip_dst_mtu_maybe_forward().ip4_dst_hoplimit() can use dst_dev_net_rcu().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: use dst_dev_rcu() in tcp_fastopen_active_disable_ofo_check()Use RCU to avoid a pair of atomic operations and a potentialUAF on dst_dev()->flags.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsingThe Supported Rates IE length from an incoming Association Request framewas used directly as the memcpy() length when copying into a fixed-size16-byte stack buffer (supportRate). A malicious station can advertise anIE length larger than 16 bytes, causing a stack buffer overflow.Clamp ie_len to the buffer size before copying the Supported Rates IE,and correct the bounds check when merging Extended Supported Rates toprevent a second potential overflow.This prevents kernel stack corruption triggered by malformed associationrequests.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: refresh inline data size before write operationsThe cached ei->i_inline_size can become stale between the initial sizecheck and when ext4_update_inline_data()/ext4_create_inline_data() useit. Although ext4_get_max_inline_size() reads the correct value at thetime of the check, concurrent xattr operations can modify i_inline_sizebefore ext4_write_lock_xattr() is acquired.This causes ext4_update_inline_data() and ext4_create_inline_data() towork with stale capacity values, leading to a BUG_ON() crash inext4_write_inline_data(): kernel BUG at fs/ext4/inline.c:1331! BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);The race window:1. ext4_get_max_inline_size() reads i_inline_size = 60 (correct)2. Size check passes for 50-byte write3. [Another thread adds xattr, i_inline_size changes to 40]4. ext4_write_lock_xattr() acquires lock5. ext4_update_inline_data() uses stale i_inline_size = 606. Attempts to write 50 bytes but only 40 bytes actually available7. BUG_ON() triggersFix this by recalculating i_inline_size via ext4_find_inline_data_nolock()immediately after acquiring xattr_sem. This ensures ext4_update_inline_data()and ext4_create_inline_data() work with current values that are protectedfrom concurrent modifications.This is similar to commit a54c4613dac1 ("ext4: fix race writing to aninline_data file while its xattrs are changing") which fixed i_inline_offstaleness. This patch addresses the related i_inline_size staleness issue.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iomap: adjust read range correctly for non-block-aligned positionsiomap_adjust_read_range() assumes that the position and length passed inare block-aligned. This is not always the case however, as shown in thesyzbot generated case for erofs. This causes too many bytes to beskipped for uptodate blocks, which results in returning the incorrectposition and length to read in. If all the blocks are uptodate, thisunderflows length and returns a position beyond the folio.Fix the calculation to also take into account the block offset whencalculating how many bytes can be skipped for uptodate blocks.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: make decode_pool() more resilient against corrupted osdmapsIf the osdmap is (maliciously) corrupted such that the encoded lengthof ceph_pg_pool envelope is less than what is expected for a particularencoding version, out-of-bounds reads may ensue because the only boundscheck that is there is based on that length value.This patch adds explicit bounds checks for each field that is decodedor skipped.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: dsa: properly keep track of conduit referenceProblem description-------------------DSA has a mumbo-jumbo of reference handling of the conduit net deviceand its kobject which, sadly, is just wrong and doesn't make sense.There are two distinct problems.1. The OF path, which uses of_find_net_device_by_node(), never releases the elevated refcount on the conduit's kobject. Nominally, the OF and non-OF paths should result in objects having identical reference counts taken, and it is already suspicious that dsa_dev_to_net_device() has a put_device() call which is missing in dsa_port_parse_of(), but we can actually even verify that an issue exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command "before" and "after" applying this patch:(unbind the conduit driver for net device eno2)echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbindwe see these lines in the output diff which appear only with the patchapplied:kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000)kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000)2. After we find the conduit interface one way (OF) or another (non-OF), it can get unregistered at any time, and DSA remains with a long-lived, but in this case stale, cpu_dp->conduit pointer. Holding the net device's underlying kobject isn't actually of much help, it just prevents it from being freed (but we never need that kobject directly). What helps us to prevent the net device from being unregistered is the parallel netdev reference mechanism (dev_hold() and dev_put()).Actually we actually use that netdev tracker mechanism implicitly onuser ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces withthe DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link().But time still passes at DSA switch probe time between the initialof_find_net_device_by_node() code and the user port creation time, timeduring which the conduit could unregister itself and DSA wouldn't knowabout it.So we have to run of_find_net_device_by_node() under rtnl_lock() toprevent that from happening, and release the lock only with the netdevtracker having acquired the reference.Do we need to keep the reference until dsa_unregister_switch() /dsa_switch_shutdown()?1: Maybe yes. A switch device will still be registered even if all user ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal"), and the cpu_dp->conduit pointers remain valid. I haven't audited all call paths to see whether they will actually use the conduit in lack of any user port, but if they do, it seems safer to not rely on user ports for that reference.2. Definitely yes. We support changing the conduit which a user port is associated to, and we can get into a situation where we've moved all user ports away from a conduit, thus no longer hold any reference to it via the net device tracker. But we shouldn't let it go nonetheless - see the next change in relation to dsa_tree_find_first_conduit() and LAG conduits which disappear. We have to be prepared to return to the physical conduit, so the CPU port must explicitly keep another reference to it. This is also to say: the user ports and their CPU ports may not always keep a reference to the same conduit net device, and both are needed.As for the conduit's kobject for the /sys/class/net/ entry, we don'tcare about it, we can release it as soon as we hold the net deviceobject itself.History and blame attribution-----------------------------The code has been refactored so many times, it is very difficult tofollow and properly attribute a blame, but I'll try to make a shorthistory which I hope to be correct.We have two distinct probing paths:- one for OF, introduced in 2016 i---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: scarlett2: Fix buffer overflow in config retrievalThe scarlett2_usb_get_config() function has a logic error in theendianness conversion code that can cause buffer overflows whencount > 1.The code checks `if (size == 2)` where `size` is the total buffer size inbytes, then loops `count` times treating each element as u16 (2 bytes).This causes the loop to access `count * 2` bytes when the buffer onlyhas `size` bytes allocated.Fix by checking the element size (config_item->size) instead of thetotal buffer size. This ensures the endianness conversion matches theactual element type.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gve: Fix stats report corruption on queue count changeThe driver and the NIC share a region in memory for stats reporting.The NIC calculates its offset into this region based on the total sizeof the stats region and the size of the NIC's stats.When the number of queues is changed, the driver's stats region isresized. If the queue count is increased, the NIC can write pastthe end of the allocated stats region, causing memory corruption.If the queue count is decreased, there is a gap between the driverand NIC stats, leading to incorrect stats reporting.This change fixes the issue by allocating stats region with maximumsize, and the offset calculation for NIC stats is changed to matchwith the calculation of the NIC.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: libertas: fix use-after-free in lbs_free_adapter()The lbs_free_adapter() function uses timer_delete() (non-synchronous)for both command_timer and tx_lockup_timer before the structure isfreed. This is incorrect because timer_delete() does not wait forany running timer callback to complete.If a timer callback is executing when lbs_free_adapter() is called,the callback will access freed memory since lbs_cfg_free() frees thecontaining structure immediately after lbs_free_adapter() returns.Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,which would all be use-after-free violations.Use timer_delete_sync() instead to ensure any running timer callbackhas completed before returning.This bug was introduced in commit 8f641d93c38a ("libertas: detect TXlockups and reset hardware") where del_timer() was used instead ofdel_timer_sync() in the cleanup path. The command_timer has had thesame issue since the driver was first written.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: radiotap: reject radiotap with unknown bitsThe radiotap parser is currently only used with the radiotapnamespace (not with vendor namespaces), but if the undefinedfield 18 is used, the alignment/size is unknown as well. Inthis case, iterator->_next_ns_data isn't initialized (it'sonly set for skipping vendor namespaces), and syzbot pointsout that we later compare against this uninitialized value.Fix this by moving the rejection of unknown radiotap fieldsdown to after the in-namespace lookup, so it will really useiterator->_next_ns_data only for vendor namespaces, even incase undefined fields are present.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: act_ife: Fix metalist update behaviorWhenever an ife action replace changes the metalist, instead ofreplacing the old data on the metalist, the current ife code is appendingthe new metadata. Aside from being innapropriate behavior, this may leadto an unbounded addition of metadata to the metalist which might cause anout of bounds error when running the encode op:[ 138.423369][ C1] ==================================================================[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011[ 138.425800][ C1] Call Trace:[ 138.425804][ C1] [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)To solve this issue, fix the replace behavior by adding the metalist tothe ife rcu data structure.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Squashfs: check metadata block offset is within rangeSyzkaller reports a "general protection fault in squashfs_copy_data"This is ultimately caused by a corrupted index look-up table, whichproduces a negative metadata block offset.This is subsequently passed to squashfs_copy_data (viasquashfs_read_metadata) where the negative offset causes an out of boundsaccess.The fix is to check that the offset is within range insquashfs_read_metadata. This will trap this and other cases.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_h323: check for zero length in DecodeQ931()In DecodeQ931(), the UserUserIE code path reads a 16-bit length fromthe packet, then decrements it by 1 to skip the protocol discriminatorbyte before passing it to DecodeH323_UserInformation(). If the encodedlength is 0, the decrement wraps to -1, which is then passed as alarge value to the decoder, leading to an out-of-bounds read.Add a check to ensure len is positive after the decrement.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_ecm: Fix net_device lifecycle with device_moveThe net_device is allocated during function instance creation andregistered during the bind phase with the gadget device as its sysfsparent. When the function unbinds, the parent device is destroyed, butthe net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directoryUse device_move() to reparent the net_device between the gadget devicetree and /sys/devices/virtual across bind and unbind cycles. During thefinal unbind, calling device_move(NULL) moves the net_device to thevirtual device tree before the gadget device is destroyed. On rebinding,device_move() reparents the device back under the new gadget, ensuringproper sysfs topology and power management ordering.To maintain compatibility with legacy composite drivers (e.g., multi.c),the bound flag is used to indicate whether the network device is sharedand pre-registered during the legacy driver's bind phase.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Libgcrypt before 1.12.2 sometimes allows a heap-based buffer overflow and denial of service via crafted ECDH ciphertext to gcry_pk_decrypt.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libgcrypt20 > 0-0 (version in image is 1.10.3-150600.3.9.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()There's issue as follows:...EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117EXT4-fs (mmcblk0p1): This should not happen!! Data will be lostEXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117EXT4-fs (mmcblk0p1): This should not happen!! Data will be lostEXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117EXT4-fs (mmcblk0p1): This should not happen!! Data will be lostEXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117EXT4-fs (mmcblk0p1): This should not happen!! Data will be lostEXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117EXT4-fs (mmcblk0p1): This should not happen!! Data will be lostEXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117EXT4-fs (mmcblk0p1): This should not happen!! Data will be lostEXT4-fs (mmcblk0p1): error count since last fsck: 1EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760...According to the log analysis, blocks are always requested from thecorrupted block group. This may happen as follows:ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return errorext4_lock_group(ac->ac_sb, group); if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable goto out;After commit 9008a58e5dce ("ext4: make the bitmap read routines returnreal error codes") merged, Commit 163a203ddb36 ("ext4: mark block groupas corrupt on block bitmap error") is no real solution for allocatingblocks from corrupted block groups. This is because if'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then'ext4_mb_load_buddy()' may return an error. This means that the blockallocation will fail.Therefore, check block group if corrupted when ext4_mb_load_buddy()returns error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86-64: rename misleadingly named '__copy_user_nocache()' functionThis function was a masterclass in bad naming, for various historicalreasons.It claimed to be a non-cached user copy. It is literally _neither_ ofthose things. It's a specialty memory copy routine that usesnon-temporal stores for the destination (but not the source), and thatdoes exception handling for both source and destination accesses.Also note that while it works for unaligned targets, any unaligned parts(whether at beginning or end) will not use non-temporal stores, sinceonly words and quadwords can be non-temporal on x86.The exception handling means that it _can_ be used for user spaceaccesses, but not on its own - it needs all the normal "start user spaceaccess" logic around it.But typically the user space access would be the source, not thenon-temporal destination. That was the original intention of this,where the destination was some fragile persistent memory target thatneeded non-temporal stores in order to catch machine check exceptionssynchronously and deal with them gracefully.Thus that non-descriptive name: one use case was to copy from user spaceinto a non-cached kernel buffer. However, the existing users are a mixof that intended use-case, and a couple of random drivers that just didthis as a performance tweak.Some of those random drivers then actively misused the user copyingversion (with STAC/CLAC and all) to do kernel copies without ever evencaring about the exception handling, _just_ for the non-temporaldestination.Rename it as a first small step to actually make it halfway sane, andchange the prototype to be more normal: it doesn't take a user pointerunless the caller has done the proper conversion, and the argument sizeis the full size_t (it still won't actually copy more than 4GB in onego, but there's also no reason to silently truncate the size argument inthe caller).Finally, use this now sanely named function in the NTB code, whichmis-used a user copy version (with STAC/CLAC and all) of this interfacedespite it not actually being a user copy at all.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: roccat: fix use-after-free in roccat_report_eventroccat_report_event() iterates over the device->readers list withoutholding the readers_lock. This allows a concurrent roccat_release() toremove and free a reader while it's still being accessed, leading to ause-after-free.Protect the readers list traversal with the readers_lock mutex.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: fix freemap adjustments when adding xattrs to leaf blocksxfs/592 and xfs/794 both trip this assertion in the leaf block freemapadjustment code after ~20 minutes of running on my test VMs: ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t) + xfs_attr3_leaf_hdr_size(leaf));Upon enabling quite a lot more debugging code, I narrowed this down tofsstress trying to set a local extended attribute with namelen=3 andvaluelen=71. This results in an entry size of 80 bytes.At the start of xfs_attr3_leaf_add_work, the freemap looks like this:i 0 base 448 size 0 rhs 448 count 46i 1 base 388 size 132 rhs 448 count 46i 2 base 2120 size 4 rhs 448 count 46firstused = 520where "rhs" is the first byte past the end of the leaf entry array.This is inconsistent -- the entries array ends at byte 448, butfreemap[1] says there's free space starting at byte 388!By the end of the function, the freemap is in worse shape:i 0 base 456 size 0 rhs 456 count 47i 1 base 388 size 52 rhs 456 count 47i 2 base 2120 size 4 rhs 456 count 47firstused = 440Important note: 388 is not aligned with the entries array element sizeof 8 bytes.Based on the incorrect freemap, the name area starts at byte 440, whichis below the end of the entries array! That's why the assertiontriggers and the filesystem shuts down.How did we end up here? First, recall from the previous patch that thefreemap array in an xattr leaf block is not intended to be acomprehensive map of all free space in the leaf block. In other words,it's perfectly legal to have a leaf block with: * 376 bytes in use by the entries array * freemap[0] has [base = 376, size = 8] * freemap[1] has [base = 388, size = 1500] * the space between 376 and 388 is free, but the freemap stopped tracking that some time agoIf we add one xattr, the entries array grows to 384 bytes, andfreemap[0] becomes [base = 384, size = 0]. So far, so good. But if weadd a second xattr, the entries array grows to 392 bytes, and freemap[0]gets pushed up to [base = 392, size = 0]. This is bad, becausefreemap[1] hasn't been updated, and now the entries array and the freespace claim the same space.The fix here is to adjust all freemap entries so that none of themcollide with the entries array. Note that this fix relies on commit2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") andthe previous patch that resets zero length freemap entries to havebase = 0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: delete attr leaf freemap entries when emptyBack in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.sizeunderflow"), Brian Foster observed that it's possible for a smallfreemap at the end of the end of the xattr entries array to experiencea size underflow when subtracting the space consumed by an expansion ofthe entries array. There are only three freemap entries, which meansthat it is not a complete index of all free space in the leaf block.This code can leave behind a zero-length freemap entry with a nonzerobase. Subsequent setxattr operations can increase the base up to thepoint that it overlaps with another freemap entry. This isn't in and ofitself a problem because the code in _leaf_add that finds free spaceignores any freemap entry with zero size.However, there's another bug in the freemap update code in _leaf_add,which is that it fails to update a freemap entry that begins midwaythrough the xattr entry that was just appended to the array. That canresult in the freemap containing two entries with the same base butdifferent sizes (0 for the "pushed-up" entry, nonzero for the entrythat's actually tracking free space). A subsequent _leaf_add can thenallocate xattr namevalue entries on top of the entries array, leading todata loss. But fixing that is for later.For now, eliminate the possibility of confusion by zeroing out the baseof any freemap entry that has zero size. Because the freemap is notintended to be a complete index of free space, a subsequent failure tofind any free space for a new xattr will trigger block compaction, whichregenerates the freemap.It looks like this bug has been in the codebase for quite a long time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:9p/xen: protect xen_9pfs_front_free against concurrent callsThe xenwatch thread can race with other back-end change notificationsand call xen_9pfs_front_free() twice, hitting the observed generalprotection fault due to a double-free. Guard the teardown path so onlyone caller can release the front-end state at a time, preventing thecrash.This is a fix for the following double-free:[ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI[ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none)[ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150[ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42[ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246[ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000[ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000[ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000[ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68[ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040[ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000[ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033[ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660[ 27.052418] Call Trace:[ 27.052420] [ 27.052422] xen_9pfs_front_changed+0x5d5/0x720[ 27.052426] ? xenbus_otherend_changed+0x72/0x140[ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10[ 27.052434] xenwatch_thread+0x94/0x1c0[ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10[ 27.052442] kthread+0xf8/0x240[ 27.052445] ? __pfx_kthread+0x10/0x10[ 27.052449] ? __pfx_kthread+0x10/0x10[ 27.052452] ret_from_fork+0x16b/0x1a0[ 27.052456] ? __pfx_kthread+0x10/0x10[ 27.052459] ret_from_fork_asm+0x1a/0x30[ 27.052463] [ 27.052465] Modules linked in:[ 27.052471] ---[ end trace 0000000000000000 ]---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()The ChipIdea UDC driver can encounter "not page aligned sg buffer"errors when a USB device is reconnected after being disconnectedduring an active transfer. This occurs because _ep_nuke() returnsrequests to the gadget layer without properly unmapping DMA buffersor cleaning up scatter-gather bounce buffers.Root cause:When a disconnect happens during a multi-segment DMA transfer, therequest's num_mapped_sgs field and sgt.sgl pointer remain set withstale values. The request is returned to the gadget driver with status-ESHUTDOWN but still has active DMA state. If the gadget driver reusesthis request on reconnect without reinitializing it, the stale DMAstate causes _hardware_enqueue() to skip DMA mapping (seeing non-zeronum_mapped_sgs) and attempt to use freed/invalid DMA addresses,leading to alignment errors and potential memory corruption.The normal completion path via _hardware_dequeue() properly callsusb_gadget_unmap_request_by_dev() and sglist_do_debounce() beforereturning the request. The _ep_nuke() path must do the same cleanupto ensure requests are returned in a clean, reusable state.Fix:Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirrorthe cleanup sequence in _hardware_dequeue():- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set- Call sglist_do_debounce() with copy=false if bounce buffer existsThis ensures that when requests are returned due to endpoint shutdown,they don't retain stale DMA mappings. The 'false' parameter tosglist_do_debounce() prevents copying data back (appropriate forshutdown path where transfer was aborted).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:slip: bound decode() reads against the compressed packet lengthslhc_uncompress() parses a VJ-compressed TCP header by advancing apointer through the packet via decode() and pull16(). Neither helperbounds-checks against isize, and decode() masks its return with& 0xffff so it can never return the -1 that callers test for -- thoseerror paths are dead code.A short compressed frame whose change byte requests optional fieldslets decode() read past the end of the packet. The over-read bytesare folded into the cached cstate and reflected into subsequentreconstructed packets.Make decode() and pull16() take the packet end pointer and return -1when exhausted. Add a bounds check before the TCP-checksum read.The existing == -1 tests now do what they were always meant to.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: cpcap-battery: Fix use-after-free in power_supply_changed()Using the `devm_` variant for requesting IRQ _before_ the `devm_`variant for allocating/registering the `power_supply` handle, means thatthe `power_supply` handle will be deallocated/unregistered _before_ theinterrupt handler (since `devm_` naturally deallocates in reverseallocation order). This means that during removal, there is a racecondition where an interrupt can fire just _after_ the `power_supply`handle has been freed, *but* just _before_ the correspondingunregistration of the IRQ handler has run.This will lead to the IRQ handler calling `power_supply_changed()` witha freed `power_supply` handle. Which usually crashes the system orotherwise silently corrupts the memory...Note that there is a similar situation which can also happen during`probe()`; the possibility of an interrupt firing _before_ registeringthe `power_supply` handle. This would then lead to the nasty situationof using the `power_supply` handle *uninitialized* in`power_supply_changed()`.Fix this racy use-after-free by making sure the IRQ is requested _after_the registration of the `power_supply` handle.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Clear Present bit before tearing down PASID entryThe Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64bytes). When tearing down an entry, the current implementation zeros theentire 64-byte structure immediately using multiple 64-bit writes.Since the IOMMU hardware may fetch these 64 bytes using multipleinternal transactions (e.g., four 128-bit bursts), updating or zeroingthe entire entry while it is active (P=1) risks a "torn" read. If ahardware fetch occurs simultaneously with the CPU zeroing the entry, thehardware could observe an inconsistent state, leading to unpredictablebehavior or spurious faults.Follow the "Guidance to Software for Invalidations" in the VT-d spec(Section 6.5.3.3) by implementing the recommended ownership handshake:1. Clear only the 'Present' (P) bit of the PASID entry.2. Use a dma_wmb() to ensure the cleared bit is visible to hardware before proceeding.3. Execute the required invalidation sequence (PASID cache, IOTLB, and Device-TLB flush) to ensure the hardware has released all cached references.4. Only after the flushes are complete, zero out the remaining fields of the PASID entry.Also, add a dma_wmb() in pasid_set_present() to ensure that all otherfields of the PASID entry are visible to the hardware before the Presentbit is set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: bq256xx: Fix use-after-free in power_supply_changed()Using the `devm_` variant for requesting IRQ _before_ the `devm_`variant for allocating/registering the `power_supply` handle, means thatthe `power_supply` handle will be deallocated/unregistered _before_ theinterrupt handler (since `devm_` naturally deallocates in reverseallocation order). This means that during removal, there is a racecondition where an interrupt can fire just _after_ the `power_supply`handle has been freed, *but* just _before_ the correspondingunregistration of the IRQ handler has run.This will lead to the IRQ handler calling `power_supply_changed()` witha freed `power_supply` handle. Which usually crashes the system orotherwise silently corrupts the memory...Note that there is a similar situation which can also happen during`probe()`; the possibility of an interrupt firing _before_ registeringthe `power_supply` handle. This would then lead to the nasty situationof using the `power_supply` handle *uninitialized* in`power_supply_changed()`.Fix this racy use-after-free by making sure the IRQ is requested _after_the registration of the `power_supply` handle.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: usblp: fix heap leak in IEEE 1284 device ID via short responseusblp_ctrl_msg() collapses the usb_control_msg() return value to0/-errno, discarding the actual number of bytes transferred. A brokenprinter can complete the GET_DEVICE_ID control transfer short and thedriver has no way to know.usblp_cache_device_id_string() reads the 2-byte big-endian length prefixfrom the response and trusts it (clamped only to the buffer bounds).The buffer is kmalloc(1024) at probe time. A device that sends exactlytwo bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leavesdevice_id_string[2..1022] holding stale kmalloc heap.That stale data is then exposed: - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated at the first NUL in the stale heap), and - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full claimed length regardless of NULs, up to 1021 bytes of uninitialized heap, with the leak size chosen by the device.Fix this up by just zapping the buffer with zeros before each requestsent to the device.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFSD: Fix SECINFO_NO_NAME decode error cleanupnfsd4_decode_secinfo_no_name() currently initializes sin_exp afterdecoding sin_style. If the XDR stream is truncated, the decoder returnsnfserr_bad_xdr before sin_exp is initialized.Since commit 3fdc54646234 ("NFSD: Reduce amount of structnfsd4_compoundargs that needs clearing"), the inline iops array is notcleared between RPC calls. A failed SECINFO_NO_NAME decode can thereforeleave sin_exp holding stale union contents from a previous operation.The error response path still invokes nfsd4_secinfo_no_name_release(),which calls exp_put() on a non-NULL sin_exp.Initialize sin_exp before the first failable decode step, matchingnfsd4_decode_secinfo().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tipc: fix slab-use-after-free Read in tipc_aead_decrypt_donetipc_aead_decrypt() goes straight from tipc_bearer_hold(b) tocrypto_aead_decrypt(req) without taking a reference on the netns, unlikethe encrypt path. When crypto_aead_decrypt() is offloaded asynchronously(e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runstipc_aead_decrypt_done() later. If the bearer's netns is torn down in themeantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees theper-netns tipc_crypto, and the completion then reads it:tipc_aead_decrypt_done() dereferences aead->crypto->stats andaead->crypto->net, and tipc_crypto_rcv_complete() dereferencesaead->crypto->aead[] and the node table -- reading freed memory.Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436)This is the same class of bug that commit e279024617134 ("net/tipc: fixslab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encryptside. The encrypt path takes maybe_get_net(aead->crypto->net) beforecrypto_aead_encrypt() and drops it with put_net() on the synchronousreturn paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSYreturn keeps the reference for the async callback to release. The decryptpath was left without the equivalent guard.Mirror the encrypt-side fix on the decrypt path: take a net referencebefore crypto_aead_decrypt() (failing with -ENODEV and the matchingbearer put if it cannot be acquired), keep it across the-EINPROGRESS/-EBUSY async return, and drop it with put_net() on thesynchronous success/error return and at the end oftipc_aead_decrypt_done().Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key isflooded with crafted encrypted frames from an unknown peer (driving thecluster-key decrypt path) while the bearer's netns is repeatedly torndown. The completion must run asynchronously to outlivetipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decryptssynchronously, so the async path was exercised via cryptd offload. Theunguarded aead->crypto dereference in tipc_aead_decrypt_done() is theunpatched upstream path; tipc_aead_decrypt() still lacksmaybe_get_net(aead->crypto->net), so the completion can outlive the freeon any config where crypto_aead_decrypt() goes async.Found by 0sec automated security-research tooling (https://0sec.ai).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: buffer: hw-consumer: fix use-after-free in error pathIn the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the codewas using list_for_each_entry() to iterate through buffers while callingiio_buffer_put() which can free the current buffer if refcount drops to 0.The list_for_each_entry() loop macro then evaluates buf->head.next tocontinue iteration, accessing the freed buffer.Fix this by using list_for_each_entry_safe().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: legousbtower: fix use-after-free on disconnect racemutex_unlock() may access the mutex structure after releasing the lockand therefore cannot be used to manage lifetime of objects directly(unlike spinlocks and refcounts). [1][2]Use a kref to release the driver data to avoid use-after-free inmutex_unlock() when release() races with disconnect().[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: idmouse: fix use-after-free on disconnect racemutex_unlock() may access the mutex structure after releasing the lockand therefore cannot be used to manage lifetime of objects directly(unlike spinlocks and refcounts). [1][2]Use a kref to release the driver data to avoid use-after-free inmutex_unlock() when release() races with disconnect().[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: fix memory leak in mlx5e_ptp_openWhen kvzalloc_node or kvzalloc failed in mlx5e_ptp_open, the memorypointed by "c" or "cparams" is not freed, which can lead to a memoryleak. Fix by freeing the array in the error path.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in p11-kit. The RPC message attribute parsing functions p11_rpc_message_get_attribute() and p11_rpc_message_get_attribute_array_value() form a mutually-recursive call chain with no recursion depth limit when processing nested CKA_WRAP_TEMPLATE, CKA_UNWRAP_TEMPLATE, and CKA_DERIVE_TEMPLATE attributes. An unauthenticated attacker with local access to the p11-kit RPC Unix domain socket can send a specially crafted request with deeply nested template attributes, causing stack exhaustion and crashing the p11-kit server process and its dependent services.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libp11-kit0 > 0-0 (version in image is 0.23.22-150500.8.3.1).
Description: libusb before version 1.0.30 contains a NULL pointer dereference vulnerability that allows attackers to crash applications by supplying a malformed USB configuration descriptor where an interface claims bNumEndpoints greater than zero but is followed by a class-specific descriptor whose bLength exceeds the remaining buffer size, causing parse_interface() to return early without allocating the endpoint array. Attackers can exploit this flaw through libusb_get_active_config_descriptor or libusb_get_config_descriptor by providing crafted descriptors via virtualized USB passthrough, file-based descriptor parsing, or network sources, causing any application iterating over endpoints to dereference a NULL endpoint pointer and crash.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libusb-1_0-0 > 0-0 (version in image is 1.0.24-150400.3.3.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: ns: Limit the maximum server registration per nodeCurrent code does no bound checking on the number of servers added pernode. A malicious client can flood NEW_SERVER messages and exhaust memory.Fix this issue by limiting the maximum number of server registrations to256 per node. If the NEW_SERVER message is received for an old port, thendon't restrict it as it will get replaced. While at it, also rate limitthe error messages in the failure path of qrtr_ns_worker().Note that the limit of 256 is chosen based on the current platformrequirements. If requirement changes in the future, this limit can beincreased.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: caif: clear client service pointer on teardown`caif_connect()` can tear down an existing client after remote shutdown bycalling `caif_disconnect_client()` followed by `caif_free_client()`.`caif_free_client()` releases the service layer referenced by`adap_layer->dn`, but leaves that pointer stale.When the socket is later destroyed, `caif_sock_destructor()` calls`caif_free_client()` again and dereferences the freed service pointer.Clear the client/service links before releasing the service object sorepeated teardown becomes harmless.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: validate bg_bits during freefrag scan[BUG]A crafted filesystem can trigger an out-of-bounds bitmap walk whenOCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xd1/0x650 mm/kasan/report.c:482 kasan_report+0xfb/0x140 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 [inline] kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200 __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] test_bit_le include/asm-generic/bitops/le.h:21 [inline] ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline] ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline] ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754 ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828 ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 ...[CAUSE]ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as thebitmap scan limit. The coherent path reads group descriptors throughocfs2_read_group_descriptor(), which validates the descriptor beforeuse. The non-coherent path uses ocfs2_read_blocks_sync() instead andskips that validation, so an impossible bg_bits value can drive thebitmap walk past the end of the block.[FIX]Compute the bitmap capacity from the filesystem format withocfs2_group_bitmap_size(), report descriptors whose bg_bits exceedsthat limit, and clamp the scan to the computed capacity. This keeps thefreefrag report going while avoiding reads beyond the buffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addrnfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of anetaddr4 from a GETDEVICEINFO multipath-DS body, then immediatelycalls strrchr(buf, '.') to locate the port separator. Both decodesuse xdr_stream_decode_string_dup(), and the current code checks only"nlen < 0" / "rlen < 0" before dereferencing the returned string.When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline()returns 0 and xdr_stream_decode_string_dup() falls through to its"*str = NULL; return ret" tail, leaving buf NULL with a return valueof 0. The "< 0" check does not catch this, and the next line isstrrchr(NULL, '.'), a kernel NULL pointer dereference reachable fromany pNFS-flexfile client mounted against a malicious or compromisedmetadata server.Reject the zero-length cases explicitly so the decoder fails with-EBADMSG (treated as a malformed GETDEVICEINFO body) instead ofpanicking the client.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hwmon: (pmbus/adm1266) reject implausible blackbox record_countadm1266_nvmem_read_blackbox() loops over a record_count that comesstraight from byte 3 of the BLACKBOX_INFO response. The destinationbuffer is data->dev_mem, sized for the nvmem cell's declared 2048bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64).A device that reports a record_count greater than 32 -- whether dueto firmware bugs, bus corruption, or a non-responsive slave returning0xff -- would walk read_buff past the end of the dev_mem allocationon the trailing iterations.Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here)before entering the loop and return -EIO on any larger value, so amalformed BLACKBOX_INFO response cannot drive the loop out of bounds.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Parsing arbitrary HTML which is then rendered using Render can result in an unexpected HTML tree. This can be leveraged to execute XSS attacks in applications that attempt to sanitize input HTML before rendering.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: Parsing arbitrary HTML which is then rendered using Render can result in an unexpected HTML tree. This can be leveraged to execute XSS attacks in applications that attempt to sanitize input HTML before rendering.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: Parsing arbitrary HTML which is then rendered using Render can result in an unexpected HTML tree. This can be leveraged to execute XSS attacks in applications that attempt to sanitize input HTML before rendering.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: Parsing arbitrary HTML which is then rendered using Render can result in an unexpected HTML tree. This can be leveraged to execute XSS attacks in applications that attempt to sanitize input HTML before rendering.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validationEach attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be astruct ifla_vf_vlan_info so the size of such attribute needs to be at leastof sizeof(struct ifla_vf_vlan_info) which is 14 bytes.The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)which is less than sizeof(struct ifla_vf_vlan_info) so this validationis not enough and a too small attribute might be cast to astruct ifla_vf_vlan_info, this might result in an out of bandsread access when accessing the saved (casted) entry in ivvl.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix crash on racing fsync and size-extending write into preallocWe have been seeing crashes on duplicate keys inbtrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)So we're logging a changed extent from fsync, which is splitting anextent in the log tree. But this split part already exists in the tree,triggering the BUG().This is the state of the log tree at the time of the crash, dumped withdrgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ...So the real problem happened earlier: notice that items 4 (4k-12k) and 5(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size anditem 5 starts at i_size.Here is the state of ---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drivers/perf: hisi: hns3: Fix out-of-bound access when valid event groupThe perf tool allows users to create event groups through followingcmd [1], but the driver does not check whether the array index is outof bounds when writing data to the event_group array. If the number ofevents in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, thememory write overflow of event_group array occurs.Add array index check to fix the possible array out of bounds violation,and return directly when write new events are written to array bounds.There are 9 different events in an event_group.[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drivers/perf: hisi_pcie: Fix out-of-bound access when valid event groupThe perf tool allows users to create event groups through followingcmd [1], but the driver does not check whether the array index is out ofbounds when writing data to the event_group array. If the number of eventsin an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory writeoverflow of event_group array occurs.Add array index check to fix the possible array out of bounds violation,and return directly when write new events are written to array bounds.There are 9 different events in an event_group.[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}'
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: stmmac: move the EST lock to struct stmmac_privReinitialize the whole EST structure would also reset the mutexlock which is embedded in the EST structure, and then triggerthe following warning. To address this, move the lock to structstmmac_priv. We also need to reacquire the mutex lock when doingthis initialization.DEBUG_LOCKS_WARN_ON(lock->magic != lock)WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in util-linux. This vulnerability allows a heap buffer overread when processing 256-byte usernames, specifically within the `setpwnam()` function, affecting SUID (Set User ID) login-utils utilities writing to the password database.
Packages affected:
- sle-module-server-applications-release == 15.6 (version in image is 15.6-150600.37.2).
- util-linux > 0-0 (version in image is 2.39.3-150600.4.21.1).
Description: In the Linux kernel, the following vulnerability has been resolved:parisc: Revise __get_user() to probe user read accessBecause of the way read access support is implemented, read accessinterruptions are only triggered at privilege levels 2 and 3. Thekernel executes at privilege level 0, so __get_user() never triggersa read access interruption (code 26). Thus, it is currently possiblefor user code to access a read protected address via a system call.Fix this by probing read access rights at privilege level 3 (PRIV_USER)and setting __gu_err to -EFAULT (-14) if access isn't allowed.Note the cmpiclr instruction does a 32-bit compare because COND macrodoesn't work inside asm.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: target_core_configfs: Add length check to avoid buffer overflowA buffer overflow arises from the usage of snprintf to write into thebuffer "buf" in target_lu_gp_members_show function located in/drivers/target/target_core_configfs.c. This buffer is allocated withsize LU_GROUP_NAME_BUF (256 bytes).snprintf(...) formats multiple strings into buf with the HBA name(hba->hba_group.cg_item), a slash character, a devicename (dev->dev_group.cg_item) and a newline character, the total formatted stringlength may exceed the buffer size of 256 bytes.Since snprintf() returns the total number of bytes that would have beenwritten (the length of %s/%sn ), this value may exceed the buffer length(256 bytes) passed to memcpy(), this will ultimately cause functionmemcpy reporting a buffer overflow error.An additional check of the return value of snprintf() can avoid thisbuffer overflow.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: use RCU in ip6_xmit()Use RCU in ip6_xmit() in order to use dst_dev_rcu() to preventpossible UAF.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: guard against EA inode refcount underflow in xattr updatesyzkaller found a path where ext4_xattr_inode_update_ref() reads an EAinode refcount that is already <= 0 and then applies ref_change (often-1). That lets the refcount underflow and we proceed with a bogus value,triggering errors like: EXT4-fs error: EA inode ref underflow: ref_count=-1 ref_change=-1 EXT4-fs warning: ea_inode dec ref err=-117Make the invariant explicit: if the current refcount is non-positive,treat this as on-disk corruption, emit ext4_error_inode(), and fail theoperation with -EFSCORRUPTED instead of updating the refcount. Delete theWARN_ONCE() as negative refcounts are now impossible; keep error reportingin ext4_error_inode().This prevents the underflow and the follow-on orphan/cleanup churn.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: fix crash in set_mesh_sync and set_mesh_completeThere is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due tomemcpy from badly declared on-stack flexible array.Another crash is in set_mesh_complete() due to double list_del viamgmt_pending_valid + mgmt_pending_remove.Use DEFINE_FLEX to declare the flexible array right, and don't memcpyoutside bounds.As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free,and also report status on error.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fuse: fix livelock in synchronous file put from fuseblk workersI observed a hang when running generic/323 against a fuseblk server.This test opens a file, initiates a lot of AIO writes to that filedescriptor, and closes the file descriptor before the writes complete.Unsurprisingly, the AIO exerciser threads are mostly stuck waiting forresponses from the fuseblk server:# cat /proc/372265/task/372313/stack[<0>] request_wait_answer+0x1fe/0x2a0 [fuse][<0>] __fuse_simple_request+0xd3/0x2b0 [fuse][<0>] fuse_do_getattr+0xfc/0x1f0 [fuse][<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse][<0>] aio_read+0x130/0x1e0[<0>] io_submit_one+0x542/0x860[<0>] __x64_sys_io_submit+0x98/0x1a0[<0>] do_syscall_64+0x37/0xf0[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53But the /weird/ part is that the fuseblk server threads are waiting forresponses from itself:# cat /proc/372210/task/372232/stack[<0>] request_wait_answer+0x1fe/0x2a0 [fuse][<0>] __fuse_simple_request+0xd3/0x2b0 [fuse][<0>] fuse_file_put+0x9a/0xd0 [fuse][<0>] fuse_release+0x36/0x50 [fuse][<0>] __fput+0xec/0x2b0[<0>] task_work_run+0x55/0x90[<0>] syscall_exit_to_user_mode+0xe9/0x100[<0>] do_syscall_64+0x43/0xf0[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53The fuseblk server is fuse2fs so there's nothing all that exciting inthe server itself. So why is the fuse server calling fuse_file_put?The commit message for the fstest sheds some light on that:"By closing the file descriptor before calling io_destroy, you prettymuch guarantee that the last put on the ioctx will be done in interruptcontext (during I/O completion).Aha. AIO fgets a new struct file from the fd when it queues the ioctx.The completion of the FUSE_WRITE command from userspace causes the fuseserver to call the AIO completion function. The completion puts thestruct file, queuing a delayed fput to the fuse server task. When thefuse server task returns to userspace, it has to run the delayed fput,which in the case of a fuseblk server, it does synchronously.Sending the FUSE_RELEASE command sychronously from fuse server threadsis a bad idea because a client program can initiate enough simultaneousAIOs such that all the fuse server threads end up in delayed_fput, andnow there aren't any threads left to handle the queued fuse commands.Fix this by only using asynchronous fputs when closing files, and leavea comment explaining why.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in the libblkid library of util-linux. During nested partition probing, the BSD, Minix, Solaris x86, and UnixWare partition probers cache a raw pointer to a parent partition entry in a dynamically allocated array. When subsequent partition additions cause the array to be reallocated, this pointer becomes stale, leading to a heap use-after-free read. An attacker who can present a crafted block device image (for example, via USB insertion or a loop-mounted disk image) can trigger this flaw without user interaction, as libblkid is invoked automatically by udev/udisks as root on block-device hot-plug events. This could lead to limited information disclosure or denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libblkid1 > 0-0 (version in image is 2.39.3-150600.4.21.1).
Description: A flaw was found in samba's pam_winbind. When mkhomedir is enabled, pam_winbind chowns the target account's home directory without validating the path is not a critical system directory such as /. On affected systems, accounts with / as their home directory (a common default for system accounts) can have this triggered not only by root, but by a non-root user holding a narrow sudo delegation to run commands as that account, causing ownership of / to change and resulting in severe denial of service (SSH, sudo, and package-manager failures). The change does not grant write access to / (which ships with restrictive 0555 permissions on RHEL), so the impact is availability loss rather than further privilege escalation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- samba-client-libs < 4.19.8+git.501.67274891bc-150600.3.29.1 (version in image is 4.19.8+git.473.51d12fd320c-150600.3.26.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: avoid kernel-infoleak from struct iw_pointstruct iw_point has a 32bit hole on 64bit arches.struct iw_point { void __user *pointer; /* Pointer to the data (in user space) */ __u16 length; /* number of fields or size in bytes */ __u16 flags; /* Optional params */};Make sure to zero the structure to avoid disclosing 32bits of kernel datato user space.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovecnvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDUlength or offset exceeds sg_cnt and then use bogus sg->length/offsetvalues, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remainingentries, and sg->length/offset before building the bvec.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mtd: rawnand: serialize lock/unlock against other NAND operationsnand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_areawithout holding the NAND device lock. On controllers that implementSET_FEATURES via multiple low-level PIO commands, these can race withconcurrent UBI/UBIFS background erase/write operations that hold thedevice lock, resulting in cmd_pending conflicts on the NAND controller.Add nand_get_device()/nand_release_device() around the lock/unlockoperations to serialize them against all other NAND controller access.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds checkThe same bounds-check bug fixed for NDP16 in the previous patch alsoexists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validatedagainst the total skb length without accounting for ndpoffset, allowingout-of-bounds reads when the NDP32 is placed near the end of the NTB.Add ndpoffset to the nframes bounds check and use struct_size_t() toexpress the NDP-plus-DPE-array size more clearly.Compile-tested only.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds checkcdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPEentries fit within the skb. The first check correctly accounts forndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)This validates the DPE array size against the total skb length as ifthe NDP were at offset 0, rather than at ndpoffset. When the NDP isplaced near the end of the NTB (large wNdpIndex), the DPE entries canextend past the skb data buffer even though the check passes.cdc_ncm_rx_fixup() then reads out-of-bounds memory when iteratingthe DPE array.Add ndpoffset to the nframes bounds check and use struct_size_t() toexpress the NDP-plus-DPE-array size more clearly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: log new dentries when logging parent dir of a conflicting inodeIf we log the parent directory of a conflicting inode, we are not loggingthe new dentries of the directory, so when we finish we have the parentdirectory's inode marked as logged but we did not log its new dentries.As a consequence if the parent directory is explicitly fsynced later andit does not have any new changes since we logged it, the fsync is a no-opand after a power failure the new dentries are missing.Example scenario: $ mkdir foo $ sync $rmdir foo $ mkdir dir1 $ mkdir dir2 # A file with the same name and parent as the directory we just deleted # and was persisted in a past transaction. So the deleted directory's # inode is a conflicting inode of this new file's inode. $ touch foo $ ln foo dir2/link # The fsync on dir2 will log the parent directory (".") because the # conflicting inode (deleted directory) does not exists anymore, but it # it does not log its new dentries (dir1). $ xfs_io -c "fsync" dir2 # This fsync on the parent directory is no-op, since the previous fsync # logged it (but without logging its new dentries). $ xfs_io -c "fsync" .
# After log replay dir1 is missing.Fix this by ensuring we log new dir dentries whenever we log the parentdirectory of a no longer existing conflicting inode.A test case for fstests will follow soon.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix krb5 mount with username optionCustomer reported that some of their krb5 mounts were failing againsta single server as the client was trying to mount the shares withwrong credentials. It turned out the client was reusing SMB sessionfrom first mount to try mounting the other shares, even though adifferent username= option had been specified to the other mounts.By using username mount option along with sec=krb5 to search forprincipals from keytab is supported by cifs.upcall(8) sincecifs-utils-4.8. So fix this by matching username mount option inmatch_session() even with Kerberos.For example, the second mount below should fail with -ENOKEY as thereis no 'foobar' principal in keytab (/etc/krb5.keytab). The clientends up reusing SMB session from first mount to perform the secondone, which is wrong.```$ ktutilktutil: add_entry -password -p testuser -k 1 -e aes256-ctsPassword for testuser@ZELDA.TEST:ktutil: write_kt /etc/krb5.keytabktutil: quit$ klist -keKeytab name: FILE:/etc/krb5.keytabKVNO Principal ---- ---------------------------------------------------------------- 1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar$ mount -t cifs | grep -Po 'username=\K\w+'testusertestuser```
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: macb: fix use-after-free access to PTP clockPTP clock is registered on every opening of the interface and destroyed onevery closing. However it may be accessed via get_ts_info ethtool callwhich is possible while the interface is just present in the kernel.BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426Read of size 4 at addr ffff8880194345cc by task syz.0.6/948CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106 print_address_description mm/kasan/report.c:316 [inline] print_report+0x17f/0x496 mm/kasan/report.c:420 kasan_report+0xd9/0x180 mm/kasan/report.c:524 ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349 macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371 __ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558 ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline] __dev_ethtool net/ethtool/ioctl.c:3017 [inline] dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095 dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510 sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215 sock_ioctl+0x577/0x6d0 net/socket.c:1320 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 457: kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:699 [inline] ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235 gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375 macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920 __dev_open+0x2ce/0x500 net/core/dev.c:1501 __dev_change_flags+0x56a/0x740 net/core/dev.c:8651 dev_change_flags+0x92/0x170 net/core/dev.c:8722 do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833 __rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608 rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655 rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150 netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x14b/0x180 net/socket.c:730 __sys_sendto+0x320/0x3b0 net/socket.c:2152 __do_sys_sendto net/socket.c:2164 [inline] __se_sys_sendto net/socket.c:2160 [inline] __x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8Freed by task 938: kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1729 [inline] slab_free_freelist_hook mm/slub.c:1755 [inline] slab_free mm/slub.c:3687 [inline] __kmem_cache_free+0xbc/0x320 mm/slub.c:3700 device_release+0xa0/0x240 drivers/base/core.c:2507 kobject_cleanup lib/kobject.c:681 [inline] kobject_release lib/kobject.c:712 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1cd/0x350 lib/kobject.c:729 put_device+0x1b/0x30 drivers/base/core.c:3805 ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391 gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404 macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966 __dev_close_many+0x1b9/0x310 net/core/dev.c:1585 __dev_close net/core/dev.c:1597 [inline] __dev_change_flags+0x2bb/0x740 net/core/dev.c:8649 dev_change_fl---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:X.509: Fix out-of-bounds access when parsing extensionsLeo reports an out-of-bounds access when parsing a certificate withempty Basic Constraints or Key Usage extension because the first byte ofthe extension is read before checking its length. Fix it.The bug can be triggered by an unprivileged user by submitting aspecially crafted certificate to the kernel through the keyrings(7) API.Leo has demonstrated this with a proof-of-concept program responsiblydisclosed off-list.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udp: Fix wildcard bind conflict check when using hash2When binding a udp_sock to a local address and port, UDP usestwo hashes (udptable->hash and udptable->hash2) for collisiondetection. The current code switches to "hash2" whenhslot->count > 10."hash2" is keyed by local address and local port."hash" is keyed by local port only.The issue can be shown in the following bind sequence (pseudo code):bind(fd1, "[fd00::1]:8888")bind(fd2, "[fd00::2]:8888")bind(fd3, "[fd00::3]:8888")bind(fd4, "[fd00::4]:8888")bind(fd5, "[fd00::5]:8888")bind(fd6, "[fd00::6]:8888")bind(fd7, "[fd00::7]:8888")bind(fd8, "[fd00::8]:8888")bind(fd9, "[fd00::9]:8888")bind(fd10, "[fd00::10]:8888")/* Correctly return -EADDRINUSE because "hash" is used * instead of "hash2". udp_lib_lport_inuse() detects the * conflict. */bind(fail_fd, "[::]:8888")/* After one more socket is bound to "[fd00::11]:8888", * hslot->count exceeds 10 and "hash2" is used instead. */bind(fd11, "[fd00::11]:8888")bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */The same issue applies to the IPv4 wildcard address "0.0.0.0"and the IPv4-mapped wildcard address "::ffff:0.0.0.0". Forexample, if there are existing sockets bound to"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or"[::ffff:0.0.0.0]:8888" can also miss the conflict whenhslot->count > 10.TCP inet_csk_get_port() already has the correct check ininet_use_bhash2_on_bind(). Rename it toinet_use_hash2_on_bind() and move it to inet_hashtables.hso udp.c can reuse it in this fix.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: vidtv: fix nfeeds state corruption on start_streaming failuresyzbot reported a memory leak in vidtv_psi_service_desc_init [1].When vidtv_start_streaming() fails inside vidtv_start_feed(), thenfeeds counter is left incremented even though no feed was actuallystarted. This corrupts the driver state: subsequent start_feed callssee nfeeds > 1 and skip starting the mux, while stop_feed callseventually try to stop a non-existent stream.This state corruption can also lead to memory leaks, since the muxand channel resources may be partially allocated during a failedstart_streaming but never cleaned up, as the stop path findsdvb->streaming == false and returns early.Fix by decrementing nfeeds back when start_streaming fails, keepingthe counter in sync with the actual number of active feeds.[1]BUG: memory leakunreferenced object 0xffff888145b50820 (size 32): comm "syz.0.17", pid 6068, jiffies 4294944486 backtrace (crc 90a0c7d4): vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288 vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83 vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524 vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline] vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_hid: don't call cdev_init while cdev in useWhen calling unbind, then bind again, cdev_init reinitialized the cdev,even though there may still be references to it. That's the case whenthe /dev/hidg* device is still opened. This obviously unsafe behaviorlike oopes.This fixes this by using cdev_alloc to put the cdev on the heap. Thatway, we can simply allocate a new one in hidg_bind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()The block_len read from the host-supplied NTB header is checked againstntb_max but has no lower bound. When block_len is smaller thanopts->ndp_size, the bounds check of: ndp_index > (block_len - opts->ndp_size)will underflow producing a huge unsigned value that ndp_index can neverexceed, defeating the check entirely.The same underflow occurs in the datagram index checks against block_len- opts->dpe_size. With those checks neutered, a malicious USB host canchoose ndp_index and datagram offsets that point past the actualtransfer, and the skb_put_data() copies adjacent kernel memory into thenetwork skb.Fix this by rejecting block lengths that cannot hold at least the NTBheader plus one NDP. This will make block_len - opts->ndp_size andblock_len - opts->dpe_size both well-defined.Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixeda related class of issues on the host side of NCM.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: fireworks: bound device-supplied status before string array lookupThe status field in an EFW response is a 32-bit value supplied by thefirewire device. efr_status_names[] has 17 entries so a status valueoutside that range goes off into the weeds when looking at the %s value.Even worse, the status could return EFR_STATUS_INCOMPLETE which is0x80000000, and is obviously not in that array of potential strings.Fix this up by properly bounding the index against the array size andprinting "unknown" if it's not recognized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_rndis: Fix net_device lifecycle with device_moveThe net_device is allocated during function instance creation andregistered during the bind phase with the gadget device as its sysfsparent. When the function unbinds, the parent device is destroyed, butthe net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directoryUse device_move() to reparent the net_device between the gadget devicetree and /sys/devices/virtual across bind and unbind cycles. During thefinal unbind, calling device_move(NULL) moves the net_device to thevirtual device tree before the gadget device is destroyed. On rebinding,device_move() reparents the device back under the new gadget, ensuringproper sysfs topology and power management ordering.To maintain compatibility with legacy composite drivers (e.g., multi.c),the borrowed_net flag is used to indicate whether the network device isshared and pre-registered during the legacy driver's bind phase.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_subset: Fix net_device lifecycle with device_moveThe net_device is allocated during function instance creation andregistered during the bind phase with the gadget device as its sysfsparent. When the function unbinds, the parent device is destroyed, butthe net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directoryUse device_move() to reparent the net_device between the gadget devicetree and /sys/devices/virtual across bind and unbind cycles. During thefinal unbind, calling device_move(NULL) moves the net_device to thevirtual device tree before the gadget device is destroyed. On rebinding,device_move() reparents the device back under the new gadget, ensuringproper sysfs topology and power management ordering.To maintain compatibility with legacy composite drivers (e.g., multi.c),the bound flag is used to indicate whether the network device is sharedand pre-registered during the legacy driver's bind phase.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_eem: Fix net_device lifecycle with device_moveThe net_device is allocated during function instance creation andregistered during the bind phase with the gadget device as its sysfsparent. When the function unbinds, the parent device is destroyed, butthe net_device survives, resulting in dangling sysfs symlinks:console:/ # ls -l /sys/class/net/usb0lrwxrwxrwx ... /sys/class/net/usb0 ->/sys/devices/platform/.../gadget.0/net/usb0console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0ls: .../gadget.0/net/usb0: No such file or directoryUse device_move() to reparent the net_device between the gadget devicetree and /sys/devices/virtual across bind and unbind cycles. During thefinal unbind, calling device_move(NULL) moves the net_device to thevirtual device tree before the gadget device is destroyed. On rebinding,device_move() reparents the device back under the new gadget, ensuringproper sysfs topology and power management ordering.To maintain compatibility with legacy composite drivers (e.g., multi.c),the bound flag is used to indicate whether the network device is sharedand pre-registered during the legacy driver's bind phase.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: caiaq: fix stack out-of-bounds read in init_cardThe loop creates a whitespace-stripped copy of the card shortnamewhere `len < sizeof(card->id)` is used for the bounds check. Sincesizeof(card->id) is 16 and the local id buffer is also 16 bytes,writing 16 non-space characters fills the entire buffer,overwriting the terminating nullbyte.When this non-null-terminated string is later passed tosnd_card_set_id() -> copy_valid_id_string(), the function scansforward with `while (*nid && ...)` and reads past the end of thestack buffer, reading the contents of the stack.A USB device with a product name containing many non-ASCII, non-spacecharacters (e.g. multibyte UTF-8) will reliably trigger this as follows: BUG: KASAN: stack-out-of-bounds in copy_valid_id_string sound/core/init.c:696 [inline] BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c sound/core/init.c:718The off-by-one has been present since commit bafeee5b1f8d ("ALSA:snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),which first introduced this whitespace-stripping loop. The originalcode never accounted for the null terminator when bounding the copy.Fix this by changing the loop bound to `sizeof(card->id) - 1`,ensuring at least one byte remains as the null terminator.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in GNU Binutils. This heap-based buffer overflow vulnerability, specifically an out-of-bounds read in the bfd linker, allows an attacker to gain access to sensitive information. By convincing a user to process a specially crafted XCOFF object file, an attacker can trigger this flaw, potentially leading to information disclosure or an application level denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: A flaw was found in GNU Binutils. This vulnerability, a heap-based buffer overflow, specifically an out-of-bounds read, exists in the bfd linker component. An attacker could exploit this by convincing a user to process a specially crafted malicious XCOFF object file. Successful exploitation may lead to the disclosure of sensitive information or cause the application to crash, resulting in an application level denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: jq is a command-line JSON processor. In commits before 2f09060afab23fe9390cce7cb860b10416e1bf5f, the jv_parse_sized() API in libjq accepts a counted buffer with an explicit length parameter, but its error-handling path formats the input buffer using %s in jv_string_fmt(), which reads until a NUL terminator is found rather than respecting the caller-supplied length. This means that when malformed JSON is passed in a non-NUL-terminated buffer, the error construction logic performs an out-of-bounds read past the end of the buffer. The vulnerability is reachable by any libjq consumer calling jv_parse_sized() with untrusted input, and depending on memory layout, can result in memory disclosure or process termination. The issue has been patched in commit 2f09060afab23fe9390cce7cb860b10416e1bf5f.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: Moby is an open source container framework. In Docker Engine prior to version 29.5.1, Docker Daemon versions 28.5.2 and prior, and Moby Daemon prior to version 2.0.0-beta.14, a race condition during docker cp mount setup allows a malicious container to create empty files or directories at arbitrary absolute paths on the host filesystem. This issue has been patched in Docker Engine version 29.5.1 and Moby Daemon version 2.0.0-beta.14.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: GNU gzip contains a global buffer overflow vulnerability in the LZH decompression logic caused by improper reuse of shared global state between different decompression formats within a single execution. GNU gzip maintains a global array that is shared across the LZ77, LZW, and LZH decompression routines and is not reinitialized between files processed in the same invocation.By decompressing a specially crafted LZW file followed by a specially crafted LZH file in a single gzip -d command, an attacker can poison the shared global state and subsequently trigger an out-of-bounds read in the LZH decoder. The LZH decompression logic follows stale values left in the shared array, causing reads past the end of the allocated global buffer.This issue has been fixed in the commit 63dbf6b3b9e6e781df1a6a64e609b10e23969681
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- gzip > 0-0 (version in image is 1.10-150200.10.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: check tdls flag in ieee80211_tdls_operWhen NL80211_TDLS_ENABLE_LINK is called, the code only checks if thestation exists but not whether it is actually a TDLS station. Thisallows the operation to proceed for non-TDLS stations, causingunintended side effects like modifying channel context and HTprotection before failing.Add a check for sta->sta.tdls early in the ENABLE_LINK case, beforeany side effects occur, to ensure the operation is only allowed foractual TDLS peers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dcache: Limit the minimal number of bucket to twoThere is an OOB read problem on dentry_hashtable when user sets'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_dir+0x1d/0x1c0 pinctrl_init+0x6d/0x140 do_one_initcall+0x6d/0x3d0 kernel_init_freeable+0x39f/0x460 kernel_init+0x2a/0x260There will be only one bucket in dentry_hashtable when dhash_entries isset as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,following process will access more than one buckets(which memory regionis not allocated) in dentry_hashtable: d_lookup b = d_hash(hash) dentry_hashtable + ((u32)hashlen >> d_hash_shift) // The C standard defines the behavior of right shift amounts // exceeding the bit width of the operand as undefined. The // result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen', // so 'b' will point to an unallocated memory region. hlist_bl_for_each_entry_rcu(b) hlist_bl_first_rcu(head) h->first // read OOB!Fix it by limiting the minimal number of dentry_hashtable bucket to two,so that 'd_hash_shift' won't exceeds the bit width of type u32.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handlert7xx_port_enum_msg_handler() uses the modem-supplied port_count field asa loop bound over port_msg->data[] without checking that the message buffercontains sufficient data. A modem sending port_count=65535 in a 12-bytebuffer triggers a slab-out-of-bounds read of up to 262140 bytes.Add a sizeof(*port_msg) check before accessing the port message headerfields to guard against undersized messages.Add a struct_size() check after extracting port_count and before the loop.In t7xx_parse_host_rt_data(), guard the rt_feature header read with aremaining-buffer check before accessing data_len, validate feat_data_lenagainst the actual remaining buffer to prevent OOB reads and signedinteger overflow on offset.Pass msg_len from both call sites: skb->len at the DPMAIF path afterskb_pull(), and the validated feat_data_len at the handshake path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_sendib_uverbs_post_send() uses cmd.wqe_size from userspace without anyvalidation before passing it to kmalloc() and using the allocatedbuffer as struct ib_uverbs_send_wr.If a user provides a small wqe_size value (e.g., 1), kmalloc() willsucceed, but subsequent accesses to user_wr->opcode, user_wr->num_sge,and other fields will read beyond the allocated buffer, resulting inan out-of-bounds read from kernel heap memory. This could potentiallyleak sensitive kernel information to userspace.Additionally, providing an excessively large wqe_size can trigger aWARNING in the memory allocation path, as reported by syzkaller.This is inconsistent with ib_uverbs_unmarshall_recv() which properlyvalidates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) beforeproceeding.Add the same validation for ib_uverbs_post_send() to ensure wqe_sizeis at least sizeof(struct ib_uverbs_send_wr).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid5: validate payload size before accessing journal metadatar5c_recovery_analyze_meta_block() andr5l_recovery_verify_data_checksum_for_mb() iterate over payloads in ajournal metadata block using on-disk payload size fields withoutvalidating them against the remaining space in the metadata block.A corrupted journal contains payload sizes extending beyond the PAGE_SIZEboundary can cause out-of-bounds reads when accessing payload fields orcomputing offsets.Add bounds validation for each payload type to ensure the full payloadfits within meta_size before processing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm-thin: fix metadata refcount underflowThere's a bug in dm-thin in the function rebalance_children. If theinternal btree node has one entry, the code tries to copy all btreeentries from the node's child to the node itself and then decrement thechild's reference count.If the child node is shared (it has reference count > 1), we won't freeit, so there would be two pointers to each of the grandchildren nodes.But the reference counts of the grandchildren is not increased, thus thereference count doesn't match the number of pointers that point to thegrandchildren. This results in "device mapper: space map common: unableto decrement block" errors.Fix this bug by incrementing reference counts on the grandchildren if thebtree node is shared.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: b43: enforce bounds check on firmware key index in b43_rx()The firmware-controlled key index in b43_rx() can exceed the dev->key[]array size (58 entries). The existing B43_WARN_ON is non-enforcing inproduction builds, allowing an out-of-bounds read.Make the B43_WARN_ON check enforcing by dropping the frame when thefirmware returns an invalid key index.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: playstation: Clamp num_touch_reportsA device would never lie about the number of touch reports would it?If it does the loop in dualshock4_parse_report will read off the end ofthe touch_reports array, up to about 2 KiB for the maximum number of 256loop iteraions. The data that is read is emitted via evdev if theDS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this byclamping the num_touch_reports value provided by the device to themaximum size of the touch_reports array.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in the GNU Binutils BFD library, a widely used component for handling binary files such as object files and executables. The issue occurs when processing specially crafted XCOFF object files, where a relocation type value is not properly validated before being used. This can cause the program to read memory outside of intended bounds. As a result, affected tools may crash or expose unintended memory contents, leading to denial-of-service or limited information disclosure risks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: fix fragment reassembly length accountingbatman-adv keeps a running payload length for queued fragments and uses itto validate a fragment chain before reassembly.That accounting currently allows the accumulated fragment length to betruncated during updates. As a result, malformed fragment chains canbypass the intended validation and drive reassembly with inconsistentlength state, leading to a local denial of service.Fix the accounting by storing the accumulated length in a length-typedfield and rejecting update overflows before the existing validation logicruns.The fix was verified against the original reproducer and against validfragment reassembly paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ppp: require CAP_NET_ADMIN in target netns for unattached ioctls/dev/ppp open is currently authorized against file->f_cred->user_ns,while unattached administrative ioctls operate on current->nsproxy->net_ns.As a result, a local unprivileged user can create a new user namespacewith CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace,and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN againstan inherited network namespace.Require CAP_NET_ADMIN in the user namespace that owns the target networknamespace before handling unattached PPP administrative ioctls.This preserves normal pppd operation in the network namespace it isactually privileged in, while rejecting the userns-only inherited-netnscase.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: pull headers in qdisc_pkt_len_segs_init()Most ndo_start_xmit() methods expects headers of gso packetsto be already in skb->head.net/core/tso.c users are particularly at risk, because tso_build_hdr()does a memcpy(hdr, skb->data, hdr_len);qdisc_pkt_len_segs_init() already does a dissection of gso packets.Use pskb_may_pull() instead of skb_header_pointer() to makesure drivers do not have to reimplement this.Some malicious packets could be fed, detect them so that we candrop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: Clamp XDomain response data copy to allocation sizetb_xdp_properties_request() derives the per-packet copy length fromthe response header without checking that it fits in the previouslyallocated data buffer. A malicious peer can set its length fieldlarger than the declared data_length, causing memcpy to write pastthe kcalloc allocation.Clamp the per-packet copy length so that the cumulative offsetnever exceeds data_len.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: Reject zero-length property entries in validatortb_property_entry_valid() accepts entries with length == 0 forDIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passesvalidation but causes an underflow in the null-termination logic: property->value.text[property->length * 4 - 1] = '\0';When property->length is 0 this writes to offset -1 relative tothe allocation.Reject zero-length entries early in the validator since they have novalid representation in the XDomain property protocol.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: kl5kusb105: fix bulk-out buffer overflowklsi_105_prepare_write_buffer() is called by the generic write pathwith the bulk-out buffer and its size (bulk_out_size, 64 bytes). Itstores a two-byte length header at the start of the buffer and copiesthe payload from the write fifo starting at buf + KLSI_HDR_LEN, butpasses the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock);When the fifo holds at least size bytes, size bytes are copied startingtwo bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past itsend. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room forthe header as safe_serial already does.Writing bulk_out_size or more bytes to the tty triggers a slabout-of-bounds write, observed with KASAN by emulating the device withdummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte regionThe out-of-bounds write no longer occurs with this change applied.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tty: hvc_iucv: fix off-by-one in number of supported devicesMAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.This is the number of entries in: static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];Sometimes hvc_iucv_table[] is limited by:(a) if (num > hvc_iucv_devices) // for error detectionor(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places(so these 2 don't agree; second one appears to be correct to me.)hvc_iucv_devices can be 0..8. This is a counter.(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].Oops.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: GNU coreutils uniq is vulnerable to an out-of-bounds read due to incorrect handling of multibyte input when the -w (--check-chars) option is used. The find_field() function miscalculates the byte length of characters by repeatedly processing a fixed pointer instead of advancing through the input, resulting in an inflated length value. This incorrect length is later used in a memcmp operation, causing reads beyond the allocated buffer when processing crafted multibyte input.When running GNU coreutils uniq with attacker-provided arguments, this behavior leads to a crash and potential adjacent heap memory exposure.This issue has been fixed in the commit d64e35a8a4c0e4608321433e0d84d917e4e36371.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- coreutils > 0-0 (version in image is 8.32-150400.9.12.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0670, get_text_props() in src/textprop.c reads a uint16 property count stored inline after a line's text and returns it as the number of 32-byte textprop_T entries that follow. The only check is a floor that guarantees room for a single entry; the count is never checked against the amount of data actually present. A line that declares a large count while carrying little data causes consumers to read far past the end of the line buffer. Such a line can be delivered through a crafted undo file, leading to a crash. This vulnerability is fixed in 9.2.0670.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: Vim is an open source, command line text editor. From 9.2.0320 until 9.2.0679, a crafted undo or swap file can store a virtual-text property whose offset and length point outside the line's property data. When Vim restores or displays such a line it converts the offset into a pointer and reads the virtual text without bounds checking, causing an out-of-bounds read that can crash Vim or disclose adjacent heap memory. This vulnerability is fixed in 9.2.0679.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: property: Reject dir_len < 4 to prevent size_t underflowOn the non-root path, __tb_property_parse_dir() takes dir_len fromentry->length (u16 widened to size_t). Two distinct OOB conditionsfollow when entry->length < 4:1. The non-root path begins with kmemdup(&block[dir_offset], sizeof(*dir->uuid), ...) which always reads 4 dwords from dir_offset. tb_property_entry_valid() only enforces dir_offset + entry->length <= block_len, so a crafted entry with dir_offset close to the end of the property block and entry->length in 0..3 passes that gate but lets the UUID copy run off the block (e.g. dir_offset = 497, dir_len = 3 in a 500-dword block reads block[497..501]).2. After the kmemdup, content_len = dir_len - 4 underflows size_t to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry walk runs OOB on each iteration until an entry fails validation or the kernel oopses on an unmapped page.Reject dir_len < 4 on the non-root path *before* the UUID kmemdup,which closes both holes.Also move INIT_LIST_HEAD(&dir->properties) up to immediately afterthe dir allocation so the new error-return path (and the existinguuid-alloc failure path) calling tb_property_free_dir() sees awalkable list rather than the zero-initialized NULL next/prev thatlist_for_each_entry_safe() would oops on.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: composite: fix integer underflow in WebUSB GET_URL handlingThe WebUSB GET_URL handler in composite_setup() narrowslanding_page_length to fit the host-supplied wLength using landing_page_length = w_length - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH theunsigned subtraction wraps, and the subsequent memcpy(url_descriptor->URL, cdev->landing_page + landing_page_offset, landing_page_length - landing_page_offset);ends up copying close to UINT_MAX bytes from cdev->landing_page intocdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setupon the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps thememcpy as a 4294967293-byte field-spanning write intourl_descriptor->URL (size 252).A USB host can reach this from a single SETUP packet against anygadget that has webusb/use=1 and a landingPage configured.Handle the small-wLength case before the math: when the host requestedfewer bytes than the URL descriptor header, only the header ismeaningful and no URL bytes need to be copied. Settinglanding_page_length to landing_page_offset makes the existing memcpy ano-op and leaves the descriptor returned to the host unchanged for alllarger wLength values.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: wacom: Fix OOB write in wacom_hid_set_device_mode()wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODEusage is always located in the first field (field[0]) of the feature report.However, a device can specify HID_DG_INPUTMODE in a different field.If HID_DG_INPUTMODE is in a field other than the first one and the firstfield has a report_count smaller than the usage_index of HID_DG_INPUTMODE,this leads to an out-of-bounds write to r->field[0]->value.Fix this by storing the field index of HID_DG_INPUTMODE in 'structhid_data' during feature mapping. In wacom_hid_set_device_mode(), usethis stored field index to access the correct field and add boundschecks to ensure both the field index and the value index are withinvalid ranges before writing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: Check for underflow in xfrm_state_mtuLeo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...".Check for underflow and return 1. This causes the sendmsg attempt tofail with ENETUNREACH.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer sizenexio_read_data() pulls data_len and x_len from a packed __be16 headerin the device's interrupt packet and then walks packet->data[0..x_len)and packet->data[x_len..data_len) comparing each byte against athreshold.Both fields are 16-bit on the wire (max 65535). The existingadjustments shave at most 0x100 / 0x80 off, so the loop bound can stillreach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by thepacked header - so packet->data[] has 1017 valid bytes. read_data()callbacks are not given urb->actual_length, and nothing else bounds thewalk.A device that lies about its length can get a ~64 KiB out-of-bounds readpast the coherent DMA allocation. The first index whose byte exceedsNEXIO_THRESHOLD lands in begin_x / begin_y and from there into thereported touch coordinates, so adjacent kernel memory contents leak touserspace as ABS_X / ABS_Y events. Far enough out, the read can alsohit an unmapped page and fault.Fix this all by clamping data_len to the buffer's data[] capacity andx_len to data_len.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:isofs: bound Rock Ridge symlink components to the SL recordget_symlink_chunk() and the SL handling inparse_rock_ridge_inode_internal() walk the variable-length components ofa Rock Ridge "SL" (symbolic link) record. Each component is a two-byteheader (flags, len) followed by len bytes of text, so it occupiesslp->len + 2 bytes. Both loops read slp->len and advance to the nextcomponent, and get_symlink_chunk() additionally doesmemcpy(rpnt, slp->text, slp->len), but neither checks that the componentlies within the SL record before dereferencing it.A crafted SL record whose component declares a len that runs past therecord (rr->len) therefore triggers an out-of-bounds read of up to 255bytes. When the record sits at the tail of its backing buffer - forexample a small kmalloc()ed continuation block reached through a CErecord - the read crosses the allocation; get_symlink_chunk() thencopies the out-of-bounds bytes into the symlink body returned to userspace by readlink(), disclosing adjacent kernel memory.ISO 9660 images are routinely mounted from untrusted removable media -desktop environments auto-mount them (e.g. via udisks2) withoutCAP_SYS_ADMIN - so the record contents are attacker-controlled.Reject any component that does not fit in the remaining record bytesbefore using it. In get_symlink_chunk() return NULL, like the existingoutput-buffer (plimit) checks, so a malformed record makes readlink()fail with -EIO rather than silently returning a truncated target; inparse_rock_ridge_inode_internal() stop the inode-size walk.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 *KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check thatskb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device candeliver a short bulk-IN frame with skb->len in the 6 to 11 range, orleave a short trailing remainder on a later loop iteration. Either caseunderflows usb_packet_length to about 65530.That bypasses the usb_packet_length < ether_packet_length truncation path.The device-supplied ether_packet_length, a le16 up to 65535 read fromheader_start[2], then drives a memcmp() and the following skb_trim() andskb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,which is 14000 bytes. That is an out of bounds read.Require both the start and end framing headers to be present beforesubtracting them, on every loop iteration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ebtables: terminate table name before find_table_lock()update_counters() and compat_update_counters() forward a user-supplied32-byte table name to find_table_lock() without NUL-terminating it. On alookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s","ebtable_", name), and vsnprintf() reads past the name field and thestack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ...compat_do_replace() shares the same unterminated name viacompat_copy_ebt_replace_from_user(); terminate it there too so allfind_table_lock() callers behave alike. The other callers alreadyterminate the name after the copy.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ebtables: module names must be null-terminatedWe need to explicitly check the length, else we may pass non-nullterminated string to request_module().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: p54: validate RX frame length in p54_rx_eeprom_readback()p54_rx_eeprom_readback() copies the requested EEPROM slice out of adevice-supplied readback frame without checking that the skb actually holdsthat many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow inp54_rx_eeprom_readback()") closed the destination overflow by copying afixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),but the source side is still unbounded: nothing verifies the frame is longenough to supply that many bytes.A malicious USB device can send a short frame whose advertised len matchespriv->eeprom_slice_size while the payload is truncated. The equality checkpasses and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)Check that the slice fits in the skb before copying.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATEbpf_prog_attach uses attach_type_to_prog_type to enforce properattach type for BPF_PROG_TYPE_CGROUP_SKB. link_create usesbpf_prog_get and relies on bpf_prog_attach_check_attach_typeto properly verify prog_type <> attach_type association.Add missing attach_type enforcement for the link_create case.Otherwise, it's currently possible to attach cgroup_skb progtypes to other cgroup hooks.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: prevent possible shift-out-of-bounds in sctp_transport_update_rtosyzbot reported a possible shift-out-of-bounds [1]Blamed commit added rto_alpha_max and rto_beta_max set to 1000.It is unclear if some sctp users are setting very large rto_alphaand/or rto_beta.In order to prevent user regression, perform the test at run time.Also add READ_ONCE() annotations as sysctl values can change under us.[1]UBSAN: shift-out-of-bounds in net/sctp/transport.c:509:41shift exponent 64 is too large for 32-bit type 'unsigned int'CPU: 0 UID: 0 PID: 16704 Comm: syz.2.2320 Not tainted syzkaller #0 PREEMPT(full)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:233 [inline] __ubsan_handle_shift_out_of_bounds+0x27f/0x420 lib/ubsan.c:494 sctp_transport_update_rto.cold+0x1c/0x34b net/sctp/transport.c:509 sctp_check_transmitted+0x11c4/0x1c30 net/sctp/outqueue.c:1502 sctp_outq_sack+0x4ef/0x1b20 net/sctp/outqueue.c:1338 sctp_cmd_process_sack net/sctp/sm_sideeffect.c:840 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1372 [inline]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:virtio-net: fix received length check in big packetsSince commit 4959aebba8c0 ("virtio-net: use mtu size as buffer lengthfor big packets"), when guest gso is off, the allocated size for bigpackets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends onnegotiated MTU. The number of allocated frags for big packets is storedin vi->big_packets_num_skbfrags.Because the host announced buffer length can be malicious (e.g. the hostvhost_net driver's get_rx_bufs is modified to announce incorrectlength), we need a check in virtio_net receive path. Currently, thecheck is not adapted to the new change which can lead to NULL pagepointer dereference in the below while loop when receiving length thatis larger than the allocated one.This commit fixes the received length check corresponding to the newchange.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: account for current allocated stack depth in widen_imprecise_scalars()The usage pattern for widen_imprecise_scalars() looks as follows: prev_st = find_prev_entry(env, ...); queued_st = push_stack(...); widen_imprecise_scalars(env, prev_st, queued_st);Where prev_st is an ancestor of the queued_st in the explored statestree. This ancestor is not guaranteed to have same allocated stackdepth as queued_st. E.g. in the following case: def main(): for i in 1..2: foo(i) // same callsite, differnt param def foo(i): if i == 1: use 128 bytes of stack iterator based loopHere, for a second 'foo' call prev_st->allocated_stack is 128,while queued_st->allocated_stack is much smaller.widen_imprecise_scalars() needs to take this into account and avoidaccessing bpf_verifier_state->frame[*]->stack out of bounds.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Fix improper freeing of purex itemIn qla2xxx_process_purls_iocb(), an item is allocated viaqla27xx_copy_multiple_pkt(), which internally callsqla24xx_alloc_purex_item().The qla24xx_alloc_purex_item() function may return a pre-allocated itemfrom a per-adapter pool for small allocations, instead of dynamicallyallocating memory with kzalloc().An error handling path in qla2xxx_process_purls_iocb() incorrectly useskfree() to release the item. If the item was from the pre-allocatedpool, calling kfree() on it is a bug that can lead to memory corruption.Fix this by using the correct deallocation function,qla24xx_free_purex_item(), which properly handles both dynamicallyallocated and pre-allocated items.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: pm8001: Fix use-after-free in pm8001_queue_command()Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactorspm8001_queue_command(), however it introduces a potential cause of a doublefree scenario when it changes the function to return -ENODEV in case of phydown/device gone state.In this path, pm8001_queue_command() updates task status and callstask_done to indicate to upper layer that the task has been handled.However, this also frees the underlying SAS task. A -ENODEV is thenreturned to the caller. When libsas sas_ata_qc_issue() receives this errorvalue, it assumes the task wasn't handled/queued by LLDD and proceeds toclean up and free the task again, resulting in a double free.Since pm8001_queue_command() handles the SAS task in this case, it shouldreturn 0 to the caller indicating that the task has been handled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0316, a command injection vulnerability in Vim's netbeans interface allows a malicious netbeans server to execute arbitrary Ex commands when Vim connects to it, via unsanitized strings in the defineAnnoType and specialKeys protocol messages. This vulnerability is fixed in 9.2.0316.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm mirror: fix integer overflow in create_dirty_log()The argument count calculation in create_dirty_log() performs`*args_used = 2 + param_count` before validating against argc. When auser provides a param_count close to UINT_MAX via the device mappertable string, this unsigned addition wraps around to a small value,causing the subsequent `argc < *args_used` check to be bypassed.The overflowed param_count is then passed as argc to dm_dirty_log_create(),where it can cause out-of-bounds reads on the argv array.Fix by comparing param_count against argc - 2 before performing theaddition, following the same pattern used by parse_features() in thesame file. Since argc >= 2 is already guaranteed, the subtraction issafe.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix OOB in pcpu_init_valueAn out-of-bounds read occurs when copying element from aBPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with thesame value_size that is not rounded up to 8 bytes.The issue happens when:1. A CGROUP_STORAGE map is created with value_size not aligned to 8 bytes (e.g., 4 bytes)2. A pcpu map is created with the same value_size (e.g., 4 bytes)3. Update element in 2 with data in 1pcpu_init_value assumes that all sources are rounded up to 8 bytes,and invokes copy_map_value_long to make a data copy, However, theassumption doesn't stand since there are some cases where the sourcemay not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data.the verifier verifies exactly the size that the source claims, notthe size rounded up to 8 bytes by kernel, an OOB happens when thesource has only 4 bytes while the copy size(4) is rounded up to 8.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Validate GPIO pin LUT table size before iterating[Why&How]The GPIO pin table parsers in get_gpio_i2c_info() andbios_parser_get_gpio_pin_info() derive an element count from the VBIOStable_header.structuresize field, then iterate over gpio_pin[] entries.However, GET_IMAGE() only validates that the table header itself fitswithin the BIOS image. If the VBIOS reports a structuresize larger thanthe actual mapped data, the loop reads past the end of the BIOS image,causing an out-of-bounds read.Fix this by calling bios_get_image() to validate that the full claimedstructuresize is accessible within the BIOS image before entering theloop in both functions.(cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: REXML is an XML toolkit for Ruby. The REXML gem before 3.3.9 has a ReDoS vulnerability when it parses an XML that has many digits between and x...; in a hex numeric character reference (...;). This does not happen with Ruby 3.2 or later. Ruby 3.1 is the only affected maintained Ruby. The REXML gem 3.3.9 or later include the patch to fix the vulnerability.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libruby2_5-2_5 > 0-0 (version in image is 2.5.9-150000.4.54.1).
Description: In the Linux kernel, the following vulnerability has been resolved:inet: frags: flush pending skbs in fqdir_pre_exit()We have been seeing occasional deadlocks on pernet_ops_rwsem sinceSeptember in NIPA. The stuck task was usually modprobe (often loadinga driver like ipvlan), trying to take the lock as a Writer.lockdep does not track readers for rwsems so the read wasn't obviousfrom the reports.On closer inspection the Reader holding the lock was conntrack loopingforever in nf_conntrack_cleanup_net_list(). Based on past experiencewith occasional NIPA crashes I looked thru the tests which run beforethe crash and noticed that the crash follows ip_defrag.sh. An immediatered flag. Scouring thru (de)fragmentation queues reveals skbs sittingaround, holding conntrack references.The problem is that since conntrack depends on nf_defrag_ipv6,nf_defrag_ipv6 will load first. Since nf_defrag_ipv6 loads first itsnetns exit hooks run _after_ conntrack's netns exit hook.Flush all fragment queue SKBs during fqdir_pre_exit() to releaseconntrack references before conntrack cleanup runs. Also flushthe queues in timer expiry handlers when they discover fqdir->deadis set, in case packet sneaks in while we're running the pre_exitflush.The commit under Fixes is not exactly the culprit, but I thinkpreviously the timer firing would eventually unblock the spinningconntrack.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bnxt_en: Fix XDP_TX pathFor XDP_TX action in bnxt_rx_xdp(), clearing of the event flags is notcorrect. __bnxt_poll_work() -> bnxt_rx_pkt() -> bnxt_rx_xdp() may belooping within NAPI and some event flags may be set in earlieriterations. In particular, if BNXT_TX_EVENT is set earlier indicatingsome XDP_TX packets are ready and pending, it will be cleared if it isXDP_TX action again. Normally, we will set BNXT_TX_EVENT again when wesuccessfully call __bnxt_xmit_xdp(). But if the TX ring has no moreroom, the flag will not be set. This will cause the TX producer to beahead but the driver will not hit the TX doorbell.For multi-buf XDP_TX, there is no need to clear the event flags and setBNXT_AGG_EVENT. The BNXT_AGG_EVENT flag should have been set earlier inbnxt_rx_pkt().The visible symptom of this is that the RX ring associated with theTX XDP ring will eventually become empty and all packets will be dropped.Because this condition will cause the driver to not refill the RX ringseeing that the TX ring has forever pending XDP_TX packets.The fix is to only clear BNXT_RX_EVENT when we have successfullycalled __bnxt_xmit_xdp().
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/handshake: duplicate handshake cancellations leak socketWhen a handshake request is cancelled it is removed from thehandshake_net->hn_requests list, but it is still present in thehandshake_rhashtbl until it is destroyed.If a second cancellation request arrives for the same handshake request,then remove_pending() will return false... and assumingHANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continueprocessing through the out_true label, where we put another reference onthe sock and a refcount underflow occurs.This can happen for example if a handshake times out - particularly ifthe SUNRPC client sends the AUTH_TLS probe to the server but doesn'tfollow it up with the ClientHello due to a problem with tlshd. When thetimeout is hit on the server, the server will send a FIN, which triggersa cancellation request via xs_reset_transport(). When the timeout ishit on the client, another cancellation request happens viaxs_tls_handshake_sync().Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancelpath so duplicate cancels can be detected.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/hsr: fix NULL pointer dereference in prp_get_untagged_frame()prp_get_untagged_frame() calls __pskb_copy() to create frame->skb_stdbut doesn't check if the allocation failed. If __pskb_copy() returnsNULL, skb_clone() is called with a NULL pointer, causing a crash:Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTIKASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]CPU: 0 UID: 0 PID: 5625 Comm: syz.1.18 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014RIP: 0010:skb_clone+0xd7/0x3a0 net/core/skbuff.c:2041Code: 03 42 80 3c 20 00 74 08 4c 89 f7 e8 23 29 05 f9 49 83 3e 00 0f 85 a0 01 00 00 e8 94 dd 9d f8 48 8d 6b 7e 49 89 ee 49 c1 ee 03 <43> 0f b6 04 26 84 c0 0f 85 d1 01 00 00 44 0f b6 7d 00 41 83 e7 0cRSP: 0018:ffffc9000d00f200 EFLAGS: 00010207RAX: ffffffff892235a1 RBX: 0000000000000000 RCX: ffff88803372a480RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000000RBP: 000000000000007e R08: ffffffff8f7d0f77 R09: 1ffffffff1efa1eeR10: dffffc0000000000 R11: fffffbfff1efa1ef R12: dffffc0000000000R13: 0000000000000820 R14: 000000000000000f R15: ffff88805144cc00FS: 0000555557f6d500(0000) GS:ffff88808d72f000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000555581d35808 CR3: 000000005040e000 CR4: 0000000000352ef0Call Trace: hsr_forward_do net/hsr/hsr_forward.c:-1 [inline] hsr_forward_skb+0x1013/0x2860 net/hsr/hsr_forward.c:741 hsr_handle_frame+0x6ce/0xa70 net/hsr/hsr_slave.c:84 __netif_receive_skb_core+0x10b9/0x4380 net/core/dev.c:5966 __netif_receive_skb_one_core net/core/dev.c:6077 [inline] __netif_receive_skb+0x72/0x380 net/core/dev.c:6192 netif_receive_skb_internal net/core/dev.c:6278 [inline] netif_receive_skb+0x1cb/0x790 net/core/dev.c:6337 tun_rx_batched+0x1b9/0x730 drivers/net/tun.c:1485 tun_get_user+0x2b65/0x3e90 drivers/net/tun.c:1953 tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f0449f8e1ffCode: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 f9 92 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 4c 93 02 00 48RSP: 002b:00007ffd7ad94c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001RAX: ffffffffffffffda RBX: 00007f044a1e5fa0 RCX: 00007f0449f8e1ffRDX: 000000000000003e RSI: 0000200000000500 RDI: 00000000000000c8RBP: 00007ffd7ad94d20 R08: 0000000000000000 R09: 0000000000000000R10: 000000000000003e R11: 0000000000000293 R12: 0000000000000001R13: 00007f044a1e5fa0 R14: 00007f044a1e5fa0 R15: 0000000000000003 Add a NULL check immediately after __pskb_copy() to handle allocationfailures gracefully.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In GnuPG through 2.4.8, if a signed message has \f at the end of a plaintext line, an adversary can construct a modified message that places additional text after the signed material, such that signature verification of the modified message succeeds (although an "invalid armor" message is printed during verification). This is related to use of \f as a marker to denote truncation of a long plaintext line.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- gpg2 > 0-0 (version in image is 2.4.4-150600.3.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fallback earlier on simult connectionSyzkaller reports a simult-connect race leading to inconsistent fallbackstatus: WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Modules linked in: CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6 RSP: 0018:ffffc900006cf338 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900 R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0 Call Trace: tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197 tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922 tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672 tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918 ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500 dst_input include/net/dst.h:471 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979 __netif_receive_skb+0x1d/0x160 net/core/dev.c:6092 process_backlog+0x442/0x15e0 net/core/dev.c:6444 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494 napi_poll net/core/dev.c:7557 [inline] net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684 handle_softirqs+0x216/0x8e0 kernel/softirq.c:579 run_ksoftirqd kernel/softirq.c:968 [inline] run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960 smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160 kthread+0x3c2/0x780 kernel/kthread.c:463 ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 The TCP subflow can process the simult-connect syn-ack packet aftertransitioning to TCP_FIN1 state, bypassing the MPTCP fallback check,as the sk_state_change() callback is not invoked for * -> FIN_WAIT1transitions.That will move the msk socket to an inconsistent status and the nextincoming data will hit the reported splat.Close the race moving the simult-fallback check at the earliest possiblestage - that is at syn-ack generation time.About the fixes tags: [2] was supposed to also fix this issue introducedby [3]. [1] is required as a dependence: it was not explicitly marked asa fix, but it is one and it has already been backported before [3]. Inother words, this commit should be backported up to [3], including [2]and [1] if that's not already there.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in libxml2, an XML parsing library. This uncontrolled recursion vulnerability occurs in the xmlCatalogXMLResolveURI function when an XML catalog contains a delegate URI entry that references itself. A remote attacker could exploit this configuration-dependent issue by providing a specially crafted XML catalog, leading to infinite recursion and call stack exhaustion. This ultimately results in a segmentation fault, causing a Denial of Service (DoS) by crashing affected applications.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libxml2-2 > 0-0 (version in image is 2.10.3-150500.5.38.1).
Description: An integer underflow vulnerability was found in MIT krb5 in the berval2tl_data() function in plugins/kdb/ldap/libkdb_ldap/ldap_principal2.c. The function performs an unsigned subtraction (bv_len - 2) without a prior bounds check. When bv_len is 0 or 1, the subtraction wraps to a large value which is then truncated to uint16_t, yielding 0xFFFE (65534) or 0xFFFF (65535). The subsequent malloc succeeds and memcpy reads up to 65534 bytes from a 0-1 byte buffer, resulting in a heap out-of-bounds read.The attack vector involves a malicious or compromised LDAP KDB backend returning a krbExtraData attribute with bv_len < 2, triggering the underflow when the KDC or kadmind reads principal data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- krb5 < 1.20.1-150600.11.19.1 (version in image is 1.20.1-150600.11.14.1).
Description: GNU Wget does not validate the IP address provided by an FTP PASV response while operating in FTP passive mode. A malicious FTP server, or an HTTP server that redirects to an FTP URL, can exploit this behavior to redirect Wget's data connection to an arbitrary IP address and port. This allows an attacker to forge server-side requests (SSRF) from the machine running Wget, potentially accessing localhost services or internal network resources.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- wget > 0-0 (version in image is 1.20.3-150600.19.12.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netrom: fix double-free in nr_route_frame()In nr_route_frame(), old_skb is immediately freed without checking ifnr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL,the caller function will free old_skb again, causing a double-free bug.Therefore, to prevent this, we need to modify it to check whethernr_neigh->ax25 is NULL before freeing old_skb.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmitteql_master_xmit() calls netdev_start_xmit(skb, slave) to transmitthrough slave devices, but does not update skb->dev to the slave devicebeforehand.When a gretap tunnel is a TEQL slave, the transmit path reachesiptunnel_xmit() which saves dev = skb->dev (still pointing to teql0master) and later calls iptunnel_xmit_stats(dev, pkt_len). Thisfunction does: get_cpu_ptr(dev->tstats)Since teql_master_setup() does not set dev->pcpu_stat_type toNETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstatsfor teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computesNULL + __per_cpu_offset[cpu], resulting in a page fault. BUG: unable to handle page fault for address: ffff8880e6659018 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 68bc067 P4D 68bc067 PUD 0 Oops: Oops: 0002 [#1] SMP KASAN PTI RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89) Call Trace: ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) __gre_xmit (net/ipv4/ip_gre.c:478) gre_tap_xmit (net/ipv4/ip_gre.c:779) teql_master_xmit (net/sched/sch_teql.c:319) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) neigh_direct_output (net/core/neighbour.c:1660) ip_finish_output2 (net/ipv4/ip_output.c:237) __ip_finish_output.part.0 (net/ipv4/ip_output.c:315) ip_mc_output (net/ipv4/ip_output.c:369) ip_send_skb (net/ipv4/ip_output.c:1508) udp_send_skb (net/ipv4/udp.c:1195) udp_sendmsg (net/ipv4/udp.c:1485) inet_sendmsg (net/ipv4/af_inet.c:859) __sys_sendto (net/socket.c:2206)Fix this by setting skb->dev = slave before callingnetdev_start_xmit(), so that tunnel xmit functions see the correctslave device with properly allocated tstats.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In MIT Kerberos 5 (aka krb5) before 1.22.3, there is a NULL pointer dereference if an application calls gss_accept_sec_context() on a system with a NegoEx mechanism registered in /etc/gss/mech. An unauthenticated remote attacker can trigger this, causing the process to terminate in parse_nego_message.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- krb5 < 1.20.1-150600.11.19.1 (version in image is 1.20.1-150600.11.14.1).
Description: In MIT Kerberos 5 (aka krb5) before 1.22.3, there is an integer underflow and resultant out-of-bounds read if an application calls gss_accept_sec_context() on a system with a NegoEx mechanism registered in /etc/gss/mech. An unauthenticated remote attacker can trigger this, possibly causing the process to terminate in parse_message.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- krb5 < 1.20.1-150600.11.19.1 (version in image is 1.20.1-150600.11.14.1).
Description: lxml is a library for processing XML and HTML in the Python language. Prior to 6.1.0, using either of the two parsers in the default configuration (with resolve_entities=True) allows untrusted XML input to read local files. Setting the resolve_entities option explicitly to resolve_entities='internal' or resolve_entities=False disables the local file access. This vulnerability is fixed in 6.1.0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3-lxml > 0-0 (version in image is 4.9.1-150500.3.4.3).
Description: In the Linux kernel, the following vulnerability has been resolved:tipc: fix divide-by-zero in tipc_sk_filter_connect()A user can set conn_timeout to any value viasetsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When aSYN is rejected with TIPC_ERR_OVERLOAD and the retry path intipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4);If conn_timeout is in the range [0, 3], the integer division yields 0,and the modulo operation triggers a divide-by-zero exception, causing akernel oops/panic.Fix this by clamping conn_timeout to a minimum of 4 at the point of usein tipc_sk_filter_connect().Oops: divide error: 0000 [#1] SMP KASAN NOPTICPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362)Call Trace: tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406) __release_sock (include/net/sock.h:1185 net/core/sock.c:3213) release_sock (net/core/sock.c:3797) tipc_connect (net/tipc/socket.c:2570) __sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabledWhen booting with the 'ipv6.disable=1' parameter, the nd_tbl is neverinitialized because inet6_init() exits before ndisc_init() is calledwhich initializes it. If bonding ARP/NS validation is enabled, an IPv6NS/NA packet received on a slave can reach bond_validate_na(), whichcalls bond_has_this_ip6(). That path calls ipv6_chk_addr() and cancrash in __ipv6_chk_addr_and_flags(). BUG: kernel NULL pointer dereference, address: 00000000000005d8 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170 Call Trace: ipv6_chk_addr+0x1f/0x30 bond_validate_na+0x12e/0x1d0 [bonding] ? __pfx_bond_handle_frame+0x10/0x10 [bonding] bond_rcv_validate+0x1a0/0x450 [bonding] bond_handle_frame+0x5e/0x290 [bonding] ? srso_alias_return_thunk+0x5/0xfbef5 __netif_receive_skb_core.constprop.0+0x3e8/0xe50 ? srso_alias_return_thunk+0x5/0xfbef5 ? update_cfs_rq_load_avg+0x1a/0x240 ? srso_alias_return_thunk+0x5/0xfbef5 ? __enqueue_entity+0x5e/0x240 __netif_receive_skb_one_core+0x39/0xa0 process_backlog+0x9c/0x150 __napi_poll+0x30/0x200 ? srso_alias_return_thunk+0x5/0xfbef5 net_rx_action+0x338/0x3b0 handle_softirqs+0xc9/0x2a0 do_softirq+0x42/0x60 __local_bh_enable_ip+0x62/0x70 __dev_queue_xmit+0x2d3/0x1000 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? packet_parse_headers+0x10a/0x1a0 packet_sendmsg+0x10da/0x1700 ? kick_pool+0x5f/0x140 ? srso_alias_return_thunk+0x5/0xfbef5 ? __queue_work+0x12d/0x4f0 __sys_sendto+0x1f3/0x220 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x101/0xf80 ? exc_page_fault+0x6e/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets tobond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate()and avoid the path to ipv6_chk_addr().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULOnf_osf_match_one() computes ctx->window % f->wss.val in theOSF_WSS_MODULO branch with no guard for f->wss.val == 0. ACAP_NET_ADMIN user can add such a fingerprint via nfnetlink; asubsequent matching TCP SYN divides by zero and panics the kernel.Reject the bogus fingerprint in nfnl_osf_add_callback() above theper-option for-loop. f->wss is per-fingerprint, not per-option, sothe check must run regardless of f->opt_num (including 0). Alsoreject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats thatas "should not happen".Crash: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: nf_osf_match (net/netfilter/nfnetlink_osf.c:220) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:348) nf_hook_slow (net/netfilter/core.c:622) ip_local_deliver (net/ipv4/ip_input.c:265) ip_rcv (include/linux/skbuff.h:1162) __netif_receive_skb_one_core (net/core/dev.c:6181) process_backlog (net/core/dev.c:6642) __napi_poll (net/core/dev.c:7710) net_rx_action (net/core/dev.c:7945) handle_softirqs (kernel/softirq.c:622)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()bareudp_fill_metadata_dst() passes bareudp->sock toudp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.The socket is only created in bareudp_open() and NULLed inbareudp_stop(), so calling this function while the device is downtriggers a NULL dereference via sock->sk. BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160) Call Trace: bareudp_fill_metadata_dst (drivers/net/bareudp.c:532) do_execute_actions (net/openvswitch/actions.c:901) ovs_execute_actions (net/openvswitch/actions.c:1589) ovs_packet_cmd_execute (net/openvswitch/datapath.c:700) genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1209) netlink_rcv_skb (net/netlink/af_netlink.c:2550) Add a NULL check returning -ESHUTDOWN, consistent with the xmit pathsin the same driver.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ks8851: Reinstate disabling of BHs around IRQ handlerIf the driver executes ks8851_irq() AND a TX packet has been sent, thenthe driver enables TX queue via netif_wake_queue() which schedules TXsoftirq to queue packets for this device.If CONFIG_PREEMPT_RT=y is set AND a packet has also been received bythe MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() toallocate SKBs for the received packets. If netdev_alloc_skb_ip_align()is called with BH enabled, then local_bh_enable() at the end ofnetdev_alloc_skb_ip_align() will trigger the pending softirq processing,which may ultimately call the .xmit callback ks8851_start_xmit_par().The ks8851_start_xmit_par() will try to lock struct ks8851_net_par.lock spinlock, which is already locked by ks8851_irq() from whichks8851_start_xmit_par() was called. This leads to a deadlock, whichis reported by the kernel, including a trace listed below.If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0("net: ks8851: Fix deadlock with the SPI chip variant") the deadlockcan also be triggered without received packet in the RX FIFO. Thepending softirqs will be processed on return fromspin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers thedeadlock as well.Fix the problem by disabling BH around critical sections, including theIRQ handler, thus preventing the net_tx_action() softirq from triggeringduring these critical sections. The net_tx_action() softirq is triggeredonce BH are re-enabled and at the end of the IRQ handler, once all theother IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: pm: ADD_ADDR rtx: fix potential data-raceThis mptcp_pm_add_timer() helper is executed as a timer callback insoftirq context. To avoid any data races, the socket lock needs to beheld with bh_lock_sock().If the socket is in use, retry again soon after, similar to what is donewith the keepalive timer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signalingA SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur insend_sigio() and send_sigurg() when a process group receives a signal.When FASYNC is configured for a process group (PIDTYPE_PGID), bothfunctions use read_lock(&tasklist_lock) to traverse the task list.However, they are frequently called from softirq context:- send_sigio() via input_inject_event -> kill_fasync- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)The deadlock is caused by the rwlock writer fairness mechanism:1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or exit() and spins, which blocks all new readers.3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).4. The softirq calls send_sigurg() and attempts to acquire read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.Since PID hashing and do_each_pid_task() traversals are alreadyRCU-protected, the read_lock on tasklist_lock is no longer strictlyrequired for safe traversal. Fix this by replacing tasklist_lock withrcu_read_lock(), aligning the process group signaling path with thesingle-PID path. This also mitigates a potential remote denial ofservice vector via TCP URG packets.Lockdep splat:=====================================================WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected[...]Chain exists of: &dev->event_lock --> &f_owner->lock --> tasklist_lockPossible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(tasklist_lock); local_irq_disable(); lock(&dev->event_lock); lock(&f_owner->lock); lock(&dev->event_lock);*** DEADLOCK ***
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Fix potential null-ptr-deref in decode_choose_args()A message of type CEPH_MSG_OSD_MAP contains an OSD map that itselfcontains a CRUSH map. When decoding this CRUSH map in crush_decode(), anarray of max_buckets CRUSH buckets is decoded, where some indices maynot refer to actual buckets and are therefore set to NULL. The receivedCRUSH map may optionally contain choose_args that get decoded indecode_choose_args(). When decoding a crush_choose_arg_map, a series ofchoose_args for different buckets is decoded, with the bucket_indexbeing read from the incoming message. It is only checked that the bucketindex does not exceed max_buckets, but not that it doesn't point to anindex with a NULL bucket. If a (potentially corrupted) message containsa crush_choose_arg_map including such a bucket_index, a null pointerdereference may occur in the subsequent processing when attempting toaccess the bucket with the given index.This patch fixes the issue by extending the affected check. Now, it isonly attempted to access the bucket if it is not NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Bound MIDI endpoint descriptor scanssnd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpointdescriptor size before using baAssocJackID[], but the descriptor walker canstill return a class-specific endpoint descriptor whose bLength exceeds theremaining bytes in the endpoint-extra scan.That leaves later flexible-array reads bounded by bLength, but not by theremaining bytes in the endpoint-extra scan.Stop walking when bLength is zero orextends past the remaining endpoint-extra scan.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2/dlm: validate qr_numregions in dlm_match_regions()Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGIONnetwork message is used to drive loops over the qr_regions buffer withoutsufficient validation. This series fixes two issues:- Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-of-bounds reads past the 1024-byte qr_regions buffer.- Patch 2 fixes an off-by-one in the local-vs-remote comparison loop, which uses '<=' instead of '<', reading one entry past the valid range even when qr_numregions is within bounds.This patch (of 2):The qr_numregions field from a DLM_QUERY_REGION network message is useddirectly as loop bounds in dlm_match_regions() without checking againstO2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS(32) entries, a crafted message with qr_numregions > 32 causesout-of-bounds reads past the qr_regions buffer.Add a bounds check for qr_numregions before entering the loops.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: disable BH before calling udp_tunnel_xmit_skb()udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run withBH disabled. After commit 6f1a9140ecda ("add xmit recursion limit totunnel xmit functions"), on the path: udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.Without local_bh_disable(), the context may move between CPUs, which canbreak the inc/dec pairing. This may lead to incorrect recursion leveldetection and cause packets to be dropped in ip(6)_tunnel_xmit() or__dev_queue_xmit().Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.In my testing, after enabling the SCTP over UDP: # ip net exec ha sysctl -w net.sctp.udp_port=9899 # ip net exec ha sysctl -w net.sctp.encap_port=9899 # ip net exec hb sysctl -w net.sctp.udp_port=9899 # ip net exec hb sysctl -w net.sctp.encap_port=9899 # ip net exec ha iperf3 -s- without this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender [ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver- with this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bcmgenet: fix racing timeout handlerThe bcmgenet_timeout handler tries to take down all tx queues whena single queue times out. This is over zealous and causes many raceconditions with queues that are still chugging along. Instead letsonly restart the timed out queue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Linux-PAM through 1.7.2 contains an observable timing discrepancy (CWE-208) in the pam_userdb module's plaintext-password comparison path in modules/pam_userdb/pam_userdb.c that allows a local or network-adjacent attacker able to repeatedly drive authentication through a calling service to recover the plaintext password of a target account by measuring response-timing differences. The comparison uses strncmp() (or strncasecmp() when PAM_ICASE_ARG is set) preceded by a length-equality check, so the time to reject a candidate depends on the index of the first differing byte and on whether the candidate's length matches the stored password, leaking the password length and individual prefix bytes. The vulnerable path is reached when the administrator configures pam_userdb with crypt=none, with an unrecognized crypt method, or without a crypt= argument, causing the module to store and compare credentials in plaintext.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- pam > 0-0 (version in image is 1.3.0-150000.6.86.1).
Description: A norm.Iter can enter an infinite loop when handling input containing invalid UTF-8 bytes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri contains a bug when calling certain methods on allocated-but-uninitialized native wrapper classes that inherit from Nokogiri::XML::Node. This caused a NULL pointer dereference that could crash the process. This vulnerability is fixed in 1.19.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- ruby2.5-rubygem-nokogiri > 0-0 (version in image is 1.8.5-150400.14.6.1).
Description: Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::XPathContext did not keep its source document alive for garbage collection. If an XPathContext outlived its document and the document was collected, evaluating an XPath expression could read invalid memory and potentially segfault. This is only reachable when application code constructs an XPathContext directly and lets the document become unreachable while continuing to use the context. The normal Document#xpath, #css, and related search methods are not affected, and it is not triggerable by malicious document input. This vulnerability is fixed in 1.19.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- ruby2.5-rubygem-nokogiri > 0-0 (version in image is 1.8.5-150400.14.6.1).
Description: GNU Wget through 1.25.0, fixed in commit c2640fe, contains a heap buffer overflow vulnerability in the convert_fname() function within src/url.c that allows remote attackers to trigger memory corruption through a server-supplied filename requiring character set conversion. When the output buffer is too small during iconv E2BIG reallocation, the reallocation logic miscalculates the remaining space, leading to a heap buffer overflow that can be exploited via a maliciously crafted server response.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- wget > 0-0 (version in image is 1.20.3-150600.19.12.1).
Description: GNU Wget through 1.25.0, fixed in commit dd692d9, contains a heap buffer overflow vulnerability in the html_quote_string() function in src/convert.c that allows a remote attacker to trigger memory corruption by supplying a crafted HTML attribute with a large number of characters requiring entity encoding. A server-supplied HTML attribute causes a signed integer counter to overflow during output size accumulation, resulting in an undersized heap allocation and subsequent heap buffer overflow during the copy phase.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- wget > 0-0 (version in image is 1.20.3-150600.19.12.1).
Description: In sshd in OpenSSH before 10.4, DisableForwarding=yes was supposed to take precedence over PermitTunnel=yes, but did not.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: property: Reject u32 wrap in tb_property_entry_valid()entry->value is u32 and entry->length is u16; the sum is performed inu32 and wraps. A malicious XDomain peer can pickvalue = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0and passes the > block_len check. tb_property_parse() then passesentry->value to parse_dwdata() as a dword offset into the propertyblock, reading attacker-directed memory far past the allocation.For TEXT-typed entries with the "deviceid" or "vendorid" keys thislands in xd->device_name / xd->vendor_name and is readable back viathe per-XDomain device_name / vendor_name sysfs attributes; the leakis NUL-bounded (kstrdup() stops at the first zero byte) anduntargeted (the attacker picks a delta, not an absolute address).DATA-typed entries are parsed into property->value.data but notgenerically surfaced to userspace.Use check_add_overflow() so a wrapped sum is rejected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction checkAn unintended behavior in the TCP conntrack state machine allows aconnection to be forced into the CLOSE state using an RST packet with aninvalid sequence number.Specifically, after a SYN packet is observed, an RST with an invalid SEQcan transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless ofwhether the RST corresponds to the expected reply direction. The relevantcode path assumes the RST is a response to an outgoing SYN, but does notvalidate packet direction or ensure that a matching SYN was actually sentin the opposite direction.As a result, a crafted packet sequence consisting of a SYN followed by aninvalid-sequence RST can prematurely terminate an active NAT entry. Thismakes connection teardown easier than intended.So, tighten the state transition logic to ensure that RST-triggeredCLOSE transitions only occur when the RST is a valid response to apreviously observed SYN in the correct direction.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/handshake: Use spin_lock_bh for hn_locknvmet_tcp_state_change(), a socket callback that runs in BH context,can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()and tls_handshake_cancel(). handshake_req_cancel() acquireshn->hn_lock with plain spin_lock(). If a process-context thread onthe same CPU holds hn->hn_lock when a softirq invokes the cancel path,the lock attempt deadlocks. This is the only caller that invokestls_handshake_cancel() from BH context; every other consumer calls itfrom process context.Deferring the cancel to process context in the NVMe target is notstraightforward: nvmet_tcp_schedule_release_queue() must calltls_handshake_cancel() atomically with its state transition toDISCONNECTING. If the cancel were deferred, the handshake completioncallback could fire in the window before the cancel runs, observe theunexpected state, and return without dropping its kref on the queue.Reworking that interlock is considerably more invasive than hardeningthe handshake lock. Convert all hn->hn_lock acquisitions fromspin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock isnever taken with softirqs enabled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: cortina: Make RX SKB per-portThe SKB used to assemble packets from fragments in gmac_rx()is static local, but the Gemini has two ethernet ports, meaningthere can be races between the ports on a bad day if a deviceis using both.Make the RX SKB a per-port variable and carry it over betweeninvocations in the port struct instead.Zero the pointer once we call napi_gro_frags(), on error (aftercalling napi_free_frags()) or if the port is stopped.Zero it in some place where not strictly necessary just toemphasize what is going on.This was found by Sashiko during normal patch review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: ioam: add NULL check for idev in ipv6_hop_ioam()Reported by Sashiko:The function ipv6_hop_ioam() accesses__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returnedidev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptrvia RCU, __in6_dev_get() can return NULL during interface teardown, whichcould cause a NULL pointer dereference when processing an IOAM Hop-by-Hopoption.Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sgWhen the server answers an RTRS READ, rdma_write_sg() builds the sourcescatter/gather entry for the IB_WR_RDMA_WRITE that returns data to thepeer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len);rd_msg points into the chunk buffer that the remote peer filled viaRDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->process_read()), so desc[0].len is attacker-controlled and, before thischange, was only rejected when zero. The source address is the fixedchunk start (dma_addr[msg_id]) and the source lkey is the PD-widelocal_dma_lkey, which is not tied to the chunk's MR mapping, so the verbslayer does not constrain the transfer length to max_chunk_size. msg_idand off are bounded against queue_depth and max_chunk_size inrtrs_srv_rdma_done(), but desc[0].len is a separate field that was notchecked against the chunk size.A peer that advertises desc[0].len larger than max_chunk_size can makethe posted RDMA write read past the chunk's mapped region. The resultingbehaviour depends on the IOMMU configuration: with no IOMMU or inpassthrough mode the read may extend into memory adjacent to the chunkand be returned to the peer, which can disclose host memory; with atranslating IOMMU the out-of-range access is expected to fault and abortthe connection. In either case the transfer exceeds what the protocolpermits and is driven by a remote peer.Reject a descriptor length above max_chunk_size, mirroring the existingoff >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clientsdo not exceed it: the client sets desc[0].len to its MR length, which iscapped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Successfully using libcurl to do a transfer over a specific HTTP proxy(`proxyA`) with **Digest** authentication and then changing the proxy host toa second one (`proxyB`) for a second transfer, reusing the same handle, makeslibcurl wrongly pass on the `Proxy-Authorization:` header field meant for`proxyA`, to `proxyB`.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: When asking curl to use a `.netrc` file to find credentials and at the sametime specifying a URL with a username(without a password), like`https://user@example.com/`, curl could wrongly get and use the password for*another* user set in the `.netrc` file for that host if such a one exists andthere is no match for the specified user.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: Calling `curl_easy_pause()` within the event-based `CURLMOPT_SOCKETFUNCTION`callback triggers a use-after-free vulnerability, where libcurl attempts tostore a flag using a dangling struct pointer immediately after that pointer'smemory has been freed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: In this scenario, libcurl first uses a proper HTTP/3 server for the initialtransfers, and when it makes a second transfer to the same site it has beenreplaced by the attacker's impostor machine - without a valid certificate.When libcurl returns to the hostname the second time with a cached SSL session(`CURLOPT_SSL_SESSIONID_CACHE` is not disabled) and early data enabled (the`CURLSSLOPT_EARLYDATA` bit is set in `CURLOPT_SSL_OPTIONS`), libcurl mightsend off the second request's bytes on that new connection *before* enforcingthe certificate verification failure. Potentially leaking sensitiveinformation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme: fix admin request_queue lifetimeThe namespaces can access the controller's admin request_queue, andstale references on the namespaces may exist after tearing down thecontroller. Ensure the admin request_queue is active by moving thecontroller's 'put' to after all controller references have been releasedto ensure no one is can access the request_queue. This fixes a reporteduse-after-free bug: BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0 Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287 CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15 Tainted: [E]=UNSIGNED_MODULE Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025 Call Trace: dump_stack_lvl+0x4f/0x60 print_report+0xc4/0x620 ? _raw_spin_lock_irqsave+0x70/0xb0 ? _raw_read_unlock_irqrestore+0x30/0x30 ? blk_queue_enter+0x41c/0x4a0 kasan_report+0xab/0xe0 ? blk_queue_enter+0x41c/0x4a0 blk_queue_enter+0x41c/0x4a0 ? __irq_work_queue_local+0x75/0x1d0 ? blk_queue_start_drain+0x70/0x70 ? irq_work_queue+0x18/0x20 ? vprintk_emit.part.0+0x1cc/0x350 ? wake_up_klogd_work_func+0x60/0x60 blk_mq_alloc_request+0x2b7/0x6b0 ? __blk_mq_alloc_requests+0x1060/0x1060 ? __switch_to+0x5b7/0x1060 nvme_submit_user_cmd+0xa9/0x330 nvme_user_cmd.isra.0+0x240/0x3f0 ? force_sigsegv+0xe0/0xe0 ? nvme_user_cmd64+0x400/0x400 ? vfs_fileattr_set+0x9b0/0x9b0 ? cgroup_update_frozen_flag+0x24/0x1c0 ? cgroup_leave_frozen+0x204/0x330 ? nvme_ioctl+0x7c/0x2c0 blkdev_ioctl+0x1a8/0x4d0 ? blkdev_common_ioctl+0x1930/0x1930 ? fdget+0x54/0x380 __x64_sys_ioctl+0x129/0x190 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f765f703b0b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000 R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003 R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdumpDo not block PCI config accesses through pci_cfg_access_lock() whenexecuting the s390 variant of PCI error recovery: Acquire justdevice_lock() instead of pci_dev_lock() as powerpc's EEH andgenerig PCI AER processing do.During error recovery testing a pair of tasks was reported to be hung:mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not workingINFO: task kmcheck:72 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<000000065256f572>] schedule_preempt_disabled+0x22/0x30 [<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8 [<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core] [<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core] [<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398 [<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<0000000652172e28>] pci_wait_cfg+0x80/0xe8 [<0000000652172f94>] pci_cfg_access_lock+0x74/0x88 [<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core] [<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core] [<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core] [<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168 [<0000000652513212>] devlink_health_report+0x19a/0x230 [<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]No kernel log of the exact same error with an upstream kernel isavailable - but the very same deadlock situation can be constructed there,too:- task: kmcheck mlx5_unload_one() tries to acquire devlink lock while the PCI error recovery code has set pdev->block_cfg_access by way of pci_cfg_access_lock()- task: kworker mlx5_crdump_collect() tries to set block_cfg_access through pci_cfg_access_lock() while devlink_health_report() had acquired the devlink lock.A similar deadlock situation can be reproduced by requesting acrdump with > devlink health dump show pci/ reporter fw_fatalwhile PCI error recovery is executed on the same physical functionby mlx5_core's pci_error_handlers. On s390 this can be injected with > zpcictl --reset-fw Tests with this patch failed to reproduce that second deadlock situation,the devlink command is rejected with "kernel answers: Permission denied" -and we get a kernel log message of:mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5because the config read of VSC_SEMAPHORE is rejected by the underlyinghardware.Two prior attempts to address this issue have been discussed andultimately rejected [see link], with the primary argument that s390'simplementation of PCI error recovery is imposing restrictions thatneither powerpc's EEH nor PCI AER handling need. Tests show that PCIerror recovery on s390 is running to completion even without blockingaccess to PCI config space.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ethtool: Avoid overflowing userspace buffer on stats queryThe ethtool -S command operates across three ioctl calls:ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, andETHTOOL_GSTATS for the values.If the number of stats changes between these calls (e.g., due to devicereconfiguration), userspace's buffer allocation will be incorrect,potentially leading to buffer overflow.Drivers are generally expected to maintain stable stat counts, but somedrivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, makingthis scenario possible.Some drivers try to handle this internally:- bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver's stats count.- micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer.However, both use stats.n_stats which is already assigned with the valuereturned from get_sset_count(), hence won't solve the issue describedhere.Change ethtool_get_strings(), ethtool_get_stats(),ethtool_get_phy_stats() to not return anything in case of a mismatchbetween userspace's size and get_sset_size(), to prevent bufferoverflow.The returned n_stats value will be equal to zero, to reflect thatnothing has been returned.This could result in one of two cases when using upstream ethtool,depending on when the size change is detected:1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available2. When detected in get stats, all stats will be reported as zero.Both cases are presumably transient, and a subsequent ethtool callshould succeed.Other than the overflow avoidance, these two cases are very evident (nooutput/cleared stats), which is arguably better than presentingincorrect/shifted stats.I also considered returning an error instead of a "silent" response, butthat seems more destructive towards userspace apps.Notes:- This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior.- RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released.- Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it's not zero, to prevent any regressions.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:efivarfs: fix error propagation in efivar_entry_get()efivar_entry_get() always returns success even if the underlying__efivar_entry_get() fails, masking errors.This may result in uninitialized heap memory being copied to userspacein the efivarfs_file_read() path.Fix it by returning the error from __efivar_entry_get().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()In iscsit_dec_session_usage_count(), the function calls complete() whileholding the sess->session_usage_lock. Similar to the connection usage countlogic, the waiter signaled by complete() (e.g., in the session releasepath) may wake up and free the iscsit_session structure immediately.This creates a race condition where the current thread may attempt toexecute spin_unlock_bh() on a session structure that has already beendeallocated, resulting in a KASAN slab-use-after-free.To resolve this, release the session_usage_lock before calling complete()to ensure all dereferences of the sess pointer are finished before thewaiter is allowed to proceed with deallocation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()Add a DMA-safe buffer and use it for spi_read() instead of a stackmemory. All SPI buffers must be DMA-safe.Since we only need up to 3 bytes, we just use a u8[] instead of __be16and __be32 and change the conversion functions appropriately.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_sync: annotate data-races around hdev->req_status__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND;However, several other functions read or write hdev->req_status withoutholding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort pathSince __hci_cmd_sync_sk() runs on hdev->req_workqueue whilehci_send_cmd_sync() runs on hdev->workqueue, these are differentworkqueues that can execute concurrently on different CPUs. The plainC accesses constitute a data race.Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accessesto hdev->req_status to prevent potential compiler optimizations thatcould affect correctness (e.g., load fusing in the wait_eventcondition or store reordering).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lutNumber of MW LUTs depends on NTB configuration and can be set to zero,in such scenario rounddown_pow_of_two will cause undefined behaviour andshould not be performed.This patch ensures that rounddown_pow_of_two is called on valid value.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:minix: Add required sanity checking to minix_check_superblock()The fs/minix implementation of the minix filesystem does not currentlysupport any other value for s_log_zone_size than 0. This is also theonly value supported in util-linux; see mkfs.minix.c line 511. Inaddition, this patch adds some sanity checking for the other minixsuperblock fields, and moves the minix_blocks_needed() checks for thezmap and imap also to minix_check_super_block().This also closes a related syzbot bug report.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: solo6x10: Check for out of bounds chip_idClang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type(literal "1" is an "int") could end up being shifted beyond 32 bits,so instrumentation was added (and due to the double is_tw286x() callseen via inlining), Clang decides the second one must now be undefinedbehavior and elides the rest of the function[1]. This is a known problemwith Clang (that is still being worked on), but we can avoid the entireproblem by actually checking the existing max chip ID, and now there isno runtime instrumentation added at all since everything is known to bewithin bounds.Additionally use an unsigned value for the shift to remove theinstrumentation even without the explicit bounds checking.[hverkuil: fix checkpatch warning for is_tw286x]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix transaction abort when snapshotting received subvolumesCurrently a user can trigger a transaction abort by snapshotting apreviously received snapshot a bunch of times until we reach aBTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size wecan store in a leaf). This is very likely not common in practice, butif it happens, it turns the filesystem into RO mode. The snapshot, sendand set_received_subvol and subvol_setflags (used by receive) don'trequire CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious usercould use this to turn a filesystem into RO mode and disrupt a system.Reproducer script: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # Create a subvolume and set it to RO so that it can be used for send. btrfs subvolume create $MNT/sv touch $MNT/sv/foo btrfs property set $MNT/sv ro true # Send and receive the subvolume into snaps/sv. mkdir $MNT/snaps btrfs send $MNT/sv | btrfs receive $MNT/snaps # Now snapshot the received subvolume, which has a received_uuid, a # lot of times to trigger the leaf overflow. total=500 for ((i = 1; i <= $total; i++)); do echo -ne "\rCreating snapshot $i/$total" btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null done echo umount $MNTWhen running the test: $ ./test.sh (...) Create subvolume '/mnt/sdi/sv' At subvol /mnt/sdi/sv At subvol sv Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file systemAnd in dmesg/syslog: $ dmesg (...) [251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252! [251067.629212] ------------[ cut here ]------------ [251067.630033] BTRFS: Transaction aborted (error -75) [251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235 [251067.632851] Modules linked in: btrfs dm_zero (...) [251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [251067.646165] Tainted: [W]=WARN [251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs] [251067.649984] Code: f0 48 0f (...) [251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292 [251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3 [251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750 [251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820 [251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0 [251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5 [251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000 [251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0 [251067.661972] Call Trace: [251067.662292] [251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs] [251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs] [251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs] [251067.665238] ? _raw_spin_unlock+0x15/0x30 [251067.665837] ? record_root_---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: pip prior to version 26.1 would run self-update check functionality after installing wheel files which required importing well-known Python modules names. These module imports were intentionally deferred to increase startup time of the pip CLI. The patch changes self-update functionality to run before wheels are installed to prevent newly-installed modules from being imported shortly after the installation of a wheel package. Users should still review package contents prior to installation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SEV: Ignore Port I/O requests of length '0'Explicitly ignore Port I/O requests of length '0' (or count '0'), so thatsetting up the software scratch area (and other code) doesn't have toworry about underflowing the length, and to allow for WARNing on tryingto configure the scratch area with len==0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: Do not re-initialize smc hashtablesINIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),proto_register() and sock_register(). This can lead to smc_v*_hashinfo.htbeing reset even though hash entries already exist and are being used,possibly resulting in a corrupted list.Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht insmc_init(); it is implicitly initialised to zero anyhow. AddHLIST_HEAD_INIT to the definitions for clarity.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfs: Fix potential for tearing in ->remote_i_size and ->zero_pointFix potential tearing in using ->remote_i_size and ->zero_point by copyingi_size_read() and i_size_write() and using the same seqcount as for i_size.We need to make sure that netfslib and the filesystems that use it alwayshold i_lock whilst updating any of the sizes to prevent i_size_seqcountfrom getting corrupted.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: fsl-lpspi: terminate the RX channel on TX prepare failure pathWhen dmaengine_prep_slave_sg() fails for the TX channel, the error pathterminates the TX DMA channel but leaves the RX channel running. Sincethe RX channel was already submitted and issued prior to preparingthe TX descriptor, returning -EINVAL causes the SPI core to unmap theDMA buffers while the RX DMA engine continues writing to them, leadingto potential memory corruption or use-after-free.Terminate the RX channel before returning on the TX prepare failure path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: add some missing log lockingFunction gfs2_logd() calls the log flushing functions gfs2_ail1_start(),gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock,but these functions require exclusion against concurrent transactions.To fix that, add a non-locking __gfs2_log_flush() function. Then, ingfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned logflushing functions and __gfs2_log_flush().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:landlock: Fix handling of disconnected directoriesDisconnected files or directories can appear when they are visible andopened from a bind mount, but have been renamed or moved from the sourceof the bind mount in a way that makes them inaccessible from the mountpoint (i.e. out of scope).Previously, access rights tied to files or directories opened through adisconnected directory were collected by walking the related hierarchydown to the root of the filesystem, without taking into account themount point because it couldn't be found. This could lead toinconsistent access results, potential access right widening, andhard-to-debug renames, especially since such paths cannot be printed.For a sandboxed task to create a disconnected directory, it needs tohave write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) tothe underlying source of the bind mount, and read access to the relatedmount point. Because a sandboxed task cannot acquire more accessrights than those defined by its Landlock domain, this could lead toinconsistent access rights due to missing permissions that should beinherited from the mount point hierarchy, while inheriting permissionsfrom the filesystem hierarchy hidden by this mount point instead.Landlock now handles files and directories opened from disconnecteddirectories by taking into account the filesystem hierarchy when themount point is not found in the hierarchy walk, and also always takinginto account the mount point from which these disconnected directorieswere opened. This ensures that a rename is not allowed if it wouldwiden access rights [1].The rationale is that, even if disconnected hierarchies might not bevisible or accessible to a sandboxed task, relying on the collectedaccess rights from them improves the guarantee that access rights willnot be widened during a rename because of the access right comparisonbetween the source and the destination (see LANDLOCK_ACCESS_FS_REFER).It may look like this would grant more access on disconnected files anddirectories, but the security policies are always enforced for all theevaluated hierarchies. This new behavior should be less surprising tousers and safer from an access control perspective.Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() andfix the related comment.Because opened files have their access rights stored in the related filesecurity properties, there is no impact for disconnected or unlinkedfiles.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: openvswitch: fix middle attribute validation in push_nsh() actionThe push_nsh() action structure looks like this: OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...))The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK'ed by thenla_for_each_nested() inside __ovs_nla_copy_actions(). The innermostOVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK'ed by the nla_for_each_nested()inside nsh_key_put_from_nlattr(). But nothing checks if the attributein the middle is OK. We don't even check that this attribute is theOVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data()calls - first time directly while calling validate_push_nsh() and thesecond time as part of the nla_for_each_nested() macro, which isn'tsafe, potentially causing invalid memory access if the size of thisattribute is incorrect. The failure may not be noticed duringvalidation due to larger netlink buffer, but cause trouble later duringaction execution where the buffer is allocated exactly to the size: BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] Read of size 184 at addr ffff88816459a634 by task a.out/22624 CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary) Call Trace: dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x2c/0x390 kasan_report+0xdd/0x110 kasan_check_range+0x35/0x1b0 __asan_memcpy+0x20/0x60 nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] push_nsh+0x82/0x120 [openvswitch] do_execute_actions+0x1405/0x2840 [openvswitch] ovs_execute_actions+0xd5/0x3b0 [openvswitch] ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch] genl_family_rcv_msg_doit+0x1d6/0x2b0 genl_family_rcv_msg+0x336/0x580 genl_rcv_msg+0x9f/0x130 netlink_rcv_skb+0x11f/0x370 genl_rcv+0x24/0x40 netlink_unicast+0x73e/0xaa0 netlink_sendmsg+0x744/0xbf0 __sys_sendto+0x3d6/0x450 do_syscall_64+0x79/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Let's add some checks that the attribute is properly sized and it'sthe only one attribute inside the action. Technically, there is noreal reason for OVS_KEY_ATTR_NSH to be there, as we know that we'repushing an NSH header already, it just creates extra nesting, butthat's how uAPI works today. So, keeping as it is.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/huge_memory: fix folio isn't locked in softleaf_to_folio()On arm64 server, we found folio that get from migration entry isn't lockedin softleaf_to_folio(). This issue triggers when mTHP splitting andzap_nonpresent_ptes() races, and the root cause is lack of memory barrierin softleaf_to_folio(). The race is as follows: CPU0 CPU1deferred_split_scan() zap_nonpresent_ptes() lock folio split_folio() unmap_folio() change ptes to migration entries __split_folio_to_order() softleaf_to_folio() set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry)) smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio)) prep_compound_page() for tail pagesIn __split_folio_to_order(), smp_wmb() guarantees page flags of tail pagesare visible before the tail page becomes non-compound. smp_wmb() shouldbe paired with smp_rmb() in softleaf_to_folio(), which is missed. As aresult, if zap_nonpresent_ptes() accesses migration entry that stores tailpfn, softleaf_to_folio() may see the updated compound_head of tail pagebefore page->flags.This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()because of the race between folio split and zap_nonpresent_ptes()leading to a folio incorrectly undergoing modification without a foliolock being held.This is a BUG_ON() before commit 93976a20345b ("mm: eliminate furtherswapops predicates"), which in merged in v6.19-rc1.To fix it, add missing smp_rmb() if the softleaf entry is migration entryin softleaf_to_folio() and softleaf_to_page().[tujinjiang@huawei.com: update function name and comments]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bridge: use a stable FDB dst snapshot in RCU readersLocal FDB entries can be rewritten in place by `fdb_delete_local()`, whichupdates `f->dst` to another port or to `NULL` while keeping the entryalive. Several bridge RCU readers inspect `f->dst`, including`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.These readers currently load `f->dst` multiple times and can thereforeobserve inconsistent values across the check and later dereference.In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change`f->dst` after the NULL check and before the `port_no` dereference,leading to a NULL-ptr-deref.Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in eachaffected RCU reader and using that snapshot for the rest of the accesssequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`with `WRITE_ONCE()` so the readers and writer use matching access patterns.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZEThe current implementation incorrectly handles memory regions (MRs) withpage sizes different from the system PAGE_SIZE. The core issue is thatrxe_set_page() is called with mr->page_size step increments, but thepage_list stores individual struct page pointers, each representingPAGE_SIZE of memory.ib_sg_to_page() has ensured that when i>=1 eithera) SG[i-1].dma_end and SG[i].dma_addr are contiguousorb) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned.This leads to incorrect iova-to-va conversion in scenarios:1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K): ibmr->iova = 0x181800 sg[0]: dma_addr=0x181800, len=0x800 sg[1]: dma_addr=0x173000, len=0x1000 Access iova = 0x181800 + 0x810 = 0x182010 Expected VA: 0x173010 (second SG, offset 0x10) Before fix: - index = (0x182010 >> 12) - (0x181800 >> 12) = 1 - page_offset = 0x182010 & 0xFFF = 0x10 - xarray[1] stores system page base 0x170000 - Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong)2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K): ibmr->iova = 0x18f800 sg[0]: dma_addr=0x18f800, len=0x800 sg[1]: dma_addr=0x170000, len=0x1000 Access iova = 0x18f800 + 0x810 = 0x190010 Expected VA: 0x170010 (second SG, offset 0x10) Before fix: - index = (0x190010 >> 16) - (0x18f800 >> 16) = 1 - page_offset = 0x190010 & 0xFFFF = 0x10 - xarray[1] stores system page for dma_addr 0x170000 - Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong)Yi Zhang reported a kernel panic[1] years ago related to this defect.Solution:1. Replace xarray with pre-allocated rxe_mr_page array for sequential indexing (all MR page indices are contiguous)2. Each rxe_mr_page stores both struct page* and offset within the system page3. Handle MR page_size != PAGE_SIZE relationships: - page_size > PAGE_SIZE: Split MR pages into multiple system pages - page_size <= PAGE_SIZE: Store offset within system page4. Add boundary checks and compatibility validationThis ensures correct iova-to-va conversion regardless of MR page sizeand system PAGE_SIZE relationship, while improving performance througharray-based sequential access.Tests on 4K and 64K PAGE_SIZE hosts:- rdma-core/pytests $ ./build/bin/run_tests.py --dev eth0_rxe- blktest: $ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd[1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:exfat: fix potential use-after-free in exfat_find_dir_entry()In exfat_find_dir_entry(), the buffer_head obtained fromexfat_get_dentry() is released with brelse(bh) before the fall-throughTYPE_EXTEND branch reads the directory entry through ep (which pointsinto bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... }After brelse() drops our reference, nothing guarantees that theunderlying page backing bh->b_data remains valid for the subsequentexfat_extract_uni_name() read. This is the same pattern fixed incommit fc961522ddbd ("exfat: Fix potential use after free inexfat_load_upcase_table()").Move brelse(bh) so it runs after ep is no longer dereferenced oneach branch.Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y+ CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image(long filename with same-hash collisions forcing the TYPE_EXTEND path).With a debug-only invalidate_bdev() inserted between brelse(bh) andthe ep read to make the stale-deref window deterministic, theunpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0With this patch applied, the same instrumented harness completescleanly under the same sanitizer stack. I have not reproduced acrash on an uninstrumented kernel under ordinary reclaim; theinstrumented A/B establishes the lifetime violation and that thepatch closes it, not an unaided triggerability claim.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: composite: fix dead empty check in the USB_DT_OTG handlerThe OTG branch of composite_setup() falls back to the firstconfiguration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value);list_first_entry() never returns NULL. On an empty list it returnscontainer_of() of the list head. So the "if (!config)" check is dead.When cdev->configs is empty, config points at the head inside structusb_composite_dev. config->descriptors[0] reads whatever sits at thatoffset. The memcpy copies up to w_length bytes of it into the responsebuffer.cdev->configs can be empty in two cases. One is a teardown race ongadget unbind with a control transfer in flight. The other is a driverthat sets is_otg before it adds a config. A reproducer that holdscdev->configs empty triggers a KASAN fault in this branch.Use list_first_entry_or_null() so the existing check does its job.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: Fix potential uninit-value access in __ip6_make_skb()As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flagsinstead of testing HDRINCL on the socket to avoid a race condition whichcauses uninit-value access.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iavf: fix off-by-one issues in iavf_config_rss_reg()There are off-by-one bugs when configuring RSS hash key and lookuptable, causing out-of-bounds reads to memory [1] and out-of-boundswrites to device registers.Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"),the loop upper bounds were: i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEXwhich is safe since the value is the last valid index.That commit changed the bounds to: i <= adapter->rss_{key,lut}_size / 4where `rss_{key,lut}_size / 4` is the number of dwords, so the lastvalid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=`accesses one element past the end.Fix the issues by using `<` instead of `<=`, ensuring we do not exceedthe bounds.[1] KASAN splat about rss_key_size off-by-one BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800 Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63 CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: iavf iavf_watchdog_task Call Trace: dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x1a0 iavf_config_rss+0x619/0x800 iavf_watchdog_task+0x2be7/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 Allocated by task 63: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x246/0x6f0 iavf_watchdog_task+0x28fc/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff888102c50100 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes to the right of allocated 52-byte region [ffff888102c50100, ffff888102c50134) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x102c50 flags: 0x200000000000000(node=0|zone=2) page_type: f5(slab) raw: 0200000000000000 ffff8881000418c0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc >ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ^ ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()syzbot and Eulgyu Kim reported crashes in mptcp_pm_nl_get_local_id()and/or mptcp_pm_nl_is_backup()Root cause is list_splice_init() in mptcp_pm_nl_flush_addrs_doit()which is not RCU ready.list_splice_init_rcu() can not be called here while holding pernet->lockspinlock.Many thanks to Eulgyu Kim for providing a repro and testing our patches.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix stack-out-of-bounds write in devmapget_upper_ifindexes() iterates over all upper devices and writes theirindices into an array without checking bounds.Also the callers assume that the max number of upper devices isMAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,but that assumption is not correct and the number of upper devices couldbe larger than MAX_NEST_DEV (e.g., many macvlans), causing astack-out-of-bounds write.Add a max parameter to get_upper_ifindexes() to avoid the issue.When there are too many upper devices, return -EOVERFLOW and abort theredirect.To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device withan XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.Then send a packet to the device to trigger the XDP redirect path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_netem: fix out-of-bounds access in packet corruptionIn netem_enqueue(), the packet corruption logic usesget_random_u32_below(skb_headlen(skb)) to select an index formodifying skb->data. When an AF_PACKET TX_RING sends fully non-linearpackets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.Passing 0 to get_random_u32_below() takes the variable-ceil slow pathwhich returns an unconstrained 32-bit random integer. Using thisunconstrained value as an offset into skb->data results in anout-of-bounds memory access.Fix this by verifying skb_headlen(skb) is non-zero before attemptingto corrupt the linear data area. Fully non-linear packets will silentlybypass the corruption logic.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: only handle RESPONSE during service challengeOnly process RESPONSE packets while the service connection is still inRXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock beforerunning response verification and security initialization, then use a localsecured flag to decide whether to queue the secured-connection work afterthe state transition. This keeps duplicate or late RESPONSE packets fromre-running the setup path and removes the unlocked post-transition statetest.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in util-linux. Improper hostname canonicalization in the `login(1)` utility, when invoked with the `-h` option, can modify the supplied remote hostname before setting `PAM_RHOST`. A remote attacker could exploit this by providing a specially crafted hostname, potentially bypassing host-based Pluggable Authentication Modules (PAM) access control rules that rely on fully qualified domain names. This could lead to unauthorized access.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libblkid1 > 0-0 (version in image is 2.39.3-150600.4.21.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: reject direct access to nullable PTR_TO_BUF pointerscheck_mem_access() matches PTR_TO_BUF via base_type() which stripsPTR_MAYBE_NULL, allowing direct dereference without a null check.Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL.On stop callbacks these are NULL, causing a kernel NULL dereference.Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching theexisting PTR_TO_BTF_ID pattern.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: atmel-sha204a - Fix potential UAF and memory leak in remove pathUnregister the hwrng to prevent new ->read() calls and flush the AtmelI2C workqueue before teardown to prevent a potential UAF if a queuedcallback runs while the device is being removed.Drop the early return to ensure sysfs entries are removed and->hwrng.priv is freed, preventing a memory leak.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/bugs: Make Safe-RET robust against interrupt injectionAn attacker injecting interrupts while the Safe-RET mitigation executeson machines affected by SRSO can neutralize the safe return sequence,potentially leading to data leakage through speculative execution.Fixup register state as if the Safe-RET sequence executed successfullyby "emulating" it, in a manner of speaking, and avoid executing a RETinstruction after returning from the interrupt.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:IB/isert: Reject login PDUs shorter than ISER_HEADERS_LENIn drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done()computes the login request payload length as wc->byte_len minusISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int.A remote iSER initiator can post a login Send work request carryingfewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflowsand login_req_len becomes negative.isert_rx_login_req() then reads that negative length back into a signedint, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because themin() is signed it keeps the negative value; the value is then passed asthe memcpy() length and sign-extended to a multi-gigabyte size_t. Thecopy into the 8192-byte login->req_buf runs far out of bounds andfaults, crashing the target node. The login phase precedes iSCSIauthentication, so no credentials are required to reach this path.Reject any login PDU shorter than ISER_HEADERS_LEN before thesubtraction, mirroring the existing early return on a failed workcompletion, so login_req_len can never go negative. The upper bound wasalready safe: a posted login buffer cannot deliver more thanISER_RX_PAYLOAD_SIZE, so the difference stays at or belowMAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missinglower bound needs to be added.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/srp: bound SRP_RSP sense copy by the received lengthsrp_process_rsp() copies sense data from rsp->data + resp_data_len,where resp_data_len is the full 32-bit value supplied by the SRP targetand is never checked against the number of bytes actually received(wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, soat most 96 bytes are copied, but the source offset is not bounded.A malicious or compromised SRP target on the InfiniBand/RoCE fabric thatthe initiator has logged into can return an SRP_RSP withSRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive bufferis allocated at the target-chosen max_ti_iu_len, so the source of thesense copy lands past the bytes actually received; with resp_data_lennear 0xFFFFFFFF it is gigabytes past the buffer and the read faults.Copy the sense data only if it has not been truncated, that is, only ifthe response header, the response data, and the sense region fit withinthe bytes actually received; otherwise drop the sense and log. Thein-tree iSER and NVMe-RDMA receive paths already bound their parse bywc->byte_len; this brings ib_srp into line with them.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mvpp2: refill RX buffers before XDP or skb useThe RX error path returns the current descriptor buffer to the hardwareBM pool. That is only valid while the driver still owns the buffer.mvpp2_rx_refill() can fail after the current buffer has been handed toXDP or attached to an skb. In those cases mvpp2_run_xdp() may haverecycled, redirected, or queued the page for XDP_TX, and an skb free alsoretires the data buffer. Returning such a buffer to BM lets hardware DMAinto memory that is no longer owned by the RX ring.Refill the BM pool before handing the current buffer to XDP or to theskb. If the allocation fails there, drop the packet and return thestill-owned current buffer to BM, preserving the pool depth. Once therefill succeeds, later local drops retire/free the current buffer insteadof returning it to BM.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: fix uninit-value in __sctp_rcv_asconf_lookup()__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONFchunk can hold the ADDIP header and a parameter header, then callsaf->from_addr_param(), which reads the full address (16 bytes for IPv6)trusting the parameter's declared length.An unauthenticated peer can send a truncated trailing ASCONF chunk thatdeclares an IPv6 address parameter but stops after the 4-byte parameterheader; reached from the no-association lookup path, from_addr_param() thenreads uninitialized bytes past the parameter.Impact: an unauthenticated SCTP peer makes the receive path read up to 16bytes of uninitialized memory past a truncated ASCONF address parameter.The sibling __sctp_rcv_init_lookup() bounds parameters withsctp_walk_params(); this path open-codes the fetch and omits the bound.Verify the whole address parameter lies within the chunk beforefrom_addr_param() reads it, the same class of fix as commit 51e5ad549c43("net: sctp: fix KMSAN uninit-value in sctp_inq_pop").
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: use opener credentials for ADS I/OAlternate data streams are stored as xattrs. Unlike regular file I/O,their read and write paths therefore call VFS xattr helpers which recheckinode permissions and LSM policy using the current task credentials.Run ADS I/O with the credentials captured when the SMB handle was opened.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pipe: wakeup wr_wait after setting max_usageCommit c73be61cede5 ("pipe: Add general notification queue support") aregression was introduced that would lock up resized pipes under certainconditions. See the reproducer in [1].The commit resizing the pipe ring size was moved to a differentfunction, doing that moved the wakeup for pipe->wr_wait before actuallyraising pipe->max_usage. If a pipe was full before the resize occured itwould result in the wakeup never actually triggering pipe_write.Set @max_usage and @nr_accounted before waking writers if this isn't awatch queue.[Christian Brauner : rewrite to account for watch queues]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sysv: don't call sb_bread() with pointers_lock heldsyzbot is reporting sleep in atomic context in SysV filesystem [1], forsb_bread() is called with rw_spinlock held.A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bugand a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by"Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12.Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed theformer bug by moving pointers_lock lock to the callers, but insteadintroduced a "sb_bread() with read_lock(&pointers_lock)" bug (which madethis problem easier to hit).Al Viro suggested that why not to do like get_branch()/get_block()/find_shared() in Minix filesystem does. And doing like that is almost arevert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch() from with find_shared() is called without write_lock(&pointers_lock).
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix potential deadlock when releasing midsAll release_mid() callers seem to hold a reference of @mid so there isno need to call kref_put(&mid->refcount, __release_mid) under@server->mid_lock spinlock. If they don't, then an use-after-free bugwould have occurred anyways.By getting rid of such spinlock also fixes a potential deadlock asshown belowCPU 0 CPU 1------------------------------------------------------------------cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock*
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-mq: make sure active queue usage is held for bio_integrity_prep()blk_integrity_unregister() can come if queue usage counter isn't heldfor one bio with integrity prepared, so this request may be completed withcalling profile->complete_fn, then kernel panic.Another constraint is that bio_integrity_prep() needs to be calledbefore bio merge.Fix the issue by:- call bio_integrity_prep() with one queue usage counter grabbed reliably- call bio_integrity_prep() before bio merge
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:llc: verify mac len before reading mac headerLLC reads the mac header with eth_hdr without verifying that the skbhas an Ethernet header.Syzbot was able to enter llc_rcv on a tun device. Tun can insertpackets without mac len and with user configurable skb->protocol(passing a tun_pi header when not configuring IFF_NO_PI). BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002Add a mac_len test before all three eth_hdr(skb) calls under net/llc.There are further uses in include/net/llc_pdu.h. All these areprotected by a test skb->protocol == ETH_P_802_2. Which does notprotect against this tun scenario.But the mac_len test added in this patch in llc_fixup_skb willindirectly protect those too. That is called from llc_rcv before anyother LLC code.It is tempting to just add a blanket mac_len check in llc_rcv, butnot sure whether that could break valid LLC paths that do not assumean Ethernet header. 802.2 LLC may be used on top of non-802.3protocols in principle. The below referenced commit shows that usedto, on top of Token Ring.At least one of the three eth_hdr uses goes back to before the startof git history. But the one that syzbot exercises is introduced inthis commit. That commit is old enough (2008), that effectively allstable kernels should receive this.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tipc: Change nla_policy for bearer-related names to NLA_NUL_STRINGsyzbot reported the following uninit-value access issue [1]:=====================================================BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756 strlen lib/string.c:418 [inline] strstr+0xb8/0x2f0 lib/string.c:756 tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595 genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline] genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcdUninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline] netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcdTIPC bearer-related names including link names must be null-terminatedstrings. If a link name which is not null-terminated is passed throughnetlink, strstr() and similar functions can cause buffer overrun. Thiscauses the above issue.This patch changes the nla_policy for bearer-related names from NLA_STRINGto NLA_NUL_STRING. This resolves the issue by ensuring that onlynull-terminated strings are accepted as bearer-related names.syzbot reported similar uninit-value issue related to bearer names [2]. Theroot cause of this issue is that a non-null-terminated bearer name waspassed. This patch also resolved this issue.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ARM: 9317/1: kexec: Make smp stop calls asynchronousIf a panic is triggered by a hrtimer interrupt all online cpus will benotified and set offline. But as highlighted by commit 19dbdcb8039c("smp: Warn on function calls from softirq context") this call shouldnot be made synchronous with disabled interrupts: softdog: Initiating panic Kernel panic - not syncing: Software Watchdog Timer expired WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond unwind_backtrace: show_stack dump_stack_lvl __warn warn_slowpath_fmt smp_call_function_many_cond smp_call_function crash_smp_send_stop.part.0 machine_crash_shutdown __crash_kexec panic softdog_fire __hrtimer_run_queues hrtimer_interruptMake the smp call for machine_crash_nonpanic_core() asynchronous.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui()During NVMeTCP Authentication a controller can trigger a kerneloops by specifying the 8192 bit Diffie Hellman group and passinga correctly sized, but zeroed Diffie Hellamn value.mpi_cmp_ui() was detecting this if the second parameter was 0,but 1 is passed from dh_is_pubkey_valid(). This causes the nullpointer u->d to be dereferenced towards the end of mpi_cmp_ui()
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: ocb: don't leave if not joinedIf there's no OCB state, don't ask the driver/mac80211 toleave, since that's just confusing. Since set/clear thechandef state, that's a simple check.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-cgroup: hold queue_lock when removing blkg->q_nodeWhen blkg is removed from q->blkg_list from blkg_free_workfn(), queue_lockhas to be held, otherwise, all kinds of bugs(list corruption, hard lockup,..) can be triggered from blkg_destroy_all().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix memory leak of iter->temp when reading trace_pipekmemleak reports: unreferenced object 0xffff88814d14e200 (size 256): comm "cat", pid 336, jiffies 4294871818 (age 779.490s) hex dump (first 32 bytes): 04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00 ................ 0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff .........Z...... backtrace: [] __kmalloc+0x4f/0x140 [] trace_find_next_entry+0xbb/0x1d0 [] trace_print_lat_context+0xaf/0x4e0 [] print_trace_line+0x3e0/0x950 [] tracing_read_pipe+0x2d9/0x5a0 [] vfs_read+0x143/0x520 [] ksys_read+0xbd/0x160 [] do_syscall_64+0x3f/0x90 [] entry_SYSCALL_64_after_hwframe+0x6e/0xd8when reading file 'trace_pipe', 'iter->temp' is allocated or relocatedin trace_find_next_entry() but not freed before 'trace_pipe' is closed.To fix it, free 'iter->temp' in tracing_release_pipe().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/hyperv: Disable IBT when hypercall page lacks ENDBR instructionOn hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMswith ConfigVersion 9.3 or later support IBT in the guest. However,current versions of Hyper-V have a bug in that there's not an ENDBR64instruction at the beginning of the hypercall page. Since hypercalls aremade with an indirect call to the hypercall page, all hypercall attemptsfail with an exception and Linux panics.A Hyper-V fix is in progress to add ENDBR64. But guard against the Linuxpanic by clearing X86_FEATURE_IBT if the hypercall page doesn't startwith ENDBR. The VM will boot and run without IBT.If future Linux 32-bit kernels were to support IBT, additional hypercallpage hackery would be needed to make IBT work for such kernels in aHyper-V VM.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:llc: call sock_orphan() at release timesyzbot reported an interesting trace [1] caused by a stale sk->sk_wqpointer in a closed llc socket.In commit ff7b11aa481f ("net: socket: set sock->sk to NULL aftercalling proto_ops::release()") Eric Biggers hinted that some protocolsare missing a sock_orphan(), we need to perform a full audit.In net-next, I plan to clear sock->sk from sock_orphan() andamend Eric patch to add a warning.[1] BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline] BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline] BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline] BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27CPU: 1 PID: 27 Comm: ksoftirqd/1 Not tainted 6.8.0-rc1-syzkaller-00049-g6098d87eaf31 #0Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 list_empty include/linux/list.h:373 [inline] waitqueue_active include/linux/wait.h:127 [inline] sock_def_write_space_wfree net/core/sock.c:3384 [inline] sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 skb_release_head_state+0xa3/0x2b0 net/core/skbuff.c:1080 skb_release_all net/core/skbuff.c:1092 [inline] napi_consume_skb+0x119/0x2b0 net/core/skbuff.c:1404 e1000_unmap_and_free_tx_resource+0x144/0x200 drivers/net/ethernet/intel/e1000/e1000_main.c:1970 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3860 [inline] e1000_clean+0x4a1/0x26e0 drivers/net/ethernet/intel/e1000/e1000_main.c:3801 __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x956/0xe90 net/core/dev.c:6778 __do_softirq+0x21a/0x8de kernel/softirq.c:553 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x31/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x660/0xa10 kernel/smpboot.c:164 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 Allocated by task 5167: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_lru+0x142/0x6f0 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3019 [inline] sock_alloc_inode+0x25/0x1c0 net/socket.c:308 alloc_inode+0x5d/0x220 fs/inode.c:260 new_inode_pseudo+0x16/0x80 fs/inode.c:1005 sock_alloc+0x40/0x270 net/socket.c:634 __sock_create+0xbc/0x800 net/socket.c:1535 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x14c/0x260 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1718 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6bFreed by task 0: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x121/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inlin---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.syzbot reported a warning [0] in __unix_gc() with a repro, whichcreates a socketpair and sends one socket's fd to itself using thepeer. socketpair(AF_UNIX, SOCK_STREAM, 0, [3, 4]) = 0 sendmsg(4, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="\360", iov_len=1}], msg_iovlen=1, msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET, cmsg_type=SCM_RIGHTS, cmsg_data=[3]}], msg_controllen=24, msg_flags=0}, MSG_OOB|MSG_PROBE|MSG_DONTWAIT|MSG_ZEROCOPY) = 1This forms a self-cyclic reference that GC should finally untanglebut does not due to lack of MSG_OOB handling, resulting in memoryleak.Recently, commit 11498715f266 ("af_unix: Remove io_uring code forGC.") removed io_uring's dead code in GC and revealed the problem.The code was executed at the final stage of GC and unconditionallymoved all GC candidates from gc_candidates to gc_inflight_list.That papered over the reported problem by always making the followingWARN_ON_ONCE(!list_empty(&gc_candidates)) false.The problem has been there since commit 2aab4b969002 ("af_unix: fixstruct pid leaks in OOB support") added full scm support for MSG_OOBwhile fixing another bug.To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skbif the socket still exists in gc_candidates after purging collected skb.Then, we need to set NULL to oob_skb before calling kfree_skb() becauseit calls last fput() and triggers unix_release_sock(), where we callduplicate kfree_skb(u->oob_skb) if not NULL.Note that the leaked socket remained being linked to a global list, sokmemleak also could not detect it. We need to check /proc/net/protocolto notice the unfreed socket.[0]:WARNING: CPU: 0 PID: 2863 at net/unix/garbage.c:345 __unix_gc+0xc74/0xe80 net/unix/garbage.c:345Modules linked in:CPU: 0 PID: 2863 Comm: kworker/u4:11 Not tainted 6.8.0-rc1-syzkaller-00583-g1701940b1a02 #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024Workqueue: events_unbound __unix_gcRIP: 0010:__unix_gc+0xc74/0xe80 net/unix/garbage.c:345Code: 8b 5c 24 50 e9 86 f8 ff ff e8 f8 e4 22 f8 31 d2 48 c7 c6 30 6a 69 89 4c 89 ef e8 97 ef ff ff e9 80 f9 ff ff e8 dd e4 22 f8 90 <0f> 0b 90 e9 7b fd ff ff 48 89 df e8 5c e7 7c f8 e9 d3 f8 ff ff e8RSP: 0018:ffffc9000b03fba0 EFLAGS: 00010293RAX: 0000000000000000 RBX: ffffc9000b03fc10 RCX: ffffffff816c493eRDX: ffff88802c02d940 RSI: ffffffff896982f3 RDI: ffffc9000b03fb30RBP: ffffc9000b03fce0 R08: 0000000000000001 R09: fffff52001607f66R10: 0000000000000003 R11: 0000000000000002 R12: dffffc0000000000R13: ffffc9000b03fc10 R14: ffffc9000b03fc10 R15: 0000000000000001FS: 0000000000000000(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00005559c8677a60 CR3: 000000000d57a000 CR4: 00000000003506f0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: process_one_work+0x889/0x15e0 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x8b9/0x12a0 kernel/workqueue.c:2787 kthread+0x2c6/0x3b0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fpga: region: add owner module and take its refcountThe current implementation of the fpga region assumes that the low-levelmodule registers a driver for the parent device and uses its owner pointerto take the module's refcount. This approach is problematic since it canlead to a null pointer dereference while attempting to get the regionduring programming if the parent device does not have a driver.To address this problem, add a module owner pointer to the fpga_regionstruct and use it to take the module's refcount. Modify the functions forregistering a region to take an additional owner module parameter andrename them to avoid conflicts. Use the old function names for helpermacros that automatically set the module that registers the region as theowner. This ensures compatibility with existing low-level control modulesand reduces the chances of registering a region without setting the owner.Also, update the documentation to keep it consistent with the new interfacefor registering an fpga region.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix corruption during on-line resizeWe observed a corruption during on-line resize of a file system that islarger than 16 TiB with 4k block size. With having more then 2^32 blocksresize_inode is turned off by default by mke2fs. The issue can bereproduced on a smaller file system for convenience by explicitlyturning off resize_inode. An on-line resize across an 8 GiB boundary (thesize of a meta block group in this setup) then leads to a corruption: dev=/dev/ # should be >= 16 GiB mkdir -p /corruption /sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15)) mount -t ext4 $dev /corruption dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15)) sha1sum /corruption/test # 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test /sbin/resize2fs $dev $((2*2**21)) # drop page cache to force reload the block from disk echo 1 > /proc/sys/vm/drop_caches sha1sum /corruption/test # 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks perblock group and 2^6 are the number of block groups that make a metablock group.The last checksum might be different depending on how the file is laidout across the physical blocks. The actual corruption occurs at physicalblock 63*2^15 = 2064384 which would be the location of the backup of themeta block group's block descriptor. During the on-line resize the filesystem will be converted to meta_bg starting at s_first_meta_bg which is2 in the example - meaning all block groups after 16 GiB. However, inext4_flex_group_add we might add block groups that are not part of thefirst meta block group yet. In the reproducer we achieved this bysubstracting the size of a whole block group from the point where themeta block group would start. This must be considered when updating thebackup block group descriptors to follow the non-meta_bg layout. The fixis to add a test whether the group to add is already part of the metablock group or not.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/net: fix overflow check in io_recvmsg_mshot_prep()The "controllen" variable is type size_t (unsigned long). Casting itto int could lead to an integer underflow.The check_add_overflow() function considers the type of the destinationwhich is type int. If we add two positive values and the result cannotfit in an integer then that's counted as an overflow.However, if we cast "controllen" to an int and it turns negative, thennegative values *can* fit into an int type so there is no overflow.Good: 100 + (unsigned long)-4 = 96 <-- overflow Bad: 100 + (int)-4 = 96 <-- no overflowI deleted the cast of the sizeof() as well. That's not a bug but thecast is unnecessary.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring: Fix release of pinned pages when __io_uaddr_map failsLooking at the error path of __io_uaddr_map, if we fail after pinningthe pages for any reasons, ret will be set to -EINVAL and the errorhandler won't properly release the pinned pages.I didn't manage to trigger it without forcing a failure, but it canhappen in real life when memory is heavily fragmented.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:eeprom: at24: fix memory corruption race conditionIf the eeprom is not accessible, an nvmem device will be registered, theread will fail, and the device will be torn down. If another driveraccesses the nvmem device after the teardown, it will referenceinvalid memory.Move the failure point before registering the nvmem device.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:icmp: prevent possible NULL dereferences from icmp_build_probe()First problem is a double call to __in_dev_get_rcu(), becausethe second one could return NULL.if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)Second problem is a read from dev->ip6_ptr with no NULL check:if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list))Use the correct RCU API to fix these.v2: add missing include
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/kbuf: hold io_buffer_list reference over mmapIf we look up the kbuf, ensure that it doesn't get unregistered untilafter we're done with it. Since we're inside mmap, we cannot safely usethe io_uring lock. Rely on the fact that we can lookup the buffer listunder RCU now and grab a reference to it, preventing it from beingunregistered until we're done with it. The lookup returns theio_buffer_list directly with it referenced.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udp: do not accept non-tunnel GSO skbs landing in a tunnelWhen rx-udp-gro-forwarding is enabled UDP packets might be GROed whenbeing forwarded. If such packets might land in a tunnel this can causevarious issues and udp_gro_receive makes sure this isn't the case bylooking for a matching socket. This is performed inudp4/6_gro_lookup_skb but only in the current netns. This is an issuewith tunneled packets when the endpoint is in another netns. In suchcases the packets will be GROed at the UDP level, which leads to variousissues later on. The same thing can happen with rx-gro-list.We saw this with geneve packets being GROed at the UDP level. In suchcase gso_size is set; later the packet goes through the geneve rx path,the geneve header is pulled, the offset are adjusted and frag_list skbsare not adjusted with regard to geneve. When those skbs hitskb_fragment, it will misbehave. Different outcomes are possibledepending on what the GROed skbs look like; from corrupted packets tokernel crashes.One example is a BUG_ON[1] triggered in skb_segment while processing thefrag_list. Because gso_size is wrong (geneve header was pulled)skb_segment thinks there is "geneve header size" of data in frag_list,although it's in fact the next packet. The BUG_ON itself has nothing todo with the issue. This is only one of the potential issues.Looking up for a matching socket in udp_gro_receive is fragile: thelookup could be extended to all netns (not speaking about performances)but nothing prevents those packets from being modified in between and wecould still not find a matching socket. It's OK to keep the currentlogic there as it should cover most cases but we also need to make surewe handle tunnel packets being GROed too early.This is done by extending the checks in udp_unexpected_gso: GSO packetslacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel mustbe segmented.[1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: Fix infinite recursion in fib6_dump_done().syzkaller reported infinite recursive calls of fib6_dump_done() duringnetlink socket destruction. [1]From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and thenthe response was generated. The following recvmmsg() resumed the dumpfor IPv6, but the first call of inet6_dump_fib() failed at kzalloc() dueto the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8)Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next callof inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stoppedreceiving the response halfway through, and finally netlink_sock_destruct()called nlk_sk(sk)->cb.done().fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if itis still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() bynlk_sk(sk)->cb.args[3], but it has the same function, not NULL, callingitself recursively and hitting the stack guard page.To avoid the issue, let's set the destructor after kzalloc().[0]:FAULT_INJECTION: forcing a failure.name failslab, interval 1, probability 0, space 0, times 0CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014Call Trace: dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034)[1]:BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb)stack guard page: 0000 [#1] PREEMPT SMP KASANCPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014Workqueue: events netlink_sock_destruct_workRIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570)Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ffRSP: 0018:ffffc9000d980000 EFLAGS: 00010293RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0PKRU: 55555554Call Trace: <#DF> #DF> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()qdisc_tree_reduce_backlog() is called with the qdisc lock held,not RTNL.We must use qdisc_lookup_rcu() instead of qdisc_lookup()syzbot reported:WARNING: suspicious RCU usage6.1.74-syzkaller #0 Not tainted-----------------------------net/sched/sch_api.c:305 suspicious rcu_dereference_protected() usage!other info that might help us debug this:rcu_scheduler_active = 2, debug_locks = 13 locks held by udevd/1142: #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: net_tx_action+0x64a/0x970 net/core/dev.c:5282 #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline] #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: net_tx_action+0x754/0x970 net/core/dev.c:5297 #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline] #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: qdisc_tree_reduce_backlog+0x84/0x580 net/sched/sch_api.c:792stack backtrace:CPU: 1 PID: 1142 Comm: udevd Not tainted 6.1.74-syzkaller #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024Call Trace: [] __dump_stack lib/dump_stack.c:88 [inline] [] dump_stack_lvl+0x1b1/0x28f lib/dump_stack.c:106 [] dump_stack+0x15/0x1e lib/dump_stack.c:113 [] lockdep_rcu_suspicious+0x1b9/0x260 kernel/locking/lockdep.c:6592 [] qdisc_lookup+0xac/0x6f0 net/sched/sch_api.c:305 [] qdisc_tree_reduce_backlog+0x243/0x580 net/sched/sch_api.c:811 [] pfifo_tail_enqueue+0x32c/0x4b0 net/sched/sch_fifo.c:51 [] qdisc_enqueue include/net/sch_generic.h:833 [inline] [] netem_dequeue+0xeb3/0x15d0 net/sched/sch_netem.c:723 [] dequeue_skb net/sched/sch_generic.c:292 [inline] [] qdisc_restart net/sched/sch_generic.c:397 [inline] [] __qdisc_run+0x249/0x1e60 net/sched/sch_generic.c:415 [] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [] net_tx_action+0x7c9/0x970 net/core/dev.c:5313 [] __do_softirq+0x2bd/0x9bd kernel/softirq.c:616 [] invoke_softirq kernel/softirq.c:447 [inline] [] __irq_exit_rcu+0xca/0x230 kernel/softirq.c:700 [] irq_exit_rcu+0x9/0x20 kernel/softirq.c:712 [] sysvec_apic_timer_interrupt+0x42/0x90 arch/x86/kernel/apic/apic.c:1107 [] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:656
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: validate user input for expected lengthI got multiple syzbot reports showing old bugs exposedby BPF after commit 20f2505fb436 ("bpf: Try to avoid kzallocin cgroup/{s,g}etsockopt")setsockopt() @optlen argument should be taken into accountbefore copying data. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7aRIP: 0033:0x7fd22067dde9Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8 Allocated by task 7238: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:4069 [inline] __kmalloc_noprof+0x200/0x410 mm/slub.c:4082 kmalloc_noprof include/linux/slab.h:664 [inline] __cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7aThe buggy address belongs to the object at ffff88802cd73da0 which belongs to the cache kmalloc-8 of size 8The buggy address is located 0 bytes inside of allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1)The buggy address belongs to the physical page:page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff)page_type: 0xffffefff(slab)raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122raw: ffff88802cd73020 000000008080007f 00000001ffffefff 00---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()nft_unregister_flowtable_type() within nf_flow_inet_module_exit() canconcurrent with __nft_flowtable_type_get() within nf_tables_newflowtable().And thhere is not any protection when iterate over nf_tables_flowtableslist in __nft_flowtable_type_get(). Therefore, there is pertentialdata-race of nf_tables_flowtables list entry.Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables listin __nft_flowtable_type_get(), and use rcu_read_lock() in the callernft_flowtable_type_get() to protect the entire type query process.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: reject new basechain after table flag updateWhen dormant flag is toggled, hooks are disabled in the commit phase byiterating over current chains in table (existing and new).The following configuration allows for an inconsistent state: add table x add chain x y { type filter hook input priority 0; } add table x { flags dormant; } add chain x w { type filter hook input priority 1; }which triggers the following warning when trying to unregister chain wwhich is already unregistered.[ 127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50 1 __nf_unregister_net_hook+0x21a/0x260[...][ 127.322519] Call Trace:[ 127.322521] [ 127.322524] ? __warn+0x9f/0x1a0[ 127.322531] ? __nf_unregister_net_hook+0x21a/0x260[ 127.322537] ? report_bug+0x1b1/0x1e0[ 127.322545] ? handle_bug+0x3c/0x70[ 127.322552] ? exc_invalid_op+0x17/0x40[ 127.322556] ? asm_exc_invalid_op+0x1a/0x20[ 127.322563] ? kasan_save_free_info+0x3b/0x60[ 127.322570] ? __nf_unregister_net_hook+0x6a/0x260[ 127.322577] ? __nf_unregister_net_hook+0x21a/0x260[ 127.322583] ? __nf_unregister_net_hook+0x6a/0x260[ 127.322590] ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables][ 127.322655] nft_table_disable+0x75/0xf0 [nf_tables][ 127.322717] nf_tables_commit+0x2571/0x2620 [nf_tables]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:block: prevent division by zero in blk_rq_stat_sum()The expression dst->nr_samples + src->nr_samples mayhave zero value on overflow. It is necessary to adda check to avoid division by zero.Found by Linux Verification Center (linuxtesting.org) with Svace.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:af_unix: Clear stale u->oob_skb.syzkaller started to report deadlock of unix_gc_lock after commit4090fa373f0e ("af_unix: Replace garbage collection algorithm."), butit just uncovers the bug that has been there since commit 314001f0bf92("af_unix: Add OOB support").The repro basically does the following. from socket import * from array import array c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue c2.close() # done async and unblock recv() c1.close() # done async and trigger GCA socket sends its file descriptor to itself as OOB data and tries toreceive normal data, but finally recv() fails due to async close().The problem here is wrong handling of OOB skb in manage_oob(). Whenrecvmsg() is called without MSG_OOB, manage_oob() is called to checkif the peeked skb is OOB skb. In such a case, manage_oob() pops itout of the receive queue but does not clear unix_sock(sk)->oob_skb.This is wrong in terms of uAPI.Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB.The 'o' is handled as OOB data. When recv() is called twice withoutMSG_OOB, the OOB data should be lost. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0) >>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data 5 >>> c1.send(b'world') 5 >>> c2.recv(5) # OOB data is not received b'hell' >>> c2.recv(5) # OOB date is skipped b'world' >>> c2.recv(5, MSG_OOB) # This should return an error b'o'In the same situation, TCP actually returns -EINVAL for the lastrecv().Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always setEPOLLPRI even though the data has passed through by previous recv().To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuingit from recv queue.The reason why the old GC did not trigger the deadlock is because theold GC relied on the receive queue to detect the loop.When it is triggered, the socket with OOB data is marked as GC candidatebecause file refcount == inflight count (1). However, after traversingall inflight sockets, the socket still has a positive inflight count (1),thus the socket is excluded from candidates. Then, the old GC lose thechance to garbage-collect the socket.With the old GC, the repro continues to create true garbage that willnever be freed nor detected by kmemleak as it's linked to the globalinflight list. That's why we couldn't even notice the issue.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RINGsyzbot reported an illegal copy in xsk_setsockopt() [1]Make sure to validate setsockopt() @optlen parameter.[1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420Read of size 4 at addr ffff888028c6cde3 by task syz-executor.0/7549CPU: 0 PID: 7549 Comm: syz-executor.0 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75RIP: 0033:0x7fb40587de69Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007fb40665a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036RAX: ffffffffffffffda RBX: 00007fb4059abf80 RCX: 00007fb40587de69RDX: 0000000000000005 RSI: 000000000000011b RDI: 0000000000000006RBP: 00007fb4058ca47a R08: 0000000000000002 R09: 0000000000000000R10: 0000000020001980 R11: 0000000000000246 R12: 0000000000000000R13: 000000000000000b R14: 00007fb4059abf80 R15: 00007fff57ee4d08 Allocated by task 7549: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3966 [inline] __kmalloc+0x233/0x4a0 mm/slub.c:3979 kmalloc include/linux/slab.h:632 [inline] __cgroup_bpf_run_filter_setsockopt+0xd2f/0x1040 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75The buggy address belongs to the object at ffff888028c6cde0 which belongs to the cache kmalloc-8 of size 8The buggy address is located 1 bytes to the right of allocated 2-byte region [ffff888028c6cde0, ffff888028c6cde2)The buggy address belongs to the physical page:page:ffffea0000a31b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888028c6c9c0 pfn:0x28c6canon flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff)page_type: 0xffffffff()raw: 00fff00000000800 ffff888014c41280 0000000000000000 dead000000000001raw: ffff888028c6c9c0 0000000080800057 00000001ffffffff 0000000000000000page dumped because: kasan: bad access detectedpage_owner tracks the page as allocatedpage last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 6648, tgid 6644 (syz-executor.0), ts 133906047828, free_ts 133859922223 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533 prep_new_page mm/page_alloc.c:---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: honor table dormant flag from netdev release event pathCheck for table dormant flag otherwise netdev release event path triesto unregister an already unregistered hook.[524854.857999] ------------[ cut here ]------------[524854.858010] WARNING: CPU: 0 PID: 3386599 at net/netfilter/core.c:501 __nf_unregister_net_hook+0x21a/0x260[...][524854.858848] CPU: 0 PID: 3386599 Comm: kworker/u32:2 Not tainted 6.9.0-rc3+ #365[524854.858869] Workqueue: netns cleanup_net[524854.858886] RIP: 0010:__nf_unregister_net_hook+0x21a/0x260[524854.858903] Code: 24 e8 aa 73 83 ff 48 63 43 1c 83 f8 01 0f 85 3d ff ff ff e8 98 d1 f0 ff 48 8b 3c 24 e8 8f 73 83 ff 48 63 43 1c e9 26 ff ff ff <0f> 0b 48 83 c4 18 48 c7 c7 00 68 e9 82 5b 5d 41 5c 41 5d 41 5e 41[524854.858914] RSP: 0018:ffff8881e36d79e0 EFLAGS: 00010246[524854.858926] RAX: 0000000000000000 RBX: ffff8881339ae790 RCX: ffffffff81ba524a[524854.858936] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881c8a16438[524854.858945] RBP: ffff8881c8a16438 R08: 0000000000000001 R09: ffffed103c6daf34[524854.858954] R10: ffff8881e36d79a7 R11: 0000000000000000 R12: 0000000000000005[524854.858962] R13: ffff8881c8a16000 R14: 0000000000000000 R15: ffff8881351b5a00[524854.858971] FS: 0000000000000000(0000) GS:ffff888390800000(0000) knlGS:0000000000000000[524854.858982] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[524854.858991] CR2: 00007fc9be0f16f4 CR3: 00000001437cc004 CR4: 00000000001706f0[524854.859000] Call Trace:[524854.859006] [524854.859013] ? __warn+0x9f/0x1a0[524854.859027] ? __nf_unregister_net_hook+0x21a/0x260[524854.859044] ? report_bug+0x1b1/0x1e0[524854.859060] ? handle_bug+0x3c/0x70[524854.859071] ? exc_invalid_op+0x17/0x40[524854.859083] ? asm_exc_invalid_op+0x1a/0x20[524854.859100] ? __nf_unregister_net_hook+0x6a/0x260[524854.859116] ? __nf_unregister_net_hook+0x21a/0x260[524854.859135] nf_tables_netdev_event+0x337/0x390 [nf_tables][524854.859304] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables][524854.859461] ? packet_notifier+0xb3/0x360[524854.859476] ? _raw_spin_unlock_irqrestore+0x11/0x40[524854.859489] ? dcbnl_netdevice_event+0x35/0x140[524854.859507] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables][524854.859661] notifier_call_chain+0x7d/0x140[524854.859677] unregister_netdevice_many_notify+0x5e1/0xae0
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: check for NULL idev in ip_route_use_hint()syzbot was able to trigger a NULL deref in fib_validate_source()in an old tree [1].It appears the bug exists in latest trees.All calls to __in_dev_get_rcu() must be checked for a NULL result.[1]general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASANKASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bfRSP: 0018:ffffc900015fee40 EFLAGS: 00010246RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rulesrx_create no longer allocates a modify_hdr instance that needs to becleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointerdereference. A leak in the rules also previously occurred since there arenow two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 Call Trace: ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fpga: bridge: add owner module and take its refcountThe current implementation of the fpga bridge assumes that the low-levelmodule registers a driver for the parent device and uses its owner pointerto take the module's refcount. This approach is problematic since it canlead to a null pointer dereference while attempting to get the bridge ifthe parent device does not have a driver.To address this problem, add a module owner pointer to the fpga_bridgestruct and use it to take the module's refcount. Modify the function forregistering a bridge to take an additional owner module parameter andrename it to avoid conflicts. Use the old function name for a helper macrothat automatically sets the module that registers the bridge as the owner.This ensures compatibility with existing low-level control modules andreduces the chances of registering a bridge without setting the owner.Also, update the documentation to keep it consistent with the new interfacefor registering an fpga bridge.Other changes: opportunistically move put_device() from __fpga_bridge_get()to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity sincethe bridge device is taken in these functions.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm: use memalloc_nofs_save() in page_cache_ra_order()See commit f2c817bed58d ("mm: use memalloc_nofs_save in readahead path"),ensure that page_cache_ra_order() do not attempt to reclaim file-backedpages too, or it leads to a deadlock, found issue when test ext4 largefolio. INFO: task DataXceiver for:7494 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:DataXceiver for state:D stack:0 pid:7494 ppid:1 flags:0x00000200 Call trace: __switch_to+0x14c/0x240 __schedule+0x82c/0xdd0 schedule+0x58/0xf0 io_schedule+0x24/0xa0 __folio_lock+0x130/0x300 migrate_pages_batch+0x378/0x918 migrate_pages+0x350/0x700 compact_zone+0x63c/0xb38 compact_zone_order+0xc0/0x118 try_to_compact_pages+0xb0/0x280 __alloc_pages_direct_compact+0x98/0x248 __alloc_pages+0x510/0x1110 alloc_pages+0x9c/0x130 folio_alloc+0x20/0x78 filemap_alloc_folio+0x8c/0x1b0 page_cache_ra_order+0x174/0x308 ondemand_readahead+0x1c8/0x2b8 page_cache_async_ra+0x68/0xb8 filemap_readahead.isra.0+0x64/0xa8 filemap_get_pages+0x3fc/0x5b0 filemap_splice_read+0xf4/0x280 ext4_file_splice_read+0x2c/0x48 [ext4] vfs_splice_read.part.0+0xa8/0x118 splice_direct_to_actor+0xbc/0x288 do_splice_direct+0x9c/0x108 do_sendfile+0x328/0x468 __arm64_sys_sendfile64+0x8c/0x148 invoke_syscall+0x4c/0x118 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x4c/0x1f8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:e1000e: change usleep_range to udelay in PHY mdic accessThis is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaroundfor sporadic MDI error on Meteor Lake systems"). The referenced commitused usleep_range inside the PHY access routines, which are sometimescalled from an atomic context. This can lead to a kernel panic in somescenarios, such as cable disconnection and reconnection on vPro systems.Solve this by changing the usleep_range calls back to udelay.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: bnx2fc: Remove spin_lock_bh while releasing resources after uploadThe session resources are used by FW and driver when session is offloaded,once session is uploaded these resources are not used. The lock is notrequired as these fields won't be used any longer. The offload and uploadcalls are sequential, hence lock is not required.This will suppress following BUG_ON():[ 449.843143] ------------[ cut here ]------------[ 449.848302] kernel BUG at mm/vmalloc.c:2727![ 449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI[ 449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1Rebooting.[ 449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016[ 449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc][ 449.882910] RIP: 0010:vunmap+0x2e/0x30[ 449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41[ 449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206[ 449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005[ 449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000[ 449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf[ 449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000[ 449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0[ 449.953701] FS: 0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000[ 449.962732] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0[ 449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[ 449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400[ 449.993028] Call Trace:[ 449.995756] __iommu_dma_free+0x96/0x100[ 450.000139] bnx2fc_free_session_resc+0x67/0x240 [bnx2fc][ 450.006171] bnx2fc_upload_session+0xce/0x100 [bnx2fc][ 450.011910] bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc][ 450.018136] fc_rport_work+0x103/0x5b0 [libfc][ 450.023103] process_one_work+0x1e8/0x3c0[ 450.027581] worker_thread+0x50/0x3b0[ 450.031669] ? rescuer_thread+0x370/0x370[ 450.036143] kthread+0x149/0x170[ 450.039744] ? set_kthread_struct+0x40/0x40[ 450.044411] ret_from_fork+0x22/0x30[ 450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls[ 450.048497] libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler[ 450.159753] ---[ end trace 712de2c57c64abc8 ]---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KEYS: trusted: Fix memory leak in tpm2_key_encode()'scratch' is never freed. Fix this by calling kfree() in the success, andin the error case.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fpga: manager: add owner module and take its refcountThe current implementation of the fpga manager assumes that the low-levelmodule registers a driver for the parent device and uses its owner pointerto take the module's refcount. This approach is problematic since it canlead to a null pointer dereference while attempting to get the manager ifthe parent device does not have a driver.To address this problem, add a module owner pointer to the fpga_managerstruct and use it to take the module's refcount. Modify the functions forregistering the manager to take an additional owner module parameter andrename them to avoid conflicts. Use the old function names for helpermacros that automatically set the module that registers the manager as theowner. This ensures compatibility with existing low-level control modulesand reduces the chances of registering a manager without setting the owner.Also, update the documentation to keep it consistent with the new interfacefor registering an fpga manager.Other changes: opportunistically move put_device() from __fpga_mgr_get() tofpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since themanager device is taken in these functions.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Add a timeout to acquire the command queue semaphorePrevent forced completion handling on an entry that has not yet beenassigned an index, causing an out of bounds access on idx = -22.Instead of waiting indefinitely for the sem, blocking flow now waits forindex to be allocated or a sem acquisition timeout before beginning thetimer for FW completion.Kernel log example:mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: bfa: Ensure the copied buf is NUL terminatedCurrently, we allocate a nbytes-sized kernel buffer and copy nbytes fromuserspace to that buffer. Later, we use sscanf on this buffer but we don'tensure that the string is terminated inside the buffer, this can lead toOOB read when using sscanf. Fix this issue by using memdup_user_nul insteadof memdup_user.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix verifier assumptions about socket->skThe verifier assumes that 'sk' field in 'struct socket' is validand non-NULL when 'socket' pointer itself is trusted and non-NULL.That may not be the case when socket was just created andpassed to LSM socket_accept hook.Fix this verifier assumption and adjust tests.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:stm class: Fix a double free in stm_register_device()The put_device(&stm->dev) call will trigger stm_device_release() whichfrees "stm" so the vfree(stm) on the next line is a double free.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.Hang on to the control IDs instead of pointers since those are correctlyhandled with locks.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: fix oops during rmmod"rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding:remove redundant NULL check in debugfs function"). Here are the relevantfunctions being called:bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); bonding_debug_root = NULL; <--------- SET TO NULL HERE bond_netlink_fini() rtnl_link_unregister() __rtnl_link_unregister() unregister_netdevice_many_notify() bond_uninit() bond_debug_unregister() (commit removed check for bonding_debug_root == NULL) debugfs_remove() simple_recursive_removal() down_write() -> OOPSHowever, reverting the bad commit does not solve the problem completelybecause the original code contains a race that could cause the sameoops, although it was much less likely to be triggered unintentionally:CPU1 rmmod bonding bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root);CPU2 echo -bond0 > /sys/class/net/bonding_masters bond_uninit() bond_debug_unregister() if (!bonding_debug_root)CPU1 bonding_debug_root = NULL;So do NOT revert the bad commit (since the removed checks were racyanyway), and instead change the order of actions taken during moduleremoval. The same oops can also happen if there is an error duringmodule init, so apply the same fix there.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/9p: fix uninit-value in p9_client_rpc()Syzbot with the help of KMSAN reported the following error:BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline]BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75Uninit was created at: __alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 p9_tag_alloc net/9p/client.c:278 [inline] p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641 p9_client_rpc+0x27e/0x1340 net/9p/client.c:688 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75If p9_check_errors() fails early in p9_client_rpc(), req->rc.tagwill not be properly initialized. However, trace_9p_client_res()ends up trying to print it out anyway before p9_client_rpc()finishes.Fix this issue by assigning default values to p9_fcall fieldssuch as 'tag' and (just in case KMSAN unearths something new) 'id'during the tag allocation stage.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring: check for non-NULL file pointer in io_file_can_poll()In earlier kernels, it was possible to trigger a NULL pointerdereference off the forced async preparation path, if no file hadbeen assigned. The trace leading to that looks as follows:BUG: kernel NULL pointer dereference, address: 00000000000000b0PGD 0 P4D 0Oops: 0000 [#1] PREEMPT SMPCPU: 67 PID: 1633 Comm: buf-ring-invali Not tainted 6.8.0-rc3+ #1Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 2/2/2022RIP: 0010:io_buffer_select+0xc3/0x210Code: 00 00 48 39 d1 0f 82 ae 00 00 00 48 81 4b 48 00 00 01 00 48 89 73 70 0f b7 50 0c 66 89 53 42 85 ed 0f 85 d2 00 00 00 48 8b 13 <48> 8b 92 b0 00 00 00 48 83 7a 40 00 0f 84 21 01 00 00 4c 8b 20 5bRSP: 0018:ffffb7bec38c7d88 EFLAGS: 00010246RAX: ffff97af2be61000 RBX: ffff97af234f1700 RCX: 0000000000000040RDX: 0000000000000000 RSI: ffff97aecfb04820 RDI: ffff97af234f1700RBP: 0000000000000000 R08: 0000000000200030 R09: 0000000000000020R10: ffffb7bec38c7dc8 R11: 000000000000c000 R12: ffffb7bec38c7db8R13: ffff97aecfb05800 R14: ffff97aecfb05800 R15: ffff97af2be5e000FS: 00007f852f74b740(0000) GS:ffff97b1eeec0000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00000000000000b0 CR3: 000000016deab005 CR4: 0000000000370ef0Call Trace: ? __die+0x1f/0x60 ? page_fault_oops+0x14d/0x420 ? do_user_addr_fault+0x61/0x6a0 ? exc_page_fault+0x6c/0x150 ? asm_exc_page_fault+0x22/0x30 ? io_buffer_select+0xc3/0x210 __io_import_iovec+0xb5/0x120 io_readv_prep_async+0x36/0x70 io_queue_sqe_fallback+0x20/0x260 io_submit_sqes+0x314/0x630 __do_sys_io_uring_enter+0x339/0xbc0 ? __do_sys_io_uring_register+0x11b/0xc50 ? vm_mmap_pgoff+0xce/0x160 do_syscall_64+0x5f/0x180 entry_SYSCALL_64_after_hwframe+0x46/0x4eRIP: 0033:0x55e0a110a67eCode: ba cc 00 00 00 45 31 c0 44 0f b6 92 d0 00 00 00 31 d2 41 b9 08 00 00 00 41 83 e2 01 41 c1 e2 04 41 09 c2 b8 aa 01 00 00 0f 05 90 89 30 eb a9 0f 1f 40 00 48 8b 42 20 8b 00 a8 06 75 af 85 f6because the request is marked forced ASYNC and has a bad file fd, andhence takes the forced async prep path.Current kernels with the request async prep cleaned up can no longer hitthis issue, but for ease of backporting, let's add this safety check inhere too as it really doesn't hurt. For both cases, this will inevitablyend with a CQE posted with -EBADF.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:virtiofs: use pages instead of pointer for kernel direct IOWhen trying to insert a 10MB kernel module kept in a virtio-fs with cachedisabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... ---[ end trace 0000000000000000 ]---The warning is triggered as follows:1) syscall finit_module() handles the module insertion and it invokeskernel_read_file() to read the content of the module first.2) kernel_read_file() allocates a 10MB buffer by using vmalloc() andpasses it to kernel_read(). kernel_read() constructs a kvec iter byusing iov_iter_kvec() and passes it to fuse_file_read_iter().3) virtio-fs disables the cache, so fuse_file_read_iter() invokesfuse_direct_io(). As for now, the maximal read size for kvec iter isonly limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, sofuse_direct_io() doesn't split the 10MB buffer. It saves the address andthe size of the 10MB-sized buffer in out_args[0] of a fuse request andpasses the fuse request to virtio_fs_wake_pending_and_unlock().4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() toqueue the request. Because virtiofs need DMA-able address, sovirtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer forall fuse args, copies these args into the bounce buffer and passed thephysical address of the bounce buffer to virtiofsd. The total length ofthese fuse args for the passed fuse request is about 10MB, socopy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter andit triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL;5) virtio_fs_enqueue_req() will retry the memory allocation in akworker, but it won't help, because kmalloc() will always return NULLdue to the abnormal size and finit_module() will hang forever.A feasible solution is to limit the value of max_read for virtio-fs, sothe length passed to kmalloc() will be limited. However it will affectthe maximal read size for normal read. And for virtio-fs write initiatedfrom kernel, it has the similar problem but now there is no way to limitfc->max_write in kernel.So instead of limiting both the values of max_read and max_write inkernel, introducing use_pages_for_kvec_io in fuse_conn and setting it astrue in virtiofs. When use_pages_for_kvec_io is enabled, fuse will usepages instead of pointer to pass the KVEC_IO data.After switching to pages for KVEC_IO data, these pages will be used forDMA through virtio-fs. If these pages are backed by vmalloc(),{flush|invalidate}_kernel_vmap_range() are necessary to flush orinvalidate the cache before the DMA operation. So add two new fields infuse_args_pages to record the base address of vmalloc area and thecondition indicating whether invalidation is needed. Perform the flushin fuse_get_user_pages() for write operations and the invalidation infuse_release_user_pages() for read operations.It may seem necessary to introduce another fie---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath12k: Fix for out-of bound access errorSelfgen stats are placed in a buffer using print_array_to_buf_index() function.Array length parameter passed to the function is too big, resulting in possibleout-of bound memory error.Decreasing buffer size by one fixes faulty upper bound of passed array.Discovered in coverity scan, CID 1600742 and CID 1600758
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_core: Disable works on hci_unregister_devThis make use of disable_work_* on hci_unregister_dev since the hci_dev isabout to be freed new submissions are not disarable.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: IO::Uncompress::Unzip versions before 2.215 for Perl propagate uncaught exception when parsing zip header with malformed DOS date._dosToUnixTime() decodes the local-file-header last-modification date field and calls Time::Local::timelocal() without an eval guard. A header whose date field decodes to an out-of-range month, day, or hour causes timelocal() to die.The exception propagates out of IO::Uncompress::Unzip->new($file) where callers expect undef plus $UnzipError.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- perl > 0-0 (version in image is 5.26.1-150300.17.20.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetimeAfter commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into structmd_bitmap_stats"), following panic is reported:Oops: general protection fault, probably for non-canonical addressRIP: 0010:bitmap_get_stats+0x2b/0xa0Call Trace: md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7eRoot cause is that bitmap_get_stats() can be called at anytime if mddevis still there, even if bitmap is destroyed, or not fully initialized.Deferenceing bitmap in this case can crash the kernel. Meanwhile, theabove commit start to deferencing bitmap->storage, make the problemeasier to trigger.Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: reject VHT opmode for unsupported channel widthsVHT operating mode notifications are not defined for channel widthsbelow 20 MHz. In particular, 5 MHz and 10 MHz are not valid under theVHT specification and must be rejected.Without this check, malformed notifications using these widths mayreach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due toinvalid input. This issue was reported by syzbot.Reject these unsupported widths early in sta_link_apply_parameters()when opmode_notif is used. The accepted set includes 20, 40, 80, 160,and 80+80 MHz, which are valid for VHT. While 320 MHz is not definedfor VHT, it is allowed to avoid rejecting HE or EHT clients that maystill send a VHT opmode notification.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: state: initialize state_ptrs earlier in xfrm_state_findIn case of preemption, xfrm_state_look_at will find a differentpcpu_id and look up states for that other CPU. If we matched a statefor CPU2 in the state_cache while the lookup started on CPU1, we willjump to "found", but the "best" state that we got will be ignored andwe will enter the "acquire" block. This block uses state_ptrs, whichisn't initialized at this point.Let's initialize state_ptrs just after taking rcu_read_lock. This willalso prevent a possible misuse in the future, if someone adjusts thisfunction.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommufd: Prevent ALIGN() overflowWhen allocating IOVA the candidate range gets aligned to the targetalignment. If the range is close to ULONG_MAX then the ALIGN() canwrap resulting in a corrupted iova.Open code the ALIGN() using get_add_overflow() to prevent this.This simplifies the checks as we don't need to check for length earliereither.Consolidate the two copies of this code under a single helper.This bug would allow userspace to create a mapping that overlaps with someother mapping or a reserved range.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: kcm: Fix race condition in kcm_unattach()syzbot found a race condition when kcm_unattach(psock)and kcm_release(kcm) are executed at the same time.kcm_unattach() is missing a check of the flagkcm->tx_stopped before calling queue_work().If the kcm has a reserved psock, kcm_unattach() might get executedbetween cancel_work_sync() and unreserve_psock() in kcm_release(),requeuing kcm->tx_work right before kcm gets freed in kcm_done().Remove kcm->tx_stopped and replace it by the lesserror-prone disable_work_sync().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:LoongArch: BPF: Fix jump offset calculation in tailcallThe extra pass of bpf_int_jit_compile() skips JIT context initializationwhich essentially skips offset calculation leaving out_offset = -1, sothe jmp_offset in emit_bpf_tail_call is calculated by"#define jmp_offset (out_offset - (cur_offset))"is a negative number, which is wrong. The final generated assembly areas follow.54: bgeu $a2, $t1, -8 # 0x0000004c58: addi.d $a6, $s5, -15c: bltz $a6, -16 # 0x0000004c60: alsl.d $t2, $a2, $a1, 0x364: ld.d $t2, $t2, 26468: beq $t2, $zero, -28 # 0x0000004cBefore apply this patch, the follow test case will reveal soft lock issues.cd tools/testing/selftests/bpf/./test_progs --allow=tailcalls/tailcall_bpf2bpf_1dmesg:watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb3: fix for slab out of bounds on mount to ksmbdWith KASAN enabled, it is possible to get a slab out of boundsduring mount to ksmbd due to missing check in parse_server_interfaces()(see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: light: as73211: Ensure buffer holes are zeroedGiven that the buffer is copied to a kfifo that ultimately user spacecan read, ensure we zero it.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ftrace: Also allocate and copy hash for reading of filter filesCurrently the reader of set_ftrace_filter and set_ftrace_notrace just addsthe pointer to the global tracer hash to its iterator. Unlike the writerthat allocates a copy of the hash, the reader keeps the pointer to thefilter hashes. This is problematic because this pointer is static acrossfunction calls that release the locks that can update the global tracerhashes. This can cause UAF and similar bugs.Allocate and copy the hash for reading the filter files like it is donefor the writers. This not only fixes UAF bugs, but also makes the code abit simpler as it doesn't have to differentiate when to free theiterator's hash between writers and readers.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Forget ranges when refining tnum after JSETSyzbot reported a kernel warning due to a range invariant violation onthe following BPF program. 0: call bpf_get_netns_cookie 1: if r0 == 0 goto 2: if r0 & Oxffffffff goto The issue is on the path where we fall through both jumps.That path is unreachable at runtime: after insn 1, we know r0 != 0, butwith the sign extension on the jset, we would only fallthrough insn 2if r0 == 0. Unfortunately, is_branch_taken() isn't currently able tofigure this out, so the verifier walks all branches. The verifier thenrefines the register bounds using the second condition and we endup with inconsistent bounds on this unreachable path: 1: if r0 == 0 goto r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff) 2: if r0 & 0xffffffff goto r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0) r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0)Improving the range refinement for JSET to cover all cases is tricky. Wealso don't expect many users to rely on JSET given LLVM doesn't generatethose instructions. So instead of improving the range refinement forJSETs, Eduard suggested we forget the ranges whenever we're narrowingtnums after a JSET. This patch implements that approach.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/mremap: fix WARN with uffd that has remap events disabledRegistering userfaultd on a VMA that spans at least one PMD and thenmremap()'ing that VMA can trigger a WARN when recovering from a failedpage table move due to a page table allocation error.The code ends up doing the right thing (recurse, avoiding moving actualpage tables), but triggering that WARN is unpleasant:WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_normal_pmd mm/mremap.c:357 [inline]WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_pgt_entry mm/mremap.c:595 [inline]WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_page_tables+0x3832/0x44a0 mm/mremap.c:852Modules linked in:CPU: 2 UID: 0 PID: 6133 Comm: syz.0.19 Not tainted 6.17.0-rc1-syzkaller-00004-g53e760d89498 #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014RIP: 0010:move_normal_pmd mm/mremap.c:357 [inline]RIP: 0010:move_pgt_entry mm/mremap.c:595 [inline]RIP: 0010:move_page_tables+0x3832/0x44a0 mm/mremap.c:852Code: ...RSP: 0018:ffffc900037a76d8 EFLAGS: 00010293RAX: 0000000000000000 RBX: 0000000032930007 RCX: ffffffff820c6645RDX: ffff88802e56a440 RSI: ffffffff820c7201 RDI: 0000000000000007RBP: ffff888037728fc0 R08: 0000000000000007 R09: 0000000000000000R10: 0000000032930007 R11: 0000000000000000 R12: 0000000000000000R13: ffffc900037a79a8 R14: 0000000000000001 R15: dffffc0000000000FS: 000055556316a500(0000) GS:ffff8880d68bc000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000001b30863fff CR3: 0000000050171000 CR4: 0000000000352ef0Call Trace: copy_vma_and_data+0x468/0x790 mm/mremap.c:1215 move_vma+0x548/0x1780 mm/mremap.c:1282 mremap_to+0x1b7/0x450 mm/mremap.c:1406 do_mremap+0xfad/0x1f80 mm/mremap.c:1921 __do_sys_mremap+0x119/0x170 mm/mremap.c:1977 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f00d0b8ebe9Code: ...RSP: 002b:00007ffe5ea5ee98 EFLAGS: 00000246 ORIG_RAX: 0000000000000019RAX: ffffffffffffffda RBX: 00007f00d0db5fa0 RCX: 00007f00d0b8ebe9RDX: 0000000000400000 RSI: 0000000000c00000 RDI: 0000200000000000RBP: 00007ffe5ea5eef0 R08: 0000200000c00000 R09: 0000000000000000R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000002R13: 00007f00d0db5fa0 R14: 00007f00d0db5fa0 R15: 0000000000000005 The underlying issue is that we recurse during the original page tablemove, but not during the recovery move.Fix it by checking for both VMAs and performing the check before thepmd_none() sanity check.Add a new helper where we perform+document that check for the PMD and PUDlevel.Thanks to Harry for bisecting.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/debug_vm_pgtable: clear page table entries at destroy_args()The mm/debug_vm_pagetable test allocates manually page table entries forthe tests it runs, using also its manually allocated mm_struct. That initself is ok, but when it exits, at destroy_args() it fails to clear thoseentries with the *_clear functions.The problem is that leaves stale entries. If another process allocates anmm_struct with a pgd at the same address, it may end up running into thestale entry. This is happening in practice on a debug kernel withCONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extradebugging I added (it prints a warning trace if pgtables_bytes goesnegative, in addition to the warning at check_mm() function):[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000[ 2.539366] kmem_cache info[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e(...)[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0[ 2.552816] Modules linked in:[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)[ 2.552899] MSR: 800000000282b033 CR: 24002822 XER: 0000000a[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0[ 2.553199] Call Trace:[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec(...)[ 2.558892] ---[ end trace 0000000000000000 ]---[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144Here the modprobe process ended up with an allocated mm_struct from themm_struct slab that was used before by the debug_vm_pgtable test. That isnot a problem, since the mm_stru---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: x86/aegis - Add missing error checksThe skcipher_walk functions can allocate memory and can fail, sochecking for errors is necessary.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:efivarfs: Fix slab-out-of-bounds in efivarfs_d_compareObserved on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can becomenegative, leadings to oob. The issue can be triggered by parallellookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oobFix it by checking 'guid' before cmp.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:trace/fgraph: Fix the warning caused by missing unregister notifierThis warning was triggered during testing on v6.16:notifier callback ftrace_suspend_notifier_call already registeredWARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0...Call Trace: blocking_notifier_chain_register+0x34/0x60 register_ftrace_graph+0x330/0x410 ftrace_profile_write+0x1e9/0x340 vfs_write+0xf8/0x420 ? filp_flush+0x8a/0xa0 ? filp_close+0x1f/0x30 ? do_dup2+0xaf/0x160 ksys_write+0x65/0xe0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7fWhen writing to the function_profile_enabled interface, the notifier wasnot unregistered after start_graph_tracing failed, causing a warning thenext time function_profile_enabled was written.Fixed by adding unregister_pm_notifier in the exception path.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: fix invalid accesses to ceph_connection_v1_infoThere is a place where generic code in messenger.c is reading andanother place where it is writing to con->v1 union member withoutchecking that the union member is active (i.e. msgr1 is in use).On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,so such a read is almost guaranteed to return a bogus value instead of0 when msgr2 is in use. This ends up being fairly benign because theside effect is just the invalidation of the authorizer and successivefetching of new tickets.con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact thatit's being written to can cause more serious consequences, but luckilyit's not something that happens often.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vhost: Take a reference on the task in struct vhost_task.vhost_task_create() creates a task and keeps a reference to itstask_struct. That task may exit early via a signal and its task_structwill be released.A pending vhost_task_wake() will then attempt to wake the task andaccess a task_struct which is no longer there.Acquire a reference on the task_struct while creating the thread andrelease the reference while the struct vhost_task itself is removed.If the task exits early due to a signal, then the vhost_task_wake() willstill access a valid task_struct. The wake is safe and will be skippedin this case.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULLcheck, which could lead to a null pointer dereference. Move the pruassignment, ensuring we never dereference a NULL rproc pointer.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix race condition in kprobe initialization causing NULL pointer dereferenceThere is a critical race condition in kprobe initialization that can lead toNULL pointer dereference and kernel crash.[1135630.084782] Unable to handle kernel paging request at virtual address 0000710a04630000...[1135630.260314] pstate: 404003c9 (nZcv DAIF +PAN -UAO)[1135630.269239] pc : kprobe_perf_func+0x30/0x260[1135630.277643] lr : kprobe_dispatcher+0x44/0x60[1135630.286041] sp : ffffaeff4977fa40[1135630.293441] x29: ffffaeff4977fa40 x28: ffffaf015340e400[1135630.302837] x27: 0000000000000000 x26: 0000000000000000[1135630.312257] x25: ffffaf029ed108a8 x24: ffffaf015340e528[1135630.321705] x23: ffffaeff4977fc50 x22: ffffaeff4977fc50[1135630.331154] x21: 0000000000000000 x20: ffffaeff4977fc50[1135630.340586] x19: ffffaf015340e400 x18: 0000000000000000[1135630.349985] x17: 0000000000000000 x16: 0000000000000000[1135630.359285] x15: 0000000000000000 x14: 0000000000000000[1135630.368445] x13: 0000000000000000 x12: 0000000000000000[1135630.377473] x11: 0000000000000000 x10: 0000000000000000[1135630.386411] x9 : 0000000000000000 x8 : 0000000000000000[1135630.395252] x7 : 0000000000000000 x6 : 0000000000000000[1135630.403963] x5 : 0000000000000000 x4 : 0000000000000000[1135630.412545] x3 : 0000710a04630000 x2 : 0000000000000006[1135630.421021] x1 : ffffaeff4977fc50 x0 : 0000710a04630000[1135630.429410] Call trace:[1135630.434828] kprobe_perf_func+0x30/0x260[1135630.441661] kprobe_dispatcher+0x44/0x60[1135630.448396] aggr_pre_handler+0x70/0xc8[1135630.454959] kprobe_breakpoint_handler+0x140/0x1e0[1135630.462435] brk_handler+0xbc/0xd8[1135630.468437] do_debug_exception+0x84/0x138[1135630.475074] el1_dbg+0x18/0x8c[1135630.480582] security_file_permission+0x0/0xd0[1135630.487426] vfs_write+0x70/0x1c0[1135630.493059] ksys_write+0x5c/0xc8[1135630.498638] __arm64_sys_write+0x24/0x30[1135630.504821] el0_svc_common+0x78/0x130[1135630.510838] el0_svc_handler+0x38/0x78[1135630.516834] el0_svc+0x8/0x1b0kernel/trace/trace_kprobe.c: 13080xffff3df8995039ec : ldr x21, [x24,#120]include/linux/compiler.h: 2940xffff3df8995039f0 : ldr x1, [x21,x0]kernel/trace/trace_kprobe.c1308: head = this_cpu_ptr(call->perf_events);1309: if (hlist_empty(head))1310: return 0;crash> struct trace_event_call -ostruct trace_event_call { ... [120] struct hlist_head *perf_events; //(call->perf_event) ...}crash> struct trace_event_call ffffaf015340e528struct trace_event_call { ... perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0 ...}Race Condition Analysis:The race occurs between kprobe activation and perf_events initialization: CPU0 CPU1 ==== ==== perf_kprobe_init perf_trace_event_init tp_event->perf_events = list;(1) tp_event->class->reg (2)<- KPROBE ACTIVE Debug exception triggers ... kprobe_dispatcher kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE) head = this_cpu_ptr(call->perf_events)(3) (perf_events is still NULL)Problem:1. CPU0 executes (1) assigning tp_event->perf_events = list2. CPU0 executes (2) enabling kprobe functionality via class->reg()3. CPU1 triggers and reaches kprobe_dispatcher4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)5. CPU1 calls kprobe_perf_func() and crashes at (3) because call->perf_events is still NULLCPU1 sees that kprobe functionality is enabled but does not see thatperf_events has been assigned.Add pairing read an---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: dlink: handle copy_thresh allocation failureThe driver did not handle failure of `netdev_alloc_skb_ip_align()`.If the allocation failed, dereferencing `skb->protocol` could lead toa NULL pointer dereference.This patch tries to allocate `skb`. If the allocation fails, it fallsback to the normal path.Tested-on: D-Link DGE-550T Rev-A3
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:perf: arm_spe: Prevent overflow in PERF_IDX2OFF()Cast nr_pages to unsigned long to avoid overflow when handling largeAUX buffer sizes (>= 2 GiB).
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: hda: Fix missing pointer check in hda_component_manager_init functionThe __component_match_add function may assign the 'matchptr' pointerthe value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.The call stack leading to the error looks like this:hda_component_manager_init|-> component_match_add |-> component_match_add_release |-> __component_match_add ( ... ,**matchptr, ... ) |-> *matchptr = ERR_PTR(-ENOMEM); // assign|-> component_master_add_with_match( ... match) |-> component_match_realloc(match, match->num); // dereferenceAdd IS_ERR() check to prevent the crash.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: fix divide-by-zero in comedi_buf_munge()The comedi_buf_munge() function performs a modulo operation`async->munge_chan %= async->cmd.chanlist_len` without firstchecking if chanlist_len is zero. If a user program submits a command withchanlist_len set to zero, this causes a divide-by-zero error when the deviceprocesses data in the interrupt handler path.Add a check for zero chanlist_len at the beginning of thefunction, similar to the existing checks for !map andCMDF_RAWDATA flag. When chanlist_len is zero, updatemunge_count and return early, indicating the data washandled without munging.This prevents potential kernel panics from malformed user commands.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Enforce expected_attach_type for tailcall compatibilityYinhao et al. recently reported: Our fuzzer tool discovered an uninitialized pointer issue in the bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem. This leads to a NULL pointer dereference when a BPF program attempts to deference the txq member of struct xdp_buff object.The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as theentry point for bpf_prog_test_run_xdp() and its expected_attach_type canneither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slotof a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAPto pass xdp_is_valid_access() validation. The program returns struct xdp_md'segress_ifindex, and the latter is only allowed to be accessed under mentionedexpected_attach_type. progB is then inserted into the tailcall which progAcalls.The underlying issue goes beyond XDP though. Another example are programsof type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as wellas sock_addr_func_proto() have different logic depending on the programs'expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAMEshould not be allowed doing a tailcall into a program which calls bpf_bind()out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.In short, specifying expected_attach_type allows to open up additionalfunctionality or restrictions beyond what the basic bpf_prog_type enables.The use of tailcalls must not violate these constraints. Fix it by enforcingexpected_attach_type in __bpf_prog_map_compatible().Note that we only enforce this for tailcall maps, but not for BPF devmaps orcpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() andcpu_map_bpf_prog_run*() which set up a new environment / context and thereforethese situations are not prone to this issue.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: detect invalid INLINE_DATA + EXTENTS flag combinationsyzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verityfile on a corrupted ext4 filesystem mounted without a journal.The issue is that the filesystem has an inode with both the INLINE_DATAand EXTENTS flags set: EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15: comm syz.0.17: corrupted extent tree: lblk 0 < prev 66Investigation revealed that the inode has both flags set: DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1This is an invalid combination since an inode should have either:- INLINE_DATA: data stored directly in the inode- EXTENTS: data stored in extent-mapped blocksHaving both flags causes ext4_has_inline_data() to return true, skippingextent tree validation in __ext4_iget(). The unvalidated out-of-orderextents then trigger a BUG_ON in ext4_es_cache_extent() due to integerunderflow when calculating hole sizes.Fix this by detecting this invalid flag combination early in ext4_iget()and rejecting the corrupted inode.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Revert "ipmi: fix msg stack when IPMI is disconnected"This reverts commit c608966f3f9c2dca596967501d00753282b395fc.This patch has a subtle bug that can cause the IPMI driver to go into aninfinite loop if the BMC misbehaves in a certain way. Apparentlycertain BMCs do misbehave this way because several reports have come inrecently about this.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() pathsThe usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit()path is very broken.sys_prlimit64() does get_task_struct(tsk) but this only protects task_structitself. If tsk != current and tsk is not a leader, this process can exit/execand task_lock(tsk->group_leader) may use the already freed task_struct.Another problem is that sys_prlimit64() can race with mt-exec which changes->group_leader. In this case do_prlimit() may take the wrong lock, or (worse)->group_leader may change between task_lock() and task_unlock().Change sys_prlimit64() to take tasklist_lock when necessary. This is notnice, but I don't see a better fix for -stable.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi: Rework user message limit handlingThe limit on the number of user messages had a number of issues,improper counting in some cases and a use after free.Restructure how this is all done to handle more in the receive messageallocation routine, so all refcouting and user message limit countsare done in that routine. It's a lot cleaner and safer.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: clear extent cache after moving/defragmenting extentsThe extent map cache can become stale when extents are moved ordefragmented, causing subsequent operations to see outdated extent flags. This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().The problem occurs when:1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED2. ioctl(FITRIM) triggers ocfs2_move_extents()3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent() which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)5. The extent map cache is not invalidated after the move6. Later write() operations read stale cached flags (0x2) but disk has updated flags (0x0), causing a mismatch7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggersFix by clearing the extent map cache after each extent move/defragoperation in __ocfs2_move_extents_range(). This ensures subsequentoperations read fresh extent data from disk.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Fix IPsec cleanup over MPV deviceWhen we do mlx5e_detach_netdev() we eventually disable blocking eventsnotifier, among those events are IPsec MPV events from IB to core.So before disabling those blocking events, make sure to also unregisterthe devcom device and mark all this device operations as complete,in order to prevent the other device from using invalid netdevduring future devcom events which could cause the trace below.BUG: kernel NULL pointer dereference, address: 0000000000000010PGD 146427067 P4D 146427067 PUD 146488067 PMD 0Oops: Oops: 0000 [#1] SMPCPU: 1 UID: 0 PID: 7735 Comm: devlink Tainted: GW 6.12.0-rc6_for_upstream_min_debug_2024_11_08_00_46 #1Tainted: [W]=WARNHardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014RIP: 0010:mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]Code: 00 01 48 83 05 23 32 1e 00 01 41 b8 ed ff ff ff e9 60 ff ff ff 48 83 05 00 32 1e 00 01 eb e3 66 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 47 10 48 83 05 5f 32 1e 00 01 48 8b 50 40 48 85 d2 74 05 40RSP: 0018:ffff88811a5c35f8 EFLAGS: 00010206RAX: ffff888106e8ab80 RBX: ffff888107d7e200 RCX: ffff88810d6f0a00RDX: ffff88810d6f0a00 RSI: 0000000000000001 RDI: 0000000000000000RBP: ffff88811a17e620 R08: 0000000000000040 R09: 0000000000000000R10: ffff88811a5c3618 R11: 0000000de85d51bd R12: ffff88811a17e600R13: ffff88810d6f0a00 R14: 0000000000000000 R15: ffff8881034bda80FS: 00007f27bdf89180(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000000000000010 CR3: 000000010f159005 CR4: 0000000000372eb0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] mlx5e_devcom_event_mpv+0x42/0x60 [mlx5_core] mlx5_devcom_send_event+0x8c/0x170 [mlx5_core] blocking_event+0x17b/0x230 [mlx5_core] notifier_call_chain+0x35/0xa0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_mp_event_replay+0x12/0x20 [mlx5_core] mlx5_ib_bind_slave_port+0x228/0x2c0 [mlx5_ib] mlx5_ib_stage_init_init+0x664/0x9d0 [mlx5_ib] ? idr_alloc_cyclic+0x50/0xb0 ? __kmalloc_cache_noprof+0x167/0x340 ? __kmalloc_noprof+0x1a7/0x430 __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe9/0x310 [mlx5_ib] ? kernfs_add_one+0x107/0x150 ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] auxiliary_bus_probe+0x3e/0x90 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x62d/0x830 __auxiliary_device_add+0x3b/0xa0 ? auxiliary_device_init+0x41/0x90 add_adev+0xd1/0x150 [mlx5_core] mlx5_rescan_drivers_locked+0x21c/0x300 [mlx5_core] esw_mode_change+0x6c/0xc0 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x21e/0x640 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x170/0x170 ? devlink_nl_eswitch_get_doit+0x290/0x290 ? devlink_nl_pre_doit_port_optional+0x50/0x50 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __sys_recvmsg+0x4e/0x90 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53RIP: 0033:0x7f27bc91b13aCode: bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 8b 05 fa 96 2c 00 45 89 c9 4c 63 d1 48 63 ff 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff ---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: avoid NULL dereference when chunk data buffer is missingchunk->skb pointer is dereferenced in the if-block where it's supposedto be NULL only.chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_listinstead and do it just before replacing chunk->skb. We're sure thatotherwise chunk->skb is non-NULL because of outer if() condition.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock: Ignore signal/timeout on connect() if already establishedDuring connect(), acting on a signal/timeout by disconnecting an alreadyestablished socket leads to several issues:1. connect() invoking vsock_transport_cancel_pkt() -> virtio_transport_purge_skbs() may race with sendmsg() invoking virtio_transport_get_credit(). This results in a permanently elevated `vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.2. connect() resetting a connected socket's state may race with socket being placed in a sockmap. A disconnected socket remaining in a sockmap breaks sockmap's assumptions. And gives rise to WARNs.3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a transport change/drop after TCP_ESTABLISHED. Which poses a problem for any simultaneous sendmsg() or connect() and may result in a use-after-free/null-ptr-deref.Do not disconnect socket on signal/timeout. Keep the logic for unconnectedsockets: they don't linger, can't be placed in a sockmap, are rejected bysendmsg().[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Clean up only new IRQ glue on request_irq() failureThe mlx5_irq_alloc() function can inadvertently free the entire rmapand end up in a crash[1] when the other threads tries to access this,when request_irq() fails due to exhausted IRQ vectors. This commitmodifies the cleanup to remove only the specific IRQ mapping that wasjust added.This prevents removal of other valid mappings and ensures precisecleanup of the failed IRQ allocation's associated glue object.Note: This error is observed when both fwctl and rds configs are enabled.[1]mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed torequest irq. err = -28infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 whiletrying to test write-combining supportmlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed torequest irq. err = -28infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 whiletrying to test write-combining supportmlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed torequest irq. err = -28mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed torequest irq. err = -28general protection fault, probably for non-canonical address0xe277a58fde16f291: 0000 [#1] SMP NOPTIRIP: 0010:free_irq_cpu_rmap+0x23/0x7dCall Trace: ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] ? __die_body.cold+0x8/0xa ? die_addr+0x39/0x53 ? exc_general_protection+0x1c4/0x3e9 ? dev_vprintk_emit+0x5f/0x90 ? asm_exc_general_protection+0x22/0x27 ? free_irq_cpu_rmap+0x23/0x7d mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] irq_pool_request_vector+0x7d/0x90 [mlx5_core] mlx5_irq_request+0x2e/0xe0 [mlx5_core] mlx5_irq_request_vector+0xad/0xf7 [mlx5_core] comp_irq_request_pci+0x64/0xf0 [mlx5_core] create_comp_eq+0x71/0x385 [mlx5_core] ? mlx5e_open_xdpsq+0x11c/0x230 [mlx5_core] mlx5_comp_eqn_get+0x72/0x90 [mlx5_core] ? xas_load+0x8/0x91 mlx5_comp_irqn_get+0x40/0x90 [mlx5_core] mlx5e_open_channel+0x7d/0x3c7 [mlx5_core] mlx5e_open_channels+0xad/0x250 [mlx5_core] mlx5e_open_locked+0x3e/0x110 [mlx5_core] mlx5e_open+0x23/0x70 [mlx5_core] __dev_open+0xf1/0x1a5 __dev_change_flags+0x1e1/0x249 dev_change_flags+0x21/0x5c do_setlink+0x28b/0xcc4 ? __nla_parse+0x22/0x3d ? inet6_validate_link_af+0x6b/0x108 ? cpumask_next+0x1f/0x35 ? __snmp6_fill_stats64.constprop.0+0x66/0x107 ? __nla_validate_parse+0x48/0x1e6 __rtnl_newlink+0x5ff/0xa57 ? kmem_cache_alloc_trace+0x164/0x2ce rtnl_newlink+0x44/0x6e rtnetlink_rcv_msg+0x2bb/0x362 ? __netlink_sendskb+0x4c/0x6c ? netlink_unicast+0x28f/0x2ce ? rtnl_calcit.isra.0+0x150/0x146 netlink_rcv_skb+0x5f/0x112 netlink_unicast+0x213/0x2ce netlink_sendmsg+0x24f/0x4d9 __sock_sendmsg+0x65/0x6a ____sys_sendmsg+0x28f/0x2c9 ? import_iovec+0x17/0x2b ___sys_sendmsg+0x97/0xe0 __sys_sendmsg+0x81/0xd8 do_syscall_64+0x35/0x87 entry_SYSCALL_64_after_hwframe+0x6e/0x0RIP: 0033:0x7fc328603727Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b edff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48RSP: 002b:00007ffe8eb3f1a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002eRAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc328603727RDX: 0000000000000000 RSI: 00007ffe8eb3f1f0 RDI: 000000000000000dRBP: 00007ffe8eb3f1f0 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000R13: 00000000000---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:devlink: rate: Unset parent pointer in devl_rate_nodes_destroyThe function devl_rate_nodes_destroy is documented to "Unset parent forall rate objects". However, it was only calling the driver-specific`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementingthe parent's refcount, without actually setting the`devlink_rate->parent` pointer to NULL.This leaves a dangling pointer in the `devlink_rate` struct, which causerefcount error in netdevsim[1] and mlx5[2]. In addition, this isinconsistent with the behavior of `devlink_nl_rate_parent_node_set`,where the parent pointer is correctly cleared.This patch fixes the issue by explicitly setting `devlink_rate->parent`to NULL after notifying the driver, thus fulfilling the function'sdocumented behavior for all rate objects.[1]repro steps:echo 1 > /sys/bus/netdevsim/new_devicedevlink dev eswitch set netdevsim/netdevsim1 mode switchdevecho 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfsdevlink port function rate add netdevsim/netdevsim1/test_nodedevlink port function rate set netdevsim/netdevsim1/128 parent test_nodeecho 1 > /sys/bus/netdevsim/del_devicedmesg:refcount_t: decrement hit 0; leaking memory.WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONEHardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014RIP: 0010:refcount_warn_saturate+0x42/0xe0Call Trace: devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53[2]devlink dev eswitch set pci/0000:08:00.0 mode switchdevdevlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000devlink port function rate add pci/0000:08:00.0/group1devlink port function rate set pci/0000:08:00.0/32768 parent group1modprobe -r mlx5_ib mlx5_fwctl mlx5_coredmesg:refcount_t: decrement hit 0; leaking memory.WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONEHardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014RIP: 0010:refcount_warn_saturate+0x42/0xe0Call Trace: devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterateover 'cqe->len_list[]' using only a zero-length terminator asthe stopping condition. If the terminator was missing ormalformed, the loop could run past the end of the fixed-size array.Add an explicit bound check using ARRAY_SIZE() in both loops to preventa potential out-of-bounds access.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/ctcm: Fix double-kfreeThe function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionallyfrom function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'frees it again.Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.Bug detected by the clang static analyzer.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: openvswitch: remove never-working support for setting nsh fieldsThe validation of the set(nsh(...)) action is completely wrong.It runs through the nsh_key_put_from_nlattr() function that is thesame function that validates NSH keys for the flow match and thepush_nsh() action. However, the set(nsh(...)) has a very differentmemory layout. Nested attributes in there are doubled in size incase of the masked set(). That makes proper validation impossible.There is also confusion in the code between the 'masked' flag, thatsays that the nested attributes are doubled in size containing boththe value and the mask, and the 'is_mask' that says that the valuewe're parsing is the mask. This is causing kernel crash on trying towrite into mask part of the match with SW_FLOW_KEY_PUT() duringvalidation, while validate_nsh() doesn't allocate any memory for it: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary) RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch] Call Trace: validate_nsh+0x60/0x90 [openvswitch] validate_set.constprop.0+0x270/0x3c0 [openvswitch] __ovs_nla_copy_actions+0x477/0x860 [openvswitch] ovs_nla_copy_actions+0x8d/0x100 [openvswitch] ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch] genl_family_rcv_msg_doit+0xdb/0x130 genl_family_rcv_msg+0x14b/0x220 genl_rcv_msg+0x47/0xa0 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x280/0x3b0 netlink_sendmsg+0x1f7/0x430 ____sys_sendmsg+0x36b/0x3a0 ___sys_sendmsg+0x87/0xd0 __sys_sendmsg+0x6d/0xd0 do_syscall_64+0x7b/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe third issue with this process is that while trying to convertthe non-masked set into masked one, validate_set() copies and doublesthe size of the OVS_KEY_ATTR_NSH as if it didn't have any nestedattributes. It should be copying each nested attribute and doublingthem in size independently. And the process must be properly reversedduring the conversion back from masked to a non-masked variant duringthe flow dump.In the end, the only two outcomes of trying to use this action areeither validation failure or a kernel crash. And if somehow someonemanages to install a flow with such an action, it will most definitelynot do what it is supposed to, since all the keys and the masks aremixed up.Fixing all the issues is a complex task as it requires re-writingmost of the validation code.Given that and the fact that this functionality never worked sinceintroduction, let's just remove it altogether. It's better tore-introduce it later with a proper implementation instead of tryingto fix it in stable releases.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: sg: Do not sleep in atomic contextsg_finish_rem_req() calls blk_rq_unmap_user(). The latter function maysleep. Hence, call sg_finish_rem_req() with interrupts enabled insteadof disabled.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()nvme_fc_delete_assocation() waits for pending I/O to complete beforereturning, and an error can cause ->ioerr_work to be queued aftercancel_work_sync() had been called. Move the call to cancel_work_sync() tobe after nvme_fc_delete_association() to ensure ->ioerr_work is not runningwhen the nvme_fc_ctrl object is freed. Otherwise the following can occur:[ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL[ 1135.917705] ------------[ cut here ]------------[ 1135.922336] kernel BUG at lib/list_debug.c:52![ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI[ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary)[ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025[ 1135.950969] Workqueue: 0x0 (nvme-wq)[ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f[ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b[ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046[ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000[ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0[ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08[ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100[ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0[ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000[ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0[ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400[ 1136.055910] PKRU: 55555554[ 1136.058623] Call Trace:[ 1136.061074] [ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0[ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0[ 1136.071898] ? move_linked_works+0x4a/0xa0[ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.081744] ? __die_body.cold+0x8/0x12[ 1136.085584] ? die+0x2e/0x50[ 1136.088469] ? do_trap+0xca/0x110[ 1136.091789] ? do_error_trap+0x65/0x80[ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.101289] ? exc_invalid_op+0x50/0x70[ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20[ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.120806] move_linked_works+0x4a/0xa0[ 1136.124733] worker_thread+0x216/0x3a0[ 1136.128485] ? __pfx_worker_thread+0x10/0x10[ 1136.132758] kthread+0xfa/0x240[ 1136.135904] ? __pfx_kthread+0x10/0x10[ 1136.139657] ret_from_fork+0x31/0x50[ 1136.143236] ? __pfx_kthread+0x10/0x10[ 1136.146988] ret_from_fork_asm+0x1a/0x30[ 1136.150915]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:be2net: pass wrb_params in case of OS2BMCbe_insert_vlan_in_pkt() is called with the wrb_params argument being NULLat be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULLpointer when processing a workaround for specific packet, as commitbc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6packet") states.The correct way would be to pass the wrb_params from be_xmit().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: guest_memfd: Remove bindings on memslot deletion when gmem is dyingWhen unbinding a memslot from a guest_memfd instance, remove the bindingseven if the guest_memfd file is dying, i.e. even if its file refcount hasgone to zero. If the memslot is freed before the file is fully released,nullifying the memslot side of the binding in kvm_gmem_release() willwrite to freed memory, as detected by syzbot+KASAN: ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353 Write of size 8 at addr ffff88807befa508 by task syz.0.17/6022 CPU: 0 UID: 0 PID: 6022 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025 Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353 __fput+0x44c/0xa70 fs/file_table.c:468 task_work_run+0x1d4/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xe9/0x130 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x2bd/0xfa0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbeeff8efc9 Allocated by task 6023: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:397 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:414 kasan_kmalloc include/linux/kasan.h:262 [inline] __kmalloc_cache_noprof+0x3e2/0x700 mm/slub.c:5758 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] kvm_set_memory_region+0x747/0xb90 virt/kvm/kvm_main.c:2104 kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154 kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6023: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5c/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2533 [inline] slab_free mm/slub.c:6622 [inline] kfree+0x19a/0x6d0 mm/slub.c:6829 kvm_set_memory_region+0x9c4/0xb90 virt/kvm/kvm_main.c:2130 kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154 kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fDeliberately don't acquire filemap invalid lock when the file is dying asthe lifecycle of f_mapping is outside the purview of KVM. Dereferencingthe mapping is *probably* fine, but there's no need to invalidate anythingas memslot deletion is responsible for zapping SPTEs, and the only codethat can access the dying file is kvm_gmem_release(), whose core code ismutual---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: act_ife: initialize struct tc_ife to fix KMSAN kernel-infoleakFix a KMSAN kernel-infoleak detected by the syzbot .[net?] KMSAN: kernel-infoleak in __skb_datagram_iterIn tcf_ife_dump(), the variable 'opt' was partially initialized using adesignatied initializer. While the padding bytes are reamineduninitialized. nla_put() copies the entire structure into anetlink message, these uninitialized bytes leaked to userspace.Initialize the structure with memset before assigning its fieldsto ensure all members and padding are cleared prior to beign copied.This change silences the KMSAN report and prevents potential informationleaks from the kernel memory.This fix has been tested and validated by syzbot. This patch closes thebug reported at the following syzkaller link and ensures no infoleak.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:exfat: fix improper check of dentry.stream.valid_sizeWe found an infinite loop bug in the exFAT file system that can lead to aDenial-of-Service (DoS) condition. When a dentry in an exFAT filesystem ismalformed, the following system calls - SYS_openat, SYS_ftruncate, andSYS_pwrite64 - can cause the kernel to hang.Root cause analysis shows that the size validation code in exfat_find()does not check whether dentry.stream.valid_size is negative. As a result,the system calls mentioned above can succeed and eventually trigger the DoSissue.This patch adds a check for negative dentry.stream.valid_size to preventthis vulnerability.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: hide VRAM sysfs attributes on GPUs without VRAMOtherwise accessing them can cause a crash.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:exfat: validate cluster allocation bits of the allocation bitmapsyzbot created an exfat image with cluster bits not set for the allocationbitmap. exfat-fs reads and uses the allocation bitmap without checkingthis. The problem is that if the start cluster of the allocation bitmapis 6, cluster 6 can be allocated when creating a directory with mkdir.exfat zeros out this cluster in exfat_mkdir, which can delete existingentries. This can reallocate the allocated entries. In addition,the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.This patch adds exfat_test_bitmap_range to validate that clusters used forthe allocation bitmap are correctly marked as in-use.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Sync pending IRQ work before freeing ring bufferFix a race where irq_work can be queued in bpf_ringbuf_commit()but the ring buffer is freed before the work executes.In the syzbot reproducer, a BPF program attached to sched_switchtriggers bpf_ringbuf_commit(), queuing an irq_work. If the ring bufferis freed before this work executes, the irq_work thread may accessesfreed memory.Calling `irq_work_sync(&rb->work)` ensures that all pending irq_workcomplete before freeing the buffer.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix potential UAF in smb2_close_cached_fid()find_or_create_cached_dir() could grab a new reference after kref_put()had seen the refcount drop to zero but before cfid_list_lock is acquiredin smb2_close_cached_fid(), leading to use-after-free.Switch to kref_put_lock() so cfid_release() is called withcfid_list_lock held, closing that gap.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: Prevent TOCTOU out-of-bounds writeFor the following path not holding the sock lock, sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump()make sure not to exceed bounds in case the address list has grownbetween buffer allocation (time-of-check) and write (time-of-use).
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: stmmac: Correctly handle Rx checksum offload errorsThe stmmac_rx function would previously set skb->ip_summed toCHECKSUM_UNNECESSARY if hardware checksum offload (CoE) was enabledand the packet was of a known IP ethertype.However, this logic failed to check if the hardware had actuallyreported a checksum error. The hardware status, indicating a header orpayload checksum failure, was being ignored at this stage. This couldcause corrupt packets to be passed up the network stack as valid.This patch corrects the logic by checking the `csum_none` status flag,which is set when the hardware reports a checksum error. If this flagis set, skb->ip_summed is now correctly set to CHECKSUM_NONE,ensuring the kernel's network stack will perform its own validation andproperly handle the corrupt packet.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:futex: Don't leak robust_list pointer on exec racesys_get_robust_list() and compat_get_robust_list() use ptrace_may_access()to check if the calling task is allowed to access another task'srobust_list pointer. This check is racy against a concurrent exec() in thetarget process.During exec(), a task may transition from a non-privileged binary to aprivileged one (e.g., setuid binary) and its credentials/memory mappingsmay change. If get_robust_list() performs ptrace_may_access() beforethis transition, it may erroneously allow access to sensitive informationafter the target becomes privileged.A racy access allows an attacker to exploit a window during whichptrace_may_access() passes before a target process transitions to aprivileged state via exec().For example, consider a non-privileged task T that is about to execute asetuid-root binary. An attacker task A calls get_robust_list(T) while Tis still unprivileged. Since ptrace_may_access() checks permissionsbased on current credentials, it succeeds. However, if T begins execimmediately afterwards, it becomes privileged and may change its memorymappings. Because get_robust_list() proceeds to access T->robust_listwithout synchronizing with exec() it may read user-space pointers from anow-privileged process.This violates the intended post-exec access restrictions and couldexpose sensitive memory addresses or be used as a primitive in a largerexploit chain. Consequently, the race can lead to unauthorizeddisclosure of information across privilege boundaries and poses apotential security risk.Take a read lock on signal->exec_update_lock prior to invokingptrace_may_access() and accessing the robust_list/compat_robust_list.This ensures that the target task's exec state remains stable during thecheck, allowing for consistent and synchronized validation ofcredentials.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()which causes the code to proceed with NULL clock pointers. The currentlogic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for bothvalid pointers and NULL, leading to potential NULL pointer dereferencein clk_get_rate().Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:"The error code within @ptr if it is an error pointer; 0 otherwise."This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULLpointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to becalled when of_clk_get() returns NULL.Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for validpointers, preventing potential NULL pointer dereference in clk_get_rate().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: enetc: fix the deadlock of enetc_mdio_lockAfter applying the workaround for err050089, the LS1028A platformexperiences RCU stalls on RT kernel. This issue is caused by therecursive acquisition of the read lock enetc_mdio_lock. Here list someof the call stacks identified under the enetc_poll path that may lead toa deadlock:enetc_poll -> enetc_lock_mdio -> enetc_clean_rx_ring OR napi_complete_done -> napi_gro_receive -> enetc_start_xmit -> enetc_lock_mdio -> enetc_map_tx_buffs -> enetc_unlock_mdio -> enetc_unlock_mdioAfter enetc_poll acquires the read lock, a higher-priority writer attemptsto acquire the lock, causing preemption. The writer detects that aread lock is already held and is scheduled out. However, readers underenetc_poll cannot acquire the read lock again because a writer is alreadywaiting, leading to a thread hang.Currently, the deadlock is avoided by adjusting enetc_lock_mdio to preventrecursive lock acquisition.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQXDP programs can change the layout of an xdp_buff throughbpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the drivercannot assume the size of the linear data area nor fragments. Fix thebug in mlx5 by generating skb according to xdp_buff after XDP programsrun.Currently, when handling multi-buf XDP, the mlx5 driver assumes thelayout of an xdp_buff to be unchanged. That is, the linear data areacontinues to be empty and fragments remain the same. This may causethe driver to generate erroneous skb or triggering a kernelwarning. When an XDP program added linear data throughbpf_xdp_adjust_head(), the linear data will be ignored asmlx5e_build_linear_skb() builds an skb without linear data and thenpull data from fragments to fill the linear data area. When an XDPprogram has shrunk the non-linear data through bpf_xdp_adjust_tail(),the delta passed to __pskb_pull_tail() may exceed the actual nonlineardata size and trigger the BUG_ON in it.To fix the issue, first record the original number of fragments. If thenumber of fragments changes after the XDP program runs, rewind the endfragment pointer by the difference and recalculate the truesize. Then,build the skb with the linear data area matching the xdp_buff. Finally,only pull data in if there is non-linear data and fill the linear partup to 256 bytes.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sysfs: check visibility before changing group attribute ownershipSince commit 0c17270f9b92 ("net: sysfs: Implement is_visible forphys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() canhit WARN_ON() when trying to change owner of a file that isn't visible.See the trace below: WARNING: CPU: 6 PID: 2938 at net/core/dev.c:12410 __dev_change_net_namespace+0xb89/0xc30 CPU: 6 UID: 0 PID: 2938 Comm: incusd Not tainted 6.17.1-1-mainline #1 PREEMPT(full) 4b783b4a638669fb644857f484487d17cb45ed1f Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.07 02/19/2025 RIP: 0010:__dev_change_net_namespace+0xb89/0xc30 [...] Call Trace: ? if6_seq_show+0x30/0x50 do_setlink.isra.0+0xc7/0x1270 ? __nla_validate_parse+0x5c/0xcc0 ? security_capable+0x94/0x1a0 rtnl_newlink+0x858/0xc20 ? update_curr+0x8e/0x1c0 ? update_entity_lag+0x71/0x80 ? sched_balance_newidle+0x358/0x450 ? psi_task_switch+0x113/0x2a0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x346/0x3e0 ? sched_clock+0x10/0x30 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? __sys_bind+0xe3/0x110 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? sock_alloc_file+0x63/0xc0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? alloc_fd+0x12e/0x190 ? put_unused_fd+0x2a/0x70 ? do_sys_openat2+0xa2/0xe0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Fix this by checking is_visible() before trying to touch the attribute.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/sysfb: Do not dereference NULL pointer in plane resetThe plane state in __drm_gem_reset_shadow_plane() can be NULL. Do notderef that pointer, but forward NULL to the other plane-reset helpers.Clears plane->state to NULL.v2:- fix typo in commit description (Javier)
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A transient execution vulnerability within AMD CPUs may allow a local user-privileged attacker to leak data via the floating point divisor unit, potentially resulting in loss of confidentiality.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions up to and including 0.9-rc2, the simple protocol server ignores the documented client limit and accepts unlimited connections, allowing for easy local DoS. Although `CLIENTS_MAX` is defined, `server_work()` unconditionally `accept()`s and `client_new()` always appends the new client and increments `n_clients`. There is no check against the limit. When client cannot be accepted as a result of maximal socket number of avahi-daemon, it logs unconditionally error per each connection. Unprivileged local users can exhaust daemon memory and file descriptors, causing a denial of service system-wide for mDNS/DNS-SD. Exhausting local file descriptors causes increased system load caused by logging errors of each of request. Overloading prevents glibc calls using nss-mdns plugins to resolve `*.local.` names and link-local addresses. As of time of publication, no known patched versions are available, but a candidate fix is available in pull request 808, and some workarounds are available. Simple clients are offered for nss-mdns package functionality. It is not possible to disable the unix socket `/run/avahi-daemon/socket`, but resolution requests received via DBus are not affected directly. Tools avahi-resolve, avahi-resolve-address and avahi-resolve-host-name are not affected, they use DBus interface. It is possible to change permissions of unix socket after avahi-daemon is started. But avahi-daemon does not provide any configuration for it. Additional access restrictions like SELinux can also prevent unwanted tools to access the socket and keep resolution working for trusted users.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.18.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/fpu: Ensure XFD state on signal deliverySean reported [1] the following splat when running KVM tests: WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70 Call Trace: fpu__clear_user_states+0x9c/0x100 arch_do_signal_or_restart+0x142/0x210 exit_to_user_mode_loop+0x55/0x100 do_syscall_64+0x205/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53Chao further identified [2] a reproducible scenario involving signaldelivery: a non-AMX task is preempted by an AMX-enabled task whichmodifies the XFD MSR.When the non-AMX task resumes and reloads XSTATE with init values,a warning is triggered due to a mismatch between fpstate::xfd and theCPU's current XFD state. fpu__clear_user_states() does not currentlyre-synchronize the XFD state after such preemption.Invoke xfd_update_state() which detects and corrects the mismatch ifthere is a dynamic feature.This also benefits the sigreturn path, as fpu__restore_sig() may callfpu__clear_user_states() when the sigframe is inaccessible.[ dhansen: minor changelog munging ]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ftrace: Fix softlockup in ftrace_module_enableA soft lockup was observed when loading amdgpu module.If a module has a lot of tracable functions, multiple callsto kallsyms_lookup can spend too much time in RCU criticalsection and with disabled preemption, causing kernel panic.This is the same issue that was fixed incommit d0b24b4e91fc ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARYkernels") and commit 42ea22e754ba ("ftrace: Add cond_resched() toftrace_graph_set_hash()").Fix it the same way by adding cond_resched() in ftrace_module_enable.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:amd/amdkfd: enhance kfd process check in switch partitioncurrent switch partition only check if kfd_processes_table is empty.kfd_prcesses_table entry is deleted in kfd_process_notifier_release, butkfd_process tear down is in kfd_process_wq_release.consider two processes:Process A (workqueue) -> kfd_process_wq_release -> Access kfd_node memberProcess B switch partition -> amdgpu_xcp_pre_partition_switch -> amdgpu_amdkfd_device_fini_sw-> kfd_node tear down.Process A and B may trigger a race as shown in dmesg log.This patch is to resolve the race by adding an atomic kfd_process counterkfd_processes_count, it increment as create kfd process, decrement asfinish kfd_process_wq_release.v2: Put kfd_processes_count per kfd_dev, move decrement to kfd_process_destroy_pddsand bug fix. (Philip Yang)[3966658.307702] divide error: 0000 [#1] SMP NOPTI[3966658.350818] i10nm_edac[3966658.356318] CPU: 124 PID: 38435 Comm: kworker/124:0 Kdump: loaded Tainted[3966658.356890] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu][3966658.362839] nfit[3966658.366457] RIP: 0010:kfd_get_num_sdma_engines+0x17/0x40 [amdgpu][3966658.366460] Code: 00 00 e9 ac 81 02 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 48 8b 4f 08 48 8b b7 00 01 00 00 8b 81 58 26 03 00 99 be b8 01 00 00 80 b9 70 2e 00 00 00 74 0b 83 f8 02 ba 02 00 00[3966658.380967] x86_pkg_temp_thermal[3966658.391529] RSP: 0018:ffffc900a0edfdd8 EFLAGS: 00010246[3966658.391531] RAX: 0000000000000008 RBX: ffff8974e593b800 RCX: ffff888645900000[3966658.391531] RDX: 0000000000000000 RSI: ffff888129154400 RDI: ffff888129151c00[3966658.391532] RBP: ffff8883ad79d400 R08: 0000000000000000 R09: ffff8890d2750af4[3966658.391532] R10: 0000000000000018 R11: 0000000000000018 R12: 0000000000000000[3966658.391533] R13: ffff8883ad79d400 R14: ffffe87ff662ba00 R15: ffff8974e593b800[3966658.391533] FS: 0000000000000000(0000) GS:ffff88fe7f600000(0000) knlGS:0000000000000000[3966658.391534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[3966658.391534] CR2: 0000000000d71000 CR3: 000000dd0e970004 CR4: 0000000002770ee0[3966658.391535] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[3966658.391535] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400[3966658.391536] PKRU: 55555554[3966658.391536] Call Trace:[3966658.391674] deallocate_sdma_queue+0x38/0xa0 [amdgpu][3966658.391762] process_termination_cpsch+0x1ed/0x480 [amdgpu][3966658.399754] intel_powerclamp[3966658.402831] kfd_process_dequeue_from_all_devices+0x5b/0xc0 [amdgpu][3966658.402908] kfd_process_wq_release+0x1a/0x1a0 [amdgpu][3966658.410516] coretemp[3966658.434016] process_one_work+0x1ad/0x380[3966658.434021] worker_thread+0x49/0x310[3966658.438963] kvm_intel[3966658.446041] ? process_one_work+0x380/0x380[3966658.446045] kthread+0x118/0x140[3966658.446047] ? __kthread_bind_mask+0x60/0x60[3966658.446050] ret_from_fork+0x1f/0x30[3966658.446053] Modules linked in: kpatch_20765354(OEK)[3966658.455310] kvm[3966658.464534] mptcp_diag xsk_diag raw_diag unix_diag af_packet_diag netlink_diag udp_diag act_pedit act_mirred act_vlan cls_flower kpatch_21951273(OEK) kpatch_18424469(OEK) kpatch_19749756(OEK)[3966658.473462] idxd_mdev[3966658.482306] kpatch_17971294(OEK) sch_ingress xt_conntrack amdgpu(OE) amdxcp(OE) amddrm_buddy(OE) amd_sched(OE) amdttm(OE) amdkcl(OE) intel_ifs iptable_mangle tcm_loop target_core_pscsi tcp_diag target_core_file inet_diag target_core_iblock target_core_user target_core_mod coldpgs kpatch_18383292(OEK) ip6table_nat ip6table_filter ip6_tables ip_set_hash_ipportip ip_set_hash_ipportnet ip_set_hash_ipport ip_set_bitmap_port xt_comment iptable_nat nf_nat iptable_filter ip_tables ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sn_core_odd(OE) i40e overlay binfmt_misc tun bonding(OE) aisqos(OE) aisqo---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: nxp: imx8-isi: Fix streaming cleanup on releaseThe current implementation unconditionally callsmxc_isi_video_cleanup_streaming() in mxc_isi_video_release(). This canlead to situations where any release call (like from a simple"v4l2-ctl -l") may release a currently streaming queue when called onsuch a device.This is reproducible on an i.MX8MP board by streaming from an ISIcapture device using gstreamer: gst-launch-1.0 -v v4l2src device=/dev/videoX ! \ video/x-raw,format=GRAY8,width=1280,height=800,framerate=1/120 ! \ fakesinkWhile this stream is running, querying the caps of the same deviceprovokes the error state: v4l2-ctl -l -d /dev/videoXThis results in the following trace:[ 155.452152] ------------[ cut here ]------------[ 155.452163] WARNING: CPU: 0 PID: 1708 at drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c:713 mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi][ 157.004248] Modules linked in: cfg80211 rpmsg_ctrl rpmsg_char rpmsg_tty virtio_rpmsg_bus rpmsg_ns rpmsg_core rfkill nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables mcp251x6[ 157.053499] CPU: 0 UID: 0 PID: 1708 Comm: python3 Not tainted 6.15.4-00114-g1f61ca5cad76 #1 PREEMPT[ 157.064369] Hardware name: imx8mp_board_01 (DT)[ 157.068205] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 157.075169] pc : mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi][ 157.081195] lr : mxc_isi_pipe_irq_handler+0x38/0x1b0 [imx8_isi][ 157.087126] sp : ffff800080003ee0[ 157.090438] x29: ffff800080003ee0 x28: ffff0000c3688000 x27: 0000000000000000[ 157.097580] x26: 0000000000000000 x25: ffff0000c1e7ac00 x24: ffff800081b5ad50[ 157.104723] x23: 00000000000000d1 x22: 0000000000000000 x21: ffff0000c25e4000[ 157.111866] x20: 0000000060000200 x19: ffff80007a0608d0 x18: 0000000000000000[ 157.119008] x17: ffff80006a4e3000 x16: ffff800080000000 x15: 0000000000000000[ 157.126146] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000[ 157.133287] x11: 0000000000000040 x10: ffff0000c01445f0 x9 : ffff80007a053a38[ 157.140425] x8 : ffff0000c04004b8 x7 : 0000000000000000 x6 : 0000000000000000[ 157.147567] x5 : ffff0000c0400490 x4 : ffff80006a4e3000 x3 : ffff0000c25e4000[ 157.154706] x2 : 0000000000000000 x1 : ffff8000825c0014 x0 : 0000000060000200[ 157.161850] Call trace:[ 157.164296] mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] (P)[ 157.170319] __handle_irq_event_percpu+0x58/0x218[ 157.175029] handle_irq_event+0x54/0xb8[ 157.178867] handle_fasteoi_irq+0xac/0x248[ 157.182968] handle_irq_desc+0x48/0x68[ 157.186723] generic_handle_domain_irq+0x24/0x38[ 157.191346] gic_handle_irq+0x54/0x120[ 157.195098] call_on_irq_stack+0x24/0x30[ 157.199027] do_interrupt_handler+0x88/0x98[ 157.203212] el0_interrupt+0x44/0xc0[ 157.206792] __el0_irq_handler_common+0x18/0x28[ 157.211328] el0t_64_irq_handler+0x10/0x20[ 157.215429] el0t_64_irq+0x198/0x1a0[ 157.219009] ---[ end trace 0000000000000000 ]---Address this issue by moving the streaming preparation and cleanup tothe vb2 .prepare_streaming() and .unprepare_streaming() operations. Thisalso simplifies the driver by allowing direct usage of thevb2_ioctl_streamon() and vb2_ioctl_streamoff() helpers, and removal ofthe manual cleanup from mxc_isi_video_release().
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-cgroup: fix possible deadlock while configuring policyFollowing deadlock can be triggered easily by lockdep:WARNING: possible circular locking dependency detected6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted------------------------------------------------------check/1334 is trying to acquire lock:ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180but task is already holding lock:ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110which lock already depends on the new lock.the existing dependency chain (in reverse order) is:-> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}: blk_queue_enter+0x40b/0x470 blkg_conf_prep+0x7b/0x3c0 tg_set_limit+0x10a/0x3e0 cgroup_file_write+0xc6/0x420 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e-> #1 (&q->rq_qos_mutex){+.+.}-{4:4}: __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 wbt_init+0x17e/0x280 wbt_enable_default+0xe9/0x140 blk_register_queue+0x1da/0x2e0 __add_disk+0x38c/0x5d0 add_disk_fwnode+0x89/0x250 device_add_disk+0x18/0x30 virtblk_probe+0x13a3/0x1800 virtio_dev_probe+0x389/0x610 really_probe+0x136/0x620 __driver_probe_device+0xb3/0x230 driver_probe_device+0x2f/0xe0 __driver_attach+0x158/0x250 bus_for_each_dev+0xa9/0x130 driver_attach+0x26/0x40 bus_add_driver+0x178/0x3d0 driver_register+0x7d/0x1c0 __register_virtio_driver+0x2c/0x60 virtio_blk_init+0x6f/0xe0 do_one_initcall+0x94/0x540 kernel_init_freeable+0x56a/0x7b0 kernel_init+0x2b/0x270 ret_from_fork+0x268/0x4c0 ret_from_fork_asm+0x1a/0x30-> #0 (&q->sysfs_lock){+.+.}-{4:4}: __lock_acquire+0x1835/0x2940 lock_acquire+0xf9/0x450 __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 blk_unregister_queue+0x53/0x180 __del_gendisk+0x226/0x690 del_gendisk+0xba/0x110 sd_remove+0x49/0xb0 [sd_mod] device_remove+0x87/0xb0 device_release_driver_internal+0x11e/0x230 device_release_driver+0x1a/0x30 bus_remove_device+0x14d/0x220 device_del+0x1e1/0x5a0 __scsi_remove_device+0x1ff/0x2f0 scsi_remove_device+0x37/0x60 sdev_store_delete+0x77/0x100 dev_attr_store+0x1f/0x40 sysfs_kf_write+0x65/0x90 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7eother info that might help us debug this:Chain exists of: &q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#3); lock(&q->rq_qos_mutex); lock(&q->q_usage_counter(queue)#3); lock(&q->sysfs_lock);Root cause is that queue_usage_counter is grabbed with rq_qos_mutexheld in blkg_conf_prep(), while queue should be freezed beforerq_qos_mutex from other context.The blk_queue_enter() from blkg_conf_prep() is used to protect againstpolicy deactivation, which is already protected with blkcg_mutex, henceconvert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,consider that blkcg_mutex is held after queue is freezed from policydeactivation, also convert blkg_alloc() to use GFP_NOIO.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAPAs reported by Luiz Capitulino enabling HVO on s390 leads to reproduciblecrashes. The problem is that kernel page tables are modified withoutflushing corresponding TLB entries.Even if it looks like the empty flush_tlb_all() implementation on s390 isthe problem, it is actually a different problem: on s390 it is not allowedto replace an active/valid page table entry with another valid page tableentry without the detour over an invalid entry. A direct replacement maylead to random crashes and/or data corruption.In order to invalidate an entry special instructions have to be used(e.g. ipte or idte). Alternatively there are also special instructionsavailable which allow to replace a valid entry with a different validentry (e.g. crdte or cspg).Given that the HVO code currently does not provide the hooks to allow foran implementation which is compliant with the s390 architecturerequirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which isbasically a revert of the original patch which enabled it.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/mediatek: Disable AFBC support on Mediatek DRM driverCommit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRMdriver") added AFBC support to Mediatek DRM and enabled the32x8/split/sparse modifier.However, this is currently broken on Mediatek MT8188 (Genio 700 EVKplatform); tested using upstream Kernel and Mesa (v25.2.1), AFBC is used bydefault since Mesa v25.0.Kernel trace reports vblank timeouts constantly, and the render is garbled:```[CRTC:62:crtc-0] vblank wait timed outWARNING: CPU: 7 PID: 70 at drivers/gpu/drm/drm_atomic_helper.c:1835 drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c[...]Hardware name: MediaTek Genio-700 EVK (DT)Workqueue: events_unbound commit_workpstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27clr : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27csp : ffff80008337bca0x29: ffff80008337bcd0 x28: 0000000000000061 x27: 0000000000000000x26: 0000000000000001 x25: 0000000000000000 x24: ffff0000c9dcc000x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c66f2f80x20: ffff0000c0d7d880 x19: 0000000000000000 x18: 000000000000000ax17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000x14: 0000000000000000 x13: 74756f2064656d69 x12: 742074696177206bx11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082396a70x8 : 0000000000057fa8 x7 : 0000000000000cce x6 : ffff8000823eea70x5 : ffff0001fef5f408 x4 : ffff80017ccee000 x3 : ffff0000c12cb480x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c12cb480Call trace: drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c (P) drm_atomic_helper_commit_tail_rpm+0x64/0x80 commit_tail+0xa4/0x1a4 commit_work+0x14/0x20 process_one_work+0x150/0x290 worker_thread+0x2d0/0x3ec kthread+0x12c/0x210 ret_from_fork+0x10/0x20---[ end trace 0000000000000000 ]---```Until this gets fixed upstream, disable AFBC support on this platform, asit's currently broken with upstream Mesa.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udp_tunnel: use netdev_warn() instead of netdev_WARN()netdev_WARN() uses WARN/WARN_ON to print a backtrace along withfile and line information. In this case, udp_tunnel_nic_register()returning an error is just a failed operation, not a kernel bug.udp_tunnel_nic_register() can fail due to a memory allocationfailure (kzalloc() or udp_tunnel_nic_alloc()).This is a normal runtime error and not a kernel bug.Replace netdev_WARN() with netdev_warn() accordingly.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Add bpf_prog_run_data_pointers()syzbot found that cls_bpf_classify() is able to changetc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:Extend qdisc control block with tc control block"), which added a wronginteraction with db58ba459202 ("bpf: wire in data and data_end forcls_act_bpf").drop_reason was added later.Add bpf_prog_run_data_pointers() helper to save/restore the net_schedstorage colliding with BPF data_meta/data_end.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pmdomain: arm: scmi: Fix genpd leak on provider registration failureIf of_genpd_add_provider_onecell() fails during probe, the previouslycreated generic power domains are not removed, leading to a memory leakand potential kernel crash later in genpd_debug_add().Add proper error handling to unwind the initialized domains beforereturning from probe to ensure all resources are correctly released onfailure.Example crash trace observed without this fix: | Unable to handle kernel paging request at virtual address fffffffffffffc70 | CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : genpd_debug_add+0x2c/0x160 | lr : genpd_debug_init+0x74/0x98 | Call trace: | genpd_debug_add+0x2c/0x160 (P) | genpd_debug_init+0x74/0x98 | do_one_initcall+0xd0/0x2d8 | do_initcall_level+0xa0/0x140 | do_initcalls+0x60/0xa8 | do_basic_setup+0x28/0x40 | kernel_init_freeable+0xe8/0x170 | kernel_init+0x2c/0x140 | ret_from_fork+0x10/0x20
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_ct: add seqadj extension for natted connectionsSequence adjustment may be required for FTP traffic with PASV/EPSV modes.due to need to re-write packet payload (IP, port) on the ftp controlconnection. This can require changes to the TCP length and expectedseq / ack_seq.The easiest way to reproduce this issue is with PASV mode.Example ruleset:table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" }}table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } }}Note that the ftp helper gets assigned *after* the dnat setup.The inverse (nat after helper assign) is handled by an existingcheck in nf_nat_setup_info() and will not show the problem.Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ftp nat changes do not work as expected in this case:Connected to 192.168.100.1.[..]ftp> epsvEPSV/EPRT on IPv4 off.ftp> ls227 Entering passive mode (192,168,100,1,209,129).421 Service not available, remote server has closed connection.Kernel logs:Missing nfct_seqadj_ext_add() setup callWARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41[..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 ..Fix this by adding the required extension when a conntrack helper is assignedto a connection that has a nat binding.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mlx5: Fix default values in create CQCurrently, CQs without a completion function are assigned themlx5_add_cq_to_tasklet function by default. This is problematic sinceonly user CQs created through the mlx5_ib driver are intended to usethis function.Additionally, all CQs that will use doorbells instead of polling forcompletions must call mlx5_cq_arm. However, the default CQ creation flowleaves a valid value in the CQ's arm_db field, allowing FW to sendinterrupts to polling-only CQs in certain corner cases.These two factors would allow a polling-only kernel CQ to be triggeredby an EQ interrupt and call a completion function intended only for userCQs, causing a null pointer exception.Some areas in the driver have prevented this issue with one-off fixesbut did not address the root cause.This patch fixes the described issue by adding defaults to the create CQflow. It adds a default dummy completion function to protect againstnull pointer exceptions, and it sets an invalid command sequence numberby default in kernel CQs to prevent the FW from sending an interrupt tothe CQ until it is armed. User CQs are responsible for their owninitialization values.Callers of mlx5_core_create_cq are responsible for changing thecompletion function and arming the CQ per their needs.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksm: use range-walk function to jump over holes in scan_get_next_rmap_itemCurrently, scan_get_next_rmap_item() walks every page address in a VMA tolocate mergeable pages. This becomes highly inefficient when scanninglarge virtual memory areas that contain mostly unmapped regions, causingksmd to use large amount of cpu without deduplicating much pages.This patch replaces the per-address lookup with a range walk usingwalk_page_range(). The range walker allows KSM to skip over entireunmapped holes in a VMA, avoiding unnecessary lookups. This problem waspreviously discussed in [1].Consider the following test program which creates a 32 TiB mapping in thevirtual address space but only populates a single page:#include #include #include /* 32 TiB */const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;int main() { char *area = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0); if (area == MAP_FAILED) { perror("mmap() failed\n"); return -1; } /* Populate a single page such that we get an anon_vma. */ *area = 0; /* Enable KSM. */ madvise(area, size, MADV_MERGEABLE); pause(); return 0;}$ ./ksm-sparse &$ echo 1 > /sys/kernel/mm/ksm/run Without this patch ksmd uses 100% of the cpu for a long time (more then 1hour in my test machine) scanning all the 32 TiB virtual address spacethat contain only one mapped page. This makes ksmd essentially deadlockednot able to deduplicate anything of value. With this patch ksmd walksonly the one mapped page and skips the rest of the 32 TiB virtual addressspace, making the scan fast using little cpu.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:timers: Fix NULL function pointer race in timer_shutdown_sync()There is a race condition between timer_shutdown_sync() and timerexpiration that can lead to hitting a WARN_ON in expire_timers().The issue occurs when timer_shutdown_sync() clears the timer functionto NULL while the timer is still running on another CPU. The racescenario looks like this:CPU0 CPU1 lock_timer_base() expire_timers() base->running_timer = timer; unlock_timer_base() [call_timer_fn enter] mod_timer() ...timer_shutdown_sync()lock_timer_base()// For now, will not detach the timer but only clear its function to NULLif (base->running_timer != timer) ret = detach_if_pending(timer, base, true);if (shutdown) timer->function = NULL;unlock_timer_base() [call_timer_fn exit] lock_timer_base() base->running_timer = NULL; unlock_timer_base() ... // Now timer is pending while its function set to NULL. // next timer trigger expire_timers() WARN_ON_ONCE(!fn) // hit ...lock_timer_base()// Now timer will detachif (base->running_timer != timer) ret = detach_if_pending(timer, base, true);if (shutdown) timer->function = NULL;unlock_timer_base()The problem is that timer_shutdown_sync() clears the timer functionregardless of whether the timer is currently running. This can leave apending timer with a NULL function pointer, which triggers theWARN_ON_ONCE(!fn) check in expire_timers().Fix this by only clearing the timer function when actually detaching thetimer. If the timer is running, leave the function pointer intact, which issafe because the timer will be properly detached when it finishes running.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: fix memory leak in smb3_fs_context_parse_param error pathAdd proper cleanup of ctx->source and fc->source to thecifs_parse_mount_err error handler. This ensures that memory allocatedfor the source strings is correctly freed on all error paths, matchingthe cleanup already performed in the success path bysmb3_cleanup_fs_context_contents().Pointers are also set to NULL after freeing to prevent potentialdouble-free issues.This change fixes a memory leak originally detected by syzbot. Theleak occurred when processing Opt_source mount options if an errorhappened after ctx->source and fc->source were successfullyallocated but before the function completed.The specific leak sequence was:1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory3. A subsequent error jumps to cifs_parse_mount_err4. The old error handler freed passwords but not the source strings,causing the memory to leak.This issue was not addressed by commit e8c73eb7db0a ("cifs: client:fix memory leak in smb3_fs_context_parse_param"), which only fixedleaks from repeated fsconfig() calls but not this error path.Patch updated with minor change suggested by kernel test robot
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: Fix proto fallback detection with BPFThe sockmap feature allows bpf syscall from userspace, or basedon bpf sockops, replacing the sk_prot of sockets during protocol stackprocessing with sockmap's custom read/write interfaces.'''tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot'''When the server has MPTCP enabled but the client sends a TCP SYNwithout MPTCP, subflow_syn_recv_sock() performs a fallback on thesubflow, replacing the subflow sk's sk_prot with the native sk_prot.'''subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override()'''Then, this subflow can be normally used by sockmap, which replaces thenative sk_prot with sockmap's custom sk_prot. The issue occurs when theuser executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops().Here, it uses sk->sk_prot to compare with the native sk_prot, but thisis incorrect when sockmap is used, as we may incorrectly setsk->sk_socket->ops.This fix uses the more generic sk_family for the comparison instead.Additionally, this also prevents a WARNING from occurring:result from ./scripts/decode_stacktrace.sh:------------[ cut here ]------------WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \(net/mptcp/protocol.c:4005)Modules linked in:...PKRU: 55555554Call Trace:do_accept (net/socket.c:1989)__sys_accept4 (net/socket.c:2028 net/socket.c:2057)__x64_sys_accept (net/socket.c:2067)x64_sys_call (arch/x86/entry/syscall_64.c:41)do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)RIP: 0033:0x7f87ac92b83d---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show()If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and weattempt to dereference it in tcm_loop_tpg_address_show() we will get asegfault, see below for an example. So, check tl_hba->sh beforedereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop]... Call Trace: configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0...
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix gpu page fault after hibernation on PF passthroughOn PF passthrough environment, after hibernate and then resume, coralgemmwill cause gpu page fault.Mode1 reset happens during hibernate, but partition mode is not restoredon resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not rightafter resume. When CP access the MQD BO, wrong stride size is used,this will cause out of bound access on the MQD BO, resulting page fault.The fix is to ensure gfx_v9_4_3_switch_compute_partition() is calledwhen resume from a hibernation.KFD resume is called separately during a reset recovery or resume fromsuspend sequence. Hence it's not required to be called as part ofpartition switch.(cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a)
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/mempool: fix poisoning order>0 pages with HIGHMEMThe kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283)Christoph found out this is due to the poisoning code not dealingproperly with CONFIG_HIGHMEM because only the first page is mapped butthen the whole potentially high-order page is accessed.We could give up on HIGHMEM here, but it's straightforward to fix thiswith a loop that's mapping, poisoning or checking and unmappingindividual pages.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:binfmt_misc: restore write access before closing files opened by open_exec()bm_register_write() opens an executable file using open_exec(), whichinternally calls do_open_execat() and denies write access on the file toavoid modification while it is being executed.However, when an error occurs, bm_register_write() closes the file usingfilp_close() directly. This does not restore the write permission, whichmay cause subsequent write operations on the same file to fail.Fix this by calling exe_file_allow_write_access() before filp_close() torestore the write permission properly.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: route: Prevent rt_bind_exception() from rebinding stale fnheThe sit driver's packet transmission path calls: sit_tunnel_xmit() ->update_or_create_fnhe(), which lead to fnhe_remove_oldest() being calledto delete entries exceeding FNHE_RECLAIM_DEPTH+random.The race window is between fnhe_remove_oldest() selecting fnheX fordeletion and the subsequent kfree_rcu(). During this time, theconcurrent path's __mkroute_output() -> find_exception() can fetch thesoon-to-be-deleted fnheX, and rt_bind_exception() then binds it with anew dst using a dst_hold(). When the original fnheX is freed via RCU,the dst reference remains permanently leaked.CPU 0 CPU 1__mkroute_output() find_exception() [fnheX] update_or_create_fnhe() fnhe_remove_oldest() [fnheX] rt_bind_exception() [bind dst] RCU callback [fnheX freed, dst leak]This issue manifests as a device reference count leak and a warning indmesg when unregistering the net device: unregister_netdevice: waiting for sitX to become free. Usage count = NIdo Schimmel provided the simple test validation method [1].The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes().Since rt_bind_exception() checks this field, setting it to zero preventsthe stale fnhe from being reused and bound to a new dst just before itis freed.[1]ip netns add ns1ip -n ns1 link set dev lo upip -n ns1 address add 192.0.2.1/32 dev loip -n ns1 link add name dummy1 up type dummyip -n ns1 route add 192.0.2.2/32 dev dummy1ip -n ns1 link add name gretap1 up arp off type gretap \ local 192.0.2.1 remote 192.0.2.2ip -n ns1 route add 198.51.0.0/16 dev gretap1taskset -c 0 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &taskset -c 2 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &sleep 10ip netns pids ns1 | xargs killip netns del ns1
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: netpoll: fix incorrect refcount handling causing incorrect cleanupcommit efa95b01da18 ("netpoll: fix use after free") incorrectlyignored the refcount and prematurely set dev->npinfo to NULL duringnetpoll cleanup, leading to improper behavior and memory leaks.Scenario causing lack of proper cleanup:1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is allocated, and refcnt = 1 - Keep in mind that npinfo is shared among all netpoll instances. In this case, there is just one.2) Another netpoll is also associated with the same NIC and npinfo->refcnt += 1. - Now dev->npinfo->refcnt = 2; - There is just one npinfo associated to the netdev.3) When the first netpolls goes to clean up: - The first cleanup succeeds and clears np->dev->npinfo, ignoring refcnt. - It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);` - Set dev->npinfo = NULL, without proper cleanup - No ->ndo_netpoll_cleanup() is either called4) Now the second target tries to clean up - The second cleanup fails because np->dev->npinfo is already NULL. * In this case, ops->ndo_netpoll_cleanup() was never called, and the skb pool is not cleaned as well (for the second netpoll instance) - This leaks npinfo and skbpool skbs, which is clearly reported by kmemleak.Revert commit efa95b01da18 ("netpoll: fix use after free") and addsclarifying comments emphasizing that npinfo cleanup should only happenonce the refcount reaches zero, ensuring stable and correct netpollbehavior.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: avoid infinite loops due to corrupted subpage compact indexesRobert reported an infinite loop observed by two crafted images.The root cause is that `clusterofs` can be larger than `lclustersize`for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.: blocksize = lclustersize = 512 lcn = 6 clusterofs = 515Move the corresponding check for full compress indexes to`z_erofs_load_lcluster_from_disk()` to also cover subpage compactcompress indexes.It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`check, since it should be placed right after`z_erofs_load_{compact,full}_lcluster()`.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replacedWhen re-injecting a soft interrupt from an INT3, INT0, or (select) INTninstruction, discard the exception and retry the instruction if the codestream is changed (e.g. by a different vCPU) between when the CPUexecutes the instruction and when KVM decodes the instruction to get thenext RIP.As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-injectINT3/INTO instead of retrying the instruction"), failure to verify thatthe correct INTn instruction was decoded can effectively clobber gueststate due to decoding the wrong instruction and thus specifying thewrong next RIP.The bug most often manifests as "Oops: int3" panics on static branchchecks in Linux guests. Enabling or disabling a static branch in Linuxuses the kernel's "text poke" code patching mechanism. To modify codewhile other CPUs may be executing that code, Linux (temporarily)replaces the first byte of the original instruction with an int3 (opcode0xcc), then patches in the new code stream except for the first byte,and finally replaces the int3 with the first byte of the new codestream. If a CPU hits the int3, i.e. executes the code while it's beingmodified, then the guest kernel must look up the RIP to determine how tohandle the #BP, e.g. by emulating the new instruction. If the RIP isincorrect, then this lookup fails and the guest kernel panics.The bug reproduces almost instantly by hacking the guest kernel torepeatedly check a static branch[1] while running a drgn script[2] onthe host to constantly swap out the memory containing the guest's TSS.[1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a[2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: add i_data_sem protection in ext4_destroy_inline_data_nolock()Fix a race between inline data destruction and block mapping.The function ext4_destroy_inline_data_nolock() changes the inode datalayout by clearing EXT4_INODE_INLINE_DATA and setting EXT4_INODE_EXTENTS.At the same time, another thread may execute ext4_map_blocks(), whichtests EXT4_INODE_EXTENTS to decide whether to call ext4_ext_map_blocks()or ext4_ind_map_blocks().Without i_data_sem protection, ext4_ind_map_blocks() may receive inodewith EXT4_INODE_EXTENTS flag and triggering assert.kernel BUG at fs/ext4/indirect.c:546!EXT4-fs (loop2): unmounting filesystem.invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTIHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014RIP: 0010:ext4_ind_map_blocks.cold+0x2b/0x5a fs/ext4/indirect.c:546Call Trace: ext4_map_blocks+0xb9b/0x16f0 fs/ext4/inode.c:681 _ext4_get_block+0x242/0x590 fs/ext4/inode.c:822 ext4_block_write_begin+0x48b/0x12c0 fs/ext4/inode.c:1124 ext4_write_begin+0x598/0xef0 fs/ext4/inode.c:1255 ext4_da_write_begin+0x21e/0x9c0 fs/ext4/inode.c:3000 generic_perform_write+0x259/0x5d0 mm/filemap.c:3846 ext4_buffered_write_iter+0x15b/0x470 fs/ext4/file.c:285 ext4_file_write_iter+0x8e0/0x17f0 fs/ext4/file.c:679 call_write_iter include/linux/fs.h:2271 [inline] do_iter_readv_writev+0x212/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10f/0x170 fs/splice.c:950 splice_direct_to_actor+0x33a/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In 0.9-rc2 and earlier, an unprivileged local users can crash avahi-daemon (with wide-area disabled) by creating record browsers with the AVAHI_LOOKUP_USE_WIDE_AREA flag set via D-Bus. This can be done by either callingthe RecordBrowserNew method directly or creating hostname/address/service resolvers/browsers that create those browsers internally themselves.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.18.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: udc: fix use-after-free in usb_gadget_state_workA race condition during gadget teardown can lead to a use-after-freein usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_workThe fundamental race occurs because a concurrent event (e.g., aninterrupt) can call usb_gadget_set_state() and schedule gadget->workat any time during the cleanup process in usb_del_gadget().Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue afterdevice removal") attempted to fix this by moving flush_work() to afterdevice_del(). However, this does not fully solve the race, as a newwork item can still be scheduled *after* flush_work() completes butbefore the gadget's memory is freed, leading to the same use-after-free.This patch fixes the race condition robustly by introducing a 'teardown'flag and a 'state_lock' spinlock to the usb_gadget struct. The flag isset during cleanup in usb_del_gadget() *before* calling flush_work() toprevent any new work from being scheduled once cleanup has commenced.The scheduling site, usb_gadget_set_state(), now checks this flag underthe lock before queueing the work, thus safely closing the race window.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix memory leak in cifs_construct_tcon()When having a multiuser mount with domain= specified and usingcifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,so it needs to be freed before leaving cifs_construct_tcon().This fixes the following memory leak reported by kmemleak: mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,... su - testuser cifscreds add -d ZELDA -u testuser ... ls /mnt/1 ... umount /mnt echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8881203c3f08 (size 8): comm "ls", pid 5060, jiffies 4307222943 hex dump (first 8 bytes): 5a 45 4c 44 41 00 cc cc ZELDA... backtrace (crc d109a8cf): __kmalloc_node_track_caller_noprof+0x572/0x710 kstrdup+0x3a/0x70 cifs_sb_tlink+0x1209/0x1770 [cifs] cifs_get_fattr+0xe1/0xf50 [cifs] cifs_get_inode_info+0xb5/0x240 [cifs] cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs] cifs_getattr+0x28e/0x450 [cifs] vfs_getattr_nosec+0x126/0x180 vfs_statx+0xf6/0x220 do_statx+0xab/0x110 __x64_sys_statx+0xd5/0x130 do_syscall_64+0xbb/0x380 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setupProtect vga_switcheroo_client_fb_set() with console lock. Avoids OOBaccess in fbcon_remap_all(). Without holding the console lock the callraces with switching outputs.VGA switcheroo calls fbcon_remap_all() when switching clients. The fbconfunction uses struct fb_info.node, which is set by register_framebuffer().As the fb-helper code currently sets up VGA switcheroo before registeringthe framebuffer, the value of node is -1 and therefore not a legal value.For example, fbcon uses the value within set_con2fb_map() [1] as an indexinto an array.Moving vga_switcheroo_client_fb_set() after register_framebuffer() canresult in VGA switching that does not switch fbcon correctly.Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),which already holds the console lock. Fbdev calls fbcon_fb_registered()from within register_framebuffer(). Serializes the helper with VGAswitcheroo's call to fbcon_remap_all().Although vga_switcheroo_client_fb_set() takes an instance of struct fb_infoas parameter, it really only needs the contained fbcon state. Moving thecall to fbcon initialization is therefore cleaner than before. Only amdgpu,i915, nouveau and radeon support vga_switcheroo. For all other drivers,this change does nothing.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix crash in process_v2_sparse_read() for encrypted directoriesThe crash in process_v2_sparse_read() for fscrypt-encrypted directorieshas been reported. Issue takes place for Ceph msgr2 protocol in securemode. It can be reproduced by the steps:sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure(1) mkdir /mnt/cephfs/fscrypt-test-3(2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3(3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3(4) fscrypt lock /mnt/cephfs/fscrypt-test-3(5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3(6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar(7) Issue has been triggered[ 408.072247] ------------[ cut here ]------------[ 408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865ceph_con_v2_try_read+0x4b39/0x72f0[ 408.072267] Modules linked in: intel_rapl_msr intel_rapl_commonintel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discoverypmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypasspolyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouseserio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfgpata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore[ 408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+[ 408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS1.17.0-5.fc42 04/01/2014[ 408.072310] Workqueue: ceph-msgr ceph_con_workfn[ 408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0[ 408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f88e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85[ 408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246[ 408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38[ 408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000[ 408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8[ 408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8[ 408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000[ 408.072329] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000)knlGS:0000000000000000[ 408.072331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0[ 408.072336] PKRU: 55555554[ 408.072337] Call Trace:[ 408.072338] [ 408.072340] ? sched_clock_noinstr+0x9/0x10[ 408.072344] ? __pfx_ceph_con_v2_try_read+0x10/0x10[ 408.072347] ? _raw_spin_unlock+0xe/0x40[ 408.072349] ? finish_task_switch.isra.0+0x15d/0x830[ 408.072353] ? __kasan_check_write+0x14/0x30[ 408.072357] ? mutex_lock+0x84/0xe0[ 408.072359] ? __pfx_mutex_lock+0x10/0x10[ 408.072361] ceph_con_workfn+0x27e/0x10e0[ 408.072364] ? metric_delayed_work+0x311/0x2c50[ 408.072367] process_one_work+0x611/0xe20[ 408.072371] ? __kasan_check_write+0x14/0x30[ 408.072373] worker_thread+0x7e3/0x1580[ 408.072375] ? __pfx__raw_spin_lock_irqsave+0x10/0x10[ 408.072378] ? __pfx_worker_thread+0x10/0x10[ 408.072381] kthread+0x381/0x7a0[ 408.072383] ? __pfx__raw_spin_lock_irq+0x10/0x10[ 408.072385] ? __pfx_kthread+0x10/0x10[ 408.072387] ? __kasan_check_write+0x14/0x30[ 408.072389] ? recalc_sigpending+0x160/0x220[ 408.072392] ? _raw_spin_unlock_irq+0xe/0x50[ 408.072394] ? calculate_sigpending+0x78/0xb0[ 408.072395] ? __pfx_kthread+0x10/0x10[ 408.072397] ret_from_fork+0x2b6/0x380[ 408.072400] ? __pfx_kthread+0x10/0x10[ 408.072402] ret_from_fork_asm+0x1a/0x30[ 408.072406] [ 408.072407] ---[ end trace 0000000000000000 ]---[ 408.072418] Oops: general protection fault, probably for non-canonicaladdress 0xdffffc00000000---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: atlantic: fix fragment overflow handling in RX pathThe atlantic driver can receive packets with more than MAX_SKB_FRAGS (17)fragments when handling large multi-descriptor packets. This causes anout-of-bounds write in skb_add_rx_frag_netmem() leading to kernel panic.The issue occurs because the driver doesn't check the total number offragments before calling skb_add_rx_frag(). When a packet requires morethan MAX_SKB_FRAGS fragments, the fragment index exceeds the array bounds.Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE,then all fragments are accounted for. And reusing the existing check toprevent the overflow earlier in the code path.This crash occurred in production with an Aquantia AQC113 10G NIC.Stack trace from production environment:```RIP: 0010:skb_add_rx_frag_netmem+0x29/0xd0Code: 90 f3 0f 1e fa 0f 1f 44 00 00 48 89 f8 41 89ca 48 89 d7 48 63 ce 8b 90 c0 00 00 00 48 c1 e1 04 48 01 ca 48 03 90c8 00 00 00 <48> 89 7a 30 44 89 52 3c 44 89 42 38 40 f6 c7 01 75 74 4889 fa 83RSP: 0018:ffffa9bec02a8d50 EFLAGS: 00010287RAX: ffff925b22e80a00 RBX: ffff925ad38d2700 RCX:fffffffe0a0c8000RDX: ffff9258ea95bac0 RSI: ffff925ae0a0c800 RDI:0000000000037a40RBP: 0000000000000024 R08: 0000000000000000 R09:0000000000000021R10: 0000000000000848 R11: 0000000000000000 R12:ffffa9bec02a8e24R13: ffff925ad8615570 R14: 0000000000000000 R15:ffff925b22e80a00FS: 0000000000000000(0000)GS:ffff925e47880000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: ffff9258ea95baf0 CR3: 0000000166022004 CR4:0000000000f72ef0PKRU: 55555554Call Trace:aq_ring_rx_clean+0x175/0xe60 [atlantic]? aq_ring_rx_clean+0x14d/0xe60 [atlantic]? aq_ring_tx_clean+0xdf/0x190 [atlantic]? kmem_cache_free+0x348/0x450? aq_vec_poll+0x81/0x1d0 [atlantic]? __napi_poll+0x28/0x1c0? net_rx_action+0x337/0x420```Changes in v4:- Add Fixes: tag to satisfy patch validation requirements.Changes in v3:- Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE, then all fragments are accounted for.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: sxgbe: fix potential NULL dereference in sxgbe_rx()Currently, when skb is null, the driver prints an error and thendereferences skb on the next line.To fix this, let's add a 'break' after the error message to switchto sxgbe_rx_refill(), which is similar to the approach taken by theother drivers in this particular case, e.g. calxeda with xgmac_rx().Found during a code review.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_core: lookup hci_conn on RX path on protocol sideThe hdev lock/lookup/unlock/use pattern in the packet RX path doesn'tensure hci_conn* is not concurrently modified/deleted. This lockingappears to be leftover from before conn_hash started using RCUcommit bf4c63252490b ("Bluetooth: convert conn hash to RCU")and not clear if it had purpose since then.Currently, there are code paths that delete hci_conn* from elsewherethan the ordered hdev->workqueue where the RX work runs in. E.g.commit 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")introduced some of these, and there probably were a few others beforeit. It's better to do the locking so that even if these runconcurrently no UAF is possible.Move the lookup of hci_conn and associated socket-specific conn toprotocol recv handlers, and do them within a single critical sectionto cover hci_conn* usage and lookup.syzkaller has reported a crash that appears to be this issue: [Task hdev->workqueue] [Task 2] hci_disconnect_all_sync l2cap_recv_acldata(hcon) hci_conn_get(hcon) hci_abort_conn_sync(hcon) hci_dev_lock hci_dev_lock hci_conn_del(hcon) v-------------------------------- hci_dev_unlock hci_conn_put(hcon) conn = hcon->l2cap_data (UAF)
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:lan966x: Fix sleeping in atomic contextThe following warning was seen when we try to connect using ssh to the device.BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbearpreempt_count: 1, expected: 0INFO: lockdep is turned off.CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONETainted: [W]=WARNHardware name: Generic DT based systemCall trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __might_resched+0x16c/0x2b0 __might_resched from __mutex_lock+0x64/0xd34 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from lan966x_stats_get+0x5c/0x558 lan966x_stats_get from dev_get_stats+0x40/0x43c dev_get_stats from dev_seq_printf_stats+0x3c/0x184 dev_seq_printf_stats from dev_seq_show+0x10/0x30 dev_seq_show from seq_read_iter+0x350/0x4ec seq_read_iter from seq_read+0xfc/0x194 seq_read from proc_reg_read+0xac/0x100 proc_reg_read from vfs_read+0xb0/0x2b0 vfs_read from ksys_read+0x6c/0xec ksys_read from ret_fast_syscall+0x0/0x1cException stack(0xf0b11fa8 to 0xf0b11ff0)1fa0: 00000001 00001000 00000008 be9048d8 00001000 000000011fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 000000011fe0: 0005404c be9048c0 00018684 b6ec2cd8It seems that we are using a mutex in a atomic context which is wrong.Change the mutex with a spinlock.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_cake: Fix incorrect qlen reduction in cake_dropIn cake_drop(), qdisc_tree_reduce_backlog() is used to update the qlenand backlog of the qdisc hierarchy. Its caller, cake_enqueue(), assumesthat the parent qdisc will enqueue the current packet. However, thisassumption breaks when cake_enqueue() returns NET_XMIT_CN: the parentqdisc stops enqueuing current packet, leaving the tree qlen/backlogaccounting inconsistent. This mismatch can lead to a NULL dereference(e.g., when the parent Qdisc is qfq_qdisc).This patch computes the qlen/backlog delta in a more robust way byobserving the difference before and after the series of cake_drop()calls, and then compensates the qdisc tree accounting if cake_enqueue()returns NET_XMIT_CN.To ensure correct compensation when ACK thinning is enabled, a newvariable is introduced to keep qlen unchanged.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:locking/spinlock/debug: Fix data-race in do_raw_write_lockKCSAN reports:BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lockwrite (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1: do_raw_write_lock+0x120/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_forkread to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0: do_raw_write_lock+0x88/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_forkvalue changed: 0xffffffff -> 0x00000001Reported by Kernel Concurrency Sanitizer on:CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111Commit 1a365e822372 ("locking/spinlock/debug: Fix various data races") hasadressed most of these races, but seems to be not consistent/not complete.>From do_raw_write_lock() only debug_write_lock_after() part has beenconverted to WRITE_ONCE(), but not debug_write_lock_before() part.Do it now.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system corruptedThere's issue when file system corrupted:------------[ cut here ]------------kernel BUG at fs/jbd2/transaction.c:1289!Oops: invalid opcode: 0000 [#1] SMP KASAN PTICPU: 5 UID: 0 PID: 2031 Comm: mkdir Not tainted 6.18.0-rc1-nextRIP: 0010:jbd2_journal_get_create_access+0x3b6/0x4d0RSP: 0018:ffff888117aafa30 EFLAGS: 00010202RAX: 0000000000000000 RBX: ffff88811a86b000 RCX: ffffffff89a63534RDX: 1ffff110200ec602 RSI: 0000000000000004 RDI: ffff888100763010RBP: ffff888100763000 R08: 0000000000000001 R09: ffff888100763028R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000000R13: ffff88812c432000 R14: ffff88812c608000 R15: ffff888120bfc000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f91d6970c99 CR3: 00000001159c4000 CR4: 00000000000006f0Call Trace: __ext4_journal_get_create_access+0x42/0x170 ext4_getblk+0x319/0x6f0 ext4_bread+0x11/0x100 ext4_append+0x1e6/0x4a0 ext4_init_new_dir+0x145/0x1d0 ext4_mkdir+0x326/0x920 vfs_mkdir+0x45c/0x740 do_mkdirat+0x234/0x2f0 __x64_sys_mkdir+0xd6/0x120 do_syscall_64+0x5f/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe above issue occurs with us in errors=continue mode when accompanied bystorage failures. There have been many inconsistencies in the file systemdata.In the case of file system data inconsistency, for example, if the blockbitmap of a referenced block is not set, it can lead to the situation wherea block being committed is allocated and used again. As a result, thefollowing condition will not be satisfied then trigger BUG_ON. Of course,it is entirely possible to construct a problematic image that can triggerthis BUG_ON through specific operations. In fact, I have constructed suchan image and easily reproduced this issue.Therefore, J_ASSERT() holds true only under ideal conditions, but it maynot necessarily be satisfied in exceptional scenarios. Using J_ASSERT()directly in abnormal situations would cause the system to crash, which isclearly not what we want. So here we directly trigger a JBD abort insteadof immediately invoking BUG_ON.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalidFixes a crash when layout is null during this call stack:write_inode -> nfs4_write_inode -> pnfs_layoutcommit_inodepnfs_set_layoutcommit relies on the lseg refcount to keep the layoutaround. Need to clear NFS_INO_LAYOUTCOMMIT otherwise we might attemptto reference a null layout.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix racy bitfield write in btrfs_clear_space_info_full()From the memory-barriers.txt document regarding memory barrier orderingguarantees: (*) These guarantees do not apply to bitfields, because compilers often generate code to modify these using non-atomic read-modify-write sequences. Do not attempt to use bitfields to synchronize parallel algorithms. (*) Even in cases where bitfields are protected by locks, all fields in a given bitfield must be protected by one lock. If two fields in a given bitfield are protected by different locks, the compiler's non-atomic read-modify-write sequences can cause an update to one field to corrupt the value of an adjacent field.btrfs_space_info has a bitfield sharing an underlying word consisting ofthe fields full, chunk_alloc, and flush:struct btrfs_space_info { struct btrfs_fs_info * fs_info; /* 0 8 */ struct btrfs_space_info * parent; /* 8 8 */ ... int clamp; /* 172 4 */ unsigned int full:1; /* 176: 0 4 */ unsigned int chunk_alloc:1; /* 176: 1 4 */ unsigned int flush:1; /* 176: 2 4 */ ...Therefore, to be safe from parallel read-modify-writes losing a write toone of the bitfield members protected by a lock, all writes to all thebitfields must use the lock. They almost universally do, except forbtrfs_clear_space_info_full() which iterates over the space_infos andwrites out found->full = 0 without a lock.Imagine that we have one thread completing a transaction in which wefinished deleting a block_group and are thus callingbtrfs_clear_space_info_full() while simultaneously the data reclaimticket infrastructure is running do_async_reclaim_data_space(): T1 T2btrfs_commit_transaction btrfs_clear_space_info_full data_sinfo->full = 0 READ: full:0, chunk_alloc:0, flush:1 do_async_reclaim_data_space(data_sinfo) spin_lock(&space_info->lock); if(list_empty(tickets)) space_info->flush = 0; READ: full: 0, chunk_alloc:0, flush:1 MOD/WRITE: full: 0, chunk_alloc:0, flush:0 spin_unlock(&space_info->lock); return; MOD/WRITE: full:0, chunk_alloc:0, flush:1and now data_sinfo->flush is 1 but the reclaim worker has exited. Thisbreaks the invariant that flush is 0 iff there is no work queued orrunning. Once this invariant is violated, future allocations that gointo __reserve_bytes() will add tickets to space_info->tickets but willsee space_info->flush is set to 1 and not queue the work. After this,they will block forever on the resulting ticket, as it is now impossibleto kick the worker again.I also confirmed by looking at the assembly of the affected kernel thatit is doing RMW operations. For example, to set the flush (3rd) bit to 0,the assembly is: andb $0xfb,0x60(%rbx)and similarly for setting the full (1st) bit to 0: andb $0xfe,-0x20(%rax)So I think this is really a bug on practical systems. I have observeda number of systems in this exact state, but am currently unable toreproduce it.Rather than leaving this footgun lying around for the future, takeadvantage of the fact that there is room in the struct anyway, and thatit is already quite large and simply change the three bitfield members tobools. This avoids writes to space_info->full having any effect on---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Check skb->transport_header is set in bpf_skb_check_mtuThe bpf_skb_check_mtu helper needs to use skb->transport_header whenthe BPF_MTU_CHK_SEGS flag is used: bpf_skb_check_mtu(skb, ifindex, &mtu_len, 0, BPF_MTU_CHK_SEGS)The transport_header is not always set. There is a WARN_ON_ONCEreport when CONFIG_DEBUG_NET is enabled + skb->gso_size is set +bpf_prog_test_run is used:WARNING: CPU: 1 PID: 2216 at ./include/linux/skbuff.h:3071 skb_gso_validate_network_len bpf_skb_check_mtu bpf_prog_3920e25740a41171_tc_chk_segs_flag # A test in the next patch bpf_test_run bpf_prog_test_run_skbFor a normal ingress skb (not test_run), skb_reset_transport_headeris performed but there is plan to avoid setting it as described incommit 2170a1f09148 ("net: no longer reset transport_header in __netif_receive_skb_core()").This patch fixes the bpf helper by checkingskb_transport_header_was_set(). The check is done just beforeskb->transport_header is used, to avoid breaking the existing bpf prog.The WARN_ON_ONCE is limited to bpf_prog_test_run, so targeting bpf-next.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: relax BUG() to ocfs2_error() in __ocfs2_move_extent()In '__ocfs2_move_extent()', relax 'BUG()' to 'ocfs2_error()' justto avoid crashing the whole kernel due to a filesystem corruption.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: Initialize allocated memory before useKMSAN reports: Multiple uninitialized values detected:- KMSAN: uninit-value in ntfs_read_hdr (3)- KMSAN: uninit-value in bcmp (3)Memory is allocated by __getname(), which is a wrapper forkmem_cache_alloc(). This memory is used before being properlycleared. Change kmem_cache_alloc() to kmem_cache_zalloc() toproperly allocate and clear memory before use.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nbd: defer config unlock in nbd_genl_connectThere is one use-after-free warning when running NBD_CMD_CONNECT andNBD_CLEAR_SOCK:nbd_genl_connect nbd_alloc_and_init_config // config_refs=1 nbd_start_device // config_refs=2 set NBD_RT_HAS_CONFIG_REF open nbd // config_refs=3 recv_work done // config_refs=2 NBD_CLEAR_SOCK // config_refs=1 close nbd // config_refs=0 refcount_inc -> uaf------------[ cut here ]------------refcount_t: addition on 0; use-after-free.WARNING: CPU: 24 PID: 1014 at lib/refcount.c:25 refcount_warn_saturate+0x12e/0x290 nbd_genl_connect+0x16d0/0x1ab0 genl_family_rcv_msg_doit+0x1f3/0x310 genl_rcv_msg+0x44a/0x790The issue can be easily reproduced by adding a small delay beforerefcount_inc(&nbd->config_refs) in nbd_genl_connect(): mutex_unlock(&nbd->config_lock); if (!ret) { set_bit(NBD_RT_HAS_CONFIG_REF, &config->runtime_flags);+ printk("before sleep\n");+ mdelay(5 * 1000);+ printk("after sleep\n"); refcount_inc(&nbd->config_refs); nbd_connect_reply(info, nbd->index); }
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:macintosh/mac_hid: fix race condition in mac_hid_toggle_emumouseThe following warning appears when running syzkaller, and this issue alsoexists in the mainline code. ------------[ cut here ]------------ list_add double add: new=ffffffffa57eee28, prev=ffffffffa57eee28, next=ffffffffa5e63100. WARNING: CPU: 0 PID: 1491 at lib/list_debug.c:35 __list_add_valid_or_report+0xf7/0x130 Modules linked in: CPU: 0 PID: 1491 Comm: syz.1.28 Not tainted 6.6.0+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__list_add_valid_or_report+0xf7/0x130 RSP: 0018:ff1100010dfb7b78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa57eee18 RCX: ffffffff97fc9817 RDX: 0000000000040000 RSI: ffa0000002383000 RDI: 0000000000000001 RBP: ffffffffa57eee28 R08: 0000000000000001 R09: ffe21c0021bf6f2c R10: 0000000000000001 R11: 6464615f7473696c R12: ffffffffa5e63100 R13: ffffffffa57eee28 R14: ffffffffa57eee28 R15: ff1100010dfb7d48 FS: 00007fb14398b640(0000) GS:ff11000119600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010d096005 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 80000000 Call Trace: input_register_handler+0xb3/0x210 mac_hid_start_emulation+0x1c5/0x290 mac_hid_toggle_emumouse+0x20a/0x240 proc_sys_call_handler+0x4c2/0x6e0 new_sync_write+0x1b1/0x2d0 vfs_write+0x709/0x950 ksys_write+0x12a/0x250 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x78/0xe2The WARNING occurs when two processes concurrently write to the mac-hidemulation sysctl, causing a race condition in mac_hid_toggle_emumouse().Both processes read old_val=0, then both try to register the input handler,leading to a double list_add of the same handler. CPU0 CPU1 ------------------------- ------------------------- vfs_write() //write 1 vfs_write() //write 1 proc_sys_write() proc_sys_write() mac_hid_toggle_emumouse() mac_hid_toggle_emumouse() old_val = *valp // old_val=0 old_val = *valp // old_val=0 mutex_lock_killable() proc_dointvec() // *valp=1 mac_hid_start_emulation() input_register_handler() mutex_unlock() mutex_lock_killable() proc_dointvec() mac_hid_start_emulation() input_register_handler() //Trigger Warning mutex_unlock()Fix this by moving the old_val read inside the mutex lock region.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: smartpqi: Fix device resources accessed after device removalCorrect possible race conditions during device removal.Previously, a scheduled work item to reset a LUN could still executeafter the device was removed, leading to use-after-free and otherresource access issues.This race condition occurs because the abort handler may schedule a LUNreset concurrently with device removal via sdev_destroy(), leading touse-after-free and improper access to freed resources. - Check in the device reset handler if the device is still present in the controller's SCSI device list before running; if not, the reset is skipped. - Cancel any pending TMF work that has not started in sdev_destroy(). - Ensure device freeing in sdev_destroy() is done while holding the LUN reset mutex to avoid races with ongoing resets.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nbd: defer config put in recv_workThere is one uaf issue in recv_work when running NBD_CLEAR_SOCK andNBD_CMD_RECONFIGURE: nbd_genl_connect // conf_ref=2 (connect and recv_work A) nbd_open // conf_ref=3 recv_work A done // conf_ref=2 NBD_CLEAR_SOCK // conf_ref=1 nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B) close nbd // conf_ref=1 recv_work B config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAFOr only running NBD_CLEAR_SOCK: nbd_genl_connect // conf_ref=2 nbd_open // conf_ref=3 NBD_CLEAR_SOCK // conf_ref=2 close nbd nbd_release config_put // conf_ref=1 recv_work config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAFCommit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying thewaiter") moved nbd_config_put() to run before waking up the waiter inrecv_work, in order to ensure that nbd_start_device_ioctl() would notbe woken up while nbd->task_recv was still uncleared.However, in nbd_start_device_ioctl(), after being woken up it explicitlycalls flush_workqueue() to make sure all current works are finished.Therefore, there is no need to move the config put ahead of the wakeup.Move nbd_config_put() to the end of recv_work, so that the reference isheld for the whole lifetime of the worker thread. This makes sure theconfig cannot be freed while recv_work is still running, even if clear+ reconfigure interleave.In addition, we don't need to worry about recv_work dropping the lastnbd_put (which causes deadlock):path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=1 (trigger recv_work) open nbd // nbd_refs=2 NBD_CLEAR_SOCK close nbd nbd_release nbd_disconnect_and_put flush_workqueue // recv_work done nbd_config_put nbd_put // nbd_refs=1 nbd_put // nbd_refs=0 queue_workpath B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=2 (trigger recv_work) open nbd // nbd_refs=3 NBD_CLEAR_SOCK // conf_refs=2 close nbd nbd_release nbd_config_put // conf_refs=1 nbd_put // nbd_refs=2 recv_work done // conf_refs=0, nbd_refs=1 rmmod // nbd_refs=0Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put")
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md: fix rcu protection in md_wakeup_threadWe attempted to use RCU to protect the pointer 'thread', but directlypassed the value when calling md_wakeup_thread(). This means that theRCU pointer has been acquired before rcu_read_lock(), which rendersrcu_read_lock() ineffective and could lead to a use-after-free.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix stackmap overflow check in __bpf_get_stackid()Syzkaller reported a KASAN slab-out-of-bounds write in __bpf_get_stackid()when copying stack trace data. The issue occurs when the perf trace contains more stack entries than the stack map bucket can hold, leading to an out-of-bounds write in the bucket's data array.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Fix null deref on srq->rq.queue after resize failureA NULL pointer dereference can occur in rxe_srq_chk_attr() whenibv_modify_srq() is invoked twice in succession under certain errorconditions. The first call may fail in rxe_queue_resize(), which leadsrxe_srq_from_attr() to set srq->rq.queue = NULL. The second call thentriggers a crash (null deref) when accessingsrq->rq.queue->buf->index_mask.Call Trace:rxe_modify_srq+0x170/0x480 [rdma_rxe]? __pfx_rxe_modify_srq+0x10/0x10 [rdma_rxe]? uverbs_try_lock_object+0x4f/0xa0 [ib_uverbs]? rdma_lookup_get_uobject+0x1f0/0x380 [ib_uverbs]ib_uverbs_modify_srq+0x204/0x290 [ib_uverbs]? __pfx_ib_uverbs_modify_srq+0x10/0x10 [ib_uverbs]? tryinc_node_nr_active+0xe6/0x150? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs]ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2c0/0x470 [ib_uverbs]? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs]ib_uverbs_run_method+0x55a/0x6e0 [ib_uverbs]? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]ib_uverbs_cmd_verbs+0x54d/0x800 [ib_uverbs]? __pfx_ib_uverbs_cmd_verbs+0x10/0x10 [ib_uverbs]? __pfx___raw_spin_lock_irqsave+0x10/0x10? __pfx_do_vfs_ioctl+0x10/0x10? ioctl_has_perm.constprop.0.isra.0+0x2c7/0x4c0? __pfx_ioctl_has_perm.constprop.0.isra.0+0x10/0x10ib_uverbs_ioctl+0x13e/0x220 [ib_uverbs]? __pfx_ib_uverbs_ioctl+0x10/0x10 [ib_uverbs]__x64_sys_ioctl+0x138/0x1c0do_syscall_64+0x82/0x250? fdget_pos+0x58/0x4c0? ksys_write+0xf3/0x1c0? __pfx_ksys_write+0x10/0x10? do_syscall_64+0xc8/0x250? __pfx_vm_mmap_pgoff+0x10/0x10? fget+0x173/0x230? fput+0x2a/0x80? ksys_mmap_pgoff+0x224/0x4c0? do_syscall_64+0xc8/0x250? do_user_addr_fault+0x37b/0xfe0? clear_bhb_loop+0x50/0xa0? clear_bhb_loop+0x50/0xa0? clear_bhb_loop+0x50/0xa0entry_SYSCALL_64_after_hwframe+0x76/0x7e
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Do not let BPF test infra emit invalid GSO types to stackYinhao et al. reported that their fuzzer tool was able to trigger askb_warn_bad_offload() from netif_skb_features() -> gso_features_check().When a BPF program - triggered via BPF test infra - pushes the packetto the loopback device via bpf_clone_redirect() then mentioned offloadwarning can be seen. GSO-related features are then rightfully disabled.We get into this situation due to convert___skb_to_skb() settinggso_segs and gso_size but not gso_type. Technically, it makes sensethat this warning triggers since the GSO properties are malformed dueto the gso_type. Potentially, the gso_type could be marked non-trustworthythrough setting it at least to SKB_GSO_DODGY without any other specificassumptions, but that also feels wrong given we should not go furtherinto the GSO engine in the first place.The checks were added in 121d57af308d ("gso: validate gso_type in GSOhandlers") because there were malicious (syzbot) senders that combinea protocol with a non-matching gso_type. If we would want to drop suchpackets, gso_features_check() currently only returns feature flags vianetif_skb_features(), so one location for potentially dropping such skbscould be validate_xmit_unreadable_skb(), but then otoh it would bean additional check in the fast-path for a very corner case. Givenbpf_clone_redirect() is the only place where BPF test infra could emitsuch packets, lets reject them right there.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ntfs3: Fix uninit buffer allocated by __getname()Fix uninit errors caused after buffer allocation given to 'de'; byinitializing the buffer with zeroes. The fix was found by using KMSAN.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ntfs3: fix uninit memory after failed mi_read in mi_format_newFix a KMSAN un-init bug found by syzkaller.ntfs_get_bh() expects a buffer from sb_getblk(), that buffer may not beuptodate. We do not bring the buffer uptodate before setting it asuptodate. If the buffer were to not be uptodate, it could mean adding abuffer with un-init data to the mi record. Attempting to load that recordwill trigger KMSAN.Avoid this by setting the buffer as uptodate, if it's not already, byoverwriting it.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smack: fix bug: unprivileged task can create labelsIf an unprivileged task is allowed to relabel itself(/smack/relabel-self is not empty),it can freely create new labels by writing theirnames into own /proc/PID/attr/smack/currentThis occurs because do_setattr() importsthe provided label in advance,before checking "relabel-self" list.This change ensures that the "relabel-self" listis checked before importing the label.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: fix kernel BUG in ocfs2_find_victim_chainsyzbot reported a kernel BUG in ocfs2_find_victim_chain() because the`cl_next_free_rec` field of the allocation chain list (next free slot inthe chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec)condition in ocfs2_find_victim_chain() and panicking the kernel.To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(),just before calling ocfs2_find_victim_chain(), the code block in it beingexecuted when either of the following conditions is true:1. `cl_next_free_rec` is equal to 0, indicating that there are no freechains in the allocation chain list2. `cl_next_free_rec` is greater than `cl_count` (the total number ofchains in the allocation chain list)Either of them being true is indicative of the fact that there are nochains left for usage.This is addressed using ocfs2_error(), which printsthe error log for debugging purposes, rather than panicking the kernel.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: fsl-cpm: Check length parity before switching to 16 bit modeCommit fc96ec826bce ("spi: fsl-cpm: Use 16 bit mode for large transferswith even size") failed to make sure that the size is really evenbefore switching to 16 bit mode. Until recently the problem wentunnoticed because kernfs uses a pre-allocated bounce buffer of sizePAGE_SIZE for reading EEPROM.But commit 8ad6249c51d0 ("eeprom: at25: convert to spi-mem API")introduced an additional dynamically allocated bounce buffer whose sizeis exactly the size of the transfer, leading to a buffer overrun inthe fsl-cpm driver when that size is odd.Add the missing length parity verification and remain in 8 bit modewhen the length is not even.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sched/deadline: only set free_cpus for online runqueuesCommit 16b269436b72 ("sched/deadline: Modify cpudl::free_cpusto reflect rd->online") introduced the cpudl_set/clear_freecpufunctions to allow the cpu_dl::free_cpus mask to be manipulatedby the deadline scheduler class rq_on/offline callbacks so themask would also reflect this state.Commit 9659e1eeee28 ("sched/deadline: Remove cpu_active_maskfrom cpudl_find()") removed the check of the cpu_active_mask tosave some processing on the premise that the cpudl::free_cpusmask already reflected the runqueue online state.Unfortunately, there are cases where it is possible for thecpudl_clear function to set the free_cpus bit for a CPU when thedeadline runqueue is offline. When this occurs while a CPU isconnected to the default root domain the flag may retain the badstate after the CPU has been unplugged. Later, a different CPUthat is transitioning through the default root domain may push adeadline task to the powered down CPU when cpudl_find sees itsfree_cpus bit is set. If this happens the task will not have theopportunity to run.One example is outlined here:https://lore.kernel.org/lkml/20250110233010.2339521-1-opendmb@gmail.comAnother occurs when the last deadline task is migrated from aCPU that has an offlined runqueue. The dequeue_task member ofthe deadline scheduler class will eventually call cpudl_clearand set the free_cpus bit for the CPU.This commit modifies the cpudl_clear function to be aware of theonline state of the deadline runqueue so that the free_cpus maskcan be updated appropriately.It is no longer necessary to manage the mask outside of thecpudl_set/clear functions so the cpudl_set/clear_freecpufunctions are removed. In addition, since the free_cpus mask isnow only updated under the cpudl lock the code was changed touse the non-atomic __cpumask functions.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: Reset t_task_cdb pointer in error caseIf allocation of cmd->t_task_cdb fails, it remains NULL but is laterdereferenced in the 'err' path.In case of error, reset NULL t_task_cdb value to point at the defaultfixed-size buffer.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-mixer: us16x08: validate meter packet indicesget_meter_levels_from_urb() parses the 64-byte meter packets sent bythe device and fills the per-channel arrays meter_level[],comp_level[] and master_level[] in struct snd_us16x08_meter_store.Currently the function derives the channel index directly from themeter packet (MUB2(meter_urb, s) - 1) and uses it to index thosearrays without validating the range. If the packet contains anegative or out-of-range channel number, the driver may write pastthe end of these arrays.Introduce a local channel variable and validate it before updating thearrays. We reject negative indices, limit meter_level[] andcomp_level[] to SND_US16X08_MAX_CHANNELS, and guard master_level[]updates with ARRAY_SIZE(master_level).
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:char: applicom: fix NULL pointer dereference in ac_ioctlDiscovered by Atuin - Automated Vulnerability Discovery Engine.In ac_ioctl, the validation of IndexCard and the check for a validRamIO pointer are skipped when cmd is 6. However, the functionunconditionally executes readb(apbs[IndexCard].RamIO + VERS) at theend.If cmd is 6, IndexCard may reference a board that does not exist(where RamIO is NULL), leading to a NULL pointer dereference.Fix this by skipping the readb access when cmd is 6, as thiscommand is a global information query and does not target a specificboard context.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslotReject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that wasinitially created with a guest_memfd binding, as KVM doesn't supporttoggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enablingKVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag.Failure to reject the new memslot results in a use-after-free due to KVMnot unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLYchange is easy enough, and can/will be done as a hardening measure (inanticipation of KVM supporting dirty logging on guest_memfd at some point),but fixing the use-after-free would only address the immediate symptom. ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm] Write of size 8 at addr ffff8881111ae908 by task repro/745 CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5c0 kasan_report+0xb4/0xe0 kvm_gmem_release+0x362/0x400 [kvm] __fput+0x2fa/0x9d0 task_work_run+0x12c/0x200 do_exit+0x6ae/0x2100 do_group_exit+0xa8/0x230 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0x737/0x740 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f581f2eac31 Allocated by task 745 on cpu 6 at 9.746971s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_kmalloc+0x77/0x90 kvm_set_memory_region.part.0+0x652/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 745 on cpu 6 at 9.747467s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x3b/0x60 kfree+0xf5/0x440 kvm_set_memslot+0x3c2/0x1160 [kvm] kvm_set_memory_region.part.0+0x86a/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring: fix filename leak in __io_openat_prep() __io_openat_prep() allocates a struct filename using getname(). However,for the condition of the file being installed in the fixed file table aswell as having O_CLOEXEC flag set, the function returns early. At thatpoint, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this,the memory for the newly allocated struct filename is not cleaned up,causing a memory leak.Fix this by setting the REQ_F_NEED_CLEANUP for the request just after thesuccessful getname() call, so that when the request is torn down, thefilename will be cleaned up, along with other resources needing cleanup.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: ets: Remove drr class from the active list if it changes to strictWhenever a user issues an ets qdisc change command, transforming adrr class into a strict one, the ets code isn't checking whether thatclass was in the active list and removing it. This means that, if auser changes a strict class (which was in the active list) back to a drrone, that class will be added twice to the active list [1].Doing so with the following commands:tc qdisc add dev lo root handle 1: ets bands 2 strict 1tc qdisc add dev lo parent 1:2 handle 20: \ tbf rate 8bit burst 100b latency 1stc filter add dev lo parent 1: basic classid 1:2ping -c1 -W0.01 -s 56 127.0.0.1tc qdisc change dev lo root handle 1: ets bands 2 strict 2tc qdisc change dev lo root handle 1: ets bands 2 strict 1ping -c1 -W0.01 -s 56 127.0.0.1Will trigger the following splat with list debug turned on:[ 59.279014][ T365] ------------[ cut here ]------------[ 59.279452][ T365] list_add double add: new=ffff88801d60e350, prev=ffff88801d60e350, next=ffff88801d60e2c0.[ 59.280153][ T365] WARNING: CPU: 3 PID: 365 at lib/list_debug.c:35 __list_add_valid_or_report+0x17f/0x220[ 59.280860][ T365] Modules linked in:[ 59.281165][ T365] CPU: 3 UID: 0 PID: 365 Comm: tc Not tainted 6.18.0-rc7-00105-g7e9f13163c13-dirty #239 PREEMPT(voluntary)[ 59.281977][ T365] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011[ 59.282391][ T365] RIP: 0010:__list_add_valid_or_report+0x17f/0x220[ 59.282842][ T365] Code: 89 c6 e8 d4 b7 0d ff 90 0f 0b 90 90 31 c0 e9 31 ff ff ff 90 48 c7 c7 e0 a0 22 9f 48 89 f2 48 89 c1 4c 89 c6 e8 b2 b7 0d ff 90 <0f> 0b 90 90 31 c0 e9 0f ff ff ff 48 89 f7 48 89 44 24 10 4c 89 44...[ 59.288812][ T365] Call Trace:[ 59.289056][ T365] [ 59.289224][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.289546][ T365] ets_qdisc_change+0xd2b/0x1e80[ 59.289891][ T365] ? __lock_acquire+0x7e7/0x1be0[ 59.290223][ T365] ? __pfx_ets_qdisc_change+0x10/0x10[ 59.290546][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.290898][ T365] ? __mutex_trylock_common+0xda/0x240[ 59.291228][ T365] ? __pfx___mutex_trylock_common+0x10/0x10[ 59.291655][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.291993][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.292313][ T365] ? trace_contention_end+0xc8/0x110[ 59.292656][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.293022][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.293351][ T365] tc_modify_qdisc+0x63a/0x1cf0Fix this by always checking and removing an ets class from the active listwhen changing it to strict.[1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/tree/net/sched/sch_ets.c?id=ce052b9402e461a9aded599f5b47e76bc727f7de#n663
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: fw_tracer, Validate format string parametersAdd validation for format string parameters in the firmware tracer toprevent potential security vulnerabilities and crashes from malformedformat strings received from firmware.The firmware tracer receives format strings from the device firmware anduses them to format trace messages. Without proper validation, badfirmware could provide format strings with invalid format specifiers(e.g., %s, %p, %n) that could lead to crashes, or other undefinedbehavior.Add mlx5_tracer_validate_params() to validate that all format specifiersin trace strings are limited to safe integer/hex formats (%x, %d, %i,%u, %llx, %lx, etc.). Reject strings containing other format types thatcould be used to access arbitrary memory or cause crashes.Invalid format strings are added to the trace output for visibility with"BAD_FORMAT: " prefix.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path"This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9.The commit being reverted added code to __qla2x00_abort_all_cmds() tocall sp->done() without holding a spinlock. But unlike the older codebelow it, this new code failed to check sp->cmd_type and just assumedTYPE_SRB, which results in a jump to an invalid pointer in target-modewith TYPE_TGT_CMD:qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79bqla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h.qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no bufferqla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurredqla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda.BUG: kernel NULL pointer dereference, address: 0000000000000000PF: supervisor instruction fetch in kernel modePF: error_code(0x0010) - not-present pagePGD 0 P4D 0Oops: 0010 [#1] SMPCPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023RIP: 0010:0x0Code: Unable to access opcode bytes at 0xffffffffffffffd6.RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early withinlock") added the spinlock back, because not having the lock caused arace and a crash. But qla2x00_abort_srb() in the switch below alreadychecks for qla2x00_chip_is_down() and handles it the same way, so thecode above the switch is now redundant and still buggy in target-mode.Remove it.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: alps - fix use-after-free bugs caused by dev3_register_workThe dev3_register_work delayed work item is initialized withinalps_reconnect() and scheduled upon receipt of the first barePS/2 packet from an external PS/2 device connected to the ALPStouchpad. During device detachment, the original implementationcalls flush_workqueue() in psmouse_disconnect() to ensurecompletion of dev3_register_work. However, the flush_workqueue()in psmouse_disconnect() only blocks and waits for work items thatwere already queued to the workqueue prior to its invocation. Anywork items submitted after flush_workqueue() is called are notincluded in the set of tasks that the flush operation awaits.This means that after flush_workqueue() has finished executing,the dev3_register_work could still be scheduled. Although thepsmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(),the scheduling of dev3_register_work remains unaffected.The race condition can occur as follows:CPU 0 (cleanup path) | CPU 1 (delayed work)psmouse_disconnect() | psmouse_set_state() | flush_workqueue() | alps_report_bare_ps2_packet() alps_disconnect() | psmouse_queue_work() kfree(priv); // FREE | alps_register_bare_ps2_mouse() | priv = container_of(work...); // USE | priv->dev3 // USEAdd disable_delayed_work_sync() in alps_disconnect() to ensurethat dev3_register_work is properly canceled and prevented fromexecuting after the alps_data structure has been deallocated.This bug is identified by static analysis.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: An issue was discovered in Binutils before 2.46. The objdump contains a denial-of-service vulnerability when processing a crafted binary with malformed debug information. A logic flaw in the handling of DWARF location list headers can cause objdump to enter an unbounded loop and produce endless output until manually interrupted. This issue affects versions prior to the upstream fix and allows a local attacker to cause excessive resource consumption by supplying a malicious input file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: Binutils objdump contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF debug_rnglists data. A logic error in the handling of the debug_rnglists header can cause objdump to repeatedly print the same warning message and fail to terminate, resulting in an unbounded logging loop until the process is interrupted. The issue was observed in binutils 2.44. A local attacker can exploit this vulnerability by supplying a malicious input file, leading to excessive CPU and I/O usage and preventing completion of the objdump analysis.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: GNU Binutils thru 2.45.1 readelf contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF loclists data. A logic flaw in the DWARF parsing code can cause readelf to repeatedly print the same table output without making forward progress, resulting in an unbounded output loop that never terminates unless externally interrupted. A local attacker can trigger this behavior by supplying a malicious input file, causing excessive CPU and I/O usage and preventing readelf from completing its analysis.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: GNU Binutils thru 2.45.1 readelf contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF .debug_rnglists data. A logic flaw in the DWARF parsing path causes readelf to repeatedly print the same warning message without making forward progress, resulting in a non-terminating output loop that requires manual interruption. No evidence of memory corruption or code execution was observed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: hns3: using the num_tqps in the vf driver to apply for resourcesCurrently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqpis allocated using kinfo->num_tqps. However, kinfo->num_tqps is set tomin(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smallerthan hdev->num_tqps, which causes some hdev->htqp[i] to remainuninitialized in hclgevf_knic_setup().Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,ensuring that the lengths of hdev->htqp and kinfo->tqp are consistentand that all elements are properly initialized.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:svcrdma: bound check rq_pages index in inline pathsvc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] withoutverifying rc_curpage stays within the allocated page array. Add guardsbefore the first use and after advancing to a new page.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:functionfs: fix the open/removal racesffs_epfile_open() can race with removal, ending up with file->private_datapointing to freed object.There is a total count of opened files on functionfs (both ep0 anddynamic ones) and when it hits zero, dynamic files get removed.Unfortunately, that removal can happen while another thread isin ffs_epfile_open(), but has not incremented the count yet.In that case open will succeed, leaving us with UAF on any subsequentread() or write().The root cause is that ffs->opened is misused; atomic_dec_and_test() vs.atomic_add_return() is not a good idea, when object remains visible allalong.To untangle that * serialize openers on ffs->mutex (both for ep0 and for dynamic files) * have dynamic ones use atomic_inc_not_zero() and fail if we hadzero ->opened; in that case the file we are opening is doomed. * have the inodes of dynamic files marked on removal (from thecallback of simple_recursive_removal()) - clear ->i_private there. * have open of dynamic ones verify they hadn't been already removed,along with checking that state is FFS_ACTIVE.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: aic94xx: fix use-after-free in device removal pathThe asd_pci_remove() function fails to synchronize with pending taskletsbefore freeing the asd_ha structure, leading to a potentialuse-after-free vulnerability.When a device removal is triggered (via hot-unplug or module unload),race condition can occur.The fix adds tasklet_kill() before freeing the asd_ha structure,ensuring all scheduled tasklets complete before cleanup proceeds.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btusb: revert use of devm_kzalloc in btusbThis reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc inbtusb.c file").In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. Thisties the lifetime of all the btusb data to the binding of a driver toone interface, INTF. In a driver that binds to other interfaces, ISOCand DIAG, this is an accident waiting to happen.The issue is revealed in btusb_disconnect(), where callingusb_driver_release_interface(&btusb_driver, data->intf) will have devmfree the data that is also being used by the other interfaces of thedriver that may not be released yet.To fix this, revert the use of devm and go back to freeing memoryexplicitly.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: ucsi: Handle incorrect num_connectors capabilityThe UCSI spec states that the num_connectors field is 7 bits, and the8th bit is reserved and should be set to zero.Some buggy FW has been known to set this bit, and it can lead to asystem not booting.Flag that the FW is not behaving correctly, and auto-fix the valueso that the system boots correctly.Found on Lenovo P1 G8 during Linux enablement program. The FW willbe fixed, but seemed worth addressing in case it hit platforms thataren't officially Linux supported.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ACPICA: Avoid walking the Namespace if start_node is NULLAlthough commit 0c9992315e73 ("ACPICA: Avoid walking the ACPI Namespaceif it is not there") fixed the situation when both start_node andacpi_gbl_root_node are NULL, the Linux kernel mainline now still crashedon Honor Magicbook 14 Pro [1].That happens due to the access to the member of parent_node inacpi_ns_get_next_node(). The NULL pointer dereference will alwayshappen, no matter whether or not the start_node is equal toACPI_ROOT_OBJECT, so move the check of start_node being NULLout of the if block.Unfortunately, all the attempts to contact Honor have failed, theyrefused to provide any technical support for Linux.The bad DSDT table's dump could be found on GitHub [2].DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025[ rjw: Subject adjustment, changelog edits ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: avoid deadlock on fallback while reinjectingJakub reported an MPTCP deadlock at fallback time: WARNING: possible recursive locking detected 6.18.0-rc7-virtme #1 Not tainted -------------------------------------------- mptcp_connect/20858 is trying to acquire lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_try_fallback+0xd8/0x280 but task is already holding lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&msk->fallback_lock); lock(&msk->fallback_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mptcp_connect/20858: #0: ff1100001da18290 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x114/0x1bc0 #1: ff1100001db40fd0 (k-sk_lock-AF_INET#2){+.+.}-{0:0}, at: __mptcp_retrans+0x2cb/0xaa0 #2: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 stack backtrace: CPU: 0 UID: 0 PID: 20858 Comm: mptcp_connect Not tainted 6.18.0-rc7-virtme #1 PREEMPT(full) Hardware name: Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack_lvl+0x6f/0xa0 print_deadlock_bug.cold+0xc0/0xcd validate_chain+0x2ff/0x5f0 __lock_acquire+0x34c/0x740 lock_acquire.part.0+0xbc/0x260 _raw_spin_lock_bh+0x38/0x50 __mptcp_try_fallback+0xd8/0x280 mptcp_sendmsg_frag+0x16c2/0x3050 __mptcp_retrans+0x421/0xaa0 mptcp_release_cb+0x5aa/0xa70 release_sock+0xab/0x1d0 mptcp_sendmsg+0xd5b/0x1bc0 sock_write_iter+0x281/0x4d0 new_sync_write+0x3c5/0x6f0 vfs_write+0x65e/0xbb0 ksys_write+0x17e/0x200 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fa5627cbc5e Code: 4d 89 d8 e8 14 bd 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff1fe14700 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa5627cbc5e RDX: 0000000000001f9c RSI: 00007fff1fe16984 RDI: 0000000000000005 RBP: 00007fff1fe14710 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff1fe16920 R13: 0000000000002000 R14: 0000000000001f9c R15: 0000000000001f9cThe packet scheduler could attempt a reinjection after receiving anMP_FAIL and before the infinite map has been transmitted, causing adeadlock since MPTCP needs to do the reinjection atomically from WRTfallback.Address the issue explicitly avoiding the reinjection in the criticalscenario. Note that this is the only fallback critical section thatcould potentially send packets and hit the double-lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: Discard Beacon frames to non-broadcast addressBeacon frames are required to be sent to the broadcast address, see IEEEStd 802.11-2020, 11.1.3.1 ("The Address 1 field of the Beacon .. frameshall be set to the broadcast address"). A unicast Beacon frame might beused as a targeted attack to get one of the associated STAs to dosomething (e.g., using CSA to move it to another channel). As such, itis better have strict filtering for this on the received side anddiscard all Beacon frames that are sent to an unexpected address.This is even more important for cases where beacon protection is used.The current implementation in mac80211 is correctly discarding unicastBeacon frames if the Protected Frame bit in the Frame Control field isset to 0. However, if that bit is set to 1, the logic used for checkingfor configured BIGTK(s) does not actually work. If the driver does nothave logic for dropping unicast Beacon frames with Protected Frame bit1, these frames would be accepted in mac80211 processing as valid Beaconframes even though they are not protected. This would allow beaconprotection to be bypassed. While the logic for checking beaconprotection could be extended to cover this corner case, a more genericcheck for discard all Beacon frames based on A1=unicast address coversthis without needing additional changes.Address all these issues by dropping received Beacon frames if they aresent to a non-broadcast address.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbufferInitialize the eb.vma array with values of 0 when the eb structure isfirst set up. In particular, this sets the eb->vma[i].vma pointers toNULL, simplifying cleanup and getting rid of the bug described below.During the execution of eb_lookup_vmas(), the eb->vma array issuccessively filled up with struct eb_vma objects. This process includescalling eb_add_vma(), which might fail; however, even in the event offailure, eb->vma[i].vma is set for the currently processed buffer.If eb_add_vma() fails, eb_lookup_vmas() returns with an error, whichprompts a call to eb_release_vmas() to clean up the mess. Sinceeb_lookup_vmas() might fail during processing any (possibly not first)buffer, eb_release_vmas() checks whether a buffer's vma is NULL to knowat what point did the lookup function fail.In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helperfunction eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma isset to NULL in case i915_gem_object_userptr_submit_init() fails; thecurrent one needs to be cleaned up by eb_release_vmas() at this point,so the next one is set. If eb_add_vma() fails, neither the current northe next vma is set to NULL, which is a source of a NULL deref bugdescribed in the issue linked in the Closes tag.When entering eb_lookup_vmas(), the vma pointers are set to the slabpoison value, instead of NULL. This doesn't matter for the actuallookup, since it gets overwritten anyway, however the eb_release_vmas()function only recognizes NULL as the stopping value, hence the pointersare being set to NULL as they go in case of intermediate failure. Thispatch changes the approach to filling them all with NULL at the startinstead, rather than handling that manually during failure.(cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: seqiv - Do not use req->iv after crypto_aead_encryptAs soon as crypto_aead_encrypt is called, the underlying requestmay be freed by an asynchronous completion. Thus dereferencingreq->iv after it returns is invalid.Instead of checking req->iv against info, create a new variableunaligned_info and use it for that purpose instead.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smc91x: fix broken irq-context in PREEMPT_RTWhen smc91x.c is built with PREEMPT_RT, the following splat occursin FVP_RevC:[ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000[ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106][ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work[ 13.062266] C** replaying previous printk message **[ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)}[ 13.062353] Hardware name: , BIOS[ 13.062382] Workqueue: mld mld_ifc_work[ 13.062469] Call trace:[ 13.062494] show_stack+0x24/0x40 (C)[ 13.062602] __dump_stack+0x28/0x48[ 13.062710] dump_stack_lvl+0x7c/0xb0[ 13.062818] dump_stack+0x18/0x34[ 13.062926] process_scheduled_works+0x294/0x450[ 13.063043] worker_thread+0x260/0x3d8[ 13.063124] kthread+0x1c4/0x228[ 13.063235] ret_from_fork+0x10/0x20This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT,but smc_special_unlock() does not restore IRQs on PREEMPT_RT.The reason is that smc_special_unlock() calls spin_unlock_irqrestore(),and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invokercu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero.To address this issue, replace smc_special_trylock() with spin_trylock_irqsave().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/irdma: avoid invalid read in irdma_net_eventirdma_net_event() should not dereference anything from "neigh" (alias"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.Other events come with different structures pointed to by "ptr" and theymay be smaller than struct neighbour.Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.The bug is mostly harmless, but it triggers KASAN on debug kernels: BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma] Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554 CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1 Hardware name: [...] Workqueue: events rt6_probe_deferred Call Trace: dump_stack_lvl+0x60/0xb0 print_address_description.constprop.0+0x2c/0x3f0 print_report+0xb4/0x270 kasan_report+0x92/0xc0 irdma_net_event+0x32e/0x3b0 [irdma] notifier_call_chain+0x9e/0x180 atomic_notifier_call_chain+0x5c/0x110 rt6_do_redirect+0xb91/0x1080 tcp_v6_err+0xe9b/0x13e0 icmpv6_notify+0x2b2/0x630 ndisc_redirect_rcv+0x328/0x530 icmpv6_rcv+0xc16/0x1360 ip6_protocol_deliver_rcu+0xb84/0x12e0 ip6_input_finish+0x117/0x240 ip6_input+0xc4/0x370 ipv6_rcv+0x420/0x7d0 __netif_receive_skb_one_core+0x118/0x1b0 process_backlog+0xd1/0x5d0 __napi_poll.constprop.0+0xa3/0x440 net_rx_action+0x78a/0xba0 handle_softirqs+0x2d4/0x9c0 do_softirq+0xad/0xe0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt()The variable mddev->private is first assigned to conf and then checked: conf = mddev->private; if (!conf) ...If conf is NULL, then mddev->private is also NULL. In this case,null-pointer dereferences can occur when calling raid5_quiesce(): raid5_quiesce(mddev, true); raid5_quiesce(mddev, false);since mddev->private is assigned to conf again in raid5_quiesce(), and confis dereferenced in several places, for example: conf->quiesce = 0; wake_up(&conf->wait_for_quiescent);To fix this issue, the function should unlock mddev and return beforeinvoking raid5_quiesce() when conf is NULL, following the existing patternin raid5_change_consistency_policy().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"This patch ensures that the RX ring size (rx_pending) is notset below the permitted length. This avoids UBSANshift-out-of-bounds errors when users passes small or zeroring sizes via ethtool -G.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm/dpu: Add missing NULL pointer check for pingpong interfaceIt is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in asingle place the check is missing.Also use convenient locals instead of phys_enc->* where available.Patchwork: https://patchwork.freedesktop.org/patch/693860/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/tilcdc: Fix removal actions in case of failed probeThe drm_kms_helper_poll_fini() and drm_atomic_helper_shutdown() helpersshould only be called when the device has been successfully registered.Currently, these functions are called unconditionally in tilcdc_fini(),which causes warnings during probe deferral scenarios.[ 7.972317] WARNING: CPU: 0 PID: 23 at drivers/gpu/drm/drm_atomic_state_helper.c:175 drm_atomic_helper_crtc_duplicate_state+0x60/0x68...[ 8.005820] drm_atomic_helper_crtc_duplicate_state from drm_atomic_get_crtc_state+0x68/0x108[ 8.005858] drm_atomic_get_crtc_state from drm_atomic_helper_disable_all+0x90/0x1c8[ 8.005885] drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x90/0x144[ 8.005911] drm_atomic_helper_shutdown from tilcdc_fini+0x68/0xf8 [tilcdc][ 8.005957] tilcdc_fini [tilcdc] from tilcdc_pdev_probe+0xb0/0x6d4 [tilcdc]Fix this by rewriting the failed probe cleanup path using the standardgoto error handling pattern, which ensures that cleanup functions areonly called on successfully initialized resources. Additionally, removethe now-unnecessary is_registered flag.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm-verity: disable recursive forward error correctionThere are two problems with the recursive correction:1. It may cause denial-of-service. In fec_read_bufs, there is a loop thathas 253 iterations. For each iteration, we may call verity_hash_for_blockrecursively. There is a limit of 4 nested recursions - that means thatthere may be at most 253^4 (4 billion) iterations. Red Hat QE teamactually created an image that pushes dm-verity to this limit - and thisimage just makes the udev-worker process get stuck in the 'D' state.2. It doesn't work. In fec_read_bufs we store data into the variable"fio->bufs", but fio bufs is shared between recursive invocations, if"verity_hash_for_block" invoked correction recursively, it wouldoverwrite partially filled fio->bufs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: tegra-adma: Fix use-after-freeA use-after-free bug exists in the Tegra ADMA driver when audio streamsare terminated, particularly during XRUN conditions. The issue occurswhen the DMA buffer is freed by tegra_adma_terminate_all() before thevchan completion tasklet finishes accessing it.The race condition follows this sequence: 1. DMA transfer completes, triggering an interrupt that schedules the completion tasklet (tasklet has not executed yet) 2. Audio playback stops, calling tegra_adma_terminate_all() which frees the DMA buffer memory via kfree() 3. The scheduled tasklet finally executes, calling vchan_complete() which attempts to access the already-freed memorySince tasklets can execute at any time after being scheduled, there isno guarantee that the buffer will remain valid when vchan_complete()runs.Fix this by properly synchronizing the virtual channel completion: - Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the descriptors as terminated instead of freeing the descriptor. - Add the callback tegra_adma_synchronize() that calls vchan_synchronize() which kills any pending tasklets and frees any terminated descriptors.Crash logs:[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0[ 337.427562] Call trace:[ 337.427564] dump_backtrace+0x0/0x320[ 337.427571] show_stack+0x20/0x30[ 337.427575] dump_stack_lvl+0x68/0x84[ 337.427584] print_address_description.constprop.0+0x74/0x2b8[ 337.427590] kasan_report+0x1f4/0x210[ 337.427598] __asan_load8+0xa0/0xd0[ 337.427603] vchan_complete+0x124/0x3b0[ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0[ 337.427617] tasklet_action+0x30/0x40[ 337.427623] __do_softirq+0x1a0/0x5c4[ 337.427628] irq_exit+0x110/0x140[ 337.427633] handle_domain_irq+0xa4/0xe0[ 337.427640] gic_handle_irq+0x64/0x160[ 337.427644] call_on_irq_stack+0x20/0x4c[ 337.427649] do_interrupt_handler+0x7c/0x90[ 337.427654] el1_interrupt+0x30/0x80[ 337.427659] el1h_64_irq_handler+0x18/0x30[ 337.427663] el1h_64_irq+0x7c/0x80[ 337.427667] cpuidle_enter_state+0xe4/0x540[ 337.427674] cpuidle_enter+0x54/0x80[ 337.427679] do_idle+0x2e0/0x380[ 337.427685] cpu_startup_entry+0x2c/0x70[ 337.427690] rest_init+0x114/0x130[ 337.427695] arch_call_rest_init+0x18/0x24[ 337.427702] start_kernel+0x380/0x3b4[ 337.427706] __primary_switched+0xc0/0xc8
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:counter: interrupt-cnt: Drop IRQF_NO_THREAD flagAn IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, asCONFIG_PROVE_RAW_LOCK_NESTING warns:=============================[ BUG: Invalid wait context ]6.18.0-rc1+git... #1-----------------------------some-user-space-process/1251 is trying to lock:(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]other info that might help us debug this:context-{2:2}no locks held by some-user-space-process/....stack backtrace:CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPTCall trace: show_stack (C) dump_stack_lvl dump_stack __lock_acquire lock_acquire _raw_spin_lock_irqsave counter_push_event [counter] interrupt_cnt_isr [interrupt_cnt] __handle_irq_event_percpu handle_irq_event handle_simple_irq handle_irq_desc generic_handle_domain_irq gpio_irq_handler handle_irq_desc generic_handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler el0_interrupt __el0_irq_handler_common el0t_64_irq_handler el0t_64_irq... and Sebastian correctly points out. Remove IRQF_NO_THREAD as analternative to switching to raw_spinlock_t, because the latter would limitall potential nested locks to raw_spinlock_t only.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: always detect conflicting inodes when logging inode refsAfter rename exchanging (either with the rename exchange operation orregular renames in multiple non-atomic steps) two inodes and at leastone of them is a directory, we can end up with a log tree that containsonly of the inodes and after a power failure that can result in an attemptto delete the other inode when it should not because it was not deletedbefore the power failure. In some case that delete attempt fails whenthe target inode is a directory that contains a subvolume inside it, sincethe log replay code is not prepared to deal with directory entries thatpoint to root items (only inode items).1) We have directories "dir1" (inode A) and "dir2" (inode B) under the same parent directory;2) We have a file (inode C) under directory "dir1" (inode A);3) We have a subvolume inside directory "dir2" (inode B);4) All these inodes were persisted in a past transaction and we are currently at transaction N;5) We rename the file (inode C), so at btrfs_log_new_name() we update inode C's last_unlink_trans to N;6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B), so after the exchange "dir1" is inode B and "dir2" is inode A. During the rename exchange we call btrfs_log_new_name() for inodes A and B, but because they are directories, we don't update their last_unlink_trans to N;7) An fsync against the file (inode C) is done, and because its inode has a last_unlink_trans with a value of N we log its parent directory (inode A) (through btrfs_log_all_parents(), called from btrfs_log_inode_parent()).8) So we end up with inode B not logged, which now has the old name of inode A. At copy_inode_items_to_log(), when logging inode A, we did not check if we had any conflicting inode to log because inode A has a generation lower than the current transaction (created in a past transaction);9) After a power failure, when replaying the log tree, since we find that inode A has a new name that conflicts with the name of inode B in the fs tree, we attempt to delete inode B... this is wrong since that directory was never deleted before the power failure, and because there is a subvolume inside that directory, attempting to delete it will fail since replay_dir_deletes() and btrfs_unlink_inode() are not prepared to deal with dir items that point to roots instead of inodes. When that happens the mount fails and we get a stack trace like the following: [87.2314] BTRFS info (device dm-0): start tree-log replay [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259 [87.2332] ------------[ cut here ]------------ [87.2338] BTRFS: Transaction aborted (error -2) [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2368] Modules linked in: btrfs loop dm_thin_pool (...) [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full) [87.2489] Tainted: [W]=WARN [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2538] Code: c0 89 04 24 (...) [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286 [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000 [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840 [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0 [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10 [87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000 [87.---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix NULL dereference on root when tracing inode evictionWhen evicting an inode the first thing we do is to setup tracing for it,which implies fetching the root's id. But in btrfs_evict_inode() theroot might be NULL, as implied in the next check that we do inbtrfs_evict_inode().Hence, we either should set the ->root_objectid to 0 in case the root isNULL, or we move tracing setup after checking that the root is notNULL. Setting the rootid to 0 at least gives us the possibility to tracethis call even in the case when the root is NULL, so that's the solutiontaken here.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: ti: dma-crossbar: fix device leak on am335x route allocationMake sure to drop the reference taken when looking up the crossbarplatform device during am335x route allocation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: xilinx: xdma: Fix regmap max_registerThe max_register field is assigned the size of the register memoryregion instead of the offset of the last register.The result is that reading from the regmap via debugfs can causea segmentation fault:tail /sys/kernel/debug/regmap/xdma.1.auto/registersUnable to handle kernel paging request at virtual address ffff800082f70000Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault[...]Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)---[ end trace 0000000000000000 ]---note: tail[1217] exited with irqs disablednote: tail[1217] exited with preempt_count 1Segmentation fault
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mmc: sdhci-of-dwcmshc: Prevent illegal clock reduction in HS200/HS400 modeWhen operating in HS200 or HS400 timing modes, reducing the clock frequencybelow 52MHz will lead to link broken as the Rockchip DWC MSHC controllerrequires maintaining a minimum clock of 52MHz in these modes.Add a check to prevent illegal clock reduction through debugfs:root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clockroot@debian:/# [ 30.090146] mmc0: running CQE recoverymmc0: cqhci: Failed to haltmmc0: cqhci: spurious TCN for tag 0WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24Modules linked in:CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPTHardware name: Rockchip RK3588 EVB1 V10 Board (DT)Workqueue: kblockd blk_mq_run_work_fnpstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : cqhci_irq+0x254/0x818lr : cqhci_irq+0x254/0x818...
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: don't WARN for connections on invalid channelsIt's not clear (to me) how exactly syzbot managed to hit this,but it seems conceivable that e.g. regulatory changed and hasdisabled a channel between scanning (channel is checked to beusable by cfg80211_get_ies_channel_number) and connecting onthe channel later.With one scenario that isn't covered elsewhere described above,the warning isn't good, replace it with a (more informative)error message.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon()rtw_core_enable_beacon() reads 4 bytes from an address that is not amultiple of 4. This results in a crash on some systems.Do 1 byte reads/writes instead.Unable to handle kernel paging request at virtual address ffff8000827e0522Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment faultData abort info: ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000[ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13Internal error: Oops: 0000000096000021 [#1] SMPModules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...]CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARYTainted: [W]=WARNHardware name: FriendlyElec NanoPC-T6 LTS (DT)Workqueue: phy0 rtw_c2h_work [rtw88_core]pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : rtw_pci_read32+0x18/0x40 [rtw88_pci]lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core]sp : ffff800080cc3ca0x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522Call trace: rtw_pci_read32+0x18/0x40 [rtw88_pci] (P) rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core] rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core] rtw_c2h_work+0x50/0x98 [rtw88_core] process_one_work+0x178/0x3f8 worker_thread+0x208/0x418 kthread+0x120/0x220 ret_from_fork+0x10/0x20Code: d28fe202 8b020000 f9524400 8b214000 (b9400000)---[ end trace 0000000000000000 ]---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Validate sp before freeing associated memorySystem crash with the following signature[154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete[154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3.[154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5.[154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 0080 0000.[154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed - 0078 00a0 0000.[154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).[154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).[154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8[154565.553080] #PF: supervisor read access in kernel mode[154565.553082] #PF: error_code(0x0000) - not-present page[154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0[154565.553089] Oops: 0000 1 PREEMPT SMP PTI[154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1[154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024[154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx][154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b[154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286[154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002[154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47[154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a[154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0[154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000[154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000[154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0[154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400[154565.553159] PKRU: 55555554[154565.553160] Call Trace:[154565.553162] [154565.553165] ? show_trace_log_lvl+0x1c4/0x2df[154565.553172] ? show_trace_log_lvl+0x1c4/0x2df[154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx][154565.553215] ? __die_body.cold+0x8/0xd[154565.553218] ? page_fault_oops+0x134/0x170[154565.553223] ? snprintf+0x49/0x70[154565.553229] ? exc_page_fault+0x62/0x150[154565.553238] ? asm_exc_page_fault+0x22/0x30Check for sp being non NULL before freeing any associated memory
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix reservation leak in some error paths when inserting inline extentIf we fail to allocate a path or join a transaction, we return from__cow_file_range_inline() without freeing the reserved qgroup data,resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()in such cases.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()Simplify the code by using device managed memory allocations.This also fixes a memory leak in rtw_register_hw(). The supported bandswere not freed in the error path.Copied from commit 145df52a8671 ("wifi: rtw89: Convertrtw89_core_set_supported_band to use devm_*").
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rpmsg: core: fix race in driver_override_show() and use core helperThe driver_override_show function reads the driver_override stringwithout holding the device_lock. However, the store function modifiesand frees the string while holding the device_lock. This creates a racecondition where the string can be freed by the store function whilebeing read by the show function, leading to a use-after-free.To fix this, replace the rpmsg_string_attr macro with explicit show andstore functions. The new driver_override_store uses the standarddriver_set_override helper. Since the introduction ofdriver_set_override, the comments in include/linux/rpmsg.h have statedthat this helper must be used to set or clear driver_override, but theimplementation was not updated until now.Because driver_set_override modifies and frees the string while holdingthe device_lock, the new driver_override_show now correctly holds thedevice_lock during the read operation to prevent the race.Additionally, since rpmsg_string_attr has only ever been used fordriver_override, removing the macro simplifies the code.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: Drop the MHI auto_queue feature for IPCR DL channelsMHI stack offers the 'auto_queue' feature, which allows the MHI stack toauto queue the buffers for the RX path (DL channel). Though this featuresimplifies the client driver design, it introduces race between the clientdrivers and the MHI stack. For instance, with auto_queue, the 'dl_callback'for the DL channel may get called before the client driver is fully probed.This means, by the time the dl_callback gets called, the client driver'sstructures might not be initialized, leading to NULL ptr dereference.Currently, the drivers have to workaround this issue by initializing theinternal structures before calling mhi_prepare_for_transfer_autoqueue().But even so, there is a chance that the client driver's internal code pathmay call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() iscalled, leading to similar NULL ptr dereference. This issue has beenreported on the Qcom X1E80100 CRD machines affecting boot.So to properly fix all these races, drop the MHI 'auto_queue' featurealtogether and let the client driver (QRTR) manage the RX buffers manually.In the QRTR driver, queue the RX buffers based on the ring length duringprobe and recycle the buffers in 'dl_callback' once they are consumed. Thisalso warrants removing the setting of 'auto_queue' flag from controllerdrivers.Currently, this 'auto_queue' feature is only enabled for IPCR DL channel.So only the QRTR client driver requires the modification.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controlsThe size of the data behind of scontrol->ipc_control_data for bytescontrols is:[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct[2] sizeof(struct sof_abi_hdr)) + payloadThe max_size specifies the size of [2] and it is coming from topology.Change the function to take this into account and allocate adequate amountof memory behind scontrol->ipc_control_data.With the change we will allocate [1] amount more memory to be able to holdthe full size of data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:memory: mtk-smi: fix device leak on larb probeMake sure to drop the reference taken when looking up the SMI deviceduring larb probe on late probe failure (e.g. probe deferral) and ondriver unbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:memory: mtk-smi: fix device leaks on common probeMake sure to drop the reference taken when looking up the SMI deviceduring common probe on late probe failure (e.g. probe deferral) and ondriver unbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:misc: bcm_vk: Fix possible null-pointer dereferences in bcm_vk_read()In the function bcm_vk_read(), the pointer entry is checked, indicatingthat it can be NULL. If entry is NULL and rc is set to -EMSGSIZE, thefollowing code may cause null-pointer dereferences: struct vk_msg_blk tmp_msg = entry->to_h_msg[0]; set_msg_id(&tmp_msg, entry->usr_msg_id); tmp_msg.size = entry->to_h_blks - 1;To prevent these possible null-pointer dereferences, copy to_h_msg,usr_msg_id, and to_h_blks from iter into temporary variables, and returnthese temporary variables to the application instead of accessing themthrough a potentially NULL entry.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix NULL pointer issue buffer funcsIf SDMA block not enabled, buffer_funcs will not initialize,fix the null pointer issue if buffer_funcs not initialized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: Add missing NULL check for alloc_workqueue()alloc_workqueue() can return NULL on memory allocation failure. Withoutproper error checking, this may lead to a NULL pointer dereference whenqueue_work() is later called with the NULL workqueue pointer inepf_ntb_epc_init().Add a NULL check immediately after alloc_workqueue() and return -ENOMEM onfailure to prevent the driver from loading with an invalid workqueuepointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/vkms: Convert to DRM's vblank timerReplace vkms' vblank timer with the DRM implementation. The DRMcode is identical in concept, but differs in implementation.Vblank timers are covered in vblank helpers and initializer macros,so remove the corresponding hrtimer in struct vkms_output. Thevblank timer calls vkms' custom timeout code via handle_vblank_timeoutin struct drm_crtc_helper_funcs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A use-after-free vulnerability exists in libcurl when an applicationconfigures an HTTP/2 stream-dependency tree via `CURLOPT_STREAM_DEPENDS` or`CURLOPT_STREAM_DEPENDS_E`, subsequently invokes `curl_easy_reset()`, andfinally terminates the handle with `curl_easy_cleanup()`. During this finalcleanup phase, libcurl attempts to access and modify an internal structurethat was already freed during the reset operation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mscc: ocelot: Fix crash when adding interface under a lagCommit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag")fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.The ocelot_set_aggr_pgids() function in the ocelot driver has similar logicand is susceptible to the same crash.This issue specifically affects the ocelot_vsc7514.c frontend, which leavesunused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected asit uses the DSA framework which registers all ports.Fix this by checking if the port pointer is valid before accessing it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfsd: check that server is running in unlock_filesystemIf we are trying to unlock the filesystem via an administrativeinterface and nfsd isn't running, it crashes the server. Thishappens currently because nfsd4_revoke_states() access statestructures (eg., conf_id_hashtbl) that has been freed as a partof the server shutdown.[ 59.465072] Call trace:[ 59.465308] nfsd4_revoke_states+0x1b4/0x898 [nfsd] (P)[ 59.465830] write_unlock_fs+0x258/0x440 [nfsd][ 59.466278] nfsctl_transaction_write+0xb0/0x120 [nfsd][ 59.466780] vfs_write+0x1f0/0x938[ 59.467088] ksys_write+0xfc/0x1f8[ 59.467395] __arm64_sys_write+0x74/0xb8[ 59.467746] invoke_syscall.constprop.0+0xdc/0x1e8[ 59.468177] do_el0_svc+0x154/0x1d8[ 59.468489] el0_svc+0x40/0xe0[ 59.468767] el0t_64_sync_handler+0xa0/0xe8[ 59.469138] el0t_64_sync+0x1ac/0x1b0Ensure this can't happen by taking the nfsd_mutex and checking thatthe server is still up, and then holding the mutex across the call tonfsd4_revoke_states().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: make free_choose_arg_map() resilient to partial allocationfree_choose_arg_map() may dereference a NULL pointer if its caller failsafter a partial allocation.For example, in decode_choose_args(), if allocation of arg_map->argsfails, execution jumps to the fail label and free_choose_arg_map() iscalled. Since arg_map->size is updated to a non-zero value before memoryallocation, free_choose_arg_map() will iterate over arg_map->args anddereference a NULL pointer.To prevent this potential NULL pointer dereference and makefree_choose_arg_map() more resilient, add checks for pointers beforeiterating.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rtsSince j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() iscalled only when the timer is enabled, we need to callj1939_session_deactivate_activate_next() if we cancelled the timer.Otherwise, refcount for j1939_session leaks, which will later appear as| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.problem.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovecCommit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")added ttag bounds checking and data_offsetvalidation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validatewhether the command's data structures (cmd->req.sg and cmd->iov) havebeen properly initialized before processing H2C_DATA PDUs.The nvmet_tcp_build_pdu_iovec() function dereferences these pointerswithout NULL checks. This can be triggered by sending H2C_DATA PDUimmediately after the ICREQ/ICRESP handshake, beforesending a CONNECT command or NVMe write command.Attack vectors that trigger NULL pointer dereferences:1. H2C_DATA PDU sent before CONNECT -> both pointers NULL2. H2C_DATA PDU for READ command -> cmd->req.sg allocated, cmd->iov NULL3. H2C_DATA PDU for uninitialized command slot -> both pointers NULLThe fix validates both cmd->req.sg and cmd->iov before callingnvmet_tcp_build_pdu_iovec(). Both checks are required because:- Uninitialized commands: both NULL- READ commands: cmd->req.sg allocated, cmd->iov NULL- WRITE commands: both allocated
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: tlv320adcx140: fix null pointerThe "snd_soc_component" in "adcx140_priv" was only used once but neverset. It was only used for reaching "dev" which is already present in"adcx140_priv".
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: ip_gre: make ipgre_header() robustAnalog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")Over the years, syzbot found many ways to crash the kernelin ipgre_header() [1].This involves team or bonding drivers ability to dynamicallychange their dev->needed_headroom and/or dev->hard_header_lenIn this particular crash mld_newpack() allocated an skbwith a too small reserve/headroom, and by the time mld_sendpack()was called, syzbot managed to attach an ipgre device.[1]skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 !Oops: invalid opcode: 0000 [#1] SMP KASAN PTICPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213Call Trace: skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:idpf: fix error handling in the init_task on loadIf the init_task fails during a driver load, we end up without vports andnetdevs, effectively failing the entire process. In that state asubsequent reset will result in a crash as the service task attempts toaccess uninitialized resources. Following trace is from an error in theinit_task where the CREATE_VPORT (op 501) is rejected by the FW:[40922.763136] idpf 0000:83:00.0: Device HW Reset initiated[40924.449797] idpf 0000:83:00.0: Transaction failed (op 501)[40958.148190] idpf 0000:83:00.0: HW reset detected[40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8...[40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf][40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf]...[40958.177932] Call Trace:[40958.178491] [40958.179040] process_one_work+0x226/0x6d0[40958.179609] worker_thread+0x19e/0x340[40958.180158] ? __pfx_worker_thread+0x10/0x10[40958.180702] kthread+0x10f/0x250[40958.181238] ? __pfx_kthread+0x10/0x10[40958.181774] ret_from_fork+0x251/0x2b0[40958.182307] ? __pfx_kthread+0x10/0x10[40958.182834] ret_from_fork_asm+0x1a/0x30[40958.183370] Fix the error handling in the init_task to make sure the service andmailbox tasks are disabled if the error happens during load. These arestarted in idpf_vc_core_init(), which spawns the init_task and has no wayof knowing if it failed. If the error happens on reset, followingsuccessful driver load, the tasks can still run, as that will allow thenetdevs to attempt recovery through another reset. Stop the PTP callbackseither way as those will be restarted by the call to idpf_vc_core_init()during a successful reset.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: 3com: 3c59x: fix possible null dereference in vortex_probe1()pdev can be null and free_ring: can be called in 1297 with a nullpdev.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of privmlx5e_priv is an unstable structure that can be memset(0) if profileattaching fails.Pass netdev to mlx5e_destroy_netdev() to guarantee it will work on avalid netdev.On mlx5e_remove: Check validity of priv->profile, before attemptingto cleanup any resources that might be not there.This fixes a kernel oops in mlx5e_remove when switchdev mode fails dueto change profile failure.$ devlink dev eswitch set pci/0000:00:03.0 mode switchdevError: mlx5_core: Failed setting eswitch to offloads.dmesg:workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTRmlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTRmlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12$ devlink dev reload pci/0000:00:03.0 ==> oopsBUG: kernel NULL pointer dereference, address: 0000000000000370PGD 0 P4D 0Oops: Oops: 0000 [#1] SMP NOPTICPU: 15 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc5+ #115 PREEMPT(voluntary)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100RSP: 0018:ffffc9000083f8b8 EFLAGS: 00010286RAX: ffff8881126fc380 RBX: ffff8881015ac400 RCX: ffffffff826ffc45RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881035109c0RBP: ffff8881035109c0 R08: ffff888101e3e838 R09: ffff888100264e10R10: ffffc9000083f898 R11: ffffc9000083f8a0 R12: ffff888101b921a0R13: ffff888101b921a0 R14: ffff8881015ac9a0 R15: ffff8881015ac400FS: 00007f789a3c8740(0000) GS:ffff88856aa59000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000000000000370 CR3: 000000010b6c0001 CR4: 0000000000370ef0Call Trace: mlx5e_remove+0x57/0x110 device_release_driver_internal+0x19c/0x200 bus_remove_device+0xc6/0x130 device_del+0x160/0x3d0 ? devl_param_driverinit_value_get+0x2d/0x90 mlx5_detach_device+0x89/0xe0 mlx5_unload_one_devl_locked+0x3a/0x70 mlx5_devlink_reload_down+0xc8/0x220 devlink_reload+0x7d/0x260 devlink_nl_reload_doit+0x45b/0x5a0 genl_family_rcv_msg_doit+0xe8/0x140
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: make calc_target() set t->paused, not just clear itCurrently calc_target() clears t->paused if the request shouldn't bepaused anymore, but doesn't ever set t->paused even though it's able todetermine when the request should be paused. Setting t->paused is leftto __submit_request() which is fine for regular requests but doesn'twork for linger requests -- since __submit_request() doesn't operateon linger requests, there is nowhere for lreq->t.paused to be set.One consequence of this is that watches don't get reestablished onpaused -> unpaused transitions in cases where requests have been pausedlong enough for the (paused) unwatch request to time out and for thesubsequent (re)watch request to enter the paused state. On top of thewatch not getting reestablished, rbd_reregister_watch() gets stuck withrbd_dev->watch_mutex held: rbd_register_watch __rbd_register_watch ceph_osdc_watch linger_reg_commit_waitIt's waiting for lreq->reg_commit_wait to be completed, but for that tohappen the respective request needs to end up on need_resend_linger listand be kicked when requests are unpaused. There is no chance for thatif the request in question is never marked paused in the first place.The fact that rbd_dev->watch_mutex remains taken out forever thenprevents the image from getting unmapped -- "rbd unmap" would inevitablyhang in D state on an attempt to grab the mutex.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panelThe connector type for the DataImage SCF0700C48GGU18 panel is missing anddevm_drm_panel_bridge_add() requires connector type to be set. This leadsto a warning and a backtrace in the kernel log and panel does not work:"WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8"The warning is triggered by a check for valid connector type indevm_drm_panel_bridge_add(). If there is no valid connector typeset for a panel, the warning is printed and panel is not added.Fill in the missing connector type to fix the warning and makethe panel operational once again.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leakFix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:gs_usb_receive_bulk_callback(): fix URB memory leak").In esd_usb_open(), the URBs for USB-in transfers are allocated, added tothe dev->rx_submitted anchor and submitted. In the complete callbackesd_usb_read_bulk_callback(), the URBs are processed and resubmitted. Inesd_usb_close() the URBs are freed by callingusb_kill_anchored_urbs(&dev->rx_submitted).However, this does not take into account that the USB framework unanchorsthe URB before the complete function is called. This means that once anin-URB has been completed, it is no longer anchored and is ultimately notreleased in esd_usb_close().Fix the memory leak by anchoring the URB in theesd_usb_read_bulk_callback() to the dev->rx_submitted anchor.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:irqchip/gic-v3-its: Avoid truncating memory addressesOn 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmemallocations to be backed by addresses physical memory above the 32-bitaddress limit, as found while experimenting with larger VMSPLITconfigurations.This caused the qemu virt model to crash in the GICv3 driver, whichallocates the 'itt' object using GFP_KERNEL. Since all memory belowthe 4GB physical address limit is in ZONE_DMA in this configuration,kmalloc() defaults to higher addresses for ZONE_NORMAL, and theITS driver stores the physical address in a 32-bit 'unsigned long'variable.Change the itt_addr variable to the correct phys_addr_t type instead,along with all other variables in this driver that hold a physicaladdress.The gicv5 driver correctly uses u64 variables, while all other irqchipdrivers don't call virt_to_phys or similar interfaces. It's expected thatother device drivers have similar issues, but fixing this one issufficient for booting a virtio based guest.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()Memory allocated for struct vscsiblk_info in scsiback_probe() is notfreed in scsiback_remove() leading to potential memory leaks on remove,as well as in the scsiback_probe() error paths. Fix that by freeing itin scsiback_remove().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix crash on synthetic stacktrace field usageWhen creating a synthetic event based on an existing synthetic event thathad a stacktrace field and the new synthetic event used that field akernel crash occurred: ~# cd /sys/kernel/tracing ~# echo 's:stack unsigned long stack[];' > dynamic_events ~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger ~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/triggerThe above creates a synthetic event that takes a stacktrace when a taskschedules out in a non-running state and passes that stacktrace to thesched_switch event when that task schedules back in. It triggers the"stack" synthetic event that has a stacktrace as its field (called "stack"). ~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events ~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger ~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/triggerThe above makes another synthetic event called "syscall_stack" thatattaches the first synthetic event (stack) to the sys_exit trace event andrecords the stacktrace from the stack event with the id of the system callthat is exiting.When enabling this event (or using it in a historgram): ~# echo 1 > events/synthetic/syscall_stack/enableProduces a kernel crash! BUG: unable to handle page fault for address: 0000000000400010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:trace_event_raw_event_synth+0x90/0x380 Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f RSP: 0018:ffffd2670388f958 EFLAGS: 00010202 RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0 RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50 R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010 R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90 FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0 Call Trace: ? __tracing_map_insert+0x208/0x3a0 action_trace+0x67/0x70 event_hist_trigger+0x633/0x6d0 event_triggers_call+0x82/0x130 trace_event_buffer_commit+0x19d/0x250 trace_event_raw_event_sys_exit+0x62/0xb0 syscall_exit_work+0x9d/0x140 do_syscall_64+0x20a/0x2f0 ? trace_event_raw_event_sched_switch+0x12b/0x170 ? save_fpregs_to_fpstate+0x3e/0x90 ? _raw_spin_unlock+0xe/0x30 ? finish_task_switch.isra.0+0x97/0x2c0 ? __rseq_handle_notify_resume+0xad/0x4c0 ? __schedule+0x4b8/0xd00 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x1ef/0x2f0 ? do_fault+0x2e9/0x540 ? __handle_mm_fault+0x7d1/0xf70 ? count_memcg_events+0x167/0x1d0 ? handle_mm_fault+0x1d7/0x2e0 ? do_user_addr_fault+0x2c3/0x7f0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe reason is that the stacktrace field is not labeled as such, and istreated as a normal field and not as a dynamic event that it is.In trace_event_raw_event_synth() the event is field is still treated as adynamic array, but the retrieval of the data is considered a normal field,and the reference is just the meta data:// Meta data is retrieved instead of a dynamic array---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:intel_th: fix device leak on output open()Make sure to drop the reference taken when looking up the th deviceduring output device open() on errors and on close().Note that a recent commit fixed the leak in a couple of open() errorpaths but not all of them, and the reference is still leaking onsuccessful open().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gue: Fix skb memleak with inner IP protocol 0.syzbot reported skb memleak below. [0]The repro generated a GUE packet with its inner protocol 0.gue_udp_recv() returns -guehdr->proto_ctype for "resubmit"in ip_protocol_deliver_rcu(), but this only works withnon-zero protocol number.Let's drop such packets.Note that 0 is a valid number (IPv6 Hop-by-Hop Option).I think it is not practical to encap HOPOPT in GUE, so oncesomeone starts to complain, we could pass down a resubmitflag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT[0]BUG: memory leakunreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:migrate: correct lock ordering for hugetlb file foliosSyzbot has found a deadlock (analyzed by Lance Yang):1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock).2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquirefolio_lock.migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() <- Takes folio_lock! -> remove_migration_ptes() -> __rmap_walk_file() -> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)!hugetlbfs_fallocate() -> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)! -> hugetlbfs_zero_partial_page() -> filemap_lock_hugetlb_folio() -> filemap_lock_folio() -> __filemap_get_folio <- Waits for folio_lock!The migration path is the one taking locks in the wrong order according tothe documentation at the top of mm/rmap.c. So expand the scope of theexisting i_mmap_lock to cover the calls to remove_migration_ptes() too.This is (mostly) how it used to be after commit c0d0381ade79. That wasremoved by 336bf30eb765 for both file & anon hugetlb pages when it shouldonly have been removed for anon hugetlb pages.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: limit BOND_MODE_8023AD to Ethernet devicesBOND_MODE_8023AD makes sense for ARPHRD_ETHER only.syzbot reported: BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline] BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full)Tainted: [L]=SOFTLOCKUPHardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025Call Trace: dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 __hw_addr_create net/core/dev_addr_lists.c:63 [inline] __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:868 [inline] dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886 bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180 do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963 do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 ____sys_sendmsg+0x505/0x820 net/socket.c:2592 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646 __sys_sendmsg+0x164/0x220 net/socket.c:2678 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307 do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332 entry_SYSENTER_compat_after_hwframe+0x84/0x8e The buggy address belongs to the variable: lacpdu_mcast_addr+0x0/0x40
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arm64/fpsimd: signal: Fix restoration of SVE contextWhen SME is supported, Restoring SVE signal context can go wrong in afew ways, including placing the task into an invalid state where thekernel may read from out-of-bounds memory (and may potentially take afatal fault) and/or may kill the task with a SIGKILL.(1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into an invalid state where SVCR.SM is set (and sve_state is non-NULL) but TIF_SME is clear, consequently resuting in out-of-bounds memory reads and/or killing the task with SIGKILL. This can only occur in unusual (but legitimate) cases where the SVE signal context has either been modified by userspace or was saved in the context of another task (e.g. as with CRIU), as otherwise the presence of an SVE signal context with SVE_SIG_FLAG_SM implies that TIF_SME is already set. While in this state, task_fpsimd_load() will NOT configure SMCR_ELx (leaving some arbitrary value configured in hardware) before restoring SVCR and attempting to restore the streaming mode SVE registers from memory via sve_load_state(). As the value of SMCR_ELx.LEN may be larger than the task's streaming SVE vector length, this may read memory outside of the task's allocated sve_state, reading unrelated data and/or triggering a fault. While this can result in secrets being loaded into streaming SVE registers, these values are never exposed. As TIF_SME is clear, fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0 accesses to streaming mode SVE registers, so these cannot be accessed directly at EL0. As fpsimd_save_user_state() verifies the live vector length before saving (S)SVE state to memory, no secret values can be saved back to memory (and hence cannot be observed via ptrace, signals, etc). When the live vector length doesn't match the expected vector length for the task, fpsimd_save_user_state() will send a fatal SIGKILL signal to the task. Hence the task may be killed after executing userspace for some period of time.(2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the task's SVCR.SM. If SVCR.SM was set prior to restoring the context, then the task will be left in streaming mode unexpectedly, and some register state will be combined inconsistently, though the task will be left in legitimate state from the kernel's PoV. This can only occur in unusual (but legitimate) cases where ptrace has been used to set SVCR.SM after entry to the sigreturn syscall, as syscall entry clears SVCR.SM. In these cases, the the provided SVE register data will be loaded into the task's sve_state using the non-streaming SVE vector length and the FPSIMD registers will be merged into this using the streaming SVE vector length.Fix (1) by setting TIF_SME when setting SVCR.SM. This also requiresensuring that the task's sme_state has been allocated, but as this couldcontain live ZA state, it should not be zeroed. Fix (2) by clearingSVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear.For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME,and fp_type earlier, immediately after the allocation ofsve_state/sme_state, before the restore of the actual register state.This makes it easier to ensure that these are always modifiedconsistently, even if a fault is taken while reading the register datafrom the signal context. I do not expect any software to depend on theexact state restored when a fault is taken while reading the context.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loopCurrently this is checked before running the pending work. Normally thisis quite fine, as work items either end up blocking (which will create anew worker for other items), or they complete fairly quickly. But syzbotreports an issue where io-wq takes seemingly forever to exit, and with abit of debugging, this turns out to be because it queues a bunch of big(2GB - 4096b) reads with a /dev/msr* file. Since this file type doesn'tsupport ->read_iter(), loop_rw_iter() ends up handling them. Each readreturns 16MB of data read, which takes 20 (!!) seconds. With a bunch ofthese pending, processing the whole chain can take a long time. Easilylonger than the syzbot uninterruptible sleep timeout of 140 seconds.This then triggers a complaint off the io-wq exit path:INFO: task syz.4.135:6326 blocked for more than 143 seconds. Not tainted syzkaller #0 Blocked by coredump."echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.task:syz.4.135 state:D stack:26824 pid:6326 tgid:6324 ppid:5957 task_flags:0x400548 flags:0x00080000Call Trace: context_switch kernel/sched/core.c:5256 [inline] __schedule+0x1139/0x6150 kernel/sched/core.c:6863 __schedule_loop kernel/sched/core.c:6945 [inline] schedule+0xe7/0x3a0 kernel/sched/core.c:6960 schedule_timeout+0x257/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:100 [inline] __wait_for_common+0x2fc/0x4e0 kernel/sched/completion.c:121 io_wq_exit_workers io_uring/io-wq.c:1328 [inline] io_wq_put_and_exit+0x271/0x8a0 io_uring/io-wq.c:1356 io_uring_clean_tctx+0x10d/0x190 io_uring/tctx.c:203 io_uring_cancel_generic+0x69c/0x9a0 io_uring/cancel.c:651 io_uring_files_cancel include/linux/io_uring.h:19 [inline] do_exit+0x2ce/0x2bd0 kernel/exit.c:911 do_group_exit+0xd3/0x2a0 kernel/exit.c:1112 get_signal+0x2671/0x26d0 kernel/signal.c:3034 arch_do_signal_or_restart+0x8f/0x7e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:41 [inline] exit_to_user_mode_loop+0x8c/0x540 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x4ee/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7fa02738f749RSP: 002b:00007fa0281ae0e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000caRAX: fffffffffffffe00 RBX: 00007fa0275e6098 RCX: 00007fa02738f749RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fa0275e6098RBP: 00007fa0275e6090 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000R13: 00007fa0275e6128 R14: 00007fff14e4fcb0 R15: 00007fff14e4fd98There's really nothing wrong here, outside of processing these readswill take a LONG time. However, we can speed up the exit by checking theIO_WQ_BIT_EXIT inside the io_worker_handle_work() loop, as syzbot willexit the ring after queueing up all of these reads. Then once the firstitem is processed, io-wq will simply cancel the rest. That should avoidsyzbot running into this complaint again.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpuFor i.MX8MQ platform, the ADB in the VPUMIX domain has no separate resetand clock enable bits, but is ungated and reset together with the VPUs.So we can't reset G1 or G2 separately, it may led to the system hang.Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data.Let imx8mq_vpu_power_notifier() do really vpu reset.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix data-race warning and potential load/store tearingFix the following: BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packetwhich is reporting an issue with the reads and writes to ->last_tx_at in: conn->peer->last_tx_at = ktime_get_seconds();and: keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME;The lockless accesses to these to values aren't actually a problem as theread only needs an approximate time of last transmission for the purposesof deciding whether or not the transmission of a keepalive packet iswarranted yet.Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bitarch.Fix both of these by switching to an unsigned int for ->last_tx_at and onlystoring the LSW of the time64_t. It can then be reconstructed at needprovided no more than 68 years has elapsed since the last transmission.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: provide a net pointer to __skb_flow_dissect()After 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect")we have to provide a net pointer to __skb_flow_dissect(),either via skb->dev, skb->sk, or a user provided pointer.In the following case, syzbot was able to cook a bare skb.WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053Call Trace: bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline] __bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157 bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline] bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline] bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515 xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388 bpf_prog_run_xdp include/net/xdp.h:700 [inline] bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421 bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390 bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703 __sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182 __do_sys_bpf kernel/bpf/syscall.c:6274 [inline] __se_sys_bpf kernel/bpf/syscall.c:6272 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:l2tp: avoid one data-race in l2tp_tunnel_del_work()We should read sk->sk_socket only when dealing with kernel sockets.syzbot reported the following data-race:BUG: KCSAN: data-race in l2tp_tunnel_del_work / sk_common_releasewrite to 0xffff88811c182b20 of 8 bytes by task 5365 on cpu 0: sk_set_socket include/net/sock.h:2092 [inline] sock_orphan include/net/sock.h:2118 [inline] sk_common_release+0xae/0x230 net/core/sock.c:4003 udp_lib_close+0x15/0x20 include/net/udp.h:325 inet_release+0xce/0xf0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:662 [inline] sock_close+0x6b/0x150 net/socket.c:1455 __fput+0x29b/0x650 fs/file_table.c:468 ____fput+0x1c/0x30 fs/file_table.c:496 task_work_run+0x131/0x1a0 kernel/task_work.c:233 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] __exit_to_user_mode_loop kernel/entry/common.c:44 [inline] exit_to_user_mode_loop+0x1fe/0x740 kernel/entry/common.c:75 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:159 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:194 [inline] do_syscall_64+0x1e1/0x2b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7fread to 0xffff88811c182b20 of 8 bytes by task 827 on cpu 1: l2tp_tunnel_del_work+0x2f/0x1a0 net/l2tp/l2tp_core.c:1418 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0x4ce/0x9d0 kernel/workqueue.c:3340 worker_thread+0x582/0x770 kernel/workqueue.c:3421 kthread+0x489/0x510 kernel/kthread.c:463 ret_from_fork+0x149/0x290 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246value changed: 0xffff88811b818000 -> 0x0000000000000000
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: annotate data-race in ndisc_router_discovery()syzbot found that ndisc_router_discovery() could read and writein6_dev->ra_mtu without holding a lock [1]This looks fine, IFLA_INET6_RA_MTU is best effort.Add READ_ONCE()/WRITE_ONCE() to document the race.Note that we might also reject illegal MTU values(mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch.[1]BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discoveryread to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1: ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558 ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841 icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989 ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438 ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500 ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79...write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0: ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559 ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841 icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989 ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438 ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500 ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79...value changed: 0x00000000 -> 0xe5400659
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INITA null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH keyinitialization fails: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2 RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline] RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401 Call Trace: sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189 sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111 sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217 sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169 sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052 sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88 sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243 sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127The issue is triggered when sctp_auth_asoc_init_active_key() fails insctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, thecommand sequence is currently:- SCTP_CMD_PEER_INIT- SCTP_CMD_TIMER_STOP (T1_INIT)- SCTP_CMD_TIMER_START (T1_COOKIE)- SCTP_CMD_NEW_STATE (COOKIE_ECHOED)- SCTP_CMD_ASSOC_SHKEY- SCTP_CMD_GEN_COOKIE_ECHOIf SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, whileasoc->peer.auth_capable and asoc->peer.peer_chunks have already been set bySCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULLto be queued by sctp_datamsg_from_user().Since command interpretation stops on failure, no COOKIE_ECHO should beensent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has alreadybeen started, and it may enqueue a COOKIE_ECHO into the outqueue later. Asa result, the DATA chunk can be transmitted together with the COOKIE_ECHOin sctp_outq_flush_data(), leading to the observed issue.Similar to the other places where it calls sctp_auth_asoc_init_active_key()right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEYimmediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and startingT1_COOKIE. This ensures that if shared key generation fails, authenticatedDATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT,giving the client another chance to process INIT_ACK and retry key setup.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netdevsim: fix a race issue related to the operation on bpf_bound_progs listThe netdevsim driver lacks a protection mechanism for operations on thebpf_bound_progs list. When the nsim_bpf_create_prog() performslist_add_tail, it is possible that nsim_bpf_destroy_prog() issimultaneously performs list_del. Concurrent operations on the list maylead to list corruption and trigger a kernel crash as follows:[ 417.290971] kernel BUG at lib/list_debug.c:62![ 417.290983] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI[ 417.290992] CPU: 10 PID: 168 Comm: kworker/10:1 Kdump: loaded Not tainted 6.19.0-rc5 #1[ 417.291003] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[ 417.291007] Workqueue: events bpf_prog_free_deferred[ 417.291021] RIP: 0010:__list_del_entry_valid_or_report+0xa7/0xc0[ 417.291034] Code: a8 ff 0f 0b 48 89 fe 48 89 ca 48 c7 c7 48 a1 eb ae e8 ed fb a8 ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 80 a1 eb ae e8 d9 fb a8 ff <0f> 0b 48 89 d1 48 c7 c7 d0 a1 eb ae 48 89 f2 48 89 c6 e8 c2 fb a8[ 417.291040] RSP: 0018:ffffb16a40807df8 EFLAGS: 00010246[ 417.291046] RAX: 000000000000006d RBX: ffff8e589866f500 RCX: 0000000000000000[ 417.291051] RDX: 0000000000000000 RSI: ffff8e59f7b23180 RDI: ffff8e59f7b23180[ 417.291055] RBP: ffffb16a412c9000 R08: 0000000000000000 R09: 0000000000000003[ 417.291059] R10: ffffb16a40807c80 R11: ffffffffaf9edce8 R12: ffff8e594427ac20[ 417.291063] R13: ffff8e59f7b44780 R14: ffff8e58800b7a05 R15: 0000000000000000[ 417.291074] FS: 0000000000000000(0000) GS:ffff8e59f7b00000(0000) knlGS:0000000000000000[ 417.291079] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 417.291083] CR2: 00007fc4083efe08 CR3: 00000001c3626006 CR4: 0000000000770ee0[ 417.291088] PKRU: 55555554[ 417.291091] Call Trace:[ 417.291096] [ 417.291103] nsim_bpf_destroy_prog+0x31/0x80 [netdevsim][ 417.291154] __bpf_prog_offload_destroy+0x2a/0x80[ 417.291163] bpf_prog_dev_bound_destroy+0x6f/0xb0[ 417.291171] bpf_prog_free_deferred+0x18e/0x1a0[ 417.291178] process_one_work+0x18a/0x3a0[ 417.291188] worker_thread+0x27b/0x3a0[ 417.291197] ? __pfx_worker_thread+0x10/0x10[ 417.291207] kthread+0xe5/0x120[ 417.291214] ? __pfx_kthread+0x10/0x10[ 417.291221] ret_from_fork+0x31/0x50[ 417.291230] ? __pfx_kthread+0x10/0x10[ 417.291236] ret_from_fork_asm+0x1a/0x30[ 417.291246] Add a mutex lock, to prevent simultaneous addition and deletion operationson the list.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: Set __nocfi on swsusp_arch_resume()A DABT is reported[1] on an android based system when resume from hiberate.This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*()and does not have a CFI hash, but swsusp_arch_resume() will attempt toverify the CFI hash when calling a copy of swsusp_arch_suspend_exit().Given that there's an existing requirement that the entrypoint toswsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.textsection, we cannot fix this by marking swsusp_arch_suspend_exit() withSYM_FUNC_*(). The simplest fix for now is to disable the CFI check inswsusp_arch_resume().Mark swsusp_arch_resume() as __nocfi to disable the CFI check.[1][ 22.991934][ T1] Unable to handle kernel paging request at virtual address 0000000109170ffc[ 22.991934][ T1] Mem abort info:[ 22.991934][ T1] ESR = 0x0000000096000007[ 22.991934][ T1] EC = 0x25: DABT (current EL), IL = 32 bits[ 22.991934][ T1] SET = 0, FnV = 0[ 22.991934][ T1] EA = 0, S1PTW = 0[ 22.991934][ T1] FSC = 0x07: level 3 translation fault[ 22.991934][ T1] Data abort info:[ 22.991934][ T1] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000[ 22.991934][ T1] CM = 0, WnR = 0, TnD = 0, TagAccess = 0[ 22.991934][ T1] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[ 22.991934][ T1] [0000000109170ffc] user address but active_mm is swapper[ 22.991934][ T1] Internal error: Oops: 0000000096000007 [#1] PREEMPT SMP[ 22.991934][ T1] Dumping ftrace buffer:[ 22.991934][ T1] (ftrace buffer empty)[ 22.991934][ T1] Modules linked in:[ 22.991934][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.98-android15-8-g0b1d2aee7fc3-dirty-4k #1 688c7060a825a3ac418fe53881730b355915a419[ 22.991934][ T1] Hardware name: Unisoc UMS9360-base Board (DT)[ 22.991934][ T1] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 22.991934][ T1] pc : swsusp_arch_resume+0x2ac/0x344[ 22.991934][ T1] lr : swsusp_arch_resume+0x294/0x344[ 22.991934][ T1] sp : ffffffc08006b960[ 22.991934][ T1] x29: ffffffc08006b9c0 x28: 0000000000000000 x27: 0000000000000000[ 22.991934][ T1] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000820[ 22.991934][ T1] x23: ffffffd0817e3000 x22: ffffffd0817e3000 x21: 0000000000000000[ 22.991934][ T1] x20: ffffff8089171000 x19: ffffffd08252c8c8 x18: ffffffc080061058[ 22.991934][ T1] x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 0000000000000004[ 22.991934][ T1] x14: ffffff8178c88000 x13: 0000000000000006 x12: 0000000000000000[ 22.991934][ T1] x11: 0000000000000015 x10: 0000000000000001 x9 : ffffffd082533000[ 22.991934][ T1] x8 : 0000000109171000 x7 : 205b5d3433393139 x6 : 392e32322020205b[ 22.991934][ T1] x5 : 000000010916f000 x4 : 000000008164b000 x3 : ffffff808a4e0530[ 22.991934][ T1] x2 : ffffffd08058e784 x1 : 0000000082326000 x0 : 000000010a283000[ 22.991934][ T1] Call trace:[ 22.991934][ T1] swsusp_arch_resume+0x2ac/0x344[ 22.991934][ T1] hibernation_restore+0x158/0x18c[ 22.991934][ T1] load_image_and_restore+0xb0/0xec[ 22.991934][ T1] software_resume+0xf4/0x19c[ 22.991934][ T1] software_resume_initcall+0x34/0x78[ 22.991934][ T1] do_one_initcall+0xe8/0x370[ 22.991934][ T1] do_initcall_level+0xc8/0x19c[ 22.991934][ T1] do_initcalls+0x70/0xc0[ 22.991934][ T1] do_basic_setup+0x1c/0x28[ 22.991934][ T1] kernel_init_freeable+0xe0/0x148[ 22.991934][ T1] kernel_init+0x20/0x1a8[ 22.991934][ T1] ret_from_fork+0x10/0x20[ 22.991934][ T1] Code: a9400a61 f94013e0 f9438923 f9400a64 (b85fc110)[catalin.marinas@arm.com: commit log updated by Mark Rutland]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: reset sparse-read state in osd_fault()When a fault occurs, the connection is abandoned, reestablished, and anypending operations are retried. The OSD client tracks the progress of asparse-read reply using a separate state machine, largely independent ofthe messenger's state.If a connection is lost mid-payload or the sparse-read state machinereturns an error, the sparse-read state is not reset. The OSD clientwill then interpret the beginning of a new reply as the continuation ofthe old one. If this makes the sparse-read machinery enter a failurestate, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on readTherefore, reset the sparse-read state in osd_fault(), ensuring retriesstart from a clean state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Add recursion protection in kernel stack trace recordingA bug was reported about an infinite recursion caused by tracing the rcuevents with the kernel stack trace trigger enabled. The stack trace codecalled back into RCU which then called the stack trace again.Expand the ftrace recursion protection to add a set of bits to protectevents from recursion. Each bit represents the context that the event isin (normal, softirq, interrupt and NMI).Have the stack trace code use the interrupt context to protect againstrecursion.Note, the bug showed an issue in both the RCU code as well as the tracingstacktrace code. This only handles the tracing stack trace side of thebug. The RCU fix will be handled separately.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conncount: update last_gc only when GC has been performedCurrently last_gc is being updated everytime a new connection istracked, that means that it is updated even if a GC wasn't performed.With a sufficiently high packet rate, it is possible to always bypassthe GC, causing the list to grow infinitely.Update the last_gc value only when a GC has been actually performed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, test_run: Subtract size of xdp_frame from allowed metadata sizeThe xdp_frame structure takes up part of the XDP frame headroom,limiting the size of the metadata. However, in bpf_test_run, we don'ttake this into account, which makes it possible for userspace to supplya metadata size that is too large (taking up the entire headroom).If userspace supplies such a large metadata size in live packet mode,the xdp_update_frame_from_buff() call in xdp_test_run_init_page() callwill fail, after which packet transmission proceeds with anuninitialised frame structure, leading to the usual Bad Stuff.The commit in the Fixes tag fixed a related bug where the second checkin xdp_update_frame_from_buff() could fail, but did not add anyadditional constraints on the metadata size. Complete the fix by addingan additional check on the metadata size. Reorder the checks slightly tomake the logic clearer and add a comment.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: fix segmentation of forwarding fraglist GROThis patch enhances GSO segment handling by properly checkingthe SKB_GSO_DODGY flag for frag_list GSO packets, addressinglow throughput issues observed when a station accesses IPv4servers via hotspots with an IPv6-only upstream interface.Specifically, it fixes a bug in GSO segmentation when forwardingGRO packets containing a frag_list. The function skb_segment_listcannot correctly process GRO skbs that have been converted by XLAT,since XLAT only translates the header of the head skb. Consequently,skbs in the frag_list may remain untranslated, resulting in protocolinconsistencies and reduced throughput.To address this, the patch explicitly sets the SKB_GSO_DODGY flagfor GSO packets in XLAT's IPv4/IPv6 protocol translation helpers(bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSOpackets as potentially modified after protocol translation. As aresult, GSO segmentation will avoid using skb_segment_list andinstead falls back to skb_segment for packets with the SKB_GSO_DODGYflag. This ensures that only safe and fully translated frag_listpackets are processed by skb_segment_list, resolving protocolinconsistencies and improving throughput when forwarding GRO packetsconverted by XLAT.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeon_ep: Fix memory leak in octep_device_setup()In octep_device_setup(), if octep_ctrl_net_init() fails, the functionreturns directly without unmapping the mapped resources and freeing theallocated configuration memory.Fix this by jumping to the unsupported_dev label, which performs thenecessary cleanup. This aligns with the error handling logic of otherpaths in this function.Compile tested only. Issue found using a prototype static analysis tooland code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rocker: fix memory leak in rocker_world_port_post_fini()In rocker_world_port_pre_init(), rocker_port->wpriv is allocated withkzalloc(wops->port_priv_size, GFP_KERNEL). However, inrocker_world_port_post_fini(), the memory is only freed whenwops->port_post_fini callback is set: if (!wops->port_post_fini) return; wops->port_post_fini(rocker_port); kfree(rocker_port->wpriv);Since rocker_ofdpa_ops does not implement port_post_fini callback(it is NULL), the wpriv memory allocated for each port is never freedwhen ports are removed. This leads to a memory leak ofsizeof(struct ofdpa_port) bytes per port on every device removal.Fix this by always calling kfree(rocker_port->wpriv) regardless ofwhether the port_post_fini callback exists.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: nci: Fix race between rfkill and nci_unregister_device().syzbot reported the splat below [0] without a repro.It indicates that struct nci_dev.cmd_wq had been destroyed beforenci_close_device() was called via rfkill.nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which(I think) was called from virtual_ncidev_close() when syzbot close()dan fd of virtual_ncidev.The problem is that nci_unregister_device() destroys nci_dev.cmd_wqfirst and then calls nfc_unregister_device(), which removes thedevice from rfkill by rfkill_unregister().So, the device is still visible via rfkill even after nci_dev.cmd_wqis destroyed.Let's unregister the device from rfkill first in nci_unregister_device().Note that we cannot call nfc_unregister_device() beforenci_close_device() because 1) nfc_unregister_device() calls device_del() which frees all memory allocated by devm_kzalloc() and linked to ndev->conn_info_list 2) nci_rx_work() could try to queue nci_conn_info to ndev->conn_info_list which could be leakedThus, nfc_unregister_device() is split into two functions so wecan remove rfkill interfaces only before nci_close_device().[0]:DEBUG_LOCKS_WARN_ON(1)WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349Modules linked in:CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline]RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1fRSP: 0018:ffffc9000c767680 EFLAGS: 00010046RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0Call Trace: lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868 touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940 __flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982 nci_close_device+0x302/0x630 net/nfc/nci/core.c:567 nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639 nfc_dev_down+0x152/0x290 net/nfc/core.c:161 nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179 rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346 rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301 vfs_write+0x29a/0xb90 fs/read_write.c:684 ksys_write+0x150/0x270 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7fa59b39acb9Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007RBP: 00007fa59b408bf7 R08: ---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:flex_proportions: make fprop_new_period() hardirq safeBernd has reported a lockdep splat from flexible proportions code that isessentially complaining about the following race:run_timer_softirq - we are in softirq context call_timer_fn writeout_period fprop_new_period write_seqcount_begin(&p->sequence); ... blk_mq_end_request() blk_update_request() ext4_end_bio() folio_end_writeback() __wb_writeout_add() __fprop_add_percpu_max() if (unlikely(max_frac < FPROP_FRAC_BASE)) { fprop_fraction_percpu() seq = read_seqcount_begin(&p->sequence); - sees odd sequence so loops indefinitelyNote that a deadlock like this is only possible if the bdi has configuredmaximum fraction of writeout throughput which is very rare in general butfrequent for example for FUSE bdis. To fix this problem we have to makesure write section of the sequence counter is irqsafe.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: wwan: t7xx: fix potential skb->frags overflow in RX pathWhen receiving data in the DPMAIF RX path,the t7xx_dpmaif_set_frag_to_skb() function addspage fragments to an skb without checking if the number offragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflowin skb_shinfo(skb)->frags[] array, corrupting adjacent memory andpotentially causing kernel crashes or other undefined behavior.This issue was identified through static code analysis by comparing with asimilar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:fix array overflow on receiving too many fragments for a packet").The vulnerability could be triggered if the modem firmware sends packetswith excessive fragments. While under normal protocol conditions (MTU 3080bytes, BAT buffer 3584 bytes),a single packet should not require additionalfragments, the kernel should not blindly trust firmware behavior.Malicious, buggy, or compromised firmware could potentially craft packetswith more fragments than the kernel expects.Fix this by adding a bounds check before calling skb_add_rx_frag() toensure nr_frags does not exceed MAX_SKB_FRAGS.The check must be performed before unmapping to avoid a page leakand double DMA unmap during device teardown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready()When the socket is closed while in TCP_LISTEN a callback is run toflush all outstanding packets, which in turns callsnvmet_tcp_listen_data_ready() with the sk_callback_lock held.So we need to check if we are in TCP_LISTEN before attemptingto get the sk_callback_lock() to avoid a deadlock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domainsFix out-of-range access of bc->domains in imx8m_blk_ctrl_remove().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix oops due to invalid pointer for kfree() in parse_longname()This fixes a kernel oops when reading ceph snapshot directories (.snap),for example by simply running `ls /mnt/my_ceph/.snap`.The variable str is guarded by __free(kfree), but advanced by one forskipping the initial '_' in snapshot names. Thus, kfree() is calledwith an invalid pointer. This patch removes the need for advancing thepointer so kfree() is called with correct memory pointer.Steps to reproduce:1. Create snapshots on a cephfs volume (I've 63 snaps in my testcase)2. Add cephfs mount to fstab$ echo "samba-fileserver@.files=/volumes/datapool/stuff/3461082b-ecc9-4e82-8549-3fd2590d3fb6 /mnt/test/stuff ceph acl,noatime,_netdev 0 0" >> /etc/fstab3. Reboot the system$ systemctl reboot4. Check if it's really mounted$ mount | grep stuff5. List snapshots (expected 63 snapshots on my system)$ ls /mnt/test/stuff/.snapNow ls hangs forever and the kernel log shows the oops.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: annotate data-races around slave->last_rxslave->last_rx and slave->target_last_arp_rx[...] can be read and writtenlocklessly. Add READ_ONCE() and WRITE_ONCE() annotations.syzbot reported:BUG: KCSAN: data-race in bond_rcv_validate / bond_rcv_validatewrite to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 1: bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335 bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533 __netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039 __netif_receive_skb_one_core net/core/dev.c:6150 [inline] __netif_receive_skb+0x59/0x270 net/core/dev.c:6265 netif_receive_skb_internal net/core/dev.c:6351 [inline] netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410...write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 0: bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335 bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533 __netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039 __netif_receive_skb_one_core net/core/dev.c:6150 [inline] __netif_receive_skb+0x59/0x270 net/core/dev.c:6265 netif_receive_skb_internal net/core/dev.c:6351 [inline] netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410 br_netif_receive_skb net/bridge/br_input.c:30 [inline] NF_HOOK include/linux/netfilter.h:318 [inline]...value changed: 0x0000000100005365 -> 0x0000000100005366
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()In iscsit_dec_conn_usage_count(), the function calls complete() whileholding the conn->conn_usage_lock. As soon as complete() is invoked, thewaiter (such as iscsit_close_connection()) may wake up and proceed to freethe iscsit_conn structure.If the waiter frees the memory before the current thread reachesspin_unlock_bh(), it results in a KASAN slab-use-after-free as the functionattempts to release a lock within the already-freed connection structure.Fix this by releasing the spinlock before calling complete().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: virtio - Add spinlock protection with virtqueue notificationWhen VM boots with one virtio-crypto PCI device and builtin backend,run openssl benchmark command with multiple processes, such as openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32openssl processes will hangup and there is error reported like this: virtio_crypto virtio0: dataq.0:id 3 is not a head!It seems that the data virtqueue need protection when it is handledfor virtio done notification. If the spinlock protection is addedin virtcrypto_done_task(), openssl benchmark with multiple processesworks well.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/siw: Fix potential NULL pointer dereference in header processingIf siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()dereferences qp->rx_fpdu->more_ddp_segs without checking, whichmay lead to a NULL pointer deref. Only check more_ddp_segs whenrx_fpdu is present.KASAN splat:[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7][ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme: fix memory allocation in nvme_pr_read_keys()nvme_pr_read_keys() takes num_keys from userspace and uses it tocalculate the allocation size for rse via struct_size(). The upperlimit is PR_KEYS_MAX (64K).A malicious or buggy userspace can pass a large num_keys value thatresults in a 4MB allocation attempt at most, causing a warning inthe page allocator when the order exceeds MAX_PAGE_ORDER.To fix this, use kvzalloc() instead of kzalloc().This bug has the same reasoning and fix with the patch below:https://lore.kernel.org/linux-block/20251212013510.3576091-1-kartikey406@gmail.com/Warning log:WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272Modules linked in:CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0dRSP: 0018:ffffc90000fcf450 EFLAGS: 00010246RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0Call Trace: alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486 alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557 ___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598 __kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629 __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245 blkdev_pr_read_keys block/ioctl.c:456 [inline] blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730 blkdev_ioctl+0x299/0x700 block/ioctl.c:786 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583 x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7eRIP: 0033:0x7fb893d3108dCode: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108dRDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfigurationlink_id is taken from the ML Reconfiguration element (control & 0x000f),so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS(15) elements, so index 15 is out-of-bounds. Skip subelements withlink_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-boundswrite.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: secure_seq: add back ports to TS offsetThis reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")tcp_tw_recycle went away in 2017.Zhouyan Deng reported off-path TCP source port leakage viaSYN cookie side-channel that can be fixed in multiple ways.One of them is to bring back TCP ports in TS offset randomization.As a bonus, we perform a single siphash() computationto provide both an ISN and a TS offset.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: dvb-core: fix wrong reinitialization of ringbuffer on reopendvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens theDVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), whichreinitializes the waitqueue list head to empty.Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of thesame DVR device share it), this orphans any existing waitqueue entriesfrom io_uring poll or epoll, leaving them with stale prev/next pointerswhile the list head is reset to {self, self}.The waitqueue and spinlock in dvr_buffer are already properlyinitialized once in dvb_dmxdev_init(). The open path only needs toreset the buffer data pointer, size, and read/write positions.Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with directassignment of data/size and a call to dvb_ringbuffer_reset(), whichproperly resets pread, pwrite, and error with correct memory orderingwithout touching the waitqueue or spinlock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: liquidio: Fix off-by-one error in VF setup_nic_devices() cleanupIn setup_nic_devices(), the initialization loop jumps to the labelsetup_nic_dev_free on failure. The current cleanup loop while(i--)skip the failing index i, causing a memory leak.Fix this by changing the loop to iterate from the current index idown to 0.Compile tested only. Issue found using code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanupIn setup_nic_devices(), the initialization loop jumps to the labelsetup_nic_dev_free on failure. The current cleanup loop while(i--)skip the failing index i, causing a memory leak.Fix this by changing the loop to iterate from the current index idown to 0.Also, decrement i in the devlink_alloc failure path to point to thelast successfully allocated index.Compile tested only. Issue found using code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem"This reverts commit 7294863a6f01248d72b61d38478978d638641bee.This commit was erroneously applied again after commit 0ab5d711ec74("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")removed it, leading to very hard to debug crashes, when used with a system with twoAMD GPUs of which only one supports ASPM.(cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocksAs Paolo said earlier [1]:"Since the blamed commit below, classify can return TC_ACT_CONSUMED whilethe current skb being held by the defragmentation engine. As reported byGangMin Kim, if such packet is that may cause a UaF when the defrag enginelater on tries to tuch again such packet."act_ct was never meant to be used in the egress path, however some usersare attaching it to egress today [2]. Attempting to reach a middleground, we noticed that, while most qdiscs are not handlingTC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, weaddress the issue by only allowing act_ct to bind to clsact/ingressqdiscs and shared blocks. That way it's still possible to attach act_ct toegress (albeit only with clsact).[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()Fix a user triggerable leak on the system call failure path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: pn533: properly drop the usb interface reference on disconnectWhen the device is disconnected from the driver, there is a "dangling"reference count on the usb interface that was grabbed in the probecallback. Fix this up by properly dropping the reference after we aredone with it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthopWhen a standalone IPv6 nexthop object is created with a loopback device(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifiesit as a reject route. This is because nexthop objects have no destinationprefix (fc_dst=::), causing fib6_is_reject() to match any loopbacknexthop. The reject path skips fib_nh_common_init(), leavingnhc_pcpu_rth_output unallocated. If an IPv4 route later references thisnexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output andpanics.Simplify the check in fib6_nh_init() to only match explicit rejectroutes (RTF_REJECT) instead of using fib6_is_reject(). The loopbackpromotion heuristic in fib6_is_reject() is handled separately byip6_route_info_create_nh(). After this change, the three cases behaveas follows:1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change.2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless.3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: annotate data-races around sk->sk_{data_ready,write_space}skmsg (and probably other layers) are changing these pointerswhile other cpus might read them concurrently.Add corresponding READ_ONCE()/WRITE_ONCE() annotationsfor UDP, TCP and AF_UNIX.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: Don't log plaintext credentials in cifs_set_cifscredsWhen debug logging is enabled, cifs_set_cifscreds() logs the keypayload and exposes the plaintext username and password. Remove thedebug log to avoid exposing credentials.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a messageWhen looking at the data in a USB urb, the actual_length is the size ofthe buffer passed to the driver, not the transfer_buffer_length which isset by the driver as the max size of the buffer.When parsing the messages in ems_usb_read_bulk_callback() properly checkthe size both at the beginning of parsing the message to make sure it isbig enough for the expected structure, and at the end of the message tomake sure we don't overflow past the end of the buffer for the nextmessage.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loadedbond_option_mode_set() already rejects mode changes that would make aloaded XDP program incompatible via bond_xdp_check(). However,bond_option_xmit_hash_policy_set() has no such guard.For 802.3ad and balance-xor modes, bond_xdp_check() returns false whenxmit_hash_policy is vlan+srcmac, because the 802.1q payload is usuallyabsent due to hardware offload. This means a user can:1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode with a compatible xmit_hash_policy (e.g. layer2+3).2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.This leaves bond->xdp_prog set but bond_xdp_check() now returning falsefor the same device. When the bond is later destroyed, dev_xdp_uninstall()calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hitsthe bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when anXDP program is loaded on a bond in 802.3ad or balance-xor mode.commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")introduced bond_xdp_check() which returns false for 802.3ad/balance-xormodes when xmit_hash_policy is vlan+srcmac. The check was wired intobond_xdp_set() to reject XDP attachment with an incompatible policy, butthe symmetric path -- preventing xmit_hash_policy from being changed to anincompatible value after XDP is already loaded -- was left unguarded inbond_option_xmit_hash_policy_set().Note:commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")later added a similar guard to bond_option_mode_set(), butbond_option_xmit_hash_policy_set() remained unprotected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: Fix preempt count leak in napi poll tracepointUsing get_cpu() in the tracepoint assignment causes an obvious preemptcount leak because nothing invokes put_cpu() to undo it: softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?This clearly has seen a lot of testing in the last 3+ years...Use smp_processor_id() instead.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()Check frame length before accessing the mgmt fields inmt76_connac2_mac_write_txwi_80211 in order to avoid a possible oobaccess.[fix check to also cover mgmt->u.action.u.addba_req.capab,correct Fixes tag]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Use correct version for UAC3 header validationThe entry of the validators table for UAC3 AC header descriptor isdefined with the wrong protocol version UAC_VERSION_2, while it shouldhave been UAC_VERSION_3. This results in the validator never matchingfor actual UAC3 devices (protocol == UAC_VERSION_3), causing theirheader descriptors to bypass validation entirely. A malicious USBdevice presenting a truncated UAC3 header could exploit this to causeout-of-bounds reads when the driver later accesses unvalidateddescriptor fields.The bug was introduced in the same commit as the recently fixed UAC3feature unit sub-type typo, and appears to be from the same copy-pasteerror when the UAC3 section was created from the UAC2 section.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()Check frame length before accessing the mgmt fields inmt7996_mac_write_txwi_80211 in order to avoid a possible oob access.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed()cxl_payload_from_user_allowed() casts and dereferences the inputpayload without first verifying its size. When a raw mailbox commandis sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG,which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer,triggering a KASAN splat:BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x650 mm/kasan/report.c:482 kasan_report+0xce/0x100 mm/kasan/report.c:595 memcmp+0x176/0x1d0 lib/string.c:683 uuid_equal include/linux/uuid.h:73 [inline] cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline] cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline] cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline] cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643 __cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline] cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7fdaf331ba79Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768 Add 'in_size' parameter to cxl_payload_from_user_allowed() and validatethe payload is large enough.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()There is a use-after-free error in cfg80211_shutdown_all_interfaces foundby syzkaller:BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014Workqueue: events cfg80211_rfkill_block_workCall Trace: dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 The problem arises due to the rfkill_block work is not cancelled when wiphyis being unregistered. In order to fix the issue cancel the correspondingwork in wiphy_unregister().Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xdp: produce a warning when calculated tailroom is negativeMany ethernet drivers report xdp Rx queue frag size as being the same asDMA write size. However, the only user of this field, namelybpf_xdp_frags_increase_tail(), clearly expects a truesize.Such difference leads to unspecific memory corruption issues under certaincircumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so whenrunning xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully usesall DMA-writable space in 2 buffers. This would be fine, if onlyrxq->frag_size was properly set to 4K, but value of 3K results in anegative tailroom, because there is a non-zero page offset.We are supposed to return -EINVAL and be done with it in such case, but dueto tailroom being stored as an unsigned int, it is reported to be somewherenear UINT_MAX, resulting in a tail being grown, even if the requestedoffset is too much (it is around 2K in the abovementioned test). This laterleads to all kinds of unspecific calltraces.[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000][ 7340.339230] in xskxceiver[42b5,400000+69000][ 7340.340300] likely on CPU 6 (core 0, socket 6)[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe[ 7340.340888] likely on CPU 3 (core 0, socket 3)[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0[ 7340.421237] PKRU: 55555554[ 7340.421623] Call Trace:[ 7340.421987] [ 7340.422309] ? softleaf_from_pte+0x77/0xa0[ 7340.422855] swap_pte_batch+0xa7/0x290[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270[ 7340.424102] zap_pte_range+0x281/0x580[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240[ 7340.425177] unmap_page_range+0x24d/0x420[ 7340.425714] unmap_vmas+0xa1/0x180[ 7340.426185] exit_mmap+0xe1/0x3b0[ 7340.426644] __mmput+0x41/0x150[ 7340.427098] exit_mm+0xb1/0x110[ 7340.427539] do_exit+0x1b2/0x460[ 7340.427992] do_group_exit+0x2d/0xc0[ 7340.428477] get_signal+0x79d/0x7e0[ 7340.428957] arch_do_signal_or_restart+0x34/0x100[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0[ 7340.430159] do_syscall_64+0x188/---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: io: Extract user memory type in ioremap_prot()The only caller of ioremap_prot() outside of the generic ioremap()implementation is generic_access_phys(), which passes a 'pgprot_t' valuedetermined from the user mapping of the target 'pfn' being accessed bythe kernel. On arm64, the 'pgprot_t' contains all of the non-addressbits from the pte, including the permission controls, and so we end upreturning a new user mapping from ioremap_prot() which faults whenaccessed from the kernel on systems with PAN: | Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000 | ... | Call trace: | __memcpy_fromio+0x80/0xf8 | generic_access_phys+0x20c/0x2b8 | __access_remote_vm+0x46c/0x5b8 | access_remote_vm+0x18/0x30 | environ_read+0x238/0x3e8 | vfs_read+0xe4/0x2b0 | ksys_read+0xcc/0x178 | __arm64_sys_read+0x4c/0x68Extract only the memory type from the user 'pgprot_t' in ioremap_prot()and assert that we're being passed a user mapping, to protect us againstany changes in future that may require additional handling. To avoidfalsely flagging users of ioremap(), provide our own ioremap() macrowhich simply wraps __ioremap_prot().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cxl: Fix race of nvdimm_bus object when creating nvdimm objectsFound issue during running of cxl-translate.sh unit test. Adding a 3ssleep right before the test seems to make the issue reproduce fairlyconsistently. The cxl_translate module has dependency on cxl_acpi andcauses orphaned nvdimm objects to reprobe after cxl_acpi is removed.The nvdimm_bus object is registered by the cxl_nvb object whencxl_acpi_probe() is called. With the nvdimm_bus object missing,__nd_device_register() will trigger NULL pointer dereference whenaccessing the dev->parent that points to &nvdimm_bus->dev.[ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c[ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025[ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core][ 192.899459] RIP: 0010:kobject_get+0xc/0x90[ 192.924871] Call Trace:[ 192.925959] [ 192.926976] ? pm_runtime_init+0xb9/0xe0[ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm][ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm][ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem][ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core][ 192.943349] really_probe+0xde/0x380This patch also relies on the previous change wheredevm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c insteadof drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem.1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the driver is probed synchronously when add_device() is called.2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the cxl_nvb driver is attached during cxl_acpi_probe().3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in devm_cxl_add_nvdimm() before checking nvdimm_bus is valid.4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe() will exit with -EBUSY.The removal of cxl_nvdimm devices should prevent any orphaned devicesfrom probing once the nvdimm_bus is gone.[ dj: Fixed 0-day reported kdoc issue. ][ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/efi: defer freeing of boot services memoryefi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODEand EFI_BOOT_SERVICES_DATA using memblock_free_late().There are two issue with that: memblock_free_late() should be used formemory allocated with memblock_alloc() while the memory reserved withmemblock_reserve() should be freed with free_reserved_area().More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=yefi_free_boot_services() is called before deferred initialization of thememory map is complete.Benjamin Herrenschmidt reports that this causes a leak of ~140MB ofRAM on EC2 t3a.nano instances which only have 512MB or RAM.If the freed memory resides in the areas that memory map for them isstill uninitialized, they won't be actually freed becausememblock_free_late() calls memblock_free_pages() and the latter skipsuninitialized pages.Using free_reserved_area() at this point is also problematic because__free_page() accesses the buddy of the freed page and that again mightend up in uninitialized part of the memory map.Delaying the entire efi_free_boot_services() could be problematicbecause in addition to freeing boot services memory it updatesefi.memmap without any synchronization and that's undesirable late inboot when there is concurrency.More robust approach is to only defer freeing of the EFI boot servicesmemory.Split efi_free_boot_services() in two. First efi_unmap_boot_services()collects ranges that should be freed into an array thenefi_free_boot_services() later frees them after deferred init is complete.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: bcm: fix locking for bcm_op runtime updatesCommit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")added a locking for some variables that can be modified at runtime whenupdating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().Usually the RX_SETUP only handles and filters incoming traffic with oneexception: When the RX_RTR_FRAME flag is set a predefined CAN frame issent when a specific RTR frame is received. Therefore the rx bcm_op usesbcm_can_tx() which uses the bcm_tx_lock that was only initialized inbcm_tx_setup(). Add the missing spin_lock_init() when allocating thebcm_op in bcm_rx_setup() to handle the RTR case properly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()Check frame length before accessing the mgmt fields inmt7925_mac_write_txwi_80211 in order to avoid a possible oob access.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: kalmia: validate USB endpointsThe kalmia driver should validate that the device it is probing has theproper number and types of USB endpoints it is expecting before it bindsto it. If a malicious device were to not have the same urbs the driverwill crash later on when it blindly accesses these endpoints.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: phy: register phy led_triggers during probe to avoid AB-BA deadlockThere is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV andLED_TRIGGER_PHY are enabled:[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c[ 1362.104022] [<80014504>] syscall_common+0x34/0x58Here LED_TRIGGER_PHY is registering LED triggers during phy_attachwhile holding RTNL and then taking triggers_list_lock.[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c[ 1362.232164] [<80014504>] syscall_common+0x34/0x58Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takestriggers_list_lock and then RTNL. A classical AB-BA deadlock.phy_led_triggers_registers() does not require the RTNL, it does notmake any calls into the network stack which require protection. Thereis also no requirement the PHY has been attached to a MAC, thetriggers only make use of phydev state. This allows the call tophy_led_triggers_registers() to be placed elsewhere. PHY probe() andrelease() don't hold RTNL, so solving the AB-BA deadlock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:platform/x86: dell-wmi-sysman: Don't hex dump plaintext password dataset_new_password() hex dumps the entire buffer, which contains plaintextpassword data, including current and new passwords. Remove the hex dumpto avoid leaking credentials.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: rawsock: cancel tx_work before socket teardownIn rawsock_release(), cancel any pending tx_work and purge the writequeue before orphaning the socket. rawsock_tx_work runs on the systemworkqueue and calls nfc_data_exchange which dereferences the NCIdevice. Without synchronization, tx_work can race with socket anddevice teardown when a process is killed (e.g. by SIGKILL), leadingto use-after-free or leaked references.Set SEND_SHUTDOWN first so that if tx_work is already running it willsee the flag and skip transmitting, then use cancel_work_sync to waitfor any in-progress execution to finish, and finally purge anyremaining queued skbs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_configThis triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expectedbehavior from the driver - other drivers default to 0 too.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blktrace: fix __this_cpu_read/write in preemptible contexttracing_record_cmdline() internally uses __this_cpu_read() and__this_cpu_write() on the per-CPU variable trace_cmdline_save, andtrace_save_cmdline() explicitly asserts preemption is disabled vialockdep_assert_preemption_disabled(). These operations are only safewhen preemption is off, as they were designed to be called from thescheduler context (probe_wakeup_sched_switch() / probe_wakeup()).__blk_add_trace() was calling tracing_record_cmdline(current) early inthe blk_tracer path, before ring buffer reservation, from processcontext where preemption is fully enabled. This triggers the followingusing blktests/blktrace/002:blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed] runtime 0.367s ... 0.437s something found in dmesg: [ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33 [ 81.239580] null_blk: disk nullb1 created [ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516 [ 81.362842] caller is tracing_record_cmdline+0x10/0x40 [ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full) [ 81.362877] Tainted: [N]=TEST [ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 81.362881] Call Trace: [ 81.362884] [ 81.362886] dump_stack_lvl+0x8d/0xb0 ... (See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message)[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33[ 81.239580] null_blk: disk nullb1 created[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516[ 81.362842] caller is tracing_record_cmdline+0x10/0x40[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)[ 81.362877] Tainted: [N]=TEST[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014[ 81.362881] Call Trace:[ 81.362884] [ 81.362886] dump_stack_lvl+0x8d/0xb0[ 81.362895] check_preemption_disabled+0xce/0xe0[ 81.362902] tracing_record_cmdline+0x10/0x40[ 81.362923] __blk_add_trace+0x307/0x5d0[ 81.362934] ? lock_acquire+0xe0/0x300[ 81.362940] ? iov_iter_extract_pages+0x101/0xa30[ 81.362959] blk_add_trace_bio+0x106/0x1e0[ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0[ 81.362979] ? lockdep_init_map_type+0x58/0x260[ 81.362988] submit_bio_wait+0x56/0x90[ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250[ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10[ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0[ 81.363051] blkdev_read_iter+0xc1/0x140[ 81.363059] vfs_read+0x20b/0x330[ 81.363083] ksys_read+0x67/0xe0[ 81.363090] do_syscall_64+0xbf/0xf00[ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e[ 81.363106] RIP: 0033:0x7f281906029d[ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec[ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000[ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d[ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000[ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000[ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000[ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a[ 81.363142] The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(),and blk_add_trace_rq() paths as well.The purpose of tracin---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet-fcloop: Check remoteport port_state before calling done callbackIn nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set whenremoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, thenvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected tofail and the nvme-fc transport layer itself will directly callnvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to freethe lsrsp resources.Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state.If online, then lsrsp->done callback will free the lsrsp. Else, return-ENODEV to signal the nvme-fc transport to handle freeing lsrsp.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ice: change XDP RxQ frag_size from DMA write length to xdp.frame_szThe only user of frag_size field in XDP RxQ info isbpf_xdp_frags_increase_tail(). It clearly expects whole buff size insteadof DMA write size. Different assumptions in ice driver configuration leadto negative tailroom.This allows to trigger kernel panic, when usingXDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to6912 and the requested offset to a huge value, e.g.XSK_UMEM__MAX_FRAME_SIZE * 100.Due to other quirks of the ZC configuration in ice, panic is not observedin ZC mode, but tailroom growing still fails when it should not.Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.Fix ZC mode too by using the new helper.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: ets: fix divide by zero in the offload pathOffloading ETS requires computing each class' WRR weight: this is done byaveraging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsignedint, the same integer size as the individual DRR quanta, can overflow andeven cause division by zero, like it happened in the following splat: Oops: divide error: 0000 [#1] SMP PTI CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Call Trace: ets_qdisc_change+0x870/0xf40 [sch_ets] qdisc_create+0x12b/0x540 tc_modify_qdisc+0x6d7/0xbd0 rtnetlink_rcv_msg+0x168/0x6b0 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x1d6/0x2b0 netlink_sendmsg+0x22e/0x470 ____sys_sendmsg+0x38a/0x3c0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x111/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f440b81c77e Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003 RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8 R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980 Modules linked in: sch_ets(E) netdevsim(E) ---[ end trace 0000000000000000 ]--- RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---Fix this using 64-bit integers for 'q_sum' and 'q_psum'.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing themIn commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference atraw event handle"), we handle the fact that raw event callbackscan happen even for a HID device that has not been "claimed" causing acrash if a broken device were attempted to be connected to the system.Fix up the remaining in-tree HID drivers that forgot to add this samecheck to resolve the same issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearingstruct bpf_plt contains a u64 target field. Currently, the BPF JITallocator requests an alignment of 4 bytes (sizeof(u32)) for the JITbuffer.Because the base address of the JIT buffer can be 4-byte aligned (e.g.,ending in 0x4 or 0xc), the relative padding logic in build_plt() failsto ensure that target lands on an 8-byte boundary.This leads to two issues:1. UBSAN reports misaligned-access warnings when dereferencing the structure.2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address.Fix this by increasing the allocation alignment requirement to 8 bytes(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base ofthe JIT buffer to an 8-byte boundary, allowing the relative padding mathin build_plt() to correctly align the target field.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPLIn DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDAbuffer cleanup path. It iterates num_bufs times and attempts to unmapentries in the dma array.This leads to two issues:1. The dma array shares storage with tx_qpl_buf_ids (union). Interpreting buffer IDs as DMA addresses results in attempting to unmap incorrect memory locations.2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed the size of the dma array, causing out-of-bounds access warnings(trace below is how we noticed this issue).UBSAN: array-index-out-of-bounds indrivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out ofrange for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')Workqueue: gve gve_service_task [gve]Call Trace:dump_stack_lvl+0x33/0xa0__ubsan_handle_out_of_bounds+0xdc/0x110gve_tx_stop_ring_dqo+0x182/0x200 [gve]gve_close+0x1be/0x450 [gve]gve_reset+0x99/0x120 [gve]gve_service_task+0x61/0x100 [gve]process_scheduled_works+0x1e9/0x380Fix this by properly checking for QPL mode and delegating togve_free_tx_qpl_bufs() to reclaim the buffers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ice: Fix memory leak in ice_set_ringparam()In ice_set_ringparam, tx_rings and xdp_rings are allocated beforerx_rings. If the allocation of rx_rings fails, the code jumps tothe done label leaking both tx_rings and xdp_rings. Furthermore, ifthe setup of an individual Rx ring fails during the loop, the code jumpsto the free_tx label which releases tx_rings but leaks xdp_rings.Fix this by introducing a free_xdp label and updating the error paths toensure both xdp_rings and tx_rings are properly freed if rx_ringsallocation or setup fails.Compile tested only. Issue found using a prototype static analysis tooland code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: xt_CT: drop pending enqueued packets on template removalTemplates refer to objects that can go away while packets are sitting innfqueue refer to:- helper, this can be an issue on module removal.- timeout policy, nfnetlink_cttimeout might remove it.The use of templates with zone and event cache filter are safe, sincethis just copies values.Flush these enqueued packets in case the template rule gets removed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/rds: Fix circular locking dependency in rds_tcp_tunesyzbot reported a circular locking dependency in rds_tcp_tune() wheresk_net_refcnt_upgrade() is called while holding the socket lock:======================================================WARNING: possible circular locking dependency detected======================================================kworker/u10:8/15040 is trying to acquire lock:ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0},at: __kmalloc_cache_noprof+0x4b/0x6f0but task is already holding lock:ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0},at: rds_tcp_tune+0xd7/0x930The issue occurs because sk_net_refcnt_upgrade() performs memoryallocation (via get_net_track() -> ref_tracker_alloc()) while thesocket lock is held, creating a circular dependency with fs_reclaim.Fix this by moving sk_net_refcnt_upgrade() outside the socket lockcritical section. This is safe because the fields modified by thesk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are notaccessed by any concurrent code path at this point.v2: - Corrected fixes tag - check patch line wrap nits - ai commentary nits
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: wlcore: Fix a locking bugMake sure that wl->mutex is locked before it is unlocked. This has beendetected by the Clang thread-safety analyzer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mvpp2: guard flow control update with global_tx_fc in buffer switchingmvpp2_bm_switch_buffers() unconditionally callsmvpp2_bm_pool_update_priv_fc() when switching between per-cpu andshared buffer pool modes. This function programs CM3 flow controlregisters via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereferencepriv->cm3_base without any NULL check.When the CM3 SRAM resource is not present in the device tree (thethird reg entry added by commit 60523583b07c ("dts: marvell: add CM3SRAM memory to cp11x ethernet device tree")), priv->cm3_base remainsNULL and priv->global_tx_fc is false. Any operation that triggersmvpp2_bm_switch_buffers(), for example an MTU change that crossesthe jumbo frame threshold, will crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits pc : readl+0x0/0x18 lr : mvpp2_cm3_read.isra.0+0x14/0x20 Call trace: readl+0x0/0x18 mvpp2_bm_pool_update_fc+0x40/0x12c mvpp2_bm_pool_update_priv_fc+0x94/0xd8 mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0 mvpp2_change_mtu+0x140/0x380 __dev_set_mtu+0x1c/0x38 dev_set_mtu_ext+0x78/0x118 dev_set_mtu+0x48/0xa8 dev_ifsioc+0x21c/0x43c dev_ioctl+0x2d8/0x42c sock_ioctl+0x314/0x378Every other flow control call site in the driver already guardshardware access with either priv->global_tx_fc or port->tx_fc.mvpp2_bm_switch_buffers() is the only place that omits this check.Add the missing priv->global_tx_fc guard to both the disable andre-enable calls in mvpp2_bm_switch_buffers(), consistent with therest of the driver.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=nWhen CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0(success) without actually creating a socket. Callers such asfou_create() then proceed to dereference the uninitialized socketpointer, resulting in a NULL pointer dereference.The captured NULL deref crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764) [...] Call Trace: genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209) [...] netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1)) __sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1)) __x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, socallers correctly take their error paths. There is only one caller ofthe vulnerable function and only privileged users can trigger it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Prevent concurrent access to IPSec ASO contextThe query or updating IPSec offload object is through Access ASO WQE.The driver uses a single mlx5e_ipsec_aso struct for each PF, whichcontains a shared DMA-mapped context for all ASO operations.A race condition exists because the ASO spinlock is released beforethe hardware has finished processing WQE. If a second operation isinitiated immediately after, it overwrites the shared context in theDMA area.When the first operation's completion is processed later, it readsthis corrupted context, leading to unexpected behavior and incorrectresults.This commit fixes the race by introducing a private context withineach IPSec offload object. The shared ASO context is now copied tothis private context while the ASO spinlock is held. Subsequentprocessing uses this saved, per-object context, ensuring its integrityis maintained.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failureieee80211_tx_prepare_skb() has three error paths, but only two of themfree the skb. The first error path (ieee80211_tx_prepare() returningTX_DROP) does not free it, while invoke_tx_handlers() failure and thefragmentation check both do.Add kfree_skb() to the first error path so all three are consistent,and remove the now-redundant frees in callers (ath9k, mt76,mac80211_hwsim) to avoid double-free.Document the skb ownership guarantee in the function's kdoc.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: aqc111: Do not perform PM inside suspend callbacksyzbot reports "task hung in rpm_resume"This is caused by aqc111_suspend callingthe PM variant of its write_cmd routine.The simplified call trace looks like this:rpm_suspend() usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING aqc111_suspend() - called for the usb device interface aqc111_write32_cmd() usb_autopm_get_interface() pm_runtime_resume_and_get() rpm_resume() - here we call rpm_resume() on our parent rpm_resume() - Here we wait for a status change that will never happen.At this point we block another task which holdsrtnl_lock and locks up the whole networking stack.Fix this by replacing the write_cmd calls with their _nopm variants
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Limit BO list entry count to prevent resource exhaustionUserspace can pass an arbitrary number of BO list entries via thebo_number field. Although the previous multiplication overflow checkprevents out-of-bounds allocation, a large number of entries could stillcause excessive memory allocation (up to potentially gigabytes) andunnecessarily long list processing times.Introduce a hard limit of 128k entries per BO list, which is more thansufficient for any realistic use case (e.g., a single list containing allbuffers in a large scene). This prevents memory exhaustion attacks andensures predictable performance.Return -EINVAL if the requested entry count exceeds the limit(cherry picked from commit 688b87d39e0aa8135105b40dc167d74b5ada5332)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In libexpat before 2.7.4, XML_ExternalEntityParserCreate does not copy unknown encoding handler user data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: Requests is a HTTP library. Prior to version 2.33.0, the `requests.utils.extract_zipped_paths()` utility function uses a predictable filename when extracting files from zip archives into the system temporary directory. If the target file already exists, it is reused without validation. A local attacker with write access to the temp directory could pre-create a malicious file that would be loaded in place of the legitimate one. Standard usage of the Requests library is not affected by this vulnerability. Only applications that call `extract_zipped_paths()` directly are impacted. Starting in version 2.33.0, the library extracts files to a non-deterministic location. If developers are unable to upgrade, they can set `TMPDIR` in their environment to a directory with restricted write access.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3-requests > 0-0 (version in image is 2.25.1-150300.3.21.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: atm: fix crash due to unvalidated vcc pointer in sigd_send()Reproducer available at [1].The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vccpointer from msg->vcc and uses it directly without any validation. Thispointer comes from userspace via sendmsg() and can be arbitrarily forged: int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0); ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon struct msghdr msg = { .msg_iov = &iov, ... }; *(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeefIn normal operation, the kernel sends the vcc pointer to the signalingdaemon via sigd_enq() when processing operations like connect(), bind(),or listen(). The daemon is expected to return the same pointer whenresponding. However, a malicious daemon can send arbitrary pointer values.Fix this by introducing find_get_vcc() which validates the pointer bysearching through vcc_hash (similar to how sigd_close() iterates overall VCCs), and acquires a reference via sock_hold() if found.Since struct atm_vcc embeds struct sock as its first member, they sharethe same lifetime. Therefore using sock_hold/sock_put is sufficient tokeep the vcc alive while it is being used.Note that there may be a race with sigd_close() which could mark the vccwith various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns.However, sock_hold() guarantees the memory remains valid, so this raceonly affects the logical state, not memory safety.[1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_expect: use expect->helperUse expect->helper in ctnetlink and /proc to dump the helper name.Using nfct_help() without holding a reference to the master conntrackis unsafe.Use exp->master->helper in ctnetlink path if userspace does not providean explicit helper when creating an expectation to retain the existingbehaviour. The ctnetlink expectation path holds the reference on themaster conntrack and nf_conntrack_expect lock and the nfnetlink gluepath refers to the master ct that is attached to the skb.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ipset: drop logically empty buckets in mtype_delmtype_del() counts empty slots below n->pos in k, but it only drops thebucket when both n->pos and k are zero. This misses buckets whose liveentries have all been removed while n->pos still points past deleted slots.Treat a bucket as empty when all positions below n->pos are unused andrelease it directly instead of shrinking it further.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bridge: mrp: reject zero test interval to avoid OOM panicbr_mrp_start_test() and br_mrp_start_in_test() accept the user-suppliedinterval value from netlink without validation. When interval is 0,usecs_to_jiffies(0) yields 0, causing the delayed work(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to rescheduleitself with zero delay. This creates a tight loop on system_percpu_wqthat allocates and transmits MRP test frames at maximum rate, exhaustingall system memory and causing a kernel panic via OOM deadlock.The same zero-interval issue applies to br_mrp_start_in_test_parse()for interconnect test frames.Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for bothIFLA_BRIDGE_MRP_START_TEST_INTERVAL andIFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at thenetlink attribute parsing layer before the value ever reaches theworkqueue scheduling code. This is consistent with how other bridgesubsystems (br_fdb, br_mst) enforce range constraints on netlinkattributes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: cls_fw: fix NULL pointer dereference on shared blocksThe old-method path in fw_classify() calls tcf_block_q() anddereferences q->handle. Shared blocks leave block->q NULL, causing aNULL deref when an empty cls_fw filter is attached to a shared blockand a packet with a nonzero major skb mark is classified.Reject the configuration in fw_change() when the old method (noTCA_OPTIONS) is used on a shared block, since fw_classify()'sold-method path needs block->q which is NULL for shared blocks.The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: cls_flow: fix NULL pointer dereference on shared blocksflow_change() calls tcf_block_q() and dereferences q->handle to derivea default baseclass. Shared blocks leave block->q NULL, causing a NULLderef when a flow filter without a fully qualified baseclass is createdon a shared block.Check tcf_block_shared() before accessing block->q and return -EINVALfor shared blocks. This avoids the null-deref shown below:=======================================================================KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]RIP: 0010:flow_change (net/sched/cls_flow.c:508)Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...]=======================================================================
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_hfsc: fix divide-by-zero in rtsc_min()m2sm() converts a u32 slope to a u64 scaled value. For large inputs(e.g. m1=4000000000), the result can reach 2^32. rtsc_min() storesthe difference of two such u64 values in a u32 variable `dsm` anduses it as a divisor. When the difference is exactly 2^32 thetruncation yields zero, causing a divide-by-zero oops in theconcave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...]Widen `dsm` to u64 and replace do_div() with div64_u64() so the fulldifference is preserved.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARPWeiming Shi says:xt_match and xt_target structs registered with NFPROTO_UNSPEC can beloaded by any protocol family through nft_compat. When such amatch/target sets .hooks to restrict which hooks it may run on, thebitmask uses NF_INET_* constants. This is only correct for familieswhose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridgeall share the same five hooks (PRE_ROUTING ... POST_ROUTING).ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with differentsemantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooksvalidation silently passes for the wrong reasons, allowing matches torun on ARP chains where the hook assumptions (e.g. state->in beingset on input hooks) do not hold. This leads to NULL pointerdereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) Kernel panic - not syncing: Fatal exception in interruptFix it by restricting arptables to NFPROTO_ARP extensions only.Note that arptables-legacy only supports:- arpt_CLASSIFY- arpt_mangle- arpt_MARKthat provide explicit NFPROTO_ARP match/target declarations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rds: ib: reject FRMR registration before IB connection is establishedrds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_dataand passes it to rds_ib_reg_frmr() for FRWR memory registration. On afresh outgoing connection, ic is allocated in rds_ib_conn_alloc() withi_cm_id = NULL because the connection worker has not yet calledrds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() withRDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parsesthe control message before any connection establishment, allowingrds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash thekernel.The existing guard in rds_ib_reg_frmr() only checks for !ic (added incommit 9e630bcb7701), which does not catch this case since ic is allocatedearly and is always non-NULL once the connection object exists. KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920 Call Trace: rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167) rds_ib_map_frmr (net/rds/ib_frmr.c:252) rds_ib_reg_frmr (net/rds/ib_frmr.c:430) rds_ib_get_mr (net/rds/ib_rdma.c:615) __rds_rdma_map (net/rds/rdma.c:295) rds_cmsg_rdma_map (net/rds/rdma.c:860) rds_sendmsg (net/rds/send.c:1363) ____sys_sendmsg do_syscall_64Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are allnon-NULL before proceeding with FRMR registration, mirroring the guardalready present in rds_ib_post_inv(). Return -ENODEV when the connectionis not ready, which the existing error handling in rds_cmsg_send() convertsto -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() tostart the connection worker.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD__build_packet_message() manually constructs the NFULA_PAYLOAD netlinkattribute using skb_put() and skb_copy_bits(), bypassing the standardnla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytesare allocated (including NLA alignment padding), only data_len bytesof actual packet data are copied. The trailing nla_padlen(data_len)bytes (1-3 when data_len is not 4-byte aligned) are never initialized,leaking stale heap contents to userspace via the NFLOG netlink socket.Replace the manual attribute construction with nla_reserve(), whichhandles the tailroom check, header setup, and padding zeroing via__nla_reserve(). The subsequent skb_copy_bits() fills in the payloaddata on top of the properly initialized attribute.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: skb: fix cross-cache free of KFENCE-allocated skb headSKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2value (e.g. 704 on x86_64) to avoid collisions with generic kmallocbucket sizes. This ensures that skb_kfree_head() can reliably useskb_end_offset to distinguish skb heads allocated fromskb_small_head_cache vs. generic kmalloc caches.However, when KFENCE is enabled, kfence_ksize() returns the exactrequested allocation size instead of the slab bucket size. If a caller(e.g. bpf_test_init) allocates skb head data via kzalloc() and therequested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, thenslab_build_skb() -> ksize() returns that exact value. After subtractingskb_shared_info overhead, skb_end_offset ends up matchingSKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly freethe object to skb_small_head_cache instead of back to the originalkmalloc cache, resulting in a slab cross-cache free: kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected skbuff_small_head but got kmalloc-1kFix this by always calling kfree(head) in skb_kfree_head(). This keepsthe free path generic and avoids allocator-specific misclassificationfor KFENCE objects.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: xilinx: xdma: Fix regmap init error handlingdevm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.Fix the error check and also fix the error message. Use the error codefrom ERR_PTR() instead of the wrong value in ret.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: fix use-after-free and NULL deref in smb_grant_oplock()smb_grant_oplock() has two issues in the oplock publication sequence:1) opinfo is linked into ci->m_op_list (via opinfo_add) before add_lease_global_list() is called. If add_lease_global_list() fails (kmalloc returns NULL), the error path frees the opinfo via __free_opinfo() while it is still linked in ci->m_op_list. Concurrent m_op_list readers (opinfo_get_list, or direct iteration in smb_break_all_levII_oplock) dereference the freed node.2) opinfo->o_fp is assigned after add_lease_global_list() publishes the opinfo on the global lease list. A concurrent find_same_lease_key() can walk the lease list and dereference opinfo->o_fp->f_ci while o_fp is still NULL.Fix by restructuring the publication sequence to eliminate post-publishfailure:- Set opinfo->o_fp before any list publication (fixes NULL deref).- Preallocate lease_table via alloc_lease_table() before opinfo_add() so add_lease_global_list() becomes infallible after publication.- Keep the original m_op_list publication order (opinfo_add before lease list) so concurrent opens via same_client_has_lease() and opinfo_get_list() still see the in-flight grant.- Use opinfo_put() instead of __free_opinfo() on err_out so that the RCU-deferred free path is used.This also requires splitting add_lease_global_list() to take apreallocated lease_table and changing its return type from int to void,since it can no longer fail.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: reject mount if bigalloc with s_first_data_block != 0bigalloc with s_first_data_block != 0 is not supported, reject mountingit.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: validate p_idx bounds in ext4_ext_correct_indexesext4_ext_correct_indexes() walks up the extent tree correctingindex entries when the first extent in a leaf is modified. Beforeaccessing path[k].p_idx->ei_block, there is no validation thatp_idx falls within the valid range of index entries for thatlevel.If the on-disk extent header contains a corrupted or craftedeh_entries value, p_idx can point past the end of the allocatedbuffer, causing a slab-out-of-bounds read.Fix this by validating path[k].p_idx against EXT_LAST_INDEX() atboth access sites: before the while loop and inside it. Return-EFSCORRUPTED if the index pointer is out of range, consistentwith how other bounds violations are handled in the ext4 extenttree code.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: publish jinode after initializationext4_inode_attach_jinode() publishes ei->jinode to concurrent users.It used to set ei->jinode before jbd2_journal_init_jbd_inode(),allowing a reader to observe a non-NULL jinode with i_vfs_inodestill unset.The fast commit flush path can then pass this jinode tojbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping andmay crash.Below is the crash I observe:```BUG: unable to handle page fault for address: 000000010beb47f4PGD 110e51067 P4D 110e51067 PUD 0Oops: Oops: 0000 [#1] SMP NOPTICPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014RIP: 0010:xas_find_marked+0x3d/0x2e0Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ecR10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0PKRU: 55555554Call Trace:filemap_get_folios_tag+0x87/0x2a0__filemap_fdatawait_range+0x5f/0xd0? srso_alias_return_thunk+0x5/0xfbef5? __schedule+0x3e7/0x10c0? srso_alias_return_thunk+0x5/0xfbef5? srso_alias_return_thunk+0x5/0xfbef5? srso_alias_return_thunk+0x5/0xfbef5? preempt_count_sub+0x5f/0x80? srso_alias_return_thunk+0x5/0xfbef5? cap_safe_nice+0x37/0x70? srso_alias_return_thunk+0x5/0xfbef5? preempt_count_sub+0x5f/0x80? srso_alias_return_thunk+0x5/0xfbef5filemap_fdatawait_range_keep_errors+0x12/0x40ext4_fc_commit+0x697/0x8b0? ext4_file_write_iter+0x64b/0x950? srso_alias_return_thunk+0x5/0xfbef5? preempt_count_sub+0x5f/0x80? srso_alias_return_thunk+0x5/0xfbef5? vfs_write+0x356/0x480? srso_alias_return_thunk+0x5/0xfbef5? preempt_count_sub+0x5f/0x80ext4_sync_file+0xf7/0x370do_fsync+0x3b/0x80? syscall_trace_enter+0x108/0x1d0__x64_sys_fdatasync+0x16/0x20do_syscall_64+0x62/0x2c0entry_SYSCALL_64_after_hwframe+0x76/0x7e...```Fix this by initializing the jbd2_inode first.Use smp_wmb() and WRITE_ONCE() to publish ei->jinode afterinitialization. Readers use READ_ONCE() to fetch the pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: replace BUG_ON with proper error handling in ext4_read_inline_folioReplace BUG_ON() with proper error handling when inline data sizeexceeds PAGE_SIZE. This prevents kernel panic and allows the system tocontinue running while properly reporting the filesystem corruption.The error is logged via ext4_error_inode(), the buffer head is releasedto prevent memory leak, and -EFSCORRUPTED is returned to indicatefilesystem corruption.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: convert inline data to extents when truncate exceeds inline sizeAdd a check in ext4_setattr() to convert files from inline data storageto extent-based storage when truncate() grows the file size beyond theinline capacity. This prevents the filesystem from entering aninconsistent state where the inline data flag is set but the file sizeexceeds what can be stored inline.Without this fix, the following sequence causes a kernel BUG_ON():1. Mount filesystem with inode that has inline flag set and small size2. truncate(file, 50MB) - grows size but inline flag remains set3. sendfile() attempts to write data4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)The crash occurs because ext4_write_inline_data() expects inline storageto accommodate the write, but the actual inline capacity (~60 bytes fori_block + ~96 bytes for xattrs) is far smaller than the file size andwrite request.The fix checks if the new size from setattr exceeds the inode's actualinline capacity (EXT4_I(inode)->i_inline_size) and converts the file toextent-based storage before proceeding with the size change.This addresses the root cause by ensuring the inline data flag and filesize remain consistent during truncate operations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: avoid dereferencing log items after push callbacksAfter xfsaild_push_item() calls iop_push(), the log item may have beenfreed if the AIL lock was dropped during the push. Background inodereclaim or the dquot shrinker can free the log item while the AIL lockis not held, and the tracepoints in the switch statement dereferencethe log item after iop_push() returns.Fix this by capturing the log item type, flags, and LSN before callingxfsaild_push_item(), and introducing a new xfs_ail_push_class traceevent class that takes these pre-captured values and the ailp pointerinstead of the log item pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: save ailp before dropping the AIL lock in push callbacksIn xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lockis dropped to perform buffer IO. Once the cluster buffer no longerprotects the log item from reclaim, the log item may be freed bybackground reclaim or the dquot shrinker. The subsequent spin_lock()call dereferences lip->li_ailp, which is a use-after-free.Fix this by saving the ailp pointer in a local variable while the AILlock is held and the log item is guaranteed to be valid.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: stop reclaim before pushing AIL during unmountThe unmount sequence in xfs_unmount_flush_inodes() pushed the AIL whilebackground reclaim and inodegc are still running. This is brokenindependently of any use-after-free issues - background reclaim andinodegc should not be running while the AIL is being pushed duringunmount, as inodegc can dirty and insert inodes into the AIL during theflush, and background reclaim can race to abort and free dirty inodes.Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel backgroundreclaim before pushing the AIL. Stop inodegc before cancellingm_reclaim_work because the inodegc worker can re-queue m_reclaim_workvia xfs_inodegc_set_reclaimable.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/damon/sysfs: check contexts->nr before accessing contexts_arr[0]Multiple sysfs command paths dereference contexts_arr[0] without firstverifying that kdamond->contexts->nr == 1. A user can set nr_contexts to0 via sysfs while DAMON is running, causing NULL pointer dereferences.In more detail, the issue can be triggered by privileged users likebelow.First, start DAMON and make contexts directory empty(kdamond->contexts->nr == 0). # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/nr_contextsThen, each of below commands will cause the NULL pointer dereference. # echo update_schemes_stats > state # echo update_schemes_tried_regions > state # echo update_schemes_tried_bytes > state # echo update_schemes_effective_quotas > state # echo update_tuned_intervals > stateGuard all commands (except OFF) at the entry point ofdamon_sysfs_handle_cmd().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: prevent immediate PASID reuse casePASID resue could cause interrupt issue when processimmediately runs into hw state left by previousprocess exited with the same PASID, it's possible thatpage faults are still pending in the IH ring buffer whenthe process exits and frees up its PASID. To prevent thecase, it uses idr cyclic allocator same as kernel pid's.(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: add GFP_NOIO in the bio completion if neededThe bio completion path in the process context (e.g. dm-verity)will directly call into decompression rather than trigger anotherworkqueue context for minimal scheduling latencies, which canthen call vm_map_ram() with GFP_KERNEL.Due to insufficient memory, vm_map_ram() may generate memoryswapping I/O, which can cause submit_bio_wait to deadlockin some scenarios.Trimmed down the call stack, as follows:f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!!Use memalloc_noio_{save,restore}() to wrap up this path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: isotp: fix tx.buf use-after-free in isotp_sendmsg()isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize accessto so->tx.buf. isotp_release() waits for ISOTP_IDLE viawait_event_interruptible() and then calls kfree(so->tx.buf).If a signal interrupts the wait_event_interruptible() inside close()while tx.state is ISOTP_SENDING, the loop exits early and releaseproceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf)while sendmsg may still be reading so->tx.buf for the final CAN framein isotp_fill_dataframe().The so->tx.buf can be allocated once when the standard tx.buf length needsto be extended. Move the kfree() of this potentially extended tx.buf tosk_destruct time when either isotp_sendmsg() and isotp_release() are done.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: do not expire session on binding failureWhen a multichannel session binding request fails (e.g. wrong password),the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED.However, during binding, sess points to the target session looked up viaksmbd_session_lookup_slowpath() -- which belongs to another connection'suser. This allows a remote attacker to invalidate any active session bysimply sending a binding request with a wrong password (DoS).Fix this by skipping session expiration when the failed request wasa binding attempt, since the session does not belong to the currentconnection. The reference taken by ksmbd_session_lookup_slowpath() isstill correctly released via ksmbd_user_session_put().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: spi-fsl-lpspi: fix teardown order issue (UAF)There is a teardown order issue in the driver. The SPI controller isregistered using devm_spi_register_controller(), which delaysunregistration of the SPI controller until after the fsl_lpspi_remove()function returns.As the fsl_lpspi_remove() function synchronously tears down the DMAchannels, a running SPI transfer triggers the following NULL pointerdereference due to use after free:| fsl_lpspi 42550000.spi: I/O Error in DMA RX| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000[...]| Call trace:| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]| spi_transfer_one_message+0x49c/0x7c8| __spi_pump_transfer_message+0x120/0x420| __spi_sync+0x2c4/0x520| spi_sync+0x34/0x60| spidev_message+0x20c/0x378 [spidev]| spidev_ioctl+0x398/0x750 [spidev][...]Switch from devm_spi_register_controller() to spi_register_controller() infsl_lpspi_probe() and add the corresponding spi_unregister_controller() infsl_lpspi_remove().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hwmon: (pmbus/core) Protect regulator operations with mutexThe regulator operations pmbus_regulator_get_voltage(),pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()access PMBus registers and shared data but were not protected bythe update_lock mutex. This could lead to race conditions.However, adding mutex protection directly to these functions causesa deadlock because pmbus_regulator_notify() (which callsregulator_notifier_call_chain()) is often called with the mutexalready held (e.g., from pmbus_fault_handler()). If a regulatorcallback then calls one of the now-protected voltage functions,it will attempt to acquire the same mutex.Rework pmbus_regulator_notify() to utilize a worker function tosend notifications outside of the mutex protection. Events arestored as atomics in a per-page bitmask and processed by the worker.Initialize the worker and its associated data during regulatorregistration, and ensure it is cancelled on device removal usingdevm_add_action_or_reset().While at it, remove the unnecessary include of linux/of.h.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/irdma: Harden depth calculation functionsAn issue was exposed where OS can pass in U32_MAX for SQ/RQ/SRQ size.This can cause integer overflow and truncation of SQ/RQ/SRQ depthreturning a success when it should have failed.Harden the functions to do all depth calculations and boundarychecking in u64 sizes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/irdma: Initialize free_qp completion before using itIn irdma_create_qp, if ib_copy_to_udata fails, it will callirdma_destroy_qp to clean up which will attempt to wait onthe free_qp completion, which is not initialized yet. Fix thisby initializing the completion before the ib_copy_to_udata call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ctnetlink: use netlink policy range checksReplace manual range and mask validations with netlink policyannotations in ctnetlink code paths, so that the netlink core rejectsinvalid values early and can generate extack errors.- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at policy level, removing the manual >= TCP_CONNTRACK_MAX check.- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE (14). The normal TCP option parsing path already clamps to this value, but the ctnetlink path accepted 0-255, causing undefined behavior when used as a u32 shift count.- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with CTA_FILTER_F_ALL, removing the manual mask checks.- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding a new mask define grouping all valid expect flags.Extracted from a broader nf-next patch by Florian Westphal, scoped toctnetlink for the fixes tree.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btusb: clamp SCO altsetting table indicesbtusb_work() maps the number of active SCO links to USB alternatesettings through a three-entry lookup table when CVSD traffic usestransparent voice settings. The lookup currently indexes alts[] withdata->sco_num - 1 without first constraining sco_num to the number ofavailable table entries.While the table only defines alternate settings for up to three SCOlinks, data->sco_num comes from hci_conn_num() and is used directly.Cap the lookup to the last table entry before indexing it so thedriver keeps selecting the highest supported alternate setting withoutreading past alts[].
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix null-ptr-deref on l2cap_sock_ready_cbBefore using sk pointer, check if it is null.Fix the following: KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267] CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025 Workqueue: events l2cap_info_timeout RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce veth0_macvtap: entered promiscuous mode RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0 PKRU: 55555554 Call Trace: __kasan_check_byte+0x12/0x40 lock_acquire+0x79/0x2e0 lock_sock_nested+0x48/0x100 ? l2cap_sock_ready_cb+0x46/0x160 l2cap_sock_ready_cb+0x46/0x160 l2cap_conn_start+0x779/0xff0 ? __pfx_l2cap_conn_start+0x10/0x10 ? l2cap_info_timeout+0x60/0xa0 ? __pfx___mutex_lock+0x10/0x10 l2cap_info_timeout+0x68/0xa0 ? process_scheduled_works+0xa8d/0x18c0 process_scheduled_works+0xb6e/0x18c0 ? __pfx_process_scheduled_works+0x10/0x10 ? assign_work+0x3d5/0x5e0 worker_thread+0xa53/0xfc0 kthread+0x388/0x470 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x51e/0xb90 ? __pfx_ret_from_fork+0x10/0x10 veth1_macvtap: entered promiscuous mode ? __switch_to+0xc7d/0x1450 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Modules linked in: ---[ end trace 0000000000000000 ]--- batman_adv: batadv0: Interface activated: batadv_slave_0 batman_adv: batadv0: Interface activated: batadv_slave_1 netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0 netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0 RIP: 0010:kasan_byte_accessible+0x12/0x30 Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce ieee80211 phy39: Selected rate control algorithm 'minstrel_ht' RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001 RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000 R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_completeThis fixes the condition checking so mgmt_pending_valid is executedwhenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)would kfree(cmd) without unlinking it from the list first, leaving adangling pointer. Any subsequent list traversal (e.g.,mgmt_pending_foreach during __mgmt_power_off, or anothermgmt_pending_valid call) would dereference freed memory.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol createWe have recently observed a number of subvolumes with broken dentries.ls-ing the parent dir looks like:drwxrwxrwt 1 root root 16 Jan 23 16:49 .drwxr-xr-x 1 root root 24 Jan 23 16:48 ..d????????? ? ? ? ? ? broken_subvoland similarly stat-ing the file fails.In this state, deleting the subvol fails with ENOENT, but attempting tocreate a new file or subvol over it errors out with EEXIST and evenaborts the fs. Which leaves us a bit stuck.dmesg contains a single notable error message reading:"could not do orphan cleanup -2"2 is ENOENT and the error comes from the failure handling path ofbtrfs_orphan_cleanup(), with the stack leading back up tobtrfs_lookup().btrfs_lookupbtrfs_lookup_dentrybtrfs_orphan_cleanup // prints that message and returns -ENOENTAfter some detailed inspection of the internal state, it became clearthat:- there are no orphan items for the subvol- the subvol is otherwise healthy looking, it is not half-deleted or anything, there is no drop progress, etc.- the subvol was created a while ago and does the meaningful first btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much later.- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT, which results in a negative dentry for the subvolume via d_splice_alias(NULL, dentry), leading to the observed behavior. The bug can be mitigated by dropping the dentry cache, at which point we can successfully delete the subvolume if we want.i.e.,btrfs_lookup() btrfs_lookup_dentry() if (!sb_rdonly(inode->vfs_inode)->vfs_inode) btrfs_orphan_cleanup(sub_root) test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) btrfs_search_slot() // finds orphan item for inode N ... prints "could not do orphan cleanup -2" if (inode == ERR_PTR(-ENOENT)) inode = NULL; return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolumebtrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)on the root when it runs, so it cannot run more than once on a givenroot, so something else must run concurrently. However, the obviousroutes to deleting an orphan when nlinks goes to 0 should not be able torun without first doing a lookup into the subvolume, which should runbtrfs_orphan_cleanup() and set the bit.The final important observation is that create_subvol() callsd_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so ifthe dentry cache gets dropped, the next lookup into the subvolume willmake a real call into btrfs_orphan_cleanup() for the first time. Thisopens up the possibility of concurrently deleting the inode/orphan itemsbut most typical evict() paths will be holding a reference on the parentdentry (child dentry holds parent->d_lockref.count via dget ind_alloc(), released in __dentry_kill()) and prevent the parent frombeing removed from the dentry cache.The one exception is delayed iputs. Ordered extent creation callsigrab() on the inode. If the file is unlinked and closed while thoserefs are held, iput() in __dentry_kill() decrements i_count but doesnot trigger eviction (i_count > 0). The child dentry is freed and thesubvol dentry's d_lockref.count drops to 0, making it evictable whilethe inode is still alive.Since there are two races (the race between writeback and unlink andthe race between lookup and delayed iputs), and there are too many movingparts, the following three diagrams show the complete picture.(Only the second and third are races)Phase 1:Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP setbtrfs_mksubvol() lookup_one_len() __lookup_slow() d_alloc_parallel() __d_alloc() // d_lockref.count = 1 create_subvol(dentry) // doesn't touch the bit.. d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme-pci: ensure we're polling a polled queueA user can change the polled queue count at run time. There's a briefwindow during a reset where a hipri task may try to poll that queuebefore the block layer has updated the queue maps, which would race withthe now interrupt driven queue and may cause double completions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()When querying a nexthop object via RTM_GETNEXTHOP, the kernel currentlyallocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient forsingle nexthops and small Equal-Cost Multi-Path groups, this fixedallocation fails for large nexthop groups like 512 nexthops.This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by allocating the size dynamically using nh_nlmsg_size() andusing nlmsg_new(), this is consistent with nexthop_notify() behavior. Inaddition, adjust nh_nlmsg_size_grp() so it calculates the size neededbased on flags passed. While at it, also add the size of NHA_FDB fornexthop group size calculation as it was missing too.This cannot be reproduced via iproute2 as the group size is currentlylimited and the command fails as follows:addattr_l ERROR: message exceeded bound of 1048
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/i915/gt: Check set_default_submission() before deferencingWhen the i915 driver firmware binaries are not present, theset_default_submission pointer is not set. This pointer isdereferenced during suspend anyways.Add a check to make sure it is set before dereferencing.[ 23.289926] PM: suspend entry (deep)[ 23.293558] Filesystems sync: 0.000 seconds[ 23.298010] Freezing user space processes[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)[ 23.309766] OOM killer disabled.[ 23.313027] Freezing remaining freezable tasks[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)[ 23.342038] serial 00:05: disabled[ 23.345719] serial 00:02: disabled[ 23.349342] serial 00:01: disabled[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache[ 23.361635] ata1.00: Entering standby power mode[ 23.368863] ata2.00: Entering standby power mode[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000[ 23.452194] #PF: supervisor instruction fetch in kernel mode[ 23.457896] #PF: error_code(0x0010) - not-present page[ 23.463065] PGD 0 P4D 0[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN[ 23.496511] Workqueue: async async_run_entry_fn[ 23.501087] RIP: 0010:0x0[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0[ 23.572539] PKRU: 55555554[ 23.575281] Call Trace:[ 23.577770] [ 23.579905] intel_engines_reset_default_submission+0x42/0x60[ 23.585695] __intel_gt_unset_wedged+0x191/0x200[ 23.590360] intel_gt_unset_wedged+0x20/0x40[ 23.594675] gt_sanitize+0x15e/0x170[ 23.598290] i915_gem_suspend_late+0x6b/0x180[ 23.602692] i915_drm_suspend_late+0x35/0xf0[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10[ 23.611843] dpm_run_callback+0x78/0x1c0[ 23.615817] device_suspend_late+0xde/0x2e0[ 23.620037] async_suspend_late+0x18/0x30[ 23.624082] async_run_entry_fn+0x25/0xa0[ 23.628129] process_one_work+0x15b/0x380[ 23.632182] worker_thread+0x2a5/0x3c0[ 23.635973] ? __pfx_worker_thread+0x10/0x10[ 23.640279] kthread+0xf6/0x1f0[ 23.643464] ? __pfx_kthread+0x10/0x10[ 23.647263] ? __pfx_kthread+0x10/0x10[ 23.651045] ret_from_fork+0x131/0x190[ 23.654837] ? __pfx_kthread+0x10/0x10[ 23.658634] ret_from_fork_asm+0x1a/0x30[ 23.662597] [ 23.664826] Modules linked in:[ 23.667914] CR2: 0000000000000000[ 23.671271] ------------[ cut here ]------------(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFC: nxp-nci: allow GPIOs to sleepAllow the firmware and enable GPIOs to sleep.This fixes a `WARN_ON' and allows the driver to operate GPIOs which areconnected to I2C GPIO expanders.-- >8 --kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98-- >8 --
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bonding: fix NULL deref in bond_debug_rlb_hash_showrlb_clear_slave intentionally keeps RLB hash-table entries onthe rx_hashtbl_used_head list with slave set to NULL when noreplacement slave is available. However, bond_debug_rlb_hash_showvisites client_info->slave without checking if it's NULL.Other used-list iterators in bond_alb.c already handle this NULL-slavestate safely:- rlb_update_client returns early on !client_info->slave- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalancecompare slave values before visiting- lb_req_update_subnet_clients continues if slave is NULLThe following NULL deref crash can be trigger inbond_debug_rlb_hash_show:[ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000[ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41)[ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286[ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204[ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078[ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000[ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0[ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8[ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000[ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0[ 1.295897] Call Trace:[ 1.296134] seq_read_iter (fs/seq_file.c:231)[ 1.296341] seq_read (fs/seq_file.c:164)[ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1))[ 1.296658] vfs_read (fs/read_write.c:572)[ 1.296981] ksys_read (fs/read_write.c:717)[ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))[ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)Add a NULL check and print "(none)" for entries with no assigned slave.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_downWhen the nl80211 socket that originated a PMSR request isclosed, cfg80211_release_pmsr() sets the request's nl_portidto zero and schedules pmsr_free_wk to process the abortasynchronously. If the interface is concurrently torn downbefore that work runs, cfg80211_pmsr_wdev_down() callscfg80211_pmsr_process_abort() directly. However, the already-scheduled pmsr_free_wk work item remains pending and may runafter the interface has been removed from the driver. Thiscould cause the driver's abort_pmsr callback to operate on atorn-down interface, leading to undefined behavior andpotential crashes.Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()before calling cfg80211_pmsr_process_abort(). This ensures anypending or in-progress work is drained before interface teardownproceeds, preventing the work from invoking the driver abortcallback after the interface is gone.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: cp2615: fix serial string NULL-deref at probeThe cp2615 driver uses the USB device serial string as the i2c adaptername but does not make sure that the string exists.Verify that the device has a serial number before accessing it to avoidtriggering a NULL-pointer dereference (e.g. with malicious devices).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]The problem is that aql_enable_write() does not serialise concurrentwrite()s to the debugfs.aql_enable_write() checks static_key_false(&aql_disable.key) andlater calls static_branch_inc() or static_branch_dec(), but thestate may change between the two calls.aql_disable does not need to track inc/dec.Let's use static_branch_enable() and static_branch_disable().[0]:val == 0WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288Modules linked in:CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)Tainted: [U]=USER, [L]=SOFTLOCKUPHardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000aR13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0Call Trace: __static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline] __static_key_slow_dec kernel/jump_label.c:321 [inline] static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336 aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343 short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383 vfs_write+0x2aa/0x1070 fs/read_write.c:684 ksys_pwrite64 fs/read_write.c:793 [inline] __do_sys_pwrite64 fs/read_write.c:801 [inline] __se_sys_pwrite64 fs/read_write.c:798 [inline] __x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f530cf9aeb9Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet: move async event work off nvmet-wqFor target nvmet_ctrl_free() flushes ctrl->async_event_work.If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueuecompletion for the same worker:-A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work)B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work()C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2ndLockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390Move async event work to a dedicated nvmet-aen-wq to avoid reentrantflush on nvmet-wq.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/irdma: Fix deadlock during netdev reset with active connectionsResolve deadlock that occurs when user executes netdev reset while RDMAapplications (e.g., rping) are active. The netdev reset causes icedriver to remove irdma auxiliary driver, triggering device_delete andsubsequent client removal. During client removal, uverbs_client waitsfor QP reference count to reach zero while cma_client holds the finalreference, creating circular dependency and indefinite wait in iWARPmode. Skip QP reference count wait during device reset to preventdeadlock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ibamdgpu_amdkfd_submit_ib() submits a GPU job and gets a fencefrom amdgpu_ib_schedule(). This fence is used to wait for jobcompletion.Currently, the code drops the fence reference using dma_fence_put()before calling dma_fence_wait().If dma_fence_put() releases the last reference, the fence may befreed before dma_fence_wait() is called. This can lead to ause-after-free.Fix this by waiting on the fence first and releasing the referenceonly after dma_fence_wait() completes.Fixes the below:drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)(cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exitwg_netns_pre_exit() manually acquires rtnl_lock() inside thepernet .pre_exit callback. This causes a hung task when anotherthread holds rtnl_mutex - the cleanup_net workqueue (or thesetup_net failure rollback path) blocks indefinitely inwg_netns_pre_exit() waiting to acquire the lock.Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:Add ->exit_rtnl() hook to struct pernet_operations."), where theframework already holds RTNL and batches all callbacks under asingle rtnl_lock()/rtnl_unlock() pair, eliminating the contentionwindow.The rcu_assign_pointer(wg->creating_net, NULL) is safe to movefrom .pre_exit to .exit_rtnl (which runs after synchronize_rcu())because all RCU readers of creating_net either use maybe_get_net()- which returns NULL for a dying namespace with zero refcount - oraccess net->user_ns which remains valid throughout the entireops_undo_list sequence.[ Jason: added __net_exit and __read_mostly annotations that were missing. ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGIONDrop the WARN in sev_pin_memory() on npages overflowing an int, as theWARN is comically trivially to trigger from userspace, e.g. by doing: struct kvm_enc_region range = { .addr = 0, .size = -1ul, }; __vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range);Note, the checks in sev_mem_enc_register_region() that presumably exist toverify the incoming address+size are completely worthless, as both "addr"and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greaterthan ULONG_MAX. That wart will be cleaned up in the near future. if (range->addr > ULONG_MAX || range->size > ULONG_MAX) return -EINVAL;Opportunistically add a comment to explain why the code calculates thenumber of pages the "hard" way, e.g. instead of just shifting @ulen.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lockTake and hold kvm->lock for before checking sev_guest() insev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lockis held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can'trollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add toa not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83 Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00 RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256 RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000 RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000 R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000 R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000 FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0 Call Trace: kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371 kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363 __se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f34e9f7e9a9 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9 RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007 RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8 with a syzlang reproducer that looks like: syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async) syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async) r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0) r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0) ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async) ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async) ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async) r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0) openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async) ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async) r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2) close(r0) (async) openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async) ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async) ioctl$KVM_RUN(r5, 0xae80, 0x0)Opportunistically use guard() to avoid having to define a new error labeland goto usage.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: pci-epf-vntb: Remove duplicate resource teardownepf_ntb_epc_destroy() duplicates the teardown that the caller issupposed to perform later. This leads to an oops when .allow_link failsor when .drop_link is performed. The following is an example oops of theformer case: Unable to handle kernel paging request at virtual address dead000000000108 [...] [dead000000000108] address between user and kernel address ranges Internal error: Oops: 0000000096000044 [#1] SMP [...] Call trace: pci_epc_remove_epf+0x78/0xe0 (P) pci_primary_epc_epf_link+0x88/0xa8 configfs_symlink+0x1f4/0x5a0 vfs_symlink+0x134/0x1d8 do_symlinkat+0x88/0x138 __arm64_sys_symlinkat+0x74/0xe0 [...]Remove the helper, and drop pci_epc_put(). EPC device refcounting istied to the configfs EPC group lifetime, and pci_epc_put() in the.drop_link path is sufficient.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: handle invalid dinode in ocfs2_group_extend[BUG]kernel BUG at fs/ocfs2/resize.c:308!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTIRIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1feCall Trace: ... ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e ...[CAUSE]ocfs2_group_extend() assumes that the global bitmap inode blockreturned from ocfs2_inode_lock() has already been validated andBUG_ONs when the signature is not a dinode. That assumption is toostrong for crafted filesystems because the JBD2-managed buffer pathcan bypass structural validation and return an invalid dinode to theresize ioctl.[FIX]Validate the dinode explicitly in ocfs2_group_extend(). If the globalbitmap buffer does not contain a valid dinode, report filesystemcorruption with ocfs2_error() and fail the resize operation instead ofcrashing the kernel.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: mm: Handle invalid large leaf mappings correctlyIt has been possible for a long time to mark ptes in the linear map asinvalid. This is done for secretmem, kfence, realm dma memory un/share,and others, by simply clearing the PTE_VALID bit. But until commita166563e7ec37 ("arm64: mm: support large block mapping whenrodata=full") large leaf mappings were never made invalid in this way.It turns out various parts of the code base are not equipped to handleinvalid large leaf mappings (in the way they are currently encoded) andI've observed a kernel panic while booting a realm guest on aBBML2_NOABORT system as a result:[ 15.432706] software IO TLB: Memory encryption is active and system is using DMA bounce buffers[ 15.476896] Unable to handle kernel paging request at virtual address ffff000019600000[ 15.513762] Mem abort info:[ 15.527245] ESR = 0x0000000096000046[ 15.548553] EC = 0x25: DABT (current EL), IL = 32 bits[ 15.572146] SET = 0, FnV = 0[ 15.592141] EA = 0, S1PTW = 0[ 15.612694] FSC = 0x06: level 2 translation fault[ 15.640644] Data abort info:[ 15.661983] ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000[ 15.694875] CM = 0, WnR = 1, TnD = 0, TagAccess = 0[ 15.723740] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[ 15.755776] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081f3f000[ 15.800410] [ffff000019600000] pgd=0000000000000000, p4d=180000009ffff403, pud=180000009fffe403, pmd=00e8000199600704[ 15.855046] Internal error: Oops: 0000000096000046 [#1] SMP[ 15.886394] Modules linked in:[ 15.900029] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc4-dirty #4 PREEMPT[ 15.935258] Hardware name: linux,dummy-virt (DT)[ 15.955612] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)[ 15.986009] pc : __pi_memcpy_generic+0x128/0x22c[ 16.006163] lr : swiotlb_bounce+0xf4/0x158[ 16.024145] sp : ffff80008000b8f0[ 16.038896] x29: ffff80008000b8f0 x28: 0000000000000000 x27: 0000000000000000[ 16.069953] x26: ffffb3976d261ba8 x25: 0000000000000000 x24: ffff000019600000[ 16.100876] x23: 0000000000000001 x22: ffff0000043430d0 x21: 0000000000007ff0[ 16.131946] x20: 0000000084570010 x19: 0000000000000000 x18: ffff00001ffe3fcc[ 16.163073] x17: 0000000000000000 x16: 00000000003fffff x15: 646e612065766974[ 16.194131] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000[ 16.225059] x11: 0000000000000000 x10: 0000000000000010 x9 : 0000000000000018[ 16.256113] x8 : 0000000000000018 x7 : 0000000000000000 x6 : 0000000000000000[ 16.287203] x5 : ffff000019607ff0 x4 : ffff000004578000 x3 : ffff000019600000[ 16.318145] x2 : 0000000000007ff0 x1 : ffff000004570010 x0 : ffff000019600000[ 16.349071] Call trace:[ 16.360143] __pi_memcpy_generic+0x128/0x22c (P)[ 16.380310] swiotlb_tbl_map_single+0x154/0x2b4[ 16.400282] swiotlb_map+0x5c/0x228[ 16.415984] dma_map_phys+0x244/0x2b8[ 16.432199] dma_map_page_attrs+0x44/0x58[ 16.449782] virtqueue_map_page_attrs+0x38/0x44[ 16.469596] virtqueue_map_single_attrs+0xc0/0x130[ 16.490509] virtnet_rq_alloc.isra.0+0xa4/0x1fc[ 16.510355] try_fill_recv+0x2a4/0x584[ 16.526989] virtnet_open+0xd4/0x238[ 16.542775] __dev_open+0x110/0x24c[ 16.558280] __dev_change_flags+0x194/0x20c[ 16.576879] netif_change_flags+0x24/0x6c[ 16.594489] dev_change_flags+0x48/0x7c[ 16.611462] ip_auto_config+0x258/0x1114[ 16.628727] do_one_initcall+0x80/0x1c8[ 16.645590] kernel_init_freeable+0x208/0x2f0[ 16.664917] kernel_init+0x24/0x1e0[ 16.680295] ret_from_fork+0x10/0x20[ 16.696369] Code: 927cec03 cb0e0021 8b0e0042 a9411c26 (a900340c)[ 16.723106] ---[ end trace 0000000000000000 ]---[ 16.752866] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b[ 16.792556] Kernel Offset: 0x3396ea200000 from 0xffff8000800000---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vfio/xe: Reorganize the init to decouple migration from resetAttempting to issue reset on VF devices that don't support migrationleads to the following: BUG: unable to handle page fault for address: 00000000000011f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 7443 Comm: xe_sriov_flr Tainted: G S U 7.0.0-rc1-lgci-xe-xe-4588-cec43d5c2696af219-nodebug+ #1 PREEMPT(lazy) Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 RIP: 0010:xe_sriov_vfio_wait_flr_done+0xc/0x80 [xe] Code: ff c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 <83> bf f8 11 00 00 02 75 61 41 89 f4 85 f6 74 52 48 8b 47 08 48 89 RSP: 0018:ffffc9000f7c39b8 EFLAGS: 00010202 RAX: ffffffffa04d8660 RBX: ffff88813e3e4000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000f7c39c8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888101a48800 R13: ffff88813e3e4150 R14: ffff888130d0d008 R15: ffff88813e3e40d0 FS: 00007877d3d0d940(0000) GS:ffff88890b6d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000011f8 CR3: 000000015a762000 CR4: 0000000000f52ef0 PKRU: 55555554 Call Trace: xe_vfio_pci_reset_done+0x49/0x120 [xe_vfio_pci] pci_dev_restore+0x3b/0x80 pci_reset_function+0x109/0x140 reset_store+0x5c/0xb0 dev_attr_store+0x17/0x40 sysfs_kf_write+0x72/0x90 kernfs_fop_write_iter+0x161/0x1f0 vfs_write+0x261/0x440 ksys_write+0x69/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x259/0x26e0 do_syscall_64+0xcb/0x1500 ? __fput+0x1a2/0x2d0 ? fput_close_sync+0x3d/0xa0 ? __x64_sys_close+0x3e/0x90 ? x64_sys_call+0x1b7c/0x26e0 ? do_syscall_64+0x109/0x1500 ? __task_pid_nr_ns+0x68/0x100 ? __do_sys_getpid+0x1d/0x30 ? x64_sys_call+0x10b5/0x26e0 ? do_syscall_64+0x109/0x1500 ? putname+0x41/0x90 ? do_faccessat+0x1e8/0x300 ? __x64_sys_access+0x1c/0x30 ? x64_sys_call+0x1822/0x26e0 ? do_syscall_64+0x109/0x1500 ? tick_program_event+0x43/0xa0 ? hrtimer_interrupt+0x126/0x260 ? irqentry_exit+0xb2/0x710 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7877d5f1c5a4 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d a5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fff48e5f908 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007877d5f1c5a4 RDX: 0000000000000001 RSI: 00007877d621b0c9 RDI: 0000000000000009 RBP: 0000000000000001 R08: 00005fb49113b010 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000202 R12: 00007877d621b0c9 R13: 0000000000000009 R14: 00007fff48e5fac0 R15: 00007fff48e5fac0 This is caused by the fact that some of the xe_vfio_pci_core_devicemembers needed for handling reset are only initialized as part ofmigration init.Fix the problem by reorganizing the code to decouple VF init frommigration init.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: core: clamp report_size in s32ton() to avoid undefined shifts32ton() shifts by n-1 where n is the field's report_size, a value thatcomes directly from a HID device. The HID parser bounds report_sizeonly to <= 256, so a broken HID device can supply a report descriptorwith a wide field that triggers shift exponents up to 256 on a 32-bittype when an output report is built via hid_output_field() orhid_set_field().Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds inhid_report_raw_event") added the same n > 32 clamp to the functionsnto32(), but s32ton() was never given the same fix as I guess syzbothadn't figured out how to fuzz a device the same way.Fix this up by just clamping the max value of n, just like snto32()does.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: alps: fix NULL pointer dereference in alps_raw_event()Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_eventcallbacks missing them") attempted to fix up the HID drivers that hadmissed the previous fix that was done in 2ff5baa9b527 ("HID: appleir:Fix potential NULL dereference at raw event handle"), but the alpsdriver was missed.Fix this up by properly checking in the hid-alps driver that it had beenclaimed correctly before attempting to process the raw event.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: proc: size address buffers for %pISpc outputThe AF_RXRPC procfs helpers format local and remote socket addresses intofixed 50-byte stack buffers with "%pISpc".That is too small for the longest current-tree IPv6-with-port form theformatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses adotted-quad tail not only for v4mapped addresses, but also for ISATAPaddresses via ipv6_addr_is_isatap().As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535is possible with the current formatter. That is 50 visible characters, so51 bytes including the trailing NUL, which does not fit in the existingchar[50] buffers used by net/rxrpc/proc.c.Size the buffers from the formatter's maximum textual form and switch thecall sites to scnprintf().Changes since v1:- correct the changelog to cite the actual maximum current-tree case explicitly- frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix call removal to use RCU safe deletionFix rxrpc call removal from the rxnet->calls list to use list_del_rcu()rather than list_del_init() to prevent stuffing up reading/proc/net/rxrpc/calls from potentially getting into an infinite loop.This, however, means that list_empty() no longer works on an entry that'sbeen deleted from the list, making it harder to detect prior deletion. Fixthis by:Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls thatare unexpectedly still on the list. Limiting the number of steps meansthere's no need to call cond_resched() or to remove calls from the listhere, thereby eliminating the need for rxrpc_put_call() to check for that.rxrpc_put_call() can then be fixed to unconditionally delete the call fromthe list as it is the only place that the deletion occurs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()page_pool_create() can return an ERR_PTR on failure. The return valueis used unconditionally in the loop that follows, passing the errorpointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(),which dereferences it, causing a kernel oops.Add an IS_ERR check after page_pool_create() to return early on failure.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mmc: vub300: fix NULL-deref on disconnectMake sure to deregister the controller before dropping the reference tothe driver data on disconnect to avoid NULL-pointer dereferences oruse-after-free.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabledKeep the NOC_HDCP clock always enabled to fix the potential hangcaused by the NoC ADB400 port power down handshake.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: pn533: allocate rx skb before consuming bytespn532_receive_buf() reports the number of accepted bytes to the serdevcore. The current code consumes bytes into recv_skb and may already handa complete frame to pn533_recv_frame() before allocating a fresh receivebuffer.If that alloc_skb() fails, the callback returns 0 even though it hasalready consumed bytes, and it leaves recv_skb as NULL for the nextreceive callback. That breaks the receive_buf() accounting contract andcan also lead to a NULL dereference on the next skb_put_u8().Allocate the receive skb lazily before consuming the next byte instead.If allocation fails, return the number of bytes already accepted.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: brcmsmac: Fix dma_free_coherent() sizedma_alloc_consistent() may change the size to align it. The new size issaved in alloced.Change the free size to match the allocation size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: clear trailing padding in build_polexpire()build_expire() clears the trailing padding bytes of structxfrm_user_expire after setting the hard field via memset_after(),but the analogous function build_polexpire() does not do this forstruct xfrm_user_polexpire.The padding bytes after the __u8 hard field are leftuninitialized from the heap allocation, and are then sent touserspace via netlink multicast to XFRMNLGRP_EXPIRE listeners,leaking kernel heap memory contents.Add the missing memset_after() call, matching build_expire().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: rfkill: prevent unlimited numbers of rfkill events from being createdUserspace can create an unlimited number of rfkill events if the systemis so configured, while not consuming them from the rfkill filedescriptor, causing a potential out of memory situation. Prevent thisfrom bounding the number of pending rfkill events at a "large" number(i.e. 1000) to prevent abuses like this.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].Validate addrnr during rule installation so malformed rules are rejectedbefore the match logic can use an out-of-range value.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - limit RX SG extraction by receive buffer budgetMake af_alg_get_rsgl() limit each RX scatterlist extraction to theremaining receive buffer budget.af_alg_get_rsgl() currently uses af_alg_readable() only as a gatebefore extracting data into the RX scatterlist. Limit each extractionto the remaining af_alg_rcvbuf(sk) budget so that receive-sideaccounting matches the amount of data attached to the request.If skcipher cannot obtain enough RX space for at least one chunk whilemore data remains to be processed, reject the recvmsg call instead ofrounding the request length down to zero.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix missing validation of ticket length in non-XDR key preparsingIn rxrpc_preparse(), there are two paths for parsing key payloads: theXDR path (for large payloads) and the non-XDR path (for payloads <= 28bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctlyvalidates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDRpath fails to do so.This allows an unprivileged user to provide a very large ticket length.When this key is later read via rxrpc_read(), the totaltoken size (toksize) calculation results in a value that exceedsAFSTOKEN_LENGTH_MAX, triggering a WARN_ON().[ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc]Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse()to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX,bringing it into parity with the XDR parsing logic.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"),`gdev->dev.release` is unset. As a result, the reference count to`gdev->dev` isn't dropped on the error handling paths.Drop the reference on errors.Also reorder the instructions to make the error handling simpler.Now gpiochip_add_data_with_key() roughly looks like: >>> Some memory allocation. Go to ERR ZONE 1 on errors. >>> device_initialize(). gpiodev_release() takes over the responsibility for freeing the resources of `gdev->dev`. The subsequent error handling paths shouldn't go through ERR ZONE 1 again which leads to double free. >>> Some initialization mainly on `gdev`. >>> The rest of initialization. Go to ERR ZONE 2 on errors. >>> Chip registration success and exit. >>> ERR ZONE 2. gpio_device_put() and exit. >>> ERR ZONE 1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ftgmac100: fix ring allocation unwind on open failureftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, andrx_scratch in stages. On intermediate failures it returned -ENOMEMdirectly, leaking resources allocated earlier in the function.Rework the failure path to use staged local unwind labels and freeallocated resources in reverse order before returning -ENOMEM. Thismatches common netdev allocation cleanup style.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: ni_atmio16d: Fix invalid clean-up after failed attachIf the driver's COMEDI "attach" handler function (`atmio16d_attach()`)returns an error, the COMEDI core will call the driver's "detach"handler function (`atmio16d_detach()`) to clean up. This calls`reset_atmio16d()` unconditionally, but depending on where the erroroccurred in the attach handler, the device may not have beensufficiently initialized to call `reset_atmio16d()`. It uses`dev->iobase` as the I/O port base address and `dev->private` as thepointer to the COMEDI device's private data structure. `dev->iobase`may still be set to its initial value of 0, which would result inundesired writes to low I/O port addresses. `dev->private` may still be`NULL`, which would result in null pointer dereferences.Fix `atmio16d_detach()` by checking that `dev->private` is valid(non-null) before calling `reset_atmio16d()`. This implies that`dev->iobase` was set correctly since that is set up before`dev->private`.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: dt2815: add hardware detection to prevent crashThe dt2815 driver crashes when attached to I/O ports without actualhardware present. This occurs because syzkaller or users can attachthe driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.When no hardware exists at the specified port, inb() operations return0xff (floating bus), but outb() operations can trigger page faults dueto undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110Add hardware detection by reading the status register before attemptingany write operations. If the read returns 0xff, assume no hardware ispresent and fail the attach with -ENODEV. This prevents crashes fromoutb() operations on non-existent hardware.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bridge: br_nd_send: validate ND option lengthsbr_nd_send() walks ND options according to option-provided lengths.A malformed option can make the parser advance beyond the computedoption span or use a too-short source LLADDR option payload.Validate option lengths against the remaining NS option area beforeadvancing, and only read source LLADDR when the option is large enoughfor an Ethernet address.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: cdns3: gadget: fix state inconsistency on gadget init failureWhen cdns3_gadget_start() fails, the DRD hardware is left in gadget modewhile software state remains INACTIVE, creating hardware/software stateinconsistency.When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/roleThe role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error,so cdns_role_stop() skips cleanup because state is still INACTIVE.This violates the DRD controller design specification (Figure22),which requires returning to idle state before switching roles.This leads to a synchronous external abort in xhci_gen_setup() whensetting up the host controller:[ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19[ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget[ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed...[ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller[ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP[ 1301.382485] pc : xhci_gen_setup+0xa4/0x408[ 1301.393391] backtrace: ... xhci_gen_setup+0xa4/0x408 <-- CRASH xhci_plat_setup+0x44/0x58 usb_add_hcd+0x284/0x678 ... cdns_role_set+0x9c/0xbc <-- Role switchFix by calling cdns_drd_gadget_off() in the error path to properlyclean up the DRD gadget state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: cdns3: gadget: fix NULL pointer dereference in ep_queueWhen the gadget endpoint is disabled or not yet configured, the ep->descpointer can be NULL. This leads to a NULL pointer dereference when__cdns3_gadget_ep_queue() is called, causing a kernel crash.Add a check to return -ESHUTDOWN if ep->desc is NULL, which is thestandard return code for unconfigured endpoints.This prevents potential crashes when ep_queue is called on endpointsthat are not ready.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: gyro: mpu3050: Fix irq resource leakThe interrupt handler is setup but only a few lines down ifiio_trigger_register() fails the function returns without properlyreleasing the handler.Add cleanup goto to resolve resource leak.Detected by Smatch:drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:'irq' from request_threaded_irq() not released on lines: 1124.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/i915/dsi: Don't do DSC horizontal timing adjustments in command modeStop adjusting the horizontal timing values based on thecompression ratio in command mode. Bspec seems to be tellingus to do this only in video mode, and this is also how theWindows driver does things.This should also fix a div-by-zero on some machines becausethe adjusted htotal ends up being so small that we end up withline_time_us==0 when trying to determine the vtotal value incommand mode.Note that this doesn't actually make the display on theHuawei Matebook E work, but at least the kernel no longerexplodes when the driver loads.(cherry picked from commit 0b475e91ecc2313207196c6d7fd5c53e1a878525)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: SMP: derive legacy responder STK authentication from MITM stateThe legacy responder path in smp_random() currently labels the storedSTK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.That reflects what the local service requested, not what the pairingflow actually achieved.For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clearand the resulting STK should remain unauthenticated even if the localside requested HIGH security. Use the established MITM state whenstoring the responder STK so the key metadata matches the pairing result.This also keeps the legacy path aligned with the Secure Connections code,which already treats JUST_WORKS/JUST_CFM as unauthenticated.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: ctxfi: Check the error for index mappingThe ctxfi driver blindly assumed a proper value returned fromdaio_device_index(), but it's not always true. Add a proper errorcheck to deal with the error from the function.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler()The memcpy function assumes the dynamic array notif->matches is at leastas large as the number of bytes to copy. Otherwise, results->matches maycontain unwanted data. To guarantee safety, extend the validation in oneof the checks to ensure sufficient packet length.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculationThe variable valuesize is declared as u8 but accumulates the totallength of all SSIDs to scan. Each SSID contributes up to 33 bytes(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)SSIDs the total can reach 330, which wraps around to 74 when storedin a u8.This causes kmalloc to allocate only 75 bytes while the subsequentmemcpy writes up to 331 bytes into the buffer, resulting in a 256-byteheap buffer overflow.Widen valuesize from u8 to u32 to accommodate the full range.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/ioc32: stop speculation on the drm_compat_ioctl pathThe drm compat ioctl path takes a user controlled pointer, and thendereferences it into a table of function pointers, the signature methodof spectre problems. Fix this up by calling array_index_nospec() on theindex to the function pointer list.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: jq is a command-line JSON processor. In versions 1.8.1 and below, functions jv_setpath(), jv_getpath(), and delpaths_sorted() in jq's src/jv_aux.c use unbounded recursion whose depth is controlled by the length of a caller-supplied path array, with no depth limit enforced. An attacker can supply a JSON document containing a flat array of ~65,000 integers (~200 KB) that, when used as a path argument by a trusted jq filter, exhausts the C call stack and crashes the process with a segmentation fault (SIGSEGV). This bypass works because the existing MAX_PARSING_DEPTH (10,000) limit only protects the JSON parser, not runtime path operations where arrays can be programmatically constructed to arbitrary lengths. The impact is denial of service (unrecoverable crash) affecting any application or service that processes untrusted JSON input through jq's setpath, getpath, or delpaths builtins. This issue has been addressed in commit fb59f1491058d58bdc3e8dd28f1773d1ac690a1f.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. Prior to version 0.9-rc4, any unprivileged local user can crash avahi-daemon by sending a single D-Bus method call with conflicting publish flags. This issue has been patched in version 0.9-rc4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.18.1).
Description: jq is a command-line JSON processor. In commits after 69785bf77f86e2ea1b4a20ca86775916889e91c9, the _strindices builtin in jq's src/builtin.c passes its arguments directly to jv_string_indexes() without verifying they are strings, and jv_string_indexes() in src/jv.c relies solely on assert() checks that are stripped in release builds compiled with -DNDEBUG. This allows an attacker to crash jq trivially with input like _strindices(0), and by crafting a numeric value whose IEEE-754 bit pattern maps to a chosen pointer, achieve a controlled pointer dereference and limited memory read/probe primitive. Any deployment that evaluates untrusted jq filters against a release build is vulnerable. This issue has been patched in commit fdf8ef0f0810e3d365cdd5160de43db46f57ed03.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: Sigstore Timestamp Authority is a service for issuing RFC 3161 timestamps. Versions 2.0.5 and below contain an authorization bypass vulnerability in the VerifyTimestampResponse function. VerifyTimestampResponse correctly verifies the certificate chain signature, but the TSA-specific constraint checks in VerifyLeafCert uses the first non-CA certificate from the PKCS#7 certificate bag instead of the leaf certificate from the verified chain. An attacker can exploit this by prepending a forged certificate to the certificate bag while the message is signed with an authorized key, causing the library to validate the signature against one certificate but perform authorization checks against another. This vulnerability only affects users of the timestamp-authority/v2/pkg/verification package and does not affect the timestamp-authority service itself or sigstore-go. The issue has been fixed in version 2.0.6.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker < 29.4.0_ce-150000.253.1 (version in image is 29.4.0_ce-150000.250.1).
Description: jq is a command-line JSON processor. Before commit 0c7d133c3c7e37c00b6d46b658a02244fdd3c784, jq used MurmurHash3 with a hardcoded, publicly visible seed (0x432A9843) for all JSON object hash table operations, which allowed an attacker to precompute key collisions offline. By supplying a crafted JSON object (~100 KB) where all keys hashed to the same bucket, hash table lookups degraded from O(1) to O(n), turning any jq expression into an O(n?) operation and causing significant CPU exhaustion. This affected common jq use cases such as CI/CD pipelines, web services, and data processing scripts, and was far more practical to exploit than existing heap overflow issues since it required only a small payload. This issue has been patched in commit 0c7d133c3c7e37c00b6d46b658a02244fdd3c784.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: Unknown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3-pyOpenSSL > 0-0 (version in image is 21.0.0-150400.13.1).
Description: jq is a command-line JSON processor. In 1.8.1 and earlier, Top-level jq programs loaded from a file with -f are truncated at the first embedded NUL byte on current upstream HEAD. A crafted filter file such as . followed by \x00 and arbitrary suffix compiles and executes as only the prefix before the NUL. This leaves jq with a post-CVE-2026-33948 prefix/full-buffer mismatch on the compilation path even though the JSON parser path has already been fixed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:accel/qaic: Handle DBC deactivation if the owner went awayWhen a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEVtransaction to the host over the QAIC_CONTROL MHI channel. QAIC handlesthis by calling decode_deactivate() to release the resources allocated forthat DBC. Since that handling is done in the qaic_manage_ioctl() context,if the user goes away before receiving and handling the deactivation, thehost will be out-of-sync with the DBCs available for use, and the DBCresources will not be freed unless the device is removed. If another userloads and requests to activate a network, then the device assigns the sameDBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,leading the user process to hang.As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactionsthat are received after the user has gone away.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix incorrect pruning due to atomic fetch precision trackingWhen backtrack_insn encounters a BPF_STX instruction with BPF_ATOMICand BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts asa destination, thus receiving the old value from the memory location.The current backtracking logic does not account for this. It treatsatomic fetch operations the same as regular stores where the srcregister is only an input. This leads the backtrack_insn to fail topropagate precision to the stack location, which is then not markedas precise!Later, the verifier's path pruning can incorrectly consider two statesequivalent when they differ in terms of stack state. Meaning, twobranches can be treated as equivalent and thus get pruned when theyshould not be seen as such.Fix it as follows: Extend the BPF_LDX handling in backtrack_insn toalso cover atomic fetch operations via is_atomic_fetch_insn() helper.When the fetch dst register is being tracked for precision, clear it,and propagate precision over to the stack slot. For non-stack memory,the precision walk stops at the atomic instruction, same as regularBPF_LDX. This covers all fetch variants.Before: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exitAfter: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0 mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1 mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Reject sleepable kprobe_multi programs at attach timekprobe.multi programs run in atomic/RCU context and cannot sleep.However, bpf_kprobe_multi_link_attach() did not validate whether theprogram being attached had the sleepable flag set, allowing sleepablehelpers such as bpf_copy_from_user() to be invoked from a non-sleepablecontext.This causes a "sleeping function called from invalid context" splat: BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 0Fix this by rejecting sleepable programs early inbpf_kprobe_multi_link_attach(), before any further processing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: lag: Check for LAG device before creating debugfs__mlx5_lag_dev_add_mdev() may return 0 (success) even when an erroroccurs that is handled gracefully. Consequently, the initializationflow proceeds to call mlx5_ldev_add_debugfs() even when there is novalid LAG context.mlx5_ldev_add_debugfs() blindly created the debugfs directory andattributes. This exposed interfaces (like the members file) that rely ona valid ldev pointer, leading to potential NULL pointer dereferences ifaccessed when ldev is NULL.Add a check to verify that mlx5_lag_dev(dev) returns a valid pointerbefore attempting to create the debugfs entries.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: macb: properly unregister fixed rate clocksThe additional resources allocated with clk_register_fixed_rate() needto be released with clk_unregister_fixed_rate(), otherwise they are lost.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: macb: fix clk handling on PCI glue driver removalplatform_device_unregister() may still want to use the registered clksduring runtime resume callback.Note that there is a commit d82d5303c4c5 ("net: macb: fix use after freeon rmmod") that addressed the similar problem of clk vs platform deviceunregistration but just moved the bug to another place.Save the pointers to clks into local variables for reuse after platformdevice is unregistered.BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60Read of size 8 at addr ffff888104f85e00 by task modprobe/597CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014Call Trace: dump_stack_lvl+0x8d/0xba print_report+0x17f/0x496 kasan_report+0xd9/0x180 clk_prepare+0x5a/0x60 macb_runtime_resume+0x13d/0x410 [macb] pm_generic_runtime_resume+0x97/0xd0 __rpm_callback+0xc8/0x4d0 rpm_callback+0xf6/0x230 rpm_resume+0xeeb/0x1a70 __pm_runtime_resume+0xb4/0x170 bus_remove_device+0x2e3/0x4b0 device_del+0x5b3/0xdc0 platform_device_del+0x4e/0x280 platform_device_unregister+0x11/0x50 pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 519: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x8e/0x90 __clk_register+0x458/0x2890 clk_hw_register+0x1a/0x60 __clk_hw_register_fixed_rate+0x255/0x410 clk_register_fixed_rate+0x3c/0xa0 macb_probe+0x1d8/0x42e [macb_pci] local_pci_probe+0xd7/0x190 pci_device_probe+0x252/0x600 really_probe+0x255/0x7f0 __driver_probe_device+0x1ee/0x330 driver_probe_device+0x4c/0x1f0 __driver_attach+0x1df/0x4e0 bus_for_each_dev+0x15d/0x1f0 bus_add_driver+0x486/0x5e0 driver_register+0x23a/0x3d0 do_one_initcall+0xfd/0x4d0 do_init_module+0x18b/0x5a0 load_module+0x5663/0x7950 __do_sys_finit_module+0x101/0x180 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8Freed by task 597: kasan_save_stack+0x2c/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x50 __kasan_slab_free+0x106/0x180 __kmem_cache_free+0xbc/0x320 clk_unregister+0x6de/0x8d0 macb_remove+0x73/0xc0 [macb_pci] pci_device_remove+0xae/0x210 device_remove+0xcb/0x180 device_release_driver_internal+0x529/0x770 driver_detach+0xd4/0x1a0 bus_remove_driver+0x135/0x260 driver_unregister+0x72/0xb0 pci_unregister_driver+0x26/0x220 __do_sys_delete_module+0x32e/0x550 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().syzbot reported use-after-free of AF_UNIX socket's sk->sk_socketin sk_psock_verdict_data_ready(). [0]In unix_stream_sendmsg(), the peer socket's ->sk_data_ready() iscalled after dropping its unix_state_lock().Although the sender socket holds the peer's refcount, it does notprevent the peer's sock_orphan(), and the peer's sk_socket mightbe freed after one RCU grace period.Let's fetch the peer's sk->sk_socket and sk->sk_socket->ops underRCU in sk_psock_verdict_data_ready().[0]:BUG: KASAN: slab-use-after-free in sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278Read of size 8 at addr ffff8880594da860 by task syz.4.1842/11013CPU: 1 UID: 0 PID: 11013 Comm: syz.4.1842 Not tainted syzkaller #0 PREEMPT(full)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026Call Trace: dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xba/0x230 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278 unix_stream_sendmsg+0x8a3/0xe80 net/unix/af_unix.c:2482 sock_sendmsg_nosec net/socket.c:721 [inline] __sock_sendmsg net/socket.c:736 [inline] ____sys_sendmsg+0x972/0x9f0 net/socket.c:2585 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2639 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2674 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7facf899c819Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007facf9827028 EFLAGS: 00000246 ORIG_RAX: 000000000000002eRAX: ffffffffffffffda RBX: 00007facf8c15fa0 RCX: 00007facf899c819RDX: 0000000000000000 RSI: 0000200000000500 RDI: 0000000000000004RBP: 00007facf8a32c91 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000R13: 00007facf8c16038 R14: 00007facf8c15fa0 R15: 00007ffd41b01c78 Allocated by task 11013: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4538 [inline] slab_alloc_node mm/slub.c:4866 [inline] kmem_cache_alloc_lru_noprof+0x2b8/0x640 mm/slub.c:4885 sock_alloc_inode+0x28/0xc0 net/socket.c:316 alloc_inode+0x6a/0x1b0 fs/inode.c:347 new_inode_pseudo include/linux/fs.h:3003 [inline] sock_alloc net/socket.c:631 [inline] __sock_create+0x12d/0x9d0 net/socket.c:1562 sock_create net/socket.c:1656 [inline] __sys_socketpair+0x1c4/0x560 net/socket.c:1803 __do_sys_socketpair net/socket.c:1856 [inline] __se_sys_socketpair net/socket.c:1853 [inline] __x64_sys_socketpair+0x9b/0xb0 net/socket.c:1853 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fFreed by task 15: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 [inline] __kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:2685 [inline] slab_free mm/slub.c:6165 [inline] kmem_cache_free+0x187/0x630 mm/slub.c:6295 rcu_do_batch kernel/rcu/tree.c:---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: validate mesh send advertising payload lengthmesh_send() currently bounds MGMT_OP_MESH_SEND by total commandlength, but it never verifies that the bytes supplied for theflexible adv_data[] array actually match the embedded adv_data_lenfield. MGMT_MESH_SEND_SIZE only covers the fixed header, so atruncated command can still pass the existing 20..50 byte rangecheck and later drive the async mesh send path past the end of thequeued command buffer.Keep rejecting zero-length and oversized advertising payloads, butvalidate adv_data_len explicitly and require the command length toexactly match the flexible array size before queueing the request.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_event: fix potential UAF in hci_le_remote_conn_param_req_evthci_conn lookup and field access must be covered by hdev lock inhci_le_remote_conn_param_req_evt, otherwise it's possible it is freedconcurrently.Extend the hci_dev_lock critical section to cover all conn usage.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_conn: fix potential UAF in set_cig_params_synchci_conn lookup and field access must be covered by hdev lock inset_cig_params_sync, otherwise it's possible it is freed concurrently.Take hdev lock to prevent hci_conn from being deleted or modifiedconcurrently. Just RCU lock is not suitable here, as we also want toavoid "tearing" in the configuration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: validate LTK enc_size on loadLoad Long Term Keys stores the user-provided enc_size and later usesit to size fixed-size stack operations when replying to LE LTKrequests. An enc_size larger than the 16-byte key buffer can thereforeoverflow the reply stack buffer.Reject oversized enc_size values while validating the management LTKrecord so invalid keys never reach the stored key state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if existshci_cmd_sync_queue_once() needs to indicate whether a queue item wasadded, so caller can know if callbacks are called, so it can avoidleaking resources.Change the function to return -EEXIST if queue item already exists.Modify all callsites to handle that.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: reject immediate NF_QUEUE verdictnft_queue is always used from userspace nftables to deliver the NF_QUEUEverdict. Immediately emitting an NF_QUEUE verdict is never used by theuserspace nft tools, so reject immediate NF_QUEUE verdicts.The arp family does not provide queue support, but such an immediateverdict is still reachable. Globally reject NF_QUEUE immediate verdictsto address this issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absentctnetlink_alloc_expect() allocates expectations from a non-zeroingslab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is notpresent in the netlink message, saved_addr and saved_proto arenever initialized. Stale data from a previous slab occupant canthen be dumped to userspace by ctnetlink_exp_dump_expect(), whichchecks these fields to decide whether to emit CTA_EXPECT_NAT.The safe sibling nf_ct_expect_init(), used by the packet path,explicitly zeroes these fields.Zero saved_addr, saved_proto and dir in the else branch, guardedby IS_ENABLED(CONFIG_NF_NAT) since these fields only exist whenNAT is enabled.Confirmed by priming the expect slab with NAT-bearing expectations,freeing them, creating a new expectation without CTA_EXPECT_NAT,and observing that the ctnetlink dump emits a spuriousCTA_EXPECT_NAT containing stale data from the prior allocation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: x_tables: ensure names are nul-terminatedReject names that lack a \0 character before feeding themto functions that expect c-strings.Fixes tag is the most recent commit that needs this change.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix regsafe() for pointers to packetIn case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == Nregsafe() may return true which may lead to current state withvalid packet range not being explored. Fix the bug.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFC: pn533: bound the UART receive bufferpn532_receive_buf() appends every incoming byte to dev->recv_skb andonly resets the buffer after pn532_uart_rx_is_frame() recognizes acomplete frame. A continuous stream of bytes without a valid PN532 frameheader therefore keeps growing the skb until skb_put_u8() hits the taillimit.Drop the accumulated partial frame once the fixed receive buffer is fullso malformed UART traffic cannot grow the skb pastPN532_UART_SKB_BUFF_LEN.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bnxt_en: set backing store type from query typebnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from thefirmware response in ctxm->type and later uses that value to indexfixed backing-store metadata arrays such as ctx_arr[] andbnxt_bstore_to_trace[].ctxm->type is fixed by the current backing-store query type and matchesthe array index of ctx->ctx_arr. Set ctxm->type from the current loopvariable instead of depending on resp->type.Also update the loop to advance type from next_valid_type in the forstatement, which keeps the control flow simpler for non-valid andunchanged entries.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leakWhen building netlink messages, tc_chain_fill_node() never initializesthe tcm_info field of struct tcmsg. Since the allocation is not zeroed,kernel heap memory is leaked to userspace through this 4-byte field.The fix simply zeroes tcm_info alongside the other fields that arealready initialized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: use skb_header_pointer() for TCPv4 GSO frag_off checkSyzbot reported a KMSAN uninit-value warning in gso_features_check()called from netif_skb_features() [1].gso_features_check() reads iph->frag_off to decide whether to clearmangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr()can rely on skb header offsets that are not always safe for directdereference on packets injected from PF_PACKET paths.Use skb_header_pointer() for the TCPv4 frag_off check so the header readis robust whether data is already linear or needs copying.[1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leakWhen processing Router Advertisements with user options the kernelbuilds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg structhas three padding fields that are never zeroed and can leak kernel dataThe fix is simple, just zeroes the padding fields.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak__radix_tree_create() allocates and links intermediate nodes into thetree one by one. If a subsequent allocation fails, the already-linkednodes remain in the tree with no corresponding leaf entry. These orphanedinternal nodes are never reclaimed because radix_tree_for_each_slot()only visits slots containing leaf values.The radix_tree API is deprecated in favor of xarray. As suggested byMatthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray insteadof fixing the radix_tree itself [1]. xarray properly handles cleanup ofinternal nodes - xa_destroy() frees all internal xarray nodes when theqrtr_node is released, preventing the leak.[1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mpls: add seqcount to protect the platform_label{,s} pairThe RCU-protected codepaths (mpls_forward, mpls_dump_routes) can havean inconsistent view of platform_labels vs platform_label in case of aconcurrent resize (resize_platform_label_table, underplatform_mutex). This can lead to OOB accesses.This patch adds a seqcount, so that we get a consistent snapshot.Note that mpls_label_ok is also susceptible to this, so the checkagainst RTA_DST in rtm_to_route_config, done outside platform_mutex,is not sufficient. This value gets passed to mpls_label_ok once morein both mpls_route_add and mpls_route_del, so there is no issue, butthat additional check must not be removed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af-alg - fix NULL pointer dereference in scatterwalkThe AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL)when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGLexactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequentsendmsg() allocates a new SGL and chains it, but fails to clear the endmarker on the previous SGL's last data entry.This causes the crypto scatterwalk to hit a premature end, returning NULLon sg_next() and leading to a kernel panic during dereference.Fix this by explicitly unmarking the end of the previous SGL whenperforming sg_chain() in af_alg_alloc_tsgl().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: multitouch: Check to ensure report responses match the requestIt is possible for a malicious (or clumsy) device to respond to aspecific report's feature request using a completely different reportID. This can cause confusion in the HID core resulting in nastyside-effects such as OOB writes.Add a check to ensure that the report ID in the response, matches theone that was requested. If it doesn't, omit reporting the raw event andreturn early.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: core: Mitigate potential OOB by removing bogus memset()The memset() in hid_report_raw_event() has the good intention ofclearing out bogus data by zeroing the area from the end of the incomingdata string to the assumed end of the buffer. However, as we havepreviously seen, doing so can easily result in OOB reads and writes inthe subsequent thread of execution.The current suggestion from one of the HID maintainers is to remove thememset() and simply return if the incoming event buffer size is notlarge enough to fill the associated report.Suggested-by Benjamin Tissoires [bentiss: changed the return value]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failurePresently, if the force feedback initialisation fails when probing theLogitech G920 Driving Force Racing Wheel for Xbox One, an error numberwill be returned and propagated before the userspace infrastructure(sysfs and /dev/input) has been torn down. If userspace ignores theerrors and continues to use its references to these dangling entities, aUAF will promptly follow.We have 2 options; continue to return the error, but ensure that all ofthe infrastructure is torn down accordingly or continue to treat thiscondition as a warning by emitting the message but returning success.It is thought that the original author's intention was to emit thewarning but keep the device functional, less the force feedback feature,so let's go with that.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irqThe wacom_intuos_bt_irq() function processes Bluetooth HID reportswithout sufficient bounds checking. A maliciously crafted short reportcan trigger an out-of-bounds read when copying data into the wacomstructure.Specifically, report 0x03 requires at least 22 bytes to safely readthe processed data and battery status, while report 0x04 (whichfalls through to 0x03) requires 32 bytes.Add explicit length checks for these report IDs and log a warning ifa short report is received.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: close crash window in attr dabtree inactivationWhen inactivating an inode with node-format extended attributes,xfs_attr3_node_inactive() invalidates all child leaf/node blocks viaxfs_trans_binval(), but intentionally does not remove the correspondingentries from their parent node blocks. The implicit assumption is thatxfs_attr_inactive() will truncate the entire attr fork to zero extentsafterwards, so log recovery will never reach the root node and followthose stale pointers.However, if a log shutdown occurs after the leaf/node block cancellationscommit but before the attr bmap truncation commits, this assumptionbreaks. Recovery replays the attr bmap intact (the inode still hasattr fork extents), but suppresses replay of all cancelled leaf/nodeblocks, maybe leaving them as stale data on disk. On the next mount,xlog_recover_process_iunlinks() retries inactivation and attempts toread the root node via the attr bmap. If the root node was not replayed,reading the unreplayed root block triggers a metadata verificationfailure immediately; if it was replayed, following its child pointersto unreplayed child blocks triggers the same failure: XFS (pmem0): Metadata corruption detected at xfs_da3_node_read_verify+0x53/0x220, xfs_da3_node block 0x78 XFS (pmem0): Unmount and run xfs_repair XFS (pmem0): First 128 bytes of corrupted metadata buffer: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ XFS (pmem0): metadata I/O error in "xfs_da_read_buf+0x104/0x190" at daddr 0x78 len 8 error 117Fix this in two places:In xfs_attr3_node_inactive(), after calling xfs_trans_binval() on achild block, immediately remove the entry that references it from theparent node in the same transaction. This eliminates the window wherethe parent holds a pointer to a cancelled block. Once all children areremoved, the now-empty root node is converted to a leaf block within thesame transaction. This node-to-leaf conversion is necessary for crashsafety. If the system shutdown after the empty node is written to thelog but before the second-phase bmap truncation commits, log recoverywill attempt to verify the root block on disk. xfs_da3_node_verify()does not permit a node block with count == 0; such a block will failverification and trigger a metadata corruption shutdown. on the otherhand, leaf blocks are allowed to have this transient state.In xfs_attr_inactive(), split the attr fork truncation into two explicitphases. First, truncate all extents beyond the root block (the childextents whose parent references have already been removed above).Second, invalidate the root block and truncate the attr bmap to zero ina single transaction. The two operations in the second phase must beatomic: as long as the attr bmap has any non-zero length, recovery canfollow it to the root block, so the root block invalidation must committogether with the bmap-to-zero truncation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: tcm_loop: Drain commands in target_reset handlertcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESSwithout draining any in-flight commands. The SCSI EH documentation(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driverhas made lower layers "forget about timed out scmds" and is ready for newcommands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,mpi3mr) enforces this by draining or completing outstanding commands beforereturning SUCCESS.Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flightscsi_cmnd structures for recovery commands (e.g. TUR) while the target corestill has async completion work queued for the old se_cmd. The memset inqueuecommand zeroes se_lun and lun_ref_active, causingtransport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUNreference prevents transport_clear_lun_ref() from completing, hangingconfigfs LUN unlink forever in D-state: INFO: task rm:264 blocked for more than 122 seconds. rm D 0 264 258 0x00004000 Call Trace: __schedule+0x3d0/0x8e0 schedule+0x36/0xf0 transport_clear_lun_ref+0x78/0x90 [target_core_mod] core_tpg_remove_lun+0x28/0xb0 [target_core_mod] target_fabric_port_unlink+0x50/0x60 [target_core_mod] configfs_unlink+0x156/0x1f0 [configfs] vfs_unlink+0x109/0x290 do_unlinkat+0x1d5/0x2d0Fix this by making tcm_loop_target_reset() actually drain commands: 1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that the target core knows about (those not yet CMD_T_COMPLETE). 2. Use blk_mq_tagset_busy_iter() to iterate all started requests and flush_work() on each se_cmd - this drains any deferred completion work for commands that already had CMD_T_COMPLETE set before the TMR (which the TMR skips via __target_check_io_state()). This is the same pattern used by mpi3mr, scsi_debug, and libsas to drain outstanding commands during reset.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: correctly handle tunneled traffic on IPV6_CSUM GSO fallbackNETIF_F_IPV6_CSUM only advertises support for checksum offload ofpackets without IPv6 extension headers. Packets with extensionheaders must fall back onto software checksumming. Since TSOdepends on checksum offload, those must revert to GSO.The below commit introduces that fallback. It always checksnetwork header length. For tunneled packets, the inner header lengthmust be checked instead. Extend the check accordingly.A special case is tunneled packets without inner IP protocol. Such asRFC 6951 SCTP in UDP. Those are not standard IPv6 followed bytransport header either, so also must revert to the software GSO path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: Fix list corruption and UAF in command complete handlersCommit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introducedmgmt_pending_valid(), which not only validates the pending command butalso unlinks it from the pending list if it is valid. This change insemantics requires updates to several completion handlers to avoid listcorruption and memory safety issues.This patch addresses two left-over issues from the aforementioned rework:1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()is replaced with mgmt_pending_free() in the success path. Sincemgmt_pending_valid() already unlinks the command at the beginning ofthe function, calling mgmt_pending_remove() leads to a double list_del()and subsequent list corruption/kernel panic.2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the errorpath is removed. Since the current command is already unlinked bymgmt_pending_valid(), this foreach loop would incorrectly target otherpending mesh commands, potentially freeing them while they are still beingprocessed concurrently (leading to UAFs). The redundant mgmt_cmd_status()is also simplified to use cmd->opcode directly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_ct: drop pending enqueued packets on removalPackets sitting in nfqueue might hold a reference to:- templates that specify the conntrack zone, because a percpu area is used and module removal is possible.- conntrack timeout policies and helper, where object removal leave a stale reference.Since these objects can just go away, drop enqueued packets to avoidstale reference to them.If there is a need for finer grain removal, this logic can be revisitedto make selective packet drop upon dependencies.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:serial: 8250: Fix TX deadlock when using DMA`dmaengine_terminate_async` does not guarantee that the`__dma_tx_complete` callback will run. The callback is currently theonly place where `dma->tx_running` gets cleared. If the transaction iscanceled and the callback never runs, then `dma->tx_running` will neverget cleared and we will never schedule new TX DMA transactions again.This change makes it so we clear `dma->tx_running` after we terminatethe DMA transaction. This is "safe" because `serial8250_tx_dma_flush`is holding the UART port lock. The first thing the callback does is alsograb the UART port lock, so access to `dma->tx_running` is serialized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()l2cap_ecred_reconf_rsp() casts the incoming data to structl2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes withresult at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 byteswith result at offset 0).This causes two problems: - The sizeof(*rsp) length check requires 8 bytes instead of the correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected with -EPROTO. - rsp->result reads from offset 6 instead of offset 0, returning wrong data when the packet is large enough to pass the check.Fix by using the correct type. Also pass the already byte-swappedresult variable to BT_DBG instead of the raw __le16 field.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: idxd: Fix not releasing workqueue on .release()The workqueue associated with an DSA/IAA device is not released whenthe object is freed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_ll: Fix firmware leak on error pathSmatch reports:drivers/bluetooth/hci_ll.c:587 download_firmware() warn:'fw' from request_firmware() not released on lines: 544.In download_firmware(), if request_firmware() succeeds but the returnedfirmware content is invalid (no data or zero size), the function returnswithout releasing the firmware, resulting in a resource leak.Fix this by calling release_firmware() before returning whenrequest_firmware() succeeded but the firmware content is invalid.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/vc4: platform_get_irq_byname() returns an intplatform_get_irq_byname() will return a negative value if an errorhappens, so it should be checked and not just passed directly intodevm_request_threaded_irq() hoping all will be ok.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsglWhen page reassignment was added to af_alg_pull_tsgl the originalloop wasn't updated so it may try to reassign one more page thannecessary.Add the check to the reassignment so that this does not happen.Also update the comment which still refers to the obsolete offsetargument.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:perf/x86/intel/uncore: Skip discovery table for offline diesThis warning can be triggered if NUMA is disabled and the systemboots with fewer CPUs than the number of CPUs in die 0.WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore]Currently, the discovery table continues to be parsed even if all CPUsin the associated die are offline. This can lead to an array overflowat "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which maytrigger the warning above or cause other issues.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:l2tp: Drop large packets with UDP encapsyzbot reported a WARN on my patch series [1]. The actual issue is anoverflow of 16-bit UDP length field, and it exists in the upstream code.My series added a debug WARN with an overflow check that exposed theissue, that's why syzbot tripped on my patches, rather than on upstreamcode.syzbot's repro:r0 = socket$pppl2tp(0x18, 0x1, 0x1)r1 = socket$inet6_udp(0xa, 0x2, 0x0)connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c)connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4, 0x0, 0x0, 0x0, {0xa, 0x4e22, 0xffff, @ipv4={'\x00', '\xff\xff', @empty}}}}, 0x32)writev(r0, &(0x7f0000000080)=[{&(0x7f0000000000)="ee", 0x34000}], 0x1)It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDPencapsulation, and l2tp_xmit_core doesn't check for overflows when itassigns the UDP length field. The value gets trimmed to 16 bites.Add an overflow check that drops oversized packets and avoids sendingpackets with trimmed UDP length to the wire.syzbot's stack trace (with my patch applied):len >= 65536uWARNING: ./include/linux/udp.h:38 at udp_set_len_short include/linux/udp.h:38 [inline], CPU#1: syz.0.17/5957WARNING: ./include/linux/udp.h:38 at l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline], CPU#1: syz.0.17/5957WARNING: ./include/linux/udp.h:38 at l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327, CPU#1: syz.0.17/5957Modules linked in:CPU: 1 UID: 0 PID: 5957 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014RIP: 0010:udp_set_len_short include/linux/udp.h:38 [inline]RIP: 0010:l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline]RIP: 0010:l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327Code: 0f 0b 90 e9 21 f9 ff ff e8 e9 05 ec f6 90 0f 0b 90 e9 8d f9 ff ff e8 db 05 ec f6 90 0f 0b 90 e9 cc f9 ff ff e8 cd 05 ec f6 90 <0f> 0b 90 e9 de fa ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c 4fRSP: 0018:ffffc90003d67878 EFLAGS: 00010293RAX: ffffffff8ad985e3 RBX: ffff8881a6400090 RCX: ffff8881697f0000RDX: 0000000000000000 RSI: 0000000000034010 RDI: 000000000000ffffRBP: dffffc0000000000 R08: 0000000000000003 R09: 0000000000000004R10: dffffc0000000000 R11: fffff520007acf00 R12: ffff8881baf20900R13: 0000000000034010 R14: ffff8881a640008e R15: ffff8881760f7000FS: 000055557e81f500(0000) GS:ffff8882a9467000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000200000033000 CR3: 00000001612f4000 CR4: 00000000000006f0Call Trace: pppol2tp_sendmsg+0x40a/0x5f0 net/l2tp/l2tp_ppp.c:302 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] sock_write_iter+0x503/0x550 net/socket.c:1195 do_iter_readv_writev+0x619/0x8c0 fs/read_write.c:-1 vfs_writev+0x33c/0x990 fs/read_write.c:1059 do_writev+0x154/0x2e0 fs/read_write.c:1105 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f636479c629Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007ffffd4241c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014RAX: ffffffffffffffda RBX: 00007f6364a15fa0 RCX: 00007f636479c629RDX: 0000000000000001 RSI: 0000200000000080 RDI: 0000000000000003RBP: 00007f6364832b39 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000R13: 00007f6364a15fac R14: 00007f6364a15fa0 R15: 00007f6364a15fa0 [1]: https://lore.kernel.org/all/20260226201600.222044-1-alice.kernel@fastmail.im/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+Fix the field masks to match the hardware layout documented indownstream GSI (GSI_V3_0_EE_n_GSI_EE_GENERIC_CMD_*).Notably this fixes a WARN I was seeing when I tried to send "stop"to the MPSS remoteproc while IPA was up.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ioam6: fix OOB and missing lockWhen trace->type.bit6 is set: if (trace->type.bit6) { ... queue = skb_get_tx_queue(dev, skb); qdisc = rcu_dereference(queue->qdisc);This code can lead to an out-of-bounds access of the dev->_tx[] arraywhen is_input is true. In such a case, the packet is on the RX path andskb->queue_mapping contains the RX queue index of the ingress device. Ifthe ingress device has more RX queues than the egress device (dev) hasTX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.Add a check to avoid this situation since skb_get_tx_queue() does notclamp the index. This issue has also revealed that per queue visibilitycannot be accurate and will be replaced later as a new feature.While at it, add missing lock around qdisc_qstats_qlen_backlog(). Thefunction __ioam6_fill_trace_data() is called from both softirq andprocess contexts, hence the use of spin_lock_bh() here.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminatorWhen batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload vianlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()helper only zeroes alignment padding after the payload, not the payloaditself, so four bytes of stale kernel heap data are leaked to userspacein the NLMSG_DONE message body.Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializesthe nfgenmsg payload via nfnl_fill_hdr(), consistent with how__build_packet_message() already constructs NFULNL_MSG_PACKET headers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipvs: fix NULL deref in ip_vs_add_service error pathWhen ip_vs_bind_scheduler() succeeds in ip_vs_add_service(), the localvariable sched is set to NULL. If ip_vs_start_estimator() subsequentlyfails, the out_err cleanup calls ip_vs_unbind_scheduler(svc, sched)with sched == NULL. ip_vs_unbind_scheduler() passes the cur_sched NULLcheck (because svc->scheduler was set by the successful bind) but thendereferences the NULL sched parameter at sched->done_service, causing akernel panic at offset 0x30 from NULL. Oops: general protection fault, [..] [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] RIP: 0010:ip_vs_unbind_scheduler (net/netfilter/ipvs/ip_vs_sched.c:69) Call Trace: ip_vs_add_service.isra.0 (net/netfilter/ipvs/ip_vs_ctl.c:1500) do_ip_vs_set_ctl (net/netfilter/ipvs/ip_vs_ctl.c:2809) nf_setsockopt (net/netfilter/nf_sockopt.c:102) [..]Fix by simply not clearing the local sched variable after a successfulbind. ip_vs_unbind_scheduler() already detects whether a scheduler isinstalled via svc->scheduler, and keeping sched non-NULL ensures theerror path passes the correct pointer to both ip_vs_unbind_scheduler()and ip_vs_scheduler_put().While the bug is older, the problem popups in more recent kernels (6.2),when the new error path is taken after the ip_vs_start_estimator() call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm_user: fix info leak in build_mapping()struct xfrm_usersa_id has a one-byte padding hole after the protofield, which ends up never getting set to zero before copying out touserspace. Fix that up by zeroing out the whole structure beforesetting individual variables.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: Wait for RCU readers during policy netns exitxfrm_policy_fini() frees the policy_bydst hash tables after flushing thepolicy work items and deleting all policies, but it does not wait forconcurrent RCU readers to leave their read-side critical sections first.The policy_bydst tables are published via rcu_assign_pointer() and arelooked up through rcu_dereference_check(), so netns teardown must alsowait for an RCU grace period before freeing the table memory.Fix this by adding synchronize_rcu() before freeing the policy hash tables.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xsk: validate MTU against usable frame size on bindAF_XDP bind currently accepts zero-copy pool configurations withoutverifying that the device MTU fits into the usable frame space providedby the UMEM chunk.This becomes a problem since we started to respect tailroom which issubtracted from chunk_size (among with headroom). 2k chunk size mightnot provide enough space for standard 1500 MTU, so let us catch suchsettings at bind time. Furthermore, validate whether underlying HW willbe able to satisfy configured MTU wrt XSK's frame size multiplied bysupported Rx buffer chain length (that is exposed vianet_device::xdp_zc_max_segs).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xsk: tighten UMEM headroom validation to account for tailroom and min frameThe current headroom validation in xdp_umem_reg() could leave us withinsufficient space dedicated to even receive minimum-sized ethernetframe. Furthermore if multi-buffer would come to play thenskb_shared_info stored at the end of XSK frame would be corrupted.HW typically works with 128-aligned sizes so let us provide this valueas bare minimum.Multi-buffer setting is known later in the configuration process sobesides accounting for 128 bytes, let us also take care of tailroom spaceupfront.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: s3fwrn5: allocate rx skb before consuming bytess3fwrn82_uart_read() reports the number of accepted bytes to the serdevcore. The current code consumes bytes into recv_skb and may alreadydeliver a complete frame before allocating a fresh receive buffer.If that alloc_skb() fails, the callback returns 0 even though it hasalready consumed bytes, and it leaves recv_skb as NULL for the nextreceive callback. That breaks the receive_buf() accounting contract andcan also lead to a NULL dereference on the next skb_put_u8().Allocate the receive skb lazily before consuming the next byte instead.If allocation fails, return the number of bytes already accepted.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: icmp: fix null-ptr-deref in icmp_build_probe()ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when theIPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passingthis error pointer to dev_hold() will cause a kernel crash withnull-ptr-deref.Instead, silently discard the request. RFC 8335 does not appear todefine a specific response for the case where an IPv6 interfaceidentifier is syntactically valid but the implementation cannot performthe lookup at runtime, and silently dropping the request may safer thanmisreporting "No Such Interface".
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()We need to check __in6_dev_get() for possible NULL value, assuggested by Yiming Qian.Also add skb_dst_dev_rcu() instead of skb_dst_dev(),and two missing READ_ONCE().Note that @dev can't be NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: lapbether: handle NETDEV_PRE_TYPE_CHANGElapbeth_data_transmit() expects the underlying device typeto be ARPHRD_ETHER.Returning NOTIFY_BAD from lapbeth_device_event() makes surebonding driver can not break this expectation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/vc4: Fix a memory leak in hang state error pathWhen vc4_save_hang_state() encounters an early return condition, itreturns without freeing the previously allocated `kernel_state`,leaking memory.Add the missing kfree() calls by consolidating the early return pathsinto a single place.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/vc4: Fix memory leak of BO array in hang stateThe hang state's BO array is allocated separately with kzalloc() invc4_save_hang_state() but never freed in vc4_free_hang_state(). Add themissing kfree() for the BO array before freeing the hang state struct.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: account XFRMA_IF_ID in aevent size calculationxfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), thenbuild_aevent() appends attributes including XFRMA_IF_ID when x->if_id isset.xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For stateswith if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0)in xfrm_get_ae(), turning a malformed netlink interaction into a kernelpanic.Account XFRMA_IF_ID in the size calculation unconditionally and replacethe BUG_ON with normal error unwinding.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepathWhen cifs_sanitize_prepath is called with an empty string or a stringcontaining only delimiters (e.g., "/"), the current logic attempts tocheck *(cursor2 - 1) before cursor2 has advanced. This results in anout-of-bounds read.This patch adds an early exit check after stripping prependeddelimiters. If no path content remains, the function returns NULL.The bug was identified via manual audit and verified using astandalone test case compiled with AddressSanitizer, whichtriggered a SEGV on affected inputs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: wl1251: validate packet IDs before indexing tx_frameswl1251_tx_packet_cb() uses the firmware completion ID directly to indexthe fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from thecompletion block, and the callback does not currently verify that itfits the array before dereferencing it.Reject completion IDs that fall outside wl->tx_frames[] and keep theexisting NULL check in the same guard. This keeps the fix local to thetrust boundary and avoids touching the rest of the completion flow.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiryNew test case fails unexpectedly when avx2 matching functions are used.The test first loads a ranomly generated pipapo setwith 'ipv4 . port' key, i.e. nft -f foo.This works. Then, it reloads the set after a flush:(echo flush set t s; cat foo) | nft -f -This is expected to work, because its the same set after all and it wasalready loaded once.But with avx2, this fails: nft reports a clashing element.The reported clash is of following form: We successfully re-inserted a . b c . dThen we try to insert a . davx2 finds the already existing a . d, which (due to 'flush set') is markedas invalid in the new generation. It skips the element and moves to next.Due to incorrect masking, the skip-step finds the next matchingelement *only considering the first field*,i.e. we return the already reinserted "a . b", even though thelast field is different and the entry should not have been matched.No such error is reported for the generic c implementation (no avx2) or whenthe last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback.Bisection points to7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection")but that fix merely uncovers this bug.Before this commit, the wrong element is returned, but erronouslyreported as a full, identical duplicate.The root-cause is too early return in the avx2 match functions.When we process the last field, we should continue to process datauntil the entire input size has been consumed to make sure no stalebits remain in the map.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:srcu: Use irq_work to start GP in tiny SRCUTiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),which acquires the workqueue pool->lock.This causes a lockdep splat when call_srcu() is called with a schedulerlock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lockAlso add irq_work_sync() to cleanup_srcu_struct() to prevent ause-after-free if a queued irq_work fires after cleanup begins.Tested with rcutorture SRCU-T and no lockdep warnings.[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_workto start process_srcu()" ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ctnetlink: ensure safe access to master conntrackHolding reference on the expectation is not sufficient, the masterconntrack object can just go away, making exp->master invalid.To access exp->master safely:- Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away.- Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths.This patch goes for extending the nf_conntrack_expect_lock sectionto address this issue for simplicity, in the cases that are describedbelow this is just slightly extending the lock section.The add expectation command already holds a reference to the masterconntrack from ctnetlink_create_expect().However, the delete expectation command needs to grab the spinlockbefore looking up for the expectation. Expand the existing spinlocksection to address this to cover the expectation lookup. Note that,the nf_ct_expect_iterate_net() calls already grabs the spinlock whileiterating over the expectation table, which is correct.The get expectation command needs to grab the spinlock to ensure masterconntrack does not go away. This also expands the existing spinlocksection to cover the expectation lookup too. I needed to move thenetlink skb allocation out of the spinlock to keep it GFP_KERNEL.For the expectation events, the IPEXP_DESTROY event is already deliveredunder the spinlock, just move the delivery of IPEXP_NEW under thespinlock too because the master conntrack event cache is reached throughexp->master.While at it, add lockdep notations to help identify what codepaths needto grab the spinlock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()If overlay is used on top of btrfs, dentry->d_sb translates to overlay'ssuper block and fsid assignment will lead to a crash.Use file_inode(file)->i_sb to always get btrfs_sb.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbcon: check return value of con2fb_acquire_newinfo()If fbcon_open() fails when called from con2fb_acquire_newinfo() theninfo->fbcon_par pointer remains NULL which is later dereferenced.Add check for return value of the function con2fb_acquire_newinfo() toavoid it.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pstore: ram_core: fix incorrect success return when vmap() failsIn persistent_ram_vmap(), vmap() may return NULL on failure.If offset is non-zero, adding offset_in_page(start) causes the functionto return a non-NULL pointer even though the mapping failed.persistent_ram_buffer_map() therefore incorrectly returns success.Subsequent access to prz->buffer may dereference an invalid addressand cause crashes.Add proper NULL checking for vmap() failures.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dlm: validate length in dlm_search_rsb_treeThe len parameter in dlm_dump_rsb_name() is not validated and comesfrom network messages. When it exceeds DLM_RESNAME_MAXLEN, it cancause out-of-bounds write in dlm_search_rsb_tree().Add length validation to prevent potential buffer overflow.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/umem: Fix double dma_buf_unpin in failure pathIn ib_umem_dmabuf_get_pinned_with_dma_device(), the call toib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabufis immediately unpinned but the umem_dmabuf->pinned flag is stillset. Then, when ib_umem_release() is called, it callsib_umem_dmabuf_revoke() which will call dma_buf_unpin() again.Fix this by removing the immediate unpin upon failure and just letthe ib_umem_release/revoke path handle it. This also ensures theproper unmap-unpin unwind ordering if the dmabuf_map_pages callhappened to fail due to dma_resv_wait_timeout (and therefore hasa non-NULL umem_dmabuf->sgt).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ima: verify the previous kernel's IMA buffer lies in addressable RAMPatch series "Address page fault in ima_restore_measurement_list()", v3.When the second-stage kernel is booted via kexec with a limiting commandline such as "mem=" we observe a pafe fault that happens. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) not-present pageThis happens on x86_64 only, as this is already fixed in aarch64 incommit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-bufferagainst memory bounds")This patch (of 3):When the second-stage kernel is booted with a limiting command line (e.g. "mem="), the IMA measurement buffer handed over from the previouskernel may fall outside the addressable RAM of the new kernel. Accessingsuch a buffer can fault during early restore.Introduce a small generic helper, ima_validate_range(), which verifiesthat a physical [start, end] range for the previous-kernel IMA buffer lieswithin addressable memory: - On x86, use pfn_range_is_mapped(). - On OF based architectures, use page_is_ram().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable modeCommit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidationrequest when device is disconnected") relies onpci_dev_is_disconnected() to skip ATS invalidation forsafely-removed devices, but it does not cover link-down causedby faults, which can still hard-lock the system.For example, if a VM fails to connect to the PCIe device,"virsh destroy" is executed to release resources and isolatethe fault, but a hard-lockup occurs while releasing the group fd.Call Trace: qi_submit_sync qi_flush_dev_iotlb intel_pasid_tear_down_entry device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fputAlthough pci_device_is_present() is slower thanpci_dev_is_disconnected(), it still takes only ~70 ?s on aConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speedand width increase.Besides, devtlb_invalidation_with_pasid() is called only in thepaths below, which are far less frequent than memory map/unmap.1. mm-struct release2. {attach,release}_dev3. set/remove PASID4. dirty-tracking setupThe gain in system stability far outweighs the negligible costof using pci_device_is_present() instead of pci_dev_is_disconnected()to decide when to skip ATS invalidation, especially under GDRhigh-load conditions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm-verity: correctly handle dm_bufio_client_create() failureIf either of the calls to dm_bufio_client_create() in verity_fec_ctr()fails, then dm_bufio_client_destroy() is later called with an ERR_PTR()argument. That causes a crash. Fix this.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulationCommit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmloadof guest state") made KVM always use vmcb01 for the fields controlled byVMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation codeto always use vmcb01.As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is notintercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01instead of the current VMCB.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQThis adds a check for encryption key size upon receivingL2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C whichexpects L2CAP_CR_LE_BAD_KEY_SIZE.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: cx23885: Add missing unmap in snd_cx23885_hw_params()In error path, add cx23885_alsa_dma_unmap() to release theresource acquired by cx23885_alsa_dma_map().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()Do not crash when a report has no fields.Fake USB gadgets can send their own HID report descriptors and can define reportstructures without valid fields. This can be used to crash the kernel over USB.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: SOF: Intel: hda: Fix NULL pointer dereferenceIf there's a mismatch between the DAI links in the machine driver andthe topology, it is possible that the playback/capture widget is notset, especially in the case of loopback capture for echo referencewhere we use the dummy DAI link. Return the error when the widget is notset to avoid a null pointer dereference like below when the topology isbroken.RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm6: fix uninitialized saddr in xfrm6_get_saddr()xfrm6_get_saddr() does not check the return value ofipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitablesource address (returns -EADDRNOTAVAIL), saddr->in6 is leftuninitialized, but xfrm6_get_saddr() still returns 0 (success).This causes the caller xfrm_tmpl_resolve_one() to use the uninitializedaddress in xfrm_state_find(), triggering KMSAN warning:=====================================================BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7fLocal variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770=====================================================Fix by checking the return value of ipv6_dev_get_saddr() and propagatingthe error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mfd: core: Add locking around 'mfd_of_node_list'Manipulating a list in the kernel isn't safe without some sort ofmutual exclusion. Add a mutex any time we access / modify'mfd_of_node_list' to prevent possible crashes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove lockingwhen enabling/disabling SR-IOV"), which causes a deadlock by recursivelytaking pci_rescan_remove_lock when sriov_del_vfs() is called as part ofpci_stop_and_remove_bus_device(). For example with the following sequenceof commands: $ echo
> /sys/bus/pci/devices//sriov_numvfs $ echo 1 > /sys/bus/pci/devices//removeA trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acquire lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140 but task is already holding lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80 ... Call Trace: [<00000259778c4f90>] dump_stack_lvl+0xc0/0x110 [<00000259779c844e>] print_deadlock_bug+0x31e/0x330 [<00000259779c1908>] __lock_acquire+0x16c8/0x32f0 [<00000259779bffac>] lock_acquire+0x14c/0x350 [<00000259789643a6>] __mutex_lock_common+0xe6/0x1520 [<000002597896413c>] mutex_lock_nested+0x3c/0x50 [<00000259784a07e4>] sriov_disable+0x34/0x140 [<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core] [<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core] [<00000259784857fc>] pci_device_remove+0x3c/0xa0 [<000002597851012e>] device_release_driver_internal+0x18e/0x280 [<000002597847ae22>] pci_stop_bus_device+0x82/0xa0 [<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80 [<00000259784972c2>] remove_store+0x72/0x90 [<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200 [<0000025977d7241c>] vfs_write+0x24c/0x300 [<0000025977d72696>] ksys_write+0x86/0x110 [<000002597895b61c>] __do_syscall+0x14c/0x400 [<000002597896e0ee>] system_call+0x6e/0x90This alone is not a complete fix as it restores the issue the cited committried to solve. A new fix will be provided as a follow on.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()As kcalloc() may fail, check its return value to avoid a NULL pointerdereference when passing it to of_property_read_u32_array().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()The priv->rx_buffer and priv->tx_buffer are alloc'd together ascontiguous buffers in uhdlc_init() but freed as two buffers inuhdlc_memclean().Change the cleanup to only call dma_free_coherent() once on the wholebuffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: hid-pl: handle probe errorsErrors in init must be reported back or we'llfollow a NULL pointer the first time FF is used.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: pegasus: enable basic endpoint checkingpegasus_probe() fills URBs with hardcoded endpoint pipes withoutverifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interruptsA malformed USB device can present these endpoints with transfer typesthat differ from what the driver assumes.Add a pegasus_usb_ep enum for endpoint numbers, replacing magicconstants throughout. Add usb_check_bulk_endpoints() andusb_check_int_endpoints() calls before any resource allocation toverify endpoint types before use, rejecting devices with mismatcheddescriptors at probe time, and avoid triggering assertion.Similar fix to- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")- commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking")
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-af: CGX: fix bitmap leaksThe RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().Unbinding and rebinding the driver therefore triggers kmemleak: unreferenced object (size 16): backtrace: rvu_alloc_bitmap cgx_probeFree both bitmaps during teardown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix null dereference in find_networkThe variable pwlan has the possibility of being NULL when passed intortw_free_network_nolock() which would later dereference the variable.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable modePCIe endpoints with ATS enabled and passed through to userspace(e.g., QEMU, DPDK) can hard-lock the host when their link drops,either by surprise removal or by a link fault.Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidationrequest when device is disconnected") adds pci_dev_is_disconnected()to devtlb_invalidation_with_pasid() so ATS invalidation is skippedonly when the device is being safely removed, but it applies onlywhen Intel IOMMU scalable mode is enabled.With scalable mode disabled or unsupported, a system hard-lockoccurs when a PCIe endpoint's link drops because the Intel IOMMUwaits indefinitely for an ATS invalidation that cannot complete.Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 domain_context_clear_one_cb pci_for_each_dma_alias device_block_translation blocking_domain_attach_dev iommu_deinit_device __iommu_group_remove_device iommu_release_device iommu_bus_notifier blocking_notifier_call_chain bus_notify device_del pci_remove_bus_device pci_stop_and_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_istCommit 81e921fd3216 ("iommu/vt-d: Fix NULL domain on device release")adds intel_pasid_teardown_sm_context() to intel_iommu_release_device(),which calls qi_flush_dev_iotlb() and can also hard-lock the systemwhen a PCIe endpoint's link drops.Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 intel_context_flush_no_pasid device_pasid_table_teardown pci_pasid_table_teardown pci_for_each_dma_alias intel_pasid_teardown_sm_context intel_iommu_release_device iommu_deinit_device __iommu_group_remove_device iommu_release_device iommu_bus_notifier blocking_notifier_call_chain bus_notify device_del pci_remove_bus_device pci_stop_and_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_istSometimes the endpoint loses connection without a link-down event(e.g., due to a link fault); killing the process (virsh destroy)then hard-locks the host.Call Trace: qi_submit_sync qi_flush_dev_iotlb __context_flush_dev_iotlb.part.0 domain_context_clear_one_cb pci_for_each_dma_alias device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fputpci_dev_is_disconnected() only covers safe-removal paths;pci_device_is_present() tests accessibility by readingvendor/device IDs and internally calls pci_dev_is_disconnected().On a ConnectX-5 (8 GT/s, x2) this costs ~70 ?s.Since __context_flush_dev_iotlb() is only called on{attach,release}_dev paths (not hot), add pci_device_is_present()there to skip inaccessible devices and avoid the hard-lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: tegra-video: Fix memory leak in __tegra_channel_try_format()The state object allocated by __v4l2_subdev_state_alloc() must be freedwith __v4l2_subdev_state_free() when it is no longer needed.In __tegra_channel_try_format(), two error paths return directly afterv4l2_subdev_call() fails, without freeing the allocated 'sd_state'object. This violates the requirement and causes a memory leak.Fix this by introducing a cleanup label and using goto statements in theerror paths to ensure that __v4l2_subdev_state_free() is always calledbefore the function returns.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md/bitmap: fix GPF in write_page caused by resize raceA General Protection Fault occurs in write_page() during array resize:RIP: 0010:write_page+0x22b/0x3c0 [md_mod]This is a use-after-free race between bitmap_daemon_work() and__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`without locking, while the resize path frees that storage viamd_bitmap_file_unmap(). `quiesce()` does not stop the md thread,allowing concurrent access to freed pages.Fix by holding `mddev->bitmap_info.mutex` during the bitmap update.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: always flush state and policy upon NETDEV_UNREGISTER eventsyzbot is reporting that "struct xfrm_state" refcount is leaking. unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2 ref_tracker: netdev@ffff888052f24618 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_tracker_alloc include/linux/netdevice.h:4412 [inline] xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316 xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline] xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022 xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550 xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2646 __sys_sendmsg+0x16d/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fThis is because commit d77e38e612a0 ("xfrm: Add an IPsec hardwareoffloading API") implemented xfrm_dev_unregister() as no-op despitexfrm_dev_state_add() from xfrm_state_construct() acquires a referenceto "struct net_device".I guess that that commit expected that NETDEV_DOWN event is fired beforeNETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add()is called only if (dev->features & NETIF_F_HW_ESP) != 0.Sabrina Dubroca identified steps to reproduce the same symptoms as below. echo 0 > /sys/bus/netdevsim/new_device dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/) ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \ spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \ offload crypto dev $dev dir out ethtool -K $dev esp-hw-offload off echo 0 > /sys/bus/netdevsim/del_deviceLike these steps indicate, the NETIF_F_HW_ESP bit can be cleared afterxfrm_dev_state_add() acquired a reference to "struct net_device".Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bitwhen acquiring a reference to "struct net_device".Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device")re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but thatcommit for unknown reason chose to share xfrm_dev_down() between theNETDEV_DOWN event and the NETDEV_UNREGISTER event.I guess that that commit missed the behavior in the previous paragraph.Therefore, we need to re-introduce xfrm_dev_unregister() in order torelease the reference to "struct net_device" by unconditionally flushingstate and policy.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: fix reflink preserve cleanup issuecommit c06c303832ec ("ocfs2: fix xattr array entry __counted_by error")doesn't handle all cases and the cleanup job for preserved xattr entriesstill has bug:- the 'last' pointer should be shifted by one unit after cleanup an array entry.- current code logic doesn't cleanup the first entry when xh_count is 1.Note, commit c06c303832ec is also a bug fix for 0fe9b66c65f3.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/buddy: Prevent BUG_ON by validating rounded allocationWhen DRM_BUDDY_CONTIGUOUS_ALLOCATION is set, the requested size isrounded up to the next power-of-two via roundup_pow_of_two().Similarly, for non-contiguous allocations with large min_block_size,the size is aligned up via round_up(). Both operations can produce arounded size that exceeds mm->size, which later triggersBUG_ON(order > mm->max_order).Example scenarios:- 9G CONTIGUOUS allocation on 10G VRAM memory: roundup_pow_of_two(9G) = 16G > 10G- 9G allocation with 8G min_block_size on 10G VRAM memory: round_up(9G, 8G) = 16G > 10GFix this by checking the rounded size against mm->size. Fornon-contiguous or range allocations where size > mm->size is invalid,return -EINVAL immediately. For contiguous allocations without rangerestrictions, allow the request to fall through to the existing__alloc_contig_try_harder() fallback.This ensures invalid user input returns an error or uses the fallbackpath instead of hitting BUG_ON.v2: (Matt A)- Add Fixes, Cc stable, and Closes tags for context
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: dwc3: gadget: Move vbus draw to workqueue contextCurrently dwc3_gadget_vbus_draw() can be called from atomiccontext, which in turn invokes power-supply-core APIs. Andsome these PMIC APIs have operations that may sleep, leadingto kernel panic.Fix this by moving the vbus_draw into a workqueue context.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:EFI/CPER: don't dump the entire memory regionThe current logic at cper_print_fw_err() doesn't check if theerror record length is big enough to handle offset. On a bad firmware,if the ofset is above the actual record, length -= offset willunderflow, making it dump the entire memory.The end result can be: - the logic taking a lot of time dumping large regions of memory; - data disclosure due to the memory dumps; - an OOPS, if it tries to dump an unmapped memory region.Fix it by checking if the section length is too small before doinga hex dump.[ rjw: Subject tweaks ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: iwlwifi: fix 22000 series SMEM parsingIf the firmware were to report three LMACs (which doesn'texist in hardware) then using "fwrt->smem_cfg.lmac[2]" isan overrun of the array. Reject such and use IWL_FW_CHECKinstead of WARN_ON in this function.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: xscale: Check for PTP support properlyIn ixp4xx_get_ts_info() ixp46x_ptp_find() is calledunconditionally despite this feature only existing onixp46x, leading to the following splat from tcpdump:root@OpenWrt:~# tcpdump -vv -X -i eth0(...)Unable to handle kernel NULL pointer dereference at virtual address 00000238 when read(...)Call trace: ptp_clock_index from ixp46x_ptp_find+0x1c/0x38 ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64 ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108 __ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648 __dev_ethtool from dev_ethtool+0x160/0x234 dev_ethtool from dev_ioctl+0x2cc/0x460 dev_ioctl from sock_ioctl+0x1ec/0x524 sock_ioctl from sys_ioctl+0x51c/0xa94 sys_ioctl from ret_fast_syscall+0x0/0x44 (...)Segmentation faultCheck for ixp46x in ixp46x_ptp_find() before trying to set upPTP to avoid this.To avoid altering the returned error code from ixp4xx_hwtstamp_set()which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPPfrom ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matterthe error code. The helper function ixp46x_ptp_find() helperreturns -ENODEV.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_modekaweth_set_rx_mode(), the ndo_set_rx_mode callback, callsnetif_stop_queue() and netif_wake_queue(). These are TX queue flowcontrol functions unrelated to RX multicast configuration.The premature netif_wake_queue() can re-enable TX while tx_urb is stillin-flight, leading to a double usb_submit_urb() on the same URB:kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb);}kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done}kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active}This triggers the WARN in usb_submit_urb(): "URB submitted while active"This is a similar class of bug fixed in rtl8150 by- commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").Also kaweth_set_rx_mode() is already functionally broken, thereal set_rx_mode action is performed by kaweth_async_set_rx_mode(),which in turn is not a no-op only at ndo_open() time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: ccs: Avoid possible division by zeroCalculating maximum M for scaler configuration involves dividing byMIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumablynon-zero, the driver was missing the check it in fact was. Fix this.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35[Why]A backport of the change made for DCN401 that addresses an issue wherewe turn off the PHY PLL when disabling TMDS output, which causes theOTG to remain stuck.The OTG being stuck can lead to a hang in the DCHVM's ability to ACKinvalidations when it thinks the HUBP is still on but it's not receivingglobal sync.The transition to PLL_ON needs to be atomic as there's no guaranteethat the thread isn't pre-empted or is able to complete before theIOMMU watchdog times out.[How]Backport the implementation from dcn401 back to dcn35.There's a functional difference in when the eDP output is disabled indcn401 code so we don't want to utilize it directly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: consume xmit errors of GSO framesudpgro_frglist.sh and udpgro_bench.sh are the flakiest testscurrently in NIPA. They fail in the same exact way, TCP GROtest stalls occasionally and the test gets killed after 10min.These tests use veth to simulate GRO. They attach a trivial("return XDP_PASS;") XDP program to the veth to force TSO offand NAPI on.Digging into the failure mode we can see that the connectionis completely stuck after a burst of drops. The sender's snd_nxtis at sequence number N [1], but the receiver claims to havereceived (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzleis that senders rtx queue is not empty (let's say the block inthe rtx queue is at sequence number N - 4 * MSS [3]).In this state, sender sends a retransmission from the rtx queuewith a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].Receiver sees it and responds with an ACK all the way up toN + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATAbecause it has no recollection of ever sending data that far out [1].And we are stuck.The root cause is the mess of the xmit return codes. veth returnsan error when it can't xmit a frame. We end up with a loss eventlike this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok | ok ok ok \\ snd_nxt"x" means packet lost by veth, and "ok" means it went thru.Since veth has TSO disabled in this test it sees individual segments.Segment 1 is on the retransmit queue and will be resent.So why did the sender not advance snd_nxt even tho it clearly didsend up to seg 8? tcp_write_xmit() interprets the return codefrom the core to mean that data has not been sent at all. SinceTCP deals with GSO super frames, not individual segment the cruxof the problem is that loss of a single segment can be interpretedas loss of all. TCP only sees the last return code for the lastsegment of the GSO frame (in <> brackets in the diagram above).Of course for the problem to occur we need a setup or a devicewithout a Qdisc. Otherwise Qdisc layer disconnects the protocollayer from the device errors completely.We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix?Similar fix has been proposed by Eric in the past but never committedbecause original reporter was working with an OOT driver and wasn'tproviding feedback (see Link).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:soc: ti: pruss: Fix double free in pruss_clk_mux_setup()In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectlycalls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)on the error path. However, after the devm_add_action_or_reset()returns, the of_node_put(clk_mux_np) is called again, causing a doublefree.Fix by returning directly, to avoid the duplicate of_node_put().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address queryFix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() byreplacing mlx5_query_mac_address() with ether_addr_copy() to get thelocal MAC address directly from netdev->dev_addr.The issue occurs because mlx5_query_mac_address() queries the hardwarewhich involves mlx5_cmd_exec() that can sleep, but it is called fromthe mlx5e_ipsec_handle_event workqueue which runs in atomic context.The MAC address is already available in netdev->dev_addr, so no needto query hardware. This avoids the sleeping call and resolves the bug.Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functionsstruct configfs_item_operations callbacks are defined like the following: int (*allow_link)(struct config_item *src, struct config_item *target); void (*drop_link)(struct config_item *src, struct config_item *target);While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specifythe parameters in the correct order, pci_primary_epc_epf_unlink() andpci_secondary_epc_epf_unlink() specify the parameters in the wrong order,leading to the below kernel crash when using the unlink command inconfigfs: Unable to handle kernel paging request at virtual address 0000000300000857 Mem abort info: ... pc : string+0x54/0x14c lr : vsnprintf+0x280/0x6e8 ... string+0x54/0x14c vsnprintf+0x280/0x6e8 vprintk_default+0x38/0x4c vprintk+0xc4/0xe0 pci_epf_unbind+0xdc/0x108 configfs_unlink+0xe0/0x208+0x44/0x74 vfs_unlink+0x120/0x29c __arm64_sys_unlinkat+0x3c/0x90 invoke_syscall+0x48/0x134 do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0[mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: vt8500lcdfb: fix missing dma_free_coherent()fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is notfreed if the error path is reached.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: qcom: q6asm: drop DSP responses for closed data streams'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responsesafter closing")' attempted to ignore DSP responses arrivingafter a stream had been closed.However, those responses were still handled, causing lockups.Fix this by unconditionally dropping all DSP responses associated withclosed data streams.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dpaa2-switch: validate num_ifs to prevent out-of-bounds writeThe driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()but never validates it against DPSW_MAX_IF (64). This value controlsiteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indicesinto the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reportsnum_ifs >= 64, the loop can write past the array bounds.Add a bound check for num_ifs in dpaa2_switch_init().dpaa2_switch_fdb_get_flood_cfg() appends the control interface (portnum_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and allports match the flood filter, the loop fills all 64 slots and the controlinterface write overflows by one entry.The check uses >= because num_ifs == DPSW_MAX_IF is also functionallybroken.build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: mtk-mdp: Fix error handling in probe functionAdd mtk_mdp_unregister_m2m_device() on the error handling path to preventresource leak.Add check for the return value of vpu_get_plat_device() to prevent nullpointer dereference. And vpu_get_plat_device() increases the referencecount of the returned platform device. Add platform_device_put() toprevent reference leak.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: Fix pci_slot_trylock() error handlingCommit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()")delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() inpci_slot_trylock(), but it forgets to remove the correspondingpci_dev_unlock() when pci_bus_trylock() fails.Before a4e772898f8b, the code did: if (!pci_dev_trylock(dev)) /* <- lock bridge device */ goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); /* <- unlock bridge device */ goto unlock; } }After a4e772898f8b the bridge-device lock is no longer taken, but thepci_dev_unlock(dev) on the failure path was left in place, leading to thebug.This yields one of two errors: 1. A warning that the lock is being unlocked when no one holds it. 2. An incorrect unlock of a lock that belongs to another thread.Fix it by removing the now-redundant pci_dev_unlock(dev) on the failurepath.[Same patch later posted by Keith athttps://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw89: pci: validate sequence number of TX release reportHardware rarely reports abnormal sequence number in TX release report,which will access out-of-bounds of wd_ring->pages array, causing NULLpointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U 6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1) Call Trace: rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)] rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)] net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759 handle_softirqs+0xbe/0x290 kernel/softirq.c:601 ? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)] __local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423 rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)] ? irq_thread+0xa7/0x340 kernel/irq/manage.c:0 irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314 ? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202 ? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220 kthread+0xea/0x110 kernel/kthread.c:376 ? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287 ? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 To prevent crash, validate rpp_info.seq before using.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: Drop the lock in skb_may_tx_timestamp()skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock mustnot be taken in IRQ context, only softirq is okay. A few drivers receivethe timestamp via a dedicated interrupt and complete the TX timestampfrom that handler. This will lead to a deadlock if the lock is alreadywrite-locked on the same CPU.Taking the lock can be avoided. The socket (pointed by the skb) willremain valid until the skb is released. The ->sk_socket and ->filemember will be set to NULL once the user closes the socket which mayhappen before the timestamp arrives.If we happen to observe the pointer while the socket is closing butbefore the pointer is set to NULL then we may use it because bothpointer (and the file's cred member) are RCU freed.Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add amatching WRITE_ONCE() where the pointer are cleared.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: cpsw_new: Fix potential unregister of netdev that has not been registered yetIf an error occurs during register_netdev() for the first MAC incpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,cpsw->slaves[1].ndev would remain unchanged. This could later causecpsw_unregister_ports() to attempt unregistering the second MAC.To address this, add a check for ndev->reg_state before callingunregister_netdev(). With this change, setting cpsw->slaves[i].ndevto NULL becomes unnecessary and can be removed accordingly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi: ipmb: initialise event handler read bytesIPMB doesn't use i2c reads, but the handler needs to set a value.Otherwise an i2c read will return an uninitialised value from the busdriver.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix memory leak on failure pathcfg80211_inform_bss_frame() may return NULL on failure. In that case,the allocated buffer 'buf' is not freed and the function returns early,leading to potential memory leak.Fix this by ensuring that 'buf' is freed on both success and failure paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/rds: No shortcut out of RDS_CONN_ERRORRDS connections carry a state "rds_conn_path::cp_state"and transitions from one state to another and are conditionalupon an expected state: "rds_conn_path_transition."There is one exception to this conditionality, which is"RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop"regardless of what state the condition is currently in.But as soon as a connection enters state "RDS_CONN_ERROR",the connection handling code expects it to go through theshutdown-path.The RDS/TCP multipath changes added a shortcut out of"RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING"via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change").A subsequent "rds_tcp_reset_callbacks" can then transitionthe state to "RDS_CONN_RESETTING" with a shutdown-worker queued.That'll trip up "rds_conn_init_shutdown", which wasnever adjusted to handle "RDS_CONN_RESETTING" and subsequentlydrops the connection with the dreaded "DR_INV_CONN_STATE",which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever.So we do two things here:a) Don't shortcut "RDS_CONN_ERROR", but take the longer path through the shutdown code.b) Add "RDS_CONN_RESETTING" to the expected states in "rds_conn_init_shutdown" so that we won't error out and get stuck, if we ever hit weird state transitions like this again."
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:clocksource/drivers/sh_tmu: Always leave device running after probeThe TMU device can be used as both a clocksource and a clockeventprovider. The driver tries to be smart and power itself on and off, aswell as enabling and disabling its clock when it's not in operation.This behavior is slightly altered if the TMU is used as an earlyplatform device in which case the device is left powered on after probe,but the clock is still enabled and disabled at runtime.This has worked for a long time, but recent improvements in PREEMPT_RTand PROVE_LOCKING have highlighted an issue. As the TMU registers itselfas a clockevent provider, clockevents_register_device(), it needs to useraw spinlocks internally as this is the context of which the clockeventframework interacts with the TMU driver. However in the context ofholding a raw spinlock the TMU driver can't really manage its powerstate or clock with calls to pm_runtime_*() and clk_*() as these callsend up in other platform drivers using regular spinlocks to controlpower and clocks.This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90For non-PREEMPT_RT builds this is not really an issue, but forPREEMPT_RT builds where normal spinlocks can sleep this might be anissue. Be cautious and always leave the power and clock running afterprobe.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/rds: Clear reconnect pending bitWhen canceling the reconnect worker, care must be taken to reset thereconnect-pending bit. If the reconnect worker has not yet beenscheduled before it is canceled, the reconnect-pending bit will stayon forever.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: radio-keene: fix memory leak in error pathFix a memory leak in usb_keene_probe(). The v4l2 control handler isinitialized and controls are added, but if v4l2_device_register() orvideo_register_device() fails afterward, the handler was never freed,leaking memory.Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensurethe control handler is properly freed for all error paths after it isinitialized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: wan: farsync: Fix use-after-free bugs caused by unfinished taskletsWhen the FarSync T-series card is being detached, the fst_card_info isdeallocated in fst_remove_one(). However, the fst_tx_task or fst_int_taskmay still be running or pending, leading to use-after-free bugs when thealready freed fst_card_info is accessed in fst_process_tx_work_q() orfst_process_int_work_q().A typical race condition is depicted below:CPU 0 (cleanup) | CPU 1 (tasklet) | fst_start_xmit()fst_remove_one() | tasklet_schedule() unregister_hdlc_device()| | fst_process_tx_work_q() //handler kfree(card) //free | do_bottom_half_tx() | card-> //useThe following KASAN trace was captured:================================================================== BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00 Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32 ... Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcb/0x5d0 ? do_bottom_half_tx+0xb88/0xd00 kasan_report+0xb8/0xf0 ? do_bottom_half_tx+0xb88/0xd00 do_bottom_half_tx+0xb88/0xd00 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx___hrtimer_run_queues+0x10/0x10 fst_process_tx_work_q+0x67/0x90 tasklet_action_common+0x1fa/0x720 ? hrtimer_interrupt+0x31f/0x780 handle_softirqs+0x176/0x530 __irq_exit_rcu+0xab/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 41 on cpu 3 at 72.330843s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 __kasan_kmalloc+0x7f/0x90 fst_add_one+0x1a5/0x1cd0 local_pci_probe+0xdd/0x190 pci_device_probe+0x341/0x480 really_probe+0x1c6/0x6a0 __driver_probe_device+0x248/0x310 driver_probe_device+0x48/0x210 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x101/0x190 __device_attach+0x198/0x3a0 device_initial_probe+0x78/0xa0 pci_bus_add_device+0x81/0xc0 pci_bus_add_devices+0x7e/0x190 enable_slot+0x9b9/0x1130 acpiphp_check_bridge.part.0+0x2e1/0x460 acpiphp_hotplug_notify+0x36c/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... Freed by task 41 on cpu 1 at 75.138639s: kasan_save_stack+0x24/0x50 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x135/0x410 fst_remove_one+0x2ca/0x540 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0x364/0x530 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device+0xd/0x20 disable_slot+0x116/0x260 acpiphp_disable_and_eject_slot+0x4b/0x190 acpiphp_hotplug_notify+0x230/0x3c0 acpi_device_hotplug+0x203/0xb10 acpi_hotplug_work_fn+0x59/0x80 ... The buggy address belongs to the object at ffff88800aad1000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 28 bytes inside of freed 1024-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x100000000000040(head|node=0|zone=1) page_type: f5(slab) raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88800aad1000: fa fb---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_h323: fix OOB read in decode_choice()In decode_choice(), the boundary check before get_len() uses thevariable `len`, which is still 0 from its initialization at the top ofthe function: unsigned int type, ext, len = 0; ... if (ext || (son->attr & OPEN)) { BYTE_ALIGN(bs); if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */ return H323_ERROR_BOUND; len = get_len(bs); /* OOB read */When the bitstream is exactly consumed (bs->cur == bs->end), the checknf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),which is false. The subsequent get_len() call then dereferences*bs->cur++, reading 1 byte past the end of the buffer. If that bytehas bit 7 set, get_len() reads a second byte as well.This can be triggered remotely by sending a crafted Q.931 SETUP messagewith a User-User Information Element containing exactly 2 bytes ofPER-encoded data ({0x08, 0x00}) to port 1720 through a firewall withthe nf_conntrack_h323 helper active. The decoder fully consumes thePER buffer before reaching this code path, resulting in a 1-2 byteheap-buffer-overflow read confirmed by AddressSanitizer.Fix this by checking for 2 bytes (the maximum that get_len() may read)instead of the uninitialized `len`. This matches the pattern used atevery other get_len() call site in the same file, where the callerchecks for 2 bytes of available data before calling get_len().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:team: avoid NETDEV_CHANGEMTU event when unregistering slavesyzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline] netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886 netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907 dev_set_mtu+0x126/0x260 net/core/dev_api.c:248 team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333 team_del_slave drivers/net/team/team_core.c:1936 [inline] team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2281 [inline] call_netdevice_notifiers net/core/dev.c:2295 [inline] __dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592 do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894problem. Ido Schimmel found steps to reproduce ip link add name team1 type team ip link add name dummy1 mtu 1499 master team1 type dummy ip netns add ns1 ip link set dev dummy1 netns ns1 ip -n ns1 link del dev dummy1and also found that the same issue was fixed in the bond driver incommit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event whenunregistering slave").Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:hold netdev instance lock during sysfs operations") and commit 303a8487a657("net: s/__dev_set_mtu/__netif_set_mtu/") also applied.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after releaseThe atmel_hlcdc_plane_atomic_duplicate_state() callback was copyingthe atmel_hlcdc_plane state structure without properly duplicating thedrm_plane_state. In particular, state->commit remained set to the oldstate commit, which can lead to a use-after-free in the nextdrm_atomic_commit() call.Fix this by calling__drm_atomic_helper_duplicate_plane_state(), which correctly clonesthe base drm_plane_state (including the ->commit pointer).It has been seen when closing and re-opening the device node whileanother DRM client (e.g. fbdev) is still attached:=============================================================================BUG kmalloc-64 (Not tainted): Poison overwritten-----------------------------------------------------------------------------0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6bFIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6bAllocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0pid=29 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_framebuffer_remove+0x4cc/0x5a8 drm_mode_rmfb_work_fn+0x6c/0x80 process_one_work+0x12c/0x2cc worker_thread+0x2a8/0x400 kthread+0xc0/0xdc ret_from_fork+0x14/0x28Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0pid=169 drm_atomic_helper_commit_hw_done+0x100/0x150 drm_atomic_helper_commit_tail+0x64/0x8c commit_tail+0x168/0x18c drm_atomic_helper_commit+0x138/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0flags=0x200(workingset|zone=0)Object 0xc611b340 @offset=832 fp=0xc611b7c0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: act_skbedit: fix divide-by-zero in tcf_skbedit_hash()Commit 38a6f0865796 ("net: sched: support hash selecting tx queue")added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size iscomputed as:mapping_mod = queue_mapping_max - queue_mapping + 1;The range size can be 65536 when the requested range covers all possibleu16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX).That value cannot be represented in a u16 and previously wrapped to 0,so tcf_skbedit_hash() could trigger a divide-by-zero:queue_mapping += skb_get_hash(skb) % params->mapping_mod;Compute mapping_mod in a wider type and reject ranges larger than U16_MAXto prevent params->mapping_mod from becoming 0 and avoid the crash.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: prevent races in ->query_interfaces()It was possible for two query interface works to be concurrently tryingto update the interfaces.Prevent this by checking and updating iface_last_update underiface_lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/kexec: add a sanity check on previous kernel's ima kexec bufferWhen the second-stage kernel is booted via kexec with a limiting commandline such as "mem=", the physical range that contains the carriedover IMA measurement list may fall outside the truncated RAM leading to akernel panic. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) - not-present pageOther architectures already validate the range with page_is_ram(), as donein commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-bufferagainst memory bounds") do a similar check on x86.Without carrying the measurement list across kexec, the attestationwould fail.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:soc: ti: k3-socinfo: Fix regmap leak on probe failureThe mmio regmap allocated during probe is never freed.Switch to using the device managed allocator so that the regmap isreleased on probe failures (e.g. probe deferral) and on driver unbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:kcm: fix zero-frag skb in frag_list on partial sendmsg errorSyzkaller reported a warning in kcm_write_msgs() when processing amessage with a zero-fragment skb in the frag_list.When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,it allocates a new skb (tskb) and links it into the frag_list beforecopying data. If the copy subsequently fails (e.g. -EFAULT fromuser memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+For SOCK_SEQPACKET with partial data already copied, the error pathsaves this message via partial_message for later completion. ForSOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so asubsequent zero-length write(fd, NULL, 0) completes the message andqueues it to sk_write_queue. kcm_write_msgs() then walks thefrag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags)TCP has a similar pattern where skbs are enqueued before data copyand cleaned up on failure via tcp_remove_empty_skb(). KCM wasmissing the equivalent cleanup.Fix this by tracking the predecessor skb (frag_prev) when allocatinga new frag_list entry. On error, if the tail skb has zero frags,use frag_prev to unlink and free it in O(1) without walking thesingly-linked frag_list. frag_prev is safe to dereference becausethe entire message chain is only held locally (or in kcm->seq_skb)and is not added to sk_write_queue until MSG_EOR, so the send pathcannot free it underneath us.Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the logif the condition is somehow hit repeatedly.There are currently no KCM selftests in the kernel tree; a simplereproducer is available at [1].[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: i2c/tw9906: Fix potential memory leak in tw9906_probe()In one of the error paths in tw9906_probe(), the memory allocated inv4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix thatby calling v4l2_ctrl_handler_free() on the handler in that error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vhost: move vdpa group bound check to vhost_vdpaRemove duplication by consolidating these here. This reduces theposibility of a parent driver missing them.While we're at it, fix a bug in vdpa_sim where a valid ASID can beassigned to a group equal to ngroups, causing an out of bound write.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: pm: in-kernel: always set ID as avail when rm endpSyzkaller managed to find a combination of actions that was generatingthis warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: cx88: Add missing unmap in snd_cx88_hw_params()In error path, add cx88_alsa_dma_unmap() to releaseresource acquired by cx88_alsa_dma_map().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: Add support for TSV110 Spectre-BHB mitigationThe TSV110 processor is vulnerable to the Spectre-BHB (Branch HistoryBuffer) attack, which can be exploited to leak information throughbranch prediction side channels. This commit adds the MIDR of TSV110to the list for software mitigation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: fiemap page fault fixIn gfs2_fiemap(), we are calling iomap_fiemap() while holding the inodeglock. This can lead to recursive glock taking if the fiemap buffer ismemory mapped to the same inode and accessing it triggers a page fault.Fix by disabling page faults for iomap_fiemap() and faulting in thebuffer by hand if necessary.Fixes xfstest generic/742.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:EFI/CPER: don't go past the ARM processor CPER record bufferThere's a logic inside GHES/CPER to detect if the section_lengthis too small, but it doesn't detect if it is too big.Currently, if the firmware receives an ARM processor CPER recordstating that a section length is big, kernel will blindly trustsection_length, producing a very long dump. For instance, a 67bytes record with ERR_INFO_NUM set 46198 and section lengthset to 854918320 would dump a lot of data going a way past thefirmware memory-mapped area.Fix it by adding a logic to prevent it to go past the bufferif ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198[ rjw: Subject and changelog tweaks ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove()In mtk_mdp_probe(), vpu_get_plat_device() increases the referencecount of the returned platform device. Add platform_device_put()to prevent reference leak.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: supply snapshot context in ceph_zero_partial_object()The ceph_zero_partial_object function was missing proper snapshotcontext for its OSD write operations, which could lead to datainconsistencies in snapshots.Reproducer:../src/vstart.sh --new -x --localhost --bluestore./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.confdd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1mkdir /mnt/mycephfs/.snap/snap1md5sum /mnt/mycephfs/.snap/snap1/foofallocate -p -o 0 -l 4096 /mnt/mycephfs/fooecho 3 > /proc/sys/vm/drop/cachesmd5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!!
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: ufs: core: Flush exception handling work when RPM level is zeroEnsure that the exception event handling work is explicitly flushed duringsuspend when the runtime power management level is set to UFS_PM_LVL_0.When the RPM level is zero, the device power mode and link state bothremain active. Previously, the UFS core driver bypassed flushing exceptionevent handling jobs in this configuration. This created a race conditionwhere the driver could attempt to access the host controller to handle anexception after the system had already entered a deep power-down state,resulting in a system crash.Explicitly flush this work and disable auto BKOPs before the suspendcallback proceeds. This guarantees that pending exception tasks completeand prevents illegal hardware access during the power-down sequence.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:APEI/GHES: ensure that won't go past CPER allocated recordThe logic at ghes_new() prevents allocating too large records, bychecking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).Yet, the allocation is done with the actual number of pages from theCPER bios table location, which can be smaller.Yet, a bad firmware could send data with a different size, which mightbe bigger than the allocated memory, causing an OOPS: Unable to handle kernel paging request at virtual address fff00000f9b40000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000 [fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 Workqueue: kacpi_notify acpi_os_execute_deferred pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : hex_dump_to_buffer+0x30c/0x4a0 lr : hex_dump_to_buffer+0x328/0x4a0 sp : ffff800080e13880 x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083 x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004 x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083 x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010 x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020 x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008 x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020 x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000 x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008 Call trace: hex_dump_to_buffer+0x30c/0x4a0 (P) print_hex_dump+0xac/0x170 cper_estatus_print_section+0x90c/0x968 cper_estatus_print+0xf0/0x158 __ghes_print_estatus+0xa0/0x148 ghes_proc+0x1bc/0x220 ghes_notify_hed+0x5c/0xb8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x80 acpi_hed_notify+0x28/0x40 acpi_ev_notify_dispatch+0x50/0x80 acpi_os_execute_deferred+0x24/0x48 process_one_work+0x15c/0x3b0 worker_thread+0x2d0/0x400 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44) ---[ end trace 0000000000000000 ]---Prevent that by taking the actual allocated are into account whenchecking for CPER length.[ rjw: Subject tweaks ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm: clear cloned request bio pointer when last clone bio completesStale rq->bio values have been observed to cause double-initialization ofcloned bios in request-based device-mapper targets, leading touse-after-free and double-free scenarios.One such case occurs when using dm-multipath on top of a PCIe NVMenamespace, where cloned request bios are freed duringblk_complete_request(), but rq->bio is left intact. Subsequent cloneteardown then attempts to free the same bios again viablk_rq_unprep_clone().The resulting double-free path looks like: nvme_pci_complete_batch() nvme_complete_batch() blk_mq_end_request_batch() blk_complete_request() // called on a DM clone request bio_endio() // first free of all clone bios ... rq->end_io() // end_clone_request() dm_complete_request(tio->orig) dm_softirq_done() dm_done() dm_end_request() blk_rq_unprep_clone() // second free of clone biosFix this by clearing the clone request's bio pointer when the last clonedbio completes, ensuring that later teardown paths do not attempt to freealready-released bios.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Add sanity check for OOB writes at silencingAt silencing the playback URB packets in the implicit fb mode beforethe actual playback, we blindly assume that the received packets fitwith the buffer size. But when the setup in the capture streamdiffers from the playback stream (e.g. due to the USB core limitationof max packet size), such an inconsistency may lead to OOB writes tothe buffer, resulting in a crash.For addressing it, add a sanity check of the transfer buffer size atprepare_silent_urb(), and stop the data copy if the received dataoverflows. Also, report back the transfer error properly from there,too.Note that this doesn't fix the root cause of the playback erroritself, but this merely covers the kernel Oops.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()Although it is guided that `#mbox-cells` must be at least 1, there aremany instances of `#mbox-cells = <0>;` in the device tree. If that isthe case and the corresponding mailbox controller does not provide`fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` willbe used by default and out-of-bounds accesses could occur due to lack ofbounds check in that function.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: ec_bhf: Fix dma_free_coherent() dma handledma_free_coherent() in error path takes priv->rx_buf.alloc_len asthe dma handle. This would lead to improper unmapping of the buffer.Change the dma handle to priv->rx_buf.alloc_phys.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm: Account property blob allocations to memcgDRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sizedproperty blobs backed by kernel memory.Currently, the blob data allocation is not accounted to the allocatingprocess's memory cgroup, allowing unprivileged users to trigger unboundedkernel memory consumption and potentially cause system-wide OOM.Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memoryis properly charged to the caller's memcg. This ensures existing cgroupmemory limits apply and prevents uncontrolled kernel memory growth withoutintroducing additional policy or per-file limits.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: move ext4_percpu_param_init() before ext4_mb_init()When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the`DOUBLE_CHECK` macro defined, the following panic is triggered:==================================================================EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksumBUG: unable to handle page fault for address: ff110000fa2cc000PGD 3e01067 P4D 3e02067 PUD 0Oops: Oops: 0000 [#1] SMP NOPTICPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W 6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)RIP: 0010:percpu_counter_add_batch+0x13/0xa0Call Trace: ext4_mark_group_bitmap_corrupted+0xcb/0xe0 ext4_validate_block_bitmap+0x2a1/0x2f0 ext4_read_block_bitmap+0x33/0x50 mb_group_bb_bitmap_alloc+0x33/0x80 ext4_mb_add_groupinfo+0x190/0x250 ext4_mb_init_backend+0x87/0x290 ext4_mb_init+0x456/0x640 __ext4_fill_super+0x1072/0x1680 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4f6/0x6b0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e==================================================================This issue can be reproduced using the following commands: mkfs.ext4 -F -q -b 1024 /dev/sda 5G tune2fs -O quota,project /dev/sda mount /dev/sda /tmp/testWith DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() readsand validates the block bitmap. When the validation fails,ext4_mark_group_bitmap_corrupted() attempts to updatesbi->s_freeclusters_counter. However, this percpu_counter has not beeninitialized yet at this point, which leads to the panic described above.Fix this by moving the execution of ext4_percpu_param_init() to occurbefore ext4_mb_init(), ensuring the per-CPU counters are initializedbefore they are used.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:kexec: derive purgatory entry from symbolkexec_load_purgatory() derives image->start by locating e_entry inside anSHF_EXECINSTR section. If the purgatory object contains multipleexecutable sections with overlapping sh_addr, the entrypoint check canmatch more than once and trigger a WARN.Derive the entry section from the purgatory_start symbol when present andcompute image->start from its final placement. Keep the existing e_entryfallback for purgatories that do not expose the symbol.WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784Call Trace: bzImage64_load+0x133/0xa00 __do_sys_kexec_file_load+0x2b3/0x5c0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e[me@linux.beauty: move helper to avoid forward declaration, per Baoquan]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: nfc: nci: Fix parameter validation for packet dataSince commit 9c328f54741b ("net: nfc: nci: Add parameter validation forpacket data") communication with nci nfc chips is not working any more.The mentioned commit tries to fix access of uninitialized data, butfailed to understand that in some cases the data packet is of variablelength and can therefore not be compared to the maximum packet lengthgiven by the sizeof(struct).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panelsSince commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L")we may get the following kernel panic, for some panels, when rebooting: systemd-shutdown[1]: Rebooting. Call trace: ... do_serror+0x28/0x68 el1h_64_error_handler+0x34/0x50 el1h_64_error+0x6c/0x70 rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P) mipi_dsi_device_transfer+0x44/0x58 mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4 ili9881c_unprepare+0x38/0x88 drm_panel_unprepare+0xbc/0x108This happens for panels that need to send MIPI-DSI commands in theirunprepare() callback. Since the MIPI-DSI interface is stopped at thatpoint, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic.Fix by moving rzg2l_mipi_dsi_stop() to new callback functionrzg2l_mipi_dsi_atomic_post_disable().With this change we now have the correct power-down/stop sequence: systemd-shutdown[1]: Rebooting. rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry reboot: Restarting system
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rapidio: replace rio_free_net() with kfree() in rio_scan_alloc_net()When idtab allocation fails, net is not registered with rio_add_net() yet,so kfree(net) is sufficient to release the memory. Set mport->net to NULLto avoid dangling pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-af: Workaround SQM/PSE stalls by disabling stickyNIX SQ manager sticky mode is known to cause stalls when multiple SQsshare an SMQ and transmit concurrently. Additionally, PSE may deadlockon transitions between sticky and non-sticky transmissions. There isalso a credit drop issue observed when certain condition clocks aregated.work around these hardware errata by:- Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14)- Disabling sticky -> non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23)- Preventing credit drops by keeping the control-flow clock enabled: - Set TM9 (bit 21)These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With thisconfiguration the SQM/PSE maintain forward progress under load withoutcredit loss, at the cost of disabling sticky optimizations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Skip vcn poison irq release on VFVF doesn't enable VCN poison irq in VCNv2.5. Skip releasing it and avoidcall trace during deinitialization.[ 71.913601] [drm] clean up the vf2pf work item[ 71.915088] ------------[ cut here ]------------[ 71.915092] WARNING: CPU: 3 PID: 1079 at /tmp/amd.aFkFvSQl/amd/amdgpu/amdgpu_irq.c:641 amdgpu_irq_put+0xc6/0xe0 [amdgpu][ 71.915355] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_display_helper cec rc_core i2c_algo_bit video wmi binfmt_misc nls_iso8859_1 intel_rapl_msr intel_rapl_common input_leds joydev serio_raw mac_hid qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 hid_generic crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel usbhid 8139too sha256_ssse3 sha1_ssse3 hid psmouse bochs i2c_i801 ahci drm_vram_helper libahci i2c_smbus lpc_ich drm_ttm_helper 8139cp mii ttm aesni_intel crypto_simd cryptd[ 71.915484] CPU: 3 PID: 1079 Comm: rmmod Tainted: G OE 6.8.0-87-generic #88~22.04.1-Ubuntu[ 71.915489] Hardware name: Red Hat KVM/RHEL, BIOS 1.16.3-2.el9_5.1 04/01/2014[ 71.915492] RIP: 0010:amdgpu_irq_put+0xc6/0xe0 [amdgpu][ 71.915768] Code: 75 84 b8 ea ff ff ff eb d4 44 89 ea 48 89 de 4c 89 e7 e8 fd fc ff ff 5b 41 5c 41 5d 41 5e 5d 31 d2 31 f6 31 ff e9 55 30 3b c7 <0f> 0b eb d4 b8 fe ff ff ff eb a8 e9 b7 3b 8a 00 66 2e 0f 1f 84 00[ 71.915771] RSP: 0018:ffffcf0800eafa30 EFLAGS: 00010246[ 71.915775] RAX: 0000000000000000 RBX: ffff891bda4b0668 RCX: 0000000000000000[ 71.915777] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000[ 71.915779] RBP: ffffcf0800eafa50 R08: 0000000000000000 R09: 0000000000000000[ 71.915781] R10: 0000000000000000 R11: 0000000000000000 R12: ffff891bda480000[ 71.915782] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000[ 71.915792] FS: 000070cff87c4c40(0000) GS:ffff893abfb80000(0000) knlGS:0000000000000000[ 71.915795] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 71.915797] CR2: 00005fa13073e478 CR3: 000000010d634006 CR4: 0000000000770ef0[ 71.915800] PKRU: 55555554[ 71.915802] Call Trace:[ 71.915805] [ 71.915809] vcn_v2_5_hw_fini+0x19e/0x1e0 [amdgpu]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: do not ASSERT() when the fs flips RO inside btrfs_repair_io_failure()[BUG]There is a bug report that when btrfs hits ENOSPC error in a criticalpath, btrfs flips RO (this part is expected, although the ENOSPC bugstill needs to be addressed).The problem is after the RO flip, if there is a read repair pending, wecan hit the ASSERT() inside btrfs_repair_io_failure() like the following: BTRFS info (device vdc): relocating block group 30408704 flags metadata|raid1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -28) WARNING: fs/btrfs/extent-tree.c:3235 at __btrfs_free_extent.isra.0+0x453/0xfd0, CPU#1: btrfs/383844 Modules linked in: kvm_intel kvm irqbypass [...] ---[ end trace 0000000000000000 ]--- BTRFS info (device vdc state EA): 2 enospc errors during balance BTRFS info (device vdc state EA): balance: ended with status: -30 BTRFS error (device vdc state EA): parent transid verify failed on logical 30556160 mirror 2 wanted 8 found 6 BTRFS error (device vdc state EA): bdev /dev/nvme0n1 errs: wr 0, rd 0, flush 0, corrupt 10, gen 0 [...] assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938 ------------[ cut here ]------------ assertion failed: !(fs_info->sb->s_flags & SB_RDONLY) :: 0, in fs/btrfs/bio.c:938 kernel BUG at fs/btrfs/bio.c:938! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 868 Comm: kworker/u8:13 Tainted: G W N 6.19.0-rc6+ #4788 PREEMPT(full) Tainted: [W]=WARN, [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Workqueue: btrfs-endio simple_end_io_work RIP: 0010:btrfs_repair_io_failure.cold+0xb2/0x120 RSP: 0000:ffffc90001d2bcf0 EFLAGS: 00010246 RAX: 0000000000000051 RBX: 0000000000001000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8305cf42 RDI: 00000000ffffffff RBP: 0000000000000002 R08: 00000000fffeffff R09: ffffffff837fa988 R10: ffffffff8327a9e0 R11: 6f69747265737361 R12: ffff88813018d310 R13: ffff888168b8a000 R14: ffffc90001d2bd90 R15: ffff88810a169000 FS: 0000000000000000(0000) GS:ffff8885e752c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 ------------[ cut here ]------------[CAUSE]The cause of -ENOSPC error during the test case btrfs/124 is stillunknown, although it's known that we still have cases where metadata canbe over-committed but can not be fulfilled correctly, thus if we hitsuch ENOSPC error inside a critical path, we have no choice but abortthe current transaction.This will mark the fs read-only.The problem is inside the btrfs_repair_io_failure() path that we requirethe fs not to be mount read-only. This is normally fine, but if we aredoing a read-repair meanwhile the fs flips RO due to a critical error,we can enter btrfs_repair_io_failure() with super block set toread-only, thus triggering the above crash.[FIX]Just replace the ASSERT() with a proper return if the fs is alreadyread-only.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/panel: Fix a possible null-pointer dereference in jdi_panel_dsi_remove()In jdi_panel_dsi_remove(), jdi is explicitly checked, indicating that itmay be NULL: if (!jdi) mipi_dsi_detach(dsi);However, when jdi is NULL, the function does not return and continues bycalling jdi_panel_disable(): err = jdi_panel_disable(&jdi->base);Inside jdi_panel_disable(), jdi is dereferenced unconditionally, which canlead to a NULL-pointer dereference: struct jdi_panel *jdi = to_panel_jdi(panel); backlight_disable(jdi->backlight);To prevent such a potential NULL-pointer dereference, return early fromjdi_panel_dsi_remove() when jdi is NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/v3d: Set DMA segment size to avoid debug warningsWhen using V3D rendering with CONFIG_DMA_API_DEBUG enabled, thekernel occasionally reports a segment size mismatch. This is because'max_seg_size' is not set. The kernel defaults to 64K. setting'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()'from complaining about the over-mapping of the V3D segment length.DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536]WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : debug_dma_map_sg+0x330/0x388lr : debug_dma_map_sg+0x330/0x388sp : ffff8000829a3ac0x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffffx17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7cx8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280Call trace: debug_dma_map_sg+0x330/0x388 __dma_map_sg_attrs+0xc0/0x278 dma_map_sgtable+0x30/0x58 drm_gem_shmem_get_pages_sgt+0xb4/0x140 v3d_bo_create_finish+0x28/0x130 [v3d] v3d_create_bo_ioctl+0x54/0x180 [v3d] drm_ioctl_kernel+0xc8/0x140 drm_ioctl+0x2d4/0x4d8
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/page_alloc: clear page->private in free_pages_prepare()Several subsystems (slub, shmem, ttm, etc.) use page->private but don'tclear it before freeing pages. When these pages are later allocated ashigh-order pages and split via split_page(), tail pages retain stalepage->private values.This causes a use-after-free in the swap subsystem. The swap code usespage->private to track swap count continuations, assuming freshlyallocated pages have page->private == 0. When stale values are present,swap_count_continued() incorrectly assumes the continuation list is validand iterates over uninitialized page->lru containing LIST_POISON values,causing a crash: KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107] RIP: 0010:__do_sys_swapoff+0x1151/0x1860Fix this by clearing page->private in free_pages_prepare(), ensuring allfreed pages have clean state regardless of previous use.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: define and enforce CEPH_MAX_KEY_LENWhen decoding the key, verify that the key material would fit intoa fixed-size buffer in process_auth_done() and generally has a sanelength.The new CEPH_MAX_KEY_LEN check replaces the existing check for a keywith no key material which is a) not universal since CEPH_CRYPTO_NONEhas to be excluded and b) doesn't provide much value since a smallerthan needed key is just as invalid as no key -- this has to be handledelsewhere anyway.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()There is no need to BUG(), we can just return an error and log an errormessage.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md raid: fix hang when stopping arrays with metadata through dm-raidWhen using device-mapper's dm-raid target, stopping a RAID array can causethe system to hang under specific conditions.This occurs when:- A dm-raid managed device tree is suspended from top to bottom (the top-level RAID device is suspended first, followed by its underlying metadata and data devices)- The top-level RAID device is then removedRemoving the top-level device triggers a hang in the following sequence:the dm-raid destructor calls md_stop(), which tries to flush thewrite-intent bitmap by writing to the metadata sub-devices. However, thesedevices are already suspended, making them unable to complete the write-intentoperations and causing an indefinite block.Fix:- Prevent bitmap flushing when md_stop() is called from dm-raiddestructor context and avoid a quiescing/unquescing cycle which could also cause I/O- Still allow write-intent bitmap flushing when called from dm-raidsuspend contextThis ensures that RAID array teardown can complete successfully even when theunderlying devices are in a suspended state.This second patch uses md_is_rdwr() to distinguish between suspend anddestructor paths as elaborated on above.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVCFor the i.MX8MQ platform, there is a hardware limitation: the g1 VPU andg2 VPU cannot decode simultaneously; otherwise, it will cause below buserror and produce corrupted pictures, even potentially lead to system hang.[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.Therefore, it is necessary to ensure that g1 and g2 operate alternately.This allows for successful multi-instance decoding of H.264 and HEVC.To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then thev4l2_m2m_dev can handle the scheduling.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:soc/tegra: pmc: Fix unsafe generic_handle_irq() callCurrently, when resuming from system suspend on Tegra platforms,the following warning is observed:WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666Call trace: handle_irq_desc+0x20/0x58 (P) tegra186_pmc_wake_syscore_resume+0xe4/0x15c syscore_resume+0x3c/0xb8 suspend_devices_and_enter+0x510/0x540 pm_suspend+0x16c/0x1d8The warning occurs because generic_handle_irq() is being called froma non-interrupt context which is considered as unsafe.Fix this warning by deferring generic_handle_irq() call to an IRQ workwhich gets executed in hard IRQ context where generic_handle_irq()can be called safely.When PREEMPT_RT kernels are used, regular IRQ work (initialized withinit_irq_work) is deferred to run in per-CPU kthreads in preemptiblecontext rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARDvariant so that with PREEMPT_RT kernels, the IRQ work is processed inhardirq context instead of being deferred to a thread which is requiredfor calling generic_handle_irq().On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()execute in IRQ context, so this change has no functional impact forstandard kernel configurations.[treding@nvidia.com: miscellaneous cleanups]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: i2c: ov5647: Initialize subdev before controlsIn ov5647_init_controls() we call v4l2_get_subdevdata, but it isinitialized by v4l2_i2c_subdev_init() in the probe, which currentlyhappens after init_controls(). This can result in a segfault if theerror condition is hit, and we try to access i2c_client, so fix theorder.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDEdevice and then reassigned an ISA device: dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...); dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...);If the first lookup succeeds but the second fails, dev becomes NULL. Thisleads to a potential null-pointer dereference when dev_dbg() is called: if (errata.piix4.bmisx) dev_dbg(&dev->dev, ...);To prevent this, use two temporary pointers and retrieve each deviceindependently, avoiding overwriting dev with a possible NULL value.[ rjw: Subject adjustment, added an empty code line ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm: remove fake timeout to avoid leak requestSince commit 15f73f5b3e59 ("blk-mq: move failure injection out ofblk_mq_complete_request"), drivers are responsible for callingblk_should_fake_timeout() at appropriate code paths and opportunities.However, the dm driver does not implement its own timeout handler andrelies on the timeout handling of its slave devices.If an io-timeout-fail error is injected to a dm device, the requestwill be leaked and never completed, causing tasks to hang indefinitely.Reproduce:1. prepare dm which has iscsi slave device2. inject io-timeout-fail to dm echo 1 >/sys/class/block/dm-0/io-timeout-fail echo 100 >/sys/kernel/debug/fail_io_timeout/probability echo 10 >/sys/kernel/debug/fail_io_timeout/times3. read/write dm4. iscsiadm -m node -uResult: hang task like below[ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds.[ 862.244133] Tainted: G E 6.19.0-rc1+ #51[ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.[ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000[ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi][ 862.245264] Call Trace:[ 862.245587] [ 862.245814] __schedule+0x810/0x15c0[ 862.246557] schedule+0x69/0x180[ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120[ 862.247688] elevator_change+0x16d/0x460[ 862.247893] elevator_set_none+0x87/0xf0[ 862.248798] blk_unregister_queue+0x12e/0x2a0[ 862.248995] __del_gendisk+0x231/0x7e0[ 862.250143] del_gendisk+0x12f/0x1d0[ 862.250339] sd_remove+0x85/0x130 [sd_mod][ 862.250650] device_release_driver_internal+0x36d/0x530[ 862.250849] bus_remove_device+0x1dd/0x3f0[ 862.251042] device_del+0x38a/0x930[ 862.252095] __scsi_remove_device+0x293/0x360[ 862.252291] scsi_remove_target+0x486/0x760[ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi][ 862.252886] process_one_work+0x633/0xe50[ 862.253101] worker_thread+0x6df/0xf10[ 862.253647] kthread+0x36d/0x720[ 862.254533] ret_from_fork+0x2a6/0x470[ 862.255852] ret_from_fork_asm+0x1a/0x30[ 862.256037] Remove the blk_should_fake_timeout() check from dm, as dm has nonative timeout handling and should not attempt to fake timeouts.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nSVM: Remove a user-triggerable WARN on nested_svm_load_cr3() succeedingDrop the WARN in svm_set_nested_state() on nested_svm_load_cr3() failingas it is trivially easy to trigger from userspace by modifying CPUID afterloading CR3. E.g. modifying the state restoration selftest like so: --- tools/testing/selftests/kvm/x86/state_test.c +++ tools/testing/selftests/kvm/x86/state_test.c @@ -280,7 +280,16 @@ int main(int argc, char *argv[]) /* Restore state in a new VM. */ vcpu = vm_recreate_with_one_vcpu(vm); - vcpu_load_state(vcpu, state); + + if (stage == 4) { + state->sregs.cr3 = BIT(44); + vcpu_load_state(vcpu, state); + + vcpu_set_cpuid_property(vcpu, X86_PROPERTY_MAX_PHY_ADDR, 36); + __vcpu_nested_state_set(vcpu, &state->nested); + } else { + vcpu_load_state(vcpu, state); + } /* * Restore XSAVE state in a dummy vCPU, first without doinggenerates: WARNING: CPU: 30 PID: 938 at arch/x86/kvm/svm/nested.c:1877 svm_set_nested_state+0x34a/0x360 [kvm_amd] Modules linked in: kvm_amd kvm irqbypass [last unloaded: kvm] CPU: 30 UID: 1000 PID: 938 Comm: state_test Tainted: G W 6.18.0-rc7-58e10b63777d-next-vm Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:svm_set_nested_state+0x34a/0x360 [kvm_amd] Call Trace: kvm_arch_vcpu_ioctl+0xf33/0x1700 [kvm] kvm_vcpu_ioctl+0x4e6/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x61/0xad0 entry_SYSCALL_64_after_hwframe+0x4b/0x53Simply delete the WARN instead of trying to prevent userspace from shoving"illegal" state into CR3. For better or worse, KVM's ABI allows userspaceto set CPUID after SREGS, and vice versa, and KVM is very permissive whenit comes to guest CPUID. I.e. attempting to enforce the virtual CPU modelwhen setting CPUID could break userspace. Given that the WARN doesn'tprovide any meaningful protection for KVM or benefit for userspace, simplydrop it even though the odds of breaking userspace are minuscule.Opportunistically delete a spurious newline.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:most: core: fix leak on early registration failureA recent commit fixed a resource leak on early registration failures butfor some reason left out the first error path which still leaks theresources associated with the interface.Fix up also the first error path so that the interface is alwaysreleased on errors.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notifyInvalidating a dmabuf will impact other users of the shared BO.In the scenario where process A moves the BO, it needs to informprocess B about the move and process B will need to update itspage table.The commit fixes a synchronisation bug caused by the use of theticket: it made amdgpu_vm_handle_moved behave as if updatingthe page table immediately was correct but in this case it's not.An example is the following scenario, with 2 GPUs and glxgearsrunning on GPU0 and Xorg running on GPU1, on a system where P2PPCI isn't supported:glxgears: export linear buffer from GPU0 and import using GPU1 submit frame rendering to GPU0 submit tiled->linear blitXorg: copy of linear bufferThe sequence of jobs would be: drm_sched_job_run # GPU0, frame rendering drm_sched_job_queue # GPU0, blit drm_sched_job_done # GPU0, frame rendering drm_sched_job_run # GPU0, blit move linear buffer for GPU1 access # amdgpu_dma_buf_move_notify -> update pt # GPU0It this point the blit job on GPU0 is still running and wouldlikely produce a page fault.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: spidev: fix lock inversion between spi_lock and buf_lockThe spidev driver previously used two mutexes, spi_lock and buf_lock,but acquired them in different orders depending on the code path: write()/read(): buf_lock -> spi_lock ioctl(): spi_lock -> buf_lockThis AB-BA locking pattern triggers lockdep warnings and cancause real deadlocks: WARNING: possible circular locking dependency detected spidev_ioctl() -> mutex_lock(&spidev->buf_lock) spidev_sync_write() -> mutex_lock(&spidev->spi_lock) *** DEADLOCK ***The issue is reproducible with a simple userspace program thatperforms write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls fromseparate threads on the same spidev file descriptor.Fix this by simplifying the locking model and removing the lockinversion entirely. spidev_sync() no longer performs any locking,and all callers serialize access using spi_lock.buf_lock is removed since its functionality is fully covered byspi_lock, eliminating the possibility of lock ordering issues.This removes the lock inversion and prevents deadlocks withoutchanging userspace ABI or behaviour.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Fix dsc eDP issue[why]Need to add function hook check before use
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: dummy-hcd: Fix interrupt synchronization errorThis fixes an error in synchronization in the dummy-hcd driver. Theerror has a somewhat involved history. The synchronization mechanismwas introduced by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneoussynchronization change"), which added an emulated "interrupts enabled"flag together with code emulating synchronize_irq() (it waits untilall current handler callbacks have returned).But the emulated interrupt-disable occurred too late, after the drivercontaining the handler callback routines had been told that it wasunbound and no more callbacks would occur. Commit 4a5d797a9f9c ("usb:gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this bymoving the synchronize_irq() emulation code from dummy_stop() todummy_pullup(), which runs before the unbind callback.There still were races, though, because the emulated interrupt-disablestill occurred too late. It couldn't be moved to dummy_pullup(),because that routine can be called for reasons other than an impendingunbind. Therefore commits 7dc0c55e9f30 ("USB: UDC core: Addudc_async_callbacks gadget op") and 04145a03db9d ("USB: UDC: Implementudc_async_callbacks in dummy-hcd") added an API allowing the UDC coreto tell dummy-hcd exactly when emulated interrupts and their callbacksshould be disabled.That brings us to the current state of things, which is still wrongbecause the emulated synchronize_irq() occurs before the emulatedinterrupt-disable! That's no good, beause it means that more emulatedinterrupts can occur after the synchronize_irq() emulation has run,leading to the possibility that a callback handler may be running whenthe gadget driver is unbound.To fix this, we have to move the synchronize_irq() emulation code yetagain, to the dummy_udc_async_callbacks() routine, which takes care ofenabling and disabling emulated interrupt requests. Thesynchronization will now run immediately after emulated interrupts aredisabled, which is where it belongs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: dummy-hcd: Fix locking/synchronization errorSyzbot testing was able to provoke an addressing exception and crashin the usb_gadget_udc_reset() routine indrivers/usb/gadgets/udc/core.c, resulting from the fact that theroutine was called with a second ("driver") argument of NULL. The badcaller was set_link_state() in dummy_hcd.c, and the problem arosebecause of a race between a USB reset and driver unbind.These sorts of races were not supposed to be possible; commit7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),along with a few followup commits, was written specifically to preventthem. As it turns out, there are (at least) two errors remaining inthe code. Another patch will address the second error; this one isconcerned with the first.The error responsible for the syzbot crash occurred because thestop_activity() routine will sometimes drop and then re-acquire thedum->lock spinlock. A call to stop_activity() occurs inset_link_state() when handling an emulated USB reset, after the testof dum->ints_enabled and before the increment of dum->callback_usage.This allowed another thread (doing a driver unbind) to sneak in andgrab the spinlock, and then clear dum->ints_enabled and dum->driver.Normally this other thread would have to wait for dum->callback_usageto go down to 0 before it would clear dum->driver, but in this case itdidn't have to wait since dum->callback_usage had not yet beenincremented.The fix is to increment dum->callback_usage _before_ callingstop_activity() instead of after. Then the thread doing the unbindwill not clear dum->driver until after the call tousb_gadget_udc_reset() safely returns and dum->callback_usage has beendecremented again.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error pathWhen kobject_init_and_add() fails, cpufreq_dbs_governor_init() callskobject_put(&dbs_data->attr_set.kobj).The kobject release callback cpufreq_dbs_data_release() callsgov->exit(dbs_data) and kfree(dbs_data), but the current error paththen calls gov->exit(dbs_data) and kfree(dbs_data) again, causing adouble free.Keep the direct kfree(dbs_data) for the gov->init() failure path, butafter kobject_init_and_add() has been called, let kobject_put() handlethe cleanup through cpufreq_dbs_data_release().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: prevent possible UaF in addrconf_permanent_addr()The mentioned helper try to warn the user about an exceptionalcondition, but the message is delivered too late, accessing the ipv6after its possible deletion.Reorder the statement to avoid the possible UaF; while at it, place thewarning outside the idev->lock as it needs no protection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/ipv6: ioam6: prevent schema length wraparound in trace fillioam6_fill_trace_data() stores the schema contribution to the tracelength in a u8. With bit 22 enabled and the largest schema payload,sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses theremaining-space check. __ioam6_fill_trace_data() then positions thewrite cursor without reserving the schema area but still copies the4-byte schema header and the full schema payload, overrunning the tracebuffer.Keep sclen in an unsigned int so the remaining-space check and the writecursor calculation both see the full schema length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_rndis: Protect RNDIS options with mutexThe class/subclass/protocol options are suspectible to race conditionsas they can be accessed concurrently through configfs.Use existing mutex to protect these options. This issue was identifiedduring code inspection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_subset: Fix unbalanced refcnt in geth_freegeth_alloc() increments the reference count, but geth_free() fails todecrement it. This prevents the configuration of attributes via configfsafter unlinking the function.Decrement the reference count in geth_free() to ensure proper cleanup.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipa: fix event ring index not programmed for IPA v5.0+For IPA v5.0+, the event ring index field moved from CH_C_CNTXT_0 toCH_C_CNTXT_1. The v5.0 register definition intended to define thisfield in the CH_C_CNTXT_1 fmask array but used the old identifier ofERINDEX instead of CH_ERINDEX.Without a valid event ring, GSI channels could never signal transfercompletions. This caused gsi_channel_trans_quiesce() to blockforever in wait_for_completion().At least for IPA v5.2 this resolves an issue seen where runtimesuspend, system suspend, and remoteproc stop all hanged forever. Italso meant the IPA data path was completely non functional.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeueThe logic used to abort the DMA ring contains several flaws: 1. The driver unconditionally issues a ring abort even when the ring has already stopped. 2. The completion used to wait for abort completion is never re-initialized, resulting in incorrect wait behavior. 3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which resets hardware ring pointers and disrupts the controller state. 4. If the ring is already stopped, the abort operation should be considered successful without attempting further action.Fix the abort handling by checking whether the ring is running beforeissuing an abort, re-initializing the completion when needed, ensuring thatRING_CTRL_ENABLE remains asserted during abort, and treating an alreadystopped ring as a successful condition.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: light: bh1780: fix PM runtime leak on error pathMove pm_runtime_put_autosuspend() before the error check to ensurethe PM runtime reference count is always decremented afterpm_runtime_get_sync(), regardless of whether the read operationsucceeds or fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix transaction abort on file creation due to name hash collisionIf we attempt to create several files with names that result in the samehash, we have to pack them in same dir item and that has a limit inherentto the leaf size. However if we reach that limit, we trigger a transactionabort and turns the filesystem into RO mode. This allows for a malicioususer to disrupt a system, without the need to have administrationprivileges/capabilities.Reproducer: $ cat exploit-hash-collisions.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster and require fewer file # names that result in hash collision. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # List of names that result in the same crc32c hash for btrfs. declare -a names=( 'foobar' '%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC' 'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z' 'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4' 'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:' 'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO' 'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us' 'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY' 'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO' 'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU' 'Ono7avN5GjC:_6dBJ_' 'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am' 'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k' 'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2' 'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd' 'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm' 'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ' 'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky' 'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS' 'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz' 'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu' 'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN' 'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4=' 'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn' 'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C' 'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW' '8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc' 'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/apic: Disable x2apic on resume if the kernel expects soWhen resuming from s2ram, firmware may re-enable x2apic mode, which may havebeen disabled by the kernel during boot either because it doesn't support IRQremapping or for other reasons. This causes the kernel to continue using thexapic interface, while the hardware is in x2apic mode, which causes hangs.This happens on defconfig + bare metal + s2ram.Fix this in lapic_resume() by disabling x2apic if the kernel expects it to bedisabled, i.e. when x2apic_mode = 0.The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either thepre-sleep configuration or initial boot configuration for each CPU, includingMSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things)So at least as per the spec, re-enablement of x2apic by the firmware isallowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix use-after-free race in VM acquireReplace non-atomic vm->process_info assignment with cmpxchg()to prevent race when parent/child processes sharing a drm_fileboth try to acquire the same VM after fork().(cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ncsi: fix skb leak in error pathsEarly return paths in NCSI RX and AEN handlers fail to releasethe received skb, resulting in a memory leak.Specifically, ncsi_aen_handler() returns on invalid AEN packetswithout consuming the skb. Similarly, ncsi_rcv_rsp() exits earlywhen failing to resolve the NCSI device, response handler, orrequest, leaving the skb unfreed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs readThe q54sj108a2_debugfs_read function suffers from a stack buffer overflowdue to incorrect arguments passed to bin2hex(). The function currentlypasses 'data' as the destination and 'data_char' as the source.Because bin2hex() converts each input byte into two hex characters, a32-byte block read results in 64 bytes of output. Since 'data' is only34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the endof the buffer onto the stack.Additionally, the arguments were swapped: it was reading from thezero-initialized 'data_char' and writing to 'data', resulting inall-zero output regardless of the actual I2C read.Fix this by:1. Expanding 'data_char' to 66 bytes to safely hold the hex output.2. Correcting the bin2hex() argument order and using the actual read count.3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nouveau/dpcd: return EBUSY for aux xfer if the device is asleepIf we have runtime suspended, and userspace wants to use /dev/drm_dp_*then just tell it the device is busy instead of crashing in the GSPcode.WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy)Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]This is a simple fix to get backported. We should probably engineer aproper power domain solution to wake up devices and keep them awakewhile fw updates are happening.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: Avoid double-rtnl_lock ELP metric workerbatadv_v_elp_get_throughput() might be called when the RTNL lock is alreadyheld. This could be problematic when the work queue item is cancelled viacancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,an rtnl_lock() would cause a deadlock.To avoid this, rtnl_trylock() was used in this function to skip theretrieval of the ethtool information in case the RTNL lock was alreadyheld.But for cfg80211 interfaces, batadv_get_real_netdev() was called - whichalso uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() mustalso be used instead and the lockless version __batadv_get_real_netdev()has to be called.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/tcp-md5: Fix MAC comparison to be constant-timeTo prevent timing attacks, MACs need to be compared in constanttime. Use the appropriate helper function for this.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ieThe current code checks 'i + 5 < in_len' at the end of the if statement.However, it accesses 'in_ie[i + 5]' before that check, which can leadto an out-of-bounds read. Move the length check to the beginning of theconditional to ensure the index is within bounds before accessing thearray.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-boundsread in rtw_get_ie() parser"), we don't trust the data in the frame sowe should check the length better before acting on it
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Use u32 for non-negative values in ceph_monmap_decode()This patch fixes unnecessary implicit conversions that change signednessof blob_len and num_mon in ceph_monmap_decode().Currently blob_len and num_mon are (signed) int variables. They are usedto hold values that are always non-negative and get assigned inceph_decode_32_safe(), which is meant to assign u32 values. Bothvariables are subsequently used as unsigned values, and the value ofnum_mon is further assigned to monmap->num_mon, which is of type u32.Therefore, both variables should be of type u32. This is especiallyrelevant for num_mon. If the value read from the incoming message isvery large, it is interpreted as a negative value, and the check fornum_mon > CEPH_MAX_MON does not catch it. This leads to the attempt toallocate a very large chunk of memory for monmap, which will most likelyfail. In this case, an unnecessary attempt to allocate memory isperformed, and -ENOMEM is returned instead of -EINVAL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: prevent potential out-of-bounds reads in process_message_header()If the message frame is (maliciously) corrupted in a way that thelength of the control segment ends up being less than the size of themessage header or a different frame is made to look like a messageframe, out-of-bounds reads may ensue in process_message_header().Perform an explicit bounds check before decoding the message header.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()This patch fixes an out-of-bounds access in ceph_handle_auth_reply()that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. Inceph_handle_auth_reply(), the value of the payload_len field of such amessage is stored in a variable of type int. A value greater thanINT_MAX leads to an integer overflow and is interpreted as a negativevalue. This leads to decrementing the pointer address by this value andsubsequently accessing it because ceph_decode_need() only checks thatthe memory access does not exceed the end address of the allocation.This patch fixes the issue by changing the data type of payload_len tou32. Additionally, the data type of result_msg_len is changed to u32,as it is also a variable holding a non-negative length.Also, an additional layer of sanity checks is introduced, ensuring thatdirectly after reading it from the message, payload_len andresult_msg_len are not greater than the overall segment length.BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph]Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014Workqueue: ceph-msgr ceph_con_workfn [libceph]Call Trace: dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:kprobes: avoid crash when rmmod/insmod after ftrace killedAfter we hit ftrace is killed by some errors, the kernel crash ifwe remove modules in which kprobe probes.BUG: unable to handle page fault for address: fffffbfff805000dPGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0Oops: Oops: 0000 [#1] SMP KASAN PTICPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OETainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULERIP: 0010:kprobes_module_callback+0x89/0x790RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX: ffffffff86a8de90RDX: ffffed1025c2af9b RSI: 0000000000000008 RDI: ffffffffc0280068RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed1025c2af9aR10: ffff88812e157cd7 R11: 205d323130325420 R12: 0000000000000002R13: ffffffffc0290488 R14: 0000000000000002 R15: ffffffffc0280040FS: 00007fbc450dd740(0000) GS:ffff888420331000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: fffffbfff805000d CR3: 000000010f624000 CR4: 00000000000006f0Call Trace: notifier_call_chain+0xc6/0x280 blocking_notifier_call_chain+0x60/0x90 __do_sys_delete_module.constprop.0+0x32a/0x4e0 do_syscall_64+0x5d/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThis is because the kprobe on ftrace does not correctly handlesthe kprobe_ftrace_disabled flag set by ftrace_kill().To prevent this error, check kprobe_ftrace_disabled in__disarm_kprobe_ftrace() and skip all ftrace related operations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and startDuring ADSP stop and start, the kernel crashes due to the order in whichASoC components are removed.On ADSP stop, the q6apm-audio .remove callback unloads topology and removesPCM runtimes during ASoC teardown. This deletes the RTDs that contain theq6apm DAI components before their removal pass runs, leaving thosecomponents still linked to the card and causing crashes on the next rebind.Fix this by ensuring that all dependent (child) components are removedfirst, and the q6apm component is removed last.[ 48.105720] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0[ 48.114763] Mem abort info:[ 48.117650] ESR = 0x0000000096000004[ 48.121526] EC = 0x25: DABT (current EL), IL = 32 bits[ 48.127010] SET = 0, FnV = 0[ 48.130172] EA = 0, S1PTW = 0[ 48.133415] FSC = 0x04: level 0 translation fault[ 48.138446] Data abort info:[ 48.141422] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000[ 48.147079] CM = 0, WnR = 0, TnD = 0, TagAccess = 0[ 48.152354] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[ 48.157859] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001173cf000[ 48.164517] [00000000000000d0] pgd=0000000000000000, p4d=0000000000000000[ 48.171530] Internal error: Oops: 0000000096000004 [#1] SMP[ 48.177348] Modules linked in: q6prm_clocks q6apm_lpass_dais q6apm_dai snd_q6dsp_common q6prm snd_q6apm 8021q garp mrp stp llc snd_soc_hdmi_codec apr pdr_interface phy_qcom_edp fastrpc qcom_pd_mapper rpmsg_ctrl qrtr_smd rpmsg_char qcom_pdr_msg qcom_iris v4l2_mem2mem videobuf2_dma_contig ath11k_pci msm ubwc_config at24 ath11k videobuf2_memops mac80211 ocmem videobuf2_v4l2 libarc4 drm_gpuvm mhi qrtr videodev drm_exec snd_soc_sc8280xp gpu_sched videobuf2_common nvmem_qcom_spmi_sdam snd_soc_qcom_sdw drm_dp_aux_bus qcom_q6v5_pas qcom_spmi_temp_alarm snd_soc_qcom_common rtc_pm8xxx qcom_pon drm_display_helper cec qcom_pil_info qcom_stats soundwire_bus drm_client_lib mc dispcc0_sa8775p videocc_sa8775p qcom_q6v5 camcc_sa8775p snd_soc_dmic phy_qcom_sgmii_eth snd_soc_max98357a i2c_qcom_geni snd_soc_core dwmac_qcom_ethqos llcc_qcom icc_bwmon qcom_sysmon snd_compress qcom_refgen_regulator coresight_stm stmmac_platform snd_pcm_dmaengine qcom_common coresight_tmc stmmac coresight_replicator qcom_glink_smem coresight_cti stm_core[ 48.177444] coresight_funnel snd_pcm ufs_qcom phy_qcom_qmp_usb gpi phy_qcom_snps_femto_v2 coresight phy_qcom_qmp_ufs qcom_wdt gpucc_sa8775p pcs_xpcs mdt_loader qcom_ice icc_osm_l3 qmi_helpers snd_timer snd soundcore display_connector qcom_rng nvmem_reboot_mode drm_kms_helper phy_qcom_qmp_pcie sha256 cfg80211 rfkill socinfo fuse drm backlight ipv6[ 48.301059] CPU: 2 UID: 0 PID: 293 Comm: kworker/u32:2 Not tainted 6.19.0-rc6-dirty #10 PREEMPT[ 48.310081] Hardware name: Qualcomm Technologies, Inc. Lemans EVK (DT)[ 48.316782] Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface][ 48.323672] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 48.330825] pc : mutex_lock+0xc/0x54[ 48.334514] lr : soc_dapm_shutdown_dapm+0x44/0x174 [snd_soc_core][ 48.340794] sp : ffff800084ddb7b0[ 48.344207] x29: ffff800084ddb7b0 x28: ffff00009cd9cf30 x27: ffff00009cd9cc00[ 48.351544] x26: ffff000099610190 x25: ffffa31d2f19c810 x24: ffffa31d2f185098[ 48.358869] x23: ffff800084ddb7f8 x22: 0000000000000000 x21: 00000000000000d0[ 48.366198] x20: ffff00009ba6c338 x19: ffff00009ba6c338 x18: 00000000ffffffff[ 48.373528] x17: 000000040044ffff x16: ffffa31d4ae6dca8 x15: 072007740775076f[ 48.380853] x14: 0765076d07690774 x13: 00313a323a656369 x12: 767265733a637673[ 48.388182] x11: 00000000000003f9 x10: ffffa31d4c7dea98 x9 : 0000000000000001[ 48.395519] x8 : ffff00009a2aadc0 x7 : 0000000000000003 x6 : 0000000000000000[ 48.402854] x5 : 0000000000000---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: hisi_sas: Fix NULL pointer exception during user_scan()user_scan() invokes updated sas_user_scan() for channel 0, and ifsuccessful, iteratively scans remaining channels (1 to shost->max_channel)via scsi_scan_host_selected() in commit 37c4e72b0651 ("scsi: Fixsas_user_scan() to handle wildcard and multi-channel scans"). However,hisi_sas supports only one channel, and the current value of max_channel is1. sas_user_scan() for channel 1 will trigger the following NULL pointerexception:[ 441.554662] Unable to handle kernel NULL pointer dereference at virtual address 00000000000008b0[ 441.554699] Mem abort info:[ 441.554710] ESR = 0x0000000096000004[ 441.554718] EC = 0x25: DABT (current EL), IL = 32 bits[ 441.554723] SET = 0, FnV = 0[ 441.554726] EA = 0, S1PTW = 0[ 441.554730] FSC = 0x04: level 0 translation fault[ 441.554735] Data abort info:[ 441.554737] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000[ 441.554742] CM = 0, WnR = 0, TnD = 0, TagAccess = 0[ 441.554747] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[ 441.554752] user pgtable: 4k pages, 48-bit VAs, pgdp=00000828377a6000[ 441.554757] [00000000000008b0] pgd=0000000000000000, p4d=0000000000000000[ 441.554769] Internal error: Oops: 0000000096000004 [#1] SMP[ 441.629589] Modules linked in: arm_spe_pmu arm_smmuv3_pmu tpm_tis_spi hisi_uncore_sllc_pmu hisi_uncore_pa_pmu hisi_uncore_l3c_pmu hisi_uncore_hha_pmu hisi_uncore_ddrc_pmu hisi_uncore_cpa_pmu hns3_pmu hisi_ptt hisi_pcie_pmu tpm_tis_core spidev spi_hisi_sfc_v3xx hisi_uncore_pmu spi_dw_mmio fuse hclge hclge_common hisi_sec2 hisi_hpre hisi_zip hisi_qm hns3 hisi_sas_v3_hw sm3_ce sbsa_gwdt hnae3 hisi_sas_main uacce hisi_dma i2c_hisi dm_mirror dm_region_hash dm_log dm_mod[ 441.670819] CPU: 46 UID: 0 PID: 6994 Comm: bash Kdump: loaded Not tainted 7.0.0-rc2+ #84 PREEMPT[ 441.691327] pstate: 81400009 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)[ 441.698277] pc : sas_find_dev_by_rphy+0x44/0x118[ 441.702896] lr : sas_find_dev_by_rphy+0x3c/0x118[ 441.707502] sp : ffff80009abbba40[ 441.710805] x29: ffff80009abbba40 x28: ffff082819a40008 x27: ffff082810c37c08[ 441.717930] x26: ffff082810c37c28 x25: ffff082819a40290 x24: ffff082810c37c00[ 441.725054] x23: 0000000000000000 x22: 0000000000000001 x21: ffff082819a40000[ 441.732179] x20: ffff082819a40290 x19: 0000000000000000 x18: 0000000000000020[ 441.739304] x17: 0000000000000000 x16: ffffb5dad6bda690 x15: 00000000ffffffff[ 441.746428] x14: ffff082814c3b26c x13: 00000000ffffffff x12: ffff082814c3b26a[ 441.753553] x11: 00000000000000c0 x10: 000000000000003a x9 : ffffb5dad5ea94f4[ 441.760678] x8 : 000000000000003a x7 : ffff80009abbbab0 x6 : 0000000000000030[ 441.767802] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000[ 441.774926] x2 : ffff08280f35a300 x1 : ffffb5dad7127180 x0 : 0000000000000000[ 441.782053] Call trace:[ 441.784488] sas_find_dev_by_rphy+0x44/0x118 (P)[ 441.789095] sas_target_alloc+0x24/0xb0[ 441.792920] scsi_alloc_target+0x290/0x330[ 441.797010] __scsi_scan_target+0x88/0x258[ 441.801096] scsi_scan_channel+0x74/0xb8[ 441.805008] scsi_scan_host_selected+0x170/0x188[ 441.809615] sas_user_scan+0xfc/0x148[ 441.813267] store_scan+0x10c/0x180[ 441.816743] dev_attr_store+0x20/0x40[ 441.820398] sysfs_kf_write+0x84/0xa8[ 441.824054] kernfs_fop_write_iter+0x130/0x1c8[ 441.828487] vfs_write+0x2c0/0x370[ 441.831880] ksys_write+0x74/0x118[ 441.835271] __arm64_sys_write+0x24/0x38[ 441.839182] invoke_syscall+0x50/0x120[ 441.842919] el0_svc_common.constprop.0+0xc8/0xf0[ 441.847611] do_el0_svc+0x24/0x38[ 441.850913] el0_svc+0x38/0x158[ 441.854043] el0t_64_sync_handler+0xa0/0xe8[ 441.858214] el0t_64_sync+0x1ac/0x1b0[ 441.861865] Code: aa1303e0 97ff70a8 34ffff80 d10a4273 (f9445a75)[ 441.867946] ---[ end trace 0000000000000000 ]---Therefore---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Completely fix fcport double freeIn qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free().When an error happens, this function is called by qla2x00_sp_release(),when kref_put() releases the first and the last reference.qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport().Doing it one more time after kref_put() is a bad idea.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:powerpc, perf: Check that current->mm is alive before getting user callchainIt may happen that mm is already released, which leads to kernel panic.This adds the NULL check for current->mm, similarly tocommit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain").I was getting this panic when running a profiling BPF program(profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952] Faulting instruction address: 0xc00000000020fac0 [26215.051957] Oops: Kernel access of bad area, sig: 11 [#1] [...] [26215.052049] Call Trace: [26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable) [26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30 [26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360 [26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0 [26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274 [...]In addition, move storing the top-level stack entry to genericperf_callchain_user to make sure the top-evel entry is always captured,even if current->mm is NULL.[Maddy: fixed message to avoid checkpatch format style error]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix i_nlink underrun during async unlinkDuring async unlink, we drop the `i_nlink` counter before we receivethe completion (that will eventually update the `i_nlink`) because "weassume that the unlink will succeed". That is not a bad idea, but itraces against deletions by other clients (or against the completion ofour own unlink) and can lead to an underrun which emits a WARNING likethis one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655 Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drop_nlink+0x50/0x68 lr : ceph_unlink+0x6c4/0x720 sp : ffff80012173bc90 x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680 x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647 x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203 x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365 x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74 x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94 x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002 x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8 Call trace: drop_nlink+0x50/0x68 (P) vfs_unlink+0xb0/0x2e8 do_unlinkat+0x204/0x288 __arm64_sys_unlinkat+0x3c/0x80 invoke_syscall.constprop.0+0x54/0xe8 do_el0_svc+0xa4/0xc8 el0_svc+0x18/0x58 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x154/0x158In ceph_unlink(), a call to ceph_mdsc_submit_request() submits theCEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.Meanwhile, between this call and the following drop_nlink() call, aworker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT orjust a CEPH_MSG_CLIENT_REPLY (the latter of which could be our owncompletion). These will lead to a set_nlink() call, updating the`i_nlink` counter to the value received from the MDS. If that new`i_nlink` value happens to be zero, it is illegal to decrement itfurther. But that is exactly what ceph_unlink() will do then.The WARNING can be reproduced this way:1. Force async unlink; only the async code path is affected. Having no real clue about Ceph internals, I was unable to find out why the MDS wouldn't give me the "Fxr" capabilities, so I patched get_caps_for_async_unlink() to always succeed. (Note that the WARNING dump above was found on an unpatched kernel, without this kludge - this is not a theoretical bug.)2. Add a sleep call after ceph_mdsc_submit_request() so the unlink completion gets handled by a worker thread before drop_nlink() is called. This guarantees that the `i_nlink` is already zero before drop_nlink() runs.The solution is to skip the counter decrement when it is already zero,but doing so without a lock is still racy (TOCTOU). Sinceceph_fill_inode() and handle_cap_grant() both hold the`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, thisseems like the proper lock to protect the `i_nlink` updates.I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using`afs_vnode.cb_lock`). All three have the zero check as well.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: image: mdc800: kill download URB on timeoutmdc800_device_read() submits download_urb and waits for completion.If the timeout fires and the device has not responded, the functionreturns without killing the URB, leaving it active.A subsequent read() resubmits the same URB while it is stillin-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active"Check the return value of wait_event_timeout() and kill the URB ifit indicates timeout, ensuring the URB is complete before its statusis inspected or the URB is resubmitted.Similar to- commit 372c93131998 ("USB: yurex: fix control-URB timeout handling")- commit b98d5000c505 ("media: rc: iguanair: handle timeouts")
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: renesas_usbhs: fix use-after-free in ISR during device removalIn usbhs_remove(), the driver frees resources (including the pipe array)while the interrupt handler (usbhs_interrupt) is still registered. If aninterrupt fires after usbhs_pipe_remove() but before the driver is fullyunbound, the ISR may access freed memory, causing a use-after-free.Fix this by calling devm_free_irq() before freeing resources. This ensuresthe interrupt handler is both disabled and synchronized (waits for anyrunning ISR to complete) before usbhs_pipe_remove() is called.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: class: cdc-wdm: fix reordering issue in read code pathQuoting the bug report:Due to compiler optimization or CPU out-of-order execution, thedesc->length update can be reordered before the memmove. If thishappens, wdm_read() can see the new length and call copy_to_user() onuninitialized memory. This also violates LKMM data race rules [1].Fix it by using WRITE_ONCE and memory barriers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeoutsThe usbtmc driver accepts timeout values specified by the user in anioctl command, and uses these timeouts for some usb_bulk_msg() calls.Since the user can specify arbitrarily long timeouts andusb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable()instead to avoid the possibility of the user hanging a kernel threadindefinitely.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: xhci: Fix memory leak in xhci_disable_slot()xhci_alloc_command() allocates a command structure and, when thesecond argument is true, also allocates a completion structure.Currently, the error handling path in xhci_disable_slot() only freesthe command structure using kfree(), causing the completion structureto leak.Use xhci_free_command() instead of kfree(). xhci_free_command() correctlyfrees both the command structure and the associated completion structure.Since the command structure is allocated with zero-initialization,command->in_ctx is NULL and will not be erroneously freed byxhci_free_command().This bug was found using an experimental static analysis tool we aredeveloping. The tool is based on the LLVM framework and is specificallydesigned to detect memory management issues. It is currently underactive development and not yet publicly available, but we plan toopen-source it after our research is published.The bug was originally detected on v6.13-rc1 using our static analysistool, and we have verified that the issue persists in the latest mainlinekernel.We performed build testing on x86_64 with allyesconfig using GCC=11.4.0.Since triggering these error paths in xhci_disable_slot() requires specifichardware conditions or abnormal state, we were unable to construct a testcase to reliably trigger these specific error paths at runtime.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfacesThe Scarlett2 mixer quirk in USB-audio driver may hit a NULLdereference when a malformed USB descriptor is passed, since itassumes the presence of an endpoint in the parsed interface inscarlett2_find_fc_interface(), as reported by fuzzer.For avoiding the NULL dereference, just add the sanity check ofbNumEndpoints and skip the invalid interface.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cgroup: fix race between task migration and iterationWhen a task is migrated out of a css_set, cgroup_migrate_add_task()first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks);If a css_task_iter currently has it->task_pos pointing to this task,css_set_move_task() calls css_task_iter_skip() to keep the iteratorvalid. However, since the task has already been moved to ->mg_tasks,the iterator is advanced relative to the mg_tasks list instead of theoriginal tasks list. As a result, remaining tasks on cset->tasks, aswell as tasks queued on cset->mg_tasks, can be skipped by iteration.Fix this by calling css_set_skip_task_iters() before unlinkingtask->cg_list from cset->tasks. This advances all active iterators tothe next task on cset->tasks, so iteration continues correctly evenwhen a task is concurrently being migrated.This race is hard to hit in practice without instrumentation, but itcan be reproduced by artificially slowing down cgroup_procs_show().For example, on an Android device a temporary/sys/kernel/cgroup/cgroup_test knob can be added to inject a delayinto cgroup_procs_show(), and then: 1) Spawn three long-running tasks (PIDs 101, 102, 103). 2) Create a test cgroup and move the tasks into it. 3) Enable a large delay via /sys/kernel/cgroup/cgroup_test. 4) In one shell, read cgroup.procs from the test cgroup. 5) Within the delay window, in another shell migrate PID 102 by writing it to a different cgroup.procs file.Under this setup, cgroup.procs can intermittently show only PID 101while skipping PID 103. Once the migration completes, reading thefile again shows all tasks as expected.Note that this change does not allow removing the existingcss_set_skip_task_iters() call in css_set_move_task(). The new callin cgroup_migrate_add_task() only handles iterators that are racingwith migration while the task is still on cset->tasks. Iterators mayalso start after the task has been moved to cset->mg_tasks. If wedropped css_set_skip_task_iters() from css_set_move_task(), suchiterators could keep task_pos pointing to a migrating task, causingcss_task_iter_advance() to malfunction on the destination css_set,up to and including crashes or infinite loops.The race window between migration and iteration is very small, andcss_task_iter is not on a hot path. In the worst case, when aniterator is positioned on the first thread of the migrating process,cgroup_migrate_add_task() may have to skip multiple tasks viacss_set_skip_task_iters(). However, this only happens when migrationand iteration actually race, so the performance impact is negligiblecompared to the correctness fix provided here.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: amd: acp-mach-common: Add missing error check for clock acquisitionThe acp_card_rt5682_init() and acp_card_rt5682s_init() functions did notcheck the return values of clk_get(). This could lead to a kernel crashwhen the invalid pointers are later dereferenced by clock corefunctions.Fix this by:1. Changing clk_get() to the device-managed devm_clk_get().2. Adding IS_ERR() checks immediately after each clock acquisition.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:e1000/e1000e: Fix leak in DMA error cleanupIf an error is encountered while mapping TX buffers, the driver shouldunmap any buffers already mapped for that skb.Because count is incremented after a successful mapping, it will alwaysmatch the correct number of unmappings needed when dma_error is reached.Decrementing count before the while loop in dma_error causes anoff-by-one error. If any mapping was successful before an unsuccessfulmapping, exactly one DMA mapping would leak.In these commits, a faulty while condition caused an infinite loop indma_error:Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000edriver")Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver")Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests ofunsigned in *_tx_map()") fixed the infinite loop, but introduced theoff-by-one error.This issue may still exist in the igbvf driver, but I did not address itin this patch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme-pci: Fix race bug in nvme_poll_irqdisable()In the following scenario, pdev can be disabled between (1) and (3) by(2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() willreturn MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2).This causes IRQ warning because it tries to enable INTx IRQ that hasnever been disabled before.To fix this, save IRQ number into a local variable and ensuredisable_irq() and enable_irq() operate on the same IRQ number. Even ifpci_free_irq_vectors() frees the IRQ concurrently, disable_irq() andenable_irq() on a stale IRQ number is still valid and safe, and thedepth accounting reamins balanced.task 1:nvme_poll_irqdisable() disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1) enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3)task 2:nvme_reset_work() nvme_dev_disable() pdev->msix_enable = 0; ...(2)crash log:------------[ cut here ]------------Unbalanced enable for IRQ 10WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26Modules linked in:CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014Workqueue: kblockd blk_mq_timeout_workRIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9RSP: 0018:ffffc900001bf550 EFLAGS: 00010046RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0Call Trace: enable_irq+0x121/0x1e0 kernel/irq/manage.c:797 nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494 nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744 blk_mq_rq_timed_out block/blk-mq.c:1653 [inline] blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721 bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292 __sbitmap_for_each_set include/linux/sbitmap.h:269 [inline] sbitmap_for_each_set include/linux/sbitmap.h:290 [inline] bt_for_each block/blk-mq-tag.c:324 [inline] blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536 blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 irq event stamp: 74478hardirqs last enabled at (74477): [] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline]hardirqs last enabled at (74477): [] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202hardirqs last disabled at (74478): [] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]hardirqs last disabled at (74478): [] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162softirqs last enabled at (74304): [] __do_softirq kernel/softirq.c:656 [inline]softirqs last enabled at (74304): [] invoke_softirq kernel/softirq.c:496 [inline]softirqs last enabled at (74304): [] __irq_exit_rcu+0xdc/0x120---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_setdev->online_queues is a count incremented in nvme_init_queue. Thus,valid indices are 0 through dev->online_queues − 1.This patch fixes the loop condition to ensure the index stays within thevalid range. Index 0 is excluded because it is the admin queue.KASAN splat:==================================================================BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline]BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014Workqueue: nvme-reset-wq nvme_reset_workCall Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x5d0 mm/kasan/report.c:482 kasan_report+0xdc/0x110 mm/kasan/report.c:595 __asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379 nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Allocated by task 34 on cpu 1 at 4.241550s: kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57 kasan_save_track+0x1c/0x70 mm/kasan/common.c:78 kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5657 [inline] __kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663 kmalloc_array_node_noprof include/linux/slab.h:1075 [inline] nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline] nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534 local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324 pci_call_probe drivers/pci/pci-driver.c:392 [inline] __pci_device_probe drivers/pci/pci-driver.c:417 [inline] pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451 call_driver_probe drivers/base/dd.c:583 [inline] really_probe+0x29b/0xb70 drivers/base/dd.c:661 __driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803 driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833 __driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159 async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129 process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x65c/0xe60 kernel/workqueue.c:3421 kthread+0x41a/0x930 kernel/kthread.c:463 ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246The buggy address belongs to the object at ffff88800592a000 which belongs to the cache kmalloc-2k of size 2048The buggy address is located 244 bytes to the right of allocated 1152-byte region [ffff88800592a000, ffff88800592a480)The buggy address belongs to the physical page:page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff)page_type: f5(slab)raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000head: 000fffffc0000040 ffff888001042000 00000---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table()nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a labelinside the for loop body. When the "last" helper saved in cb->args[1]is deleted between dump rounds, every entry fails the (cur != last)check, so cb->args[1] is never cleared. The for loop finishes withcb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps backinto the loop body bypassing the bounds check, causing an 8-byteout-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize].The 'goto restart' block was meant to re-traverse the current bucketwhen "last" is no longer found, but it was placed after the for loopinstead of inside it. Move the block into the for loop body so thatthe restart only occurs while cb->args[0] is still within bounds. BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0 Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131 Call Trace: nfnl_cthelper_dump_table+0x9f/0x1b0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 sock_recvmsg+0xde/0xf0 __sys_recvfrom+0x150/0x200 __x64_sys_recvfrom+0x76/0x90 do_syscall_64+0xc3/0x6e0 Allocated by task 1: __kvmalloc_node_noprof+0x21b/0x700 nf_ct_alloc_hashtable+0x65/0xd0 nf_conntrack_helper_init+0x21/0x60 nf_conntrack_init_start+0x18d/0x300 nf_conntrack_standalone_init+0x12/0xc0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_queue: fix entry leak in bridge verdict error pathnfqnl_recv_verdict() calls find_dequeue_entry() to remove the queueentry from the queue data structures, taking ownership of the entry.For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLANattributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLANpresent but NFQA_VLAN_TCI missing), the function returns immediatelywithout freeing the dequeued entry or its sk_buff.This leaks the nf_queue_entry, its associated sk_buff, and all heldreferences (net_device refcounts, struct net refcount). Repeatedtriggering exhausts kernel memory.Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdicton the error path, consistent with other error handling in this file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: x_tables: guard option walkers against 1-byte tail readsWhen the last byte of options is a non-single-byte option kind, walkersthat advance with i += op[i + 1] ? : 1 can read op[i + 1] past the endof the option area.Add an explicit i == optlen - 1 check before dereferencing op[i + 1]in xt_tcpudp and xt_dccp option walkers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop()pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as theto_offset argument on every iteration, including the last one wherei == m->field_count - 1. This reads one element past the end of thestack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS]with NFT_PIPAPO_MAX_FIELDS == 16).Although pipapo_unmap() returns early when is_last is true withoutusing the to_offset value, the argument is evaluated at the call sitebefore the function body executes, making this a genuine out-of-boundsstack read confirmed by KASAN: BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables] Read of size 4 at addr ffff8000810e71a4 This frame has 1 object: [32, 160) 'rulemap' The buggy address is at offset 164 -- exactly 4 bytes past the end of the rulemap array.Pass 0 instead of rulemap[i + 1].n on the last iteration to avoidthe out-of-bounds read.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mctp: route: hold key->lock in mctp_flow_prepare_output()mctp_flow_prepare_output() checks key->dev and may callmctp_dev_set_key(), but it does not hold key->lock while doing so.mctp_dev_set_key() and mctp_dev_release_key() are annotated with__must_hold(&key->lock), so key->dev access is intended to beserialized by key->lock. The mctp_sendmsg() transmit path reachesmctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output()without holding key->lock, so the check-and-set sequence is racy.Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devBNow both devA and devB references were acquired, but only the finalkey->dev value is tracked for release. One reference can be lost,causing a resource leak as mctp_dev_release_key() would only decreasethe reference on one dev.Fix by taking key->lock around the key->dev check andmctp_dev_set_key() call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: fix type confusion in bond_setup_by_slave()kernel BUG at net/core/skbuff.c:2306!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTIRIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306RSP: 0018:ffffc90004aff760 EFLAGS: 00010293RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0eRDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0Call Trace: ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa54/0xc30 net/socket.c:2592 ___sys_sendmsg+0x190/0x1e0 net/socket.c:2646 __sys_sendmsg+0x170/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7fe1a0e6c1a9When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,bond_setup_by_slave() directly copies the slave's header_ops to thebond device: bond_dev->header_ops = slave_dev->header_ops;This causes a type confusion when dev_hard_header() is later calledon the bond device. Functions like ipgre_header(), ip6gre_header(),all usenetdev_priv(dev) to access their device-specific private data. Whencalled with the bond device, netdev_priv() returns the bond's privatedata (struct bonding) instead of the expected type (e.g. structip_tunnel), leading to garbage values being read and kernel crashes.Fix this by introducing bond_header_ops with wrapper functions thatdelegate to the active slave's header_ops using the slave's owndevice. This ensures netdev_priv() in the slave's header functionsalways receives the correct device.The fix is placed in the bonding driver rather than individual devicedrivers, as the root cause is bond blindly inheriting header_ops fromthe slave without considering that these callbacks expect a specificnetdev_priv() layout.The type confusion can be observed by adding a printk inipgre_header() and running the following commands: ip link add dummy0 type dummy ip addr add 10.0.0.1/24 dev dummy0 ip link set dummy0 up ip link add gre1 type gre local 10.0.0.1 ip link add bond1 type bond mode active-backup ip link set gre1 master bond1 ip link set gre1 up ip link set bond1 up ip addr add fe80::1/64 dev bond1
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mctp: i2c: fix skb memory leak in receive pathWhen 'midev->allow_rx' is false, the newly allocated skb isn't consumedby netif_rx(), it needs to free the skb directly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:serial: caif: hold tty->link reference in ldisc_open and ser_releaseA reproducer triggers a KASAN slab-use-after-free in pty_write_room()when caif_serial's TX path calls tty_write_room(). The faulting accessis on tty->link->port.Hold an extra kref on tty->link for the lifetime of the caif_serial linediscipline: get it in ldisc_open() and drop it in ser_release(), andalso drop it on the ldisc_open() error path.With this change applied, the reproducer no longer triggers the UAF inmy testing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: soc-core: flush delayed work before removing DAIs and widgetsWhen a sound card is unbound while a PCM stream is open, ause-after-free can occur in snd_soc_dapm_stream_event(), called fromthe close_delayed_work workqueue handler.During unbind, snd_soc_unbind_card() flushes delayed work and thencalls soc_cleanup_card_resources(). Inside cleanup,snd_card_disconnect_sync() releases all PCM file descriptors, andthe resulting PCM close path can call snd_soc_dapm_stream_stop()which schedules new delayed work with a pmdown_time timer delay.Since this happens after the flush in snd_soc_unbind_card(), thenew work is not caught. soc_remove_link_components() then freesDAPM widgets before this work fires, leading to the use-after-free.The existing flush in soc_free_pcm_runtime() also cannot help as itruns after soc_remove_link_components() has already freed the widgets.Add a flush in soc_cleanup_card_resources() aftersnd_card_disconnect_sync() (after which no new PCM closes canschedule further delayed work) and before soc_remove_link_dais()and soc_remove_link_components() (which tear down the structures thedelayed work accesses).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Fix DMA FIFO desync on error CQE SQ recoveryIn case of a TX error CQE, a recovery flow is triggered,mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,desyncing the DMA FIFO producer and consumer.After recovery, the producer pushes new DMA entries at the olddma_fifo_pc, while the consumer reads from position 0.This causes us to unmap stale DMA addresses from before the recovery.The DMA FIFO is a purely software construct with no HW counterpart.At the point of reset, all WQEs have been flushed so dma_fifo_cc isalready equal to dma_fifo_pc. There is no need to reset either counter,similar to how skb_fifo pc/cc are untouched.Remove the 'dma_fifo_cc = 0' reset.This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 asm_common_interrupt+0x22/0x40
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Fix deadlock between devlink lock and esw->wqesw->work_queue executes esw_functions_changed_event_handler ->esw_vfs_changed_event_handler and acquires the devlink lock..eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) ->mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked ->mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlockswhen esw_vfs_changed_event_handler executes.Fix that by no longer flushing the work to avoid the deadlock, and usinga generation counter to keep track of work relevance. This avoids an oldhandler manipulating an esw that has undergone one or more mode changes:- the counter is incremented in mlx5_eswitch_event_handler_unregister.- the counter is read and passed to the ephemeral mlx5_host_work struct.- the work handler takes the devlink lock and bails out if the current generation is different than the one it was scheduled to operate on.- mlx5_eswitch_cleanup does the final draining before destroying the wq.No longer flushing the workqueue has the side effect of maybe no longercancelling pending vport_change_handler work items, but that's ok sincethose are disabled elsewhere:- mlx5_eswitch_disable_locked disables the vport eq notifier.- mlx5_esw_vport_disable disarms the HW EQ notification and marks vport->enabled under state_lock to false to prevent pending vport handler from doing anything.- mlx5_eswitch_cleanup destroys the workqueue and makes sure all events are disabled/finished.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xprtrdma: Decrement re_receiving on the early exit pathsIn the event that rpcrdma_post_recvs() fails to create a work request(due to memory allocation failure, say) or otherwise exits early, weshould decrement ep->re_receiving before returning. Otherwise we willhang in rpcrdma_xprt_drain() as re_receiving will never reach zero andthe completion will never be triggered.On a system with high memory pressure, this can appear as the followinghung task: INFO: task kworker/u385:17:8393 blocked for more than 122 seconds. Tainted: G S E 6.19.0 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000 Workqueue: xprtiod xprt_autoclose [sunrpc] Call Trace: __schedule+0x48b/0x18b0 ? ib_post_send_mad+0x247/0xae0 [ib_core] schedule+0x27/0xf0 schedule_timeout+0x104/0x110 __wait_for_common+0x98/0x180 ? __pfx_schedule_timeout+0x10/0x10 wait_for_completion+0x24/0x40 rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma] xprt_rdma_close+0x12/0x40 [rpcrdma] xprt_autoclose+0x5f/0x120 [sunrpc] process_one_work+0x191/0x3e0 worker_thread+0x2e3/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x10d/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x273/0x2b0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfs: return EISDIR on nfs3_proc_create if d_alias is a dirIf we found an alias through nfs3_do_create/nfs_add_or_obtain/d_splice_alias which happens to be a dir dentry, we don't returnany error, and simply forget about this alias, but the originaldentry we were adding and passed as parameter remains negative.This later causes an oops on nfs_atomic_open_v23/finish_open since wesupply a negative dentry to do_dentry_open.This has been observed running lustre-racer, where dirs and files arecreated/removed concurrently with the same name and O_EXCL is notused to open files (frequent file redirection).While d_splice_alias typically returns a directory alias or NULL, weexplicitly check d_is_dir() to ensure that we don't attempt to performfile operations (like finish_open) on a directory inode, which triggersthe observed oops.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:unshare: fix unshare_fs() handlingThere's an unpleasant corner case in unshare(2), when we have aCLONE_NEWNS in flags and current->fs hadn't been shared at all; in thatcase copy_mnt_ns() gets passed current->fs instead of a private copy,which causes interesting warts in proof of correctness]> I guess if private means fs->users == 1, the condition could still be true.Unfortunately, it's worse than just a convoluted proof of correctness.Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS(and current->fs->users == 1).We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds andflips current->fs->{pwd,root} to corresponding locations in the new namespace.Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it'sdestroyed and its mount tree is dissolved, but... current->fs->root andcurrent->fs->pwd are both left pointing to now detached mounts.They are pinning those, so it's not a UAF, but it leaves the callingprocess with unshare(2) failing with -ENOMEM _and_ leaving it withpwd and root on detached isolated mounts. The last part is clearly a bug.There is other fun related to that mess (races with pivot_root(), includingthe one between pivot_root() and fork(), of all things), but this oneis easy to isolate and fix - treat CLONE_NEWNS as "allocate a newfs_struct even if it hadn't been shared in the first place". Sure, we couldgo for something like "if both CLONE_NEWNS *and* one of the things that mightend up failing after copy_mnt_ns() call in create_new_namespaces() are set,force allocation of new fs_struct", but let's keep it simple - the costof copy_fs_struct() is trivial.Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* getsa freshly allocated fs_struct, yet to be attached to anything. Thatseriously simplifies the analysis...FWIW, that bug had been there since the introduction of unshare(2) ;-/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: mpi3mr: Add NULL checks when resetting request and reply queuesThe driver encountered a crash during resource cleanup when the reply andrequest queues were NULL due to freed memory. This issue occurred when thecreation of reply or request queues failed, and the driver freed the memoryfirst, but attempted to mem set the content of the freed memory, leading toa system crash.Add NULL pointer checks for reply and request queues before accessing thereply/request memory during cleanup
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) insteadof the intended __be32 element size (4 bytes). Use sizeof(*meas) tocorrectly match the buffer element type.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisitionThe acp3x_5682_init() function did not check the return value ofclk_get(), which could lead to dereferencing error pointers inrt5682_clk_enable().Fix this by:1. Changing clk_get() to the device-managed devm_clk_get().2. Adding proper IS_ERR() checks for both clock acquisitions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activatedExplicitly set/clear CR8 write interception when AVIC is (de)activated tofix a bug where KVM leaves the interception enabled after AVIC isactivated. E.g. if KVM emulates INIT=>WFS while AVIC is deactivated, CR8will remain intercepted in perpetuity.On its own, the dangling CR8 intercept is "just" a performance issue, butcombined with the TPR sync bug fixed by commit d02e48830e3f ("KVM: SVM:Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active"), the dangingintercept is fatal to Windows guests as the TPR seen by hardware getswildly out of sync with reality.Note, VMX isn't affected by the bug as TPR_THRESHOLD is explicitly ignoredwhen Virtual Interrupt Delivery is enabled, i.e. when APICv is active inKVM's world. I.e. there's no need to trigger update_cr8_intercept(), thisis firmly an SVM implementation flaw/detail.WARN if KVM gets a CR8 write #VMEXIT while AVIC is active, as KVM shouldnever enter the guest with AVIC enabled and CR8 writes intercepted.[Squash fix to avic_deactivate_vmcb. - Paolo]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mmc: core: Avoid bitfield RMW for claim/retune flagsMove claimed and retune control flags out of the bitfield word toavoid unrelated RMW side effects in asynchronous contexts.The host->claimed bit shared a word with retune flags. Writes to claimedin __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwriteother bits when concurrent updates happen in other contexts, triggeringspurious WARN_ON(!host->claimed). Convert claimed, can_retune,retune_now and retune_paused to bool to remove shared-word coupling.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nouveau/gsp: drop WARN_ON in ACPI probesThese WARN_ONs seem to trigger a lot, and we don't seem to have aplan to fix them, so just drop them, as they are most likelyharmless.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: xhci: Prevent interrupt storm on host controller error (HCE)The xHCI controller reports a Host Controller Error (HCE) in UAS StorageDevice plug/unplug scenarios on Android devices. HCE is checked inxhci_irq() function and causes an interrupt storm (since the interruptisn't cleared), leading to severe system-level faults.When the xHC controller reports HCE in the interrupt handler, the driveronly logs a warning and assumes xHC activity will stop as stated in xHCIspecification. An interrupt storm does however continue on some hostseven after HCE, and only ceases after manually disabling xHC interruptand stopping the controller by calling xhci_halt().Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,mirroring the existing error handling pattern used for STS_FATAL errors.This only fixes the interrupt storm. Proper HCE recovery requires resettingand re-initializing the xHC.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: validate inherited ACE SID lengthsmb_inherit_dacl() walks the parent directory DACL loaded from thesecurity descriptor xattr. It verifies that each ACE contains the fixedSID header before using it, but does not verify that the variable-lengthSID described by sid.num_subauth is fully contained in the ACE.A malformed inheritable ACE can advertise more subauthorities than arepresent in the ACE. compare_sids() may then read past the ACE.smb_set_ace() also clamps the copied destination SID, but used theunchecked source SID count to compute the inherited ACE size. That couldadvance the temporary inherited ACE buffer pointer and nt_size accountingpast the allocated buffer.Fix this by validating the parent ACE SID count and SID length beforeusing the SID during inheritance. Compute the inherited ACE size from thecopied SID so the size matches the bounded destination SID. Reject theinherited DACL if size accumulation would overflow smb_acl.size or thesecurity descriptor allocation size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()Yiming reports an integer underflow in mpi_read_raw_from_sgl() whensubtracting "lzeros" from the unsigned "nbytes".For this to happen, the scatterlist "sgl" needs to occupy more bytesthan the "nbytes" parameter and the first "nbytes + 1" bytes of thescatterlist must be zero. Under these conditions, the while loopiterating over the scatterlist will count more zeroes than "nbytes",subtract the number of zeroes from "nbytes" and cause the underflow.When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originallyintroduced the bug, it couldn't be triggered because all callers ofmpi_read_raw_from_sgl() passed a scatterlist whose length was equal to"nbytes".However since commit 63ba4d67594a ("KEYS: asymmetric: Use new cryptointerface without scatterlists"), the underflow can now actually betriggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with alarger "out_len" than "in_len" and filling the "in" buffer with zeroes,crypto_akcipher_sync_prep() will create an all-zero scatterlist used forboth the "src" and "dst" member of struct akcipher_request and therebyfulfil the conditions to trigger the bug: sys_keyctl() keyctl_pkey_e_d_s() asymmetric_key_eds_op() software_key_eds_op() crypto_akcipher_sync_encrypt() crypto_akcipher_sync_prep() crypto_akcipher_encrypt() rsa_enc() mpi_read_raw_from_sgl()To the user this will be visible as a DoS as the kernel spins forever,causing soft lockup splats as a side effect.Fix it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: pcrypt - Fix handling of MAY_BACKLOG requestsMAY_BACKLOG requests can return EBUSY. Handle them by checkingfor that value and filtering out EINPROGRESS notifications.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peekedWhen red qdisc has children (eg qfq qdisc) whose peek() callback isqdisc_peek_dequeued(), we could get a kernel panic. When the parent of suchqdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb fromits child (red in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(red) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (red). And herein lies the problem. - red will call the child's dequeue() which will essentially just try to grab something of qfq's queue.[ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f][ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full)[ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011[ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq][ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d[ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216[ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000[ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048[ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078[ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000[ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200[ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000[ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0[ 78.671585][ T363] PKRU: 55555554[ 78.671713][ T363] Call Trace:[ 78.671843][ T363] [ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq][ 78.672148][ T363] ? __pfx__printk+0x10/0x10[ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5[ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0[ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5[ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0[ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red][ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5[ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf][ 78.673566][ T363] __qdisc_run+0x169/0x1900The right thing to do in #1b is to grab the skb off gso_skb queue.This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()method instead.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/rds: handle zerocopy send cleanup before the message is queuedA zerocopy send can fail after user pages have been pinned but beforethe message is attached to the sending socket.The purge path currently infers zerocopy state from rm->m_rs, so anunqueued message can be cleaned up as if it owned normal payload pages.However, zerocopy ownership is really determined by the presence ofop_mmp_znotifier, regardless of whether the message has reached thesocket queue.Capture op_mmp_znotifier up front in rds_message_purge() and use it asthe cleanup discriminator. If the message is already associated with asocket, keep the existing completion path. Otherwise, drop the pinnedpage accounting directly and release the notifier before putting thepayload pages.This keeps early send failure cleanup consistent with the zerocopylifetime rules without changing the normal queued completion path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: jq is a command-line JSON processor. In 1.8.1 and earlier, unbounded recursion in jv_object_merge_recursive() allows a crafted jq program to crash the process with a segfault. The function is reachable through the * operator when both operands are objects.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: jq is a command-line JSON processor. In 1.8.2rc1 and earlier, the ordinary module loader recurses without cycle detection when twootherwise valid modules include each other.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb()Add the same NULL guard already present inl2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_new_connection_cb()Add the same NULL guard already present inl2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_get_sndtimeo_cb()Add the same NULL guard already present inl2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: fix end-of-list detection in cgroup_storage_get_next_key()list_next_entry() never returns NULL -- when the current element is thelast entry it wraps to the list head via container_of(). The subsequentNULL check is therefore dead code and get_next_key() never returns-ENOENT for the last element, instead reading storage->key from a boguspointer that aliases internal map fields and copying the result touserspace.Replace it with list_entry_is_head() so the function correctly returns-ENOENT when there are no more entries.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec()CO-RE accessor strings are colon-separated indices that describe a pathfrom a root BTF type to a target field, e.g. "0:1:2" walks throughnested struct members. bpf_core_parse_spec() parses each component withsscanf("%d"), so negative values like -1 are silently accepted. Thesubsequent bounds checks (access_idx >= btf_vlen(t)) only guard theupper bound and always pass for negative values because C integerpromotion converts the __u16 btf_vlen result to int, making thecomparison (int)(-1) >= (int)(N) false for any positive N.When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff,producing an out-of-bounds read far past the members array. A craftedBPF program with a negative CO-RE accessor on any struct that exists invmlinux BTF (e.g. task_struct) crashes the kernel deterministicallyduring BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y(default on major distributions). The bug is reachable with CAP_BPF: BUG: unable to handle page fault for address: ffffed11818b6626 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full) RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354) RAX: 00000000ffffffff Call Trace: bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321) bpf_core_apply (kernel/bpf/btf.c:9507) check_core_relo (kernel/bpf/verifier.c:19475) bpf_check (kernel/bpf/verifier.c:26031) bpf_prog_load (kernel/bpf/syscall.c:3089) __sys_bpf (kernel/bpf/syscall.c:6228) CO-RE accessor indices are inherently non-negative (struct member index,array element index, or enumerator index), so reject them immediatelyafter parsing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: remove WARN_ON_ONCE when accessing forward path arrayAlthough unlikely, recent support for IPIP tunnels increases chances ofreaching this WARN_ON_ONCE if userspace manages to build a sufficientlylong forward path.Remove it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:apparmor: fix NULL sock in aa_sock_file_permDeal with the potential that sock and sock-sk can be NULL duringsocket setup or teardown. This could lead to an oops. The fix for NULLpointer dereference in __unix_needs_revalidation shows this is atleast possible for af_unix sockets. While the fix for af_unix socketsapplies for newer mediation this is still the fall back path for olderaf_unix mediation and other sockets, so ensure it is covered.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ata: libata-scsi: avoid Non-NCQ command starvationWhen a non-NCQ command is issued while NCQ commands are being executed,ata_scsi_qc_issue() indicates to the SCSI layer that the command issuingshould be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This commanddeferring is correct and as mandated by the ACS specifications sinceNCQ and non-NCQ commands cannot be mixed.However, in the case of a host adapter using multiple submission queues,when the target device is under a constant load of NCQ commands, thereare no guarantees that requeueing the non-NCQ command will be executedlater and it may be deferred again repeatedly as other submission queuescan constantly issue NCQ commands from different CPUs ahead of thenon-NCQ command. This can lead to very long delays for the execution ofnon-NCQ commands, and even complete starvation for these commands in theworst case scenario.Since the block layer and the SCSI layer do not distinguish betweenqueueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SATimplementation must ensure forward progress for non-NCQ commands in thepresence of NCQ command traffic. This is similar to what SAS HBAs with ahardware/firmware based SAT implementation do.Implement such forward progress guarantee by limiting requeueing ofnon-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command isreceived and NCQ commands are in-flight, do not force a requeue of thenon-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0to indicate that the command was accepted but hold on to the qc usingthe new deferred_qc field of struct ata_port.This deferred qc will be issued using the work item deferred_qc_workrunning the function ata_scsi_deferred_qc_work() once all in-flightcommands complete, which is checked with the port qc_defer() callbackreturn value indicating that no further delay is necessary. This checkis done using the helper function ata_scsi_schedule_deferred_qc() whichis called from ata_scsi_qc_complete(). This thus excludes this mechanismfrom all internal non-NCQ commands issued by ATA EH.When a port deferred_qc is non NULL, that is, the port has a commandwaiting for the device queue to drain, the issuing of all incomingcommands (both NCQ and non-NCQ) is deferred using the regular busymechanism. This simplifies the code and also avoids potential denial ofservice problems if a user issues too many non-NCQ commands.Finally, whenever ata EH is scheduled, regardless of the reason, adeferred qc is always requeued so that it can be retried once EHcompletes. This is done by calling the functionata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoidsthe need for any special processing for the deferred qc in case of NCQerror, link or device reset, or device timeout.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: csiostor: Fix dereference of null pointer rnThe error exit path when rn is NULL ends up deferencing the null pointer rnvia the use of the macro CSIO_INC_STATS. Fix this by adding a new errorreturn path label after the use of the macro to avoid the deference.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1When allocating initialized blocks from a large unwritten extent, orwhen splitting an unwritten extent during end I/O and converting it toinitialized, there is currently a potential issue of stale data if theextent needs to be split in the middle. 0 A B N [UUUUUUUUUUUU] U: unwritten extent [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initializedext4_split_extent() first try to split this extent at B withEXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, butext4_split_extent_at() failed to split this extent due to temporary lackof space. It zeroout B to N and mark the entire extent from 0 to Nas written. 0 A B N [WWWWWWWWWWWW] W: written extent [SSDDDDDDDDZZ] Z: zeroed, S: stale dataext4_split_extent() then try to split this extent at A withEXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and lefta stale written extent from 0 to A. 0 A B N [WW|WWWWWWWWWW] [SS|DDDDDDDDZZ]Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()when splitting at B, don't convert the entire extent to written and leftit as unwritten after zeroing out B to N. The remaining work is justlike the standard two-part split. ext4_split_extent() will pass theEXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for thesecond time, allowing it to properly handle the split. If the split issuccessful, it will keep extent from 0 to A as unwritten.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pinctrl: single: fix refcount leak in pcs_add_gpio_func()of_parse_phandle_with_args() returns a device_node pointer with refcountincremented in gpiospec.np. The loop iterates through all phandles butnever releases the reference, causing a refcount leak on each iteration.Add of_node_put() calls to release the reference after extracting theneeded arguments and on the error path when devm_kzalloc() fails.This bug was detected by our static analysis tool and verified by mycode review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_rbtree: check for partial overlaps in anonymous setsUserspace provides an optimized representation in case intervals areadjacent, where the end element is omitted.The existing partial overlap detection logic skips anonymous set checkson start elements for this reason.However, it is possible to add intervals that overlap to this anonymouswhere two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A CRestore the check on overlapping start elements to report an overlap.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI/P2PDMA: Release per-CPU pgmap ref when vm_insert_page() failsWhen vm_insert_page() fails in p2pmem_alloc_mmap(), p2pmem_alloc_mmap()doesn't invoke percpu_ref_put() to free the per-CPU ref of pgmap acquiredafter gen_pool_alloc_owner(), and memunmap_pages() will hang forever whentrying to remove the PCI device.Fix it by adding the missed percpu_ref_put().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:apparmor: Fix & Optimize table creation from possibly unaligned memorySource blob may come from userspace and might be unaligned.Try to optize the copying process by avoiding unaligned memory accesses.- Added Fixes tag- Added "Fix &" to description as this doesn't just optimize but fixes a potential unaligned memory access[jj: remove duplicate word "convert" in comment trigger checkpatch warning]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: drop extent cache when splitting extent failsWhen the split extent fails, we might leave some extents still beingprocessed and return an error directly, which will result in staleextent entries remaining in the extent status tree. So drop all of theremaining potentially stale extents if the splitting fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: caam - fix netdev memory leak in dpaa2_caam_probeWhen commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure indpaa2") converted embedded net_device to dynamically allocated pointers,it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup indpaa2_dpseci_free() for error paths.This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probedue to DPIO devices not being ready yet. The kernel's deferred probemechanism handles the retry successfully, but the netdevs allocated duringthe failed probe attempt are never freed, resulting in kmemleak reportsshowing multiple leaked netdev-related allocations all traced back todpaa2_caam_probe().Fix this by preserving the CPU mask of allocated netdevs during setup andusing it for cleanup in dpaa2_dpseci_free(). This approach ensures thatonly the CPUs that actually had netdevs allocated will be cleaned up,avoiding potential issues with CPU hotplug scenarios.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: fix ip_rt_bug race in icmp_route_lookup reverse pathicmp_route_lookup() performs multiple route lookups to find a suitableroute for sending ICMP error messages, with special handling for XFRM(IPsec) policies.The lookup sequence is:1. First, lookup output route for ICMP reply (dst = original src)2. Pass through xfrm_lookup() for policy check3. If blocked (-EPERM) or dst is not local, enter "reverse path"4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec which reverses the original packet's flow (saddr<->daddr swapped)5. If fl4_dec.saddr is local (we are the original destination), use __ip_route_output_key() for output route lookup6. If fl4_dec.saddr is NOT local (we are a forwarding node), use ip_route_input() to simulate the reverse packet's input path7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flagThe bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr(original packet's source) as destination. If this address becomes localbetween the initial check and ip_route_input() call (e.g., due toconcurrent "ip addr add"), ip_route_input() returns a LOCAL route withdst.output set to ip_rt_bug.This route is then used for ICMP output, causing dst_output() to callip_rt_bug(), triggering a WARN_ON: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1 Call Trace: ip_push_pending_frames+0x202/0x240 icmp_push_reply+0x30d/0x430 __icmp_send+0x1149/0x24f0 ip_options_compile+0xa2/0xd0 ip_rcv_finish_core+0x829/0x1950 ip_rcv+0x2d7/0x420 __netif_receive_skb_one_core+0x185/0x1f0 netif_receive_skb+0x90/0x450 tun_get_user+0x3413/0x3fb0 tun_chr_write_iter+0xe4/0x220 ...Fix this by checking rt2->rt_type after ip_route_input(). If it'sRTN_LOCAL, the route cannot be used for output, so treat it as an error.The reproducer requires kernel modification to widen the race window,making it unsuitable as a selftest. It is available at: https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: cdns3: fix role switching during resumeIf the role change while we are suspended, the cdns3 driver switches to thenew mode during resume. However, switching to host mode in this contextcauses a NULL pointer dereference.The host role's start() operation registers a xhci-hcd device, but itsprobe is deferred while we are in the resume path. The host role's resume()operation assumes the xhci-hcd device is already probed, which is not thecase, leading to the dereference. Since the start() operation of the newrole is already called, the resume operation can be skipped.So skip the resume operation for the new role if a role switch occursduring resume. Once the resume sequence is complete, the xhci-hcd devicecan be probed in case of host mode.Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208Mem abort info:...Data abort info:...[0000000000000208] pgd=0000000000000000, p4d=0000000000000000Internal error: Oops: 0000000096000004 [#1] SMPModules linked in:CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPTHardware name: Texas Instruments J7200 EVM (DT)pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : usb_hcd_is_primary_hcd+0x0/0x1clr : cdns_host_resume+0x24/0x5c...Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19cCode: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)---[ end trace 0000000000000000 ]---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: don't cache extent during splitting extentCaching extents during the splitting process is risky, as it may resultin stale extents remaining in the status tree. Moreover, in most cases,the corresponding extent block entries are likely already cached beforethe split happens, making caching here not particularly useful.Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this rangeFirst, when ext4_split_extent_at() splits this extent, it truncates theexisting extent and then inserts a new one. During this process, thisextent status entry may be shrunk, and calls to ext4_find_extent() andext4_cache_extents() may occur, which could potentially insert thetruncated range as a hole into the extent status tree. After the splitis completed, this hole is not replaced with the correct status. [UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent [UUUUUUU|HHHHHHHH] extent status tree H: holeThen, the outer calling functions will not correct this remaining holeextent either. Finally, if we perform a delayed buffer write on thislatter part, it will re-insert the delayed extent and cause an error inspace accounting.In adition, if the unwritten extent cache is not shrunk during thesplitting, ext4_cache_extents() also conflicts with existing extentswhen caching extents. In the future, we will add checks when cachingextents, which will trigger a warning. Therefore, Do not cache extentsthat are being split.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bridge: mcast: always update mdb_n_entries for vlan contextssyzbot triggered a warning[1] about the number of mdb entries in a context.It turned out that there are multiple ways to trigger that warning today(some got added during the years), the root cause of the problem is thatthe increase is done conditionally, and over the years these differentconditions increased so there were new ways to trigger the warning, that isto do a decrease which wasn't paired with a previous increase.For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entriesFix the problem by removing the conditional increase and always keep thecount up-to-date while the vlan exists. In order to do that we have tofirst initialize it on port-vlan context creation, and then always increaseor decrease the value regardless of mcast options. To keep the currentbehaviour we have to enforce the mdb limit only if the context is port's orif the port-vlan's mcast snooping is enabled.[1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socke---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fat: avoid parent link count underflow in rmdirCorrupted FAT images can leave a directory inode with an incorrecti_nlink (e.g. 2 even though subdirectories exist). rmdir thenunconditionally calls drop_nlink(dir) and can drive i_nlink to 0,triggering the WARN_ON in drop_nlink().Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop theparent link count when it is at least 3, otherwise report a filesystemerror.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: sbs-battery: Fix use-after-free in power_supply_changed()Using the `devm_` variant for requesting IRQ _before_ the `devm_`variant for allocating/registering the `power_supply` handle, means thatthe `power_supply` handle will be deallocated/unregistered _before_ theinterrupt handler (since `devm_` naturally deallocates in reverseallocation order). This means that during removal, there is a racecondition where an interrupt can fire just _after_ the `power_supply`handle has been freed, *but* just _before_ the correspondingunregistration of the IRQ handler has run.This will lead to the IRQ handler calling `power_supply_changed()` witha freed `power_supply` handle. Which usually crashes the system orotherwise silently corrupts the memory...Note that there is a similar situation which can also happen during`probe()`; the possibility of an interrupt firing _before_ registeringthe `power_supply` handle. This would then lead to the nasty situationof using the `power_supply` handle *uninitialized* in`power_supply_changed()`.Fix this racy use-after-free by making sure the IRQ is requested _after_the registration of the `power_supply` handle. Keep the old behavior ofjust printing a warning in case of any failures during the IRQ requestand finishing the probe successfully.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipvs: do not keep dest_dst if dev is going downThere is race between the netdev notifier ip_vs_dst_event()and the code that caches dst with dev that is going down.As the FIB can be notified for the closed device after ourhandler finishes, it is possible valid route to be returnedand cached resuling in a leaked dev reference until the destis not removed.To prevent new dest_dst to be attached to dest just after thehandler dropped the old one, add a netif_running() checkto make sure the notifier handler is not currently runningfor device that is closing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix dirtyclusters double decrement on fs shutdownfstests test generic/388 occasionally reproduces a warning inext4_put_super() associated with the dirty clusters count: WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4]Tracing the failure shows that the warning fires due to ans_dirtyclusters_counter value of -1. IOW, this appears to be aspurious decrement as opposed to some sort of leak. Further tracingof the dirty cluster count deltas and an LLM scan of the resultingoutput identified the cause as a double decrement in the error pathbetween ext4_mb_mark_diskspace_used() and the callerext4_mb_new_blocks().First, note that generic/388 is a shutdown vs. fsstress test and soproduces a random set of operations and shutdown injections. In theproblematic case, the shutdown triggers an error return from theext4_handle_dirty_metadata() call(s) made fromext4_mb_mark_context(). The changed value is non-zero at this point,so ext4_mb_mark_diskspace_used() does not exit after the errorbubbles up from ext4_mb_mark_context(). Instead, the formerdecrements both cluster counters and returns the error up toext4_mb_new_blocks(). The latter falls into the !ar->len out pathwhich decrements the dirty clusters counter a second time, creatingthe inconsistency.To avoid this problem and simplify ownership of the clusterreservation in this codepath, lift the counter reduction to a singleplace in the caller. This makes it more clear thatext4_mb_new_blocks() is responsible for acquiring clusterreservation (via ext4_claim_free_clusters()) in the !delalloc caseas well as releasing it, regardless of whether it ends up consumedor returned due to failure.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: call ksmbd_vfs_kern_path_end_removing() on some error pathsThere are two places where ksmbd_vfs_kern_path_end_removing() needs to becalled in order to balance what the corresponding successful call toksmbd_vfs_kern_path_start_removing() has done, i.e. drop inode locks andput the taken references. Otherwise there might be potential deadlocksand unbalanced locks which are caught like:BUG: workqueue leaked lock or atomic: kworker/5:21/0x00000000/7596 last function: handle_ksmbd_work2 locks held by kworker/5:21/7596: #0: ffff8881051ae448 (sb_writers#3){.+.+}-{0:0}, at: ksmbd_vfs_kern_path_locked+0x142/0x660 #1: ffff888130e966c0 (&type->i_mutex_dir_key#3/1){+.+.}-{4:4}, at: ksmbd_vfs_kern_path_locked+0x17d/0x660CPU: 5 PID: 7596 Comm: kworker/5:21 Not tainted 6.1.162-00456-gc29b353f383b #138Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014Workqueue: ksmbd-io handle_ksmbd_workCall Trace: dump_stack_lvl+0x44/0x5b process_one_work.cold+0x57/0x5c worker_thread+0x82/0x600 kthread+0x153/0x190 ret_from_fork+0x22/0x30 Found by Linux Verification Center (linuxtesting.org).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mctp: ensure our nlmsg responses are initialisedSyed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) fromDEVCORE Research Team working with Trend Micro Zero Day Initiativereport that a RTM_GETNEIGH will return uninitalised data in the padbytes of the ndmsg data.Ensure we're initialising the netlink data to zero, in the link, addrand neigh response messages.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: goldfish: Fix use-after-free in power_supply_changed()Using the `devm_` variant for requesting IRQ _before_ the `devm_`variant for allocating/registering the `power_supply` handle, means thatthe `power_supply` handle will be deallocated/unregistered _before_ theinterrupt handler (since `devm_` naturally deallocates in reverseallocation order). This means that during removal, there is a racecondition where an interrupt can fire just _after_ the `power_supply`handle has been freed, *but* just _before_ the correspondingunregistration of the IRQ handler has run.This will lead to the IRQ handler calling `power_supply_changed()` witha freed `power_supply` handle. Which usually crashes the system orotherwise silently corrupts the memory...Note that there is a similar situation which can also happen during`probe()`; the possibility of an interrupt firing _before_ registeringthe `power_supply` handle. This would then lead to the nasty situationof using the `power_supply` handle *uninitialized* in`power_supply_changed()`.Fix this racy use-after-free by making sure the IRQ is requested _after_the registration of the `power_supply` handle.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: stmmac: fix oops when split header is enabledFor GMAC4, when split header is enabled, in some rare cases, thehardware does not fill buf2 of the first descriptor with payload.Thus we cannot assume buf2 is always fully filled if it is notthe last descriptor. Otherwise, the length of buf2 of the seconddescriptor will be calculated wrong and cause an oops:Unable to handle kernel paging request at virtual address ffff00019246bfc0...x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000Call trace: dcache_inval_poc+0x28/0x58 (P) dma_direct_sync_single_for_cpu+0x38/0x6c __dma_sync_single_for_cpu+0x34/0x6c stmmac_napi_poll_rx+0x8f0/0xb60 __napi_poll.constprop.0+0x30/0x144 net_rx_action+0x160/0x274 handle_softirqs+0x1b8/0x1fc...To fix this, the PL bit-field in RDES3 register is used for alldescriptors, whether it is the last descriptor or not.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tpm: tpm_i2c_infineon: Fix locality leak on get_burstcount() failureget_burstcount() can return -EBUSY on timeout. When this happens, thefunction returns directly without releasing the locality that wasacquired at the beginning of tpm_tis_i2c_send().Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix memory leak in ext4_ext_shift_extents()In ext4_ext_shift_extents(), if the extent is NULL in the while loop, thefunction returns immediately without releasing the path obtained viaext4_find_extent(), leading to a memory leak.Fix this by jumping to the out label to ensure the path is properlyreleased.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rcu: Fix rcu_read_unlock() deadloop due to softirqCommit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in__rcu_read_unlock()") removes the recursion-protection code from__rcu_read_unlock(). Therefore, we could invoke the deadloop inraise_softirq_irqoff() with ftrace enabled as follows:WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180Modules linked in: my_irq_work(O)CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full)Tainted: [O]=OOT_MODULEHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180RSP: 0018:ffffc900000034a8 EFLAGS: 00010002RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4cR10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0PKRU: 55555554Call Trace: trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 unwind_next_frame+0x203/0x9b0 __unwind_start+0x15d/0x1c0 arch_stack_walk+0x62/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 raise_softirq_irqoff+0x6e/0xa0 rcu_read_unlock_special+0xb1/0x160 __is_insn_slot_addr+0x54/0x70 kernel_text_address+0x48/0xc0 __kernel_text_address+0xd/0x40 unwind_get_return_address+0x1e/0x40 arch_stack_walk+0x9c/0xf0 stack_trace_save+0x48/0x70 __ftrace_trace_stack.constprop.0+0x144/0x180 trace_buffer_unlock_commit_regs+0x6d/0x220 trace_event_buffer_commit+0x5c/0x260 trace_event_raw_event_softirq+0x47/0x80 __raise_softirq_irqoff+0x61/0x80 __flush_smp_call_function_queue+0x115/0x420 __sysvec_call_function_single+0x17/0xb0 sysvec_call_function_single+0x8c/0xc0 Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")fixed the infinite loop in rcu_read_unlock_special() for IRQ work bysetting a flag before calling irq_work_queue_on(). We fix this issue bysetting the same flag before calling raise_softirq_irqoff() and rename theflag to defer_qs_pending for more common.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: return error when node already exists in hfs_bnode_createWhen hfs_bnode_create() finds that a node is already hashed (which shouldnot happen in normal operation), it currently returns the existing nodewithout incrementing its reference count. This causes a reference countinconsistency that leads to a kernel panic when the node is later freedin hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt))This scenario can occur when hfs_bmap_alloc() attempts to allocate a nodethat is already in use (e.g., when node 0's bitmap bit is incorrectlyunset), or due to filesystem corruption.Returning an existing node from a create path is not normal operation.Fix this by returning ERR_PTR(-EEXIST) instead of the node when it'salready hashed. This properly signals the error condition to callers,which already check for IS_ERR() return values.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ublk: Validate SQE128 flag before accessing the cmdublk_ctrl_cmd_dump() accesses (header *)sqe->cmd beforeIO_URING_F_SQE128 flag check. This could cause out of boundary memoryaccess.Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return-EINVAL immediately if the flag is not set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:SUNRPC: fix gss_auth kref leak in gss_alloc_msg error pathCommit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") addeda kref_get(&gss_auth->kref) call to balance the gss_put_auth() donein gss_release_msg(), but forgot to add a corresponding kref_put()on the error path when kstrdup_const() fails.If service_name is non-NULL and kstrdup_const() fails, the functionjumps to err_put_pipe_version which calls put_pipe_version() andkfree(gss_msg), but never releases the gss_auth reference. This leadsto a kref leak where the gss_auth structure is never freed.Add a forward declaration for gss_free_callback() and call kref_put()in the err_put_pipe_version error path to properly release thereference taken earlier.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:apparmor: fix invalid deref of rawdata when export_binary is unsetIf the export_binary parameter is disabled on runtime, profiles thatwere loaded before that will still have their rawdata stored inapparmorfs, with a symbolic link to the rawdata on the policydirectory. When one of those profiles are replaced, the rawdata is setto NULL, but when trying to resolve the symbolic links to rawdata forthat profile, it will try to dereference profile->rawdata->name whenprofile->rawdata is now NULL causing an oops. Fix it by checking ifrawdata is set.[ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088[ 168.657420] #PF: supervisor read access in kernel mode[ 168.660619] #PF: error_code(0x0000) - not-present page[ 168.663613] PGD 0 P4D 0[ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI[ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary)[ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330[ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8[ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282[ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158[ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80[ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000[ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80[ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0[ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000[ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0[ 168.701696] Call Trace:[ 168.702325] [ 168.702995] rawdata_get_link_data+0x1c/0x30[ 168.704145] vfs_readlink+0xd4/0x160[ 168.705152] do_readlinkat+0x114/0x180[ 168.706214] __x64_sys_readlink+0x1e/0x30[ 168.708653] x64_sys_call+0x1d77/0x26b0[ 168.709525] do_syscall_64+0x81/0x500[ 168.710348] ? do_statx+0x72/0xb0[ 168.711109] ? putname+0x3e/0x80[ 168.711845] ? __x64_sys_statx+0xb7/0x100[ 168.712711] ? x64_sys_call+0x10fc/0x26b0[ 168.713577] ? do_syscall_64+0xbf/0x500[ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0[ 168.715404] ? irqentry_exit+0xb2/0x740[ 168.716359] ? exc_page_fault+0x90/0x1b0[ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cpuidle: Skip governor when only one idle state is availableOn certain platforms (PowerNV systems without a power-mgt DT node),cpuidle may register only a single idle state. In cases where thatsingle state is a polling state (state 0), the ladder governor mayincorrectly treat state 1 as the first usable state and pass anout-of-bounds index. This can lead to a NULL enter callback beinginvoked, ultimately resulting in a system crash.[ 13.342636] cpuidle-powernv : Only Snooze is available[ 13.351854] Faulting instruction address: 0x00000000[ 13.376489] NIP [0000000000000000] 0x0[ 13.378351] LR [c000000001e01974] cpuidle_enter_state+0x2c4/0x668Fix this by adding a bail-out in cpuidle_select() that returns state 0directly when state_count <= 1, bypassing the governor and keeping thetick running.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: playstation: Add missing check for input_ff_create_memlessThe ps_gamepad_create() function calls input_ff_create_memless()without verifying its return value, which can lead to incorrectbehavior or potential crashes when FF effects are triggered.Add a check for the return value of input_ff_create_memless().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not foundIf btrfs_search_slot_for_read() returns 1, it means we did not find anykey greater than or equals to the key we asked for, meaning we havereached the end of the tree and therefore the path is not valid. Ifthis happens we need to break out of the loop and stop, instead ofcontinuing and accessing an invalid path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/cio: Fix device lifecycle handling in css_alloc_subchannel()`css_alloc_subchannel()` calls `device_initialize()` before setting upthe DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,the error path frees the subchannel structure directly, bypassingthe device model reference counting.Once `device_initialize()` has been called, the embedded struct devicemust be released via `put_device()`, allowing the release callback tofree the container structure.Fix the error path by dropping the initial device reference with`put_device()` instead of calling `kfree()` directly.This ensures correct device lifetime handling and avoids potentialuse-after-free or double-free issues.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch()Cover a missed execution path with a new check.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfsd: never defer requests during idmap lookupDuring v4 request compound arg decoding, some ops (e.g. SETATTR)can trigger idmap lookup upcalls. When those upcall responses getdelayed beyond the allowed time limit, cache_check() will mark therequest for deferral and cause it to be dropped.This prevents nfs4svc_encode_compoundres from being executed, andthus the session slot flag NFSD4_SLOT_INUSE never gets cleared.Subsequent client requests will fail with NFSERR_JUKEBOX, giventhat the slot will be marked as in-use, making the SEQUENCE opfail.Fix this by making sure that the RQ_USEDEFERRAL flag is alwaysclear during nfs4svc_decode_compoundargs(), since no v4 requestshould ever be deferred.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/OWhen allocating blocks during within-EOF DIO and writeback withdioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split anexisting large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT wasset when calling ext4_split_convert_extents(), which may potentiallyresult in stale data issues.Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this rangeFirst, ext4_iomap_alloc() call ext4_map_blocks() withEXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT andEXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent andcall ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and theabove flags set.Then, ext4_split_convert_extents() calls ext4_split_extent() withEXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2flags set, and it calls ext4_split_extent_at() to split the second halfwith EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUTand EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at()failed to insert extent since a temporary lack -ENOSPC. It zeroes outthe first half but convert the entire on-disk extent to written sincethe EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwrittenin the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status treeFinally, if the DIO failed to write data to the disk, the stale data inthe second half will be exposed once the cached extent entry is gone.Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splittingan unwritten extent before submitting I/O, and makeext4_split_convert_extents() to zero out the entire extent rangeto zero for this case, and also mark the extent in the extent statustree for consistency.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: ccree - fix a memory leak in cc_mac_digest()Add cc_unmap_result() if cc_map_hash_request_final()fails to prevent potential memory leak.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncsfields written by the CPU from vmcb02 to the cached vmcb12. This isbecause the cached vmcb12 is used as the authoritative copy of some ofthe controls, and is the payload when saving/restoring nested state.int_state is also written by the CPU, specifically bit 0 (i.e.SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd tocached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATEpreceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadowwould be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwriteswhat KVM_SET_NESTED_STATE restored in int_state).However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, aninterrupt shadow would be restored into vmcb01 instead of vmcb02. Thiswould mostly be benign for L1 (delays an interrupt), but not for L2. ForL2, the vCPU could hang (e.g. if a wakeup interrupt is delivered beforea HLT that should have been in an interrupt shadow).Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02()to avoid this problem. With that, KVM_SET_NESTED_STATE restores thecorrect interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows itwould overwrite it with the same value.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ibmasm: fix OOB reads in command_file_write due to missing size checksThe command_file_write() handler allocates a kernel buffer of exactlycount bytes and copies user data into it, but does not validate thebuffer against the dot command protocol before passing it toget_dot_command_size() and get_dot_command_timeout().Since both the allocation size (count) and the header fields (command_size,data_size) are independently user-controlled, an attacker can causeget_dot_command_size() to return a value exceeding the allocation,triggering OOB reads in get_dot_command_timeout() and an out-of-boundsmemcpy_toio() that leaks kernel heap memory to the service processor.Fix with two guards: reject writes smaller than sizeof(structdot_command_header) before allocation, then after copying user datareject commands where the buffer is smaller than the total size declaredby the header (sizeof(header) + command_size + data_size). This ensuresall subsequent header and payload field accesses stay within the buffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: imx: fix use-after-free on unbindThe SPI subsystem frees the controller and any subsystem allocateddriver data as part of deregistration (unless the allocation is devicemanaged).Take another reference before deregistering the controller so that thedriver data is not freed until the driver is done with it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: sd: fix missing put_disk() when device_add(&disk_dev) failsIf device_add(&sdkp->disk_dev) fails, put_device() runsscsi_disk_release(), which frees the scsi_disk but leaves the gendiskreferenced. The device_add_disk() error path in sd_probe() callsput_disk(gd); call put_disk(gd) here to mirror that cleanup.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix potential UAF after skb_unshare() failureIf skb_unshare() fails to unshare a packet due to allocation failure inrxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())will be NULL'd out. This will likely cause the call totrace_rxrpc_rx_done() to oops.Fix this by moving the unsharing down to where rxrpc_input_call_event()calls rxrpc_input_call_packet(). There are a number of places prior tothat where we ignore DATA packets for a variety of reasons (such as thecall already being complete) for which an unshare is then avoided.And with that, rxrpc_input_packet() doesn't need to take a pointer to thepointer to the packet, so change that to just a pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()Some crafted images can have illegal (!partial_decoding &&m_llen < m_plen) extents, and the LZ4 inplace decompression pathcan be wrongly hit, but it cannot handle (outpages < inpages)properly: "outpages - inpages" wraps to a large value andthe subsequent rq->out[] access reads past the decompressed_pagesarray.However, such crafted cases can correctly result in a corruptionreport in the normal LZ4 non-inplace path.Let's add an additional check to fix this for backporting.Reproducible image (base64-encoded gzipped blob):H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+gdilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9iPNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1wywAAAAAAAADwu14ATsEYtgBQAAA=$ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt$ dd if=/mnt/data of=/dev/null bs=4096 count=1
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix conn-level packet handling to unshare RESPONSE packetsThe security operations that verify the RESPONSE packets decrypt bits of itin place - however, the sk_buff may be shared with a packet sniffer, whichwould lead to the sniffer seeing an apparently corrupt packet (actuallydecrypted).Fix this by handing a copy of the packet off to the specific securityhandler if the packet was cloned.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: ns: Limit the total number of nodesCurrently, the nameserver doesn't limit the number of nodes it handles.This can be an attack vector if a malicious client starts registeringrandom nodes, leading to memory exhaustion.Hence, limit the maximum number of nodes to 64. Note that, limit of 64 ischosen based on the current platform requirements. If requirement changesin the future, this limit can be increased.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: fix a resource leak in xfs_alloc_buftarg()In the error path, call fs_put_dax() to drop the DAXdevice reference.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/nouveau: fix u32 overflow in pushbuf reloc bounds checknouveau_gem_pushbuf_reloc_apply() validates each relocation with if (r->reloc_bo_offset + 4 > nvbo->bo.base.size)but reloc_bo_offset is __u32 (uapi/drm/nouveau_drm.h) and the integerliteral 4 promotes to unsigned int, so the addition is performed in 32bits and wraps before the comparison against the size_t bo size.Cast to u64 so the addition happens in 64-bit arithmetic.[ Add Fixes: tag. - Danilo ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardownepf_ntb_epc_destroy() duplicates the teardown that the caller issupposed to do later. This leads to an oops when .allow_link fails orwhen .drop_link is performed. Remove the helper.Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPCgroup lifetime, and pci_epc_put() in the .drop_link path is sufficient.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: mtk-jpeg: fix use-after-free in release path due to uncancelled workThe mtk_jpeg_release() function frees the context structure (ctx) withoutfirst cancelling any pending or running work in ctx->jpeg_work. Thiscreates a race window where the workqueue callback may still be accessingthe context memory after it has been freed.Race condition: CPU 0 (release) CPU 1 (workqueue) ---------------- ------------------ close() mtk_jpeg_release() mtk_jpegenc_worker() ctx = work->data // accessing ctx kfree(ctx) // freed! access ctx // UAF!The work is queued via queue_work() during JPEG encode/decode operations(via mtk_jpeg_device_run). If the device is closed while work is pendingor running, the work handler will access freed memory.Fix this by calling cancel_work_sync() BEFORE acquiring the mutex. Thisordering is critical: if cancel_work_sync() is called after mutex_lock(),and the work handler also tries to acquire the same mutex, it would causea deadlock.Note: The open error path does NOT need cancel_work_sync() becauseINIT_WORK() only initializes the work structure - it does not scheduleit. Work is only scheduled later during ioctl operations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: call sk_data_ready() after listener migrationWhen inet_csk_listen_stop() migrates an established child socket froma closing listener to another socket in the same SO_REUSEPORT group,the target listener gets a new accept-queue entry viainet_csk_reqsk_queue_add(), but that path never notifies the targetlistener's waiters. A nonblocking accept() still works because itchecks the queue directly, but poll()/epoll_wait() waiters andblocking accept() callers can also remain asleep indefinitely.Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migrationin inet_csk_listen_stop().However, after inet_csk_reqsk_queue_add() succeeds, the ref acquiredin reuseport_migrate_sock() is effectively transferred tonreq->rsk_listener. Another CPU can then dequeue nreq via accept()or listener shutdown, hit reqsk_put(), and drop that listener ref.Since listeners are SOCK_RCU_FREE, wrap the post-queue_add()dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which alsocovers the existing sock_net(nsk) access in that path.The reqsk_timer_handler() path does not need the same changes for tworeasons: half-open requests become readable only after the final ACK,where tcp_child_process() already wakes the listener; and once nreq isvisible via inet_ehash_insert(), the success path no longer touchesnsk directly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:remoteproc: xlnx: Only access buffer information if IPI is bufferedIn the receive callback check if message is NULL to preventpossibility of crash by NULL pointer dereferencing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATESparse_uac2_sample_rate_range() caps the number of enumeratedrates at MAX_NR_RATES, but it only breaks out of the currentrate loop. A malformed UAC2 RANGE response with additionaltriplets continues parsing the remaining triplets and repeatedlyprints "invalid uac2 rates" while probe still holdsregister_mutex.Stop the whole parse once the cap is reached and return thenumber of rates collected so far.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanupatmel_aes_buff_init() allocates 4 pages using __get_free_pages() withATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only thefirst page using free_page(), leaking the remaining 3 pages. Usefree_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO readwhen the queue reader or writer index from hardware exceedsREMOTE_QUEUE_SIZE (60).A compromised service processor can trigger this by writing anout-of-range value to the reader or writer MMIO register beforeasserting an interrupt. Since writer is re-read from hardware onevery loop iteration, it can also be set to an out-of-range valueafter the loop has already started.The root cause is that get_queue_reader() and get_queue_writer() returnraw readl() values that are passed directly into get_queue_entry(),which computes: queue_begin + reader * sizeof(struct remote_input)with no bounds check. This unchecked MMIO address is then passed tomemcpy_fromio(), reading 8 bytes from unintended device registers.For sufficiently large values the address falls outside the PCI BARmapping entirely, triggering a machine check exception.Fix by checking both indices against REMOTE_QUEUE_SIZE at the top ofthe loop body, before any call to get_queue_entry(). On an out-of-rangevalue, reset the reader register to 0 via set_queue_reader() beforebreaking, so that normal queue operation can resume if the corruptedhardware state is transient.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: ns: Limit the maximum number of lookupsCurrent code does no bound checking on the number of lookups a client canperform. Though the code restricts the lookups to local clients, there isstill a possibility of a malicious local client sending a flood ofNEW_LOOKUP messages over the same socket.Fix this issue by limiting the maximum number of lookups to 64 globally.Since the nameserver allows only atmost one local observer, this globallookup count will ensure that the lookups stay within the limit.Note that, limit of 64 is chosen based on the current platformrequirements. If requirement changes in the future, this limit can beincreased.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: avoid early lgr access in smc_clc_wait_msgA CLC decline can be received while the handshake is still in an earlystage, before the connection has been associated with a link group.The decline handling in smc_clc_wait_msg() updates link-group level syncstate for first-contact declines, but that state only exists after linkgroup setup has completed. Guard the link-group update accordingly andkeep the per-socket peer diagnosis handling unchanged.This preserves the existing sync_err handling for established link-groupcontexts and avoids touching link-group state before it is available.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: algif_aead - snapshot IV for async AEAD requestsAF_ALG AEAD AIO requests currently use the socket-wide IV buffer duringrequest processing. For async requests, later socket activity canupdate that shared state before the original request has fullycompleted, which can lead to inconsistent IV handling.Snapshot the IV into per-request storage when preparing the AEADrequest, so in-flight operations no longer depend on mutable socketstate.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXITIf loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit()returns an error code that is ignored by most callers, and continues torun L1 with corrupted state. A sane recovery is not possible in thiscase, and HW behavior is to cause a shutdown. Inject a triple faultinstead, and do not return early from nested_svm_vmexit(). Continuecleaning up the vCPU state (e.g. clear pending exceptions), to handlethe failure as gracefully as possible.From the APM: Upon #VMEXIT, the processor performs the following actions in order to return to the host execution context: ... if (illegal host state loaded, or exception while loading host state) shutdown else execute first host instruction following the VMRUNRemove the return value of nested_svm_vmexit(), which is mostlyunchecked anyway.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: authencesn - reject short ahash digests during instance creationauthencesn requires either a zero authsize or an authsize of at least4 bytes because the ESN encrypt/decrypt paths always move 4 bytes ofhigh-order sequence number data at the end of the authenticated data.While crypto_authenc_esn_setauthsize() already rejects explicitnon-zero authsizes in the range 1..3, crypto_authenc_esn_create()still copied auth->digestsize into inst->alg.maxauthsize withoutvalidating it. The AEAD core then initialized the tfm's defaultauthsize from that value.As a result, selecting an ahash with digest size 1..3, such ascbcmac(cipher_null), exposed authencesn instances whose defaultauthsize was invalid even though setauthsize() would have rejected thesame value. AF_ALG could then trigger the ESN tail handling with atoo-short tag and hit an out-of-bounds access.Reject authencesn instances whose ahash digest size is in the invalidnon-zero range 1..3 so that no tfm can inherit an unsupported defaultauthsize.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: ns: Free the node during ctrl_cmd_bye()A node sends the BYE packet when it is about to go down. So the nameservershould advertise the removal of the node to all remote and local observersand free the node finally. But currently, the nameserver doesn't free thenode memory even after processing the BYE packet. This causes the nodememory to leak.Hence, remove the node from Xarray list and free the node memory duringboth success and failure case of ctrl_cmd_bye().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:inotify: fix watch count leak when fsnotify_add_inode_mark_locked() failsWhen fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),the error path calls inotify_remove_from_idr() but does not calldec_inotify_watches() to undo the preceding inc_inotify_watches().This leaks a watch count, and repeated failures can exhaust themax_user_watches limit with -ENOSPC even when no watches are active.Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespacelimits"), the watch count was incremented after fsnotify_add_mark_locked()succeeded, so this path was not affected. The conversion movedinc_inotify_watches() before the mark insertion without adding thecorresponding rollback.Add the missing dec_inotify_watches() call in the error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi:ssif: Clean up kthread on errorsIf an error occurs after the ssif kthread is created, but before themain IPMI code starts the ssif interface, the ssif kthread will notbe stopped.So make sure the kthread is stopped on an error condition if it isrunning.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all()The commit c8e008b60492 ("ext4: ignore xattrs past end")introduced a refcount leak in when block_csum is false.ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() toget iloc.bh, but never releases it with brelse().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: ctxfi: Add fallback to default RSR for S/PDIFspdif_passthru_playback_get_resources() uses atc->pll_rate as the RSRfor the MSR calculation loop. However, pll_rate is only updated inatc_pll_init() and not in hw_pll_init(), so it remains 0 after thecard init.When spdif_passthru_playback_setup() skips atc_pll_init() for32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spinindefinitely.Add fallback to use atc->rsr when atc->pll_rate is 0. This reflectsthe hardware state, since hw_card_init() already configures the PLLto the default RSR.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid10: fix deadlock with check operation and nowait requestsWhen an array check is running it will raise the barrier at which pointnormal requests will become blocked and increment the nr_pending value tosignal there is work pending inside of wait_barrier(). NOWAIT requestsdo not block and so will return immediately with an error, and additionallydo not increment nr_pending in wait_barrier(). Upstream change commit43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added acall to raid_end_bio_io() to fix a memory leak when NOWAIT requests hitthis condition. raid_end_bio_io() eventually calls allow_barrier() andit will unconditionally do an atomic_dec_and_test(&conf->nr_pending) eventhough the corresponding increment on nr_pending didn't happen in theNOWAIT case.This can be easily seen by starting a check operation while an applicationis doing nowait IO on the same array. This results in a deadlocked statedue to nr_pending value underflowing and so the md resync thread gets stuckwaiting for nr_pending to == 0.Output of r10conf state of the array when we hit this condition:crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0,Example of md_sync thread stuck waiting on raise_barrier() and otherrequests stuck in wait_barrier():md1_resync[<0>] raise_barrier+0xce/0x1c0[<0>] raid10_sync_request+0x1ca/0x1ed0[<0>] md_do_sync+0x779/0x1110[<0>] md_thread+0x90/0x160[<0>] kthread+0xbe/0xf0[<0>] ret_from_fork+0x34/0x50[<0>] ret_from_fork_asm+0x1a/0x30kworker/u1040:2+flush-253:4[<0>] wait_barrier+0x1de/0x220[<0>] regular_request_wait+0x30/0x180[<0>] raid10_make_request+0x261/0x1000[<0>] md_handle_request+0x13b/0x230[<0>] __submit_bio+0x107/0x1f0[<0>] submit_bio_noacct_nocheck+0x16f/0x390[<0>] ext4_io_submit+0x24/0x40[<0>] ext4_do_writepages+0x254/0xc80[<0>] ext4_writepages+0x84/0x120[<0>] do_writepages+0x7a/0x260[<0>] __writeback_single_inode+0x3d/0x300[<0>] writeback_sb_inodes+0x1dd/0x470[<0>] __writeback_inodes_wb+0x4c/0xe0[<0>] wb_writeback+0x18b/0x2d0[<0>] wb_workfn+0x2a1/0x400[<0>] process_one_work+0x149/0x330[<0>] worker_thread+0x2d2/0x410[<0>] kthread+0xbe/0xf0[<0>] ret_from_fork+0x34/0x50[<0>] ret_from_fork_asm+0x1a/0x30
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid5: fix soft lockup in retry_aligned_read()When retry_aligned_read() encounters an overlapped stripe, it releasesthe stripe via raid5_release_stripe() which puts it on the locklessreleased_stripes llist. In the next raid5d loop iteration,release_stripe_list() drains the stripe onto handle_list (sinceSTRIPE_HANDLE is set by the original IO), but retry_aligned_read()runs before handle_active_stripes() and removes the stripe fromhandle_list via find_get_stripe() -> list_del_init(). This preventshandle_stripe() from ever processing the stripe to resolve theoverlap, causing an infinite loop and soft lockup.Fix this by using __release_stripe() with temp_inactive_list insteadof raid5_release_stripe() in the failure path, so the stripe does notgo through the released_stripes llist. This allows raid5d to break outof its loop, and the overlap will be resolved when the stripe iseventually processed by handle_stripe().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: rds: fix MR cleanup on copy error__rds_rdma_map() hands sg/pages ownership to the transport afterget_mr() succeeds. If copying the generated cookie back to user spacefails after that point, the error path must not free those resourcesagain before dropping the MR reference.Remove the duplicate unpin/free from the put_user() failure branch sothat MR teardown is handled only through the existing final cleanuppath.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:selinux: fix overlayfs mmap() and mprotect() access checksThe existing SELinux security model for overlayfs is to allow access ifthe current task is able to access the top level file (the "user" file)and the mounter's credentials are sufficient to access the lowerlevel file (the "backing" file). Unfortunately, the current code doesnot properly enforce these access controls for both mmap() and mprotect()operations on overlayfs filesystems.This patch makes use of the newly created security_mmap_backing_file()LSM hook to provide the missing backing file enforcement for mmap()operations, and leverages the backing file API and new LSM blob toprovide the necessary information to properly enforce the mprotect()access controls.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_event: fix potential UAF in SSP passkey handlershci_conn lookup and field access must be covered by hdev lock inhci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwisethe connection can be freed concurrently.Extend the hci_dev_lock critical section to cover all conn usage in bothhandlers.Keep the existing keypress notification behavior unchanged by routingthe early exits through a common unlock path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: amphion: Fix race between m2m job_abort and device_runFix kernel panic caused by race condition where v4l2_m2m_ctx_release()frees m2m_ctx while v4l2_m2m_try_run() is about to call device_runwith the same context.Race sequence: v4l2_m2m_try_run(): v4l2_m2m_ctx_release(): lock/unlock v4l2_m2m_cancel_job() job_abort() v4l2_m2m_job_finish() kfree(m2m_ctx) <- frees ctx device_run() <- use-after-free crash at 0x538Crash trace: Unable to handle kernel read from unreadable memory at virtual address 0000000000000538 v4l2_m2m_try_run+0x78/0x138 v4l2_m2m_device_run_work+0x14/0x20The amphion vpu driver does not rely on the m2m framework's device_runcallback to perform encode/decode operations.Fix the race by preventing m2m framework job scheduling entirely:- Add job_ready callback returning 0 (no jobs ready for m2m framework)- Remove job_abort callback to avoid the race condition
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUNFor guests with NRIPS disabled, L1 does not provide NextRIP when runningan L2 with an injected soft interrupt, instead it advances the current RIPbefore running it. KVM uses the current RIP as the NextRIP in vmcb02 toemulate a CPU without NRIPS.However, after L2 runs the first time, NextRIP will be updated by the CPUand/or KVM, and the current RIP is no longer the correct value to use invmcb02. Hence, after save/restore, use the current RIP if and only if anested run is pending, otherwise use NextRIP. Give soft_int_next_rip thesame treatment, as it's the same logic, just for a narrower use case.[sean: give soft_int_next_rip the same treatment]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ibmasm: fix heap over-read in ibmasm_send_i2o_message()The ibmasm_send_i2o_message() function uses get_dot_command_size() tocompute the byte count for memcpy_toio(), but this value is derived fromuser-controlled fields in the dot_command_header (command_size: u8,data_size: u16) and is never validated against the actual allocation size.A root user can write a small buffer with inflated header fields, causingmemcpy_toio() to read up to ~65 KB past the end of the allocation intoadjacent kernel heap, which is then forwarded to the service processorover MMIO.Silently clamping the copy size is not sufficient: if the header fieldsclaim a larger size than the buffer, the SP receives a dot command whoseown header is inconsistent with the I2O message length, which can causethe SP to desynchronize. Reject such commands outright by returningfailure.Validate command_size before calling get_mfa_inbound() to avoid leakingan I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardwareframe from the controller's free pool, and returning without acorresponding set_mfa_inbound() call would permanently exhaust it.Additionally, clamp command_size to I2O_COMMAND_SIZE before thememcpy_toio() so the MMIO write stays within the I2O message frame,consistent with the clamping already performed by outgoing_message_size()for the header field.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_infoHold state of deferred I/O in struct fb_deferred_io_state. Allocate aninstance as part of initializing deferred I/O and remove it only afterthe final mapping has been closed. If the fb_info and the containeddeferred I/O meanwhile goes away, clear struct fb_deferred_io_state.infoto invalidate the mapping. Any access will then result in a SIGBUSsignal.Fixes a long-standing problem, where a device hot-unplug happens whileuser space still has an active mapping of the graphics memory. The hot-unplug frees the instance of struct fb_info. Accessing the memory willoperate on undefined state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix num_ops off-by-one when crypto allocation failsmove_dirty_folio_in_page_array() may fail if the file is encrypted, thedirty folio is not the first in the batch, and it fails to allocate abounce buffer to hold the ciphertext. When that happens,ceph_process_folio_batch() simply redirties the folio and flushes thecurrent batch -- it can retry that folio in a future batch.However, if this failed folio is not contiguous with the last folio thatdid make it into the batch, then ceph_process_folio_batch() has alreadyincremented `ceph_wbc->num_ops`; because it doesn't follow through andadd the discontiguous folio to the array, ceph_submit_write() -- whichexpects that `ceph_wbc->num_ops` accurately reflects the number ofcontiguous ranges (and therefore the required number of "write extent"ops) in the writeback -- will panic the kernel: BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops);This issue can be reproduced on affected kernels by writing tofscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeatpattern (total filesize should not matter) and gradually increasing thesystem's memory pressure until a bounce buffer allocation fails.Fix this crash by decrementing `ceph_wbc->num_ops` back to the correctvalue when move_dirty_folio_in_page_array() fails, but the folio alreadystarted counting a new (i.e. still-empty) extent.The defect corrected by this patch has existed since 2022 (see first`Fixes:`), but another bug blocked multi-folio encrypted writeback untilrecently (see second `Fixes:`). The second commit made it into 6.18.16,6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patchtherefore fixes a regression (panic) introduced by cac190c7674f.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()The mwifiex_adapter_cleanup() function uses timer_delete()(non-synchronous) for the wakeup_timer before the adapter structure isfreed. This is incorrect because timer_delete() does not wait for anyrunning timer callback to complete.If the wakeup_timer callback (wakeup_timer_fn) is executing whenmwifiex_adapter_cleanup() is called, the callback will continue toaccess adapter fields (adapter->hw_status, adapter->if_ops.card_reset,etc.) which may be freed by mwifiex_free_adapter() called later in themwifiex_remove_card() path.Use timer_delete_sync() instead to ensure any running timer callback hascompleted before returning.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ntfs3: add buffer boundary checks to run_unpack()run_unpack() checks `run_buf < run_last` at the top of the while loopbut then reads size_size and offset_size bytes via run_unpack_s64()without verifying they fit within the remaining buffer. A crafted NTFSimage with truncated run data in an MFT attribute triggers an OOB heapread of up to 15 bytes when the filesystem is mounted.Add boundary checks before each run_unpack_s64() call to ensure thedeclared field size does not exceed the remaining buffer.Found by fuzzing with a source-patched harness (LibAFL + QEMU).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: atmel-tdes - fix DMA sync directionBefore DMA output is consumed by the CPU, ->dma_addr_out must be syncedwith dma_sync_single_for_cpu() instead of dma_sync_single_for_device().Using the wrong direction can return stale cache data on non-coherentplatforms.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: fix the out-of-bounds nameoff handling for trailing direntsCurrently we already have boundary-checks for nameoffs, but the trailingdirents are special since the namelens are calculated with strnlen()with unchecked nameoffs.If a crafted EROFS has a trailing dirent with nameoff >= maxsize,maxsize - nameoff can underflow, causing strnlen() to read past thedirectory block.nameoff0 should also be verified to be a multiple of`sizeof(struct erofs_dirent)` as well [1].[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rbd: fix null-ptr-deref when device_add_disk() failsdo_rbd_add() publishes the device with device_add() before callingdevice_add_disk(). If device_add_disk() fails after device_add()succeeds, the error path calls rbd_free_disk() directly and then laterfalls through to rbd_dev_device_release(), which calls rbd_free_disk()again. This double teardown can leave blk-mq cleanup operating oninvalid state and trigger a null-ptr-deref in__blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set().Fix this by following the normal remove ordering: call device_del()before rbd_dev_device_release() when device_add_disk() fails afterdevice_add(). That keeps the teardown sequence consistent and avoidsre-entering disk cleanup through the wrong path.The bug was first flagged by an experimental analysis tool we aredeveloping for kernel memory-management bugs while analyzingv6.13-rc1. The tool is still under development and is not yet publiclyavailable.We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducerconfines failslab injections to the __add_disk() range and injectsfail-nth while mapping an RBD image through/sys/bus/rbd/add_single_major.On the unpatched kernel, fail-nth=4 reliably triggered the fault: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240 Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00 RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246 RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4 RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004 FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0 PKRU: 55555554 Call Trace: blk_mq_free_tag_set+0x77/0x460 do_rbd_add+0x1446/0x2b80 ? __pfx_do_rbd_add+0x10/0x10 ? lock_acquire+0x18c/0x300 ? find_held_lock+0x2b/0x80 ? sysfs_file_kobj+0xb6/0x1b0 ? __pfx_sysfs_kf_write+0x10/0x10 kernfs_fop_write_iter+0x2f4/0x4a0 vfs_write+0x98e/0x1000 ? expand_files+0x51f/0x850 ? __pfx_vfs_write+0x10/0x10 ksys_write+0xf2/0x1d0 ? __pfx_ksys_write+0x10/0x10 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0fbea15907 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907 RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001 RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141 R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058 R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004 With this fix applied, rerunning the reproducer over fail-nth=1..256yields no KASAN reports.[ idryomov: rename err_out_device_del -> err_out_device ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0INVLPGA should cause a #UD when EFER.SVME is not set. Add a check toproperly inject #UD when EFER.SVME=0.[sean: tag for stable@]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: fix resource leaks on device setup failureMake sure to call controller cleanup() if spi_setup() fails whileregistering a device to avoid leaking any resources allocated bysetup().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()snd_ctl_elem_init_enum_names() advances pointer p through the namesbuffer while decrementing buf_len. If buf_len reaches zero but itemsremain, the next iteration calls strnlen(p, 0).While strnlen(p, 0) returns 0 and would hit the existing name_len == 0error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checksmaxlen against __builtin_dynamic_object_size(). When Clang loses trackof p's object size inside the loop, this triggers a BRK exception panicbefore the return value is examined.Add a buf_len == 0 guard at the loop entry to prevent calling fortifiedstrnlen() on an exhausted buffer.Found by kernel fuzz testing through Xiaomi Smartphone.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:zram: do not forget to endio for partial discard requestsAs reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0takes literally forever to complete. zram doesn't support partialdiscards and just returns immediately w/o doing any discard work in suchcases. The problem is that we forget to endio on our way out, soblkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping toend_bio label, which does bio_endio().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw88: check for PCI upstream bridge existencepci_upstream_bridge() returns NULL if the device is on a root bus. If8821CE is installed in the system with such a PCI topology, the probingroutine will crash. This has probably been unnoticed as 8821CE is mostlysupplied in laptops where there is a PCI-to-PCI bridge located upstreamfrom the device. However the card might be installed on a system withdifferent configuration.Check if the bridge does exist for the specific workaround to be applied.Found by Linux Verification Center (linuxtesting.org) with Svace staticanalysis tool.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnelsseg6_input_core() and rpl_input() call ip6_route_input() which sets aNOREF dst on the skb, then pass it to dst_cache_set_ip6() invokingdst_hold() unconditionally.On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task canrelease the underlying pcpu_rt between the lookup and the cachingthrough a concurrent FIB lookup on a shared nexthop.Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-freeFor the race to occur, ksoftirqd must be preemptible (PREEMPT_RT withoutPREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to releasethe pcpu_rt. Shared nexthop objects provide such a path, as two routespointing to the same nhid share the same fib6_nh and its rt6i_pcpuentry.Fix seg6_input_core() and rpl_input() by calling skb_dst_force() afterip6_route_input() to force the NOREF dst into a refcounted one beforecaching.The output path is not affected as ip6_route_output() already returns arefcounted dst.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: strparser: fix skb_head leak in strp_abort_strp()When the stream parser is aborted, for example after a message assembly timeout,it can still hold a reference to a partially assembled message instrp->skb_head.That skb is not released in strp_abort_strp(), which leaks the partiallyassembled message and can be triggered repeatedly to exhaust memory.Fix this by freeing strp->skb_head and resetting the parser state in theabort path. Leave strp_stop() unchanged so final cleanup still happens instrp_done() after the work and timer have been synchronized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: ucan: fix devres lifetimeUSB drivers bind to USB interfaces and any device managed resourcesshould have their lifetime tied to the interface rather than parent USBdevice. This avoids issues like memory leaks when drivers are unboundwithout their devices being physically disconnected (e.g. on probedeferral or configuration changes).Fix the control message buffer lifetime so that it is released on driverunbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:selinux: use sk blob accessor in socket permission helpersSELinux socket state lives in the composite LSM socket blob.sock_has_perm() and nlmsg_sock_has_extended_perms() currentlydereference sk->sk_security directly, which assumes the SELinux socketblob is at offset zero.In stacked configurations that assumption does not hold. If another LSMallocates socket blob storage before SELinux, these helpers may read thewrong blob and feed invalid SID and class values into AVC checks.Use selinux_sock() instead of accessing sk->sk_security directly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi:si: Return state to normal if message allocation failsThere were places where nothing would get started if a messageallocation failed, so the driver needs to return to normal state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:block: add pgmap check to biovec_phys_mergeablebiovec_phys_mergeable() is used by the request merge, DMA mapping,and integrity merge paths to decide if two physically contiguousbvec segments can be coalesced into one. It currently has no checkfor whether the segments belong to different dev_pagemaps.When zone device memory is registered in multiple chunks, each chunkgets its own dev_pagemap. A single bio can legitimately containbvecs from different pgmaps -- iov_iter_extract_bvecs() breaks atpgmap boundaries but the outer loop in bio_iov_iter_get_pages()continues filling the same bio. If such bvecs are physicallycontiguous, biovec_phys_mergeable() will coalesce them, making itimpossible to recover the correct pgmap for the merged segmentvia page_pgmap().Add a zone_device_pages_have_same_pgmap() check to prevent mergingbvec segments that span different pgmaps.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:isofs: validate block number from NFS file handle in isofs_export_igetisofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker-controlled block number (ifid->block or ifid->parent_block) fromthe NFS file handle to isofs_export_iget(), which only rejectsblock == 0 before calling isofs_iget() and ultimately sb_bread().A crafted file handle with fh_len sufficient to pass the checkadded by commit 0405d4b63d08 ("isofs: Prevent the use of too smallfid") can still drive the server to read any in-range block on thebacking device as if it were an iso_directory_record. That earlierfix was assigned CVE-2025-37780.sb_bread() on an out-of-range block returns NULL cleanly via theEIO path, so there is no memory-safety violation. For in-rangereads of adjacent-partition data on the same block device, theunrelated bytes end up in iso_inode_info fields that reach the NFSclient as dentry metadata. The deployment surface (isofs exportedover NFS from loop-mounted images) is narrow and requires anauthenticated NFS peer, but the malformed-file-handle class isreportable as hardening next to the existing CVE-2025-37780 fix.Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() sothe check covers both isofs_fh_to_dentry() and isofs_fh_to_parent()call sites with a single line.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: remove station if connection prep failsIf connection preparation fails for MLO connections, then theinterface is completely reset to non-MLD. In this case, we mustnot keep the station since it's related to the link of the vifbeing removed. Delete an existing station. Any "new_sta" isalready being removed, so that doesn't need changes.This fixes a use-after-free/double-free in debugfs if that'senabled, because a vif going from MLD (and to MLD, but that'snot relevant here) recreates its entire debugfs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()Sashiko points out that pd->uctx isn't initialized until late in thefunction so all these error flow references are NULL and will crash. Usethe uctx that isn't NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi: Check event message buffer response for bad dataThe event message buffer response data size got checked later whenprocessing, but check it right after the response comes back. Itappears some BMCs may return an empty message instead of an errorwhen fetching events.There are apparently some new BMCs that make this error, so we need tocompensate.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm-verity-fec: fix reading parity bytes split across blocks (take 3)fec_decode_bufs() assumes that the parity bytes of the first RS codewordit decodes are never split across parity blocks.This assumption is false. Consider v->fec->block_size == 4096 &&v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, eachcall to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86: check for nEPT/nNPT in slow flush hypercallsChecking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa()is only valid if an L2 guest is running *with nested EPT/NPT enabled*.Instead use the same condition as translate_nested_gpa() itself.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfortnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stackwithout initialisation: struct ifla_vf_broadcast vf_broadcast;The struct contains a single fixed 32-byte field: /* include/uapi/linux/if_link.h */ struct ifla_vf_broadcast { __u8 broadcast[32]; };The function then copies dev->broadcast into it using dev->addr_lenas the length: memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);On Ethernet devices (the overwhelming majority of SR-IOV NICs)dev->addr_len is 6, so only the first 6 bytes of broadcast[] arewritten. The remaining 26 bytes retain whatever was previously onthe kernel stack. The full struct is then handed to userspace via: nla_put(skb, IFLA_VF_BROADCAST, sizeof(vf_broadcast), &vf_broadcast)leaking up to 26 bytes of uninitialised kernel stack per VF perRTM_GETLINK request, repeatable.The other vf_* structs in the same function are explicitly zeroedfor exactly this reason - see the memset() calls for ivi,vf_vlan_info, node_guid and port_guid a few lines above.vf_broadcast was simply missed when it was added.Reachability: any unprivileged local process can open AF_NETLINK /NETLINK_ROUTE without capabilities and send RTM_GETLINK with anIFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walkseach VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack perVF per request. Stack residue at this call site can include returnaddresses and transient sensitive data; KASAN with stackinstrumentation, or KMSAN, will flag the nla_put() when reproduced.Zero the on-stack struct before the partial memcpy, matching theexisting pattern used for the other vf_* structs in the samefunction.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Reject unknown opcodes before ICRC processingEven after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRCbefore payload_size() in rxe_rcv"), a single unauthenticated UDP packetcan still trigger panic. That patch handled payload_size() underflow onlyfor valid opcodes with short packets, not for packets carrying an unknownopcode. The unknown-opcode OOB read described below predates that commitand reaches back to the initial Soft RoCE driver.The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZEwhere header_size(pkt) expands to rxe_opcode[pkt->opcode].length. Therxe_opcode[] array has 256 entries but is only populated for defined IBopcodes; any other entry (for example opcode 0xff) is zero-initialized, solength == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZEwhich does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTESwhich underflows when length == 0 and passes a huge value to rxe_crc32(),causing an out-of-bounds read of the skb payload.Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM withCONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0A single 48-byte UDP packet to port 4791 with BTH opcode=0xff andQPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0Subsequent packets with the same shape fault on unmapped memory and panicthe kernel. The trigger requires only module load and "rdma link add"; noQP, no connection, and no authentication.Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,detected via the zero mask or zero length, before any length arithmeticruns.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: mt7921: fix a potential clc buffer length underflowThe buf_len is used to limit the iterations for retrieving the countrypower setting and may underflow under certain conditions due to changesin the power table in CLC.This underflow leads to an almost infinite loop or an invalid powersetting resulting in driver initialization failure.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()The convert_chmap_v3() has a loop with its increment size ofcs_desc->wLength, but we forgot to validate cs_desc->wLength itself,which may lead to potential endless loop by a malformed descriptor.Add a proper size check to abort the loop for plugging the hole.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: microchip-core-qspi: control built-in cs manuallyThe coreQSPI IP supports only a single chip select, which isautomagically operated by the hardware - set low when the transmitbuffer first gets written to and set high when the number of byteswritten to the TOTALBYTES field of the FRAMES register have been sent onthe bus. Additional devices must use GPIOs for their chip selects.It was reported to me that if there are two devices attached to thisQSPI controller that the in-built chip select is set low while linuxtries to access the device attached to the GPIO.This went undetected as the boards that connected multiple devices tothe SPI controller all exclusively used GPIOs for chip selects, notrelying on the built-in chip select at all. It turns out that this wasbecause the built-in chip select, when controlled automagically, is setlow when active and high when inactive, thereby ruling out its use foractive-high devices or devices that need to transmit with the chipselect disabled.Modify the driver so that it controls chip select directly, retainingthe behaviour for mem_ops of setting the chip select active for theentire duration of the transfer in the exec_op callback. For regulartransfers, implement the set_cs callback for the core to use.As part of this, the existing setup callback, mchp_coreqspi_setup_op(),is removed. Modifying the CLKIDLE field is not safe to do duringoperation when there are multiple devices, so this code is removedentirely. Setting the MASTER and ENABLE fields is something that can bedone once at probe, it doesn't need to be re-run for each device.Instead the new setup callback sets the built-in chip select to itsinactive state for active-low devices, as the reset value of the chipselect in software controlled mode is low.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a256-byte stack buffer, then will memcpy() cur_len bytes from thatbuffer. snprintf() returns the length the output would have had, whichcan exceed the buffer size when the fabric WWN is long because iSCSI IQNnames can be up to 223 bytes. The check at the memcpy() site onlyguards the destination page write, not the source read, so memcpy() willread past the stack buffer and copy adjacent stack contents to the sysfsreader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()will be triggered.Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add lengthcheck to avoid buffer overflow") added the same bound to thetarget_lu_gp_members_show() but the tg_pt_gp variant was missed soresolve that here.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: drop stray 'static' from fast-RX rx_resultieee80211_invoke_fast_rx() is documented as safe for parallel RX, butits per-invocation rx_result is declared static. Concurrent callers thenshare one instance and can overwrite each other's result betweenieee80211_rx_mesh_data() and the switch on res.That can make a packet that was queued or consumed byieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or makea packet that should continue return as queued.Make res an automatic variable so each invocation keeps its own result.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: pm: ADD_ADDR rtx: always decrease sk refcountWhen an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().It should then be released in all cases at the end.Some (unlikely) checks were returning directly instead of callingsock_put() to decrease the refcount. Jump to a new 'exit' label to call__sock_put() (which will become sock_put() in the next commit) to fixthis potential leak.While at it, drop the '!msk' check which cannot happen because it isnever reset, and explicitly mark the remaining one as "unlikely".
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leakbtrfs_ioctl_space_info() has a TOCTOU race between two passes over theblock group RAID type lists. The first pass counts entries to determinethe allocation size, then the second pass fills the buffer. Thegroups_sem rwlock is released between passes, allowing concurrent blockgroup removal to reduce the entry count.When the second pass fills fewer entries than the first pass counted,copy_to_user() copies the full alloc_size bytes including trailinguninitialized kmalloc bytes to userspace.Fix by copying only total_spaces entries (the actually-filled count fromthe second pass) instead of alloc_size bytes, and switch to kzalloc soany future copy size mismatch cannot leak heap data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix missing last_unlink_trans update when removing a directoryWhen removing a directory we are not updating its last_unlink_trans field,which can result in incorrect fsync behaviour in case some one fsyncs thedirectory after it was removed because it's holding a file descriptor onit.Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd When attempting to mount the filesystem, the log replay will fail withan -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (2---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid10: fix divide-by-zero in setup_geo() with zero far_copiessetup_geo() extracts near_copies (nc) and far_copies (fc) from theuser-provided layout parameter without checking for zero. When fc=0with the "improved" far set layout selected, 'geo->far_set_size =disks / fc' triggers a divide-by-zero.Validate nc and fc immediately after extraction, returning -1 ifeither is zero.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: b43legacy: enforce bounds check on firmware key index in RX pathSame fix as b43: the firmware-controlled key index in b43legacy_rx()can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON isnon-enforcing in production builds, allowing an out-of-bounds read ofdev->key[].Make the check enforcing by dropping the frame for invalid indices.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fix scheduling with atomic in timestamp sockoptUsing lock_sock_fast() (atomic context) around sock_set_timestamp()and sock_set_timestamping() is unsafe, as both helpers can sleep.Replace lock_sock_fast() with sleepable lock_sock()/release_sock()to avoid scheduling while atomic panic.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does notalready have a dst attached. ip6_route_input_lookup() returns areferenced dst entry even when the lookup resolves to an error route.If dst->error is set, xfrm6_rcv_encap() drops the skb without attachingthe dst to the skb and without releasing the reference returned by thelookup. Repeated packets hitting this path therefore leak dst entries.Release the dst before jumping to the drop path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: fix fsck inconsistency caused by FGGC of node blockDuring FGGC node block migration, fsck may incorrectly treat themigrated node block as fsync-written data.The reproduction scenario:root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and syncroot@vm:/mnt/f2fs# rm -f 1root@vm:/mnt/f2fs# syncroot@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT setThe root cause is that GC does not clear the dentry mark and fsync markduring node block migration, leading fsck to misinterpret them asuser-issued fsync writes.In BGGC mode, node block migration is handled by f2fs_sync_node_pages(),which guarantees the dentry and fsync marks are cleared before writing.This patch move the set/clear of the fsync|dentry marks into__write_node_folio to make the logic clearer, and ensures thefsync|dentry mark is cleared in FGGC.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. Whenib_create_srq() fails for s1, the error branch destroys s0 but fallsthrough and unconditionally assigns the freed s0 and the ERR_PTR s1 todevr->s0 and devr->s1.This leads to several problems: the lock-free fast path checks"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR viato_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferencesthe ERR_PTR and double-frees s0 on teardown.Fix by adding the same `goto unlock` in the s1 failure path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi: Add limits to event and receive message requestsThe driver would just fetch events and receive messages until theBMC said it was done. To avoid issues with BMCs that never say they aredone, add a limit of 10 fetches at a time.In addition, an si interface has an attn state it can return from thehardware which is supposed to cause a flag fetch to see if the driverneeds to fetch events or message or a few other things. If the attnbit gets stuck, it's a similar problem. So allow messages in betweenflag fetches so the driver itself doesn't get stuck.This is a more general fix than the previous fix for the specific badBMC, but should fix the more general issue of a BMC that won't stopsaying it has data.This has been there from the beginning of the driver. It's not a bugper-se, but it is accounting for bugs in BMCs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()Sashiko points out that mlx4_srq_alloc() was not undone during errorunwind, add the missing call to mlx4_srq_free().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: SOF: Don't allow pointer operations on unconfigured streamsWhen reporting the pointer for a compressed stream we report the currentI/O frame position by dividing the position by the number of channelsmultiplied by the number of container bytes. These values default to 0 andare only configured as part of setting the stream parameters so this allowsa divide by zero to be configured. Validate that they are non zero,returning an error if not
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog taskWatchdog task might end between send_sig() and kthread_stop() calls, whatresults in the use-after-free issue. Fix this by increasing watchdog taskreference count before calling send_sig() and dropping it by switching tokthread_stop_put().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event()Sashiko points out the radix_tree itself is RCU safe, but nothing everfrees the mlx4_srq struct with RCU, and it isn't even accessed within theRCU critical section. It also will crash if an event is delivered beforethe srq object is finished initializing.Use the spinlock since it isn't easy to make RCU work, userefcount_inc_not_zero() to protect against partially initialized objects,and order the refcount_set() to be after the srq is fully initialized.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sound: ua101: fix division by zero at probeAdd a missing sanity check for bNrChannels in detect_usb_format()to prevent a division by zero in playback_urb_complete() andcapture_urb_complete().USB core does not validate class-specific descriptor fields suchas bNrChannels, so drivers must verify them before use. If adevice provides bNrChannels = 0, frame_bytes becomes zero and islater used as a divisor in the URB completion handlers, leadingto a kernel crash.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb/client: fix out-of-bounds read in symlink_data()Since smb2_check_message() returns success without length validation forthe symlink error response, in symlink_data() it is possible foriov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the bufferonly contains the base SMB2 header (64 bytes), accessingerr->ErrorContextCount (at offset 66) or err->ByteCount later insymlink_data() will cause an out-of-bounds read.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: virtio_bt: validate rx pkt_type header lengthvirtbt_rx_handle() reads the leading pkt_type byte from the RX skband forwards the remainder to hci_recv_frame() for everyevent/ACL/SCO/ISO type, without checking that the remaining payloadis at least the fixed HCI header for that type.After the preceding patch bounds the backend-supplied used.len to[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reacheshci_recv_frame() with skb->len already pulled to 0. If the bytehappened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classificationfast-path in hci_dev_classify_pkt_type() dereferenceshci_acl_hdr(skb)->handle whenever the HCI device has an activeCIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes ofuninitialized RX-buffer data. The same hazard exists for everypacket type the driver accepts because none of the switch cases invirtbt_rx_handle() check skb->len against the per-type minimum HCIheader size before handing the frame to the core.After stripping pkt_type, require skb->len to cover the fixedheader size for the selected type (event 2, ACL 4, SCO 3, ISO 4)before calling hci_recv_frame(); drop ratelimited otherwise.Unknown pkt_type values still take the original kfree_skb() defaultpath.Use bt_dev_err_ratelimited() because both the length and pkt_typevalues come from an untrusted backend that can otherwise flood thekernel log.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rsi: fix kthread lifetime race between self-exit and external-stopRSI driver use both self-exit(kthread_complete_and_exit) and external-stop(kthread_stop) when killing a kthread. Generally, kthread_stop() is calledfirst, and in this case, no particular issues occur.However, in rare instances where kthread_complete_and_exit() is calledfirst and then kthread_stop() is called, a UAF occurs because the kthreadobject, which has already exited and been freed, is accessed again.Therefore, to prevent this with minimal modification, you must removekthread_stop() and change the code to wait until the self-exit operationis completed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error pathSashiko points out that pvrdma_uar_free() is already called withinpvrdma_dealloc_ucontext(), so calling it before triggers a double free.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()Sashiko noticed an out-of-bounds read [1].In spi_nor_params_show(), the snor_f_names array is passed tospi_nor_print_flags() using sizeof(snor_f_names).Since snor_f_names is an array of pointers, sizeof() returns the totalnumber of bytes occupied by the pointers (element_count * sizeof(void *))rather than the element count itself. On 64-bit systems, this makes thepassed length 8x larger than intended.Inside spi_nor_print_flags(), the 'names_len' argument is used tobounds-check the 'names' array access. An out-of-bounds read occursif a flag bit is set that exceeds the array's actual element countbut is within the inflated byte-size count.Correct this by using ARRAY_SIZE() to pass the actual number ofstring pointers in the array.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbcon: Avoid OOB font access if console rotation failsClear the font buffer if the reallocation during console rotation failsin fbcon_rotate_font(). The putcs implementations for the rotated bufferwill return early in this case. See [1] for an example.Currently, fbcon_rotate_font() keeps the old buffer, which is too smallfor the rotated font. Printing to the rotated console with a high-enoughcharacter code will overflow the font buffer.v2:- fix typos in commit message
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: validate dacloffset before building DACL pointersparse_sec_desc(), build_sec_desc(), and the chown path inid_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsdbefore proving a DACL header fits inside the returned securitydescriptor.On 32-bit builds a malicious server can return dacloffset nearU32_MAX, wrap the derived DACL pointer below end_of_acl, and then slippast the later pointer-based bounds checks. build_sec_desc() andid_mode_to_cifs_acl() can then dereference DACL fields from the wrappedpointer in the chmod/chown rewrite paths.Validate dacloffset numerically before building any DACL pointer andreuse the same helper at the three DACL entry points.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()invokes the subsystem's ext->regfunc() before attempting to install thenew probe via func_add(). If func_add() then fails (for example, whenallocate_probes() cannot allocate a new probe array under memory pressureand returns -ENOMEM), the function returns the error without calling thematching ext->unregfunc(), leaving the side effects of regfunc() behindwith no installed probe to justify them.For syscall tracepoints this is particularly unpleasant: syscall_regfunc()bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.After a leaked failure, the refcount is stuck at a non-zero value with noconsumer, and every task continues paying the syscall trace entry/exitoverhead until reboot. Other subsystems providing regfunc()/unregfunc()pairs exhibit similarly scoped persistent state.Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in thefunc_add() error path, gated on the same condition used there so theunwind is symmetric with the registration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: fix integer overflow on buff_posFixing an integer overflow present in batadv_iv_ogm_send_to_if. The sizecheck is done using the int type in batadv_iv_ogm_aggr_packet whereas thebuff_pos variable uses the s16 type. This could lead to an out-of-boundread.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msgCheck bounds against the end of the BO whenever we access the msg.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: mpc52xx: fix controller deregistrationMake sure to deregister the controller before disabling and releasingunderlying resources like interrupts and gpios during driver unbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn4: Prevent OOB reads when parsing IBRewrite the IB parsing to use amdgpu_ib_get_value() which handles thebounds checks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: media: atomisp: Disallow all private IOCTLsDisallow all private IOCTLs. These aren't quite as safe as one couldassume of IOCTL handlers; disable them for now. Instead of removing thecode, return in the beginning of the function if cmd is non-zero in orderto keep static checkers happy.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: reject new tp_meter sessions during teardownPrevent tp_meter from starting new sender or receiver sessions aftermesh_state has left BATADV_MESH_ACTIVE.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: stop tp_meter sessions during mesh teardownTP meter sessions remain linked on bat_priv->tp_list after the netlinkrequest has already finished. When the mesh interface is removed,batadv_mesh_free() currently tears down the mesh without first drainingthese sessions.A running sender thread or a late incoming tp_meter packet can then keepprocessing against a mesh instance which is already shutting down.Synchronize tp_meter with the mesh lifetime by stopping all activesessions from batadv_mesh_free() and waiting for sender threads to exitbefore teardown continues.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Add bounds checking to ib_{get,set}_valueThe uvd/vce/vcn code accesses the IB at predefined offsets withoutchecking that the IB is large enough. Check the bounds here. The calleris responsible for making sure it can handle arbitrary return values.Also make the idx a uint32_t to prevent overflows causing the conditionto fail.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emissionsdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertionsthat verify fence writeback addresses are dword-aligned. Theseassertions can be reached from unprivileged userspace via craftedDRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in ascheduler worker thread.Replace both BUG_ON() calls with WARN_ON() to log the condition withoutcrashing the kernel. A misaligned fence address at this point indicatesa driver bug, but crashing the kernel is never the correct response whenthe assertion is reachable from userspace.The CS IOCTL path is the correct place to filter invalid submissions;the ring emission callback is too late to do anything about it.(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: rspi: fix controller deregistrationMake sure to deregister the controller before releasing underlyingresources like DMA during driver unbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: fsl: fix controller deregistrationMake sure to deregister the controller before releasing underlyingresources like DMA during driver unbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msgCheck bounds against the end of the BO whenever we access the msg.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock: fix buffer size clamping orderIn vsock_update_buffer_size(), the buffer size was being clamped to themaximum first, and then to the minimum. If a user sets a minimum buffersize larger than the maximum, the minimum check overrides the maximumcheck, inverting the constraint.This breaks the intended socket memory boundaries by allowing thevsk->buffer_size to grow beyond the configured vsk->buffer_max_size.Fix this by checking the minimum first, and then the maximum. Thisensures the buffer size never exceeds the buffer_max_size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: rc: xbox_remote: heed DMA restrictionsThe buffer for IO must not be part of the device structurebecause that violates the DMA coherency rules.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: stop caching unowned originator pointers in BAT IVBAT IV keeps the last-hop neighbor address in each neigh_node, but somepaths also cache an originator pointer derived from a temporary lookup.That pointer is not owned by the neigh_node and may no longer refer to alive originator entry after purge handling runs.Stop storing the auxiliary originator pointer in the BAT IV neighborstate. When BAT IV needs the neighbor originator data, resolve it fromthe stored neighbor address and drop the reference again after use.[sven: avoid bonding logic for outgoing OGM]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: mpc52xx: fix use-after-free on registration failureMake sure to disable and free the interrupts in case controllerregistration fails to avoid a potential use-after-free and resourceleak.This issue was flagged by Sashiko when reviewing a controllerderegistration fix.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_inner: Fix IPv6 inner_thoff desyncIn nft_inner_parse_l2l3(), when processing inner IPv6 packets,ipv6_find_hdr() correctly computes the transport header offsettraversing all extension headers, but the result is immediatelyoverwritten with nhoff + sizeof(_ip6h) (40 bytes), which onlyaccounts for the IPv6 base header. This creates a desync betweeninner_thoff (wrong - points to extension header start) and l4proto(correct - e.g., IPPROTO_TCP), enabling transport header forgeryand potential firewall bypass. This issue affects stable versionsfrom Linux 6.2.For comparison, the normal (non-inner) IPv6 path correctlypreserves ipv6_find_hdr()'s result. Removing the incorrect overwriteensures that ipv6_find_hdr()'s calculated transport header offset ispreserved, thereby fixing the desynchronization.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Fix dc_link NULL handling in HPD initamdgpu_dm_hpd_init() may see connectors without a valid dc_link.The code already checks dc_link for the polling decision, but laterunconditionally dereferences it when setting up HPD interrupts.Assign dc_link early and skip connectors where it is NULL.Fixes the below:drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init()error: we previously assumed 'dc_link' could be null (see line 931)drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link;dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */--> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:clk: qcom: gfx3d: add parent to parent request mapAfter commit d228ece36345 ("clk: divider: remove round_rate() in favorof determine_rate()") determining GFX3D clock rate crashes, because thepassed parent map doesn't provide the expected best_parent_hw clock(with the roundd_rate path before the offending commit thebest_parent_hw was ignored).Set the field in parent_req in addition to setting it in the req,fixing the crash. clk_hw_round_rate (drivers/clk/clk.c:1764) (P) clk_divider_bestdiv (drivers/clk/clk-divider.c:336) divider_determine_rate (drivers/clk/clk-divider.c:358) clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) __clk_determine_rate (drivers/clk/clk.c:1741) clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268) clk_core_determine_round_nolock (drivers/clk/clk.c:1606) clk_core_round_rate_nolock (drivers/clk/clk.c:1701) clk_core_round_rate_nolock (drivers/clk/clk.c:1710) clk_round_rate (drivers/clk/clk.c:1804) dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1)) msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51) devfreq_set_target (drivers/devfreq/devfreq.c:360) devfreq_update_target (drivers/devfreq/devfreq.c:426) devfreq_monitor (drivers/devfreq/devfreq.c:458) process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284) worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2)) kthread (kernel/kthread.c:467) ret_from_fork (arch/arm64/kernel/entry.S:861)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-af: Fix PF driver crash with kexec kernel bootingDuring a kexec reboot the hardware is not power-cycled, so AF state fromthe old kernel can persist into the new kernel. When AF and PF driversare built as modules, the PF driver may probe before AF reinitializesthe hardware.The PF driver treats the RVUM block revision as an indication that AFinitialization is complete. If this value is left uncleared at shutdown,PF may incorrectly assume AF is ready and access stale hardware state,leading to a crash.Clear the RVUM block revision during AF shutdown to avoid PFmis-detecting AF readiness after kexec.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix block_group_tree dirty_list corruptionWhen the incompat flag EXTENT_TREE_V2 is set, we unconditionally add theblock group tree to the switch_commits list before callingswitch_commit_roots, as we do for the tree root and the chunk root.However, the block group tree uses normal root dirty tracking and in anytransaction that does an allocation and dirties a block group, the blockgroup root will already be linked to a list by the dirty_list field andthis use of list_add_tail() is invalid and corrupts the prev/nextmembers of block_group_root->dirty_list.This is apparent on a subsequent list_del on the prev if we enableCONFIG_DEBUG_LIST: [32.1571] ------------[ cut here ]------------ [32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538) [32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607 [32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none) [32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014 [32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120 [32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202 [32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538 [32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00 [32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff [32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538 [32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538 [32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000 [32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0 [32.1609] Call Trace: [32.1610] [32.1611] switch_commit_roots+0x82/0x1d0 [btrfs] [32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs] [32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs] [32.1621] __iterate_supers+0xe8/0x190 [32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10 [32.1623] ksys_sync+0x63/0xb0 [32.1624] __do_sys_sync+0xe/0x20 [32.1625] do_syscall_64+0x73/0x450 [32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e [32.1627] RIP: 0033:0x7f0c28d05d2b [32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2 [32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b [32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d [32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000 [32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80 [32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034 [32.1643] [32.1644] irq event stamp: 0 [32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [32.1646] hardirqs last disabled at (0): []copy_process+0xb37/0x2260 [32.1648] softirqs last enabled at (0): []copy_process+0xb37/0x2260 [32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0 [32.1652] ---[ end trace 0000000000000000 ]---Furthermore, this list corruption eventually (when we happen to add anew block group) results in getting the switch_commits anddirty_cowonly_roots lists mixed up and attempting to call update_rooton the tree root which can't be found in the tree root, resulting in atransaction abort: [87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1 [87.8272] ------------[ cut here ]------------ [87.8274] BTRFS: Transaction aborted (error -117) [87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703 [87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none) [87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 0---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:regulator: core: fix locking in regulator_resolve_supply() error pathIf late enabling of a supply regulator fails inregulator_resolve_supply(), the code currently triggers a lockdepwarning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8as the regulator_list_mutex must be held when calling _regulator_put().To solve this, simply switch to using regulator_put().While at it, we should also make sure that no concurrent access happensto our rdev while we clear out the supply pointer. Add appropriatelocking to ensure that.While the code in question will be removed altogether in a follow-upcommit, I believe it is still beneficial to have this corrected beforeremoval for future reference.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pstore/ram: fix buffer overflow in persistent_ram_save_old()persistent_ram_save_old() can be called multiple times for the samepersistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_przfor PSTORE_TYPE_DMESG records).Currently, the function only allocates prz->old_log when it is NULL,but it unconditionally updates prz->old_log_size to the current buffersize and then performs memcpy_fromio() using this new size. If thebuffer size has grown since the first allocation (which can happenacross different kernel boot cycles), this leads to:1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer using the incorrect (larger) old_log_sizeThe KASAN splat would look similar to: BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x... Read of size N at addr ... by task ...The conditions are likely extremely hard to hit: 0. Crash with a ramoops write of less-than-record-max-size bytes. 1. Reboot: ramoops registers, pstore_get_records(0) reads old crash, allocates old_log with size X 2. Crash handler registered, timer started (if pstore_update_ms >= 0) 3. Oops happens (non-fatal, system continues) 4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X) 5. pstore_new_entry = 1, pstore_timer_kick() called 6. System continues running (not a panic oops) 7. Timer fires after pstore_update_ms milliseconds 8. pstore_timefunc() -> schedule_work() -> pstore_dowork() -> pstore_get_records(1) 9. ramoops_get_next_prz() -> persistent_ram_save_old() 10. buffer_size() returns Y, but old_log is X bytes 11. Y > X: memcpy_fromio() overflows heap Requirements: - a prior crash record exists that did not fill the record size (almost impossible since the crash handler writes as much as it can possibly fit into the record, capped by max record size and the kmsg buffer almost always exceeds the max record size) - pstore_update_ms >= 0 (disabled by default) - Non-fatal oops (system survives)Free and reallocate the buffer when the new size differs from thepreviously allocated size. This ensures old_log always has sufficientspace for the data being copied.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:AppArmor: Allow apparmor to handle unaligned dfa tablesThe dfa tables can originate from kernel or userspace and 8-byte alignmentisn't always guaranteed and as such may trigger unaligned memory accesseson various architectures. Resulting in the following[ 73.901376] WARNING: CPU: 0 PID: 341 at security/apparmor/match.c:316 aa_dfa_unpack+0x6cc/0x720[ 74.015867] Modules linked in: binfmt_misc evdev flash sg drm drm_panel_orientation_quirks backlight i2c_core configfs nfnetlink autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid sr_mod hid cdromsd_mod ata_generic ohci_pci ehci_pci ehci_hcd ohci_hcd pata_ali libata sym53c8xx scsi_transport_spi tg3 scsi_mod usbcore libphy scsi_common mdio_bus usb_common[ 74.428977] CPU: 0 UID: 0 PID: 341 Comm: apparmor_parser Not tainted 6.18.0-rc6+ #9 NONE[ 74.536543] Call Trace:[ 74.568561] [<0000000000434c24>] dump_stack+0x8/0x18[ 74.633757] [<0000000000476438>] __warn+0xd8/0x100[ 74.696664] [<00000000004296d4>] warn_slowpath_fmt+0x34/0x74[ 74.771006] [<00000000008db28c>] aa_dfa_unpack+0x6cc/0x720[ 74.843062] [<00000000008e643c>] unpack_pdb+0xbc/0x7e0[ 74.910545] [<00000000008e7740>] unpack_profile+0xbe0/0x1300[ 74.984888] [<00000000008e82e0>] aa_unpack+0xe0/0x6a0[ 75.051226] [<00000000008e3ec4>] aa_replace_profiles+0x64/0x1160[ 75.130144] [<00000000008d4d90>] policy_update+0xf0/0x280[ 75.201057] [<00000000008d4fc8>] profile_replace+0xa8/0x100[ 75.274258] [<0000000000766bd0>] vfs_write+0x90/0x420[ 75.340594] [<00000000007670cc>] ksys_write+0x4c/0xe0[ 75.406932] [<0000000000767174>] sys_write+0x14/0x40[ 75.472126] [<0000000000406174>] linux_sparc_syscall+0x34/0x44[ 75.548802] ---[ end trace 0000000000000000 ]---[ 75.609503] dfa blob stream 0xfff0000008926b96 not aligned.[ 75.682695] Kernel unaligned access at TPC[8db2a8] aa_dfa_unpack+0x6e8/0x720Work around it by using the get_unaligned_xx() helpers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:procfs: fix missing RCU protection when reading real_parent in do_task_stat()When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parentwithout proper RCU protection, which leads to: cpu 0 cpu 1 ----- ----- do_task_stat var = task->real_parent release_task call_rcu(delayed_put_task_struct) task_tgid_nr_ns(var) rcu_read_lock <--- Too late to protect task->real_parent! task_pid_ptr <--- UAF! rcu_read_unlockThis patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to addproper RCU protection for accessing task->real_parent.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: wpcm-fiu: Fix potential NULL pointer dereference in wpcm_fiu_probe()platform_get_resource_byname() can return NULL, which would cause a crashwhen passed the pointer to resource_size().Move the fiu->memory_size assignment after the error check fordevm_ioremap_resource() to prevent the potential NULL pointer dereference.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/hns: Fix WQ_MEM_RECLAIM warningWhen sunrpc is used, if a reset triggered, our wq may lead thefollowing trace:workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle[hns_roce_hw_v2]WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144Call trace: check_flush_dependency+0xe0/0x144 start_flush_work.constprop.0+0x1d0/0x2f0 __flush_work.isra.0+0x40/0xb0 flush_work+0x14/0x30 hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2] ib_destroy_qp_user+0x9c/0x2b4 rdma_destroy_qp+0x34/0xb0 rpcrdma_ep_destroy+0x28/0xcc [rpcrdma] rpcrdma_ep_put+0x74/0xb4 [rpcrdma] rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma] xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: hci: shdlc: Stop timers and work before freeing contextllc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlcstructure while its timers and state machine work may still be active.Timer callbacks can schedule sm_work, and sm_work accesses SHDLC stateand the skb queues. If teardown happens in parallel with a queued/runningwork item, it can lead to UAF and other shutdown races.Stop all SHDLC timers and cancel sm_work synchronously before purging thequeues and freeing the context.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: rt9455: Fix use-after-free in power_supply_changed()Using the `devm_` variant for requesting IRQ _before_ the `devm_`variant for allocating/registering the `power_supply` handle, means thatthe `power_supply` handle will be deallocated/unregistered _before_ theinterrupt handler (since `devm_` naturally deallocates in reverseallocation order). This means that during removal, there is a racecondition where an interrupt can fire just _after_ the `power_supply`handle has been freed, *but* just _before_ the correspondingunregistration of the IRQ handler has run.This will lead to the IRQ handler calling `power_supply_changed()` witha freed `power_supply` handle. Which usually crashes the system orotherwise silently corrupts the memory...Note that there is a similar situation which can also happen during`probe()`; the possibility of an interrupt firing _before_ registeringthe `power_supply` handle. This would then lead to the nasty situationof using the `power_supply` handle *uninitialized* in`power_supply_changed()`.Fix this racy use-after-free by making sure the IRQ is requested _after_the registration of the `power_supply` handle.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ibmveth: Disable GSO for packets with small MSSSome physical adapters on Power systems do not support segmentationoffload when the MSS is less than 224 bytes. Attempting to send suchpackets causes the adapter to freeze, stopping all traffic untilmanually reset.Implement ndo_features_check to disable GSO for packets with small MSSvalues. The network stack will perform software segmentation instead.The 224-byte minimum matches ibmvniccommit ("ibmvnic: Enforce stronger sanity checkson GSO packets")which uses the same physical adapters in SEA configurations.The issue occurs specifically when the hardware attempts to performsegmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets(gso_segs == 1) do not trigger the problematic LSO code path and aretransmitted normally without segmentation.Add an ndo_features_check callback to disable GSO when MSS < 224 bytes.Also call vlan_features_check() to ensure proper handling of VLAN packets,particularly QinQ (802.1ad) configurations where the hardware parser maynot support certain offload features.Validated using iptables to force small MSS values. Without the fix,the adapter freezes. With the fix, packets are segmented in softwareand transmission succeeds. Comprehensive regression testing completedd(MSS tests, performance, stability).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_uart: fix UAFs and race conditions in close and init pathsVulnerabilities leading to Use-After-Free (UAF) and Null PointerDereference (NPD) conditions were observed in the lifecycle managementof hci_uart.The primary issue arises because the workqueues (init_ready andwrite_work) are only flushed/cancelled if the HCI_UART_PROTO_READYflag is set during TTY close. If a hangup occurs before setup completes,hci_uart_tty_close() skips the teardown of these workqueues andproceeds to free the `hu` struct. When the scheduled work executeslater, it blindly dereferences the freed `hu` struct.Furthermore, several data races and UAFs were identified in the teardownsequence:1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work.2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev.3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently.Fix these synchronization and lifecycle issues by:1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free.2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state.3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs.4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration.5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core.6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:lib: test_hmm: evict device pages on file close to avoid use-after-freePatch series "Minor hmm_test fixes and cleanups".Two bugfixes a cleanup for the HMM kernel selftests. These were mostlyreported by Zenghui Yu with special thanks to Lorenzo for analysing andpointing out the problems.This patch (of 3):When dmirror_fops_release() is called it frees the dmirror struct butdoesn't migrate device private pages back to system memory first. Thisleaves those pages with a dangling zone_device_data pointer to the freeddmirror.If a subsequent fault occurs on those pages (eg. during coredump) thedmirror_devmem_fault() callback dereferences the stale pointer causing akernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64,where a test failure triggered SIGABRT and the resulting coredump walkedthe VMAs faulting in the stale device private pages.Fix this by calling dmirror_device_evict_chunk() for each devmem chunk indmirror_fops_release() to migrate all device private pages back to systemmemory before freeing the dmirror struct. The function is moved earlierin the file to avoid a forward declaration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mtd: docg3: fix use-after-free in docg3_release()In docg3_release(), the docg3 pointer is obtained fromcascade->floors[0]->priv before the loop that callsdoc_release_device() on each floor. doc_release_device() frees thedocg3 struct via kfree(docg3) at line 1881. After the loop,docg3->cascade->bch dereferences the already-freed pointer.Fix this by accessing cascade->bch directly, which is equivalentsince docg3->cascade points back to the same cascade struct, andis already available as a local variable. This also removes thenow-unused docg3 local variable.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:lib/scatterlist: fix length calculations in extract_kvec_to_sgPatch series "Fix bugs in extract_iter_to_sg()", v3.Fix bugs in the kvec and user variants of extract_iter_to_sg. This seriesis growing due to useful remarks made by sashiko.dev.The main bugs are:- The length for an sglist entry when extracting from a kvec can exceed the number of bytes in the page. This is obviously not intended.- When extracting a user buffer the sglist is temporarily used as a scratch buffer for extracted page pointers. If the sglist already contains some elements this scratch buffer could overlap with existing entries in the sglist.The series adds test cases to the kunit_iov_iter test that demonstrate allof these bugs. Additionally, there is a memory leak fix for the testitself.The bugs were orignally introduced into kernel v6.3 where the functionlived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c inv6.5. Thus the actual fix is only marked for backports to v6.5+.This patch (of 5):When extracting from a kvec to a scatterlist, do not cross pageboundaries. The required length was already calculated but not used asintended.Adjust the copied length if the loop runs out of sglist entries withoutextracting everything.While there, return immediately from extract_iter_to_sg if there are nosglist entries at all.A subsequent commit will add kunit test cases that demonstrate that thepatch is necessary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: caam - guard HMAC key hex dumps in hash_digest_keyUse print_hex_dump_devel() for dumping sensitive HMAC key bytes inhash_digest_key() to avoid leaking secrets at runtime whenCONFIG_DYNAMIC_DEBUG is enabled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pmdomain: core: Fix detach procedure for virtual devices in genpdIf a device is attached to a PM domain through genpd_dev_pm_attach_by_id(),genpd calls pm_runtime_enable() for the corresponding virtual device thatit registers. While this avoids boilerplate code in drivers, there is nocorresponding call to pm_runtime_disable() in genpd_dev_pm_detach().This means these virtual devices are typically detached from its genpd,while runtime PM remains enabled for them, which is not how things aredesigned to work. In worst cases it may lead to critical errors, like aNULL pointer dereference bug in genpd_runtime_suspend(), which was recentlyreported. For another case, we may end up keeping an unnecessary vote for aperformance state for the device.To fix these problems, let's add this missing call to pm_runtime_disable()in genpd_dev_pm_detach().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:clk: microchip: mpfs-ccc: fix out of bounds access during output registrationUBSAN reported an out of bounds access during registration of the lasttwo outputs. This out of bounds access occurs because space is onlyallocated in the hws array for two PLLs and the four output dividersthat each has, but the defined IDs contain two DLLS and their twooutputs each, which are not supported by the driver. The ID order isPLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDsby two while adding them to the array to avoid the problem.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: fix held lock freed on hfsplus_fill_super()hfsplus_fill_super() calls hfs_find_init() to initialize a searchstructure, which acquires tree->tree_lock. If the subsequent call tohfsplus_cat_build_key() fails, the function jumps to the out_put_rooterror label without releasing the lock. The later cleanup path thenfrees the tree data structure with the lock still held, triggering aheld lock freed warning.Fix this by adding the missing hfs_find_exit(&fd) call before jumpingto the out_put_root error label. This ensures that tree->tree_lock isproperly released on the error path.The bug was originally detected on v6.13-rc1 using an experimentalstatic analysis tool we are developing, and we have verified that theissue persists in the latest mainline kernel. The tool is specificallydesigned to detect memory management issues. It is currently under activedevelopment and not yet publicly available.We confirmed the bug by runtime testing under QEMU with x86_64 defconfig,lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, weused GDB to dynamically shrink the max_unistr_len parameter to 1 beforehfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturallyreturn -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() andexercises the faulty error path. The following warning was observedduring mount: ========================= WARNING: held lock freed! 7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted ------------------------- mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there! ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 2 locks held by mount/174: #0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40 #1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 stack backtrace: CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x82/0xd0 debug_check_no_locks_freed+0x13a/0x180 kfree+0x16b/0x510 ? hfsplus_fill_super+0xcb4/0x18a0 hfsplus_fill_super+0xcb4/0x18a0 ? __pfx_hfsplus_fill_super+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x65f/0xc30 ? srso_return_thunk+0x5/0x5f ? pointer+0x4ce/0xbf0 ? trace_contention_end+0x11c/0x150 ? __pfx_pointer+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x79b/0xc30 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? vsnprintf+0x6da/0x1270 ? srso_return_thunk+0x5/0x5f ? __mutex_unlock_slowpath+0x157/0x740 ? __pfx_vsnprintf+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? mark_held_locks+0x49/0x80 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? irqentry_exit+0x17b/0x5e0 ? trace_irq_disable.constprop.0+0x116/0x150 ? __pfx_hfsplus_fill_super+0x10/0x10 ? __pfx_hfsplus_fill_super+0x10/0x10 get_tree_bdev_flags+0x302/0x580 ? __pfx_get_tree_bdev_flags+0x10/0x10 ? vfs_parse_fs_qstr+0x129/0x1a0 ? __pfx_vfs_parse_fs_qstr+0x3/0x10 vfs_get_tree+0x89/0x320 fc_mount+0x10/0x1d0 path_mount+0x5c5/0x21c0 ? __pfx_path_mount+0x10/0x10 ? trace_irq_enable.constprop.0+0x116/0x150 ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x307/0x540 ? user_path_at+0x51/0x60 ? __x64_sys_mount+0x212/0x280 ? srso_return_thunk+0x5/0x5f __x64_sys_mount+0x212/0x280 ? __pfx___x64_sys_mount+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f do_syscall_64+0x111/0x680 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ffacad55eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8 RSP: 002b---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:selinux: allow multiple opens of /sys/fs/selinux/policyCurrently there can only be a single open of /sys/fs/selinux/policy atany time. This allows any process to block any other process fromreading the kernel policy. The original motivation seems to have beena mix of preventing an inconsistent view of the policy size andpreventing userspace from allocating kernel memory without bound, butthis is arguably equally bad. Eliminate the policy_opened flag andshrink the critical section that the policy mutex is held. While weare making changes here, drop a couple of extraneous BUG_ONs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:flow_dissector: do not dissect PPPoE PFC framesRFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOTRECOMMENDED for PPPoE. In practice, pppd does not support negotiatingPFC for PPPoE sessions, and the flow dissector driver has assumed anuncompressed frame until the blamed commit.During the review process of that commit [1], support for PFC issuggested. However, having a compressed (1-byte) protocol field meansthe subsequent PPP payload is shifted by one byte, causing 4-bytemisalignment for the network header and an unaligned access exceptionon some architectures.The exception can be reproduced by sending a PPPoE PFC frame to anethernet interface of a MIPS board, with RPS enabled, even if no PPPoEsession is active on that interface:$ 0 : 00000000 80c40000 00000000 85144817$ 4 : 00000008 00000100 80a75758 81dc9bb8$ 8 : 00000010 8087ae2c 0000003d 00000000$12 : 000000e0 00000039 00000000 00000000$16 : 85043240 80a75758 81dc9bb8 00006488$20 : 0000002f 00000007 85144810 80a70000$24 : 81d1bda0 00000000$28 : 81dc8000 81dc9aa8 00000000 805ead08Hi : 00009d51Lo : 2163358aepc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50ra : 805ead08 __skb_get_hash_net+0x74/0x12cStatus: 11000403 KERNEL EXL IECause : 40800010 (ExcCode 04)BadVA : 85144817PrId : 0001992f (MIPS 1004Kc)Call Trace:[<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50[<805ead08>] __skb_get_hash_net+0x74/0x12c[<805ef330>] get_rps_cpu+0x1b8/0x3fc[<805fca70>] netif_receive_skb_list_internal+0x324/0x364[<805fd120>] napi_complete_done+0x68/0x2a4[<8058de5c>] mtk_napi_rx+0x228/0xfec[<805fd398>] __napi_poll+0x3c/0x1c4[<805fd754>] napi_threaded_poll_loop+0x234/0x29c[<805fd848>] napi_threaded_poll+0x8c/0xb0[<80053544>] kthread+0x104/0x12c[<80002bd8>] ret_from_kernel_thread+0x14/0x1cCode: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000To reduce the attack surface and maintain performance, do not processPPPoE PFC frames.[1] https://lore.kernel.org/r/20220630231016.GA392@debian.home
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: videobuf2: Set vma_flags in vb2_dma_sg_mmapvb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do notsee a reason why vb2_dma_sg should behave differently. This avoidshitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` indrm_gem_mmap_obj() during mmap() of an imported dma-buf from the out oftree Apple ISP camera capture driver which uses vb2_dma_sg_memops.gst-launch-1.0 v4l2src ! gtk4paintablesink[ 38.201528] ------------[ cut here ]------------[ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210[ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimersnd_seq snd_seq_device uinput nf_conntrack_netbios_nsnf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fibnft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_natnf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnepnls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcchid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_genericcfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydevaop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_normacsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmimacsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmonapple_sart apple_dockchannel macsmc apple_rtkit_helperspmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efusespinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_corespi_apple[ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram[ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full)[ 38.219040] Tainted: [W]=WARN[ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)[ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)[ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210[ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210[ 38.222178] sp : ffffc0008dc678e0[ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480[ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968[ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0[ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968[ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8[ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff[ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8[ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000[ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038[ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb[ 38.231488] Call trace:[ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P)[ 38.232342] drm_gem_mmap+0x140/0x260[ 38.232813] __mmap_region+0x488/0x9a0[ 38.233277] mmap_region+0xd0/0x148[ 38.233703] do_mmap+0x350/0x5c0[ 38.234148] vm_mmap_pgoff+0x14c/0x200[ 38.234612] ksys_mmap_pgoff+0x150/0x208[ 38.235107] __arm64_sys_mmap+0x34/0x50[ 38.235611] invoke_syscall+0x50/0x120[ 38.236075] el0_svc_common.constprop.0+0x48/0xf0[ 38.236680] do_el0_svc+0x24/0x38[ 38.237113] el0_svc+0x38/0x168[ 38.237507] el0t_64_sync_handler+0xa0/0xe8[ 38.238034] el0t_64_sync+0x198/0x1a0[ 38.238491] ---[ end trace 0000000000000000 ]---There were discussions in [1] at the end of 2023 that mmap() on imported---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/v3d: Reject empty multisync extension to prevent infinite loopv3d_get_extensions() walks a userspace-provided singly-linked list ofioctl extensions without any bound on the chain length. A local usercan craft a self-referential extension (ext->next == &ext) with zeroin_sync_count and out_sync_count, which bypasses the existing duplicate-extension guard: if (se->in_sync_count || se->out_sync_count) return -EINVAL;The guard never fires because v3d_get_multisync_post_deps() returnsimmediately when count is zero, leaving both fields at zero on everyiteration. The result is an infinite loop in kernel context, blockingthe calling thread and pegging a CPU core indefinitely.Fix this by rejecting a multisync extension where both in_sync_countand out_sync_count are zero in v3d_get_multisync_submit_deps(). Anempty multisync carries no synchronization information and serves nouseful purpose, so returning -EINVAL for such an extension is thecorrect defense against this attack vector.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tun: free page on short-frame rejection in tun_xdp_one()tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN withoutfreeing the page that vhost_net_build_xdp() allocated for it.tun_sendmsg() discards that -EINVAL and still returns total_len, sovhost_tx_batch() takes the success path and never frees the page; eachshort frame in a batch leaks one page-frag chunk.A local process that can open /dev/net/tun and /dev/vhost-net can hitthis path: it attaches a tun/tap device as the vhost-net backend andfeeds TX descriptors whose length minus the virtio-net header is belowETH_HLEN. Each kick leaks the page-frag chunks for that batch, and atight submission loop exhausts host memory and triggers an OOM panic.Free the page before returning -EINVAL, matching the XDP-program errorpath in the same function.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: containerd is an open-source container runtime. Versions prior to 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2, contain a vulnerability that allows a maliciously crafted image to cause a Denial of Service (DoS) condition. When creating a container from this image, memory exhaustion occurs, leading to an Out Of Memory (OOM) kill of the containerd process. This renders the container runtime API unavailable and can disrupt clients such as the Docker Engine or Kubernetes control-plane components. This issue has been fixed in versions 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: jq is a command-line JSON processor. Prior to 1.8.2, comparing two sufficiently deeply nested arrays with the == operator exhausts the C stack on jq's ordinary command-line surface, resulting in denial of service via stack exhaustion (uncontrolled recursion). The crash occurs in jq's recursive structural comparison code, with the recursion repeating through jvp_array_equal() and jv_equal() in src/jv.c when comparing deeply nested arrays; a nearby sort comparator path through jv_cmp() in src/jv_aux.c overflows the stack at a larger nesting depth from the same missing recursion guard. Anyone running jq comparisons on attacker-controlled deeply nested JSON values, or embedding jq in a context where untrusted data can reach the == comparison path, is affected. This vulnerability is fixed in 1.8.2.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: A flaw was found in polkit. A local user can exploit this by providing a specially crafted, excessively long input to the `polkit-agent-helper-1` setuid binary via standard input (stdin). This unbounded input can lead to an out-of-memory (OOM) condition, resulting in a Denial of Service (DoS) for the system.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpolkit-agent-1-0 > 0-0 (version in image is 121-150500.3.11.1).
Description: A NULL pointer dereference in the SQLite Session Extension in SQLite 3.53.1 and SQLite trunk builds before check-in e807d4e3798efd53 allows an attacker who can supply a malformed changeset blob to cause a denial of service. The issue occurs when sqlite3changeset_apply_v3() applies a corrupt changeset and reaches sqlite3_value_type() with a NULL sqlite3_value pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsqlite3-0 > 0-0 (version in image is 3.51.3-150000.3.39.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA: During rereg_mr ensure that REREG_ACCESS is compatibleIf IB_MR_REREG_ACCESS changes from RO to RW then the umem has to bere-evaluated to ensure it is properly pinned as RW. Since the umem ishidden inside each driver's mr struct add a ib_umem_check_rereg() functionthat each driver has to call before processing IB_MR_REREG_ACCESS.mlx4 has to retain its duplicate ib_access_writable check because itimplements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both itemsin place sequentially while the MR is live, so it will continue to notsupport this combination.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: v: stop OGMv2 on disabled interfaceWhen a batadv_hard_iface is disabled, its mesh_iface pointer is set toNULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs viabatadv_v_ogm_queue_on_if() for interfaces that have since lost theirmesh_iface association. This results in a NULL pointer dereference whenbatadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on thenow NULL hard_iface->mesh_iface to retrieve the batadv_priv.It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks thatit is using the same mesh_iface for which batadv_v_ogm_send_meshif() wascalled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ipset: stop hash:* range iteration at endThe following hash set variants:hash:ip,markhash:ip,porthash:ip,port,iphash:ip,port,netiterate IPv4 ranges with a 32-bit iterator.The iterator must stop once the last address in the requested range hasbeen processed. Advancing it once more can move the traversal state pastthe end of the request, so a later retry may continue from an unintendedposition.Handle the iterator increment explicitly at the end of the loop and stoponce the upper bound has been processed. This keeps the existing retrybehaviour intact for valid ranges while preventing traversal fromcontinuing past the original boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: dat: handle forward allocation errorbatadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skbfor each DHT candidate, but does not check the return value before passingit to batadv_send_skb_prepare_unicast_4addr(). That function dereferencesthe skb unconditionally, so a failed allocation triggers a NULL pointerdereference.Skip forwarding to the current DHT candidate on allocation failure.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vrf: Fix a potential NPD when removing a port from a VRFRCU readers that identified a net device as a VRF port usingnetif_is_l3_slave() assume that a subsequent call tonetdev_master_upper_dev_get_rcu() will return a VRF device. They thencontinue to dereference its l3mdev operations.This assumption is not always correct and can result in a NPD [1]. Thereis no RCU synchronization when removing a port from a VRF, so it ispossible for an RCU reader to see a new master device (e.g., a bridge)that does not have l3mdev operations.Fix by adding RCU synchronization after clearing the IFF_L3MDEV_SLAVEflag. Skip this synchronization when a net device is removed from a VRFas part of its deletion and when the VRF device itself is deleted. Inthe latter case an RCU grace period will pass by the time RTNL isreleased.[1]BUG: kernel NULL pointer dereference, address: 0000000000000000[...]RIP: 0010:l3mdev_fib_table_rcu (net/l3mdev/l3mdev.c:181)[...]Call Trace:l3mdev_fib_table_by_index (net/l3mdev/l3mdev.c:201 net/l3mdev/l3mdev.c:189)__inet_bind (net/ipv4/af_inet.c:499 (discriminator 3))inet_bind_sk (net/ipv4/af_inet.c:469)__sys_bind (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:1951 (discriminator 1))__x64_sys_bind (net/socket.c:1969 (discriminator 1) net/socket.c:1967 (discriminator 1) net/socket.c:1967 (discriminator 1))do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:af_unix: Reject SIOCATMARK on non-stream socketsSIOCATMARK reports whether the receive queue is at the urgent mark forMSG_OOB.In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),so they should not support SIOCATMARK either.Return -EOPNOTSUPP for non-stream sockets before checking the receivequeue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: stream: fully roll back denied add-stream stateWhen ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks andthen lowers outcnt. That leaves removed stream metadata behind, so alater re-add can reuse a stale ext and hit a null-pointer dereference inthe scheduler get path.Fix the rollback by tearing down the removed stream state the same wayother stream resizes do. Unschedule the current scheduler state, dropthe removed stream ext state with sctp_stream_outq_migrate(), and thenreschedule the remaining streams.This keeps scheduler-private RR/FC/PRIO lists consistent while fullyrolling back denied outgoing stream additions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipc/shm: serialize orphan cleanup with shm_nattch updatesshm_destroy_orphaned() walks the shm idr under shm_ids(ns).rwsem, but thatdoes not serialize all fields tested by shm_may_destroy(). In particular,shm_nattch is updated while holding shm_perm.lock, and attach paths can dothat without holding the rwsem.Do not decide that an orphaned segment is unused before taking the objectlock. Move the shm_may_destroy() check under shm_perm.lock, matching theother destroy paths, and unlock the segment when it no longer qualifiesfor removal.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tp_meter: avoid use of uninit sender varsbatadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in theBATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, itproceeds to read sender-only members that were never initialized, leadingto undefined behavior.This can be triggered when a node that is currently acting as a receiver inan ongoing tp_meter session receives a malicious ACK packet.Guard against this by checking tp_vars->role immediately after thelookup and bailing out if it is not BATADV_TP_SENDER, before any ofthose members are accessed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/poll: fix signed comparison in io_poll_get_ownership()io_poll_get_ownership() uses a signed comparison to check whetherpoll_refs has reached the threshold for the slowpath: if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS))atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG(BIT(31)) is set in poll_refs, the value becomes negative insigned arithmetic, so the >= 128 comparison always evaluates tofalse and the slowpath is never taken.Fix this by casting the atomic_read() result to unsigned intbefore the comparison, so that the cancel flag is treated as alarge positive value and correctly triggers the slowpath.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tvlv: reject oversized TVLV packetsbatadv_tvlv_container_ogm_append() builds a TVLV packet section fromthe tvlv.container_list. The total size of this section is computed bybatadv_tvlv_container_list_size(), which sums the sizes of all registeredcontainers.The return type and accumulator in batadv_tvlv_container_list_size() wereu16. If the accumulated size exceeds U16_MAX, the value wraps around,causing the subsequent allocation in batadv_tvlv_container_ogm_append()to be undersized. The memcpy-style copy that follows would then writebeyond the end of the allocated buffer, corrupting kernel memory.Fix this by widening the return type of batadv_tvlv_container_list_size()to size_t. In batadv_tvlv_container_ogm_append(), check the computed lengthagainst U16_MAX before proceeding, and bail out as if the allocation hadfailed when the limit is exceeded.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: espintcp: do not reuse an in-progress partial sendespintcp keeps a single in-flight transmit in ctx->partial.Before building a new sk_msg, espintcp_sendmsg() first tries to flushthat state through espintcp_push_msgs().For blocking callers, espintcp_push_msgs() may return success even whenthe previous partial send is still pending. espintcp_sendmsg() wouldthen reinitialize emsg->skmsg and reuse ctx->partial while the oldtransfer still owns that state.Do not rebuild the send message when ctx->partial is still in progress.If espintcp_push_msgs() returns with emsg->len still set, fail the newsend instead of overwriting the live partial state.This is a memory-safety fix: reusing the live partial-send state canleave a stale offset attached to a new sk_msg and lead to an out-of-bounds read in the send path.tcp_sendmsg_locked() already handles waiting for send buffer memory, sothe fix here is just to preserve espintcp's one-message-at-a-timetransmit state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: jitterentropy - replace long-held spinlock with mutexjent_kcapi_random() serializes the shared jitterentropy state, but itcurrently holds a spinlock across the jent_read_entropy() call. Thatpath performs expensive jitter collection and SHA3 conditioning, soparallel readers can trigger stalls as contending waiters spin forthe same lock.To prevent non-preemptible lock hold, replace rng->jent_lock with amutex so contended readers sleep instead of spinning on a shared lockheld across expensive entropy generation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDRIn the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of anuninitialised on-stack struct sockaddr_storage to userspace viaifr_hwaddr, but netif_get_mac_address() only writes sa_family anddev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on amacvtap chardev returns kernel .text and direct-map pointers, defeatingKASLR.Initialise ss at declaration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completionrds_ib_xmit_atomic() always programs a masked atomic opcode(IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD)for every RDS atomic cmsg. But the completion-side switch inrds_ib_send_unmap_op() only handles the non-masked opcodes, so a maskedatomic completion falls through to default and returns rm == NULL whilesend->s_op is left set. rds_ib_send_cqe_handler() then dereferences theNULL rm via rm->m_final_op, oopsing in softirq context. An unprivilegedAF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connectiontriggers it; on hardware that natively accepts masked atomics (mlx4,mlx5) no extra setup is needed. RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR! Oops: general protection fault [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197] RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282) Call Trace: rds_ib_send_cqe_handler (net/rds/ib_send.c:282) poll_scq (net/rds/ib_cm.c:274) rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294) tasklet_action_common (kernel/softirq.c:943) handle_softirqs (kernel/softirq.c:573) run_ksoftirqd (kernel/softirq.c:479) Kernel panic - not syncing: Fatal exception in interruptHandle the masked atomic opcodes in the same case as the non-maskedones: they map to the same struct rds_message.atomic union member, sothe existing container_of()/rds_ib_send_unmap_atomic() body is correctfor them.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepointThe smc_msg_event tracepoint class, shared by smc_tx_sendmsg andsmc_rx_recvmsg, unconditionally dereferences smc->conn.lnk: __string(name, smc->conn.lnk->ibname)conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code onthese paths already handles this (e.g. !conn->lnk inSMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the firstsendmsg()/recvmsg() on an SMC-D socket crashes: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [...] RIP: 0010:strlen+0x1e/0xa0 Call Trace: trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44) smc_rx_recvmsg (net/smc/smc_rx.c:515) smc_recvmsg (net/smc/af_smc.c:2859) __sys_recvfrom (net/socket.c:2315) __x64_sys_recvfrom (net/socket.c:2326) do_syscall_64The faulting address 0x3e0 is offsetof(struct smc_link, ibname),confirming the NULL ->lnk deref. Enabling the tracepoint requiresroot, but the trigger itself is unprivileged: socket(AF_SMC, ...) hasno capability check, and SMC-D negotiation needs no admin step ons390 or on x86 with the loopback ISM device loaded.Log an empty device name for SMC-D instead of dereferencing NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_log: validate MAC header was set before dumping itThe fallback path of dump_mac_header() guards the MAC header accessonly with "skb->mac_header != skb->network_header", without checkingskb_mac_header_was_set(). When the MAC header is unset, mac_header is0xffff, so the test passes and skb_mac_header(skb) returnsskb->head + 0xffff, ~64 KiB past the buffer; the loop then readsdev->hard_header_len bytes out of bounds into the kernel log.This is reachable via the netdev logger: nf_log_unknown_packet() callsdump_mac_header() unconditionally, and an skb sent through AF_PACKETwith PACKET_QDISC_BYPASS reaches the egress hook with mac_header stillunset (__dev_queue_xmit(), which would reset it, is bypassed).Add the skb_mac_header_was_set() check the ARPHRD_ETHER path alreadyuses, and replace the open-coded MAC header length test withskb_mac_header_len(). Only skbs with an unset MAC header are affected;valid ones are dumped as before. BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831) Read of size 1 at addr ffff88800ea49d3f by task exploit/148 Call Trace: kasan_report (mm/kasan/report.c:595) dump_mac_header (net/netfilter/nf_log_syslog.c:831) nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963) nf_log_packet (net/netfilter/nf_log.c:260) nft_log_eval (net/netfilter/nft_log.c:60) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307) nf_hook_slow (net/netfilter/core.c:619) nf_hook_direct_egress (net/packet/af_packet.c:257) packet_xmit (net/packet/af_packet.c:280) packet_sendmsg (net/packet/af_packet.c:3114) __sys_sendto (net/socket.c:2265)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qrtr: fix refcount saturation and potential UAF in qrtr_port_removeIn qrtr_port_remove(), the socket reference count is decremented via__sock_put() before the port is removed from the qrtr_ports XArray andbefore the RCU grace period elapses.This breaks the fundamental RCU update paradigm. It exposes a racewindow where a concurrent RCU reader (such as qrtr_reset_ports() orqrtr_port_lookup()) can obtain a pointer to the socket from the XArray,and attempt to call sock_hold() on a socket whose reference count hasalready dropped to zero.This exact race condition was hit during syzkaller fuzzing, leading tothe following refcount saturation warning and a potential Use-After-Free: refcount_t: saturated; leaking memory. WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0 Modules linked in: qrtr(+) bochs drm_shmem_helper ... Call Trace: qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr] __qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr] qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr] kernel_bind+0xe4/0x120 net/socket.c:3592 qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr] qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr] do_one_initcall+0xf5/0x5e0 init/main.c:1283 ... Fix this by deferring the reference count decrement until after thexa_erase() and the synchronize_rcu() complete.(Note: The v1 of this patch incorrectly replaced __sock_put() withsock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove()still hold a reference to the socket, so freeing the socket memory herewould lead to a subsequent UAF in the caller. Thus, the __sock_put() iskept, but only repositioned to close the RCU race.)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctlWhile fuzzing with Syzkaller, a persistent `schedule_timeout: wrongtimeout value` warning was observed, accompanied by SMBus controllerstate machine corruption.The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of10 ms. The user argument is checked against INT_MAX, but it issubsequently multiplied by 10 before being passed to msecs_to_jiffies().A malicious user can pass a large value (e.g., 429496729) that passesthe `arg > INT_MAX` check but overflows when multiplied by 10. Thisresults in a truncated 32-bit unsigned value that bypasses theinternal `(int)m < 0` check in `msecs_to_jiffies()`.The truncated value is then assigned to `client->adapter->timeout`(a signed 32-bit int), which is reinterpreted as a negative number.When passed to wait_for_completion_timeout(), this negative valueundergoes sign extension to a 64-bit unsigned long, triggering the`schedule_timeout` warning and causing premature returns. This leavesthe SMBus state machine in an unrecoverable state, constituting alocal Denial of Service (DoS).Fix this by bounding the user argument to `INT_MAX / 10`.[wsa: move the comment as well]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob sizeThe generic/642 test-case can reproduce the kernel crash:[40243.605254] ------------[ cut here ]------------[40243.605956] kernel BUG at fs/ceph/xattr.c:918![40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[40243.611820] Workqueue: ceph-msgr ceph_con_workfn[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0[40243.627408] Call Trace:[40243.627839] [40243.628188] __prep_cap+0x3fd/0x4a0[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0[40243.629474] ceph_check_caps+0x46a/0xc80[40243.630094] ? __lock_acquire+0x4a2/0x2650[40243.630773] ? find_held_lock+0x31/0x90[40243.631347] ? handle_cap_grant+0x79f/0x1060[40243.632068] ? lock_release+0xd9/0x300[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340[40243.633429] ? lock_release+0xd9/0x300[40243.634052] handle_cap_grant+0xcf6/0x1060[40243.634745] ceph_handle_caps+0x122b/0x2110[40243.635415] mds_dispatch+0x5bd/0x2160[40243.636034] ? ceph_con_process_message+0x65/0x190[40243.636828] ? lock_release+0xd9/0x300[40243.637431] ceph_con_process_message+0x7a/0x190[40243.638184] ? kfree+0x311/0x4f0[40243.638749] ? kfree+0x311/0x4f0[40243.639268] process_message+0x16/0x1a0[40243.639915] ? sg_free_table+0x39/0x90[40243.640572] ceph_con_v2_try_read+0xf58/0x2120[40243.641255] ? lock_acquire+0xc8/0x300[40243.641863] ceph_con_workfn+0x151/0x820[40243.642493] process_one_work+0x22f/0x630[40243.643093] ? process_one_work+0x254/0x630[40243.643770] worker_thread+0x1e2/0x400[40243.644332] ? __pfx_worker_thread+0x10/0x10[40243.645020] kthread+0x109/0x140[40243.645560] ? __pfx_kthread+0x10/0x10[40243.646125] ret_from_fork+0x3f8/0x480[40243.646752] ? __pfx_kthread+0x10/0x10[40243.647316] ? __pfx_kthread+0x10/0x10[40243.647919] ret_from_fork_asm+0x1a/0x30[40243.648556] [40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore[40243.654766] ---[ end trace 0000000000000000 ]---Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDSmaximum xattr size") moved the required_blob_size computation to beforethe __build_xattrs() call, introducing a race.__build_xattrs() releases and reacquires i_ceph_lock during execution.In that window, handle_cap_grant() may update i_xattrs.blob with anewer MDS-provided blob and bump i_xattrs.version. When__bui---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failureWhen ttm_tt_swapout() fails, the current code callsttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()to restore the resource's bulk_move membership.However, ttm_resource_move_to_lru_tail() places the resource at the tailof the LRU list which, relative to the walk cursor's hitch node (placedimmediately after the resource when it was yielded), puts the resource*in front of the* the hitch. The next list_for_each_entry_continue() fromthe hitch finds the same resource again, causing an infinite loop.Fix by deferring del_bulk_move to the success path only.On the success path, TTM_TT_FLAG_SWAPPED has just been set byttm_tt_swapout() but the resource is still tracked in the bulk_move range,so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard wouldincorrectly skip the removal. Introducettm_resource_del_bulk_move_unevictable() which bypasses that guard.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: 3ad: implement proper RCU rules for port->aggregatorsyzbot found a data-race in bond_3ad_get_active_agg_info /bond_3ad_state_machine_handler [1] which hints at lack of properRCU implementation.Add __rcu qualifier to port->aggregator, and add proper RCU API.[1]BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handlerwrite to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0: ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline] bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569 process_one_work kernel/workqueue.c:3302 [inline] process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385 worker_thread+0x58a/0x780 kernel/workqueue.c:3466 kthread+0x22a/0x280 kernel/kthread.c:436 ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1: __bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline] bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881 bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853 rtnl_link_info_fill net/core/rtnetlink.c:906 [inline] rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927 rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168 rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453 rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline] rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495 __dev_notify_flags+0x76/0x390 net/core/dev.c:9790 netif_change_flags+0xac/0xd0 net/core/dev.c:9823 do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180 rtnl_group_changelink net/core/rtnetlink.c:3813 [inline] __rtnl_newlink net/core/rtnetlink.c:3981 [inline] rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109 rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995 netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x563/0x5b0 net/socket.c:2698 ___sys_sendmsg+0x195/0x1e0 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787 x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fvalue changed: 0x0000000000000000 -> 0xffff88813cf5c400Reported by Kernel Concurrency Sanitizer on:CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full)Tainted: [W]=WARNHardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit()syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit()when accessing skb->len for tx statistics after usb_submit_urb() hasbeen called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226The URB completion handler write_bulk_callback() frees the skb viadev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPUin softirq context before usb_submit_urb() returns in the submitter,so by the time the submitter reads skb->len the skb has already beenqueued to the per-CPU completion_queue and freed by net_tx_action(): CPU A (xmit) CPU B (USB completion softirq) ------------ ------------------------------ dev->tx_skb = skb; usb_submit_urb() --+ |-------> write_bulk_callback() | dev_kfree_skb_irq(dev->tx_skb) | net_tx_action() | napi_skb_cache_put() <-- free netdev->stats.tx_bytes | += skb->len; <-- UAF readFix it by caching skb->len before submitting the URB and using thecached value when updating the tx_bytes counter.The pre-existing tx_bytes semantics are preserved: the counter tracksthe original frame length (skb->len), not the ETH_ZLEN/USB-alignmentpadded "count" value that is handed to the device. Changing thatwould be a user-visible accounting change and is out of scope forthis UAF fix.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: netem: fix queue limit check to include reordered packetsThe queue limit check in netem_enqueue() uses q->t_len which onlycounts packets in the internal tfifo. Packets placed in sch->q bythe reorder path (__qdisc_enqueue_head) are not counted, allowingthe total queue occupancy to exceed sch->limit under reordering.Include sch->q.qlen in the limit check.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netdevsim: zero initialize struct iphdr in dummy sk_buffSyzbot reports a KMSAN uninit-value originating fromnsim_dev_trap_skb_build, with the allocation alsobeing performed in the same function.Fix this by calling skb_put_zero instead of skb_put toguarantee zero initialization of the whole IP header.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sched/psi: fix race between file release and pressure writeA potential race condition exists between pressure write and cgroup filerelease regarding the priv member of struct kernfs_open_file, whichtriggers the uaf reported in [1].Consider the following scenario involving execution on two separate CPUs: CPU0 CPU1 ==== ==== vfs_rmdir() kernfs_iop_rmdir() cgroup_rmdir() cgroup_kn_lock_live() cgroup_destroy_locked() cgroup_addrm_files() cgroup_rm_file() kernfs_remove_by_name() kernfs_remove_by_name_ns() vfs_write() __kernfs_remove() new_sync_write() kernfs_drain() kernfs_fop_write_iter() kernfs_drain_open_files() cgroup_file_write() kernfs_release_file() pressure_write() cgroup_file_release() ctx = of->priv; kfree(ctx); of->priv = NULL; cgroup_kn_unlock() cgroup_kn_lock_live() cgroup_get(cgrp) cgroup_kn_unlock() if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->privThe cgroup_rmdir() is protected by the cgroup_mutex, it also safeguardsthe memory deallocation of of->priv performed within cgroup_file_release().However, the operations involving of->priv executed within pressure_write()are not entirely covered by the protection of cgroup_mutex. Consequently,if the code in pressure_write(), specifically the section handling thectx variable executes after cgroup_file_release() has completed, a uafvulnerability involving of->priv is triggered.Therefore, the issue can be resolved by extending the scope of thecgroup_mutex lock within pressure_write() to encompass all code pathsinvolving of->priv, thereby properly synchronizing the race conditionoccurring between cgroup_file_release() and pressure_write().And, if an live kn lock can be successfully acquired while executingthe pressure write operation, it indicates that the cgroup deletionprocess has not yet reached its final stage; consequently, the privpointer within open_file cannot be NULL. Therefore, the operation toretrieve the ctx value must be moved to a point *after* the live knlock has been successfully acquired.In another situation, specifically after entering cgroup_kn_lock_live()but before acquiring cgroup_mutex, there exists a different class ofrace condition:CPU0: write memory.pressure CPU1: write cgroup.pressure=0=========================== =============================kernfs_fop_write_iter() kernfs_get_active_of(of) pressure_write() cgroup_kn_lock_live(memory.pressure) cgroup_tryget(cgrp) kernfs_break_active_protection(kn) ... blocks on cgroup_mutex cgroup_pressure_write() cgroup_kn_lock_live(cgroup.pressure) cgroup_file_show(memory.pressure, false) kernfs_show(false) kernfs_drain_open_files() cgroup_file_release(of) kfree(ctx) of->priv = NULL cgroup_kn_unlock() ... acquires cgroup_mutex ctx = of->priv; // may now be NULL if (ctx->psi.trigger) // NULL dereferenceConsequently, there is a possibility that of->priv is NULL, the pressurewrite needs to check for this.Now that the scope of the cgroup_mutex has been expanded, the originalexplicit cgroup_get/put operations are no longer necessary, this isbecause acquiring/releasing the live kn lock inherently executes acgroup get/put operation.[1]BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011Call Trace: pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/adfs: validate nzones in adfs_validate_bblk()Reject ADFS disc records with a zero zone count during boot blockvalidation, before the disc record is used.When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...)which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes todm[-1], causing an out-of-bounds write before the allocated buffer.adfs_validate_dr0() already rejects nzones != 1 for old-formatimages. Add the equivalent check to adfs_validate_bblk() fornew-format images so that a crafted image with nzones == 0 isrejected at probe time.Found by syzkaller.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: fix MSG_ZEROCOPY pinned-pages accountingvirtio_transport_init_zcopy_skb() uses iter->count as the size argumentfor msg_zerocopy_realloc(), which in turn passes it tomm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, thisfunction is called after virtio_transport_fill_skb() has already consumedthe iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->countwill be 0, skipping the RLIMIT_MEMLOCK enforcement.Pass pkt_len (the total bytes being sent) as an explicit parameter tovirtio_transport_init_zcopy_skb() instead of reading the already-consumediter->count.This matches TCP and UDP, which both call msg_zerocopy_realloc() withthe original message size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/rds: zero per-item info buffer before handing it to visitorsrds_for_each_conn_info() and rds_walk_conn_path_info() both hand acaller-allocated on-stack u64 buffer to a per-connection visitor andthen copy the full item_len bytes back to user space viards_info_copy() regardless of how much of the buffer the visitoractually wrote.rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() onlywrite a subset of their output struct when the underlyingrds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sland the two GIDs via explicit memsets). Several u32 fields(max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size,cache_allocs) and the 2-byte alignment hole between sl andcache_allocs remain as whatever stack contents preceded the visitorcall and are then memcpy_to_user()'d out to user space.struct rds_info_rdma_connection and struct rds6_info_rdma_connectionare the only rds_info_* structs in include/uapi/linux/rds.h that arenot marked __attribute__((packed)), so they have a real alignmenthole. The other info visitors (rds_conn_info_visitor,rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields oftheir packed output struct today and are not known to be vulnerable,but a future visitor that adds a conditional write-path would havethe same bug.Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y:a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB,binds to a local address on an RDMA-capable netdev (rxe soft-RoCE onany netdev is sufficient), sendto()'s any peer on the same subnet(fails cleanly but installs an rds_connection in the global hash inRDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS,RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26bytes of stack garbage including kernel text/data pointers: 0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2 8..39 00 ... gids (memset-zeroed) 40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr) 48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max) 56..59 01 00 08 00 rdma_mr_size (garbage) 60..61 00 00 tos, sl 62..63 00 00 alignment padding 64..67 18 00 00 00 cache_allocs (garbage)Fix by zeroing the per-item buffer in both rds_for_each_conn_info()and rds_walk_conn_path_info() before invoking the visitor. Thiscovers the IPv4/IPv6 IB visitors and hardens all current and futurevisitors against the same class of bug.No functional change for visitors that fully populate their output.Changes in v2:- retarget at the net tree (subject prefix "[PATCH net v2]", net/rds: prefix in the title)- pick up Reviewed-by tags from Sharath Srinivasan and Allison Henderson
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_osf: fix potential NULL dereference in ttl checkThe nf_osf_ttl() function accessed skb->dev to perform a local interfaceaddress lookup without verifying that the device pointer was valid.Additionally, the implementation utilized an in_dev_for_each_ifa_rculoop to match the packet source address against local interfaceaddresses. It assumed that packets from the same subnet should not see adecrement on the initial TTL. A packet might appear it is from the samesubnet but it actually isn't especially in modern environments withcontainers and virtual switching.Remove the device dereference and interface loop. Replace the logic witha switch statement that evaluates the TTL according to the ttl_check.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_osf: fix out-of-bounds read on option matchingIn nf_osf_match(), the nf_osf_hdr_ctx structure is initialized onceand passed by reference to nf_osf_match_one() for each fingerprintchecked. During TCP option parsing, nf_osf_match_one() advances theshared ctx->optp pointer.If a fingerprint perfectly matches, the function returns early withoutrestoring ctx->optp to its initial state. If the user has configuredNF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint.However, because ctx->optp was not restored, the next call tonf_osf_match_one() starts parsing from the end of the options buffer.This causes subsequent matches to read garbage data and failimmediately, making it impossible to log more than one match or loggingincorrect matches.Instead of using a shared ctx->optp pointer, pass the context as aconstant pointer and use a local pointer (optp) for TCP optiontraversal. This makes nf_osf_match_one() strictly stateless from thecaller's perspective, ensuring every fingerprint check starts at thecorrect option offset.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nat: use kfree_rcu to release opsFlorian Westphal says:"Historically this is not an issue, even for normal base hooks: the datapath doesn't use the original nf_hook_ops that are used to register thecallbacks.However, in v5.14 I added the ability to dump the active netfilterhooks from userspace.This code will peek back into the nf_hook_ops that are availableat the tail of the pointer-array blob used by the datapath.The nat hooks are special, because they are called indirectly fromthe central nat dispatcher hook. They are currently invisible tothe nfnl hook dump subsystem though.But once that changes the nat ops structures have to be deferred too."Update nf_nat_register_fn() to deal with partial exposition of the hooksfrom error path which can be also an issue for nfnetlink_hook.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: xtables: restrict several matches to inet familyThis is a partial revert of: commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")to allow ipv4 and ipv6 only.- xt_mac- xt_owner- xt_physdevThese extensions are not used by ebtables in userspace.Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4specific.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: conntrack: remove sprintf usageReplace it with scnprintf, the buffer sizes are expected to be large enoughto hold the result, no need for snprintf+overflow check.Increase buffer size in mangle_content_len() while at it.BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270Write of size 1 at addr [..] vsnprintf+0xea5/0x1270 sprintf+0xb1/0xe0 mangle_content_len+0x1ac/0x280 nf_nat_sdp_session+0x1cc/0x240 process_sdp+0x8f8/0xb80 process_invite_request+0x108/0x2b0 process_sip_msg+0x5da/0xf50 sip_help_tcp+0x45e/0x780 nf_confirm+0x34d/0x990 [..]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pppoe: drop PFC framesRFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOTRECOMMENDED for PPPoE. In practice, pppd does not support negotiatingPFC for PPPoE sessions, and the current PPPoE driver assumes anuncompressed (2-byte) protocol field. However, the generic PPP layerfunction ppp_input() is not aware of the negotiation result, and stillaccepts PFC frames.If a peer with a broken implementation or an attacker sends a frame witha compressed (1-byte) protocol field, the subsequent PPP payload isshifted by one byte. This causes the network header to be 4-bytemisaligned, which may trigger unaligned access exceptions on somearchitectures.To reduce the attack surface, drop PPPoE PFC frames. Introduceppp_skb_is_compressed_proto() helper function to be used in bothppp_generic.c and pppoe.c to avoid open-coding.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunkssctp_getsockopt_peer_auth_chunks() checks that the caller's optvalbuffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL;but then writes num_chunks bytes to p->gauth_chunks, which livesat offset offsetof(struct sctp_authchunks, gauth_chunks) == 8inside optval. The check is missing the sizeof(structsctp_authchunks) = 8-byte header. When the caller supplieslen == num_chunks (for any num_chunks > 0) the test passes butcopy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytespast the declared buffer.The sibling function sctp_getsockopt_local_auth_chunks() at thenext line already has the correct check: if (len < sizeof(struct sctp_authchunks) + num_chunks) return -EINVAL;Align the peer variant with its sibling.Reproducer confirms on v7.0-13-generic: an unprivileged userspacecaller that opens a loopback SCTP association with AUTH enabled,queries num_chunks with a short optval, then issues the realgetsockopt with len == num_chunks and sentinel bytes painted pastthe buffer observes those sentinel bytes overwritten with thepeer's AUTH chunk type. The bytes written are under the peer'scontrol but land in the caller's own userspace; this is not akernel memory corruption, but it is a kernel-side contractviolation that can silently corrupt adjacent userspace data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: fix possible UAF in icmpv6_rcv()Caching saddr and daddr before pskb_pull() is problematicsince skb->head can change.Remove these temporary variables:- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path.- Avoid potential future misuse after pskb_pull() call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ice: fix double-free of tx_buf skbIf ice_tso() or ice_tx_csum() fail, the error path inice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still pointsto it and is marked as valid (ICE_TX_BUF_SKB).'next_to_use' remains unchanged, so the potential problem willlikely fix itself when the next packet is transmitted and the tx_bufgets overwritten. But if there is no next packet and the interface isbrought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()will find the tx_buf and free the skb for the second time.The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the errorpath, so that ice_unmap_and_free_tx_buf().Move the initialization of 'first' up, to ensure it's already valid incase we hit the linearization error path.The bug was spotted by AI while I had it looking for something else.It also proposed an initial version of the patch.I reproduced the bug and tested the fix by adding code to injectfailures, on a build with KASAN.I looked for similar bugs in related Intel drivers and did not find any.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: taprio: fix use-after-free in advance_sched() on schedule switchIn advance_sched(), when should_change_schedules() returns true,switch_schedules() is called to promote the admin schedule to oper.switch_schedules() queues the old oper schedule for RCU freeing viacall_rcu(), but 'next' still points into an entry of the old operschedule. The subsequent 'next->end_time = end_time' andrcu_assign_pointer(q->current_entry, next) are use-after-free.Fix this by selecting 'next' from the new oper schedule immediatelyafter switch_schedules(), and using its pre-calculated end_time.setup_first_end_time() sets the first entry's end_time tobase_time + interval when the schedule is installed, so the valueis already correct.The deleted 'end_time = sched_base_time(admin)' assignment was alsoharmful independently: it would overwrite the new first entry'spre-calculated end_time with just base_time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFFmacvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, butmacvlan_fill_info() conditionally includes it when port->bc_cutoff != 1.This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skbruns out of space, triggering a WARN_ON in rtnetlink and preventing theinterface from being dumped.The bug can be reproduced with: ip link add macvlan0 link eth0 type macvlan mode bridge ip link set macvlan0 type macvlan bc_cutoff 0 ip -d link show macvlan0 # fails with -EMSGSIZEThe bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Addnetlink attribute for broadcast cutoff"), which added the nla_put_s32()call in macvlan_fill_info() but missed adding the correspondingnla_total_size(4) in macvlan_get_size(). A follow-up commit55cef78c244d ("macvlan: add forgotten nla_policy forIFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but stilldid not fix the size calculation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: unify lcn as u64 for 32-bit platformsAs sashiko reported [1], `lcn` was typed as `unsigned long` (or`unsigned int` sometimes), which is only 32 bits wide on 32-bitplatforms, which causes `(lcn << lclusterbits)` to be truncatedat 4 GiB.In order to consolidate the logic, just use `u64` consistentlyaround the codebase.[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: fix data loss caused by incorrect use of nat_entry flagData loss can occur when fsync is performed on a newly created file(before any checkpoint has been written) concurrently with a checkpointoperation. The scenario is as follows:create & write & fsync 'file A' write checkpoint- f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes - f2fs_sync_node_pages - f2fs_flush_nat_entries - f2fs_fsync_node_pages // no dirty node - f2fs_need_inode_block_update // return false SPO and lost 'file A'f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNCflags for the nat_entry, but this does not mean that the checkpoint hasactually completed successfully. However, f2fs_need_inode_block_update()checks these flags and incorrectly assumes that the checkpoint hasfinished.The root cause is that the semantics of IS_CHECKPOINTED andHAS_LAST_FSYNC are only guaranteed after the checkpoint write fullycompletes.This patch modifies f2fs_need_inode_block_update() to acquire thesbi->node_write lock before reading the nat_entry flags, ensuring thatonce IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, thecheckpoint operation has already completed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: avoid reading already updated pages during GCWe found the following issue during fuzz testing:page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9memcg:f8ffff800e269c00aops:f2fs_meta_aops ino:2flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a)raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio))page_owner tracks the page as allocated post_alloc_hook+0x58c/0x5ec prep_new_page+0x34/0x284 get_page_from_freelist+0x2dcc/0x2e8c __alloc_pages_noprof+0x280/0x76c __folio_alloc_noprof+0x18/0xac __filemap_get_folio+0x6bc/0xdc4 pagecache_get_page+0x3c/0x104 do_garbage_collect+0x5c78/0x77a4 f2fs_gc+0xd74/0x25f0 gc_thread_func+0xb28/0x2930 kthread+0x464/0x5d8 ret_from_fork+0x10/0x20------------[ cut here ]------------kernel BUG at mm/filemap.c:1563! folio_end_read+0x140/0x168 f2fs_finish_read_bio+0x5c4/0xb80 f2fs_read_end_io+0x64c/0x708 bio_endio+0x85c/0x8c0 blk_update_request+0x690/0x127c scsi_end_request+0x9c/0xb8c scsi_io_completion+0xf0/0x250 scsi_finish_command+0x430/0x45c scsi_complete+0x178/0x6d4 blk_mq_complete_request+0xcc/0x104 scsi_done_internal+0x214/0x454 scsi_done+0x24/0x34which is similar to the problem reported by syzbot:https://syzkaller.appspot.com/bug?extid=3686758660f980b402dcThis case is consistent with the description in commit 9bf1a3f("f2fs: avoid GC causing encrypted file corrupted"):Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and afterbeing written it is marked as uptodate. Then, Page 1 is moved from blkaddrB to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated byra_data_block.There is no need to read Page 1 again from blkaddr B, since it has alreadybeen updated. Therefore, avoid initiating I/O in this case.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: core: Fix integer overflow in UNMAP bounds checksbc_execute_unmap() checks LBA + range does not exceed the device capacity,but does not guard against LBA + range wrapping around on 64-bit overflow.Add an overflow check matching the pattern already used for WRITE_SAME inthe same file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:platform/x86: dell-wmi-sysman: bound enumeration string aggregationpopulate_enum_data() aggregates firmware-provided value-modifierand possible-value strings into fixed 512-byte struct members.The current code bounds each individual source string but thenappends every string and separator with raw strcat() and noremaining-space check.Switch the aggregation loops to a bounded append helper andreject enumeration packages whose combined strings do not fitin the destination buffers.[ij: add include]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: terminate the cached volume label after UTF-8 conversionntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()and stores the result in sbi->volume.label. The converted label is laterexposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() onlyreturns the number of bytes written and does not add a trailing NUL.If the converted label fills the entire fixed buffer,ntfs3_label_show() can read past the end of sbi->volume.label whilelooking for a terminator.Terminate the cached label explicitly after a successful conversion andclamp the exact-full case to the last byte of the buffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:greybus: raw: fix use-after-free if write is called after disconnectIf a user writes to the chardev after disconnect has been called, thekernel panics with the following trace (withCONFIG_INIT_ON_FREE_DEFAULT_ON=y): BUG: kernel NULL pointer dereference, address: 0000000000000218 ... Call Trace: gb_operation_create_common+0x61/0x180 gb_operation_create_flags+0x28/0xa0 gb_operation_sync_timeout+0x6f/0x100 raw_write+0x7b/0xc7 [gb_raw] vfs_write+0xcf/0x420 ? task_mm_cid_work+0x136/0x220 ksys_write+0x63/0xe0 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7fDisconnect calls gb_connection_destroy, which ends up freeing theconnection object. When gb_operation_sync is called in the write fileoperations, its gets a freed connection as parameter and the kernelpanics.The gb_connection_destroy cannot be moved out of the disconnectfunction, as the Greybus subsystem expect all connections belonging to abundle to be destroyed when disconnect returns.To prevent this bug, use a rw lock to synchronize access between writeand disconnect. This guarantees that the write function doesn't tryto use a disconnected connection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:greybus: raw: fix use-after-free on cdev closeThis addresses a use-after-free bug when a raw bundle is disconnectedbut its chardev is still opened by an application. When the applicationreleases the cdev, it causes the following panic when init on free isenabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7fThe cdev is contained in the "gb_raw" structure, which is freed in thedisconnect operation. When the cdev is released at a later time,cdev_put gets an address that points to freed memory.To fix this use-after-free, convert the struct device from a pointer tobeing embedded, that makes the lifetime of the cdev and of this devicethe same. Then, use cdev_device_add, which guarantees that the devicewon't be released until all references to the cdev have been released.Finally, delegate the freeing of the structure to the device releasefunction, instead of freeing immediately in the disconnect callback.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix NULL deref in map_kptr_match_type for scalar regsCommit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with localkptr") refactored map_kptr_match_type() to branch on btf_is_kernel()before checking base_type(). A scalar register stored into a kptrslot has no btf, so the btf_is_kernel(reg->btf) call dereferencesNULL.Move the base_type() != PTR_TO_BTF_ID guard before any reg->btfaccess.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, sockmap: Fix af_unix iter deadlockbpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fastpath and the iter prog attempts to update a sockmap. Which ends up spinningat sock_map_update_elem()'s bh_lock_sock():WARNING: possible recursive locking detectedtest_progs/1393 is trying to acquire lock:ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0but task is already holding lock:ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); *** DEADLOCK *** May be due to missing lock nesting notation4 locks held by test_progs/1393: #0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0 #1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0 #2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 #3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00Call Trace: dump_stack_lvl+0x5d/0x80 print_deadlock_bug.cold+0xc0/0xce __lock_acquire+0x130f/0x2590 lock_acquire+0x14e/0x2b0 _raw_spin_lock+0x30/0x40 sock_map_update_elem+0xdb/0x1f0 bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4 bpf_iter_run_prog+0x5b9/0xb00 bpf_iter_unix_seq_show+0x1f7/0x2e0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:efi/capsule-loader: fix incorrect sizeof in phys array reallocationThe krealloc() call for cap_info->phys in __efi_capsule_setup_info() usessizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might becausing an undersized allocation.The allocation is also inconsistent with the initial array allocation inefi_capsule_open() that allocates one entry with sizeof(phys_addr_t),and the efi_capsule_write() function that stores phys_addr_t values (notpointers) via page_to_phys().On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), thisgoes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit butpointers are 32-bit, this allocates half the required space, which mightlead to a heap buffer overflow when storing physical addresses.This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader:fix incorrect allocation size") which fixed the same issue at the initialallocation site.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: prevent NULL pointer dereference during unmountWhen flushing out outstanding glock work during an unmount, gfs2_log_flush()can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdescis NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference ingfs2_log_flush") added a check for that to gfs2_log_flush() itself, but itmissed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable()In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read()in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hitNULL pointer while trying to access the mutex. We need the connector tobe set before that. Unlike in legacy cases with flag!DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialisedin bridge_attach(), so add the mhdp->connector_ptr in device structureto handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and!DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier toavoid possible NULL pointer dereference in recovery paths likemodeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm cache metadata: fix memory leak on metadata abort retryWhen failing to acquire the root_lock in dm_cache_metadata_abort becausethe block_manager is read-only, the temporary block_manager createdoutside the root_lock is not properly released, causing a memory leak.Reproduce steps:This can be reproduced by reloading a new table while the metadatais read-only. While the second call to dm_cache_metadata_abort iscaused by lack of support for table preload in dm-cache, mentionedin commit 9b1cc9f251af ("dm cache: share cache-metadata object acrossinactive and active DM tables"), it exposes the memory leak indm_cache_metadata_abort when the function is called multiple times.Specifically, dm-cache fails to sync the new cache object's mode duringpreresume, creating the reproducer condition.This issue could also occur through concurrent metadata_operation_failedcalls due to races in cache mode updates, but the table preload scenariobelow provides a reliable reproducer.1. Create a cache device with some faulty trailing metadata blocksdmsetup create cmeta <unreferenced object 0xffff8880080c2010 (size 16): comm "dmsetup", pid 132, jiffies 4294982580 hex dump (first 16 bytes): 00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ... backtrace (crc 3118f31c): kmemleak_alloc+0x28/0x40 __kmalloc_cache_noprof+0x3d9/0x510 dm_block_manager_create+0x51/0x140 dm_cache_metadata_abort+0x85/0x320 metadata_operation_failed+0x103/0x1e0 cache_preresume+0xacd/0xe70 dm_table_resume_targets+0xd3/0x320 __dm_resume+0x1b/0xf0 dm_resume+0x127/0x170
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm cache: fix dirty mapping checking in passthrough mode switchingAs mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadataobject across inactive and active DM tables"), dm-cache assumed tablereload occurs after suspension, while LVM's table preload breaks thisassumption. The dirty mapping check for passthrough mode was designedaround this assumption and is performed during table creation, causingthe check to fail with preload while metadata updates are ongoing. Thisrisks loading dirty mappings into passthrough mode, resulting in dataloss.Reproduce steps:1. Create a writeback cache with zero migration_threshold to produce dirty mappingsdmsetup create cmeta --table "0 8192 linear /dev/sdc 0"dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"dmsetup create corig --table "0 262144 linear /dev/sdc 262144"dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=directdmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \2 migration_threshold 0"2. Preload a table in passthrough modedmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"3. Write to the first cache block to make it dirtyfio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \--direct=1 --size=64k4. Resume the inactive table. Now it's possible to load the dirty block into passthrough mode.dmsetup resume cacheFix by moving the checks to the preresume phase to support tablepreloading. Also remove the unused function dm_cache_metadata_all_clean.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm cache: fix write hang in passthrough modeThe invalidate_remove() function has incomplete logic for handling writehit bios after cache invalidation. It sets up the remapping for theoverwrite_bio but then drops it immediately without submission, causingwrite operations to hang.Fix by adding a new invalidate_committed() continuation that submitsthe remapped writes to the cache origin after metadata commit completes,while using the overwrite_endio hook to ensure proper completionsequencing. This maintains existing coherency. Also improve errorhandling in invalidate_complete() to preserve the original error statusinstead of using bio_io_error() unconditionally.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm cache: fix null-deref with concurrent writes in passthrough modeIn passthrough mode, when dm-cache starts to invalidate a cacheentry and bio prison cell lock fails due to concurrent write tothe same cached block, mg->cell remains NULL. The error path ininvalidate_complete() attempts to unlock and free the cellunconditionally, causing a NULL pointer dereference:KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPTRIP: 0010:dm_cell_unlock_v2+0x3f/0x210Call Trace: invalidate_complete+0xef/0x430 map_bio+0x130f/0x1a10 cache_map+0x320/0x6b0 __map_bio+0x458/0x510 dm_submit_bio+0x40e/0x16d0 __submit_bio+0x419/0x870Reproduce steps:1. Create a cache devicedmsetup create cmeta --table "0 8192 linear /dev/sdc 0"dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"dmsetup create corig --table "0 262144 linear /dev/sdc 262144"dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=directdmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"2. Promote the first data block into cachefio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \--direct=1 --size=64k3. Reload the cache into passthrough modedmsetup suspend cachedmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"dmsetup resume cache4. Write to the first cached block concurrentlyfio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \--randrepeat=0 --direct=1 --numjobs=2 --size 64kFix by checking if mg->cell is valid before attempting to unlock it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/sun4i: backend: fix error pointer dereferenceThe function drm_atomic_get_plane_state() can return an error pointerand is not checked for it. Add error pointer check.Detected by Smatch:drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error:'plane_state' dereferencing possible ERR_PTR()
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net, bpf: fix null-ptr-deref in xdp_master_redirect() for down mastersyzkaller reported a kernel panic in bond_rr_gen_slave_id() reached viaxdp_master_redirect(). Full decoded trace: https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPUcounter that bonding only allocates in bond_open() when the mode isround-robin. If the bond device was never brought up, rr_tx_counterstays NULL.The XDP redirect path can still reach that code on a bond that wasnever opened: bpf_master_redirect_enabled_key is a global static key,so as soon as any bond device has native XDP attached, theXDP_TX -> xdp_master_redirect() interception is enabled for everyslave system-wide. The path xdp_master_redirect() ->bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->bond_rr_gen_slave_id() then runs against a bond that has norr_tx_counter and crashes.Fix this in the generic xdp_master_redirect() by refusing to call intothe master's ->ndo_xdp_get_xmit_slave() when the master device is notup. IFF_UP is only set after ->ndo_open() has successfully returned,so this reliably excludes masters whose XDP state has not been fullyinitialized. Drop the frame with XDP_ABORTED so the exception isvisible via trace_xdp_exception() rather than silently falling through.This is not specific to bonding: any current or future master thatdefers XDP state allocation to ->ndo_open() is protected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/rds: Restrict use of RDS/IB to the initial network namespacePrevent using RDS/IB in network namespaces other than the initial one.The existing RDS/IB code will not work properly in non-initial networknamespaces.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix RCU stall in bpf_fd_array_map_clear()Add a missing cond_resched() in bpf_fd_array_map_clear() loop.For PROG_ARRAY maps with many entries this loop callsprog_array_map_poke_run() per entry which can be expensive, andwithout yielding this can cause RCU stalls under load: rcu: Stack dump where RCU GP kthread last ran: CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef) Workqueue: events prog_array_map_clear_deferred RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246 Call Trace: prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096 __fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925 bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline] prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141 process_one_work+0x898/0x19d0 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x770/0x10b0 kernel/workqueue.c:3400 kthread+0x465/0x880 kernel/kthread.c:464 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bcmgenet: fix off-by-one in bcmgenet_put_txcbThe write_ptr points to the next open tx_cb. We want to return thetx_cb that gets rewinded, so we must rewind the pointer first thenreturn the tx_cb that it points to. That way the txcb can be correctlycleaned up.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected tobe freed eventually by mt76_mcu_skb_send_msg(). However, currently ifan intermediate function fails before sending, the allocated skb isleaked.Specifically, mt76_connac_mcu_sta_wed_update() andmt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memoryleak in the error path.Fix this by explicitly freeing the skb in these error paths.Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak onmt7996_mcu_sta_key_tlv error") made a similar change.Compile tested only. Issue found using a prototype static analysis tooland code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Do not allow deleting local storage in NMICurrently, local storage may deadlock when deferring freeing selem orlocal storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace()in NMI or reentrant. Since deleting selem in NMI is an unlikely usecase, partially mitigate it by returning error when calling frombpf_xxx_storage_delete() helpers in NMI. Note that, it is still possibleto deadlock through reentrant. A full mitigation requires returningerror when irqs_disabled() is true, which, however is too heavy-handedfor bpf_xxx_storage_delete().The long-term solution requires _nolock versions of call_rcu. Anotherpossible solution is to defer the free through irq_work [0], but itwould grow the size of selem, which is non-ideal.The check is only needed in bpf_selem_unlink(), which is used by helpersand syscalls. bpf_selem_unlink_nofail() is fine as it is called duringmap and owner tear down that never run in NMI or reentrant.[0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: test_run: Fix the null pointer dereference issue in bpf_lwt_xmit_push_encapThe bpf_lwt_xmit_push_encap helper needs to access skb_dst(skb)->dev tocalculate the needed headroom: err = skb_cow_head(skb, len + LL_RESERVED_SPACE(skb_dst(skb)->dev));But skb->_skb_refdst may not be initialized when the skb is set up bybpf_prog_test_run_skb function. Executing bpf_lwt_push_ip_encap functionin this scenario will trigger null pointer dereference, causing a kernelcrash as Yinhao reported:[ 105.186365] BUG: kernel NULL pointer dereference, address: 0000000000000000[ 105.186382] #PF: supervisor read access in kernel mode[ 105.186388] #PF: error_code(0x0000) - not-present page[ 105.186393] PGD 121d3d067 P4D 121d3d067 PUD 106c83067 PMD 0[ 105.186404] Oops: 0000 [#1] PREEMPT SMP NOPTI[ 105.186412] CPU: 3 PID: 3250 Comm: poc Kdump: loaded Not tainted 6.19.0-rc5 #1[ 105.186423] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[ 105.186427] RIP: 0010:bpf_lwt_push_ip_encap+0x1eb/0x520[ 105.186443] Code: 0f 84 de 01 00 00 0f b7 4a 04 66 85 c9 0f 85 47 01 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8b 73 58 48 83 e6 fe <48> 8b 36 0f b7 be ec 00 00 00 0f b7 b6 e6 00 00 00 01 fe 83 e6 f0[ 105.186449] RSP: 0018:ffffbb0e0387bc50 EFLAGS: 00010246[ 105.186455] RAX: 000000000000004e RBX: ffff94c74e036500 RCX: ffff94c74874da00[ 105.186460] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94c74e036500[ 105.186463] RBP: 0000000000000001 R08: 0000000000000002 R09: 0000000000000000[ 105.186467] R10: ffffbb0e0387bd50 R11: 0000000000000000 R12: ffffbb0e0387bc98[ 105.186471] R13: 0000000000000014 R14: 0000000000000000 R15: 0000000000000002[ 105.186484] FS: 00007f166aa4d680(0000) GS:ffff94c8b7780000(0000) knlGS:0000000000000000[ 105.186490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 105.186494] CR2: 0000000000000000 CR3: 000000015eade001 CR4: 0000000000770ee0[ 105.186499] PKRU: 55555554[ 105.186502] Call Trace:[ 105.186507] [ 105.186513] bpf_lwt_xmit_push_encap+0x2b/0x40[ 105.186522] bpf_prog_a75eaad51e517912+0x41/0x49[ 105.186536] ? kvm_clock_get_cycles+0x18/0x30[ 105.186547] ? ktime_get+0x3c/0xa0[ 105.186554] bpf_test_run+0x195/0x320[ 105.186563] ? bpf_test_run+0x10f/0x320[ 105.186579] bpf_prog_test_run_skb+0x2f5/0x4f0[ 105.186590] __sys_bpf+0x69c/0xa40[ 105.186603] __x64_sys_bpf+0x1e/0x30[ 105.186611] do_syscall_64+0x59/0x110[ 105.186620] entry_SYSCALL_64_after_hwframe+0x76/0xe0[ 105.186649] RIP: 0033:0x7f166a97455dTemporarily add the setting of skb->_skb_refdst before bpf_test_run to resolve the issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath11k: fix memory leaks in beacon template setupThe functions ath11k_mac_setup_bcn_tmpl_ema() andath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templatesbut fail to free it when parameter setup returns an error.Since beacon templates must be released during normal execution, theymust also be released in the error handling paths to prevent memoryleaks.Fix this by using unified exit paths with proper cleanup in the respectiveerror paths.Compile tested only. Issue found using a prototype static analysis tooland code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vdpa: use generic driver_override infrastructureWhen a driver is probed through __driver_attach(), the bus' match()callback is called without the device lock held, thus accessing thedriver_override field without a lock, which can cause a UAF.Fix this by using the driver-core driver_override infrastructure takingcare of proper locking internally.Note that calling match() from __driver_attach() without the device lockheld is intentional. [1]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: use generic driver_override infrastructureWhen a driver is probed through __driver_attach(), the bus' match()callback is called without the device lock held, thus accessing thedriver_override field without a lock, which can cause a UAF.Fix this by using the driver-core driver_override infrastructure takingcare of proper locking internally.Note that calling match() from __driver_attach() without the device lockheld is intentional. [1]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md: wake raid456 reshape waiters before suspendDuring raid456 reshape, direct IO across the reshape position can sleepin raid5_make_request() waiting for reshape progress while stillholding an active_io reference. If userspace then freezes reshape andwrites md/suspend_lo or md/suspend_hi, mddev_suspend() kills active_ioand waits for all in-flight IO to drain.This can deadlock: the IO needs reshape progress to continue, but thereshape thread is already frozen, so the active_io reference is neverdropped and suspend never completes.raid5_prepare_suspend() already wakes wait_for_reshape for dm-raid. Dothe same for normal md suspend when reshape is already interrupted, sowaiting raid456 IO can abort, drop its reference, and let suspendfinish.The mdadm test tests/25raid456-reshape-deadlock reproduces the hang.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-cgroup: fix disk reference leak in blkcg_maybe_throttle_current()Add the missing put_disk() on the error path inblkcg_maybe_throttle_current(). When blkcg lookup, blkg lookup, orblkg_tryget() fails, the function jumps to the out label which onlycalls rcu_read_unlock() but does not release the disk reference acquiredby blkcg_schedule_throttle() via get_device(). Since current->throttle_diskis already set to NULL before the lookup, blkcg_exit() cannot releasethis reference either, causing the disk to never be freed.Restore the reference release that was present as blk_put_queue() in theoriginal code but was inadvertently dropped during the conversion fromrequest_queue to gendisk.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drbd: Balance RCU calls in drbd_adm_dump_devices()Make drbd_adm_dump_devices() call rcu_read_lock() beforercu_read_unlock() is called. This has been detected by the Clangthread-safety analyzer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/mbcache: cancel shrink work before destroying the cachemb_cache_destroy() calls shrinker_free() and then frees all cacheentries and the cache itself, but it does not cancel the pendingc_shrink_work work item first.If mb_cache_entry_create() schedules c_shrink_work via schedule_work()and the work item is still pending or running when mb_cache_destroy()runs, mb_cache_shrink_worker() will access the cache after its memoryhas been freed, causing a use-after-free.This is only reachable by a privileged user (root or CAP_SYS_ADMIN)who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem.Cancel the work item with cancel_work_sync() before callingshrinker_free(), ensuring the worker has finished and will not berescheduled before the cache is torn down.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_STARTomfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE),but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440).Later, omfs_make_empty() uses sbi->s_sys_blocksize - OMFS_DIR_STARTas the length argument to memset(). Since s_sys_blocksize is u32,a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causesan unsigned underflow there, wrapping to a value near 2^32. That drivesa ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernelmemory far beyond the backing block buffer.Add the corresponding lower-bound check alongside the existing upper-boundcheck in omfs_fill_super(), so that malformed images are rejected duringsuperblock validation before any filesystem data is processed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: fix potential unbounded skb queuevirtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc.virtio_transport_recv_enqueue() skips coalescing for packetswith VIRTIO_VSOCK_SEQ_EOM.If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM,a very large number of packets can be queuedbecause vvs->rx_bytes stays at 0.Fix this by estimating the skb metadata size: (Number of skbs in the queue) * SKB_TRUESIZE(0)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs[Why & How]dp_sdp_message_debugfs_write() dereferences connector->base.state->crtcwithout checking for NULL. A connector can be connected but not bound toany CRTC (e.g. after hot-plug before the next atomic commit), causing akernel crash when writing to the sdp_message debugfs node.The function also ignores the user-provided size argument and alwayspasses 36 bytes to copy_from_user(), reading past the user buffer whensize < 36.Fix both issues by:- Returning -ENODEV when connector->base.state or state->crtc is NULL- Clamping write_size to min(size, sizeof(data))(cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Bound VBIOS record-chain walk loops[Why & How]All record-chain walk loops in bios_parser.c and bios_parser2.c usefor(;;) and only terminate on a 0xFF record_type sentinel or zerorecord_size. A malformed VBIOS image missing the terminator recordcauses unbounded iteration at probe time, potentially hundreds ofthousands of iterations with record_size=1. In the final iterationsnear the BIOS image boundary, struct casts beyond the 2-byte headervalidated by GET_IMAGE can also read out of bounds.Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256)iterations. The atombios.h defines up to 22 distinct record typesand atomfirmware.h has 13. Assuming an average of less than 10records per type (which is reasonable since most are connector-based) 256 is a generous upper bound.(cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/v3d: Skip CSD when it has zeroed workgroupsA compute shader dispatch encodes its workgroup counts in the CFG0..CFG2registers. Kicking off a dispatch with a zero count in any of the threedimensions is invalid. First, the hardware will process 0 as 65536,while the user-space driver exposes a maximum of 65535. Over that, asubmission with a zeroed workgroup dimension should be a no-op.These zeroed counts can reach the dispatch path through an indirect CSDjob, whose workgroup counts are only known once the indirect buffer isread and may legitimately be zero, but such scenario should only result ina no-op.Overwrite the indirect CSD job workgroup counts with the indirect BOones, even if they are zeroed, and don't submit the job to the hardwarewhen any of the workgroup counts is zero, so the job completes immediatelyinstead of running the shader.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11The v11 MQD manager incorrectly assigned the CP-compute variants ofcheckpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functionsuse sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(structv11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.During CRIU checkpoint of an SDMA queue on Navi3x:- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer, leaking 1536 bytes of adjacent GTT memory to userspaceDuring CRIU restore:- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer, corrupting 1536 bytes of adjacent GTT memory (often the ring buffer or neighboring MQDs)This is a copy-paste regression unique to v11. All other ASIC backends(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properlyhandle the smaller v11_sdma_mqd structure, matching the pattern used inother MQD managers.(cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: fix NULL dereference in get_queue_ids()When usr_queue_id_array is NULL and num_queues is non-zero,get_queue_ids() returns NULL. The callers check only IS_ERR() on thereturn value; since IS_ERR(NULL) == false the check passes, andsuspend_queues() calls q_array_invalidate() which immediatelydereferences NULL while iterating num_queues times.Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplyingnum_queues > 0 with a zero queue_array_ptr, causing a kernel panic.A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op(q_array_invalidate never executes, and resume_queues already guardsall queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)only when num_queues is non-zero and the pointer is absent; both callersalready propagate IS_ERR() returns correctly to userspace.(cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: Validate XDomain request packet size before type casttb_xdp_handle_request() casts the received packet buffer toprotocol-specific structs without verifying that the allocationis large enough for the target type. A peer can send a minimalXDomain packet that passes the generic header length check but isshorter than the struct accessed after the cast, causing out-of-bounds reads from the kmemdup allocation.Plumb the packet length through xdomain_request_work and validateit against the expected struct size before each cast.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: Bound root directory content to block size__tb_property_parse_dir() does not check that content_offset +content_len fits within block_len for the root directory case.When rootdir->length equals or exceeds block_len - 2, the entryloop reads past the allocated property block.Add a bounds check after computing content_offset and content_lento reject directories whose content extends past the block.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix the ACK parser to extract the SACK table for parsingFix modification of the received skbuff in rxrpc_input_soft_acks() and apotential incorrect access of the buffer in a fragmented UDP packet (thepacket would probably have to be deliberately pre-generated as fragmented)when AF_RXRPC tries to extract the contents of the SACK table by copyingout the contents of the SACK table into a buffer before attempting to parseAF_RXRPC assumes that it can just call skb_condense() and then validlyaccess the SACK table from skb->data and that it will be a flat buffer -but skb_condense() can silently fail to do anything under somecircumstances.Note that whilst rxrpc_input_soft_acks() should be able to parse extendedACKs, the rest of AF_RXRPC doesn't currently support that.Further, there's then no need to call skb_condense() in rxrpc_input_ack(),so don't.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/hugetlb: restore reservation on error in hugetlb folio copy pathsTwo sites in mm/hugetlb.c allocate a hugetlb folio viaalloc_hugetlb_folio() (consuming a VMA reservation) and then callcopy_user_large_folio(), which became int-returning in commit 1cb9dc4b475c("mm: hwpoison: support recovery from HugePage copy-on-write faults") andcan now fail (e.g. -EHWPOISON on a hwpoisoned source page). On thefailure path, folio_put() restores the global hugetlb pool count throughfree_huge_folio(), but the per-VMA reservation map entry is left markedconsumed: - hugetlb_mfill_atomic_pte() resubmission path (UFFDIO_COPY) - copy_hugetlb_page_range() fork-time CoW path when hugetlb_try_dup_anon_rmap() fails (rare: pinned hugetlb anon folio under fork)User-visible effect: on UFFDIO_COPY into a private hugetlb VMA where theresubmission copy fails, the reservation for that address is leaked fromthe VMA's reserve map. A subsequent fault at the same address takes theno-reservation path, and under hugetlb pool pressure the task is SIGBUSedat an address it had previously reserved. The fork-time CoW path leaksthe same way in the child VMA's reserve map, though it requires the muchrarer combination of pinned hugetlb anon page + hwpoisoned source.Add the missing restore_reserve_on_error() call before folio_put() on botherror paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmem: core: fix use-after-free bugs in error pathsFix several instances of error paths in which we call__nvmem_device_put() - which may end up freeing the underlying memoryand other resources - and then keep on using the nvmem structure. Alwaysput the reference to the nvmem device as the last step before returningthe error code.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: phonet: free phonet_device after RCU grace periodphonet_device_destroy() removes a phonet_device from the per-net devicelist with list_del_rcu(), but frees it immediately. RCU readers walkingthe same list can still hold a pointer to the object after it has beenremoved, leading to a slab-use-after-free.Use kfree_rcu(), matching the lifetime rule already used byphonet_address_del() for the same object type.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:misc: fastrpc: fix DMA address corruption due to find_vma misusefastrpc_get_args() uses find_vma() to look up the VMA for a user-providedpointer and compute a DMA address offset. When the address falls in a gapbefore the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,corrupting the DMA address sent to the DSP.Replace find_vma() with vma_lookup(), which returns NULL when the addressis not contained within any VMA.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:misc: fastrpc: fix use-after-free race in fastrpc_map_createfastrpc_map_lookup returns a raw pointer after releasing fl->lock. Thecaller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero)on this unprotected pointer. A concurrent MEM_UNMAP can free the mapbetween the lock release and the kref operation, resulting in ause-after-free on the freed slab object.Restore the take_ref parameter to fastrpc_map_lookup so the referenceis acquired atomically under fl->lock before the pointer is exposed tothe caller.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:misc: fastrpc: fix use-after-free of fastrpc_user in workqueue contextThere is a race between fastrpc_device_release() and the workqueuethat processes DSP responses. When the user closes the file descriptor,fastrpc_device_release() frees the fastrpc_user structure. Concurrently,an in-flight DSP invocation can complete and fastrpc_rpmsg_callback()schedules context cleanup via schedule_work(&ctx->put_work). If theworkqueue runs fastrpc_context_free() in parallel with or afterfastrpc_device_release() has freed the user structure, it dereferencesthe freed fastrpc_user. Depending on the state of the context at thetime of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list.The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388Add kref-based reference counting to fastrpc_user. Have each invokecontext take a reference on the user at allocation time and release itwhen the context is freed. Release the initial reference infastrpc_device_release() at file close. Move the teardown of the userstructure - freeing pending contexts, maps, mmaps, and the channelcontext reference - into the kref release callback fastrpc_user_free(),so that it runs only when the last reference is dropped, regardless ofwhether that happens at device close or after the final in-flightcontext completes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:locking/rtmutex: Skip remove_waiter() when waiter is not enqueuedsyzbot triggered the following splat in remove_waiter() viaFUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task insteadof current in remove_waiter()") made this fatal.Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlockreturn correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check toaccount for try_to_take_rt_mutex().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate foliosFUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folioscan contain uninitialized data.Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is alreadyin the page cache and not wait for data from the FUSE daemon, treat!uptodate folios as if they weren't present.This only has security impact on systems that don't enable automaticzero-initialization of all page allocations viaCONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fuse: reject fuse_notify() pagecache ops on directoriesThe operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow theFUSE daemon to actively write/read pagecache contents.For directories with FOPEN_CACHE_DIR, the pagecache is used askernel-internal cache storage, and userspace is not supposed to havedirect access to this cache - in particular, fuse_parse_cache() will hitWARN_ON() if the cache contains bogus data.Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other thanregular files with -EINVAL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix buffer over-read in rtw_update_protectionrtw_update_protection() is called with a pointer offset into theies buffer but the full ie_length is passed, causing a potentialbuffer over-read.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/vmci: fix sk_ack_backlog leak on failed handshakeWhen vmci_transport_recv_connecting_server() returns an error,vmci_transport_recv_listen() calls vsock_remove_pending() but nevercalls sk_acceptq_removed(). This leaves sk_ack_backlog incrementedpermanently.Repeated handshake failures (malformed packets, queue pair allocfailure, event subscribe failure) cause sk_ack_backlog to climbtoward sk_max_ack_backlog. Once it reaches the limit the listenerpermanently refuses all new connections with -ECONNREFUSED, asilent denial of service requiring a process restart to recover.The two existing sk_acceptq_removed() calls in af_vsock.c do notcover this path: line 764 checks vsock_is_pending() which returnsfalse after vsock_remove_pending(), and line 1889 is only reachedon successful accept().Fix by balancing sk_acceptq_added() with sk_acceptq_removed() onthe error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: allow subflow rcv wnd to shrinkIn MPTCP connection, the `window` field in the TCP header refers to theMPTCP-level rcv_nxt and it's right edge should not move backward. Suchconstraint is enforced at DSS option generation time.At the same time, the TCP stack ensures independently that the TCP-levelrcv wnd right's edge does not move backward. That in turn causes artificialinflating of the MPTCP rcv window when the incoming data is acked at theTCP level and is OoO in the MPTCP sequence space (or lands in the backlog).As a consequence, the incoming traffic can exceed the receiver rcvbuf sizeeven when the sender is not misbehaving.Prevent such scenario forcibly allowing the TCP subflow to shrink theTCP-level rcv wnd regardless of the current netns setting.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udp: clear skb->dev before running a sockmap verdictOn the UDP receive path skb->dev is repurposed as dev_scratch (thetruesize/state cache set by udp_set_dev_scratch()), through theunion { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.When a UDP socket is in a sockmap, sk_data_ready issk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,bpf_skc_lookup_tcp), bpf_skc_lookup() does: if (skb->dev) caller_net = dev_net(skb->dev);skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()dereferences it as a struct net_device * and the kernel takes a generalprotection fault on a non-canonical address in softirq: Oops: general protection fault, probably for non-canonical address 0x1010000800004a0 CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full) RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline] RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047 Call Trace: bpf_prog_4675cb904b7071f8+0x12e/0x14e bpf_prog_run_pin_on_cpu+0xc6/0x1f0 sk_psock_verdict_recv+0x1ba/0x350 udp_read_skb+0x31a/0x370 sk_psock_verdict_data_ready+0x2e3/0x600 __udp_enqueue_schedule_skb+0x4c8/0x650 udpv6_queue_rcv_one_skb+0x3ec/0x740 udp6_unicast_rcv_skb+0x11d/0x140 ip6_protocol_deliver_rcu+0x61e/0x950 ip6_input_finish+0xa9/0x150 NF_HOOK+0x286/0x2f0 ip6_input+0x117/0x220 NF_HOOK+0x286/0x2f0 __netif_receive_skb+0x85/0x200 process_backlog+0x374/0x9a0 __napi_poll+0x4f/0x1c0 net_rx_action+0x3b0/0x770 handle_softirqs+0x15a/0x460 do_softirq+0x57/0x80 The rmem charge that dev_scratch accounted for is released by skb_recv_udp() ondequeue, just above, so the scratch is dead by the time recv_actor() runs. Clearskb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), whichskb_set_owner_sk_safe() set just above.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:zram: fix use-after-free in zram_bvec_write_partial()zram_read_page() picks the sync or async backing device read path based onwhether the parent bio is NULL. zram_bvec_write_partial() passes itsparent bio down, so for ZRAM_WB slots the read is dispatchedasynchronously and zram_read_page() returns 0 while the bio is still inflight. The caller then runs memcpy_from_bvec(), zram_write_page() and__free_page() on the buffer, leaving the async read to write into a freedpage.zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d("zram: fix synchronous reads") for the same reason; the write_partialcounterpart was missed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait()dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first()which does cursor->chain = dma_fence_get(head), taking an extrareference. On normal loop completion, dma_fence_unwrap_next()releases this via dma_fence_chain_walk() -> dma_fence_put().When virtio_gpu_do_fence_wait() fails and the function returns earlyfrom inside the loop, the cursor->chain reference is never released.This is the only caller in the entire kernel that does an early returninside dma_fence_unwrap_for_each.Add dma_fence_put(itr.chain) before the early return.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCELA deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work onconn->async_requests via setup_async_work(), with cancel_fn =smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock.When the request is cancelled, the worker frees the file_lock withlocks_free_lock() and takes the cancelled early-exit, which "goto out"s and neverreaches release_async_work() -- the only site that unlinks the work fromconn->async_requests and clears cancel_fn/cancel_argv. The work therefore staysmatchable on async_requests with a live cancel_fn pointing at the freed file_lock,until connection teardown finally runs release_async_work().smb2_cancel() fires cancel_fn unconditionally with no state guard, so a secondSMB2_CANCEL for the same AsyncId, arriving in that window, re-runssmb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (cancelled branch) ... cache file_lock_cache of size 192Reproduced on mainline with KASAN by an authenticated SMB client.Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callbackcannot be fired a second time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hv_netvsc: use kmap_local_page in netvsc_copy_to_send_bufnetvsc_copy_to_send_buf() copies page buffer entries into the VMBussend buffer using phys_to_virt() on the entry PFN. Entries for theRNDIS header and the skb linear data come from kmalloc'd memory andare always in the kernel direct map, but entries for skb fragmentsreference page cache or user pages, which on 32-bit x86 withCONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a pagephys_to_virt() returns an address outside the direct map and thesubsequent memcpy() faults on the transmit softirq path, which isfatal.Map the pages with kmap_local_page() instead, handling two propertiesof the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries.The copy path only handles packets smaller than the send section size(6144 bytes by default); larger packets take the cp_partial path whereonly the RNDIS header is copied. So entries here are bounded by thesection size and a copy is split at most once on 4K-page systems. On!CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() andno mapping work is added.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_sync: reject oversized Broadcast Announcement prependExisting advertising instances can already hold the maximum extendedadvertising payload. When hci_adv_bcast_annoucement() prepends theBroadcast Announcement service data to that payload, the combined datamay no longer fit in the temporary buffer used to rebuild theadvertising data.Reject that case before copying the existing payload and report thefailure through the device log. This keeps the existing advertisingdata intact and avoids overrunning the temporary buffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_tunnel: fix use-after-free on object destroynft_tunnel_obj_destroy() calls metadata_dst_free() which directlykfree()s the metadata_dst, ignoring the dst_entry refcount. Packetsthat took a reference via dst_hold() in nft_tunnel_obj_eval() andare still queued (e.g. in a netem qdisc) are left with a danglingpointer. When these packets are eventually dequeued, dst_release()operates on freed memory.Replace metadata_dst_free() with dst_release() so the metadata_dstis freed only after all references are dropped. The dst subsystemalready handles metadata_dst cleanup in dst_destroy() whenDST_METADATA is set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/vc4: fix krealloc() memory leakDon't just overwrite the original pointer passed to krealloc()with its return value without checking latter: MEM = krealloc(MEM, SZ, GFP);If krealloc() returns NULL, that erases the pointerto the still allocated memory, hence leaks this memory.Instead, use a temporary variable, check it's not NULLand only then assign it to the original pointer: TMP = krealloc(MEM, SZ, GFP); if (!TMP) return; MEM = TMP;While on it, use krealloc_array().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_exthdr: fix register tracking for F_PRESENT flagnft_exthdr_init() passes user-controlled priv->len tonft_parse_register_store(), which marks that many bytes in theregister bitmap as initialized. However, when NFT_EXTHDR_F_PRESENTis set, the eval paths write only 1 byte (nft_reg_store8) or4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,registers beyond the first are never written, retaininguninitialized stack data from nft_regs.Bail out if userspace requests too much data when F_PRESENT is set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: x_tables: avoid leaking percpu counter pointersThe native and compat get-entries paths copy the fixed rule entry headerfrom the kernelized rule blob to userspace before overwriting the entry'scounter fields with a sanitized counter snapshot.On SMP kernels, entry->counters.pcnt contains the percpu allocationaddress used by x_tables rule counters. A caller can provide a userspacebuffer that faults during the initial fixed-header copy after pcnt hasbeen copied but before the later sanitized counter copy runs. The syscallthen returns -EFAULT while leaving the raw percpu pointer in userspace.Copy only the fixed entry prefix before counters from the kernelized ruleblob, then copy the sanitized counter snapshot into the counter field.Apply this ordering to the IPv4, IPv6, and ARP native and compatget-entries implementations so a fault cannot expose the internal percpucounter pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: revalidate bridge portsebt_redirect_tg() dereferences br_port_get_rcu() return without aNULL check, causing a kernel panic when the bridge port has beenremoved between the original hook invocation and an NFQUEUEreinject.A mere NULL check isn't sufficient, however. As sashiko reviewpoints out userspace can not only remove the port from the bridge,it could also place the device in a different virtual device, e.g.macvlan.If this happens, we must drop the packet, there is no way for us toreinject it into the bridge path.Switch to _upper API, we don't need the bridge port structure.Also, this fix keeps another bug intact:Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTERtoo aggressive, which prevents certain logging features when queueingin bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the oldCONFIG_BRIDGE_NETFILTER cruft is off.Fixes tag is a common ancestor, this was always broken.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()In vti6_tnl_lookup(), when an exact match for a tunnel fails,the code falls back to searching for wildcard tunnels:- Tunnels matching the packet's local address, with any remote address wildcard remote).- Tunnels matching the packet's remote address, with any local address (wildcard local).However, vti6 stores all these different types of tunnels in the samehash table (ip6n->tnls_r_l) prone to hash collisions.The bug is that the fallback search loops in vti6_tnl_lookup() weremissing checks to ensure that the candidate tunnel actually hasa wildcard address.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: guard timestamp cmsgs to real error queue skbsskb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skbfrom sk_error_queue. That assumption is not true for AF_PACKET sockets:outgoing packet taps are also delivered to packet sockets withskb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKETinstead of struct sock_exterr_skb.If such an skb is received with timestamping enabled, the generictimestamp cmsg path can read AF_PACKET control-buffer state assock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet dropcounter overlaps opt_stats. An odd drop count makes the path emitSCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linearskbs this copies past the linear head and can trigger hardened usercopy ordisclose adjacent heap contents.Keep skb_is_err_queue() local to net/socket.c, but make it verify thatthe PACKET_OUTGOING marker is paired with the sock_rmem_free destructorinstalled by sock_queue_err_skb(). AF_PACKET receive skbs use normalreceive ownership and no longer pass as error-queue skbs, while legitimatesk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_freeownership.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: rockchip: fix generic IRQ chip leak on removeThe driver allocates domain generic chips usingirq_alloc_domain_generic_chips() during probe. However, on driverremove/teardown, the generic chips are not automatically freed when theIRQ domain is removed because the domain flags do not includeIRQ_DOMAIN_FLAG_DESTROY_GC.This causes both the domain generic chips structure and the associatedgeneric chips to be leaked. Additionally, the generic chips remain onthe global gc_list and may later be visited by generic IRQ chip suspend,resume, or shutdown callbacks after the GPIO bank has been removed,potentially resulting in a use-after-free and kernel crash.Fix the resource leak by explicitly callingirq_domain_remove_generic_chips() before removing the IRQ domain inrockchip_gpio_remove().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: openvswitch: fix possible kfree_skb of ERR_PTRAfter the patch in the "Fixes" tag, the allocation of the "reply" skbcan happen either before or after locking the ovs_mutex.However, error cleanups still follow the classical reversed order,assuming "reply" is allocated before locking: it is freed after unlocking.If "reply" allocation happens after locking the mutex and it fails,"reply" is left with an ERR_PTR, and execution jumps to the correspondentcleanup stage which will try to free an invalid pointer.Fix this by setting the pointer to NULL after having saved its errorvalue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: sit: reload inner IPv6 header after GSO offloadsipip6_tunnel_xmit() caches the inner IPv6 header pointer at functionentry and continues using it after iptunnel_handle_offloads().For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().When the skb header is cloned, skb_header_unclone() can callpskb_expand_head(), which may move the skb head. The pskb_expand_head()contract requires pointers into the skb header to be reloaded after thecall.If the later skb_realloc_headroom() branch is not taken, SIT uses thestale iph6 pointer to read the inner hop limit and DS field. That canread from a freed skb head after the old head's remaining clone isreleased.Reload iph6 after the offload helper succeeds and before subsequentreads from the inner IPv6 header. Keep the existing reload afterskb_realloc_headroom(), since that branch can also replace the skb.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failureIn the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()returns false (e.g. XDPSQ is full), the function returns withoutunmapping the DMA address or freeing the xdp_frame allocated byxdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens onsuccess, so the completion path cannot recover these entries.With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind: DMA-API: pci 0000:08:00.0: device driver has pending DMA allocations while released from device [count=1116] One of leaked entries details: [device address=0x000000010ffd7028] [size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy] WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180 ... DMA-API: Mapped at: debug_dma_map_phys+0x4b/0xd0 dma_map_phys+0xfd/0x2d0 mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core] mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core] mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]Add the missing unmap + xdp_return_frame, matching the cleanup alreadydone in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,so no per-frag unmap is needed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_listmlx5_query_nic_vport_mac_list() sizes its firmware command buffer usingthe PF's log_max_current_uc/mc_list capabilities. When querying a VFvport with a larger configured max (via devlink), the firmware responsecan overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 Fix by querying the vport's own HCA caps to size the buffer correctly.Refactor the function to allocate and return the MAC list internally,removing the caller's dependency on knowing the correct max.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: phy: clean the sfp upstream if phy probing failsSashiko reported that we don't call sfp_bus_del_upstream() in the probefailure path, so let's add it, otherwise the sfp-bus is left with adangling 'upstream' field, that may be used later on during SFP events.This issue existed before the generic phylib sfp support, back whendrivers were calling phy_sfp_probe themselves.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: mvebu: fix NULL pointer dereference in suspend/resumemvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIObanks during suspend/resume, but not all banks have PWM functionality.GPIO banks without PWM have mvchip->mvpwm set to NULL.Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointerdereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [] lr : [] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54Add a NULL check for mvchip->mvpwm before calling the PWMsuspend/resume functions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()Fix the race by pruning the bin while still holding xfrm_policy_lock,before dropping it. Use __xfrm_policy_inexact_prune_bin() directly sincethe lock is already held. The wrapper xfrm_policy_inexact_prune_bin()becomes unused and is removed.Race: CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO) ========================== ========================== xfrm_policy_bysel_ctx(): spin_lock_bh(xfrm_policy_lock) bin = xfrm_policy_inexact_lookup() __xfrm_policy_unlink(pol) spin_unlock_bh(xfrm_policy_lock) xfrm_policy_kill(ret) // wide window, lock not held xfrm_hash_rebuild(): spin_lock_bh(xfrm_policy_lock) __xfrm_policy_inexact_flush(): kfree_rcu(bin) // bin freed spin_unlock_bh(xfrm_policy_lock) xfrm_policy_inexact_prune_bin(bin) // UAF: bin is freed
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streamssnd_pcm_drain() uses init_waitqueue_entry which does not clearentry.prev/next, and add_wait_queue with a conditionalremove_wait_queue that is skipped when to_check is no longerin the group after concurrent UNLINK. The orphaned wait entryremains on the unlinked substream sleep queue. On the nextdrain iteration, add_wait_queue adds the entry to a new queuewhile still linked on the old one, corrupting both lists. Asubsequent wake_up dereferences NULL at the func pointer(mapped from the spinlock at offset 0 of the misinterpretedwait_queue_head_t), causing a kernel panic.Replace init_waitqueue_entry/add_wait_queue/conditionalremove_wait_queue with init_wait_entry/prepare_to_wait/finish_wait. init_wait_entry clears prev/next viaINIT_LIST_HEAD on each iteration and setsautoremove_wake_function which auto-removes the entry onwake-up. finish_wait safely handles both the already-removedand still-queued cases.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattrIn mrp_pdu_parse_vecattr(), vector attribute events are encoded threeper byte and valen tracks the number of events left to process.The parser decrements valen after processing the first and second eventsfrom each event byte, but not after processing the third one. When valenis exactly a multiple of three, the loop continues after the last validevent and consumes the next byte as a new event byte, applying aspurious event to the MRP applicant state.Additionally, when valen is zero the parser unconditionally consumesattrlen bytes as FirstValue and advances the offset, even though perIEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen ofzero and no FirstValue or Vector fields. This corrupts the offset forsubsequent PDU parsing.Also, when valen exceeds three the loop crosses byte boundaries butthe attribute value is not incremented between the last event of onebyte and the first event of the next. This causes the first event ofthe next byte to use the same attribute value as the third eventrather than the next consecutive value.Decrement valen after processing the third event, skip FirstValueconsumption when valen is zero, and increment the attribute value atthe end of each loop iteration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardownmtk_free_dev() calls metadata_dst_free() which frees the metadata_dstwith kfree() immediately, bypassing the RCU grace period.In the RX path, skb_dst_set_noref() sets a non-refcounted pointer fromthe skb to the metadata_dst. This function requires RCU read-sideprotection and the dst must remain valid until all RCU readers complete.Since metadata_dst_free() calls kfree() directly, a use-after-free canoccur if any skb still holds a noref pointer to the dst when the drivertears it down.Replace metadata_dst_free() with dst_release() which properly goesthrough the refcount path: when the refcount drops to zero, it schedulesthe actual free via call_rcu_hurry(), ensuring all RCU readers havecompleted before the memory is freed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: fix memory leak in error path of hci_alloc_dev()Early failures in Bluetooth HCI UART configuration leak SRCU percpumemory.When device initialization fails before hci_register_dev() completes,the HCI_UNREGISTER flag is never set. As a result, when the devicereference count reaches zero, bt_host_release() evaluates this flag asfalse and falls back to a direct kfree(hdev).Because hci_release_dev() is bypassed, the SRCU struct initializedearly in hci_alloc_dev() is never cleaned up, resulting in a leak ofpercpu memory.Fix the leak by explicitly calling cleanup_srcu_struct() in thefallback (unregistered) branch of bt_host_release() before freeingthe device.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: validate advertising TLV before type checkstlv_data_is_valid() reads each advertising data field length fromdata[i], then inspects data[i + 1] for managed EIR types beforechecking that the current field still fits inside the supplied buffer.A malformed field whose length byte is the last byte of the buffer cantherefore make the parser read one byte past the advertising data.KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISINGrequest reached that path: BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid() Read of size 1 Call trace: tlv_data_is_valid() add_advertising() hci_mgmt_cmd() hci_sock_sendmsg()Move the existing element-length check before any type-octet inspectionso each non-empty element is proven to contain its type byte before theparser looks at data[i + 1].
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: fix leak if split 6 GHz scanning failsrdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it'ssupposed to be released at ___cfg80211_scan_done() but this doesn't happenas rdev->scan_req is NULL at that point, too, leading to the early returnfrom the freeing function.unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0Found by Linux Verification Center (linuxtesting.org).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:devlink: Release nested relation on devlink freedevlink relation state is normally released from devl_unregister(), whichcalls devlink_rel_put(). This misses devlink instances that get a nestedrelation before registration and then fail probe before devl_register() isreached.That flow can happen for SFs. The child devlink gets linked to itsparent before registration, then a later probe error calls devlink_free()directly. Since the instance was never registered, devl_unregister() is notcalled and devlink->rel is leaked.Release any pending relation from devlink_free() as well. The registeredpath is unchanged because devl_unregister() already clears devlink->relbefore devlink_free() runs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:6lowpan: fix off-by-one in multicast context address compressionThe second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses&data[1] as destination and &ipaddr->s6_addr[11] as source, butboth should be offset by one: &data[2] and &ipaddr->s6_addr[12]respectively.This off-by-one has two consequences:1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contentsThe correct inline data layout must match what the decompressionfunction lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID)Also zero-initialize the data array as a defensive measure againstsimilar bugs in the future.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: conntrack_irc: fix possible out-of-bounds readWhen parsing fails after we've matched the command string weshould bail out instead of trying to match a different command.This helper should be deprecated, given prevalence of TLS I doubt it hasany relevance in 2026.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipvs: clear the svc scheduler ptr early on editip_vs_edit_service() while unbinding the old scheduler clearsthe svc->scheduler ptr after the scheduler module initiatesRCU callbacks. This can cause packets to use the oldscheduler at the time when svc->sched_data is already freedafter RCU grace period.Fix it by clearing the ptr early in ip_vs_unbind_scheduler(),before the done_service method schedules any RCU callbacks.Also, if the new scheduler fails to initialize when replacingthe old scheduler, try to restore the old scheduler while stillreturning the error code.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tee: optee: prevent use-after-free when the client exits before the supplicantCommit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made theclient wait as killable so it can be interrupted during shutdown orafter a supplicant crash. This changes the original lifetime expectations:the client task can now terminate while the supplicant is still processingits request.If the client exits first it removes the request from its queue andkfree()s it, while the request ID remains in supp->idr. A subsequentlookup on the supplicant path then dereferences freed memory, leading toa use-after-free.Serialise access to the request with supp->mutex: * Hold supp->mutex in optee_supp_recv() and optee_supp_send() while looking up and touching the request. * Let optee_supp_thrd_req() notice that the client has terminated and signal optee_supp_send() accordingly.With these changes the request cannot be freed while the supplicant stillhas a reference, eliminating the race.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoSA logic flaw in __smc_setsockopt() allows a local unprivileged user tocause a Denial of Service (DoS) by holding the socket lock indefinitely.The function __smc_setsockopt() calls copy_from_sockptr() while holdinglock_sock(sk). By passing a userfaultfd-monitored memory page (orFUSE-backed memory on systems where unprivileged userfaultfd is disabled)as the optval, an attacker can halt execution during the copy operation,keeping the lock held.Combined with asynchronous tear-down operations like shutdown(), thisexhausts the kernel wq (kworkers) and triggers the hung task watchdog.[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.[ 240.123489] Call Trace:[ 240.123501] smc_shutdown+...[ 240.123512] lock_sock_nested+...This patch moves the user-space copy outside the lock_sock() criticalsection to prevent the issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/gma500/oaktrail_lvds: fix hang on init failureThe LVDS init code looks up an I2C adapter using i2c_get_adapter() andtries to read the EDID before falling back to allocating and registeringits own adapter.The error handling does not separate these cases so on a late initfailure it will try to deregister and free also an adapter that hadpreviously been registered. Since i2c_get_adapter() takes anotherreference to the adapter, deregistration hangs indefinitely whilewaiting for the reference to be released.Fix this by only destroying adapters allocated during LVDS init onerrors.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Avoid NULL pointer dereference or refcount corruptionCommit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")fixed a NULL pointer dereference in an unlikely situation partly.If dev_pasid is not found in the dev_pasids list, it remains NULL.However, the teardown operations are executed unconditionally, this leadto a NULL pointer dereference or refcount corruption.If the domain was never attached to this IOMMU, info will be NULL, whichwould cause an immediate dereference when checking --info->refcnt.Even if info is not NULL, decrementing the refcount without having removeda valid PASID might unbalance the count. This could lead to prematuredropping of the refcount to 0, potentially causing a use-after-free for theremaining active devices sharing the domain.Fix it by returning early if dev_pasid is NULL, before executing theteardown operations.Issue found by AI review and suggested by Kevin Tian.https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED[Why]dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() withDC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),which disables local softirqs.The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() toallocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,which calls BUG_ON(in_interrupt()) because it's invoked within theFPU-enabled (softirq disabled) region, leading to a kernel crash.[How]Wrap the dc_state_create_phantom_plane() call with theDC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption duringthis memory allocation.(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:audit: fix incorrect inheritable capability in CAPSET records__audit_log_capset() records the effective capability set into theinheritable field due to a copy-paste error. Every CAPSET auditrecord therefore reports cap_pi (process inheritable) with the valueof cap_effective instead of cap_inheritable.This silently corrupts audit data used for compliance and forensicanalysis: an attacker who modifies inheritable capabilities toprepare for a privilege-escalating exec would have the change maskedin the audit trail.The bug has been present since the original introduction of CAPSETaudit records in 2008.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ice: fix NULL pointer dereference in ice_reset_all_vfs()ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi().When the VSI rebuild fails (e.g. during NVM firmware update vianvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path,leaving txq_map and rxq_map as NULL. The subsequent unconditional callto ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference inice_ena_vf_q_mappings() when it accesses vsi->txq_map[0].The single-VF reset path in ice_reset_vf() already handles thiscorrectly by checking the return value of ice_vf_reconfig_vsi() andskipping ice_vf_post_vsi_rebuild() on failure.Apply the same pattern to ice_reset_all_vfs(): check the return valueof ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() andice_eswitch_attach_vf() on failure. The VF is left safely disabled(ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and canbe recovered via a VFLR triggered by a PCI reset of the VF(sysfs reset or driver rebind).Note that this patch does not prevent the VF VSI rebuild from failingduring NVM update - the underlying cause is firmware being in atransitional state while the EMP reset is processed, which can causeAdmin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. Thispatch only prevents the subsequent NULL pointer dereference thatcrashes the kernel when the rebuild does fail. crash> bt PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5" #0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee #1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba #2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540 #3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda #4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997 #5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595 #6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2 [exception RIP: ice_ena_vf_q_mappings+0x79] RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206 RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000 RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040 R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000 R13: 0000000000000010 R14: R15: ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice] #8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice] #9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice] #10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4 #11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de #12 [ff72159bcfe5bf18] kthread at ffffffffaa946663 #13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9 The panic occurs attempting to dereference the NULL pointer in RDX at ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi). The faulting VSI is an allocated slab object but not fully initialized after a failed ice_vsi_rebuild(): crash> struct ice_vsi 0xff34c9efc27d4828 netdev = 0x0, rx_rings = 0x0, tx_rings = 0x0, q_vectors = 0x0, txq_map = 0x0, rxq_map = 0x0, alloc_txq = 0x10, num_txq = 0x10, alloc_rxq = 0x10, num_rxq = 0x10, The nvmupdate64e process was performing NVM firmware update: crash> bt 0xff34c9edd1a30000 PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e" #0 [ff72159bcd617618] __schedule at ffffffffab5333f8 #4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice] #5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice] #6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice] #7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice] #8 ---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bindsyzbot reported a kernel BUG triggered from pn_socket_sendmsg() viapn_socket_autobind(): kernel BUG at net/phonet/socket.c:213! RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline] RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421 Call Trace: sock_sendmsg_nosec+0x112/0x150 net/socket.c:797 __sock_sendmsg net/socket.c:812 [inline] __sys_sendto+0x402/0x590 net/socket.c:2280 ...pn_socket_autobind() calls pn_socket_bind() with port 0 and, on-EINVAL, assumes the socket was already bound and asserts that theport is non-zero: err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn)); if (err != -EINVAL) return err; BUG_ON(!pn_port(pn_sk(sock->sk)->sobject)); return 0; /* socket was already bound */However pn_socket_bind() also returns -EINVAL when sk->sk_state is notTCP_CLOSE, even when the socket has never been bound and pn_port() isstill 0. In that case the BUG_ON() fires and panics the kernel from auser-triggerable path.Treat the "bind returned -EINVAL but pn_port() is still 0" case as aregular error and propagate -EINVAL to the caller instead of crashing.Existing callers already translate a non-zero return frompn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL hereonly changes behaviour from panic to a normal errno.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REGThere were multiple issues in that code.First of all the order between the reset semaphore and the mm_lock waswrong (e.g. copy_to_user) was called while holding the lock.Then we allocated memory while holding the reset semaphore which is alsoa pretty big bug and can deadlock.Then we used down_read_trylock() instead of waiting for the reset tofinish.(cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mailbox: add sanity check for channel arrayFail gracefully if there is no channel array attached to the mailboxcontroller. Otherwise the later dereference will cause an OOPS whichmight not be seen because mailbox controllers might instantiate veryearly. Remove the comment explaining the obvious while here.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mailbox: mailbox-test: free channels on probe errorOn probe error, free the previously obtained channels. This not onlyprevents a leak, but also UAF scenarios because the client structurewill be removed nonetheless because it was allocated with devm.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()In f2fs_sbi_show(), the extension_list, extension_count andhot_ext_count are read without holding sbi->sb_lock. If a concurrentsysfs store modifies the extension list via f2fs_update_extension_list(),the show path may read inconsistent count and array contents, potentiallyleading to out-of-bounds access or displaying stale data.Fix this by holding sb_lock around the entire extension list readand format operation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: sg: Resolve soft lockup issue when opening /dev/sgXThe parameter def_reserved_size defines the default buffer size reservedfor each Sg_fd and should be restricted to a range between 0 and 1,048,576(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although thefunction sg_proc_write_dressz enforces this limit, it is possible to bypassit by directly modifying the module parameter as shown below, which thencauses a soft lockup:echo -1 > /sys/module/sg/parameters/def_reserved_sizeexec 4<> /dev/sg0watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]Modules loaded:CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,PREEMPT disabledHardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version1.16.1-2.fc37 dated 04/01/2014...Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe fix is to use module_param_cb to validate and reject invalid valuesassigned to def_reserved_size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Avoid NULL dereference in dc_dmub_srv error pathsIn dc_dmub_srv_log_diagnostic_data() anddc_dmub_srv_enable_dpia_trace().Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub)and then call DC_LOG_ERROR() inside that block.DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So ifdc_dmub_srv is NULL, the logging itself can dereference aNULL pointer and cause a crash.Fix this by splitting the checks.First check if dc_dmub_srv is NULL and return immediately.Then check dc_dmub_srv->dmub and log the error only whendc_dmub_srv is valid.Fixes the below:../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:padata: Put CPU offline callback in ONLINE section to allow failuresyzbot reported the following warning: DEAD callback error for CPU1 WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")which tglx traced to padata_cpu_dead() given it's the onlysub-CPUHP_TEARDOWN_CPU callback that returns an error.Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPUso move the CPU offline callback to the ONLINE section where failure ispossible.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: mt7921: Place upper limit on station AIDAny station configured with an AID over 20 causes a firmware crash.This situation occurred in our testing using an AP interface on 7922hardware, with a modified hostapd, sourced from Mediatek's OpenWRTfeeds.In stock hostapd, station AIDs begin counting at 1, and thisconfiguration is prevented with an upper limit on associated stations.However, the modified hostapd began allocation at 65, which caused thefirmware to crash. This fix does not allow these AIDs to work, but willprevent the firmware crash.This crash was only seen on IFTYPE_AP interfaces, and the fix does notappear to have an effect on IFTYPE_STATION behavior.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocksby comparing it with the current block number bd_blocknr. If they differ,the block is considered dead and skipped.However, bd_oblocknr should never be 0 since block 0 typically stores theprimary superblock and is never a valid GC target block. A corrupted ioctlrequest with bd_oblocknr set to 0 causes the comparison to incorrectlymatch when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassingthe dead block check and calling nilfs_bmap_mark() on a non-existentblock. This causes nilfs_btree_do_lookup() to return -ENOENT, triggeringthe WARN_ON(ret == -ENOENT).Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at thebeginning of each iteration.[ryusuke: slightly modified the commit message and comments for accuracy]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:debugobjects: Do not fill_pool() if pi_blocked_onOn RT enabled kernels, fill_pool() ends up calling rtlock_lock(), whichasserts if current::pi_blocked_on is set, because a task can obviously onlyblock on one lock as otherwise the priority inheritenace chain getscorrupted.Prevent this by expanding the conditional to take current::pi_blocked_oninto account.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Use krealloc_array() in dal_vector_reserve()[Why & How]dal_vector_reserve() computes the allocation size as"capacity * vector->struct_size" using uint32_t arithmetic, which cansilently wrap to a small value on overflow. This would cause krealloc toreturn a smaller buffer than expected, leading to heap overflows onsubsequent vector appends.Replace krealloc() with krealloc_array() which performs an internaloverflow check and returns NULL on wrap, preventing the issue.(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngdWhen the remoteproc starts in parallel with the NGD driver being probed,or the remoteproc is already up when the PDR lookup is being registered,or in the theoretical event that we get an interrupt from the hardware,these callbacks will operate on uninitialized data. This result inissues to boot the affected boards.One such example can be seen in the following fault, whereqcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.[ 21.858578] ------------[ cut here ]------------[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116...[ 21.859251] Call trace:[ 21.859255] __queue_work+0x5e0/0x790 (P)[ 21.859265] queue_work_on+0x6c/0xf0[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl][ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl][ 21.859318] notifier_call_chain+0xa4/0x230[ 21.859329] srcu_notifier_call_chain+0x64/0xb8[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common][ 21.859355] rproc_start+0x130/0x230[ 21.859367] rproc_boot+0x3d4/0x518...Move the enablement of interrupts, and the registration of SSR and PDRuntil after the NGD device has been registered.This could be further refined by moving initialization to the controldriver probe and by removing the platform driver model from the picture.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmem: layouts: onie-tlv: fix hang on unknown typesThe EEPROM on my board has a vendor specific entry of type 0x41. Whenstumbling upon that, this driver hangs in an endless loop.Fix it by keep incrementing the offset on unknown entries, so the loopwill eventually stop.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bonding: fix NULL pointer dereference in bond_do_ioctl()In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() whichcan return NULL if the requested interface name does not exist. However,the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV;The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,(slave_dev)->name, ...) which unconditionally dereferences slave_dev->namebefore the NULL check is performed. This results in a NULL pointerdereference kernel oops when a user calls bonding ioctl (e.g.SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slaveinterface name.This is reachable from userspace via the bonding ioctl interface withCAP_NET_ADMIN capability, making it a potential local denial-of-servicevector.Fix by moving the slave_dbg() call after the NULL check.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()On all modern platforms Qualcomm CCI controller provides two I2C masters,and on particular boards only one I2C master may be initialized, and insuch cases the device unbinding or driver removal causes a NULL pointerdereference, because cci_halt() is called for all two I2C masters, buta completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] ....
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/virtio: Fix driver removal with disabled KMSDRM atomic and modesetting aren't initialized if virtio-gpu driver builtwith disabled KMS, leading to access of uninitialized data on driverremoval/unbinding and crashing kernel. Fix it by skipping shutting downatomic core with unavailable KMS.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: wm_adsp: Fix NULL dereference when removing firmware controlsIn wm_adsp_control_remove() check that the priv pointer is not NULLbefore attempting to cleanup what it points to.When cs_dsp creates a control it calls wm_adsp_control_add_cb() so thatwm_adsp can create its own private control data. There are two caseswhere private data is not created:1. The control is a SYSTEM control, so an ALSA control is not created.2. The codec driver has registered a control_add() callback that hides the control, so wm_adsp_control_add() is not called.When cs_dsp_remove destroys its control list it callswm_adsp_control_remove() for each control. But wm_adsp_control_remove()was attempting to cleanup the private data pointed to by cs_ctl->privwithout checking the pointer for NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()l2cap_chan_close() removes the channel from conn->chan_l, whichmust be done under conn->lock. cleanup_listen() runs under theparent sk_lock, so acquiring conn->lock would invert theestablished conn->lock -> chan->lock -> sk_lock order.Instead of calling l2cap_chan_close() directly, schedulel2cap_chan_timeout with delay 0 to close the channelasynchronously. The timeout handler already acquires conn->lockand chan->lock in the correct order.The timer is only armed when chan->conn is still set: if it isalready NULL, l2cap_conn_del() has already processed this channel(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),so there is nothing left to do. If l2cap_conn_del() races inafter the timer is armed, __clear_chan_timer() insidel2cap_chan_del() cancels it; if the timer has already fired, thehandler returns harmlessly because chan->conn was cleared.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: fix zerocopy completion for multi-skb sendsWhen a large message is fragmented into multiple skbs, the zerocopyuarg is only allocated and attached to the last skb in the loop.Non-final skbs carry pinned user pages with no completion tracking,so the kernel has no way to notify userspace when those pages are safeto reuse. If the loop breaks early the uarg is never allocated at all,leaking pinned pages with no completion notification.Fix this by following the approach used by TCP: allocate the zerocopyuarg (if not provided by the caller) before the send loop and attachit to every skb via skb_zcopy_set(), which takes a reference per skb.Each skb's completion properly decrements the refcount, and thenotification only fires after the last skb is freed.On failure, if no data was sent, the uarg is cleanly aborted vianet_zcopy_put_abort().This issue was initially discovered by sashiko while reviewing commit1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")but was pre-existing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udf: reject descriptors with oversized CRC lengthudf_read_tagged() skips CRC verification when descCRCLength +sizeof(struct tag) exceeds the block size. A crafted UDF image canset descCRCLength to an oversized value to bypass CRC validationentirely; the descriptor is then accepted based solely on the 8-bittag checksum, which is trivially recomputable.Reject such descriptors instead of silently accepting them. Alegitimate single-block descriptor should never have a CRC length thatexceeds the block.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: zero-initialize GART table on allocationGART TLB is flushed after unmapping but not after mapping. Sinceamdgpu_bo_create_kernel() does not zero-initialize the buffer, when asingle PTE is written the TLB may speculatively load other uninitializedentries from the same cacheline. Those garbage entries can appear valid,and a subsequent write to another PTE in the same cacheline may cause theGPU to use a stale garbage PTE from the TLB.Fix this by calling memset_io() to zero-initialize the GART table withgart_pte_flags immediately after allocation.Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not worksince SDMA needs GART to be initialized to work.(cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: vidtv: fix NULL pointer dereference in vidtv_mux_push_sisyzbot reported a general protection fault invidtv_psi_ts_psi_write_into [1].vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() doesnot check for this before dereferencing the returned pointer to accessthe continuity counter. This leads to a general protection fault whenaccessing a near-NULL address.The root cause is that vidtv_mux_pid_ctx_init() does not check thereturn value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs.If the allocation fails, the PID context is never created, but initreturns success. The subsequent vidtv_mux_push_si() call then getsNULL from vidtv_mux_get_pid_ctx() and crashes.Fix both the root cause (add error check in vidtv_mux_pid_ctx_initfor PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si forall vidtv_mux_get_pid_ctx() calls.[1]Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTIKASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]Workqueue: events vidtv_mux_tickRIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197Call Trace: vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:serial: 8250_dw: unregister 8250 port if clk_notifier_register() failsdw8250_probe() registers the 8250 port via serial8250_register_8250_port()and then, if the device has a clock, registers a clock notifier. Ifclk_notifier_register() fails, probe returns the error but leaves the8250 port registered. The matching serial8250_unregister_port() livesin dw8250_remove(), which is not called when probe fails, so the portslot stays occupied until the device is rebound or the system isrebooted. The devm-allocated driver data is freed while the port stillreferences it (via the saved private_data and serial_in/serial_outcallbacks), so any access to that port slot before a rebind is ause-after-free hazard.Unregister the port on the clk_notifier_register() error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_writeA KASAN null-ptr-deref was observed in vcs_notifier():BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {}The issue is a race condition in vcs_write(). When the console_lock istemporarily dropped (to copy data from userspace), the vc_data pointerobtained from vcs_vc() may become stale. After re-acquiring the lock,vcs_vc() is called again to re-validate the pointer. If the vc has beendeallocated in the meantime, vcs_vc() returns NULL, and the while loopbreaks (with written > 0). However, after the loop, vcs_scr_updated(vc)is still called with the now-NULL vc pointer, leading to a null pointerdereference in the notifier chain (vcs_notifier dereferences param->vc).Fix this by adding a NULL check for vc before calling vcs_scr_updated().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_varinfo->var, a framebuffer's current mode, is expected to have a matchingentry in info->modelist. var_to_display() relies on this and treats afailed fb_match_mode() as "This should not happen". fb_set_var() keeps ittrue by adding the mode to the list on every change, anddo_register_framebuffer() does the same at registration.store_modes() replaces the modelist from userspace. fb_new_modelist()validates the new modes but does not check that info->var still has amatch. It relies on fbcon_new_modelist() to re-point consoles, but thatonly handles consoles mapped to the framebuffer. With fbcon unbound thereare none, so info->var is left describing a mode that is no longer in thelist.A later console takeover runs var_to_display(), where fb_match_mode()returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes itto display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.Keep the current mode in the list in fb_new_modelist(), the same wayfb_set_var() does.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: containerd is an open-source container runtime. Versions prior to 2.3.2, 2.2.5 and 2.1.9 contain a bug where the CRI plugin restores container.log from a checkpoint image without validating a symlinked path. This could result in reading an arbitrary file on the host via kubectl logs. This issue has been fixed in versions 2.3.2, 2.2.5 and 2.1.9.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0653, the tree_count_words() function in src/spellfile.c fills in the word-count fields of a spell-file word trie by walking it iteratively with a depth counter. The counter is bounded only by the trie structure itself; it is never checked against the size of the fixed MAXWLEN-element stack arrays it indexes (arridx[], curi[], wordcount[]). A crafted .spl/.sug file pair, loaded when the user invokes spell suggestion, can drive the descent arbitrarily deep, so the function writes past the end of those arrays. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0653.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0662, the dump_prefixes() function in src/spell.c walks a spell-file prefix trie iteratively with a depth counter while dumping the prefixes that apply to a word. The counter is bounded only by the trie structure itself; it is never checked against the size of the fixed MAXWLEN-element stack arrays it indexes (prefix[], arridx[], curi[]). A crafted .spl file, loaded when the user dumps the word list, can drive the descent arbitrarily deep, so the function writes past the end of those arrays. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0662.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: A flaw was found in tar. A remote attacker could exploit this vulnerability by crafting a malicious archive, leading to hidden file injection with fully attacker-controlled content. This bypasses pre-extraction inspection mechanisms, potentially allowing an attacker to introduce malicious files onto a system without detection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- tar < 1.34-150000.3.42.1 (version in image is 1.34-150000.3.37.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0671, when Vim opens a file encrypted with the VimCrypt~04! or VimCrypt~05!method (xchacha20poly1305, requires the +sodium feature) whose body is shorter than a single libsodium secretstream header, an unsigned length calculation underflows and a subsequent decryption call reads far past the end of the input buffer, crashing Vim. This vulnerability is fixed in 9.2.0671.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0698, the single-byte branch of spell_soundfold_sofo() in src/spell.c translates a word through a spell file's SOFO (sound-folding) byte map into a caller-owned result buffer. Its copy loop advances the output index ri with no upper bound and terminates only on the input NUL, writing one byte per input byte into the MAXWLEN-element stack buffer the caller provides. A word longer than MAXWLEN, passed to soundfold() (or reached via sound-based spell suggestion) while a SOFO-based spell language is active, therefore writes past the end of that buffer. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0698.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: fix to do sanity check on f2fs_get_node_folio_ra()kernel BUG at fs/f2fs/file.c:845!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTICPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039cFS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0Call Trace: f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882 f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940 f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907 evict+0x61e/0xb10 fs/inode.c:841 f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224 get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694 vfs_get_tree+0x92/0x2a0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3758 [inline] do_new_mount+0x341/0xd30 fs/namespace.c:3834 do_mount fs/namespace.c:4167 [inline] __do_sys_mount fs/namespace.c:4383 [inline] __se_sys_mount+0x31d/0x420 fs/namespace.c:4360 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f count = ADDRS_PER_PAGE(dn.node_folio, inode); count -= dn.ofs_in_node; f2fs_bug_on(sbi, count < 0);The fuzz test will trigger above bug_on in f2fs.The root cause should be: in the corrupted inode, there is a direct nodewhich has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(),after f2fs_get_dnode_of_data() finds such dnode:1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 9232) once dn.ofs_in_node points to addr[923, 1017]Then it will trigger the system panic.Let's introduce NODE_TYPE_NON_IXNODE to indicate current node shouldnot be an inode or xattr node, and then use it in below path to detectinconsistent node chain in inode mapping table:- f2fs_do_truncate_blocks - f2fs_get_dnode_of_data - f2fs_get_node_folio_ra - __get_node_folio - f2fs_sanity_check_node_footer - case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw88: usb: fix memory leaks on USB write failuresWhen rtw_usb_write_port() fails to submit a USB Request Block (URB)(e.g., due to device disconnect or ENOMEM), the completion callback isnever executed.Currently, the driver ignores the return value of rtw_usb_write_port()in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because thesefunctions rely on the completion callback to free the socket buffers(skbs) and the transaction control block (txcb), a submission failureresults in:1. A memory leak of the allocated skb in rtw_usb_write_data().2. A memory leak of the txcb structure and all aggregated skbs in rtw_usb_tx_agg_skb().Fix this by checking the return value of rtw_usb_write_port(). If itfails, explicitly free the skb in rtw_usb_write_data(), and properlypurge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb().The issue was discovered in practice during device disconnect/reconnectscenarios and memory pressure conditions. Tested by verifying normal TXoperation continues after the fix without regressions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:apparmor: mediate the implicit connect of TCP fast open sendmsgsendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) andwrite(2): it opens the connection in the SYN. apparmor_socket_sendmsg()only checks AA_MAY_SEND, so a profile that grants send but denies connectlets a confined task open an outbound TCP/MPTCP connection that connect(2)would have refused, bypassing connect mediation.Mediate the implicit connect when MSG_FASTOPEN is set and a destinationis supplied. Add it to apparmor_socket_sendmsg() (not the sharedaa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm()directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does notcover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.5 ringJPEG rings do not support 64-bit user fence writes, reject CSsubmissions with user fences.(cherry picked from commit f05d0a4f21fc720116d6e238f23308b199891058)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0.3 ringJPEG rings do not support 64-bit user fence writes, reject CSsubmissions with user fences.(cherry picked from commit 2f6afc97d259d530f4f86c7743efbc573a8da927)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/jpeg: set no_user_fence for JPEG v4.0 ringJPEG rings do not support 64-bit user fence writes, reject CSsubmissions with user fences.(cherry picked from commit 8d0cac9478a3f046279c657d6a2545de49ae675a)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/jpeg: set no_user_fence for JPEG v3.0 ringJPEG rings do not support 64-bit user fence writes, reject CSsubmissions with user fences.(cherry picked from commit 4d7d774f100efb5089c86a1fb8c5bf47c63fc9ef)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ringJPEG rings do not support 64-bit user fence writes, reject CSsubmissions with user fences.(cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/jpeg: set no_user_fence for JPEG v2.0 ringJPEG rings do not support 64-bit user fence writes, reject CSsubmissions with user fences.(cherry picked from commit 96179da0c6b059eb31706a0abe8dd6381c533143)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn: set no_user_fence for VCN v4.0.5 enc ringVCN encoder and decoder rings do not support 64-bit user fence writes,reject CS submissions with user fences.(cherry picked from commit 084d94ac93707bdda07efb5cee786f632de4219b)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn: set no_user_fence for VCN v4.0.3 enc ringVCN encoder and decoder rings do not support 64-bit user fence writes,reject CS submissions with user fences.(cherry picked from commit ff1a5a125c5a70c328806b9bc01d7d942cf3f9aa)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ringVCN encoder and decoder rings do not support 64-bit user fence writes,reject CS submissions with user fences.(cherry picked from commit fd852c048b46f9825e904a4f3f4538fe9d8827d9)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn: set no_user_fence for VCN v3.0 enc/dec ringsVCN encoder and decoder rings do not support 64-bit user fence writes,reject CS submissions with user fences.(cherry picked from commit 663bed3c7b8b9a7624b0d95d300ddae034ad0614)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn: set no_user_fence for VCN v2.5 enc/dec ringsVCN encoder and decoder rings do not support 64-bit user fence writes,reject CS submissions with user fences.(cherry picked from commit efc9dd5590894109bce9a0bfe1fa5592dd6b20b1)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec ringsVCN encoder and decoder rings do not support 64-bit user fence writes,reject CS submissions with user fences.(cherry picked from commit e2b5499fca55f1a32960a311bbb62e35891eaf73)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route callsiso_connect_bis(), iso_connect_cis(), iso_listen_bis(), andiso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst,iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock().These fields may be modified concurrently by connect() or setsockopt()on the same socket, resulting in data-races reported by KCSAN.Fix this by snapshotting the required fields under lock_sock() beforecalling hci_get_route().BUG: KCSAN: data-race in memcmp+0x45/0xb0race at unknown origin, with read to 0xffff8880122135cf of 1 bytesby task 333 on cpu 1: memcmp+0x45/0xb0 hci_get_route+0x27e/0x490 iso_connect_cis+0x4c/0xa10 iso_sock_connect+0x60e/0xb30 __sys_connect_file+0xbd/0xe0 __sys_connect+0xe0/0x110 __x64_sys_connect+0x40/0x50 x64_sys_call+0xcad/0x1c60 do_syscall_64+0x133/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: tlb: Flush walk cache when unsharing PMD tablesWhen huge_pmd_unshare() is called to unshare a PMD table, thetlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=truebut the aarch64 tlb_flush() only checked tlb->freed_tables todetermine whether to use TLBF_NONE (vae1is, invalidates walkcache) or TLBF_NOWALKCACHE (vale1is, leaf-only).This caused the stale PMD page table entry to remain in the walk cacheafter unshare, potentially leading to incorrect page table walks.Fix by including unshared_tables in the check, so that whenunsharing tables, TLBF_NONE is used and the walk cache is properlyinvalidated.Here is the detailed distinction between vae1is and vale1is:| Instruction Combination | Actual Invalidation Scope || ------------------------ | --------------------------------------------------|| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) || `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 || `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) || `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only |
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: fix NULL pointer bug in svm_range_set_attrThe process_info could be NULL if user doesn't call kfd_ioctl_acquire_vmbefore calling kfd_ioctl_svm.(cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: sockmap: fix tail fragment offset in bpf_msg_push_dataWhen bpf_msg_push_data() inserts data in the middle of a scatterlistentry, it splits the original entry into a left fragment and a rightfragment.The right fragment offset is page-local, but the code advances it with`start`, which is the message-global insertion point. For inserts into anon-first SG entry, this over-advances the offset and leaves the splitlayout inconsistent.Advance the right fragment offset by the fragment-local delta,`start - offset`, which matches the length removed from the front of theoriginal entry.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: chemical: scd30: fix division by zero in write_rawAdd a zero check for val2 before using it as a divisor when setting thesampling frequency. A user writing a zero fractional part to thesampling_frequency sysfs attribute triggers a division by zero in thekernel.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: gyro: adis16260: fix division by zero in write_rawAdd a validation check for the sampling frequency value before using itas a divisor. A user writing zero to the sampling_frequency sysfsattribute triggers a division by zero in the kernel.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO bufferThe tagged FIFO path declares iio_buff on the stack with __aligned(8)but no initializer, but there is a hole in the structure, which willthen leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will becopied, but the space between that and the timestamp are notinitialized.Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leakissues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan,but for the tagged path it only added the alignment qualifier and notthe initializer :(Fix this by just zero-initializing the structure on the stack.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: fix possible infinite loop in rt6_fill_node()Sashiko reported this issue [1]. Apply the same fix ascommit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)without waiting for RCU readers; rt->fib6_siblings.next then stillpoints into the old ring and this softirq-side walker never reaches&rt->fib6_siblings, causing a CPU stall. fib6_del_route() alwaysWRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so aninside-loop check is a reliable detach signal.[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: fix packet loop on netem when duplicate is onWhen netem duplicates a packet it re-enqueues the copy at the root qdisc.If another netem sits in the tree the copy can be duplicatedagain, recursing until the stack or memory is exhausted.The original duplication guard temporarily zeroed q->duplicate aroundthe re-enqueue, but that does not cover all cases because it isper-qdisc state shared across all concurrent enqueue pathsand is not safe without additional locking.Use the skb tc_depth field introduced in an earlier patch: - increment it on the duplicate before re-enqueue - skip duplication for any skb whose tc_depth is already non-zero.This marks the packet itself rather than mutating qdisc state,therefore it is safe regardless of tree topology or concurrency.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: refuse to enslave CAN devicessyzbot reported a kernel paging request crash incan_rx_unregister() inside net/can/af_can.c. The crash occursbecause a virtual CAN device (vxcan) is being enslaved to abonding master.During the enslavement process, the bonding driver mutatesand modifies the network device states to fit an Ethernet-likeaggregation model. However, CAN devices operate on a completelydifferent Layer 2 architecture, relying on the CAN mid-layerprivate data structure (can_ml_priv) instead of standardEthernet structures. Since bonding does not initialize ormaintain these CAN structures, subsequent operations on thehalf-enslaved interface (such as closing associated socketsvia isotp_release) lead to a null-pointer dereference whenaccessing the CAN receiver lists.Bonding CAN interfaces is architecturally invalid as CAN lacksMAC addresses, ARP capabilities, and standard Ethernetlink-layer mechanisms. While generic loopback devices areblocked globally in net/core/dev.c, virtual CAN devicesbypass this check because they do not carry the IFF_LOOPBACKflag, despite acting as local software-loopbacks.Fix this by explicitly blocking network devices of typeARPHRD_CAN from being enslaved at the very beginning ofbond_enslave(). This prevents illegal state mutations,eliminates the resulting KASAN crashes, and avoids potentialmemory leaks from incomplete socket cleanups.As the CAN support has been added a long time after bondingthe Fixes-tag points to the introduction of ARPHRD_CAN thatwould have needed a specific handling in bonding_main.c.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()The skb_clone() function can return NULL if memory allocation fails.send_mcast_pkt() calls skb_clone() without checking the return value, whichcan lead to a NULL pointer dereference in send_pkt() when it dereferencesskb->data.Add a NULL check after skb_clone() and skip the peer if the clone fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cgroup/rstat: validate cpu before css_rstat_cpu() accesscss_rstat_updated() is exposed as a BPF kfunc and accepts acaller-provided cpu argument. The function uses cpu for per-cpu rstatlookups without checking whether it refers to a valid possible CPU.A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass aninvalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_readAdd cpu validation to the BPF-facing css_rstat_updated() kfunc andmove the common implementation to __css_rstat_updated() for in-kernelcallers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: tls: prevent chain-after-chain in plain text SGSashiko points out that if end = 0 (start != 0) the currentcode will create a chain link to content type right afterthe wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links.meaning this is illegal input to crypto.The wrapping link is unnecessary if end = 0. end is the entry afterthe last one used so end = 0 means there's nothing pushed afterthe wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap]Skip the wrapping in this case.TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0.This avoids the chain-after-chain.Move the wrap chaining before marking END and chaining off contenttype, that feels like more logical ordering to me, but should notmatter from functional perspective.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()pin_user_pages_fast() can partially succeed and return the number ofpages that were actually pinned. However, the bio_integrity_map_user()does not handle this partial pinning. This leads to a general protectionfault since bvec_from_pages() dereferences an unpinned page address,which is 0.To fix this, add a check to verify that all requested memory is pinned.If partial pinning occurs, unpin the memory and return -EFAULT.Kernel Oops:Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTIKASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfs: Fix leak of request in netfs_write_begin() error handlingFix netfs_write_begin() to not leak our ref on the request in the eventthat we get an error from netfs_wait_for_read().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:powerpc/hv-gpci: fix preempt count leak in sysfs show pathsFour sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb)(which calls preempt_disable()) but only call the matching put_cpu_var()on the error path under the 'out:' label. Every successful read leaksone preempt_disable(): processor_bus_topology_show() processor_config_show() affinity_domain_via_virtual_processor_show() affinity_domain_via_domain_show()(affinity_domain_via_partition_show() was already correct.)On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count andeventually return to userspace with preemption still disabled. Thenext user-mode page fault then hits faulthandler_disabled() == 1,gets forced to SIGSEGV, and the resulting coredump trips'BUG: scheduling while atomic' in call_usermodehelper_exec ->wait_for_completion_state -> schedule: BUG: scheduling while atomic:
//0x00000004 ... __schedule_bug+0x6c/0x90 __schedule+0x58c/0x13a0 schedule+0x48/0x1a0 schedule_timeout+0x104/0x170 wait_for_completion_state+0x16c/0x330 call_usermodehelper_exec+0x254/0x2d0 vfs_coredump+0x1050/0x2590 get_signal+0xb9c/0xc80 do_notify_resume+0xf8/0x470Add an out_success label that calls put_cpu_var() before returningthe byte count, mirroring affinity_domain_via_partition_show().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RTOn PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads viarun_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.After irq_work_single() clears BUSY via atomic_cmpxchg(), it stilldereferences @work for irq_work_is_hard() and rcuwait_wake_up().An irq_work_sync() caller on another CPU that enters after BUSY is clearedcan observe BUSY==0 immediately, return, and free the work before thoseaccesses complete - causing a use-after-free.Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entireirq_work_single() execution is within an RCU read-side criticalsection. Then add synchronize_rcu() in irq_work_sync() afterrcuwait_wait_event() to ensure the caller waits for the RCU grace periodbefore returning, preventing premature frees.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: bla: avoid NULL-ptr deref for claim via dropped interfaceWithout rtnl_lock held, a hardif might be retrieved as primary interface ofa meshif, but then (while operating on this interface) getting decoupledfrom the mesh interface. In this case, the meshif still exists but thepointer from the primary hardif to the meshif is set to NULL.The mesh_iface must be checked first to be non-NULL before continuing tosend an ARP request using meshif.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: bcmgenet: keep RBUF EEE/PM disabledSetting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RXpath on GENET hardware once MAC EEE becomes active. RX traffic stopsflowing while the link stays up and the usual descriptor/RX errorcounters remain quiet. In that state the MAC still accepts frames(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them toDMA, so rx_packets is no longer incremented at the netdev level. Onsome boards the corruption ends up as a paging fault inskb_release_data via bcmgenet_rx_poll on an LPI exit.Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by FlorianFainelli on an internal Broadcom 4908-family board with the same crashsignature. RBUF_PM_EN is not publicly documented.This shows up more often now that phy_support_eee() enables EEE bydefault, but it also affects older kernels as soon as TX LPI isturned on via ethtool, so it is not specific to recent changes.Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set sothe bits stay off across resets. UMAC and TBUF setup is left alone soTX-side EEE keeps working.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: ISO: drop ISO_END frames received without prior ISO_STARTISO data PDUs carry a packet-boundary flag indicating START, CONT, ENDor SINGLE. The ISO_CONT branch of iso_recv() guards against a missingISO_START by checking conn->rx_len before touching conn->rx_skb, butISO_END does not.If a peer sends an ISO_END as the first packet on a fresh ISOconnection, conn->rx_skb is still NULL and conn->rx_len is zero, soskb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS,where receivers sync to a broadcaster without pairing, any broadcasteron the air can trigger this.Mirror the ISO_CONT check at the top of ISO_END so a stray end fragmentis logged and dropped instead of crashing the host.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/memory: fix spurious warning when unmapping device-private/exclusive pagesDevice private and exclusive entries are only supported for anonymousfolios. This condition is tested in __migrate_device_pages() andmake_device_exclusive() using folio_test_anon(). However the unmap pathtests this assumption using vma_is_anonymous().This is wrong because whilst anonymous VMAs can only contain folios wherefolio_test_anon() is true the opposite relation does not hold. A foliofor which folio_test_anon() is true does not imply vma_is_anonymous() istrue. Such a condition can occur if for example a folio is part of aprivate filebacked mapping.In this case vma_is_anonymous() is false as the mapping is filebacked, butfolio_test_anon() may be true, thus permitting devices to migrate thefolio to device private memory. This can lead to the following spuriouswarnings during process teardown:[ 772.737706] ------------[ cut here ]------------[ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041[ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O)[ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full)[ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE[ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014[ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a[ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02[ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286[ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8[ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08[ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68[ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001[ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0[ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000[ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0[ 772.779135] Call Trace:[ 772.779792] [ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm][ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0[ 772.782992] ? __rwlock_init+0x150/0x150[ 772.784006] ? lock_release+0x216/0x2b0[ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0[ 772.786522] ? lock_release+0x216/0x2b0[ 772.787498] ? unmap_single_vma+0xb6/0x210[ 772.788573] unmap_vmas+0x27d/0x520[ 772.789506] ? unmap_single_vma+0x210/0x210[ 772.790607] ? mas_update_gap.part.0+0x620/0x620[ 772.791834] unmap_region+0x19e/0x350[ 772.792769] ? remove_vma+0x130/0x130[ 772.793684] ? mas_alloc_nodes+0x1f2/0x300[ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20[ 772.795926] ? unmap_region+0x350/0x350[ 772.796917] do_vmi_align_munmap+0x36a/0x4e0[ 772.798018] ? lock_release+0x216/0x2b0[ 772.799024] ? vma_shrink+0x620/0x620[ 772.799983] do_vmi_munmap+0x150/0x2c0[ 772.800939] __vm_munmap+0x161/0x2c0[ 772.801872] ? expand_downwards+0xd60/0xd60[ 772.802948] ? clockevents_program_event+0x1ef/0x540[ 772.804217] ? lock_release+0x216/0x2b0[ 772.805158] __x64_sys_munmap+0x59/0x80[ 772.805776] do_syscall_64+0xfc/0x670[ 772.806336] ? irqentry_exit+0xda/0x580[ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53[ 772.807772] RIP: 0033:0x7f327cbb2717[ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: asihpi: Fix potential OOB array access at reading cachefind_control() to retrieve a cached info accesses the array with thegiven index blindly, which may lead to an OOB array access.Add a sanity check for avoiding it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: fix metabuf leak in inode xattr initializationcommit bb88e8da0025 ("erofs: use meta buffers for xattr operations")converted xattr operations to use on-stack erofs_buf instances.erofs_init_inode_xattrs() uses such a metabuf while reading the inlinexattr header and shared xattr id array.Some error paths after erofs_read_metabuf() leave through out_unlockwithout dropping the metabuf, so the folio reference can leak.Consolidate the cleanup at out_unlock. erofs_put_metabuf() is ano-op if no folio has been acquired, and this keeps all paths aftertaking EROFS_I_BL_XATTR_BIT covered by a single cleanup site.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pds_core: fix error handling in pdsc_devcmd_waitFix two cases where pdsc_devcmd_wait() returns stale success fromthe completion register instead of an error:1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO.2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up.Both errors now propagate to pdsc_devcmd_locked() which queueshealth_work for recovery.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm: Fix iommu_map_sgtable() return value check and avoid WARNCommit "iommu: return full error code from iommu_map_sg[_atomic]()"changed iommu_map_sgtable() to return an ssize_t and negative valuesin error cases, rather than a size_t and a zero.Store the return value in the appropriate type and in case of error,return it rather than WARNing.Patchwork: https://patchwork.freedesktop.org/patch/719685/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ARM: integrator: Fix early initializationStarting with commit bdb249fce9ad4 ("ARM: integrator: read counter usingsyscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatiblewhich in turn calls of_syscon_register. This function allocates memory.Since the memory management code has not been initialized at that time,the call always fails. It either returns -ENOMEM or crashes as follows.Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read[0000000c] *pgd=00000000Internal error: Oops: 5 [#1] ARMModules linked in:CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPTHardware name: ARM Integrator/CP (Device Tree)PC is at __kmalloc_cache_noprof+0xec/0x39cLR is at __kmalloc_cache_noprof+0x34/0x39c...Call trace: __kmalloc_cache_noprof from of_syscon_register+0x7c/0x310 of_syscon_register from device_node_get_regmap+0xa4/0xb0 device_node_get_regmap from intcp_init_early+0xc/0x40 intcp_init_early from start_kernel+0x60/0x688 start_kernel from 0x0The crash is seen due to a dereferenced pointer which is not supposed to beNULL but is NULL if the memory management subsystem has not beeninitialized. The crash is not seen with all versions of gcc. Some versionssuch as gcc 9.x apparently do not dereference the pointer, presumably iftracing is disabled. The problem has been reproduced with gcc 10.x, 11.x,and 13.x. Either case, if the crash is not seen, the call tosyscon_regmap_lookup_by_compatible returns -ENOMEM, andsched_clock_register is never called.Fix the problem by moving the early initialization code into the standardmachine initialization code.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:firmware: arm_ffa: Check for NULL FF-A ID table while driver registrationThe bus match callback assumes that every FF-A driver provides anid_table and dereferences it unconditionally. Enforce that contract atregistration time so a buggy client driver cannot crash the bus duringmatch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: sprd: fix error pointer deref after DMA setup failureThe driver falls back to PIO mode if DMA setup fails during probe.Make sure to check the dma.enabled flag before trying to release the DMAchannels also on late probe errors to avoid dereferencing an errorpointer (or attempting to release a channel a second time).This issue was flagged by Sashiko when reviewing a devres allocationconversion patch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: qup: fix error pointer deref after DMA setup failureThe driver falls back to PIO mode if DMA setup fails during probe.Make sure to the clear the DMA channel pointers on setup failure toavoid dereferencing an error pointer (or attempting to release a channela second time) on later probe errors or driver unbind.This issue was flagged by Sashiko when reviewing a devres allocationconversion patch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:efi: Allocate runtime workqueue before ACPI initSince commit 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers")ACPI PRM calls are delegated to a workqueue which runs in a kernelthread, making it easier to detect and mitigate faulting memory accessesperformed by the firmware.Rafael reports that such PRM accesses may occur before efisubsys_init()executes, which is where the workqueue is allocated, leading to NULLpointer dereferences. Since acpi_init() [which triggers the early PRMaccesses] executes as a subsys_initcall() as well, and has its owndependencies that may be sensitive to initcall ordering, deferringacpi_init() is not an option.So instead, split off the workqueue allocation into its own postcoreinitcall, as this is the only missing piece to allow EFI runtime callsto be made. This ensures that EFI runtime call (including PRM calls) areaccessible to all code running at subsys_initcall() level.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sysfs: don't remove existing directory on update failureWhen sysfs_update_group() is called for a named group and create_files()fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) onthe group directory. In the update path, kn was obtained viakernfs_find_and_get() and refers to a directory that already existedbefore this call. Removing it silently destroys a sysfs group that thecaller did not create.Only remove the directory if we created it ourselves. On update failurethe directory remains as it is left empty by remove_files() insidecreate_files(), but can be repopulated by a retry.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfs: fail recovery on a committed log item with no regionsIf the first op of a transaction is a bare transaction header(len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans()adds an item but no region, leaving it on r_itemq with ri_cnt == 0 andri_buf == NULL.The header can be split across op records, so later ops may still addregions; the item is only invalid if the transaction commits with none.The runtime commit path never emits such a transaction, so this onlyhappens on a crafted log. It came from an AI-assisted code audit of therecovery parser.xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads*(unsigned short *)item->ri_buf[0].iov_base and faults on the NULLri_buf. Reject it there, before the commit handlers that also readri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lockl2cap_conn_del() takes conn->lock and then calls cancel_work_sync() forpending_rx_work. process_pending_rx() takes the same mutex, so teardowncan deadlock against the worker it is flushing.This issue was found by our static analysis tool and then manuallyreviewed against the current tree.The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,&conn->pending_rx_work) submit path, the l2cap_conn_del() ->cancel_work_sync(&conn->pending_rx_work) teardown path, and theprocess_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK ***Cancel pending_rx_work before taking conn->lock, matching the existinglock-before-drain ordering used for the two delayed works in the sameteardown path. The pending_rx queue is still purged after the work hasbeen cancelled and conn->lock has been acquired.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: xsk: Fix unlocked writing to ICOSQDuring napi poll, when the affinity changes and there's still XSK workto be done, we trigger an ICOSQ interrupt on the new CPU. However, thistriggering on the ICOSQ is done unprotected.There are 2 such races:A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() isrunning from a different CPU due to affinity change. This can happenbecause IRQ triggering is done after napi_complete_done(). At this pointthe NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pcB) mlx5e_trigger_irq() is called on the ICOSQ whenmlx5e_trigger_napi_icosq() is running.The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimizedlocking scheme that doesn't work for this scenario. Kick the async ICOSQinstead which is always locked.This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise()A kernel panic is observed when handling machine check exceptions fromreal mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0The crash occurs because arch_irq_work_raise() calls preempt_disable()from machine check exception (MCE) handlers running in real mode. Inthis context, accessing the preempt_count can fault, leading to the panic.The preempt_disable()/preempt_enable() pair in arch_irq_work_raise()was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fixoops due to perf_event_do_pending call") to avoid races while raisingirq work from exception context.Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI whenqueueing work on the local CPU") added preemption protection inirq_work_queue() path, while commit 20b876918c06 ("irq_work: Use percpu atomics instead of regular atomics") added equivalentprotection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise()As a result, callers other than mce_irq_work_raise() already executewith preemption disabled, making the additionalpreempt_disable()/preempt_enable() pair in arch_irq_work_raise()redundant.The arch_irq_work_raise() function executes in NMI context when calledfrom MCE handler. Hence we will not be preempted or scheduled out sincewe are in NMI context with MSR[EE]=0. Therefore, it is safe to removethe preempt_disable()/preempt_enable() calls from here.Remove it to avoid accessing preempt_count from real mode context.[Maddy: Fixed the commit title]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: bla: fix report_work leak on backbone_gw purgebatadv_bla_purge_backbone_gw() removes stale backbone gateway entries,but fails to properly handle their associated report_work:- If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv).- If report_work is pending, the purge must cancel it and release the reference held for that pending work item.The previous implementation called hlist_for_each_entry_safe() inside aspin_lock_bh() section, but cancel_work_sync() may sleep and thereforecannot be called from within a spinlock-protected region.Restructure the loop to handle one entry per spinlock critical section:acquire the lock, find the next entry to purge, remove it from the hashlist, then release the lock before calling cancel_work_sync() anddropping the hash_entry reference. Repeat until no more entries requirepurging.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async[Why&How]dc_process_dmub_aux_transfer_async() copies payload->length bytes into a16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), whichis a no-op in release builds. If a caller ever passes length > 16 thisresults in a stack buffer overflow via memcpy.Additionally, link_index is used to dereference dc->links[] withoutbounds checking against dc->link_count, risking an out-of-bounds access.Replace the ASSERT with a hard runtime check that returns false whenpayload->length exceeds the destination buffer size, and add a boundscheck for link_index before it is used.(cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:device property: set fwnode->secondary to NULL in fwnode_init()If a firmware node is allocated on the stack (for instance: temporarysoftware node whose life-time we control) or on the heap - but using anon-zeroing allocation function - and initialized using fwnode_init(),its secondary pointer will contain uninitalized memory which likely willbe neither NULL nor IS_ERR() and so may end up being dereferenced (forexample: in dev_to_swnode()). Set fwnode->secondary to NULL oninitialization.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-pf: avoid double free of pool->stack on AQ init failureotx2_pool_aq_init() frees pool->stack when mailbox sync or retryallocation fails, but leaves the pointer unchanged. Later,otx2_sq_aura_pool_init() unwinds the partial setup throughotx2_aura_pool_free(), which frees pool->stack again. The CN20K-specificcn20k_pool_aq_init() implementation has the same bug inits corresponding error path.Set pool->stack to NULL immediately after the local free so the sharedcleanup path does not free the same stack again while cleaning uppartially initialized pool state.The bug was first flagged by an experimental analysis tool we aredeveloping for kernel memory-management bugs while analyzingv6.13-rc1. The tool is still under development and is not yet publiclyavailable. Manual inspection confirms that the bug is still present inv7.1-rc3.Runtime validation was not performed because reproducing this pathrequires OcteonTX2/CN20K hardware.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-af: CGX: add bounds check to cgx_speed_mbps indexcgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values0-15. If it returns a value >= 13, this causes an out-of-bounds arrayaccess. Add a bounds check and default to speed 0 if the index is out ofrange.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm/dsi: don't dump registers past the mapped regionOn DSI 6G platforms the IO address space is internally adjusted byio_offset. Later this adjusted address might be used for memory dumping.However the size that is used for memory dumping isn't adjusted toaccount for the io_offset, leading to the potential access to theunmapped region. Lower ctrl_size by the io_offset value to preventaccess past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140Patchwork: https://patchwork.freedesktop.org/patch/721747/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tty: serial: pch_uart: add check for dma_alloc_coherent()Add a check for dma_alloc_coherent() failure to prevent a potentialNULL pointer dereference in dma_handle_rx(). Properly release DMAchannels and the PCI device reference using a goto ladder if theallocation fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: elan_i2c - validate firmware size before useEnsure that the firmware file is large enough to contain the expectednumber of pages and the signature (which resides at the end of thefirmware blob) before accessing them to prevent potential out-of-boundsreads.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/damon/sysfs-schemes: delete tried region in regions_rmdirs()DAMON sysfs maintains the DAMOS tried region directory objects via alinked list. When the user requests refresh of the directories, DAMONsysfs removes all the region directories first, and then generate updatedregions directory on the empty space. The removal function(damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects. Deletion of the container region object from the linked list is doneinside the kobj release callback function.If somehow the callback invocation is delayed, the list will containregions list that gonna be freed. If the updated region directoriescreation is started in this situation, the list can be corrupted anduse-after-free can happen.Because the kobj objects are managed by only DAMON sysfs, the issue cannothappen in normal situation. But, such delays can be made on kernels thatbuilt with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue canindeed be reproduced like below. # damo start --damos_action stat # cd /sys/kernel/mm/damon/admin/kdamonds/0/ # for i in {1..10}; do echo update_schemes_tried_regions > state; done # dmesg | grep underflow [ 89.296152] refcount_t: underflow; use-after-free.Fix the issue by removing the region object from the list whendecrementing the reference count.Also update damos_sysfs_populate_region_dir() to add the region object tothe list only after the kobject_init_and_add() is success, so that fail ofkobject_init_and_add() is not leaving the deallocated object on the list.The issue was discovered [1] by Sashiko.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: rockchip: teardown bugs and resource leaksAddress several teardown issues and resource leaks in the driver's removepath and error handling:1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup.2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. Fix this by clearing the handler in remove().3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings.[Bartosz: don't emit an error message on devres allocation failure]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: net2280: Fix double free in probe error pathusb_initialize_gadget() installs gadget_release() as the releasecallback for the embedded gadget device. The struct net2280 instance istherefore released through gadget_release() when the gadget device's lastreference is dropped.The probe error path calls net2280_remove(), which tears down thepartially initialized device and drops the gadget reference withusb_put_gadget(). Calling kfree(dev) afterwards can free the same objectagain.Drop the explicit kfree() and let the gadget device release callbackhandle the final free. This issue was found by a static analysis toolI am developing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: codecs: simple-mux: Fix enum control bounds checksimple_mux_control_put() rejects values greater than e->items, butenum control values are zero based. For the two-entry mux used by thisdriver, valid values are 0 and 1, so value 2 must be rejected as well.Accepting e->items can store an invalid mux state, pass it to the GPIOsetter, and pass it on to the DAPM mux update path where it is used asan index into the enum text array.Use the same >= e->items check used by the ASoC enum helpers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: modedb: fix a possible UAF in fb_find_mode()If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; }Later, name is assigned from mode_option: const char *name = mode_option;However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf);while name is still accessed by: if ((name_matches(db[i], name, namelen) ||Since name aliases mode_option_buf, this may result in ause-after-free.Fix this by extending the lifetime of mode_option_buf until the end of thefunction by using scope-based resource management for cleanup.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fpga: region: fix use-after-free in child_regions_with_firmware()Move of_node_put(child_region) after the error print to avoid accessingfreed memory when pr_err() references child_region.[ Yilun: Fix the Fixes tag ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BARWhen BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardownpath ends up calling pci_iounmap() on the same iomem with some offset,which is unnecessary and triggers a kernel warning like the following: Trying to vunmap() nonexistent vm area (0000000069a5ffe8) WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937 [...] Call trace: vunmap+0x58/0x68 (P) iounmap+0x34/0x48 pci_iounmap+0x2c/0x40 ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf] pci_device_remove+0x48/0xf8 device_remove+0x50/0x88 device_release_driver_internal+0x1c8/0x228 driver_detach+0x50/0xb0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x68 pci_unregister_driver+0x34/0xa0 ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf] [...]Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: iwlwifi: mld: validate sta_mask before ffs() in BA session handlersThree BA session handlers use ffs(ba_data->sta_mask) - 1 to derive astation ID without checking that sta_mask is non-zero. When sta_mask iszero, ffs() returns 0 and the subtraction wraps to 0xFFFFFFFF, causingan out-of-bounds access on fw_id_to_link_sta[].Add WARN_ON_ONCE(!ba_data->sta_mask) guards before each ffs() call,consistent with the existing check in iwl_mld_ampdu_rx_start().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: goodix - clamp the device-reported contact countgoodix_ts_read_input_report() copies the number of touch points reportedby the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The onlyruntime check bounds the per-interrupt count against ts->max_touch_num,but that value is taken verbatim from a 4-bit field of the deviceconfiguration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;The nibble can be 0..15, so a malfunctioning, malicious or counterfeitcontroller (or an attacker tampering with the I2C bus) can advertise upto 15 contacts. goodix_ts_read_input_report() then accepts a touch_numof up to 15 and the second goodix_i2c_read() writests->contact_size * (touch_num - 1) bytes past the one-contact header intopoint_data - up to 30 bytes (45 with the 9-byte report format) beyond the92-byte buffer: a stack out-of-bounds write.Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contactspoint_data[] is sized for, when reading it from the configuration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: elan_i2c - prevent division by zero and arithmetic underflowThe Elan I2C touchpad driver queries the device for its physicaldimensions and trace counts to calculate the device resolution and width.However, if the device firmware or device tree provides invalid zerovalues for x_traces or y_traces, it results in a fatal division-by-zeroexception leading to a kernel panic during device probe.Add checks to ensure these parameters are non-zero before performingthe division. If invalid trace values are detected, fall back to a safedefault of 1.Additionally, prevent an arithmetic underflow in the touch reportinglogic. Previously, if the calculated or fallback width was smaller thanETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in amassive unsigned integer being reported to userspace. Clamp the adjustedwidth to a minimum of 0 to safely handle small physical dimensions andfallback scenarios.Completing the probe with safe fallback values ensures the sysfs nodesare created, keeping the firmware update path intact so a recoveryfirmware can be flashed to the device.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED countrmi_f30_map_gpios() allocates gpioled_key_map withmin(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, butrmi_f30_attention() iterates the full f30->gpioled_count (device queryregister, range 0..31) and dereferences gpioled_key_map[i], andinput->keycodemax is set to the full gpioled_count while input->keycodepoints at the 6-entry allocation.A device that reports gpioled_count > 6 with GPIO support enabledtherefore causes an out-of-bounds read on the attention interrupt andout-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,which bound the index only against keycodemax. This is the same defectas the F3A handler, which was copied from F30.Size the keymap for the full gpioled_count; the mapping loop stillassigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: synaptics-rmi4 - bound the F3A keymap to the GPIO countrmi_f3a_initialize() takes the GPIO count from the device query register(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).rmi_f3a_map_gpios() then allocates gpio_key_map withmin(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, butrmi_f3a_attention() iterates the full gpio_count and dereferencesgpio_key_map[i], and input->keycodemax is set to the full gpio_countwhile input->keycode points at the 6-entry allocation.A device that reports gpio_count > 6 therefore causes an out-of-boundsread of gpio_key_map[] on every attention interrupt, and out-of-boundsaccesses through the input core's default keymap ioctls: EVIOCGKEYCODEreads past the buffer (leaking adjacent slab memory to user space) andEVIOCSKEYCODE writes a caller-controlled value past it, for any processable to open the evdev node, since input_default_getkeycode() andinput_default_setkeycode() only bound the index against keycodemax.Size the keymap for the full gpio_count. The mapping loop is unchanged:it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)and are skipped when reporting.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()afu_ioctl_dma_map() accepts a 64-bit length from userspace viaDFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The valueis passed to afu_dma_pin_pages() where npages is derived aslength >> PAGE_SHIFT and passed to pin_user_pages_fast() which takesint nr_pages, causing implicit truncation if length is very large.Validate map.length at the ioctl entry point before callingafu_dma_map_region(), rejecting values whose page count exceedsINT_MAX.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: guest_memfd: Treat memslot binding offset+size as unsigned valuesWhen binding a memslot to a guest_memfd file, treat the offset and size asunsigned values to fix a bug where the sum of the two can result in a falsenegative when checking for overflow against the size of the file. Passingunsigned values also avoids relying on somewhat obscure checks in otherflows for safety, and tracks the offset and size as they are intended to betracked, as unsigned values.On 64-bit kernels, the number of pages a memslot contains and thus the size(and offset) of its guest_memfd binding are unsigned 64-bit values. Takingthe offset+size as an loff_t instead of a uoff_t inadvertently convertsthe unsigned value to a signed value if the offset and/or size is massive.Locally storing the offset and size as signed values is benign in and ofitself (though even that is *extremely* difficult to discern), butoperating on their sum is not.For the offset, KVM explicitly checks against a negative value, which mightseem like a bug as KVM could incorrectly reject a legitimate binding, butthat's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed valuefor its size, i.e. a would-be-negative offset is also greater than themaximum possible size of any guest_memfd file.Regarding the size, while KVM lacks an explicit check for a negative value,i.e. seemingly has a flawed overflow check, KVM restricts the number ofpages in a single memslot to the largest positive signed 32-bit value: if (id < KVM_USER_MEM_SLOTS && (mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES) return -EINVAL;and so that maximum "size" will ever be is 0x7fffffff000.The sum of the two is, however, problematic. While the size is restrictedby KVM's memslot logic, the offset is not, i.e. the offset is completelyunchecked until the "offset + size > i_size_read(inode)" check. If theoffset is the (nearly) largest possible _positive_ value, then adding sizeto the offset can result in a signed, negative 64-bit value. When comparedagainst the size of the file (guaranteed to be positive), the negative sumis always smaller, and KVM incorrectly allows the absurd offset.Opportunistically add missing includes in kvm_mm.h (instead of relying onits parents).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Ensure vendor's exit handler runs before fastpath userspace exitsMove the handling of fastpath userspace exits into vendor code to ensureKVM runs vendor specific operations that need to run before userspace gainscontrol of the vCPU. E.g. for VMX (and soon to be for SVM as well), KVMneeds to flush the PML buffer prior to exiting to userspace, otherwise anymemory written by the final KVM_RUN might never be flagged as dirty.Note, waiting to snapshot CR0 and CR3 until svm_handle_exit() is flawed ingeneral, as that risks consuming stale state in a fastpath handler. Thatwill be addressed in a future change.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPUflush_hyp_vcpu() copies the host vCPU context into the hyp's privatevCPU on every run. ctxt_to_vcpu() expects a guest context to have aNULL __hyp_running_vcpu, which is only ever set on the host context, sothat it resolves the vCPU via container_of(). While this is generallythe case, flush_hyp_vcpu() copies the context verbatim and does notenforce this, so a value provided by the host is dereferenced at EL2(host -> EL2).Fix by clearing __hyp_running_vcpu after the copy.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPUflush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPUon every run. The vGIC list register save and restore use used_lrs astheir loop bound and expect it to stay within the number of implementedlist registers. While this is generally the case, flush_hyp_vcpu()copies vgic_v3 verbatim and does not enforce this, so a value providedby the host is used at EL2 to index vgic_lr[] and access ICH_LR_EL2(host -> EL2).Fix by clamping used_lrs to the number of implemented list registersafter the copy, as the trusted path already does invgic_flush_lr_state(). The number of implemented list registers isconstant after init, so it is replicated once fromkvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read onevery entry.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm: do file ownership checks with the proper mount idmapEver since idmapped mounts were introduced, inode ownership checks (forside-channel protection) in mincore() and madvise(MADV_PAGEOUT) were doneagainst the nop_mnt_idmap, which completely ignores the file's mount'sidmap. This results in odd edgecases like:1) mount/bind-mount with an idmap userA:userB:12) userB runs an owner_or_capable() check on file that is owned by userAon-disk/in-memory, but owned by userB after idmap translation3) owner_or_capable() mysteriously fails as the correct idmap wasn't suppliedIn the case of mincore/madvise MADV_PAGEOUT, this is usually benign,because file_permission(file, MAY_WRITE) will probably succeed, as it usesthe proper idmap internally, but it does not need to be the case on e.g a0444 file where even the owner itself doesn't have permissions to write toit.Since this is clearly not trivial to get right, introduce afile_owner_or_capable() that can carry the correct semantics, and switchthe various users in mm to it.The issue was found by manual code inspection & an off-list discussionwith Jan Kara.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:exfat: bound uniname advance in exfat_find_dir_entry()In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances theoutput pointer by a fixed amount while the loop guard only tracks theaccumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0;uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_lengrows only by the actual extracted length, which is shorter when a namefragment contains an early NUL. The only guard is`name_len >= MAX_NAME_LENGTH`, so a crafted directory with many shortname fragments lets uniname run far past thep_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small,causing an out-of-bounds read and write at *(uniname+len).The sibling extractor exfat_get_uniname_from_ext_entry() already stopson a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guardadded in commit d42334578eba ("exfat: check if filename entries exceedsmax filename length")); exfat_find_dir_entry() never got theequivalent. Track the per-entry write offset as a count and reject afragment once the offset, or the offset plus the extracted length, wouldexceed MAX_NAME_LENGTH, before forming the output pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFSv4: include MAY_WRITE in open permission mask for O_TRUNCPOSIX requires write permission to truncate a file, so an open() thatspecifies O_TRUNC must be authorized for write access regardless of theO_ACCMODE access mode.nfs_open_permission_mask() builds the access mask passed tonfs_may_open(), which is the local authorization gate for OPENs theclient serves itself from a cached write delegation via thecan_open_delegated() path in nfs4_try_open_cached(). The mask isderived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against afile the caller cannot write requests only MAY_READ and passes thelocal check. The OPEN is then satisfied locally and the truncation isissued to the server as a SETATTR(size=0) over the delegation stateid,which the server accepts under standard write-delegation semantics.POSIX requires that this open fail with EACCES.Include MAY_WRITE in the mask whenever O_TRUNC is set so the localcheck matches the access the server would have enforced.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Prevent out-of-bounds read in glob matchingString event fields are not necessarily NUL-terminated, so the filterpredicate functions (filter_pred_string(), filter_pred_strloc() andfilter_pred_strrelloc()) pass the field length to the regex matchcallbacks, and the length-aware matchers honour it.regex_match_glob() was the exception: it ignored the length and calledglob_match(), which scans the string until it hits a NUL byte. Somestring fields are not NUL-terminated. One example is the dynamic chararray of the xfs_* namespace tracepoints, which is copied without atrailing NUL. For such a field, glob matching reads past the end ofthe event field, causing a KASAN slab-out-of-bounds read inglob_match(), reached via regex_match_glob() and filter_match_preds()from the xfs_lookup tracepoint.Add a length-bounded glob_match_len() and use it from regex_match_glob()so glob matching always stops at the field boundary. The matching loopis factored into a shared helper so glob_match() keeps its behaviour.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()scmi_regulator_probe() calls of_find_node_by_name() which takes areference on the returned device node. On the error path whereprocess_scmi_regulator_of_node() fails, the function returns withoutcalling of_node_put() on the child node, leaking the reference.Add of_node_put(np) on the error path to properly release thereference.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: qat - protect service table iterations with service_lockThe service_table list is protected by service_lock when entries areadded or removed (in adf_service_add() and adf_service_remove()), butseveral functions iterate over the list without holding this lock.A concurrent adf_service_register() or adf_service_unregister() callcould modify the list during traversal, leading to list corruption ora use-after-free.Fix this by holding service_lock across all list_for_each_entry()iterations of service_table in adf_dev_init(), adf_dev_start(),adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),adf_dev_restarted_notify(), and adf_error_notifier().The lock ordering is safe: callers of the static helpers (adf_dev_up()and adf_dev_down()) acquire state_lock before service_lock, and noevent_hld callback or service_lock holder ever acquires state_lock inthe reverse order.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: drbg - Fix returning success on failure in CTR_DRBGdrbg_ctr_generate() sometimes returns success when it fails, leaving theoutput buffer uninitialized. Fix it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: caam - use print_hex_dump_devel to guard key hex dumpsUse print_hex_dump_devel() for dumping sensitive key material in*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUGis enabled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: caam - use print_hex_dump_devel to guard key hex dumpsUse print_hex_dump_devel() for dumping sensitive key material in*_setkey() and gen_split_key() to avoid leaking secrets at runtime whenCONFIG_DYNAMIC_DEBUG is enabled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udf: validate VAT header length against the VAT inode sizeudf_load_vat() takes the virtual partition's start offset straight fromthe on-disk VAT 2.0 header without checking it against the VAT inodesize: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2;lengthHeader is a fully attacker-controlled 16-bit value. If it exceedsthe VAT inode size, the s_num_entries subtraction underflows to a hugecount, which defeats the "block > s_num_entries" bound inudf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block]so a large s_start_offset indexes past the inode's in-ICB data. Mountinga crafted UDF image with a virtual (VAT) partition then triggers anout-of-bounds read.Reject a VAT whose header length does not leave room for at least oneentry within the VAT inode.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:udf: validate free block extents against the partition lengthudf_free_blocks() checks the logical block number and count against thepartition length, but drops the extent offset from that final bound. Acrafted extent can pass the guard while logicalBlockNum + offset + countpoints past the partition, which later indexes past the space bitmaparray.A single ftruncate(2) on a file backed by such an extent reliablypanics the kernel. This is a local availability issue. On desktopsystems where UDisks/polkit allows the active user to mount removableUDF media without CAP_SYS_ADMIN, an unprivileged local user can supplythe crafted filesystem and trigger the panic by truncating a writablefile on it. Systems that require root or CAP_SYS_ADMIN to mount theimage have a higher prerequisite.No confidentiality or integrity impact is claimed: the reproducedprimitive is an out-of-bounds read of a bitmap pointer slot followed bya kernel panic.Use the already computed logicalBlockNum + offset + count value for thepartition length check. Also make load_block_bitmap() reject anout-of-range block group before indexing s_block_bitmap[], so corruptedcallers cannot walk past the flexible array.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usbip: vudc: fix NULL deref in vep_dequeue()vep_alloc_request() wasn't initializing vrequest->udc, so cancellationson the FunctionFS AIO path were arriving in vep_dequeue without a validUDC reference.Since vrequest->udc is never actually properly used anywhere, we opt toremove it, and update vep_dequeue to obtain a reference to the udc withep_to_vudc(), consistent with the other vep_ ops.AFAICT this bug has existed for ~10 years. Seems that nobody has reallystressed the FunctionFS AIO path on usbip's vudc.I tested this fix in a QEMU aarch64 guest driving FunctionFS endpointsvia AIO. Before the fix, running `usbip attach` from the host wouldcause the guest to oops with the following backtrace:Call trace: vep_dequeue+0x1c/0xe4 (P) usb_ep_dequeue+0x14/0x20 ffs_aio_cancel+0x24/0x34 __arm64_sys_io_cancel+0xb0/0x124 do_el0_svc+0x68/0x100 el0_svc+0x18/0x5c el0t_64_sync_handler+0x98/0xdc el0t_64_sync+0x154/0x158
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: ulpi: fix memory leak on registration failureThe allocated device name is never freed on early ULPI deviceregistration failures.Fix this by initialising the device structure earlier and releasing theinitial reference whenever registration fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: keyspan_pda: fix information leakThe write() callback is supposed to return the number of charactersaccepted or a negative errno. Since the addition of write fifo supportthe keyspan_pda implementation will however return the number characterssubmitted to the device if the write urb is not already in use. If thisnumber is larger than the number of characters passed to write(), theline discipline continues writing data from beyond the tty write buffer.Fix the information leak by making sure that keyspan_pda_write_start()returns zero on success as intended.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: iowarrior: fix use-after-free on disconnect racemutex_unlock() may access the mutex structure after releasing the lockand therefore cannot be used to manage lifetime of objects directly(unlike spinlocks and refcounts). [1][2]Use a kref to release the driver data to avoid use-after-free inmutex_unlock() when release() races with disconnect().[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: ldusb: fix use-after-free on disconnect racemutex_unlock() may access the mutex structure after releasing the lockand therefore cannot be used to manage lifetime of objects directly(unlike spinlocks and refcounts). [1][2]Use a kref to release the driver data to avoid use-after-free inmutex_unlock() when release() races with disconnect().[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: udc: Fix use-after-free in gadget_match_driverThe udc structure acts as the management structure for the gadget,but their lifecycles are decoupled. A race condition exists whereusb_del_gadget() frees the udc memory (e.g., via mode-switch work)while gadget_match_driver() concurrently accesses the freed udc memory(e.g., via configfs), causing a Use-After-Free (UAF) that triggers aNULL pointer dereference when the freed memory is zeroed:[39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000[39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140[39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60...[39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8[39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140[39430.931308][ T1171] configfs_write_iter+0xec/0x134[39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode[39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c[39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664Fix this by ensuring the udc structure remains allocated until thegadget is released. To achieve this, introduce a newusb_gadget_release() routine to the core. When the gadget is added,usb_add_gadget() stores the gadget's release routine in the udcstructure and takes a reference to the udc. When the gadget isreleased, usb_gadget_release() drops the reference to the udc andthen calls the gadget's release routine.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Allow LPM map access from sleepable BPF programstrie_lookup_elem() annotates its rcu_dereference_check() walks withonly rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c)resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI andclassic RCU readers but fails for sleepable BPF programs, which entervia __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace().trie_update_elem() and trie_delete_elem() have the same problem in adifferent form: they walk the trie with plain rcu_dereference(), whichasserts rcu_read_lock_held() unconditionally. Both are reachable fromsleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elemhelpers, and from the syscall path under classic rcu_read_lock(). Inthe writer paths the trie is actually protected by trie->lock (anrqspinlock taken across the walk); we never relied on the RCU read-sidelock to keep nodes alive there.A sleepable LSM hook that ends up touching an LPM trie thereforetriggers lockdep on debug kernels: ============================= WARNING: suspicious RCU usage 7.1.0-... Tainted: G E ----------------------------- kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage! 1 lock held by net_tests/540: #0: (rcu_tasks_trace_srcu_struct){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x26/0x280 Call Trace: dump_stack_lvl lockdep_rcu_suspicious trie_lookup_elem bpf_prog_..._enforce_security_socket_connect bpf_trampoline_... security_socket_connect __sys_connect do_syscall_64This is lockdep-only -- no UAF, since Tasks Trace RCU does serializeagainst the trie's reclaim path -- but it spams the console once perdistinct callsite on every debug kernel running a sleepable BPF LSMthat touches an LPM trie, which is increasingly common.For the lookup path, switch the rcu_dereference_check() annotationfrom rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts allthree contexts (classic, BH, Tasks Trace). Other map types alreadyfollow this convention.For trie_update_elem() and trie_delete_elem(), annotate the walks asrcu_dereference_protected(*p, 1) -- matching trie_free() in the samefile -- since trie->lock is held across the walk. rqspinlock has nolockdep_map, so the predicate degenerates to '1' rather thanlockdep_is_held(&trie->lock); the protection is real but notmachine-verifiable. trie_get_next_key() also uses barercu_dereference() but is reachable only from the BPF syscall, whichholds classic rcu_read_lock() before dispatching, so it is leftuntouched.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hfs/hfsplus: zero-initialize buffer in hfs_bnode_readhfs_bnode_read() can return early without writing to the output bufferwhen is_bnode_offset_valid() fails or when check_and_correct_requested_length() corrects the length to zero. Callers such as hfs_bnode_read_u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use theresult unconditionally, leading to KMSAN uninit-value reports.Rather than initializing at each individual call site, zero the bufferat the start of hfs_bnode_read() before any validation checks. Thisensures all callers in both hfs and hfsplus get a deterministic zerovalue regardless of which early-return path is taken.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hfs/hfsplus: fix u32 overflow in check_and_correct_requested_lengthcheck_and_correct_requested_length() compares (off + len) againstnode_size using u32 arithmetic. When the caller passes a large lenvalue (e.g. from an underflowed subtraction in hfs_brec_remove()),off + len can wrap past 2^32 and produce a small result, causing thebounds check to pass when it should fail.For example, with off=14 and len=0xFFFFFFF2 (underflowed fromdata_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,which is less than a typical node_size of 512, so the check passes andthe subsequent memmove reads ~4GB past the node buffer.Fix this by widening the addition to u64 before comparing againstnode_size. This prevents the u32 wrap while keeping the logicstraightforward.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: lg-g15: cancel pending work on remove to fix a use-after-freelg_g15_data is allocated with devm and holds a work item. The reporthandlers schedule that work straight from device input.lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,and lg_g510_leds_event() does it too. The worker dereferences thelg_g15_data back through container_of.The driver had no remove callback and never cancelled the work. So if areport scheduled the work and the keyboard was then unplugged, devresfreed lg_g15_data while the work was still pending or running, and theworker touched freed memory. This is a use-after-free. It is reachableas a race on device unplug.Add a remove callback that cancels the work before devres frees thestate. g15->work is only initialized for the models that schedule it(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard thecancel on g15->work.func to avoid cancelling a work that was never setup. The g15 NULL test mirrors the one already in lg_g15_raw_event().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: appleir: fix UAF on pending key_up_timer in remove()appleir_remove() runs hid_hw_stop() before timer_delete_sync().hid_hw_stop() synchronously unregisters the HID input device viahid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),which drops the last reference and frees the underlying input_dev whenno userspace handle holds it open.key_up_tick() reads appleir->input_dev and calls input_report_key() /input_sync() on it. The timer is armed from appleir_raw_event() witha HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If akey was pressed shortly before the device is disconnected, the timercan fire after hid_hw_stop() has freed input_dev but before theteardown drains it.A simple reorder is not sufficient. Putting the timer drain firststill leaves a window where a USB URB completion (raw_event) runningduring hid_hw_stop() can call mod_timer() and re-arm the timer, whichthen fires after hidinput_disconnect() has freed input_dev. The sameURB-completion window also lets raw_event() reach key_up(), key_down()and battery_flat() directly, all of which dereferenceappleir->input_dev.Introduce a 'removing' flag on struct appleir, gated by the existingspinlock. appleir_remove() sets the flag under the lock and thenshuts down the timer with timer_shutdown_sync(), which both drains anyin-flight callback and permanently disables further mod_timer() calls.appleir_raw_event() and key_up_tick() bail out early if the flag isset, so no path can arm or run the timer, or dereferenceappleir->input_dev, after remove() has started tearing down.The keyrepeat and flatbattery branches of appleir_raw_event()previously called into the input layer without holding the spinlock;take it now so the flag check is well-defined. This incidentallycloses a pre-existing read-side race on appleir->current_key in thekeyrepeat branch.This bug is structurally a sibling of commit 4db2af929279 ("HID:appletb-kbd: fix UAF in inactivity-timer cleanup path") and has beenpresent since the driver was introduced.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: letsketch: fix UAF on inrange_timer at driver unbindletsketch_driver does not provide a .remove callback, butletsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);The timer is re-armed from letsketch_raw_event() with a 100 mstimeout on every pen-in-range report, and its callback dereferencesdata->input_tablet to deliver a synthetic BTN_TOOL_PEN release.letsketch_data is allocated with devm_kzalloc(), and its input_devfields are devm-allocated via letsketch_setup_input_tablet(). Ondevice unbind (USB unplug or rmmod), the HID core runs its defaultteardown and devm cleanup frees both letsketch_data and the inputdevices. Because no .remove callback exists, nothing drains thetimer first: if raw_event armed it within ~100 ms of the unbind,the pending timer fires on freed memory. This is a UAF read ofdata and of data->input_tablet, followed by input_report_key() /input_sync() into the freed input_dev.The same problem can occur on the probe error path: ifhid_hw_start() enabled I/O on an always-poll-quirk device and thenfailed, raw_event may have armed the timer before devm releasesdata.Fix by adding a .remove callback that calls hid_hw_stop() first.hid_hw_stop() synchronously kills the URBs that deliver raw_event(),so once it returns no path can re-arm the timer. timer_shutdown_sync()then drains any in-flight callback and permanently disables furthermod_timer() calls. Apply the same timer_shutdown_sync() in the probeerror path so the timer is guaranteed not to outlive data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/slab: do not limit zeroing to orig_size when only red zoning is enabledWhen init (zeroing) on allocation is requested, for kmalloc() wegenerally have to zero the full object size even if a smaller size isrequested, in order to provide krealloc()'s __GFP_ZERO guarantees.But if we track the requested size, krealloc() uses that information todo the right thing, so we can zero only the requested size. With redzoning also enabled, any extra size became part of the red zone, so itmust not be zeroed and thus we must zero only the requested size.However the current check is imprecise, and will trigger also when onlySLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables trackingthe requested size). This means enabling red zoning alone can compromisekrealloc()'s __GFP_ZERO contract.Fix this by using slub_debug_orig_size() instead, which is the exactcheck for whether the requested size is tracked. We don't need to careif red zoning is also enabled or not. Also update and expand thecomment accordingly.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:proc: protect ptrace_may_access() with exec_update_lock (part 1)Fix the easy cases where procfs currently calls ptrace_may_access() withoutexec_update_lock protection, where the fix is to simply add the extra lockor use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: pcc: fix use-after-free and double free in _OSC evaluationpcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for thetwo-phase _OSC negotiation. Between the two calls it freedoutput.pointer but left output.length unchanged. Sinceacpi_evaluate_object() treats a non-zero length with a non-NULLpointer as an existing buffer to write into, the second call wroteinto freed memory (use-after-free). The subsequent kfree(output.pointer)at out_free then freed the same pointer a second time (double free).Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFERafter freeing the first result, so ACPICA allocates a fresh buffer foreach phase independently.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RTRT migration is done aggressively. When a CPU schedules out a highpriority RT task for a lower priority task, it will look to see if there'sany RT tasks that are waiting to run on another CPU that is of higherpriority than the task this CPU is about to run. If it finds one, it willpull that task over to the CPU and allow it to run there instead.Normally, this pulling is done by looking at the RT overloaded mask (rto)which contains all the CPUs in the scheduler domain with RT tasks that arewaiting to run due to a higher priority RT task currently running on theirCPU. The CPU that is about to schedule a lower priority task will grab therq lock of the overloaded CPU and move the RT task from that CPU's runqueueto the local one and schedule the higher priority RT task.This caused issues when a lot of CPUs would schedule a lower priority taskat the same time. They would all try to grab the same runqueue lock ofthe CPU with the overloaded RT tasks. Only the first CPU that got in willget that task. All the others would wait until they got the runqueue lockand see there's nothing to pull and do nothing. On systems with lots ofCPUs, this caused a large latency (up to 500us) which is beyond whatPREEMPT_RT is to allow.The solution to that was to create an RT_PUSH_IPI logic. When any CPUwanted to pull a task, instead of grabbing the runqueue lock of theoverloaded CPU, it would start by sending an IPI to the overloaded CPU,and that IPI handler would have the CPU with the waiting RT task do a pushinstead. Then that handler would send an IPI to the next CPU withoverloaded RT tasks, and so on. Note, after the first CPU starts thisprocess, if another CPU wanted to do a pull, it would see that the processhas already begun and would only increment a counter to have the IPIscontinue again.The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could causea new issue with non PREEMPT_RT. Namely, softirqs run in a threadedcontext on PREEMPT_RT but they can run in an interrupt context in non-RT.If an IPI lands on a CPU that has just woken up multiple RT tasks and thecurrent CPU is running a non RT or a low priority RT task, instead ofdoing a push, it would simply do a schedule on that CPU. But if a softirqwas also executing on this CPU, the schedule would need to wait until thesoftirq finished. Until then, the CPU would still be considered overloadedas there are RT tasks still waiting to run on it.A live lock occurred on a workload that was doing heavy networking trafficon a large machine where the softirqs would run 500us out of 750us. And itwould also be waking up RT tasks, causing the RT pull logic to beconstantly executed.When a softirq triggered on a CPU with RT tasks queued but not runningyet, and the other CPUs would see this CPU as being overloaded, they wouldsend an IPI over to it. The CPU would notice that the waiting RT tasks areof higher priority than the currently running task and simply schedulethat CPU instead. But because the softirq was executing, before it couldschedule, it would receive another IPI to do the same. The amount of IPIswould slow down the currently running softirq so much that before it couldreturn back to task context, it would execute another softirq neverallowing the CPU to schedule. This live locked that CPU.As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off ifPREEMPT_RT is not enabled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:proc: protect ptrace_may_access() with exec_update_lock (FD links)proc_pid_get_link() and proc_pid_readlink() currently look up the task fromthe pid once, then do the ptrace access check on that task, then look upthe task from the pid a second time to do the actual access.That's racy in several ways.To fix it, pass the task to the ->proc_get_link() handler, and instead ofproc_fd_access_allowed(), introduce a new helper call_proc_get_link() thatlooks up and locks the task, does the access check, and calls->proc_get_link().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: qcom-cpufreq-hw: Fix possible double freeqcom_cpufreq.data is allocated with devm_kzalloc() in probe() as anarray of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer toone element of this array in policy->driver_data.qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.This is not valid because the memory is devm-managed. For the firstdomain, this can free the devm-managed allocation while the devres entryis still active, leading to a possible double free when the platformdevice is later detached. For other domains, the pointer may refer to anelement inside the array rather than the allocation base.Remove the kfree(data) call and let devres release qcom_cpufreq.data.This issue was found by a static analysis tool I am developing.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()When a container exits, the following BUG_ON() is occasionally triggered:================================================================== VFS: Busy inodes after unmount of sdb (ext4) ------------[ cut here ]------------ kernel BUG at fs/super.c:695! CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1 pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : generic_shutdown_super+0xf0/0x100 lr : generic_shutdown_super+0xf0/0x100 Call trace: generic_shutdown_super+0xf0/0x100 kill_block_super+0x20/0x48 ext4_kill_sb+0x28/0x60 deactivate_locked_super+0x54/0x130 deactivate_super+0x84/0xa0 cleanup_mnt+0xa4/0x140 __cleanup_mnt+0x18/0x28 task_work_run+0x78/0xe0 do_notify_resume+0x204/0x240==================================================================The root cause is a race between cgroup_writeback_umount() andinode_switch_wbs()/cleanup_offline_cgwb(). There is a window betweeninode_prepare_wbs_switch() returning true and the subsequentwb_queue_isw() call. Following is the process that triggers the issue: CPU A (umount) | CPU B (writeback)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ inode_switch_wbs/cleanup_offline_cgwb atomic_inc(&isw_nr_in_flight) inode_prepare_wbs_switch -> passes SB_ACTIVE check __iget(inode) generic_shutdown_super sb->s_flags &= ~SB_ACTIVE cgroup_writeback_umount(sb) smp_mb() atomic_read(&isw_nr_in_flight) rcu_barrier() -> no pending RCU callbacks flush_workqueue(isw_wq) -> nothing queued, returns evict_inodes(sb) -> Inode skipped as isw still holds a ref. sop->put_super(sb) /* destroys percpu counters */ -> VFS: Busy inodes after unmount! wb_queue_isw() queue_work(isw_wq, ...) /* later in work function */ inode_switch_wbs_work_fn process_inode_switch_wbs iput() -> evict percpu_counter_dec() // UAF!Fix this by extending the RCU read-side critical section ininode_switch_wbs() and cleanup_offline_cgwb() to cover frominode_prepare_wbs_switch() through wb_queue_isw(). Since there isno sleep in this window, rcu_read_lock() can be used. Then add asynchronize_rcu() in cgroup_writeback_umount() before the existingrcu_barrier(), so that all in-flight switchers that have passed theSB_ACTIVE check have completed queue_work() before flush_workqueue()is called.The existing rcu_barrier() is intentionally retained so this fix canbe backported unchanged to stable kernels (5.10.y, 6.6.y, ...) thatstill queue switches via queue_rcu_work(). It is a no-op on currentmainline (since commit e1b849cfa6b6 ("writeback: Avoid contention onwb->list_lock when switching inodes")) and is removed in a follow-uppatch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: harden POSIX SID length parsingposix_info_sid_size() reads sid[1] to obtain the subauthority count,but its existing boundary check still accepts buffers with only oneremaining byte. Require two bytes before reading sid[1] so all clientpaths that reuse the helper reject truncated POSIX SIDs safely.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix double-free in SMB2_open() replayA response-bearing attempt can return a replayable error and free itsresponse buffer. If SMB2_open_init() fails before the next send, cleanupretains the previous buffer type and frees that response again.Reset response bookkeeping before each attempt to prevent the stale free.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: track the connection owning a byte-range lockSMB2_LOCK adds each granted byte-range lock to both the file lock listand the lock list of the connection which handled the request. Thefinal close and durable handle paths, however, remove the connectionlist entry while holding fp->conn->llist_lock.With SMB3 multichannel, the connection handling the LOCK request can bedifferent from the connection which opened the file. The entry cantherefore be removed under a different spinlock from the one protectingthe list it belongs to. A concurrent traversal can then access freedstruct ksmbd_lock and struct file_lock objects.Record the connection owning each lock's clist entry and hold areference to it while the entry is linked. Use that connection and itsllist_lock for unlock, rollback, close, and durable preserve. Durablereconnect assigns the new connection as the owner when publishing thelocks again.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITYcommit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding apermission check for FSCTL_SET_SPARSE") added a fp->daccess gate tofsctl_set_sparse and noted that "similar handle-level checks exist in otherfunctions but are missing here." The SMB2 SET_INFO SECURITY arm is one ofthe missing ones, and the most security-relevant: smb2_set_info_sec() callsset_info_sec() with no per-handle access check.set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: itrewrites owner/group/mode via notify_change(), rewrites the POSIX ACL viaset_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes andrewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr().Every other persistent-mutation arm of the sibling handlersmb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA /FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm -which mutates the access control itself - is the only one with no gate.A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (noFILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoTypeSMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itselfaccess the handle's daccess never carried. Unlike the FSCTL data arms thisis a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop -the missing fp->daccess check is the entire gate.Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, sorequire at least one of those on the handle before re-permissioning thefile. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellationWhen a blocking byte-range lock request is deferred in theFILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work intothe connection's async_requests list via setup_async_work(). The cancelcallback smb2_remove_blocked_lock() holds a reference to the flock.If the lock waiter is subsequently woken up but the work state is nolonger KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), thecleanup path calls locks_free_lock(flock) without dequeuing the work fromthe async_requests list. Concurrently, smb2_cancel() walks the listunder conn->request_lock and invokes the cancel callback, which thendereferences the already freed 'flock'. This leads to a slab-use-after-freeinside __wake_up_common.Fix this by restructuring the cleanup logic after the worker returnsfrom ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) andrelease_async_work(work) to the top of the cleanup block. This guaranteesthat the async work is completely dequeued and serialized underconn->request_lock before locks_free_lock(flock) is called, renderingthe flock unreachable for any concurrent smb2_cancel().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: add a permission check for FSCTL_SET_ZERO_DATAFSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data viaksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) afterchecking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with noper-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTESstill yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part ofFILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens itO_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; onlythe missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 withKASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handlezeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to(6/6; a FILE_READ_DATA-only handle was correctly denied).This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTLpermission bypass by adding a permission check for FSCTL_SET_SPARSE").Because SET_ZERO_DATA writes data (not an attribute), requireFILE_WRITE_DATA.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: prevent path traversal bypass by restricting caseless retryksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict pathresolution within the share root. When a crafted path attempts toescape the share boundary using parent-directory components ('..'),vfs_path_parent_lookup() detects this and immediately fails,returning -EXDEV.However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.The function fails to intercept the -EXDEV error and erroneouslyfalls through to the caseless retry logic, which is intended onlyfor genuinely missing files. During this retry process, the pathis reconstructed, leading to an unintended LOOKUP_BENEATH bypassthat allows write-capable users to create zero-length files ordirectories outside the exported share.Fix this by ensuring that the execution only proceeds to the caselesslookup retry when the error is specifically -ENOENT. Any other errors,such as -EXDEV from a path traversal attempt, must be returned immediately.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: resolve SWN tcon from live registrationscifs_swn_notify() looks up a witness registration by id undercifs_swnreg_idr_mutex, drops the mutex, and then uses the registration'scached tcon pointer. That pointer is not a lifetime reference, and it isnot a stable representative once cifs_get_swn_reg() lets multiple tconsfor the same net/share name share one registration id.A same-share second mount can keep the cifs_swn_reg alive after the firsttcon unregisters and is freed. The registration then still points at thefreed first tcon, so taking tc_lock or incrementing tc_count throughswnreg->tcon only moves the use-after-free earlier. Taking tc_lock whileholding cifs_swnreg_idr_mutex also violates the documented CIFS lockorder.Fix this by making the registration store only the stable witnessidentity: id, net name, share name, and notify flags. When a notifyarrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex,then find and pin a live witness tcon that currently matches the net/sharepair under the normal cifs_tcp_ses_lock -> tc_lock order. The notificationpath uses that pinned tcon directly and drops the reference when done.Registration and unregister messages now use the live tcon passed by thecaller instead of a cached tcon in the registration. The final unregistersend is folded into cifs_swn_unregister() while the registration is stillprotected by cifs_swnreg_idr_mutex. This removes the previousfind/drop/reacquire raw-pointer window. The release path only removes theidr entry and frees the stable identity strings.This preserves the intended one-registration/many-tcon behavior: aregistration id represents a net/share pair, and notify handling acts on alive representative selected at use time. It also preserves CLIENT_MOVEordering for the representative tcon because the old-IP unregister is sentbefore cifs_swn_register() sends the new-IP register.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()When the SMB sink is used as a perf AUX sink, smb_update_buffer() callssmb_sync_perf_buffer() to copy hardware trace data into the perf AUX ringbuffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which ishandle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pagesnormalization is only applied after the first loop iteration.This leaves the initial page index underived from the buffer size, whichcan result in an out-of-bounds write past dst_pages[] when head exceedsthe AUX buffer size.Normalize head modulo the AUX buffer size before deriving the page indexand offset, mirroring tmc_etr_sync_perf_buffer().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connectionwas pending, but hdev->sent_cmd can be NULL while req_status is stillHCI_REQ_PEND, leading to a NULL pointer dereference and a generalprotection fault from the hci_rx_work() receive path.Instead of inspecting hdev->sent_cmd, track the in-flight createconnection command with a new per-connection HCI_CONN_CREATE flag androute all cancellation through hci_cancel_connect_sync(), whichdispatches to a dedicated per-type cancel function. The create commandis in exactly one of two states: still queued, or in flight. The cancelfunction holds cmd_sync_work_lock across the whole decision: the workertakes this lock to dequeue every entry, so while it is held a queuedcommand cannot start running and an in-flight command cannot completeand let the next command become pending. This keeps the flag test andhci_cmd_sync_cancel() atomic with respect to the worker, so a queuedcommand is simply dequeued, and an in-flight command owned by thisconnection is cancelled without the risk of cancelling an unrelatedcommand that became pending in the meantime. CIS uses the same flagmechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.hci_acl_create_conn_sync() and hci_le_create_conn_sync() clearHCI_CONN_CREATE after the create command completes, but the commandstatus handler can free conn via hci_conn_del() (for example when thecontroller rejects the connection) while the worker is still blocked onthe connection complete event. Hold a reference on conn across thecreate command so the flag can be cleared without a use-after-free.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: fix UAF in bt_accept_dequeue()bt_accept_get() takes a temporary reference before dropping the acceptqueue lock. bt_accept_dequeue() currently drops that reference beforebt_accept_unlink(), leaving only the queue reference.bt_accept_unlink() drops the queue reference. The subsequentsock_hold() therefore accesses freed memory if it was the finalreference, as observed by KASAN during listening L2CAP socket cleanup.Retain the temporary queue-walk reference through unlink and hand it tothe caller on success. Drop it explicitly on the closed andnot-yet-connected paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()During the v3 firmware download the controller sends a v3_data_req with a32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lowerbound of the offset and then sends firmware from that offset. nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction; serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + nxpdev->fw_dnld_v3_offset, len);Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,so a controller that asks for an offset or length past the firmware imagemakes the driver read past the end of nxpdev->fw->data and send thatmemory back over UART.nxp_recv_fw_req_v1() already bounds the same write. Add the equivalentcheck to the v3 path, reject the request when it falls outside the firmwareimage, and zero len on the error path so the fw_v3_prev_sent bookkeeping atfree_skb stays consistent.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btmtksdio: fix infinite loop in btmtksdio_txrx_work()Every once in a while we see a hung btmtksdio_flush() task: INFO: task kworker/u17:0:189 blocked for more than 122 seconds. __cancel_work_timer+0x3f4/0x460 cancel_work_sync+0x1c/0x2c btmtksdio_flush+0x2c/0x40 hci_dev_open_sync+0x10c4/0x2190 [..]It all boils down to incorrect time_is_before_jiffies() usage inbtmtksdio_txrx_work(). The btmtksdio_txrx_work() loop is expectedto be terminated if running for longer than 5*HZ. However thetimeout check is twisted: time_is_before_jiffies(old_jiffies + 5*HZ)evaluates to true when old_jiffies + 5*HZ is in the past i.e. when atimeout has occurred. Using OR with time_is_before_jiffies(txrx_timeout)means that:- before the 5-second timeout: the condition is `int_status || false`, so it loops as long as there are pending interrupts.- after the 5-second timeout: the condition becomes `int_status || true`, which is always true.When the loop becomes infinite btmtksdio_txrx_work() loop neverterminates and never releases the SDIO host.Fix loop termination condition to actually enforce a 5*HZ timeout.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm: shrinker: fix NULL pointer dereference in debugfsshrinker_debugfs_add() creates both "count" and "scan" debugfs filesunconditionally.That assumes every shrinker implements both count_objects() andscan_objects(), which is not guaranteed. For example, the xen-backendshrinker sets count_objects() but leaves scan_objects() NULL, so writingto its scan file calls through a NULL function pointer and panics thekernel:BUG: kernel NULL pointer dereference, address: 0000000000000000RIP: 0010:0x0Code: Unable to access opcode bytes at 0xffffffffffffffd6.Call Trace: shrinker_debugfs_scan_write+0x12e/0x270 full_proxy_write+0x5f/0x90 vfs_write+0xde/0x420 ? filp_flush+0x75/0x90 ? filp_close+0x1d/0x30 ? do_dup2+0xb8/0x120 ksys_write+0x68/0xf0 ? filp_flush+0x75/0x90 do_syscall_64+0xb3/0x5b0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe count path has the same issue in principle if a shrinker omitscount_objects().To fix it, only create "count" and "scan" debugfs files when thecorresponding callbacks are present.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mfd: cros_ec: Delay dev_set_drvdata() until probe successIf ec_device_probe() fails, cros_ec_class_release releases memory for thecros_ec_dev structure. However, because the drvdata was already set,sub-drivers like cros_ec_typec can still retrieve the stale pointer via theplatform device. This leads to a use-after-free when cros_ec_typec attemptsto access &typec->ec->ec->dev on a device that has already been released.Move dev_set_drvdata() to ensure that the pointer is only made availableonce all initialization steps have succeeded. sysfs: cannot create duplicate filename '/class/chromeos/cros_ec' Call trace: sysfs_do_create_link_sd+0x94/0xdc sysfs_create_link+0x30/0x44 device_add_class_symlinks+0x90/0x13c device_add+0xf0/0x50c ec_device_probe+0x150/0x4f0 platform_probe+0xa0/0xe0 ... BUG: KASAN: invalid-access in __memcpy+0x44/0x230 Write at addr f5ffff809e2d33ac by task kworker/u32:5/125 Pointer tag: [f5], memory tag: [fe] Tainted : [W]=WARN, [O]=OOT_MODULE Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3 Workqueue: events_unbound deferred_probe_work_func Call trace: __memcpy+0x44/0x230 cros_ec_check_features+0x60/0xcc [cros_ec_proto] cros_typec_probe+0xe8/0x6e0 [cros_ec_typec] platform_probe+0xa0/0xe0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: nxp: imx8-isi: Fix use-after-free on removeKASAN reports a slab-use-after-free in __media_entity_remove_link()during rmmod of imx8_isi: BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650 Read of size 2 at addr ffff0000d47cb02a by task rmmod/724 Call trace: __media_entity_remove_link+0x608/0x650 __media_entity_remove_links+0x78/0x144 __media_device_unregister_entity+0x150/0x280 media_device_unregister_entity+0x48/0x68 v4l2_device_unregister_subdev+0x158/0x300 v4l2_async_unbind_subdev_one+0x22c/0x358 v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0 v4l2_async_nf_unregister+0x5c/0x14c mxc_isi_remove+0x124/0x2a0 [imx8_isi] Allocated by task 249: __kmalloc_noprof+0x27c/0x690 mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi] Freed by task 724: kfree+0x1e4/0x5b0 mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi] mxc_isi_remove+0x11c/0x2a0 [imx8_isi]The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup()before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the mediaentity pads, but the subsequent v4l2 cleanup still tries to removemedia links that reference those pads.Fix this by calling mxc_isi_v4l2_cleanup() beforemxc_isi_crossbar_cleanup() to ensure all media entities are properlyunregistered while the pads are still valid.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipv4: bound TCP reordering sysctl writes and MTU probe sizesReject invalid `net.ipv4.tcp_reordering` values before they reach TCPsocket state. The sysctl is stored as an `int` but copied into the`u32` `tp->reordering` field for new sockets, so negative writes wrapto large values.With `tcp_mtu_probing=2`, the wrapped value can overflow the`tcp_mtu_probe()` size calculation and drive the MTU probing path intoan out-of-bounds read. Route `tcp_reordering` writes through`proc_dointvec_minmax()` and require it to be at least 1. Also require`tcp_max_reordering` to be at least 1 so the configured maximum cannotbecome negative either.When registering the table for a non-init network namespace, relocate`extra2` pointers that refer into `init_net.ipv4` so the`tcp_reordering` upper bound follows that namespace's`tcp_max_reordering`.Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.This keeps the send queue and window checks from being bypassed throughsigned integer overflow.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: igmp: remove multicast group from hash table on device destructionWhen a device is destroyed under RTNL, ip_mc_destroy_dev() iterates throughthe multicast list and calls ip_ma_put() on each membership, schedulingthem for RCU reclamation. However, they are not unlinked from the device'smulticast hash table (mc_hash).Since the device remains published in dev->ip_ptr until afterip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hashcan still locate and access the multicast group after its refcount isdecremented. If the RCU callback runs and frees the group while a reader isaccessing it, a use-after-free occurs.Fix this by unlinking the multicast group from mc_hash usingip_mc_hash_remove() before scheduling it for reclamation.BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276Call Trace: dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netpoll: fix a use-after-free on shutdown pathThere is a use-after-free error on netpoll, which is clearly detected byKASAN. BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80 Read of size 1 at addr ... by task kworker/9:1 Workqueue: events queue_process Call Trace: skb_dequeue+0x1e/0xb0 queue_process+0x2c/0x600 process_scheduled_works+0x4b6/0x850 worker_thread+0x414/0x5a0 Allocated by task 242: __netpoll_setup+0x201/0x4a0 netpoll_setup+0x249/0x550 enabled_store+0x32f/0x380 Freed by task 0: kfree+0x1b7/0x540 rcu_core+0x3f8/0x7a0The problem happens when there is a pending TX worker running inparallel with the cleanup path.This is what happens on netpoll shutdown path:1) __netpoll_cleanup() is called2) set dev->npinfo to NULL3) call_rcu() with rcu_cleanup_netpoll_info() 3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with cancel_delayed_work(), but doesn't wait for the worker to finish4) and kfree(npinfo);Because 3.1) doesn't really cancel the work, as the comment says "wecan't call cancel_delayed_work_sync here, as we are in softirq", the TXworker can run after 4).Tl;DR: queue_process() is not an RCU reader, it reaches npinfo throughthe work item via container_of().Use disable_delayed_work_sync() to ensure the worker is completelystopped and prevent any future re-arming attempts. Once npinfo is setto NULL, senders will bail out and not queue new work. The disable flagensures any in-flight re-arming attempts also fail silently.In the future, we can do the cleanup inline here without needing thenpinfo->rcu rcu_head, but that is net-next material.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: sch: use raw_spinlock_t in the irq startup pathsch_irq_unmask() enables the GPIO IRQ and then updates the controllerstate through sch_irq_mask_unmask(), which takes sch->lock withspin_lock_irqsave(). The callback can be reached from irq_startup()while setting up a requested IRQ. That path is not sleepable, but onPREEMPT_RT a regular spinlock_t becomes a sleeping lock.This issue was found by our static analysis tool and then manuallyreviewed against the current tree.The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier andused the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported: BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv]Convert the SCH controller lock to raw_spinlock_t. The same lock isalso used by the GPIO direction and value callbacks, but those criticalsections only update MMIO-backed GPIO registers and do not containsleepable operations. Keeping this register lock non-sleeping istherefore appropriate for the irqchip callbacks and does not change theGPIO-side locking contract.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: eic-sprd: use raw_spinlock_t in the irq startup pathsprd_eic_irq_unmask() enables the GPIO IRQ and then updates controllerstate through sprd_eic_update(), which takes sprd_eic->lock withspin_lock_irqsave(). The callback can be reached from irq_startup()while setting up a requested IRQ. That path is not sleepable, but onPREEMPT_RT a regular spinlock_t becomes a sleeping lock.This issue was found by our static analysis tool and then manuallyreviewed against the current tree.The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier andused the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv] sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv]Convert the Spreadtrum EIC controller lock to raw_spinlock_t. Thelocked section only serializes MMIO register updates and does not containsleepable operations, so keeping it non-sleeping is appropriate for theirqchip callbacks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcnsIn the analysis pass of $LogFile journal replay, log_replay() copiesLCNs from each action log record into an existing Dirty Page Table(DPT) entry without bounding the destination index. A crafted NTFSimage with DPT entry lcns_follow=1 and an action log record withlcns_follow=2 produces a kernel slab out-of-bounds write at mounttime: BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60 Write of size 8 at addr ffff8880095e1040 by task mountTwo attacker-controlled fields can drive j+i past the allocatedpage_lcns[] array: 1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow. 2. lrh->target_vcn may be smaller than dp->vcn, making the u64 subtraction wrap to a huge size_t.Validate target VCN delta and per-record LCN count against theDPT entry capacity, bail via the existing out: cleanup label with-EINVAL.This mirrors the bounds-check pattern added in commit b2bc7c44ed17("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot")and commit 0ca0485e4b2e ("fs/ntfs3: validate rec->used injournal-replay file record check").
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_completeadd_device_complete() runs from the hci_cmd_sync_work kworker, whichholds only hci_req_sync_lock and *not* hci_dev_lock. It callshci_conn_params_lookup() and then dereferences the returned object(params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0);hci_conn_params_lookup() walks hdev->le_conn_params and is documented torequire hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE(remove_device()), which does run under hci_dev_lock, can callhci_conn_params_free() to list_del() and kfree() the very object thelookup returned, so the subsequent params->flags read touches freedmemory [0].Hold hci_dev_lock() across the hci_conn_params_lookup() and the read ofparams->flags (and the matching event emission) so the lookup resultcannot be freed by a concurrent remove_device() before it is used,honouring the locking contract of hci_conn_params_lookup().[0]: (trailing page/memory-state dump trimmed)BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPTHardware name: linux,dummy-virt (DT)Workqueue: hci0 hci_cmd_sync_workCall trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x118/0x5d8 mm/kasan/report.c:482 kasan_report+0xb0/0xf4 mm/kasan/report.c:595 __asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378 add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334 process_one_work+0x628/0xd38 kernel/workqueue.c:3289 process_scheduled_works kernel/workqueue.c:3372 [inline] worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453 kthread+0x39c/0x444 kernel/kthread.c:436 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860Allocated by task 3401: kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57 kasan_save_track+0x20/0x3c mm/kasan/common.c:78 kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279 hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline] add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755 hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline] hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe0/0x128 net/socket.c:742 sock_write_iter+0x250/0x390 net/socket.c:1195 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x66c/0xab0 fs/read_write.c:688 ksys_write+0x1fc/0x24c fs/read_write.c:740 __do_sys_write fs/read_write.c:751 [inline] __se_sys_write fs/read_write.c:748 [inline] __arm64_sys_write+0x70/0xa4 fs/read_write.c:748 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151 el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724 el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596Freed by task 3740: kasan_save_stack+0x3c/0x64 ---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:audit: Fix data races of skb_queue_len() readers on audit_queueMultiple readers access audit_queue.qlen via skb_queue_len() withoutholding the queue lock or using READ_ONCE(), while kauditd writes tothis field via the skb_dequeue() -> __skb_unlink() path with WRITE_ONCE()protected by a spinlock. This constitutes data races.All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn()KCSAN reports the following conflicting access pattern (one example):==================================================================BUG: KCSAN: data-race in audit_log_start / skb_dequeuewrite (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0value changed: 0x00000001 -> 0x00000000==================================================================Resolve the race by switching to lockless helper skb_queue_len_lockless(),which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()write accesses already present on the writer side.[PM: line length tweak]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: af_key: initialize alg_key_len for IPComp statespfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case byallocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt;Unlike the authentication (x->aalg) and encryption (x->ealg) branches ofthe same function, the compression branch never initializescalg->alg_key_len. IPComp carries no key and the allocation onlyreserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the fieldis left containing uninitialized slab data.calg->alg_key_len is later used as a length by xfrm_algo_clone() when anIPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig));where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. Witha non-zero garbage alg_key_len, kmemdup() reads past the end of the68-byte calg object. Adding an IPComp SA via PF_KEY and then migratingit triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4)Depending on the uninitialized value the same field can instead requestan oversized kmemdup() allocation and make the migration clone fail.The XFRM netlink path is not affected: verify_one_alg() rejects anXFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added viaXFRM_MSG_NEWSA is always self-consistent.Initialize calg->alg_key_len to 0, matching the aalg/ealg branches.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: qat - fix VF2PF work teardown race in adf_disable_sriov()The VF2PF interrupt handler queues PF-side response work that stores araw pointer to per-VF state (struct adf_accel_vf_info). Currently,adf_disable_sriov() destroys per-VF mutexes and frees vf_info withoutstopping new VF2PF work or waiting for in-flight workers to complete. Aconcurrently scheduled or already queued worker can then dereferencefreed memory.This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670Add a PF-local flag, vf2pf_disabled, that gates work queueing, workerprocessing, and interrupt re-enabling during teardown. Set this flagatomically with the hardware interrupt mask insideadf_disable_all_vf2pf_interrupts(). After masking, synchronize the AEcluster MSI-X interrupt and flush the PF response workqueue beforetearing down per-VF locks and state so all in-flight work completesbefore vf_info is destroyed.Introduce adf_enable_all_vf2pf_interrupts() to clear the flag andunmask all VF2PF interrupts under the same lock when SR-IOV isre-enabled. This ensures the software flag and hardware state transitionatomically on both the enable and disable paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()Two IE parsing loops are missing the header bounds checks before theydereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions.Both buffers are filled from AP beacon and probe-response frames, so amalicious AP that sends a truncated final IE can trigger the issue.Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Break if the IE's declared data extends past the buffer end.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix OOB read in update_beacon_info() IE loopThe IE parsing loop in update_beacon_info() advances by(pIE->length + 2) each iteration but only guards on i < len.When a malicious AP sends a Beacon whose last IE has only one byteremaining in the frame (the element_id byte lands at len-1), the loopreads pIE->length from one byte past the allocated receive buffer.Additionally, even when the header bytes are in bounds, pIE->lengthitself can extend the data window beyond len, passing a truncated IEto the handler functions.Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past len.Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->lengthfor consistency with the sizeof(*pIE) guards added above.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()OnAuth() has two bugs in the shared-key authentication path.When the Privacy bit is set, rtw_wep_decrypt() is called withoutverifying that the frame is long enough to contain a valid WEP IV andICV. Inside rtw_wep_decrypt(), length is computed as: length = len - WLAN_HDR_A3_LEN - iv_lenand then passed as (length - 4) to crc32_le(). If len is less thanWLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negativeand, after the implicit cast to size_t, causes crc32_le() to read farbeyond the frame buffer. Add a minimum length check before accessingthe IV field and calling the decryption path.When processing a seq=3 response, rtw_get_ie() stores the ChallengeText IE length in ie_len, but the subsequent memcmp() always reads 128bytes regardless of ie_len. IEEE 802.11 mandates a challenge text ofexactly 128 bytes; reject any IE whose length field differs, matchingthe check already applied to OnAuthClient().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()supplicant_ie is a 256-byte array in struct security_priv. The WPA andWPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2);where wpa_ielen is the raw IE length field (u8, 0-255). When a local usersupplies a connect request via nl80211 with a crafted WPA IE of length 255,wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte intothe adjacent last_mic_err_time field.rtw_parse_wpa_ie() does not prevent this: its length consistency checkcompares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255when wpa_ie_len = 257, so the check passes silently.Add explicit bounds checks for both the WPA and WPA2 paths before thememcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds thesupplicant_ie buffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: restrict implied bcc[0] exemption to responses without data areasmb2_check_message() has a long-standing quirk that accepts a responsewhose calculated length is one byte larger than the bytes actuallyreceived ("server can return one byte more due to implied bcc[0]").This was introduced to accommodate servers that omit the trailing bcc[0]overlap byte when no data area is present.However, the exemption is applied unconditionally, regardless of whetherthe command actually carries a data area (has_smb2_data_area[]). When aresponse with a data area is subject to the +1 exemption, the reporteddata can extend one byte beyond the bytes actually received, yetsmb2_check_message() still accepts it. The subsequent decoder then readspast the end of the receive buffer. This is reachable during NEGOTIATEand SESSION_SETUP, before the session is established.The resulting out-of-bounds reads are visible under KASAN when mountingagainst a non-conforming server; both the SPNEGO/negTokenInit and theNTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448Restrict the +1 exemption to responses that have no data area, so thatit still covers the bcc[0] omission it was meant for. When a data areais present, the +1 discrepancy instead means the reported data lengthoverruns the---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: vme_user: bound slave read/write to the kern_buf sizeThe SLAVE-path helpers buffer_to_user() and buffer_from_user() copy'count' bytes into/out of the fixed-size kern_buf (size_buf ==PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, withoutbounding *ppos + count against size_buf.vme_user_write()/vme_user_read() only clamp count to the VME window size(image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from theuser-supplied slave.size -- validated against the VME address space (upto VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the windowexceeds 128 KiB, a write()/read() copies past the kern_buf allocation.Clamp count against size_buf in both helpers, with an early return when*ppos is already at/after the buffer end. *ppos is >= 0 here (the callerrejects negative offsets), so size_buf - *ppos cannot wrap. This mirrorsthe existing clamp in the MASTER-path helpers resource_to_user() /resource_from_user(), and matches the read()/write() convention of ashort transfer at end-of-buffer.Found by static analysis (CodeQL taint tracking + CBMC bounded modelchecking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:6lowpan: fix NHC entry use-after-free on error pathlowpan_nhc_do_uncompression() looks up an NHC descriptor while holdinglowpan_nhc_lock. If the descriptor has no uncompress callback, the errorpath drops the lock before printing nhc->name.lowpan_nhc_del() removes descriptors under the same lock and then relieson synchronize_net() before the owning module can be unloaded. That onlywaits for net RX RCU readers. lowpan_header_decompress() is also exportedand can be reached from callers that are not necessarily covered by the netcore RX critical section, for example the Bluetooth 6LoWPAN L2CAP receivepath.This leaves a race where one task drops lowpan_nhc_lock in the error path,another task unregisters and frees the matching descriptor aftersynchronize_net() returns, and the first task then dereferences nhc->namefor the warning.With the post-unlock window widened, KASAN reports: BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220 Read of size 8 lowpan_nhc_do_uncompression lowpan_header_decompressFix this by printing the warning before dropping lowpan_nhc_lock, so thedescriptor name is read while unregister is still excluded. The malformedpacket is still rejected with -ENOTSUPP.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: dwc3: run gadget disconnect from sleepable suspend contextdwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then callsdwc3_disconnect_gadget(). For async callbacks that helper only usesplain spin_unlock()/spin_lock(), so the gadget ->disconnect() callbackstill runs with IRQs disabled and any sleepable callback trips Lockdep.This issue was found by our static analysis tool and then manuallyreviewed against the current tree.The grounded PoC kept the dwc3_gadget_suspend() ->dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, andLockdep reported: BUG: sleeping function called from invalid context gadget_disconnect+0x21/0x39 [vuln_msv] dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv]Keep the disconnect callback selection in one common helper, but add asleepable suspend-side wrapper which snapshots the callback underdwc->lock and then runs it after spin_unlock_irqrestore(). The regularevent path still uses the existing spin_unlock()/spin_lock() window.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: chaoskey: Fix slab-use-after-free in chaoskey_release()The chaoskey driver has a use-after-free bug in its release routine.If the user closes the device file after the USB device has beenunplugged, a debugging log statement will try to access theusb_interface structure after it has been deallocated: BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406) Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106 Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dev_driver_string (drivers/base/core.c:2406) __dynamic_dev_dbg (lib/dynamic_debug.c:906) chaoskey_release (drivers/usb/misc/chaoskey.c:323) __fput (fs/file_table.c:510) fput_close_sync (fs/file_table.c:615) __x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)The driver's last reference to the interface structure is dropped inthe chaoskey_free() routine, so the code must not use the interface --even in a debugging statement -- after that routine returns.(Exception: If we know that another reference is held by someone else,such as the device core while the disconnect routine runs, there's noproblem. Thanks to Johan Hovold for pointing this out.)Since the bad access is part of an unimportant debugging statement,we can fix the problem simply by removing the whole statement.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hwrng: virtio: clamp device-reported used.len at copy_data()random_recv_done() stores the device-reported used.len directly intovi->data_avail. copy_data() then indexes vi->data[] usingvi->data_idx (advanced by previous copy_data() calls) and issues amemcpy() without re-validating either value against the postedbuffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32or 64).A malicious or buggy virtio-rng backend can set used.len beyondsizeof(vi->data), steering the memcpy() past the end of the inlinearray into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixesthose bytes into the guest RNG, and guest root can also observethem directly via /dev/hwrng.Concrete impact is inside the guest: - Memory-safety / hardening: any virtio-rng backend that over-reports used.len causes the driver to read past vi->data into unrelated slab contents. hwrng_fillfn() is a kernel thread that runs as soon as the device is probed; no guest userspace interaction is required to first-trigger the OOB. - Cross-boundary leak (confidential-compute threat model): a malicious hypervisor cooperating with a malicious or compromised guest root userspace can use /dev/hwrng as a leak channel for guest-kernel heap data. The host sets a large used.len, guest root reads /dev/hwrng, and the returned bytes contain guest kernel slab contents that were adjacent to vi->data. In practice, confidential-compute guests (SEV-SNP, TDX) usually disable virtio-rng entirely, so this path is narrow, but the fix is still worth carrying because the underlying memory-safety bug contaminates the guest RNG on any host.KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backendhas been patched to report used.len = 0x10000: BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0 Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52 Call Trace: __asan_memcpy+0x23/0x60 virtio_read+0x394/0x5d0 hwrng_fillfn+0xb2/0x470 kthread+0x2cc/0x3a0 Allocated by task 1: probe_common+0xa5/0x660 virtio_dev_probe+0x549/0xbc0 The buggy address belongs to the object at ffff88800ae0b800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes to the right of allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20)Same class of bug as commit c04db81cd028 ("net/9p: Fix bufferoverflow in USB transport layer"), which hardenedusb9pfs_rx_complete() against unchecked device-reported length inthe USB 9p transport.With the clamp at point of use and array_index_nospec() in place,the same harness boots cleanly: copy_data() returns zero for thebogus report, the device-supplied bytes after data_idx arediscarded, and the driver issues a fresh request.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: tcpci_rt1711h: unregister TCPCI port with devresrt1711h_probe() registers the TCPCI port before requesting the interruptand enabling alert interrupts. If either of those later steps fails, theprobe function returns without unregistering the TCPCI port. The explicitunregister currently only happens from the remove callback.Register a devres action immediately after tcpci_register_port() succeeds,so tcpci_unregister_port() runs on later probe failures and on driverdetach. Drop the remove callback to avoid unregistering the same porttwice.This issue was identified during our ongoing static-analysis research whilereviewing kernel code.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:binder: fix UAF in binder_free_transaction()In binder_free_transaction(), the t->to_proc is read under the t->lock.However, once the t->lock is dropped, the to_proc can die in parallel.This leads to a use-after-free error when we attempt to acquire itsinner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ==================================================================To prevent this, pin the target thread (t->to_thread) to guarantee thetarget process remains alive. Undelivered transactions without a targetthread are already safe, as the target process can only be the currentcontext in those paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:binder: fix UAF in binder_thread_release()When a thread exits, binder_thread_release() walks its transaction stackto clear the t->from and t->to_proc that correspond with the exitingthread. However, a process dying in parallel might attempt to kfree someof these transactions. And if one of them has no associated t->to_proc,the t->to_proc->inner_lock will not be acquired.This means that transaction accesses in binder_thread_release() aftert->to_proc has been cleared might race with binder_free_transaction()and cause a use-after-free error as reported by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798 Write of size 8 at addr ffff000016627500 by task X/715 CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_thread_release+0x5d0/0x798 binder_ioctl+0x12c0/0x299c [...] Allocated by task 717 on cpu 18 at 67.267803s: __kasan_kmalloc+0xa0/0xbc __kmalloc_cache_noprof+0x174/0x444 binder_transaction+0x554/0x8150 binder_thread_write+0xa30/0x4354 binder_ioctl+0x20f0/0x299c [...] Freed by task 202 on cpu 18 at 90.416221s: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_free_transaction+0x150/0x294 binder_send_failed_reply+0x398/0x6d8 binder_release_work+0x3e4/0x4ec binder_deferred_func+0xbd8/0x104c [...] ==================================================================In order to avoid this, make sure that binder_free_transaction() readsthe t->to_proc under the transaction lock. This will serialize thetransaction release with the accesses in binder_thread_release(). Plus,it matches the documented locking rules for @to_proc.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btusb: fix use-after-free on marvell probe failureMake sure to stop any TX URBs submitted during Marvell OOB wakeupconfiguration on later probe failures to avoid use-after-free in thecompletion callback.This issue was reported by Sashiko while reviewing a fix for a wakeupsource leak in the btusb probe errors paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btusb: fix use-after-free on registration failureMake sure to release the sibling interfaces in case controllerregistration fails to avoid use-after-free and double-free when they areeventually disconnected.This issue was reported by Sashiko while reviewing a fix for a wakeupsource leak in the btusb probe errors paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vfio/mlx5: Fix racy bitfields and tighten struct layoutBitfield operations are not atomic, they use a read-modify-writepattern, therefore we should be careful not to pack bitfields thatcan be concurrently updated into the same storage unit.This split takes a binary approach: flags that are only modifiedpre/post open/close remain bitfields, flags modified from useraction, including actions that reach across to another device (ex.reset) use dedicated storage units.Note mlx5_vhca_page_tracker.status is relocated to fill the alignmenthole this split exposes.Bitfield justifications: migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probeDedicated storage units: mdev_detach: written in the VF attach/detach event notifier mlx5fv_vf_event() at runtime log_active: written in mlx5vf_start_page_tracker()/ mlx5vf_stop_page_tracker() during runtime dirty tracking deferred_reset: written in mlx5vf_state_mutex_unlock()/ mlx5vf_pci_aer_reset_done() during runtime reset handling is_err: set by tracker error handling and dirty-log polling at runtime object_changed: set by tracker event handling and cleared by dirty-log polling at runtime
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arcvfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,looping to skip optional states the device does not support until*next_fsm is supported. A blocked transition is encoded asVFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.The skip loop does not account for the ERROR sentinel.state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] isERROR, so once *next_fsm becomes ERROR the loop condition stays true and*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY andSTOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on aprecopy-capable device, causing the loop to spin forever while holdingthe driver state mutex. This can result in a soft lockup, and a panicwith softlockup_panic set.Terminate the skip loop on the ERROR sentinel so a blocked transitionfalls through to the existing return and reports -EINVAL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vfio/pci: Latch disable_idle_d3 per deviceWhen disable_idle_d3 was introduced in vfio-pci, it directly manipulatedthe device power state with pci_set_power_state(). There were norefcounts to maintain or balanced operations, we could unconditionallybring the device to D0 and conditionally move it to D3hot. Thereforethe module parameter was made writable.Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters tovfio_pci.c"), as part of the vfio-pci-core split, the writable aspectof the module parameter was nullified. The parameter value could stillbe changed through sysfs, but the vfio-pci driver latched the valuesinto vfio-pci-core globals at module init. Loading the vfio-pci module,or unloading and reloading, with non-default or different values couldchange the globals relative to existing devices bound to vfio-pcivariant drivers.Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move theunused device into low power state with runtime PM"), which marks thepoint where power states became refcounted. PM get and put operationsneed to be balanced, but the same module operations noted above canchange the global variables relative to those devices already bound tovfio-pci variant drivers. This introduces a window where PM operationscan now become unbalanced.To resolve this with a narrow footprint for stable backports, thedisable_idle_d3 flag is latched into the vfio_pci_core_device at thetime of initialization, such that the device always operates with aconsistent value.NB. vfio_pci_dev_set_try_reset() now unconditionally raises theruntime PM usage count around bus reset to account for disable_idle_d3becoming a per-device rather than global flag. When this flag is set,the additional get/put pair is harmless and allows continued use of theshared vfio_pci_dev_set_pm_runtime_get() helper.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()snd_seq_event_dup() copies an incoming event into a pool cell and, inthe UMP-enabled build, clears the trailing cell->ump.raw.extra word thatthe memcpy() did not cover. The guard deciding whether to clear itcompares the copied size against sizeof(cell->event): memcpy(&cell->ump, event, size); if (size < sizeof(cell->event)) cell->ump.raw.extra = 0;For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) ==sizeof(cell->event), so the condition is false and the extra word keepsstale data. The cell pool is allocated with kvmalloc() (not zeroed) andcells are reused via a free list, so that word holds uninitialised heapor leftover event data.When such a cell is delivered to a UMP client (client->midi_version > 0)that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches itunconverted -- snd_seq_read() reads it out as the larger structsnd_seq_ump_event and copies the stale word to user space, a 4-bytekernel heap infoleak to an unprivileged /dev/snd/seq client.Compare against sizeof(cell->ump) instead, so the trailing word is zeroedfor every event shorter than the UMP cell.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: ice1712: check snd_ctl_new1() return valuesnd_ctl_new1() can return NULL when memory allocation fails. Theice1712 driver calls snd_ctl_new1() without checking the return valuebefore dereferencing the pointer in multiple places (ice1712.c,ice1724.c, aureon.c), which can lead to NULL pointer dereferences.Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if anyfails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: firewire: isight: bound the sample count to the packet payloadisight_packet() takes the frame count from the device iso packet andchecks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count);length is the iso header data_length. It can be up to 0xffff. So thegate allows a count up to about 16379. isight_samples() then copiescount frames out of payload->samples into the PCM DMA buffer.payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. Thedevice multiplexes two samples per frame. A count pastMAX_FRAMES_PER_PACKET reads past the payload. A count past the buffersize writes past runtime->dma_area. The smallest PCM buffer is largerthan MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKETkeeps both the read and the write in range.A malicious or faulty Apple iSight on the FireWire bus reaches thisduring a normal capture.Add the MAX_FRAMES_PER_PACKET bound to the gate.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: cmipci: check snd_ctl_new1() return valuesnd_ctl_new1() can return NULL when memory allocation fails.snd_cmipci_spdif_controls() does not check the return value beforedereferencing kctl->id.device, which can lead to a NULL pointerdereference.Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if anyfails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parsersnd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 inputstream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On everyiteration it advances buf and subtracts the block size while looping on"while (len)".len is urb->actual_length. That value is supplied by the device and isnot guaranteed to be a multiple of 16. When a final short block leaveslen between 1 and 15, the loop runs once more, reads up to buf[15], andthen does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflowsto a huge value. The loop then keeps iterating and walking buf far pastthe end of the 512-byte ep4_in_buf, reading out of bounds until a bogusblock id happens to be hit.Iterate only while a full message block is available. This stops theunsigned underflow and silently drops any trailing partial block, whichcarries no complete control value anyway.The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floorurb->actual_length before dispatching.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: ymfpci: check snd_ctl_new1() return valuesnd_ctl_new1() can return NULL when memory allocation fails.snd_ymfpci_create_spdif_controls() does not check the return valuebefore dereferencing kctl->id.device, which can lead to a NULL pointerdereference.Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if anyfails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: pressure: mpl115: fix runtime PM leak on read errormpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()before reading the processed pressure or raw temperature, but on the readerror path it returns without calling pm_runtime_put_autosuspend(). Eachfailed read therefore leaks a runtime PM reference and prevents the devicefrom autosuspending.Drop the reference before checking the return value so both the successand error paths are balanced.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: light: gp2ap002: fix runtime PM leak on read errorgp2ap002_read_raw() calls pm_runtime_get_sync() before reading thelux value, but if gp2ap002_get_lux() fails, it returns directly. Thisskips the pm_runtime_put_autosuspend() call at the "out" label,permanently leaking a runtime PM reference and preventing the devicefrom autosuspending.Replace the direct return with a "goto out" to ensure the referenceis properly dropped on the error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: gyro: bmg160: bail out when bandwidth/filter is not in tablebmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entrymatching the bw_bits value read from the chip: for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) { if (bmg160_samp_freq_table[i].bw_bits == bw_bits) break; } *val = bmg160_samp_freq_table[i].filter;If no entry matches, i ends up equal to the array size and the next linereads one slot past the end. bmg160_set_filter() has the same shape, drivenby 'val' instead of bw_bits.smatch flags both: drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7Return -EINVAL when no entry matches.The set_filter() path is reachable from userspace via the sysfsin_anglvel_filter_low_pass_3db_frequency interface, so userspace cantrivially trigger the out-of-bounds read with a value that is not inbmg160_samp_freq_table[].filter.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: event: Fix event FIFO reset race`iio_event_getfd()` creates the event file descriptor with`anon_inode_getfd()`, which allocates a new fd, creates the anonymousfile and installs it in the process fd table before returning to thecaller.The IIO code resets the event FIFO after `anon_inode_getfd()` has returned,but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace.But since fd tables are shared between threads, another thread can guessthe newly allocated fd number and issue a `read()` on it as soon as the fdhas been installed.This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run inparallel with the `kfifo_reset_out()` in `iio_event_getfd()`.The kfifo documentation says that `kfifo_reset_out()` is only safe when itis called from the reader thread and there is only one concurrent reader.Otherwise it is dangerous and must be handled in the same way as`kfifo_reset()`.If that happens, `kfifo_to_user()` can advance the FIFO `out` index basedon state from before the reset, after the reset has already moved the `out`index to the current `in` index. That can leave the FIFO with an `out`index past the `in` index. A later `read()` can then see an underflowedFIFO length and copy more data than the event FIFO buffer contains. Thiscan result in an out-of-bounds read and leak adjacent kernel memory touserspace.Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd ismarked busy, but the new fd has not been installed yet, so userspace cannotaccess it while the FIFO is reset.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: chemical: scd30: Cleanup initializations and fix sign-extension bugInclude linux/bitfield.h for FIELD_GET().Create new macros for bit manipulation in combination with manual bitmanipulation being replaced with FIELD_GET().The current variable declaration and initializations are barely readableand use comma separations across multiple lines. Refactor theinitializations so that mantissa and exp have separate declarations andsign gets initialized later.In addition (and due to the nature of the cleanup), fix a sign-extensionbug where, float32 would get bitwise anded with ~BIT(31)(which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: adc: lpc32xx: Initialize completion before requesting IRQIn the report from Jaeyoung Chung:"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers itsinterrupt handler with devm_request_irq() before it initializesst->completion with init_completion(). If an interrupt arrives afterdevm_request_irq() and before init_completion(), the handler callscomplete() on an uninitialized completion, causing a kernel panic.The probe path, in lpc32xx_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */lpc32xx_adc_isr() calls complete(): complete(&st->completion);If the device raises an interrupt before init_completion() runs,complete() acquires the uninitialized wait.lock and walks the zeroedtask_list in swake_up_locked(). The zeroed task_list makes list_empty()return false, so swake_up_locked() dereferences a NULL list entry,triggering a KASAN wild-memory-access."Fix the chance of a spurious IRQ causing an uninitialized pointerdereference by moving init_completion() above devm_request_irq().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: accel: kxsd9: fix runtime PM imbalance on write_raw() errorkxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()but returns -EINVAL directly when a scale with a non-zero integer part isrequested, skipping the matching pm_runtime_put_autosuspend(). This leaksa runtime PM usage-counter reference on every such write, after which thedevice can no longer autosuspend.Set the error code and fall through to the existing put instead ofreturning early.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: accel: bmc150: clamp the device-reported FIFO frame count__bmc150_accel_fifo_flush() copies the number of samples the devicereports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. Theframe count is read from the FIFO_STATUS register and only masked to its7 valid bits: count = val & 0x7F;so it can be 0..127. The only other limit applied to it is the optionalcaller-supplied sample budget: if (samples && count > samples) count = samples;which does not constrain count on the flush-all path (samples == 0), andleaves it well above 32 whenever samples is larger. count samples arethen transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so amalfunctioning, malicious or counterfeit accelerometer (or an attackertampering with the I2C/SPI bus) that reports up to 127 frames writes upto 762 bytes into the 192-byte buffer: a stack out-of-bounds write of upto 570 bytes that clobbers the stack canary, saved registers and thereturn address.Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]is sized for, before the transfer, mirroring the watermark clamp alreadydone in bmc150_accel_set_watermark(). A well-formed flush reports at mostBMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: function: rndis: add length check for headerAdd a length check for the rndis header in rndis_rm_hdr, to ensure thatMessageType, MessageLength, DataOffset, and DataLength fields arepresent before they are accessed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/bugs: Enable IBPB flush on BPF JIT allocationEnable hardening against JIT spraying when Spectre-v2 mitigations are inuse. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skipenabling the IBPB flush if the BPF dispatcher is already using a retpolinesequence.This hardening applies only when BPF-JIT is in use. Guard the enablingunder CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Support for hardening against JIT sprayingThe BPF JIT allocator packs many small programs into larger executableallocations and reuses space within those allocations as programs areloaded and freed. When fresh code is written into space that a previousprogram occupied, an indirect jump into the new program can reuse a branchprediction left behind by the old one.Flush the indirect branch predictors before reusing JIT memory so thatindirect jumps into a newly written program don't reuse predictions from anold program that occupied the same space.Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flushstatic call for flushing the branch predictors on JIT memory reuse.Architectures that need a flush, can update it to a predictor flushfunction. By default, its a NOP and does not emit any CALL.Allocations larger than a pack are not covered by this flush. That is safebecause cBPF programs (the unprivileged attack surface) are bounded wellbelow a pack size. Issue a warning if this assumption is ever violatedwhile the flush is active.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ACPI: NFIT: core: Fix possible NULL pointer dereferenceAfter commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler beforegetting NFIT table"), acpi_nfit_probe() installs an ACPI notify handlerfor the NFIT device before checking the presence of the NFIT table. Ifthat table is not there, 0 is returned without allocating the acpi_descobject and setting the driver data pointer of the NFIT device. If theplatform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notificationon the NFIT device at that point, acpi_nfit_uc_error_notify() willdereference a NULL pointer.Prevent that from occurring by adding an acpi_desc check against NULLto acpi_nfit_uc_error_notify().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ACPI: CPPC: Suppress UBSAN warning caused by field misuseThe definition of reg->access_width changes depending on thereg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM usesaccess_width to indicate the PCC region, which can result in a UBSANif the value is greater than 4.For example: UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9 shift exponent 32 is too large for 32-bit type 'int' CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy) Hardware name: To be filled by O.E.M. Call trace: ...(trimming) ubsan_epilogue+0x10/0x48 __ubsan_handle_shift_out_of_bounds+0xdc/0x1e0 cpc_write+0x4d0/0x670 cppc_set_perf+0x18c/0x490 cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq] ... (trimming)Lets fix this by validating the region type, as well as whetheraccess_width has a value. Then since we are returning bit_widthdirectly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correctingthe size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Unconditionally recompute CR8 intercept on PPR updateThe TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exitswhen the guest's virtual TPR falls under the specified threshold,allowing KVM to inject previously masked interrupts.KVM handles these VM exits in handle_tpr_below_threshold().Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")optimized this function by calling apic_update_ppr() instead of raisingKVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there isa pending, deliverable interrupt.However, if there are no new interrupts pending, apic_update_ppr() doesnot issue the request. Thus, kvm_lapic_update_cr8_intercept() andvmx_update_cr8_intercept() are not called before VM entry, which resultsin a high, stale TPR_THRESHOLD. This is problematic due to the followingsentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR.This error condition is typically not observed when KVM runs on a baremetal system because modern processors support APICv, which enablesvirtual-interrupt delivery, and which KVM uses when possible. Thiscauses the processor to no longer generate TPR-below-threshold exitsand to no longer check TPR_THRESHOLD on entry. However, when runningon older platforms, or under nested virtualization on a hypervisor thatdoes not support virtual-interrupt delivery and enforces this check(like Hyper-V) this can cause a VM entry failure with hardware error0x7, as seen in [1].Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does notfind a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up inapic_update_ppr(), as they now become redundant. This ensures that anypath that updates the guest's PPR also figures out if KVM needs to waitfor a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:userfaultfd: gate must_wait writability check on pte_present()userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTEwithout taking the page table lock and then apply pte_write() /huge_pte_write() to it. Those accessors decode bits from the presentencoding only; on a swap or migration entry they read the offset bits thathappen to share the same position and return an undefined result.The intent of the check is "is this fault still WP-blocked?". Anon-marker swap entry means the page is in transit -- the userfaultcontext the original fault delivered against is no longer the same, andthe swap-in or migration completion path will re-deliver a fresh fault ifuserspace still needs to handle it. Worst case under the current code thegarbage write bit says "wait", and the thread stays asleep until aUFFDIO_WAKE that may never arrive.Gate the writability check on pte_present() so the lockless re-check onlyinspects present-PTE bits when the entry is actually present. Thenon-present, non-marker case returns "don't wait" and lets the fault pathretry.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tty: serial: samsung: Remove redundant port lock acquisition in rx helpersSashiko identified a deadlock when the console flow is engaged [1].When console flow control is enabled (UPF_CONS_FLOW),s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() ands3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().The serial core framework invokes the .stop_tx() and .start_tx()callbacks with the port->lock spinlock already held. Furthermore, allinternal driver paths that invoke stop_tx (such as the DMA TXcompletion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQhandler s3c24xx_serial_tx_irq()) also acquire port->lock prior tocalling it. (Note that s3c24xx_serial_start_tx() is only invoked by theserial core).However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable()unconditionally attempt to acquire port->lock again usinguart_port_lock_irqsave(). Since spinlocks are not recursive, thiscauses a deadlock on the same CPU when console flow control is engaged.Remove the redundant lock acquisition from both rx helper functions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: qat - remove unused character device and IOCTLsThe QAT driver exposes a character device (qat_adf_ctl) with IOCTLsfor device configuration, start, stop, status query and enumeration.These IOCTLs are not part of any public uAPI header and have no knownin-tree or out-of-tree users. Device lifecycle is already managed viasysfs.The ioctl interface also increases the attack surface and is thesubject of a number of bug reports.Remove the character device, the IOCTL definitions, and the relateddata structures (adf_dev_status_info, adf_user_cfg_key_val,adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unusedadf_cfg_user.h header and strip adf_ctl_drv.c down to the minimalmodule_init/module_exit hooks for workqueue, AER, and crypto/compressionalgorithm registration.Clean up leftover dead code that was only reachable from the removedIOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),adf_get_vf_real_id() and the unused ADF_CFG macros.Additionally, drop the entry associated to QAT IOCTLs inioctl-number.rst.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}In do_action()'s UpdateRecordDataRoot (fslog.c:3489) andUpdateRecordDataAllocation (fslog.c:3697) cases, the memmovedestination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`,where e->view.data_off comes from an on-disk NTFS_DE insidean INDEX_ROOT or INDEX_BUFFER. Neither case validatesview.data_off + dlen against e->size; the existingcheck_if_index_root / check_if_alloc_index helpers walk theentry chain and validate the entry's offset, but not itsinternal view fields.The neighbouring read sites (e.g., fs/ntfs3/index.c wheniterating view entries) check view.data_off + view.data_size<= e->size. Apply the same bound at the two memmove sites.Reproduced under UML+KASAN on mainline 8d90b09e6741 viapr_warn-only probe instrumentation: with view.data_off forcedto 0xFFFC, the memmove writes 32 bytes past the end of theNTFS_DE.This is similar in shape to Pavitra Jha's 2026-05-02 patch"fs/ntfs3: prevent oob in case UpdateRecordDataRoot"(<20260502105008.21827-1-jhapavitra98@gmail.com>) whichproposes calling ntfs3_bad_de_range(); that helper does notexist in mainline. This patch uses inline checks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: validate lcns_follow in log_replay conversionlog_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRYrecords when replaying version 0 restart tables.During this conversion, the memmove() length is derived directly fromthe on-disk lcns_follow field: memmove(&dp->vcn, &dp0->vcn_low, 2 * sizeof(u64) + le32_to_cpu(dp->lcns_follow) * sizeof(u64));check_rstbl() validates restart table structure, but does not constrainper-entry lcns_follow values relative to the entry size. A malformedfilesystem image can provide an oversized lcns_follow value, causingthe conversion memmove() to access memory beyond the bounds of theallocated restart table buffer.The same field is later used to bound iteration over page_lcns[],so validating lcns_follow during conversion also prevents downstreamout-of-bounds access from the same malformed metadata.Compute the maximum valid lcns_follow from the already-validatedrestart table entry size and reject entries that exceed this bound.Reuse the existing t16/t32 scratch variables already declared inlog_replay() to avoid introducing new declarations.[almaz.alexandrovich@paragon-software.com: fixed the conflicts]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loopThe loop in is_ap_in_tkip() iterates over IEs without verifying thatenough bytes remain before dereferencing the IE header or its payload:- pIE->element_id and pIE->length are read without checking that i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the buffer causes an OOB read.- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12, which requires pIE->length >= 16. For WLAN_EID_RSN it compares pIE->data + 8, requiring pIE->length >= 12. Neither requirement is checked.Add the missing IE header and payload bounds checks and guard eachdata access with an explicit pIE->length minimum, matching thepattern established in update_beacon_info().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) anddereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() hasreleased tb6_lock, so the RA-driven MTU walk can observe a NULL idev andoops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),but this re-fetch is unguarded; nexthop-backed routes surviveaddrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr isnulled.Return 0 when idev is NULL, matching rt6_mtu_change_route() and thefib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref infib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: eir: Fix stack OOB write when prepending the Flags ADeir_create_adv_data() builds the advertising data into a fixed-sizebuffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copiesthe per-instance data without checking that it still fits: memcpy(ptr, adv->adv_data, adv->adv_data_len);tlv_data_max_len() only reserves those 3 bytes when the user-suppliedflags carry a managed-flags bit, so an instance added with flags == 0 isaccepted with adv_data_len up to the full buffer. At advertise time theflags are still prepended, and the memcpy() writes 3 + adv_data_lenbytes into the size-byte buffer: BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301) Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65 Workqueue: hci0 hci_cmd_sync_work __asan_memcpy (mm/kasan/shadow.c:106) eir_create_adv_data (net/bluetooth/eir.c:301) hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310) hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817) hci_cmd_sync_work (net/bluetooth/hci_sync.c:332) This frame has 1 object: [32, 64) 'cp'The "Flags" structure is added by the kernel, not requested byuserspace, so only prepend it when it fits together with the instanceadvertising data; when there is no room for both, drop the flags ratherthan the user-provided data.Reachable by a local user with CAP_NET_ADMIN owning an LE-onlycontroller on the legacy advertising path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/edid: fix OOB read in drm_parse_tiled_block()drm_parse_tiled_block() casts the DisplayID block to astruct displayid_tiled_block and reads the full fixed layout up totile->topology_id[7] without checking block->num_bytes. The DisplayIDiterator only validates the declared payload length, so a crafted EDIDcan advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, orDATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes atthe end of a DisplayID extension. The read then runs past the end of theexact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read.Reject blocks shorter than the spec's 22-byte tiled payload beforereading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()When the scatterlist ring is full or nearly full, bpf_msg_push_data()enters a copy fallback path and computes copy + len for the pageallocation size. Since len comes from BPF with arg3_type = ARG_ANYTHINGand both are u32, a crafted len can wrap the sum to a small value,causing an undersized allocation followed by an out-of-bounds memcpy. BUG: unable to handle page fault for address: ffffed104089a402 Oops: Oops: 0000 [#1] SMP KASAN NOPTI Call Trace: __asan_memcpy (mm/kasan/shadow.c:105) bpf_msg_push_data (net/core/filter.c:2852 net/core/filter.c:2788) bpf_prog_9ed8b5711920a7d7+0x2e/0x36 sk_psock_msg_verdict (net/core/skmsg.c:934) tcp_bpf_sendmsg (net/ipv4/tcp_bpf.c:421 net/ipv4/tcp_bpf.c:584) __sys_sendto (net/socket.c:2206) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)Add an overflow check before the allocation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()bpa10x_setup() sends the vendor command 0xfc0e and passes the responseto bt_dev_info() and hci_set_fw_info() as a "%s" string starting atskb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1);A device that returns a one-byte response (status only) leavesskb->data + 1 past the end of the data, and the %s walk reads adjacentslab memory until it meets a NUL. The same happens when the payload isnot NUL-terminated within skb->len. The out-of-bounds bytes end up inthe kernel log and the firmware-info debugfs file.Print the revision string with a bounded "%.*s" limited to skb->len - 1instead. This keeps the string readable for well-behaved devices whilenever reading past the received data, and does not fail setup, so adevice returning a short or unterminated response keeps working.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: qualcomm: rmnet: validate MAP frame length before ingress parsingWhen ingress deaggregation is disabled, rmnet_map_ingress_handler() passesthe skb straight to __rmnet_map_ingress_handler(), skipping the lengthvalidation that rmnet_map_deaggregate() performs on the aggregated path.The parser then dereferences the MAP header and csum header/trailer based onthe on-wire pkt_len without checking skb->len, so a short frame is read outof bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ...Factor that validation out of rmnet_map_deaggregate() intormnet_map_validate_packet_len() and run it on the no-aggregation path too.The MAP header is bounds-checked first, since this path can receive a frameshorter than the header.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: psample: fix info leak in PSAMPLE_ATTR_DATApsample open codes nla_put() presumably to avoid wipingthe data with 0s just to override it with packet data.This open coding is missing clearing the pad, however,each netlink attr is padded to 4B and data_len maynot be divisible by 4B.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment()br_ip6_fragment() gets prevhdr, a pointer into the skb head, fromip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skbskb_checksum_help() reallocates the head via pskb_expand_head(), leavingprevhdr dangling. It is later dereferenced in ip6_frag_next(), causing ause-after-free write.Save prevhdr's offset before skb_checksum_help() and recompute it after,like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6fragment"). BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857) Write of size 1 at addr ffff888013ff5016 by task exploit/141 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip6_frag_next (net/ipv6/ip6_output.c:857) br_ip6_fragment (net/ipv6/netfilter.c:212) nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407) nf_hook_slow (net/netfilter/core.c:619) br_forward_finish (net/bridge/br_forward.c:66) __br_forward (net/bridge/br_forward.c:115) maybe_deliver (net/bridge/br_forward.c:191) br_flood (net/bridge/br_forward.c:245) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:442) ... packet_sendmsg (net/packet/af_packet.c:3114) ... do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:perf/core: Detach event groups during remove_on_execperf_event_remove_on_exec() removes events by callingperf_event_exit_event(). For top-level events, this removes the event fromthe context with DETACH_EXIT only.This can leave inconsistent group state when a removed event is a groupleader and the group contains siblings without remove_on_exec. If the groupwas active, the surviving siblings can remain active and attached to theremoved leader's sibling list, but are no longer represented by a validgroup leader on the PMU context active lists.A later close of the removed leader uses DETACH_GROUP and can promote thestill-active siblings from this stale group state. The next schedule-in canthen add an already-linked active_list entry again, corrupting the PMUcontext active list.With DEBUG_LIST enabled, this is caught as a list_add double-add inmerge_sched_in().Fix this by detaching group relationships when remove_on_exec removes anevent. This preserves the existing task-exit and revoke behavior, whileensuring surviving siblings are ungrouped before the removed event leavesthe context.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan afterrelease_sock(parent). Once the parent lock is dropped the newlyenqueued child socket sk is reachable via the accept queue, so anothertask can accept and free it before the callback dereferences sk,resulting in a use-after-free.Rework the ->new_connection() op so the core, rather than the callback,owns the child channel's lifetime. The op now receives a pre-allocatednew_chan and returns an errno instead of allocating and returning achannel. l2cap_new_connection() allocates the child channel and linksit into the conn list via __l2cap_chan_add() before invoking thecallback, so the conn-list reference keeps the channel alive oncerelease_sock(parent) exposes the socket to other tasks.Channel configuration that was duplicated in l2cap_sock_init() and thevarious new_connection callbacks is consolidated intol2cap_chan_set_defaults(), which now inherits from the parent channelwhen one is supplied.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: reject free space cache with more entries than pagesWhen loading a v1 free space cache, __load_free_space_cache() takesnum_entries and num_bitmaps straight from the on-diskbtrfs_free_space_header. That header is stored in the tree_root under a keywith type 0, which the tree-checker has no case for, so neither count isvalidated before the load trusts it.The load loops num_entries times and maps the next page whenever the currentone runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), whichdoes io_ctl->pages[io_ctl->index++]. But pages[] is allocated inio_ctl_init() from the cache inode's i_size, not from num_entries: num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE); io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);So if num_entries claims more records than the pages can hold, io_ctl->indexruns off the end of pages[]. The write side never hits this becauseio_ctl_add_entry() and io_ctl_add_bitmap() both stop onceio_ctl->index >= io_ctl->num_pages; the read side just never had the samecheck.To trigger it, take a clean cache (num_entries = here), set num_entriesin the header to 0x10000, and fix up the leaf checksum so it still passesthe tree-checker. The cache inode has i_size = 65536, so num_pages is 16 andpages[] is a 16-pointer (kmalloc-128) array. The load now tries to read65536 entries, io_ctl->index walks up to 16, and pages[16] is read past thearray: BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58 io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) __load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820) load_free_space_cache (fs/btrfs/free-space-cache.c:1017) caching_thread (fs/btrfs/block-group.c:880) btrfs_work_helper (fs/btrfs/async-thread.c:312) process_one_work worker_thread kthread ret_from_forkfree-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()at line 565, which is why that is the frame KASAN names. The out-of-boundsslot is then treated as a struct page and handed to crc32c(), so the badread turns into a GP fault.Add the missing check to io_ctl_check_crc(), which is where both the entryloop and the bitmap loop end up. When num_entries is too large the load nowfails like any corrupt cache: __load_free_space_cache() drops it and rebuildsthe free space from the extent tree, so a valid cache is never rejected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=nOn CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsedattribute table itself instead of calling ip_valid_fib_dump_req(). TheRTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it ispresent, so an RTM_GETROUTE dump for AF_MPLS with strict checking and noRTA_OIF hits a NULL dereference.RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits withoutCAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)Skip unset attributes, as ip_valid_fib_dump_req() does.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsertxfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsertloop needs, so the reinsert (after hlist_del_rcu()) cannot allocate orfail. But its guard is inverted: it skips policies with prefixlen
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: do not trim a device which is not writeable[BUG]There is a bug report that btrfs/242 can randomly fail with thefollowing NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS info (device sdc): allowing degraded mounts BTRFS info (device sdc): turning on async discard BTRFS info (device sdc): enabling free space tree Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000 CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025 pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_trim_fs+0x34c/0xa00 [btrfs] lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs] Call trace: btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P) btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] __arm64_sys_ioctl+0xac/0x108 invoke_syscall.constprop.0+0x5c/0xd0 el0_svc_common.constprop.0+0x40/0xf0 do_el0_svc+0x24/0x40 el0_svc+0x40/0x1d0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00) ---[ end trace 0000000000000000 ]---Also the reporter is very kind to test the following ASSERT() added tobtrfs_trim_free_extents_throttle(): ASSERT(device->bdev, "devid=%llu path=%s dev_state=0x%lx\n", device->devid, btrfs_dev_name(device), device->dev_state);And it shows the following output: assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82)Which means the device->bdev is NULL, and the dev_state isBTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, withoutBTRFS_DEV_STATE_WRITEABLE flag set.[CAUSE]The pc points to the following call chain: btrfs_trim_fs() |- btrfs_trim_free_extents() |- btrfs_trim_free_extents_throttle() |- bdev_max_discard_sectors(device->bdev)So the NULL pointer dereference is caused by device->bdev being NULL.This looks impossible by a quick glance, as just before callingbtrfs_trim_free_extents_throttle(), we have skipped any device that hasBTRFS_DEV_STATE_MISSING flag set.However in this particular case, there is a window where the missingdevice is later re-scanned, causing btrfs to remove theBTRFS_DEV_STATE_MISSING flag: btrfs_control_ioctl() |- btrfs_scan_one_device() |- device_list_add() |- rcu_assign_pointer(device->name, name); | This updates the missing device's path to the new good path. | |- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state) This removes the BTRFS_DEV_STATE_MISSING flag.This allows the missing device to re-appear and clear theBTRFS_DEV_STATE_MISSING flag. However the device still does not havethe BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated.The bdev pointer remains NULL, triggering the crash later.[FIX]This is a big de-synchronization between BTRFS_DEV_STATE_MISSING anddevice->bdev pointer, and shows a gap in btrfs's re-appearing-devicehandling.The proper handling of re-appearing device will need quite some extrawork, which is out of the context of this small---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix double-free in SMB2_close() replayA response-bearing attempt can return a replayable error and free itsresponse buffer. If SMB2_close_init() fails before the next send, cleanupretains the previous buffer type and frees that response again.Reset response bookkeeping before each attempt to prevent the stale free.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb/client: Fix error code in smb2_aead_req_alloc()The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.We would have to do something similar to the previous line where it'scast to int and then long. However, it's simpler to store the return inan int ret variable.This bug would eventually result in a crash when dereference the invaliderror pointer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: amlogic - avoid double cleanup in meson_crypto_probe()When meson_allocate_chanlist() fails after a partial allocation, it alreadyunwinds the allocated chanlist state through its local error path.meson_crypto_probe() then jump to error_flow and callsmeson_free_chanlist() again, causing the same per-flow resources to be torndown twice. In the reproduced failure path, the second teardownre-entered crypto_engine_exit() on an already destroyed worker and KASANreported a slab-use-after-free in kthread_destroy_worker().Prevent double-free by handling partial allocation failures locally withinmeson_allocate_chanlist() and skipping the outer cleanup path.The bug was first flagged by an experimental analysis tool we aredeveloping for kernel memory-management bugs while analyzingv6.13-rc1. The tool is still under development and is not yet publiclyavailable.The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1,using the reproducer under tools/testing/meson_crypto_probe. The reproducerforces the second dma_alloc_attrs() call in the gxl-crypto probe path toreturn NULL, making meson_allocate_chanlist() fail after partialinitialization. On the unpatched kernel this reliably triggered aslab-use-after-free. With this fix applied, the same reproducer no longeremits any KASAN report and the probe fails cleanly with -ENOMEM. ================================================================== BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0 Read of size 8 at addr ff1100010c057a68 by task insmod/265 CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? kthread_destroy_worker+0xb2/0xd0 ? kthread_destroy_worker+0xb2/0xd0 kasan_report+0xca/0x100 ? kthread_destroy_worker+0xb2/0xd0 kthread_destroy_worker+0xb2/0xd0 meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto] platform_probe+0x99/0x140 really_probe+0x1c6/0x6a0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x248/0x310 ? acpi_driver_match_device+0xb0/0x100 driver_probe_device+0x48/0x210 ? __pfx___device_attach_driver+0x10/0x10 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x104/0x190 ? __pfx_bus_for_each_drv+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 __device_attach+0x19d/0x3b0 ? __pfx___device_attach+0x10/0x10 ? do_raw_spin_unlock+0x53/0x220 device_initial_probe+0x78/0xa0 bus_probe_device+0x5b/0x130 device_add+0xcfd/0x1430 ? __pfx_device_add+0x10/0x10 ? insert_resource+0x34/0x50 ? lock_release+0xc9/0x290 platform_device_add+0x24e/0x590 ? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro] meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro] do_one_initcall+0xc0/0x450 ? __pfx_do_one_initcall+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 ? __create_object+0x59/0x80 ? kasan_unpoison+0x27/0x60 do_init_module+0x27b/0x7d0 ? __pfx_do_init_module+0x10/0x10 ? kasan_quarantine_put+0x84/0x1d0 ? kfree+0x32c/0x510 ? load_module+0x561e/0x5ff0 load_module+0x54fe/0x5ff0 ? __pfx_load_module+0x10/0x10 ? security_file_permission+0x20/0x40 ? kernel_read_file+0x23d/0x6e0 ? mmap_region+0x235/0x4a0 ? __pfx_kernel_read_file+0x10/0x10 ? __file_has_perm+0x2c0/0x3e0 init_module_from_file+0x158/0x180 ? __pfx_init_module_from_file+0x10/0x10 ? __lock_acquire+0x45a/0x1ba0 ? idempotent_init_module+0x315/0x610 ? lock_release+0xc9/0x290 ? lock---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: adc: spear: Initialize completion before requesting IRQIn the report from Jaeyoung Chung:"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers itsinterrupt handler with devm_request_irq() before it initializesst->completion with init_completion(). If an interrupt arrives afterdevm_request_irq() and before init_completion(), the handler callscomplete() on an uninitialized completion, causing a kernel panic.The probe path, in spear_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */spear_adc_isr() calls complete(): complete(&st->completion);If the device raises an interrupt before init_completion() runs,complete() acquires the uninitialized wait.lock and walks the zeroedtask_list in swake_up_locked(). The zeroed task_list makes list_empty()return false, so swake_up_locked() dereferences a NULL list entry,triggering a KASAN wild-memory-access."Fix the chance of a spurious IRQ causing an uninitialized pointerdereference by moving init_completion() above devm_request_irq().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest modeWhen updating CR8 intercepts, get vmcs12 if and only if the vCPU is inguest mode so that a future change can have update CR8 intercepts duringvCPU creation, without running afoul of get_vmcs12()'s lockdep assertion. ------------[ cut here ]------------ debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count)) WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879 WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879 Modules linked in: CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline] RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879 Call Trace: apic_update_ppr arch/x86/kvm/lapic.c:984 [inline] kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023 kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986 kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847 kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201 kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f No functional change intended.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in libefiboot, a component of efivar. The device path node parser in libefiboot fails to validate that each node's Length field is at least 4 bytes, which is the minimum size for an EFI (Extensible Firmware Interface) device path node header. A local user could exploit this vulnerability by providing a specially crafted device path node. This can lead to infinite recursion, causing stack exhaustion and a process crash, resulting in a denial of service (DoS).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libefivar1 > 0-0 (version in image is 37-6.12.1).
Description: An integer overflow exists in the FTS5 https://sqlite.org/fts5.html extension. It occurs when the size of an array of tombstone pointers is calculated and truncated into a 32-bit integer. A pointer to partially controlled data can then be written out of bounds.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libsqlite3-0 > 0-0 (version in image is 3.51.3-150000.3.39.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: ctxfi: Fix potential OOB access in audio mixer handlingIn the audio mixer handling code of ctxfi driver, the conf field isused as a kind of loop index, and it's referred in the index callbacks(amixer_index() and sum_index()).As spotted recently by fuzzers, the current code causes OOB access atthose functions.| UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48| index 8 is out of range for type 'unsigned char [8]'After the analysis, the cause was found to be the lack of the proper(re-)initialization of conj field.This patch addresses those OOB accesses by adding the properinitializations of the loop indices.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify()Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent usinguninitialized data.Smatch warns that only 6 bytes are copied to this 8-byte (u64)variable, leaving the last two bytes uninitialized:drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify()warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)Initializing the variable at the start of the function fixes thiswarning and ensures predictable behavior.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools < 2.78.6-150600.4.38.1 (version in image is 2.78.6-150600.4.35.1).
Description: nghttp2's nghttpx proxy through 1.69.0 forwards an HTTP/1.1 Upgrade request that also carries a Content-Length header and body onto reusable keep-alive backend connections, re-adding the Upgrade and Connection headers while passing Content-Length verbatim. A backend that resolves the resulting ambiguous message in the attacker's favor enables HTTP request/response smuggling and cross-client response-queue poisoning.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libnghttp2-14 > 0-0 (version in image is 1.40.0-150600.25.5.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: mask server-provided mode to 07777 in modefromsidWhen modefromsid is active, parse_dacl() applies the server-providedsub_auth[2] value from the NFS mode SID to cf_mode without masking to07777. Apply the correct masking, same as in the read path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()Three IE/attribute parsing functions have missing bounds checks.rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE bufferwithout verifying that the header bytes (tag + length) are within theremaining buffer before reading them. Additionally, rtw_get_sec_ie()compares the 4-byte WPA OUI at cnt+2 without checking that at least6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI atcnt+6 without checking that at least 10 bytes remain.rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally atentry, before verifying that wps_ielen is large enough to containthe 6-byte WPS IE header (element_id + length + 4-byte OUI). Insidethe attribute loop, get_unaligned_be16() is called on attr_ptr andattr_ptr+2 without checking that 4 bytes remain in the buffer.Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimumIE length requirement, add a wps_ielen < 6 early return inrtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: validate STALE_COOKIE cause length before reading stalenessWhen an ERROR chunk with a STALE_COOKIE cause is received in theCOOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measureof Staleness that follows the cause header: err = (struct sctp_errhdr *)(chunk->skb->data); stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err)));err is the first cause in the chunk, not the STALE_COOKIE cause thatcaused the dispatch, and nothing guarantees the staleness field ispresent. sctp_walk_errors() only requires a cause to be as long as the4-byte header, so for a STALE_COOKIE cause of length 4 the read runspast the cause, and for a minimal ERROR chunk past skb->tail. The valueis echoed to the peer in the Cookie Preservative of the reply INIT,leaking uninitialized memory.sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, socheck its length there and pass it to sctp_sf_do_5_2_6_stale(), whichreads that cause instead of the first one. A STALE_COOKIE cause tooshort to hold the staleness field is discarded.The read is reachable by any peer that can drive an association intoCOOKIE_ECHOED, including an unprivileged process using a raw SCTP socketin a user and network namespace.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed. This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send. The fix sets a limit on the amount of excess header frames we will process before closing a connection.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-guest-agent < 20260529.00-150000.1.70.1 (version in image is 20250506.01-150000.1.63.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: When an OAuth2 bearer token is used for an HTTP(S) transfer, and that transferperforms a cross-protocol redirect to a second URL that uses an IMAP, LDAP,POP3 or SMTP scheme, curl might wrongly pass on the bearer token to the newtarget host.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: When doing TLS related transfers with reused easy or multi handles andaltering the `CURLSSLOPT_NO_PARTIALCHAIN` option, libcurl could accidentallyreuse a CA store cached in memory for which the partial chain option wasreversed. Contrary to the user's wishes and expectations. This could makelibcurl find and accept a trust chain that it otherwise would not.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: A flaw was found in GnuTLS. This vulnerability allows a denial of service (DoS) by excessive CPU (Central Processing Unit) and memory consumption via specially crafted malicious certificates containing a large number of name constraints and subject alternative names (SANs).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libgnutls30 > 0-0 (version in image is 3.8.3-150600.4.20.1).
Description: When doing SSH-based transfers using either SCP or SFTP, and setting theknown_hosts file, libcurl could still mistakenly accept connecting to hosts*not present* in the specified file if they were added as recognized in thelibssh *global* known_hosts file.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix race condition validating r_parent before applying stateAdd validation to ensure the cached parent directory inode matches thedirectory info in MDS replies. This prevents client-side race conditionswhere concurrent operations (e.g. rename) cause r_parent to become stalebetween request initiation and reply processing, which could lead toapplying state changes to incorrect directory inodes.[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ]
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - Disallow concurrent writes in af_alg_sendmsgIssuing two writes to the same af_alg socket is bogus as thedata will be interleaved in an unpredictable fashion. Furthermore,concurrent writes may create inconsistencies in the internalsocket state.Disallow this by adding a new ctx->write field that indiciatesexclusive ownership for writing.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: mscc: ocelot: Fix use-after-free caused by cyclic delayed workThe origin code calls cancel_delayed_work() in ocelot_stats_deinit()to cancel the cyclic delayed work item ocelot->stats_work. However,cancel_delayed_work() may fail to cancel the work item if it is alreadyexecuting. While destroy_workqueue() does wait for all pending work itemsin the work queue to complete before destroying the work queue, it cannotprevent the delayed work item from being rescheduled within theocelot_check_stats_work() function. This limitation exists because thedelayed work item is only enqueued into the work queue after its timerexpires. Before the timer expiration, destroy_workqueue() has no visibilityof this pending work item. Once the work queue appears empty,destroy_workqueue() proceeds with destruction. When the timer eventuallyexpires, the delayed work item gets queued again, leading to the followingwarning:workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-statsWARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0...RIP: 0010:__queue_work+0x875/0xaf0...RSP: 0018:ffff88806d108b10 EFLAGS: 00010086RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0Call Trace: ? kasan_report+0xc6/0xf0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? __pfx_delayed_work_timer_fn+0x10/0x10 call_timer_fn+0x25/0x1c0 __run_timer_base.part.0+0x3be/0x8c0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x1c0/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ...The following diagram reveals the cause of the above warning:CPU 0 (remove) | CPU 1 (delayed work callback)mscc_ocelot_remove() | ocelot_deinit() | ocelot_check_stats_work() ocelot_stats_deinit() | cancel_delayed_work()| ... | queue_delayed_work() destroy_workqueue() | (wait a time) | __queue_work() //UAFThe above scenario actually constitutes a UAF vulnerability.The ocelot_stats_deinit() is only invoked when initializationfailure or resource destruction, so we must ensure that anydelayed work items cannot be rescheduled.Replace cancel_delayed_work() with disable_delayed_work_sync()to guarantee proper cancellation of the delayed work item andensure completion of any currently executing work before theworkqueue is deallocated.A deadlock concern was considered: ocelot_stats_deinit() is calledin a process context and is not holding any locks that the delayedwork item might also need. Therefore, the use of the _sync() variantis safe here.This bug was identified through static analysis. To reproduce theissue and validate the fix, I simulated ocelot-swit---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: ensure no dirty metadata is written back for an fs with errors[BUG]During development of a minor feature (make sure all btrfs_bio::end_io()is called in task context), I noticed a crash in generic/388, wheremetadata writes triggered new works after btrfs_stop_all_workers().It turns out that it can even happen without any code modification, justusing RAID5 for metadata and the same workload from generic/388 is goingto trigger the use-after-free.[CAUSE]If btrfs hits an error, the fs is marked as error, no newtransaction is allowed thus metadata is in a frozen state.But there are some metadata modifications before that error, and they arestill in the btree inode page cache.Since there will be no real transaction commit, all those dirty foliosare just kept as is in the page cache, and they can not be invalidatedby invalidate_inode_pages2() call inside close_ctree(), because they aredirty.And finally after btrfs_stop_all_workers(), we call iput() on btreeinode, which triggers writeback of those dirty metadata.And if the fs is using RAID56 metadata, this will trigger RMW and queuenew works into rmw_workers, which is already stopped, causing warningfrom queue_work() and use-after-free.[FIX]Add a special handling for write_one_eb(), that if the fs is already inan error state, immediately mark the bbio as failure, instead of reallysubmitting them.Then during close_ctree(), iput() will just discard all those dirtytree blocks without really writing them back, thus no more new jobs foralready stopped-and-freed workqueues.The extra discard in write_one_eb() also acts as an extra safenet.E.g. the transaction abort is triggered by some extent/free spacetree corruptions, and since extent/free space tree is already corruptedsome tree blocks may be allocated where they shouldn't be (overwritingexisting tree blocks). In that case writing them back will furthercorrupting the fs.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: The html.Parse function in golang.org/x/net/html has quadratic parsing complexity when processing certain inputs, which can lead to denial of service (DoS) if an attacker provides specially crafted HTML content.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: SSH Agent servers do not validate the size of messages when processing new identity requests, which may cause the program to panic if the message is malformed due to an out of bounds read.
Packages affected:
- sle-module-containers-release == 15.6 (version in image is 15.6-150600.37.2).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: xz is a pure golang package for reading and writing xz-compressed files. Prior to version 0.5.14, it is possible to put data in front of an LZMA-encoded byte stream without detecting the situation while reading the header. This can lead to increased memory consumption because the current implementation allocates the full decoding buffer directly after reading the header. The LZMA header doesn't include a magic number or has a checksum to detect such an issue according to the specification. Note that the code recognizes the issue later while reading the stream, but at this time the memory allocation has already been done. This issue has been patched in version 0.5.14.
Packages affected:
- sle-module-public-cloud-release == 15.6 (version in image is 15.6-150600.37.2).
- google-osconfig-agent > 0-0 (version in image is 20250416.02-150000.1.50.1).
Description: SSH servers parsing GSSAPI authentication requests do not validate the number of mechanisms specified in the request, allowing an attacker to cause unbounded memory consumption.
Packages affected:
- sle-module-containers-release == 15.6 (version in image is 15.6-150600.37.2).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.24 and prior to 2.6.0, the number of links in the decompression chain was unbounded allowing a malicious server to insert a virtually unlimited number of compression steps leading to high CPU usage and massive memory allocation for the decompressed data. This vulnerability is fixed in 2.6.0.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- python3-urllib3 > 0-0 (version in image is 1.25.10-150300.4.27.1).
Description: urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.0 and prior to 2.6.0, the Streaming API improperly handles highly compressed data. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. When streaming a compressed response, urllib3 can perform decoding or decompression based on the HTTP Content-Encoding header (e.g., gzip, deflate, br, or zstd). The library must read compressed data from the network and decompress it until the requested chunk size is met. Any resulting decompressed data that exceeds the requested amount is held in an internal buffer for the next read operation. The decompression logic could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This can result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- python3-urllib3 > 0-0 (version in image is 1.25.10-150300.4.27.1).
Description: In the Linux kernel, the following vulnerability has been resolved:e1000: fix OOB in e1000_tbi_should_accept()In e1000_tbi_should_accept() we read the last byte of the frame via'data[length - 1]' to evaluate the TBI workaround. If the descriptor-reported length is zero or larger than the actual RX buffer size, thisread goes out of bounds and can hit unrelated slab objects. The issueis observed from the NAPI receive path (e1000_clean_rx_irq):==================================================================BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790Read of size 1 at addr ffff888014114e54 by task sshd/363CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014Call Trace: dump_stack_lvl+0x5a/0x74 print_address_description+0x7b/0x440 print_report+0x101/0x200 kasan_report+0xc1/0xf0 e1000_tbi_should_accept+0x610/0x790 e1000_clean_rx_irq+0xa8c/0x1110 e1000_clean+0xde2/0x3c10 __napi_poll+0x98/0x380 net_rx_action+0x491/0xa20 __do_softirq+0x2c9/0x61d do_softirq+0xd1/0x120 __local_bh_enable_ip+0xfe/0x130 ip_finish_output2+0x7d5/0xb00 __ip_queue_xmit+0xe24/0x1ab0 __tcp_transmit_skb+0x1bcb/0x3340 tcp_write_xmit+0x175d/0x6bd0 __tcp_push_pending_frames+0x7b/0x280 tcp_sendmsg_locked+0x2e4f/0x32d0 tcp_sendmsg+0x24/0x40 sock_write_iter+0x322/0x430 vfs_write+0x56c/0xa60 ksys_write+0xd1/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xaeRIP: 0033:0x7f511b476b10Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003RBP: 0000559a9383a400 R08: fffffffffffffff0 R09: 0000000000004f00R10: 0000000000000070 R11: 0000000000000246 R12: 0000000000000000R13: 00007ffc9211d57f R14: 0000559a9347bde7 R15: 0000000000000003 Allocated by task 1: __kasan_krealloc+0x131/0x1c0 krealloc+0x90/0xc0 add_sysfs_param+0xcb/0x8a0 kernel_add_sysfs_param+0x81/0xd4 param_sysfs_builtin+0x138/0x1a6 param_sysfs_init+0x57/0x5b do_one_initcall+0x104/0x250 do_initcall_level+0x102/0x132 do_initcalls+0x46/0x74 kernel_init_freeable+0x28f/0x393 kernel_init+0x14/0x1a0 ret_from_fork+0x22/0x30The buggy address belongs to the object at ffff888014114000 which belongs to the cache kmalloc-2k of size 2048The buggy address is located 1620 bytes to the right of 2048-byte region [ffff888014114000, ffff888014114800]The buggy address belongs to the physical page:page:ffffea0000504400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14110head:ffffea0000504400 order:3 compound_mapcount:0 compound_pincount:0flags: 0x100000000010200(slab|head|node=0|zone=1)raw: 0100000000010200 0000000000000000 dead000000000001 ffff888013442000raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000page dumped because: kasan: bad access detected==================================================================This happens because the TBI check unconditionally dereferences the lastbyte without validating the reported length first: u8 last_byte = *(data + length - 1);Fix by rejecting the frame early if the length is zero, or if it exceedsadapter->rx_buffer_len. This preserves the TBI workaround semantics forvalid frames and prevents touching memory beyond the RX buffer.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: j1939: make j1939_session_activate() fail if device is no longer registeredsyzbot is still reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2even after commit 93a27b5891b8 ("can: j1939: add missing calls inNETDEV_UNREGISTER notification handler") was added. A debug printk() patchfound that j1939_session_activate() can succeed even afterj1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)has completed.Since j1939_cancel_active_session() is processed with the session list lockheld, checking ndev->reg_state in j1939_session_activate() with the sessionlist lock held can reliably close the race window.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md: suspend array while updating raid_disks via sysfsIn raid1_reshape(), freeze_array() is called before modifying the r1biomemory pool (conf->r1bio_pool) and conf->raid_disks, andunfreeze_array() is called after the update is completed.However, freeze_array() only waits until nr_sync_pending and(nr_pending - nr_queued) of all buckets reaches zero. When an I/O erroroccurs, nr_queued is increased and the corresponding r1bio is queued toeither retry_list or bio_end_io_list. As a result, freeze_array() mayunblock before these r1bios are released.This can lead to a situation where conf->raid_disks and the mempool havealready been updated while queued r1bios, allocated with the oldraid_disks value, are later released. Consequently, free_r1bio() mayaccess memory out of bounds in put_all_bios() and release r1bios of thewrong size to the new mempool, potentially causing issues with themempool as well.Since only normal I/O might increase nr_queued while an I/O error occurs,suspending the array avoids this issue.Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspendsthe array. Therefore, we suspend the array when updating raid_disksvia sysfs to avoid this issue too.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in the libxml2 library. This uncontrolled resource consumption vulnerability occurs when processing XML catalogs that contain repeated elements pointing to the same downstream catalog. A remote attacker can exploit this by supplying crafted catalogs, causing the parser to redundantly traverse catalog chains. This leads to excessive CPU consumption and degrades application availability, resulting in a denial-of-service condition.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libxml2-2 > 0-0 (version in image is 2.10.3-150500.5.38.1).
Description: Successfully using libcurl to do a transfer to a specific HTTP origin(`hostA`) with **Digest** authentication and then changing the origin to adifferent one (`hostB`) for a second transfer, reusing the same handle, makeslibcurl wrongly pass on the `Authorization:` header field meant for `hostA`,to `hostB`.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: Socket versions before 2.041 for Perl have an out-of-bounds heap read.In Socket.xs, pack_ip_mreq_source() checks the length of its source argument before the argument is read, so the check tests the byte length carried over from the preceding multiaddr argument instead. Both addresses occupy a 4-byte field, so a valid multiaddr lets a source of any length pass the check, and the source is then copied into the 4-byte imr_sourceaddr field with a fixed-size copy. A source shorter than 4 bytes is not rejected, and the copy reads up to 3 bytes past the end of its buffer.Calling pack_ip_mreq_source() with a source value shorter than 4 bytes copies adjacent heap memory into the returned packed structure.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- perl > 0-0 (version in image is 5.26.1-150300.17.20.1).
Description: A denial-of-service and resource exhaustion vulnerability exists within the `GDBus` component of GLib. The `gdbusauth` authentication mechanism fails to enforce proper length limitations on data lines read from a client. An unauthenticated local or remote attacker can exploit this lack of input validation by sending excessively long streams of data, causing the application to consume massive amounts of system memory and CPU, potentially leading to a crash or system hang.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools > 0-0 (version in image is 2.78.6-150600.4.35.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: fix memory leak in skb_segment_list for GRO packetsWhen skb_segment_list() is called during packet forwarding, it handlespackets that were aggregated by the GRO engine.Historically, the segmentation logic in skb_segment_list assumes thatindividual segments are split from a parent SKB and may need to carrytheir own socket memory accounting. Accordingly, the code transferstruesize from the parent to the newly created segments.Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), thistruesize subtraction in skb_segment_list() was valid because fragmentsstill carry a reference to the original socket.However, commit ed4cccef64c1 ("gro: fix ownership transfer") changedthis behavior by ensuring that fraglist entries are explicitlyorphaned (skb->sk = NULL) to prevent illegal orphaning later in thestack. This change meant that the entire socket memory charge remainedwith the head SKB, but the corresponding accounting logic inskb_segment_list() was never updated.As a result, the current code unconditionally adds each fragment'struesize to delta_truesize and subtracts it from the parent SKB. Sincethe fragments are no longer charged to the socket, this subtractionresults in an effective under-count of memory when the head is freed.This causes sk_wmem_alloc to remain non-zero, preventing socketdestruction and leading to a persistent memory leak.The leak can be observed via KMEMLEAK when tearing down the networkingenvironment:unreferenced object 0xffff8881e6eb9100 (size 2048): comm "ping", pid 6720, jiffies 4295492526 backtrace: kmem_cache_alloc_noprof+0x5c6/0x800 sk_prot_alloc+0x5b/0x220 sk_alloc+0x35/0xa00 inet6_create.part.0+0x303/0x10d0 __sock_create+0x248/0x640 __sys_socket+0x11b/0x1d0Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLISTpackets constructed by GRO, the truesize adjustment is removed.The call to skb_release_head_state() must be preserved. As documented incommit cf673ed0e057 ("net: fix fraglist segmentation reference countleak"), it is still required to correctly drop references to SKBextensions that may be overwritten during __copy_skb_header().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Sanitize payload size to prevent member overflowIn qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_sizereported by firmware is used to calculate the copy length intoitem->iocb. However, the iocb member is defined as a fixed-size 64-bytearray within struct purex_item.If the reported frame_size exceeds 64 bytes, subsequent memcpy calls willoverflow the iocb member boundary. While extra memory might be allocated,this cross-member write is unsafe and triggers warnings underCONFIG_FORTIFY_SOURCE.Fix this by capping total_bytes to the size of the iocb member (64 bytes)before allocation and copying. This ensures all copies remain within thebounds of the destination structure member.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: fix use-after-free due to enslave fail after slave array updateFix a use-after-free which happens due to enslave failure after the newslave has been added to the array. Since the new slave can be used for Tximmediately, we can use it after it has been freed by the enslave errorcleanup path which frees the allocated slave memory. Slave update array issupposed to be called last when further enslave failures are not expected.Move it after xdp setup to avoid any problems.It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummyThen run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bus: fsl-mc: fix use-after-free in driver_override_show()The driver_override_show() function reads the driver_override stringwithout holding the device_lock. However, driver_override_store() usesdriver_set_override(), which modifies and frees the string while holdingthe device_lock.This can result in a concurrent use-after-free if the string is freedby the store function while being read by the show function.Fix this by holding the device_lock around the read operation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:atm: lec: fix null-ptr-deref in lec_arp_clear_vccssyzkaller reported a null-ptr-deref in lec_arp_clear_vccs().This issue can be easily reproduced using the syzkaller reproducer.In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared bymultiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).When the underlying VCC is closed, lec_vcc_close() iterates over allARP entries and calls lec_arp_clear_vccs() for each matched entry.For example, when lec_vcc_close() iterates through the hlists inpriv->lec_arp_empty_ones or other ARP tables:1. In the first iteration, for the first matched ARP entry sharing the VCC,lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)and sets vcc->user_back to NULL.2. In the second iteration, for the next matched ARP entry sharing the sameVCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv fromvcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference itvia `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.Fix this by adding a null check for vpriv before dereferencingit. If vpriv is already NULL, it means the VCC has been clearedby a previous call, so we can safely skip the cleanup and justclear the entry's vcc/recv_vcc pointers.The entire cleanup block (including vcc_release_async()) is placed insidethe vpriv guard because a NULL vpriv indicates the VCC has already beenfully released by a prior iteration - repeating the teardown wouldredundantly set flags and trigger callbacks on an already-closing socket.The Fixes tag points to the initial commit because the entry->vcc path hasbeen vulnerable since the original code. The entry->recv_vcc path was lateradded by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")with the same pattern, and both paths are fixed here.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: core: Fix refcount leak for tagset_refcntThis leak will cause a hang when tearing down the SCSI host. For example,iscsid hangs with the following call trace:[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configuredPID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid" #0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4 #1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f #2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0 #3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f #4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b #5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp] #6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi] #7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi] #8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6 #9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS caseIn decode_int(), the CONS case calls get_bits(bs, 2) to read a lengthvalue, then calls get_uint(bs, len) without checking that len bytesremain in the buffer. The existing boundary check only validates the2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint()reads. This allows a malformed H.323/RAS packet to cause a 1-4 byteslab-out-of-bounds read.Add a boundary check for len bytes after get_bits() and beforeget_uint().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp()sip_help_tcp() parses the SIP Content-Length header withsimple_strtoul(), which returns unsigned long, but stores the result inunsigned int clen. On 64-bit systems, values exceeding UINT_MAX aresilently truncated before computing the SIP message boundary.For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32,causing the parser to miscalculate where the current message ends. Theloop then treats trailing data in the TCP segment as a second SIPmessage and processes it through the SDP parser.Fix this by changing clen to unsigned long to match the return type ofsimple_strtoul(), and reject Content-Length values that exceed theremaining TCP payload length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: zlib before 1.3.2 allows CPU consumption via crc32_combine64 and crc32_combine_gen64 because x2nmodp can do right shifts within a loop that has no termination condition.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libz1 > 0-0 (version in image is 1.2.13-150500.4.6.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: use generic driver_override infrastructureWhen a driver is probed through __driver_attach(), the bus' match()callback is called without the device lock held, thus accessing thedriver_override field without a lock, which can cause a UAF.Fix this by using the driver-core driver_override infrastructure takingcare of proper locking internally.Note that calling match() from __driver_attach() without the device lockheld is intentional. [1]Also note that we do not enable the driver_override feature of structbus_type, as SPI - in contrast to most other buses - passes "" tosysfs_emit() when the driver_override pointer is NULL. Thus, printing"\n" instead of "(null)\n".
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timerand id_addr_timer while holding conn->lock. However, the work functionsl2cap_info_timeout() and l2cap_conn_update_id_addr() both acquireconn->lock, creating a potential AB-BA deadlock if the work is alreadyexecuting when l2cap_conn_del() takes the lock.Move the work cancellations before acquiring conn->lock and usedisable_delayed_work_sync() to additionally prevent the works frombeing rearmed after cancellation, consistent with the pattern used inhci_conn_del().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: caiaq: take a reference on the USB device in create_card()The caiaq driver stores a pointer to the parent USB device incdev->chip.dev but never takes a reference on it. The card'sprivate_free callback, snd_usb_caiaq_card_free(), can runasynchronously via snd_card_free_when_closed() after the USBdevice has already been disconnected and freed, so any access tocdev->chip.dev in that path dereferences a freed usb_device.On top of the refcounting issue, the current card_free implementationcalls usb_reset_device(cdev->chip.dev). A reset in a free callbackis inappropriate: the device is going away, the call takes thedevice lock in a teardown context, and the reset races with thedisconnect path that the callback is already cleaning up after.Take a reference on the USB device in create_card() withusb_get_dev(), drop it with usb_put_dev() in the free callback,and remove the usb_reset_device() call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:writeback: Fix use after free in inode_switch_wbs_work_fn()inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... }Now adding of items to the list looks like:wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work);Because inode_switch_wbs_work_fn() loops when processing isw items, itcan happen that wb->switch_work is pending while wb->switch_wbs_ctxs isempty. This is a problem because in that case wb can get freed (no iswitems -> no wb reference) while the work is still pending causinguse-after-free issues.We cannot just fix this by cancelling work when freeing wb because thatcould still trigger problematic 0 -> 1 transitions on wb refcount due towb_get() in inode_switch_wbs_work_fn(). It could be all handled withmore careful code but that seems unnecessarily complex so let's avoidthat until it is proven that the looping actually brings practicalbenefit. Just remove the loop from inode_switch_wbs_work_fn() instead.That way when wb_queue_isw() queues work, we are guaranteed we haveadded the first item to wb->switch_wbs_ctxs and nobody is going toremove it (and drop the wb reference it holds) until the queued workruns.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_hid: move list and spinlock inits from bind to allocThere was an issue when you did the following:- setup and bind an hid gadget- open /dev/hidg0- use the resulting fd in EPOLL_CTL_ADD- unbind the UDC- bind the UDC- use the fd in EPOLL_CTL_DELWhen CONFIG_DEBUG_LIST was enabled, a list_del corruption was reportedwithin remove_wait_queue (via ep_remove_wait_queue). After somedebugging I found out that the queues, which f_hid registers viapoll_wait were the problem. These were initialized usinginit_waitqueue_head inside hidg_bind. So effectively, the bind functionre-initialized the queues while there were still items in them.The solution is to move the initialization from hidg_bind to hidg_allocto extend their lifetimes to the lifetime of the function instance.Additionally, I found many other possibly problematic init calls in thebind function, which I moved as well.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: jq is a command-line JSON processor. Commits before 6374ae0bcdfe33a18eb0ae6db28493b1f34a0a5b contain a vulnerability where CLI input parsing allows validation bypass via embedded NUL bytes. When reading JSON from files or stdin, jq uses strlen() to determine buffer length instead of the actual byte count from fgets(), causing it to truncate input at the first NUL byte and parse only the preceding prefix. This enables an attacker to craft input with a benign JSON prefix before a NUL byte followed by malicious trailing data, where jq validates only the prefix as valid JSON while silently discarding the suffix. Workflows relying on jq to validate untrusted JSON before forwarding it to downstream consumers are susceptible to parser differential attacks, as those consumers may process the full input including the malicious trailing bytes. This issue has been patched by commit 6374ae0bcdfe33a18eb0ae6db28493b1f34a0a5b.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: BIND resolvers are vulnerable to an amplified resource consumption/exhaustion attack. If a victim resolver makes a query to a specially crafted zone, the resolver will consume disproportionate resources.This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.49-150600.3.26.1 (version in image is 9.18.33-150600.3.21.1).
Description: A weakness has been identified in libssh up to 0.11.3. The impacted element is the function sftp_extensions_get_name/sftp_extensions_get_data of the file src/sftp.c of the component SFTP Extension Name Handler. Executing a manipulation of the argument idx can lead to out-of-bounds read. The attack may be performed from remote. Upgrading to version 0.11.4 and 0.12.0 is sufficient to resolve this issue. This patch is called 855a0853ad3abd4a6cd85ce06fce6d8d4c7a0b60. You should upgrade the affected component.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config > 0-0 (version in image is 0.9.8-150600.11.12.1).
Description: OpenTelemetry-Go is the Go implementation of OpenTelemetry. Prior to 1.43.0, the otlp HTTP exporters (traces/metrics/logs) read the full HTTP response body into an in-memory bytes.Buffer without a size cap. This is exploitable for memory exhaustion when the configured collector endpoint is attacker-controlled (or a network attacker can mitm the exporter connection). This vulnerability is fixed in 1.43.0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: Net::IMAP implements Internet Message Access Protocol (IMAP) client functionality in Ruby. Prior to versions 0.4.24, 0.5.14, and 0.6.4, symbol arguments to commands are vulnerable to a CRLF Injection / IMAP Command injection via Symbol arguments passed to IMAP commands. This issue has been patched in versions 0.4.24, 0.5.14, and 0.6.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libruby2_5-2_5 > 0-0 (version in image is 2.5.9-150000.4.54.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix zero size inode with non-zero size after log replayWhen logging that an inode exists, as part of logging a new name orlogging new dir entries for a directory, we always set the generation ofthe logged inode item to 0. This is to signal during log replay (inoverwrite_item()), that we should not set the i_size since we only loggedthat an inode exists, so the i_size of the inode in the subvolume treemust be preserved (as when we log new names or that an inode exists, wedon't log extents).This works fine except when we have already logged an inode in full modeor it's the first time we are logging an inode created in a pasttransaction, that inode has a new i_size of 0 and then we log a new namefor the inode (due to a new hardlink or a rename), in which case we logan i_size of 0 for the inode and a generation of 0, which causes the logreplay code to not update the inode's i_size to 0 (in overwrite_item()).An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir
After log replay the file remains with a size of 64K. This is because whenwe first log the inode, when we fsync file foo, we log its current i_sizeof 0, and then when we create a hard link we log again the inode in existsmode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item weadd to the log tree, so during log replay overwrite_item() sees that thegeneration is 0 and i_size is 0 so we skip updating the inode's i_sizefrom 64K to 0.Fix this by making sure at fill_inode_item() we always log the realgeneration of the inode if it was logged in the current transaction withthe i_size we logged before. Also if an inode created in a previoustransaction is logged in exists mode only, make sure we log the i_sizestored in the inode item located from the commit root, so that if we logmultiple times that the inode exists we get the correct i_size.A test case for fstests will follow soon.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:md-cluster: fix NULL pointer dereference in process_metadata_updateThe function process_metadata_update() blindly dereferences the 'thread'pointer (acquired via rcu_dereference_protected) within the wait_event()macro.While the code comment states "daemon thread must exist", there is a validrace condition window during the MD array startup sequence (md_run):1. bitmap_load() is called, which invokes md_cluster_ops->join().2. join() starts the "cluster_recv" thread (recv_daemon).3. At this point, recv_daemon is active and processing messages.4. However, mddev->thread (the main MD thread) is not initialized until later in md_run().If a METADATA_UPDATED message is received from a remote node during thisspecific window, process_metadata_update() will be called whilemddev->thread is still NULL, leading to a kernel panic.To fix this, we must validate the 'thread' pointer. If it is NULL, werelease the held lock (no_new_dev_lockres) and return early, safelyignoring the update request as the array is not yet fully ready toprocess it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: iwlwifi: mvm: don't send a 6E related command when not supportedMCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if thedevice doesn't support 6E.Apparently, the firmware is mistakenly advertising support for thiscommand even on AX201 which does not support 6E and then the firmwarecrashes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: yurex: fix race in probeThe bbu member of the descriptor must be set to the valuestanding for uninitialized values before the URB whosecompletion handler sets bbu is submitted. Otherwise there isa window during which probing can overwrite already retrieveddata.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Internationalized Domain Names in Applications (IDNA) for Python provides support for Internationalized Domain Names in Applications (IDNA) and Unicode IDNA Compatibility Processing. In versions prior to 3.15, payloads such as `"\u0660" * N` or `"\u30fb" * N + "\u6f22"` utilize the `valid_contexto` function prior to length rejection, and for high values of `N` will take a long time to process. This is the same issue as CVE-2024-3651, however the original remediation in 2024 was not a complete fix. A specially crafted argument to the `idna.encode()` function could consume significant resources. This may lead to a denial-of-service. Starting in version 3.14, the function rejects long inputs as soon as practicable prior to any further processing to minimize resource consumption. In version 3.15, this approach was extended to lesser used alternate functions (i.e. per-label conversions and codec support). A workaround is available. Domain names cannot exceed 253 characters in length. If this length limit is enforced prior to passing the domain to the `idna.encode()` function, it should no longer consume significant resources. This is triggered by arbitrarily large inputs that would not occur in normal usage, but may be passed to the library assuming there is no preliminary input validation by the higher-level application.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3-idna > 0-0 (version in image is 2.6-150000.3.6.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipvs: skip ipv6 extension headers for csum checksProtocol checksum validation fails for IPv6 if there are extensionheaders before the protocol header. iph->len already contains itsoffset, so use it to fix the problem.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conncount: increase the connection clean up limit to 64After the optimization to only perform one GC per jiffy, a new problemwas introduced. If more than 8 new connections are tracked per jiffy thelist won't be cleaned up fast enough possibly reaching the limitwrongly.In order to prevent this issue, only skip the GC if it was alreadytriggered during the same jiffy and the increment is lower than theclean up limit. In addition, increase the clean up limit to 64connections to avoid triggering GC too often and do more effective GCs.This has been tested using a HTTP server and severalperformance tools while having nft_connlimit/xt_connlimit or OVS limitconfigured.Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/hns: Fix unlocked call to hns_roce_qp_remove()Sashiko points out that hns_roce_qp_remove() requires the caller to holdlocks. The error flow in hns_roce_create_qp_common() doesn't hold thoselocks for the error unwind so it risks corrupting memory.Grab the same locks the other two callers use.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:8021q: delete cleared egress QoS mappingsvlan_dev_set_egress_priority() currently keeps cleared egresspriority mappings in the hash as tombstones. Repeated set/clear cycleswith distinct skb priorities therefore accumulate mapping nodes untildevice teardown and leak memory.Delete mappings when vlan_prio is cleared instead of keeping tombstones.Now that the egress mapping lists are RCU protected, the node can beunlinked safely and freed after a grace period.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: pcm: oss: Fix data race at accessing runtime.oss.triggerCurrently the runtime.oss.trigger field may be accessed concurrentlywithout protection, which may lead to the data race. And, in thiscase, it may lead to more severe problem because it's a bit field; aswriting the data, it may overwrite other bit fields as well, whichconfuses the operation completely, as spotted by fuzzing.Fix it by covering runtime.oss.trigger bit fled also with the existingparams_lock mutex in both snd_pcm_oss_get_trigger() andsnd_pcm_oss_poll().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: diag: reject stale associations in dump_one pathThe SCTP exact sock_diag lookup can hold a transport reference, block onlock_sock(sk), and then resume after sctp_association_free() has markedthe association dead and freed its bind address list.When that happens, inet_assoc_attr_size() andinet_diag_msg_sctpasoc_fill() can still dereference association statethat is no longer valid for reporting. In particular,inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as areal sctp_sockaddr_entry and trigger an out-of-bounds read fromunrelated association memory.Reject the association after taking the socket lock if it has beenreaped or detached from the endpoint, and report the lookup as stale.This keeps the exact dump-one path from formatting torn associationstate.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm cache policy smq: fix missing locks in invalidating cache blocksIn passthrough mode, the policy invalidate_mapping operation is calledsimultaneously from multiple workers, thus it should be protected by alock. Otherwise, we might end up with data races on the allocated blockscounter, or even use-after-free issues with internal data structureswhen doing concurrent writes.Note that the existing FIXME in smq_invalidate_mapping() doesn't affectpassthrough mode since migration tasks don't exist there, but would needattention if supporting fast device shrinking via suspend/resume withouttarget reloading.Reproduce steps:1. Create a cache device consisting of 1024 cache entriesdmsetup create cmeta --table "0 8192 linear /dev/sdc 0"dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"dmsetup create corig --table "0 262144 linear /dev/sdc 262144"dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=directdmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"2. Populate the cache, and record the number of cached blocksfio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \--size=64m --direct=1nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}')3. Reload the cache into passthrough modedmsetup suspend cachedmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"dmsetup resume cache4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers.fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \--direct=1 --numjobs=2 --randrepeat=0 --size=64m5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race.nr_demoted=$(dmsetup status cache | awk '{print $12}')echo "$nr_cached, $nr_demoted"
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bus: fsl-mc: use generic driver_override infrastructureWhen a driver is probed through __driver_attach(), the bus' match()callback is called without the device lock held, thus accessing thedriver_override field without a lock, which can cause a UAF.Fix this by using the driver-core driver_override infrastructure takingcare of proper locking internally.Note that calling match() from __driver_attach() without the device lockheld is intentional. [1]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/ap: use generic driver_override infrastructureWhen the AP masks are updated via apmask_store() or aqmask_store(),ap_bus_revise_bindings() is called after ap_attr_mutex has beenreleased.This calls __ap_revise_reserved(), which accesses the driver_overridefield without holding any lock, racing against a concurrentdriver_override_store() that may free the old string, resulting in apotential UAF.Fix this by using the driver-core driver_override infrastructure, whichprotects all accesses with an internal spinlock.Note that unlike most other buses, the AP bus does not checkdriver_override in its match() callback; the override is checked inap_device_probe() and __ap_revise_reserved() instead.Also note that we do not enable the driver_override feature of structbus_type, as AP - in contrast to most other buses - passes "" tosysfs_emit() when the driver_override pointer is NULL. Thus, printing"\n" instead of "(null)\n".Additionally, AP has a custom counter that is modified in thecorresponding custom driver_override_store().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/cio: use generic driver_override infrastructureWhen a driver is probed through __driver_attach(), the bus' match()callback is called without the device lock held, thus accessing thedriver_override field without a lock, which can cause a UAF.Fix this by using the driver-core driver_override infrastructure takingcare of proper locking internally.Note that calling match() from __driver_attach() without the device lockheld is intentional. [1]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparisonThe local-vs-remote region comparison loop uses '<=' instead of '<',causing it to read one entry past the valid range of qr_regions. Theother loops in the same function correctly use '<'.Fix the loop condition to use '<' for consistency and correctness.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.2 and newer fail to enforce the caller-supplied buffer length, and can result in an out-of-bounds write when printing TSIG records.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glibc < 2.38-150600.14.52.1 (version in image is 2.38-150600.14.49.1).
Description: An out-of-bounds read flaw was found in Samba's Kerberos Key Distribution Center's (KDC) password change (kpasswd) service. When processing malformed ASN.1-encoded Kerberos password change request, Samba server miscalculates the structure size and attempts to read up to six bytes beyond the end of the allocated buffer. While this out-of-bounds read typically results in a harmless decryption failure, if the read hits unmapped memory, it causes the KDC process to crash. An authenticated attacker can send a specially crafted kpasswd request containing malformed ASN.1 data to trigger the out-of-bounds read, which may cause the KDC process to terminate, resulting in a denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- samba-client-libs < 4.19.8+git.501.67274891bc-150600.3.29.1 (version in image is 4.19.8+git.473.51d12fd320c-150600.3.26.1).
Description: A flaw was found in Samba's internal DNS server where unauthenticated TKEY registration requests were added to the TKEY name cache before being rejected. A remote, unauthenticated attacker can exploit this behavior by sending a large number of TKEY requests with arbitrary names, exhausting the cache and evicting legitimate TKEY entries. This can prevent legitimate TSIG authentication for signed DNS queries, resulting in a denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- samba-client-libs < 4.19.8+git.501.67274891bc-150600.3.29.1 (version in image is 4.19.8+git.473.51d12fd320c-150600.3.26.1).
Description: GNU Wget through 1.25.0, fixed in commit 43d3ba9, contains an integer overflow vulnerability in the parse_content_range() function within src/http.c that allows server-controlled values to cause signed integer arithmetic to overflow. Attackers can supply malicious Content-Range header values to trigger undefined behavior and download desynchronization in the affected client.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- wget > 0-0 (version in image is 1.20.3-150600.19.12.1).
Description: An unbounded resend loop vulnerability exists in the BIND 9 resolver state machine during bad-server handling, enabling a remote unauthenticated attacker to cause severe resource exhaustion by sending queries that trigger specific retry conditions.This issue affects BIND 9 versions 9.18.36 through 9.18.48, 9.20.8 through 9.20.22, 9.21.7 through 9.21.21, 9.18.36-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- bind-utils < 9.18.49-150600.3.26.1 (version in image is 9.18.33-150600.3.21.1).
Description: The deprecated functions ns_printrrf, ns_printrr and fp_nquery in the GNU C Library version 2.0.1 to version 2.43 fail to validate the RDATA content against the RDATA length in a DNS response when processing A6, CERT, LOC, TKEY or TSIG records, which may allow an attacker to craft a DNS response, causing a target application to crash or read uninitialized memory.These functions are for application debugging only and hence not in the path of code executed by the DNS resolver. Further, they have been deprecated since version 2.34 and should not be used by any new applications. Applications should consider porting away from these interfaces since they may be removed in future versions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glibc < 2.38-150600.14.52.1 (version in image is 2.38-150600.14.49.1).
Description: In the Linux kernel, the following vulnerability has been resolved:macsec: fix replay protection at XPN lower-PN wrapIn macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0and the first branch never fires. If next_pn_halves.lower is also in theupper half, pn_same_half(pn, lower) is true and the XPN else-if does notfire either, leaving next_pn_halves unchanged. An attacker that capturesthe legitimate frame carrying pn == 0xFFFFFFFF on an XPN associationcan then replay it indefinitely, since lowest_pn never rises abovethe captured pn and macsec_decrypt() reconstructs the same IV.Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receiptof pn == U32_MAX advances next_pn_halves to (upper + 1, 0).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: bla: avoid double decrement of bla.num_requestsThe bla.num_requests is increased when no request_sent was in progress. Andit is decremented in various places (announcement was received, backbone ispurged, periodic work). But the check if the request_sent is actually setto a specific state and the atomic_dec/_inc are not safe because they arenot atomic (TOCTOU) and multiple such code portions can run concurrently.At the same time, it is necessary to modify request_sent (state) andbla.num_requests atomically. Otherwise batadv_bla_send_request() might setrequest_sent to 1 and is interrupted. batadv_handle_announce() can thenset request_sent back to 0 and decrement num_requests beforebatadv_bla_send_request() incremented it.The two operations must therefore be locked. And since state (request_sent)and wait_periods are only accessed inside this lock, they can be convertedto simpler datatypes. And to avoid that the bla.num_requests is touched bya parallel running context with a valid backbone_gw reference afterbatadv_bla_purge_backbone_gw() ran, a third state "stopped" is required tocorrectly signal that a backbone_gw is in the state of being cleaned up.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ixgbevf: fix use-after-free in VEPA multicast source pruningixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF'sown address (VEPA multicast workaround) by freeing the skb andcontinuing to the next descriptor: dev_kfree_skb_irq(skb); continue;The skb pointer is declared outside the while loop and persists acrossiterations. Because the continue skips the "skb = NULL" reset at thebottom of the loop, the next iteration enters the "else if (skb)" pathand calls ixgbevf_add_rx_frag() on the freed skb, dereferencingskb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.The sibling driver iavf already handles this correctly by nulling thepointer before continuing. Apply the same pattern here.I do not have ixgbevf hardware; the bug was found by static analysis(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-toolcorroboration with the highest score in the scan). The UAF was confirmedunder KASAN by loading a test module that reproduces the exact codepattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90)QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VFdriver does not include the VEPA source pruning path, so a fullend-to-end reproduction with emulated hardware was not possible.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: flowtable: IPIP tunnel hardware offload is not yet supportNo driver supports for IPIP tunnels yet, give up early on setting up thehardware offload for this scenario.This patch adds a stub that can be enhanced to add more configurationthat are currently not supported. As of now, the offload work isenqueued to the worker, then ignored if the hardware offloadconfiguration is not supported.Check the NF_FLOW_HW flag to know if this entry was already tried onceto be offloaded so this is not retried on refresh when unsupported. MoveNF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flagis unset the _del and _stats variants are never called.This can be updated later on to skip hardware offload work to be queuedin case hardware offload does not support it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: The ftpcp() function in Lib/ftplib.py was not updated when CVE-2021-4189 was fixed. While makepasv() was patched to replace server-supplied PASV host addresses with the actual peer address (getpeername()[0]), ftpcp() still calls parse227() directly and passes the raw attacker-controllable IP address and port to target.sendport(). This patch is related to CVE-2021-4189.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: When reusing a libcurl handle for sequential transfers driven byenvironment-variable proxy configuration, libcurl fails to clear the proxyauthentication state between requests. Specifically, if the initial transferauthenticates against `proxyA` using Digest auth, a subsequent transfer routedthrough `proxyB` erroneously leaks the `Proxy-Authorization:` header intendedsolely for `proxyA`.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/proc: fix uaf in proc_readdir_de()Pde is erased from subdir rbtree through rb_erase(), but not set the nodeto EMPTY, which may result in uaf access. We should use RB_CLEAR_NODE()set the erased node to EMPTY, then pde_subdir_next() will return NULL toavoid uaf access.We found an uaf issue while using stress-ng testing, need to run testcasegetdent and tun in the same time. The steps of the issue is as follows:1) use getdent to traverse dir /proc/pid/net/dev_snmp6/, and current pde is tun3;2) in the [time windows] unregister netdevice tun3 and tun2, and erase them from rbtree. erase tun3 first, and then erase tun2. the pde(tun2) will be released to slab;3) continue to getdent process, then pde_subdir_next() will return pde(tun2) which is released, it will case uaf access.CPU 0 | CPU 1-------------------------------------------------------------------------traverse dir /proc/pid/net/dev_snmp6/ | unregister_netdevice(tun->dev) //tun3 tun2sys_getdents64() | iterate_dir() | proc_readdir() | proc_readdir_de() | snmp6_unregister_dev() pde_get(de); | proc_remove() read_unlock(&proc_subdir_lock); | remove_proc_subtree() | write_lock(&proc_subdir_lock); [time window] | rb_erase(&root->subdir_node, &parent->subdir); | write_unlock(&proc_subdir_lock); read_lock(&proc_subdir_lock); | next = pde_subdir_next(de); | pde_put(de); | de = next; //UAF |rbtree of dev_snmp6 | pde(tun3) / \ NULL pde(tun2)
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: Intel: avs: Do not share the name pointer between componentsBy sharing 'name' directly, tearing down components may lead touse-after-free errors. Duplicate the name to avoid that.At the same time, update the order of operations - since commitcee28113db17 ("ASoC: dmaengine_pcm: Allow passing component name viaconfig") the framework does not override component->name if set beforeinvoking the initializer.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: Limit XDomain response copy to actual frame sizetb_xdomain_copy() copies req->response_size bytes from the receivedpacket buffer regardless of the actual frame size. When a shortresponse arrives, this reads past the valid frame data in the DMApool buffer into stale contents from previous transactions.Use the minimum of frame size and expected response size for thecopy length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: usbtmc: check URB actual_length for interrupt-IN notificationsUSBTMC devices can use an optional interrupt endpoint for notificationmessages. These typically contain two-byte headers indicating thepayload format, but the driver does not check if these headers arepresent before accessing the data buffers. In cases where the URBactual_length is not enough to fit these headers, the driver will eithercause an out-of-bounds read, or consume stale leftover data from aprevious notification.Fix by checking if actual_data contains enough bytes for the headers,otherwise resubmit URB to the interrupt endpoint.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A cross-privilege Spectre v2 vulnerability allows attackers to bypass all deployed mitigations, including the recent Fine(IBT), and to leak arbitrary Linux kernel memory on Intel systems.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bna: ensure the copied buf is NUL terminatedCurrently, we allocate a nbytes-sized kernel buffer and copy nbytes fromuserspace to that buffer. Later, we use sscanf on this buffer but we don'tensure that the string is terminated inside the buffer, this can lead toOOB read when using sscanf. Fix this issue by using memdup_user_nulinstead of memdup_user.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ice: ensure the copied buf is NUL terminatedCurrently, we allocate a count-sized kernel buffer and copy count bytesfrom userspace to that buffer. Later, we use sscanf on this buffer but wedon't ensure that the string is terminated inside the buffer, this can leadto OOB read when using sscanf. Fix this issue by using memdup_user_nulinstead of memdup_user.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ice: fix devlink reload call traceCommit 4da71a77fc3b ("ice: read internal temperature sensor") introducedinternal temperature sensor reading via HWMON. ice_hwmon_init() was addedto ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As aresult if devlink reload is used to reinit the device and then the driveris removed, a call trace can occur.BUG: unable to handle page fault for address: ffffffffc0fd4b5dCall Trace: string+0x48/0xe0 vsnprintf+0x1f9/0x650 sprintf+0x62/0x80 name_show+0x1f/0x30 dev_attr_show+0x19/0x60The call trace repeats approximately every 10 minutes when systemmonitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfsattributes that reference freed module memory.The sequence is:1. Driver load, ice_hwmon_init() gets called from ice_init_feature()2. Devlink reload down, flow does not call ice_remove()3. Devlink reload up, ice_hwmon_init() gets called from ice_init_feature() resulting in a second instance4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the first hwmon instance orphaned with dangling pointerFix this by moving ice_hwmon_exit() from ice_remove() toice_deinit_features() to ensure proper cleanup symmetry withice_hwmon_init().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of datainto `ihid->rawbuf`.The former can come from the userspace in the hidraw driver and is onlybounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set`max_buffer_size` field of `struct hid_ll_driver` which we do not).The latter has size determined at runtime by the maximum size ofdifferent report types you could receive on any particular device andcan be a much smaller value.Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.The impact is low since access to hidraw devices requires root.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.0.9 to before 1.6.57, passing a pointer obtained from png_get_PLTE, png_get_tRNS, or png_get_hIST back into the corresponding setter on the same png_struct/png_info pair causes the setter to read from freed memory and copy its contents into the replacement buffer. The setter frees the internal buffer before copying from the caller-supplied pointer, which now dangles. The freed region may contain stale data (producing silently corrupted chunk metadata) or data from subsequent heap allocations (leaking unrelated heap contents into the chunk struct). This vulnerability is fixed in 1.6.57.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: Buffer overflow vulnerability has been found in "extension/readdir.c" program file of gawk (ftype() routine). This issue could be used to crash the program and potentially to achieve code execution, although the latter has not been confirmed to be feasible. It affects gawk in versions 5.4.0 and below.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- gawk > 0-0 (version in image is 4.2.1-150000.3.3.1).
Description: In the Linux kernel, the following vulnerability has been resolved:futex: Prevent lockup in requeue-PI during signal/ timeout wakeupDuring wait-requeue-pi (task A) and requeue-PI (task B) the followingrace can happen: Task A Task B futex_wait_requeue_pi() futex_setup_timer() futex_do_wait() futex_requeue() CLASS(hb, hb1)(&key1); CLASS(hb, hb2)(&key2); *timeout* futex_requeue_pi_wakeup_sync() requeue_state = Q_REQUEUE_PI_IGNORE *blocks on hb->lock* futex_proxy_trylock_atomic() futex_requeue_pi_prepare() Q_REQUEUE_PI_IGNORE => -EAGAIN double_unlock_hb(hb1, hb2) *retry*Task B acquires both hb locks and attempts to acquire the PI-lock of thetop most waiter (task B). Task A is leaving early due to a signal/timeout and started removing itself from the queue. It updates itsrequeue_state but can not remove it from the list because this requiresthe hb lock which is owned by task B.Usually task A is able to swoop the lock after task B unlocked it.However if task B is of higher priority then task A may not be able towake up in time and acquire the lock before task B gets it again.Especially on a UP system where A is never scheduled.As a result task A blocks on the lock and task B busy loops, trying tomake progress but live locks the system instead. Tragic.This can be fixed by removing the top most waiter from the list in thiscase. This allows task B to grab the next top waiter (if any) in thenext iteration and make progress.Remove the top most waiter if futex_requeue_pi_prepare() fails.Let the waiter conditionally remove itself from the list inhandle_early_requeue_pi_wakeup().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skbbpf_prog_test_run_skb() calls eth_type_trans() first and then usesskb->protocol to initialize sk family and address fields for the testrun.For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)even when the provided test input only contains an Ethernet header.Reject the input earlier if the Ethernet frame carries IPv4/IPv6EtherType but the L3 header is too short.Fold the IPv4/IPv6 header length checks into the existing protocolswitch and return -EINVAL before accessing the network headers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap initRegmap initialization triggers regcache_maple_populate() which attemptsSPI read to populate cache. SPI read requires mcp->dev and mcp->addr tobe set, without them, NULL pointer dereference occurs during probe.Move initialization before mcp23s08_spi_regmap_init() call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:serial: dz: Convert to use a platform devicePrevent a crash from happening as the first serial port is initialised: Console: switching to colour frame buffer device 160x64 tgafb: SFB+ detected, rev=0x02 fb0: Digital ZLX-E1 frame buffer device at 0x1e000000 DECstation DZ serial driver version 1.04 CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78 Oops[#1]: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE $ 0 : 00000000 1000ac00 00000004 804707ac $ 4 : 00000000 80e20850 80e20858 81000030 $ 8 : 00000000 8072c81c 00000008 fefefeff $12 : 6c616972 00000006 80c5917f 69726420 $16 : 80e20800 00000000 808f8968 80e20800 $20 : 00000000 807f5a90 808b0094 808d3bc8 $24 : 00000018 80479030 $28 : 80c2e000 80c2fd70 00000069 80470a78 Hi : 00000004 Lo : 00000000 epc : 8048b3a4 __dev_fwnode+0x0/0xc ra : 80470a78 serial_base_ctrl_add+0xa0/0x168 Status: 1000ac04 IEp Cause : 30000008 (ExcCode 02) BadVA : 000000bc PrId : 00000220 (R3000) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c 808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94 80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000 00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148 80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01 ... Call Trace: [<8048b3a4>] __dev_fwnode+0x0/0xc [<80470a78>] serial_base_ctrl_add+0xa0/0x168 [<8046fc84>] serial_core_register_port+0x1c8/0x974 [<808c6af0>] dz_init+0x74/0xc8 [<800470e0>] do_one_initcall+0x44/0x2d4 [<808b111c>] kernel_init_freeable+0x258/0x308 [<8072e434>] kernel_init+0x20/0x114 [<80049cd0>] ret_from_kernel_thread+0x14/0x1c Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024 ---[ end trace 0000000000000000 ]----- where a pointer is dereferenced that has been derived from a nullpointer to the port's parent device.Since no device is available with legacy probing and it's not anymore apreferable way to discover devices anyway, switch the driver to using aplatform device and use it as the port's parent device. Update resourcehandling accordingly and only request the actual span of addresses usedwithin the slot, which will have had its resource already requested bygeneric platform device code.Use platform_driver_probe() not just because the DZ device is fixed withsolder on board and not straightforward to remove, but foremost becausethe associated TTY's major device number is the same as used by the zsdriver and the first driver to claim it will prevent the other one fromusing it. Either one DZ device or some SCC devices will be present in agiven system but never both at a time, and therefore we want the majordevice number to be claimed by the first driver to actually successfullybind to its device and platform_driver_probe() is a way to fulfil that.An unfortunate consequence of the switch to a platform device is we nowhand the console over from the bootconsole much later in the bootstrap.The firmware console handler appears good enough though to work so lateand in particular with interrupts enabled.Conversely only starting the console port so late lets the reset codefully utilise our delay handlers, so switch from udelay() to fsleep()for transmitter draining so as to avoid busy-waiting for an excessiveamount of time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: ISO: serialize iso_sock_clear_timer with socket lockiso_sock_close() calls iso_sock_clear_timer() before acquiringlock_sock(sk).iso_sock_clear_timer() reads iso_pi(sk)->conn twice without thesocket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);Concurrently, iso_conn_del() executes under lock_sock(sk) and callsiso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result inthe final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */iso_pi(sk)->conn is not stable across the unlock window, causing aNULL pointer dereference or use-after-free.Serialize iso_sock_clear_timer() with the socket lock by moving itinside lock_sock()/release_sock(), matching the pattern used iniso_conn_del() and all other call sites.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: validate Add Extended Advertising Data lengthMGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handlerthen uses cp->adv_data_len and cp->scan_rsp_len to validate and copycp->data, but it never checks that those bytes are part of the mgmtcommand payload.A short command can therefore make add_ext_adv_data() pass anout-of-bounds pointer into tlv_data_is_valid(). If the bytes beyondthe command buffer are addressable, they can also be copied into theadvertising instance as scan response data, where the caller can readthem back via MGMT_OP_GET_ADV_INSTANCE. The trigger requiresCAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byteslab-out-of-bounds read.Reject commands whose length does not match the fixed header plus bothadvertising data lengths before parsing cp->data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A malicious SCP server can send unexpected paths that could make theclient application override local files outside of working directory.This could be misused to create malicious executable or configurationfiles and make the user execute them under specific consequences.This is the same issue as in OpenSSH, tracked as CVE-2019-6111.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config > 0-0 (version in image is 0.9.8-150600.11.12.1).
Description: Vim is an open source, command line text editor. Prior to version 9.2.0565, the update_snapshot() function in src/terminal.c copies the visible terminal screen into the scrollback buffer when a snapshot is taken. For each screen cell it walks the cell's chars[] array with no upper bound, stopping only when it encounters a NUL terminator. When a cell legitimately fills all VTERM_MAX_CHARS_PER_CELL (6) slots - a base character plus five combining marks - the bundled libvterm returns the array without a terminating NUL, so the loop reads past the fixed six-element array and appends the out-of-bounds values to a buffer reserved for only six characters. A program whose output is rendered inside a :terminal window can trigger this with a short byte sequence and no Vim scripting, leading to a crash. This issue has been patched in version 9.2.0565.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim > 0-0 (version in image is 9.2.0530-150500.20.52.1).
Description: HashiCorp memberlist before version 0.6.0 is vulnerable to a denial-of-service issue in its push/pull state handling that may allow an attacker with network access to the gossip port to exhaust memory on a receiving node and cause the process to terminate. This vulnerability (CVE-2026-14362) is fixed in memberlist 0.6.0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: A flaw was found in dhcp-server. A remote attacker with network access to the OMAPI (Open Management Application Programming Interface) port, especially if not secured with TSIG (Transaction Signature) key authentication, could send a specially crafted lease creation request. This request, containing an overly long InfiniBand MAC address, triggers a buffer overflow in the `print_hw_addr()` function. Successful exploitation leads to a persistent denial of service (DoS), causing the `dhcpd` service to crash and preventing it from restarting without manual intervention.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- dhcp > 0-0 (version in image is 4.3.6.P1-150000.6.22.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: catc: enable basic endpoint checkingcatc_probe() fills three URBs with hardcoded endpoint pipes withoutverifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt statusA malformed USB device can present these endpoints with transfer typesthat differ from what the driver assumes.Add a catc_usb_ep enum for endpoint numbers, replacing magic constantsthroughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()calls after usb_set_interface() to verify endpoint types before use,rejecting devices with mismatched descriptors at probe time.Similar to- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")which fixed the issue in rtl8150.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_GetBuffer, XML_Parse, XML_ParseBuffer, XML_ParserFree, or XML_ParserReset from within handlers in cases of a policy violation. Thus, a use-after-free can occur,
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_ResumeParser from within handlers in cases of a policy violation. Thus, a use-after-free can occur (similar to the CVE-2026-50219 situation).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: libexpat before 2.8.2 does not consider XML_TOK_DATA_CHARS in doCdataSection and thus lacks handler call depth tracking for various calls from within handlers in cases of a policy violation. Thus, a use-after-free can occur. NOTE: this issue exists because of an incomplete fix for CVE-2026-50219.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: A weakness has been identified in svaarala duktape up to 2.99.99. This issue affects some unknown processing of the file duk_api_bytecode.c. Executing a manipulation of the argument count_instr can lead to memory corruption. The attack requires local access. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libduktape206 > 0-0 (version in image is 2.6.0-150500.4.5.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: avoid OGM aggregation when skb tailroom is insufficientWhen OGM aggregation state is toggled at runtime, an existing forwardedpacket may have been allocated with only packet_len bytes, while a laterpacket can still be selected for aggregation. Appending in this case canhit skb_put overflow conditions.Reject aggregation when the target skb tailroom cannot accommodate the newpacket. The caller then falls back to creating a new forward packetinstead of appending.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: Fix re-decryption of RESPONSE packetsIf a RESPONSE packet gets a temporary failure during processing, it may endup in a partially decrypted state - and then get requeued for a retry.Fix this by just discarding the packet; we will send another CHALLENGEpacket and thereby elicit a further response. Similarly, discard anincoming CHALLENGE packet if we get an error whilst generating a RESPONSE;the server will send another CHALLENGE.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: xt_policy: fix strict mode inbound policy matchingmatch_policy_in() walks sec_path entries from the last transform to thefirst one, but strict policy matching needs to consume info->pol[] inthe same forward order as the rule layout.Derive the strict-match policy position from the number of transformsalready consumed so that multi-element inbound rules are matchedconsistently.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_syncroc_abort_sync() can deadlock with roc_work(). roc_work() holdsdev->mt76.mutex, while cancel_work_sync() waits for roc_work()to finish. If the caller already owns the same mutex, bothsides block and no progress is possible.This deadlock can occur during station removal whenmt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->mt7921_roc_abort_sync() invokes cancel_work_sync() whileroc_work() is still running and holding dev->mt76.mutex.This avoids the mutex deadlock and preserves exactly-oncework ownership.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: sshd in OpenSSH before 10.4 has an undocumented security-relevant behavior: GSSAPIStrictAcceptorCheck has no value if the server is in Windows Active Directory.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: In the Linux kernel, the following vulnerability has been resolved:interconnect: Fix locking for runpm vs reclaimFor cases where icc_bw_set() can be called in callbaths that coulddeadlock against shrinker/reclaim, such as runpm resume, we need todecouple the icc locking. Introduce a new icc_bw_lock for cases wherewe need to serialize bw aggregation and update to decouple that frompaths that require memory allocation such as node/link creation/destruction.Fixes this lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.2.0-rc8-debug+ #554 Not tainted ------------------------------------------------------ ring0/132 is trying to acquire lock: ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234 but task is already holding lock: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x74/0xc0 dma_resv_lockdep+0x1f4/0x2f4 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x80/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 topology_parse_cpu_capacity+0x8c/0x178 get_cpu_for_node+0x88/0xc4 parse_cluster+0x1b0/0x28c parse_cluster+0x8c/0x28c init_cpu_topology+0x168/0x188 smp_prepare_cpus+0x24/0xf8 kernel_init_freeable+0x18c/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #2 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire+0x3c/0x48 fs_reclaim_acquire+0x54/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 kzalloc.constprop.0+0x14/0x20 icc_node_create_nolock+0x4c/0xc4 icc_node_create+0x38/0x58 qcom_icc_rpmh_probe+0x1b8/0x248 platform_probe+0x70/0xc4 really_probe+0x158/0x290 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x44/0x100 __driver_attach+0xf8/0x108 bus_for_each_dev+0x78/0xc4 driver_attach+0x2c/0x38 bus_add_driver+0xd0/0x1d8 driver_register+0xbc/0xf8 __platform_driver_register+0x30/0x3c qnoc_driver_init+0x24/0x30 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #1 (icc_lock){+.+.}-{3:3}: __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 icc_set_bw+0x88/0x2b4 _set_opp_bw+0x8c/0xd8 _set_opp+0x19c/0x300 dev_pm_opp_set_opp+0x84/0x94 a6xx_gmu_resume+0x18c/0x804 a6xx_pm_resume+0xf8/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc adreno_load_gpu+0xc4/0x17c msm_open+0x50/0x120 drm_file_alloc+0x17c/0x228 drm_open_helper+0x74/0x118 drm_open+0xa0/0x144 drm_stub_open+0xd4/0xe4 chrdev_open+0x1b8/0x1e4 do_dentry_open+0x2f8/0x38c vfs_open+0x34/0x40 path_openat+0x64c/0x7b4 do_filp_open+0x54/0xc4 do_sys_openat2+0x9c/0x100 do_sys_open+0x50/0x7c __arm64_sys_openat+0x28/0x34 invoke_syscall+0x8c/0x128 el0_svc_common.constprop.0+0xa0/0x11c do_el0_---truncated---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb3: fix lock ordering potential deadlock in cifs_sync_mid_resultCoverity spotted that the cifs_sync_mid_result function could deadlock"Thread deadlock (ORDER_REVERSAL) lock_order: Calling spin_lock acquireslock TCP_Server_Info.srv_lock while holding lock TCP_Server_Info.mid_lock"Addresses-Coverity: 1590401 ("Thread deadlock (ORDER_REVERSAL)")
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Disable idle reallow as part of command/gpint execution[Why]Workaroud for a race condition where DMCUB is in the process ofcommitting to IPS1 during the handshake causing us to miss thetransition into IPS2 and touch the INBOX1 RPTR causing a HW hang.[How]Disable the reallow to ensure that we have enough of a gap between entryand exit and we're not seeing back-to-back wake_and_executes.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xdp: use flags field to disambiguate broadcast redirectWhen redirecting a packet using XDP, the bpf_redirect_map() helper will setup the redirect destination information in struct bpf_redirect_info (usingthe __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()function will read this information after the XDP program returns and passthe frame on to the right redirect destination.When using the BPF_F_BROADCAST flag to do multicast redirect to a wholemap, __bpf_xdp_redirect_map() sets the 'map' pointer in structbpf_redirect_info to point to the destination map to be broadcast. Andxdp_do_redirect() reacts to the value of this map pointer to decide whetherit's dealing with a broadcast or a single-value redirect. However, if thedestination map is being destroyed before xdp_do_redirect() is called, themap pointer will be cleared out (by bpf_clear_redirect_map()) withoutwaiting for any XDP programs to stop running. This causes xdp_do_redirect()to think that the redirect was to a single target, but the target pointeris also NULL (since broadcast redirects don't have a single target), sothis causes a crash when a NULL pointer is passed to dev_map_enqueue().To fix this, change xdp_do_redirect() to react directly to the presence ofthe BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_infoto disambiguate between a single-target and a broadcast redirect. And onlyread the 'map' pointer if the broadcast flag is set, aborting if that hasbeen cleared out in the meantime. This prevents the crash, while keepingthe atomic (cmpxchg-based) clearing of the map pointer itself, and withoutadding any more checks in the non-broadcast fast path.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueueFix NULL pointer data-races in sk_psock_skb_ingress_enqueue() whichsyzbot reported [1].[1]BUG: KCSAN: data-race in sk_psock_drop / sk_psock_skb_ingress_enqueuewrite to 0xffff88814b3278b8 of 8 bytes by task 10724 on cpu 1: sk_psock_stop_verdict net/core/skmsg.c:1257 [inline] sk_psock_drop+0x13e/0x1f0 net/core/skmsg.c:843 sk_psock_put include/linux/skmsg.h:459 [inline] sock_map_close+0x1a7/0x260 net/core/sock_map.c:1648 unix_release+0x4b/0x80 net/unix/af_unix.c:1048 __sock_release net/socket.c:659 [inline] sock_close+0x68/0x150 net/socket.c:1421 __fput+0x2c1/0x660 fs/file_table.c:422 __fput_sync+0x44/0x60 fs/file_table.c:507 __do_sys_close fs/open.c:1556 [inline] __se_sys_close+0x101/0x1b0 fs/open.c:1541 __x64_sys_close+0x1f/0x30 fs/open.c:1541 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75read to 0xffff88814b3278b8 of 8 bytes by task 10713 on cpu 0: sk_psock_data_ready include/linux/skmsg.h:464 [inline] sk_psock_skb_ingress_enqueue+0x32d/0x390 net/core/skmsg.c:555 sk_psock_skb_ingress_self+0x185/0x1e0 net/core/skmsg.c:606 sk_psock_verdict_apply net/core/skmsg.c:1008 [inline] sk_psock_verdict_recv+0x3e4/0x4a0 net/core/skmsg.c:1202 unix_read_skb net/unix/af_unix.c:2546 [inline] unix_stream_read_skb+0x9e/0xf0 net/unix/af_unix.c:2682 sk_psock_verdict_data_ready+0x77/0x220 net/core/skmsg.c:1223 unix_stream_sendmsg+0x527/0x860 net/unix/af_unix.c:2339 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x140/0x180 net/socket.c:745 ____sys_sendmsg+0x312/0x410 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x1e9/0x280 net/socket.c:2667 __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x46/0x50 net/socket.c:2674 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75value changed: 0xffffffff83d7feb0 -> 0x0000000000000000Reported by Kernel Concurrency Sanitizer on:CPU: 0 PID: 10713 Comm: syz-executor.4 Tainted: G W 6.8.0-syzkaller-08951-gfe46a7dd189e #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024Prior to this, commit 4cd12c6065df ("bpf, sockmap: Fix NULL pointerdereference in sk_psock_verdict_data_ready()") fixed one NULL pointersimilarly due to no protection of saved_data_ready. Here is anotherdifferent caller causing the same issue because of the same reason. Sowe should protect it with sk_callback_lock read lock because the writerside in the sk_psock_drop() uses "write_lock_bh(&sk->sk_callback_lock);".To avoid errors that could happen in future, I move those two pairs oflock into the sk_psock_data_ready(), which is suggested by John Fastabend.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: fix neighbour and rtable leak in smc_ib_find_route()In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtableresolved by ip_route_output_flow() are not released or put before return.It may cause the refcount leak, so fix it.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: fec: remove .ndo_poll_controller to avoid deadlocksThere is a deadlock issue found in sungem driver, please refer to thecommit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoiddeadlocks"). The root cause of the issue is that netpoll is in atomiccontext and disable_irq() is called by .ndo_poll_controller interfaceof sungem driver, however, disable_irq() might sleep. After analyzingthe implementation of fec_poll_controller(), the fec driver should havethe same issue. Due to the fec driver uses NAPI for TX completions, the.ndo_poll_controller is unnecessary to be implemented in the fec driver,so fec_poll_controller() can be safely removed.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Reload only IB representors upon lag disable/enableOn lag disable, the bond IB device along with all of itsrepresentors are destroyed, and then the slaves' representors get reloaded.In case the slave IB representor load fails, the eswitch error flowunloads all representors, including ethernet representors, where thenetdevs get detached and removed from lag bond. Such flow is inaccurateas the lag driver is not responsible for loading/unloading ethernetrepresentors. Furthermore, the flow described above begins by holdinglag lock to prevent bond changes during disable flow. However, whenreaching the ethernet representors detachment from lag, the lag lock isrequired again, triggering the following deadlock:Call trace:__switch_to+0xf4/0x148__schedule+0x2c8/0x7d0schedule+0x50/0xe0schedule_preempt_disabled+0x18/0x28__mutex_lock.isra.13+0x2b8/0x570__mutex_lock_slowpath+0x1c/0x28mutex_lock+0x4c/0x68mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core]mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core]mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core]mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core]mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core]mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core]mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core]mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core]mlx5_disable_lag+0x130/0x138 [mlx5_core]mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lockmlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core]devlink_nl_cmd_eswitch_set_doit+0xdc/0x180genl_family_rcv_msg_doit.isra.17+0xe8/0x138genl_rcv_msg+0xe4/0x220netlink_rcv_skb+0x44/0x108genl_rcv+0x40/0x58netlink_unicast+0x198/0x268netlink_sendmsg+0x1d4/0x418sock_sendmsg+0x54/0x60__sys_sendto+0xf4/0x120__arm64_sys_sendto+0x30/0x40el0_svc_common+0x8c/0x120do_el0_svc+0x30/0xa0el0_svc+0x20/0x30el0_sync_handler+0x90/0xb8el0_sync+0x160/0x180Thus, upon lag enable/disable, load and unload only the IB representorsof the slaves preventing the deadlock mentioned above.While at it, refactor the mlx5_esw_offloads_rep_load() function to havea static helper method for its internal logic, in symmetry with therepresentor unload design.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/hns: Modify the print level of CQE errorToo much print may lead to a panic in kernel. Change ibdev_err() toibdev_err_ratelimited(), and change the printing level of cqe dumpto debug level.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix buffer size in gfx_v9_4_3_init_ cp_compute_microcode() and rlc_microcode()The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generatingabout potential truncation of output when using the snprintf function.The issue was due to the size of the buffer 'ucode_prefix' being toosmall to accommodate the maximum possible length of the string beingwritten into it.The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin",where %s is replaced by the value of 'chip_name'. The length of thisstring without the %s is 16 characters. The warning message indicatedthat 'chip_name' could be up to 29 characters long, resulting in a totalof 45 characters, which exceeds the buffer size of 30 characters.To resolve this issue, the size of the 'ucode_prefix' buffer has beenreduced from 30 to 15. This ensures that the maximum possible length ofthe string being written into the buffer will not exceed its size, thuspreventing potential buffer overflow and truncation issues.Fixes the below with gcc W=1:drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function 'gfx_v9_4_3_early_init':drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: '%s' directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~...... 439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: 'snprintf' output between 16 and 45 bytes into a destination of size 30 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: '%s' directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~...... 443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: 'snprintf' output between 16 and 45 bytes into a destination of size 30 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/vmalloc: fix data race in show_numa_info()The following data-race was found in show_numa_info():==================================================================BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_showread to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0: show_numa_info mm/vmalloc.c:4936 [inline] vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299....write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1: show_numa_info mm/vmalloc.c:4934 [inline] vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299....value changed: 0x0000008f -> 0x00000000==================================================================According to this report,there is a read/write data-race becausem->private is accessible to multiple CPUs. To fix this, instead ofallocating the heap in proc_vmalloc_init() and passing the heap address tom->private, vmalloc_info_show() should allocate the heap.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/hugetlb: fix folio is still mapped when deletedMigration may be raced with fallocating hole. remove_inode_single_foliowill unmap the folio if the folio is still mapped. However, it's calledwithout folio lock. If the folio is migrated and the mapped pte has beenconverted to migration entry, folio_mapped() returns false, and won'tunmap it. Due to extra refcount held by remove_inode_single_folio,migration fails, restores migration entry to normal pte, and the folio ismapped again. As a result, we triggered BUG in filemap_unaccount_folio.The log is as follows: BUG: Bad page cache in process hugetlb pfn:156c00 page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00 head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0 aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file" flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f4(hugetlb) page dumped because: still mapped when deleted CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x4f/0x70 filemap_unaccount_folio+0xc4/0x1c0 __filemap_remove_folio+0x38/0x1c0 filemap_remove_folio+0x41/0xd0 remove_inode_hugepages+0x142/0x250 hugetlbfs_fallocate+0x471/0x5a0 vfs_fallocate+0x149/0x380Hold folio lock before checking if the folio is mapped to avold race withmigration.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm: fix NULL pointer dereference in __dm_suspend()There is a race condition between dm device suspend and table load thatcan lead to null pointer dereference. The issue occurs when suspend isinvoked before table load completes:BUG: kernel NULL pointer dereference, address: 0000000000000054Oops: 0000 [#1] PREEMPT SMP PTICPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50Call Trace: blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0The issue can be triggered as below:T1 T2dm_suspend table_load__dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1)dm_stop_queue / dm_wait_for_completion=> q->tag_set NULL pointer! (2) => q->tag_set = set; (3)Fix this by checking if a valid table (map) exists before performingrequest-based suspend and waiting for target I/O. When map is NULL,skip these table-dependent suspend steps.Even when map is NULL, no I/O can reach any target because there isno table loaded; I/O submitted in this state will fail early in theDM layer. Skipping the table-dependent suspend logic in this caseis safe and avoids NULL pointer dereferences.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:blk-mq: fix potential deadlock while nr_requests grownAllocate and free sched_tags while queue is freezed can deadlock[1],this is a long term problem, hence allocate memory before freezingqueue and free memory after queue is unfreezed.[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: verify orphan file size is not too bigIn principle orphan file can be arbitrarily large. However orphan replayneeds to traverse it all and we also pin all its buffers in memory. Thusfilesystems with absurdly large orphan files can lead to big amounts ofmemory consumed. Limit orphan file size to a sane value and also usekvmalloc() for allocating array of block descriptor structures to avoidlarge order allocations for sane but large orphan files.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: client: fix memory leak in smb3_fs_context_parse_paramThe user calls fsconfig twice, but when the program exits, free() onlyfrees ctx->source for the second fsconfig, not the first.Regarding fc->source, there is no code in the fs context related to itsmemory reclamation.To fix this memory leak, release the source memory corresponding to ctxor fc before each parsing.syzbot reported:BUG: memory leakunreferenced object 0xffff888128afa360 (size 96): backtrace (crc 79c9c7ba): kstrdup+0x3c/0x80 mm/util.c:84 smb3_fs_context_parse_param+0x229b/0x36c0 fs/smb/client/fs_context.c:1444BUG: memory leakunreferenced object 0xffff888112c7d900 (size 96): backtrace (crc 79c9c7ba): smb3_fs_context_fullpath+0x70/0x1b0 fs/smb/client/fs_context.c:629 smb3_fs_context_parse_param+0x2266/0x36c0 fs/smb/client/fs_context.c:1438
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/radeon: delete radeon_fence_process in is_signaled, no deadlockDelete the attempt to progress the queue when checking if fence issignaled. This avoids deadlock.dma-fence_ops::signaled can be called with the fence lock in unknownstate. For radeon, the fence lock is also the wait queue lock. This cancause a self deadlock when signaled() tries to make forward progress onthe wait queue. But advancing the queue is unneeded because incorrectlyreturning false from signaled() is perfectly acceptable.(cherry picked from commit 527ba26e50ec2ca2be9c7c82f3ad42998a75d0db)
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:page_pool: always add GFP_NOWARN for ATOMIC allocationsDriver authors often forget to add GFP_NOWARN for page allocationfrom the datapath. This is annoying to users as OOMs are a factof life, and we pretty much expect network Rx to hit page allocationfailures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocationsby default.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Clear cmds after chip resetCommit aefed3e5548f ("scsi: qla2xxx: target: Fix offline port handlingand host reset handling") caused two problems:1. Commands sent to FW, after chip reset got stuck and never freed as FW is not going to respond to them anymore.2. BUG_ON(cmd->sg_mapped) in qlt_free_cmd(). Commit 26f9ce53817a ("scsi: qla2xxx: Fix missed DMA unmap for aborted commands") attempted to fix this, but introduced another bug under different circumstances when two different CPUs were racing to call qlt_unmap_sg() at the same time: BUG_ON(!valid_dma_direction(dir)) in dma_unmap_sg_attrs().So revert "scsi: qla2xxx: Fix missed DMA unmap for aborted commands" andpartially revert "scsi: qla2xxx: target: Fix offline port handling andhost reset handling" at __qla2x00_abort_all_cmds.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: don't log conflicting inode if it's a dir moved in the current transactionWe can't log a conflicting inode if it's a directory and it was movedfrom one parent directory to another parent directory in the currenttransaction, as this can result an attempt to have a directory withtwo hard links during log replay, one for the old parent directory andanother for the new parent directory.The following scenario triggers that issue:1) We have directories "dir1" and "dir2" created in a past transaction. Directory "dir1" has inode A as its parent directory;2) We move "dir1" to some other directory;3) We create a file with the name "dir1" in directory inode A;4) We fsync the new file. This results in logging the inode of the new file and the inode for the directory "dir1" that was previously moved in the current transaction. So the log tree has the INODE_REF item for the new location of "dir1";5) We move the new file to some other directory. This results in updating the log tree to included the new INODE_REF for the new location of the file and removes the INODE_REF for the old location. This happens during the rename when we call btrfs_log_new_name();6) We fsync the file, and that persists the log tree changes done in the previous step (btrfs_log_new_name() only updates the log tree in memory);7) We have a power failure;8) Next time the fs is mounted, log replay happens and when processing the inode for directory "dir1" we find a new INODE_REF and add that link, but we don't remove the old link of the inode since we have not logged the old parent directory of the directory inode "dir1".As a result after log replay finishes when we trigger writeback of thesubvolume tree's extent buffers, the tree check will detect that we havea directory a hard link count of 2 and we get a mount failure.The errors and stack traces reported in dmesg/syslog are like this: [ 3845.729764] BTRFS info (device dm-0): start tree-log replay [ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c [ 3845.731236] memcg:ffff9264c02f4e00 [ 3845.731751] aops:btree_aops [btrfs] ino:1 [ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8 [ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00 [ 3845.735305] page dumped because: eb page dump [ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir [ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5 [ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701 [ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384 [ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0 [ 3845.737797] rdev 0 sequence 2 flags 0x0 [ 3845.737798] atime 1764259517.0 [ 3845.737800] ctime 1764259517.572889464 [ 3845.737801] mtime 1764259517.572889464 [ 3845.737802] otime 1764259517.0 [ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [ 3845.737805] index 0 name_len 2 [ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34 [ 3845.737808] location key (257 1 0) type 2 [ 3845.737810] transid 9 data_len 0 name_len 4 [ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34 [ 3845.737813] location key (258 1 0) type 2 [ 3845.737814] transid 9 data_len 0 name_len 4 [ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [ 3845.737816] location key (257 1 0) type 2 [---truncated---
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fsnotify: do not generate ACCESS/MODIFY events on child for special filesinotify/fanotify do not allow users with no read access to a file tosubscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow thesame user to subscribe for watching events on children when the userhas access to the parent directory (e.g. /dev).Users with no read access to a file but with read access to its parentdirectory can still stat the file and see if it was accessed/modifiedvia atime/mtime change.The same is not true for special files (e.g. /dev/null). Users will notgenerally observe atime/mtime changes when other users read/write tospecial files, only when someone sets atime/mtime via utimensat().Align fsnotify events with this stat behavior and do not generateACCESS/MODIFY events to parent watchers on read/write of special files.The events are still generated to parent watchers on utimensat(). Thiscloses some side-channels that could be possibly used for informationexfiltration [1].[1] https://snee.la/pdf/pubs/file-notification-attacks.pdf
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: xattr: fix null pointer deref in ext4_raw_inode()If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED),iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all()lacks error checking, this will lead to a null pointer dereferencein ext4_raw_inode(), called right after ext4_get_inode_loc().Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/mediatek: fix use-after-free on probe deferralThe driver is dropping the references taken to the larb devices duringprobe after successful lookup as well as on errors. This canpotentially lead to a use-after-free in case a larb device has not yetbeen bound to its driver so that the iommu driver probe defers.Fix this by keeping the references as expected while the iommu driver isbound.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/handshake: restore destructor on submit failurehandshake_req_submit() replaces sk->sk_destruct but never restores it whensubmission fails before the request is hashed. handshake_sk_destruct() thenreturns early and the original destructor never runs, leaking the socket.Restore sk_destruct on the error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: rtl8150: fix memory leak on usb_submit_urb() failureIn async_set_registers(), when usb_submit_urb() fails, the allocated async_req structure and URB are not freed, causing a memory leak. The completion callback async_set_reg_cb() is responsible for freeing these allocations, but it is only called after the URB is successfully submitted and completes (successfully or with error). If submission fails, the callback never runs and the memory is leaked. Fix this by freeing both the URB and the request structure in the error path when usb_submit_urb() fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix deadlock in wait_current_trans() due to ignored transaction typeWhen wait_current_trans() is called during start_transaction(), itcurrently waits for a blocked transaction without considering whetherthe given transaction type actually needs to wait for that particulartransaction state. The btrfs_blocked_trans_types[] array already defineswhich transaction types should wait for which transaction states, butthis check was missing in wait_current_trans().This can lead to a deadlock scenario involving two transactions andpending ordered extents: 1. Transaction A is in TRANS_STATE_COMMIT_DOING state 2. A worker processing an ordered extent calls start_transaction() with TRANS_JOIN 3. join_transaction() returns -EBUSY because Transaction A is in TRANS_STATE_COMMIT_DOING 4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes 5. A new Transaction B is created (TRANS_STATE_RUNNING) 6. The ordered extent from step 2 is added to Transaction B's pending ordered extents 7. Transaction B immediately starts commit by another task and enters TRANS_STATE_COMMIT_START 8. The worker finally reaches wait_current_trans(), sees Transaction B in TRANS_STATE_COMMIT_START (a blocked state), and waits unconditionally 9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START according to btrfs_blocked_trans_types[] 10. Transaction B is waiting for pending ordered extents to complete 11. Deadlock: Transaction B waits for ordered extent, ordered extent waits for Transaction BThis can be illustrated by the following call stacks: CPU0 CPU1 btrfs_finish_ordered_io() start_transaction(TRANS_JOIN) join_transaction() # -EBUSY (Transaction A is # TRANS_STATE_COMMIT_DOING) # Transaction A completes # Transaction B created # ordered extent added to # Transaction B's pending list btrfs_commit_transaction() # Transaction B enters # TRANS_STATE_COMMIT_START # waiting for pending ordered # extents wait_current_trans() # waits for Transaction B # (should not wait!)Task bstore_kv_sync in btrfs_commit_transaction waiting for orderedextents: __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 btrfs_commit_transaction+0xbf7/0xda0 [btrfs] btrfs_sync_file+0x342/0x4d0 [btrfs] __x64_sys_fdatasync+0x4b/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9Task kworker in wait_current_trans waiting for transaction commit: Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs] __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 wait_current_trans+0xb0/0x110 [btrfs] start_transaction+0x346/0x5b0 [btrfs] btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs] btrfs_work_helper+0xe8/0x350 [btrfs] process_one_work+0x1d3/0x3c0 worker_thread+0x4d/0x3e0 kthread+0x12d/0x150 ret_from_fork+0x1f/0x30Fix this by passing the transaction type to wait_current_trans() andchecking btrfs_blocked_trans_types[cur_trans->state] against the giventype before deciding to wait. This ensures that transaction types whichare allowed to join during certain blocked states will not unnecessarilywait and cause deadlocks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: do not free data reservation in fallback from inline due to -ENOSPCIf we fail to create an inline extent due to -ENOSPC, we will attempt togo through the normal COW path, reserve an extent, create an orderedextent, etc. However we were always freeing the reserved qgroup data,which is wrong since we will use data. Fix this by freeing the reservedqgroup data in __cow_file_range_inline() only if we are not doing thefallback (ret is <= 0).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/display/dp_mst: Add protection against 0 vcpiWhen releasing a timeslot there is a slight chance we may end upwith the wrong payload mask due to overflow if the delayed_destroy_workends up coming into play after a DP 2.1 monitor gets disconnectedwhich causes vcpi to become 0 then we try to make the payload =~BIT(vcpi - 1) which is a negative shift. VCPI id should neverreally be 0 hence skip changing the payload mask if VCPI is 0.Otherwise it leads to<7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc[drm_display_helper]] port ffff888126ce9000 (3)<4> [515.287267] -----------[ cut here ]-----------<3> [515.287268] UBSAN: shift-out-of-bounds in../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36<3> [515.287271] shift exponent -1 is negative<4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: GS U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary)<4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER<4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-PWIFI, BIOS 1645 03/15/2024<4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work[drm_display_helper]<4> [515.287303] Call Trace:<4> [515.287304] <4> [515.287306] dump_stack_lvl+0xc1/0xf0<4> [515.287313] dump_stack+0x10/0x20<4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0<4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0<4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d[drm_display_helper]<4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe]<4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0<4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60<4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe]<4> [515.287740] ? find_held_lock+0x31/0x90<4> [515.287747] ? lock_release+0xce/0x2a0<4> [515.287754] drm_atomic_check_only+0x6a2/0xb40<4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140<4> [515.287765] drm_atomic_commit+0x6e/0xf0<4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10<4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0<4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0<4> [515.287795] ? mutex_lock_nested+0x1b/0x30<4> [515.287801] drm_client_modeset_commit+0x26/0x50<4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110<4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140<4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0<4> [515.287819] drm_client_hotplug+0x6c/0xf0<4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0<4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30<4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410[drm_display_helper]<4> [515.287861] process_one_work+0x22b/0x6f0<4> [515.287874] worker_thread+0x1e8/0x3d0<4> [515.287879] ? __pfx_worker_thread+0x10/0x10<4> [515.287882] kthread+0x11c/0x250<4> [515.287886] ? __pfx_kthread+0x10/0x10<4> [515.287890] ret_from_fork+0x2d7/0x310<4> [515.287894] ? __pfx_kthread+0x10/0x10<4> [515.287897] ret_from_fork_asm+0x1a/0x30
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:idpf: Fix RSS LUT NULL pointer crash on early ethtool operationsThe RSS LUT is not initialized until the interface comes up, causingthe following NULL pointer crash when ethtool operations like rxhash on/offare performed before the interface is brought up for the first time.Move RSS LUT initialization from ndo_open to vport creation to ensure LUTis always available. This enables RSS configuration via ethtool beforebringing the interface up. Simplify LUT management by maintaining allchanges in the driver's soft copy and programming zeros to the indirectiontable when rxhash is disabled. Defer HW programming until the interfacecomes up if it is down during rxhash and LUT configuration changes.Steps to reproduce:** Load idpf driver; interfaces will be created modprobe idpf** Before bringing the interfaces up, turn rxhash off ethtool -K eth2 rxhash off[89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000[89408.371908] #PF: supervisor read access in kernel mode[89408.371924] #PF: error_code(0x0000) - not-present page[89408.371940] PGD 0 P4D 0[89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI[89408.372052] RIP: 0010:memcpy_orig+0x16/0x130[89408.372310] Call Trace:[89408.372317] [89408.372326] ? idpf_set_features+0xfc/0x180 [idpf][89408.372363] __netdev_update_features+0x295/0xde0[89408.372384] ethnl_set_features+0x15e/0x460[89408.372406] genl_family_rcv_msg_doit+0x11f/0x180[89408.372429] genl_rcv_msg+0x1ad/0x2b0[89408.372446] ? __pfx_ethnl_set_features+0x10/0x10[89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10[89408.372482] netlink_rcv_skb+0x58/0x100[89408.372502] genl_rcv+0x2c/0x50[89408.372516] netlink_unicast+0x289/0x3e0[89408.372533] netlink_sendmsg+0x215/0x440[89408.372551] __sys_sendto+0x234/0x240[89408.372571] __x64_sys_sendto+0x28/0x30[89408.372585] x64_sys_call+0x1909/0x1da0[89408.372604] do_syscall_64+0x7a/0xfa0[89408.373140] ? clear_bhb_loop+0x60/0xb0[89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e[89408.378887]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: marvell: prestera: fix NULL dereference on devlink_alloc() failuredevlink_alloc() may return NULL on allocation failure, butprestera_devlink_alloc() unconditionally calls devlink_priv() onthe returned pointer.This leads to a NULL pointer dereference if devlink allocation fails.Add a check for a NULL devlink pointer and return NULL early to avoidthe crash.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()The for_each_available_child_of_node() calls of_node_put() torelease child_np in each success loop. After breaking from theloop with the child_np has been released, the code will jump tothe put_child label and will call the of_node_put() again if thedevm_request_threaded_irq() fails. These cause a double free bug.Fix by returning directly to avoid the duplicate of_node_put().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pNFS: Fix a deadlock when returning a delegation during open()Ben Coddington reports seeing a hang in the following stack trace: 0 [ffffd0b50e1774e0] __schedule at ffffffff9ca05415 1 [ffffd0b50e177548] schedule at ffffffff9ca05717 2 [ffffd0b50e177558] bit_wait at ffffffff9ca061e1 3 [ffffd0b50e177568] __wait_on_bit at ffffffff9ca05cfb 4 [ffffd0b50e1775c8] out_of_line_wait_on_bit at ffffffff9ca05ea5 5 [ffffd0b50e177618] pnfs_roc at ffffffffc154207b [nfsv4] 6 [ffffd0b50e1776b8] _nfs4_proc_delegreturn at ffffffffc1506586 [nfsv4] 7 [ffffd0b50e177788] nfs4_proc_delegreturn at ffffffffc1507480 [nfsv4] 8 [ffffd0b50e1777f8] nfs_do_return_delegation at ffffffffc1523e41 [nfsv4] 9 [ffffd0b50e177838] nfs_inode_set_delegation at ffffffffc1524a75 [nfsv4] 10 [ffffd0b50e177888] nfs4_process_delegation at ffffffffc14f41dd [nfsv4] 11 [ffffd0b50e1778a0] _nfs4_opendata_to_nfs4_state at ffffffffc1503edf [nfsv4] 12 [ffffd0b50e1778c0] _nfs4_open_and_get_state at ffffffffc1504e56 [nfsv4] 13 [ffffd0b50e177978] _nfs4_do_open at ffffffffc15051b8 [nfsv4] 14 [ffffd0b50e1779f8] nfs4_do_open at ffffffffc150559c [nfsv4] 15 [ffffd0b50e177a80] nfs4_atomic_open at ffffffffc15057fb [nfsv4] 16 [ffffd0b50e177ad0] nfs4_file_open at ffffffffc15219be [nfsv4] 17 [ffffd0b50e177b78] do_dentry_open at ffffffff9c09e6ea 18 [ffffd0b50e177ba8] vfs_open at ffffffff9c0a082e 19 [ffffd0b50e177bd0] dentry_open at ffffffff9c0a0935The issue is that the delegreturn is being asked to wait for a layoutreturn that cannot complete because a state recovery was initiated. Thestate recovery cannot complete until the open() finishes processing thedelegations it was given.The solution is to propagate the existing flags that indicate anon-blocking call to the function pnfs_roc(), so that it knows not towait in this situation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFS: Fix a deadlock involving nfs_release_folio()Wang Zhaolong reports a deadlock involving NFSv4.1 state recoverywaiting on kthreadd, which is attempting to reclaim memory by callingnfs_release_folio(). The latter cannot make progress due to staterecovery being needed.It seems that the only safe thing to do here is to kick off a writebackof the folio, without waiting for completion, or else kicking off anasynchronous commit.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leakFix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:gs_usb_receive_bulk_callback(): fix URB memory leak").In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), theURBs for USB-in transfers are allocated, added to the dev->rx_submittedanchor and submitted. In the complete callbackkvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. Inkvaser_usb_remove_interfaces() the URBs are freed by callingusb_kill_anchored_urbs(&dev->rx_submitted).However, this does not take into account that the USB framework unanchorsthe URB before the complete function is called. This means that once anin-URB has been completed, it is no longer anchored and is ultimately notreleased in usb_kill_anchored_urbs().Fix the memory leak by anchoring the URB in thekvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: fix potential underflow in virtio_transport_get_credit()The credit calculation in virtio_transport_get_credit() uses unsignedarithmetic: ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);If the peer shrinks its advertised buffer (peer_buf_alloc) while bytesare in flight, the subtraction can underflow and produce a largepositive value, potentially allowing more data to be queued than thepeer can handle.Reuse virtio_transport_has_space() which already handles this case andadd a comment to make it clear why we are doing that.[Stefano: use virtio_transport_has_space() instead of duplicating the code][Stefano: tweak the commit message]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_agThis is more of a preventive patch to make the code more consistent andto prevent possible exploits that employ child qlen manipulations on qfq.use cl_is_active instead of relying on the child qdisc's qlen to determineclass activation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: core: Wake up the error handler when final completions race against each otherThe fragile ordering between marking commands completed or failed sothat the error handler only wakes when the last running commandcompletes or times out has race conditions. These race conditions cancause the SCSI layer to fail to wake the error handler, leaving I/Othrough the SCSI host stuck as the error state cannot advance.First, there is an memory ordering issue within scsi_dec_host_busy().The write which clears SCMD_STATE_INFLIGHT may be reordered with readscounting in scsi_host_busy(). While the local CPU will see its ownwrite, reordering can allow other CPUs in scsi_dec_host_busy() orscsi_eh_inc_host_failed() to see a raised busy count, causing no CPU tosee a host busy equal to the host_failed count.This race condition can be prevented with a memory barrier on the errorpath to force the write to be visible before counting host busycommands.Second, there is a general ordering issue with scsi_eh_inc_host_failed(). Bycounting busy commands before incrementing host_failed, it can race with afinal command in scsi_dec_host_busy(), such that scsi_dec_host_busy() doesnot see host_failed incremented but scsi_eh_inc_host_failed() counts busycommands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(),resulting in neither waking the error handler task.This needs the call to scsi_host_busy() to be moved after host_failed isincremented to close the race condition.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath10k: fix dma_free_coherent() pointerdma_alloc_coherent() allocates a DMA mapped buffer and stores theaddresses in XXX_unaligned fields. Those should be reused when freeingthe buffer rather than the aligned addresses.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: llcp: Fix memleak in nfc_llcp_send_ui_frame().syzbot reported various memory leaks related to NFC, structnfc_llcp_sock, sk_buff, nfc_dev, etc. [0]The leading log hinted that nfc_llcp_send_ui_frame() failedto allocate skb due to sock_error(sk) being -ENXIO.ENXIO is set by nfc_llcp_socket_release() when structnfc_llcp_local is destroyed by local_cleanup().The problem is that there is no synchronisation betweennfc_llcp_send_ui_frame() and local_cleanup(), and skbcould be put into local->tx_queue after it was purged inlocal_cleanup(): CPU1 CPU2 ---- ---- nfc_llcp_send_ui_frame() local_cleanup() |- do { ' |- pdu = nfc_alloc_send_skb(..., &err) | . | |- nfc_llcp_socket_release(local, false, ENXIO); | |- skb_queue_purge(&local->tx_queue); | | ' | |- skb_queue_tail(&local->tx_queue, pdu); | ... | |- pdu = nfc_alloc_send_skb(..., &err) | ^._________________________________.'local_cleanup() is called for struct nfc_llcp_local onlyafter nfc_llcp_remove_local() unlinks it from llcp_devices.If we hold local->tx_queue.lock then, we can synchronisethe thread and nfc_llcp_send_ui_frame().Let's do that and check list_empty(&local->list) beforequeuing skb to local->tx_queue in nfc_llcp_send_ui_frame().[0]:[ 56.074943][ T6096] llcp: nfc_llcp_send_ui_frame: Could not allocate PDU (error=-6)[ 64.318868][ T5813] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak)BUG: memory leakunreferenced object 0xffff8881272f6800 (size 1024): comm "syz.0.17", pid 6096, jiffies 4294942766 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 03 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc da58d84d): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x3e3/0x6b0 mm/slub.c:5658 kmalloc_noprof include/linux/slab.h:961 [inline] sk_prot_alloc+0x11a/0x1b0 net/core/sock.c:2239 sk_alloc+0x36/0x360 net/core/sock.c:2295 nfc_llcp_sock_alloc+0x37/0x130 net/nfc/llcp_sock.c:979 llcp_sock_create+0x71/0xd0 net/nfc/llcp_sock.c:1044 nfc_sock_create+0xc9/0xf0 net/nfc/af_nfc.c:31 __sock_create+0x1a9/0x340 net/socket.c:1605 sock_create net/socket.c:1663 [inline] __sys_socket_create net/socket.c:1700 [inline] __sys_socket+0xb9/0x1a0 net/socket.c:1747 __do_sys_socket net/socket.c:1761 [inline] __se_sys_socket net/socket.c:1759 [inline] __x64_sys_socket+0x1b/0x30 net/socket.c:1759 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fBUG: memory leakunreferenced object 0xffff88810fbd9800 (size 240): comm "syz.0.17", pid 6096, jiffies 4294942850 hex dump (first 32 bytes): 68 f0 ff 08 81 88 ff ff 68 f0 ff 08 81 88 ff ff h.......h....... 00 00 00 00 00 00 00 00 00 68 2f 27 81 88 ff ff .........h/'.... backtrace (crc 6cc652b1): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4979 [inline] slab_alloc_node mm/slub.c:5284 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5336 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/sk---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: Don't clobber irqfd routing type when deassigning irqfdWhen deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ'srouting entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, tohandle a concurrent routing update, verify that the irqfd is still activebefore consuming the routing information. As evidenced by the x86 andarm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below),clobbering the entry type without notifying arch code is surprising anderror prone.As a bonus, checking that the irqfd is active provides a convenientlocation for documenting _why_ KVM must not consume the routing entry foran irqfd that is in the process of being deassigned: once the irqfd isdeleted from the list (which happens *before* the eventfd is detached), itwill no longer receive updates via kvm_irq_routing_update(), and so KVMcould deliver an event using stale routing information (relative toKVM_SET_GSI_ROUTING returning to userspace).As an even better bonus, explicitly checking for the irqfd being activefixes a similar bug to the one the clobbering is trying to prevent: if anirqfd is deactivated, and then its routing is changed,kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing()(because the irqfd isn't in the list). And so if the irqfd is in bypassmode, IRQs will continue to be posted using the old routing information.As for kvm_arch_irq_bypass_del_producer(), clobbering the routing typeresults in KVM incorrectly keeping the IRQ in bypass mode, which isespecially problematic on AMD as KVM tracks IRQs that are being posted toa vCPU in a list whose lifetime is tied to the irqfd.Without the help of KASAN to detect use-after-free, the most commonsympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due tothe memory for irqfd structure being re-allocated and zeroed, resultingin irqfd->irq_bypass_data being NULL when read byavic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b ---[ end trace 0000000000000000 ]---If AVIC is inhibited when the irfd is deassigned, the bug will manifest aslist corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: add proper RCU protection to /proc/net/ptypeYin Fengwei reported an RCU stall in ptype_seq_show() and provideda patch.Real issue is that ptype_seq_next() and ptype_seq_show() violateRCU rules.ptype_seq_show() runs under rcu_read_lock(), and reads pt->devto get device name without any barrier.At the same time, concurrent writers can remove a packet_type structure(which is correctly freed after an RCU grace period) and clear pt->devwithout an RCU grace period.Define ptype_iter_state to carry a dev pointer along seq_net_private:struct ptype_iter_state { struct seq_net_private p; struct net_device *dev; // added in this patch};We need to record the device pointer in ptype_get_idx() andptype_seq_next() so that ptype_seq_show() is safe againstconcurrent pt->dev changes.We also need to add full RCU protection in ptype_seq_next().(Missing READ_ONCE() when reading list.next values)Many thanks to Dong Chenchen for providing a repro.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu()l3mdev_master_dev_rcu() can return NULL when the slave device is beingun-slaved from a VRF. All other callers deal with this, but we lostthe fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu()with commit 4832c30d5458 ("net: ipv6: put host and anycast routes ondevice with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437)I was tempted to rework the un-slaving code to clear the flag firstand insert synchronize_rcu() before we remove the upper. But looks likethe explicit fallback to loopback_dev is an established pattern.And I guess avoiding the synchronize_rcu() is nice, too.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: usb: etas_es58x: correctly anchor the urb in the read bulk callbackWhen submitting an urb, that is using the anchor pattern, it needs to beanchored before submitting it otherwise it could be leaked ifusb_kill_anchored_urbs() is called. This logic is correctly doneelsewhere in the driver, except in the read bulk callback so do thathere also.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boostingRunning stress-ng --schedpolicy 0 on an RT kernel on a big machinemight lead to the following WARNINGs (edited). sched: DL de-boosted task PID 22725: REPLENISH flag missing WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8 ... (running_bw underflow) Call trace: dequeue_task_dl+0x15c/0x1f8 (P) dequeue_task+0x80/0x168 deactivate_task+0x24/0x50 push_dl_task+0x264/0x2e0 dl_task_timer+0x1b0/0x228 __hrtimer_run_queues+0x188/0x378 hrtimer_interrupt+0xfc/0x260 ...The problem is that when a SCHED_DEADLINE task (lock holder) ischanged to a lower priority class via sched_setscheduler(), it mayfail to properly inherit the parameters of potential DEADLINE donorsif it didn't already inherit them in the past (shorter deadline thandonor's at that time). This might lead to bandwidth accountingcorruption, as enqueue_task_dl() won't recognize the lock holder asboosted.The scenario occurs when:1. A DEADLINE task (donor) blocks on a PI mutex held by another DEADLINE task (holder), but the holder doesn't inherit parameters (e.g., it already has a shorter deadline)2. sched_setscheduler() changes the holder from DEADLINE to a lower class while still holding the mutex3. The holder should now inherit DEADLINE parameters from the donor and be enqueued with ENQUEUE_REPLENISH, but this doesn't happenFix the issue by introducing __setscheduler_dl_pi(), which detects whena DEADLINE (proper or boosted) task gets setscheduled to a lowerpriority class. In case, the function makes the task inherit DEADLINEparameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag toensure proper bandwidth accounting during the next enqueue operation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nf_tables: nft_dynset: fix possible stateful expression memleak in error pathIf cloning the second stateful expression in the element via GFP_ATOMICfails, then the first stateful expression remains in place without beingreleased. unreferenced object (percpu) 0x607b97e9cab8 (size 16): comm "softirq", pid 0, jiffies 4294931867 hex dump (first 16 bytes on cpu 3): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 backtrace (crc 0): pcpu_alloc_noprof+0x453/0xd80 nft_counter_clone+0x9c/0x190 [nf_tables] nft_expr_clone+0x8f/0x1b0 [nf_tables] nft_dynset_new+0x2cb/0x5f0 [nf_tables] nft_rhash_update+0x236/0x11c0 [nf_tables] nft_dynset_eval+0x11f/0x670 [nf_tables] nft_do_chain+0x253/0x1700 [nf_tables] nft_do_chain_ipv4+0x18d/0x270 [nf_tables] nf_hook_slow+0xaa/0x1e0 ip_local_deliver+0x209/0x330
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tls: Purge async_hold in tls_decrypt_async_wait()The async_hold queue pins encrypted input skbs whilethe AEAD engine references their scatterlist data. Oncetls_decrypt_async_wait() returns, every AEAD operationhas completed and the engine no longer references thoseskbs, so they can be freed unconditionally.A subsequent patch adds batch async decryption totls_sw_read_sock(), introducing a new call site thatmust drain pending AEAD operations and release heldskbs. Move __skb_queue_purge(&ctx->async_hold) intotls_decrypt_async_wait() so the purge is centralizedand every caller -- recvmsg's drain path, the -EBUSYfallback in tls_do_decryption(), and the new read_sockbatch path -- releases held skbs on synchronizationwithout each site managing the purge independently.This fixes a leak when tls_strp_msg_hold() fails part-way through,after having added some cloned skbs to the async_holdqueue. tls_decrypt_sg() will then call tls_decrypt_async_wait() toprocess all pending decrypts, and drop back to synchronous mode, buttls_sw_recvmsg() only flushes the async_hold queue when one record hasbeen processed in "fully-async" mode, which may not be the case here.[pabeni@redhat.com: added leak comment]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/logicvc: Fix device node reference leak in logicvc_drm_config_parse()The logicvc_drm_config_parse() function calls of_get_child_by_name() tofind the "layers" node but fails to release the reference, leading to adevice node reference leak.Fix this by using the __free(device_node) cleanup attribute to automaticrelease the reference when the variable goes out of scope.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Fix race condition during IPSec ESN updateIn IPSec full offload mode, the device reports an ESN (ExtendedSequence Number) wrap event to the driver. The driver validates thisevent by querying the IPSec ASO and checking that the esn_event_armfield is 0x0, which indicates an event has occurred. After handlingthe event, the driver must re-arm the context by setting esn_event_armback to 0x1.A race condition exists in this handling path. After validating theevent, the driver calls mlx5_accel_esp_modify_xfrm() to update thekernel's xfrm state. This function temporarily releases andre-acquires the xfrm state lock.So, need to acknowledge the event first by setting esn_event_arm to0x1. This prevents the driver from reprocessing the same ESN update ifthe hardware sends events for other reason. Since the next ESN updateonly occurs after nearly 2^31 packets are received, there's no risk ofmissing an update, as it will happen long after this handling hasfinished.Processing the event twice causes the ESN high-order bits (esn_msb) tobe incremented incorrectly. The driver then programs the hardware withthis invalid ESN state, which leads to anti-replay failures and acomplete halt of IPSec traffic.Fix this by re-arming the ESN event immediately after it is validated,before calling mlx5_accel_esp_modify_xfrm(). This ensures that anyspurious, duplicate events are correctly ignored, closing the racewindow.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PM: runtime: Fix a race condition related to device removalThe following code in pm_runtime_work() may dereference the dev->parentpointer after the parent device has been freed: /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); rpm_idle(parent, RPM_ASYNC); spin_unlock(&parent->power.lock); spin_lock(&dev->power.lock); }Fix this by inserting a flush_work() call in pm_runtime_remove().Without this patch blktest block/001 triggers the following complaintsporadically:BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081Workqueue: pm pm_runtime_workCall Trace: dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x8b/0x310 print_report+0xfd/0x1d7 kasan_report+0xd8/0x1d0 __kasan_check_byte+0x42/0x60 lock_acquire.part.0+0x38/0x230 lock_acquire+0x70/0x160 _raw_spin_lock+0x36/0x50 rpm_suspend+0xc6a/0xfe0 rpm_idle+0x578/0x770 pm_runtime_work+0xee/0x120 process_one_work+0xde3/0x1410 worker_thread+0x5eb/0xfe0 kthread+0x37b/0x480 ret_from_fork+0x6cb/0x920 ret_from_fork_asm+0x11/0x20 Allocated by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_alloc_info+0x3d/0x50 __kasan_kmalloc+0xa0/0xb0 __kmalloc_noprof+0x311/0x990 scsi_alloc_target+0x122/0xb60 [scsi_mod] __scsi_scan_target+0x101/0x460 [scsi_mod] scsi_scan_channel+0x179/0x1c0 [scsi_mod] scsi_scan_host_selected+0x259/0x2d0 [scsi_mod] store_scan+0x2d2/0x390 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 do_syscall_64+0xee/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53Freed by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_free_info+0x3f/0x50 __kasan_slab_free+0x67/0x80 kfree+0x225/0x6c0 scsi_target_dev_release+0x3d/0x60 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_dev_release+0xacf/0x12c0 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_put+0x7f/0xc0 [scsi_mod] sdev_store_delete+0xa5/0x120 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: fix statistics allocationThe controller per-cpu statistics is not allocated until after thecontroller has been registered with driver core, which leaves a windowwhere accessing the sysfs attributes can trigger a NULL-pointerdereference.Fix this by moving the statistics allocation to controller allocationwhile tying its lifetime to that of the controller (rather than usingimplicit devres).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: util-linux is a random collection of Linux utilities. Prior to version 2.41.4, a TOCTOU (Time-of-Check-Time-of-Use) vulnerability has been identified in the SUID binary /usr/bin/mount from util-linux. The mount binary, when setting up loop devices, validates the source file path with user privileges via fork() + setuid() + realpath(), but subsequently re-canonicalizes and opens it with root privileges (euid=0) without verifying that the path has not been replaced between both operations. Neither O_NOFOLLOW, nor inode comparison, nor post-open fstat() are employed. This allows a local unprivileged user to replace the source file with a symlink pointing to any root-owned file or device during the race window, causing the SUID binary to open and mount it as root. Exploitation requires an /etc/fstab entry with user,loop options whose path points to a directory where the attacker has write permission, and that /usr/bin/mount has the SUID bit set (the default configuration on virtually all Linux distributions). The impact is unauthorized read access to root-protected files and block devices, including backup images, disk volumes, and any file containing a valid filesystem. This issue has been patched in version 2.41.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libblkid1 > 0-0 (version in image is 2.39.3-150600.4.21.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvdimm/bus: Fix potential use after free in asynchronous initializationDingisoul with KASAN reports a use after free if device_add() fails innd_async_device_register().Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent whilescheduling async init") correctly added a reference on the parent deviceto be held until asynchronous initialization was complete. However, ifdevice_add() results in an allocation failure the ref count of thedevice drops to 0 prior to the parent pointer being accessed. Thusresulting in use after free.The bug bot AI correctly identified the fix. Save a reference to theparent pointer to be used to drop the parent reference regardless of theoutcome of device_add().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFSD: Defer sub-object cleanup in export put callbackssvc_export_put() calls path_put() and auth_domain_put() immediatelywhen the last reference drops, before the RCU grace period. RCUreaders in e_show() and c_show() access both ex_path (viaseq_path/d_path) and ex_client->name (via seq_escape) withoutholding a reference. If cache_clean removes the entry and drops thelast reference concurrently, the sub-objects are freed while stillin use, producing a NULL pointer dereference in d_path.Commit 2530766492ec ("nfsd: fix UAF when access ex_uuid orex_stats") moved kfree of ex_uuid and ex_stats into thecall_rcu callback, but left path_put() and auth_domain_put() runningbefore the grace period because both may sleep and call_rcucallbacks execute in softirq context.Replace call_rcu/kfree_rcu with queue_rcu_work(), which defers thecallback until after the RCU grace period and executes it in processcontext where sleeping is permitted. This allows path_put() andauth_domain_put() to be moved into the deferred callback alongsidethe other resource releases. Apply the same fix to expkey_put(),which has the identical pattern with ek_path and ek_client.A dedicated workqueue scopes the shutdown drain to only NFSDexport release work items; flushing the sharedsystem_unbound_wq would stall on unrelated work from othersubsystems. nfsd_export_shutdown() uses rcu_barrier() followedby flush_workqueue() to ensure all deferred release callbackscomplete before the export caches are destroyed.Reviwed-by: Jeff Layton
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: idxd: Fix leaking event log memoryDuring the device remove process, the device is reset, causing theconfiguration registers to go back to their default state, which iszero. As the driver is checking if the event log support was enabledbefore deallocating, it will fail if a reset happened before.Do not check if the support was enabled, the check for 'idxd->evl'being valid (only allocated if the HW capability is available) isenough.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: idxd: Fix memory leak when a wq is resetidxd_wq_disable_cleanup() which is called from the reset path for aworkqueue, sets the wq type to NONE, which for other parts of thedriver mean that the wq is empty (all its resources were released).Only set the wq type to NONE after its resources are released.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix use-after-free in update_super_work when racing with umountCommit b98535d09179 ("ext4: fix bug_on in start_this_handle during umountfilesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_workto prevent new error work from being queued via /proc/fs/ext4/xx/mb_groupsreads during unmount. However, this introduced a use-after-free becauseupdate_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() whichaccesses the kobject's kernfs_node after it has been freed by kobject_del()in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work)Instead of reordering the teardown sequence, fix this by makingext4_notify_error_sysfs() detect that sysfs has already been torn downby checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() callin that case. A dedicated mutex (s_error_notify_mutex) serializesext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()to prevent TOCTOU races where the kobject could be deleted between thestate_in_sysfs check and the sysfs_notify() call.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Fix drm_edid leak in amdgpu_dm[WHAT]When a sink is connected, aconnector->drm_edid was overwritten withoutfreeing the previous allocation, causing a memory leak on resume.[HOW]Free the previous drm_edid before updating it.(cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix potential deadlock in cpu hotplug with osnoiseThe following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK]Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/syscalls: Add spectre boundary for syscall dispatch tableThe s390 syscall number is directly controlled by userspace, but doesnot have an array_index_nospec() boundary to prevent access past thesyscall function pointer tables.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:esp: fix skb leak with espintcp and async cryptoWhen the TX queue for espintcp is full, esp_output_tail_tcp willreturn an error and not free the skb, because with synchronous crypto,the common xfrm output code will drop the packet for us.With async crypto (esp_output_done), we need to drop the skb whenesp_output_tail_tcp returns an error.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: magicmouse: avoid memory leak in magicmouse_report_fixup()The magicmouse_report_fixup() function was returning anewly kmemdup()-allocated buffer, but never freeing it.The caller of report_fixup() does not take ownership of the returnedpointer, but it *is* permitted to return a sub-portion of the inputrdesc, whose lifetime is managed by the caller.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: asus: avoid memory leak in asus_report_fixup()The asus_report_fixup() function was returning a newly allocatedkmemdup()-allocated buffer, but never freeing it. Switch todevm_kzalloc() to ensure the memory is managed and freed automaticallywhen the device is removed.The caller of report_fixup() does not take ownership of the returnedpointer, but it is permitted to return a pointer whose lifetime is atleast that of the input buffer.Also fix a harmless out-of-bounds read by copying only the originaldescriptor size.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pmdomain: bcm: bcm2835-power: Increase ASB control timeoutThe bcm2835_asb_control() function uses a tight polling loop to waitfor the ASB bridge to acknowledge a request. During intensive workloads,this handshake intermittently fails for V3D's master ASB on BCM2711,resulting in "Failed to disable ASB master for v3d" errors duringruntime PM suspend. As a consequence, the failed power-off leaves V3D ina broken state, leading to bus faults or system hangs on later accesses.As the timeout is insufficient in some scenarios, increase the pollingtimeout from 1us to 5us, which is still negligible in the context of apower domain transition. Also, replace the open-coded ktime_get_ns()/cpu_relax() polling loop with readl_poll_timeout_atomic().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:futex: Clear stale exiting pointer in futex_lock_pi() retry pathFuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSYand stores a refcounted task pointer in 'exiting'.After wait_for_owner_exiting() consumes that reference, the local pointeris never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns adifferent error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING *exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) *uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting)Fix this by resetting upon retry, essentially aligning it with requeue_pi.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: designware: amdisp: Fix resume-probe race condition issueIdentified resume-probe race condition in kernel v7.0 with the commit38fa29b01a6a ("i2c: designware: Combine the init functions"),but thisissue existed from the beginning though not detected.The amdisp i2c device requires ISP to be in power-on state for probeto succeed. To meet this requirement, this device is added to genpdto control ISP power using runtime PM. The pm_runtime_get_sync() calledbefore i2c_dw_probe() triggers PM resume, which powers on ISP and alsoinvokes the amdisp i2c runtime resume before the probe completes resultingin this race condition and a NULL dereferencing issue in v7.0Fix this race condition by using the genpd APIs directly during probe: - Call dev_pm_genpd_resume() to Power ON ISP before probe - Call dev_pm_genpd_suspend() to Power OFF ISP after probe - Set the device to suspended state with pm_runtime_set_suspended() - Enable runtime PM only after the device is fully initialized
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanupDisable the delayed work before clearing BAR mappings and doorbells toavoid running the handler after resources have been torn down. Unable to handle kernel paging request at virtual address ffff800083f46004 [...] Internal error: Oops: 0000000096000007 [#1] SMP [...] Call trace: epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P) process_one_work+0x154/0x3b0 worker_thread+0x2c8/0x400 kthread+0x148/0x210 ret_from_fork+0x10/0x20
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw88: fix device leak on probe failureDriver core holds a reference to the USB interface and its parent USBdevice while the interface is bound to a driver and there is no need totake additional references unless the structures are needed afterdisconnect.This driver takes a reference to the USB device during probe but doesnot to release it on all probe errors (e.g. when descriptor parsingfails).Drop the redundant device reference to fix the leak, reduce cargoculting, make it easier to spot drivers where an extra reference isneeded, and reduce the risk of further memory leaks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/CPU: Fix FPDSS on Zen1Zen1's hardware divider can leave, under certain circumstances, partialresults from previous operations. Those results can be leaked byanother, attacker thread.Fix that with a chicken bit.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rxrpc: fix reference count leak in rxrpc_server_keyring()This patch fixes a reference count leak in rxrpc_server_keyring()by checking if rx->securities is already set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()When dma_map_single() fails in tse_start_xmit(), the function returnsNETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells thestack the packet was consumed, the skb is never freed, leaking memoryon every DMA mapping failure.Add dev_kfree_skb_any() before returning to properly free the skb.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: uinput - fix circular locking dependency with ff-coreA lockdep circular locking dependency warning can be triggeredreproducibly when using a force-feedback gamepad with uinput (forexample, playing ELDEN RING under Wine with a Flydigi Vader 5controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutexThe cycle is caused by four lock acquisition paths:1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex.2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex.3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex.4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex.Fix this by introducing a new state_lock spinlock to protectudev->state and udev->dev access in uinput_request_send() instead ofacquiring udev->mutex. The function only needs to atomically checkdevice state and queue an input event into the ring buffer viauinput_dev_event() -- both operations are safe under a spinlock(ktime_get_ts64() and wake_up_interruptible() do not sleep). Thisbreaks the ff->mutex -> udev->mutex link since a spinlock is a leaf inthe lock ordering and cannot form cycles with mutexes.To keep state transitions visible to uinput_request_send(), protectwrites to udev->state in uinput_create_device() anduinput_destroy_device() with the same state_lock spinlock.Additionally, move init_completion(&request->done) fromuinput_request_send() to uinput_request_submit() beforeuinput_request_reserve_slot(). Once the slot is allocated,uinput_flush_requests() may call complete() on it at any time fromthe destroy path, so the completion must be initialised before therequest becomes visible.Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipv6: flowlabel: defer exclusive option free until RCU teardown`ip6fl_seq_show()` walks the global flowlabel hash under the seq-fileRCU read-side lock and prints `fl->opt->opt_nflen` when an option blockis present.Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`drops to zero in `fl_release()`. However, the surrounding`struct ip6_flowlabel` remains visible in the global hash table untillater garbage collection removes it and `fl_free_rcu()` finally tears itdown.A concurrent `/proc/net/ip6_flowlabel` reader can therefore race thatearly `kfree()` and dereference freed option state, triggering a crashin `ip6fl_seq_show()`.Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matchesthe lifetime already required for the enclosing flowlabel while readerscan still reach it under RCU.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: uvc: fix NULL pointer dereference during unbind raceCommit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanlyshutdown") introduced two stages of synchronization waits totaling 1500msin uvc_function_unbind() to prevent several types of kernel panics.However, this timing-based approach is insufficient during powermanagement (PM) transitions.When the PM subsystem starts freezing user space processes, thewait_event_interruptible_timeout() is aborted early, which allows theunbind thread to proceed and nullify the gadget pointer(cdev->gadget = NULL):[ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind()[ 814.178583][ T3173] PM: suspend entry (deep)[ 814.192487][ T3173] Freezing user space processes[ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for releaseWhen the PM subsystem resumes or aborts the suspend and tasks arerestarted, the V4L2 release path is executed and attempts to access thealready nullified gadget pointer, triggering a kernel panic:[ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake[ 814.386727][ T3173] Restarting tasks ...[ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030[ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4[ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94[ 814.404078][ T4558] Call trace:[ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4[ 814.404083][ T4558] usb_function_deactivate+0x54/0x94[ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c[ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac[ 814.404095][ T4558] v4l2_release+0xcc/0x130Address the race condition and NULL pointer dereference by:1. State Synchronization (flag + mutex)Introduce a 'func_unbound' flag in struct uvc_device. This allowsuvc_function_disconnect() to safely skip accessing the nullifiedcdev->gadget pointer. As suggested by Alan Stern, this flag is protectedby a new mutex (uvc->lock) to ensure proper memory ordering and preventinstruction reordering or speculative loads. This mutex is also used toprotect 'func_connected' for consistent state management.2. Explicit Synchronization (completion)Use a completion to synchronize uvc_function_unbind() with theuvc_vdev_release() callback. This prevents Use-After-Free (UAF) byensuring struct uvc_device is freed after all video device resourcesare released.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: u_ether: Fix race between gether_disconnect and eth_stopA race condition between gether_disconnect() and eth_stop() leads to aNULL pointer dereference. Specifically, if eth_stop() is triggeredconcurrently while gether_disconnect() is tearing down the endpoints,eth_stop() attempts to access the cleared endpoint descriptor, causingthe following NPE: Unable to handle kernel NULL pointer dereference Call trace: __dwc3_gadget_ep_enable+0x60/0x788 dwc3_gadget_ep_enable+0x70/0xe4 usb_ep_enable+0x60/0x15c eth_stop+0xb8/0x108Because eth_stop() crashes while holding the dev->lock, the threadrunning gether_disconnect() fails to acquire the same lock and spinsforever, resulting in a hardlockup: Core - Debugging Information for Hardlockup core(7) Call trace: queued_spin_lock_slowpath+0x94/0x488 _raw_spin_lock+0x64/0x6c gether_disconnect+0x19c/0x1e8 ncm_set_alt+0x68/0x1a0 composite_setup+0x6a0/0xc50The root cause is that the clearing of dev->port_usb ingether_disconnect() is delayed until the end of the function.Move the clearing of dev->port_usb to the very beginning ofgether_disconnect() while holding dev->lock. This cuts off the linkimmediately, ensuring eth_stop() will see dev->port_usb as NULL andsafely bail out.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: libertas: fix WARNING in usb_tx_blockThe function usb_tx_block() submits cardp->tx_urb without ensuring thatany previous transmission on this URB has completed. If a second calloccurs while the URB is still active (e.g. during rapid firmware loading),usb_submit_urb() detects the active state and triggers a warning:'URB submitted while active'.Fix this by enforcing serialization: call usb_kill_urb() beforesubmitting the new request. This ensures the URB is idle and safe to reuse.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block()Ignore -EBUSY when checking nested events after exiting a blocking statewhile L2 is active, as exiting to userspace will generate a spurioususerspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM'sdemise. Continuing with the wakeup isn't perfect either, as *something*has gone sideways if a vCPU is awakened in L2 with an injected event (orworse, a nested run pending), but continuing on gives the VM a decentchance of surviving without any major side effects.As explained in the Fixes commits, it _should_ be impossible for a vCPU tobe put into a blocking state with an already-injected event (exception,IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injectedevents, and thus put the vCPU into what should be an impossible state.Don't bother trying to preserve the WARN, e.g. with an anti-syzkallerKconfig, as WARNs can (hopefully) be added in paths where _KVM_ would beviolating x86 architecture, e.g. by WARNing if KVM attempts to inject anexception or interrupt while the vCPU isn't running.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:lib/crypto: chacha: Zeroize permuted_state before it leaves scopeSince the ChaCha permutation is invertible, the local variable'permuted_state' is sufficient to compute the original 'state', and thusthe key, even after the permutation has been done.While the kernel is quite inconsistent about zeroizing secrets on thestack (and some prominent userspace crypto libraries don't bother at allsince it's not guaranteed to work anyway), the kernel does try to do itas a best practice, especially in cases involving the RNG.Thus, explicitly zeroize 'permuted_state' before it goes out of scope.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:perf/x86/intel/uncore: Fix die ID init and look up bugsIn snbep_pci2phy_map_init(), in the nr_node_ids > 8 path,uncore_device_to_die() may return -1 when all CPUs associatedwith the UBOX device are offline.Remove the WARN_ON_ONCE(die_id == -1) check for two reasons:- The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan.- Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error.Separately, when NUMA is disabled on a NUMA-capable platform,pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die()to return -1 for all PCI devices. As a result,spr_update_device_location(), used on Intel SPR and EMR, ignores thecorresponding PMON units and does not add them to the RB tree.Fix this by using uncore_pcibus_to_dieid(), which retrieves topologyfrom the UBOX GIDNIDMAP register and works regardless of whether NUMAis enabled in Linux. This requires snbep_pci2phy_map_init() to beadded in spr_uncore_pci_init().Keep uncore_device_to_die() only for the nr_node_ids > 8 case, whereNUMA is expected to be enabled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i3c: mipi-i3c-hci: Fix race in DMA ring dequeueThe HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked formultiple transfers that timeout around the same time. However, thefunction is not serialized and can race with itself.When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processesincomplete transfers, and then restarts the ring. If another timeouttriggers a parallel call into the same function, the two instances mayinterfere with each other - stopping or restarting the ring at unexpectedtimes.Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect toitself.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:efi: Fix reservation of unaccepted memory tableThe reserve_unaccepted() function incorrectly calculates the size of thememblock reservation for the unaccepted memory table. It aligns thesize of the table, but fails to account for cases where the table'sstarting physical address (efi.unaccepted) is not page-aligned.If the table starts at an offset within a page and its end crosses intoa subsequent page that the aligned size does not cover, the end of thetable will not be reserved. This can lead to the table being overwrittenor inaccessible, causing a kernel panic in accept_memory().This issue was observed when starting Intel TDX VMs with specific memorysizes (e.g., > 64GB).Fix this by calculating the end address first (including the unalignedstart) and then aligning it up, ensuring the entire range is coveredby the reservation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()In `probe()`, `request_irq()` is called before allocating/registering a`power_supply` handle. If an interrupt is fired between the call to`request_irq()` and `power_supply_register()`, the `power_supply` handlewill be used uninitialized in `power_supply_changed()` in`wm97xx_bat_update()` (triggered from the interrupt handler). This willlead to a `NULL` pointer dereference sinceFix this racy `NULL` pointer dereference by making sure the IRQ isrequested _after_ the registration of the `power_supply` handle. Sincethe IRQ is the last thing requests in the `probe()` now, remove theerror path for freeing it. Instead add one for unregistering the`power_supply` handle when IRQ request fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tpm: st33zp24: Fix missing cleanup on get_burstcount() errorget_burstcount() can return -EBUSY on timeout. When this happens,st33zp24_send() returns directly without releasing the localityacquired earlier.Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clientsDuring a warm reset flow, the cl->device pointer may be NULL if thereset occurs while clients are still being enumerated. Accessingcl->device->reference_count without a NULL check leads to a kernel panic.This issue was identified during multi-unit warm reboot stress clycles.Add a defensive NULL check for cl->device to ensure stability undersuch intensive testing conditions.KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]Workqueue: ish_fw_update_wq fw_reset_work_fnCall Trace: ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp] ishtp_reset_handler+0x85/0x1a0 [intel_ishtp] fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: bq25980: Fix use-after-free in power_supply_changed()Using the `devm_` variant for requesting IRQ _before_ the `devm_`variant for allocating/registering the `power_supply` handle, means thatthe `power_supply` handle will be deallocated/unregistered _before_ theinterrupt handler (since `devm_` naturally deallocates in reverseallocation order). This means that during removal, there is a racecondition where an interrupt can fire just _after_ the `power_supply`handle has been freed, *but* just _before_ the correspondingunregistration of the IRQ handler has run.This will lead to the IRQ handler calling `power_supply_changed()` witha freed `power_supply` handle. Which usually crashes the system orotherwise silently corrupts the memory...Note that there is a similar situation which can also happen during`probe()`; the possibility of an interrupt firing _before_ registeringthe `power_supply` handle. This would then lead to the nasty situationof using the `power_supply` handle *uninitialized* in`power_supply_changed()`.Fix this racy use-after-free by making sure the IRQ is requested _after_the registration of the `power_supply` handle.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: hns3: fix double free issue for tx spare bufferIn hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structureis created for rollback. However, the tx_spare pointer in the originalring handle is incorrectly left pointing to the old backup memory.Later, if memory allocation fails in hns3_init_all_ring() during the setup,the error path attempts to free all newly allocated rings. Since tx_sparecontains a stale (non-NULL) pointer from the backup, it is mistaken fora newly allocated buffer and is erroneously freed, leading to a double-freeof the backup memory.The root cause is that the tx_spare field was not cleared after its valuewas saved in tmp_rings, leaving a dangling pointer.Fix this by setting tx_spare to NULL in the original ring structurewhen the creation of the new `tx_spare` fails. This ensures theerror cleanup path only frees genuinely newly allocated buffers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:sched/rt: Skip currently executing CPU in rto_next_cpu()CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-boundRT task, and a CFS task stuck in kernel space. When other CPUs switch fromRT to non-RT tasks, RT load balancing (LB) is triggered; withHAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the executionof rto_push_irq_work_func. During push_rt_task on CPU0,if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHEDand after the push operation completes, CPU0 calls rto_next_cpu().Since only CPU0 is overloaded in this scenario, rto_next_cpu() shouldideally return -1 (no further IPI needed).However, multiple CPUs invoking tell_cpu_to_push() during LB incrementsrd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch betweenrd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart itssearch from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work toitself and send self-IPIs repeatedly. As long as CPU0 stays overloaded andother CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,which triggers a CPU hardlockup due to continuous self-interrupts.The trigging scenario is as follows: cpu0 cpu1 cpu2 pull_rt_task tell_cpu_to_push <------------irq_work_queue_onrto_push_irq_work_func push_rt_task resched_curr(rq) pull_rt_task rto_next_cpu tell_cpu_to_push <-------------------------- atomic_inc(rto_loop_next)rd->rto_loop != next rto_next_cpu irq_work_queue_onrto_push_irq_work_funcFix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().This solution has been verified to effectively eliminate spurious self-IPIsand prevent CPU hardlockup scenarios.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocationI have been observing a number of systems aborting atinsert_dev_extents() in btrfs_create_pending_block_groups(). Thefollowing is a sample stack trace of such an abort coming from forcedchunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but thiscan theoretically happen to any DUP chunk allocation. [81.801] ------------[ cut here ]------------ [81.801] BTRFS: Transaction aborted (error -17) [81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319 [81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk [81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE [81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 [81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs] [81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282 [81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000 [81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0 [81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007 [81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000 [81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000 [81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000 [81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0 [81.810] Call Trace: [81.810] [81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs] [81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs] [81.811] kernfs_fop_write_iter+0x15f/0x240 [81.812] vfs_write+0x264/0x500 [81.812] ksys_write+0x6c/0xe0 [81.812] do_syscall_64+0x66/0x770 [81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e [81.813] RIP: 0033:0x7fec6be66197 [81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197 [81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001 [81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000 [81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002 [81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0 [81.817] [81.817] irq event stamp: 20039 [81.818] hardirqs last enabled at (20047): [] __up_console_sem+0x52/0x60 [81.818] hardirqs last disabled at (20056): [] __up_console_sem+0x37/0x60 [81.819] softirqs last enabled at (19470): [] __irq_exit_rcu+0x96/0xc0 [81.819] softirqs last disabled at (19463): [] __irq_exit_rcu+0x96/0xc0 [81.820] ---[ end trace 0000000000000000 ]--- [81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already existsInspecting these aborts with drgn, I observed a pattern of overlappingchunk_maps. Note how stripe 1 of the first chunk overlaps in physicaladdress with stripe 0 of the second chunk.Physical Start Physical End Length Logical Type Stripe----------------------------------------------------------------------------------------------------0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/20x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/20x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/20x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2Now how could this possibly happen? All chunk allocation is---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: fix inline data read failure for ztailpacking pclustersCompressed folios for ztailpacking pclusters must be valid before addingthese pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster()may assume they are already valid and then trigger a NULL pointerdereference.It is somewhat hard to reproduce because the inline data is in the sameblock as the tail of the compressed indexes, which are usually read justbefore. However, it may still happen if a fatal signal arrives whileread_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0Fix this by reading the inline data before allocating and addingthe pclusters to the I/O chains.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Clear Present bit before tearing down context entryWhen tearing down a context entry, the current implementation zeros theentire 128-bit entry using multiple 64-bit writes. This creates a windowwhere the hardware can fetch a "torn" entry - where some fields arealready zeroed while the 'Present' bit is still set - leading tounpredictable behavior or spurious faults.While x86 provides strong write ordering, the compiler may reorder writesto the two 64-bit halves of the context entry. Even without compilerreordering, the hardware fetch is not guaranteed to be atomic withrespect to multiple CPU writes.Align with the "Guidance to Software for Invalidations" in the VT-d spec(Section 6.5.3.3) by implementing the recommended ownership handshake:1. Clear only the 'Present' (P) bit of the context entry first to signal the transition of ownership from hardware to software.2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.3. Perform the required cache and context-cache invalidation to ensure hardware no longer has cached references to the entry.4. Fully zero out the entry only after the invalidation is complete.Also, add a dma_wmb() to context_set_present() to ensure the entryis fully initialized before the 'Present' bit becomes visible.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:power: supply: ab8500: Fix use-after-free in power_supply_changed()Using the `devm_` variant for requesting IRQ _before_ the `devm_`variant for allocating/registering the `power_supply` handle, means thatthe `power_supply` handle will be deallocated/unregistered _before_ theinterrupt handler (since `devm_` naturally deallocates in reverseallocation order). This means that during removal, there is a racecondition where an interrupt can fire just _after_ the `power_supply`handle has been freed, *but* just _before_ the correspondingunregistration of the IRQ handler has run.This will lead to the IRQ handler calling `power_supply_changed()` witha freed `power_supply` handle. Which usually crashes the system orotherwise silently corrupts the memory...Note that there is a similar situation which can also happen during`probe()`; the possibility of an interrupt firing _before_ registeringthe `power_supply` handle. This would then lead to the nasty situationof using the `power_supply` handle *uninitialized* in`power_supply_changed()`.Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentizedbinding") introduced this issue during a refactorization. Fix this racyuse-after-free by making sure the IRQ is requested _after_ theregistration of the `power_supply` handle.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: nau8821: Cancel delayed work on component removeAttempting to unload the driver while a jack detection work is pendingwould likely crash the kernel when it is eventually scheduled forexecution:[ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20[...][ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024[ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821][ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0[...][ 1984.896504] Call Trace:[ 1984.896511] [ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core][ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core][ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core][ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821][ 1984.896636] process_one_work+0x211/0x590[ 1984.896649] ? srso_return_thunk+0x5/0x5f[ 1984.896670] worker_thread+0x1cd/0x3a0Cancel unscheduled jdet_work or wait for its execution to finish beforethe component driver gets removed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/mlx5: Fix UMR hang in LAG error state unloadDuring firmware reset in LAG mode, a race condition causes the driverto hang indefinitely while waiting for UMR completion during deviceunload. See [1].In LAG mode the bond device is only registered on the master, so itnever sees sys_error events from the slave.During firmware reset this causes UMR waits to hang forever on unloadas the slave is dead but the master hasn't entered error state yet, soUMR posts succeed but completions never arrive.Fix this by adding a sys_error notifier that gets registered beforeMLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().This ensures error events reach the bond device throughout teardown.[1]Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/shstk: Prevent deadlock during shstk sigreturnDuring sigreturn the shadow stack signal frame is popped. The kernel doesthis by reading the shadow stack using normal read accesses. When it can'tassume the memory is shadow stack, it takes extra steps to makes sure it isreading actual shadow stack memory and not other normal readable memory. Itdoes this by holding the mmap read lock while doing the access and checkingthe flags of the VMA.Unfortunately that is not safe. If the read of the shadow stack sigframehits a page fault, the fault handler will try to recursively grab anothermmap read lock. This normally works ok, but if a writer on another CPU isalso waiting, the second read lock could fail and cause a deadlock.Fix this by not holding mmap lock during the read access to userspace.Instead use mmap_lock_speculate_...() to watch for changes between droppingmmap lock and the userspace access. Retry if anything grabbed an mmap writelock in between and could have changed the VMA.These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is onlyavailable when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACKdepend on it. On x86, PER_VMA_LOCK is a default configuration for SMPkernels. So drop support for the other configs under the assumption thatthe !SMP shadow stack user base does not exist.Currently there is a check that skips the lookup work when the SSP can beassumed to be on a shadow stack. While reorganizing the function, removethe optimization to make the tricky code flows more common, such thatissues like this cannot escape detection for so long.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: stmmac: Prevent NULL deref when RX memory exhaustedThe CPU receives frames from the MAC through conventional DMA: the CPUallocates buffers for the MAC, then the MAC fills them and returnsownership to the CPU. For each hardware RX queue, the CPU and MACcoordinate through a shared ring array of DMA descriptors: onedescriptor per DMA buffer. Each descriptor includes the buffer'sphysical address and a status flag ("OWN") indicating which side ownsthe buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to setthe flag and the MAC is only allowed to clear it, and both must movethrough the ring in sequence: thus the ring is used for both"submissions" and "completions."In the stmmac driver, stmmac_rx() bookmarks its position in the ringwith the `cur_rx` index. The main receive loop in that function checksfor rx_descs[cur_rx].own=0, gives the corresponding buffer to thenetwork stack (NULLing the pointer), and increments `cur_rx` modulo thering size. After the loop exits, stmmac_rx_refill(), which bookmarks itsposition with `dirty_rx`, allocates fresh buffers and rearms thedescriptors (setting OWN=1). If it fails any allocation, it simply stopsearly (leaving OWN=0) and will retry where it left off when next called.This means descriptors have a three-stage lifecycle (terms my own):- `empty` (OWN=1, buffer valid)- `full` (OWN=0, buffer valid and populated)- `dirty` (OWN=0, buffer NULL)But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. Inthe past (see 'Fixes:'), there was a bug where the loop could cycle`cur_rx` all the way back to the first descriptor it dirtied, resultingin a NULL dereference when mistaken for `full`. The aforementionedcommit resolved that *specific* failure by capping the loop's iterationlimit at `dma_rx_size - 1`, but this is only a partial fix: if theprevious stmmac_rx_refill() didn't complete, then there are leftover`dirty` descriptors that the loop might encounter without needing tocycle fully around. The current code therefore panics (see 'Closes:')when stmmac_rx_refill() is memory-starved long enough for `cur_rx` tocatch up to `dirty_rx`.Fix this by explicitly checking, before advancing `cur_rx`, if the nextentry is dirty; exit the loop if so. This prevents processing of thefinal, used descriptor until stmmac_rx_refill() succeeds, butfully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfixintended: so remove the clamp as well. Since stmmac_rx_zc() is acopy-paste-and-tweak of stmmac_rx() and the code structure is identical,any fix to stmmac_rx() will also need a corresponding fix forstmmac_rx_zc(). Therefore, apply the same check there.In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after theMAC sets OWN=0 on the final descriptor, it will be unable to send anyfurther DMA-complete IRQs until it's given more `empty` descriptors.Currently, the driver simply *hopes* that the next stmmac_rx_refill()succeeds, risking an indefinite stall of the receive process if not. Butthis is not a regression, so it can be addressed in a future change.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opensAs prepare can be called mulitple times, this can result in multiplegraph opens for playback path.This will result in a memory leaks, fix this by adding a check beforeopening.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()Two bugs exist in the vCPU initialisation path:1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup path jumps to 'unlock' without calling unpin_host_vcpu() or unpin_host_sve_state(), permanently leaking pin references on the host vCPU and SVE state pages. Extract a register_hyp_vcpu() helper that performs the checks and the store. When register_hyp_vcpu() returns an error, call unpin_host_vcpu() and unpin_host_sve_state() inline before falling through to the existing 'unlock' label.2. register_hyp_vcpu() publishes the new vCPU pointer into 'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU object. Ensure the store uses smp_store_release() and the load uses smp_load_acquire(). While 'vm_table_lock' currently serialises the store and the load, these barriers ensure the reader sees the fully initialised 'hyp_vcpu' object even if there were a lockless path or if the lock's own ordering guarantees were insufficient for nested object initialization.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: pm: ADD_ADDR rtx: free sk if lastWhen an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),and released at the end.If at that moment, it was the last reference being held, the sk wouldnot be freed. sock_put() should then be called instead of __sock_put().But that's not enough: if it is the last reference, sock_put() will callsk_free(), which will end up calling sk_stop_timer_sync() on the sametimer, and waiting indefinitely to finish. So it is needed to mark thatthe timer is done at the end of the timer handler when it has not beenrescheduled, not to call sk_stop_timer_sync() on "itself".
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: ah: account for ESN high bits in async callbacksAH allocates its temporary auth/ICV layout differently when ESN is enabled:the async ahash setup appends a 4-byte seqhi slot before the ICV orauth_data area, but the async completion callbacks still reconstruct thetemporary layout as if seqhi were absent.With an async AH implementation selected, that makes AH copy or comparethe wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AHwith ESN and forced async hmac(sha1), ping fails with 100% packet loss,and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36Reconstruct the callback-side layout the same way the setup path built itby skipping the ESN seqhi slot before locating the saved auth_data or ICV.Per RFC 4302, the ESN high-order 32 bits participate in the AH ICVcomputation, so the async callbacks must account for the seqhi slot.Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro showsthe corrected offset (ah4 output_done: esn=1 err=0 icv_off=24expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.obuild clean at W=1. IPv6 AH+ESN was not exercised at runtime, and thechange has not been tested against a real async hardware AH engine.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: fix accept queue count leak on transport mismatchvirtio_transport_recv_listen() calls sk_acceptq_added() beforevsock_assign_transport(). If vsock_assign_transport() fails orselects a different transport, the error path returns withoutcalling sk_acceptq_removed(), permanently incrementingsk_ack_backlog.After approximately backlog+1 such failures, sk_acceptq_is_full()returns true, causing the listener to reject all new connections.Fix by moving sk_acceptq_added() to after the transport validation,matching the pattern used by vmci_transport and hyperv_transport.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: bla: only purge non-released claimsWhen batadv_bla_purge_claims() goes through the list of claims, it is onlytraversing the hash list with an rcu_read_lock(). Due to a potentialparallel batadv_claim_put(), it can happen that it encounters a claim whichwas actually in the process of being released+freed bybatadv_claim_release(). In this case, backbone_gw is set to NULL before thedelayed RCU kfree is started. Calling batadv_bla_claim_get_backbone_gw() isthen no longer allowed because it would cause a NULL-ptr derefence.To avoid this, only claims with a valid reference counter must be purged.All others are already taken care of.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: saa7164: add ioremap return checks and cleanupsAdd checks for ioremap return values in saa7164_dev_setup(). Ifioremap for BAR0 or BAR2 fails, release the already allocated PCImemory regions, remove the device from the global list, decrementthe device count, and return -ENODEV.This prevents potential null pointer dereferences and ensures propercleanup on memory mapping failures.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_freenvmet_tcp_release_queue_work() runs on nvmet-wq and can drop thefinal controller reference through nvmet_cq_put(). If that triggersnvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work onthe same nvmet-wq.Call chain: nvmet_tcp_schedule_release_queue() kref_put(&queue->kref, nvmet_tcp_release_queue) nvmet_tcp_release_queue() queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq process_one_work() nvmet_tcp_release_queue_work() nvmet_cq_put(&queue->nvme_cq) nvmet_cq_destroy() nvmet_ctrl_put(cq->ctrl) nvmet_ctrl_free() flush_work(&ctrl->async_event_work) <--- nvmet_wq Previously Scheduled by :- nvmet_add_async_event queue_work(nvmet_wq, &ctrl->async_event_work);This trips lockdep with a possible recursive locking warning.[ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55[ 5223.061801] loop0: detected capacity change from 0 to 2097152[ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1[ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420)[ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349.[ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349[ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"[ 5233.227718] ============================================[ 5233.231283] WARNING: possible recursive locking detected[ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N[ 5233.238434] --------------------------------------------[ 5233.241852] kworker/u192:6/2413 is trying to acquire lock:[ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90[ 5233.251438] but task is already holding lock:[ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0[ 5233.261125] other info that might help us debug this:[ 5233.265333] Possible unsafe locking scenario:[ 5233.269217] CPU0[ 5233.270795] ----[ 5233.272436] lock((wq_completion)nvmet-wq);[ 5233.275241] lock((wq_completion)nvmet-wq);[ 5233.278020] *** DEADLOCK ***[ 5233.281793] May be due to missing lock nesting notation[ 5233.286195] 3 locks held by kworker/u192:6/2413:[ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0[ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0[ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530[ 5233.304290] stack backtrace:[ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full)[ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST[ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014[ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp][ 5233.306532] Call Trace:[ 5233.306534] [ 5233.306536] dump_stack_lvl+0x73/0xb0[ 5233.306552] print_deadlock_bug+0x225/0x2f0[ 5233.306556] __lock_acquire+0x13f0/0x2290[ 5233.306563] lock_acquire+0xd0/0x300[ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90[ 5233.306571] ? __flush_work+0x20b/0x530[ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90[ 5233.306577] touch_wq_lockdep_map+0x3b/0x90[ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90[ 52---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm: fix unlocked test for dm_suspended_mdThe function dm_blk_report_zones tests if the device is suspended withthe "dm_suspended_md" call. However, this function is called withoutholding any locks, so the device may be suspended just after it.Move the call to dm_suspended_md after dm_get_live_table, so that thedevice can't be suspended after the suspended state was tested.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_queue: hold bridge skb->dev while queuedbr_pass_frame_up() rewrites skb->dev from the ingress port to the bridgemaster before queueing bridge LOCAL_IN packets. NFQUEUE only holdsreferences on state.in/out and bridge physdevs, so a queued bridgepacket can retain a freed bridge master in skb->dev until reinjection.When the verdict is reinjected later, br_netif_receive_skb() re-entersthe receive path with skb->dev still pointing at the freed bridge master,triggering a use-after-free.Store skb->dev in the queue entry, hold a reference on it for the queuelifetime, and use the saved device when dropping queued packets duringNETDEV_DOWN handling.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ip6t_hbh: reject oversized option listsstruct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,but hbh_mt6_check() does not reject larger optsnr values supplied fromuserspace.Validate optsnr in the rule setup path so only match data that fits thefixed-size opts array can be installed. This follows the existing xtablespattern of rejecting invalid user-provided counts in checkentry() andkeeps the packet matching path unchanged.`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fsnotify: fix inode reference leak in fsnotify_recalc_mask()fsnotify_recalc_mask() fails to handle the return value of__fsnotify_recalc_mask(), which may return an inode pointer that needsto be released via fsnotify_drop_object() when the connector's HAS_IREFflag transitions from set to cleared.This manifests as a hung task with the following call trace: INFO: task umount:1234 blocked for more than 120 seconds. Call Trace: __schedule schedule fsnotify_sb_delete generic_shutdown_super kill_anon_super cleanup_mnt task_work_run do_exit do_group_exitThe race window that triggers the iref leak: Thread A (adding mark) Thread B (removing mark) ────────────────────── ──────────────────────── fsnotify_add_mark_locked(): fsnotify_add_mark_list(): spin_lock(conn->lock) add mark_B(evictable) to list spin_unlock(conn->lock) return /* ---- gap: no lock held ---- */ fsnotify_detach_mark(mark_A): spin_lock(mark_A->lock) clear ATTACHED flag on mark_A spin_unlock(mark_A->lock) fsnotify_put_mark(mark_A) fsnotify_recalc_mask(): spin_lock(conn->lock) __fsnotify_recalc_mask(): /* mark_A skipped: ATTACHED cleared */ /* only mark_B(evictable) remains */ want_iref = false has_iref = true /* not yet cleared */ -> HAS_IREF transitions true -> false -> returns inode pointer spin_unlock(conn->lock) /* BUG: return value discarded! * iput() and fsnotify_put_sb_watched_objects() * are never called */Fix this by deferring the transition true -> false of HAS_IREF flag fromfsnotify_recalc_mask() (Thread A) to fsnotify_put_mark() (thread B).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, sockmap: Fix af_unix null-ptr-deref in proto updateunix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state,TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`).sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe thatsocket is properly set up, which would include having a defined peer. IOW,there's a window when unix_stream_bpf_update_proto() can be called onsocket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)sock_map_sk_state_allowed(sk)...sk_pair = unix_peer(sk)sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newskBUG: kernel NULL pointer dereference, address: 0000000000000080RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7eInitial idea was to move peer assignment _before_ the sk_state update[1],but that involved an additional memory barrier, and changing the hot pathwas rejected.Then a NULL check during proto update in unix_stream_bpf_update_proto() wasconsidered[2], but the follow-up discussion[3] focused on the root cause,i.e. sockmap update taking a wrong lock. Or, more specifically, missingunix_state_lock()[4].In the end it was concluded that teaching sockmap about the af_unix lockingwould be unnecessarily complex[5].Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACTare allowed to update sockmaps, sock_map_update_elem() taking the unixlock, as it is currently implemented in unix_state_lock():spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() takenin a process context, followed by a softirq-context TC BPF programattempting to take the same spinlock -- deadlock[6].This way we circled back to the peer check idea[2].[1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/[2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/[3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/[4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/[5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/[6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/Summary of scenarios where af_unix/stream connect() may race a sockmapupdate:1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys() Implemented NULL check is sufficient. Once assigned, socket peer won't be released until socket fd is released. And that's not an issue because sock_map_update_elem_sys() bumps fd refcnf.2. connect() vs BPF program doing update Update restricted per verifier.c:may_update_sockmap() to BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only) BPF_PROG_TYPE_SOCKET_FILTER BPF_PROG_TYPE_SCHED_CLS BPF_PROG_TYPE_SCHED_ACT BPF_PROG_TYPE_XDP BPF_PROG_TYPE_SK_REUSEPORT BPF_PROG_TYPE_FLOW_DISSECTOR BPF_PROG_TYPE_SK_LOOKUP Plus one more race to consider: CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) sock_hold(newsk) smp_mb__after_atomic() ---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm/dpu: fix mismatch between power and frequencyDuring DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) dropsthe MMCX rail to MIN_SVS while the core clock frequency remains at itsoriginal (highest) rate. When runtime resume re-enables the clock, thismay result in a mismatch between the rail voltage and the clock rate.For example, in the DPU bind path, the sequence could be: cpu0: dev_sync_state -> rpmhpd_sync_state cpu1: dpu_kms_hw_inittimeline 0 ------------------------------------------------> tAfter rpmhpd_sync_state, the voltage performance is no longer guaranteedto stay at the highest level. During dpu_kms_hw_init, callingdev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail tofall to MIN_SVS while the core clock is still at its maximum frequency.When the power is re-enabled, only the clock is enabled, leading to asituation where the MMCX rail is at MIN_SVS but the core clock is at itshighest rate. In this state, the rail cannot sustain the clock rate,which may cause instability or system crash.Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspendto ensure the correct vote is restored when DPU resumes.Patchwork: https://patchwork.freedesktop.org/patch/710077/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on errorWhen hci_register_dev() fails in hci_uart_register_dev()HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu)and setting hu->hdev to NULL. This means incoming UART data will reachthe protocol-specific recv handler in hci_uart_tty_receive() afterresources are freed.Clear HCI_UART_PROTO_INIT with a write lock before callinghu->proto->close() and setting hu->hdev to NULL. The write lock ensuresall active readers have completed and no new reader can enter theprotocol recv path before resources are freed.This allows the protocol-specific recv functions to remove the"HCI_UART_REGISTERED" guard without risking a null pointer dereferenceif hci_register_dev() fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: cls_fw: fix NULL dereference of "old" filters before change()Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched:protect filter_chain list with filter_chain_lock mutex") TC filters areadded to a shared block and published to datapath before their ->change()function is called. This is a problem for cls_fw: an invalid filtercreated with the "old" method can still classify some packets before itis destroyed by the validation logic added by Xiang.Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 irq event stamp: 1045778 hardirqs last enabled at (1045784): [] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [] __dev_queue_xmit+0x78/0x14d0Then, because of the value in the packet's mark, dereference on 'q->handle'with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...]Skip "old-style" classification on shared blocks, so that the NULLdereference is fixed and WARN_ON() is not hit anymore in the shortlifetime of invalid cls_fw "old-style" filters.[1] https://sashiko.dev/#/patchset/2---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: brcmfmac: Fix error pointer dereferenceThe function brcmf_chip_add_core() can return an error pointer and isnot checked. Add checks for error pointer.Detected by Smatch:drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error:'core' dereferencing possible ERR_PTR()drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error:'core' dereferencing possible ERR_PTR()drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error:'core' dereferencing possible ERR_PTR()drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error:'core' dereferencing possible ERR_PTR()drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error:'core' dereferencing possible ERR_PTR()[add missing wifi: prefix]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix stale offload->prog pointer after constant blindingWhen a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoesJIT compilation with constant blinding enabled (bpf_jit_harden >= 2),bpf_jit_blind_constants() clones the program. The original prog is thenfreed in bpf_jit_prog_release_other(), which updates aux->prog to pointto the surviving clone, but fails to update offload->prog.This leaves offload->prog pointing to the freed original program. Whenthe network namespace is subsequently destroyed, cleanup_net() triggersbpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls__bpf_prog_offload_destroy(offload->prog). Accessing the freed progcauses a page fault:BUG: unable to handle page fault for address: ffffc900085f1038Workqueue: netns cleanup_netRIP: 0010:__bpf_prog_offload_destroy+0xc/0x80Call Trace:__bpf_offload_dev_netdev_unregister+0x257/0x350bpf_dev_bound_netdev_unregister+0x4a/0x90unregister_netdevice_many_notify+0x2a2/0x660...cleanup_net+0x21a/0x320The test sequence that triggers this reliably is:1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)2. Run xdp_metadata selftest, which creates a dev-bound-only XDP program on a veth inside a netns (./test_progs -t xdp_metadata)3. cleanup_net -> page fault in __bpf_prog_offload_destroyDev-bound-only programs are unique in that they have an offload structurebut go through the normal JIT path instead of bpf_prog_offload_compile().This means they are subject to constant blinding's prog clone-and-replace,while also having offload->prog that must stay in sync.Fix this by updating offload->prog in bpf_jit_prog_release_other(),alongside the existing aux->prog update. Both are back-pointers tothe prog that must be kept in sync when the prog is replaced.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Use RCU-safe iteration in dev_map_redirect_multi() SKB pathThe DEVMAP_HASH branch in dev_map_redirect_multi() useshlist_for_each_entry_safe() to iterate hash buckets, but this functionruns under RCU protection (called from xdp_do_generic_redirect_map()in softirq context). Concurrent writers (__dev_map_hash_update_elem,dev_map_hash_delete_elem) modify the list using RCU primitives(hlist_add_head_rcu, hlist_del_rcu).hlist_for_each_entry_safe() performs plain pointer dereferences withoutrcu_dereference(), missing the acquire barrier needed to pair withwriters' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,POWER), a reader can observe a partially-constructed node. It alsodefeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-racedetection.Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()as the lockdep condition, consistent with the rcu_dereference_check()used in the DEVMAP (non-hash) branch of the same functions. Also fixthe same incorrect lockdep_is_held(&dtab->index_lock) condition indev_map_enqueue_multi(), where the lock is not held either.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:powerpc/64s: Fix unmap race with PMD migration entriesThe following race is possible with migration swap entries ordevice-private THP entries. e.g. when move_pages is called on a PMD THPpage, then there maybe an intermediate state, where PMD entry acts asa migration swap entry (pmd_present() is true). Then if an munmaphappens at the same time, then this VM_BUG_ON() can happen inpmdp_huge_get_and_clear_full().This patch fixes that.Thread A: move_pages() syscall add_folio_for_migration() mmap_read_lock(mm) folio_isolate_lru(folio) mmap_read_unlock(mm) do_move_pages_to_node() migrate_pages() try_to_migrate_one() spin_lock(ptl) set_pmd_migration_entry() pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn set_pmd_at() # PMD: migration swap entry (pmd_present=0) spin_unlock(ptl) [page copy phase] # <--- RACE WINDOW -->Thread B: munmap() mmap_write_downgrade(mm) unmap_vmas() -> zap_pmd_range() zap_huge_pmd() __pmd_trans_huge_lock() pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry) pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl pmdp_huge_get_and_clear_full() VM_BUG_ON(!pmd_present(*pmdp)) # HITS![ 287.738700][ T1867] ------------[ cut here ]------------[ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187!cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0] pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c lr: c000000000645dec: zap_huge_pmd+0xb0/0x868 sp: c00000044037f790 msr: 800000000282b033 current = 0xc0000004032c1a00 paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09 pid = 1867, comm = a.outkernel BUG at :187!Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026enter ? for help[link register ] c000000000645dec zap_huge_pmd+0xb0/0x868[c00000044037f790] c00000044037f7d0 (unreliable)[c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868[c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40[c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8[c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128[c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310[c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238[c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8[c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40[c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350[c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec---- Exception: 3000 (System Call Vectored) at 0000000010064a2cSP (7fff9b1ee9c0) is in userspace0:mon> zhcommit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"),enabled migration for device-private PMD entries. Hence this is oneother path where this warning could get trigger from. ------------[ cut here ]------------ WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905 Modules linked in: test_hmm CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284 LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4 Call Trace: [c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable) [c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498 [c000000604707760] [c00000000063e5a4] migrate_vma_col---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix deadlock between reflink and transaction commit when using flushoncommitWhen using the flushoncommit mount option, we can have a deadlock betweena transaction commit and a reflink operation that copied an inline extentto an offset beyond the current i_size of the destination node.The deadlock happens like this:1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page();2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc;3) The delalloc flushing sees the new dirty folio of inode Y and when it attempts to flush it, it ends up at extent_writepage() and sees that the offset of the folio is beyond the i_size of inode Y, so it attempts to invalidate the folio by calling folio_invalidate(), which ends up at btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it tries to lock the folio's range in inode Y's extent io tree, but it blocks since it's currently locked by task A - during a reflink we lock the inodes and the source and destination ranges after flushing all delalloc and waiting for ordered extent completion - after that we don't expect to have dirty folios in the ranges, the exception is if we have to copy an inline extent's data (because the destination offset is not zero);4) Task A then attempts to start a transaction to update the inode item, and then it's blocked since the current transaction is in the TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the current transaction to become unblocked (its state >= TRANS_STATE_UNBLOCKED). So task A is waiting for the transaction commit done by task B, and the later waiting on the extent lock of inode Y that is currently held by task A.Syzbot recently reported this with the following stack traces: INFO: task kworker/u8:7:1053 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-46) Call Trace: context_switch kernel/sched/core.c:5298 [inline] __schedule+0x1553/0x5240 kernel/sched/core.c:6911 __schedule_loop kernel/sched/core.c:6993 [inline] schedule+0x164/0x360 kernel/sched/core.c:7008 wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704 extent_writepage fs/btrfs/extent_io.c:1852 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline] btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713 do_writepages+0x32e/0x550 mm/page-writeback.c:2554 __writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750 writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042 wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227 wb_do_writeback fs/fs-writeback.c:2374 [inline] wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414 process_one_work kernel/workqueue.c:3276 [inline] process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 INFO: task syz.4.64:6910 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.64 state:D stack:22752 pid:6910 tgid:---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/huge_memory: update file PMD counter before folio_put()__split_huge_pmd_locked() updates the file/shmem RSS counter afterdropping the PMD mapping's folio reference. If folio_put() drops the lastreference, mm_counter_file() can later read freed folio state viafolio_test_swapbacked().Move the counter update before folio_put().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoisonTwo concurrent madvise(MADV_HWPOISON) calls on the same hugetlb page cantrigger a recursive spinlock self-deadlock (AA deadlock) on hugetlb_lockwhen racing with a concurrent unmap: thread#0 thread#1 -------- -------- madvise(folio, MADV_HWPOISON) -> poisons the folio successfully madvise(folio, MADV_HWPOISON) unmap(folio) try_memory_failure_hugetlb get_huge_page_for_hwpoison spin_lock_irq(&hugetlb_lock) <- held __get_huge_page_for_hwpoison hugetlb_update_hwpoison() -> MF_HUGETLB_FOLIO_PRE_POISONED goto out: folio_put() refcount: 1 -> 0 free_huge_folio() spin_lock_irqsave(&hugetlb_lock) -> AA DEADLOCK!The out: path in __get_huge_page_for_hwpoison() calls folio_put() to dropthe GUP reference while the hugetlb_lock is still held by the hugetlb.cwrapper get_huge_page_for_hwpoison(). If concurrent unmap has releasedthe page table mapping reference, folio_put() drops the folio refcount tozero, triggering free_huge_folio() which attempts to re-acquire thenon-recursive hugetlb_lock.Fix this by moving hugetlb_lock acquisition from the hugetlb.c wrapperinto get_huge_page_for_hwpoison(). Place spin_unlock_irq() before thefolio_put() at the out: label so the folio is always released outside thelock.[akpm@linux-foundation.org: fix race, rename label per Miaohe]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: restrict SO_ATTACH_FILTER to priv usersThis patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP socketsto users with CAP_NET_ADMIN capability.This blocks potential side-channel attack where an unprivileged applicationattaches a filter to leak TCP sequence/acknowledgment numbers.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: restrict IPOPT_SSRR and IPOPT_LSRR optionsThis patch restricts setting Loose Source and Record Route (LSRR)and Strict Source and Record Route (SSRR) IP options to userswith CAP_NET_RAW capability.This prevents unprivileged applications from forcing packets to routethrough attacker-controlled nodes to leak TCP ISN and possibly otherprotocol information.While LSRR and SSRR are commonly filtered in many network environments,they may still be supported and forwarded along some network paths.RFC 7126 (Recommendations on Filtering of IPv4 Packets ContainingIPv4 Options) recommend to drop these options in 4.3 and 4.4.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: synproxy: add mutex to guard hook reference countingAs the synproxy infrastructure register netfilter hooks on-demand when auser adds the first iptables target or nftables expression, if doneconcurrently they can race each other.Introduce a mutex to serialize the refcount control blocks access fromboth frontends. While a per namespace mutex might be more efficient, itis not needed for target/expression like SYNPROXY.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: fix use-after-free on sbi->sync_decompressz_erofs_decompress_kickoff() can race with filesystem unmount, causinga use-after-free on sbi->sync_decompress.When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff()to queue z_erofs_decompressqueue_work() asynchronously. Then, after allfolios are unlocked, unmount workflow can proceed and sbi will be freedbefore accessing to sbi->sync_decompress.Thread (unmount) I/O completion kworker queue_work z_erofs_decompressqueue_work (all folios are unlocked)cleanup_mnt .. erofs_kill_sb erofs_sb_free kfree(sbi) access sbi->sync_decompress // UAF!!
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: hda/conexant: Fix missing error check for jack detectionIn cx_probe(), the return value of snd_hda_jack_detect_enable_callback()is ignored. This function returns a pointer, and if it fails (e.g., dueto memory allocation failure), it returns an error pointer which mustbe checked using IS_ERR().If the registration fails, the driver continues to probe, but the jackdetection callback will not be registered. This can lead to a kernelcrash later when the driver attempts to handle jack events or accessesthe uninitialized structure.Check the return value using IS_ERR() and propagate the error viaPTR_ERR() to the probe caller.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mailbox: mailbox-test: don't free the reused channelThe RX channel can be aliased to the TX channel if it has a differentMMIO. This special case needs to be handled when freeing the channelsotherwise a double-free occurs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lockDuring the SSR/PDR down notification the tx_lock is taken with theintent to provide synchronization with active DMA transfers.But during this period qcom_slim_ngd_down() is invoked, which ends up inslim_report_absent(), which takes the slim_controller lock. In multipleother codepaths these two locks are taken in the opposite order (i.e.slim_controller then tx_lock).The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock);The assumption is that the comment refers to the desire to not callqcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction.But any such transaction is initiated and completed within a singleqcom_slim_ngd_xfer_msg().Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torndown, all child devices are notified that the slimbus is gone and thechild devices are removed.Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid thedeadlock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()When a multi-threaded process receives a stop signal (e.g., SIGSTOP),do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on allthreads and sets signal->group_stop_count to the number of threads. Ifone of the threads concurrently calls execve(), de_thread() invokeszap_other_threads() to kill all other threads. zap_other_threads()aborts the pending group stop by resetting signal->group_stop_count to 0and clears the JOBCTL_PENDING_MASK for all other threads. However, itfails to clear the job control flags for the calling thread.When execve() completes, the calling thread returns to user mode andchecks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,it calls do_signal_stop(), which invokes task_participate_group_stop().Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement thealready-zero signal->group_stop_count, triggering a warning:sig->group_stop_count == 0WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373task_participate_group_stop+0x215/0x2d0Call Trace: do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619 get_signal+0xa8c/0x1330 kernel/signal.c:2884 arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98 do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this race condition by clearing the JOBCTL_PENDING_MASK for thecalling thread in zap_other_threads(), ensuring it does not retain anystale job control state after the thread group is destroyed. This alignswith other functions that tear down a thread group and abort groupstops, such as zap_process() and complete_signal(), which correctlyclear these flags for all threads including the current one.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfsd: reset write verifier on deferred writeback errorsnfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() todetect deferred writeback errors, but neither rotates the server's writeverifier (nn->writeverf) when this check fails. Every otherdurable-storage-failure path in these functions callscommit_reset_write_verifier() before returning an error.The missing rotation means clients holding UNSTABLE write data under thecurrent verifier will COMMIT, receive the unchanged verifier back, andconclude their data is durable - silently dropping data that failedwriteback. This violates the UNSTABLE+COMMIT durability contract(RFC 1813 ?3.3.7, RFC 8881 ?18.32).Add commit_reset_write_verifier() calls at both filemap_check_wb_err()error sites, matching the pattern used by adjacent error paths in thesame functions. The helper already filters -EAGAIN and -ESTALEinternally, so the calls are unconditionally safe.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Vim is an open source, command line text editor. Prior to 9.2.0725, the single-byte branch of spell_soundfold_sal() in src/spell.c translates a word through a spell file's SAL sound-folding rules into a caller-owned result buffer, but its result writes are guarded with reslen < MAXWLEN, allowing reslen to reach MAXWLEN before res[reslen] = NUL writes one byte past the end of the MAXWLEN-element stack buffer. A boundary-length word passed to soundfold(), or reached via sound-based spell suggestion while a SAL-based spell language is active under a non-multibyte 8-bit encoding, can corrupt the eval_soundfold() stack frame and crash the editor. This issue is fixed in version 9.2.0725.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- vim < 9.2.0780-150500.20.61.2 (version in image is 9.2.0530-150500.20.52.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: v: prevent OGM aggregation on disabled hardifWhen an interface gets disabled, the worker is correctly disabled bybatadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable().In this process, the skb aggr_list is also freed.But batadv_v_ogm_send_meshif() can still queue new skbs (viabatadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after allcores can no longer find the RCU protected list of hard interfaces. Thesequeued skbs will never be freed or consumed by batadv_v_ogm_aggr_work.The batadv_v_ogm_iface_disable() function must blockbatadv_v_ogm_queue_on_if() to avoid leak of skbs.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: mtk-snfi: unregister ECC engine on probe failure and remove() callbackmtk_snand_probe() registers the on-host NAND ECC engine, but teardown wasmissing from both probe unwind and remove-time cleanup. Add a devm cleanupaction after successful registration sonand_ecc_unregister_on_host_hw_engine() runs automatically on probefailures and during device removal.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/iucv: fix locking in .getsockoptMirror iucv_sock_setsockopt() and wrap the whole switch inlock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lockbecomes redundant and is removed.Any AF_IUCV HIPER user can potentially crash the kernel by racingrecvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferencesiucv->hs_dev->mtu after iucv_sock_close() (called from the racingrecvmsg()) has set hs_dev to NULL, producing a NULL pointer dereferenceoops.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rbd: eliminate a race in lock_dwork draining on unmapGiven how rbd_lock_add_request() and rbd_img_exclusive_lock() arewritten, lock_dwork may be (re)queued more than it's actually needed:for example in case a new I/O request comes in while we are in themiddle of rbd_acquire_lock() on behalf of another I/O request. This isexpected and with rbd_release_lock() preemptively canceling lock_dworkis benign under normal operation.A more problematic example is maybe_kick_acquire(): if (have_requests || delayed_work_pending(&rbd_dev->lock_dwork)) { dout("%s rbd_dev %p kicking lock_dwork\n", __func__, rbd_dev); mod_delayed_work(rbd_dev->task_wq, &rbd_dev->lock_dwork, 0); }It's not unrealistic for lock_dwork to get canceled right afterdelayed_work_pending() returns true and for mod_delayed_work() torequeue it right there anyway. This is a classic TOCTOU race.When it comes to unmapping the image, there is an implicit assumptionof no self-initiated exclusive lock activity past the point of returnfrom rbd_dev_image_unlock() which unlocks the lock if it happens to beheld. This unlock is assumed to be final and lock_dwork (as well asall other exclusive lock tasks, really) isn't expected to get queuedagain. However, lock_dwork is canceled only in cancel_tasks_sync()(i.e. later in the unmap sequence) and on top of that the cancellationcan get in effect nullified by maybe_kick_acquire(). This may resultin rbd_acquire_lock() executing after rbd_dev_device_release() andrbd_dev_image_release() run and free and/or reset a bunch of things.One of the possible failure modes then is a violated rbd_assert(rbd_image_format_valid(rbd_dev->image_format));in rbd_dev_header_info() which is called via rbd_dev_refresh() fromrbd_post_acquire_action().Redo exclusive lock task draining to provide saner semantics and tryto meet the assumptions around rbd_dev_image_unlock().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:qed: fix double free in qed_cxt_tables_alloc()If one of the later PF or VF CID bitmap allocations fails,qed_cid_map_alloc() jumps to cid_map_fail and frees the previouslyallocated CID bitmaps before returning an error. qed_cxt_tables_alloc()then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()again.Fix this by setting each CID bitmap pointer to NULL after bitmap_free()to avoid double free.The bug was first flagged by an experimental analysis tool we aredeveloping for kernel memory-management bugs while analyzingv6.13-rc1. The tool is still under development and is not yet publiclyavailable. Manual inspection confirms that the bug is stillpresent in v7.1-rc3.Runtime reproduction was not attempted because exercising the failingallocation path requires device-specific setup.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: btmtk: fix urb->setup_packet leak in error pathsThe setup_packet of control urb is not freed if usb_submit_urb fails orthe submitted urb is killed. Add free in these two paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath11k: fix error path leaks in some WMI WOW callsFix two instances where we used to directly return the result ofath11k_wmi_cmd_send(...). Because we did not check the return value, wealso did not free the skb in the error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Do not call map->ops->elt_free() if elt_alloc() failsIn paths where tracing_map_elt_alloc() failed to allocate objects,the map->ops->elt_alloc() call was never successful. In this case,map->ops->elt_free() should not be called.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:phonet/pep: disable BH around forwarded sk_receive_skb()The networking receive path is usually run from softirq context, butprotocols that take the socket lock may have packets stored in thebacklog and processed later from process context. In that caserelease_sock() -> __release_sock() drops the slock with spin_unlock_bh()and then calls sk->sk_backlog_rcv() with bottom halves enabled.Typical sk_backlog_rcv handlers process the socket whose backlog isbeing drained, so the BH state at entry is irrelevant for the slocksthey touch. pep_do_rcv() is different: when the inbound skb targets anexisting PEP pipe, it forwards the skb to a different *child* socketvia sk_receive_skb(). That helper takes the child slock withbh_lock_sock_nested(), which is just spin_lock_nested() and assumes BHis already off. The same child slock therefore ends up acquired withBH on (process path) and with BH off (softirq path): process context softirq context --------------- --------------- release_sock(listener) __netif_receive_skb() __release_sock() phonet_rcv() spin_unlock_bh() __sk_receive_skb(listener) [BH now ENABLED] [BH already disabled] sk_backlog_rcv: sk_backlog_rcv: pep_do_rcv() pep_do_rcv() sk_receive_skb(child) sk_receive_skb(child) bh_lock_sock_nested(child) bh_lock_sock_nested(child) => SOFTIRQ-ON-W => IN-SOFTIRQ-WLockdep flags this as inconsistent lock state, and it can become a realself-deadlock if a softirq on the same CPU tries to receive to the samechild socket while its slock is held in the BH-enabled path: WARNING: inconsistent lock state inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. (slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900 __sk_receive_skb net/core/sock.c:563 sk_receive_skb include/net/sock.h:2022 [inline] pep_do_rcv net/phonet/pep.c:675 sk_backlog_rcv include/net/sock.h:1190 __release_sock net/core/sock.c:3216 release_sock net/core/sock.c:3815 pep_sock_accept net/phonet/pep.c:879Wrap the forwarded sk_receive_skb() in local_bh_disable() /local_bh_enable() so the child slock is always acquired with BH off.local_bh_disable() nests safely on the softirq path.Discovered via in-house syzkaller fuzzing; the same root cause alsoon the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:https://pastebin.com/A3t8xzCR
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: bnep: Fix UAF read of dev->namebnep_add_connection() needs to keep holding the bnep_session_sem whilereading dev->name (just like bnep_get_connlist() does); otherwise thebnep_session() thread can concurrently free the net_device, which can forexample be triggered by a concurrent bnep_del_connection().(This UAF is fairly uninteresting from a security perspective;calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)check. It also requires completely tearing down a netdev during a fairlytight race window.)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: team: fix NULL pointer dereference in team_xmit during mode change__team_change_mode() clears team->ops with memset() before restoringsafe dummy handlers via team_adjust_ops(). A concurrent team_xmit()running under RCU on another CPU can read team->ops.transmit duringthis window and call a NULL function pointer, crashing the kernel.The race requires a mode change (CAP_NET_ADMIN) concurrent withtransmit on the team device. BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265)The original code assumed that no ports means no traffic, so modechanges could freely memset()/memcpy() the ops. AF_PACKET withforced carrier breaks that assumption.Prevent the race instead of making it safe: replace memset()/memcpy()with per-field updates that never touch transmit or receive. Thosetwo handlers are managed solely by team_adjust_ops(), which alreadyinstalls dummies when tx_en_port_count == 0 (always true during modechange since no ports are present). WRITE_ONCE/READ_ONCE preventstore/load tearing on the handler pointers.synchronize_net() before exit_op() drains in-flight readers that maystill reference old mode state from before port removal switched thehandlers to dummies.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hwmon: (lm90) Add lock protection to lm90_alertSashiko reports:lm90_alert() executes in the smbus alert context and callslm90_update_confreg() to disable the hardware alert line, withoutacquiring hwmon_lock.Concurrently, sysfs write operations (such as lm90_write_convrate) holdthe hwmon_lock, temporarily modify data->config, and then restore it.If an alert interrupt occurs concurrently with a sysfs write, the sysfspath will overwrite the alert handler's modifications to data->configand the hardware register.This unintentionally re-enables the hardware alert line while the alarm isstill active, causing an interrupt storm.Add the missing lock to lm90_alert() to solve the problem.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: core: fix adapter deregistration raceAdapters can be looked up by their id using i2c_get_adapter() whichtakes a reference to the embedded struct device.Remove the adapter from the IDR before tearing it down duringderegistration (and on registration failure) to make sure its resourcesare not accessed after having been freed (e.g. the device name).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array withcdnsp_alloc_stream_ctx(). If a later stream ring allocation or streammapping update fails, the error path frees the allocated stream ringsand stream_rings array, but leaves stream_ctx_array allocated.Free the stream context array before falling through to the stream_ringscleanup path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error pathIn do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid referencevia get_pid() and stores it in timer.it.cpu.pid. If the subsequentposix_cpu_timer_set() call fails, the function returns immediatelywithout calling posix_cpu_timer_del() to release the pid reference,causing a leak.Fix it by calling posix_cpu_timer_del() before the unlock-and-returnon the error path, consistent with the other exit paths in the samefunction.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:firmware_loader: fix device reference leak in firmware_upload_register()firmware_upload_register() -> fw_create_instance() -> device_initialize()After fw_create_instance() succeeds, the lifetime of the embedded structdevice is expected to be managed through the device core referencecounting, since fw_create_instance() has already calleddevice_initialize().In firmware_upload_register(), if alloc_lookup_fw_priv() fails afterfw_create_instance() succeeds, the code reaches free_fw_sysfs and freesfw_sysfs directly instead of releasing the device reference withput_device(). This may leave the reference count of the embedded structdevice unbalanced, resulting in a refcount leak.The issue was identified by a static analysis tool I developed andconfirmed by manual review. Fix this by using put_device(fw_dev) in thefailure path and letting fw_dev_release() handle the final cleanup,instead of freeing the instance directly from the error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: Fix next buffer leak in receive_encrypted_standard()receive_encrypted_standard() allocates next_buffer before checkingwhether the number of compound PDUs already reached MAX_COMPOUND. Ifthe limit check fails, the function returns immediately and the newlyallocated next_buffer is not assigned to server->smallbuf/server->bigbuf,making it leaked.Move the MAX_COMPOUND check before allocating next_buffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NTB: epf: Avoid calling pci_irq_vector() from hardirq contextntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derivethe vector number. pci_irq_vector() calls msi_get_virq() that takes amutex and can therefore trigger "scheduling while atomic" splats: BUG: scheduling while atomic: kworker/u33:0/55/0x00010001 ... Call trace: ... schedule+0x38/0x110 schedule_preempt_disabled+0x28/0x50 __mutex_lock.constprop.0+0x848/0x908 __mutex_lock_slowpath+0x18/0x30 mutex_lock+0x4c/0x60 msi_domain_get_virq+0xe8/0x138 pci_irq_vector+0x2c/0x60 ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf] __handle_irq_event_percpu+0x70/0x3a8 handle_irq_event+0x48/0x100 handle_edge_irq+0x100/0x1c8 ...Cache the Linux IRQ number for vector 0 when vectors are allocated anduse it as a base in the ISR. Running the ISR in a threaded IRQ handlerwould also avoid the problem, but that would be unnecessary here.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: mediatek: Fix IRQ domain leak when port fails to enableWhen mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the portfrom pcie->ports and frees the port structure. However, the IRQ domains setup earlier by mtk_pcie_init_irq_domain() are never freed.Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper,mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() whenmtk_pcie_enable_port() fails. Since the IRQ teardown must only happen inthe probe error path (during resume, child devices may have active MSImappings and the NOIRQ context prohibits sleeping locks),mtk_pcie_enable_port() is changed to return an error code so callers candistinguish the two paths and act accordingly.This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoCsupport series.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: altera: Fix resource leaks on probe failureThe chained IRQ handler is set during probe, but is only removed during thedriver remove(). If pci_host_probe() fails, the handler and INTx IRQdomain remain set even though the devm-managed host bridge storagecontaining struct altera_pcie will be released, leaving the handler witha stale data pointer.Interrupts are also enabled before pci_host_probe() is called. If probefails after that point, the controller interrupt source should be disabledbefore the chained handler and INTx domain are removed.So set the chained handler only after the INTx domain has been created.Disable controller interrupts during IRQ teardown, and tear the IRQ setupdown if pci_host_probe() fails.[mani: commit log]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: gus: check snd_ctl_new1() return valuesnd_ctl_new1() can return NULL when memory allocation fails.snd_gf1_pcm_volume_control() does not check the return value beforedereferencing kctl->id.index, which can lead to a NULL pointerdereference.Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: ndisc: fix NULL deref in accept_untracked_na()accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev)and dereferences idev->cnf.accept_untracked_na without a NULL check,even though its only caller ndisc_recv_na() already fetched andNULL-checked idev for the same device.Both reads of dev->ip6_ptr run in the same RCU read-side criticalsection, but a concurrent addrconf_ifdown() can clear dev->ip6_ptrbetween them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown()without the synchronize_net() that orders the unregister path, so there-fetch returns NULL and oopses: BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974) Read of size 4 at addr 0000000000000364 Call Trace: ndisc_recv_na (net/ipv6/ndisc.c:974) icmpv6_rcv (net/ipv6/icmp.c:1193) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479) ip6_input_finish (net/ipv6/ip6_input.c:534) ip6_input (net/ipv6/ip6_input.c:545) ip6_mc_input (net/ipv6/ip6_input.c:635) ipv6_rcv (net/ipv6/ip6_input.c:351) It is reachable by an unprivileged user via a network namespace.Pass the caller's already validated idev instead of re-fetching it; theidev stays alive for the whole RCU critical section, so it is safe evenafter dev->ip6_ptr has been cleared.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net, bpf: check master for NULL in xdp_master_redirect()xdp_master_redirect() dereferences the result ofnetdev_master_upper_dev_get_rcu() without a NULL check, but that helperreturns NULL when the receiving device has no upper-master adjacency.The reach guard only checks netif_is_bond_slave(). On bond slave releasebond_upper_dev_unlink() drops the upper-master adjacency before clearingIFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that windowstill passes netif_is_bond_slave() while master is already NULL, andfaults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interruptThe missing check dates back to the original code; commit 1921f91298d1("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master")later added the master->flags read where the fault now lands but kept theunconditional deref. Check master for NULL before use; a NULL master istreated the same as one that is not up.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nexthop: initialize extack in nh_res_bucket_migrate()nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack tocall_nexthop_res_bucket_notifiers(). Whennh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns-ENOMEM), the error is propagated back before any notifier setsextack._msg, and the error path formats the stale pointer withpr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONEthis dereferences uninitialized stack memory: Oops: general protection fault, probably for non-canonical address ... KASAN: maybe wild-memory-access in range [...] RIP: 0010:string (lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) _printk (kernel/printk/printk.c:2504) nh_res_bucket_migrate (net/ipv4/nexthop.c:1816) nh_res_table_upkeep (net/ipv4/nexthop.c:1866) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) netlink_sendmsg (net/netlink/af_netlink.c:1900) Kernel panic - not syncing: Fatal exceptionZero-initialize extack so _msg is NULL on error paths that never set it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:NFSD: NFSv4 file creation neglects setting ACLAn NFSv4 client that sets an ACL with a named principal during filecreation retrieves the ACL afterwards, and finds that it is only adefault ACL (based on the mode bits) and not the ACL that wasrequested during file creation. This violates RFC 8881 section6.4.1.3: "the ACL attribute is set as given".The issue occurs in nfsd_create_setattr(), which callsnfsd_attrs_valid() to determine whether to call nfsd_setattr().However, nfsd_attrs_valid() checks only for iattr changes andsecurity labels, but not POSIX ACLs. When only an ACL is present,the function returns false, nfsd_setattr() is skipped, and thePOSIX ACL is never applied to the inode.Subsequently, when the client retrieves the ACL, the server findsno POSIX ACL on the inode and returns one generated from the file'smode bits rather than returning the originally-specified ACL.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: pegasus: validate USB endpointsThe pegasus driver should validate that the device it is probing has theproper number and types of USB endpoints it is expecting before it bindsto it. If a malicious device were to not have the same urbs the driverwill crash later on when it blindly accesses these endpoints.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: ucan: Fix infinite loop from zero-length messagesIf a broken ucan device gets a message with the message length field setto 0, then the driver will loop for forever inucan_read_bulk_callback(), hanging the system. If the length is 0, justskip the message and go on to the next one.This has been fixed in the kvaser_usb driver in the past in commit0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop incommand parsers"), so there must be some broken devices out there likethis somewhere.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: kaweth: validate USB endpointsThe kaweth driver should validate that the device it is probing has theproper number and types of USB endpoints it is expecting before it bindsto it. If a malicious device were to not have the same urbs the driverwill crash later on when it blindly accesses these endpoints.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()A malicious USB device claiming to be a CDC Phonet modem can overflowthe skb_shared_info->frags[] array by sending an unbounded sequence offull-page bulk transfers.Drop the skb and increment the length error when the frag limit isreached. This matches the same fix that commit f0813bcd2d9d ("net:wwan: t7xx: fix potential skb->frags overflow in RX path") did for thet7xx driver.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: magicmouse: Do not crash on missing msc->inputFake USB devices can send their own report descriptors for which theinput_mapping() hook does not get called. In this case, msc->input stays NULL,leading to a crash at a later time.Detect this condition in the input_configured() hook and reject the device.This is not supposed to happen with actual magic mouse devices, but can beprovoked by imposing as a magic mouse USB device.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:HID: usbhid: fix deadlock in hid_post_reset()You can build a USB device that includes a HID componentand a storage or UAS component. The components can be resetonly together. That means that hid_pre_reset() and hid_post_reset()are in the block IO error handling. Hence no memory allocationused in them may do block IO because the IO can deadlockon the mutex held while resetting a device and calling theinterface drivers.Use GFP_NOIO for all allocations in them.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: property: Cap recursion depth in __tb_property_parse_dir()A DIRECTORY entry's value field is used as the dir_offset for arecursive call into __tb_property_parse_dir() with no depth counter.A crafted peer that chains DIRECTORY entries into a back-referenceloop drives the parser until the kernel stack is exhausted and theguard page fires. Any untrusted XDomain peer (cable, dock, in-lineinspector, adjacent host) that reaches the PROPERTIES_REQUESTcontrol-plane exchange can trigger this without authentication.Thread a depth counter through tb_property_parse() and__tb_property_parse_dir(), and reject blocks that exceedTB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than anyobserved legitimate XDomain layout.Operators who do not need XDomain host-to-host discovery can disablethe path entirely with thunderbolt.xdomain=0 on the kernel commandline.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: keyspan: fix missing indat transfer sanity checkAdd the missing sanity check on the size of usa49wg indat transfers toavoid parsing stale or uninitialised slab data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: cypress_m8: validate interrupt packet headerscypress_read_int_callback() parses the interrupt-in buffer according tothe selected Cypress packet format. Format 1 has a two-byte status/countheader and format 2 has a one-byte combined status/count header. Theusb-serial core sizes the interrupt-in buffer from the endpointdescriptor's wMaxPacketSize, and successful interrupt transfers cancomplete short when URB_SHORT_NOT_OK is not set.Check that the completed packet contains the selected header beforereading it. Malformed short reports are ignored and the interrupt URB isresubmitted through the existing retry path, preventing out-of-boundsheader-byte reads.KASAN report as below:KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0Read of size 1Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer()[ johan: use constants in header length sanity checks ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: route MIGRATE notifications to caller's netnsxfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate()in net/key/af_key.c both hardcode &init_net for the multicast thatannounces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE.XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and therest of the xfrm/af_key netlink path was made netns-aware in 2008.The other 14 multicast paths in xfrm_user.c route their event usingxs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate pathwas missed.Two consequences of the init_net hardcoding: 1. The notification (selector, old/new endpoint addresses, and the km_address) is delivered to listeners on init_net's XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on the issuing netns. An IKE daemon running in init_net therefore receives migration notifications originating from any other netns on the host. 2. An IKE daemon running inside a non-init netns and subscribed to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the notification of its own migration. IKEv2 MOBIKE / address-update handling inside a netns is silently broken.Thread struct net through km_migrate() and the xfrm_mgr.migratefunction pointer, drop the &init_net override in xfrm_send_migrate()and pfkey_send_migrate(), and pass the caller's net (already inscope in xfrm_migrate() via sock_net(skb->sk)) all the way down.struct xfrm_mgr is in-tree only and not exported as a stable API,so the function-pointer signature change is internal.pfkey_broadcast() is already netns-aware via net_generic(net,pfkey_net_id) since the pernet conversion. The five otherpfkey_broadcast() callers in af_key.c already pass xs_net(x),sock_net(sk) or a per-netns net, so this only removes the&init_net outlier.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: xpad - fix out-of-bounds access for Share buttonxpadone_process_packet() receives len directly from urb->actual_lengthand uses it to index the share-button byte at data[len - 18] ordata[len - 26]. Since both len and data[0] are under the device'scontrol, a broken controller can send a GIP_CMD_INPUT packet withactual_length < 18 (e.g. 5 bytes) and reach this code path, causingaccesses beyond the actual array.Fix this by calculating the offset and checking bounds against thepacket length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: tcpm: validate VDO count in Discover Identity ACK handlersProperly validate the count passed from a device when callingsvdm_consume_identity() or svdm_consume_identity_sop_prime() as thedevice-controlled value could index off of the static arrays, whichcould leak data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: digi_acceleport: fix hard lockup on disconnectIf submitting the OOB write urb fails persistently (e.g if the device isbeing disconnected) the driver would loop indefinitely with interruptsdisabled.Check for urb submission errors when sending OOB commands to avoidhanging if, for example, open(), set_termios() or close() races with aphysical disconnect.This is issue was flagged by Sashiko when reviewing an unrelated changeto the driver.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: misc: uss720: unregister parport on probe failureuss720_probe() registers a parport before reading the 1284 register usedto detect unsupported Belkin F5U002 adapters. If get_1284_register()fails, the error path drops the driver private data and the USB devicereference, but leaves the parport device registered.Leaving the port registered is more than a private allocation leak:parport_register_port() has already reserved a parport number andregistered the parport bus device, while pp->private_data still points atthe private data that the common error path is about to release.Undo the pre-announce registration in the get_1284_register() failurebranch before jumping to the common private-data cleanup path. Clearpriv->pp first, matching the disconnect path and avoiding a stale pointerin the private data.This issue was identified during our ongoing static-analysis research whilereviewing kernel code.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: xhci: Fix sleep in atomic context in xhci_free_streams()When a USB device with active stream endpoints is disconnected,xhci_free_streams() is called from the hub_event workqueue tofree the stream resources. It calls xhci_free_stream_info()while holding xhci->lock with irqs disabled.xhci_free_stream_info() invokes xhci_free_stream_ctx(), whichcalls dma_free_coherent() for large stream context arrays.dma_free_coherent() can sleep (e.g. via vunmap), triggeringa BUG when called from atomic context.Call trace: dma_free_attrs+0x174/0x220 xhci_free_stream_info+0xd0/0x11c xhci_free_streams+0x278/0x37c usb_free_streams+0x98/0xc0 usb_unbind_interface+0x1b8/0x2f8 device_release_driver_internal+0x1d4/0x2cc device_release_driver+0x18/0x28 bus_remove_device+0x160/0x1a4 device_del+0x1ec/0x350 usb_disable_device+0x98/0x214 usb_disconnect+0xf0/0x35c hub_event+0xab4/0x19ec process_one_work+0x278/0x63cFix this by saving the stream_info pointers and clearing theep references under the lock, then calling xhci_free_stream_info()outside the lock where sleeping is allowed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()genelink_rx_fixup() splits an aggregated RX frame into its individualpackets, using a per-packet length taken from device-supplied data. Thatlength is only bounded by GL_MAX_PACKET_LEN (1514); it is never comparedagainst how many bytes were actually received.A malicious GeneLink (GL620A) device can therefore send a short URB whoseheader claims packet_count > 1 and a first packet of up to 1514 bytes. skb_put_data(gl_skb, packet->packet_data, size);then copies past the end of the receive buffer and hands the adjacent slabcontents up the network stack, an out-of-bounds read that leaks kernel heap.No privilege is required: the path runs in the usbnet RX softirq as soon asthe interface is up. BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112) Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112) usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3405) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ...skb_pull() already verifies that the requested length fits the buffer andreturns NULL otherwise. Move it ahead of the copy and check its result, soa packet that overruns the received data is rejected before it is read.Well-formed frames, whose packets are fully present, are unaffected.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: net1080: validate packet_len before pad-byte access in rx_fixupFor an even packet_len, net1080_rx_fixup() reads the pad byte atskb->data[packet_len] before the skb->len != packet_len check furtherdown, and packet_len is only bounded against NC_MAX_PACKET. A maliciousNetChip 1080 device can send a short frame advertising a large evenpacket_len (e.g. 0x4000), so the pad-byte read lands past the end of theskb: BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14 ... net1080_rx_fixup (drivers/net/usb/net1080.c:384) usbnet_bh (drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3708) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) ...Reject the frame when packet_len >= skb->len before reading.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in github.com/go-viper/mapstructure/v2, in the field processing component using mapstructure.WeakDecode. This vulnerability allows information disclosure through detailed error messages that may leak sensitive input values via malformed user-supplied data processed in security-critical contexts.
Packages affected:
- sle-module-containers-release == 15.6 (version in image is 15.6-150600.37.2).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: handle attr_set_size() errors when truncating filesIf attr_set_size() fails while truncating down, the error is silentlyignored and the inode may be left in an inconsistent state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdpprocess_sdp() declares union nf_inet_addr rtp_addr on the stack andpasses it to the nf_nat_sip sdp_session hook after walking the SDPmedia descriptions. However rtp_addr is only initialized inside themedia loop when a recognized media type with a non-zero port is found.If the SDP body contains no m= lines, only inactive media sections(m=audio 0 ...) or only unrecognized media types, rtp_addr is neverassigned. Despite that, the function still calls hooks->sdp_session()with &rtp_addr, causing nf_nat_sdp_session() to format the stale stackvalue as an IP address and rewrite the SDP session owner and connectionlines with it.With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) thisresults in the session-level o= and c= addresses being rewritten to0.0.0.0 for inactive SDP sessions. Without stack auto-init therewritten address is whatever happened to be on the stack.Fix this by pre-initializing rtp_addr from the session-level connectionaddress (caddr) when available, and tracking via a have_rtp_addr flagwhether any valid address was established. Skip the sdp_session hookentirely when no valid address exists.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:af_unix: read UNIX_DIAG_VFS data under unix_state_lockExact UNIX diag lookups hold a reference to the socket, but not tou->path. Meanwhile, unix_release_sock() clears u->path underunix_state_lock() and drops the path reference after unlocking.Read the inode and device numbers for UNIX_DIAG_VFS while holdingunix_state_lock(), then emit the netlink attribute after dropping thelock.This keeps the VFS data stable while the reply is being built.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: avoid online resizing failures due to oversized flex bgWhen we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16Gthe following WARN_ON is triggered:==================================================================WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550Modules linked in: sg(E)CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314RIP: 0010:__alloc_pages+0x411/0x550Call Trace: __kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90==================================================================This is because flexbg_size is too large and the size of the new_group_dataarray to be allocated exceeds MAX_ORDER. Currently, the minimum value ofMAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the correspondingmaximum number of groups that can be allocated is: (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ~ 21845And the value that is down-aligned to the power of 2 is 16384. Therefore,this value is defined as MAX_RESIZE_BG, and the number of groups addedeach time does not exceed this value during resizing, and is added multipletimes to complete the online resizing. The difference is that the metadatain a flex_bg may be more dispersed.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: cyapa - add missing input core locking to suspend/resume functionsGrab input->mutex during suspend/resume functions like it is done inother input drivers. This fixes the following warning during systemsuspend/resume cycle on Samsung Exynos5250-based Snow Chromebook:------------[ cut here ]------------WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6cModules linked in: ...CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109Hardware name: Samsung Exynos (Flattened Device Tree)Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28Exception stack(0xf1625fb0 to 0xf1625ff8)...---[ end trace 0000000000000000 ]---...------------[ cut here ]------------WARNING: CPU: 1 PID: 1680 at drivers/input/input.c:2291 input_device_enabled+0x68/0x6cModules linked in: ...CPU: 1 PID: 1680 Comm: kworker/u4:12 Tainted: G W 6.6.0-rc5-next-20231009 #14109Hardware name: Samsung Exynos (Flattened Device Tree)Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0x1a8/0x1cc __warn from warn_slowpath_fmt+0x18c/0x1b4 warn_slowpath_fmt from input_device_enabled+0x68/0x6c input_device_enabled from cyapa_gen3_set_power_mode+0x13c/0x1dc cyapa_gen3_set_power_mode from cyapa_reinitialize+0x10c/0x15c cyapa_reinitialize from cyapa_resume+0x48/0x98 cyapa_resume from dpm_run_callback+0x90/0x298 dpm_run_callback from device_resume+0xb4/0x258 device_resume from async_resume+0x20/0x64 async_resume from async_run_entry_fn+0x40/0x15c async_run_entry_fn from process_scheduled_works+0xbc/0x6a8 process_scheduled_works from worker_thread+0x188/0x454 worker_thread from kthread+0x108/0x140 kthread from ret_from_fork+0x14/0x28Exception stack(0xf1625fb0 to 0xf1625ff8)...---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vfio/fsl-mc: Block calling interrupt handler without triggerThe eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object isinitially NULL and may become NULL if the user sets the triggereventfd to -1. The interrupt handler itself is guaranteed thattrigger is always valid between request_irq() and free_irq(), butthe loopback testing mechanisms to invoke the handler functionneed to test the trigger. The triggering and setting ioctl pathsboth make use of igate and are therefore mutually exclusive.The vfio-fsl-mc driver does not make use of irqfds, nor does itsupport any sort of masking operations, therefore unlike vfio-pciand vfio-platform, the flow can remain essentially unchanged.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:efi: libstub: only free priv.runtime_map when allocatedpriv.runtime_map is only allocated when efi_novamap is not set.Otherwise, it is an uninitialized value. In the error path, it is freedunconditionally. Avoid passing an uninitialized value to free_pool.Free priv.runtime_map only when it was allocated.This bug was discovered and resolved using Coverity Static AnalysisSecurity Testing (SAST) by Synopsys, Inc.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: iaa - Fix async_disable descriptor leakThe disable_async paths of iaa_compress/decompress() don't free idxddescriptors in the async_disable case. Currently this only happens inthe testcases where req->dst is set to null. Add a test to free themin those paths.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:powerpc/pseries/iommu: LPAR panics during boot up with a frozen PEAt the time of LPAR boot up, partition firmware provides Open Firmwareproperty ibm,dma-window for the PE. This property is provided on the PCIbus the PE is attached to.There are execptions where the partition firmware might not provide thisproperty for the PE at the time of LPAR boot up. One of the scenario iswhere the firmware has frozen the PE due to some error condition. ThisPE is frozen for 24 hours or unless the whole system is reinitialized.Within this time frame, if the LPAR is booted, the frozen PE will bepresented to the LPAR but ibm,dma-window property could be missing.Today, under these circumstances, the LPAR oopses with NULL pointerdereference, when configuring the PCI bus the PE is attached to. BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/hns: Fix UAF for cq async eventThe refcount of CQ is not protected by locks. When CQ asynchronousevents and CQ destruction are concurrent, CQ may have been released,which will cause UAF.Use the xa_lock() to protect the CQ refcount.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm: vc4: Fix possible null pointer dereferenceIn vc4_hdmi_audio_init() of_get_address() may returnNULL which is later dereferenced. Fix this bug by adding NULL check.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Discard command completions in internal errorFix use after free when FW completion arrives while device is ininternal error state. Avoid calling completion handler in this case,since the device will flush the command interface and trigger allcompletions manually.Kernel log:------------[ cut here ]------------refcount_t: underflow; use-after-free....RIP: 0010:refcount_warn_saturate+0xd8/0xe0...Call Trace:? __warn+0x79/0x120? refcount_warn_saturate+0xd8/0xe0? report_bug+0x17c/0x190? handle_bug+0x3c/0x60? exc_invalid_op+0x14/0x70? asm_exc_invalid_op+0x16/0x20? refcount_warn_saturate+0xd8/0xe0cmd_ent_put+0x13b/0x160 [mlx5_core]mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core]cmd_comp_notifier+0x1f/0x30 [mlx5_core]notifier_call_chain+0x35/0xb0atomic_notifier_call_chain+0x16/0x20mlx5_eq_async_int+0xf6/0x290 [mlx5_core]notifier_call_chain+0x35/0xb0atomic_notifier_call_chain+0x16/0x20irq_int_handler+0x19/0x30 [mlx5_core]__handle_irq_event_percpu+0x4b/0x160handle_irq_event+0x2e/0x80handle_edge_irq+0x98/0x230__common_interrupt+0x3b/0xa0common_interrupt+0x7b/0xa0asm_common_interrupt+0x22/0x40
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:epoll: be better about file lifetimesepoll can call out to vfs_poll() with a file pointer that may race withthe last 'fput()'. That would make f_count go down to zero, and whilethe ep->mtx locking means that the resulting file pointer tear-down willbe blocked until the poll returns, it means that f_count is alreadydead, and any use of it won't actually get a reference to the file anymore: it's dead regardless.Make sure we have a valid ref on the file pointer before we call down tovfs_poll() from the epoll routines.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:eth: sungem: remove .ndo_poll_controller to avoid deadlocksErhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20cgem_poll_controller() disables interrupts, which may sleep.We can't sleep in netpoll, it has interrupts disabled completely.Strangely, gem_poll_controller() doesn't even poll the completions,and instead acts as if an interrupt has fired so it just schedulesNAPI and exits. None of this has been necessary for years, sincenetpoll invokes NAPI directly.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Fix netif state handlingmlx5e_suspend cleans resources only if netif_device_present() returnstrue. However, mlx5e_resume changes the state of netif, viamlx5e_nic_enable, only if reg_state == NETREG_REGISTERED.In the below case, the above leads to NULL-ptr Oops[1] and memoryleaks:mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason.ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :(Hence, clean resources in this case as well.[1]BUG: kernel NULL pointer dereference, address: 0000000000000000PGD 0 P4D 0Oops: 0010 [#1] SMPCPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014RIP: 0010:0x0Code: Unable to access opcode bytes at0xffffffffffffffd6.RSP: 0018:ffff888178aaf758 EFLAGS: 00010246Call Trace: ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: exit() callback is optionalThe exit() callback is optional and shouldn't be called without checkinga valid pointer first.Also, we must clear freq_table pointer even if the exit() callback isn'tpresent.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Matching of hosts against proxy patterns can improperly treat an IPv6 zone ID as a hostname component. For example, when the NO_PROXY environment variable is set to "*.example.com", a request to "[::1%25.example.com]:80` will incorrectly match and not be proxied.
Packages affected:
- sle-module-containers-release == 15.6 (version in image is 15.6-150600.37.2).
- containerd > 0-0 (version in image is 1.7.29-150000.132.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: Log an error when close_all_cached_dirs failsUnder low-memory conditions, close_all_cached_dirs() can't move thedentries to a separate list to dput() them once the locks are dropped.This will result in a "Dentry still in use" error, so add an errormessage that makes it clear this is what happened:[ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries[ 495.281595] ------------[ cut here ]------------[ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs][ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0Also, bail out of looping through all tcons as soon as a singleallocation fails, since we're already in trouble, and kmalloc() attemptsfor subseqeuent tcons are likely to fail just like the first one did.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_ncm: Refactor bind path to use __free()After an bind/unbind cycle, the ncm->notify_req is left stale. If asubsequent bind fails, the unified error label attempts to free thisstale request, leading to a NULL pointer dereference when accessingep->ops->free_request.Refactor the error handling in the bind path to use the __free()automatic cleanup mechanism.Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020Call trace: usb_ep_free_request+0x2c/0xec ncm_bind+0x39c/0x3dc usb_add_function+0xcc/0x1f0 configfs_composite_bind+0x468/0x588 gadget_bind_driver+0x104/0x270 really_probe+0x190/0x374 __driver_probe_device+0xa0/0x12c driver_probe_device+0x3c/0x218 __device_attach_driver+0x14c/0x188 bus_for_each_drv+0x10c/0x168 __device_attach+0xfc/0x198 device_initial_probe+0x14/0x24 bus_probe_device+0x94/0x11c device_add+0x268/0x48c usb_add_gadget+0x198/0x28c dwc3_gadget_init+0x700/0x858 __dwc3_set_mode+0x3cc/0x664 process_scheduled_works+0x1d8/0x488 worker_thread+0x244/0x334 kthread+0x114/0x1bc ret_from_fork+0x10/0x20
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: hisilicon/qm - request reserved interrupt for virtual functionThe device interrupt vector 3 is an error interrupt forphysical function and a reserved interrupt for virtual function.However, the driver has not registered the reserved interrupt forvirtual function. When allocating interrupts, the number of interruptsis allocated based on powers of two, which includes this interrupt.When the system enables GICv4 and the virtual function passthroughto the virtual machine, releasing the interrupt in the drivertriggers a warning.The WARNING report is:WARNING: CPU: 62 PID: 14889 at arch/arm64/kvm/vgic/vgic-its.c:852 its_free_ite+0x94/0xb4Therefore, register a reserved interrupt for VF and set theIRQF_NO_AUTOEN flag to avoid that warning.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pid: Add a judgment for ns null in pid_nr_ns__task_pid_nr_ns ns = task_active_pid_ns(current); pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns); if (pid && ns->level <= pid->level) {Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.For example: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000 [0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000 pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : __task_pid_nr_ns+0x74/0xd0 lr : __task_pid_nr_ns+0x24/0xd0 sp : ffffffc08001bd10 x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001 x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31 x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0 x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000 x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800 x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001 x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449 x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0 Call trace: __task_pid_nr_ns+0x74/0xd0 ... __handle_irq_event_percpu+0xd4/0x284 handle_irq_event+0x48/0xb0 handle_fasteoi_irq+0x160/0x2d8 generic_handle_domain_irq+0x44/0x60 gic_handle_irq+0x4c/0x114 call_on_irq_stack+0x3c/0x74 do_interrupt_handler+0x4c/0x84 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c account_kernel_stack+0x60/0x144 exit_task_stack_account+0x1c/0x80 do_exit+0x7e4/0xaf8 ... get_signal+0x7bc/0x8d8 do_notify_resume+0x128/0x828 el0_svc+0x6c/0x70 el0t_64_sync_handler+0x68/0xbc el0t_64_sync+0x1a8/0x1ac Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower()The ethtool tsconfig Netlink path can trigger a null pointerdereference. A call chain such as: tsconfig_prepare_data() -> dev_get_hwtstamp_phylib() -> vlan_hwtstamp_get() -> generic_hwtstamp_get_lower() -> generic_hwtstamp_ioctl_lower()results in generic_hwtstamp_ioctl_lower() being called withkernel_cfg->ifr as NULL.The generic_hwtstamp_ioctl_lower() function does not expecta NULL ifr and dereferences it, leading to a system crash.Fix this by adding a NULL check for kernel_cfg->ifr ingeneric_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: act_connmark: initialize struct tc_ife to fix kernel leakIn tcf_connmark_dump(), the variable 'opt' was partially initialized using adesignatied initializer. While the padding bytes are reamineduninitialized. nla_put() copies the entire structure into anetlink message, these uninitialized bytes leaked to userspace.Initialize the structure with memset before assigning its fieldsto ensure all members and padding are cleared prior to beign copied.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iommufd: Don't overflow during division for dirty trackingIf pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflowto 0 and this triggers divide by 0.In this case the index should just be 0, so reorganize things to divideby shift and avoid hitting any overflows.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Free special fields when update [lru_,]percpu_hash mapsAs [lru_,]percpu_hash maps support BPF_KPTR_{REF,PERCPU}, missingcalls to 'bpf_obj_free_fields()' in 'pcpu_copy_value()' could cause thememory referenced by BPF_KPTR_{REF,PERCPU} fields to be held until themap gets freed.Fix this by calling 'bpf_obj_free_fields()' after'copy_map_value[,_long]()' in 'pcpu_copy_value()'.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: The infocmp command-line tool in ncurses before 6.5-20251213 has a stack-based buffer overflow in analyze_string in progs/infocmp.c.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libncurses6 > 0-0 (version in image is 6.1-150000.5.33.1).
Description: In the Linux kernel, the following vulnerability has been resolved:team: fix check for port enabled in team_queue_override_port_prio_changed()There has been a syzkaller bug reported recently with the followingtrace:list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122)------------[ cut here ]------------kernel BUG at lib/list_debug.c:59!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTICPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014RIP: 0010:__list_del_entry_valid_or_report+0x13e/0x200 lib/list_debug.c:59Code: 48 c7 c7 e0 71 f0 8b e8 30 08 ef fc 90 0f 0b 48 89 ef e8 a5 02 55 fd 48 89 ea 48 89 de 48 c7 c7 40 72 f0 8b e8 13 08 ef fc 90 <0f> 0b 48 89 ef e8 88 02 55 fd 48 89 ea 48 b8 00 00 00 00 00 fc ffRSP: 0018:ffffc9000d49f370 EFLAGS: 00010286RAX: 000000000000004e RBX: ffff888058bea080 RCX: ffffc9002817d000RDX: 0000000000000000 RSI: ffffffff819becc6 RDI: 0000000000000005RBP: dead000000000122 R08: 0000000000000005 R09: 0000000000000000R10: 0000000080000000 R11: 0000000000000001 R12: ffff888039e9c230R13: ffff888058bea088 R14: ffff888058bea080 R15: ffff888055461480FS: 00007fbbcfe6f6c0(0000) GS:ffff8880d6d0a000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 000000110c3afcb0 CR3: 00000000382c7000 CR4: 0000000000352ef0Call Trace: __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:223 [inline] list_del_rcu include/linux/rculist.h:178 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:826 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:821 [inline] team_queue_override_port_prio_changed drivers/net/team/team_core.c:883 [inline] team_priority_option_set+0x171/0x2f0 drivers/net/team/team_core.c:1534 team_option_set drivers/net/team/team_core.c:376 [inline] team_nl_options_set_doit+0x8ae/0xe60 drivers/net/team/team_core.c:2653 genl_family_rcv_msg_doit+0x209/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2630 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2684 __sys_sendmsg+0x16d/0x220 net/socket.c:2716 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fThe problem is in this flow:1) Port is enabled, queue_id != 0, in qom_list2) Port gets disabled -> team_port_disable() -> team_queue_override_port_del() -> del (removed from list)3) Port is disabled, queue_id != 0, not in any list4) Priority changes -> team_queue_override_port_prio_changed() -> checks: port disabled && queue_id != 0 -> calls del - hits the BUG as it is removed alreadyTo fix this, change the check in team_queue_override_port_prio_changed()so it returns early if port is not enabled.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Free sp in error path to fix system crashSystem crash seen during load/unload test in a loop,[61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X.[61110.467494] =============================================================================[61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown()[61110.467501] -----------------------------------------------------------------------------[61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff)[61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1[61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023[61110.467515] Call Trace:[61110.467516] [61110.467519] dump_stack_lvl+0x34/0x48[61110.467526] slab_err.cold+0x53/0x67[61110.467534] __kmem_cache_shutdown+0x16e/0x320[61110.467540] kmem_cache_destroy+0x51/0x160[61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx][61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280[61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0[61110.467616] ? do_syscall_64+0x5c/0x90[61110.467619] ? exc_page_fault+0x62/0x150[61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd[61110.467626] [61110.467627] Disabling lock debugging due to kernel taint[61110.467635] Object 0x0000000026f7e6e6 @offset=16000[61110.467639] ------------[ cut here ]------------[61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx][61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160[61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1[61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023[61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160[61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89[61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282[61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027[61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0[61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7[61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000[61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000[61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000[61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0[61110.467736] PKRU: 55555554[61110.467737] Call Trace:[61110.467738] [61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx][61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280Free sp in the error path to fix the crash.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: Avoid creating sub-groups asynchronouslyThe asynchronous creation of sub-groups by a delayed work could lead to aNULL pointer dereference when the driver directory is removed before thework completes.The crash can be easily reproduced with the following commands: # cd /sys/kernel/config/pci_ep/functions/pci_epf_test # for i in {1..20}; do mkdir test && rmdir test; done BUG: kernel NULL pointer dereference, address: 0000000000000088 ... Call Trace: configfs_register_group+0x3d/0x190 pci_epf_cfs_work+0x41/0x110 process_one_work+0x18f/0x350 worker_thread+0x25a/0x3a0Fix this issue by using configfs_add_default_group() API which does nothave the deadlock problem as configfs_register_group() and does not requirethe delayed work handler.[mani: slightly reworded the description and added stable list]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Delay module unload while fabric scan in progressSystem crash seen during load/unload test in a loop.[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0[105954.384928] PKRU: 55555554[105954.384929] Call Trace:[105954.384931] [105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx][105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx][105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx][105954.384999] ? __wake_up_common+0x80/0x190[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx][105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx][105954.385040] ? __handle_irq_event_percpu+0x3d/0x190[105954.385044] ? handle_irq_event+0x58/0xb0[105954.385046] ? handle_edge_irq+0x93/0x240[105954.385050] ? __common_interrupt+0x41/0xa0[105954.385055] ? common_interrupt+0x3e/0xa0[105954.385060] ? asm_common_interrupt+0x22/0x40The root cause of this was that there was a free (dma_free_attrs) in theinterrupt context. There was a device discovery/fabric scan inprogress. A module unload was issued which set the UNLOADING flag. Aspart of the discovery, after receiving an interrupt a work queue wasscheduled (which involved a work to be queued). Since the UNLOADINGflag is set, the work item was not allocated and the mapped memory hadto be freed. The free occurred in interrupt context leading to systemcrash. Delay the driver unload until the fabric scan is complete toavoid the crash.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows-including extracting into a newly created directory without using the -P option do not mitigate the issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- tar > 0-0 (version in image is 1.34-150000.3.37.1).
Description: A flaw was found in GNU tar. When extracting an archive with the --one-top-level option, hardlink targets are not confined to the designated top-level directory and may resolve relative to the extraction working directory. A crafted archive can create hardlinks that escape the intended boundary and, when combined with a preexisting symbolic link under the working directory, may allow writing outside that boundary during a single extraction.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- tar > 0-0 (version in image is 1.34-150000.3.37.1).
Description: In the Linux kernel, the following vulnerability has been resolved:idpf: Fix RSS LUT NULL ptr issue after soft resetDuring soft reset, the RSS LUT is freed and not restored unless theinterface is up. If an ethtool command that accesses the rss lut isattempted immediately after reset, it will result in NULL ptrdereference. Also, there is no need to reset the rss lut if the soft resetdoes not involve queue count change.After soft reset, set the RSS LUT to default values based on the updatedqueue count only if the reset was a result of a queue count change andthe LUT was not configured by the user. In all other cases, don't touchthe LUT.Steps to reproduce:** Bring the interface down (if up)ifconfig eth1 down** update the queue count (eg., 27->20)ethtool -L eth1 combined 20** display the RSS LUTethtool -x eth1[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000[82375.558373] #PF: supervisor read access in kernel mode[82375.558391] #PF: error_code(0x0000) - not-present page[82375.558408] PGD 0 P4D 0[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf][82375.558786] Call Trace:[82375.558793] [82375.558804] rss_prepare.isra.0+0x187/0x2a0[82375.558827] rss_prepare_data+0x3a/0x50[82375.558845] ethnl_default_doit+0x13d/0x3e0[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180[82375.558886] genl_rcv_msg+0x1ad/0x2b0[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10[82375.558937] netlink_rcv_skb+0x58/0x100[82375.558957] genl_rcv+0x2c/0x50[82375.558971] netlink_unicast+0x289/0x3e0[82375.558988] netlink_sendmsg+0x215/0x440[82375.559005] __sys_sendto+0x234/0x240[82375.559555] __x64_sys_sendto+0x28/0x30[82375.560068] x64_sys_call+0x1909/0x1da0[82375.560576] do_syscall_64+0x7a/0xfa0[82375.561076] ? clear_bhb_loop+0x60/0xb0[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leakIn gs_can_open(), the URBs for USB-in transfers are allocated, added to theparent->rx_submitted anchor and submitted. In the complete callbackgs_usb_receive_bulk_callback(), the URB is processed and resubmitted. Ings_can_close() the URBs are freed by callingusb_kill_anchored_urbs(parent->rx_submitted).However, this does not take into account that the USB framework unanchorsthe URB before the complete function is called. This means that once anin-URB has been completed, it is no longer anchored and is ultimately notreleased in gs_can_close().Fix the memory leak by anchoring the URB in thegs_usb_receive_bulk_callback() to the parent->rx_submitted anchor.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: act_ife: avoid possible NULL dereftcf_ife_encode() must make sure ife_encode() does not return NULL.syzbot reported:Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTIKASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full)Call Trace: ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101 tcf_ife_encode net/sched/act_ife.c:841 [inline] tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877 tc_act include/net/tc_wrapper.h:130 [inline] tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152 tcf_exts_exec include/net/pkt_cls.h:349 [inline] mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1764 [inline] tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860 multiq_classify net/sched/sch_multiq.c:39 [inline] multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66 dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147 __dev_xmit_skb net/core/dev.c:4262 [inline] __dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_listWhen the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() isset to false, the driver may request the PMAC_ID from the firmware of thenetwork card, and this function will store that PMAC_ID at the providedaddress pmac_id. This is the contract of this function.However, there is a location within the driver where bothpmac_id_valid == false and pmac_id == NULL are being passed. This couldresult in dereferencing a NULL pointer.To resolve this issue, it is necessary to pass the address of a stubvariable to the function.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leakFix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:gs_usb_receive_bulk_callback(): fix URB memory leak").In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers areallocated, added to the priv->rx_submitted anchor and submitted. In thecomplete callback usb_8dev_read_bulk_callback(), the URBs are processed andresubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed bycalling usb_kill_anchored_urbs(&priv->rx_submitted).However, this does not take into account that the USB framework unanchorsthe URB before the complete function is called. This means that once anin-URB has been completed, it is no longer anchored and is ultimately notreleased in usb_kill_anchored_urbs().Fix the memory leak by anchoring the URB in theusb_8dev_read_bulk_callback() to the priv->rx_submitted anchor.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_removeOn APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 andih2 interrupt ring buffers are not initialized. This is by design, asthese secondary IH rings are only available on discrete GPUs. Seevega10_ih_sw_init() which explicitly skips ih1/ih2 initialization whenAMD_IS_APU is set.However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 toget the timestamp of the last interrupt entry. When retry faults areenabled on APUs (noretry=0), this function is called from the SVM pagefault recovery path, resulting in a NULL pointer dereference whenamdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000004 RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu] Call Trace: amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu] svm_range_restore_pages+0xae5/0x11c0 [amdgpu] amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu] gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu] amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu] amdgpu_ih_process+0x84/0x100 [amdgpu]This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HWIP 9.3.0 from noretry=1") which changed the default for Renoir APU fromnoretry=1 to noretry=0, enabling retry fault handling and thusexercising the buggy code path.Fix this by adding a check for ih1.ring_size before attempting to useit. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu:Rework retry fault removal"). This is needed if the hardware doesn'tsupport secondary HW IH rings.v2: additional updates (Alex)(cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ice: Fix NULL pointer dereference in ice_vsi_set_napi_queuesAdd NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashesduring resume from suspend when rings[q_idx]->q_vector is NULL.Tested adaptor:60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003]SR-IOV state: both disabled and enabled can reproduce this issue.kernel version: v6.18Reproduce steps:Boot up and execute suspend like systemctl suspend or rtcwake.Log:<1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040<1>[ 231.444052] #PF: supervisor read access in kernel mode<1>[ 231.444484] #PF: error_code(0x0000) - not-present page<6>[ 231.444913] PGD 0 P4D 0<4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI<4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170<4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89<4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202<4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010<4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000<4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000<4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001<4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000<4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000<4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033<4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0<4>[ 231.451629] PKRU: 55555554<4>[ 231.452076] Call Trace:<4>[ 231.452549] <4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice]<4>[ 231.453482] ice_resume+0xfd/0x220 [ice]<4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10<4>[ 231.454425] pci_pm_resume+0x8c/0x140<4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10<4>[ 231.455347] dpm_run_callback+0x5f/0x160<4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170<4>[ 231.456244] device_resume+0x177/0x270<4>[ 231.456708] dpm_resume+0x209/0x2f0<4>[ 231.457151] dpm_resume_end+0x15/0x30<4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0<4>[ 231.458054] enter_state+0x10e/0x570Add defensive checks for both the ring pointer and its q_vectorbefore dereferencing, allowing the system to resume successfully even whenq_vectors are unmapped.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: TC, delete flows only for existing peersWhen deleting TC steering flows, iterate only over actual devcompeers instead of assuming all possible ports exist. This avoidstouching non-existent peers and ensures cleanup is limited todevices the driver is currently connected to. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 133c8a067 P4D 0 Oops: Oops: 0002 [#1] SMP CPU: 19 UID: 0 PID: 2169 Comm: tc Not tainted 6.18.0+ #156 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0xbe/0x200 [mlx5_core] Code: 00 00 a8 08 74 a8 49 8b 46 18 f6 c4 02 74 9f 4c 8d bf a0 12 00 00 4c 89 ff e8 0e e7 96 e1 49 8b 44 24 08 49 8b 0c 24 4c 89 ff <48> 89 41 08 48 89 08 49 89 2c 24 49 89 5c 24 08 e8 7d ce 96 e1 49 RSP: 0018:ff11000143867528 EFLAGS: 00010246 RAX: 0000000000000000 RBX: dead000000000122 RCX: 0000000000000000 RDX: ff11000143691580 RSI: ff110001026e5000 RDI: ff11000106f3d2a0 RBP: dead000000000100 R08: 00000000000003fd R09: 0000000000000002 R10: ff11000101c75690 R11: ff1100085faea178 R12: ff11000115f0ae78 R13: 0000000000000000 R14: ff11000115f0a800 R15: ff11000106f3d2a0 FS: 00007f35236bf740(0000) GS:ff110008dc809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000157a01001 CR4: 0000000000373eb0 Call Trace: mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] mlx5e_flow_put+0x25/0x50 [mlx5_core] mlx5e_delete_flower+0x2a6/0x3e0 [mlx5_core] tc_setup_cb_reoffload+0x20/0x80 fl_reoffload+0x26f/0x2f0 [cls_flower] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] tcf_block_playback_offloads+0x9e/0x1c0 tcf_block_unbind+0x7b/0xd0 tcf_block_setup+0x186/0x1d0 tcf_block_offload_cmd.isra.0+0xef/0x130 tcf_block_offload_unbind+0x43/0x70 __tcf_block_put+0x85/0x160 ingress_destroy+0x32/0x110 [sch_ingress] __qdisc_destroy+0x44/0x100 qdisc_graft+0x22b/0x610 tc_get_qdisc+0x183/0x4d0 rtnetlink_rcv_msg+0x2d7/0x3d0 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x249/0x320 ? __alloc_skb+0x102/0x1f0 netlink_sendmsg+0x1e3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1ef/0x230 ? copy_msghdr_from_user+0x6c/0xa0 ___sys_sendmsg+0x7f/0xc0 ? ___sys_recvmsg+0x8a/0xc0 ? __sys_sendto+0x119/0x180 __sys_sendmsg+0x61/0xb0 do_syscall_64+0x55/0x640 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f35238bb764 Code: 15 b9 86 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d e5 08 0d 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffed4c35638 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a2efcc75e0 RCX: 00007f35238bb764 RDX: 0000000000000000 RSI: 00007ffed4c356a0 RDI: 0000000000000003 RBP: 00007ffed4c35710 R08: 0000000000000010 R09: 00007f3523984b20 R10: 0000000000000004 R11: 0000000000000202 R12: 00007ffed4c35790 R13: 000000006947df8f R14: 000055a2efcc75e0 R15: 00007ffed4c35780
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/pm: Disable MMIO access during SMU Mode 1 resetDuring Mode 1 reset, the ASIC undergoes a reset cycle and becomestemporarily inaccessible via PCIe. Any attempt to access MMIO registersduring this window (e.g., from interrupt handlers or other driver threads)can result in uncompleted PCIe transactions, leading to NMI panics orsystem hangs.To prevent this, set the `no_hw_access` flag to true immediately aftertriggering the reset. This signals other driver components to skipregister accesses while the device is offline.A memory barrier `smp_mb()` is added to ensure the flag update isglobally visible to all cores before the driver enters the sleep/waitstate.(cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: Fix recursive locking in __configfs_open_file()In flush_write_buffer, &p->frag_sem is acquired and then the loaded storefunction is called, which, here, is target_core_item_dbroot_store(). Thisfunction called filp_open(), following which these functions were called(in reverse order), according to the call trace: down_read __configfs_open_file do_dentry_open vfs_open do_open path_openat do_filp_open file_open_name filp_open target_core_item_dbroot_store flush_write_buffer configfs_write_itertarget_core_item_dbroot_store() tries to validate the new file path bytrying to open the file path provided to it; however, in this case, the bugreport shows:db_root: not a directory: /sys/kernel/config/target/dbrootindicating that the same configfs file was tried to be opened, on which itis currently working on. Thus, it is trying to acquire frag_sem semaphoreof the same file of which it already holds the semaphore obtained inflush_write_buffer(), leading to acquiring the semaphore in a nested mannerand a possibility of recursive locking.Fix this by modifying target_core_item_dbroot_store() to use kern_path()instead of filp_open() to avoid opening the file using filesystem-specificfunction __configfs_open_file(), and further modifying it to make this fixcompatible.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfnetlink_osf: validate individual option lengths in fingerprintsnfnl_osf_add_callback() validates opt_num bounds and stringNUL-termination but does not check individual option length fields.A zero-length option causes nf_osf_match_one() to enter the optionmatching loop even when foptsize sums to zero, which matches packetswith no TCP options where ctx->optp is NULL: Oops: general protection fault KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: nf_osf_match (net/netfilter/nfnetlink_osf.c:227) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:293) nf_hook_slow (net/netfilter/core.c:623) ip_local_deliver (net/ipv4/ip_input.c:262) ip_rcv (net/ipv4/ip_input.c:573)Additionally, an MSS option (kind=2) with length < 4 causesout-of-bounds reads when nf_osf_match_one() unconditionally accessesoptp[2] and optp[3] for MSS value extraction. While RFC 9293section 3.2 specifies that the MSS option is always exactly 4bytes (Kind=2, Length=4), the check uses "< 4" rather than"!= 4" because lengths greater than 4 do not cause memorysafety issues -- the buffer is guaranteed to be at leastfoptsize bytes by the ctx->optsize == foptsize check.Reject fingerprints where any option has zero length, or where an MSSoption has length less than 4, at add time rather than trusting thesevalues in the packet matching hot path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: conntrack: add missing netlink policy validationsHyunwoo Kim reports out-of-bounds access in sctp and ctnetlink.These attributes are used by the kernel without any validation.Extend the netlink policies accordingly.Quoting the reporter: nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE value directly to ct->proto.sctp.state without checking that it is within the valid range. [..] and: ... with exp->dir = 100, the access at ct->master->tuplehash[100] reads 5600 bytes past the start of a 320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by UBSAN.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: avoid overflows in ip6_datagram_send_ctl()Yiming Qian reported : I believe I found a locally triggerable kernel bug in the IPv6 sendmsg ancillary-data path that can panic the kernel via `skb_under_panic()` (local DoS). The core issue is a mismatch between: - a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type `__u16`) and - a pointer to the *last* provided destination-options header (`opt->dst1opt`) when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided. - `include/net/ipv6.h`: - `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible). (lines 291-307, especially 298) - `net/ipv6/datagram.c:ip6_datagram_send_ctl()`: - Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen` without rejecting duplicates. (lines 909-933) - `net/ipv6/ip6_output.c:__ip6_append_data()`: - Uses `opt->opt_flen + opt->opt_nflen` to compute header sizes/headroom decisions. (lines 1448-1466, especially 1463-1465) - `net/ipv6/ip6_output.c:__ip6_make_skb()`: - Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero. (lines 1930-1934) - `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`: - Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the pointed-to header). (lines 1179-1185 and 1206-1211) 1. `opt_flen` is a 16-bit accumulator: - `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`. 2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs and increments `opt_flen` each time: - In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`: - It computes `len = ((hdr->hdrlen + 1) << 3);` - It checks `CAP_NET_RAW` using `ns_capable(net->user_ns, CAP_NET_RAW)`. (line 922) - Then it does: - `opt->opt_flen += len;` (line 927) - `opt->dst1opt = hdr;` (line 928) There is no duplicate rejection here (unlike the legacy `IPV6_2292DSTOPTS` path which rejects duplicates at `net/ipv6/datagram.c:901-904`). If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps while `dst1opt` still points to a large (2048-byte) destination-options header. In the attached PoC (`poc.c`): - 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048` - 1 cmsg with `hdrlen=0` => `len = 8` - Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8` - The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header. 3. The transmit path sizes headers using the wrapped `opt_flen`:- In `net/ipv6/ip6_output.c:1463-1465`: - `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen + opt->opt_nflen : 0) + ...;` With wrapped `opt_flen`, `headersize`/headroom decisions underestimate what will be pushed later. 4. When building the final skb, the actual push length comes from `dst1opt` and is not limited by wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1930-1934`: - `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);` - In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes `dst1opt` via `ipv6_push_exthdr()`. - In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does: - `skb_push(skb, ipv6_optlen(opt));` - `memcpy(h, opt, ipv6_optlen(opt));` With insufficient headroom, `skb_push()` underflows and triggers `skb_under_panic()` -> `BUG()`: - `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`) - `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`) - The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`). - Root (or any task with `CAP_NET_RAW`) can trigger this without user namespaces. - An unprivileged `uid=1000` user can trigger this if unprivileged user namespaces are enabled and it can create a userns+netns to obtain namespaced `CAP_NET_RAW` (the attached PoC does this). - Local denial of service: kernel BUG/panic (system crash). ----truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()A malicious or compromised VIO server can return a num_written value in thediscover targets MAD response that exceeds max_targets. This value isstored directly in vhost->num_targets without validation, and is then usedas the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], whichis only allocated for max_targets entries. Indices at or beyond max_targetsaccess kernel memory outside the DMA-coherent allocation. Theout-of-bounds data is subsequently embedded in Implicit Logout and PLOGIMADs that are sent back to the VIO server, leaking kernel memory.Fix by clamping num_written to max_targets before storing it.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: macb: use the current queue number for statsThere's a potential mismatch between the memory reserved for statisticsand the amount of memory written.gem_get_sset_count() correctly computes the number of stats based on theactive queues, whereas gem_get_ethtool_stats() indiscriminately copiesdata using the maximum number of queues, and in the case the number ofactive queues is less than MACB_MAX_QUEUES, this results in a OOB writeas observed in the KASAN splat.==================================================================BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb]Write of size 760 at addr ffff80008080b000 by task ethtool/1027CPU: [...]Tainted: [E]=UNSIGNED_MODULEHardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0The buggy address belongs to the physical page:page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000page dumped because: kasan: bad access detectedMemory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8==================================================================Fix it by making sure the copied size only considers the active number ofqueues.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:af_key: validate families in pfkey_send_migrate()syzbot was able to trigger a crash in skb_put() [1]Issue is that pfkey_send_migrate() does not check old/new families,and that set_ipsecrequest() @family argument was truncated,thus possibly overfilling the skb.Validate families early, do not wait set_ipsecrequest().[1]skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev: kernel BUG at net/core/skbuff.c:214 !Call Trace: skb_over_panic net/core/skbuff.c:219 [inline] skb_put+0x159/0x210 net/core/skbuff.c:2655 skb_put_zero include/linux/skbuff.h:2788 [inline] set_ipsecrequest net/key/af_key.c:3532 [inline] pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636 km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848 xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705 xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:module: Fix kernel panic when a symbol st_shndx is out of boundsThe module loader doesn't check for bounds of the ELF section index insimplify_symbols(): for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) { const char *name = info->strtab + sym[i].st_name; switch (sym[i].st_shndx) { case SHN_COMMON: [...] default: /* Divert to percpu allocation if a percpu var. */ if (sym[i].st_shndx == info->index.pcpu) secbase = (unsigned long)mod_percpu(mod); else /** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr; sym[i].st_value += secbase; break; } }A symbol with an out-of-bounds st_shndx value, for example 0xffff(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic: BUG: unable to handle page fault for address: ... RIP: 0010:simplify_symbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exceptionThis can happen when module ELF is legitimately using SHN_XINDEX orwhen it is corrupted.Add a bounds check in simplify_symbols() to validate that st_shndx iswithin the valid range before using it.This issue was discovered due to a bug in llvm-objcopy, see relevantdiscussion for details [1].[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:seg6: separate dst_cache for input and output paths in seg6 lwtunnelThe seg6 lwtunnel uses a single dst_cache per encap route, sharedbetween seg6_input_core() and seg6_output_core(). These two pathscan perform the post-encap SID lookup in different routing contexts(e.g., ip rules matching on the ingress interface, or VRF tableseparation). Whichever path runs first populates the cache, and theother reuses it blindly, bypassing its own lookup.Fix this by splitting the cache into cache_input and cache_output,so each path maintains its own cached dst independently.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: xt_multiport: validate range encoding in checkentryports_match_v1() treats any non-zero pflags entry as the start of aport range and unconditionally consumes the next ports[] element asthe range end.The checkentry path currently validates protocol, flags and count, butit does not validate the range encoding itself. As a result, malformedrules can mark the last slot as a range start or place two range startsback to back, leaving ports_match_v1() to step past the last validports[] element while interpreting the rule.Reject malformed multiport v1 rules in checkentry by validating thateach range start has a following element and that the following elementis not itself marked as another range start.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:EDAC/mc: Fix error path ordering in edac_mc_alloc()When the mci->pvt_info allocation in edac_mc_alloc() fails, the error pathwill call put_device() which will end up calling the device's releasefunction.However, the init ordering is wrong such that device_initialize() happens*after* the failed allocation and thus the device itself and the releasefunction pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ...Reorder the calling sequence so that the device is initialized and thus therelease function pointer is properly set before it can be used.This was found by Claude while reviewing another EDAC patch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: reserve enough transaction items for qgroup ioctlsCurrently our qgroup ioctls don't reserve any space, they just do atransaction join, which does not reserve any space, neither for the quotatree updates nor for the delayed refs generated when updating the quotatree. The quota root uses the global block reserve, which is fine most ofthe time since we don't expect a lot of updates to the quota root, or tobe too close to -ENOSPC such that other critical metadata updates need toresort to the global reserve.However this is not optimal, as not reserving proper space may result in atransaction abort due to not reserving space for delayed refs and thenabusing the use of the global block reserve.For example, the following reproducer (which is unlikely to model anyreal world use case, but just to illustrate the problem), triggers such atransaction abort due to -ENOSPC when running delayed refs: $ cat test.sh #!/bin/bash DEV=/dev/nullb0 MNT=/mnt/nullb0 umount $DEV &> /dev/null # Limit device to 1G so that it's much faster to reproduce the issue. mkfs.btrfs -f -b 1G $DEV mount -o commit=600 $DEV $MNT fallocate -l 800M $MNT/filler btrfs quota enable $MNT for ((i = 1; i <= 400000; i++)); do btrfs qgroup create 1/$i $MNT done umount $MNTWhen running this, we can see in dmesg/syslog that a transaction aborthappened: [436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28 [436.493] ------------[ cut here ]------------ [436.494] BTRFS: Transaction aborted (error -28) [436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372 [436.497] Modules linked in: btrfs loop (...) [436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [436.510] Tainted: [W]=WARN [436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs] [436.514] Code: 0f 82 ea (...) [436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292 [436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001 [436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80 [436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867 [436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400 [436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000 [436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000 [436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0 [436.530] Call Trace: [436.530] [436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs] [436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs] [436.532] sync_filesystem+0x7a/0x90 [436.533] generic_shutdown_super+0x28/0x180 [436.533] kill_anon_super+0x12/0x40 [436.534] btrfs_kill_super+0x12/0x20 [btrfs] [436.534] deactivate_locked_super+0x2f/0xb0 [436.534] cleanup_mnt+0xea/0x180 [436.535] task_work_run+0x58/0xa0 [436.535] exit_to_user_mode_loop+0xed/0x480 [436.536] ? __x64_sys_umount+0x68/0x80 [436.536] do_syscall_64+0x2a5/0xf20 [436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e [436.537] RIP: 0033:0x7fe5906b6217 [436.538] Code: 0d 00 f7 (...) [436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217 [436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100 [436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff [436.544] R10: 0000000000000103 R11: ---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: jq is a command-line JSON processor. In 1.8.1 and earlier, jq accepts embedded NUL bytes in import paths at the jq-language level, but later resolves those paths through C string operations during module and data-file lookup. This creates a mismatch between the logical import string that policy or audit code may validate and the on-disk path that jq actually opens.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()In svs_enable_debug_write(), the buf allocated by memdup_user_nul()is leaked if kstrtoint() fails.Fix this by using __free(kfree) to automatically free buf, eliminatingthe need for explicit kfree() calls and preventing leaks.[Angelo: Added missing cleanup.h inclusion]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SVM: Add missing save/restore handling of LBR MSRsMSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated byKVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. Sosave/restore is completely broken.Fix it by adding the MSRs to msrs_to_save_base, and allowing writes toLBR MSRs from userspace only (as they are read-only MSRs) if LBRvirtualization is enabled. Additionally, to correctly restore L1's LBRswhile L2 is running, make sure the LBRs are copied from the capturedVMCB01 save area in svm_copy_vmrun_state().Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn'treported as an MSR to save/restore.Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM alreadyhandles unsupported reads and writes thanks to commit b5e2fec0ebc3 ("KVM:Ignore DEBUGCTL MSRs with no effect") (kvm_do_msr_access() will morph theunsupported userspace write into a nop).[sean: guard with lbrv checks, massage changelog]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ebtables: fix OOB read in compat_mtw_from_userLuxiao Xu says: The function compat_mtw_from_user() converts ebtables extensions from 32-bit user structures to kernel native structures. However, it lacks proper validation of the user-supplied match_size/target_size. When certain extensions are processed, the kernel-side translation logic may perform memory accesses based on the extension's expected size. If the user provides a size smaller than what the extension requires, it results in an out-of-bounds read as reported by KASAN. This fix introduces a check to ensure match_size is at least as large as the extension's required compatsize. This covers matches, watchers, and targets, while maintaining compatibility with standard targets.AFAIU this is relevant for matches that need to go thoughmatch->compat_from_user() call. Those that use plain memcpy with theuser-provided size are ok because the caller checks that size vs thestart of the next rule entry offset (which itself is checked vs. totalsize copied from userspace).The ->compat_from_user() callbacks assume they can read compatsize bytes,so they need this extra check.Based on an earlier patch from Luxiao Xu.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:af_unix: Drop all SCM attributes for SOCKMAP.SOCKMAP can hide inflight fd from AF_UNIX GC.When a socket in SOCKMAP receives skb with inflight fd,sk_psock_verdict_data_ready() looks up the mapped socket andenqueue skb to its psock->ingress_skb.Since neither the old nor the new GC can inspect the psockqueue, the hidden skb leaks the inflight sockets. Note thatthis cannot be detected via kmemleak because inflight socketsare linked to a global list.In addition, SOCKMAP redirect breaks the Tarjan-based GC'sassumption that unix_edge.successor is always alive, whichis no longer true once skb is redirected, resulting inuse-after-free below. [0]Moreover, SOCKMAP does not call scm_stat_del() properly,so unix_show_fdinfo() could report an incorrect fd count.sk_msg_recvmsg() does not support any SCM attributes in thefirst place.Let's drop all SCM attributes before passing skb to theSOCKMAP layer.[0]:BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)Read of size 8 at addr ffff888125362670 by task kworker/56:1/496CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014Workqueue: events sk_psock_backlogCall Trace: dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379) kasan_report (mm/kasan/report.c:597) unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) unix_destroy_fpl (net/unix/garbage.c:317) unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976) sk_psock_backlog (./include/linux/skbuff.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) Allocated by task 955: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) __kasan_slab_alloc (mm/kasan/common.c:369) kmem_cache_alloc_noprof (mm/slub.c:4539) sk_prot_alloc (net/core/sock.c:2240) sk_alloc (net/core/sock.c:2301) unix_create1 (net/unix/af_unix.c:1099) unix_create (net/unix/af_unix.c:1169) __sock_create (net/socket.c:1606) __sys_socketpair (net/socket.c:1811) __x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860) do_syscall_64 (arch/x86/entry/syscall_64.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)Freed by task 496: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kmem_cache_free (mm/slub.c:6165) __sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384) sk_psock_destroy (./include/net/sock.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nexthop: fix IPv6 route referencing IPv4 nexthopsyzbot reported a panic [1] [2].When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flagof all groups containing this nexthop is not updated. This is becausenh_group_v4_update is only called when replacing AF_INET to AF_INET6,but the reverse direction (AF_INET6 to AF_INET) is missed.This allows a stale has_v4=false to bypass fib6_check_nexthop, causingIPv6 routes to be attached to groups that effectively contain only AF_INETmembers. Subsequent route lookups then call nexthop_fib6_nh() whichreturns NULL for the AF_INET member, leading to a NULL pointerdereference.Fix by calling nh_group_v4_update whenever the family changes, not justAF_INET to AF_INET6.Reproducer: # AF_INET6 blackhole ip -6 nexthop add id 1 blackhole # group with has_v4=false ip nexthop add id 100 group 1 # replace with AF_INET (no -6), has_v4 stays false ip nexthop replace id 1 blackhole # pass stale has_v4 check ip -6 route add 2001:db8::/64 nhid 100 # panic ping -6 2001:db8::1[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: validate group add input before caching[BUG]OCFS2_IOC_GROUP_ADD can trigger a BUG_ON inocfs2_set_new_buffer_uptodate():kernel BUG at fs/ocfs2/uptodate.c:509!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTIRIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509Code: ffffe88f 42b9fe4c 89e64889 dfe8b4dfCall Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7eRIP: 0033:0x7bbfb55a966d[CAUSE]ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on auser-controlled group block before ocfs2_verify_group_and_input()validates that block number. That helper is only valid for newlyallocated metadata and asserts that the block is not already present inthe chosen metadata cache. The code also uses INODE_CACHE(inode) eventhough the group descriptor belongs to main_bm_inode and later journalaccesses use that cache context instead.[FIX]Validate the on-disk group descriptor before caching it, then add it tothe metadata cache tracked by INODE_CACHE(main_bm_inode). Keep thevalidation failure path separate from the later cleanup path so we onlyremove the buffer from that cache after it has actually been inserted.This keeps the group buffer lifetime consistent across validation,journaling, and cleanup.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:agp/amd64: Fix broken error propagation in agp_amd64_probe()A NULL pointer dereference was observed in the AMD64 AGP driver whenrunning in a virtualized environment (e.g. qemu/kvm) without a physicalAMD northbridge. The crash occurs in amd64_fetch_size() when attemptingto dereference the pointer returned by node_to_amd_nb(0).The root cause of this crash is broken error propagation inagp_amd64_probe(): When no AMD northbridges are found, cache_nbs()correctly returns -ENODEV. However, the probe function erroneouslychecks the return value against exactly -1, rather than < 0.As a result, the hardware absence error is masked, allowing the driverto improperly proceed with initialization. It eventually callsagp_add_bridge(), which invokes amd64_fetch_size(). Since the hardwaredoes not exist, node_to_amd_nb(0) returns NULL, leading to a GeneralProtection Fault (GPF) when accessing its ->misc member.Fix the issue by correcting the error check in agp_amd64_probe() toabort properly when cache_nbs() returns any negative error code. Thisprevents the driver from erroneously proceeding without hardware, therebyavoiding the subsequent NULL pointer dereference at its source.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack: destroy stale expectfn expectations on unregisterNAT helpers such as nf_nat_h323 store a raw pointer to module text inexp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()only unlinks the callback descriptor and never walks the expectation table,so an expectation pending at module removal survives with a danglingexp->expectfn into freed module text.When the expected connection arrives, init_conntrack() invokesexp->expectfn(), now a stale pointer into the unloaded module. Reproducedon a KASAN build by loading the H.323 helpers, creating a Q.931expectation, unloading nf_nat_h323, then connecting to the expected port: Oops: int3: 0000 [#1] SMP KASAN NOPTI RIP: 0010:0xffffffffa06102d1 init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862) nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049) ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223) nf_hook_slow (net/netfilter/core.c:619) __ip_local_out (net/ipv4/ip_output.c:120) __tcp_transmit_skb (net/ipv4/tcp_output.c:1715) tcp_connect (net/ipv4/tcp_output.c:4374) tcp_v4_connect (net/ipv4/tcp_ipv4.c:345) __sys_connect (net/socket.c:2167) Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]Reaching the dangling state requires CAP_SYS_MODULE in the initial usernamespace to remove a NAT helper that still has live expectations, so thisis a robustness fix; leaving an expectation pointing at freed text is wrongregardless.Add nf_ct_helper_expectfn_destroy(), which walks the expectation table anddrops every expectation whose ->expectfn matches the descriptor being torndown. Call it from each NAT helper's exit path after the existing RCU graceperiod, so no expectation outlives the code it points at and no extrasynchronize_rcu() is introduced. With the fix, the same reproducer runs tocompletion without the Oops.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/i915/gem: Fix phys BO pread/pwrite with offsetsg_page() returns struct page pointer not (void *) so the scalingof pread/pwrite is wrong for phys BO and wrong parts of BO would beaccessed if non-zero offset is used.Last impacted platform with overlay or cursor planes using physmapping was Gen3/945G/Lakeport.(cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: GNU coreutils unexpand is vulnerable to a heap-based buffer overflow due to an integer overflow during buffer allocation when processing large tab stop (-t) values. The multiplication used to calculate the allocation size can wrap around, resulting in an undersized buffer.When processing crafted input, subsequent writes exceed the allocated memory, leading to an out-of-bounds heap write.When running GNU coreutils unexpand with attacker-provided large tab stop (-t) arguments, this behavior leads to a crash and potentially achieve a heap write primitive depending on memory layout.This issue has been fixed in the commit b60a159fdc5bfcf9988d3a4cb6f53abe8ad5d35d
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- coreutils > 0-0 (version in image is 8.32-150400.9.12.1).
Description: A flaw was found in GLib. An out-of-bounds read of only 2 bytes can occur in the g_date_time_get_ymd function in the glib/gdatetime.c file when an invalid GDateTime object produced by the g_date_time_add_full function is processed. This flaw can corrupt the date output and potentially cause logic errors that may lead to a denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools < 2.78.6-150600.4.38.1 (version in image is 2.78.6-150600.4.35.1).
Description: A flaw was found in GLib. A buffer over-read can occur in the g_regex_replace function when used with the `G_REGEX_RAW` compile flag and case-change replacement escapes because the string_append function processes matched substrings using UTF-8 functions that assume valid UTF-8 input, even when the string is treated as raw bytes. This vulnerability can cause a minor information disclosure of 1-5 bytes and a denial of service when the buffer over-read crosses a page boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools < 2.78.6-150600.4.38.1 (version in image is 2.78.6-150600.4.35.1).
Description: A flaw was found in GLib. A buffer over-read can occur in g_io_channel_read_line_backend() in the giochannel.c file when a custom line terminator with a length greater than one is set, causing memcmp to read past the GString buffer. This vulnerability can cause a minor information disclosure of 7 bytes or a denial of service when the buffer over-read crosses a page boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools < 2.78.6-150600.4.38.1 (version in image is 2.78.6-150600.4.35.1).
Description: A flaw was found in GLib. An off-by-one error can occur in the g_key_file_get_locale_string_list function in the gkeyfile.c file when loading a key file with an empty value. This flaw can cause an out-of-bounds access of 1 byte or a denial of service when the out-of-bounds access crosses a page boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools < 2.78.6-150600.4.38.1 (version in image is 2.78.6-150600.4.35.1).
Description: In the Linux kernel, the following vulnerability has been resolved:block: Avoid mounting the bdev pseudo-filesystem in userspaceThe bdev pseudo-filesystem is an internal kernel filesystem with whichuserspace should not interfere. Unregister it so that userspace cannoteven attempt to mount it.This fixes a bug [1] that occurs when attempting to access files,because the system call move_mount() uses pointers declared in theinode_operations structure, which for the bdev pseudo-filesystemare always equal to 0. `inode->i_op = &empty_iops;`[1] BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 23380067 P4D 23380067 PUD 23381067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:0x0 Call Trace: lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460 open_last_lookups fs/namei.c:3550 [inline] path_openat+0x953/0x2700 fs/namei.c:3780 do_filp_open+0x1c5/0x410 fs/namei.c:3810 do_sys_openat2+0x171/0x4d0 fs/open.c:1318 do_sys_open fs/open.c:1334 [inline] __do_sys_openat fs/open.c:1350 [inline] __se_sys_openat fs/open.c:1345 [inline] __x64_sys_openat+0x13c/0x1f0 fs/open.c:1345 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/core: Prefer NLA_NUL_STRINGThese attributes are evaluated as c-string (passed to strcmp), butNLA_STRING doesn't check for the presence of a \0 terminator.Either this needs to switch to nla_strcmp() and needs to adjust printf fmtspecifier to not use plain %s, or this needs to use NLA_NUL_STRING.As the code has been this way for long time, it seems to me that userspacedoes include the terminating nul, even tough its not enforced so far, andthus NLA_NUL_STRING use is the simpler solution.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: ucsi: ccg: reject firmware images without a ':' record headerdo_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... }If the firmware image contains no ':' byte, strnchr() returns NULL.NULL compares less than the valid kernel pointer eof, so the loop bodyruns and strnchr() is called with p + 1 == (void *)1 and a length ofroughly (unsigned long)eof, causing a wonderful crash.The not_signed_fw fallthrough earlier in do_flash() and the chip-statebranches in ccg_fw_update_needed() allow an unsigned blob to reach thisloop, so a root user who can place a crafted file under /lib/firmwareand write the do_flash sysfs attribute can trigger the oops.Bail out with -EINVAL when the initial strnchr() returns NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ethtool: eeprom: add more safeties to EEPROM Netlink fallbackThe Netlink fallback path for reading module EEPROM(fallback_set_params()) validates that offset < eeprom_len,but does not check that offset + length stays within eeprom_len.The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) hasalways enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL;This could lead to surprises in both drivers and device FW.Add the missing offset + length validation to fallback_set_params(),mirroring the ioctl.Similarly - ethtool core in general, and ethtool_get_any_eeprom()in particular tries to zero-init all buffers passed to the driversto avoid any extra work of zeroing things out. eeprom_fallback()uses a plain kmalloc(), change it to zalloc.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peekedWhen sfb has children (eg qfq qdisc) whose peek() callback isqdisc_peek_dequeued(), we could get a kernel panic. When the parent of suchqdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb fromits child (sfb in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(sfb) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (sfb). And herein lies the problem. - sfb will call the child's dequeue() which will essentially just try to grab something of qfq's queue.[ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f][ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full)[ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011[ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq][ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b[ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216[ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000[ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0[ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3[ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000[ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000[ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000[ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0[ 127.598390][ T453] PKRU: 55555554[ 127.598509][ T453] Call Trace:[ 127.598629][ T453] [ 127.598718][ T453] ? mark_held_locks+0x40/0x70[ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5[ 127.599053][ T453] sfb_dequeue+0x88/0x4d0[ 127.599174][ T453] ? ktime_get+0x137/0x230[ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5[ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq][ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5[ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf][ 127.599988][ T453] __qdisc_run+0x169/0x1900The right thing to do in #1b is to grab the skb off gso_skb queue.This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()method instead.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: x_tables: add and use xtables_unregister_table_exitPrevious change added xtables_unregister_table_pre_exit to detach thetable from the packetpath and to unlink it from the active table list.In case of rmmod, userspace that is doing set/getsockopt for this tablewill not be able to re-instantiate the table: 1. The larval table has been removed already 2. existing instantiated table is no longer on the xt pernet table list.This adds the second stage helper:unlink the table from the dying list, free the hook ops (if any) and dothe audit notification. It replaces xt_unregister_table().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: isci: Fix use-after-free in device removal pathThe ISCI completion tasklet is initialized in isci_host_alloc()(drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacyinterrupt handlers (drivers/scsi/isci/host.c:223,613).isci_host_deinit() stops the controller and waits for stop completion,but it never kills completion_tasklet before teardown continues. Atop-of-function tasklet_kill() is not sufficient here: interrupts areonly disabled when isci_host_stop_complete() runs, so untilwait_for_stop() returns the IRQ handlers can still requeue thetasklet. The tasklet callback also re-enables interrupts after drainingcompletions, so killing the tasklet before the source is quiesced leavesthe same race open.Once wait_for_stop() returns, no further IRQ-driven scheduling canoccur. Kill completion_tasklet there so teardown cannot race a queuedtasklet running on a dead ihost. On remove or unload, the stale callbackcan otherwise dereference ihost and touch ihost->smu_registers after thehost lifetime ends.A UML + KASAN analogue reproduced the failure class both with notasklet_kill() and with tasklet_kill() placed before source quiesce, andstayed clean once the kill happened after quiescing the schedulingsource.This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free indevice removal path"), but ISCI needs the kill after wait_for_stop().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break()damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop withoutcalling mem_cgroup_iter_break(). This leaks the cgroup reference. Fixthe issue by calling mem_cgroup_iter_break() before the break.The issue was discovered [1] by Sashiko.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitializedWhen CONFIG_BPF_LSM=y is set, BPF inode storage maps(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,if the BPF LSM is not explicitly enabled at boot time (e.g. omittedfrom the "lsm=" boot parameter), lsm_prepare() is never executed forthe BPF LSM.Consequently, the BPF inode security blob offset(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains atits default compiled size of 8 bytes instead of being updated to avalid offset past the reserved struct rcu_head (typically 16 bytesor more).When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGEmap, bpf_inode() evaluates inode->i_security + 8. This erroneouslyaliases the struct rcu_head.func callback pointer at the beginningof the inode->i_security blob. During subsequent map element cleanupor inode destruction, writing NULL to owner_storage clears the queuedRCU callback pointer. When rcu_do_batch() later executes the queuedcallback, it attempts an instruction fetch at address 0x0, triggeringan immediate kernel panic.Fix this by introducing a global bpf_lsm_initialized boolean flagmarked with __ro_after_init. Set this flag to true inside bpf_lsm_init()when the LSM framework successfully registers the BPF LSM. Gate mapallocation in inode_storage_map_alloc() on this flag, returning-EOPNOTSUPP if the BPF LSM is in turn uninitialized.This fail-fast approach prevents userspace from allocating inodestorage maps when the supporting BPF LSM infrastructure is absent,avoiding zombie map states.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:module: decompress: check return value of module_extend_max_pages()module_extend_max_pages() calls kvrealloc() internally and returns-ENOMEM on allocation failure. The return value is never checked.If the initial allocation fails, info->pages remains NULL andinfo->max_pages remains 0. Subsequent calls to module_get_next_page()will attempt to dynamically grow the array by callingmodule_extend_max_pages(info, 0) since info->used_pages is 0. Thisresults in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treatedas a success, leading to a dereference of ZERO_SIZE_PTR and a kerneloops.Fix: add the missing error check after module_extend_max_pages() andreturn immediately on failure. This matches the pattern used by everyother kvrealloc() caller in the module loading path.[Sami: Corrected the analysis in the commit message.]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbersSyzbot reported a hung task in nilfs_transaction_begin() where multipletasks performing chmod() on a nilfs2 mount blocked for over 143 secondswaiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230The writer holding ns_segctor_sem was a concurrentNILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emittingper-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_clean_segments+0x3bd/0xa50 nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline] nilfs_ioctl+0x261f/0x2780The root cause is that user-supplied segment numbers are not validatedbefore nilfs_clean_segments() begins doing work; the range check oneach segnum is performed deep inside the call chain bynilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entrywhile still holding the segctor lock and the sufile mi_sem. Under load(repeated invocations across multiple mounts saturating the globalprintk path), the cumulative printk latency keeps ns_segctor_sem heldlong enough to trip the hung_task watchdog, blocking concurrentoperations such as chmod() that need ns_segctor_sem for read.Fix by validating the contents of kbufs[4] in nilfs_clean_segments()immediately after acquiring ns_segctor_sem via nilfs_transaction_lock().Holding ns_segctor_sem serializes the check againstnilfs_ioctl_resize(), which can modify ns_nsegments, so the validationuses a consistent value. Out-of-range segment numbers are rejectedwith -EINVAL before any segment-cleaning work begins, so the badentries never reach the per-element diagnostic path insidenilfs_sufile_updatev().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/damon/ops-common: handle extreme intervals in damon_hot_score()Fix three issues in damon_hot_score() that comes from wrong handling ofextreme (zero or too high) monitoring intervals user setup.When the user sets sampling interval zero, damon_max_nr_accesses(), whichis called from damon_hot_score(), causes a divide-by-zero. Needless tosay, it is a problem.When the user sets the aggregation interval zero, the function returnszero. It is wrong, since the real maximum nr_acceses in the setup shouldbe one. Worse yet, it can cause another divide-by-zero from its caller,damon_hot_score(), since it uses damon_max_nr_accesses() return value as adenominator.When the user sets the aggregation interval very high, damon_hot_score()could return a value out of [0, DAMOS_MAX_SCORE] range. Since the returnvalue is used as an index to the regions_score_histogram array, which isDAMOS_MAX_SCORE+1 size, it causes out of bounds array access.The issues can be relatively easily reproduced like below. The sysfswrite permission is required, though. # ./damo start --damos_action lru_prio --damos_quota_space 100M \ --damos_quota_interval 1s # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/monitoring_attrs/intervals/sample_us # echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us # echo commit > state # dmesg [...] [ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI [...] [ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0 [...]Fix the divide-by-zero intervals problems by explicitly handling the zerointervals in damon_max_nr_accesses(). Fix the out-of-bound array accessby applying [0, DAMOS_MAX_SCORE] bounds before returning fromdamon_hot_score().The issue was discovered [1] by Sashiko.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bridge: cfm: reject invalid CCM interval at configuration timeccm_tx_work_expired() re-arms itself via queue_delayed_work() usingthe configured exp_interval converted by interval_to_us(). Whenexp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,interval_to_us() returns 0, causing the worker to fire immediately ina tight loop that allocates skbs until OOM.Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contentspefile_digest_pe_contents() computes the trailing-data hash length aspelen - (hashed_bytes + certs_size). A crafted PE can make the additionexceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.This is passed to crypto_shash_update() which reads out of bounds andpanics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exceptionValidate that the addition does not overflow and the result does notexceed pelen before the subtraction. Return -ELIBBAD on failure.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: core: fix NULL-deref on adapter registration failureIf adapter registration ever fails the release callback would trigger aNULL-pointer dereference as the completion struct has not beeninitialised.Note that before the offending commit this would instead have resultedin a minor memory leak of the adapter name.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A malicious client acting as the receiver of an rsync file transfer can trigger an out of bounds read of a heap based buffer, via a negative array index. The malicious rsync client requires at least read access to the remote rsync module in order to trigger the issue.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- rsync > 0-0 (version in image is 3.2.7-150600.3.21.1).
Description: When building nested elements using xml.dom.minidom methods such as appendChild() that have a dependency on _clear_id_cache() the algorithm is quadratic. Availability can be impacted when building excessively nested documents.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: In sshd in OpenSSH before 10.0, the DisableForwarding directive does not adhere to the documentation stating that it disables X11 and agent forwarding.
Packages affected:
- sle-module-desktop-applications-release == 15.6 (version in image is 15.6-150600.37.2).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: An information disclosure issue in the zipfileInflate function in the zipfile extension in SQLite v3.51.1 and earlier allows attackers to obtain heap memory via supplying a crafted ZIP file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libsqlite3-0 > 0-0 (version in image is 3.51.3-150000.3.39.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dpaa2-switch: add bounds check for if_id in IRQ handlerThe IRQ handler extracts if_id from the upper 16 bits of the hardwarestatus register and uses it to index into ethsw->ports[] withoutvalidation. Since if_id can be any 16-bit value (0-65535) but the portsarray is only allocated with sw_attr.num_ifs elements, this can lead toan out-of-bounds read potentially.Add a bounds check before accessing the array, consistent with theexisting validation in dpaa2_switch_rx().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dpaa2-switch: prevent ZERO_SIZE_PTR dereference when num_ifs is zeroThe driver allocates arrays for ports, FDBs, and filter blocks usingkcalloc() with ethsw->sw_attr.num_ifs as the element count. When thedevice reports zero interfaces (either due to hardware configurationor firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)instead of NULL.Later in dpaa2_switch_probe(), the NAPI initialization unconditionallyaccesses ethsw->ports[0]->netdev, which attempts to dereferenceZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.Add a check to ensure num_ifs is greater than zero after retrievingdevice attributes. This prevents the zero-sized allocations andsubsequent invalid pointer dereference.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before accessl2cap_information_rsp() checks that cmd_len covers the fixedl2cap_info_rsp header (type + result, 4 bytes) but then readsrsp->data without verifying that the payload is present: - L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads 4 bytes past the header (needs cmd_len >= 8). - L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header (needs cmd_len >= 5).A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers anout-of-bounds read of adjacent skb data.Guard each data access with the required payload length check. If thepayload is too short, skip the read and let the state machine completewith safe defaults (feat_mask and remote_fixed_chan remain zero fromkzalloc), so the info timer cleanup and l2cap_conn_start() still runand the connection is not stalled.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bridge: br_nd_send: linearize skb before parsing ND optionsbr_nd_send() parses neighbour discovery options from ns->opt[] andassumes that these options are in the linear part of request.Its callers only guarantee that the ICMPv6 header and target addressare available, so the option area can still be non-linear. Parsingns->opt[] in that case can access data past the linear buffer.Linearize request before option parsing and derive ns from the linearnetwork header.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:rnbd-srv: Zero the rsp buffer before using itBefore using the data buffer to send back the response message, zero itcompletely. This prevents any stray bytes to be picked up by the clientside when there the message is exchanged between different protocolversions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: pvrusb2: fix URB leak in pvr2_send_request_exWhen pvr2_send_request_ex() submits a write URB successfully but fails tosubmit the read URB (e.g. returns -ENOMEM), it returns immediately withoutwaiting for the write URB to complete. Since the driver reuses the sameURB structure, a subsequent call to pvr2_send_request_ex() attempts tosubmit the still-active write URB, triggering a 'URB submitted whileactive' warning in usb_submit_urb().Fix this by ensuring the write URB is unlinked and waited upon if the readURB submission fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath5k: do not access array OOBVincent reports:> The ath5k driver seems to do an array-index-out-of-bounds access as> shown by the UBSAN kernel message:> UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20> index 4 is out of range for type 'ieee80211_tx_rate [4]'> ...> Call Trace:> > dump_stack_lvl+0x5d/0x80> ubsan_epilogue+0x5/0x2b> __ubsan_handle_out_of_bounds.cold+0x46/0x4b> ath5k_tasklet_tx+0x4e0/0x560 [ath5k]> tasklet_action_common+0xb5/0x1c0It is real. 'ts->ts_final_idx' can be 3 on 5212, so: info->status.rates[ts->ts_final_idx + 1].idx = -1;with the array defined as: struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];while the size is: #define IEEE80211_TX_MAX_RATES 4is indeed bogus.Set this 'idx = -1' sentinel only if the array index is less than thearray size. As mac80211 will not look at rates beyond the size(IEEE80211_TX_MAX_RATES).Note: The effect of the OOB write is negligible. It just overwrites thenext member of info->status, i.e. ack_signal.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSEFSCTL_SET_SPARSE in fsctl_set_sparse() modifies the file's sparseattribute and saves it through xattr without any permission checks.This exposes two issues:1) A client on a read-only share can change the sparse attribute on files it opened, even though the share is read-only. Other FSCTL write operations already check test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE), but FSCTL_SET_SPARSE does not.2) Even on writable shares, clients without FILE_WRITE_DATA or FILE_WRITE_ATTRIBUTES access should not modify the sparse attribute. Similar handle-level checks exist in other functions but are missing here.Add both share-level writable check and per-handle access check.Use goto out on error to avoid leaking file references.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scansThe USB MIDI 2.0 endpoint parser has the same descriptor walkingpattern as the legacy MIDI parser. It validates bLength againstbNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against theremaining bytes in the endpoint-extra scan.A malformed device can therefore make later baAssoGrpTrmBlkID[] readsconsume bytes past the walked descriptor.Reject zero-length and overlong descriptors while walking endpointextras.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsignet/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDRsignaling packets up to the channel MTU and dispatches each commandwithout enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peerwithin radio range can send a fixed-channel CID 0x0001 packet that islarger than MTUsig and contains many L2CAP_ECHO_REQ commands beforepairing. In a real-radio stock-kernel run, one 681-byte signalingpacket containing 168 zero-length ECHO_REQ commands made the targettransmit 168 ECHO_RSP frames over about 220 ms.Impact: a Bluetooth BR/EDR peer within radio range, before pairing, canforce 168 ECHO_RSP frames from one 681-byte fixed-channel signalingpacket containing packed ECHO_REQ commands.Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes andreject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSPcarrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.The Bluetooth Core spec wording for MTUExceeded says the rejectidentifier shall match the first request command in the packet, andthat packets containing only responses shall be silently discarded.Linux intentionally deviates from that prescription: silentlydiscarding desynchronizes the peer because the remote stack neverlearns its responses were dropped, and locating the first requestcommand requires walking command headers past MTUsig, i.e. processingbytes from a packet we have already decided is too large to process.We therefore always emit one reject and use the identifier from thefirst command header, a single fixed-offset byte read.The unrestricted BR/EDR signaling parser and ECHO_REQ response path bothtrace to the initial git import; no later introducing commit isavailable for a Fixes tag.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in libssh. If data packets are processed after a channel is closed, channel data callbacks can be invoked after the associated data has already been freed, leading to crashes or possible use-after-free conditions.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config < 0.9.8-150600.11.15.1 (version in image is 0.9.8-150600.11.12.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: garp: fix unsigned integer underflow in garp_pdu_parse_attrThe receive-side GARP attribute parser computes dlen with reversedoperands: dlen = sizeof(*ga) - ga->len;ga->len is the on-wire attribute length and includes the GARP attributeheader. For normal attributes with data, ga->len is larger thansizeof(*ga), so the subtraction underflows in unsigned arithmetic.The resulting value is later passed to garp_attr_lookup(), whose lengthargument is u8. After truncation, the parsed data length usually nolonger matches the length stored for locally registered attributes, soreceived Join/Leave events are ignored. This breaks the GARP receive pathfor common attributes, such as GVRP VLAN registration attributes.Compute the data length as the attribute length minus the header length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: HIDP: fix missing length checks in hidp_input_report()hidp_input_report() reads keyboard and mouse payload data from an skbwithout first verifying that skb->len contains enough data.hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatchingto hidp_input_report(). If a paired device sends a truncated packet,the handler reads beyond the valid skb data, resulting in anout-of-bounds read of skb data. The OOB bytes may be interpreted asphantom key presses or spurious mouse movement.Replace the open-coded length tracking and pointer arithmetic withskb_pull_data() calls. skb_pull_data() returns NULL if the requestedbytes are not present, eliminating the need for a manual size variableand the separate skb->len guard.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()before scheduling the delayed work. The normal path inl2cap_chan_timeout() drops this reference with l2cap_chan_put() at theend, but the early return when chan->conn is NULL skips the put,leaking the reference.Add the missing l2cap_chan_put() before the early return.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: tt: avoid empty VLAN responsesThe commit 16116dac2339 ("batman-adv: prevent TT request storms by notsending inconsistent TT TLVLs") added checks to the local (direct) TTresponse code. But the response can also be done indirectly by another nodeusing the global TT state. To avoid such inconsistency states reported inthe original fix, also avoid sending empty VLANs for replies from theglobal TT state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: advance loop vars in cfg80211_merge_profile()cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSSprofile that has been split across multiple consecutive MBSSID elements.Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)but never advances mbssid_elem or sub_elem inside the body. Eachiteration therefore searches for a continuation that follows the samefixed pair; the helper returns the same next_mbssid; and the samenext_sub bytes are memcpy()'d into merged_ie at a growing offset untilthe buffer fills.Advance both mbssid_elem and sub_elem to the just-consumed continuationso the next call to cfg80211_get_profile_continuation() searches for afurther continuation beyond it (or returns NULL when none exists).A specially-crafted malicious beacon can take advantage of this bugto cause the kernel to spend an excessive amount of time incfg80211_merge_profile (up to as much as 2ms per beacon received),which could theoretically be abused in some way.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: validate option length before reading conf opt valuel2cap_get_conf_opt() derives the option length from theattacker-controlled opt->len field and immediately dereferencesopt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or araw pointer for the default case) before any caller has confirmedthat opt->len bytes are present in the buffer. The callers(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() andl2cap_conf_rfc_get()) only detect a malformed option afterwards, oncethe running length has gone negative, by which point theout-of-bounds read has already executed.An existing post-hoc length check keeps the garbage value from beingconsumed, so this is not a data leak in the current control flow. Itis still a validate-after-use ordering bug: up to 4 bytes are readpast the end of the buffer before it is known to contain them, and itis fragile to future changes in the callers.Fix it at the source. Pass the end of the buffer intol2cap_get_conf_opt() and refuse to touch opt->val unless the fulloption (header + value) fits. Each caller computes an end pointeronce before the loop and checks the return value directly instead ofinferring the error from a negative length.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Bluetooth LE and BR/EDR Secure Connections pairing and Secure Simple Pairing using the Passkey entry protocol in Bluetooth Core Specifications 2.1 through 5.3 may permit an unauthenticated man-in-the-middle attacker to identify the Passkey used during pairing by reflection of a crafted public key with the same X coordinate as the offered public key and by reflection of the authentication evidence of the initiating device, potentially permitting this attacker to complete authenticated pairing with the responding device using the correct Passkey for the pairing session. This is a related issue to CVE-2020-26558.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: pip would incorrectly handle doubly-encoded package URLs from indexes allowing for files to be installed to arbitrary locations on disk even when installing wheels.This vulnerability requires downloading or installing a package from a malicious package index to succeed, malicious packages alone are not able to exploit this vulnerability. Note that this vulnerability only materially impacts users running `pip download` with the `--only-binary` option as installing source distributions from an untrusted index is already an unsafe operation that executes code during install time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: Issue summary: The CMS_decrypt and PKCS7_decrypt functions are vulnerable toBleichenbacher-style attack when an attacker is able to provide the CMS orS/MIME messages and observe the error code and/or decryption output.Impact summary: The Bleichenbacher-style attack allows an attacker to use thevictim's vulnerable application as a way to decrypt or sign messages with thevictim's private RSA key.The attack is possible in 2 variants.1. The decryption API (CMS_decrypt(), PKCS7_decrypt()) is used withoutproviding the recipient certificate. In this case OpenSSL iterates over everyKeyTransRecipientInfo (KTRI) without stopping at the first success.An attacker who authors a message with two KTRI entries - the first onewrapping a real CEK under the victim's public key, the second with anarbitrary probe ciphertext - obtains opportunity to iterate the 2nd KTRI toget a valid PKCS#1 v1.5 padding if the error code of the application isavailable.That is a Bleichenbacher oracle (Bleichenbacher, CRYPTO '98): anadaptive-chosen-ciphertext side channel from which the attacker decrypts anyRSA ciphertext to the victim's key or forges any PKCS#1 v1.5 signature underit.2. When the decryption API (CMS_decrypt(), PKCS7_decrypt()) is provided withthe recipient certificate, and the recipient is not found, a randomkey is substituted.An attacker who authors a message and is able to compare both error code andthe result of the decryption, can mount a Bleichenbacher oracle.We are not aware of any applications that provide a remote attackeran opportunity to mount an attack described in these scenarios. We considerthe existence of such application very unlikely, and for this reason thisCVE has been evaluated as Low severity.To avoid these attacks, when RSA PKCS#1 v1.5 Key Transport is in use, theinvoked EVP_PKEY_decrypt() will use the implicit rejection mechanism describedin draft-irtf-cfrg-rsa-guidance. In previous OpenSSL releases the implicitrejection was explicitly disabled.The implicit rejection mechanism always returns a plaintext value,the symmetric key. This result is deterministic for the ciphertext and theprivate key. The length of the decryption result can happen to match thelength of the key of the symmetric cipher that was used for the contentencryption. When a certificate is not provided, the last RecipientInfoproducing a key that looks valid will be used. It may cause getting garbagecontent on decryption. As a proper way to deal with this a recipientcertificate has to be provided to identify the particular RecipientInfo fordecryption.The FIPS modules in 4.0, 3.6, 3.5, and 3.4 are not affected by this issue, asCMS and S/MIME processing happens outside the OpenSSL FIPS module boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libopenssl3 > 0-0 (version in image is 3.1.4-150600.5.53.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handlingThe `tpg->tpg_nexus` pointer in the USB Target driver is dynamicallymanaged and tied to userspace configuration via ConfigFS. It can beNULL if the USB host sends requests before the nexus is fullyestablished or immediately after it is dropped.Currently, functions like `bot_submit_command()` and the datatransfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediatelydereference `tv_nexus->tvn_se_sess` without any validation. If amalicious or misconfigured USB host sends a BOT (Bulk-Only Transport)command during this race window, it triggers a NULL pointerdereference, leading to a kernel panic (local DoS).This exposes an inconsistent API usage within the module, as peerfunctions like `usbg_submit_command()` and `bot_send_bad_response()`correctly implement a NULL check for `tv_nexus` before proceeding.Fix this by bringing consistency to the nexus handling. Add themissing `if (!tv_nexus)` checks to the vulnerable BOT command andrequest processing paths, aborting the command gracefully with anerror instead of crashing the system.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: sftp in OpenSSH before 10.4 does not properly constrain the location of downloaded files when "sftp server:/path ." is used with an attacker-controlled server.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: scp in OpenSSH before 10.4 may place a file in the parent directory of an intended directory when the copy occurs between two remote destinations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: internal-sftp in sshd in OpenSSH before 10.4 recognizes only the first 9 command-line arguments, which can be important if a later command-line argument would have helped to ensure the intended security properties of an SFTP connection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queuesWhile a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will notset the requeue list for a requeued command to be kicked in the future.The expectation is a call to scsi_run_host_queues() will kick all SCSIdevices once the recovery state is cleared.However, scsi_run_host_queues() uses shost_for_each_device() which usesscsi_device_get() and so will ignore devices in a partially removedstate like SDEV_CANCEL. But these devices may also have requeuedrequests, leaving their requests stuck from not being kicked and causingthe removal process of the device to hang.scsi_run_host_queues() needs to run against more devices than the macroshost_for_each_device() allows. Instead of using the too limitingscsi_device_get() state checks, only ignore devices in SDEV_DEL state orwhen unable to acquire a reference. Attempt to run the queues for allother devices when scsi_run_host_queues() is called.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: avoid kobject path lookup in DualSense matchThe DualSense jack-detection input handler verifies that a matching inputdevice belongs to the same physical controller by building kobject pathstrings for both the input device and the USB audio device, then comparingthe path prefix.This was observed when a weak physical connection caused the controllerto rapidly disconnect and reconnect. During that repeated hotplug,snd_dualsense_ih_match() can run while the controller's USB device isbeing disconnected. kobject_get_path() walks ancestor kobjects anddereferences their names; if the USB device kobject name is no longervalid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation]The same ownership check can be done without building kobject pathstrings. The input device is parented below the HID device, USB interfaceand USB device, so walking the input device parent chain and comparingagainst the mixer USB device preserves the check without dereferencingkobject names during disconnect.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: libcurl might in some circumstances reuse the wrong connection when asked todo Negotiate-authenticated ones, even when they are set to use different'services'.libcurl features a pool of recent connections so that subsequent requests canreuse an existing connection to avoid overhead.When reusing a connection a range of criteria must be met. Due to a logicalerror in the code, a request that was issued by an application couldwrongfully reuse an existing connection to the same server that wasauthenticated using different services.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl < 8.14.1-150600.4.46.1 (version in image is 8.14.1-150600.4.43.1).
Description: Insufficient checks of the RMP on host buffer access in IOMMU may allow an attacker with privileges and a compromised hypervisor to trigger an out of bounds condition without RMP checks, resulting in a potential loss of confidential guest integrity.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'Writing 'power' and 'submit_queues' concurrently will trigger kernelpanic:Test script:modprobe null_blk nr_devices=0mkdir -p /sys/kernel/config/nullb/nullb0while true; do echo 1 > submit_queues; echo 4 > submit_queues; done &while true; do echo 1 > power; echo 0 > power; doneTest result:BUG: kernel NULL pointer dereference, address: 0000000000000148Oops: 0000 [#1] PREEMPT SMPRIP: 0010:__lock_acquire+0x41d/0x28f0Call Trace: lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150This is because del_gendisk() can concurrent withblk_mq_update_nr_hw_queues():nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULLFix this problem by resuing the global mutex to protectnullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queueWhen the task management thread processes reply queues while the resetthread resets them, the task management thread accesses an invalid queue ID(0xFFFF), set by the reset thread, which points to unallocated memory,causing a crash.Add flag 'io_admin_reset_sync' to synchronize access between the reset,I/O, and admin threads. Before a reset, the reset handler sets this flag toblock I/O and admin processing threads. If any thread bypasses the initialcheck, the reset thread waits up to 10 seconds for processing to finish. Ifthe wait exceeds 10 seconds, the controller is marked as unrecoverable.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0and sctp_ulpevent_make_authkey() returns 0, then the variableai_ev remains zero and the zero will be dereferencedin the sctp_ulpevent_free() function.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix invalid prog->stats access when update_effective_progs failsSyzkaller triggers an invalid memory access issue following faultinjection in update_effective_progs. The issue can be described asfollows:__cgroup_bpf_detach update_effective_progs compute_effective_progs bpf_prog_array_alloc <-- fault inject purge_effective_progs /* change to dummy_bpf_prog */ array->items[index] = &dummy_bpf_prog.prog---softirq start---__do_softirq ... __cgroup_bpf_run_filter_skb __bpf_prog_run_save_cb bpf_prog_run stats = this_cpu_ptr(prog->stats) /* invalid memory access */ flags = u64_stats_update_begin_irqsave(&stats->syncp)---softirq end--- static_branch_dec(&cgroup_bpf_enabled_key[atype])The reason is that fault injection caused update_effective_progs to failand then changed the original prog into dummy_bpf_prog.prog inpurge_effective_progs. Then a softirq came, and accessing the members ofdummy_bpf_prog.prog in the softirq triggers invalid mem access.To fix it, skip updating stats when stats is NULL.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_writeA deadlock can occur between nfc_unregister_device() and rfkill_fop_write()due to lock ordering inversion between device_lock and rfkill_global_mutex.The problematic lock order is:Thread A (rfkill_fop_write): rfkill_fop_write() mutex_lock(&rfkill_global_mutex) rfkill_set_block() nfc_rfkill_set_block() nfc_dev_down() device_lock(&dev->dev) <- waits for device_lockThread B (nfc_unregister_device): nfc_unregister_device() device_lock(&dev->dev) rfkill_unregister() mutex_lock(&rfkill_global_mutex) <- waits for rfkill_global_mutexThis creates a classic ABBA deadlock scenario.Fix this by moving rfkill_unregister() and rfkill_destroy() outside thedevice_lock critical section. Store the rfkill pointer in a local variablebefore releasing the lock, then call rfkill_unregister() after releasingdevice_lock.This change is safe because rfkill_fop_write() holds rfkill_global_mutexwhile calling the rfkill callbacks, and rfkill_unregister() also acquiresrfkill_global_mutex before cleanup. Therefore, rfkill_unregister() willwait for any ongoing callback to complete before proceeding, anddevice_del() is only called after rfkill_unregister() returns, preventingany use-after-free.The similar lock ordering in nfc_register_device() (device_lock ->rfkill_global_mutex via rfkill_register) is safe because duringregistration the device is not yet in rfkill_list, so no concurrentrfkill operations can occur on this device.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entryEndpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-Xinterrupt to the host using a writel(), which generates a PCI posted writetransaction. There's no completion for posted writes, so the writel() mayreturn before the PCI write completes. dw_pcie_ep_raise_msix_irq() alsounmaps the outbound ATU entry used for the PCI write, so the write raceswith the unmap.If the PCI write loses the race with the ATU unmap, the write may corrupthost memory or cause IOMMU errors, e.g., these when running fio with alarger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0Flush the write by performing a readl() of the same address to ensure thatthe write has reached the destination before the ATU entry is unmapped.The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but thereit was solved by dedicating an outbound iATU only for MSI. We can't do thesame for MSI-X because each vector can have a different msg_addr and themsg_addr may be changed while the vector is masked.[bhelgaas: commit log]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:spi: fix use-after-free on controller registration failureMake sure to deregister from driver core also in the unlikely event thatper-cpu statistics allocation fails during controller registration toavoid use-after-free (of driver resources) and unclocked registeraccesses.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: omap: do not register driver in probe()Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers theomap_mpuio_driver from omap_mpuio_init(), which is called fromomap_gpio_probe().However, it neither makes sense to register drivers from probe()callbacks of other drivers, nor does the driver core allow registeringdrivers with a device lock already being held.The latter was revealed by commit dc23806a7c47 ("driver core: enforcedevice_lock for driver_match_device()") leading to a potential deadlockcondition described in [1].Additionally, the omap_mpuio_driver is never unregistered from thedriver core, even if the module is unloaded.Hence, register the omap_mpuio_driver from the module initcall andunregister it in module_exit().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix iloc.bh leak in ext4_fc_replay_inode() error pathsDuring code review, Joseph found that ext4_fc_replay_inode() callsext4_get_fc_inode_loc() to get the inode location, which holds areference to iloc.bh that must be released via brelse().However, several error paths jump to the 'out' label withoutreleasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failureFix this by introducing an 'out_brelse' label placed just beforethe existing 'out' label to ensure iloc.bh is always released.Additionally, make ext4_fc_replay_inode() propagate errorsproperly instead of always returning 0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: cx25821: Fix a resource leak in cx25821_dev_setup()Add release_mem_region() if ioremap() fails to release the memoryregion obtained by cx25821_get_resources().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:eventfs: Hold eventfs_mutex and SRCU when remount walks eventsCommit 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from theevents descriptor") had eventfs_set_attrs() recurse through ei->childrenon remount. The walk only holds the rcu_read_lock() taken bytracefs_apply_options() over tracefs_inodes, which is wrong: - list_for_each_entry over ei->children races with the list_del_rcu() in eventfs_remove_rec() -- LIST_POISON1 deref, same shape as d2603279c7d6. - eventfs_inodes are freed via call_srcu(&eventfs_srcu, ...). rcu_read_lock() does not extend an SRCU grace period, so ti->private can be reclaimed under the walk. - The writes to ei->attr race with eventfs_set_attr(), which holds eventfs_mutex.Reproducer: while :; do mount -o remount,uid=$((RANDOM%1000)) /sys/kernel/tracing; done & while :; do echo "p:kp submit_bio" > /sys/kernel/tracing/kprobe_events echo > /sys/kernel/tracing/kprobe_events doneWrap the events portion of tracefs_apply_options() ineventfs_remount_lock()/_unlock() that take eventfs_mutex andsrcu_read_lock(&eventfs_srcu). eventfs_set_attrs() doesn't sleep so thenested rcu_read_lock() is fine; lockdep_assert_held() pins the contract.Comment in tracefs_drop_inode() said "RCU cycle" -- it is SRCU.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix zero-size GDS range init on RDNA4RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memoryresources. The gfx_v12_0 initialisation code correctly leavesadev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size atzero to reflect this.amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() foreach of these resources regardless of size. When the size is zero,amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately firesDRM_MM_BUG_ON(start + size <= start) -- trivially true when size iszero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.Guard against this by returning 0 early fromamdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTMresource manager registration for hardware resources that are absent,without affecting any other GPU type.DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled inthe kernel config. This is apparently rarely enabled as these chipshave been in the market for over a year and this issue was only reportednow.Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dm: fix a buffer overflow in ioctl processingTony Asleson (using Claude) found a buffer overflow in dm-ioctl in thefunction retrieve_status:1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr);3. The alignment doesn't check overflow, so outptr could point past the buffer end4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf);5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number6. With "remaining" being high, the code writes more data past the end of the bufferLuckily, this bug has no security implications because:1. Only root can issue device mapper ioctls2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentally
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix use-after-free in offloaded map/prog info fillWhen querying info for an offloaded BPF map or program,bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()obtain the network namespace with get_net(dev_net(offmap->netdev)).However, the associated netdev's netns may be racing with teardownduring netns destruction. If the netns refcount has already reached 0,get_net() performs a refcount_t increment on 0, triggering: refcount_t: addition on 0; use-after-free.Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remainsvalid, they cannot prevent the netns refcount from reaching zero.Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()uses refcount_inc_not_zero() and returns NULL if the refcount is alreadyzero, which causes ns_get_path_cb() to fail and the caller to return-ENOENT -- the correct behavior when the netns is being destroyed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:misc: fastrpc: Fix NULL pointer dereference in rpmsg callbackA NULL pointer dereference was observed on Hawi at boot when the DSPsends a glink message before fastrpc_rpmsg_probe() has completedinitialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]The faulting address 0x178 corresponds to the lock variable insidestruct fastrpc_channel_ctx, confirming that cctx is NULL whenfastrpc_rpmsg_callback() attempts to take the spinlock.There are two issues here. First, dev_set_drvdata() is called beforespin_lock_init() and idr_init(), leaving a window where the callbackcan retrieve a valid cctx pointer but operate on an uninitializedspinlock. Second, the rpmsg channel becomes live as soon as the driveris bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata()is called at all, resulting in dev_get_drvdata() returning NULL.Fix both issues by moving all cctx initialization ahead ofdev_set_drvdata() so the structure is fully initialized before itbecomes visible to the callback, and add a NULL check infastrpc_rpmsg_callback() as a guard against any remaining window.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/damon/lru_sort: handle ctx allocation failureDAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its initfunction. damon_lru_sort_enabled_store() wrongly assumes the allocationwill always succeed once tried. If the damon_ctx allocation was failed,therefore, code execution reaches to damon_commit_ctx() while 'ctx' isNULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid theNULL dereference by returning -ENOMEM if 'ctx' is NULL.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: mm: call pagetable dtor when freeing hot-removed page tablesSince 5e8eb9aeeda3 ("arm64: mm: always call PTE/PMD ctor in__create_pgd_mapping()") page-table allocation on ARM64 always callspagetable_{pte,pmd,pud,p4d}_ctor(). This sets the page_type toPGTY_table, increments NR_PAGETABLE and possible allocates a PTL. Howeverthe matching pagetable_dtor() calls were never added.With DEBUG_VM enabled on kernel versions prior to v6.17 without2dfcd1608f3a9 ("mm/page_alloc: let page freeing clear any set page type")this leads to the following warning when freeing these pages due topage->page_type sharing page->_mapcount: BUG: Bad page state in process ... pfn:284fbb page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x284fbb flags: 0x17fffc000000000(node=0|zone=2|lastcpupid=0x1ffff) page_type: f2(table) page dumped because: nonzero mapcount Call trace: bad_page+0x13c/0x160 __free_frozen_pages+0x6cc/0x860 ___free_pages+0xf4/0x180 free_pages+0x54/0x80 free_hotplug_page_range.part.0+0x58/0x90 free_empty_tables+0x438/0x500 __remove_pgd_mapping.constprop.0+0x60/0xa8 arch_remove_memory+0x48/0x80 try_remove_memory+0x158/0x1d8 offline_and_remove_memory+0x138/0x180It can also lead to leaking the ptl allocation if ALLOC_SPLIT_PTLOCKS isdefined and incorrect NR_PAGETABLE stats. Fix this by callingpagetable_dtor() in free_hotplug_pgtable_page() prior to freeing the pageto undo the effects of calling pagetable_*_ctor().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: dwc2: Fix use after free in debug codeWe're not allowed to dereference "urb" after callingusb_hcd_giveback_urb() so save the urb->status ahead of time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:parport: Fix race between port and client registrationThe parport subsystem registers port devices before they are fullyinitialised, resulting in a race condition where client drivers suchas lp can attach to ports that are not completely initialised or evenbeing torn down.When the port and client drivers are built as modules and loadedaround the same time during boot, this occasionally results in acrash. I was able to make this happen reliably in a VM with aPC-style parallel port by patching parport_pc to fail probing:> --- a/drivers/parport/parport_pc.c> +++ b/drivers/parport/parport_pc.c> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,> if (!p)> goto out3;>> - base_res = request_region(base, 3, p->name);> + base_res = NULL;> if (!base_res)> goto out4;>and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc donefor a few seconds.In the long term I think port registration should be changed to putthe call to device_add() inside parport_announce_port(), but since thelatter currently cannot fail this will require changing all portdrivers.For now, add a flag to indicate whether a port has been "announced"and only try to attach client drivers to ports when the flag is set.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device closeSince hci_dev_close_sync() can now be called during the reset path, weshould also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeoutswhile the hdev workqueue is being drained.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: pcm: oss: Fix setup list UAF on proc write errorsnd_pcm_oss_proc_write() links a newly allocated setup entry into theOSS setup list before duplicating the task name. If the task-nameallocation fails, the error path frees the already linked entry andleaves setup_list pointing at freed memory.A later OSS device open can then walk the stale list entry insnd_pcm_oss_look_for_setup() and dereference freed memory.Allocate the task name and initialize the setup entry before publishingthe entry on setup_list. Also fetch the initial proc read iterator onlyafter taking setup_mutex, so all setup_list traversal follows the samelist lifetime rules.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hwmon: (lm90) Stop work before releasing hwmon deviceSashiko reports:In lm90_probe(), the devm action to cancel the alert_work and report_work(lm90_restore_conf) is registered in lm90_init_client() beforedevm_hwmon_device_register_with_info() is called.Because devm executes cleanup actions in reverse order during moduleunbind or probe failure, the hwmon device is unregistered and freed first.If lm90_alert_work() or lm90_report_alarms() runs in the window betweenthe hwmon device being freed and the delayed works being cancelled,lm90_update_alarms() will dereference the freed data->hwmon_dev here.Fix the problem by canceling the workers separately after registeringthe hwmon device and before registering the interrupt handler. This ensuresthat the workers are canceled after interrupts are disabled and beforethe hwmon device is released. Add "shutdown" flag to indicate that deviceshutdown is in progress to prevent workers from being re-armed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: bridge: eb_tables: close module init racesashiko reports for unrelated patch: Does the core ebtables initialization in ebtables.c suffer from a similar race? Once nf_register_sockopt() completes, the sockopts are exposed globally.sockopt has to be registered last, just like in ip/ip6/arptables.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ebtables: move to two-stage removal schemeLike previous patches for x_tables, follow same pattern in ebtables.We can't reuse xt helpers: ebt_table struct layout is incompatible.table->ops assignment is now done while still holding the ebt mutexto make sure we never expose partially-filled table struct.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: x_tables: allocate hook ops while under mutexarp/ip(6)t_register_table() add the table to the per-netns list viaxt_register_table() before allocating the per-netns hook ops copyvia kmemdup_array(). This leaves a window where the table isvisible in the list with ops=NULL.If the pernet exit happens runs concurrently the pre_exit callback findsthe table via xt_find_table() and passes the NULL ops pointer tonf_unregister_net_hooks(), causing a NULL dereference: general protection fault in nf_unregister_net_hooks+0xbc/0x150 RIP: nf_unregister_net_hooks (net/netfilter/core.c:613) Call Trace: ipt_unregister_table_pre_exit iptable_mangle_net_pre_exit ops_pre_exit_list cleanup_netFix by moving the ops allocation into the xtables core so the table isnever in the list without valid ops. Also ensure the table is no longerprocessing packets before its torn down on error unwind.nf_register_net_hooks might have published at least one hook; callsynchronize_rcu() if there was an error.audit log register message gets deferred until all operations havepassed, this avoids need to emit another ureg message in case oferror unwinding.Based on earlier patch by Tristan Madani.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:i2c: i801: fix hardware state machine corruption in error pathA severe livelock and subsequent Hung Task panic were observed in thei2c-i801 driver during concurrent Fuzzing. The crash is caused by anunconditional hardware register cleanup in the error handling path ofi801_access().When i801_check_pre() fails (e.g., returning -EBUSY because the SMBuscontroller is actively used by BIOS/ACPI), the kernel does not actuallyacquire the hardware ownership. However, the code jumps to the 'out'label and executes: iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));This forcefully clears the INUSE_STS lock and resets the hardware statusflags without owning the controller. Doing so interrupts ongoing BIOS/ACPItransactions and totally corrupts the SMBus hardware state machine.Consequently, all subsequent i801_access() calls fail at the pre-checkstage, triggering an endless stream of "SMBus is busy, can't use it!"error logs. Over a slow serial console, this printk flood monopolizesthe CPU (Console Livelock), starving other processes trying to acquirethe mmap_lock down_read semaphore, ultimately triggering the hung taskwatchdog.Fix this by moving the 'out' label below the hardware register cleanup.If i801_check_pre() fails, we safely bypass the iowrite8() and onlyrelease the software locks (pm_runtime and mutex), strictly adhering tothe rule of not releasing resources that were never acquired.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_binduvc_function_bind() walks &opts->extension_units twice without holdingopts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors.The configfs side (uvcg_extension_make / uvcg_extension_drop, indrivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around itslist_add_tail / list_del operations. A privileged userspace processthat holds the configfs subtree open and writes the gadget UDC nameto bind the function while concurrently rmdir()'ing an extensionssubdir can race uvcg_extension_drop() against the bind-time list walksand dereference a freed struct uvcg_extension.Hold opts->lock from the start of the XU string-descriptor fixupthrough the last uvc_copy_descriptors() call, releasing on thedescriptor-error path via a new error_unlock label that drops thelock before falling through to the existing error label. Thismatches the locking discipline of the configfs callbacks and removesthe only remaining unsynchronised reader of the XU list during bind.Reachability: only privileged processes that can mount configfs andwrite to gadget UDC files can trigger the race, so this is acorrectness fix rather than a security boundary.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: Fix hotplug-suspend race during rebootDuring system reboot, cpufreq_suspend() is called via thekernel_restart() -> device_shutdown() path. Unlike the normal systemsuspend path, the reboot path does not call freeze_processes(), souserspace processes and kernel threads remain active.This allows CPU hotplug operations to run concurrently withcpufreq_suspend(). The original code has no synchronization with CPUhotplug, leading to a race condition where governor_data can be freedby the hotplug path while cpufreq_suspend() is still accessing it,resulting in a null pointer dereference: Unable to handle kernel NULL pointer dereference Call Trace: do_kernel_fault+0x28/0x3c cpufreq_suspend+0xdc/0x160 device_shutdown+0x18/0x200 kernel_restart+0x40/0x80 arm64_sys_reboot+0x1b0/0x200Fix this by adding cpus_read_lock()/cpus_read_unlock() tocpufreq_suspend() to block CPU hotplug operations while suspend is inprogress.[ rjw: Changelog edits ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vfio/pci: Release the VGA arbiter client on register_device() failureThe re-order in the Fixes commit below displaced vfio_pci_vga_init() asthe last failure point of what is now vfio_pci_core_register_device()without introducing an unwind for the VGA arbiter registration.In current kernels this is mostly benign because vfio_pci_set_decode()only uses pci_dev state, but the original failure path could leave acallback with a freed vdev cookie. The stale registration also becomesunsafe again once the callback follows drvdata to the vfio device.Add the required VGA unwind callout.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: arc: emac: quiesce interrupts before requesting IRQNormal RX/TX interrupts are enabled later, in arc_emac_open(), so probeshould not see interrupt delivery in the usual case. However, hardware maystill present stale or latched interrupt status left by firmware or thebootloader.If probe later unwinds after devm_request_irq() has installed the handler,such a stale interrupt can still reach arc_emac_intr() during teardown andrace with release of the associated net_device.Avoid that window by putting the device into a known quiescent state beforerequesting the IRQ: disable all EMAC interrupt sources and clear anypending EMAC interrupt status bits. This keeps the change hardware-focusedand minimal, while preventing spurious IRQ delivery from leftover state.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: When loading a plist file, the plistlib module reads data in size specified by the file itself, meaning a malicious file can cause OOM and DoS issues
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: In libexpat through 2.7.3, a crafted file with an approximate size of 2 MiB can lead to dozens of seconds of processing time.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: Use After Free vulnerability has been found in "io.c" program file of gawk (do_getline_redir() routine). This issue may lead to a crash. It affects gawk in versions 5.4.0 and below.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- gawk > 0-0 (version in image is 4.2.1-150000.3.3.1).
Description: Integer overflow vulnerability has been found in "builtin.c" program file of gawk. This issue may lead to memory exhaustion on the hosting operating system and could be used to overwrite gawk heap metadata and objects with attacker-controlled bytes. It affects gawk in versions 5.4.0 and below.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- gawk > 0-0 (version in image is 4.2.1-150000.3.3.1).
Description: Integer overflow vulnerability has been found in "builtin.c" program file of gawk (do_sub() routine). This issue could be used to overwrite gawk heap metadata and objects causing the program to crash. It affects 32-bit builds of gawk in versions 5.4.0 and below.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- gawk > 0-0 (version in image is 4.2.1-150000.3.3.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mctp i2c: initialise event handler read bytesSet a 0xff value for i2c reads of an mctp-i2c device. Otherwise readswill return "val" from the i2c bus driver. For i2c-aspeed andi2c-npcm7xx that is a stack uninitialised u8.Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2cinstance, now it returns all 0xff.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: libusb before version 1.0.30 contains a one-byte out-of-bounds read vulnerability in parse_iad_array() in descriptor.c that allows attackers to trigger a denial of service by supplying a malformed USB descriptor whose bLength equals size minus one, causing the bounds check to use the original buffer size instead of the remaining size. Attackers in virtualized environments with USB passthrough can supply crafted descriptors through libusb_get_active_interface_association_descriptors or libusb_get_interface_association_descriptors to read one byte past the end of the malloc allocation, resulting in a denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libusb-1_0-0 > 0-0 (version in image is 1.0.24-150400.3.3.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: tls: fix strparser anchor skb leak on offload RX setup failureWhen tls_set_device_offload_rx() fails at tls_dev_add(), the error pathcalls tls_sw_free_resources_rx() to clean up the SW context that wasinitialized by tls_set_sw_offload(). This function callstls_sw_release_resources_rx() (which stops the strparser viatls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),but never frees the anchor skb that was allocated by alloc_skb(0) intls_strp_init().Note that tls_sw_free_resources_rx() is exclusively used for this"failed to start offload" code path, there's no other caller.The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not usethe standard strparser"), because the standard strparser doesn't tryto pre-allocate an skb.The normal close path in tls_sk_proto_close() handles cleanup by callingtls_sw_strparser_done() (which calls tls_strp_done()) after droppingthe socket lock, because tls_strp_done() does cancel_work_sync() andthe strparser work handler takes the socket lock.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: always drain queued discard work in ext4_mb_release()While reviewing recent ext4 patch[1], Sashiko raised the followingconcern[2]:> If the filesystem is initially mounted with the discard option,> deleting files will populate sbi->s_discard_list and queue> s_discard_work. If it is then remounted with nodiscard, the> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is> neither cancelled nor flushed.[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.devThe concern was valid, but it had nothing to do with the patch[1].One of the problems with Sashiko in its current (early) form is thatit will detect pre-existing issues and report it as a problem with thepatch that it is reviewing.In practice, it would be hard to hit deliberately (unless you are amalicious syzkaller fuzzer), since it would involve mounting the filesystem with -o discard, and then deleting a large number of files,remounting the file system with -o nodiscard, and then immediatelyunmounting the file system before the queued discard work has a changeto drain on its own.Fix it because it's a real bug, and to avoid Sashiko from raising thisconcern when analyzing future patches to mballoc.c.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:leds: qcom-lpg: Check for array overflow when selecting the high resolutionWhen selecting the high resolution values from the array, FIELD_GET() isused to pull from a 3 bit register, yet the array being indexed has only5 values in it. Odds are the hardware is sane, but just to be safe,properly check before just overflowing and reading random data and thensetting up chip values based on that.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in libssh. A malicious username expanded through %r in ProxyCommand handling can inject shell metacharacters, exposing environment variables and causing unintended shell behavior.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config < 0.9.8-150600.11.15.1 (version in image is 0.9.8-150600.11.12.1).
Description: A flaw was identified in the RelaxNG parser of libxml2 related to how external schema inclusions are handled. The parser does not enforce a limit on inclusion depth when resolving nested directives. Specially crafted or overly complex schemas can cause excessive recursion during parsing. This may lead to stack exhaustion and application crashes, creating a denial-of-service risk.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libxml2-2 > 0-0 (version in image is 2.10.3-150500.5.38.1).
Description: A flaw was found in libssh. A malicious SFTP server can send responses for unknown request IDs that libssh clients keep queued indefinitely, causing unbounded memory growth and client-side denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config < 0.9.8-150600.11.15.1 (version in image is 0.9.8-150600.11.12.1).
Description: A flaw was found in glib. Missing validation of offset and count parameters in the g_buffered_input_stream_peek() function can lead to an integer overflow during length calculation. When specially crafted values are provided, this overflow results in an incorrect size being passed to memcpy(), triggering a buffer overflow. This can cause application crashes, leading to a Denial of Service (DoS).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- glib2-tools > 0-0 (version in image is 2.78.6-150600.4.35.1).
Description: pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 0.14.0 and prior to version 26.0.0, if a user provided callback to `set_tlsext_servername_callback` raised an unhandled exception, this would result in a connection being accepted. If a user was relying on this callback for any security-sensitive behavior, this could allow bypassing it. Starting in version 26.0.0, unhandled exceptions now result in rejecting the connection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3-pyOpenSSL > 0-0 (version in image is 21.0.0-150400.13.1).
Description: libcurl might in some circumstances reuse the wrong connection for SMB(S)transfers.libcurl features a pool of recent connections so that subsequent requests canreuse an existing connection to avoid overhead.When reusing a connection a range of criteria must be met. Due to a logicalerror in the code, a network transfer operation that was requested by anapplication could wrongfully reuse an existing SMB connection to the sameserver that was using a different 'share' than the new subsequent transfershould.This could in unlucky situations lead to the download of the wrong file or theupload of a file to the wrong place. When this happens, the same credentialsare used and the server name is the same.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: sshd in OpenSSH before 10.4 allows remote attackers to cause a denial of service (resource consumption from excessive authentication attempts) because MaxAuthTries was mishandled for GSSAPIAuthentication.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: close TOCTOU race while computing rcv_wndThe MPTCP output path access locklessly the MPTCP-level ack_seqin multiple times, using possibly different values for the data_ackin the DSS option and to compute the announced rcv wnd for the samepacket.Refactor the cote to avoid inconsistencies which may confuse thepeer. Also ensure that the MPTCP level rcv wnd is updated only whenthe egress packet actually contains a DSS ack.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: `Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end of the sibling list, such as with `[last()]` or `[last()-N]`; `.//item[1]` short-circuits after the first match.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix racy may inline data check in dio writesyzbot reports that the following warning from ext4_iomap_begin()triggers as of the commit referenced below: if (WARN_ON_ONCE(ext4_has_inline_data(inode))) return -ERANGE;This occurs during a dio write, which is never expected to encounteran inode with inline data. To enforce this behavior,ext4_dio_write_iter() checks the current inline state of the inodeand clears the MAY_INLINE_DATA state flag to either fall back tobuffered writes, or enforce that any other writers in progress onthe inode are not allowed to create inline data.The problem is that the check for existing inline data and the stateflag can span a lock cycle. For example, if the ilock is originallylocked shared and subsequently upgraded to exclusive, another writermay have reacquired the lock and created inline data before the diowrite task acquires the lock and proceeds.The commit referenced below loosens the lock requirements to allowsome forms of unaligned dio writes to occur under shared lock, butAFAICT the inline data check was technically already racy for anydio write that would have involved a lock cycle. Regardless, liftclearing of the state bit to the same lock critical section thatchecks for preexisting inline data on the inode to close the race.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In OpenSSH before 10.3, command execution can occur via shell metacharacters in a username within a command line. This requires a scenario where the username on the command line is untrusted, and also requires a non-default configurations of % in ssh_config.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: gyro: mpu3050-core: fix pm_runtime error handlingThe return value of pm_runtime_get_sync() is not checked, allowingthe driver to access hardware that may fail to resume. The deviceusage count is also unconditionally incremented. Usepm_runtime_resume_and_get() which propagates errors and avoidsincrementing the usage count on failure.In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()failure since postdisable does not run when preenable fails.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQWhen uart_flush_buffer() runs before the DMA completion IRQ is delivered,the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifouart_xmit_advance() increments kfifo->out by tx_remaining. Sincekfifo_reset() already set both in and out to 0, out wraps past in,causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The nextstart_tx_dma() call then submits a DMA transfer of stale buffer data.Fix this by snapshotting kfifo_len() at the start of handle_tx_dma()and skipping uart_xmit_advance() when fifo_len < tx_remaining, whichindicates the kfifo was reset by a preceding flush.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: tcpm: Validate SVID index in svdm_consume_modes()In svdm_consume_modes(), the SVID value is read from pmdata->svids usingpmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index];If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it resultsin an out-of-bounds read of the pmdata->svids array. Because pd_mode_datais embedded inside struct tcpm_port, indexing past svids reads intoadjacent fields. In particular:- At index 16, it reads the altmodes count.- At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs.By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_indexto 20, the partner can force paltmode->svid to be loaded with an arbitrary,partner- chosen SVID, which is then registered viatypec_partner_register_altmode().Fix this by validating that pmdata->svid_index is non-negative and strictlyless than pmdata->nsvids before accessing the pmdata->svids array insidesvdm_consume_modes().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:x86/fred: Fix system hang during S4 resume with FRED enabledUpon a wakeup from S4, the restore kernel starts and initializes theFRED MSRs as needed from its perspective. It then loads a hibernationimage, including the image kernel, and attempts to load image pagesdirectly into their original page frames used before hibernation unlessthose frames are currently in use. Once all pages are moved to theiroriginal locations, it jumps to a "trampoline" page in the image kernel.At this point, the image kernel takes control, but the FRED MSRs stillcontain values set by the restore kernel, which may differ from thoseset by the image kernel before hibernation. Therefore, the image kernelmust ensure the FRED MSRs have the same values as before hibernation.Since these values depend only on the location of the kernel text anddata, they can be recomputed from scratch.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_memWhen a configuration file provides an object size that is larger than thedriver's known mxt_obj_size(object), the driver intends to discard theextra bytes.The loop iterates using for (i = 0; i < size; i++). Inside the loop, thecondition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue;Since i is a 0-based index, the valid indices for the object are 0 throughmxt_obj_size(object) - 1.When i == mxt_obj_size(object), the condition evaluates to false, and thecode processes the byte instead of discarding it.This causes the code to calculate byte_offset = reg + i - cfg->start_ofsand writes the byte there, overwriting exactly one byte of the adjacentinstance or object.Update the boundary check to skip extra bytes correctly by using >=.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nilfs2: fix potential kernel bug due to lack of writeback flag waitingDestructive writes to a block device on which nilfs2 is mounted can causea kernel bug in the folio/page writeback start routine or writeback endroutine (__folio_start_writeback in the log below): kernel BUG at mm/page-writeback.c:3070! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI ... RIP: 0010:__folio_start_writeback+0xbaa/0x10e0 Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f> 0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00 ... Call Trace: nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2] nilfs_segctor_construct+0x181/0x6b0 [nilfs2] nilfs_segctor_thread+0x548/0x11c0 [nilfs2] kthread+0x2f0/0x390 ret_from_fork+0x4b/0x80 ret_from_fork_asm+0x1a/0x30 This is because when the log writer starts a writeback for segment summaryblocks or a super root block that use the backing device's page cache, itdoes not wait for the ongoing folio/page writeback, resulting in aninconsistent writeback state.Fix this issue by waiting for ongoing writebacks when puttingfolios/pages on the backing device into writeback state.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A vulnerability was found in GNU elfutils 0.192. It has been declared as critical. Affected by this vulnerability is the function dump_data_section/print_string_section of the file readelf.c of the component eu-readelf. The manipulation of the argument z/x leads to buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is 73db9d2021cab9e23fd734b0a76a612d52a6f1db. It is recommended to apply a patch to fix this issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- elfutils > 0-0 (version in image is 0.185-150400.5.8.3).
Description: In the Linux kernel, the following vulnerability has been resolved:ptp: Add a upper bound on max_vclockssyzbot reported WARNING in max_vclocks_store.This occurs when the argument max is too large for kcalloc to handle.Extend the guard to guard against values that are too large forkcalloc
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: pm: in-kernel: always mark signal+subflow endp as usedSyzkaller managed to find a combination of actions that was generatingthis warning: msk->pm.local_addr_used == 0 WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961 Modules linked in: CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline] RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline] RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210 Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a RSP: 0018:ffffc90001663880 EFLAGS: 00010293 RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640 R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650 FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0 Call Trace: genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:742 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2592 ___sys_sendmsg+0x2de/0x320 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66346f826d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8 R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770 The actions that caused that seem to be: - Set the MPTCP subflows limit to 0 - Create an MPTCP endpoint with both the 'signal' and 'subflow' flags - Create a new MPTCP connection from a different address: an ADD_ADDR linked to the MPTCP endpoint will be sent ('signal' flag), but no subflows is initiated ('subflow' flag) - Remove the MPTCP endpoint---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: pip handles concatenated tar and ZIP files as ZIP files regardless of filename or whether a file is both a tar and ZIP file. This behavior could result in confusing installation behavior, such as installing "incorrect" files according to the filename of the archive. New behavior only proceeds with installation if the file identifies uniquely as a ZIP or tar archive, not as both.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: bzip2 contains an off-by-one error in the bzip2recover utility. When processing a specially crafted file, the application performs an out-of-bounds write to a global buffer, resulting in memory corruption and a crash (denial of service).This issue was fixed in bzip2 patch 35d122a3df8b0cc4082a4d89fdc6ee99f375fe67
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libbz2-1 > 0-0 (version in image is 1.0.8-150400.1.122).
Description: In the Linux kernel, the following vulnerability has been resolved:net: af_key: zero aligned sockaddr tail in PF_KEY exportsPF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddrpayload space, so IPv6 addresses occupy 32 bytes on the wire. However,`pfkey_sockaddr_fill()` initializes only the first 28 bytes of`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.Not every PF_KEY message is affected. The state and policy dump buildersalready zero the whole message buffer before filling the sockaddrpayloads. Keep the fix to the export paths that still append alignedsockaddr payloads with plain `skb_put()`: - `SADB_ACQUIRE` - `SADB_X_NAT_T_NEW_MAPPING` - `SADB_X_MIGRATE`Fix those paths by clearing only the aligned sockaddr tail after`pfkey_sockaddr_fill()`.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: of: display_timing: fix refcount leak in of_get_display_timings()of_parse_phandle() returns a device_node with refcount incremented,which is stored in 'entry' and then copied to 'native_mode'. When theerror paths at lines 184 or 192 jump to 'entryfail', native_mode'srefcount is not decremented, causing a refcount leak.Fix this by changing the goto target from 'entryfail' to 'timingfail',which properly calls of_node_put(native_mode) before cleanup.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotapWhen parsing the radiotap header of an injected frame,ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA valuedirectly as a shift count: info->control.antennas |= BIT(*iterator.this_arg);*iterator.this_arg is an 8-bit value taken straight from the framesupplied by userspace, so BIT() can be asked to shift by up to 255. Thatis undefined behaviour on the unsigned long and is reported by UBSAN: UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30 shift exponent 235 is too large for 64-bit type 'unsigned long' Call Trace: ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174 ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451 ... packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antennaindices 0 and 1 can ever be represented. Ignore any larger value insteadof shifting out of bounds.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ethtool: rss: fix indir_table and hkey leak on get_rxfh failurerss_prepare_get() allocates the indirection table and hash key buffervia rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.If get_rxfh() fails, the function returns an error without freeingthe allocation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-af: avoid off-by-one read from userspaceWe try to access count + 1 byte from userspace with memdup_user(buffer,count + 1). However, the userspace only provides buffer of count bytes andonly these count bytes are verified to be okay to access. To ensure thecopied buffer is NUL terminated, we use memdup_user_nul instead.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A security flaw has been discovered in GNU Binutils 2.45. Impacted is the function tg_tag_type of the file prdbg.c. Performing a manipulation results in unchecked return value. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: A weakness has been identified in GNU Binutils 2.45. The affected element is the function vfinfo of the file ldmisc.c. Executing a manipulation can lead to out-of-bounds read. The attack can only be executed locally. The exploit has been made available to the public and could be used for attacks. This patch is called 16357. It is best practice to apply a patch to resolve this issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: pcap_ether_aton() is an auxiliary function in libpcap, it takes a string argument and returns a fixed-size allocated buffer. The string argument must be a well-formed MAC-48 address in one of the supported formats, but this requirement has been poorly documented. If an application calls the function with an argument that deviates from the expected format, the function can read data beyond the end of the provided string and write data beyond the end of the allocated buffer.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libpcap1 > 0-0 (version in image is 1.10.4-150600.3.9.1).
Description: Buffer Overflow vulnerability in libpng 1.6.43-1.6.46 allows a local attacker to cause a denial of service via the pngimage with AddressSanitizer (ASan), the program leaks memory in various locations, eventually leading to high memory usage and causing the program to become unresponsive
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: Buffer Overflow vulnerability in libpng 1.6.43-1.6.46 allows a local attacker to cause a denial of service via png_create_read_struct() function.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.3.20.1).
Description: In the Linux kernel, the following vulnerability has been resolved:efivarfs: Fix memory leak of efivarfs_fs_info in fs_context error pathsWhen processing mount options, efivarfs allocates efivarfs_fs_info (sfi)early in fs_context initialization. However, sfi is associated with thesuperblock and typically freed when the superblock is destroyed. If thefs_context is released (final put) before fill_super is called-such ason error paths or during reconfiguration-the sfi structure would leak,as ownership never transfers to the superblock.Implement the .free callback in efivarfs_context_ops to ensure anyallocated sfi is properly freed if the fs_context is torn down beforefill_super, preventing this memory leak.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: Fix refcount leak for cifs_sb_tlinkFix three refcount inconsistency issues related to `cifs_sb_tlink`.Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to becalled after successful calls to `cifs_sb_tlink()`. Three calls fail toupdate refcount accordingly, leading to possible resource leaks.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:mm: hugetlb: avoid soft lockup when mprotect to large memory areaWhen calling mprotect() to a large hugetlb memory area in our customer'sworkload (~300GB hugetlb memory), soft lockup was observed:watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916]CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : mte_clear_page_tags+0x14/0x24lr : mte_sync_tags+0x1c0/0x240sp : ffff80003150bb80x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2cx8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8Soft lockup is not triggered with THP or base page because there iscond_resched() called for each PMD size.Although the soft lockup was triggered by MTE, it should be not MTEspecific. The other processing which takes long time in the loop maytrigger soft lockup too.So add cond_resched() for hugetlb to avoid soft lockup.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xen/events: Return -EEXIST for bound VIRQsChange find_virq() to return -EEXIST when a VIRQ is bound to adifferent CPU than the one passed in. With that, remove the BUG_ON()from bind_virq_to_irq() to propogate the error upwards.Some VIRQs are per-cpu, but others are per-domain or global. Those mustbe bound to CPU0 and can then migrate elsewhere. The lookup forper-domain and global will probably fail when migrated off CPU 0,especially when the current CPU is tracked. This now returns -EEXISTinstead of BUG_ON().A second call to bind a per-domain or global VIRQ is not expected, butmake it non-fatal to avoid trying to look up the irq, since we don'tknow which per_cpu(virq_to_irq) it will be in.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Binutils objdump contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF debug information. A logic error in the handling of DWARF compilation units can result in an invalid offset_size value being used inside byte_get_little_endian, leading to an abort (SIGABRT). The issue was observed in binutils 2.44. A local attacker can trigger the crash by supplying a malicious input file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: GNU Binutils thru 2.46 readelf contains a null pointer dereference vulnerability when processing a crafted ELF binary with malformed header fields. During relocation processing, an invalid or null section pointer may be passed into display_relocations(), resulting in a segmentation fault (SIGSEGV) and abrupt termination. No evidence of memory corruption beyond the null pointer dereference, nor any possibility of code execution, was observed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: GNU Binutils thru 2.46 readelf contains a vulnerability that leads to an abort (SIGABRT) when processing a crafted ELF binary with malformed DWARF abbrev or debug information. Due to incomplete state cleanup in process_debug_info(), an invalid debug_info_p state may propagate into DWARF attribute parsing routines. When certain malformed attributes result in an unexpected data length of zero, byte_get_little_endian() triggers a fatal abort. No evidence of memory corruption or code execution was observed; the impact is limited to denial of service.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Do not register unsupported perf eventsSynthetic events currently do not have a function to register perf events.This leads to calling the tracepoint register functions with a NULLfunction pointer which triggers: ------------[ cut here ]------------ WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:tracepoint_add_func+0x357/0x370 Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000 RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8 RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780 R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78 FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0 Call Trace: tracepoint_probe_register+0x5d/0x90 synth_event_reg+0x3c/0x60 perf_trace_event_init+0x204/0x340 perf_trace_init+0x85/0xd0 perf_tp_event_init+0x2e/0x50 perf_try_init_event+0x6f/0x230 ? perf_event_alloc+0x4bb/0xdc0 perf_event_alloc+0x65a/0xdc0 __se_sys_perf_event_open+0x290/0x9f0 do_syscall_64+0x93/0x7b0 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? trace_hardirqs_off+0x53/0xc0 entry_SYSCALL_64_after_hwframe+0x76/0x7eInstead, have the code return -ENODEV, which doesn't warn and has perferror out with: # perf record -e synthetic:futex_waitError:The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait)."dmesg | grep -i perf" may provide additional information.Ideally perf should support synthetic events, but for now just fix thewarning. The support can come later.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: avoid chain re-validation if possibleHamza Mahfooz reports cpu soft lock-ups innft_chain_validate(): watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547][..] RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables][..] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_table_validate+0x6b/0xb0 [nf_tables] nf_tables_validate+0x8b/0xa0 [nf_tables] nf_tables_commit+0x1df/0x1eb0 [nf_tables][..]Currently nf_tables will traverse the entire table (chain graph), startingfrom the entry points (base chains), exploring all possible paths(chain jumps). But there are cases where we could avoid revalidation.Consider:1 input -> j2 -> j32 input -> j2 -> j33 input -> j1 -> j2 -> j3Then the second rule does not need to revalidate j2, and, by extension j3,because this was already checked during validation of the first rule.We need to validate it only for rule 3.This is needed because chain loop detection also ensures we do not exceedthe jump stack: Just because we know that j2 is cycle free, its last jumpmight now exceed the allowed stack size. We also need to update allreachable chains with the new largest observed call depth.Care has to be taken to revalidate even if the chain depth won't be anissue: chain validation also ensures that expressions are not called frominvalid base chains. For example, the masquerade expression can only becalled from NAT postrouting base chains.Therefore we also need to keep record of the base chain context (type,hooknum) and revalidate if the chain becomes reachable from a differenthook location.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:audit: add fchmodat2() to change attributes classfchmodat2(), introduced in version 6.6 is currently not in the changeattribute class of audit. Calling fchmodat2() to change a fileattribute in the same fashion than chmod() or fchmodat() will bypassaudit rules such as:-w /tmp/test -p rwa -k test_rwaThe current patch adds fchmodat2() to the change attributes class.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A vulnerability was found in libxml2 up to 2.14.5. It has been declared as problematic. This vulnerability affects the function xmlParseSGMLCatalog of the component xmlcatalog. The manipulation leads to uncontrolled recursion. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The code maintainer explains, that "[t]he issue can only be triggered with untrusted SGML catalogs and it makes absolutely no sense to use untrusted catalogs. I also doubt that anyone is still using SGML catalogs at all."
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libxml2-2 > 0-0 (version in image is 2.10.3-150500.5.38.1).
Description: A vulnerability was determined in jqlang jq up to 1.6. Impacted is the function run_jq_tests of the file jq_test.c of the component JSON Parser. Executing manipulation can lead to reachable assertion. The attack requires local access. The exploit has been publicly disclosed and may be utilized. Other versions might be affected as well.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- jq > 0-0 (version in image is 1.6-150000.3.15.1).
Description: A flaw was found in libssh where it can attempt to open arbitrary files during configuration parsing. A local attacker can exploit this by providing a malicious configuration file or when the system is misconfigured. This vulnerability could lead to a Denial of Service (DoS) by causing the system to try and access dangerous files, such as block devices or large system files, which can disrupt normal operations.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config > 0-0 (version in image is 0.9.8-150600.11.12.1).
Description: A flaw was identified in the interactive shell of the xmllint utility, part of the libxml2 project, where memory allocated for user input is not properly released under certain conditions. When a user submits input consisting only of whitespace, the program skips command execution but fails to free the allocated buffer. Repeating this action causes memory to continuously accumulate. Over time, this can exhaust system memory and terminate the xmllint process, creating a denial-of-service condition on the local system.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libxml2-2 > 0-0 (version in image is 2.10.3-150500.5.38.1).
Description: In the Linux kernel, the following vulnerability has been resolved:null_blk: fix kmemleak by releasing references to fault configfs itemsWhen CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, the null-blkdriver sets up fault injection support by creating the timeout_inject,requeue_inject, and init_hctx_fault_inject configfs items as childrenof the top-level nullbX configfs group.However, when the nullbX device is removed, the references taken tothese fault-config configfs items are not released. As a result,kmemleak reports a memory leak, for example:unreferenced object 0xc00000021ff25c40 (size 32): comm "mkdir", pid 10665, jiffies 4322121578 hex dump (first 32 bytes): 69 6e 69 74 5f 68 63 74 78 5f 66 61 75 6c 74 5f init_hctx_fault_ 69 6e 6a 65 63 74 00 88 00 00 00 00 00 00 00 00 inject.......... backtrace (crc 1a018c86): __kmalloc_node_track_caller_noprof+0x494/0xbd8 kvasprintf+0x74/0xf4 config_item_set_name+0xf0/0x104 config_group_init_type_name+0x48/0xfc fault_config_init+0x48/0xf0 0xc0080000180559e4 configfs_mkdir+0x304/0x814 vfs_mkdir+0x49c/0x604 do_mkdirat+0x314/0x3d0 sys_mkdir+0xa0/0xd8 system_call_exception+0x1b0/0x4f0 system_call_vectored_common+0x15c/0x2ecFix this by explicitly releasing the references to the fault-configconfigfs items when dropping the reference to the top-level nullbXconfigfs group.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: omap-dma: fix dma_pool resource leak in error pathsThe dma_pool created by dma_pool_create() is not destroyed whendma_async_device_register() or of_dma_controller_register() fails,causing a resource leak in the probe error paths.Add dma_pool_destroy() in both error paths to properly release theallocated dma_pool resource.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node()In nfs4_ff_alloc_deviceid_node(), if the allocation for ds_versions fails,the function jumps to the out_scratch label without freeing the alreadyallocated dsaddrs list, leading to a memory leak.Fix this by jumping to the out_err_drain_dsaddrs label, which properlyfrees the dsaddrs list before cleaning up other resources.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:fou: Don't allow 0 for FOU_ATTR_IPPROTO.fou_udp_recv() has the same problem mentioned in the previouspatch.If FOU_ATTR_IPPROTO is set to 0, skb is not freed byfou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().Let's forbid 0 for FOU_ATTR_IPPROTO.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:audit: add missing syscalls to read classThe "at" variant of getxattr() and listxattr() are missing from theaudit read class. Calling getxattrat() or listxattrat() on a file toread its extended attributes will bypass audit rules such as:-w /tmp/test -p rwa -k test_rwaThe current patch adds missing syscalls to the audit read class.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: liquidio: Initialize netdev pointer before queue setupIn setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().However, the pointer to this structure is stored in oct->props[i].netdevonly after the calls to netif_set_real_num_rx_queues() andnetif_set_real_num_tx_queues().If either of these functions fails, setup_nic_devices() returns an errorwithout freeing the allocated netdev. Since oct->props[i].netdev is stillNULL at this point, the cleanup function liquidio_destroy_nic_device()will fail to find and free the netdev, resulting in a memory leak.Fix this by initializing oct->props[i].netdev before calling the queuesetup functions. This ensures that the netdev is properly accessible forcleanup in case of errors.Compile tested only. Issue found using a prototype static analysis tooland code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah()struct irdma_create_ah_resp { // 8 bytes, no padding __u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx) __u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK};rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata().The reserved members of the structure were not zeroed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: atmel-sha204a - Fix OOM ->tfm_count leakIf memory allocation fails, decrement ->tfm_count to avoid blockingfuture reads.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nfnetlink_log: account for netlink header sizeThis is a followup to an old bug fix: NLMSG_DONE needs to accountfor the netlink header size, not just the attribute size.This can result in a WARN splat + drop of the netlink message,but other than this there are no ill effects.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_conntrack_expect: skip expectations in other netns via procSkip expectations that do not reside in this netns.Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns'sconntrack entries via proc").
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: lan966x: fix page pool leak in error pathslan966x_fdma_rx_alloc() creates a page pool but does not destroy it ifthe subsequent fdma_alloc_coherent() call fails, leaking the pool.Similarly, lan966x_fdma_init() frees the coherent DMA memory whenlan966x_fdma_tx_alloc() fails but does not destroy the page pool thatwas successfully created by lan966x_fdma_rx_alloc(), leaking it.Add the missing page_pool_destroy() calls in both error paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm_user: fix info leak in build_report()struct xfrm_user_report is a __u8 proto field followed by a structxfrm_selector which means there is three "empty" bytes of padding, butthe padding is never zeroed before copying to userspace. Fix that up byzeroing the structure before setting individual member variables.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: runc is a CLI tool for spawning and running containers according to the OCI specification. In versions prior to 1.3.6, 1.4.0-rc.1, 1.4.0-rc.12, 1.5.0-rc.1, and 1.5.0-rc.1, when setting up the container rootfs, setupPtmx and setupDevSymlinks call os.Remove and os.Symlink with a filepath.Join string which allow an image with /dev as a symlink to trick runc into deleting files called ptmx on the host or creating a hardcoded set of symlinks with specific names and targets in an arbitrary pre-existing host directory. This issue is not exploitable under Docker, because Docker creates a top-level read-only layer that masks any malicious /dev symlink present in the container image - unlike some other Linux container tooling, whose higher-level runtimes built on runc remain exposed to exploitation via a malicious image. This issue has been fixed in versions 1.3.6, 1.4.3 and 1.5.0.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- runc > 0-0 (version in image is 1.3.4-150000.96.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: i2c/tw9903: Fix potential memory leak in tw9903_probe()In one of the error paths in tw9903_probe(), the memory allocated inv4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix thatby calling v4l2_ctrl_handler_free() on the handler in that error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/bridge: samsung-dsim: Fix memory leak in error pathIn samsung_dsim_host_attach(), drm_bridge_add() is called to add thebridge. However, if samsung_dsim_register_te_irq() orpdata->host_ops->attach() fails afterwards, the function returnswithout removing the bridge, causing a memory leak.Fix this by adding proper error handling with goto labels to ensuredrm_bridge_remove() is called in all error paths. Also ensure thatsamsung_dsim_unregister_te_irq() is called if the attach operationfails after the TE IRQ has been registered.samsung_dsim_unregister_te_irq() function is moved without changesto be before samsung_dsim_host_attach() to avoid forward declaration.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix memory leaks in ceph_mdsc_build_path()Add __putname() calls to error code paths that did not free the "path"pointer obtained by __getname(). If ownership of this pointer is notpassed to the caller via path_info.path, the function must free itbefore returning.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: core: Limit the length of unkillable synchronous timeoutsThe usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs inusbcore allow unlimited timeout durations. And since they useuninterruptible waits, this leaves open the possibility of hanging atask for an indefinitely long time, with no way to kill it short ofunplugging the target device.To prevent this sort of problem, enforce a maximum limit on the lengthof these unkillable timeouts. The limit chosen here, somewhatarbitrarily, is 60 seconds. On many systems (although not all) thisis short enough to avoid triggering the kernel's hung-task detector.In addition, clear up the ambiguity of negative timeout values bytreating them the same as 0, i.e., using the maximum allowed timeout.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()pqi_report_phys_luns() fails to release the rpl_list buffer whenencountering an unsupported data format or when the allocation forrpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,leading to memory leaks.Consolidate the error handling by adding an out_free_rpl_list label and usegoto statements to ensure rpl_list is consistently freed on failure.Compile tested only. Issue found using a prototype static analysis tool andcode review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix memory leak in amdgpu_acpi_enumerate_xcc()In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM,the function returns directly without releasing the allocated xcc_info,resulting in a memory leak.Fix this by ensuring that xcc_info is properly freed in the error paths.Compile tested only. Issue found using a prototype static analysis tooland code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: fix memory leaks in gfs2_fill_super error pathFix two memory leaks in the gfs2_fill_super() error handling path whentransitioning a filesystem to read-write mode fails.First leak: kthread objects (thread_struct, task_struct, etc.)When gfs2_freeze_lock_shared() fails after init_threads() succeeds, thecreated kernel threads (logd and quotad) are never destroyed. Thisoccurs because the fail_per_node label doesn't callgfs2_destroy_threads().Second leak: quota bitmap buffer (8192 bytes)When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds butbefore other operations complete, the allocated quota bitmap is neverfreed.The fix moves thread cleanup to the fail_per_node label to handle allerror paths uniformly. gfs2_destroy_threads() is safe to callunconditionally as it checks for NULL pointers. Quota cleanup is addedin gfs2_make_fs_rw() to properly handle the withdrawal case wherequota initialization succeeds but the filesystem is then withdrawn.Thread leak backtrace (gfs2_freeze_lock_shared failure): unreferenced object 0xffff88801d7bca80 (size 4480): copy_process+0x3a1/0x4670 kernel/fork.c:2422 kernel_clone+0xf3/0x6e0 kernel/fork.c:2779 kthread_create_on_node+0x100/0x150 kernel/kthread.c:478 init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611 gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265Quota leak backtrace (gfs2_make_fs_rw failure): unreferenced object 0xffff88812de7c000 (size 8192): gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409 gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149 gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctxThe bounce buffers are allocated with __get_free_pages() usingBOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation errorpath and nx842_crypto_free_ctx() release the buffers with free_page().Use free_pages() with the matching order instead.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:media: rc: igorplugusb: heed coherency rulesIn a control request, the USB request structurecan be subject to DMA on some HCs. Hence it must obeythe rules for DMA coherency. Allocate it separately.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:vsock/virtio: fix empty payload in tap skb for non-linear buffersFor non-linear skbs, virtio_transport_build_skb() goes throughvirtio_transport_copy_nonlinear_skb() to copy the original payloadin the new skb to be delivered to the vsockmon tap device.This manually initializes an iov_iter but does not set iov_iter.count.Since the iov_iter is zero-initialized, the copy length is zero and nopayload is actually copied to the monitor interface, leaving dataun-initialized.Fix this by removing the linear vs non-linear split and usingskb_copy_datagram_iter() with iov_iter_kvec() for all cases, asvhost-vsock already does. This handles both linear and non-linear skbs,properly initializes the iov_iter, and removes the now unusedvirtio_transport_copy_nonlinear_skb().While touching this code, let's also check the return value ofskb_copy_datagram_iter(), even though it's unlikely to fail.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tap: free page on error paths in tap_get_user_xdp()tap_get_user_xdp() rejects a frame shorter than ETH_HLEN with -EINVAL,and returns -ENOMEM when build_skb() fails. Both paths jump to the errlabel without freeing the page that vhost_net_build_xdp() allocated forthe frame. tap_sendmsg() discards the per-buffer return value and alwaysreturns 0, so vhost_tx_batch() takes the success path and never freesthe page; each rejected frame in a batch leaks one page-frag chunk.Free the page on both error paths, before the skb is built. This is thetap counterpart of the same leak in tun_xdp_one().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.125.1 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:tun: free page on build_skb failure in tun_xdp_one()When build_skb() fails in tun_xdp_one(), the function sets ret to-ENOMEM and jumps to the out label, which returns without freeing thepage that vhost_net_build_xdp() allocated for the frame. As with theshort-frame rejection path, tun_sendmsg() discards the per-buffer errorand still returns total_len, so vhost_tx_batch() takes the success pathand never frees the page. Each build_skb() failure in a batch leaks onepage-frag chunk.Free the page before taking the error path, matching the put_page() theother error exits of tun_xdp_one() already perform.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix a buffer leak in __ceph_setxattr()The old_blob in __ceph_setxattr() can storeci->i_xattrs.prealloc_blob value during the retry.However, it is never called the ceph_buffer_put()for the old_blob object. This patch fixes the issue ofthe buffer leak.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: hamradio: 6pack: fix uninit-value in sixpack_receive_bufsixpack_receive_buf() does not properly skip bytes with TTY error flags.The while loop iterates through the flags buffer but never advances thedata pointer (cp), and passes the original count (including error bytes)to sixpack_decode(). This causes sixpack_decode() to process bytes thatshould have been skipped due to TTY errors. The TTY layer does notguarantee that cp[i] holds a meaningful value when fp[i] is set, sopassing those positions to sixpack_decode() results in KMSAN reportingan uninit-value read.Fix this by processing bytes one at a time, advancing cp on eachiteration, and only passing valid (non-error) bytes to sixpack_decode().This matches the pattern used by slip_receive_buf() andmkiss_receive_buf() for the same purpose.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_fib: fix stale stack leak via the OIFNAME registerFor NFT_FIB_RESULT_OIFNAME the destination register is declared withlen = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes oneregister via "*dest = 0". The remaining three registers are left aswhatever was on the stack in nft_do_chain()'s struct nft_regs, and adownstream expression that loads the register span can leak thatuninitialised kernel stack to userspace.The NFTA_FIB_F_PRESENT existence check has the same shape: it is onlymeaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result typewhile the eval stores a single byte via nft_reg_store8(), leaving the restof the declared span stale.Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other early-return path), and - restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its destination as a single u8, so the marked span matches the one byte the eval writes.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: only release the dirty pages io tree after successful writes[WARNING]With extra warning on dirty extent buffers at umount (aka, the nextpatch in the series), test case generic/388 can trigger the followingwarning about dirty extent buffers at unmount time: BTRFS critical (device dm-2 state E): emergency shutdown BTRFS error (device dm-2 state E): error while writing out transaction: -30 BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction. BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30) BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem BTRFS info (device dm-2 state EA): forced readonly BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c ------------[ cut here ]------------ WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368 CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs] Call Trace: close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] generic_shutdown_super+0x89/0x1a0 kill_anon_super+0x16/0x40 btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] deactivate_locked_super+0x2d/0xb0 cleanup_mnt+0xdc/0x140 task_work_run+0x5a/0xa0 exit_to_user_mode_loop+0x123/0x4b0 do_syscall_64+0x243/0x7c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ---[ end trace 0000000000000000 ]--- BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7I'm using a stripped down version, which seems to trigger the warningmore reliably: _fsstress_pid="" workload() { dmesg -C mkfs.btrfs -f -K $dev > /dev/null echo 1 > /sys/kernel/debug/clear_warn_once mount $dev $mnt $fsstress -w -n 1024 -p 4 -d $mnt & _fsstress_pid=$! sleep 0 $godown $mnt pkill --echo -PIPE fsstress > /dev/null wait $_fsstress_pid unset _fsstress_pid umount $mnt if dmesg | grep -q "WARNING"; then fail fi } for (( i = 0; i < $runtime; i++ )); do echo "=== $i/$runtime ===" workload done[CAUSE]Inside btrfs_write_and_wait_transaction(), we first try to write alldirty ebs, then wait for them to finish.After that we call btrfs_extent_io_tree_release() to free allextent states from dirty_pages io tree.However if we hit an error from btrfs_write_marked_extent(), then westill call btrfs_extent_io_tree_release() to clear that dirty_pages iotree, which may contain dirty records that we haven't yet submitted.Furthermore, the later transaction cleanup path will utilize thatdirty_pages io tree to properly cleanup those dirty ebs, but since it'salready empty, no dirty ebs are properly cleaned up, thus will latertrigger the warnings inside invalidate_btree_folios().---truncated---
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()[Why & How]The aux_rd_interval array in struct dc_lttpr_caps is declared withMAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offsetparameter passed to dp_get_eq_aux_rd_interval() can be as large asMAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.This leads to an out-of-bounds read of aux_rd_interval[7] when offsetis 8.Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements toaccommodate the full range of valid repeater counts defined by the DPspec.(cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04)
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: diff3 tool from GNU diffutils is vulnerable to a heap-based buffer overflow due to multiple signed integer overflows in line-mapping calculations. Incorrect arithmetic in mapping line ranges can result in corrupted values being used for memory allocation and loop bounds.When processing crafted diff output, these overflows may cause the application to allocate insufficient memory and subsequently perform out-of-bounds writes during internal processing. An attacker who can control the output of the diff program used by diff3 (e.g. via --diff-program pointing to a malicious script) can trigger out-of-bounds writes, resulting in a crash and potentially remote code execution depending on the environment.This issue has been fixed in commit 9ff04d5b84743e331e80b589335a52c5480d1815 NOTE:The project maintainers claim that this is not a security issue. They state that the worst outcome this issue can cause is a crash of diff and that it cannot be used to escalate privileges.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- diffutils > 0-0 (version in image is 3.6-4.3.1).
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not foundIn mtk_pcie_setup_irq(), the IRQ domains are allocated before thecontroller's IRQ is fetched. If the latter fails, the functiondirectly returns an error, without cleaning up the allocated domains.Hence, reverse the order so that the IRQ domains are allocated after thecontroller's IRQ is found.This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:mediatek-gen3: add power control support".
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:iio: gyro: itg3200: fix i2c read into the wrong stack locationitg3200_read_all_channels() takes `__be16 *buf' as a parameter andfills the i2c_msg destination as `(char *)&buf'. Since `buf' is theparameter (a pointer), `&buf' is the address of the local pointerslot on the stack of itg3200_read_all_channels(), not the addressof the caller's scan buffer. The (char *) cast hides the typemismatch.i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16)= 8 bytes into the parameter's stack slot, which is discarded whenthe function returns. The caller's scan buffer initg3200_trigger_handler() is never written to, soiio_push_to_buffers_with_timestamp() pushes uninitialised stackcontents to userspace via /dev/iio:deviceX every scan -- both afunctional bug (no actual gyroscope or temperature data isdelivered through the triggered buffer) and an information leak.The non-buffered read_raw() path is unaffected: it goes throughitg3200_read_reg_s16() which uses `&out' on a local s16 value,where that is correct.Drop the spurious `&' so the i2c read writes into the caller'sbuffer.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: fix dst corruption in same register operationFor lshift and rshift, the shift operations are performed in a loop over32-bit words. The loop calculates the shifted value and write it to dst,and then immediately reads from src to calculate the carry for the nextiteration. Because src and dst could point to the same memory location,the carry is incorrectly calculated using the newly modified dst valueinstead of the original src value.Adding a temporary local variable to cache the original value beforewriting to dst and using it for the carry calculation solves theproblem. In addition, partial overlap is rejected from control plane forall kind of operations including byteorder. This was tested with thefollowing bytecode:table test_table ip flags 0 use 1 handle 1ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1ip test_table test_chain 2 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x66443322 0x00887766 ] [ counter pkts 0 bytes 0 ]ip test_table test_chain 4 3 [ immediate reg 1 0x44332211 0x88776655 ] [ bitwise reg 1 = ( reg 1 << 0x08000000 ) ] [ cmp eq reg 1 0x55443322 0x00887766 ] [ counter pkts 21794 bytes 1917798 ]
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm/adreno: Fix a reference leak in a6xx_gpu_init()In a6xx_gpu_init(), node is obtained via of_parse_phandle().While there was a manual of_node_put() at the end of thecommon path, several early error returns would bypass this call,resulting in a reference leak.Fix this by using the __free(device_node) cleanup handler torelease the reference when the variable goes out of scope.Patchwork: https://patchwork.freedesktop.org/patch/700661/
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: wwan: iosm: fix potential memory leaks in ipc_imem_init()The memory allocated in ipc_protocol_init() is not freed on the errorpaths that follow in ipc_imem_init(). Fix that by calling thecorresponding release function ipc_protocol_deinit() in the error path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drivers/base/memory: fix memory block reference leak in poison accountingmemblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory blockvia find_memory_block_by_id(), which acquires a reference to the memoryblock device.Both helpers use the returned memory block without dropping thatreference, leaking the device reference on each successful lookup. Dropthe reference after updating nr_hwpoison.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: digi_acceleport: fix broken rx after throttleIf the port is closed while throttled, the read urb is never resubmittedand the port will not receive any further data until the device isreconnected (or the driver is rebound).Clear the throttle flags and submit the urb if needed when opening theport.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: mtu3: unmap request DMA on queue failuremtu3_gadget_queue() maps the request before checking whetherthe QMU GPD ring can accept another transfer. the request isreturned with -EAGAIN before it is linked on the endpointrequest list if mtu3_prepare_transfer() fails.Normal completion and dequeue paths unmap requests frommtu3_req_complete(), but this error path never reaches thathelper, so the DMA mapping is left active. Unmap the requestbefore returning from the failed queue path.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_printer: take kref only for successful openprinter_open() returns -EBUSY when the character device is alreadyopen, but it increments dev->kref regardless of the return value. VFSdoes not call ->release() for a failed open, so every rejected secondopen permanently leaks one reference.Move kref_get() into the successful-open branch.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: When doing SSH-based transfers using either SCP or SFTP, and asked to dopublic key authentication, curl would wrongly still ask and authenticate usinga locally running SSH agent.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- curl > 0-0 (version in image is 8.14.1-150600.4.43.1).
Description: sigstore-go is a Go library for Sigstore signing and verification. Prior to 1.2.1, sigstore-go does not check a bundle signing timestamp against the validity window of an ExpiringKey wrapping a self-managed long-lived signing key without a certificate, which can allow an attacker holding expired key material to sign accepted bundles. This issue is fixed in version 1.2.1.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- docker > 0-0 (version in image is 29.4.0_ce-150000.250.1).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: nci: free skb on nci_transceive early error pathsnci_transceive() takes ownership of the skb passed by the caller,but the -EPROTO, -EINVAL, and -EBUSY error paths return withoutfreeing it.Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changesthe nci/nci_dev selftest hits the error path occasionally in NIPA,and kmemleak detects leaks:unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: OpenSSH before 10.3 can use unintended ECDSA algorithms. Listing of any ECDSA algorithm in PubkeyAcceptedAlgorithms or HostbasedAcceptedAlgorithms is misinterpreted to mean all ECDSA algorithms.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.42.1).
Description: REXML is an XML toolkit for Ruby. The REXML gems from 3.3.3 to 3.4.1 has a DoS vulnerability when parsing XML containing multiple XML declarations. If you need to parse untrusted XMLs, you may be impacted to these vulnerabilities. The REXML gem 3.4.2 or later include the patches to fix these vulnerabilities.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- libruby2_5-2_5 > 0-0 (version in image is 2.5.9-150000.4.54.1).
Description: In libexpat before 2.8.1, the computational complexity of attribute name collision checks allows a denial of service via moderately sized crafted XML input.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: In the Linux kernel, the following vulnerability has been resolved:memory: tegra124-emc: Fix dll_change checkThe code checking whether the specified memory timing enables DLLin the EMRS register was reversed. DLL is enabled if bit A0 is low.Fix the check.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: CMS (Cryptographic Message Syntax) parsing in gpgsm in GnuPG through 2.5.20 mishandles the CMS format for AES-GCM because aes-ICVlen is supposed to be 12 bytes but 4 bytes is accepted. NOTE: this is related to CVE-2026-34182.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- gpg2 > 0-0 (version in image is 2.4.4-150600.3.15.1).
Description: In netstat in BusyBox through 1.37.0, local users can launch of network application with an argv[0] containing an ANSI terminal escape sequence, leading to a denial of service (terminal locked up) when netstat is used by a victim.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- iproute2 > 0-0 (version in image is 6.4-150600.7.15.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action()fails, the irq vector is not freed, which leads to a memory leak.Replace the devm_add_action with devm_add_action_or_reset to ensurethe irq vector can be destroyed when it fails.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: An issue was discovered in function d_discriminator in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: An issue was discovered in function d_abi_tags in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- binutils > 0-0 (version in image is 2.45-150100.7.57.1).
Description: A vulnerability classified as problematic was found in GNU elfutils 0.192. This vulnerability affects the function elf_strptr in the library /libelf/elf_strptr.c of the component eu-strip. The manipulation leads to denial of service. It is possible to launch the attack on the local host. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The name of the patch is b16f441cca0a4841050e3215a9f120a6d8aea918. It is recommended to apply a patch to fix this issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- elfutils > 0-0 (version in image is 0.185-150400.5.8.3).
Description: In the Linux kernel, the following vulnerability has been resolved:mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()A soft lockup warning was observed on a relative small system x86-64system with 16 GB of memory when running a debug kernel with kmemleakenabled. watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]The test system was running a workload with hot unplug happening inparallel. Then kemleak decided to disable itself due to its inability toallocate more kmemleak objects. The debug kernel has itsCONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.The soft lockup happened in kmemleak_do_cleanup() when the existingkmemleak objects were being removed and deleted one-by-one in a loop via aworkqueue. In this particular case, there are at least 40,000 objectsthat need to be processed and given the slowness of a debug kernel and thefact that a raw_spinlock has to be acquired and released in__delete_object(), it could take a while to properly handle all theseobjects.As kmemleak has been disabled in this case, the object removal anddeletion process can be further optimized as locking isn't really needed. However, it is probably not worth the effort to optimize for such an edgecase that should rarely happen. So the simple solution is to callcond_resched() at periodic interval in the iteration loop to avoid softlockup.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipv6: fix field-spanning memcpy warning in AH outputFix field-spanning memcpy warnings in ah6_output() andah6_output_done() where extension headers are copied to/from IPv6address fields, triggering fortify-string warnings about writes beyondthe 16-byte address fields. memcpy: detected field-spanning write (size 40) of single field "&top_iph->saddr" at net/ipv6/ah6.c:439 (size 16) WARNING: CPU: 0 PID: 8838 at net/ipv6/ah6.c:439 ah6_output+0xe7e/0x14e0 net/ipv6/ah6.c:439The warnings are false positives as the extension headers areintentionally placed after the IPv6 header in memory. Fix by properlycopying addresses and extension headers separately, and introducehelper functions to avoid code duplication.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/cm: Fix leaking the multicast GID table referenceIf the CM ID is destroyed while the CM event for multicast creating isstill queued the cancel_work_sync() will prevent the work from runningwhich also prevents destroying the ah_attr. This leaks a refcount andtriggers a WARN: GID entry ref leak for dev syz1 index 2 ref=573 WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline] WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886Destroy the ah_attr after canceling the work, it is safe to call thistwice.
Packages affected:
- sle-module-basesystem-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in popt, a command-line option parsing library. An off-by-one error in the poptStuffArgs function, when repeatedly called by a host application or through deep alias nesting, can lead to corruption of internal program data. This corruption could potentially enable a local attacker to execute arbitrary code if the host application then unsafely processes the altered data.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpopt0 > 0-0 (version in image is 1.16-3.22).
Description: In the Linux kernel, the following vulnerability has been resolved:nfc: nci: complete pending data exchange on device closeIn nci_close_device(), complete any pending data exchange beforeclosing. The data exchange callback (e.g.rawsock_data_exchange_complete) holds a socket reference.NIPA occasionally hits this leak:unreferenced object 0xff1100000f435000 (size 2048): comm "nci_dev", pid 3954, jiffies 4295441245 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc ec2b3c5): __kmalloc_noprof+0x4db/0x730 sk_prot_alloc.isra.0+0xe4/0x1d0 sk_alloc+0x36/0x760 rawsock_create+0xd1/0x540 nfc_sock_create+0x11f/0x280 __sock_create+0x22d/0x630 __sys_socket+0x115/0x1d0 __x64_sys_socket+0x72/0xd0 do_syscall_64+0x117/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:s390/entry: Scrub r12 register on kernel entryBefore commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"),all entry handlers loaded r12 with the current task pointer(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. Thatcommit removed TIF_ISOLATE_BP, dropping both the branch predictionmacros and the r12 load, but did not add r12 to the register clearingsequence.Add the missing xgr %r12,%r12 to make the register scrub consistentacross all entry points.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: libexpat before 2.8.0 uses insufficient entropy, and thus hash flooding can occur via a crafted XML document.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: In the Tarfile.extract() function, the filter parameter is not passed properly when extracting hardlinks. An affected system that extracts content from untrusted tar files could end up writing files with an unexpected uid/gid despite the user passing filter='data' to the extract() function.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.118.1).
Description: In the Linux kernel, the following vulnerability has been resolved:isofs: validate Rock Ridge CE continuation extent against volume sizerock_continue() reads rs->cont_extent verbatim from the Rock Ridge CErecord and passes it to sb_bread() without checking that the blocknumber is within the mounted ISO 9660 volume. commit e595447e177b("[PATCH] rock.c: handle corrupted directories") added cont_offsetand cont_size rejection for the CE continuation but did not validatethe extent block number itself. commit f54e18f1b831 ("isofs: Fixinfinite looping over CE entries") later capped the CE chain lengthat RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked.With a crafted ISO mounted via udisks2 (desktop optical auto-mount)or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point atan out-of-range block or at blocks belonging to an adjacentfilesystem on the same block device. sb_bread() on an out-of-rangeblock returns NULL cleanly via the block layer EIO path, so thereis no memory-safety violation. For in-range reads of adjacent-filesystem data, the CE buffer is parsed as Rock Ridge records andonly the text of SL sub-records reaches userspace throughreadlink(), which makes the info-leak channel narrow and difficultto exploit; still, rejecting the malformed CE outright matches therejection shape already present in the same function forcont_offset and cont_size.Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() nextto the existing offset/size rejection, printing the samecorrupted-directory-entry notice.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dyingWhen marking a page dirty, complain about not having a running/loaded vCPUif and only if the VM is still alive, i.e. its refcount is non-zero. Thiswill allow fixing a memory leak for x86 SEV-ES guests without hitting whatis effectively a false positive on the WARN.For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest pageacross an exit to userspace, and typically unmaps the page on the nextKVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVMneeds to unmap the page when the vCPU is destroyed, which in turn triggersthe WARN about not having a running vCPU.Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). Butloading a vCPU during destruction is gross (ideally nVMX code would becleaned up), risks complicating the SEV-ES code (KVM would need to ensurethe temporarily load()+put() only runs when the vCPU isn't already loaded),and is ultimately pointless.The motivation for the WARN is to guard against KVM dirtying guest memorywithout pushing the corresponding GFN to the active vCPU's dirty ring, e.g.to ensure userspace doesn't miss a dirty page. But for the VM's refcountto reach zero, there can't be _any_ userspace mappings to the dirty ring,as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. ifuserspace had a valid mapping for the dirty ring, then the vCPU file andthus the owning VM would still be alive. And so since userspace can'tpossibly reach the dirty ring, whether or not KVM technically "misses" apush to the dirty ring is irrelevant.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: free iso schedules on failed submitEHCI and FOTG210 isochronous submits build an ehci_iso_sched beforelinking the URB to the endpoint queue, and keep the staged schedule inurb->hcpriv until iso_stream_schedule() and the link helpers consume it.If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()fails, submit jumps to done_not_linked before that handoff happens andleaks the staged schedule still attached to urb->hcpriv.Free the staged schedule from done_not_linked when submit fails beforethe URB is linked and clear urb->hcpriv after the free.The bug was first flagged by an experimental analysis tool we aredeveloping for kernel memory-management bugs while analyzingv6.13-rc1. The tool is still under development and is not yet publiclyavailable. Manual inspection confirms that the bug is stillpresent in v7.1.1.An x86_64 allyesconfig build showed no new warnings. As we do not have anEHCI host controller with a USB isochronous device to test with, noruntime testing was able to be performed.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ebtables: zero chainstack arraysashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1].Not a real-world bug, such allocation isn't expected to failin the first place.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warningWhen CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRMdriver (e.g. amdgpu for video playback in GNOME Videos / Showtime)triggers a spurious warning: DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \ overlapping mappings aren't supported WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0The call chain is: amdgpu_cs_ioctl -> amdgpu_ttm_backend_bind -> dma_buf_map_attachment -> [udmabuf] map_udmabuf -> get_sg_table -> dma_map_sgtable(dev, sg, direction, 0) // attrs=0 -> debug_dma_map_sg -> add_dma_entry -> EEXISTThis happens because udmabuf builds a per-page scatter-gather list viasg_set_folio(). When begin_cpu_udmabuf() has already created an sgtable mapped for the misc device, and an importer such as amdgpu mapsthe same pages for its own device via map_udmabuf(), the DMA debuginfrastructure sees two active mappings whose physical addresses sharecacheline boundaries and warns about the overlap.The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check inadd_dma_entry() because it signals that no CPU cache maintenance isperformed at map/unmap time, making the cacheline overlap harmless.All other major dma-buf exporters already pass this flag: - drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC - amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNCThe CPU sync at map/unmap time is also redundant for udmabuf:begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicitcache synchronization via dma_sync_sgtable_for_cpu/device() when CPUaccess is requested through the dma-buf interface.Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() anddma_unmap_sgtable() in udmabuf to suppress the spurious warning andskip the redundant sync.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_fs: copy only received bytes on short ep0 readffs_ep0_read() allocates its control-OUT data buffer withkmalloc() (not kzalloc) at the Length value from the Setuppacket, then copies that full len to userspace regardless ofhow many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT;__ffs_ep0_queue_wait() returns req->actual, which on a shortcontrol OUT transfer is strictly less than len. Thecopy_to_user() call still copies len bytes, so on a short OUTthe last (len - ret) bytes of the kmalloc() buffer --uninitialised slab residue -- are delivered to the FunctionFSdaemon.Short ep0 OUT completions are specified USB control-transferbehavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT.A short ep0 OUT is therefore not evidence of a broken UDC; it isa normal condition f_fs has to cope with. The sibling gadgetfsimplementation in drivers/usb/gadget/legacy/inode.c already doesthis correctly via min(len, dev->req->actual) beforecopy_to_user(). This patch brings f_fs.c to the same safepattern rather than trimming at a defensive layer.The bug is reached from the FunctionFS device node, which inreal deployments is owned by the privileged gadget daemon(adbd, UMS, composite gadget services, etc.); it is notreachable from unprivileged userspace. Linux host stacksnormally reject short-wLength control OUTs before they reachthe gadget, so reproducing this required a build thatbypasses that host-side check. With the bypass in place, a1-byte payload on a 64-byte Setup produces 63 bytes ofnon-canary slab residue in the daemon's read buffer.Fix by copying only ret (actually received) bytes touserspace.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:USB: serial: mct_u232: fix missing interrupt-in transfer sanity checkAdd the missing sanity check on the size of interrupt-in transfers toavoid parsing stale or uninitialised slab data (and leaking it to userspace).
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_ct: fix missing expect put in obj evalnft_ct_expect_obj_eval() allocates an expectation and may callnf_ct_expect_related(), but never drops its local reference.Add nf_ct_expect_put(exp) before return to balance allocation.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rt2x00usb: fix devres lifetimeUSB drivers bind to USB interfaces and any device managed resourcesshould have their lifetime tied to the interface rather than parent USBdevice. This avoids issues like memory leaks when drivers are unboundwithout their devices being physically disconnected (e.g. on probedeferral or configuration changes).Fix the USB anchor lifetime so that it is released on driver unbind.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix memory leak in amdgpu_ras_init()When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the functionreturns directly without freeing the allocated con structure, leadingto a memory leak.Fix this by jumping to the release_con label to properly clean up theallocated memory before returning the error code.Compile tested only. Issue found using a prototype static analysis tooland code review.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:netlabel: validate unlabeled address and mask attribute lengthsnetlbl_unlabel_addrinfo_get() used the address attribute length todetermine whether the attribute data could be read as an IPv4 or IPv6address, but did not independently validate the corresponding maskattribute length. A crafted Generic Netlink request could thereforeprovide a valid IPv4/IPv6 address attribute with a shorter maskattribute, which would later be read as a full struct in_addr orstruct in6_addr.NLA_BINARY policy lengths are maximum lengths by default, so useNLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and maskattributes. This rejects short attributes during policy validation andalso exposes the exact length requirements through policy introspection.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:auxdisplay: line-display: fix OOB read on zero-length message_store()linedisp_display() unconditionally reads msg[count - 1] beforechecking whether count is zero, so a write of zero bytes to themessage sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB readThe kernfs write buffer for that store is a 1-byte allocation(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),so msg[-1] is a 1-byte read before the slab object. On aKASAN-enabled kernel this trips an out-of-bounds report andpanics; on stock kernels it silently reads adjacent slab dataand, if that byte happens to be '\n', the following count--wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().linedisp_display() is reached from the message_store() sysfscallback (drivers/auxdisplay/line-display.c message attribute,mode 0644) and from the in-tree initial-message setup withcount == -1, so the OOB path is only userspace-triggerable viazero-byte writes; vfs_write() does not short-circuit oncount == 0 and kernfs_fop_write_iter() dispatches the storecallback regardless.Guard the trailing-newline trim with a count check. Theexisting if (!count) block then takes the clear-display pathunchanged.Affects every auxdisplay driver that registers vialinedisp_register() / linedisp_attach(): ht16k33, max6959,img-ascii-lcd, seg-led-gpio.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_fs: initialize reset_work at allocation timeffs_fs_kill_sb() unconditionally calls cancel_work_sync() onffs->reset_work when a functionfs instance is unmounted: ffs_data_reset(ffs); cancel_work_sync(&ffs->reset_work);However ffs->reset_work is only ever initialized via INIT_WORK() inffs_func_set_alt() and ffs_func_disable(), and only on theFFS_DEACTIVATED path. That state is reached solely by ffs_data_closed()when the instance is mounted with the "no_disconnect" option, so for thecommon case (no "no_disconnect", or mounted and unmounted without everbeing deactivated) reset_work is never initialized.ffs_data_new() allocates the ffs_data with kzalloc_obj() and does notinitialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touchit either, so reset_work.func is left NULL. cancel_work_sync() on such awork then trips the WARN_ON(!work->func) guard in __flush_work(): WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount Call trace: __flush_work cancel_work_sync ffs_fs_kill_sb [usb_f_fs] deactivate_locked_super deactivate_super cleanup_mnt __cleanup_mnt task_work_run exit_to_user_mode_loop el0_svcOn older kernels cancel_work_sync() on a zero-initialized work struct wasa silent no-op, which hid the missing initialization.Initialize reset_work once in ffs_data_new() so it is always valid forthe lifetime of the ffs_data, and drop the now-redundant INIT_WORK()calls from the two deactivation paths.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: A flaw was found in libssh. A remote attacker, by controlling client configuration files or known_hosts files, could craft specific hostnames that when processed by the `match_pattern()` function can lead to inefficient regular expression backtracking. This can cause timeouts and resource exhaustion, resulting in a Denial of Service (DoS) for the client.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libssh-config > 0-0 (version in image is 0.9.8-150600.11.12.1).
Description: An integer underflow was found in the popt library when formatting help text for option tables that exceed the terminal width. A local user who can cause an application to print help under those conditions may cause that application to crash or fail to display help, resulting in a denial of service of the affected application.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libpopt0 > 0-0 (version in image is 1.16-3.22).
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: sti: use managed regmap_field allocationsThe regmap_field objects allocated at player init are never freed andmay leak resources if the driver is removed.Switch to devm_regmap_field_alloc() to automatically limit the lifetimeof the allocations the lifetime of the device.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Arm C1-Ultra, C1-Premium, Neoverse V3 & V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 & X1C, Cortex-A710, Cortex-A78, A78AE & A78C, Cortex-A77, Cortex-A76 & A76A may allow writes to resources owned by a higher exception level.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default < 6.4.0-150600.23.118.1 (version in image is 6.4.0-150600.23.115.1).
Description: Unknown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libblkid1 > 0-0 (version in image is 2.39.3-150600.4.21.1).
Description: Unknown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libblkid1 > 0-0 (version in image is 2.39.3-150600.4.21.1).
Description: Unknown.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libblkid1 > 0-0 (version in image is 2.39.3-150600.4.21.1).
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: arm64: Prevent access to vCPU events before initAnother day, another syzkaller bug. KVM erroneously allows userspace topend vCPU events for a vCPU that hasn't been initialized yet, leading toKVM interpreting a bunch of uninitialized garbage for routing /injecting the exception.In one case the injection code and the hyp disagree on whether the vCPUhas a 32bit EL1 and put the vCPU into an illegal mode for AArch64,tripping the BUG() in exception_target_el() during the next injection: kernel BUG at arch/arm64/kvm/inject_fault.c:40! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : exception_target_el+0x88/0x8c lr : pend_serror_exception+0x18/0x13c sp : ffff800082f03a10 x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000 x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000 x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004 x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20 Call trace: exception_target_el+0x88/0x8c (P) kvm_inject_serror_esr+0x40/0x3b4 __kvm_arm_vcpu_set_events+0xf0/0x100 kvm_arch_vcpu_ioctl+0x180/0x9d4 kvm_vcpu_ioctl+0x60c/0x9f4 __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)Reject the ioctls outright as no sane VMM would call these beforeKVM_ARM_VCPU_INIT anyway. Even if it did the exception would've beenthrown away by the eventual reset of the vCPU's state.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:ixgbevf: fix mailbox API compatibility by negotiating supported featuresThere was backward compatibility in the terms of mailbox API. Variousdrivers from various OSes supporting 10G adapters from Intel portfoliocould easily negotiate mailbox API.This convention has been broken since introducing API 1.4.Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added supportfor IPSec which is specific only for the kernel ixgbe driver. None of therest of the Intel 10G PF/VF drivers supports it. And actually lack ofsupport was not included in the IPSec implementation - there were no suchcode paths. No possibility to negotiate support for the feature wasintroduced along with introduction of the feature itself.Commit 339f28964147 ("ixgbevf: Add support for new mailbox communicationbetween PF and VF") increasing API version to 1.5 did the same - itintroduced code supported specifically by the PF ESX driver. It altered APIversion for the VF driver in the same time not touching the versiondefined for the PF ixgbe driver. It led to additional discrepancies,as the code provided within API 1.6 cannot be supported for Linux ixgbedriver as it causes crashes.The issue was noticed some time ago and mitigated by Jake within the commitd0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").As a result we have regression for IPsec support and after increasing APIto version 1.6 ixgbevf driver stopped to support ESX MBX.To fix this mess add new mailbox op asking PF driver about supportedfeatures. Basing on a response determine whether to set support for IPSecand ESX-specific enhanced mailbox.New mailbox op, for compatibility purposes, must be added within new APIrevision, as API version of OOT PF & VF drivers is already increased to1.6 and doesn't incorporate features negotiate op.Features negotiation mechanism gives possibility to be extended with newfeatures when needed in the future.
Packages affected:
- sle-module-development-tools-release == 15.6 (version in image is 15.6-150600.37.2).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: In the Linux kernel, the following vulnerability has been resolved:soc: fsl: qbman: fix race condition in qman_destroy_fqWhen QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition betweenfq_table[fq->idx] state and freeing/allocating from the pool andWARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.Indeed, we can have: Thread A Thread B qman_destroy_fq() qman_create_fq() qman_release_fqid() qman_shutdown_fq() gen_pool_free() -- At this point, the fqid is available again -- qman_alloc_fqid() -- so, we can get the just-freed fqid in thread B -- fq->fqid = fqid; fq->idx = fqid * 2; WARN_ON(fq_table[fq->idx]); fq_table[fq->idx] = fq; fq_table[fq->idx] = NULL;And adding some logs between qman_release_fqid() andfq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.To prevent that, ensure that fq_table[fq->idx] is set to NULL beforegen_pool_free() is called by using smp_wmb().
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: Perl versions from 5.9.4 before 5.40.4-RC1, from 5.41.0 before 5.42.2-RC1, from 5.43.0 before 5.43.9 contain a vulnerable version of Compress::Raw::Zlib.Compress::Raw::Zlib is included in the Perl package as a dual-life core module, and is vulnerable to CVE-2026-3381 due to a vendored version of zlib which has several vulnerabilities, including CVE-2026-27171. The bundled Compress::Raw::Zlib was updated to version 2.221 in Perl blead commit c75ae9cc164205e1b6d6dbd57bd2c65c8593fe94.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libz1 > 0-0 (version in image is 1.2.13-150500.4.6.1).
Description: In the Linux kernel, the following vulnerability has been resolved:hsr: Remove WARN_ONCE() in hsr_addr_is_self().syzbot reported the warning [0] in hsr_addr_is_self(),whose assumption is simply wrong.hsr->self_node is cleared in hsr_del_self_node(), whichis called from hsr_dellink().Since dev->rtnl_link_ops->dellink() is called beforeunregister_netdevice_many(), there is a window whenuser can find the device but without hsr->self_node.Let's remove WARN_ONCE() in hsr_addr_is_self().[0]:HSR: No self nodeWARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220Modules linked in:CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}Tainted: [L]=SOFTLOCKUPHardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400Call Trace: check_local_dest net/hsr/hsr_forward.c:592 [inline] fill_frame_info net/hsr/hsr_forward.c:728 [inline] hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739 hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236 __netdev_start_xmit include/linux/netdevice.h:5368 [inline] netdev_start_xmit include/linux/netdevice.h:5377 [inline] xmit_one net/core/dev.c:3888 [inline] dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904 __dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237 ip_send_skb net/ipv4/ip_output.c:1510 [inline] ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530 raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f6feb62ce59Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002eRAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- kernel-default > 0-0 (version in image is 6.4.0-150600.23.115.1).
Description: xmlwf in libexpat before 2.8.2 has an integer overflow for the output filename when -d outputDir is used.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: xmlwf in libexpat before 2.8.2 has an integer overflow in resolveSystemId.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- libexpat1 > 0-0 (version in image is 2.7.1-150400.3.37.1).
Description: A vulnerability, which was classified as problematic, has been found in GNU elfutils 0.192. This issue affects the function gelf_getsymshndx of the file strip.c of the component eu-strip. The manipulation leads to denial of service. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is fbf1df9ca286de3323ae541973b08449f8d03aba. It is recommended to apply a patch to fix this issue.
Packages affected:
- sles-release == 15.6 (version in image is 15.6-150600.64.12.1).
- elfutils > 0-0 (version in image is 0.185-150400.5.8.3).