-
Description: When a non-x86 platform is detected, cloud-init grants root access to a hardcoded url with a local IP address. To prevent this, cloud-init default configurations disable platform enumeration.
Packages affected:
- sle-module-public-cloud-release == 15.7 (version in image is 15.7-150700.28.1).
- cloud-init > 0-0 (version in image is 23.3-150100.8.85.4).
-
Description: Memory safety bugs present in Firefox 141 and Thunderbird 141. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 142 and Thunderbird < 142.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libfreebl3 < 3.112.2-150400.3.60.1 (version in image is 3.112-150400.3.57.1).
-
Description: Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache.This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- bind-utils < 9.20.15-150700.3.12.1 (version in image is 9.20.11-150700.3.9.1).
-
Description: In specific circumstances, due to a weakness in the Pseudo Random Number Generator (PRNG) that is used, it is possible for an attacker to predict the source port and query ID that BIND will use.This issue affects BIND 9 versions 9.16.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.16.8-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- bind-utils < 9.20.15-150700.3.12.1 (version in image is 9.20.11-150700.3.9.1).
-
Description: An issue was discovered in the WEBrick toolkit through 1.8.1 for Ruby. It allows HTTP request smuggling by providing both a Content-Length header and a Transfer-Encoding header, e.g., "GET /admin HTTP/1.1\r\n" inside of a "POST /user HTTP/1.1\r\n" request. NOTE: the supplier's position is "Webrick should not be used in production."
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: net-snmp is a SNMP application library, tools and daemon. Prior to versions 5.9.5 and 5.10.pre2, a specially crafted packet to an net-snmp snmptrapd daemon can cause a buffer overflow and the daemon to crash. This issue has been patched in versions 5.9.5 and 5.10.pre2.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libsnmp40 > 0-0 (version in image is 5.9.4-150600.24.5.2).
-
Description: In GnuPG before 2.4.9, armor_filter in g10/armor.c has two increments of an index variable where one is intended, leading to an out-of-bounds write for crafted input. (For ExtendedLTS, 2.2.51 and later are fixed versions.)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- gpg2 > 0-0 (version in image is 2.4.4-150600.3.9.1).
-
Description: Linux Kernel nftables Use-After-Free Local Privilege Escalation Vulnerability; `nft_chain_lookup_byid()` failed to check whether a chain was active and CAP_NET_ADMIN is in any user or network namespace
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()The function lio_target_nacl_info_show() uses sprintf() in a loop to printdetails for every iSCSI connection in a session without checking for thebuffer length. With enough iSCSI connections it's possible to overflow thebuffer provided by configfs and corrupt the memory.This patch replaces sprintf() with sysfs_emit_at() that checks for bufferboundries.
Packages affected:
- cluster-md-kmp-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: sme: Use STR P to clear FFR context field in streaming SVE modeThe FFR is a predicate register which can vary between 16 and 256 bitsin size depending upon the configured vector length. When saving theSVE state in streaming SVE mode, the FFR register is inaccessible andso commit 9f5848665788 ("arm64/sve: Make access to FFR optional") simplyclears the FFR field of the in-memory context structure. Unfortunately,it achieves this using an unconditional 8-byte store and so if the SMEvector length is anything other than 64 bytes in size we will eitherfail to clear the entire field or, worse, we will corrupt memoryimmediately following the structure. This has led to intermittent kfencesplats in CI [1] and can trigger kmalloc Redzone corruption messageswhen running the 'fp-stress' kselftest: | ============================================================================= | BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten | ----------------------------------------------------------------------------- | | 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc | Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531 | __kmalloc+0x8c/0xcc | do_sme_acc+0x9c/0x220 | ...Replace the 8-byte store with a store of a predicate register which hasbeen zero-initialised with PFALSE, ensuring that the entire field iscleared in memory.[1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md: raid1: fix potential OOB in raid1_remove_disk()If rddev->raid_disk is greater than mddev->raid_disks, there will bean out-of-bounds in raid1_remove_disk(). We have already foundsimilar reports as follows:1) commit d17f744e883b ("md-raid10: fix KASAN warning")2) commit 1ebc2cec0b7d ("dm raid: fix KASAN warning in raid5_remove_disk")Fix this bug by checking whether the "number" variable isvalid.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: tls: handle backlogging of crypto requestsSince we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on ourrequests to the crypto API, crypto_aead_{encrypt,decrypt} can return -EBUSY instead of -EINPROGRESS in valid situations. For example, whenthe cryptd queue for AESNI is full (easy to trigger with anartificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueuedto the backlog but still processed. In that case, the async callbackwill also be called twice: first with err == -EINPROGRESS, which itseems we can just ignore, then with err == 0.Compared to Sabrina's original patch this version uses the newtls_*crypt_async_wait() helpers and converts the EBUSY toEINPROGRESS to avoid having to modify all the error handlingpaths. The handling is identical.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: runc is a CLI tool for spawning and running containers according to the OCI specification. In versions 1.2.7 and below, 1.3.0-rc.1 through 1.3.1, 1.4.0-rc.1 and 1.4.0-rc.2 files, runc would not perform sufficient verification that the source of the bind-mount (i.e., the container's /dev/null) was actually a real /dev/null inode when using the container's /dev/null to mask. This exposes two methods of attack: an arbitrary mount gadget, leading to host information disclosure, host denial of service, container escape, or a bypassing of maskedPaths. This issue is fixed in versions 1.2.8, 1.3.3 and 1.4.0-rc.3.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- runc < 1.3.3-150000.85.1 (version in image is 1.2.6-150000.73.2).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bus: mhi: host: Detect events pointing to unexpected TREsWhen a remote device sends a completion event to the host, it contains apointer to the consumed TRE. The host uses this pointer to process all ofthe TREs between it and the host's local copy of the ring's read pointer.This works when processing completion for chained transactions, but canlead to nasty results if the device sends an event for a single-elementtransaction with a read pointer that is multiple elements ahead of thehost's read pointer.For instance, if the host accesses an event ring while the device isupdating it, the pointer inside of the event might still point to an oldTRE. If the host uses the channel's xfer_cb() to directly free the bufferpointed to by the TRE, the buffer will be double-freed.This behavior was observed on an ep that used upstream EP stack without'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after bufferis written")'. Where the device updated the events ring pointer beforeupdating the event contents, so it left a window where the host was able toaccess the stale data the event pointed to, before the device had thechance to update them. The usual pattern was that the host received anevent pointing to a TRE that is not immediately after the last processedone, so it got treated as if it was a chained transaction, processing allof the TREs in between the two read pointers.This commit aims to harden the host by ensuring transactions where theevent points to a TRE that isn't local_rp + 1 are chained.[mani: added stable tag and reworded commit message]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: rose: include node references in rose_neigh refcountCurrent implementation maintains two separate reference countingmechanisms: the 'count' field in struct rose_neigh tracks references fromrose_node structures, while the 'use' field (now refcount_t) tracksreferences from rose_sock.This patch merges these two reference counting systems using 'use' fieldfor proper reference management. Specifically, this patch adds incrementingand decrementing of rose_neigh->use when rose_neigh->count is incrementedor decremented.This patch also modifies rose_rt_free(), rose_rt_device_down() androse_clear_route() to properly release references to rose_neigh objectsbefore freeing a rose_node through rose_remove_node().These changes ensure rose_neigh structures are properly freed only whenall references, including those from rose_node structures, are released.As a result, this resolves a slab-use-after-free issue reported by Syzbot.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"and then dereferences it on the next line. Two lines later, we takea mutex so I don't think this is an RCU safe region. Re-order it to dothe dereferences before queuing up the free.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smc: Use __sk_dst_get() and dst_dev_rcu() in in smc_clc_prfx_set().smc_clc_prfx_set() is called during connect() and not under RCUnor RTNL.Using sk_dst_get(sk)->dev could trigger UAF.Let's use __sk_dst_get() and dev_dst_rcu() under rcu_read_lock()after kernel_getsockname().Note that the returned value of smc_clc_prfx_set() is not usedin the caller.While at it, we change the 1st arg of smc_clc_prfx_set[46]_rcu()not to touch dst there.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: GNU Tar through 1.35 allows file overwrite via directory traversal in crafted TAR archives, with a certain two-step process. First, the victim must extract an archive that contains a ../ symlink to a critical directory. Second, the victim must extract an archive that contains a critical file, specified via a relative pathname that begins with the symlink name and ends with that critical file's name. Here, the extraction follows the symlink and overwrites the critical file. This bypasses the protection mechanism of "Member name contains '..'" that would occur for a single TAR archive that attempted to specify the critical file via a ../ approach. For example, the first archive can contain "x -> ../../../../../home/victim/.ssh" and the second archive can contain x/authorized_keys. This can affect server applications that automatically extract any number of user-supplied TAR archives, and were relying on the blocking of traversal. This can also affect software installation processes in which "tar xf" is run more than once (e.g., when installing a package can automatically install two dependencies that are set up as untrusted tarballs instead of official packages). NOTE: the official GNU Tar manual has an otherwise-empty directory for each "tar xf" in its Security Rules of Thumb; however, third-party advice leads users to run "tar xf" more than once into the same directory.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- tar > 0-0 (version in image is 1.34-150000.3.34.1).
-
Description: runc is a CLI tool for spawning and running containers according to the OCI specification. Versions 1.0.0-rc3 through 1.2.7, 1.3.0-rc.1 through 1.3.2, and 1.4.0-rc.1 through 1.4.0-rc.2, due to insufficient checks when bind-mounting `/dev/pts/$n` to `/dev/console` inside the container, an attacker can trick runc into bind-mounting paths which would normally be made read-only or be masked onto a path that the attacker can write to. This attack is very similar in concept and application to CVE-2025-31133, except that it attacks a similar vulnerability in a different target (namely, the bind-mount of `/dev/pts/$n` to `/dev/console` as configured for all containers that allocate a console). This happens after `pivot_root(2)`, so this cannot be used to write to host files directly -- however, as with CVE-2025-31133, this can load to denial of service of the host or a container breakout by providing the attacker with a writable copy of `/proc/sysrq-trigger` or `/proc/sys/kernel/core_pattern` (respectively). This issue is fixed in versions 1.2.8, 1.3.3 and 1.4.0-rc.3.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- runc < 1.3.3-150000.85.1 (version in image is 1.2.6-150000.73.2).
-
Description: runc is a CLI tool for spawning and running containers according to the OCI specification. In versions 1.2.7, 1.3.2 and 1.4.0-rc.2, an attacker can trick runc into misdirecting writes to /proc to other procfs files through the use of a racing container with shared mounts (we have also verified this attack is possible to exploit using a standard Dockerfile with docker buildx build as that also permits triggering parallel execution of containers with custom shared mounts configured). This redirect could be through symbolic links in a tmpfs or theoretically other methods such as regular bind-mounts. While similar, the mitigation applied for the related CVE, CVE-2019-19921, was fairly limited and effectively only caused runc to verify that when LSM labels are written they are actually procfs files. This issue is fixed in versions 1.2.8, 1.3.3, and 1.4.0-rc.3.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- runc < 1.3.3-150000.85.1 (version in image is 1.2.6-150000.73.2).
-
Description: An undocumented and unsafe feature in the PLY (Python Lex-Yacc) library 3.11 allows Remote Code Execution (RCE) via the `picklefile` parameter in the `yacc()` function. This parameter accepts a `.pkl` file that is deserialized with `pickle.load()` without validation. Because `pickle` allows execution of embedded code via `__reduce__()`, an attacker can achieve code execution by passing a malicious pickle file. The parameter is not mentioned in official documentation or the GitHub repository, yet it is active in the PyPI version. This introduces a stealthy backdoor and persistence risk.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-ply > 0-0 (version in image is 3.11-150400.12.6.1).
-
Description: A flaw was found in Libtiff. This vulnerability is a "write-what-where" condition, triggered when the library processes a specially crafted TIFF image file.By providing an abnormally large image height value in the file's metadata, an attacker can trick the library into writing attacker-controlled color data to an arbitrary memory location. This memory corruption can be exploited to cause a denial of service (application crash) or to achieve arbitrary code execution with the permissions of the user.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libtiff5 < 4.0.9-150000.45.60.1 (version in image is 4.0.9-150000.45.55.1).
-
Description: Passing too large an alignment to the memalign suite of functions (memalign, posix_memalign, aligned_alloc) in the GNU C Library version 2.30 to 2.42 may result in an integer overflow, which could consequently result in a heap corruption.Note that the attacker must have control over both, the size as well as the alignment arguments of the memalign function to be able to exploit this. The size parameter must be close enough to PTRDIFF_MAX so as to overflow size_t along with the large alignment argument. This limits the malicious inputs for the alignment for memalign to the range [1<<62+ 1, 1<<63] and exactly 1<<63 for posix_memalign and aligned_alloc.Typically the alignment argument passed to such functions is a known constrained quantity (e.g. page size, block size, struct sizes) and is not attacker controlled, because of which this may not be easily exploitable in practice. An application bug could potentially result in the input alignment being too large, e.g. due to a different buffer overflow or integer overflow in the application or its dependent libraries, but that is again an uncommon usage pattern given typical sources of alignments.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glibc > 0-0 (version in image is 2.38-150600.14.37.1).
-
Description: The mkdumprd script called "dracut" in the current working directory "." allows local users to trick the administrator into executing code as root.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kdump < 2.0.18-150700.1.2 (version in image is 2.0.18+git2.g881ca8c-150700.3.3.2).
-
Description: A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glib2-tools < 2.78.6-150600.4.25.1 (version in image is 2.78.6-150600.4.16.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: check S1G action frame sizeBefore checking the action code, check that it evenexists in the frame.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: When folding a long comment in an email header containing exclusively unfoldable characters, the parenthesis would not be preserved. This could be used for injecting headers into email messages where addresses are user-controlled and not sanitized.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- python311 > 0-0 (version in image is 3.11.13-150600.3.35.2).
-
Description: A flaw was found in the exsltFuncResultComp() function of libxslt, which handles EXSLT elements during stylesheet parsing. Due to improper type handling, the function may treat an XML document node as a regular XML element node, resulting in a type confusion. This can cause unexpected memory reads and potential crashes. While difficult to exploit, the flaw could lead to application instability or denial of service.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libxslt1 < 1.1.34-150400.3.13.1 (version in image is 1.1.34-150400.3.6.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sunrpc: fix null pointer dereference on zero-length checksumIn xdr_stream_decode_opaque_auth(), zero-length checksum.len causeschecksum.data to be set to NULL. This triggers a NPD when accessingchecksum.data in gss_krb5_verify_mic_v2(). This patch ensures thatthe value of checksum.len is not less than XDR_UNIT.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: Fix MAC comparison to be constant-timeTo prevent timing attacks, MACs need to be compared in constant time.Use the appropriate helper function for this.
Packages affected:
- cluster-md-kmp-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
-
Description: SSH clients receiving SSH_AGENT_SUCCESS when expecting a typed response will panic and cause early termination of the client process.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- docker > 0-0 (version in image is 28.3.3_ce-150000.230.1).
-
Description: Rack is a modular Ruby web server interface. Prior to version 2.2.18, Rack::QueryParser enforces its params_limit only for parameters separated by &, while still splitting on both & and ;. As a result, attackers could use ; separators to bypass the parameter count limit and submit more parameters than intended. Applications or middleware that directly invoke Rack::QueryParser with its default configuration (no explicit delimiter) could be exposed to increased CPU and memory consumption. This can be abused as a limited denial-of-service vector. This issue has been patched in version 2.2.18.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-rack > 0-0 (version in image is 2.0.8-150000.3.31.1).
-
Description: Rack is a modular Ruby web server interface. In versions prior to 2.2.19, 3.1.17, and 3.2.2, `Rack::Multipart::Parser` buffers the entire multipart preamble (bytes before the first boundary) in memory without any size limit. A client can send a large preamble followed by a valid boundary, causing significant memory use and potential process termination due to out-of-memory (OOM) conditions. Remote attackers can trigger large transient memory spikes by including a long preamble in multipart/form-data requests. The impact scales with allowed request sizes and concurrency, potentially causing worker crashes or severe slowdown due to garbage collection. Versions 2.2.19, 3.1.17, and 3.2.2 enforce a preamble size limit (e.g., 16 KiB) or discard preamble data entirely. Workarounds include limiting total request body size at the proxy or web server level and monitoring memory and set per-process limits to prevent OOM conditions.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-rack > 0-0 (version in image is 2.0.8-150000.3.31.1).
-
Description: Rack is a modular Ruby web server interface. In versions prior to 2.2.19, 3.1.17, and 3.2.2, ``Rack::Multipart::Parser` stores non-file form fields (parts without a `filename`) entirely in memory as Ruby `String` objects. A single large text field in a multipart/form-data request (hundreds of megabytes or more) can consume equivalent process memory, potentially leading to out-of-memory (OOM) conditions and denial of service (DoS). Attackers can send large non-file fields to trigger excessive memory usage. Impact scales with request size and concurrency, potentially leading to worker crashes or severe garbage-collection overhead. All Rack applications processing multipart form submissions are affected. Versions 2.2.19, 3.1.17, and 3.2.2 enforce a reasonable size cap for non-file fields (e.g., 2 MiB). Workarounds include restricting maximum request body size at the web-server or proxy layer (e.g., Nginx `client_max_body_size`) and validating and rejecting unusually large form fields at the application level.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-rack > 0-0 (version in image is 2.0.8-150000.3.31.1).
-
Description: Rack is a modular Ruby web server interface. In versions prior to 2.2.19, 3.1.17, and 3.2.2, `Rack::Multipart::Parser` can accumulate unbounded data when a multipart part's header block never terminates with the required blank line (`CRLFCRLF`). The parser keeps appending incoming bytes to memory without a size cap, allowing a remote attacker to exhaust memory and cause a denial of service (DoS). Attackers can send incomplete multipart headers to trigger high memory use, leading to process termination (OOM) or severe slowdown. The effect scales with request size limits and concurrency. All applications handling multipart uploads may be affected. Versions 2.2.19, 3.1.17, and 3.2.2 cap per-part header size (e.g., 64 KiB). As a workaround, restrict maximum request sizes at the proxy or web server layer (e.g., Nginx `client_max_body_size`).
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-rack > 0-0 (version in image is 2.0.8-150000.3.31.1).
-
Description: Rack is a modular Ruby web server interface. Prior to versions 2.2.20, 3.1.18, and 3.2.3, `Rack::Request#POST` reads the entire request body into memory for `Content-Type: application/x-www-form-urlencoded`, calling `rack.input.read(nil)` without enforcing a length or cap. Large request bodies can therefore be buffered completely into process memory before parsing, leading to denial of service (DoS) through memory exhaustion. Users should upgrade to Rack version 2.2.20, 3.1.18, or 3.2.3, anu of which enforces form parameter limits using `query_parser.bytesize_limit`, preventing unbounded reads of `application/x-www-form-urlencoded` bodies. Additionally, enforce strict maximum body size at the proxy or web server layer (e.g., Nginx `client_max_body_size`, Apache `LimitRequestBody`).
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-rack < 2.2.20-150000.3.34.1 (version in image is 2.0.8-150000.3.31.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/handshake: duplicate handshake cancellations leak socketWhen a handshake request is cancelled it is removed from thehandshake_net->hn_requests list, but it is still present in thehandshake_rhashtbl until it is destroyed.If a second cancellation request arrives for the same handshake request,then remove_pending() will return false... and assumingHANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continueprocessing through the out_true label, where we put another reference onthe sock and a refcount underflow occurs.This can happen for example if a handshake times out - particularly ifthe SUNRPC client sends the AUTH_TLS probe to the server but doesn'tfollow it up with the ClientHello due to a problem with tlshd. When thetimeout is hit on the server, the server will send a FIN, which triggersa cancellation request via xs_reset_transport(). When the timeout ishit on the client, another cancellation request happens viaxs_tls_handshake_sync().Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancelpath so duplicate cancels can be detected.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipvs: fix ipv4 null-ptr-deref in route error pathThe IPv4 code path in __ip_vs_get_out_rt() calls dst_link_failure()without ensuring skb->dev is set, leading to a NULL pointer dereferencein fib_compute_spec_dst() when ipv4_link_failure() attempts to sendICMP destination unreachable messages.The issue emerged after commit ed0de45a1008 ("ipv4: recompile ip optionsin ipv4_link_failure") started calling __ip_options_compile() fromipv4_link_failure(). This code path eventually calls fib_compute_spec_dst()which dereferences skb->dev. An attempt was made to fix the NULL skb->devdereference in commit 0113d9c9d1cc ("ipv4: fix null-deref inipv4_link_failure"), but it only addressed the immediate dev_net(skb->dev)dereference by using a fallback device. The fix was incomplete becausefib_compute_spec_dst() later in the call chain still accesses skb->devdirectly, which remains NULL when IPVS calls dst_link_failure().The crash occurs when:1. IPVS processes a packet in NAT mode with a misconfigured destination2. Route lookup fails in __ip_vs_get_out_rt() before establishing a route3. The error path calls dst_link_failure(skb) with skb->dev == NULL4. ipv4_link_failure() -> ipv4_send_dest_unreach() -> __ip_options_compile() -> fib_compute_spec_dst()5. fib_compute_spec_dst() dereferences NULL skb->devApply the same fix used for IPv6 in commit 326bf17ea5d4 ("ipvs: fixipv6 route unreach panic"): set skb->dev from skb_dst(skb)->dev beforecalling dst_link_failure().KASAN: null-ptr-deref in range [0x0000000000000328-0x000000000000032f]CPU: 1 PID: 12732 Comm: syz.1.3469 Not tainted 6.6.114 #2RIP: 0010:__in_dev_get_rcu include/linux/inetdevice.h:233RIP: 0010:fib_compute_spec_dst+0x17a/0x9f0 net/ipv4/fib_frontend.c:285Call Trace: spec_dst_fill net/ipv4/ip_options.c:232 spec_dst_fill net/ipv4/ip_options.c:229 __ip_options_compile+0x13a1/0x17d0 net/ipv4/ip_options.c:330 ipv4_send_dest_unreach net/ipv4/route.c:1252 ipv4_link_failure+0x702/0xb80 net/ipv4/route.c:1265 dst_link_failure include/net/dst.h:437 __ip_vs_get_out_rt+0x15fd/0x19e0 net/netfilter/ipvs/ip_vs_xmit.c:412 ip_vs_nat_xmit+0x1d8/0xc80 net/netfilter/ipvs/ip_vs_xmit.c:764
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-aiohttp > 0-0 (version in image is 3.9.3-150400.10.33.1).
-
Description: AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow for an infinite loop to occur when assert statements are bypassed, resulting in a DoS attack when processing a POST body. If optimizations are enabled (-O or PYTHONOPTIMIZE=1), and the application includes a handler that uses the Request.post() method, then an attacker may be able to execute a DoS attack with a specially crafted message. This issue is fixed in version 3.13.3.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-aiohttp > 0-0 (version in image is 3.9.3-150400.10.33.1).
-
Description: AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a request to be crafted in such a way that an AIOHTTP server's memory fills up uncontrollably during processing. If an application includes a handler that uses the Request.post() method, an attacker may be able to freeze the server by exhausting the memory. This issue is fixed in version 3.13.3.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-aiohttp > 0-0 (version in image is 3.9.3-150400.10.33.1).
-
Description: AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. In versions 3.13.2 and below, handling of chunked messages can result in excessive blocking CPU usage when receiving a large number of chunks. If an application makes use of the request.read() method in an endpoint, it may be possible for an attacker to cause the server to spend a moderate amount of blocking CPU time (e.g. 1 second) while processing the request. This could potentially lead to DoS as the server would be unable to handle other requests during that time. This issue is fixed in version 3.13.3.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-aiohttp > 0-0 (version in image is 3.9.3-150400.10.33.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()There exists a kernel oops caused by a BUG_ON(nhead < 0) atnet/core/skbuff.c:2232 in pskb_expand_head().This bug is triggered as part of the calipso_skbuff_setattr()routine when skb_cow() is passed headroom > INT_MAX(i.e. (int)(skb_headroom(skb) + len_delta) < 0).The root cause of the bug is due to an implicit integer cast in__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensurethat delta = headroom - skb_headroom(skb) is never negative, otherwisewe will trigger a BUG_ON in pskb_expand_head(). However, ifheadroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, deltabecomes negative, and pskb_expand_head() is passed a negative value fornhead.Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()by only using skb_cow() to grow headroom.PoC: Using `netlabelctl` tool: netlabelctl map del default netlabelctl calipso add pass doi:7 netlabelctl map add default address:0::1/128 protocol:calipso,7 Then run the following PoC: int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP); // setup msghdr int cmsg_size = 2; int cmsg_len = 0x60; struct msghdr msg; struct sockaddr_in6 dest_addr; struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1, sizeof(struct cmsghdr) + cmsg_len); msg.msg_name = &dest_addr; msg.msg_namelen = sizeof(dest_addr); msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = cmsg; msg.msg_controllen = cmsg_len; msg.msg_flags = 0; // setup sockaddr dest_addr.sin6_family = AF_INET6; dest_addr.sin6_port = htons(31337); dest_addr.sin6_flowinfo = htonl(31337); dest_addr.sin6_addr = in6addr_loopback; dest_addr.sin6_scope_id = 31337; // setup cmsghdr cmsg->cmsg_len = cmsg_len; cmsg->cmsg_level = IPPROTO_IPV6; cmsg->cmsg_type = IPV6_HOPOPTS; char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr); hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80 sendmsg(fd, &msg, 0);
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verfA zero length gss_token results in pages == 0 and in_token->pages[0]is NULL. The code unconditionally evaluatespage_address(in_token->pages[0]) for the initial memcpy, which candereference NULL even when the copy length is 0. Guard the firstmemcpy so it only runs when length > 0.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: Querying for records within a specially crafted zone containing certain malformed DNSKEY records can lead to CPU exhaustion.This issue affects BIND 9 versions 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- bind-utils < 9.20.15-150700.3.12.1 (version in image is 9.20.11-150700.3.9.1).
-
Description: When using http.cookies.Morsel, user-controlled cookie values and parameters can allow injecting HTTP headers into messages. Patch rejects all control characters within cookie names, values, and parameters.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- python311 > 0-0 (version in image is 3.11.13-150600.3.35.2).
-
Description: pyasn1 is a generic ASN.1 library for Python. Prior to 0.6.2, a Denial-of-Service issue has been found that leads to memory exhaustion from malformed RELATIVE-OID with excessive continuation octets. This vulnerability is fixed in 0.6.2.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- python3-pyasn1 > 0-0 (version in image is 0.4.2-150000.3.8.1).
-
Description: pyjwt v2.10.1 was discovered to contain weak encryption. NOTE: this is disputed by the Supplier because the key length is chosen by the application that uses the library (admittedly, library users may benefit from a minimum value and a mechanism for opting in to strict enforcement).
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- python3-PyJWT > 0-0 (version in image is 2.4.0-150200.3.8.1).
-
Description: containerd is an open-source container runtime. Versions 0.1.0 through 1.7.28, 2.0.0-beta.0 through 2.0.6, 2.1.0-beta.0 through 2.1.4 and 2.2.0-beta.0 through 2.2.0-rc.1 have an overly broad default permission vulnerability. Directory paths `/var/lib/containerd`, `/run/containerd/io.containerd.grpc.v1.cri` and `/run/containerd/io.containerd.sandbox.controller.v1.shim` were all created with incorrect permissions. This issue is fixed in versions 1.7.29, 2.0.7, 2.1.5 and 2.2.0. Workarounds include updating system administrator permissions so the host can manually chmod the directories to not have group or world accessible permissions, or to run containerd in rootless mode.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- containerd < 1.7.29-150000.128.1 (version in image is 1.7.27-150000.123.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: prevent potential out-of-bounds writes in handle_auth_session_key()The len field originates from untrusted network packets. Boundarychecks have been added to prevent potential out-of-bounds writes whendecrypting the connection secret or processing service tickets.[ idryomov: changelog ]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glib2-tools < 2.78.6-150600.4.25.1 (version in image is 2.78.6-150600.4.16.1).
-
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.52, an out-of-bounds read vulnerability in libpng's simplified API allows reading up to 1012 bytes beyond the png_sRGB_base[512] array when processing valid palette PNG images with partial transparency and gamma correction. The PNG files that trigger this vulnerability are valid per the PNG specification; the bug is in libpng's internal state management. Upgrade to libpng 1.6.52 or later.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpng16-16 < 1.6.40-150600.3.3.1 (version in image is 1.6.40-150600.1.3).
-
Description: A possible escalation to RCE vulnerability exists when using YAML serialized columns in Active Record < 7.0.3.1, <6.1.6.1, <6.0.5.1 and <5.2.8.1 which could allow an attacker, that can manipulate data in the database (via means like SQL injection), the ability to escalate to an RCE.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-activerecord-5_1 > 0-0 (version in image is 5.1.4-150000.5.6.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mt76: mt7921e: fix rmmod crash in driver reload testIn insmod/rmmod stress test, the following crash dump shows up immediately.The problem is caused by missing mt76_dev in mt7921_pci_remove(). Weshould make sure the drvdata is ready before probe() finished.[168.862789] ==================================================================[168.862797] BUG: KASAN: user-memory-access in try_to_grab_pending+0x59/0x480[168.862805] Write of size 8 at addr 0000000000006df0 by task rmmod/5361[168.862812] CPU: 7 PID: 5361 Comm: rmmod Tainted: G OE 5.19.0-rc6 #1[168.862816] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, 05/04/2020[168.862820] Call Trace:[168.862822] [168.862825] dump_stack_lvl+0x49/0x63[168.862832] print_report.cold+0x493/0x6b7[168.862845] kasan_report+0xa7/0x120[168.862857] kasan_check_range+0x163/0x200[168.862861] __kasan_check_write+0x14/0x20[168.862866] try_to_grab_pending+0x59/0x480[168.862870] __cancel_work_timer+0xbb/0x340[168.862898] cancel_work_sync+0x10/0x20[168.862902] mt7921_pci_remove+0x61/0x1c0 [mt7921e][168.862909] pci_device_remove+0xa3/0x1d0[168.862914] device_remove+0xc4/0x170[168.862920] device_release_driver_internal+0x163/0x300[168.862925] driver_detach+0xc7/0x1a0[168.862930] bus_remove_driver+0xeb/0x2d0[168.862935] driver_unregister+0x71/0xb0[168.862939] pci_unregister_driver+0x30/0x230[168.862944] mt7921_pci_driver_exit+0x10/0x1b [mt7921e][168.862949] __x64_sys_delete_module+0x2f9/0x4b0[168.862968] do_syscall_64+0x38/0x90[168.862973] entry_SYSCALL_64_after_hwframe+0x63/0xcdTest steps:1. insmode2. do not ifup3. rmmod quickly (within 1 second)
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: An array indexing vulnerability was found in the netfilter subsystem of the Linux kernel. A missing macro could lead to a miscalculation of the `h->nets` array offset, providing attackers with the primitive to arbitrarily increment/decrement a memory buffer out-of-bound. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211_hwsim: Fix possible NULL dereferenceIn a call to mac80211_hwsim_select_tx_link() the sta pointer mightbe NULL, thus need to check that it is not NULL before accessing it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:jfs: jfs_dmap: Validate db_l2nbperpage while mountingIn jfs_dmap.c at line 381, BLKTODMAP is used to get a logical blocknumber inside dbFree(). db_l2nbperpage, which is the log2 number ofblocks per page, is passed as an argument to BLKTODMAP which uses itfor shifting.Syzbot reported a shift out-of-bounds crash because db_l2nbperpage istoo big. This happens because the large value is set without anyvalidation in dbMount() at line 181.Thus, make sure that db_l2nbperpage is correct while mounting.Max number of blocks per page = Page size / Min block size=> log2(Max num_block per page) = log2(Page size / Min block size) = log2(Page size) - log2(Min block size)=> Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: use RCU for hci_conn_params and iterate safely in hci_synchci_update_accept_list_sync iterates over hdev->pend_le_conns andhdev->pend_le_reports, and waits for controller events in the loop body,without holding hdev lock.Meanwhile, these lists and the items may be modified e.g. byle_scan_cleanup. This can invalidate the list cursor or any other itemin the list, resulting to invalid behavior (eg use-after-free).Use RCU for the hci_conn_params action lists. Since the loop bodies inhci_sync block and we cannot use RCU or hdev->lock for the whole loop,copy list items first and then iterate on the copy. Only the flags fieldis written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee weread valid values.Free params everywhere with hci_conn_params_free so the cleanup isguaranteed to be done properly.This fixes the following, which can be triggered e.g. by BlueZ newmgmt-tester case "Add + Remove Device Nowait - Success", or by changinghci_le_set_cig_params to always return false, and running iso-tester:==================================================================BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014Workqueue: hci0 hci_cmd_sync_workCall Trace:dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)kasan_report (mm/kasan/report.c:538)? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)? mutex_lock (kernel/locking/mutex.c:282)? __pfx_mutex_lock (kernel/locking/mutex.c:282)? __pfx_mutex_unlock (kernel/locking/mutex.c:538)? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)? __pfx_worker_thread (kernel/workqueue.c:2480)kthread (kernel/kthread.c:376)? __pfx_kthread (kernel/kthread.c:331)ret_from_fork (arch/x86/entry/entry_64.S:314)Allocated by task 31:kasan_save_stack (mm/kasan/common.c:46)kasan_set_track (mm/kasan/common.c:52)__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)hci_connect_cis (net/bluetooth/hci_conn.c:2266)iso_connect_cis (net/bluetooth/iso.c:390)iso_sock_connect (net/bluetooth/iso.c:899)__sys_connect (net/socket.c:2003 net/socket.c:2020)__x64_sys_connect (net/socket.c:2027)do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)Freed by task 15:kasan_save_stack (mm/kasan/common.c:46)kasan_set_track (mm/kasan/common.c:52)kasan_save_free_info (mm/kasan/generic.c:523)__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)hci_conn_params_del (net/bluetooth/hci_core.c:2323)le_scan_cleanup (net/bluetooth/hci_conn.c:202)process_one_work (./arch/x86/include/asm/preempt.---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_createWe can't simply free the connector after calling drm_connector_init on it.We need to clean up the drm side first.It might not fix all regressions from commit 2b5d1c29f6c4("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),but at least it fixes a memory corruption in error handling related tothat commit.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211_hwsim: drop short framesWhile technically some control frames like ACK are shorter andend after Address 1, such frames shouldn't be forwarded throughwmediumd or similar userspace, so require the full 3-addressheader to avoid accessing invalid memory if shorter frames arepassed in.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ACPICA: Add AML_NO_OPERAND_RESOLVE flag to TimerACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.=============================================================UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]'CPU: 37 PID: 1678 Comm: cat Not tainted6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64kHW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace: dump_backtrace+0xe0/0x130 show_stack+0x20/0x60 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 ubsan_epilogue+0x10/0x50 __ubsan_handle_out_of_bounds+0x80/0x90 acpi_ds_exec_end_op+0x1bc/0x6d8 acpi_ps_parse_loop+0x57c/0x618 acpi_ps_parse_aml+0x1e0/0x4b4 acpi_ps_execute_method+0x24c/0x2b8 acpi_ns_evaluate+0x3a8/0x4bc acpi_evaluate_object+0x15c/0x37c acpi_evaluate_integer+0x54/0x15c show_power+0x8c/0x12c [acpi_power_meter]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: Fix hci_suspend_sync crashIf hci_unregister_dev() frees the hci_dev object but hci_suspend_notifiermay still be accessing it, it can cause the program to crash.Here's the call trace: <4>[102152.653246] Call Trace: <4>[102152.653254] hci_suspend_sync+0x109/0x301 [bluetooth] <4>[102152.653259] hci_suspend_dev+0x78/0xcd [bluetooth] <4>[102152.653263] hci_suspend_notifier+0x42/0x7a [bluetooth] <4>[102152.653268] notifier_call_chain+0x43/0x6b <4>[102152.653271] __blocking_notifier_call_chain+0x48/0x69 <4>[102152.653273] __pm_notifier_call_chain+0x22/0x39 <4>[102152.653276] pm_suspend+0x287/0x57c <4>[102152.653278] state_store+0xae/0xe5 <4>[102152.653281] kernfs_fop_write+0x109/0x173 <4>[102152.653284] __vfs_write+0x16f/0x1a2 <4>[102152.653287] ? selinux_file_permission+0xca/0x16f <4>[102152.653289] ? security_file_permission+0x36/0x109 <4>[102152.653291] vfs_write+0x114/0x21d <4>[102152.653293] __x64_sys_write+0x7b/0xdb <4>[102152.653296] do_syscall_64+0x59/0x194 <4>[102152.653299] entry_SYSCALL_64_after_hwframe+0x5c/0xc1This patch holds the reference count of the hci_dev object whileprocessing it in hci_suspend_notifier to avoid potential crashcaused by the race condition.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw88: delete timer and free skb queue when unloadingFix possible crash and memory leak on driver unload by deletingTX purge timer and freeing C2H queue in 'rtw_core_deinit()',shrink critical section in the latter by freeing COEX queueout of TX report lock scope.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iavf: Fix out-of-bounds when setting channels on removeIf we set channels greater during iavf_remove(), and waiting reset donewould be timeout, then returned with error but changed num_active_queuesdirectly, that will lead to OOB like the following logs. Because thenum_active_queues is greater than tx/rx_rings[] allocated actually.Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) waitResult:[ 3506.152887] iavf 0000:41:02.0: Removing device[ 3510.400799] ==================================================================[ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf][ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536[ 3510.400823][ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1[ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021[ 3510.400835] Call Trace:[ 3510.400851] dump_stack+0x71/0xab[ 3510.400860] print_address_description+0x6b/0x290[ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf][ 3510.400868] kasan_report+0x14a/0x2b0[ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf][ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf][ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf][ 3510.400891] ? wait_woken+0x1d0/0x1d0[ 3510.400895] ? notifier_call_chain+0xc1/0x130[ 3510.400903] pci_device_remove+0xa8/0x1f0[ 3510.400910] device_release_driver_internal+0x1c6/0x460[ 3510.400916] pci_stop_bus_device+0x101/0x150[ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20[ 3510.400924] pci_iov_remove_virtfn+0x187/0x420[ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10[ 3510.400929] ? pci_get_subsys+0x90/0x90[ 3510.400932] sriov_disable+0xed/0x3e0[ 3510.400936] ? bus_find_device+0x12d/0x1a0[ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e][ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e][ 3510.400968] ? pci_get_device+0x7c/0x90[ 3510.400970] ? pci_get_subsys+0x90/0x90[ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210[ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10[ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e][ 3510.401001] sriov_numvfs_store+0x214/0x290[ 3510.401005] ? sriov_totalvfs_show+0x30/0x30[ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10[ 3510.401011] ? __check_object_size+0x15a/0x350[ 3510.401018] kernfs_fop_write+0x280/0x3f0[ 3510.401022] vfs_write+0x145/0x440[ 3510.401025] ksys_write+0xab/0x160[ 3510.401028] ? __ia32_sys_read+0xb0/0xb0[ 3510.401031] ? fput_many+0x1a/0x120[ 3510.401032] ? filp_close+0xf0/0x130[ 3510.401038] do_syscall_64+0xa0/0x370[ 3510.401041] ? page_fault+0x8/0x30[ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca[ 3510.401073] RIP: 0033:0x7f3a9bb842c0[ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_event: call disconnect callback before deleting connIn hci_cs_disconnect, we do hci_conn_del even if disconnection failed.ISO, L2CAP and SCO connections refer to the hci_conn withouthci_conn_get, so disconn_cfm must be called so they can clean up theirconn, otherwise use-after-free occurs.ISO:==========================================================iso_sock_connect:880: sk 00000000eabd6557iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da...iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073hci_dev_put:1487: hci0 orig refcnt 17__iso_chan_add:214: conn 00000000b6251073iso_sock_clear_timer:117: sock 00000000eabd6557 state 3...hci_rx_work:4085: hci0 Event packethci_event_packet:7601: hci0: event 0x0fhci_cmd_status_evt:4346: hci0: opcode 0x0406hci_cs_disconnect:2760: hci0: status 0x0chci_sent_cmd_data:3107: hci0 opcode 0x0406hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560hci_conn_unlink:1102: hci0: hcon 000000001696f1fdhci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2hci_chan_list_flush:2780: hcon 000000001696f1fdhci_dev_put:1487: hci0 orig refcnt 21hci_dev_put:1487: hci0 orig refcnt 20hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c... ...iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557BUG: kernel NULL pointer dereference, address: 0000000000000668PGD 0 P4D 0Oops: 0000 [#1] PREEMPT SMP PTIHardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth==========================================================L2CAP:==================================================================hci_cmd_status_evt:4359: hci0: opcode 0x0406hci_cs_disconnect:2760: hci0: status 0x0chci_sent_cmd_data:3085: hci0 opcode 0x0406hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585hci_conn_unlink:1102: hci0: hcon ffff88800c999000hci_chan_list_flush:2780: hcon ffff88800c999000hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280...BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth]Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ #2Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014Call Trace: dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0xf8/0x180 ? hci_send_acl+0x2d/0x540 [bluetooth] kasan_report+0xa8/0xe0 ? hci_send_acl+0x2d/0x540 [bluetooth] hci_send_acl+0x2d/0x540 [bluetooth] ? __pfx___lock_acquire+0x10/0x10 l2cap_chan_send+0x1fd/0x1300 [bluetooth] ? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth] ? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth] ? lock_release+0x1d5/0x3c0 ? mark_held_locks+0x1a/0x90 l2cap_sock_sendmsg+0x100/0x170 [bluetooth] sock_write_iter+0x275/0x280 ? __pfx_sock_write_iter+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 do_iter_readv_writev+0x176/0x220 ? __pfx_do_iter_readv_writev+0x10/0x10 ? find_held_lock+0x83/0xa0 ? selinux_file_permission+0x13e/0x210 do_iter_write+0xda/0x340 vfs_writev+0x1b4/0x400 ? __pfx_vfs_writev+0x10/0x10 ? __seccomp_filter+0x112/0x750 ? populate_seccomp_data+0x182/0x220 ? __fget_light+0xdf/0x100 ? do_writev+0x19d/0x210 do_writev+0x19d/0x210 ? __pfx_do_writev+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0x60/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 ? do_syscall_64+0x6c/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 entry_SYSCALL_64_after_hwframe+0x72/0xdcRIP: 0033:0x7ff45cb23e64Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014RAX: ffffffffffffffda RBX: ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: The module will parse a
node which is not a child of a structural node. The node will be deleted after creation but might be accessed later leading to a use after free.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libQt5Svg5 > 0-0 (version in image is 5.15.12+kde6-150600.1.6).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: Fix vmalloc out-of-bounds write in fast_imageblitThis issue triggers when a userspace program does an ioctlFBIOPUT_CON2FBMAP by passing console number and frame buffer number.Ideally this maps console to frame buffer and updates the screen ifconsole is visible.As part of mapping it has to do resize of console according to framebuffer info. if this resize fails and returns from vc_do_resize() andcontinues further. At this point console and new frame buffer are mappedand sets display vars. Despite failure still it continue to proceedupdating the screen at later stages where vc_data is related to previousframe buffer and frame buffer info and display vars are mapped to newframe buffer and eventully leading to out-of-bounds write infast_imageblit(). This bheviour is excepted only when fg_console isequal to requested console which is a visible console and updates screenwith invalid struct references in fbcon_putcs().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:jfs: upper bound check of tree index in dbAllocAGWhen computing the tree index in dbAllocAG, we never check if we areout of bounds realative to the size of the stree.This could happen in a scenario where the filesystem metadata arecorrupted.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:jfs: Regular file corruption checkThe reproducer builds a corrupted file on disk with a negative i_size value.Add a check when opening this file to avoid subsequent operation failures.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA: hfi1: fix possible divide-by-zero in find_hw_thread_mask()The function divides number of online CPUs by num_core_siblings, andlater checks the divider by zero. This implies a possibility to getand divide-by-zero runtime error. Fix it by moving the check prior todivision. This also helps to save one indentation level.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:jfs: truncate good inode pages when hard link is 0The fileset value of the inode copy from the disk by the reproducer isAGGR_RESERVED_I. When executing evict, its hard link number is 0, so itsinode pages are not truncated. This causes the bugon to be triggered whenexecuting clear_inode() because nrpages is greater than 0.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath12k: Correct tid cleanup when tid setup failsCurrently, if any error occurs during ath12k_dp_rx_peer_tid_setup(),the tid value is already incremented, even though the correspondingTID is not actually allocated. Proceed toath12k_dp_rx_peer_tid_delete() starting from unallocated tid,which might leads to freeing unallocated TID and cause potentialcrash or out-of-bounds access.Hence, fix by correctly decrementing tid before cleanup to match onlythe successfully allocated TIDs.Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(),as decrementing the tid before cleanup in loop will take care of this.Compile tested only.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath12k: Decrement TID on RX peer frag setup error handlingCurrently, TID is not decremented before peer cleanup, during errorhandling path of ath12k_dp_rx_peer_frag_setup(). This could lead toout-of-bounds access in peer->rx_tid[].Hence, add a decrement operation for TID, before peer cleanup toensures proper cleanup and prevents out-of-bounds access issues whenthe RX peer frag setup fails.Found during code review. Compile tested only.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: rose: convert 'use' field to refcount_tThe 'use' field in struct rose_neigh is used as a reference counter butlacks atomicity. This can lead to race conditions where a rose_neighstructure is freed while still being referenced by other code paths.For example, when rose_neigh->use becomes zero during an ioctl operationvia rose_rt_ioctl(), the structure may be removed while its timer isstill active, potentially causing use-after-free issues.This patch changes the type of 'use' from unsigned short to refcount_t andupdates all code paths to use rose_neigh_hold() and rose_neigh_put() whichoperate reference counts atomically.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/ivpu: Prevent recovery work from being queued during device removalUse disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini()to ensure that no new recovery work items can be queued after deviceremoval has started. Previously, recovery work could be scheduled evenafter canceling existing work, potentially leading to use-after-freebugs if recovery accessed freed resources.Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to betterreflect its new behavior.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: add validation for ring_len paramThe `ring_len` parameter provided by the virtual function (VF)is assigned directly to the hardware memory context (HMC) withoutany validation.To address this, introduce an upper boundary check for both Tx and Rxqueue lengths. The maximum number of descriptors supported by thehardware is 8k-32.Additionally, enforce alignment constraints: Tx rings must be a multipleof 8, and Rx rings must be a multiple of 32.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:futex: Prevent use-after-free during requeue-PIsyzbot managed to trigger the following race: T1 T2 futex_wait_requeue_pi() futex_do_wait() schedule() futex_requeue() futex_proxy_trylock_atomic() futex_requeue_pi_prepare() requeue_pi_wake_futex() futex_requeue_pi_complete() /* preempt */ * timeout/ signal wakes T1 * futex_requeue_pi_wakeup_sync() // Q_REQUEUE_PI_LOCKED futex_hash_put() // back to userland, on stack futex_q is garbage /* back */ wake_up_state(q->task, TASK_NORMAL);In this scenario futex_wait_requeue_pi() is able to leave without usingfutex_q::lock_ptr for synchronization.This can be prevented by reading futex_q::task before updating thefutex_q::requeue_state. A reference on the task_struct is not neededbecause requeue_pi_wake_futex() is invoked with a spinlock_t held whichimplies a RCU read section.Even if T1 terminates immediately after, the task_struct will remain validduring T2's wake_up_state(). A READ_ONCE on futex_q::task beforefutex_requeue_pi_complete() is enough because it ensures that the variableis read before the state is updated.Read futex_q::task before updating the requeue state, use it for thefollowing wakeup.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: Fix possible UAFsThis attemps to fix possible UAFs caused by struct mgmt_pending beingfreed while still being processed like in the following trace, in orderto fix mgmt_pending_valid is introduce and use to check if themgmt_pending hasn't been removed from the pending list, on the completecallbacks it is used to check and in addtion remove the cmd from the listwhile holding mgmt_pending_lock to avoid TOCTOU problems since if the cmdis left on the list it can still be accessed and freed.BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223Read of size 8 at addr ffff8880709d4dc0 by task kworker/u11:0/55CPU: 0 UID: 0 PID: 55 Comm: kworker/u11:0 Not tainted 6.16.4 #2 PREEMPT(full)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014Workqueue: hci0 hci_cmd_sync_workCall Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x711/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16.4/arch/x86/entry/entry_64.S:245 Allocated by task 12210: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4364 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] mgmt_pending_new+0x65/0x1e0 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296 __add_adv_patterns_monitor+0x130/0x200 net/bluetooth/mgmt.c:5247 add_adv_patterns_monitor+0x214/0x360 net/bluetooth/mgmt.c:5364 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 sock_write_iter+0x258/0x330 net/socket.c:1133 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fFreed by task 12221: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4648 [inline] kfree+0x18e/0x440 mm/slub.c:4847 mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline] mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257 __mgmt_power_off+0x169/0x350 net/bluetooth/mgmt.c:9444 hci_dev_close_sync+0x754/0x1330 net/bluetooth/hci_sync.c:5290 hci_dev_do_close net/bluetooth/hci_core.c:501 [inline] hci_dev_close+0x108/0x200 net/bluetooth/hci_core.c:526 sock_do_ioctl+0xd9/0x300 net/socket.c:1192 sock_ioctl+0x576/0x790 net/socket.c:1313 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipvs: Defer ip_vs_ftp unregister during netns cleanupOn the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftpbefore connections with valid cp->app pointers are flushed, leading to ause-after-free.Fix this by introducing a global `exiting_module` flag, set to true inip_vs_ftp_exit() before unregistering the pernet subsystem. In__ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netnscleanup (when exiting_module is false) and defer it to__ip_vs_cleanup_batch(), which unregisters all apps after all connectionsare flushed. If called during module exit, unregister ip_vs_ftpimmediately.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: essiv - Check ssize for decryption and in-place encryptionMove the ssize check to the start in essiv_aead_crypt so thatit's also checked for decryption and in-place encryption.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xsk: Harden userspace-supplied xdp_desc validationTurned out certain clearly invalid values passed in xdp_desc fromuserspace can pass xp_{,un}aligned_validate_desc() and then leadto UBs or just invalid frames to be queued for xmit.desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_lencan cause positive integer overflow and wraparound, the same way lowenough desc->addr with a non-zero pool->tx_metadata_len can causenegative integer overflow. Both scenarios can then pass thevalidation successfully.This doesn't happen with valid XSk applications, but can be usedto perform attacks.Always promote desc->len to ``u64`` first to exclude positiveoverflows of it. Use explicit check_{add,sub}_overflow() whenvalidating desc->addr (which is ``u64`` already).bloat-o-meter reports a little growth of the code size:add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44)Function old new deltaxskq_cons_peek_desc 299 330 +31xsk_tx_peek_release_desc_batch 973 1002 +29xsk_generic_xmit 3148 3132 -16but hopefully this doesn't hurt the performance much.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tls: wait for pending async decryptions if tls_strp_msg_hold failsAsync decryption calls tls_strp_msg_hold to create a clone of theinput skb to hold references to the memory it uses. If we fail toallocate that clone, proceeding with async decryption can lead tovarious issues (UAF on the skb, writing into userspace memory afterthe recv() call has returned).In this case, wait for all pending decryption requests.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: Don't call reqsk_fastopen_remove() in tcp_conn_request().syzbot reported the splat below in tcp_conn_request(). [0]If a listener is close()d while a TFO socket is being processed intcp_conn_request(), inet_csk_reqsk_queue_add() does not set reqsk->skand calls inet_child_forget(), which calls tcp_disconnect() for theTFO socket.After the cited commit, tcp_disconnect() calls reqsk_fastopen_remove(),where reqsk_put() is called due to !reqsk->sk.Then, reqsk_fastopen_remove() in tcp_conn_request() decrements thelast req->rsk_refcnt and frees reqsk, and __reqsk_free() at thedrop_and_free label causes the refcount underflow for the listenerand double-free of the reqsk.Let's remove reqsk_fastopen_remove() in tcp_conn_request().Note that other callers make sure tp->fastopen_rsk is not NULL.[0]:refcount_t: underflow; use-after-free.WARNING: CPU: 12 PID: 5563 at lib/refcount.c:28 refcount_warn_saturate (lib/refcount.c:28)Modules linked in:CPU: 12 UID: 0 PID: 5563 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025RIP: 0010:refcount_warn_saturate (lib/refcount.c:28)Code: ab e8 8e b4 98 ff 0f 0b c3 cc cc cc cc cc 80 3d a4 e4 d6 01 00 75 9c c6 05 9b e4 d6 01 01 48 c7 c7 e8 df fb ab e8 6a b4 98 ff <0f> 0b e9 03 5b 76 00 cc 80 3d 7d e4 d6 01 00 0f 85 74 ff ff ff c6RSP: 0018:ffffa79fc0304a98 EFLAGS: 00010246RAX: d83af4db1c6b3900 RBX: ffff9f65c7a69020 RCX: d83af4db1c6b3900RDX: 0000000000000000 RSI: 00000000ffff7fff RDI: ffffffffac78a280RBP: 000000009d781b60 R08: 0000000000007fff R09: ffffffffac6ca280R10: 0000000000017ffd R11: 0000000000000004 R12: ffff9f65c7b4f100R13: ffff9f65c7d23c00 R14: ffff9f65c7d26000 R15: ffff9f65c7a64ef8FS: 00007f9f962176c0(0000) GS:ffff9f65fcf00000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000200000000180 CR3: 000000000dbbe006 CR4: 0000000000372ef0Call Trace: tcp_conn_request (./include/linux/refcount.h:400 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 ./include/net/sock.h:1965 ./include/net/request_sock.h:131 net/ipv4/tcp_input.c:7301) tcp_rcv_state_process (net/ipv4/tcp_input.c:6708) tcp_v6_do_rcv (net/ipv6/tcp_ipv6.c:1670) tcp_v6_rcv (net/ipv6/tcp_ipv6.c:1906) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:438) ip6_input (net/ipv6/ip6_input.c:500) ipv6_rcv (net/ipv6/ip6_input.c:311) __netif_receive_skb (net/core/dev.c:6104) process_backlog (net/core/dev.c:6456) __napi_poll (net/core/dev.c:7506) net_rx_action (net/core/dev.c:7569 net/core/dev.c:7696) handle_softirqs (kernel/softirq.c:579) do_softirq (kernel/softirq.c:480)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: delete x->tunnel as we delete xThe ipcomp fallback tunnels currently get deleted (from the variouslists and hashtables) as the last user state that needed that fallbackis destroyed (not deleted). If a reference to that user state stillexists, the fallback state will remain on the hashtables/lists,triggering the WARN in xfrm_state_fini. Because of those remainingreferences, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_statesynchronously on net exit path") is not complete.We recently fixed one such situation in TCP due to defered freeing ofskbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as wecurrently drop dst")). This can also happen due to IP reassembly: skbswith a secpath remain on the reassembly queue until netnsdestruction. If we can't guarantee that the queues are flushed by thetime xfrm_state_fini runs, there may still be references to a (user)xfrm_state, preventing the timely deletion of the correspondingfallback state.Instead of chasing each instance of skbs holding a secpath one by one,this patch fixes the issue directly within xfrm, by deleting thefallback state as soon as the last user state depending on it has beendeleted. Destruction will still happen when the final reference isdropped.A separate lockdep class for the fallback state is required sincewe're going to lock x->tunnel while x is locked.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: Fix unlikely race in gdlm_put_lockIn gdlm_put_lock(), there is a small window of time in which theDFL_UNMOUNT flag has been set but the lockspace hasn't been released,yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().To prevent it from dereferencing freed glock objects, only free theglock if the lockspace has actually been released.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fix race condition in mptcp_schedule_work()syzbot reported use-after-free in mptcp_schedule_work() [1]Issue here is that mptcp_schedule_work() schedules a work,then gets a refcount on sk->sk_refcnt if the work was scheduled.This refcount will be released by mptcp_worker().[A] if (schedule_work(...)) {[B] sock_hold(sk); return true; }Problem is that mptcp_worker() can run immediately and complete before [B]We need instead : sock_hold(sk); if (schedule_work(...)) return true; sock_put(sk);[1]refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25Call Trace: __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] sock_hold include/net/sock.h:816 [inline] mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943 mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316 call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747 expire_timers kernel/time/timer.c:1798 [inline] __run_timers kernel/time/timer.c:2372 [inline] __run_timer_base+0x648/0x970 kernel/time/timer.c:2384 run_timer_base kernel/time/timer.c:2393 [inline] run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0xcf/0x190 kernel/softirq.c:1138 smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tipc: Fix use-after-free in tipc_mon_reinit_self().syzbot reported use-after-free of tipc_net(net)->monitors[]in tipc_mon_reinit_self(). [0]The array is protected by RTNL, but tipc_mon_reinit_self()iterates over it without RTNL.tipc_mon_reinit_self() is called from tipc_net_finalize(),which is always under RTNL except for tipc_net_finalize_work().Let's hold RTNL in tipc_net_finalize_work().[0]:BUG: KASAN: slab-use-after-free in __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162Read of size 1 at addr ffff88805eae1030 by task kworker/0:7/5989CPU: 0 UID: 0 PID: 5989 Comm: kworker/0:7 Not tainted syzkaller #0 PREEMPT_{RT,(full)}Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025Workqueue: events tipc_net_finalize_workCall Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __kasan_check_byte+0x2a/0x40 mm/kasan/common.c:568 kasan_check_byte include/linux/kasan.h:399 [inline] lock_acquire+0x8d/0x360 kernel/locking/lockdep.c:5842 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162 rtlock_slowlock kernel/locking/rtmutex.c:1894 [inline] rwbase_rtmutex_lock_state kernel/locking/spinlock_rt.c:160 [inline] rwbase_write_lock+0xd3/0x7e0 kernel/locking/rwbase_rt.c:244 rt_write_lock+0x76/0x110 kernel/locking/spinlock_rt.c:243 write_lock_bh include/linux/rwlock_rt.h:99 [inline] tipc_mon_reinit_self+0x79/0x430 net/tipc/monitor.c:718 tipc_net_finalize+0x115/0x190 net/tipc/net.c:140 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3319 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3400 kthread+0x70e/0x8a0 kernel/kthread.c:463 ret_from_fork+0x439/0x7d0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Allocated by task 6089: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x1a8/0x320 mm/slub.c:4407 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] tipc_mon_create+0xc3/0x4d0 net/tipc/monitor.c:657 tipc_enable_bearer net/tipc/bearer.c:357 [inline] __tipc_nl_bearer_enable+0xe16/0x13f0 net/tipc/bearer.c:1047 __tipc_nl_compat_doit net/tipc/netlink_compat.c:371 [inline] tipc_nl_compat_doit+0x3bc/0x5f0 net/tipc/netlink_compat.c:393 tipc_nl_compat_handle net/tipc/netlink_compat.c:-1 [inline] tipc_nl_compat_recv+0x83c/0xbe0 net/tipc/netlink_compat.c:1321 genl_family_rcv_msg_doit+0x215/0x300 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x60e/0x790 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x846/0xa10 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:729 ____sys_sendmsg+0x508/0x820 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x1a1/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: bridge: fix use-after-free due to MST port state bypasssyzbot reported[1] a use-after-free when deleting an expired fdb. It isdue to a race condition between learning still happening and a port beingdeleted, after all its fdbs have been flushed. The port's state has beentoggled to disabled so no learning should happen at that time, but if wehave MST enabled, it will bypass the port's state, that together with VLANfiltering disabled can lead to fdb learning at a time when it shouldn'thappen while the port is being deleted. VLAN filtering must be disabledbecause we flush the port VLANs when it's being deleted which will stoplearning. This fix adds a check for the port's vlan group which isinitialized to NULL when the port is getting deleted, that avoids the portstate bypass. When MST is enabled there would be a minimal new overheadin the fast-path because the port's vlan group pointer is cache-hot.[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nvme-fc: use lock accessing port_state and rport statenvme_fc_unregister_remote removes the remote port on a lport object atany point in time when there is no active association. This races withwith the reconnect logic, because nvme_fc_create_association is nottaking a lock to check the port_state and atomically increase theactive count on the rport.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: fix potential use-after-free in have_mon_and_osd_map()The wait loop in __ceph_open_session() can race with the clientreceiving a new monmap or osdmap shortly after the initial map isreceived. Both ceph_monc_handle_map() and handle_one_map() installa new map immediately after freeing the old one kfree(monc->monmap); monc->monmap = monmap; ceph_osdmap_destroy(osdc->osdmap); osdc->osdmap = newmap;under client->monc.mutex and client->osdc.lock respectively, butbecause neither is taken in have_mon_and_osd_map() it's possible forclient->monc.monmap->epoch and client->osdc.osdmap->epoch arms in client->monc.monmap && client->monc.monmap->epoch && client->osdc.osdmap && client->osdc.osdmap->epoch;condition to dereference an already freed map. This happens to bereproducible with generic/395 and generic/397 with KASAN enabled: BUG: KASAN: slab-use-after-free in have_mon_and_osd_map+0x56/0x70 Read of size 4 at addr ffff88811012d810 by task mount.ceph/13305 CPU: 2 UID: 0 PID: 13305 Comm: mount.ceph Not tainted 6.14.0-rc2-build2+ #1266 ... Call Trace: have_mon_and_osd_map+0x56/0x70 ceph_open_session+0x182/0x290 ceph_get_tree+0x333/0x680 vfs_get_tree+0x49/0x180 do_new_mount+0x1a3/0x2d0 path_mount+0x6dd/0x730 do_mount+0x99/0xe0 __do_sys_mount+0x141/0x180 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 13305: ceph_osdmap_alloc+0x16/0x130 ceph_osdc_init+0x27a/0x4c0 ceph_create_client+0x153/0x190 create_fs_client+0x50/0x2a0 ceph_get_tree+0xff/0x680 vfs_get_tree+0x49/0x180 do_new_mount+0x1a3/0x2d0 path_mount+0x6dd/0x730 do_mount+0x99/0xe0 __do_sys_mount+0x141/0x180 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 9475: kfree+0x212/0x290 handle_one_map+0x23c/0x3b0 ceph_osdc_handle_map+0x3c9/0x590 mon_dispatch+0x655/0x6f0 ceph_con_process_message+0xc3/0xe0 ceph_con_v1_try_read+0x614/0x760 ceph_con_workfn+0x2de/0x650 process_one_work+0x486/0x7c0 process_scheduled_works+0x73/0x90 worker_thread+0x1c8/0x2a0 kthread+0x2ec/0x300 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30Rewrite the wait loop to check the above condition directly withclient->monc.mutex and client->osdc.lock taken as appropriate. Whileat it, improve the timeout handling (previously mount_timeout could beexceeded in case wait_event_interruptible_timeout() slept more thanonce) and access client->auth_err under client->monc.mutex to matchhow it's set in finish_auth().monmap_show() and osdmap_show() now take the respective lock beforeaccessing the map as well.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/panthor: Prevent potential UAF in group creationThis commit prevents the possibility of a use after free issue in theGROUP_CREATE ioctl function, which arose as pointer to the group isaccessed in that ioctl function after storing it in the Xarray.A malicious userspace can second guess the handle of a group and tryto call GROUP_DESTROY ioctl from another thread around the same timeas GROUP_CREATE ioctl.To prevent the use after free exploit, this commit uses a mark on anentry of group pool Xarray which is added just before returning fromthe GROUP_CREATE ioctl function. The mark is checked for all ioctlsthat specify the group handle and so userspace won't be abe to deletea group that isn't marked yet.v2: Add R-bs and fixes tags
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: phy: fsl-usb: Fix use-after-free in delayed work during device removalThe delayed work item otg_event is initialized in fsl_otg_conf() andscheduled under two conditions:1. When a host controller binds to the OTG controller.2. When the USB ID pin state changes (cable insertion/removal).A race condition occurs when the device is removed via fsl_otg_remove():the fsl_otg instance may be freed while the delayed work is still pendingor executing. This leads to use-after-free when the work functionfsl_otg_event() accesses the already freed memory.The problematic scenario:(detach thread) | (delayed work)fsl_otg_remove() | kfree(fsl_otg_dev) //FREE| fsl_otg_event() | og = container_of(...) //USE | og-> //USEFix this by calling disable_delayed_work_sync() in fsl_otg_remove()before deallocating the fsl_otg structure. This ensures the delayed workis properly canceled and completes execution prior to memory deallocation.This bug was identified through static analysis.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommu: disable SVA when CONFIG_X86 is setPatch series "Fix stale IOTLB entries for kernel address space", v7.This proposes a fix for a security vulnerability related to IOMMU SharedVirtual Addressing (SVA). In an SVA context, an IOMMU can cache kernelpage table entries. When a kernel page table page is freed andreallocated for another purpose, the IOMMU might still hold stale,incorrect entries. This can be exploited to cause a use-after-free orwrite-after-free condition, potentially leading to privilege escalation ordata corruption.This solution introduces a deferred freeing mechanism for kernel pagetable pages, which provides a safe window to notify the IOMMU toinvalidate its caches before the page is reused.This patch (of 8):In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardwareshares and walks the CPU's page tables. The x86 architecture maps thekernel's virtual address space into the upper portion of every process'spage table. Consequently, in an SVA context, the IOMMU hardware can walkand cache kernel page table entries.The Linux kernel currently lacks a notification mechanism for kernel pagetable changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual addressmappings. This can cause the IOMMU's internal caches to retain staleentries for kernel VA.Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise whenkernel page table pages are freed and later reallocated. The IOMMU couldmisinterpret the new data as valid page table entries. The IOMMU mightthen walk into attacker-controlled memory, leading to arbitrary physicalmemory DMA access or privilege escalation. This is also aWrite-After-Free issue, as the IOMMU will potentially continue to writeAccessed and Dirty bits to the freed memory while attempting to walk thestale page tables.Currently, SVA contexts are unprivileged and cannot access kernelmappings. However, the IOMMU will still walk kernel-only page tables allthe way down to the leaf entries, where it realizes the mapping is for thekernel and errors out. This means the IOMMU still caches theseintermediate page table entries, making the described vulnerability a realconcern.Disable SVA on x86 architecture until the IOMMU can receive notificationto flush the paging cache before freeing the CPU kernel page table pages.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: hns3: add VLAN id validation before usingCurrently, the VLAN id may be used without validation whenreceive a VLAN configuration mailbox from VF. The length ofvlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may causeout-of-bounds memory access once the VLAN id is bigger thanor equal to VLAN_N_VID.Therefore, VLAN id needs to be checked to ensure it is withinthe range of VLAN_N_VID.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:erspan: Initialize options_len before referencing options.The struct ip_tunnel_info has a flexible array member namedoptions that is protected by a counted_by(options_len)attribute.The compiler will use this information to enforce runtime boundschecking deployed by FORTIFY_SOURCE string helpers.As laid out in the GCC documentation, the counter must beinitialized before the first reference to the flexible arraymember.After scanning through the files that use struct ip_tunnel_infoand also refer to options or options_len, it appears the normalcase is to use the ip_tunnel_info_opts_set() helper.Said helper would initialize options_len properly before copyingdata into options, however in the GRE ERSPAN code a partialupdate is done, preventing the use of the helper function.Before this change the handling of ERSPAN traffic in GRE tunnelswould cause a kernel panic when the kernel is compiled withGCC 15+ and having FORTIFY_SOURCE configured:memcpy: detected buffer overflow: 4 byte write of buffer size 0Call Trace: __fortify_panic+0xd/0xf erspan_rcv.cold+0x68/0x83 ? ip_route_input_slow+0x816/0x9d0 gre_rcv+0x1b2/0x1c0 gre_rcv+0x8e/0x100 ? raw_v4_input+0x2a0/0x2b0 ip_protocol_deliver_rcu+0x1ea/0x210 ip_local_deliver_finish+0x86/0x110 ip_local_deliver+0x65/0x110 ? ip_rcv_finish_core+0xd6/0x360 ip_rcv+0x186/0x1a0Reported-at: https://launchpad.net/bugs/2129580
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: Crypt::Sodium::XS module versions prior to 0.000042, for Perl, include a vulnerable version of libsodiumlibsodium <= 1.0.20 or a version of libsodium released before December 30, 2025 contains a vulnerability documented as CVE-2025-69277 https://www.cve.org/CVERecord?id=CVE-2025-69277 .The libsodium vulnerability states:In atypical use cases involving certain custom cryptography or untrusted data to crypto_core_ed25519_is_valid_point, mishandles checks for whether an elliptic curve point is valid because it sometimes allows points that aren't in the main cryptographic group.0.000042 includes a version of libsodium updated to 1.0.20-stable, released January 3, 2026, which includes a fix for the vulnerability.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libsodium23 > 0-0 (version in image is 1.0.18-150000.4.8.1).
-
Description: [This CNA information record relates to multiple CVEs; thetext explains which aspects/vulnerabilities correspond to which CVE.]Some Viridian hypercalls can specify a mask of vCPU IDs as an input, inone of three formats. Xen has boundary checking bugs with all threeformats, which can cause out-of-bounds reads and writes while processingthe inputs. * CVE-2025-58147. Hypercalls using the HV_VP_SET Sparse format can cause vpmask_set() to write out of bounds when converting the bitmap to Xen's format. * CVE-2025-58148. Hypercalls using any input format can cause send_ipi() to read d->vcpu[] out-of-bounds, and operate on a wild vCPU pointer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- xen-libs < 4.20.1_06-150700.3.14.1 (version in image is 4.20.1_04-150700.3.11.1).
-
Description: [This CNA information record relates to multiple CVEs; thetext explains which aspects/vulnerabilities correspond to which CVE.]Some Viridian hypercalls can specify a mask of vCPU IDs as an input, inone of three formats. Xen has boundary checking bugs with all threeformats, which can cause out-of-bounds reads and writes while processingthe inputs. * CVE-2025-58147. Hypercalls using the HV_VP_SET Sparse format can cause vpmask_set() to write out of bounds when converting the bitmap to Xen's format. * CVE-2025-58148. Hypercalls using any input format can cause send_ipi() to read d->vcpu[] out-of-bounds, and operate on a wild vCPU pointer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- xen-libs < 4.20.1_06-150700.3.14.1 (version in image is 4.20.1_04-150700.3.11.1).
-
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to version 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_do_quantize function when processing PNG files with malformed palette indices. The vulnerability occurs when palette_lookup array bounds are not validated against externally-supplied image data, allowing an attacker to craft a PNG file with out-of-range palette indices that trigger out-of-bounds memory access. This issue has been patched in version 1.6.51.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpng12-0 < 1.2.57-150000.4.3.1 (version in image is 1.2.57-2.18).
-
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_write_image_8bit function when processing 8-bit images through the simplified write API with convert_to_8bit enabled. The vulnerability affects 8-bit grayscale+alpha, RGB/RGBA, and images with incomplete row data. A conditional guard incorrectly allows 8-bit input to enter code expecting 16-bit input, causing reads up to 2 bytes beyond allocated buffer boundaries. This issue has been patched in version 1.6.51.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpng16-16 < 1.6.40-150600.3.3.1 (version in image is 1.6.40-150600.1.3).
-
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, an out-of-bounds read vulnerability exists in png_image_read_composite when processing palette images with PNG_FLAG_OPTIMIZE_ALPHA enabled. The palette compositing code in png_init_read_transformations incorrectly applies background compositing during premultiplication, violating the invariant component ≤ alpha x 257 required by the simplified PNG API. This issue has been patched in version 1.6.51.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpng16-16 < 1.6.40-150600.3.3.1 (version in image is 1.6.40-150600.1.3).
-
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, there is a heap buffer overflow vulnerability in the libpng simplified API function png_image_finish_read when processing 16-bit interlaced PNGs with 8-bit output format. Attacker-crafted interlaced PNG files cause heap writes beyond allocated buffer bounds. This issue has been patched in version 1.6.51.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpng16-16 < 1.6.40-150600.3.3.1 (version in image is 1.6.40-150600.1.3).
-
Description: OpenLDAP Lightning Memory-Mapped Database (LMDB) versions up to and including 0.9.14, prior to commit 8e1fda8, contain a heap buffer underflow in the readline() function of mdb_load. When processing malformed input containing an embedded NUL byte, an unsigned offset calculation can underflow and cause an out-of-bounds read of one byte before the allocated heap buffer. This can cause mdb_load to crash, leading to a limited denial-of-service condition.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libldap-2_4-2 > 0-0 (version in image is 2.4.46-150600.23.21).
-
Description: LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.6.26 to 1.6.53, there is an integer truncation in the libpng simplified write API functions png_write_image_16bit and png_write_image_8bit causes heap buffer over-read when the caller provides a negative row stride (for bottom-up image layouts) or a stride exceeding 65535 bytes. The bug was introduced in libpng 1.6.26 (October 2016) by casts added to silence compiler warnings on 16-bit systems. This vulnerability is fixed in 1.6.54.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpng16-16 > 0-0 (version in image is 1.6.40-150600.1.3).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iputDuring unmount process of nilfs2, nothing holds nilfs_root structure afternilfs2 detaches its writer in nilfs_detach_log_writer(). Previously,nilfs_evict_inode() could cause use-after-free read for nilfs_root ifinodes are left in "garbage_list" and released by nilfs_dispose_list atthe end of nilfs_detach_log_writer(), and this bug was fixed by commit9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root innilfs_evict_inode()").However, it turned out that there is another possibility of UAF in thecall path where mark_inode_dirty_sync() is called from iput():nilfs_detach_log_writer() nilfs_dispose_list() iput() mark_inode_dirty_sync() __mark_inode_dirty() nilfs_dirty_inode() __nilfs_mark_inode_dirty() nilfs_load_inode_block() --> causes UAF of nilfs_root structThis can happen after commit 0ae45f63d4ef ("vfs: add support for alazytime mount option"), which changed iput() to callmark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIMEflag and i_nlink is non-zero.This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirtydata after degenerating to read-only") when using the syzbot reproducer,but the issue has potentially existed before.Fix this issue by adding a "purging flag" to the nilfs structure, settingthat flag while disposing the "garbage_list" and checking it in__nilfs_mark_inode_dirty().Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_rootin nilfs_evict_inode()"), this patch does not rely on ns_writer todetermine whether to skip operations, so as not to break recovery onmount. The nilfs_salvage_orphan_logs routine dirties the buffer ofsalvaged data before attaching the log writer, so changing__nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULLwill cause recovery write to fail. The purpose of using the cleanup-onlyflag is to allow for narrowing of such conditions.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm/dp: Free resources after unregistering themThe DP component's unbind operation walks through the submodules tounregister and clean things up. But if the unbind happens because the DPcontroller itself is being removed, all the memory for those submoduleshas just been freed.Change the order of these operations to avoid the many use-after-freethat otherwise happens in this code path.Patchwork: https://patchwork.freedesktop.org/patch/542166/
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:lwt: Fix return values of BPF xmit opsBPF encap ops can return different types of positive values, such likeNET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from functionskb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such returnvalues would be treated implicitly as LWTUNNEL_XMIT_CONTINUE inip(6)_finish_output2. When this happens, skbs that have been freed wouldcontinue to the neighbor subsystem, causing use-after-free bug andkernel crashes.To fix the incorrect behavior, skb_do_redirect return values can besimply discarded, the same as tc-egress behavior. On the other hand,bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTUinformation. Thus convert its return values to avoid the conflict withLWTUNNEL_XMIT_CONTINUE.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:virtio-mmio: don't break lifecycle of vm_devvm_dev has a separate lifecycle because it has a 'struct device'embedded. Thus, having a release callback for it is correct.Allocating the vm_dev struct with devres totally breaks this protection,though. Instead of waiting for the vm_dev release callback, the memoryis freed when the platform_device is removed. Resulting in ause-after-free when finally the callback is to be called.To easily see the problem, compile the kernel withCONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.The fix is easy, don't use devres in this case.Found during my research about object lifetime problems.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: conntrack: Avoid nf_ct_helper_hash uses after freeIf nf_conntrack_init_start() fails (for example due to aregister_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini()clean-up path frees the nf_ct_helper_hash map.When built with NF_CONNTRACK=y, further netfilter modules (e.g:netfilter_conntrack_ftp) can still be loaded and callnf_conntrack_helpers_register(), independently of whether nf_conntrackinitialized correctly. This accesses the nf_ct_helper_hash danglingpointer and causes a uaf, possibly leading to random memory corruption.This patch guards nf_conntrack_helper_register() from accessing a freedor uninitialized nf_ct_helper_hash pointer and fixes possibleuses-after-free when loading a conntrack module.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: The imaplib module, when passed a user-controlled command, can have additional commands injected using newlines. Mitigation rejects commands containing control characters.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.97.2).
-
Description: The poplib module, when passed a user-controlled command, can haveadditional commands injected using newlines. Mitigation rejects commandscontaining control characters.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.97.2).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mlxsw: spectrum_router: Fix neighbour use-after-freeWe sometimes observe use-after-free when dereferencing a neighbour [1].The problem seems to be that the driver stores a pointer to theneighbour, but without holding a reference on it. A reference is onlytaken when the neighbour is used by a nexthop.Fix by simplifying the reference counting scheme. Always take areference when storing a neighbour pointer in a neighbour entry. Avoidtaking a referencing when the neighbour is used by a nexthop as theneighbour entry associated with the nexthop already holds a reference.Tested by running the test that uncovered the problem over 300 times.Without this patch the problem was reproduced after a handful ofiterations.[1]BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x2d4/0x310Read of size 8 at addr ffff88817f8e3420 by task ip/3929CPU: 3 UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full)Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023Call Trace: dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110 mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510 mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0 __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0 mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150 call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210 netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0 do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90 netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90 __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53[...]Allocated by task 109: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90 mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960 mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0 mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0 mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20Freed by task 154: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260 kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20Last potentially related work creation: kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0 mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:HID: multitouch: Correct devm device reference for hidinput input_dev nameReference the HID device rather than the input device for the devmallocation of the input_dev name. Referencing the input_dev would lead to ause-after-free when the input_dev was unregistered and subsequently fires auevent that depends on the name. At the point of firing the uevent, thename would be freed by devres management.Use devm_kasprintf to simplify the logic for allocating memory andformatting the input_dev name string.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hsr: Fix uninit-value access in fill_frame_info()Syzbot reports the following uninit-value access problem.=====================================================BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline]BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 fill_frame_info net/hsr/hsr_forward.c:601 [inline] hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560 __dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:644 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82It is because VLAN not yet supported in hsr driver. Return errorwhen protocol is ETH_P_8021Q in fill_frame_info() now to fix it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmountsyzbot found an invalid-free in diUnmount:BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline]BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674Free of addr ffff88806f410000 by task syz-executor131/3632 CPU: 0 PID: 3632 Comm: syz-executor131 Not tainted 6.1.0-rc7-syzkaller-00012-gca57f02295f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:460 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3674 diUnmount+0xef/0x100 fs/jfs/jfs_imap.c:195 jfs_umount+0x108/0x370 fs/jfs/jfs_umount.c:63 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1428 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1186 task_work_run+0x243/0x300 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x664/0x2070 kernel/exit.c:820 do_group_exit+0x1fd/0x2b0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:959 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd[...]JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount.If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount().JFS_IP(ipimap)->i_imap will be freed once again.Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: Stack-based buffer overflow in libtasn1 version: v4.20.0. The function fails to validate the size of input data resulting in a buffer overflow in asn1_expend_octet_string.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libtasn1 > 0-0 (version in image is 4.13-150000.4.11.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.alCheck pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario. It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF inproc_get_inode()"). Followed by AI Viro's suggestion, fix it in samemanner.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: wilc1000: avoid buffer overflow in WID string configurationFix the following copy overflow warning identified by Smatch checker. drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame() error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537)This patch introduces size check before accessing the memory buffer.The checks are base on the WID type of received data from the firmware.For WID string configuration, the size limit is determined by individualelement size in 'struct wilc_cfg_str_vals' that is maintained in 'len' fieldof 'struct wilc_cfg_str'.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: xfrm_alloc_spi shouldn't use 0 as SPIx->id.spi == 0 means "no SPI assigned", but since commit94f39804d891 ("xfrm: Duplicate SPI Handling"), we now create statesand add them to the byspi list with this value.__xfrm_state_delete doesn't remove those states from the byspi list,since they shouldn't be there, and this shows up as a UAF the nexttime we go through the byspi list.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: fix idx validation in config queues msgEnsure idx is within range of active/initialized TCs when iterating overvf->ch[idx] in i40e_vc_config_queues_msg().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: The CNI portmap plugin allows containers to emulate opening a host port, forwarding that traffic to the container. Versions 1.6.0 through 1.8.0 inadvertently forward all traffic with the same destination port as the host port when the portmap plugin is configured with the nftables backend, thus ignoring the destination IP. This includes traffic not intended for the node itself, i.e. traffic to containers hosted on the node. Containers that request HostPort forwarding can intercept all traffic destined for that port. This requires that the portmap plugin be explicitly configured to use the nftables backend. This issue is fixed in version 1.9.0. To workaround, configure the portmap plugin to use the iptables backend. It does not have this vulnerability.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- docker > 0-0 (version in image is 28.3.3_ce-150000.230.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:team: Move team device type change at the end of team_port_addAttempting to add a port device that is already up will expectedly fail,but not before modifying the team device header_ops.In the case of the syzbot reproducer the gre0 device isalready in state UP when it attempts to add it as aport device of team0, this fails but before thatheader_ops->create of team0 is changed from eth_header to ipgre_headerin the call to team_dev_type_check_change.Later when we end up in ipgre_header() struct ip_tunnel* points to nonsenseas the private data of the device still holds a struct team.Example sequence of iproute2 commands to reproduce the hang/BUG():ip link add dev team0 type teamip link add dev gre0 type greip link set dev gre0 upip link set dev gre0 master team0ip link set dev team0 upping -I team0 1.1.1.1Move team_dev_type_check_change down where all other checks have passedas it changes the dev type with no way to restore it in caseone of the checks that follow it fail.Also make sure to preserve the origial mtu assignment: - If port_dev is not the same type as dev, dev takes mtu from port_dev - If port_dev is the same type as dev, port_dev takes mtu from devThis is done by adding a conditional before the call to dev_set_mtuto prevent it from assigning port_dev->mtu = dev->mtu and insteadletting team_dev_type_check_change assign dev->mtu = port_dev->mtu.The conditional is needed because the patch moves the call toteam_dev_type_check_change past dev_set_mtu.Testing: - team device driver in-tree selftests - Add/remove various devices as slaves of team device - syzbot
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: skip lock-range check on equal size to avoid size==0 underflowWhen size equals the current i_size (including 0), the code used to callcheck_lock_range(filp, i_size, size - 1, WRITE), which computes `size - 1`and can underflow for size==0. Skip the equal case.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: fix buffer validation by including null terminator size in EA lengthThe smb2_set_ea function, which handles Extended Attributes (EA),was performing buffer validation checks that incorrectly omitted the sizeof the null terminating character (+1 byte) for EA Name.This patch fixes the issue by explicitly adding '+ 1' to EaNameLength wherethe null terminator is expected to be present in the buffer, ensuringthe validation accurately reflects the total required buffer size.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - zero initialize memory allocated via sock_kmallocSeveral crypto user API contexts and requests allocated withsock_kmalloc() were left uninitialized, relying on callers toset fields explicitly. This resulted in the use of uninitializeddata in certain error paths or when new fields are added in thefuture.The ACVP patches also contain two user-space interface files:algif_kpp.c and algif_akcipher.c. These too rely on properinitialization of their context structures.A particular issue has been observed with the newly added'inflight' variable introduced in af_alg_ctx by commit: 67b164a871af ("crypto: af_alg - Disallow multiple in-flight AIO requests")Because the context is not memset to zero after allocation,the inflight variable has contained garbage values. As a result,af_alg_alloc_areq() has incorrectly returned -EBUSY randomly whenthe garbage value was interpreted as true: https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209The check directly tests ctx->inflight without explicitlycomparing against true/false. Since inflight is only ever set totrue or false later, an uninitialized value has triggered-EBUSY failures. Zero-initializing memory allocated withsock_kmalloc() ensures inflight and other fields start in a knownstate, removing random issues caused by uninitialized data.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:firewire: net: fix use after free in fwnet_finish_incoming_packet()The netif_rx() function frees the skb so we can't dereference it tosave the skb->len.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Fix incomplete state save in rxe_requesterIf a send packet is dropped by the IP layer in rxe_requester()the call to rxe_xmit_packet() can fail with err == -EAGAIN.To recover, the state of the wqe is restored to the state beforethe packet was sent so it can be resent. However, the routinesthat save and restore the state miss a significnt part of thevariable state in the wqe, the dma struct which is used to processthrough the sge table. And, the state is not saved before the packetis built which modifies the dma struct.Under heavy stress testing with many QPs on a fast node sendinglarge messages to a slow node dropped packets are observed andthe resent packets are corrupted because the dma struct was notrestored. This patch fixes this behavior and allows the test casesto succeed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: reject auth/assoc to AP with our addressIf the AP uses our own address as its MLD address or BSSID, thenclearly something's wrong. Reject such connections so we don'ttry and fail later.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:soc: qcom: qmi_encdec: Restrict string length in decodeThe QMI TLV value for strings in a lot of qmi element info structuresaccount for null terminated strings with MAX_LEN + 1. If a string isactually MAX_LEN + 1 length, this will cause an out of bounds accesswhen the NULL character is appended in decoding.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: Unknown.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- curl < 8.14.1-150700.7.5.1 (version in image is 8.14.1-150700.7.2.1).
-
Description: When reading an HTTP response from a server, if no read amount is specified, the default behavior will be to use Content-Length. This allows a malicious server to cause the client to read large amounts of data into memory, potentially causing OOM or other DoS.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpython3_6m1_0 < 3.6.15-150300.10.103.1 (version in image is 3.6.15-150300.10.97.1).
-
Description: A flaw was found in glib. This vulnerability allows a heap buffer overflow and denial-of-service (DoS) via an integer overflow in GLib's GIO (GLib Input/Output) escape_byte_string() function when processing malicious file or remote filesystem attribute values.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glib2-tools < 2.78.6-150600.4.25.1 (version in image is 2.78.6-150600.4.16.1).
-
Description: User-controlled data URLs parsed by urllib.request.DataHandler allow injecting headers through newlines in the data URL mediatype.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.97.2).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: kvaser_pciefd: refine error prone echo_skb_max handling logicecho_skb_max should define the supported upper limit of echo_skb[]allocated inside the netdevice's priv. The corresponding size valueprovided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNTwhich is 17.But later echo_skb_max is rounded up to the nearest power of two (for themax case, that would be 32) and the tx/ack indices calculated furtherduring tx/rx may exceed the upper array boundary. Kasan reported this forthe ack case inside kvaser_pciefd_handle_ack_packet(), though the xmitfunction has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seqnumbers' generation that's not the case - we're free to calculate them aswould be more convenient, not taking tx max count into account. The onlydownside is that the size of echo_skb[] should correspond to the max seqnumber (not tx max count), so in some situations a bit more memory wouldbe consumed than could be.Thus make the size of the underlying echo_skb[] sufficient for the roundedmax tx value.Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: When passing through PCI devices, the detach logic in libxl won't removeaccess permissions to any 64bit memory BARs the device might have. As aresult a domain can still have access any 64bit memory BAR when suchdevice is no longer assigned to the domain.For PV domains the permission leak allows the domain itself to map the memoryin the page-tables. For HVM it would require a compromised device model orstubdomain to map the leaked memory into the HVM domain p2m.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- xen-libs < 4.20.2_02-150700.3.19.1 (version in image is 4.20.1_04-150700.3.11.1).
-
Description: Ruby WEBrick read_header HTTP Request Smuggling Vulnerability. This vulnerability allows remote attackers to smuggle arbitrary HTTP requests on affected installations of Ruby WEBrick. This issue is exploitable when the product is deployed behind an HTTP proxy that fulfills specific conditions.The specific flaw exists within the read_headers method. The issue results from the inconsistent parsing of terminators of HTTP headers. An attacker can leverage this vulnerability to smuggle arbitrary HTTP requests. Was ZDI-CAN-21876.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In 0.9-rc2 and earlier, avahi-daemon can be crashed by sending unsolicited announcements containing CNAME resource records pointing it to resource records with short TTLs. As soon as they expire avahi-daemon crashes.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.9.1).
-
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In 0.9-rc2 and earlier, avahi-daemon can be crashed by sending 2 unsolicited announcements with CNAME resource records 2 seconds apart.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.9.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/core: Check for the presence of LS_NLA_TYPE_DGID correctlyThe netlink response for RDMA_NL_LS_OP_IP_RESOLVE should always have aLS_NLA_TYPE_DGID attribute, it is invalid if it does not.Use the nl parsing logic properly and call nla_parse_deprecated() to fillthe nlattrs array and then directly index that array to get the data forthe DGID. Just fail if it is NULL.Remove the for loop searching for the nla, and squash the validation andparsing into one function.Fixes an uninitialized read from the stack triggered by userspace if itdoes not provide the DGID to a kernel initiated RDMA_NL_LS_OP_IP_RESOLVEquery. BUG: KMSAN: uninit-value in hex_byte_pack include/linux/hex.h:13 [inline] BUG: KMSAN: uninit-value in ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490 hex_byte_pack include/linux/hex.h:13 [inline] ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490 ip6_addr_string+0x18a/0x3e0 lib/vsprintf.c:1509 ip_addr_string+0x245/0xee0 lib/vsprintf.c:1633 pointer+0xc09/0x1bd0 lib/vsprintf.c:2542 vsnprintf+0xf8a/0x1bd0 lib/vsprintf.c:2930 vprintk_store+0x3ae/0x1530 kernel/printk/printk.c:2279 vprintk_emit+0x307/0xcd0 kernel/printk/printk.c:2426 vprintk_default+0x3f/0x50 kernel/printk/printk.c:2465 vprintk+0x36/0x50 kernel/printk/printk_safe.c:82 _printk+0x17e/0x1b0 kernel/printk/printk.c:2475 ib_nl_process_good_ip_rsep drivers/infiniband/core/addr.c:128 [inline] ib_nl_handle_ip_res_resp+0x963/0x9d0 drivers/infiniband/core/addr.c:141 rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:-1 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0xefa/0x11c0 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0xf04/0x12b0 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x10b3/0x1250 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x333/0x3d0 net/socket.c:729 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2617 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2671 __sys_sendmsg+0x1aa/0x300 net/socket.c:2703 __compat_sys_sendmsg net/compat.c:346 [inline] __do_compat_sys_sendmsg net/compat.c:353 [inline] __se_compat_sys_sendmsg net/compat.c:350 [inline] __ia32_compat_sys_sendmsg+0xa4/0x100 net/compat.c:350 ia32_sys_call+0x3f6c/0x4310 arch/x86/include/generated/asm/syscalls_32.h:371 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x150 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:3
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timerWhen advancing the target expiration for the guest's APIC timer in periodicmode, set the expiration to "now" if the target expiration is in the past(similar to what is done in update_target_expiration()). Blindly addingthe period to the previous target expiration can result in KVM generatinga practically unbounded number of hrtimer IRQs due to programming anexpired timer over and over. In extreme scenarios, e.g. if userspacepauses/suspends a VM for an extended duration, this can even cause hardlockups in the host.Currently, the bug only affects Intel CPUs when using the hypervisor timer(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,a.k.a. hrtimer, which KVM keeps running even on exits to userspace, theHV timer only runs while the guest is active. As a result, if the vCPUdoes not run for an extended duration, there will be a huge gap betweenthe target expiration and the current time the vCPU resumes running.Because the target expiration is incremented by only one period on eachtimer expiration, this leads to a series of timer expirations occurringrapidly after the vCPU/VM resumes.More critically, when the vCPU first triggers a periodic HV timerexpiration after resuming, advancing the expiration by only one periodwill result in a target expiration in the past. As a result, the deltamay be calculated as a negative value. When the delta is converted intoan absolute value (tscdeadline is an unsigned u64), the resulting valuecan overflow what the HV timer is capable of programming. I.e. the largevalue will exceed the VMX Preemption Timer's maximum bit width ofcpu_preemption_timer_multi + 32, and thus cause KVM to switch from theHV timer to the software timer (hrtimers).After switching to the software timer, periodic timer expiration callbacksmay be executed consecutively within a single clock interrupt handler,because hrtimers honors KVM's request for an expiration in the past andimmediately re-invokes KVM's callback after reprogramming. And becausethe interrupt handler runs with IRQs disabled, restarting KVM's hrtimerover and over until the target expiration is advanced to "now" can resultin a hard lockup.E.g. the following hard lockup was triggered in the host when running aWindows VM (only relevant because it used the APIC timer in periodic mode)after resuming the VM from a long suspend (in the host). NMI watchdog: Watchdog detected hard LOCKUP on cpu 45 ... RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm] ... RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046 RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500 RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0 R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0 R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8 FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0 PKRU: 55555554 Call Trace: apic_timer_fn+0x31/0x50 [kvm] __hrtimer_run_queues+0x100/0x280 hrtimer_interrupt+0x100/0x210 ? ttwu_do_wakeup+0x19/0x160 smp_apic_timer_interrupt+0x6a/0x130 apic_timer_interrupt+0xf/0x20 Moreover, if the suspend duration of the virtual machine is not long enoughto trigger a hard lockup in this scenario, since commit 98c25ead5eda("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVMwill continue using the software timer until the guest reprograms the APICtimer in some way. Since the periodic timer does not require frequent APICtimer register programming, the guest may continue to use the softwaretimer in ---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix string copying in parse_apply_sb_mount_options()strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-termstring of possibly bigger size. Commit 0efc5990bca5 ("string.h: Introducememtostr() and memtostr_pad()") provides additional information in thatregard. So if this happens, the following warning is observed:strnlen: detected buffer overflow: 65 byte read of buffer size 64WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032Modules linked in:CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032Call Trace: __fortify_panic+0x1f/0x30 lib/string_helpers.c:1039 strnlen include/linux/fortify-string.h:235 [inline] sized_strscpy include/linux/fortify-string.h:309 [inline] parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline] __ext4_fill_super fs/ext4/super.c:5261 [inline] ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706 get_tree_bdev_flags+0x387/0x620 fs/super.c:1636 vfs_get_tree+0x93/0x380 fs/super.c:1814 do_new_mount fs/namespace.c:3553 [inline] path_mount+0x6ae/0x1f70 fs/namespace.c:3880 do_mount fs/namespace.c:3893 [inline] __do_sys_mount fs/namespace.c:4103 [inline] __se_sys_mount fs/namespace.c:4080 [inline] __x64_sys_mount+0x280/0x300 fs/namespace.c:4080 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x76/0x7eSince userspace is expected to provide s_mount_opts field to be at most 63characters long with the ending byte being NUL-term, use a 64-byte bufferwhich matches the size of s_mount_opts, so that strscpy_pad() does its jobproperly. Return with error if the user still managed to provide anon-NUL-term string here.Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: User-controlled header names and values containing newlines can allow injecting HTTP headers.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- python3 > 0-0 (version in image is 3.6.15-150300.10.97.2).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pds_core: remove write-after-free of client_idA use-after-free error popped up in stress testing:[Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core][Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47):[Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core][Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core][Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70[Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180[Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80[Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0[Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80The actual device uninit usually happens on a separate threadscheduled after this code runs, but there is no guarantee of orderof thread execution, so this could be a problem. There's noactual need to clear the client_id at this point, so simplyremove the offending code.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: qgroup: fix race between quota disable and quota rescan ioctlThere's a race between a task disabling quotas and another running therescan ioctl that can result in a use-after-free of qgroup records fromthe fs_info->qgroup_tree rbtree.This happens as follows:1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();2) Task B enters btrfs_quota_disable() and calls btrfs_qgroup_wait_for_completion(), which does nothing because at that point fs_info->qgroup_rescan_running is false (it wasn't set yet by task A);3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;4) Task A enters qgroup_rescan_zero_tracking() which starts iterating the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock, but task B is freeing qgroup records from that tree without holding the lock, resulting in a use-after-free.Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().Also at btrfs_qgroup_rescan() don't start the rescan worker if quotaswere already disabled.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs: writeback: fix use-after-free in __mark_inode_dirty()An use-after-free issue occurred when __mark_inode_dirty() get thebdi_writeback that was in the progress of switching.CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1......pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : __mark_inode_dirty+0x124/0x418lr : __mark_inode_dirty+0x118/0x418sp : ffffffc08c9dbbc0........Call trace: __mark_inode_dirty+0x124/0x418 generic_update_time+0x4c/0x60 file_modified+0xcc/0xd0 ext4_buffered_write_iter+0x58/0x124 ext4_file_write_iter+0x54/0x704 vfs_write+0x1c0/0x308 ksys_write+0x74/0x10c __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x40/0xe4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x194/0x198Root cause is:systemd-random-seed kworker----------------------------------------------------------------------___mark_inode_dirty inode_switch_wbs_work_fn spin_lock(&inode->i_lock); inode_attach_wb locked_inode_to_wb_and_lock_list get inode->i_wb spin_unlock(&inode->i_lock); spin_lock(&wb->list_lock) spin_lock(&inode->i_lock) inode_io_list_move_locked spin_unlock(&wb->list_lock) spin_unlock(&inode->i_lock) spin_lock(&old_wb->list_lock) inode_do_switch_wbs spin_lock(&inode->i_lock) inode->i_wb = new_wb spin_unlock(&inode->i_lock) spin_unlock(&old_wb->list_lock) wb_put_many(old_wb, nr_switched) cgwb_release old wb released wb_wakeup_delayed() accesses wb, then trigger the use-after-free issueFix this race condition by holding inode spinlock untilwb_wakeup_delayed() finished.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cnic: Fix use-after-free bugs in cnic_delete_taskThe original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),which does not guarantee that the delayed work item 'delete_task' hasfully completed if it was already running. Additionally, the delayed workitem is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() onlyblocks and waits for work items that were already queued to theworkqueue prior to its invocation. Any work items submitted afterflush_workqueue() is called are not included in the set of tasks that theflush operation awaits. This means that after the cyclic work items havefinished executing, a delayed work item may still exist in the workqueue.This leads to use-after-free scenarios where the cnic_dev is deallocatedby cnic_free_dev(), while delete_task remains active and attempt todereference cnic_dev in cnic_delete_task().A typical race condition is illustrated below:CPU 0 (cleanup) | CPU 1 (delayed work callback)cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //useReplace cancel_delayed_work() with cancel_delayed_work_sync() to ensurethat the cyclic delayed work item is properly canceled and that anyongoing execution of the work item completes before the cnic_dev isdeallocated. Furthermore, since cancel_delayed_work_sync() uses__flush_work(work, true) to synchronously wait for any currentlyexecuting instance of the work item to finish, the flush_workqueue()becomes redundant and should be removed.This bug was identified through static analysis. To reproduce the issueand validate the fix, I simulated the cnic PCI device in QEMU andintroduced intentional delays - such as inserting calls to ssleep()within the cnic_delete_task() function - to increase the likelihoodof triggering the bug.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mappingWhen an invalid value is passed via quirk option, currentlybytcr_rt5640 driver just ignores and leaves as is, which may lead tounepxected results like OOB access.This patch adds the sanity check and corrects the input mapping to thecertain default value if an invalid value is passed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: Intel: bytcr_rt5640: Fix invalid quirk input mappingWhen an invalid value is passed via quirk option, currentlybytcr_rt5640 driver only shows an error message but leaves as is.This may lead to unepxected results like OOB access.This patch corrects the input mapping to the certain default value ifan invalid value is passed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: replace BUG_ON with bounds check for map->max_osdOSD indexes come from untrusted network packets. Boundary checks areadded to validate these against map->max_osd.[ idryomov: drop BUG_ON in ceph_get_primary_affinity(), minor cosmetic edits ]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/panthor: Fix UAF race between device unplug and FW event processingThe function panthor_fw_unplug() will free the FW memory sections.The problem is that there could still be pending FW events which are yetnot handled at this point. process_fw_events_work() can in this case tryto access said freed memory.Simply call disable_work_sync() to both drain and prevent futureinvocation of process_fw_events_work().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mlxsw: spectrum_mr: Fix use-after-free when updating multicast route statsCited commit added a dedicated mutex (instead of RTNL) to protect themulticast route list, so that it will not change while the driverperiodically traverses it in order to update the kernel about multicastroute stats that were queried from the device.One instance of list entry deletion (during route replace) was missedand it can result in a use-after-free [1].Fix by acquiring the mutex before deleting the entry from the list andreleasing it afterwards.[1]BUG: KASAN: slab-use-after-free in mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum]Read of size 8 at addr ffff8881523c2fa8 by task kworker/2:5/22043CPU: 2 UID: 0 PID: 22043 Comm: kworker/2:5 Not tainted 6.18.0-rc1-custom-g1a3d6d7cd014 #1 PREEMPT(full)Hardware name: Mellanox Technologies Ltd. MSN2010/SA002610, BIOS 5.6.5 08/24/2017Workqueue: mlxsw_core mlxsw_sp_mr_stats_update [mlxsw_spectrum]Call Trace: dump_stack_lvl+0xba/0x110 print_report+0x174/0x4f5 kasan_report+0xdf/0x110 mlxsw_sp_mr_stats_update+0x4a5/0x540 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:1006 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30 Allocated by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 mlxsw_sp_mr_route_add+0xd8/0x4770 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30Freed by task 29933: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x43/0x70 kfree+0x14e/0x700 mlxsw_sp_mr_route_add+0x2dea/0x4770 drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:444 [mlxsw_spectrum] mlxsw_sp_router_fibmr_event_work+0x371/0xad0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7965 [mlxsw_spectrum] process_one_work+0x9cc/0x18e0 worker_thread+0x5df/0xe40 kthread+0x3b8/0x730 ret_from_fork+0x3e9/0x560 ret_from_fork_asm+0x1a/0x30
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Input: lkkbd - disable pending work before freeing devicelkkbd_interrupt() schedules lk->tq via schedule_work(), and the workhandler lkkbd_reinit() dereferences the lkkbd structure and itsserio/input_dev fields.lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbdstructure without preventing the reinit work from being queued againuntil serio_close() returns. This can allow the work handler to runafter the structure has been freed, leading to a potential use-after-free.Use disable_work_sync() instead of cancel_work_sync() to ensure thereinit work cannot be re-queued, and call it both in lkkbd_disconnect()and in lkkbd_connect() error paths after serio_open().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Wait for io return on terminate rportSystem crash due to use after free.Current code allows terminate_rport_io to exit before makingsure all IOs has returned. For FCP-2 device, IO's can hangon in HW because driver has not tear down the session in FW atfirst sign of cable pull. When dev_loss_tmo timer pops,terminate_rport_io is called and upper layer is about tofree various resources. Terminate_rport_io trigger qla to dothe final cleanup, but the cleanup might not be fast enough where itleave qla still holding on to the same resource.Wait for IO's to return to upper layer before resources are freed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLevSyzkaller reported the following issue:UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:1965:6index -84 is out of range for type 's8[341]' (aka 'signed char[341]')CPU: 1 PID: 4995 Comm: syz-executor146 Not tainted 6.4.0-rc6-syzkaller-00037-gb6dad5178cea #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAllocDmapLev+0x3e5/0x430 fs/jfs/jfs_dmap.c:1965 dbAllocCtl+0x113/0x920 fs/jfs/jfs_dmap.c:1809 dbAllocAG+0x28f/0x10b0 fs/jfs/jfs_dmap.c:1350 dbAlloc+0x658/0xca0 fs/jfs/jfs_dmap.c:874 dtSplitUp fs/jfs/jfs_dtree.c:974 [inline] dtInsert+0xda7/0x6b00 fs/jfs/jfs_dtree.c:863 jfs_create+0x7b6/0xbb0 fs/jfs/namei.c:137 lookup_open fs/namei.c:3492 [inline] open_last_lookups fs/namei.c:3560 [inline] path_openat+0x13df/0x3170 fs/namei.c:3788 do_filp_open+0x234/0x490 fs/namei.c:3818 do_sys_openat2+0x13f/0x500 fs/open.c:1356 do_sys_open fs/open.c:1372 [inline] __do_sys_openat fs/open.c:1388 [inline] __se_sys_openat fs/open.c:1383 [inline] __x64_sys_openat+0x247/0x290 fs/open.c:1383 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcdRIP: 0033:0x7f1f4e33f7e9Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007ffc21129578 EFLAGS: 00000246 ORIG_RAX: 0000000000000101RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f4e33f7e9RDX: 000000000000275a RSI: 0000000020000040 RDI: 00000000ffffff9cRBP: 00007f1f4e2ff080 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 00007f1f4e2ff110R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The bug occurs when the dbAllocDmapLev()function attempts to accessdp->tree.stree[leafidx + LEAFIND] while the leafidx value is negative.To rectify this, the patch introduces a safeguard within thedbAllocDmapLev() function. A check has been added to verify if leafidx isnegative. If it is, the function immediately returns an I/O error, preventingany further execution that could potentially cause harm.Tested via syzbot.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ftruncate: pass a signed offsetThe old ftruncate() syscall, using the 32-bit off_t misses a signextension when called in compat mode on 64-bit architectures. As aresult, passing a negative length accidentally succeeds in truncatingto file size between 2GiB and 4GiB.Changing the type of the compat syscall to the signed compat_off_tchanges the behavior so it instead returns -EINVAL.The native entry point, the truncate() syscall and the correspondingloff_t based variants are all correct already and do not sufferfrom this mistake.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: When doing multi-threaded LDAPS transfers (LDAP over TLS) with libcurl,changing TLS options in one thread would inadvertently change them globallyand therefore possibly also affect other concurrently setup transfers.Disabling certificate verification for a specific transfer couldunintentionally disable the feature for other threads as well.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- curl > 0-0 (version in image is 8.14.1-150700.7.2.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/page_alloc: fix race condition in unaccepted memory handlingThe page allocator tracks the number of zones that have unaccepted memoryusing static_branch_enc/dec() and uses that static branch in hot paths todetermine if it needs to deal with unaccepted memory.Borislav and Thomas pointed out that the tracking is racy: operations onstatic_branch are not serialized against adding/removing unaccepted pagesto/from the zone.Sanity checks inside static_branch machinery detects it:WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0The comment around the WARN() explains the problem: /* * Warn about the '-1' case though; since that means a * decrement is concurrent with a first (0->1) increment. IOW * people are trying to disable something that wasn't yet fully * enabled. This suggests an ordering problem on the user side. */The effect of this static_branch optimization is only visible onmicrobenchmark.Instead of adding more complexity around it, remove it altogether.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()The hfsplus_readdir() method is capable to crash by callinghfsplus_uni2asc():[ 667.121659][ T9805] ==================================================================[ 667.122651][ T9805] BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0x902/0xa10[ 667.123627][ T9805] Read of size 2 at addr ffff88802592f40c by task repro/9805[ 667.124578][ T9805][ 667.124876][ T9805] CPU: 3 UID: 0 PID: 9805 Comm: repro Not tainted 6.16.0-rc3 #1 PREEMPT(full)[ 667.124886][ T9805] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[ 667.124890][ T9805] Call Trace:[ 667.124893][ T9805] [ 667.124896][ T9805] dump_stack_lvl+0x10e/0x1f0[ 667.124911][ T9805] print_report+0xd0/0x660[ 667.124920][ T9805] ? __virt_addr_valid+0x81/0x610[ 667.124928][ T9805] ? __phys_addr+0xe8/0x180[ 667.124934][ T9805] ? hfsplus_uni2asc+0x902/0xa10[ 667.124942][ T9805] kasan_report+0xc6/0x100[ 667.124950][ T9805] ? hfsplus_uni2asc+0x902/0xa10[ 667.124959][ T9805] hfsplus_uni2asc+0x902/0xa10[ 667.124966][ T9805] ? hfsplus_bnode_read+0x14b/0x360[ 667.124974][ T9805] hfsplus_readdir+0x845/0xfc0[ 667.124984][ T9805] ? __pfx_hfsplus_readdir+0x10/0x10[ 667.124994][ T9805] ? stack_trace_save+0x8e/0xc0[ 667.125008][ T9805] ? iterate_dir+0x18b/0xb20[ 667.125015][ T9805] ? trace_lock_acquire+0x85/0xd0[ 667.125022][ T9805] ? lock_acquire+0x30/0x80[ 667.125029][ T9805] ? iterate_dir+0x18b/0xb20[ 667.125037][ T9805] ? down_read_killable+0x1ed/0x4c0[ 667.125044][ T9805] ? putname+0x154/0x1a0[ 667.125051][ T9805] ? __pfx_down_read_killable+0x10/0x10[ 667.125058][ T9805] ? apparmor_file_permission+0x239/0x3e0[ 667.125069][ T9805] iterate_dir+0x296/0xb20[ 667.125076][ T9805] __x64_sys_getdents64+0x13c/0x2c0[ 667.125084][ T9805] ? __pfx___x64_sys_getdents64+0x10/0x10[ 667.125091][ T9805] ? __x64_sys_openat+0x141/0x200[ 667.125126][ T9805] ? __pfx_filldir64+0x10/0x10[ 667.125134][ T9805] ? do_user_addr_fault+0x7fe/0x12f0[ 667.125143][ T9805] do_syscall_64+0xc9/0x480[ 667.125151][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f[ 667.125158][ T9805] RIP: 0033:0x7fa8753b2fc9[ 667.125164][ T9805] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 48[ 667.125172][ T9805] RSP: 002b:00007ffe96f8e0f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000d9[ 667.125181][ T9805] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa8753b2fc9[ 667.125185][ T9805] RDX: 0000000000000400 RSI: 00002000000063c0 RDI: 0000000000000004[ 667.125190][ T9805] RBP: 00007ffe96f8e110 R08: 00007ffe96f8e110 R09: 00007ffe96f8e110[ 667.125195][ T9805] R10: 0000000000000000 R11: 0000000000000217 R12: 0000556b1e3b4260[ 667.125199][ T9805] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000[ 667.125207][ T9805] [ 667.125210][ T9805][ 667.145632][ T9805] Allocated by task 9805:[ 667.145991][ T9805] kasan_save_stack+0x20/0x40[ 667.146352][ T9805] kasan_save_track+0x14/0x30[ 667.146717][ T9805] __kasan_kmalloc+0xaa/0xb0[ 667.147065][ T9805] __kmalloc_noprof+0x205/0x550[ 667.147448][ T9805] hfsplus_find_init+0x95/0x1f0[ 667.147813][ T9805] hfsplus_readdir+0x220/0xfc0[ 667.148174][ T9805] iterate_dir+0x296/0xb20[ 667.148549][ T9805] __x64_sys_getdents64+0x13c/0x2c0[ 667.148937][ T9805] do_syscall_64+0xc9/0x480[ 667.149291][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f[ 667.149809][ T9805][ 667.150030][ T9805] The buggy address belongs to the object at ffff88802592f000[ 667.150030][ T9805] which belongs to the cache kmalloc-2k of size 2048[ 667.151282][ T9805] The buggy address is located 0 bytes to the right of[ 667.151282][ T9805] allocated 1036-byte region [ffff88802592f000, ffff88802592f40c)[ 667.1---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: fix slab-out-of-bounds in hfsplus_bnode_read()The hfsplus_bnode_read() method can trigger the issue:[ 174.852007][ T9784] ==================================================================[ 174.852709][ T9784] BUG: KASAN: slab-out-of-bounds in hfsplus_bnode_read+0x2f4/0x360[ 174.853412][ T9784] Read of size 8 at addr ffff88810b5fc6c0 by task repro/9784[ 174.854059][ T9784][ 174.854272][ T9784] CPU: 1 UID: 0 PID: 9784 Comm: repro Not tainted 6.16.0-rc3 #7 PREEMPT(full)[ 174.854281][ T9784] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[ 174.854286][ T9784] Call Trace:[ 174.854289][ T9784] [ 174.854292][ T9784] dump_stack_lvl+0x10e/0x1f0[ 174.854305][ T9784] print_report+0xd0/0x660[ 174.854315][ T9784] ? __virt_addr_valid+0x81/0x610[ 174.854323][ T9784] ? __phys_addr+0xe8/0x180[ 174.854330][ T9784] ? hfsplus_bnode_read+0x2f4/0x360[ 174.854337][ T9784] kasan_report+0xc6/0x100[ 174.854346][ T9784] ? hfsplus_bnode_read+0x2f4/0x360[ 174.854354][ T9784] hfsplus_bnode_read+0x2f4/0x360[ 174.854362][ T9784] hfsplus_bnode_dump+0x2ec/0x380[ 174.854370][ T9784] ? __pfx_hfsplus_bnode_dump+0x10/0x10[ 174.854377][ T9784] ? hfsplus_bnode_write_u16+0x83/0xb0[ 174.854385][ T9784] ? srcu_gp_start+0xd0/0x310[ 174.854393][ T9784] ? __mark_inode_dirty+0x29e/0xe40[ 174.854402][ T9784] hfsplus_brec_remove+0x3d2/0x4e0[ 174.854411][ T9784] __hfsplus_delete_attr+0x290/0x3a0[ 174.854419][ T9784] ? __pfx_hfs_find_1st_rec_by_cnid+0x10/0x10[ 174.854427][ T9784] ? __pfx___hfsplus_delete_attr+0x10/0x10[ 174.854436][ T9784] ? __asan_memset+0x23/0x50[ 174.854450][ T9784] hfsplus_delete_all_attrs+0x262/0x320[ 174.854459][ T9784] ? __pfx_hfsplus_delete_all_attrs+0x10/0x10[ 174.854469][ T9784] ? rcu_is_watching+0x12/0xc0[ 174.854476][ T9784] ? __mark_inode_dirty+0x29e/0xe40[ 174.854483][ T9784] hfsplus_delete_cat+0x845/0xde0[ 174.854493][ T9784] ? __pfx_hfsplus_delete_cat+0x10/0x10[ 174.854507][ T9784] hfsplus_unlink+0x1ca/0x7c0[ 174.854516][ T9784] ? __pfx_hfsplus_unlink+0x10/0x10[ 174.854525][ T9784] ? down_write+0x148/0x200[ 174.854532][ T9784] ? __pfx_down_write+0x10/0x10[ 174.854540][ T9784] vfs_unlink+0x2fe/0x9b0[ 174.854549][ T9784] do_unlinkat+0x490/0x670[ 174.854557][ T9784] ? __pfx_do_unlinkat+0x10/0x10[ 174.854565][ T9784] ? __might_fault+0xbc/0x130[ 174.854576][ T9784] ? getname_flags.part.0+0x1c5/0x550[ 174.854584][ T9784] __x64_sys_unlink+0xc5/0x110[ 174.854592][ T9784] do_syscall_64+0xc9/0x480[ 174.854600][ T9784] entry_SYSCALL_64_after_hwframe+0x77/0x7f[ 174.854608][ T9784] RIP: 0033:0x7f6fdf4c3167[ 174.854614][ T9784] Code: f0 ff ff 73 01 c3 48 8b 0d 26 0d 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 08[ 174.854622][ T9784] RSP: 002b:00007ffcb948bca8 EFLAGS: 00000206 ORIG_RAX: 0000000000000057[ 174.854630][ T9784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6fdf4c3167[ 174.854636][ T9784] RDX: 00007ffcb948bcc0 RSI: 00007ffcb948bcc0 RDI: 00007ffcb948bd50[ 174.854641][ T9784] RBP: 00007ffcb948cd90 R08: 0000000000000001 R09: 00007ffcb948bb40[ 174.854645][ T9784] R10: 00007f6fdf564fc0 R11: 0000000000000206 R12: 0000561e1bc9c2d0[ 174.854650][ T9784] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000[ 174.854658][ T9784] [ 174.854661][ T9784][ 174.879281][ T9784] Allocated by task 9784:[ 174.879664][ T9784] kasan_save_stack+0x20/0x40[ 174.880082][ T9784] kasan_save_track+0x14/0x30[ 174.880500][ T9784] __kasan_kmalloc+0xaa/0xb0[ 174.880908][ T9784] __kmalloc_noprof+0x205/0x550[ 174.881337][ T9784] __hfs_bnode_create+0x107/0x890[ 174.881779][ T9784] hfsplus_bnode_find+0x2d0/0xd10[ 174.882222][ T9784] hfsplus_brec_find+0x2b0/0x520[ 174.882659][ T9784] hfsplus_delete_all_attrs+0x23b/0x3---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: nfc: nci: Add parameter validation for packet dataSyzbot reported an uninitialized value bug in nci_init_req, which wasintroduced by commit 5aca7966d2a7 ("Merge tag'perf-tools-fixes-for-v6.17-2025-09-16' ofgit://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools").This bug arises due to very limited and poor input validationthat was done at nic_valid_size(). This validation onlyvalidates the skb->len (directly reflects size provided at theuserspace interface) with the length provided in the bufferitself (interpreted as NCI_HEADER). This leads to the processingof memory content at the address assuming the correct layoutper what opcode requires there. This leads to the accesses tobuffer of `skb_buff->data` which is not assigned anything yet.Following the same silent drop of packets of invalid sizes at`nic_valid_size()`, add validation of the data in the respectivehandlers and return error values in case of failure. Releasethe skb if error values are returned from handlers in`nci_nft_packet` and effectively do a silent dropPossible TODO: because we silently drop the packets, thecall to `nci_request` will be waiting for completion of requestand will face timeouts. These timeouts can get excessively loggedin the dmesg. A proper handling of them may require to export`nci_request_cancel` (or propagate error handling from thenft packets handlers).
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs: udf: fix OOB read in lengthAllocDescs handlingWhen parsing Allocation Extent Descriptor, lengthAllocDescs comes fromon-disk data and must be validated against the block size. Crafted orcorrupted images may set lengthAllocDescs so that the total descriptorlength (sizeof(allocExtDesc) + lengthAllocDescs) exceeds the buffer,leading udf_update_tag() to call crc_itu_t() on out-of-bounds memory andtrigger a KASAN use-after-free read.BUG: KASAN: use-after-free in crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60Read of size 1 at addr ffff888041e7d000 by task syz-executor317/5309CPU: 0 UID: 0 PID: 5309 Comm: syz-executor317 Not tainted 6.12.0-rc4-syzkaller-00261-g850925a8133c #0Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60 udf_update_tag+0x70/0x6a0 fs/udf/misc.c:261 udf_write_aext+0x4d8/0x7b0 fs/udf/inode.c:2179 extent_trunc+0x2f7/0x4a0 fs/udf/truncate.c:46 udf_truncate_tail_extent+0x527/0x7e0 fs/udf/truncate.c:106 udf_release_file+0xc1/0x120 fs/udf/file.c:185 __fput+0x23f/0x880 fs/file_table.c:431 task_work_run+0x24f/0x310 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xa2f/0x28e0 kernel/exit.c:939 do_group_exit+0x207/0x2c0 kernel/exit.c:1088 __do_sys_exit_group kernel/exit.c:1099 [inline] __se_sys_exit_group kernel/exit.c:1097 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1097 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Validate the computed total length against epos->bh->b_size.Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ixgbe: fix too early devlink_free() in ixgbe_remove()Since ixgbe_adapter is embedded in devlink, calling devlink_free()prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free()to the end.KASAN report: BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] Read of size 8 at addr ffff0000adf813e0 by task bash/2095 CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full) [...] Call trace: show_stack+0x30/0x90 (C) dump_stack_lvl+0x9c/0xd0 print_address_description.constprop.0+0x90/0x310 print_report+0x104/0x1f0 kasan_report+0x88/0x180 __asan_report_load8_noabort+0x20/0x30 ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe] ixgbe_remove+0x2d0/0x8c0 [ixgbe] pci_device_remove+0xa0/0x220 device_remove+0xb8/0x170 device_release_driver_internal+0x318/0x490 device_driver_detach+0x40/0x68 unbind_store+0xec/0x118 drv_attr_store+0x64/0xb8 sysfs_kf_write+0xcc/0x138 kernfs_fop_write_iter+0x294/0x440 new_sync_write+0x1fc/0x588 vfs_write+0x480/0x6a0 ksys_write+0xf0/0x1e0 __arm64_sys_write+0x70/0xc0 invoke_syscall.constprop.0+0xcc/0x280 el0_svc_common.constprop.0+0xa8/0x248 do_el0_svc+0x44/0x68 el0_svc+0x54/0x160 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: parse_dfs_referrals: prevent oob on malformed inputMalicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS- reply smaller than sizeof(struct get_dfs_referral_rsp)- reply with number of referrals smaller than NumberOfReferrals in theheaderProcessing of such replies will cause oob.Return -EINVAL error on such replies to prevent oob-s.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: ISO: Fix possible UAF on iso_conn_freeThis attempt to fix similar issue to sco_conn_free where if theconn->sk is not set to NULL may lead to UAF on iso_conn_free.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tls: Use __sk_dst_get() and dst_dev_rcu() in get_netdev_for_sock().get_netdev_for_sock() is called during setsockopt(),so not under RCU.Using sk_dst_get(sk)->dev could trigger UAF.Let's use __sk_dst_get() and dst_dev_rcu().Note that the only ->ndo_sk_get_lower_dev() user isbond_sk_get_lower_dev(), which uses RCU.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: use RCU in ip6_output()Use RCU in ip6_output() in order to use dst_dev_rcu() to preventpossible UAF.We can remove rcu_read_lock()/rcu_read_unlock() pairsfrom ip6_finish_output2().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match().smc_clc_prfx_match() is called from smc_listen_work() andnot under RCU nor RTNL.Using sk_dst_get(sk)->dev could trigger UAF.Let's use __sk_dst_get() and dst_dev_rcu().Note that the returned value of smc_clc_prfx_match() is notused in the caller.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: use dst_dev_rcu() in sk_setup_caps()Use RCU to protect accesses to dst->dev from sk_setup_caps()and sk_dst_gso_max_size().Also use dst_dev_rcu() in ip6_dst_mtu_maybe_forward(),and ip_dst_mtu_maybe_forward().ip4_dst_hoplimit() can use dst_dev_net_rcu().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loopThe cleanup loop was starting at the wrong array index, causingout-of-bounds access.Start the loop at the correct index for zero-indexed arrays to preventaccessing memory beyond the allocated array bounds.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: use dst_dev_rcu() in tcp_fastopen_active_disable_ofo_check()Use RCU to avoid a pair of atomic operations and a potentialUAF on dst_dev()->flags.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsingThe Supported Rates IE length from an incoming Association Request framewas used directly as the memcpy() length when copying into a fixed-size16-byte stack buffer (supportRate). A malicious station can advertise anIE length larger than 16 bytes, causing a stack buffer overflow.Clamp ie_len to the buffer size before copying the Supported Rates IE,and correct the bounds check when merging Extended Supported Rates toprevent a second potential overflow.This prevents kernel stack corruption triggered by malformed associationrequests.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: refresh inline data size before write operationsThe cached ei->i_inline_size can become stale between the initial sizecheck and when ext4_update_inline_data()/ext4_create_inline_data() useit. Although ext4_get_max_inline_size() reads the correct value at thetime of the check, concurrent xattr operations can modify i_inline_sizebefore ext4_write_lock_xattr() is acquired.This causes ext4_update_inline_data() and ext4_create_inline_data() towork with stale capacity values, leading to a BUG_ON() crash inext4_write_inline_data(): kernel BUG at fs/ext4/inline.c:1331! BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);The race window:1. ext4_get_max_inline_size() reads i_inline_size = 60 (correct)2. Size check passes for 50-byte write3. [Another thread adds xattr, i_inline_size changes to 40]4. ext4_write_lock_xattr() acquires lock5. ext4_update_inline_data() uses stale i_inline_size = 606. Attempts to write 50 bytes but only 40 bytes actually available7. BUG_ON() triggersFix this by recalculating i_inline_size via ext4_find_inline_data_nolock()immediately after acquiring xattr_sem. This ensures ext4_update_inline_data()and ext4_create_inline_data() work with current values that are protectedfrom concurrent modifications.This is similar to commit a54c4613dac1 ("ext4: fix race writing to aninline_data file while its xattrs are changing") which fixed i_inline_offstaleness. This patch addresses the related i_inline_size staleness issue.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: imm: Fix use-after-free bug caused by unfinished delayed workThe delayed work item 'imm_tq' is initialized in imm_attach() andscheduled via imm_queuecommand() for processing SCSI commands. When theIMM parallel port SCSI host adapter is detached through imm_detach(),the imm_struct device instance is deallocated.However, the delayed work might still be pending or executingwhen imm_detach() is called, leading to use-after-free bugswhen the work function imm_interrupt() accesses the alreadyfreed imm_struct memory.The race condition can occur as follows:CPU 0(detach thread) | CPU 1 | imm_queuecommand() | imm_queuecommand_lck()imm_detach() | schedule_delayed_work() kfree(dev) //FREE | imm_interrupt() | dev = container_of(...) //USE dev-> //USEAdd disable_delayed_work_sync() in imm_detach() to guarantee propercancellation of the delayed work item before imm_struct is deallocated.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: openvswitch: fix middle attribute validation in push_nsh() actionThe push_nsh() action structure looks like this: OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...))The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK'ed by thenla_for_each_nested() inside __ovs_nla_copy_actions(). The innermostOVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK'ed by the nla_for_each_nested()inside nsh_key_put_from_nlattr(). But nothing checks if the attributein the middle is OK. We don't even check that this attribute is theOVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data()calls - first time directly while calling validate_push_nsh() and thesecond time as part of the nla_for_each_nested() macro, which isn'tsafe, potentially causing invalid memory access if the size of thisattribute is incorrect. The failure may not be noticed duringvalidation due to larger netlink buffer, but cause trouble later duringaction execution where the buffer is allocated exactly to the size: BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] Read of size 184 at addr ffff88816459a634 by task a.out/22624 CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary) Call Trace: dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x2c/0x390 kasan_report+0xdd/0x110 kasan_check_range+0x35/0x1b0 __asan_memcpy+0x20/0x60 nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch] push_nsh+0x82/0x120 [openvswitch] do_execute_actions+0x1405/0x2840 [openvswitch] ovs_execute_actions+0xd5/0x3b0 [openvswitch] ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch] genl_family_rcv_msg_doit+0x1d6/0x2b0 genl_family_rcv_msg+0x336/0x580 genl_rcv_msg+0x9f/0x130 netlink_rcv_skb+0x11f/0x370 genl_rcv+0x24/0x40 netlink_unicast+0x73e/0xaa0 netlink_sendmsg+0x744/0xbf0 __sys_sendto+0x3d6/0x450 do_syscall_64+0x79/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Let's add some checks that the attribute is properly sized and it'sthe only one attribute inside the action. Technically, there is noreal reason for OVS_KEY_ATTR_NSH to be there, as we know that we'repushing an NSH header already, it just creates extra nesting, butthat's how uAPI works today. So, keeping as it is.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iomap: adjust read range correctly for non-block-aligned positionsiomap_adjust_read_range() assumes that the position and length passed inare block-aligned. This is not always the case however, as shown in thesyzbot generated case for erofs. This causes too many bytes to beskipped for uptodate blocks, which results in returning the incorrectposition and length to read in. If all the blocks are uptodate, thisunderflows length and returns a position beyond the folio.Fix the calculation to also take into account the block offset whencalculating how many bytes can be skipped for uptodate blocks.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: make decode_pool() more resilient against corrupted osdmapsIf the osdmap is (maliciously) corrupted such that the encoded lengthof ceph_pg_pool envelope is less than what is expected for a particularencoding version, out-of-bounds reads may ensue because the only boundscheck that is there is based on that length value.This patch adds explicit bounds checks for each field that is decodedor skipped.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: fix memory leak in mlx5e_ptp_openWhen kvzalloc_node or kvzalloc failed in mlx5e_ptp_open, the memorypointed by "c" or "cparams" is not freed, which can lead to a memoryleak. Fix by freeing the array in the error path.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: az6007: Fix null-ptr-deref in az6007_i2c_xfer()In az6007_i2c_xfer, msg is controlled by user. When msg[i].bufis null and msg[i].len is zero, former checks on msg[i].buf would bepassed. Malicious data finally reach az6007_i2c_xfer. If accessingmsg[i].buf[0] without sanity check, null ptr deref would happen.We add check on msg[i].len to prevent crash.Similar commit:commit 0ed554fd769a("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla4xxx: Add length check when parsing nlattrsThere are three places that qla4xxx parses nlattrs: - qla4xxx_set_chap_entry() - qla4xxx_iface_set_param() - qla4xxx_sysfs_ddb_set_param()and each of them directly converts the nlattr to specific pointer ofstructure without length checking. This could be dangerous as thoseattributes are not validated and a malformed nlattr (e.g., length 0) couldresult in an OOB read that leaks heap dirty data.Add the nla_len check before accessing the nlattr data and return EINVAL ifthe length check fails.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob writeWhen the oob buffer length is not in multiple of words, the oob writefunction does out-of-bounds read on the oob source buffer at the lastiteration. Fix that by always checking length limit on the oob bufferread and fill with 0xff when reaching the end of the buffer to the oobregisters.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: iwlwifi: mvm: fix potential array out of bounds accessAccount for IWL_SEC_WEP_KEY_OFFSET when needed while verifyingkey_len size in iwl_mvm_sec_key_add().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md: don't dereference mddev after export_rdev()Except for initial reference, mddev->kobject is referenced byrdev->kobject, and if the last rdev is freed, there is no guarantee thatmddev is still valid. Hence mddev should not be used anymore afterexport_rdev().This problem can be triggered by following test for mdadm at verylow rate:New file: mdadm/tests/23rdev-lifetimedevname=${dev0##*/}devt=`cat /sys/block/$devname/dev`pid=""runtime=2clean_up_test() { pill -9 $pid echo clear > /sys/block/md0/md/array_state}trap 'clean_up_test' EXITadd_by_sysfs() { while true; do echo $devt > /sys/block/md0/md/new_dev done}remove_by_sysfs(){ while true; do echo remove > /sys/block/md0/md/dev-${devname}/state done}echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"add_by_sysfs &pid="$pid $!"remove_by_sysfs &pid="$pid $!"sleep $runtimeexit 0Test cmd:./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetimeTest result:general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bcb: 0000 [#4] PREEMPT SMPCPU: 0 PID: 1292 Comm: test Tainted: G D W 6.5.0-rc2-00121-g01e55c376936 #562RIP: 0010:md_wakeup_thread+0x9e/0x320 [md_mod]Call Trace: mddev_unlock+0x1b6/0x310 [md_mod] rdev_attr_store+0xec/0x190 [md_mod] sysfs_kf_write+0x52/0x70 kernfs_fop_write_iter+0x19a/0x2a0 vfs_write+0x3b5/0x770 ksys_write+0x74/0x150 __x64_sys_write+0x22/0x30 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcdFix this problem by don't dereference mddev after export_rdev().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability has been found in GNU Binutils 2.45. This impacts the function bfd_elf_gc_record_vtentry of the file bfd/elflink.c of the component Linker. The manipulation leads to out-of-bounds read. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The identifier of the patch is 047435dd988a3975d40c6626a8f739a0b2e154bc. To fix this issue, it is recommended to deploy a patch.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability was found in GNU Binutils 2.45. Affected is the function elf_link_add_object_symbols of the file bfd/elflink.c of the component Linker. The manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. Upgrading to version 2.46 is able to address this issue. The patch is identified as 72efdf166aa0ed72ecc69fc2349af6591a7a19c0. Upgrading the affected component is advised.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability was determined in GNU Binutils 2.45. Affected by this vulnerability is the function get_link_hash_entry of the file bfd/elflink.c of the component Linker. This manipulation causes out-of-bounds read. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2.46 addresses this issue. Patch name: aeaaa9af6359c8e394ce9cf24911fec4f4d23703. It is advisable to upgrade the affected component.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A flaw was found in util-linux. This vulnerability allows a heap buffer overread when processing 256-byte usernames, specifically within the `setpwnam()` function, affecting SUID (Set User ID) login-utils utilities writing to the password database.
Packages affected:
- sle-module-server-applications-release == 15.7 (version in image is 15.7-150700.28.1).
- util-linux > 0-0 (version in image is 2.40.4-150700.2.4).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: appletalk: Fix device refcount leak in atrtr_create()When updating an existing route entry in atrtr_create(), the old devicereference was not being released before assigning the new device,leading to a device refcount leak. Fix this by calling dev_put() torelease the old device reference before holding the new one.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:parisc: Revise __get_user() to probe user read accessBecause of the way read access support is implemented, read accessinterruptions are only triggered at privilege levels 2 and 3. Thekernel executes at privilege level 0, so __get_user() never triggersa read access interruption (code 26). Thus, it is currently possiblefor user code to access a read protected address via a system call.Fix this by probing read access rights at privilege level 3 (PRIV_USER)and setting __gu_err to -EFAULT (-14) if access isn't allowed.Note the cmpiclr instruction does a 32-bit compare because COND macrodoesn't work inside asm.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/eesWhen we don't have a clock specified in the device tree, we have no way toensure the BAM is on. This is often the case for remotely-controlled orremotely-powered BAM instances. In this case, we need to read num-channelsfrom the DT to have all the necessary information to complete probing.However, at the moment invalid device trees without clock and withoutnum-channels still continue probing, because the error handling is missingreturn statements. The driver will then later try to read the number ofchannels from the registers. This is unsafe, because it relies on bootfirmware and lucky timing to succeed. Unfortunately, the lack of propererror handling here has been abused for several Qualcomm SoCs upstream,causing early boot crashes in several situations [1, 2].Avoid these early crashes by erroring out when any of the required DTproperties are missing. Note that this will break some of the existing DTsupstream (mainly BAM instances related to the crypto engine). However,clearly these DTs have never been tested properly, since the error in thekernel log was just ignored. It's safer to disable the crypto engine forthese broken DTBs.[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:qed: Don't collect too many protection override GRC elementsIn the protection override dump path, the firmware can return far toomany GRC elements, resulting in attempting to write past the end of thepreviously-kmalloc'ed dump buffer.This will result in a kernel panic with reason: BUG: unable to handle kernel paging request at ADDRESSwhere "ADDRESS" is just past the end of the protection override dumpbuffer. The start address of the buffer is: p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_bufand the size of the buffer is buf_size in the same data structure.The panic can be arrived at from either the qede Ethernet driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc02662ed [qed] qed_dbg_protection_override_dump at ffffffffc0267792 [qed] qed_dbg_feature at ffffffffc026aa8f [qed] qed_dbg_all_data at ffffffffc026b211 [qed] qed_fw_fatal_reporter_dump at ffffffffc027298a [qed] devlink_health_do_dump at ffffffff82497f61 devlink_health_report at ffffffff8249cf29 qed_report_fatal_error at ffffffffc0272baf [qed] qede_sp_task at ffffffffc045ed32 [qede] process_one_work at ffffffff81d19783or the qedf storage driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc068b2ed [qed] qed_dbg_protection_override_dump at ffffffffc068c792 [qed] qed_dbg_feature at ffffffffc068fa8f [qed] qed_dbg_all_data at ffffffffc0690211 [qed] qed_fw_fatal_reporter_dump at ffffffffc069798a [qed] devlink_health_do_dump at ffffffff8aa95e51 devlink_health_report at ffffffff8aa9ae19 qed_report_fatal_error at ffffffffc0697baf [qed] qed_hw_err_notify at ffffffffc06d32d7 [qed] qed_spq_post at ffffffffc06b1011 [qed] qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed] qedf_cleanup_fcport at ffffffffc05e7597 [qedf] qedf_rport_event_handler at ffffffffc05e7bf7 [qedf] fc_rport_work at ffffffffc02da715 [libfc] process_one_work at ffffffff8a319663Resolve this by clamping the firmware's return value to the maximumnumber of legal elements the firmware should return.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rskin the TCP_ESTABLISHED state. [0]syzbot reused the server-side TCP Fast Open socket as a new client beforethe TFO socket completes 3WHS: 1. accept() 2. connect(AF_UNSPEC) 3. connect() to another destinationAs of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changesit to TCP_CLOSE and makes connect() possible, which restarts timers.Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, theretransmit timer triggered the warning and the intended packet was notretransmitted.Let's call reqsk_fastopen_remove() in tcp_disconnect().[0]:WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))Modules linked in:CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3eRSP: 0018:ffffc900002f8d40 EFLAGS: 00010293RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0Call Trace: tcp_write_timer (net/ipv4/tcp_timer.c:738) call_timer_fn (kernel/time/timer.c:1747) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372) timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135) tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035) __walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1)) tmigr_handle_remote (kernel/time/timer_migration.c:1096) handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580) irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35))
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fbcon: fix integer overflow in fbcon_do_set_fontFix integer overflow vulnerabilities in fbcon_do_set_font() where fontsize calculations could overflow when handling user-controlled fontparameters.The vulnerabilities occur when:1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount multiplication with user-controlled values that can overflow.2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow3. This results in smaller allocations than expected, leading to buffer overflows during font data copying.Add explicit overflow checking using check_mul_overflow() andcheck_add_overflow() kernel helpers to safety validate all sizecalculations before allocation.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: fix input validation logic for action_metaFix condition to check 'greater or equal' to prevent OOB dereference.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: fix idx validation in i40e_validate_queue_mapEnsure idx is within range of active/initialized TCs when iterating overvf->ch[idx] in i40e_validate_queue_map().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: target_core_configfs: Add length check to avoid buffer overflowA buffer overflow arises from the usage of snprintf to write into thebuffer "buf" in target_lu_gp_members_show function located in/drivers/target/target_core_configfs.c. This buffer is allocated withsize LU_GROUP_NAME_BUF (256 bytes).snprintf(...) formats multiple strings into buf with the HBA name(hba->hba_group.cg_item), a slash character, a devicename (dev->dev_group.cg_item) and a newline character, the total formatted stringlength may exceed the buffer size of 256 bytes.Since snprintf() returns the total number of bytes that would have beenwritten (the length of %s/%sn ), this value may exceed the buffer length(256 bytes) passed to memcpy(), this will ultimately cause functionmemcpy reporting a buffer overflow error.An additional check of the return value of snprintf() can avoid thisbuffer overflow.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: peak_usb: fix shift-out-of-bounds issueExplicitly uses a 64-bit constant when the number of bits used for itsshifting is 32 (which is the case for PC CAN FD interfaces supported bythis driver).[mkl: update subject, apply manually]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Squashfs: fix uninit-value in squashfs_get_parentSyzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug.This is caused by open_by_handle_at() being called with a file handlecontaining an invalid parent inode number. In particular the inode numberis that of a symbolic link, rather than a directory.Squashfs_get_parent() gets called with that symbolic link inode, andaccesses the parent member field. unsigned int parent_ino = squashfs_i(inode)->parent;Because non-directory inodes in Squashfs do not have a parent value, thisis uninitialised, and this causes an uninitialised value access.The fix is to initialise parent with the invalid inode 0, which will causean EINVAL error to be returned.Regular inodes used to share the parent field with the block_list_startfield. This is removed in this commit to enable the parent field tocontain the invalid inode number 0.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vhost: vringh: Fix copy_to_iter return value checkThe return value of copy_to_iter can't be negative, check whether thecopied length is equal to the requested length instead of checking fornegative values.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Fix NULL pointer deference in try_to_register_cardIn try_to_register_card(), the return value of usb_ifnum_to_if() ispassed directly to usb_interface_claimed() without a NULL check, whichwill lead to a NULL pointer dereference when creating an invalidUSB audio device. Fix this by adding a check to ensure the interfacepointer is valid before passing it to usb_interface_claimed().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/xe: Don't allow evicting of BOs in same VM in array of VM bindsAn array of VM binds can potentially evict other buffer objects (BOs)within the same VM under certain conditions, which may lead to NULLpointer dereferences later in the bind pipeline. To prevent this, clearthe allow_res_evict flag in the xe_bo_validate call.v2: - Invert polarity of no_res_evict (Thomas) - Add comment in code explaining issue (Thomas)(cherry picked from commit 8b9ba8d6d95fe75fed6b0480bb03da4b321bea08)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmodSince commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero whendevice is gone") UBSAN reports: UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17 index 28 is out of range for type 'pm8001_phy [16]'on rmmod when using an expander.For a direct attached device, attached_phy contains the local phy id.For a device behind an expander, attached_phy contains the remote phyid, not the local phy id.I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for adevice behind an expander, attached_phy can be much larger thanpm8001_ha->chip->n_phy (depending on the amount of phys of theexpander).E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of theports has an expander connected. The expander has 31 phys with phy ids0-30.The pm8001_ha->phy array only contains the phys of the HBA. It does notcontain the phys of the expander. Thus, it is wrong to use attached_phyto index the pm8001_ha->phy array for a device behind an expander.Thus, we can only clear phy_attached for devices that are directlyattached.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARCThe referenced commit introduced exception handlers on user-space memoryreferences in copy_from_user and copy_to_user. These handlers return fromthe respective function and calculate the remaining bytes left to copyusing the current register contents. This commit fixes a couple of badcalculations. This will fix the return value of copy_from_user andcopy_to_user in the faulting case. The behaviour of memcpy stays unchanged.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: use RCU in ip6_xmit()Use RCU in ip6_xmit() in order to use dst_dev_rcu() to preventpossible UAF.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: guard against EA inode refcount underflow in xattr updatesyzkaller found a path where ext4_xattr_inode_update_ref() reads an EAinode refcount that is already <= 0 and then applies ref_change (often-1). That lets the refcount underflow and we proceed with a bogus value,triggering errors like: EXT4-fs error: EA inode ref underflow: ref_count=-1 ref_change=-1 EXT4-fs warning: ea_inode dec ref err=-117Make the invariant explicit: if the current refcount is non-positive,treat this as on-disk corruption, emit ext4_error_inode(), and fail theoperation with -EFSCORRUPTED instead of updating the refcount. Delete theWARN_ONCE() as negative refcounts are now impossible; keep error reportingin ext4_error_inode().This prevents the underflow and the follow-on orphan/cleanup churn.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: MGMT: fix crash in set_mesh_sync and set_mesh_completeThere is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due tomemcpy from badly declared on-stack flexible array.Another crash is in set_mesh_complete() due to double list_del viamgmt_pending_valid + mgmt_pending_remove.Use DEFINE_FLEX to declare the flexible array right, and don't memcpyoutside bounds.As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free,and also report status on error.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fuse: fix livelock in synchronous file put from fuseblk workersI observed a hang when running generic/323 against a fuseblk server.This test opens a file, initiates a lot of AIO writes to that filedescriptor, and closes the file descriptor before the writes complete.Unsurprisingly, the AIO exerciser threads are mostly stuck waiting forresponses from the fuseblk server:# cat /proc/372265/task/372313/stack[<0>] request_wait_answer+0x1fe/0x2a0 [fuse][<0>] __fuse_simple_request+0xd3/0x2b0 [fuse][<0>] fuse_do_getattr+0xfc/0x1f0 [fuse][<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse][<0>] aio_read+0x130/0x1e0[<0>] io_submit_one+0x542/0x860[<0>] __x64_sys_io_submit+0x98/0x1a0[<0>] do_syscall_64+0x37/0xf0[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53But the /weird/ part is that the fuseblk server threads are waiting forresponses from itself:# cat /proc/372210/task/372232/stack[<0>] request_wait_answer+0x1fe/0x2a0 [fuse][<0>] __fuse_simple_request+0xd3/0x2b0 [fuse][<0>] fuse_file_put+0x9a/0xd0 [fuse][<0>] fuse_release+0x36/0x50 [fuse][<0>] __fput+0xec/0x2b0[<0>] task_work_run+0x55/0x90[<0>] syscall_exit_to_user_mode+0xe9/0x100[<0>] do_syscall_64+0x43/0xf0[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53The fuseblk server is fuse2fs so there's nothing all that exciting inthe server itself. So why is the fuse server calling fuse_file_put?The commit message for the fstest sheds some light on that:"By closing the file descriptor before calling io_destroy, you prettymuch guarantee that the last put on the ioctx will be done in interruptcontext (during I/O completion).Aha. AIO fgets a new struct file from the fd when it queues the ioctx.The completion of the FUSE_WRITE command from userspace causes the fuseserver to call the AIO completion function. The completion puts thestruct file, queuing a delayed fput to the fuse server task. When thefuse server task returns to userspace, it has to run the delayed fput,which in the case of a fuseblk server, it does synchronously.Sending the FUSE_RELEASE command sychronously from fuse server threadsis a bad idea because a client program can initiate enough simultaneousAIOs such that all the fuse server threads end up in delayed_fput, andnow there aren't any threads left to handle the queued fuse commands.Fix this by only using asynchronous fputs when closing files, and leavea comment explaining why.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: fix general protection fault in __smc_diag_dumpThe syzbot report a crash: Oops: general protection fault, probably for non-canonical address 0xfbd5a5d5a0000003: 0000 [#1] SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0xdead4ead00000018-0xdead4ead0000001f] CPU: 1 UID: 0 PID: 6949 Comm: syz.0.335 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:smc_diag_msg_common_fill net/smc/smc_diag.c:44 [inline] RIP: 0010:__smc_diag_dump.constprop.0+0x3ca/0x2550 net/smc/smc_diag.c:89 Call Trace: smc_diag_dump_proto+0x26d/0x420 net/smc/smc_diag.c:217 smc_diag_dump+0x27/0x90 net/smc/smc_diag.c:234 netlink_dump+0x539/0xd30 net/netlink/af_netlink.c:2327 __netlink_dump_start+0x6d6/0x990 net/netlink/af_netlink.c:2442 netlink_dump_start include/linux/netlink.h:341 [inline] smc_diag_handler_dump+0x1f9/0x240 net/smc/smc_diag.c:251 __sock_diag_cmd net/core/sock_diag.c:249 [inline] sock_diag_rcv_msg+0x438/0x790 net/core/sock_diag.c:285 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5a7/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg net/socket.c:729 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2614 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2668 __sys_sendmsg+0x16d/0x220 net/socket.c:2700 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The process like this: (CPU1) | (CPU2) ---------------------------------|------------------------------- inet_create() | // init clcsock to NULL | sk = sk_alloc() | | // unexpectedly change clcsock | inet_init_csk_locks() | | // add sk to hash table | smc_inet_init_sock() | smc_sk_init() | smc_hash_sk() | | // traverse the hash table | smc_diag_dump_proto | __smc_diag_dump() | // visit wrong clcsock | smc_diag_msg_common_fill() // alloc clcsock | smc_create_clcsk | sock_create_kern |With CONFIG_DEBUG_LOCK_ALLOC=y, the smc->clcsock is unexpectedly changedin inet_init_csk_locks(). The INET_PROTOSW_ICSK flag is no need by smc,just remove it.After removing the INET_PROTOSW_ICSK flag, this patch alse revertcommit 6fd27ea183c2 ("net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC")to avoid casting smc_sock to inet_connection_sock.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing dataThe URB received in gs_usb_receive_bulk_callback() contains a structgs_host_frame. The length of the data after the header depends on thegs_host_frame hf::flags and the active device features (e.g. timestamping).Introduce a new function gs_usb_get_minimum_length() and check that we haveat least received the required amount of data before accessing it. Onlycopy the data to that skb that has actually been received.[mkl: rename gs_usb_get_minimum_length() -> +gs_usb_get_minimum_rx_length()]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing headerThe driver expects to receive a struct gs_host_frame ings_usb_receive_bulk_callback().Use struct_group to describe the header of the struct gs_host_frame andcheck that we have at least received the header before accessing anymembers of it.To resubmit the URB, do not dereference the pointer chain"dev->parent->hf_size_rx" but use "parent->hf_size_rx" instead. Since"urb->context" contains "parent", it is always defined, while "dev" is notdefined if the URB it too short.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:via_wdt: fix critical boot hang due to unnamed resource allocationThe VIA watchdog driver uses allocate_resource() to reserve a MMIOregion for the watchdog control register. However, the allocatedresource was not given a name, which causes the kernel resource treeto contain an entry marked as "" under /proc/iomem on x86platforms.During boot, this unnamed resource can lead to a critical hang becausesubsequent resource lookups and conflict checks fail to handle theinvalid entry properly.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability classified as problematic was found in GNU Binutils 2.45. Affected by this vulnerability is the function copy_section of the file binutils/objcopy.c. The manipulation leads to heap-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The patch is named 08c3cbe5926e4d355b5cb70bbec2b1eeb40c2944. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability, which was classified as problematic, has been found in GNU Binutils 2.45. Affected by this issue is the function bfd_elf_set_group_contents of the file bfd/elf.c. The manipulation leads to out-of-bounds write. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The name of the patch is 41461010eb7c79fee7a9d5f6209accdaac66cc6b. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: sock: fix hardened usercopy panic in sock_recv_errqueueskbuff_fclone_cache was created without defining a usercopy region,[1] unlike skbuff_head_cache which properly whitelists the cb[] field.[2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY isenabled and the kernel attempts to copy sk_buff.cb data to userspacevia sock_recv_errqueue() -> put_cmsg().The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone() (from skbuff_fclone_cache) [1]2. The skb is cloned via skb_clone() using the pre-allocated fclone[3] 3. The cloned skb is queued to sk_error_queue for timestampreporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE)5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb[4] 6. __check_heap_object() fails because skbuff_fclone_cache has no usercopy whitelist [5]When cloned skbs allocated from skbuff_fclone_cache are used in thesocket error queue, accessing the sock_exterr_skb structure in skb->cbvia put_cmsg() triggers a usercopy hardening violation:[ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)![ 5.382796] kernel BUG at mm/usercopy.c:102![ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI[ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7[ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014[ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80[ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490[ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246[ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74[ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0[ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74[ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001[ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00[ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000[ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0[ 5.384903] PKRU: 55555554[ 5.384903] Call Trace:[ 5.384903] [ 5.384903] __check_heap_object+0x9a/0xd0[ 5.384903] __check_object_size+0x46c/0x690[ 5.384903] put_cmsg+0x129/0x5e0[ 5.384903] sock_recv_errqueue+0x22f/0x380[ 5.384903] tls_sw_recvmsg+0x7ed/0x1960[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5[ 5.384903] ? schedule+0x6d/0x270[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5[ 5.384903] ? mutex_unlock+0x81/0xd0[ 5.384903] ? __pfx_mutex_unlock+0x10/0x10[ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10[ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0[ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40[ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5The crash offset 296 corresponds to skb2->cb within skbuff_fclones: - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 - offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 = 272 + 24 (inside sock_exterr_skb.ee)This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure.[1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885[2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104[3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566[4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491[5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nSVM: Check instead of asserting on nested TSC scaling supportCheck for nested TSC scaling support on nested SVM VMRUN instead ofasserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIOhas diverged from KVM's default. Userspace can trigger the WARN at willby writing the MSR and then updating guest CPUID to hide the feature(modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hackingKVM's state_test selftest to do vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0); vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);after restoring state in a new VM+vCPU yields an endless supply of: ------------[ cut here ]------------ WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699 nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd] Call Trace: enter_svm_guest_mode+0x114/0x560 [kvm_amd] nested_svm_vmrun+0x260/0x330 [kvm_amd] vmrun_interception+0x29/0x30 [kvm_amd] svm_invoke_exit_handler+0x35/0x100 [kvm_amd] svm_handle_exit+0xe7/0x180 [kvm_amd] kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm] kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm] __se_sys_ioctl+0x7a/0xc0 __x64_sys_ioctl+0x21/0x30 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x45ca1bNote, the nested #VMEXIT path has the same flaw, but needs a differentfix and will be handled separately.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: fix potential buffer overflow in do_register_framebuffer()The current implementation may lead to buffer overflow when:1. Unregistration creates NULL gaps in registered_fb[]2. All array slots become occupied despite num_registered_fb < FB_MAX3. The registration loop exceeds array boundsAdd boundary check to prevent registered_fb[FB_MAX] access.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:virtio-net: fix received length check in big packetsSince commit 4959aebba8c0 ("virtio-net: use mtu size as buffer lengthfor big packets"), when guest gso is off, the allocated size for bigpackets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends onnegotiated MTU. The number of allocated frags for big packets is storedin vi->big_packets_num_skbfrags.Because the host announced buffer length can be malicious (e.g. the hostvhost_net driver's get_rx_bufs is modified to announce incorrectlength), we need a check in virtio_net receive path. Currently, thecheck is not adapted to the new change which can lead to NULL pagepointer dereference in the below while loop when receiving length thatis larger than the allocated one.This commit fixes the received length check corresponding to the newchange.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to version 2.4.15, a user in the lpadmin group can use the cups web ui to change the config and insert a malicious line. Then the cupsd process which runs as root will parse the new config and cause an out-of-bound write. This issue has been patched in version 2.4.15.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- cups-config < 2.2.7-150000.3.77.1 (version in image is 2.2.7-150000.3.72.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: account for current allocated stack depth in widen_imprecise_scalars()The usage pattern for widen_imprecise_scalars() looks as follows: prev_st = find_prev_entry(env, ...); queued_st = push_stack(...); widen_imprecise_scalars(env, prev_st, queued_st);Where prev_st is an ancestor of the queued_st in the explored statestree. This ancestor is not guaranteed to have same allocated stackdepth as queued_st. E.g. in the following case: def main(): for i in 1..2: foo(i) // same callsite, differnt param def foo(i): if i == 1: use 128 bytes of stack iterator based loopHere, for a second 'foo' call prev_st->allocated_stack is 128,while queued_st->allocated_stack is much smaller.widen_imprecise_scalars() needs to take this into account and avoidaccessing bpf_verifier_state->frame[*]->stack out of bounds.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Fix improper freeing of purex itemIn qla2xxx_process_purls_iocb(), an item is allocated viaqla27xx_copy_multiple_pkt(), which internally callsqla24xx_alloc_purex_item().The qla24xx_alloc_purex_item() function may return a pre-allocated itemfrom a per-adapter pool for small allocations, instead of dynamicallyallocating memory with kzalloc().An error handling path in qla2xxx_process_purls_iocb() incorrectly useskfree() to release the item. If the item was from the pre-allocatedpool, calling kfree() on it is a bug that can lead to memory corruption.Fix this by using the correct deallocation function,qla24xx_free_purex_item(), which properly handles both dynamicallyallocated and pre-allocated items.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: cloud-init through 25.1.2 includes the systemd socket unit cloud-init-hotplugd.socket with default SocketMode that grants 0666 permissions, making it world-writable. This is used for the "/run/cloud-init/hook-hotplug-cmd" FIFO. An unprivileged user could trigger hotplug-hook commands.
Packages affected:
- sle-module-public-cloud-release == 15.7 (version in image is 15.7-150700.28.1).
- cloud-init > 0-0 (version in image is 23.3-150100.8.85.4).
-
Description: Action Pack is a framework for handling and responding to web requests. Starting in version 3.1.0 and prior to versions 6.1.7.9, 7.0.8.5, 7.1.4.1, and 7.2.1.1, there is a possible ReDoS vulnerability in the query parameter filtering routines of Action Dispatch. Carefully crafted query parameters can cause query parameter filtering to take an unexpected amount of time, possibly resulting in a DoS vulnerability. All users running an affected release should either upgrade to version 6.1.7.9, 7.0.8.5, 7.1.4.1, or 7.2.1.1 or apply the relevant patch immediately. One may use Ruby 3.2 as a workaround. Ruby 3.2 has mitigations for this problem, so Rails applications using Ruby 3.2 or newer are unaffected. Rails 8.0.0.beta1 depends on Ruby 3.2 or greater so is unaffected.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-actionpack-5_1 > 0-0 (version in image is 5.1.4-150000.3.32.1).
-
Description: REXML is an XML toolkit for Ruby. The REXML gem before 3.3.9 has a ReDoS vulnerability when it parses an XML that has many digits between &# and x...; in a hex numeric character reference (&#x...;). This does not happen with Ruby 3.2 or later. Ruby 3.1 is the only affected maintained Ruby. The REXML gem 3.3.9 or later include the patch to fix the vulnerability.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: Duplicate SPI HandlingThe issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPINetlink message, which triggers the kernel function xfrm_alloc_spi().This function is expected to ensure uniqueness of the Security ParameterIndex (SPI) for inbound Security Associations (SAs). However, it canreturn success even when the requested SPI is already in use, leadingto duplicate SPIs assigned to multiple inbound SAs, differentiatedonly by their destination addresses.This behavior causes inconsistencies during SPI lookups for inbound packets.Since the lookup may return an arbitrary SA among those with the same SPI,packet processing can fail, resulting in packet drops.According to RFC 4301 section 4.4.2 , for inbound processing a unicast SAis uniquely identified by the SPI and optionally protocol.Reproducing the Issue Reliably:To consistently reproduce the problem, restrict the available SPI range incharon.conf : spi_min = 0x10000000 spi_max = 0x10000002This limits the system to only 2 usable SPI values.Next, create more than 2 Child SA. each using unique pair of src/dst address.As soon as the 3rd Child SA is initiated, it will be assigned a duplicateSPI, since the SPI pool is already exhausted.With a narrow SPI range, the issue is consistently reproducible.With a broader/default range, it becomes rare and unpredictable.Current implementation:xfrm_spi_hash() lookup function computes hash using daddr, proto, and family.So if two SAs have the same SPI but different destination addresses, thenthey will:a. Hash into different bucketsb. Be stored in different linked lists (byspi + h)c. Not be seen in the same hlist_for_each_entry_rcu() iteration.As a result, the lookup will result in NULL and kernel allows that Duplicate SPIProposed Change:xfrm_state_lookup_spi_proto() does a truly global search - across all states,regardless of hash bucket and matches SPI and proto.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to version 2.4.15, a client that connects to cupsd but sends slow messages, e.g. only one byte per second, delays cupsd as a whole, such that it becomes unusable by other clients. This issue has been patched in version 2.4.15.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- cups-config < 2.2.7-150000.3.83.1 (version in image is 2.2.7-150000.3.72.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:inet: frags: flush pending skbs in fqdir_pre_exit()We have been seeing occasional deadlocks on pernet_ops_rwsem sinceSeptember in NIPA. The stuck task was usually modprobe (often loadinga driver like ipvlan), trying to take the lock as a Writer.lockdep does not track readers for rwsems so the read wasn't obviousfrom the reports.On closer inspection the Reader holding the lock was conntrack loopingforever in nf_conntrack_cleanup_net_list(). Based on past experiencewith occasional NIPA crashes I looked thru the tests which run beforethe crash and noticed that the crash follows ip_defrag.sh. An immediatered flag. Scouring thru (de)fragmentation queues reveals skbs sittingaround, holding conntrack references.The problem is that since conntrack depends on nf_defrag_ipv6,nf_defrag_ipv6 will load first. Since nf_defrag_ipv6 loads first itsnetns exit hooks run _after_ conntrack's netns exit hook.Flush all fragment queue SKBs during fqdir_pre_exit() to releaseconntrack references before conntrack cleanup runs. Also flushthe queues in timer expiry handlers when they discover fqdir->deadis set, in case packet sneaks in while we're running the pre_exitflush.The commit under Fixes is not exactly the culprit, but I thinkpreviously the timer firing would eventually unblock the spinningconntrack.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bnxt_en: Fix XDP_TX pathFor XDP_TX action in bnxt_rx_xdp(), clearing of the event flags is notcorrect. __bnxt_poll_work() -> bnxt_rx_pkt() -> bnxt_rx_xdp() may belooping within NAPI and some event flags may be set in earlieriterations. In particular, if BNXT_TX_EVENT is set earlier indicatingsome XDP_TX packets are ready and pending, it will be cleared if it isXDP_TX action again. Normally, we will set BNXT_TX_EVENT again when wesuccessfully call __bnxt_xmit_xdp(). But if the TX ring has no moreroom, the flag will not be set. This will cause the TX producer to beahead but the driver will not hit the TX doorbell.For multi-buf XDP_TX, there is no need to clear the event flags and setBNXT_AGG_EVENT. The BNXT_AGG_EVENT flag should have been set earlier inbnxt_rx_pkt().The visible symptom of this is that the RX ring associated with theTX XDP ring will eventually become empty and all packets will be dropped.Because this condition will cause the driver to not refill the RX ringseeing that the TX ring has forever pending XDP_TX packets.The fix is to only clear BNXT_RX_EVENT when we have successfullycalled __bnxt_xmit_xdp().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/hsr: fix NULL pointer dereference in prp_get_untagged_frame()prp_get_untagged_frame() calls __pskb_copy() to create frame->skb_stdbut doesn't check if the allocation failed. If __pskb_copy() returnsNULL, skb_clone() is called with a NULL pointer, causing a crash:Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTIKASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]CPU: 0 UID: 0 PID: 5625 Comm: syz.1.18 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014RIP: 0010:skb_clone+0xd7/0x3a0 net/core/skbuff.c:2041Code: 03 42 80 3c 20 00 74 08 4c 89 f7 e8 23 29 05 f9 49 83 3e 00 0f 85 a0 01 00 00 e8 94 dd 9d f8 48 8d 6b 7e 49 89 ee 49 c1 ee 03 <43> 0f b6 04 26 84 c0 0f 85 d1 01 00 00 44 0f b6 7d 00 41 83 e7 0cRSP: 0018:ffffc9000d00f200 EFLAGS: 00010207RAX: ffffffff892235a1 RBX: 0000000000000000 RCX: ffff88803372a480RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000000RBP: 000000000000007e R08: ffffffff8f7d0f77 R09: 1ffffffff1efa1eeR10: dffffc0000000000 R11: fffffbfff1efa1ef R12: dffffc0000000000R13: 0000000000000820 R14: 000000000000000f R15: ffff88805144cc00FS: 0000555557f6d500(0000) GS:ffff88808d72f000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000555581d35808 CR3: 000000005040e000 CR4: 0000000000352ef0Call Trace: hsr_forward_do net/hsr/hsr_forward.c:-1 [inline] hsr_forward_skb+0x1013/0x2860 net/hsr/hsr_forward.c:741 hsr_handle_frame+0x6ce/0xa70 net/hsr/hsr_slave.c:84 __netif_receive_skb_core+0x10b9/0x4380 net/core/dev.c:5966 __netif_receive_skb_one_core net/core/dev.c:6077 [inline] __netif_receive_skb+0x72/0x380 net/core/dev.c:6192 netif_receive_skb_internal net/core/dev.c:6278 [inline] netif_receive_skb+0x1cb/0x790 net/core/dev.c:6337 tun_rx_batched+0x1b9/0x730 drivers/net/tun.c:1485 tun_get_user+0x2b65/0x3e90 drivers/net/tun.c:1953 tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f0449f8e1ffCode: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 f9 92 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 4c 93 02 00 48RSP: 002b:00007ffd7ad94c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001RAX: ffffffffffffffda RBX: 00007f044a1e5fa0 RCX: 00007f0449f8e1ffRDX: 000000000000003e RSI: 0000200000000500 RDI: 00000000000000c8RBP: 00007ffd7ad94d20 R08: 0000000000000000 R09: 0000000000000000R10: 000000000000003e R11: 0000000000000293 R12: 0000000000000001R13: 00007f044a1e5fa0 R14: 00007f044a1e5fa0 R15: 0000000000000003 Add a NULL check immediately after __pskb_copy() to handle allocationfailures gracefully.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In GnuPG through 2.4.8, if a signed message has \f at the end of a plaintext line, an adversary can construct a modified message that places additional text after the signed material, such that signature verification of the modified message succeeds (although an "invalid armor" message is printed during verification). This is related to use of \f as a marker to denote truncation of a long plaintext line.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- gpg2 > 0-0 (version in image is 2.4.4-150600.3.9.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fallback earlier on simult connectionSyzkaller reports a simult-connect race leading to inconsistent fallbackstatus: WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Modules linked in: CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6 RSP: 0018:ffffc900006cf338 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900 R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0 Call Trace: tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197 tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922 tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672 tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918 ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500 dst_input include/net/dst.h:471 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979 __netif_receive_skb+0x1d/0x160 net/core/dev.c:6092 process_backlog+0x442/0x15e0 net/core/dev.c:6444 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494 napi_poll net/core/dev.c:7557 [inline] net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684 handle_softirqs+0x216/0x8e0 kernel/softirq.c:579 run_ksoftirqd kernel/softirq.c:968 [inline] run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960 smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160 kthread+0x3c2/0x780 kernel/kthread.c:463 ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 The TCP subflow can process the simult-connect syn-ack packet aftertransitioning to TCP_FIN1 state, bypassing the MPTCP fallback check,as the sk_state_change() callback is not invoked for * -> FIN_WAIT1transitions.That will move the msk socket to an inconsistent status and the nextincoming data will hit the reported splat.Close the race moving the simult-fallback check at the earliest possiblestage - that is at syn-ack generation time.About the fixes tags: [2] was supposed to also fix this issue introducedby [3]. [1] is required as a dependence: it was not explicitly marked asa fix, but it is one and it has already been backported before [3]. Inother words, this commit should be backported up to [3], including [2]and [1] if that's not already there.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:x86/MCE: Always save CS register on AMD Zen IF Poison errorsThe Instruction Fetch (IF) units on current AMD Zen-based systems do notguarantee a synchronous #MC is delivered for poison consumption errors.Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, themicroarchitecture does guarantee that the exception is delivered withinthe same context. In other words, the exact rIP is not known, but thecontext is known to not have changed.There is no architecturally-defined method to determine this behavior.The Code Segment (CS) register is always valid on such IF unit poisonerrors regardless of the value of MCG_STATUS[EIPV|RIPV].Add a quirk to save the CS register for poison consumption from the IFunit banks.This is needed to properly determine the context of the error.Otherwise, the severity grading function will assume the context isIN_KERNEL due to the m->cs value being 0 (the initialized value). Thisleads to unnecessary kernel panics on data poison errors due to thekernel believing the poison consumption occurred in kernel context.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan()In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directlyused in memcpy(), which may lead to a NULL pointer dereference onfailure of kzalloc().Fix this bug by adding a check of arg.extraie.ptr.Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: plug races between subflow fail and subflow creationWe have races similar to the one addressed by the previous patch betweensubflow failing and additional subflow creation. They are just harder totrigger.The solution is similar. Use a separate flag to track the condition'socket state prevent any additional subflow creation' protected by thefallback lock.The socket fallback makes such flag true, and also receiving or sendingan MP_FAIL option.The field 'allow_infinite_fallback' is now always touched under therelevant lock, we can drop the ONCE annotation on write.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocatedIn case of an ib_fast_reg_mr allocation failure during iSER setup, themachine hits a panic because iscsi_conn->dd_data is initializedunconditionally, even when no memory is allocated (dd_size == 0). Thisleads invalid pointer dereference during connection teardown.Fix by setting iscsi_conn->dd_data only if memory is actually allocated.Panic trace:------------ iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12 iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers BUG: unable to handle page fault for address: fffffffffffffff8 RIP: 0010:swake_up_locked.part.5+0xa/0x40 Call Trace: complete+0x31/0x40 iscsi_iser_conn_stop+0x88/0xb0 [ib_iser] iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi] iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi] iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi] ? netlink_lookup+0x12f/0x1b0 ? netlink_deliver_tap+0x2c/0x200 netlink_unicast+0x1ab/0x280 netlink_sendmsg+0x257/0x4f0 ? _copy_from_user+0x29/0x60 sock_sendmsg+0x5f/0x70
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: mvsas: Fix use-after-free bugs in mvs_work_queueDuring the detaching of Marvell's SAS/SATA controller, the original codecalls cancel_delayed_work() in mvs_free() to cancel the delayed workitem mwq->work_q. However, if mwq->work_q is already running, thecancel_delayed_work() may fail to cancel it. This can lead touse-after-free scenarios where mvs_free() frees the mvs_info whilemvs_work_queue() is still executing and attempts to access thealready-freed mvs_info.A typical race condition is illustrated below:CPU 0 (remove) | CPU 1 (delayed work callback)mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAFReplace cancel_delayed_work() with cancel_delayed_work_sync() to ensurethat the delayed work item is properly canceled and any executingdelayed work item completes before the mvs_info is deallocated.This bug was found by static analysis.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:spi: cadence-quadspi: Implement refcount to handle unbind during busydriver support indirect read and indirect write operation withassumption no force device removal(unbind) operation. Howeverforce device removal(removal) is still available to root superuser.Unbinding driver during operation causes kernel crash. This changesensure driver able to handle such operation for indirect read andindirect write by implementing refcount to track attached devicesto the controller and gracefully wait and until attached devicesremove operation completed before proceed with removal operation.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/sched: Fix potential double free in drm_sched_job_add_resv_dependenciesWhen adding dependencies with drm_sched_job_add_dependency(), thatfunction consumes the fence reference both on success and failure, so inthe latter case the dma_fence_put() on the error path (xarray failed toexpand) is a double free.Interestingly this bug appears to have been present ever sincecommit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the codeback then looked like this:drm_sched_job_add_implicit_dependencies():... for (i = 0; i < fence_count; i++) { ret = drm_sched_job_add_dependency(job, fences[i]); if (ret) break; } for (; i < fence_count; i++) dma_fence_put(fences[i]);Which means for the failing 'i' the dma_fence_put was already a doublefree. Possibly there were no users at that time, or the test cases wereinsufficient to hit it.The bug was then only noticed and fixed aftercommit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")landed, with its fixup ofcommit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").At that point it was a slightly different flavour of a double free, whichcommit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")noticed and attempted to fix.But it only moved the double free from happening inside thedrm_sched_job_add_dependency(), when releasing the reference not yetobtained, to the caller, when releasing the reference already released bythe former in the failure case.As such it is not easy to identify the right target for the fixes tag solets keep it simple and just continue the chain.While fixing we also improve the comment and explain the reason for takingthe reference and not dropping it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Reject negative offsets for ALU opsWhen verifying BPF programs, the check_alu_op() function validatesinstructions with ALU operations. The 'offset' field in theseinstructions is a signed 16-bit integer.The existing check 'insn->off > 1' was intended to ensure the offset iseither 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' issigned, this check incorrectly accepts all negative values (e.g., -1).This commit tightens the validation by changing the condition to'(insn->off != 0 && insn->off != 1)'. This ensures that any valueother than the explicitly permitted 0 and 1 is rejected, hardening theverifier against malformed BPF programs.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: Rack is a modular Ruby web server interface. Prior to versions 2.2.20, 3.1.18, and 3.2.3, a possible information disclosure vulnerability existed in `Rack::Sendfile` when running behind a proxy that supports `x-sendfile` headers (such as Nginx). Specially crafted headers could cause `Rack::Sendfile` to miscommunicate with the proxy and trigger unintended internal requests, potentially bypassing proxy-level access restrictions. When `Rack::Sendfile` received untrusted `x-sendfile-type` or `x-accel-mapping` headers from a client, it would interpret them as proxy configuration directives. This could cause the middleware to send a "redirect" response to the proxy, prompting it to reissue a new internal request that was not subject to the proxy's access controls. An attacker could exploit this by setting a crafted `x-sendfile-type: x-accel-redirect` header, setting a crafted `x-accel-mapping` header, and requesting a path that qualifies for proxy-based acceleration. Attackers could bypass proxy-enforced restrictions and access internal endpoints intended to be protected (such as administrative pages). The vulnerability did not allow arbitrary file reads but could expose sensitive application routes. This issue only affected systems meeting all of the following conditions: The application used `Rack::Sendfile` with a proxy that supports `x-accel-redirect` (e.g., Nginx); the proxy did **not** always set or remove the `x-sendfile-type` and `x-accel-mapping` headers; and the application exposed an endpoint that returned a body responding to `.to_path`. Users should upgrade to Rack versions 2.2.20, 3.1.18, or 3.2.3, which require explicit configuration to enable `x-accel-redirect`. Alternatively, configure the proxy to always set or strip the header, or in Rails applications, disable sendfile completely.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-rack < 2.2.20-150000.3.34.1 (version in image is 2.0.8-150000.3.31.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: ipc: fix use-after-free in ipc_msg_send_requestipc_msg_send_request() waits for a generic netlink reply using anipc_msg_table_entry on the stack. The generic netlink handler(handle_generic_event()/handle_response()) fills entry->response underipc_msg_table_lock, but ipc_msg_send_request() used to validate and freeentry->response without holding the same lock.Under high concurrency this allows a race where handle_response() iscopying data into entry->response while ipc_msg_send_request() has justfreed it, leading to a slab-use-after-free reported by KASAN inhandle_generic_event(): BUG: KASAN: slab-use-after-free in handle_generic_event+0x3c4/0x5f0 [ksmbd] Write of size 12 at addr ffff888198ee6e20 by task pool/109349 ... Freed by task: kvfree ipc_msg_send_request [ksmbd] ksmbd_rpc_open -> ksmbd_session_rpc_open [ksmbd]Fix by:- Taking ipc_msg_table_lock in ipc_msg_send_request() while validating entry->response, freeing it when invalid, and removing the entry from ipc_msg_table.- Returning the final entry->response pointer to the caller only after the hash entry is removed under the lock.- Returning NULL in the error path, preserving the original API semantics.This makes all accesses to entry->response consistent withhandle_response(), which already updates and fills the response bufferunder ipc_msg_table_lock, and closes the race that allowed the UAF.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nvme: fix admin request_queue lifetimeThe namespaces can access the controller's admin request_queue, andstale references on the namespaces may exist after tearing down thecontroller. Ensure the admin request_queue is active by moving thecontroller's 'put' to after all controller references have been releasedto ensure no one is can access the request_queue. This fixes a reporteduse-after-free bug: BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0 Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287 CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15 Tainted: [E]=UNSIGNED_MODULE Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025 Call Trace: dump_stack_lvl+0x4f/0x60 print_report+0xc4/0x620 ? _raw_spin_lock_irqsave+0x70/0xb0 ? _raw_read_unlock_irqrestore+0x30/0x30 ? blk_queue_enter+0x41c/0x4a0 kasan_report+0xab/0xe0 ? blk_queue_enter+0x41c/0x4a0 blk_queue_enter+0x41c/0x4a0 ? __irq_work_queue_local+0x75/0x1d0 ? blk_queue_start_drain+0x70/0x70 ? irq_work_queue+0x18/0x20 ? vprintk_emit.part.0+0x1cc/0x350 ? wake_up_klogd_work_func+0x60/0x60 blk_mq_alloc_request+0x2b7/0x6b0 ? __blk_mq_alloc_requests+0x1060/0x1060 ? __switch_to+0x5b7/0x1060 nvme_submit_user_cmd+0xa9/0x330 nvme_user_cmd.isra.0+0x240/0x3f0 ? force_sigsegv+0xe0/0xe0 ? nvme_user_cmd64+0x400/0x400 ? vfs_fileattr_set+0x9b0/0x9b0 ? cgroup_update_frozen_flag+0x24/0x1c0 ? cgroup_leave_frozen+0x204/0x330 ? nvme_ioctl+0x7c/0x2c0 blkdev_ioctl+0x1a8/0x4d0 ? blkdev_common_ioctl+0x1930/0x1930 ? fdget+0x54/0x380 __x64_sys_ioctl+0x129/0x190 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f765f703b0b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000 R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003 R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdumpDo not block PCI config accesses through pci_cfg_access_lock() whenexecuting the s390 variant of PCI error recovery: Acquire justdevice_lock() instead of pci_dev_lock() as powerpc's EEH andgenerig PCI AER processing do.During error recovery testing a pair of tasks was reported to be hung:mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not workingINFO: task kmcheck:72 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<000000065256f572>] schedule_preempt_disabled+0x22/0x30 [<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8 [<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core] [<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core] [<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398 [<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<0000000652172e28>] pci_wait_cfg+0x80/0xe8 [<0000000652172f94>] pci_cfg_access_lock+0x74/0x88 [<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core] [<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core] [<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core] [<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168 [<0000000652513212>] devlink_health_report+0x19a/0x230 [<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core]No kernel log of the exact same error with an upstream kernel isavailable - but the very same deadlock situation can be constructed there,too:- task: kmcheck mlx5_unload_one() tries to acquire devlink lock while the PCI error recovery code has set pdev->block_cfg_access by way of pci_cfg_access_lock()- task: kworker mlx5_crdump_collect() tries to set block_cfg_access through pci_cfg_access_lock() while devlink_health_report() had acquired the devlink lock.A similar deadlock situation can be reproduced by requesting acrdump with > devlink health dump show pci/ reporter fw_fatalwhile PCI error recovery is executed on the same physical functionby mlx5_core's pci_error_handlers. On s390 this can be injected with > zpcictl --reset-fw Tests with this patch failed to reproduce that second deadlock situation,the devlink command is rejected with "kernel answers: Permission denied" -and we get a kernel log message of:mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5because the config read of VSC_SEMAPHORE is rejected by the underlyinghardware.Two prior attempts to address this issue have been discussed andultimately rejected [see link], with the primary argument that s390'simplementation of PCI error recovery is imposing restrictions thatneither powerpc's EEH nor PCI AER handling need. Tests show that PCIerror recovery on s390 is running to completion even without blockingaccess to PCI config space.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ethtool: Avoid overflowing userspace buffer on stats queryThe ethtool -S command operates across three ioctl calls:ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, andETHTOOL_GSTATS for the values.If the number of stats changes between these calls (e.g., due to devicereconfiguration), userspace's buffer allocation will be incorrect,potentially leading to buffer overflow.Drivers are generally expected to maintain stable stat counts, but somedrivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, makingthis scenario possible.Some drivers try to handle this internally:- bnad_get_ethtool_stats() returns early in case stats.n_stats is not equal to the driver's stats count.- micrel/ksz884x also makes sure not to write anything beyond stats.n_stats and overflow the buffer.However, both use stats.n_stats which is already assigned with the valuereturned from get_sset_count(), hence won't solve the issue describedhere.Change ethtool_get_strings(), ethtool_get_stats(),ethtool_get_phy_stats() to not return anything in case of a mismatchbetween userspace's size and get_sset_size(), to prevent bufferoverflow.The returned n_stats value will be equal to zero, to reflect thatnothing has been returned.This could result in one of two cases when using upstream ethtool,depending on when the size change is detected:1. When detected in ethtool_get_strings(): # ethtool -S eth2 no stats available2. When detected in get stats, all stats will be reported as zero.Both cases are presumably transient, and a subsequent ethtool callshould succeed.Other than the overflow avoidance, these two cases are very evident (nooutput/cleared stats), which is arguably better than presentingincorrect/shifted stats.I also considered returning an error instead of a "silent" response, butthat seems more destructive towards userspace apps.Notes:- This patch does not claim to fix the inherent race, it only makes sure that we do not overflow the userspace buffer, and makes for a more predictable behavior.- RTNL lock is held during each ioctl, the race window exists between the separate ioctl calls when the lock is released.- Userspace ethtool always fills stats.n_stats, but it is likely that these stats ioctls are implemented in other userspace applications which might not fill it. The added code checks that it's not zero, to prevent any regressions.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ax25: properly unshare skbs in ax25_kiss_rcv()Bernard Pidoux reported a regression apparently caused by commitc353e8983e0d ("net: introduce per netns packet chains").skb->dev becomes NULL and we crash in __netif_receive_skb_core().Before above commit, different kind of bugs or corruptions could happenwithout a major crash.But the root cause is that ax25_kiss_rcv() can queue/mangle input skbwithout checking if this skb is shared or not.Many thanks to Bernard Pidoux for his help, diagnosis and tests.We had a similar issue years ago fixed with commit 7aaed57c5c28("phonet: properly unshare skbs in phonet_rcv()").
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:landlock: Fix handling of disconnected directoriesDisconnected files or directories can appear when they are visible andopened from a bind mount, but have been renamed or moved from the sourceof the bind mount in a way that makes them inaccessible from the mountpoint (i.e. out of scope).Previously, access rights tied to files or directories opened through adisconnected directory were collected by walking the related hierarchydown to the root of the filesystem, without taking into account themount point because it couldn't be found. This could lead toinconsistent access results, potential access right widening, andhard-to-debug renames, especially since such paths cannot be printed.For a sandboxed task to create a disconnected directory, it needs tohave write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) tothe underlying source of the bind mount, and read access to the relatedmount point. Because a sandboxed task cannot acquire more accessrights than those defined by its Landlock domain, this could lead toinconsistent access rights due to missing permissions that should beinherited from the mount point hierarchy, while inheriting permissionsfrom the filesystem hierarchy hidden by this mount point instead.Landlock now handles files and directories opened from disconnecteddirectories by taking into account the filesystem hierarchy when themount point is not found in the hierarchy walk, and also always takinginto account the mount point from which these disconnected directorieswere opened. This ensures that a rename is not allowed if it wouldwiden access rights [1].The rationale is that, even if disconnected hierarchies might not bevisible or accessible to a sandboxed task, relying on the collectedaccess rights from them improves the guarantee that access rights willnot be widened during a rename because of the access right comparisonbetween the source and the destination (see LANDLOCK_ACCESS_FS_REFER).It may look like this would grant more access on disconnected files anddirectories, but the security policies are always enforced for all theevaluated hierarchies. This new behavior should be less surprising tousers and safer from an access control perspective.Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() andfix the related comment.Because opened files have their access rights stored in the related filesecurity properties, there is no impact for disconnected or unlinkedfiles.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iavf: fix off-by-one issues in iavf_config_rss_reg()There are off-by-one bugs when configuring RSS hash key and lookuptable, causing out-of-bounds reads to memory [1] and out-of-boundswrites to device registers.Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"),the loop upper bounds were: i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEXwhich is safe since the value is the last valid index.That commit changed the bounds to: i <= adapter->rss_{key,lut}_size / 4where `rss_{key,lut}_size / 4` is the number of dwords, so the lastvalid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=`accesses one element past the end.Fix the issues by using `<` instead of `<=`, ensuring we do not exceedthe bounds.[1] KASAN splat about rss_key_size off-by-one BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800 Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63 CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: iavf iavf_watchdog_task Call Trace: dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x1a0 iavf_config_rss+0x619/0x800 iavf_watchdog_task+0x2be7/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 Allocated by task 63: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x246/0x6f0 iavf_watchdog_task+0x28fc/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff888102c50100 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes to the right of allocated 52-byte region [ffff888102c50100, ffff888102c50134) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x102c50 flags: 0x200000000000000(node=0|zone=2) page_type: f5(slab) raw: 0200000000000000 ffff8881000418c0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc >ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ^ ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scs: fix a wrong parameter in __scs_magic__scs_magic() needs a 'void *' variable, but a 'struct task_struct *' isgiven. 'task_scs(tsk)' is the starting address of the task's shadow callstack, and '__scs_magic(task_scs(tsk))' is the end address of the task'sshadow call stack. Here should be '__scs_magic(task_scs(tsk))'.The user-visible effect of this bug is that when CONFIG_DEBUG_STACK_USAGEis enabled, the shadow call stack usage checking function(scs_check_usage) would scan an incorrect memory range. This could lead1. **Inaccurate stack usage reporting**: The function would calculate wrong usage statistics for the shadow call stack, potentially showing incorrect value in kmsg.2. **Potential kernel crash**: If the value of __scs_magic(tsk)is greater than that of __scs_magic(task_scs(tsk)), the for loop may access unmapped memory, potentially causing a kernel panic. However, this scenario is unlikely because task_struct is allocated via the slab allocator (which typically returns lower addresses), while the shadow call stack returned by task_scs(tsk) is allocated via vmalloc(which typically returns higher addresses).However, since this is purely a debugging feature(CONFIG_DEBUG_STACK_USAGE), normal production systems should be notunaffected. The bug only impacts developers and testers who are activelydebugging stack usage with this configuration enabled.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: make sure skb->len != 0 when redirecting to a tunneling devicesyzkaller managed to trigger another case where skb->len == 0when we enter __dev_queue_xmit:WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline]WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295Call Trace: dev_queue_xmit+0x17/0x20 net/core/dev.c:4406 __bpf_tx_skb net/core/filter.c:2115 [inline] __bpf_redirect_no_mac net/core/filter.c:2140 [inline] __bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163 ____bpf_clone_redirect net/core/filter.c:2447 [inline] bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419 bpf_prog_48159a89cb4a9a16+0x59/0x5e bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline] __bpf_prog_run include/linux/filter.h:596 [inline] bpf_prog_run include/linux/filter.h:603 [inline] bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402 bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170 bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648 __sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005 __do_sys_bpf kernel/bpf/syscall.c:5091 [inline] __se_sys_bpf kernel/bpf/syscall.c:5089 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x61/0xc6The reproducer doesn't really reproduce outside of syzkallerenvironment, so I'm taking a guess here. It looks like wedo generate correct ETH_HLEN-sized packet, but we redirectthe packet to the tunneling device. Before we do so, we__skb_pull l2 header and arrive again at skb->len == 0.Doesn't seem like we can do anything better than havingan explicit check after __skb_pull?
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:devlink: hold region lock when flushing snapshotsNetdevsim triggers a splat on reload, when it destroys regionswith snapshots pending: WARNING: CPU: 1 PID: 787 at net/core/devlink.c:6291 devlink_region_snapshot_del+0x12e/0x140 CPU: 1 PID: 787 Comm: devlink Not tainted 6.1.0-07460-g7ae9888d6e1c #580 RIP: 0010:devlink_region_snapshot_del+0x12e/0x140 Call Trace: devl_region_destroy+0x70/0x140 nsim_dev_reload_down+0x2f/0x60 [netdevsim] devlink_reload+0x1f7/0x360 devlink_nl_cmd_reload+0x6ce/0x860 genl_family_rcv_msg_doit.isra.0+0x145/0x1c0This is the locking assert in devlink_region_snapshot_del(),we're supposed to be holding the region->snapshot_lock here.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: visconti: Fix memory leak in visconti_register_pll()@pll->rate_table has allocated memory by kmemdup(), if clk_hw_register()fails, it should be freed, otherwise it will cause memory leak issue,this patch fixes it.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A flaw was found in the Linux kernel's IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: add NULL check in xfrm_update_ae_paramsNormally, x->replay_esn and x->preplay_esn should be allocated atxfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence thexfrm_update_ae_params(...) is okay to update them. However, the currentimplementation of xfrm_new_ae(...) allows a malicious user to directlydereference a NULL pointer and crash the kernel like below.BUG: kernel NULL pointer dereference, address: 0000000000000000PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0Oops: 0002 [#1] PREEMPT SMP KASAN NOPTICPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 #8Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4RIP: 0010:memcpy_orig+0xad/0x140Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 cRSP: 0018:ffff888008f57658 EFLAGS: 00000202RAX: 0000000000000000 RBX: ffff888008bd0000 RCX: ffffffff8238e571RDX: 0000000000000018 RSI: ffff888007f64844 RDI: 0000000000000000RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000000 R12: ffff888008f57818R13: ffff888007f64aa4 R14: 0000000000000000 R15: 0000000000000000FS: 00000000014013c0(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000000000000000 CR3: 00000000054d8000 CR4: 00000000000006f0Call Trace: ? __die+0x1f/0x70 ? page_fault_oops+0x1e8/0x500 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? fixup_exception+0x36/0x460 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? exc_page_fault+0x5e/0xc0 ? asm_exc_page_fault+0x26/0x30 ? xfrm_update_ae_params+0xd1/0x260 ? memcpy_orig+0xad/0x140 ? __pfx__raw_spin_lock_bh+0x10/0x10 xfrm_update_ae_params+0xe7/0x260 xfrm_new_ae+0x298/0x4e0 ? __pfx_xfrm_new_ae+0x10/0x10 ? __pfx_xfrm_new_ae+0x10/0x10 xfrm_user_rcv_msg+0x25a/0x410 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __alloc_skb+0xcf/0x210 ? stack_trace_save+0x90/0xd0 ? filter_irq_stacks+0x1c/0x70 ? __stack_depot_save+0x39/0x4e0 ? __kasan_slab_free+0x10a/0x190 ? kmem_cache_free+0x9c/0x340 ? netlink_recvmsg+0x23c/0x660 ? sock_recvmsg+0xeb/0xf0 ? __sys_recvfrom+0x13c/0x1f0 ? __x64_sys_recvfrom+0x71/0x90 ? do_syscall_64+0x3f/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc ? copyout+0x3e/0x50 netlink_rcv_skb+0xd6/0x210 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_sock_has_perm+0x10/0x10 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 xfrm_netlink_rcv+0x44/0x50 netlink_unicast+0x36f/0x4c0 ? __pfx_netlink_unicast+0x10/0x10 ? netlink_recvmsg+0x500/0x660 netlink_sendmsg+0x3b7/0x700This Null-ptr-deref bug is assigned CVE-2023-3772. And this commitadds additional NULL check in xfrm_update_ae_params to fix the NPD.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Pointer may be dereferencedKlocwork tool reported pointer 'rport' returned from call to functionfc_bsg_to_rport() may be NULL and will be dereferenced.Add a fix to validate rport before dereferencing.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid10: prevent soft lockup while flush writesCurrently, there is no limit for raid1/raid10 plugged bio. While flushingwrites, raid1 has cond_resched() while raid10 doesn't, and too manywrites can cause soft lockup.Follow up soft lockup can be triggered easily with writeback test forraid10 with ramdisks:watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]Call Trace: call_rcu+0x16/0x20 put_object+0x41/0x80 __delete_object+0x50/0x90 delete_object_full+0x2b/0x40 kmemleak_free+0x46/0xa0 slab_free_freelist_hook.constprop.0+0xed/0x1a0 kmem_cache_free+0xfd/0x300 mempool_free_slab+0x1f/0x30 mempool_free+0x3a/0x100 bio_free+0x59/0x80 bio_put+0xcf/0x2c0 free_r10bio+0xbf/0xf0 raid_end_bio_io+0x78/0xb0 one_write_done+0x8a/0xa0 raid10_end_write_request+0x1b4/0x430 bio_endio+0x175/0x320 brd_submit_bio+0x3b9/0x9b7 [brd] __submit_bio+0x69/0xe0 submit_bio_noacct_nocheck+0x1e6/0x5a0 submit_bio_noacct+0x38c/0x7e0 flush_pending_writes+0xf0/0x240 raid10d+0xac/0x1ed0Fix the problem by adding cond_resched() to raid10 like what raid1 did.Note that unlimited plugged bio still need to be optimized, for example,in the case of lots of dirty pages writeback, this will take lots ofmemory and io will spend a long time in plug, hence io latency is bad.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix calltrace warning in amddrm_buddy_finiThe following call trace is observed when removing the amdgpu driver, whichis caused by that BOs allocated for psp are not freed until removing.[61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy][61811.450577] Call Trace:[61811.450577] [61811.450579] amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu][61811.450728] amdgpu_ttm_fini+0x207/0x290 [amdgpu][61811.450870] amdgpu_bo_fini+0x27/0xa0 [amdgpu][61811.451012] gmc_v9_0_sw_fini+0x4a/0x60 [amdgpu][61811.451166] amdgpu_device_fini_sw+0x117/0x520 [amdgpu][61811.451306] amdgpu_driver_release_kms+0x16/0x30 [amdgpu][61811.451447] devm_drm_dev_init_release+0x4d/0x80 [drm][61811.451466] devm_action_release+0x15/0x20[61811.451469] release_nodes+0x40/0xb0[61811.451471] devres_release_all+0x9b/0xd0[61811.451473] __device_release_driver+0x1bb/0x2a0[61811.451476] driver_detach+0xf3/0x140[61811.451479] bus_remove_driver+0x6c/0xf0[61811.451481] driver_unregister+0x31/0x60[61811.451483] pci_unregister_driver+0x40/0x90[61811.451486] amdgpu_exit+0x15/0x447 [amdgpu]For smu v13_0_2, if the GPU supports xgmi, refer tocommit f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2"),it will run gpu recover in AMDGPU_RESET_FOR_DEVICE_REMOVE mode when removing,which makes all devices in hive list have hw reset but no resume except thebasic ip blocks, then other ip blocks will not call .hw_fini according toip_block.status.hw.Since psp_free_shared_bufs just includes some software operations, so moveit to psp_sw_fini.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix null pointer dereference in tracing_err_log_open()Fix an issue in function 'tracing_err_log_open'.The function doesn't call 'seq_open' if the file is opened only withwrite permissions, which results in 'file->private_data' being left as null.If we then use 'lseek' on that opened file, 'seq_lseek' dereferences'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic.Writing to this node requires root privileges, therefore this bughas very little security impact.Tracefs node: /sys/kernel/tracing/error_logExample Kernel panic:Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02)---[ end trace 561d1b49c12cf8a5 ]---Kernel panic - not syncing: Oops: Fatal exception
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: dsa: Removed unneeded of_node_put in felix_parse_ports_nodeRemove unnecessary of_node_put from the continue path to preventchild node from being released twice, which could avoid resourceleak or other unexpected issues.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: core: Fix possible memory leak if device_add() failsIf device_add() returns error, the name allocated by dev_set_name() needsbe freed. As the comment of device_add() says, put_device() should be usedto decrease the reference count in the error path. So fix this by callingput_device(), then the name can be freed in kobject_cleanp().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernationWhen a Linux VM with an assigned PCI device runs on Hyper-V, if the PCIdevice driver is not loaded yet (i.e. MSI-X/MSI is not enabled on thedevice yet), doing a VM hibernation triggers a panic inhv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), becausepdev->dev.msi.data is still NULL.Avoid the panic by checking if MSI-X/MSI is enabled.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: hi846: fix usage of pm_runtime_get_if_in_use()pm_runtime_get_if_in_use() does not only return nonzero values whenthe device is in use, it can return a negative errno too.And especially during resuming from system suspend, when runtime pmis not yet up again, -EAGAIN is being returned, so the subsequentpm_runtime_put() call results in a refcount underflow.Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.cThe missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet canlead to the use of wrong `CIDR_POS(c)` for calculating array offsets,which can lead to integer underflow. As a result, it leads to slabout-of-bound access.This patch adds back the IP_SET_HASH_WITH_NET0 macro toip_set_hash_netportnet to address the issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath12k: Avoid NULL pointer access during management transmit cleanupCurrently 'ar' reference is not added in skb_cb.Though this is generally not used during transmit completioncallbacks, on interface removal the remaining idr cleanup callbackuses the ar pointer from skb_cb from management txmgmt_idr. Hence fill themduring transmit call for proper usage to avoid NULL pointer dereference.Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:dma-buf/dma-resv: Stop leaking on krealloc() failureCurrently dma_resv_get_fences() will leak the previouslyallocated array if the fence iteration got restarted andthe krealloc_array() fails.Free the old array by hand, and make sure we still clearthe returned *fences so the caller won't end up accessingfreed memory. Some (but not all) of the callers ofdma_resv_get_fences() seem to still trawl through thearray even when dma_resv_get_fences() failed. And let'szero out *num_fences as well for good measure.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:arm64/sme: Set new vector length before reallocatingAs part of fixing the allocation of the buffer for SVE state when changingSME vector length we introduced an immediate reallocation of the SVE state,this is also done when changing the SVE vector length for consistency.Unfortunately this reallocation is done prior to writing the new vectorlength to the task struct, meaning the allocation is done with the oldvector length and can lead to memory corruption due to an undersized bufferbeing used.Move the update of the vector length before the allocation to ensure thatthe new vector length is taken into account.For some reason this isn't triggering any problems when running tests onthe arm64 fixes branch (even after repeated tries) but is triggeringissues very often after merge into mainline.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath9k: don't allow to overwrite ENDPOINT0 attributesA bad USB device is able to construct a service connection responsemessage with target endpoint being ENDPOINT0 which is reserved forHTC_CTRL_RSVD_SVC and should not be modified to be used for any otherservices.Reject such service connection responses.Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix use-after-free of new block group that became unusedIf a task creates a new block group and that block group becomes unusedbefore we finish its creation, at btrfs_create_pending_block_groups(),then when btrfs_mark_bg_unused() is called against the block group, weassume that the block group is currently in the list of block groups toreclaim, and we move it out of the list of new block groups and into thelist of unused block groups. This has two consequences:1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items;2) We don't increment the reference count on the block group when we move it to the list of unused block groups, because we assumed the block group was on the list of block groups to reclaim, and in that case it already has the correct reference count. However the block group was on the list of new block groups, in which case no extra reference was taken because it's local to the current task. This later results in doing an extra reference count decrement when removing the block group from the unused list, eventually leading the reference count to 0.This second case was caught when running generic/297 from fstests, whichproduced the following assertion failure and stack trace: [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299 [589.559] ------------[ cut here ]------------ [589.559] kernel BUG at fs/btrfs/block-group.c:4299! [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.561] Code: 68 62 da c0 (...) [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246 [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000 [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50 [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00 [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100 [589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000 [589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0 [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [589.564] Call Trace: [589.564] [589.565] ? __die_body+0x1b/0x60 [589.565] ? die+0x39/0x60 [589.565] ? do_trap+0xeb/0x110 [589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? do_error_trap+0x6a/0x90 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? exc_invalid_op+0x4e/0x70 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? asm_exc_invalid_op+0x16/0x20 [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] close_ctree+0x35d/0x560 [btrfs] [589.568] ? fsnotify_sb_delete+0x13e/0x1d0 [589.568] ? dispose_list+0x3a/0x50 [589.568] ? evict_inodes+0x151/0x1a0 [589.568] generic_shutdown_super+0x73/0x1a0 [589.569] kill_anon_super+0x14/0x30 [589.569] btrfs_kill_super+0x12/0x20 [btrfs] [589.569] deactivate_locked---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6/addrconf: fix a potential refcount underflow for idevNow in addrconf_mod_rs_timer(), reference idev depends on whetherrs_timer is not pending. Then modify rs_timer timeout.There is a time gap in [1], during which if the pending rs_timerbecomes not pending. It will miss to hold idev, but the rs_timeris activated. Thus rs_timer callback function addrconf_rs_timer()will be executed and put idev later without holding idev. A refcountunderflow issue for idev can be caused by this. if (!timer_pending(&idev->rs_timer)) in6_dev_hold(idev); <--------------[1] mod_timer(&idev->rs_timer, jiffies + when);To fix the issue, hold idev if mod_timer() return 0.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vxlan: Fix nexthop hash sizeThe nexthop code expects a 31 bit hash, such as what is returned byfib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hashreturned by skb_get_hash() can lead to problems related to the fact that'int hash' is a negative number when the MSB is set.In the case of hash threshold nexthop groups, nexthop_select_path_hthr()will disproportionately select the first nexthop group entry. In the caseof resilient nexthop groups, nexthop_select_path_res() may do an out ofbounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535which leads to the following panic:BUG: unable to handle page fault for address: ffffc900025910c8PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0Oops: 0002 [#1] PREEMPT SMP KASAN NOPTICPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014Workqueue: ipv6_addrconf addrconf_dad_workRIP: 0010:nexthop_select_path+0x197/0xbf0Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85RSP: 0018:ffff88810c36f260 EFLAGS: 00010246RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0PKRU: 55555554Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_initThe line cards array is not freed in the error path ofmlxsw_m_linecards_init(), which can lead to a memory leak. Fix byfreeing the array in the error path, thereby making the error pathidentical to mlxsw_m_linecards_fini().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: dwc3: qcom: Fix potential memory leakFunction dwc3_qcom_probe() allocates memory for resource structurewhich is pointed by parent_res pointer. This memory is notfreed. This leads to memory leak. Use stack memory to preventmemory leak.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/bnxt_re: wraparound mbox producer indexDriver is not handling the wraparound of the mbox producer index correctly.Currently the wraparound happens once u32 max is reached.Bit 31 of the producer index register is special and should be setonly once for the first command. Because the producer index overflowsetting bit31 after a long time, FW goes to initialization sequenceand this causes FW hang.Fix is to wraparound the mbox producer index once it reaches u16 max.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:af_unix: Fix data-races around user->unix_inflight.user->unix_inflight is changed under spin_lock(unix_gc_lock),but too_many_unix_fds() reads it locklessly.Let's annotate the write/read accesses to user->unix_inflight.BUG: KCSAN: data-race in unix_attach_fds / unix_inflightwrite to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8value changed: 0x000000000000000c -> 0x000000000000000dReported by Kernel Concurrency Sanitizer on:CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: s390/diag: fix racy access of physical cpu number in diag 9c handlerWe do check for target CPU == -1, but this might change at the time weare going to use it. Hold the physical target CPU in a local variable toavoid out-of-bound accesses to the cpu arrays.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hwmon: (pmbus_core) Fix NULL pointer dereferencePass i2c_client to _pmbus_is_enabled to drop the assumptionthat a regulator device is passed in.This will fix the issue of a NULL pointer dereference when called from_pmbus_get_flags.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ublk: fail to recover device if queue setup is interruptedIn ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() isinterrupted by signal, queues aren't setup successfully yet, so wehave to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can betriggered.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: nSVM: Load L1's TSC multiplier based on L1 state, not L2 stateWhen emulating nested VM-Exit, load L1's TSC multiplier if L1's desiredratio doesn't match the current ratio, not if the ratio L1 is using forL2 diverges from the default. Functionally, the end result is the sameas KVM will run L2 with L1's multiplier if L2's multiplier is the default,i.e. checking that L1's multiplier is loaded is equivalent to checking ifL2 has a non-default multiplier.However, the assertion that TSC scaling is exposed to L1 is flawed, asuserspace can trigger the WARN at will by writing the MSR and thenupdating guest CPUID to hide the feature (modifying guest CPUID isallowed anytime before KVM_RUN). E.g. hacking KVM's state_testselftest to do vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0); vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);after restoring state in a new VM+vCPU yields an endless supply of: ------------[ cut here ]------------ WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105 nested_svm_vmexit+0x6af/0x720 [kvm_amd] Call Trace: nested_svm_exit_handled+0x102/0x1f0 [kvm_amd] svm_handle_exit+0xb9/0x180 [kvm_amd] kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm] kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm] ? trace_hardirqs_off+0x4d/0xa0 __se_sys_ioctl+0x7a/0xc0 __x64_sys_ioctl+0x21/0x30 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcdUnlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled checkinto the if-statement is wrong as KVM needs to ensure L1's multiplier isloaded in the above scenario. Alternatively, the WARN_ON() could simplybe deleted, but that would make KVM's behavior even more subtle, e.g. it'snot immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO whenchecking only tsc_ratio_msr.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()r5l_flush_stripe_to_raid() will check if the list 'flushing_ios' isempty, and then submit 'flush_bio', however, r5l_log_flush_endio()is clearing the list first and then clear the bio, which will causenull-ptr-deref:T1: submit flush ioraid5d handle_active_stripes r5l_flush_stripe_to_raid // list is empty // add 'io_end_ios' to the list bio_init submit_bio // io1T2: io1 is doner5l_log_flush_endio list_splice_tail_init // clear the list T3: submit new flush io ... r5l_flush_stripe_to_raid // list is empty // add 'io_end_ios' to the list bio_init bio_uninit // clear bio->bi_blkg submit_bio // null-ptr-derefFix this problem by clearing bio before clearing the list inr5l_log_flush_endio().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nubus: Partially revert proc_create_single_data() conversionThe conversion to proc_create_single_data() introduced a regressionwhereby reading a file in /proc/bus/nubus results in a seg fault: # grep -r . /proc/bus/nubus/e/ Data read fault at 0x00000020 in Super Data (pc=0x1074c2) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<001074c2>] PDE_DATA+0xc/0x16 SR: 2010 SP: 38284958 a2: 01152370 d0: 00000001 d1: 01013000 d2: 01002790 d3: 00000000 d4: 00000001 d5: 0008ce2e a0: 00000000 a1: 00222a40 Process grep (pid: 45, task=142f8727) Frame format=B ssw=074d isc=2008 isb=4e5e daddr=00000020 dobuf=01199e70 baddr=001074c8 dibuf=ffffffff ver=f Stack from 01199e48: 01199e70 00222a58 01002790 00000000 011a3000 01199eb0 015000c0 00000000 00000000 01199ec0 01199ec0 000d551a 011a3000 00000001 00000000 00018000 d003f000 00000003 00000001 0002800d 01052840 01199fa8 c01f8000 00000000 00000029 0b532b80 00000000 00000000 00000029 0b532b80 01199ee4 00103640 011198c0 d003f000 00018000 01199fa8 00000000 011198c0 00000000 01199f4c 000b3344 011198c0 d003f000 00018000 01199fa8 00000000 00018000 011198c0 Call Trace: [<00222a58>] nubus_proc_rsrc_show+0x18/0xa0 [<000d551a>] seq_read+0xc4/0x510 [<00018000>] fp_fcos+0x2/0x82 [<0002800d>] __sys_setreuid+0x115/0x1c6 [<00103640>] proc_reg_read+0x5c/0xb0 [<00018000>] fp_fcos+0x2/0x82 [<000b3344>] __vfs_read+0x2c/0x13c [<00018000>] fp_fcos+0x2/0x82 [<00018000>] fp_fcos+0x2/0x82 [<000b8aa2>] sys_statx+0x60/0x7e [<000b34b6>] vfs_read+0x62/0x12a [<00018000>] fp_fcos+0x2/0x82 [<00018000>] fp_fcos+0x2/0x82 [<000b39c2>] ksys_read+0x48/0xbe [<00018000>] fp_fcos+0x2/0x82 [<000b3a4e>] sys_read+0x16/0x1a [<00018000>] fp_fcos+0x2/0x82 [<00002b84>] syscall+0x8/0xc [<00018000>] fp_fcos+0x2/0x82 [<0000c016>] not_ext+0xa/0x18 Code: 4e5e 4e75 4e56 0000 206e 0008 2068 ffe8 <2068> 0020 2008 4e5e 4e75 4e56 0000 2f0b 206e 0008 2068 0004 2668 0020 206b ffe8 Disabling lock debugging due to kernel taint Segmentation faultThe proc_create_single_data() conversion does not work becausesingle_open(file, nubus_proc_rsrc_show, PDE_DATA(inode)) is notequivalent to the original code.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix memleak due to fentry attach failureIf it fails to attach fentry, the allocated bpf trampoline image will beleft in the system. That can be verified by checking /proc/kallsyms.This meamleak can be verified by a simple bpf program as follows: SEC("fentry/trap_init") int fentry_run() { return 0; }It will fail to attach trap_init because this function is freed afterkernel init, and then we can find the trampoline image is left in thesystem by checking /proc/kallsyms. $ tail /proc/kallsyms ffffffffc0613000 t bpf_trampoline_6442453466_1 [bpf] ffffffffc06c3000 t bpf_trampoline_6442453466_1 [bpf] $ bpftool btf dump file /sys/kernel/btf/vmlinux | grep "FUNC 'trap_init'" [2522] FUNC 'trap_init' type_id=119 linkage=static $ echo $((6442453466 & 0x7fffffff)) 2522Note that there are two left bpf trampoline images, that is because thelibbpf will fallback to raw tracepoint if -EINVAL is returned.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mwifiex: Fix OOB and integer underflow when rx packetsMake sure mwifiex_process_mgmt_packet,mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packetnot out-of-bounds access the skb->data buffer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix warning in cifs_smb3_do_mount()This fixes the following warning reported by kernel test robot fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible memory leak of 'cifs_sb'
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: Fix detection of atomic contextCurrent check for atomic context is not sufficient asz_erofs_decompressqueue_endio can be called under rcu lockfrom blk_mq_flush_plug_list(). See the stacktrace [1]In such case we should hand off the decompression work for asyncprocessing rather than trying to do sync decompression in currentcontext. Patch fixes the detection by checking forrcu_read_lock_any_held() and while at it use more appropriate!in_task() check than in_atomic().Background: Historically erofs would always schedule a kworker fordecompression which would incur the scheduling cost regardless ofthe context. But z_erofs_decompressqueue_endio() may not alwaysbe in atomic context and we could actually benefit from doing thedecompression in z_erofs_decompressqueue_endio() if we are inthread context, for example when running with dm-verity.This optimization was later added in patch [2] which has shownimprovement in performance benchmarks.==============================================[1] Problem stacktrace[name:core&]BUG: sleeping function called from invalid context at kernel/locking/mutex.c:291[name:core&]in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1615, name: CpuMonitorServi[name:core&]preempt_count: 0, expected: 0[name:core&]RCU nest depth: 1, expected: 0CPU: 7 PID: 1615 Comm: CpuMonitorServi Tainted: G S W OE 6.1.25-android14-5-maybe-dirty-mainline #1Hardware name: MT6897 (DT)Call trace: dump_backtrace+0x108/0x15c show_stack+0x20/0x30 dump_stack_lvl+0x6c/0x8c dump_stack+0x20/0x48 __might_resched+0x1fc/0x308 __might_sleep+0x50/0x88 mutex_lock+0x2c/0x110 z_erofs_decompress_queue+0x11c/0xc10 z_erofs_decompress_kickoff+0x110/0x1a4 z_erofs_decompressqueue_endio+0x154/0x180 bio_endio+0x1b0/0x1d8 __dm_io_complete+0x22c/0x280 clone_endio+0xe4/0x280 bio_endio+0x1b0/0x1d8 blk_update_request+0x138/0x3a4 blk_mq_plug_issue_direct+0xd4/0x19c blk_mq_flush_plug_list+0x2b0/0x354 __blk_flush_plug+0x110/0x160 blk_finish_plug+0x30/0x4c read_pages+0x2fc/0x370 page_cache_ra_unbounded+0xa4/0x23c page_cache_ra_order+0x290/0x320 do_sync_mmap_readahead+0x108/0x2c0 filemap_fault+0x19c/0x52c __do_fault+0xc4/0x114 handle_mm_fault+0x5b4/0x1168 do_page_fault+0x338/0x4b4 do_translation_fault+0x40/0x60 do_mem_abort+0x60/0xc8 el0_da+0x4c/0xe0 el0t_64_sync_handler+0xd4/0xfc el0t_64_sync+0x1a0/0x1a4[2] Link: https://lore.kernel.org/all/20210317035448.13921-1-huangjianan@oppo.com/
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/tests: helpers: Avoid a driver uafwhen using __drm_kunit_helper_alloc_drm_device() the driver may bedereferenced by device-managed resources up until the device isfreed, which is typically later than the kunit-managed resource codefrees it. Fix this by simply make the driver device-managed as well.In short, the sequence leading to the UAF is as follows:INIT:Code allocates a struct device as a kunit-managed resource.Code allocates a drm driver as a kunit-managed resource.Code allocates a drm device as a device-managed resource.EXIT:Kunit resource cleanup frees the drm driverKunit resource cleanup puts the struct device, which starts a device-managed resource cleanupdevice-managed cleanup calls drm_dev_put()drm_dev_put() dereferences the (now freed) drm driver -> Boom.Related KASAN message:[55272.551542] ==================================================================[55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm][55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353[55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155[55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021[55272.551626] Call Trace:[55272.551629] [55272.551633] dump_stack_lvl+0x57/0x90[55272.551639] print_report+0xcf/0x630[55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70[55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm][55272.551694] kasan_report+0xd7/0x110[55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm][55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm][55272.551783] devres_release_all+0x15d/0x1f0[55272.551790] ? __pfx_devres_release_all+0x10/0x10[55272.551797] device_unbind_cleanup+0x16/0x1a0[55272.551802] device_release_driver_internal+0x3e5/0x540[55272.551808] ? kobject_put+0x5d/0x4b0[55272.551814] bus_remove_device+0x1f1/0x3f0[55272.551819] device_del+0x342/0x910[55272.551826] ? __pfx_device_del+0x10/0x10[55272.551830] ? lock_release+0x339/0x5e0[55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit][55272.551845] ? __pfx_lock_release+0x10/0x10[55272.551851] platform_device_del.part.0+0x1f/0x1e0[55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60[55272.551863] kunit_remove_resource+0x195/0x290 [kunit][55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60[55272.551877] kunit_cleanup+0x78/0x120 [kunit][55272.551885] ? __kthread_parkme+0xc1/0x1f0[55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit][55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit][55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit][55272.551919] kthread+0x2e7/0x3c0[55272.551924] ? __pfx_kthread+0x10/0x10[55272.551929] ret_from_fork+0x2d/0x70[55272.551935] ? __pfx_kthread+0x10/0x10[55272.551940] ret_from_fork_asm+0x1b/0x30[55272.551948] [55272.551953] Allocated by task 10351:[55272.551956] kasan_save_stack+0x1c/0x40[55272.551962] kasan_set_track+0x21/0x30[55272.551966] __kasan_kmalloc+0x8b/0x90[55272.551970] __kmalloc+0x5e/0x160[55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit][55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test][55272.551991] kunit_try_run_case+0xdd/0x250 [kunit][55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit][55272.552008] kthread+0x2e7/0x3c0[55272.552012] ret_from_fork+0x2d/0x70[55272.552017] ret_from_fork_asm+0x1b/0x30[55272.552024] Freed by task 10353:[55272.552027] kasan_save_stack+0x1c/0x40[55272.552032] kasan_set_track+0x21/0x30[55272.552036] kasan_save_free_info+0x27/0x40[55272.552041] __kasan_slab_free+0x106/0x180[55272.552046] slab_free_freelist_hook+0xb3/0x160[55272.552051] __kmem_cache_free+0xb2/0x290[55272.552056] kunit_remove_resource+0x195/0x290 [kunit][55272.552064] kunit_cleanup+0x7---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM.In the for loop, 'i' is used as the index for array 'priv->ports[]'with a check (i > INNO_PHY_PORT_NUM) which indicates thatINNO_PHY_PORT_NUM is allowed value for 'i' in the same loop.This > comparison needs to be changed to >=, otherwise it potentially leadsto an out of bounds write on the next iteration through the loop
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: storvsc: Fix handling of virtual Fibre Channel timeoutsHyper-V provides the ability to connect Fibre Channel LUNs to the hostsystem and present them in a guest VM as a SCSI device. I/O to the vFCdevice is handled by the storvsc driver. The storvsc driver includes apartial integration with the FC transport implemented in the genericportion of the Linux SCSI subsystem so that FC attributes can be displayedin /sys. However, the partial integration means that some aspects of vFCdon't work properly. Unfortunately, a full and correct integration isn'tpractical because of limitations in what Hyper-V provides to the guest.In particular, in the context of Hyper-V storvsc, the FC transport timeoutfunction fc_eh_timed_out() causes a kernel panic because it can't find therport and dereferences a NULL pointer. The original patch that added thecall from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in thisregard.In many cases a timeout is due to a transient condition, so the situationcan be improved by just continuing to wait like with other I/O requestsissued by storvsc, and avoiding the guaranteed panic. For a permanentfailure, continuing to wait may result in a hung thread instead of a panic,which again may be better.So fix the panic by removing the storvsc call to fc_eh_timed_out(). Thisallows storvsc to keep waiting for a response. The change has been testedby users who experienced a panic in fc_eh_timed_out() due to transienttimeouts, and it solves their problem.In the future we may want to deprecate the vFC functionality in storvscsince it can't be fully fixed. But it has current users for whom it isworking well enough, so it should probably stay for a while longer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expandWhile trying to get the subpage blocksize tests running, I hit thefollowing panic on generic/476 assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_clear_checked+0x38/0xc0 btrfs_page_clear_checked+0x48/0x98 btrfs_truncate_block+0x5d0/0x6a8 btrfs_cont_expand+0x5c/0x528 btrfs_write_check.isra.0+0xf8/0x150 btrfs_buffered_write+0xb4/0x760 btrfs_do_write_iter+0x2f8/0x4b0 btrfs_file_write_iter+0x1c/0x30 do_iter_readv_writev+0xc8/0x158 do_iter_write+0x9c/0x210 vfs_iter_write+0x24/0x40 iter_file_splice_write+0x224/0x390 direct_splice_actor+0x38/0x68 splice_direct_to_actor+0x12c/0x260 do_splice_direct+0x90/0xe8 generic_copy_file_range+0x50/0x90 vfs_copy_file_range+0x29c/0x470 __arm64_sys_copy_file_range+0xcc/0x498 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x168 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x114/0x120 el0t_64_sync+0x194/0x198This happens because during btrfs_cont_expand we'll get a page, set itas mapped, and if it's not Uptodate we'll read it. However between theread and re-locking the page we could have called release_folio() on thepage, but left the page in the file mapping. release_folio() can clearthe page private, and thus further down we blow up when we go to modifythe subpage bits.Fix this by putting the set_page_extent_mapped() after the read. Thisis safe because read_folio() will call set_page_extent_mapped() beforeit does the read, and then if we clear page private but leave it on themapping we're completely safe re-setting set_page_extent_mapped(). Withthis patch I can now run generic/476 without panicing.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: install stub fence into potential unused fence pointersWhen using cpu to update page tables, vm update fences are unused.Install stub fence into these fence pointers instead of NULLto avoid NULL dereference when calling dma_fence_wait() on them.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler()rxq can be NULL only when trans_pcie->rxq is NULL and entry->entryis zero. For the case when entry->entry is not equal to 0, rxqwon't be NULL even if trans_pcie->rxq is NULL. Modify checker tocheck for trans_pcie->rxq.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Fix possible underflow for displays with large vblank[Why]Underflow observed when using a display with a large vblank regionand low refresh rate[How]Simplify calculation of vblank_nomIncrease value for VBlankNomDefaultUS to 800us
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: hda: fix a possible null-pointer dereference due to data race in snd_hdac_regmap_sync()The variable codec->regmap is often protected by the lockcodec->regmap_lock when is accessed. However, it is accessed withoutholding the lock when is accessed in snd_hdac_regmap_sync(): if (codec->regmap)In my opinion, this may be a harmful race, because if codec->regmap isset to NULL right after the condition is checked, a null-pointerdereference can occur in the called function regcache_sync(): map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.cTo fix this possible null-pointer dereference caused by data race, themutex_lock coverage is extended to protect the if statement as well as thefunction call to regcache_sync().[ Note: the lack of the regmap_lock itself is harmless for the current codec driver implementations, as snd_hdac_regmap_sync() is only for PM runtime resume that is prohibited during the codec probe. But the change makes the whole code more consistent, so it's merged as is -- tiwai ]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/mlx5: Return the firmware result upon destroying QP/RQPreviously when destroying a QP/RQ, the result of the firmwaredestruction function was ignored and upper layers weren't informedabout the failure.Which in turn could lead to various problems since when upper layerisn't aware of the failure it continues its operation thinking that therelated QP/RQ was successfully destroyed while it actually wasn't,which could lead to the below kernel WARN.Currently, we return the correct firmware destruction status to upperlayers which in case of the RQ would be mlx5_ib_destroy_wq() whichwas already capable of handling RQ destruction failure or in case ofa QP to destroy_qp_common(), which now would actually warn upon qpdestruction failure.WARNING: CPU: 3 PID: 995 at drivers/infiniband/core/rdma_core.c:940 uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs]Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuseCPU: 3 PID: 995 Comm: python3 Not tainted 5.16.0-rc5+ #1Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014RIP: 0010:uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs]Code: 41 5c 41 5d 41 5e e9 44 34 f0 e0 48 89 df e8 4c 77 ff ff 49 8b 86 10 01 00 00 48 85 c0 74 a1 4c 89 e7 ff d0 eb 9a 0f 0b eb c1 <0f> 0b be 04 00 00 00 48 89 df e8 b6 f6 ff ff e9 75 ff ff ff 90 0fRSP: 0018:ffff8881533e3e78 EFLAGS: 00010287RAX: ffff88811b2cf3e0 RBX: ffff888106209700 RCX: 0000000000000000RDX: ffff888106209780 RSI: ffff8881533e3d30 RDI: ffff888109b101a0RBP: 0000000000000001 R08: ffff888127cb381c R09: 0de9890000000009R10: ffff888127cb3800 R11: 0000000000000000 R12: ffff888106209780R13: ffff888106209750 R14: ffff888100f20660 R15: 0000000000000000FS: 00007f8be353b740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f8bd5b117c0 CR3: 000000012cd8a004 CR4: 0000000000370ea0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: ib_uverbs_close+0x1a/0x90 [ib_uverbs] __fput+0x82/0x230 task_work_run+0x59/0x90 exit_to_user_mode_prepare+0x138/0x140 syscall_exit_to_user_mode+0x1d/0x50 ? __x64_sys_close+0xe/0x40 do_syscall_64+0x4a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xaeRIP: 0033:0x7f8be3ae0abbCode: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 83 43 f9 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 c1 43 f9 ff 8b 44RSP: 002b:00007ffdb51909c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003RAX: 0000000000000000 RBX: 0000557bb7f7c020 RCX: 00007f8be3ae0abbRDX: 0000557bb7c74010 RSI: 0000557bb7f14ca0 RDI: 0000000000000005RBP: 0000557bb7fbd598 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000293 R12: 0000557bb7fbd5b8R13: 0000557bb7fbd5a8 R14: 0000000000001000 R15: 0000557bb7f7c020
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: cdns3: Put the cdns set active part outside the spin lockThe device may be scheduled during the resume process,so this cannot appear in atomic operations. Sincepm_runtime_set_active will resume suppliers, put setactive outside the spin lock, which is only used toprotect the struct cdns data structure, otherwise thekernel will report the following warning: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1 Hardware name: Freescale i.MX8QM MEK (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x64/0x80 dump_stack+0x1c/0x38 __might_resched+0x1fc/0x240 __might_sleep+0x68/0xc0 __pm_runtime_resume+0x9c/0xe0 rpm_get_suppliers+0x68/0x1b0 __pm_runtime_set_status+0x298/0x560 cdns_resume+0xb0/0x1c0 cdns3_controller_resume.isra.0+0x1e0/0x250 cdns3_plat_resume+0x28/0x40
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/client: Fix memory leak in drm_client_modeset_probeWhen a new mode is set to modeset->mode, the previous mode should be freed.This fixes the following kmemleak report:drm_mode_duplicate+0x45/0x220 [drm]drm_client_modeset_probe+0x944/0xf50 [drm]__drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper]drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper]drm_client_register+0x169/0x240 [drm]ast_pci_probe+0x142/0x190 [ast]local_pci_probe+0xdc/0x180work_for_cpu_fn+0x4e/0xa0process_one_work+0x8b7/0x1540worker_thread+0x70a/0xed0kthread+0x29f/0x340ret_from_fork+0x1f/0x30
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscaleRunning the 'kfree_rcu_test' test case [1] results in a splat [2].The root cause is the kfree_scale_thread thread(s) continue runningafter unloading the rcuscale module. This commit fixes that isue byinvoking kfree_scale_cleanup() from rcu_scale_cleanup() when removingthe rcuscale module.[1] modprobe rcuscale kfree_rcu_test=1 // After some time rmmod rcuscale rmmod torture[2] BUG: unable to handle page fault for address: ffffffffc0601a87 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 11de4f067 P4D 11de4f067 PUD 11de51067 PMD 112f4d067 PTE 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1798 Comm: kfree_scale_thr Not tainted 6.3.0-rc1-rcu+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:0xffffffffc0601a87 Code: Unable to access opcode bytes at 0xffffffffc0601a5d. RSP: 0018:ffffb25bc2e57e18 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffffffffc061f0b6 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff962fd0de RDI: ffffffff962fd0de RBP: ffffb25bc2e57ea8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000000a R15: 00000000001c1dbe FS: 0000000000000000(0000) GS:ffff921fa2200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc0601a5d CR3: 000000011de4c006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? kvfree_call_rcu+0xf0/0x3a0 ? kthread+0xf3/0x120 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x1f/0x30 Modules linked in: rfkill sunrpc ... [last unloaded: torture] CR2: ffffffffc0601a87 ---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: microchip: vcap api: Fix possible memory leak for vcap_dup_rule()Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leakoccurs. If kzalloc() for duprule succeeds, but the followingkmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfreethem in the error path.unreferenced object 0xffff122744c50600 (size 192): comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff ...........D'... backtrace: [<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8 [<0000000001bedc67>] kmalloc_trace+0x38/0x88 [<00000000b0612f98>] vcap_dup_rule+0x50/0x460 [<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038 [<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494 [<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698 [<00000000c8766299>] kunit_try_run_case+0xe0/0x20c [<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94 [<00000000f6864acf>] kthread+0x2e8/0x374 [<0000000022e639b3>] ret_from_fork+0x10/0x20
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_set_rbtree: fix overlap expiration walkThe lazy gc on insert that should remove timed-out entries fails to releasethe other half of the interval, if any.Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0in nftables.git and kmemleak enabled kernel.Second bug is the use of rbe_prev vs. prev pointer.If rbe_prev() returns NULL after at least one iteration, rbe_prev pointsto element that is not an end interval, hence it should not be removed.Lastly, check the genmask of the end interval if this is active in thecurrent generation.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: L2CAP: Fix use-after-freeFix potential use-after-free in l2cap_le_command_rej.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/radeon: Fix integer overflow in radeon_cs_parser_initThe type of size is unsigned, if size is 0x40000000, there will be aninteger overflow, size will be zero after size *= sizeof(uint32_t),will cause uninitialized memory to be referenced later
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: fix net_dev_start_xmit trace event vs skb_transport_offset()After blamed commit, we must be more careful about usingskb_transport_offset(), as reminded us by syzbot:WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline]WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14Modules linked in:CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packetRIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline]RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline]RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ffRSP: 0018:ffffc900002bf700 EFLAGS: 00010293RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffffRBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5eR10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0Call Trace:[] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline][] xmit_one net/core/dev.c:3643 [inline][] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660[] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324[] dev_queue_xmit include/linux/netdevice.h:3030 [inline][] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108[] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127[] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline][] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline][] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701[] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289[] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid10: fix wrong setting of max_corr_read_errorsThere is no input check when echo md/max_read_errors and overflow mightoccur. Add check of input number.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvmCurrently there is no synchronisation between finalize_pkvm() andkvm_arm_init() initcalls. The finalize_pkvm() proceeds happily even ifkvm_arm_init() fails resulting in the following warning on all the CPUsand eventually a HYP panic: | kvm [1]: IPA Size Limit: 48 bits | kvm [1]: Failed to init hyp memory protection | kvm [1]: error initializing Hyp mode: -22 | | | | WARNING: CPU: 0 PID: 0 at arch/arm64/kvm/pkvm.c:226 _kvm_host_prot_finalize+0x30/0x50 | Modules linked in: | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | pstate: 634020c5 (nZCv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) | pc : _kvm_host_prot_finalize+0x30/0x50 | lr : __flush_smp_call_function_queue+0xd8/0x230 | | Call trace: | _kvm_host_prot_finalize+0x3c/0x50 | on_each_cpu_cond_mask+0x3c/0x6c | pkvm_drop_host_privileges+0x4c/0x78 | finalize_pkvm+0x3c/0x5c | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | Failed to finalize Hyp protection: -22 | dtb=fvp-base-revc.dtb | kvm [95]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:540! | kvm [95]: nVHE call trace: | kvm [95]: [] __kvm_nvhe_hyp_panic+0xac/0xf8 | kvm [95]: [] __kvm_nvhe_handle_host_mem_abort+0x1a0/0x2ac | kvm [95]: [] __kvm_nvhe_handle_trap+0x4c/0x160 | kvm [95]: [] __kvm_nvhe___skip_pauth_save+0x4/0x4 | kvm [95]: ---[ end nVHE call trace ]--- | kvm [95]: Hyp Offset: 0xfffe8db00ffa0000 | Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 | CPU: 3 PID: 95 Comm: kworker/u16:2 Tainted: G W 6.4.0 #237 | Hardware name: FVP Base RevC (DT) | Workqueue: rpciod rpc_async_schedule | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x138/0x33c | nvhe_hyp_panic_handler+0x100/0x184 | new_slab+0x23c/0x54c | ___slab_alloc+0x3e4/0x770 | kmem_cache_alloc_node+0x1f0/0x278 | __alloc_skb+0xdc/0x294 | tcp_stream_alloc_skb+0x2c/0xf0 | tcp_sendmsg_locked+0x3d0/0xda4 | tcp_sendmsg+0x38/0x5c | inet_sendmsg+0x44/0x60 | sock_sendmsg+0x1c/0x34 | xprt_sock_sendmsg+0xdc/0x274 | xs_tcp_send_request+0x1ac/0x28c | xprt_transmit+0xcc/0x300 | call_transmit+0x78/0x90 | __rpc_execute+0x114/0x3d8 | rpc_async_schedule+0x28/0x48 | process_one_work+0x1d8/0x314 | worker_thread+0x248/0x474 | kthread+0xfc/0x184 | ret_from_fork+0x10/0x20 | SMP: stopping secondary CPUs | Kernel Offset: 0x57c5cb460000 from 0xffff800080000000 | PHYS_OFFSET: 0x80000000 | CPU features: 0x00000000,1035b7a3,ccfe773f | Memory Limit: none | ---[ end Kernel panic - not syncing: HYP panic: | PS:a34023c9 PC:0000f250710b973c ESR:00000000f2000800 | FAR:ffff000800cb00d0 HPFAR:000000000880cb00 PAR:0000000000000000 | VCPU:0000000000000000 ]---Fix it by checking for the successfull initialisation of kvm_arm_init()in finalize_pkvm() before proceeding any futher.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext2/dax: Fix ext2_setsize when len is page alignedPAGE_ALIGN(x) macro gives the next highest value which is multiple ofpagesize. But if x is already page aligned then it simply returns x.So, if x passed is 0 in dax_zero_range() function, that means thelength gets passed as 0 to ->iomap_begin().In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_onhere in ext2_get_blocks(). BUG_ON(maxblocks == 0);Instead we should be calling dax_truncate_page() here which takescare of it. i.e. it only calls dax_zero_range if the offset is notpage/block aligned.This can be easily triggered with following on fsdax mounted pmemdevice.dd if=/dev/zero of=file count=1 bs=512truncate -s 0 file[79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk[79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff)[93.793207] ------------[ cut here ]------------[93.795102] kernel BUG at fs/ext2/inode.c:637![93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI[93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139[93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610<...>[93.835298] Call Trace:[93.836253] [93.837103] ? lock_acquire+0xf8/0x110[93.838479] ? d_lookup+0x69/0xd0[93.839779] ext2_iomap_begin+0xa7/0x1c0[93.841154] iomap_iter+0xc7/0x150[93.842425] dax_zero_range+0x6e/0xa0[93.843813] ext2_setsize+0x176/0x1b0[93.845164] ext2_setattr+0x151/0x200[93.846467] notify_change+0x341/0x4e0[93.847805] ? lock_acquire+0xf8/0x110[93.849143] ? do_truncate+0x74/0xe0[93.850452] ? do_truncate+0x84/0xe0[93.851739] do_truncate+0x84/0xe0[93.852974] do_sys_ftruncate+0x2b4/0x2f0[93.854404] do_syscall_64+0x3f/0x90[93.855789] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/mediatek: dp: Change logging to dev for mtk_dp_aux_transfer()Change logging from drm_{err,info}() to dev_{err,info}() in functionsmtk_dp_aux_transfer() and mtk_dp_aux_do_transfer(): this will beessential to avoid getting NULL pointer kernel panics if any kindof error happens during AUX transfers happening before the bridgeis attached.This may potentially start happening in a later commit implementingaux-bus support, as AUX transfers will be triggered from the paneldriver (for EDID) before the mtk-dp bridge gets attached, and it'sdone in preparation for the same.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: Enhance sanity check while generating attr_listni_create_attr_list uses WARN_ON to catch error cases while generatingattribute list, which only prints out stack trace and may not be enough.This repalces them with more proper error handling flow.[ 59.666332] BUG: kernel NULL pointer dereference, address: 000000000000000e[ 59.673268] #PF: supervisor read access in kernel mode[ 59.678354] #PF: error_code(0x0000) - not-present page[ 59.682831] PGD 8000000005ff1067 P4D 8000000005ff1067 PUD 7dee067 PMD 0[ 59.688556] Oops: 0000 [#1] PREEMPT SMP KASAN PTI[ 59.692642] CPU: 0 PID: 198 Comm: poc Tainted: G B W 6.2.0-rc1+ #4[ 59.698868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014[ 59.708795] RIP: 0010:ni_create_attr_list+0x505/0x860[ 59.713657] Code: 7e 10 e8 5e d0 d0 ff 45 0f b7 76 10 48 8d 7b 16 e8 00 d1 d0 ff 66 44 89 73 16 4d 8d 75 0e 4c 89 f7 e8 3f d0 d0 ff 4c 8d8[ 59.731559] RSP: 0018:ffff88800a56f1e0 EFLAGS: 00010282[ 59.735691] RAX: 0000000000000001 RBX: ffff88800b7b5088 RCX: ffffffffb83079fe[ 59.741792] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffbb7f9fc0[ 59.748423] RBP: ffff88800a56f3a8 R08: ffff88800b7b50a0 R09: fffffbfff76ff3f9[ 59.754654] R10: ffffffffbb7f9fc7 R11: fffffbfff76ff3f8 R12: ffff88800b756180[ 59.761552] R13: 0000000000000000 R14: 000000000000000e R15: 0000000000000050[ 59.768323] FS: 00007feaa8c96440(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000[ 59.776027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 59.781395] CR2: 00007f3a2e0b1000 CR3: 000000000a5bc000 CR4: 00000000000006f0[ 59.787607] Call Trace:[ 59.790271] [ 59.792488] ? __pfx_ni_create_attr_list+0x10/0x10[ 59.797235] ? kernel_text_address+0xd3/0xe0[ 59.800856] ? unwind_get_return_address+0x3e/0x60[ 59.805101] ? __kasan_check_write+0x18/0x20[ 59.809296] ? preempt_count_sub+0x1c/0xd0[ 59.813421] ni_ins_attr_ext+0x52c/0x5c0[ 59.817034] ? __pfx_ni_ins_attr_ext+0x10/0x10[ 59.821926] ? __vfs_setxattr+0x121/0x170[ 59.825718] ? __vfs_setxattr_noperm+0x97/0x300[ 59.829562] ? __vfs_setxattr_locked+0x145/0x170[ 59.833987] ? vfs_setxattr+0x137/0x2a0[ 59.836732] ? do_setxattr+0xce/0x150[ 59.839807] ? setxattr+0x126/0x140[ 59.842353] ? path_setxattr+0x164/0x180[ 59.845275] ? __x64_sys_setxattr+0x71/0x90[ 59.848838] ? do_syscall_64+0x3f/0x90[ 59.851898] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc[ 59.857046] ? stack_depot_save+0x17/0x20[ 59.860299] ni_insert_attr+0x1ba/0x420[ 59.863104] ? __pfx_ni_insert_attr+0x10/0x10[ 59.867069] ? preempt_count_sub+0x1c/0xd0[ 59.869897] ? _raw_spin_unlock_irqrestore+0x2b/0x50[ 59.874088] ? __create_object+0x3ae/0x5d0[ 59.877865] ni_insert_resident+0xc4/0x1c0[ 59.881430] ? __pfx_ni_insert_resident+0x10/0x10[ 59.886355] ? kasan_save_alloc_info+0x1f/0x30[ 59.891117] ? __kasan_kmalloc+0x8b/0xa0[ 59.894383] ntfs_set_ea+0x90d/0xbf0[ 59.897703] ? __pfx_ntfs_set_ea+0x10/0x10[ 59.901011] ? kernel_text_address+0xd3/0xe0[ 59.905308] ? __kernel_text_address+0x16/0x50[ 59.909811] ? unwind_get_return_address+0x3e/0x60[ 59.914898] ? __pfx_stack_trace_consume_entry+0x10/0x10[ 59.920250] ? arch_stack_walk+0xa2/0x100[ 59.924560] ? filter_irq_stacks+0x27/0x80[ 59.928722] ntfs_setxattr+0x405/0x440[ 59.932512] ? __pfx_ntfs_setxattr+0x10/0x10[ 59.936634] ? kvmalloc_node+0x2d/0x120[ 59.940378] ? kasan_save_stack+0x41/0x60[ 59.943870] ? kasan_save_stack+0x2a/0x60[ 59.947719] ? kasan_set_track+0x29/0x40[ 59.951417] ? kasan_save_alloc_info+0x1f/0x30[ 59.955733] ? __kasan_kmalloc+0x8b/0xa0[ 59.959598] ? __kmalloc_node+0x68/0x150[ 59.963163] ? kvmalloc_node+0x2d/0x120[ 59.966490] ? vmemdup_user+0x2b/0xa0---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pstore/ram: Check start of empty przs during initAfter commit 30696378f68a ("pstore/ram: Do not treat empty buffers asvalid"), initialization would assume a prz was valid after seeing thatthe buffer_size is zero (regardless of the buffer start position). Thisunchecked start value means it could be outside the bounds of the buffer,leading to future access panics when written to: sysdump_panic_event+0x3b4/0x5b8 atomic_notifier_call_chain+0x54/0x90 panic+0x1c8/0x42c die+0x29c/0x2a8 die_kernel_fault+0x68/0x78 __do_kernel_fault+0x1c4/0x1e0 do_bad_area+0x40/0x100 do_translation_fault+0x68/0x80 do_mem_abort+0x68/0xf8 el1_da+0x1c/0xc0 __raw_writeb+0x38/0x174 __memcpy_toio+0x40/0xac persistent_ram_update+0x44/0x12c persistent_ram_write+0x1a8/0x1b8 ramoops_pstore_write+0x198/0x1e8 pstore_console_write+0x94/0xe0 ...To avoid this, also check if the prz start is 0 during the initializationphase. If not, the next prz sanity check case will discover it (start >size) and zap the buffer back to a sane state.[kees: update commit log with backtrace and clarifications]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic oneEric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer.BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371[..]Fix this by increasing the stack buffer to also include room forthe extra sequence numbers and all the known dccp packet type headers,then pull again after the initial validation of the basic header.While at it, mark packets invalid that lack 48bit sequence bit butwhere RFC says the type MUST use them.Compile tested only.v2: first skb_header_pointer() now needs to adjust the size to only pull the generic header. (Eric)Heads-up: I intend to remove dccp conntrack support later this year.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: ipu-bridge: Fix null pointer deref on SSDB/PLD parsing warningsWhen ipu_bridge_parse_rotation() and ipu_bridge_parse_orientation() runsensor->adev is not set yet.So if either of the dev_warn() calls about unknown values are hit thiswill lead to a NULL pointer deref.Set sensor->adev earlier, with a borrowed ref to avoid making unrollingon errors harder, to fix this.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix BUG_ON condition in btrfs_cancel_balancePausing and canceling balance can race to interrupt balance lead to BUG_ONpanic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balancedoes not take this race scenario into account.However, the race condition has no other side effects. We can fix that.Reproducing it with panic trace like this: kernel BUG at fs/btrfs/volumes.c:4618! RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0 Call Trace: ? do_nanosleep+0x60/0x120 ? hrtimer_nanosleep+0xb7/0x1a0 ? sched_core_clone_cookie+0x70/0x70 btrfs_ioctl_balance_ctl+0x55/0x70 btrfs_ioctl+0xa46/0xd20 __x64_sys_ioctl+0x7d/0xa0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Race scenario as follows: > mutex_unlock(&fs_info->balance_mutex); > -------------------- > .......issue pause and cancel req in another thread > -------------------- > ret = __btrfs_balance(fs_info); > > mutex_lock(&fs_info->balance_mutex); > if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) { > btrfs_info(fs_info, "balance: paused"); > btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED); > }
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: marvell: prestera: fix handling IPv4 routes with nhidFix handling IPv4 routes referencing a nexthop via its id by replacingcalls to fib_info_nh() with fib_info_nhc().Trying to add an IPv4 route referencing a nextop via nhid: $ ip link set up swp5 $ ip a a 10.0.0.1/24 dev swp5 $ ip nexthop add dev swp5 id 20 via 10.0.0.2 $ ip route add 10.0.1.0/24 nhid 20triggers warnings when trying to handle the route:[ 528.805763] ------------[ cut here ]------------[ 528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera][ 528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci][ 528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G O 6.4.5 #1[ 528.845178] Hardware name: delta,tn48m-dn (DT)[ 528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera][ 528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera][ 528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera][ 528.876007] sp : ffff80000b20bc90[ 528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48[ 528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800[ 528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200[ 528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059[ 528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000[ 528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000[ 528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020[ 528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86[ 528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc[ 528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80[ 528.951058] Call trace:[ 528.953516] __prestera_fi_is_direct+0x2c/0x68 [prestera][ 528.958952] __prestera_router_fib_event_work+0x100/0x158 [prestera][ 528.965348] process_one_work+0x208/0x488[ 528.969387] worker_thread+0x4c/0x430[ 528.973068] kthread+0x120/0x138[ 528.976313] ret_from_fork+0x10/0x20[ 528.979909] ---[ end trace 0000000000000000 ]---[ 528.984998] ------------[ cut here ]------------[ 528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera][ 528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci][ 529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G W O 6.4.5 #1[ 529.024368] Hardware name: delta,tn48m-dn (DT)[ 529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera][ 529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera][ 529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera][ 529.055452] sp : ffff80000b20bc60[ 529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48[ 529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800[ 529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0[ 529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059[ 529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000[ 529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000[ 529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80[ 529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet thathas the link-local address as src and dst IP and will be forwarded toan external IP in the IPv6 Ext Hdr.For example, the script below generates a packet whose src IP is thelink-local address and dst is updated to 11::. # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done # python3 >>> from socket import * >>> from scapy.all import * >>> >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456" >>> >>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR) >>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1) >>> >>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW) >>> sk.sendto(bytes(pkt), (DST_ADDR, 0))For such a packet, we call ip6_route_input() to look up a route for thenext destination in these three functions depending on the header type. * ipv6_rthdr_rcv() * ipv6_rpl_srh_rcv() * ipv6_srh_rcv()If no route is found, ip6_null_entry is set to skb, and the followingdst_input(skb) calls ip6_pkt_drop().Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->devas the input device is the loopback interface. Then, we have to check ifskb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer dereffor ip6_null_entry.BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present pagePGD 0 P4D 0Oops: 0000 [#1] PREEMPT SMP PTICPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c #35Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503)Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01RSP: 0018:ffffc90000003c70 EFLAGS: 00000286RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0PKRU: 55555554Call Trace: ip6_pkt_drop (net/ipv6/route.c:4513) ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5455) process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895) __napi_poll (net/core/dev.c:6460) net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4231) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:725 net/socket.c:748) __sys_sendto (net/socket.c:2134) __x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)RIP: 0033:0x7f9dc751baeaCode: d8 64 89 02 48 c7 c0 ff f---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/qaic: Fix slicing memory leakThe temporary buffer storing slicing configuration data from user is onlyfreed on error. This is a memory leak. Free the buffer unconditionally.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/ttm: check null pointer before accessing when swappingAdd a check to avoid null pointer dereference as below:[ 90.002283] general protection fault, probably for non-canonicaladdress 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI[ 90.002292] KASAN: null-ptr-deref in range[0x0000000000000000-0x0000000000000007][ 90.002346] ? exc_general_protection+0x159/0x240[ 90.002352] ? asm_exc_general_protection+0x26/0x30[ 90.002357] ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm][ 90.002365] ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm][ 90.002373] ttm_bo_swapout+0x134/0x7f0 [ttm][ 90.002383] ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm][ 90.002391] ? lock_acquire+0x44d/0x4f0[ 90.002398] ? ttm_device_swapout+0xa5/0x260 [ttm][ 90.002412] ? lock_acquired+0x355/0xa00[ 90.002416] ? do_raw_spin_trylock+0xb6/0x190[ 90.002421] ? __pfx_lock_acquired+0x10/0x10[ 90.002426] ? ttm_global_swapout+0x25/0x210 [ttm][ 90.002442] ttm_device_swapout+0x198/0x260 [ttm][ 90.002456] ? __pfx_ttm_device_swapout+0x10/0x10 [ttm][ 90.002472] ttm_global_swapout+0x75/0x210 [ttm][ 90.002486] ttm_tt_populate+0x187/0x3f0 [ttm][ 90.002501] ttm_bo_handle_move_mem+0x437/0x590 [ttm][ 90.002517] ttm_bo_validate+0x275/0x430 [ttm][ 90.002530] ? __pfx_ttm_bo_validate+0x10/0x10 [ttm][ 90.002544] ? kasan_save_stack+0x33/0x60[ 90.002550] ? kasan_set_track+0x25/0x30[ 90.002554] ? __kasan_kmalloc+0x8f/0xa0[ 90.002558] ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu][ 90.003023] ? ttm_resource_alloc+0xf6/0x220 [ttm][ 90.003038] amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu][ 90.003210] ? __x64_sys_ioctl+0x131/0x1a0[ 90.003210] ? do_syscall_64+0x60/0x90
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:skbuff: skb_segment, Call zero copy functions before using skbuff fragsCommit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functionsonce per nskb") added the call to zero copy functions in skb_segment().The change introduced a bug in skb_segment() because skb_orphan_frags()may possibly change the number of fragments or allocate new fragmentsaltogether leaving nrfrags and frag to point to the old values. This cancause a panic with stacktrace like the one below.[ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc[ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26[ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0[ 194.021892] Call Trace:[ 194.027422] [ 194.072861] tcp_gso_segment+0x107/0x540[ 194.082031] inet_gso_segment+0x15c/0x3d0[ 194.090783] skb_mac_gso_segment+0x9f/0x110[ 194.095016] __skb_gso_segment+0xc1/0x190[ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem][ 194.107071] dev_qdisc_enqueue+0x16/0x70[ 194.110884] __dev_queue_xmit+0x63b/0xb30[ 194.121670] bond_start_xmit+0x159/0x380 [bonding][ 194.128506] dev_hard_start_xmit+0xc3/0x1e0[ 194.131787] __dev_queue_xmit+0x8a0/0xb30[ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan][ 194.141477] dev_hard_start_xmit+0xc3/0x1e0[ 194.144622] sch_direct_xmit+0xe3/0x280[ 194.147748] __dev_queue_xmit+0x54a/0xb30[ 194.154131] tap_get_user+0x2a8/0x9c0 [tap][ 194.157358] tap_sendmsg+0x52/0x8e0 [tap][ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net][ 194.173631] handle_tx+0xcd/0xe0 [vhost_net][ 194.176959] vhost_worker+0x76/0xb0 [vhost][ 194.183667] kthread+0x118/0x140[ 194.190358] ret_from_fork+0x1f/0x30[ 194.193670] In this case calling skb_orphan_frags() updated nr_frags leaving nrfragslocal variable in skb_segment() stale. This resulted in the code hittingi >= nrfrags prematurely and trying to move to next frag_skb usinglist_skb pointer, which was NULL, and caused kernel panic. Move the callto zero copy functions before using frags and nr_frags.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: u_serial: Add null pointer check in gserial_suspendConsider a case where gserial_disconnect has already clearedgser->ioport. And if gserial_suspend gets called afterwards,it will lead to accessing of gser->ioport and thus causingnull pointer dereference.Avoid this by adding a null pointer check. Added a staticspinlock to prevent gser->ioport from becoming null afterthe newly added null pointer check.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFSv4.2: Rework scratch handling for READ_PLUS (again)I found that the read code might send multiple requests using the samenfs_pgio_header, but nfs4_proc_read_setup() is only called once. This ishow we ended up occasionally double-freeing the scratch buffer, but alsomeans we set a NULL pointer but non-zero length to the xdr scratchbuffer. This results in an oops the first time decoding needs to copysomething to scratch, which frequently happens when decoding READ_PLUShole segments.I fix this by moving scratch handling into the pageio read code. Iprovide a function to allocate scratch space for decoding read replies,and free the scratch buffer when the nfs_pgio_header is freed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bus: fsl-mc: don't assume child devices are all fsl-mc devicesChanges in VFIO caused a pseudo-device to be created as child offsl-mc devices causing a crash [1] when trying to bind a fsl-mcdevice to VFIO. Fix this by checking the device type when enumeratingfsl-mc child devices.[1]Modules linked in:Internal error: Oops: 0000000096000004 [#1] PREEMPT SMPCPU: 6 PID: 1289 Comm: sh Not tainted 6.2.0-rc5-00047-g7c46948a6e9c #2Hardware name: NXP Layerscape LX2160ARDB (DT)pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : mc_send_command+0x24/0x1f0lr : dprc_get_obj_region+0xfc/0x1c0sp : ffff80000a88b900x29: ffff80000a88b900 x28: ffff48a9429e1400 x27: 00000000000002b2x26: ffff48a9429e1718 x25: 0000000000000000 x24: 0000000000000000x23: ffffd59331ba3918 x22: ffffd59331ba3000 x21: 0000000000000000x20: ffff80000a88b9b8 x19: 0000000000000000 x18: 0000000000000001x17: 7270642f636d2d6c x16: 73662e3030303030 x15: ffffffffffffffffx14: ffffd59330f1d668 x13: ffff48a8727dc389 x12: ffff48a8727dc386x11: 0000000000000002 x10: 00008ceaf02f35d4 x9 : 0000000000000012x8 : 0000000000000000 x7 : 0000000000000006 x6 : ffff80000a88bab0x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000a88b9e8x2 : ffff80000a88b9e8 x1 : 0000000000000000 x0 : ffff48a945142b80Call trace: mc_send_command+0x24/0x1f0 dprc_get_obj_region+0xfc/0x1c0 fsl_mc_device_add+0x340/0x590 fsl_mc_obj_device_add+0xd0/0xf8 dprc_scan_objects+0x1c4/0x340 dprc_scan_container+0x38/0x60 vfio_fsl_mc_probe+0x9c/0xf8 fsl_mc_driver_probe+0x24/0x70 really_probe+0xbc/0x2a8 __driver_probe_device+0x78/0xe0 device_driver_attach+0x30/0x68 bind_store+0xa8/0x130 drv_attr_store+0x24/0x38 sysfs_kf_write+0x44/0x60 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x334/0x448 ksys_write+0x68/0xf0 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x108 el0_svc_common.constprop.1+0x94/0xf8 do_el0_svc+0x38/0xb0 el0_svc+0x20/0x50 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x174/0x178Code: aa0103f4 a9025bf5 d5384100 b9400801 (79401260)---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:regulator: da9063: better fix null deref with partial DTTwo versions of the original patch were sent but V1 was merged insteadof V2 due to a mistake.So update to V2.The advantage of V2 is that it completely avoids dereferencing the pointer,even just to take the address, which may fix problems with some compilers.Both versions work on my gcc 9.4 but use the safer one.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ip6mr: Fix skb_under_panic in ip6mr_cache_report()skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/habanalabs: fix mem leak in capture user mappingsThis commit fixes a memory leak caused when clearing the user_mappingsinfo when a new context is opened immediately after user_mapping iscaptured and a hard reset is performed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix race issue between cpu buffer write and swapWarning happened in rb_end_commit() at code: if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))) WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142 rb_commit+0x402/0x4a0 Call Trace: ring_buffer_unlock_commit+0x42/0x250 trace_buffer_unlock_commit_regs+0x3b/0x250 trace_event_buffer_commit+0xe5/0x440 trace_event_buffer_reserve+0x11c/0x150 trace_event_raw_event_sched_switch+0x23c/0x2c0 __traceiter_sched_switch+0x59/0x80 __schedule+0x72b/0x1580 schedule+0x92/0x120 worker_thread+0xa0/0x6f0It is because the race between writing event into cpu buffer and swappingcpu buffer through file per_cpu/cpu0/snapshot: Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1 -------- -------- tracing_snapshot_write() [...] ring_buffer_lock_reserve() cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a'; [...] rb_reserve_next_event() [...] ring_buffer_swap_cpu() if (local_read(&cpu_buffer_a->committing)) goto out_dec; if (local_read(&cpu_buffer_b->committing)) goto out_dec; buffer_a->buffers[cpu] = cpu_buffer_b; buffer_b->buffers[cpu] = cpu_buffer_a; // 2. cpu_buffer has swapped here. rb_start_commit(cpu_buffer); if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer' [...] // has not changed here. return NULL; } cpu_buffer_b->buffer = buffer_a; cpu_buffer_a->buffer = buffer_b; [...] // 4. Reserve event from 'cpu_buffer_a'. ring_buffer_unlock_commit() [...] cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!! rb_commit(cpu_buffer) rb_end_commit() // 6. WARN for the wrong 'committing' state !!!Based on above analysis, we can easily reproduce by following testcase: ``` bash #!/bin/bash dmesg -n 7 sysctl -w kernel.panic_on_warn=1 TR=/sys/kernel/tracing echo 7 > ${TR}/buffer_size_kb echo "sched:sched_switch" > ${TR}/set_event while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & ```To fix it, IIUC, we can use smp_call_function_single() to do the swap onthe target cpu where the buffer is located, so that above race would beavoided.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: dcb: choose correct policy to parse DCB_ATTR_BCNThe dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],which is introduced in commit 859ee3c43812 ("DCB: Add support for DCBBCN"). Please see the comment in below codestatic int dcbnl_bcn_setcfg(...){ ... ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. ) // !!! dcbnl_pfc_up_nest for attributes // DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs ... for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) { // !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs ... value_byte = nla_get_u8(data[i]); ... } ... for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) { // !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs ... value_int = nla_get_u32(data[i]); ... } ...}That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nestattributes to parse nlattr defined in dcbnl_pfc_up_attrs. But thefollowing access code fetch each nlattr as dcbnl_bcn_attrs attributes.By looking up the associated nla_policy for dcbnl_bcn_attrs. We can findthe beginning part of these two policies are "same".static const struct nla_policy dcbnl_pfc_up_nest[...] = { [DCB_PFC_UP_ATTR_0] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_1] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_2] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_3] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_4] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_5] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_6] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_7] = {.type = NLA_U8}, [DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},};static const struct nla_policy dcbnl_bcn_nest[...] = { [DCB_BCN_ATTR_RP_0] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_1] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_2] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_3] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_4] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_5] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_6] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_7] = {.type = NLA_U8}, [DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG}, // from here is somewhat different [DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32}, ... [DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG},};Therefore, the current code is buggy and thisnla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and usethe adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.Hence use the correct policy dcbnl_bcn_nest to parse the nestedtb[DCB_ATTR_BCN] TLV.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: fix memory leak in mes self testThe fences associated with mes queue have to be freedup during amdgpu_ring_fini.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_createThe memory pointed to by the fs->any pointer is not freed in the errorpath of mlx5e_fs_tt_redirect_any_create, which can lead to a memory leak.Fix by freeing the memory in the error path, thereby making the error pathidentical to mlx5e_fs_tt_redirect_any_destroy().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_conn: fail SCO/ISO via hci_conn_failed if ACL gone earlyNot calling hci_(dis)connect_cfm before deleting conn referred to by asocket generally results to use-after-free.When cleaning up SCO connections when the parent ACL is deleted tooearly, use hci_conn_failed to do the connection cleanup properly.We also need to clean up ISO connections in a similar situation whenconnecting has started but LE Create CIS is not yet sent, so do it toohere.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: prevent use-after-free by freeing the cfile laterIn smb2_compound_op we have a possible use-after-freewhich can cause hard to debug problems later on.This was revealed during stress testing with KASAN enabledkernel. Fixing it by moving the cfile free call toa few lines below, after the usage.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: phy: phy-tahvo: fix memory leak in tahvo_usb_probe()Smatch reports:drivers/usb/phy/phy-tahvo.c: tahvo_usb_probe()warn: missing unwind goto?After geting irq, if ret < 0, it will return without error handling tofree memory.Just add error handling to fix this problem.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid10: fix null-ptr-deref of mreplace in raid10_sync_requestThere are two check of 'mreplace' in raid10_sync_request(). In the firstcheck, 'need_replace' will be set and 'mreplace' will be used later ifno-Faulty 'mreplace' exists, In the second check, 'mreplace' will beset to NULL if it is Faulty, but 'need_replace' will not be changedaccordingly. null-ptr-deref occurs if Faulty is set between two check.Fix it by merging two checks into one. And replace 'need_replace' with'mreplace' because their values are always the same.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mwifiex: avoid possible NULL skb pointer dereferenceIn 'mwifiex_handle_uap_rx_forward()', always check the valuereturned by 'skb_copy()' to avoid potential NULL pointerdereference in 'mwifiex_uap_queue_bridged_pkt()', and droporiginal skb in case of copying failure.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: mdp3: Fix resource leaks in of_find_device_by_nodeUse put_device to release the object get through of_find_device_by_node,avoiding resource leaks.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: Fix potential use-after-free when clear keysSimilar to commit c5d2b6fa26b5 ("Bluetooth: Fix use-after-free inhci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu()call.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfsAs the ramfs-based tmpfs uses ramfs_init_fs_context() for theinit_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()to free it and avoid a memory leak.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: xsk: Fix crash on regular rq reactivationWhen the regular rq is reactivated after the XSK socket is closedit could be reading stale cqes which eventually corrupts the rq.This leads to no more traffic being received on the regular rq and acrash on the next close or deactivation of the rq.Kal Cuttler Conely reported this issue as a crash on the releasepath when the xdpsock sample program is stopped (killed) and restartedin sequence while traffic is running.This patch flushes all cqes when during the rq flush. The cqe flushingis done in the reset state of the rq. mlx5e_rq_to_ready code is movedinto the flush function to allow for this.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:modpost: fix off by one in is_executable_section()The > comparison should be >= to prevent an out of bounds arrayaccess.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm: kmem: fix a NULL pointer dereference in obj_stock_flush_required()KCSAN found an issue in obj_stock_flush_required():stock->cached_objcg can be reset between the check and dereference:==================================================================BUG: KCSAN: data-race in drain_all_stock / drain_obj_stockwrite to 0xffff888237c2a2f8 of 8 bytes by task 19625 on cpu 0: drain_obj_stock+0x408/0x4e0 mm/memcontrol.c:3306 refill_obj_stock+0x9c/0x1e0 mm/memcontrol.c:3340 obj_cgroup_uncharge+0xe/0x10 mm/memcontrol.c:3408 memcg_slab_free_hook mm/slab.h:587 [inline] __cache_free mm/slab.c:3373 [inline] __do_kmem_cache_free mm/slab.c:3577 [inline] kmem_cache_free+0x105/0x280 mm/slab.c:3602 __d_free fs/dcache.c:298 [inline] dentry_free fs/dcache.c:375 [inline] __dentry_kill+0x422/0x4a0 fs/dcache.c:621 dentry_kill+0x8d/0x1e0 dput+0x118/0x1f0 fs/dcache.c:913 __fput+0x3bf/0x570 fs/file_table.c:329 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x123/0x160 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop+0xcf/0xe0 kernel/entry/common.c:171 exit_to_user_mode_prepare+0x6a/0xa0 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:296 do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcdread to 0xffff888237c2a2f8 of 8 bytes by task 19632 on cpu 1: obj_stock_flush_required mm/memcontrol.c:3319 [inline] drain_all_stock+0x174/0x2a0 mm/memcontrol.c:2361 try_charge_memcg+0x6d0/0xd10 mm/memcontrol.c:2703 try_charge mm/memcontrol.c:2837 [inline] mem_cgroup_charge_skmem+0x51/0x140 mm/memcontrol.c:7290 sock_reserve_memory+0xb1/0x390 net/core/sock.c:1025 sk_setsockopt+0x800/0x1e70 net/core/sock.c:1525 udp_lib_setsockopt+0x99/0x6c0 net/ipv4/udp.c:2692 udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2817 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3668 __sys_setsockopt+0x1c3/0x230 net/socket.c:2271 __do_sys_setsockopt net/socket.c:2282 [inline] __se_sys_setsockopt net/socket.c:2279 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcdvalue changed: 0xffff8881382d52c0 -> 0xffff888138893740Reported by Kernel Concurrency Sanitizer on:CPU: 1 PID: 19632 Comm: syz-executor.0 Not tainted 6.3.0-rc2-syzkaller-00387-g534293368afa #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023Fix it by using READ_ONCE()/WRITE_ONCE() for all accesses tostock->cached_objcg.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr()Here is a BUG report from syzbot:BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632Call Trace: ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 vfs_listxattr fs/xattr.c:457 [inline] listxattr+0x293/0x2d0 fs/xattr.c:804Fix the logic of ea_all iteration. When the ea->name_len is 0,return immediately, or Add2Ptr() would visit invalid memoryin the next loop.[almaz.alexandrovich@paragon-software.com: lines of the patch have changed]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:blk-cgroup: Reinit blkg_iostat_set after clearing in blkcg_reset_stats()When blkg_alloc() is called to allocate a blkcg_gq structurewith the associated blkg_iostat_set's, there are 2 fields withinblkg_iostat_set that requires proper initialization - blkg & sync.The former field was introduced by commit 3b8cc6298724 ("blk-cgroup:Optimize blkcg_rstat_flush()") while the later one was introduced bycommit f73316482977 ("blk-cgroup: reimplement basic IO stats usingcgroup rstat").Unfortunately those fields in the blkg_iostat_set's are not properlyre-initialized when they are cleared in v1's blkcg_reset_stats(). Thiscan lead to a kernel panic due to NULL pointer access of the blkgpointer. The missing initialization of sync is less problematic andcan be a problem in a debug kernel due to missing lockdep initialization.Fix these problems by re-initializing them after memory clearing.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: mediatek: fix of_iomap memory leakSmatch reports:drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn: 'base' from of_iomap() not released on lines: 496.This problem was also found in linux-next. In mtk_clk_simple_probe(),base is not released when handling errorsif clk_data is not existed, which may cause a leak.So free_base should be added here to release base.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: platform: mediatek: vpu: fix NULL ptr dereferenceIf pdev is NULL, then it is still dereferenced.This fixes this smatch warning:drivers/media/platform/mediatek/vpu/mtk_vpu.c:570 vpu_load_firmware() warn: address of NULL pointer 'pdev'
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xsk: Fix xsk_diag use-after-free error during socket cleanupFix a use-after-free error that is possible if the xsk_diag interfaceis used after the socket has been unbound from the device. This canhappen either due to the socket being closed or the devicedisappearing. In the early days of AF_XDP, the way we tested that asocket was not bound to a device was to simply check if the netdevicepointer in the xsk socket structure was NULL. Later, a better systemwas introduced by having an explicit state variable in the xsk socketstruct. For example, the state of a socket that is on the way to beingclosed and has been unbound from the device is XSK_UNBOUND.The commit in the Fixes tag below deleted the old way of signallingthat a socket is unbound, setting dev to NULL. This in the belief thatall code using the old way had been exterminated. That wasunfortunately not true as the xsk diagnostics code was still using theold way and thus does not work as intended when a socket is goingdown. Fix this by introducing a test against the state variable. Ifthe socket is in the state XSK_UNBOUND, simply abort the diagnostic'snetlink operation.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:powercap: arm_scmi: Remove recursion while parsing zonesPowercap zones can be defined as arranged in a hierarchy of trees and whenregistering a zone with powercap_register_zone(), the kernel powercapsubsystem expects this to happen starting from the root zones down to theleaves; on the other side, de-registration by powercap_deregister_zone()must begin from the leaf zones.Available SCMI powercap zones are retrieved dynamically from the platformat probe time and, while any defined hierarchy between the zones isdescribed properly in the zones descriptor, the platform returns theavailables zones with no particular well-defined order: as a consequence,the trees possibly composing the hierarchy of zones have to be somehowwalked properly to register the retrieved zones from the root.Currently the ARM SCMI Powercap driver walks the zones using a recursivealgorithm; this approach, even though correct and tested can lead to kernelstack overflow when processing a returned hierarchy of zones composed byparticularly high trees.Avoid possible kernel stack overflow by substituting the recursive approachwith an iterative one supported by a dynamically allocated stack-like datastructure.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: don't check PageError in __extent_writepage__extent_writepage currenly sets PageError whenever any error happens,and the also checks for PageError to decide if to call error handling.This leads to very unclear responsibility for cleaning up on errors.In the VM and generic writeback helpers the basic idea is that onceI/O is fired off all error handling responsibility is delegated to theend I/O handler. But if that end I/O handler sets the PageError bit,and the submitter checks it, the bit could in some cases leak into thesubmission context for fast enough I/O.Fix this by simply not checking PageError and just using the localret variable to check for submission errors. This also fundamentallysolves the long problem documented in a comment in __extent_writepageby never leaking the error bit into the submission context.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: ses: Handle enclosure with just a primary component gracefullyThis reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosurehas no components") and introduces proper handling of case where there areno detected secondary components, but primary component (enumerated innum_enclosures) does exist. That fix was originally proposed by Ding Hui.Completely ignoring devices that have one primary enclosure and nosecondary one results in ses_intf_add() bailing completely scsi 2:0:0:254: enclosure has no enumerated components scsi 2:0:0:254: Failed to bind enclosure -12ven in valid configurations sucheven on valid configurations with 1 primary and 0 secondary enclosures asbelow: # sg_ses /dev/sg0 3PARdata SES 3321 Supported diagnostic pages: Supported Diagnostic Pages [sdp] [0x0] Configuration (SES) [cf] [0x1] Short Enclosure Status (SES) [ses] [0x8] # sg_ses -p cf /dev/sg0 3PARdata SES 3321 Configuration diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 enclosure descriptor list Subenclosure identifier: 0 [primary] relative ES process id: 0, number of ES processes: 1 number of type descriptor headers: 1 enclosure logical identifier (hex): 20000002ac02068d enclosure vendor: 3PARdata product: VV rev: 3321 type descriptor header and text list Element type: Unspecified, subenclosure id: 0 number of possible elements: 1The changelog for the original fix follows=====We can get a crash when disconnecting the iSCSI session,the call trace like this: [ffff00002a00fb70] kfree at ffff00000830e224 [ffff00002a00fba0] ses_intf_remove at ffff000001f200e4 [ffff00002a00fbd0] device_del at ffff0000086b6a98 [ffff00002a00fc50] device_unregister at ffff0000086b6d58 [ffff00002a00fc70] __scsi_remove_device at ffff00000870608c [ffff00002a00fca0] scsi_remove_device at ffff000008706134 [ffff00002a00fcc0] __scsi_remove_target at ffff0000087062e4 [ffff00002a00fd10] scsi_remove_target at ffff0000087064c0 [ffff00002a00fd70] __iscsi_unbind_session at ffff000001c872c4 [ffff00002a00fdb0] process_one_work at ffff00000810f35c [ffff00002a00fe00] worker_thread at ffff00000810f648 [ffff00002a00fe70] kthread at ffff000008116e98In ses_intf_add, components count could be 0, and kcalloc 0 size scomp,but not saved in edev->component[i].scratchIn this situation, edev->component[0].scratch is an invalid pointer,when kfree it in ses_intf_remove_enclosure, a crash like above would happenThe call trace also could be other random cases when kfree cannot catchthe invalid pointerWe should not use edev->component[] array when the components count is 0We also need check index when use edev->component[] array inses_enclosure_data_process=====
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: snic: Fix possible memory leak if device_add() failsIf device_add() returns error, the name allocated by dev_set_name() needsbe freed. As the comment of device_add() says, put_device() should be usedto give up the reference in the error path. So fix this by callingput_device(), then the name can be freed in kobject_cleanp().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: cpumap: Fix memory leak in cpu_map_update_elemSyzkaller reported a memory leak as follows:BUG: memory leakunreferenced object 0xff110001198ef748 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 4a 19 00 00 80 ad e3 e4 fe ff c0 00 ....J........... 00 b2 d3 0c 01 00 11 ff 28 f5 8e 19 01 00 11 ff ........(....... backtrace: [] __cpu_map_entry_alloc+0xf7/0xb00 [] cpu_map_update_elem+0x2fe/0x3d0 [] bpf_map_update_value.isra.0+0x2bd/0x520 [] map_update_elem+0x4cb/0x720 [] __se_sys_bpf+0x8c3/0xb90 [] do_syscall_64+0x30/0x40 [] entry_SYSCALL_64_after_hwframe+0x61/0xc6BUG: memory leakunreferenced object 0xff110001198ef528 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] __cpu_map_entry_alloc+0x260/0xb00 [] cpu_map_update_elem+0x2fe/0x3d0 [] bpf_map_update_value.isra.0+0x2bd/0x520 [] map_update_elem+0x4cb/0x720 [] __se_sys_bpf+0x8c3/0xb90 [] do_syscall_64+0x30/0x40 [] entry_SYSCALL_64_after_hwframe+0x61/0xc6BUG: memory leakunreferenced object 0xff1100010fd93d68 (size 8): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [] kvmalloc_node+0x11e/0x170 [] __cpu_map_entry_alloc+0x2f0/0xb00 [] cpu_map_update_elem+0x2fe/0x3d0 [] bpf_map_update_value.isra.0+0x2bd/0x520 [] map_update_elem+0x4cb/0x720 [] __se_sys_bpf+0x8c3/0xb90 [] do_syscall_64+0x30/0x40 [] entry_SYSCALL_64_after_hwframe+0x61/0xc6In the cpu_map_update_elem flow, when kthread_stop is called beforecalling the threadfn of rcpu->kthread, since the KTHREAD_SHOULD_STOP bitof kthread has been set by kthread_stop, the threadfn of rcpu->kthreadwill never be executed, and rcpu->refcnt will never be 0, which willlead to the allocated rcpu, rcpu->queue and rcpu->queue->queue cannot bereleased.Calling kthread_stop before executing kthread's threadfn will return-EINTR. We can complete the release of memory resources in this state.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/ttm: fix bulk_move corruption when adding a entryWhen the resource is the first in the bulk_move range, adding it again(thus moving it to the tail) will corrupt the list since the firstpointer is not moved. This eventually lead to null pointer deref inttm_lru_bulk_move_del()
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-freeStruct pcie_link_state->downstream is a pointer to the pci_dev of function0. Previously we retained that pointer when removing function 0, andsubsequent ASPM policy changes dereferenced it, resulting in ause-after-free warning from KASAN, e.g.: # echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove # echo powersave > /sys/module/pcie_aspm/parameters/policy BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500 Call Trace: kasan_report+0xae/0xe0 pcie_config_aspm_link+0x42d/0x500 pcie_aspm_set_policy+0x8e/0x1a0 param_attr_store+0x162/0x2c0 module_attr_store+0x3e/0x80PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPMControl value in all functions of multi-function devices.Disable ASPM and free the pcie_link_state when any child function isremoved so we can discard the dangling pcie_link_state->downstream pointerand maintain the same ASPM Control configuration for all functions.[bhelgaas: commit log and comment]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: don't reset unchangable mount option in f2fs_remount()syzbot reports a bug as below:general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASANRIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcdThe root cause is race condition as below:- since it tries to remount rw filesystem, so that do_remount won'tcall sb_prepare_remount_readonly to block fallocate, there may be racecondition in between remount and fallocate.- in f2fs_remount(), default_options() will reset mount option to defaultone, and then update it based on result of parse_options(), so there isa hole which race condition can happen.Thread A Thread B- f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE)- f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: imxfb: Removed unneeded release_mem_regionRemove unnecessary release_mem_region from the error path to preventmem region from being released twice, which could avoid resource leakor other unexpected issues.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Fix potential NULL pointer dereferenceKlocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validatepointer before dereferencing the pointer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:FS: JFS: Fix null-ptr-deref Read in txBegin Syzkaller reported an issue where txBegin may be called on a superblock in a read-only mounted filesystem which leads to NULL pointer deref. This could be solved by checking if the filesystem is read-only before calling txBegin, and returning with appropiate error code.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring: wait interruptibly for request completions on exitWHen the ring exits, cleanup is done and the final cancelation andwaiting on completions is done by io_ring_exit_work. That function isinvoked by kworker, which doesn't take any signals. Because of that, itdoesn't really matter if we wait for completions in TASK_INTERRUPTIBLEor TASK_UNINTERRUPTIBLE state. However, it does matter to the hung taskdetection checker!Normally we expect cancelations and completions to happen ratherquickly. Some test cases, however, will exit the ring and park theowning task stopped (eg via SIGSTOP). If the owning task needs to runtask_work to complete requests, then io_ring_exit_work won't make anyprogress until the task is runnable again. Hence io_ring_exit_work cantrigger the hung task detection, which is particularly problematic ifpanic-on-hung-task is enabled.As the ring exit doesn't take signals to begin with, have it waitinterruptibly rather than uninterruptibly. io_uring has a separatestuck-exit warning that triggers independently anyway, so we're notreally missing anything by making this switch.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ibmvnic: Do not reset dql stats on NON_FATAL errAll ibmvnic resets, make a call to netdev_tx_reset_queue() whenre-opening the device. netdev_tx_reset_queue() resets the num_queuedand num_completed byte counters. These stats are used in Byte QueueLimit (BQL) algorithms. The difference between these two stats tracksthe number of bytes currently sitting on the physical NIC. ibmvnicincreases the number of queued bytes though calls tonetdev_tx_sent_queue() in the drivers xmit function. When, VIOS reportsthat it is done transmitting bytes, the ibmvnic device increases thenumber of completed bytes through calls to netdev_tx_completed_queue().It is important to note that the driver batches its transmit calls andnum_queued is increased every time that an skb is added to the nextbatch, not necessarily when the batch is sent to VIOS for transmission.Unlike other reset types, a NON FATAL reset will not flush the sub crqtx buffers. Therefore, it is possible for the batched skb array to bepartially full. So if there is call to netdev_tx_reset_queue() whenre-opening the device, the value of num_queued (0) would not accountfor the skb's that are currently batched. Eventually, when the batchis sent to VIOS, the call to netdev_tx_completed_queue() would increasenum_completed to a value greater than the num_queued. This causes aBUG_ON crash:ibmvnic 30000002: Firmware reports error, cause: adapter problem.Starting recovery...ibmvnic 30000002: tx error 600ibmvnic 30000002: tx error 600ibmvnic 30000002: tx error 600ibmvnic 30000002: tx error 600------------[ cut here ]------------kernel BUG at lib/dynamic_queue_limits.c:27!Oops: Exception in kernel mode, sig: 5[....]NIP dql_completed+0x28/0x1c0LR ibmvnic_complete_tx.isra.0+0x23c/0x420 [ibmvnic]Call Trace:ibmvnic_complete_tx.isra.0+0x3f8/0x420 [ibmvnic] (unreliable)ibmvnic_interrupt_tx+0x40/0x70 [ibmvnic]__handle_irq_event_percpu+0x98/0x270---[ end trace ]---Therefore, do not reset the dql stats when performing a NON_FATAL reset.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:soundwire: qcom: fix storing port config out-of-boundsThe 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14),however we index it starting from 1, not 0, to match real port numbers.This can lead to writing port config past 'pconfig' bounds andoverwriting next member of 'qcom_swrm_ctrl' struct. Reported also bysmatch: drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pwm: lpc32xx: Remove handling of PWM channelsBecause LPC32xx PWM controllers have only a single output which isregistered as the only PWM device/channel per controller, it is known inadvance that pwm->hwpwm value is always 0. On basis of this factsimplify the code by removing operations with pwm->hwpwm, there is nocontrols which require channel number as input.Even though I wasn't aware at the time when I forward ported that patch,this fixes a null pointer dereference as lpc32xx->chip.pwms is NULLbefore devm_pwmchip_add() is called.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cxl/acpi: Fix a use-after-free in cxl_parse_cfmws()KASAN and KFENCE detected an user-after-free in the CXL driver. Thishappens in the cxl_decoder_add() fail path. KASAN prints the followingerror: BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299)This happens in cxl_parse_cfmws(), where put_device() is called,releasing cxld, which is accessed later.Use the local variables in the dev_err() instead of pointing to thereleased memory. Since the dev_err() is printing a resource, change the opencoded print format to use the %pr format specifier.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:kobject: Add sanity check for kset->kobj.ktype in kset_register()When I register a kset in the following way: static struct kset my_kset; kobject_set_name(&my_kset.kobj, "my_kset"); ret = kset_register(&my_kset);A null pointer dereference exception is occurred:[ 4453.568337] Unable to handle kernel NULL pointer dereference at \virtual address 0000000000000028... ...[ 4453.810361] Call trace:[ 4453.813062] kobject_get_ownership+0xc/0x34[ 4453.817493] kobject_add_internal+0x98/0x274[ 4453.822005] kset_register+0x5c/0xb4[ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset]... ...Because I didn't initialize my_kset.kobj.ktype.According to the description in Documentation/core-api/kobject.rst: - A ktype is the type of object that embeds a kobject. Every structure that embeds a kobject needs a corresponding ktype.So add sanity check to make sure kset->kobj.ktype is not NULL.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:powerpc/rtas_flash: allow user copy to flash block cache objectsWith hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the/proc/powerpc/rtas/firmware_update interface to prepare a systemfirmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4The blocks of the firmware image are copied directly from user memoryto objects allocated from flash_block_cache, so flash_block_cache mustbe created using kmem_cache_create_usercopy() to mark it safe for useraccess.[mpe: Trim and indent oops]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:IB/hfi1: Fix possible panic during hotplug removeDuring hotplug remove it is possible that the update counters workmight be pending, and may run after memory has been freed.Cancel the update counters work before freeing memory.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fix disconnect vs accept raceDespite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero inrecvmsg()"), the mptcp protocol is still prone to a race betweendisconnect() (or shutdown) and accept.The root cause is that the mentioned commit checks the msk-levelflag, but mptcp_stream_accept() does acquire the msk-level lock,as it can rely directly on the first subflow lock.As reported by Christoph than can lead to a race where an msksocket is accepted after that mptcp_subflow_queue_clean() releasesthe listener socket lock and just before it takes destructiveactions leading to the following splat:BUG: kernel NULL pointer dereference, address: 0000000000000012PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0Oops: 0000 [#1] PREEMPT SMPCPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896aRBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: do_accept+0x1ae/0x260 net/socket.c:1872 __sys_accept4+0x9b/0x110 net/socket.c:1913 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x20/0x30 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8Address the issue by temporary removing the pending request socketfrom the accept queue, so that racing accept() can't touch them.After depleting the msk - the ssk still exists, as plain TCP sockets,re-insert them into the accept queue, so that later inet_csk_listen_stop()will complete the tcp socket disposal.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nf_tables: do not ignore genmask when looking up chain by idWhen adding a rule to a chain referring to its ID, if that chain had beendeleted on the same batch, the rule might end up referring to a deletedchain.This will lead to a WARNING like following:[ 33.098431] ------------[ cut here ]------------[ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260[ 33.099217] Modules linked in:[ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409[ 33.099726] Workqueue: events nf_tables_trans_destroy_work[ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260[ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7[ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202[ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000[ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000[ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000[ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500[ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10[ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000[ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0[ 33.104872] PKRU: 55555554[ 33.104999] Call Trace:[ 33.105113] [ 33.105214] ? show_regs+0x72/0x90[ 33.105371] ? __warn+0xa5/0x210[ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260[ 33.105732] ? report_bug+0x1f2/0x200[ 33.105902] ? handle_bug+0x46/0x90[ 33.106546] ? exc_invalid_op+0x19/0x50[ 33.106762] ? asm_exc_invalid_op+0x1b/0x20[ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260[ 33.107249] ? nf_tables_chain_destroy+0x30/0x260[ 33.107506] nf_tables_trans_destroy_work+0x669/0x680[ 33.107782] ? mark_held_locks+0x28/0xa0[ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10[ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70[ 33.108538] process_one_work+0x68c/0xb70[ 33.108755] ? lock_acquire+0x17f/0x420[ 33.108977] ? __pfx_process_one_work+0x10/0x10[ 33.109218] ? do_raw_spin_lock+0x128/0x1d0[ 33.109435] ? _raw_spin_lock_irq+0x71/0x80[ 33.109634] worker_thread+0x2bd/0x700[ 33.109817] ? __pfx_worker_thread+0x10/0x10[ 33.110254] kthread+0x18b/0x1d0[ 33.110410] ? __pfx_kthread+0x10/0x10[ 33.110581] ret_from_fork+0x29/0x50[ 33.110757] [ 33.110866] irq event stamp: 1651[ 33.111017] hardirqs last enabled at (1659): [] __up_console_sem+0x79/0xa0[ 33.111379] hardirqs last disabled at (1666): [] __up_console_sem+0x5e/0xa0[ 33.111740] softirqs last enabled at (1616): [] __irq_exit_rcu+0x9e/0xe0[ 33.112094] softirqs last disabled at (1367): [] __irq_exit_rcu+0x9e/0xe0[ 33.112453] ---[ end trace 0000000000000000 ]---This is due to the nft_chain_lookup_byid ignoring the genmask. After thischange, adding the new rule will fail as it will not find the chain.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/qaic: tighten bounds checking in decode_message()Copy the bounds checking from encode_message() to decode_message().This patch addresses the following concerns. Ensure that there isenough space for at least one header so that we don't have a negativesize later. if (msg_hdr_len < sizeof(*trans_hdr))Ensure that we have enough space to read the next header from themsg->data. if (msg_len > msg_hdr_len - sizeof(*trans_hdr)) return -EINVAL;Check that the trans_hdr->len is not below the minimum size: if (hdr_len < sizeof(*trans_hdr))This minimum check ensures that we don't corrupt memory indecode_passthrough() when we do. memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr));And finally, use size_add() to prevent an integer overflow: if (size_add(msg_len, hdr_len) > msg_hdr_len)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: ethernet: mvpp2_main: fix possible OOB write in mvpp2_ethtool_get_rxnfc()rules is allocated in ethtool_get_rxnfc and the size is determined byrule_cnt from user space. So rule_cnt needs to be check before usingrules to avoid OOB writing or NULL pointer dereference.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:x86/platform/uv: Use alternate source for socket to node dataThe UV code attempts to build a set of tables to allow it to dobidirectional socket<=>node lookups.But when nr_cpus is set to a smaller number than actually present, thecpu_to_node() mapping information for unused CPUs is not available tobuild_socket_tables(). This results in skipping some nodes or socketswhen creating the tables and leaving some -1's for later code to trip.over, causing oopses.The problem is that the socket<=>node lookups are created by doing aloop over all CPUs, then looking up the CPU's APICID and socket. Butif a CPU is not present, there is no way to start this lookup.Instead of looping over all CPUs, take CPUs out of the equationentirely. Loop over all APICIDs which are mapped to a valid NUMA node.Then just extract the socket-id from the APICID.This avoid tripping over disabled CPUs.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: fix slab-use-after-free in decode_session6When the xfrm device is set to the qdisc of the sfb type, the cb fieldof the sent skb may be modified during enqueuing. Then,slab-use-after-free may occur when the xfrm device sends IPv6 packets.The stack information is as follows:BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890Read of size 1 at addr ffff8881111458ef by task swapper/3/0CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014Call Trace:dump_stack_lvl+0xd9/0x150print_address_description.constprop.0+0x2c/0x3c0kasan_report+0x11d/0x130decode_session6+0x103f/0x1890__xfrm_decode_session+0x54/0xb0xfrmi_xmit+0x173/0x1ca0dev_hard_start_xmit+0x187/0x700sch_direct_xmit+0x1a3/0xc30__qdisc_run+0x510/0x17a0__dev_queue_xmit+0x2215/0x3b10neigh_connected_output+0x3c2/0x550ip6_finish_output2+0x55a/0x1550ip6_finish_output+0x6b9/0x1270ip6_output+0x1f1/0x540ndisc_send_skb+0xa63/0x1890ndisc_send_rs+0x132/0x6f0addrconf_rs_timer+0x3f1/0x870call_timer_fn+0x1a0/0x580expire_timers+0x29b/0x4b0run_timer_softirq+0x326/0x910__do_softirq+0x1d4/0x905irq_exit_rcu+0xb7/0x120sysvec_apic_timer_interrupt+0x97/0xc0asm_sysvec_apic_timer_interrupt+0x1a/0x20RIP: 0010:intel_idle_hlt+0x23/0x30Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4RSP: 0018:ffffc90000197d78 EFLAGS: 00000246RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9dR10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000cpuidle_enter_state+0xd3/0x6f0cpuidle_enter+0x4e/0xa0do_idle+0x2fe/0x3c0cpu_startup_entry+0x18/0x20start_secondary+0x200/0x290secondary_startup_64_no_verify+0x167/0x16bAllocated by task 939:kasan_save_stack+0x22/0x40kasan_set_track+0x25/0x30__kasan_slab_alloc+0x7f/0x90kmem_cache_alloc_node+0x1cd/0x410kmalloc_reserve+0x165/0x270__alloc_skb+0x129/0x330inet6_ifa_notify+0x118/0x230__ipv6_ifa_notify+0x177/0xbe0addrconf_dad_completed+0x133/0xe00addrconf_dad_work+0x764/0x1390process_one_work+0xa32/0x16f0worker_thread+0x67d/0x10c0kthread+0x344/0x440ret_from_fork+0x1f/0x30The buggy address belongs to the object at ffff888111145800which belongs to the cache skbuff_small_head of size 640The buggy address is located 239 bytes inside offreed 640-byte region [ffff888111145800, ffff888111145a80)As commit f855691975bb ("xfrm6: Fix the nexthdr offset in_decode_session6.") showed, xfrm_decode_session was originally intendedonly for the receive path. IP6CB(skb)->nhoff is not set duringtransmission. Therefore, set the cb field in the skb to 0 beforesending packets.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/amd/iommu_v2: Fix pasid_state refcount dec hit 0 warning on pasid unbindWhen unbinding pasid - a race condition exists vs outstanding page faults.To prevent this, the pasid_state object contains a refcount. * set to 1 on pasid bind * incremented on each ppr notification start * decremented on each ppr notification done * decremented on pasid unbindSince refcount_dec assumes that refcount will never reach 0: the current implementation causes the following to be invoked on pasid unbind: REFCOUNT_WARN("decrement hit 0; leaking memory")Fix this issue by changing refcount_dec to refcount_dec_and_testto explicitly handle refcount=1.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAFib_dealloc_device() should be called only after device cleanup. Fix thedealloc sequence.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFFThe previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute forbroadcast cutoff") added one additional attribute namedIFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff.However, it forgot to describe the nla_policy at macvlan_policy(drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integercan be faked as empty (0 bytes) by a malicious user, which could leadsto OOB in heap just like CVE-2023-3773.To fix it, this commit just completes the nla_policy description forIFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids thepotential OOB read.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()The following call trace was observed:localhost kernel: nvme nvme0: NVME-FC{0}: controller connect completelocalhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291"localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core]localhost kernel: Call Trace:localhost kernel: dump_stack_lvl+0x57/0x7dlocalhost kernel: check_preemption_disabled+0xc8/0xd0localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]Use raw_smp_processor_id() instead of smp_processor_id().Also use queue_work() across the driver instead of queue_work_on() thusavoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length checkThe vdpa_nl_policy structure is used to validate the nlattr when parsingthe incoming nlmsg. It will ensure the attribute being described producesa valid nlattr pointer in info->attrs before entering into each handlerin vdpa_nl_ops.That is to say, the missing part in vdpa_nl_policy may lead to illegalnlattr after parsing, which could lead to OOB read just like CVE-2023-3773.This patch adds the missing nla_policy for vdpa max vqp attr to avoidsuch bugs.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: unmap and remove csa_va properlyRoot PD BO should be reserved before unmap and removea bo_va from VM otherwise lockdep will complain.v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu][14616.937096] Call Trace:[14616.937097] [14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu][14616.937187] drm_file_free+0x1d6/0x300 [drm][14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm][14616.937220] drm_release+0x5e/0x100 [drm][14616.937234] __fput+0x9f/0x280[14616.937239] ____fput+0xe/0x20[14616.937241] task_work_run+0x61/0x90[14616.937246] exit_to_user_mode_prepare+0x215/0x220[14616.937251] syscall_exit_to_user_mode+0x2a/0x60[14616.937254] do_syscall_64+0x48/0x90[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctxwhen mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memorypointed by 'in' is not released, which will cause memory leak. Move memoryrelease after mlx5_cmd_exec.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urbThe syzbot fuzzer identified a problem in the usbnet driver:usb 1-1: BOGUS urb xfer, pipe 3 != type 1WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504Modules linked in:CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023Workqueue: mld mld_ifc_workRIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7RSP: 0018:ffffc9000463f568 EFLAGS: 00010086RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0Call Trace: usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3578 [inline] dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594...This bug is caused by the fact that usbnet trusts the bulk endpointaddresses its probe routine receives in the driver_info structure, andit does not check to see that these endpoints actually exist and havethe expected type and directions.The fix is simply to add such a check.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: amd-pstate: fix global sysfs attribute typeIn commit 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()")the "amd_pstate" attributes where moved from a dedicated kobject to thecpu root kobject.While the dedicated kobject expects to contain kobj_attributes the rootkobject needs device_attributes.As the changed arguments are not used by the callbacks it works most ofthe time.However CFI will detect this issue:[ 4947.849350] CFI failure at dev_attr_show+0x24/0x60 (target: show_status+0x0/0x70; expected type: 0x8651b1de)...[ 4947.849409] Call Trace:[ 4947.849410] [ 4947.849411] ? __warn+0xcf/0x1c0[ 4947.849414] ? dev_attr_show+0x24/0x60[ 4947.849415] ? report_cfi_failure+0x4e/0x60[ 4947.849417] ? handle_cfi_failure+0x14c/0x1d0[ 4947.849419] ? __cfi_show_status+0x10/0x10[ 4947.849420] ? handle_bug+0x4f/0x90[ 4947.849421] ? exc_invalid_op+0x1a/0x60[ 4947.849422] ? asm_exc_invalid_op+0x1a/0x20[ 4947.849424] ? __cfi_show_status+0x10/0x10[ 4947.849425] ? dev_attr_show+0x24/0x60[ 4947.849426] sysfs_kf_seq_show+0xa6/0x110[ 4947.849433] seq_read_iter+0x16c/0x4b0[ 4947.849436] vfs_read+0x272/0x2d0[ 4947.849438] ksys_read+0x72/0xe0[ 4947.849439] do_syscall_64+0x76/0xb0[ 4947.849440] ? do_user_addr_fault+0x252/0x650[ 4947.849442] ? exc_page_fault+0x7a/0x1b0[ 4947.849443] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/i915: mark requests for GuC virtual engines to avoid use-after-freeReferences to i915_requests may be trapped by userspace inside async_file or dmabuf (dma-resv) and held indefinitely across differentproceses. To counter-act the memory leaks, we try to not to keepreferences from the request past their completion.On the other side on fence release we need to know if rq->engineis valid and points to hw engine (true for non-virtual requests).To make it possible extra bit has been added to rq->execution_mask,for marking virtual engines.(cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:HID: hyperv: avoid struct memcpy overrun warningA previous patch addressed the fortified memcpy warning for mostbuilds, but I still see this one with gcc-9:In file included from include/linux/string.h:254, from drivers/hid/hid-hyperv.c:8:In function 'fortify_memcpy_chk', inlined from 'mousevsc_on_receive' at drivers/hid/hid-hyperv.c:272:3:include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 583 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~My guess is that the WARN_ON() itself is what confuses gcc, so it nolonger sees that there is a correct range check. Rework the code in away that helps readability and avoids the warning.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()The "exc->key_len" is a u16 that comes from the user. If it's overIW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/damon/core: initialize damo_filter->list from damos_new_filter()damos_new_filter() is not initializing the list field of newly allocatedfilter object. However, DAMON sysfs interface and DAMON_RECLAIM are notinitializing it after calling damos_new_filter(). As a result, accessinguninitialized memory is possible. Actually, adding multiple DAMOS filtersvia DAMON sysfs interface caused NULL pointer dereferencing. Initializethe field just after the allocation from damos_new_filter().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iavf: Fix use-after-free in free_netdevWe do netif_napi_add() for all allocated q_vectors[], but potentiallydo netif_napi_del() for part of them, then kfree q_vectors and leaveinvalid pointers at dev->napi_list.Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) waitResult:[ 4093.900222] ==================================================================[ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390[ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699[ 4093.900233][ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1[ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021[ 4093.900239] Call Trace:[ 4093.900244] dump_stack+0x71/0xab[ 4093.900249] print_address_description+0x6b/0x290[ 4093.900251] ? free_netdev+0x308/0x390[ 4093.900252] kasan_report+0x14a/0x2b0[ 4093.900254] free_netdev+0x308/0x390[ 4093.900261] iavf_remove+0x825/0xd20 [iavf][ 4093.900265] pci_device_remove+0xa8/0x1f0[ 4093.900268] device_release_driver_internal+0x1c6/0x460[ 4093.900271] pci_stop_bus_device+0x101/0x150[ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20[ 4093.900275] pci_iov_remove_virtfn+0x187/0x420[ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10[ 4093.900278] ? pci_get_subsys+0x90/0x90[ 4093.900280] sriov_disable+0xed/0x3e0[ 4093.900282] ? bus_find_device+0x12d/0x1a0[ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e][ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e][ 4093.900299] ? pci_get_device+0x7c/0x90[ 4093.900300] ? pci_get_subsys+0x90/0x90[ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210[ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10[ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e][ 4093.900318] sriov_numvfs_store+0x214/0x290[ 4093.900320] ? sriov_totalvfs_show+0x30/0x30[ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10[ 4093.900323] ? __check_object_size+0x15a/0x350[ 4093.900326] kernfs_fop_write+0x280/0x3f0[ 4093.900329] vfs_write+0x145/0x440[ 4093.900330] ksys_write+0xab/0x160[ 4093.900332] ? __ia32_sys_read+0xb0/0xb0[ 4093.900334] ? fput_many+0x1a/0x120[ 4093.900335] ? filp_close+0xf0/0x130[ 4093.900338] do_syscall_64+0xa0/0x370[ 4093.900339] ? page_fault+0x8/0x30[ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca[ 4093.900357] RIP: 0033:0x7f16ad4d22c0[ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24[ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001[ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0[ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001[ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700[ 4093.9003---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fprobe: Release rethook after the ftrace_ops is unregisteredWhile running bpf selftests it's possible to get following fault: general protection fault, probably for non-canonical address \ 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... Call Trace: fprobe_handler+0xc1/0x270 ? __pfx_bpf_testmod_init+0x10/0x10 ? __pfx_bpf_testmod_init+0x10/0x10 ? bpf_fentry_test1+0x5/0x10 ? bpf_fentry_test1+0x5/0x10 ? bpf_testmod_init+0x22/0x80 ? do_one_initcall+0x63/0x2e0 ? rcu_is_watching+0xd/0x40 ? kmalloc_trace+0xaf/0xc0 ? do_init_module+0x60/0x250 ? __do_sys_finit_module+0xac/0x120 ? do_syscall_64+0x37/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc In unregister_fprobe function we can't release fp->rethook while it'spossible there are some of its users still running on another cpu.Moving rethook_free call after fp->ops is unregistered withunregister_ftrace_function call.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic()pr_info() is called with rtp->cbs_gbl_lock spin lock locked. Becausepr_info() calls printk() that might sleep, this will result in BUGlike below:[ 0.206455] cblist_init_generic: Setting adjustable number of callback queues.[ 0.206463][ 0.206464] =============================[ 0.206464] [ BUG: Invalid wait context ][ 0.206465] 5.19.0-00428-g9de1f9c8ca51 #5 Not tainted[ 0.206466] -----------------------------[ 0.206466] swapper/0/1 is trying to lock:[ 0.206467] ffffffffa0167a58 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x327/0x4a0[ 0.206473] other info that might help us debug this:[ 0.206473] context-{5:5}[ 0.206474] 3 locks held by swapper/0/1:[ 0.206474] #0: ffffffff9eb597e0 (rcu_tasks.cbs_gbl_lock){....}-{2:2}, at: cblist_init_generic.constprop.0+0x14/0x1f0[ 0.206478] #1: ffffffff9eb579c0 (console_lock){+.+.}-{0:0}, at: _printk+0x63/0x7e[ 0.206482] #2: ffffffff9ea77780 (console_owner){....}-{0:0}, at: console_emit_next_record.constprop.0+0x111/0x330[ 0.206485] stack backtrace:[ 0.206486] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-00428-g9de1f9c8ca51 #5[ 0.206488] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014[ 0.206489] Call Trace:[ 0.206490] [ 0.206491] dump_stack_lvl+0x6a/0x9f[ 0.206493] __lock_acquire.cold+0x2d7/0x2fe[ 0.206496] ? stack_trace_save+0x46/0x70[ 0.206497] lock_acquire+0xd1/0x2f0[ 0.206499] ? serial8250_console_write+0x327/0x4a0[ 0.206500] ? __lock_acquire+0x5c7/0x2720[ 0.206502] _raw_spin_lock_irqsave+0x3d/0x90[ 0.206504] ? serial8250_console_write+0x327/0x4a0[ 0.206506] serial8250_console_write+0x327/0x4a0[ 0.206508] console_emit_next_record.constprop.0+0x180/0x330[ 0.206511] console_unlock+0xf7/0x1f0[ 0.206512] vprintk_emit+0xf7/0x330[ 0.206514] _printk+0x63/0x7e[ 0.206516] cblist_init_generic.constprop.0.cold+0x24/0x32[ 0.206518] rcu_init_tasks_generic+0x5/0xd9[ 0.206522] kernel_init_freeable+0x15b/0x2a2[ 0.206523] ? rest_init+0x160/0x160[ 0.206526] kernel_init+0x11/0x120[ 0.206527] ret_from_fork+0x1f/0x30[ 0.206530] [ 0.207018] cblist_init_generic: Setting shift to 1 and lim to 1.This patch moves pr_info() so that it is called withoutrtp->cbs_gbl_lock locked.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ip_vti: fix potential slab-use-after-free in decode_session6When ip_vti device is set to the qdisc of the sfb type, the cb fieldof the sent skb may be modified during enqueuing. Then,slab-use-after-free may occur when ip_vti device sends IPv6 packets.As commit f855691975bb ("xfrm6: Fix the nexthdr offset in_decode_session6.") showed, xfrm_decode_session was originally intendedonly for the receive path. IP6CB(skb)->nhoff is not set duringtransmission. Therefore, set the cb field in the skb to 0 beforesending packets.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing/histograms: Add histograms to hist_vars if they have referenced variablesHist triggers can have referenced variables without having directvariables fields. This can be the case if referenced variables are addedfor trigger actions. In this case the newly added references will nothave field variables. Not taking such referenced variables intoconsideration can result in a bug where it would be possible to removehist trigger with variables being refenced. This will result in a bugthat is easily reproducable like so$ cd /sys/kernel/tracing$ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events$ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger$ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger$ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger[ 100.263533] ==================================================================[ 100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180[ 100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439[ 100.266320][ 100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4[ 100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014[ 100.268561] Call Trace:[ 100.268902] [ 100.269189] dump_stack_lvl+0x4c/0x70[ 100.269680] print_report+0xc5/0x600[ 100.270165] ? resolve_var_refs+0xc7/0x180[ 100.270697] ? kasan_complete_mode_report_info+0x80/0x1f0[ 100.271389] ? resolve_var_refs+0xc7/0x180[ 100.271913] kasan_report+0xbd/0x100[ 100.272380] ? resolve_var_refs+0xc7/0x180[ 100.272920] __asan_load8+0x71/0xa0[ 100.273377] resolve_var_refs+0xc7/0x180[ 100.273888] event_hist_trigger+0x749/0x860[ 100.274505] ? kasan_save_stack+0x2a/0x50[ 100.275024] ? kasan_set_track+0x29/0x40[ 100.275536] ? __pfx_event_hist_trigger+0x10/0x10[ 100.276138] ? ksys_write+0xd1/0x170[ 100.276607] ? do_syscall_64+0x3c/0x90[ 100.277099] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8[ 100.277771] ? destroy_hist_data+0x446/0x470[ 100.278324] ? event_hist_trigger_parse+0xa6c/0x3860[ 100.278962] ? __pfx_event_hist_trigger_parse+0x10/0x10[ 100.279627] ? __kasan_check_write+0x18/0x20[ 100.280177] ? mutex_unlock+0x85/0xd0[ 100.280660] ? __pfx_mutex_unlock+0x10/0x10[ 100.281200] ? kfree+0x7b/0x120[ 100.281619] ? ____kasan_slab_free+0x15d/0x1d0[ 100.282197] ? event_trigger_write+0xac/0x100[ 100.282764] ? __kasan_slab_free+0x16/0x20[ 100.283293] ? __kmem_cache_free+0x153/0x2f0[ 100.283844] ? sched_mm_cid_remote_clear+0xb1/0x250[ 100.284550] ? __pfx_sched_mm_cid_remote_clear+0x10/0x10[ 100.285221] ? event_trigger_write+0xbc/0x100[ 100.285781] ? __kasan_check_read+0x15/0x20[ 100.286321] ? __bitmap_weight+0x66/0xa0[ 100.286833] ? _find_next_bit+0x46/0xe0[ 100.287334] ? task_mm_cid_work+0x37f/0x450[ 100.287872] event_triggers_call+0x84/0x150[ 100.288408] trace_event_buffer_commit+0x339/0x430[ 100.289073] ? ring_buffer_event_data+0x3f/0x60[ 100.292189] trace_event_raw_event_sys_enter+0x8b/0xe0[ 100.295434] syscall_trace_enter.constprop.0+0x18f/0x1b0[ 100.298653] syscall_enter_from_user_mode+0x32/0x40[ 100.301808] do_syscall_64+0x1a/0x90[ 100.304748] entry_SYSCALL_64_after_hwframe+0x6e/0xd8[ 100.307775] RIP: 0033:0x7f686c75c1cb[ 100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48[ 100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021[ 100.321200] RA---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: amd-pstate-ut: Fix kernel panic when loading the driverAfter loading the amd-pstate-ut driver, amd_pstate_ut_check_perf()and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policyof the CPU and mark it as busy.In these functions, cpufreq_cpu_put() should be used to release thepolicy, but it is not, so any other entity trying to access the policyis blocked indefinitely.One such scenario is when amd_pstate mode is changed, leading to thefollowing splat:[ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds.[ 1332.110001] Not tainted 6.5.0-rc2-amd-pstate-ut #5[ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.[ 1332.123140] task:bash state:D stack:0 pid:2929 ppid:2873 flags:0x00004006[ 1332.123143] Call Trace:[ 1332.123145] [ 1332.123148] __schedule+0x3c1/0x16a0[ 1332.123154] ? _raw_read_lock_irqsave+0x2d/0x70[ 1332.123157] schedule+0x6f/0x110[ 1332.123160] schedule_timeout+0x14f/0x160[ 1332.123162] ? preempt_count_add+0x86/0xd0[ 1332.123165] __wait_for_common+0x92/0x190[ 1332.123168] ? __pfx_schedule_timeout+0x10/0x10[ 1332.123170] wait_for_completion+0x28/0x30[ 1332.123173] cpufreq_policy_put_kobj+0x4d/0x90[ 1332.123177] cpufreq_policy_free+0x157/0x1d0[ 1332.123178] ? preempt_count_add+0x58/0xd0[ 1332.123180] cpufreq_remove_dev+0xb6/0x100[ 1332.123182] subsys_interface_unregister+0x114/0x120[ 1332.123185] ? preempt_count_add+0x58/0xd0[ 1332.123187] ? __pfx_amd_pstate_change_driver_mode+0x10/0x10[ 1332.123190] cpufreq_unregister_driver+0x3b/0xd0[ 1332.123192] amd_pstate_change_driver_mode+0x1e/0x50[ 1332.123194] store_status+0xe9/0x180[ 1332.123197] dev_attr_store+0x1b/0x30[ 1332.123199] sysfs_kf_write+0x42/0x50[ 1332.123202] kernfs_fop_write_iter+0x143/0x1d0[ 1332.123204] vfs_write+0x2df/0x400[ 1332.123208] ksys_write+0x6b/0xf0[ 1332.123210] __x64_sys_write+0x1d/0x30[ 1332.123213] do_syscall_64+0x60/0x90[ 1332.123216] ? fpregs_assert_state_consistent+0x2e/0x50[ 1332.123219] ? exit_to_user_mode_prepare+0x49/0x1a0[ 1332.123223] ? irqentry_exit_to_user_mode+0xd/0x20[ 1332.123225] ? irqentry_exit+0x3f/0x50[ 1332.123226] ? exc_page_fault+0x8e/0x190[ 1332.123228] entry_SYSCALL_64_after_hwframe+0x6e/0xd8[ 1332.123232] RIP: 0033:0x7fa74c514a37[ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001[ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37[ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001[ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff[ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008[ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00[ 1332.123247] Fix this by calling cpufreq_cpu_put() wherever necessary.[ rjw: Subject and changelog edits ]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:s390/zcrypt: don't leak memory if dev_set_name() failsWhen dev_set_name() fails, zcdn_create() doesn't free the newlyallocated resources. Do it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count thenumber of MBSSID elements in the nested netlink attribute attrs, which canlead to an integer overflow if a user of the nl80211 interface specifies256 or more elements in the corresponding attribute in userspace. Theinteger overflow can lead to a heap buffer overflow as num_elems determinesthe size of the trailing array in elems, and this array is thereafterwritten to for each element in attrs.Note that this vulnerability only affects devices with thewiphy->mbssid_max_interfaces member set for the wireless physical devicestruct in the device driver, and can only be triggered by a process withCAP_NET_ADMIN capabilities.Fix this by checking for a maximum of 255 elements in attrs.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: imx: scu: use _safe list iterator to avoid a use after freeThis loop is freeing "clk" so it needs to use list_for_each_entry_safe().Otherwise it dereferences a freed variable to get the next item on theloop.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, cpumap: Make sure kthread is running before map update returnsThe following warning was reported when running stress-mode enabledxdp_redirect_cpu with some RT threads: ------------[ cut here ]------------ WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135 CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: events cpu_map_kthread_stop RIP: 0010:put_cpu_map_entry+0xda/0x220 ...... Call Trace: ? show_regs+0x65/0x70 ? __warn+0xa5/0x240 ...... ? put_cpu_map_entry+0xda/0x220 cpu_map_kthread_stop+0x41/0x60 process_one_work+0x6b0/0xb80 worker_thread+0x96/0x720 kthread+0x1a5/0x1f0 ret_from_fork+0x3a/0x70 ret_from_fork_asm+0x1b/0x30 The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memoryleak in cpu_map_update_elem"). The kthread is stopped prematurely bykthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't callcpu_map_kthread_run() at all but XDP program has already queued someframes or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checksthe ptr_ring, it will find it was not emptied and report a warning.An alternative fix is to use __cpu_map_ring_cleanup() to drop thesepending frames or skbs when kthread_stop() returns -EINTR, but it mayconfuse the user, because these frames or skbs have been handledcorrectly by XDP program. So instead of dropping these frames or skbs,just make sure the per-cpu kthread is running before__cpu_map_entry_alloc() returns.After apply the fix, the error handle for kthread_stop() will beunnecessary because it will always return 0, so just remove it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:gpio: mvebu: fix irq domain leakUwe Kleine-K?nig pointed out we still have one resource leak in the mvebudriver triggered on driver detach. Let's address it with a custom devmaction.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:USB: Gadget: core: Help prevent panic during UVC unconfigureAvichal Rakesh reported a kernel panic that occurred when the UVCgadget driver was removed from a gadget's configuration. The panicinvolves a somewhat complicated interaction between the kernel driverand a userspace component (as described in the Link tag below), butthe analysis did make one thing clear: The Gadget core shouldaccomodate gadget drivers calling usb_gadget_deactivate() as part oftheir unbind procedure.Currently this doesn't work. gadget_unbind_driver() callsdriver->unbind() while holding the udc->connect_lock mutex, andusb_gadget_deactivate() attempts to acquire that mutex, which willresult in a deadlock.The simple fix is for gadget_unbind_driver() to release the mutex wheninvoking the ->unbind() callback. There is no particular reason forit to be holding the mutex at that time, and the mutex isn't heldwhile the ->bind() callback is invoked. So we'll drop the mutexbefore performing the unbind callback and reacquire it afterward.We'll also add a couple of comments to usb_gadget_activate() andusb_gadget_deactivate(). Because they run in process context theymust not be called from a gadget driver's ->disconnect() callback,which (according to the kerneldoc for struct usb_gadget_driver ininclude/linux/usb/gadget.h) may run in interrupt context. This mayhelp prevent similar bugs from arising in the future.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: Release folio lock on fscache read hit.Under the current code, when cifs_readpage_worker is called, the callcontract is that the callee should unlock the page. This is documentedin the read_folio section of Documentation/filesystems/vfs.rst as:> The filesystem should unlock the folio once the read has completed,> whether it was successful or not.Without this change, when fscache is in use and cache hit occurs duringa read, the page lock is leaked, producing the following stack onsubsequent reads (via mmap) to the page:$ cat /proc/3890/task/12864/stack[<0>] folio_wait_bit_common+0x124/0x350[<0>] filemap_read_folio+0xad/0xf0[<0>] filemap_fault+0x8b1/0xab0[<0>] __do_fault+0x39/0x150[<0>] do_fault+0x25c/0x3e0[<0>] __handle_mm_fault+0x6ca/0xc70[<0>] handle_mm_fault+0xe9/0x350[<0>] do_user_addr_fault+0x225/0x6c0[<0>] exc_page_fault+0x84/0x1b0[<0>] asm_exc_page_fault+0x27/0x30This requires a reboot to resolve; it is a deadlock.Note however that the call to cifs_readpage_from_fscache does mark thepage clean, but does not free the folio lock. This happens in__cifs_readpage_from_fscache on success. Releasing the lock at thatpoint however is not appropriate as cifs_readahead also callscifs_readpage_from_fscache and *does* unconditionally release the lockafter its return. This change therefore effectively makescifs_readpage_worker work like cifs_readahead.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drivers: base: Free devm resources when unregistering a deviceIn the current code, devres_release_all() only gets called if the devicehas a bus and has been probed.This leads to issues when using bus-less or driver-less devices wherethe device might never get freed if a managed resource holds a referenceto the device. This is happening in the DRM framework for example.We should thus call devres_release_all() in the device_del() function tomake sure that the device-managed actions are properly executed when thedevice is unregistered, even if it has neither a bus nor a driver.This is effectively the same change than commit 2f8d16a996da ("devres:release resources on device_del()") that got reverted by commita525a3ddeaca ("driver core: free devres in device_release") overmemory leaks concerns.This patch effectively combines the two commits mentioned above torelease the resources both on device_del() and device_release() and getthe best of both worlds.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: fix mid leak during reconnection after timeout thresholdWhen the number of responses with status of STATUS_IO_TIMEOUTexceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnectthe connection. But we do not return the mid, or the creditsreturned for the mid, or reduce the number of in-flight requests.This bug could result in the server->in_flight count to go bad,and also cause a leak in the mids.This change moves the check to a few lines below where theresponse is decrypted, even of the response is read from thetransform header. This way, the code for returning the midscan be reused.Also, the cifs_reconnect was reconnecting just the transportconnection before. In case of multi-channel, this may not bewhat we want to do after several timeouts. Changed that toreconnect the session and the tree too.Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate nameMAX_STATUS_IO_TIMEOUT.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - Fix missing initialisation affecting gcm-aes-s390Fix af_alg_alloc_areq() to initialise areq->first_rsgl.sgl.sgt.sgl to pointto the scatterlist array in areq->first_rsgl.sgl.sgl.Without this, the gcm-aes-s390 driver will oops when it tries to dogcm_walk_start() on req->dst because req->dst is set to the value ofareq->first_rsgl.sgl.sgl by _aead_recvmsg() callingaead_request_set_crypt().The problem comes if an empty ciphertext is passed: the loop inaf_alg_get_rsgl() just passes straight out and doesn't set areq->first_rsglup.This isn't a problem on x86_64 using gcmaes_crypt_by_sg() because, as faras I can tell, that ignores req->dst and only uses req->src[*].[*] Is this a bug in aesni-intel_glue.c?The s390x oops looks something like: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000a00000000 TEID: 0000000a00000803 Fault in home space mode while using kernel ASCE. AS:00000000a43a0007 R3:0000000000000024 Oops: 003b ilc:2 [#1] SMP ... Call Trace: [<000003ff7fc3d47e>] gcm_walk_start+0x16/0x28 [aes_s390] [<00000000a2a342f2>] crypto_aead_decrypt+0x9a/0xb8 [<00000000a2a60888>] aead_recvmsg+0x478/0x698 [<00000000a2e519a0>] sock_recvmsg+0x70/0xb0 [<00000000a2e51a56>] sock_read_iter+0x76/0xa0 [<00000000a273e066>] vfs_read+0x26e/0x2a8 [<00000000a273e8c4>] ksys_read+0xbc/0x100 [<00000000a311d808>] __do_syscall+0x1d0/0x1f8 [<00000000a312ff30>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003ff7fc3e6b4>] gcm_aes_crypt+0x104/0xa68 [aes_s390]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tunnels: fix kasan splat when generating ipv4 pmtu errorIf we try to emit an icmp error in response to a nonliner skb, we getBUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220Read of size 4 at addr ffff88811c50db00 by task iperf3/1691CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309[..] kasan_report+0x105/0x140 ip_compute_csum+0x134/0x220 iptunnel_pmtud_build_icmp+0x554/0x1020 skb_tunnel_check_pmtu+0x513/0xb80 vxlan_xmit_one+0x139e/0x2ef0 vxlan_xmit+0x1867/0x2760 dev_hard_start_xmit+0x1ee/0x4f0 br_dev_queue_push_xmit+0x4d1/0x660 [..]ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.After this change, splat is gone and iperf3 is no longer stuck.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bonding: do not assume skb mac_header is setDrivers must not assume in their ndo_start_xmit() thatskbs have their mac_header set. skb->data is all what is needed.bonding seems to be one of the last offender as caught by syzbot:WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 skb_mac_offset include/linux/skbuff.h:2913 [inline]WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 __bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470Modules linked in:CPU: 1 PID: 12155 Comm: syz-executor.3 Not tainted 6.1.30-syzkaller #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023RIP: 0010:skb_mac_header include/linux/skbuff.h:2907 [inline]RIP: 0010:skb_mac_offset include/linux/skbuff.h:2913 [inline]RIP: 0010:bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline]RIP: 0010:bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline]RIP: 0010:bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline]RIP: 0010:__bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline]RIP: 0010:bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470Code: 8b 7c 24 30 e8 76 dd 1a 01 48 85 c0 74 0d 48 89 c3 e8 29 67 2e fe e9 15 ef ff ff e8 1f 67 2e fe e9 10 ef ff ff e8 15 67 2e fe <0f> 0b e9 45 f8 ff ff e8 09 67 2e fe e9 dc fa ff ff e8 ff 66 2e feRSP: 0018:ffffc90002fff6e0 EFLAGS: 00010283RAX: ffffffff835874db RBX: 000000000000ffff RCX: 0000000000040000RDX: ffffc90004dcf000 RSI: 00000000000000b5 RDI: 00000000000000b6RBP: ffffc90002fff8b8 R08: ffffffff83586d16 R09: ffffffff83586584R10: 0000000000000007 R11: ffff8881599fc780 R12: ffff88811b6a7b7eR13: 1ffff110236d4f6f R14: ffff88811b6a7ac0 R15: 1ffff110236d4f76FS: 00007f2e9eb47700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000001b2e421000 CR3: 000000010e6d4000 CR4: 00000000003526e0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace:[] netdev_start_xmit include/linux/netdevice.h:4925 [inline][] __dev_direct_xmit+0x4ef/0x850 net/core/dev.c:4380[] dev_direct_xmit include/linux/netdevice.h:3043 [inline][] packet_direct_xmit+0x18b/0x300 net/packet/af_packet.c:284[] packet_snd net/packet/af_packet.c:3112 [inline][] packet_sendmsg+0x4a22/0x64d0 net/packet/af_packet.c:3143[] sock_sendmsg_nosec net/socket.c:716 [inline][] sock_sendmsg net/socket.c:736 [inline][] __sys_sendto+0x472/0x5f0 net/socket.c:2139[] __do_sys_sendto net/socket.c:2151 [inline][] __se_sys_sendto net/socket.c:2147 [inline][] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147[] do_syscall_x64 arch/x86/entry/common.c:50 [inline][] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80[] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Avoid fcport pointer dereferenceKlocwork reported warning of NULL pointer may be dereferenced. The routineexits when sa_ctl is NULL and fcport is allocated after the exit call thuscausing NULL fcport pointer to dereference at the time of exit.To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi_si: fix a memleak in try_smi_init()Kmemleak reported the following leak info in try_smi_init():unreferenced object 0xffff00018ecf9400 (size 1024): comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s) backtrace: [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0 [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si] [<000000006460d325>] 0xffff800081b10148 [<0000000039206ea5>] do_one_initcall+0x64/0x2a4 [<00000000601399ce>] do_init_module+0x50/0x300 [<000000003c12ba3c>] load_module+0x7a8/0x9e0 [<00000000c246fffe>] __se_sys_init_module+0x104/0x180 [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30 [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250 [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0 [<000000005a05337f>] el0_svc+0x24/0x3c [<000000005eb248d6>] el0_sync_handler+0x160/0x164 [<0000000030a59039>] el0_sync+0x160/0x180The problem was that when an error occurred before handlers registrationand after allocating `new_smi->si_sm`, the variable wouldn't be freed inthe error handling afterwards since `shutdown_smi()` hadn't beenregistered yet. Fix it by adding a `kfree()` in the error handling pathin `try_smi_init()`.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:dax: Fix dax_mapping_release() use after freeA CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax regionprovider (like modprobe -r dax_hmem) yields: kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000) [..] DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260 [..] RIP: 0010:__lock_acquire+0x9fc/0x2260 [..] Call Trace: [..] lock_acquire+0xd4/0x2c0 ? ida_free+0x62/0x130 _raw_spin_lock_irqsave+0x47/0x70 ? ida_free+0x62/0x130 ida_free+0x62/0x130 dax_mapping_release+0x1f/0x30 device_release+0x36/0x90 kobject_delayed_cleanup+0x46/0x150Due to attempting ida_free() on an ida object that has already beenfreed. Devices typically only hold a reference on their parent whileregistered. If a child needs a parent object to complete its release itneeds to hold a reference that it drops from its release callback.Arrange for a dax_mapping to pin its parent dev_dax instance untildax_mapping_release().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Fix deletion race conditionSystem crash when using debug kernel due to link list corruption. The causeof the link list corruption is due to session deletion was allowed to queueup twice. Here's the internal trace that show the same port was allowed todouble queue for deletion on different cpu.20808683956 015 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 120808683957 027 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1Move the clearing/setting of deleted flag lock.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:soc: aspeed: socinfo: Add kfree for kstrdupAdd kfree() in the later error handling in order to avoid memory leak.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: reject invalid reloc tree root keys with stack dump[BUG]Syzbot reported a crash that an ASSERT() got triggered insideprepare_to_merge().That ASSERT() makes sure the reloc tree is properly pointed back by itssubvolume tree.[CAUSE]After more debugging output, it turns out we had an invalid reloc tree: BTRFS error (device loop1): reloc tree mismatch, root 8 has no reloc root, expect reloc root key (-8, 132, 8) gen 17Note the above root key is (TREE_RELOC_OBJECTID, ROOT_ITEM,QUOTA_TREE_OBJECTID), meaning it's a reloc tree for quota tree.But reloc trees can only exist for subvolumes, as for non-subvolumetrees, we just COW the involved tree block, no need to create a reloctree since those tree blocks won't be shared with other trees.Only subvolumes tree can share tree blocks with other trees (thus theyhave BTRFS_ROOT_SHAREABLE flag).Thus this new debug output proves my previous assumption that corruptedon-disk data can trigger that ASSERT().[FIX]Besides the dedicated fix and the graceful exit, also let tree-checker tocheck such root keys, to make sure reloc trees can only exist for subvolumes.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:memcontrol: ensure memcg acquired by id is properly set upIn the eviction recency check, we attempt to retrieve the memcg to whichthe folio belonged when it was evicted, by the memcg id stored in theshadow entry. However, there is a chance that the retrieved memcg is notthe original memcg that has been killed, but a new one which happens tohave the same id.This is a somewhat unfortunate, but acceptable and rare inaccuracy in theheuristics. However, if we retrieve this new memcg between its allocationand when it is properly attached to the memcg hierarchy, we could run intothe following NULL pointer exception during the memcg hierarchy traversaldone in mem_cgroup_get_nr_swap_pages():[ 155757.793456] BUG: kernel NULL pointer dereference, address: 00000000000000c0[ 155757.807568] #PF: supervisor read access in kernel mode[ 155757.818024] #PF: error_code(0x0000) - not-present page[ 155757.828482] PGD 401f77067 P4D 401f77067 PUD 401f76067 PMD 0[ 155757.839985] Oops: 0000 [#1] SMP[ 155757.887870] RIP: 0010:mem_cgroup_get_nr_swap_pages+0x3d/0xb0[ 155757.899377] Code: 29 19 4a 02 48 39 f9 74 63 48 8b 97 c0 00 00 00 48 8b b7 58 02 00 00 48 2b b7 c0 01 00 00 48 39 f0 48 0f 4d c6 48 39 d1 74 42 <48> 8b b2 c0 00 00 00 48 8b ba 58 02 00 00 48 2b ba c0 01 00 00 48[ 155757.937125] RSP: 0018:ffffc9002ecdfbc8 EFLAGS: 00010286[ 155757.947755] RAX: 00000000003a3b1c RBX: 000007ffffffffff RCX: ffff888280183000[ 155757.962202] RDX: 0000000000000000 RSI: 0007ffffffffffff RDI: ffff888bbc2d1000[ 155757.976648] RBP: 0000000000000001 R08: 000000000000000b R09: ffff888ad9cedba0[ 155757.991094] R10: ffffea0039c07900 R11: 0000000000000010 R12: ffff888b23a7b000[ 155758.005540] R13: 0000000000000000 R14: ffff888bbc2d1000 R15: 000007ffffc71354[ 155758.019991] FS: 00007f6234c68640(0000) GS:ffff88903f9c0000(0000) knlGS:0000000000000000[ 155758.036356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 155758.048023] CR2: 00000000000000c0 CR3: 0000000a83eb8004 CR4: 00000000007706e0[ 155758.062473] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[ 155758.076924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400[ 155758.091376] PKRU: 55555554[ 155758.096957] Call Trace:[ 155758.102016] [ 155758.106502] ? __die+0x78/0xc0[ 155758.112793] ? page_fault_oops+0x286/0x380[ 155758.121175] ? exc_page_fault+0x5d/0x110[ 155758.129209] ? asm_exc_page_fault+0x22/0x30[ 155758.137763] ? mem_cgroup_get_nr_swap_pages+0x3d/0xb0[ 155758.148060] workingset_test_recent+0xda/0x1b0[ 155758.157133] workingset_refault+0xca/0x1e0[ 155758.165508] filemap_add_folio+0x4d/0x70[ 155758.173538] page_cache_ra_unbounded+0xed/0x190[ 155758.182919] page_cache_sync_ra+0xd6/0x1e0[ 155758.191738] filemap_read+0x68d/0xdf0[ 155758.199495] ? mlx5e_napi_poll+0x123/0x940[ 155758.207981] ? __napi_schedule+0x55/0x90[ 155758.216095] __x64_sys_pread64+0x1d6/0x2c0[ 155758.224601] do_syscall_64+0x3d/0x80[ 155758.232058] entry_SYSCALL_64_after_hwframe+0x46/0xb0[ 155758.242473] RIP: 0033:0x7f62c29153b5[ 155758.249938] Code: e8 48 89 75 f0 89 7d f8 48 89 4d e0 e8 b4 e6 f7 ff 41 89 c0 4c 8b 55 e0 48 8b 55 e8 48 8b 75 f0 8b 7d f8 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 e7 e6 f7 ff 48 8b[ 155758.288005] RSP: 002b:00007f6234c5ffd0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011[ 155758.303474] RAX: ffffffffffffffda RBX: 00007f628c4e70c0 RCX: 00007f62c29153b5[ 155758.318075] RDX: 000000000003c041 RSI: 00007f61d2986000 RDI: 0000000000000076[ 155758.332678] RBP: 00007f6234c5fff0 R08: 0000000000000000 R09: 0000000064d5230c[ 155758.347452] R10: 000000000027d450 R11: 0000000000000293 R12: 000000000003c041[ 155758.362044] R13: 00007f61d2986000 R14: 00007f629e11b060 R15: 000000000027d450[ 155758.376661] This patch fixes the issue by moving the memcg's id publication from thealloc stage to ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:platform/x86: dell-sysman: Fix reference leakIf a duplicate attribute is found using kset_find_obj(),a reference to that attribute is returned. This meansthat we need to dispose it accordingly. Use kobject_put()to dispose the duplicate attribute in such a case.Compile-tested only.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()Hold RTNL lock when calling xdp_set_features() with a registered netdev,as the call triggers the netdev notifiers. This could happen whenswitching from uplink rep to nic profile for example.This resolves the following call trace:RTNL: assertion failed at net/core/dev.c (1953)WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ecRSP: 0018:ffff8882a21c3948 EFLAGS: 00010282RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: ? __warn+0x79/0x120 ? call_netdevice_notifiers_info+0x7c/0x80 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? call_netdevice_notifiers_info+0x7c/0x80 ? call_netdevice_notifiers_info+0x7c/0x80 call_netdevice_notifiers+0x2e/0x50 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core] mlx5e_nic_init+0xf1/0x1a0 [mlx5_core] mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core] mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core] mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core] __esw_offloads_unload_rep+0x52/0x60 [mlx5_core] mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core] esw_offloads_unload_rep+0x34/0x70 [mlx5_core] esw_offloads_disable+0x2b/0x90 [mlx5_core] mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core] mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core] ? devlink_get_from_attrs_lock+0x9e/0x110 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit.isra.0+0xc2/0x110 genl_rcv_msg+0x17d/0x2b0 ? devlink_get_from_attrs_lock+0x110/0x110 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290 ? devlink_pernet_pre_exit+0xf0/0xf0 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x232/0x4a0 sock_sendmsg+0x38/0x60 ? _copy_from_user+0x2a/0x60 __sys_sendto+0x110/0x160 ? __count_memcg_events+0x48/0x90 ? handle_mm_fault+0x161/0x260 ? do_user_addr_fault+0x278/0x6e0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0RIP: 0033---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:octeon_ep: cancel queued works in probe error pathIf it fails to get the devices's MAC address, octep_probe exits whileleaving the delayed work intr_poll_task queued. When the work laterruns, it's a use after free.Move the cancelation of intr_poll_task from octep_remove intooctep_device_cleanup. This does not change anything in the octep_removeflow, but octep_device_cleanup is called also in the octep_probe errorpath, where the cancelation is needed.Note that the cancelation of ctrl_mbox_task has to followintr_poll_task's, because the ctrl_mbox_task may be queued byintr_poll_task.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Make bpf_refcount_acquire fallible for non-owning refsThis patch fixes an incorrect assumption made in the originalbpf_refcount series [0], specifically that the BPF program callingbpf_refcount_acquire on some node can always guarantee that the node isalive. In that series, the patch adding failure behavior to rbtree_addand list_push_{front, back} breaks this assumption for non-owningreferences.Consider the following program: n = bpf_kptr_xchg(&mapval, NULL); /* skip error checking */ bpf_spin_lock(&l); if(bpf_rbtree_add(&t, &n->rb, less)) { bpf_refcount_acquire(n); /* Failed to add, do something else with the node */ } bpf_spin_unlock(&l);It's incorrect to assume that bpf_refcount_acquire will always succeed in thisscenario. bpf_refcount_acquire is being called in a critical sectionhere, but the lock being held is associated with rbtree t, which isn'tnecessarily the lock associated with the tree that the node is alreadyin. So after bpf_rbtree_add fails to add the node and calls bpf_obj_dropin it, the program has no ownership of the node's lifetime. Thereforethe node's refcount can be decr'd to 0 at any time after the failingrbtree_add. If this happens before the refcount_acquire above, the nodemight be free'd, and regardless refcount_acquire will be incrementing a0 refcount.Later patches in the series exercise this scenario, resulting in theexpected complaint from the kernel (without this patch's changes): refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 207 at lib/refcount.c:25 refcount_warn_saturate+0xbc/0x110 Modules linked in: bpf_testmod(O) CPU: 1 PID: 207 Comm: test_progs Tainted: G O 6.3.0-rc7-02231-g723de1a718a2-dirty #371 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0xbc/0x110 Code: 6f 64 f6 02 01 e8 84 a3 5c ff 0f 0b eb 9d 80 3d 5e 64 f6 02 00 75 94 48 c7 c7 e0 13 d2 82 c6 05 4e 64 f6 02 01 e8 64 a3 5c ff <0f> 0b e9 7a ff ff ff 80 3d 38 64 f6 02 00 0f 85 6d ff ff ff 48 c7 RSP: 0018:ffff88810b9179b0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000202 RSI: 0000000000000008 RDI: ffffffff857c3680 RBP: ffff88810027d3c0 R08: ffffffff8125f2a4 R09: ffff88810b9176e7 R10: ffffed1021722edc R11: 746e756f63666572 R12: ffff88810027d388 R13: ffff88810027d3c0 R14: ffffc900005fe030 R15: ffffc900005fe048 FS: 00007fee0584a700(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005634a96f6c58 CR3: 0000000108ce9002 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: bpf_refcount_acquire_impl+0xb5/0xc0 (rest of output snipped)The patch addresses this by changing bpf_refcount_acquire_impl to userefcount_inc_not_zero instead of refcount_inc and markingbpf_refcount_acquire KF_RET_NULL.For owning references, though, we know the above scenario is not possibleand thus that bpf_refcount_acquire will always succeed. Some verifierbookkeeping is added to track "is input owning ref?" for bpf_refcount_acquirecalls and return false from is_kfunc_ret_null for bpf_refcount_acquire onowning refs despite it being marked KF_RET_NULL.Existing selftests using bpf_refcount_acquire are modified wherenecessary to NULL-check its return value. [0]: https://lore.kernel.org/bpf/20230415201811.343116-1-davemarchevsky@fb.com/
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/i915/perf: add sentinel to xehp_oa_b_countersArrays passed to reg_in_range_table should end with empty record.The patch solves KASAN detected bug with signature:BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]Read of size 4 at addr ffffffffa1555d90 by task perf/1518CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023Call Trace:...xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915](cherry picked from commit 2f42c5afb34b5696cf5fe79e744f99be9b218798)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Drivers: hv: vmbus: Don't dereference ACPI root object handleSince the commit referenced in the Fixes: tag below the VMBus client driveris walking the ACPI namespace up from the VMBus ACPI device to the ACPInamespace root object trying to find Hyper-V MMIO ranges.However, if it is not able to find them it ends trying to walk resources ofthe ACPI namespace root object itself.This object has all-ones handle, which causes a NULL pointer dereferencein the ACPI code (from dereferencing this pointer with an offset).This in turn causes an oops on boot with VMBus host implementations that donot provide Hyper-V MMIO ranges in their VMBus ACPI device or itsancestors.The QEMU VMBus implementation is an example of such implementation.I guess providing these ranges is optional, since all tested Windowsversions seem to be able to use VMBus devices without them.Fix this by explicitly terminating the lookup at the ACPI namespace rootobject.Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interfaceby default - they only do so if the KVM PV interface is missing ordisabled.Example stack trace of such oops:[ 3.710827] ? __die+0x1f/0x60[ 3.715030] ? page_fault_oops+0x159/0x460[ 3.716008] ? exc_page_fault+0x73/0x170[ 3.716959] ? asm_exc_page_fault+0x22/0x30[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0[ 3.723559] ? down_timeout+0x3a/0x60[ 3.724455] ? acpi_ns_get_node+0x3a/0x60[ 3.725412] acpi_ns_get_node+0x3a/0x60[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0[ 3.728400] acpi_rs_get_method_data+0x2b/0x70[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus][ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus][ 3.732411] acpi_walk_resources+0x78/0xd0[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus][ 3.734802] platform_probe+0x3d/0x90[ 3.735684] really_probe+0x19b/0x400[ 3.736570] ? __device_attach_driver+0x100/0x100[ 3.737697] __driver_probe_device+0x78/0x160[ 3.738746] driver_probe_device+0x1f/0x90[ 3.739743] __driver_attach+0xc2/0x1b0[ 3.740671] bus_for_each_dev+0x70/0xc0[ 3.741601] bus_add_driver+0x10e/0x210[ 3.742527] driver_register+0x55/0xf0[ 3.744412] ? 0xffffffffc039a000[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixersmatch error:sound/pci/ac97/ac97_codec.c:2354 snd_ac97_mixer() error:we previously assumed 'rac97' could be null (see line 2072)remove redundant assignment, return error if rac97 is NULL.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vdpa: Add features attr to vdpa_nl_policy for nlattr length checkThe vdpa_nl_policy structure is used to validate the nlattr when parsingthe incoming nlmsg. It will ensure the attribute being described producesa valid nlattr pointer in info->attrs before entering into each handlerin vdpa_nl_ops.That is to say, the missing part in vdpa_nl_policy may lead to illegalnlattr after parsing, which could lead to OOB read just like CVE-2023-3773.This patch adds the missing nla_policy for vdpa features attr to avoidsuch bugs.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: amphion: fix REVERSE_INULL issues reported by coveritynull-checking of a pointor is suggested before dereferencing it
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ice: Don't tx before switchdev is fully configuredThere is possibility that ice_eswitch_port_start_xmit might becalled while some resources are still not allocated which mightcause NULL pointer dereference. Fix this by checking if switchdevconfiguration was finished.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:spi: bcm-qspi: return error if neither hif_mspi nor mspi is availableIf neither a "hif_mspi" nor "mspi" resource is present, the driver willjust early exit in probe but still return success. Apart from not doinganything meaningful, this would then also lead to a null pointer accesson removal, as platform_get_drvdata() would return NULL, which it wouldthen try to dereference when trying to unregister the spi master.Fix this by unconditionally calling devm_ioremap_resource(), as it canhandle a NULL res and will then return a viable ERR_PTR() if we get one.The "return 0;" was previously a "goto qspi_resource_err;" where thenret was returned, but since ret was still initialized to 0 at this placethis was a valid conversion in 63c5395bb7a9 ("spi: bcm-qspi: Fixuse-after-free on unbind"). The issue was not introduced by this commit,only made more obvious.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf, cpumap: Handle skb as well when clean up ptr_ringThe following warning was reported when running xdp_redirect_cpu withboth skb-mode and stress-mode enabled: ------------[ cut here ]------------ Incorrect XDP memory type (-2128176192) usage WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405 Modules linked in: CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: events __cpu_map_entry_free RIP: 0010:__xdp_return+0x1e4/0x4a0 ...... Call Trace: ? show_regs+0x65/0x70 ? __warn+0xa5/0x240 ? __xdp_return+0x1e4/0x4a0 ...... xdp_return_frame+0x4d/0x150 __cpu_map_entry_free+0xf9/0x230 process_one_work+0x6b0/0xb80 worker_thread+0x96/0x720 kthread+0x1a5/0x1f0 ret_from_fork+0x3a/0x70 ret_from_fork_asm+0x1b/0x30 The reason for the warning is twofold. One is due to the kthreadcpu_map_kthread_run() is stopped prematurely. Another one is__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs inptr_ring as XDP frames.Prematurely-stopped kthread will be fixed by the preceding patch andptr_ring will be empty when __cpu_map_ring_cleanup() is called. Butas the comments in __cpu_map_ring_cleanup() said, handling and freeingskbs in ptr_ring as well to "catch any broken behaviour gracefully".
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: codecs: wcd938x: fix missing mbhc init error handlingMBHC initialisation can fail so add the missing error handling to avoiddereferencing an error pointer when later configuring the jack: Unable to handle kernel paging request at virtual address fffffffffffffff8 pc : wcd_mbhc_start+0x28/0x380 [snd_soc_wcd_mbhc] lr : wcd938x_codec_set_jack+0x28/0x48 [snd_soc_wcd938x] Call trace: wcd_mbhc_start+0x28/0x380 [snd_soc_wcd_mbhc] wcd938x_codec_set_jack+0x28/0x48 [snd_soc_wcd938x] snd_soc_component_set_jack+0x28/0x8c [snd_soc_core] qcom_snd_wcd_jack_setup+0x7c/0x19c [snd_soc_qcom_common] sc8280xp_snd_init+0x20/0x2c [snd_soc_sc8280xp] snd_soc_link_init+0x28/0x90 [snd_soc_core] snd_soc_bind_card+0x628/0xbfc [snd_soc_core] snd_soc_register_card+0xec/0x104 [snd_soc_core] devm_snd_soc_register_card+0x4c/0xa4 [snd_soc_core] sc8280xp_platform_probe+0xf0/0x108 [snd_soc_sc8280xp]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: output extra debug info if we failed to find an inline backref[BUG]Syzbot reported several warning triggered insidelookup_inline_extent_backref().[CAUSE]As usual, the reproducer doesn't reliably trigger locally here, but atleast we know the WARN_ON() is triggered when an inline backref can notbe found, and it can only be triggered when @insert is true. (I.e.inserting a new inline backref, which means the backref should alreadyexist)[ENHANCEMENT]After the WARN_ON(), dump all the parameters and the extent treeleaf to help debug.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/handshake: fix null-ptr-deref in handshake_nl_done_doit()We should not call trace_handshake_cmd_done_err() if socket lookup has failed.Also we should call trace_handshake_cmd_done_err() before releasing the file,otherwise dereferencing sock->sk can return garbage.This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable")Unable to handle kernel paging request at virtual address dfff800000000003KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]Mem abort info:ESR = 0x0000000096000005EC = 0x25: DABT (current EL), IL = 32 bitsSET = 0, FnV = 0EA = 0, S1PTW = 0FSC = 0x05: level 1 translation faultData abort info:ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000CM = 0, WnR = 0, TnD = 0, TagAccess = 0GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[dfff800000000003] address between user and kernel address rangesInternal error: Oops: 0000000096000005 [#1] PREEMPT SMPModules linked in:CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193lr : handshake_nl_done_doit+0x180/0x9c8sp : ffff800096e37180x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000Call trace:handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline]genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline]genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914sock_sendmsg_nosec net/socket.c:725 [inline]sock_sendmsg net/socket.c:748 [inline]____sys_sendmsg+0x56c/0x840 net/socket.c:2494___sys_sendmsg net/socket.c:2548 [inline]__sys_sendmsg+0x26c/0x33c net/socket.c:2577__do_sys_sendmsg net/socket.c:2586 [inline]__se_sys_sendmsg net/socket.c:2584 [inline]__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:USB: gadget: Fix the memory leak in raw_gadget driverCurrently, increasing raw_dev->count happens before invoke theraw_queue_event(), if the raw_queue_event() return error, invokeraw_release() will not trigger the dev_free() to be called.[ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event[ 268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12[ 268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12[ 268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy[ 268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16BUG: memory leak[] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076[] kmalloc include/linux/slab.h:582 [inline][] kzalloc include/linux/slab.h:703 [inline][] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline][] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385[] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165[] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076[] kmalloc include/linux/slab.h:582 [inline][] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460[] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250[] vfs_ioctl fs/ioctl.c:51 [inline][] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076[] kmalloc include/linux/slab.h:582 [inline][] kzalloc include/linux/slab.h:703 [inline][] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665[] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196[] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292This commit therefore invoke kref_get() under the condition thatraw_queue_event() return success.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdgpu: Fix integer overflow in amdgpu_cs_pass1The type of size is unsigned int, if size is 0x40000000, there willbe an integer overflow, size will be zero after size *= sizeof(uint32_t),will cause uninitialized memory to be referenced later.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:arm64: csum: Fix OoB access in IP checksum code for negative lengthsAlthough commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-lengthcalls") added an early return for zero-length input, syzkaller haspopped up with an example of a _negative_ length which causes anundefined shift and an out-of-bounds read: | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975 | | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 | Call trace: | dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233 | show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240 | __dump_stack lib/dump_stack.c:88 [inline] | dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 | print_address_description mm/kasan/report.c:351 [inline] | print_report+0x174/0x514 mm/kasan/report.c:462 | kasan_report+0xd4/0x130 mm/kasan/report.c:572 | kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187 | __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31 | do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | csum_partial+0x30/0x58 lib/checksum.c:128 | gso_make_checksum include/linux/skbuff.h:4928 [inline] | __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332 | udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47 | ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119 | skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141 | __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401 | skb_gso_segment include/linux/netdevice.h:4859 [inline] | validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659 | validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709 | sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327 | __dev_xmit_skb net/core/dev.c:3805 [inline] | __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210 | dev_queue_xmit include/linux/netdevice.h:3085 [inline] | packet_xmit+0x6c/0x318 net/packet/af_packet.c:276 | packet_snd net/packet/af_packet.c:3081 [inline] | packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113 | sock_sendmsg_nosec net/socket.c:724 [inline] | sock_sendmsg net/socket.c:747 [inline] | __sys_sendto+0x3b4/0x538 net/socket.c:2144Extend the early return to reject negative lengths as well, aligning ourimplementation with the generic code in lib/checksum.c
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: fq_pie: avoid stalls in fq_pie_timer()When setting a high number of flows (limit being 65536),fq_pie_timer() is currently using too much time as syzbot reported.Add logic to yield the cpu every 2048 flows (less than 150 usecon debug kernels).It should also help by not blocking qdisc fast paths for too long.Worst case (65536 flows) would need 31 jiffies for a complete scan.Relevant extract from syzbot report:rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/.rcu: blocking rcu_node structures (internal RCU debug):Sending NMI from CPU 1 to CPUs 0:NMI backtrace for cpu 0CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00
00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8bRSP: 0018:ffffc90000007bb8 EFLAGS: 00000206RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000FS: 0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415 fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui()During NVMeTCP Authentication a controller can trigger a kerneloops by specifying the 8192 bit Diffie Hellman group and passinga correctly sized, but zeroed Diffie Hellamn value.mpi_cmp_ui() was detecting this if the second parameter was 0,but 1 is passed from dh_is_pubkey_valid(). This causes the nullpointer u->d to be dereferenced towards the end of mpi_cmp_ui()
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: ocb: don't leave if not joinedIf there's no OCB state, don't ask the driver/mac80211 toleave, since that's just confusing. Since set/clear thechandef state, that's a simple check.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:blk-cgroup: hold queue_lock when removing blkg->q_nodeWhen blkg is removed from q->blkg_list from blkg_free_workfn(), queue_lockhas to be held, otherwise, all kinds of bugs(list corruption, hard lockup,..) can be triggered from blkg_destroy_all().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix memory leak of iter->temp when reading trace_pipekmemleak reports: unreferenced object 0xffff88814d14e200 (size 256): comm "cat", pid 336, jiffies 4294871818 (age 779.490s) hex dump (first 32 bytes): 04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00 ................ 0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff .........Z...... backtrace: [] __kmalloc+0x4f/0x140 [] trace_find_next_entry+0xbb/0x1d0 [] trace_print_lat_context+0xaf/0x4e0 [] print_trace_line+0x3e0/0x950 [] tracing_read_pipe+0x2d9/0x5a0 [] vfs_read+0x143/0x520 [] ksys_read+0xbd/0x160 [] do_syscall_64+0x3f/0x90 [] entry_SYSCALL_64_after_hwframe+0x6e/0xd8when reading file 'trace_pipe', 'iter->temp' is allocated or relocatedin trace_find_next_entry() but not freed before 'trace_pipe' is closed.To fix it, free 'iter->temp' in tracing_release_pipe().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:x86/hyperv: Disable IBT when hypercall page lacks ENDBR instructionOn hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMswith ConfigVersion 9.3 or later support IBT in the guest. However,current versions of Hyper-V have a bug in that there's not an ENDBR64instruction at the beginning of the hypercall page. Since hypercalls aremade with an indirect call to the hypercall page, all hypercall attemptsfail with an exception and Linux panics.A Hyper-V fix is in progress to add ENDBR64. But guard against the Linuxpanic by clearing X86_FEATURE_IBT if the hypercall page doesn't startwith ENDBR. The VM will boot and run without IBT.If future Linux 32-bit kernels were to support IBT, additional hypercallpage hackery would be needed to make IBT work for such kernels in aHyper-V VM.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:virtiofs: use pages instead of pointer for kernel direct IOWhen trying to insert a 10MB kernel module kept in a virtio-fs with cachedisabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... ---[ end trace 0000000000000000 ]---The warning is triggered as follows:1) syscall finit_module() handles the module insertion and it invokeskernel_read_file() to read the content of the module first.2) kernel_read_file() allocates a 10MB buffer by using vmalloc() andpasses it to kernel_read(). kernel_read() constructs a kvec iter byusing iov_iter_kvec() and passes it to fuse_file_read_iter().3) virtio-fs disables the cache, so fuse_file_read_iter() invokesfuse_direct_io(). As for now, the maximal read size for kvec iter isonly limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, sofuse_direct_io() doesn't split the 10MB buffer. It saves the address andthe size of the 10MB-sized buffer in out_args[0] of a fuse request andpasses the fuse request to virtio_fs_wake_pending_and_unlock().4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() toqueue the request. Because virtiofs need DMA-able address, sovirtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer forall fuse args, copies these args into the bounce buffer and passed thephysical address of the bounce buffer to virtiofsd. The total length ofthese fuse args for the passed fuse request is about 10MB, socopy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter andit triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL;5) virtio_fs_enqueue_req() will retry the memory allocation in akworker, but it won't help, because kmalloc() will always return NULLdue to the abnormal size and finit_module() will hang forever.A feasible solution is to limit the value of max_read for virtio-fs, sothe length passed to kmalloc() will be limited. However it will affectthe maximal read size for normal read. And for virtio-fs write initiatedfrom kernel, it has the similar problem but now there is no way to limitfc->max_write in kernel.So instead of limiting both the values of max_read and max_write inkernel, introducing use_pages_for_kvec_io in fuse_conn and setting it astrue in virtiofs. When use_pages_for_kvec_io is enabled, fuse will usepages instead of pointer to pass the KVEC_IO data.After switching to pages for KVEC_IO data, these pages will be used forDMA through virtio-fs. If these pages are backed by vmalloc(),{flush|invalidate}_kernel_vmap_range() are necessary to flush orinvalidate the cache before the DMA operation. So add two new fields infuse_args_pages to record the base address of vmalloc area and thecondition indicating whether invalidation is needed. Perform the flushin fuse_get_user_pages() for write operations and the invalidation infuse_release_user_pages() for read operations.It may seem necessary to introduce another fie---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_core: Disable works on hci_unregister_devThis make use of disable_work_* on hci_unregister_dev since the hci_dev isabout to be freed new submissions are not disarable.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A use-after-free vulnerability was found in libxslt while parsing xsl nodes that may lead to the dereference of expired pointers and application crash.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libxslt1 < 1.1.34-150400.3.13.1 (version in image is 1.1.34-150400.3.6.1).
-
Description: A flaw was discovered in libvirt in the XML file processing. More specifically, the parsing of user provided XML files was performed before the ACL checks. A malicious user with limited permissions could exploit this flaw by submitting a specially crafted XML file, causing libvirt to allocate too much memory on the host. The excessive memory consumption could lead to a libvirt process crash on the host, resulting in a denial-of-service condition.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libvirt-libs > 0-0 (version in image is 11.0.0-150700.4.7.1).
-
Description: A flaw was found in libvirt. External inactive snapshots for shut-down VMs are incorrectly created as world-readable, making it possible for unprivileged users to inspect the guest OS contents. This results in an information disclosure vulnerability.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libvirt-libs > 0-0 (version in image is 11.0.0-150700.4.7.1).
-
Description: Calling wordexp with WRDE_REUSE in conjunction with WRDE_APPEND in the GNU C Library version 2.0 to version 2.42 may cause the interface to return uninitialized memory in the we_wordv member, which on subsequent calls to wordfree may abort the process.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glibc > 0-0 (version in image is 2.38-150600.14.37.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tcp: correct handling of extreme memory squeezeTesting with iperf3 using the "pasta" protocol splicer has revealeda problem in the way tcp handles window advertising in extreme memorysqueeze situations.Under memory pressure, a socket endpoint may temporarily advertisea zero-sized window, but this is not stored as part of the socket data.The reasoning behind this is that it is considered a temporary settingwhich shouldn't influence any further calculations.However, if we happen to stall at an unfortunate value of the currentwindow size, the algorithm selecting a new value will consistently failto advertise a non-zero window once we have freed up enough memory.This means that this side's notion of the current window size isdifferent from the one last advertised to the peer, causing the latterto not send any data to resolve the sitution.The problem occurs on the iperf3 server side, and the socket in questionis a completely regular socket with the default settings for thefedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.The following excerpt of a logging session, with own comments added,shows more in detail what is happening:// tcp_v4_rcv(->)// tcp_rcv_established(->)[5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ====[5201<->39222]: tcp_data_queue(->)[5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0] [OFO queue: gap: 65480, len: 0][5201<->39222]: tcp_data_queue(<-)[5201<->39222]: __tcp_transmit_skb(->) [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160][5201<->39222]: tcp_select_window(->)[5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160] returning 0[5201<->39222]: tcp_select_window(<-)[5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160[5201<->39222]: [__tcp_transmit_skb(<-)[5201<->39222]: tcp_rcv_established(<-)[5201<->39222]: tcp_v4_rcv(<-)// Receive queue is at 85 buffers and we are out of memory.// We drop the incoming buffer, although it is in sequence, and decide// to send an advertisement with a window of zero.// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means// we unconditionally shrink the window.[5201<->39222]: tcp_recvmsg_locked(->)[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160[5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368][5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0][5201<->39222]: NOT calling tcp_send_ack() [tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160][5201<->39222]: __tcp_cleanup_rbuf(<-) [rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184] [copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0] returning 6104 bytes[5201<->39222]: tcp_recvmsg_locked(<-)// After each read, the algorithm for calculating the new receive// window in __tcp_cleanup_rbuf() finds it is too small to advertise// or to update tp->rcv_wnd.// Meanwhile, the peer thinks the window is zero, and will not send// any more data to trigger an update from the interrupt mode side.[5201<->39222]: tcp_recvmsg_locked(->)[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_n---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetimeAfter commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into structmd_bitmap_stats"), following panic is reported:Oops: general protection fault, probably for non-canonical addressRIP: 0010:bitmap_get_stats+0x2b/0xa0Call Trace: md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7eRoot cause is that bitmap_get_stats() can be called at anytime if mddevis still there, even if bitmap is destroyed, or not fully initialized.Deferenceing bitmap in this case can crash the kernel. Meanwhile, theabove commit start to deferencing bitmap->storage, make the problemeasier to trigger.Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommu: Clear iommu-dma ops on cleanupIf iommu_device_register() encounters an error, it can end up tearingdown already-configured groups and default domains, however thiscurrently still leaves devices hooked up to iommu-dma (and evenhistorically the behaviour in this area was at best inconsistent acrossarchitectures/drivers...) Although in the case that an IOMMU is presentwhose driver has failed to probe, users cannot necessarily expect DMA towork anyway, it's still arguable that we should do our best to putthings back as if the IOMMU driver was never there at all, and certainlythe potential for crashing in iommu-dma itself is undesirable. Make surewe clean up the dev->dma_iommu flag along with everything else.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:perf/core: Fix WARN_ON(!ctx) in __free_event() for partial initMove the get_ctx(child_ctx) call and the child_event->ctx assignment tooccur immediately after the child event is allocated. Ensure thatchild_event->ctx is non-NULL before any subsequent error path withininherit_event calls free_event(), satisfying the assumptions of thecleanup code.Details:There's no clear Fixes tag, because this bug is a side-effect ofmultiple interacting commits over time (up to 15 years old), nota single regression.The code initially incremented refcount then assigned contextimmediately after the child_event was created. Later, an earlyvalidity check for child_event was added before therefcount/assignment. Even later, a WARN_ON_ONCE() cleanup check wasadded, assuming event->ctx is valid if the pmu_ctx is valid.The problem is that the WARN_ON_ONCE() could trigger after the initialcheck passed but before child_event->ctx was assigned, violating itsprecondition. The solution is to assign child_event->ctx right afterits initial validation. This ensures the context exists for anysubsequent checks or cleanup routines, resolving the WARN_ON_ONCE().To resolve it, defer the refcount update and child_event->ctx assignmentdirectly after child_event->pmu_ctx is set but before checking if theparent event is orphaned. The cleanup routine depends onevent->pmu_ctx being non-NULL before it verifies event->ctx isnon-NULL. This also maintains the author's original intent of passingin child_ctx to find_get_pmu_context before its refcount/assignment.[ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: ufs: exynos: Disable iocc if dma-coherent property isn't setIf dma-coherent property isn't set then descriptors are non-cacheableand the iocc shareability bits should be disabled. Without this UFS canend up in an incompatible configuration and suffer from random cacherelated stability issues.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/xe/vf: Perform early GT MMIO initialization to read GMDIDVFs need to communicate with the GuC to obtain the GMDID valueand existing GuC functions used for that assume that the GT hasit's MMIO members already setup. However, due to recent refactoringthe gt->mmio is initialized later, and any attempt by the VF to usexe_mmio_read|write() from GuC functions will lead to NPD crash dueto unset MMIO register address:[] xe 0000:00:02.1: [drm] Running in SR-IOV VF mode[] xe 0000:00:02.1: [drm] GT0: sending H2G MMIO 0x5507[] BUG: unable to handle page fault for address: 0000000000190240Since we are already tweaking the id and type of the primary GT tomimic it's a Media GT before initializing the GuC communication,we can also call xe_gt_mmio_init() to perform early setup of thegt->mmio which will make those GuC functions work again.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:s390/mm: Fix in_atomic() handling in do_secure_storage_access()Kernel user spaces accesses to not exported pages in atomic contextincorrectly try to resolve the page fault.With debug options enabled call traces like this can be seen:BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39preempt_count: 1, expected: 0RCU nest depth: 0, expected: 0INFO: lockdep is turned off.Preemption disabled at:[<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPTTainted: [W]=WARNHardware name: IBM 3931 A01 703 (LPAR)Call Trace: [<00000383e990d282>] dump_stack_lvl+0xa2/0xe8 [<00000383e99bf152>] __might_resched+0x292/0x2d0 [<00000383eaa7c374>] down_read+0x34/0x2d0 [<00000383e99432f8>] do_secure_storage_access+0x108/0x360 [<00000383eaa724b0>] __do_pgm_check+0x130/0x220 [<00000383eaa842e4>] pgm_check_handler+0x114/0x160 [<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0) [<00000383e9c45eae>] generic_perform_write+0x16e/0x310 [<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160 [<00000383e9da0de4>] vfs_write+0x1c4/0x460 [<00000383e9da123c>] ksys_write+0x7c/0x100 [<00000383eaa7284e>] __do_syscall+0x15e/0x280 [<00000383eaa8417e>] system_call+0x6e/0x90INFO: lockdep is turned off.It is not allowed to take the mmap_lock while in atomic context. Thereforehandle such a secure storage access fault as if the accessed page is notmapped: the uaccess function will return -EFAULT, and the caller has todeal with this. Usually this means that the access is retried in processcontext, which allows to resolve the page fault (or in this case export thepage).
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netlink: Fix wraparounds of sk->sk_rmem_alloc.Netlink has this pattern in some places if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) atomic_add(skb->truesize, &sk->sk_rmem_alloc);, which has the same problem fixed by commit 5a465a0da13e ("udp:Fix multiple wraparounds of sk->sk_rmem_alloc.").For example, if we set INT_MAX to SO_RCVBUFFORCE, the conditionis always false as the two operands are of int.Then, a single socket can eat as many skb as possible until OOMhappens, and we can see multiple wraparounds of sk->sk_rmem_alloc.Let's fix it by using atomic_add_return() and comparing the twovariables as unsigned int.Before: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port -1668710080 0 rtnl:nl_wraparound/293 *After: [root@fedora ~]# ss -f netlink Recv-Q Send-Q Local Address:Port Peer Address:Port 2147483072 0 rtnl:nl_wraparound/290 * ^ `--- INT_MAX - 576
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: reject VHT opmode for unsupported channel widthsVHT operating mode notifications are not defined for channel widthsbelow 20 MHz. In particular, 5 MHz and 10 MHz are not valid under theVHT specification and must be rejected.Without this check, malformed notifications using these widths mayreach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due toinvalid input. This issue was reported by syzbot.Reject these unsupported widths early in sta_link_apply_parameters()when opmode_notif is used. The accepted set includes 20, 40, 80, 160,and 80+80 MHz, which are valid for VHT. While 320 MHz is not definedfor VHT, it is allowed to avoid rejecting HE or EHT clients that maystill send a VHT opmode notification.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xfrm: state: initialize state_ptrs earlier in xfrm_state_findIn case of preemption, xfrm_state_look_at will find a differentpcpu_id and look up states for that other CPU. If we matched a statefor CPU2 in the state_cache while the lookup started on CPU1, we willjump to "found", but the "best" state that we got will be ignored andwe will enter the "acquire" block. This block uses state_ptrs, whichisn't initialized at this point.Let's initialize state_ptrs just after taking rcu_read_lock. This willalso prevent a possible misuse in the future, if someone adjusts thisfunction.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: uvcvideo: Fix 1-byte out-of-bounds read in uvc_parse_format()The buffer length check before calling uvc_parse_format() only ensuredthat the buffer has at least 3 bytes (buflen > 2), buf the functionaccesses buffer[3], requiring at least 4 bytes.This can lead to an out-of-bounds read if the buffer has exactly 3 bytes.Fix it by checking that the buffer has at least 4 bytes inuvc_parse_format().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/ptdump: take the memory hotplug lock inside ptdump_walk_pgd()Memory hot remove unmaps and tears down various kernel page table regionsas required. The ptdump code can race with concurrent modifications ofthe kernel page tables. When leaf entries are modified concurrently, thedump code may log stale or inconsistent information for a VA range, butthis is otherwise not harmful.But when intermediate levels of kernel page table are freed, the dump codewill continue to use memory that has been freed and potentiallyreallocated for another purpose. In such cases, the ptdump code maydereference bogus addresses, leading to a number of potential problems.To avoid the above mentioned race condition, platforms such as arm64,riscv and s390 take memory hotplug lock, while dumping kernel page tablevia the sysfs interface /sys/kernel/debug/kernel_page_tables.Similar race condition exists while checking for pages that might havebeen marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pageswhich in turn calls ptdump_check_wx(). Instead of solving this racecondition again, let's just move the memory hotplug lock inside genericptdump_check_wx() which will benefit both the scenarios.Drop get_online_mems() and put_online_mems() combination from all existingplatform ptdump code paths.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hv_netvsc: Fix panic during namespace deletion with VFThe existing code move the VF NIC to new namespace when NETDEV_REGISTER isreceived on netvsc NIC. During deletion of the namespace,default_device_exit_batch() >> default_device_exit_net() is called. Whennetvsc NIC is moved back and registered to the default namespace, itautomatically brings VF NIC back to the default namespace. This will causethe default_device_exit_net() >> for_each_netdev_safe loop unable to detectthe list end, and hit NULL ptr:[ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0[ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010[ 231.450246] #PF: supervisor read access in kernel mode[ 231.450579] #PF: error_code(0x0000) - not-present page[ 231.450916] PGD 17b8a8067 P4D 0[ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI[ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY[ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024[ 231.452692] Workqueue: netns cleanup_net[ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0[ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00[ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246[ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb[ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564[ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000[ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340[ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340[ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000[ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0[ 231.458434] Call Trace:[ 231.458600] [ 231.458777] ops_undo_list+0x100/0x220[ 231.459015] cleanup_net+0x1b8/0x300[ 231.459285] process_one_work+0x184/0x340To fix it, move the ns change to a workqueue, and take rtnl_lock to avoidchanging the netdev list when default_device_exit_net() is using it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: fix race between polling and detachingsyzbot reports a use-after-free in comedi in the below link, which isdue to comedi gladly removing the allocated async area even though pollrequests are still active on the wait_queue_head inside of it. This cancause a use-after-free when the poll entries are later triggered orremoved, as the memory for the wait_queue_head has been freed. We needto check there are no tasks queued on any of the subdevices' wait queuesbefore allowing the device to be detached by the `COMEDI_DEVCONFIG`ioctl.Tasks will read-lock `dev->attach_lock` before adding themselves to thesubdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctlhandler by write-locking `dev->attach_lock` before checking that all ofthe subdevices are safe to be deleted. This includes testing for anysleepers on the subdevices' wait queues. It remains locked until thedevice has been detached. This requires the `comedi_device_detach()`function to be refactored slightly, moving the bulk of it into newfunction `comedi_device_detach_locked()`.Note that the refactor of `comedi_device_detach()` results in`comedi_device_cancel_all()` now being called while `dev->attach_lock`is write-locked, which wasn't the case previously, but that does notmatter.Thanks to Jens Axboe for diagnosing the problem and co-developing thispatch.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommufd: Prevent ALIGN() overflowWhen allocating IOVA the candidate range gets aligned to the targetalignment. If the range is close to ULONG_MAX then the ALIGN() canwrap resulting in a corrupted iova.Open code the ALIGN() using get_add_overflow() to prevent this.This simplifies the checks as we don't need to check for length earliereither.Consolidate the two copies of this code under a single helper.This bug would allow userspace to create a mapping that overlaps with someother mapping or a reserved range.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pNFS: Fix uninited ptr deref in block/scsi layoutThe error occurs on the third attempt to encode extents. When functionext_tree_prepare_commit() reallocates a larger buffer to retry encodingextents, the "layoutupdate_pages" page array is initialized only after theretry loop. But ext_tree_free_commitdata() is called on every iterationand tries to put pages in the array, thus dereferencing uninitializedpointers.An additional problem is that there is no limit on the maximum possiblebuffer_size. When there are too many extents, the client may create alayoutcommit that is larger than the maximum possible RPC size acceptedby the server.During testing, we observed two typical scenarios. First, one memory pagefor extents is enough when we work with small files, append data to theend of the file, or preallocate extents before writing. But when we filla new large file without preallocating, the number of extents can be huge,and counting the number of written extents in ext_tree_encode_commit()does not help much. Since this number increases even more betweenunlocking and locking of ext_tree, the reallocated buffer may not belarge enough again and again.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: dvb-frontends: w7090p: fix null-ptr-deref in w7090p_tuner_write_serpar and w7090p_tuner_read_serparIn w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We addcheck on msg[0].len to prevent crash.Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: dvb-frontends: dib7090p: fix null-ptr-deref in dib7090p_rw_on_apb()In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null andmsg[0].len is zero, former checks on msg[0].buf would be passed. If accessingmsg[0].buf[2] without sanity check, null pointer deref would happen. We addcheck on msg[0].len to prevent crash. Similar issue occurs when accessmsg[1].buf[0] and msg[1].buf[1].Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file()When the volume header contains erroneous values that do not reflectthe actual state of the filesystem, hfsplus_fill_super() assumes thatthe attributes file is not yet created, which later results in hittingBUG_ON() when hfsplus_create_attributes_file() is called. Replace thisBUG_ON() with -EIO error with a message to suggest running fsck tool.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfs: fix slab-out-of-bounds in hfs_bnode_read()This patch introduces is_bnode_offset_valid() method that checksthe requested offset value. Also, it introducescheck_and_correct_requested_length() method that checks andcorrect the requested length (if it is necessary). These methodsare used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(),hfs_bnode_copy(), and hfs_bnode_move() with the goal to preventthe access out of allocated memory and triggering the crash.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: kcm: Fix race condition in kcm_unattach()syzbot found a race condition when kcm_unattach(psock)and kcm_release(kcm) are executed at the same time.kcm_unattach() is missing a check of the flagkcm->tx_stopped before calling queue_work().If the kcm has a reserved psock, kcm_unattach() might get executedbetween cancel_work_sync() and unreserve_psock() in kcm_release(),requeuing kcm->tx_work right before kcm gets freed in kcm_done().Remove kcm->tx_stopped and replace it by the lesserror-prone disable_work_sync().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: linearize cloned gso packets in sctp_rcvA cloned head skb still shares these frag skbs in fraglist with theoriginal head skb. It's not safe to access these frag skbs.syzbot reported two use-of-uninitialized-memory bugs caused by this: BUG: KMSAN: uninit-value in sctp_inq_pop+0x15b7/0x1920 net/sctp/inqueue.c:211 sctp_inq_pop+0x15b7/0x1920 net/sctp/inqueue.c:211 sctp_assoc_bh_rcv+0x1a7/0xc50 net/sctp/associola.c:998 sctp_inq_push+0x2ef/0x380 net/sctp/inqueue.c:88 sctp_backlog_rcv+0x397/0xdb0 net/sctp/input.c:331 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1122 __release_sock+0x1da/0x330 net/core/sock.c:3106 release_sock+0x6b/0x250 net/core/sock.c:3660 sctp_wait_for_connect+0x487/0x820 net/sctp/socket.c:9360 sctp_sendmsg_to_asoc+0x1ec1/0x1f00 net/sctp/socket.c:1885 sctp_sendmsg+0x32b9/0x4a80 net/sctp/socket.c:2031 inet_sendmsg+0x25a/0x280 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:718 [inline]and BUG: KMSAN: uninit-value in sctp_assoc_bh_rcv+0x34e/0xbc0 net/sctp/associola.c:987 sctp_assoc_bh_rcv+0x34e/0xbc0 net/sctp/associola.c:987 sctp_inq_push+0x2a3/0x350 net/sctp/inqueue.c:88 sctp_backlog_rcv+0x3c7/0xda0 net/sctp/input.c:331 sk_backlog_rcv+0x142/0x420 include/net/sock.h:1148 __release_sock+0x1d3/0x330 net/core/sock.c:3213 release_sock+0x6b/0x270 net/core/sock.c:3767 sctp_wait_for_connect+0x458/0x820 net/sctp/socket.c:9367 sctp_sendmsg_to_asoc+0x223a/0x2260 net/sctp/socket.c:1886 sctp_sendmsg+0x3910/0x49f0 net/sctp/socket.c:2032 inet_sendmsg+0x269/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline]This patch fixes it by linearizing cloned gso packets in sctp_rcv().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:LoongArch: BPF: Fix jump offset calculation in tailcallThe extra pass of bpf_int_jit_compile() skips JIT context initializationwhich essentially skips offset calculation leaving out_offset = -1, sothe jmp_offset in emit_bpf_tail_call is calculated by"#define jmp_offset (out_offset - (cur_offset))"is a negative number, which is wrong. The final generated assembly areas follow.54: bgeu $a2, $t1, -8 # 0x0000004c58: addi.d $a6, $s5, -15c: bltz $a6, -16 # 0x0000004c60: alsl.d $t2, $a2, $a1, 0x364: ld.d $t2, $t2, 26468: beq $t2, $zero, -28 # 0x0000004cBefore apply this patch, the follow test case will reveal soft lock issues.cd tools/testing/selftests/bpf/./test_progs --allow=tailcalls/tailcall_bpf2bpf_1dmesg:watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm()Lei Lu recently reported that nfsd4_setclientid_confirm() did not checkthe return value from get_client_locked(). a SETCLIENTID_CONFIRM couldrace with a confirmed client expiring and fail to get a reference. Thatcould later lead to a UAF.Fix this by getting a reference early in the case where there is anextant confirmed client. If that fails then treat it as if there were noconfirmed client found at all.In the case where the unconfirmed client is expiring, just fail andreturn the result from get_client_locked().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: asix_devices: add phy_mask for ax88772 mdio busWithout setting phy_mask for ax88772 mdio bus, current driver may createat most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phydevice will bind to net phy driver. This is creating issue during systemsuspend/resume since phy_polling_mode() in phy_state_machine() willdirectly deference member of phydev->drv for non-main phy devices. ThenNULL pointer dereference issue will occur. Due to only external phy orinternal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoudthe issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netlink: avoid infinite retry looping in netlink_unicast()netlink_attachskb() checks for the socket's read memory allocationconstraints. Firstly, it has: rmem < READ_ONCE(sk->sk_rcvbuf)to check if the just increased rmem value fits into the socket's receivebuffer. If not, it proceeds and tries to wait for the memory under: rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc isequal to sk->sk_rcvbuf. Thus the function neither successfully acceptsthese conditions, nor manages to reschedule the task - and is called inretry loop for indefinite time which is caught as: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212 (t=26000 jiffies g=230833 q=259957) NMI backtrace for cpu 0 CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014 Call Trace: dump_stack lib/dump_stack.c:120 nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105 nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62 rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335 rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590 update_process_times kernel/time/timer.c:1953 tick_sched_handle kernel/time/tick-sched.c:227 tick_sched_timer kernel/time/tick-sched.c:1399 __hrtimer_run_queues kernel/time/hrtimer.c:1652 hrtimer_interrupt kernel/time/hrtimer.c:1717 __sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113 asm_call_irq_on_stack arch/x86/entry/entry_64.S:808 netlink_attachskb net/netlink/af_netlink.c:1234 netlink_unicast net/netlink/af_netlink.c:1349 kauditd_send_queue kernel/audit.c:776 kauditd_thread kernel/audit.c:897 kthread kernel/kthread.c:328 ret_from_fork arch/x86/entry/entry_64.S:304Restore the original behavior of the check which commit in Fixesaccidentally missed when restructuring the code.Found by Linux Verification Center (linuxtesting.org).
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smb3: fix for slab out of bounds on mount to ksmbdWith KASAN enabled, it is possible to get a slab out of boundsduring mount to ksmbd due to missing check in parse_server_interfaces()(see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Validate UAC3 power domain descriptors, tooUAC3 power domain descriptors need to be verified with its variablebLength for avoiding the unexpected OOB accesses by maliciousfirmware, too.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: fix UAF on smcsk after smc_listen_out()BPF CI testing report a UAF issue: [ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0 [ 16.447134] #PF: supervisor read access in kernel mod e [ 16.447516] #PF: error_code(0x0000) - not-present pag e [ 16.447878] PGD 0 P4D 0 [ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I [ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2 [ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E [ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4 [ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k [ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0 [ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6 [ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0 [ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0 [ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5 [ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0 [ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0 [ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0 [ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3 [ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0 [ 16.456459] PKRU: 5555555 4 [ 16.456654] Call Trace : [ 16.456832] [ 16.456989] ? __die+0x23/0x7 0 [ 16.457215] ? page_fault_oops+0x180/0x4c 0 [ 16.457508] ? __lock_acquire+0x3e6/0x249 0 [ 16.457801] ? exc_page_fault+0x68/0x20 0 [ 16.458080] ? asm_exc_page_fault+0x26/0x3 0 [ 16.458389] ? smc_listen_work+0xc02/0x159 0 [ 16.458689] ? smc_listen_work+0xc02/0x159 0 [ 16.458987] ? lock_is_held_type+0x8f/0x10 0 [ 16.459284] process_one_work+0x1ea/0x6d 0 [ 16.459570] worker_thread+0x1c3/0x38 0 [ 16.459839] ? __pfx_worker_thread+0x10/0x1 0 [ 16.460144] kthread+0xe0/0x11 0 [ 16.460372] ? __pfx_kthread+0x10/0x1 0 [ 16.460640] ret_from_fork+0x31/0x5 0 [ 16.460896] ? __pfx_kthread+0x10/0x1 0 [ 16.461166] ret_from_fork_asm+0x1a/0x3 0 [ 16.461453] [ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ] [ 16.462134] CR2: 000000000000003 0 [ 16.462380] ---[ end trace 0000000000000000 ]--- [ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590The direct cause of this issue is that after smc_listen_out_connected(),newclcsock->sk may be NULL since it will releases the smcsk. Therefore,if the application closes the socket immediately after accept,newclcsock->sk can be NULL. A possible execution order could be asfollows:smc_listen_work | userspace-----------------------------------------------------------------lock_sock(sk) |smc_listen_out_connected() || \- smc_listen_out || | \- release_sock | | |- sk->sk_data_ready() | | fd = accept(); | close(fd); | \- socket->sk = NULL;/* newclcsock->sk is NULL now */SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk))Since smc_listen_out_connected() will not fail, simply swapping the orderof the code can easily fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:gve: prevent ethtool ops after shutdownA crash can occur if an ethtool operation is invokedafter shutdown() is called.shutdown() is invoked during system shutdown to stop DMA operationswithout performing expensive deallocations. It is discouraged tounregister the netdev in this path, so the device may still be visibleto userspace and kernel helpers.In gve, shutdown() tears down most internal data structures. If anethtool operation is dispatched after shutdown(), it will dereferencefreed or NULL pointers, leading to a kernel panic. While gracefulshutdown normally quiesces userspace before invoking the rebootsyscall, forced shutdowns (as observed on GCP VMs) can still triggerthis path.Fix by calling netif_device_detach() in shutdown().This marks the device as detached so the ethtool ioctl handlerwill skip dispatching operations to the driver.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: asix_devices: Fix PHY address mask in MDIO bus initializationSyzbot reported shift-out-of-bounds exception on MDIO bus initialization.The PHY address should be masked to 5 bits (0-31). Without thismask, invalid PHY addresses could be used, potentially causing issueswith MDIO bus operations.Fix this by masking the PHY address with 0x1f (31 decimal) to ensureit stays within the valid range.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ppp: fix race conditions in ppp_fill_forward_pathppp_fill_forward_path() has two race conditions:1. The ppp->channels list can change between list_empty() and list_first_entry(), as ppp_lock() is not held. If the only channel is deleted in ppp_disconnect_channel(), list_first_entry() may access an empty head or a freed entry, and trigger a panic.2. pch->chan can be NULL. When ppp_unregister_channel() is called, pch->chan is set to NULL before pch is removed from ppp->channels.Fix these by using a lockless RCU approach:- Use list_first_or_null_rcu() to safely test and access the first list entry.- Convert list modifications on ppp->channels to their RCU variants and add synchronize_net() after removal.- Check for a NULL pch->chan before dereferencing it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session()The function mod_hdcp_hdcp1_create_session() calls the functionget_first_active_display(), but does not check its return value.The return value is a null pointer if the display list is empty.This will lead to a null pointer dereference.Add a null pointer check for get_first_active_display() and returnMOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.This is similar to the commit c3e9826a2202("drm/amd/display: Add null pointer check for get_first_active_display()").(cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla4xxx: Prevent a potential error pointer dereferenceThe qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,but qla4xxx_ep_connect() returns error pointers. Propagating the errorpointers will lead to an Oops in the caller, so change the error pointersto NULL.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/nouveau/nvif: Fix potential memory leak in nvif_vmm_ctor().When the nvif_vmm_type is invalid, we will return error directlywithout freeing the args in nvif_vmm_ctor(), which leading a memoryleak. Fix it by setting the ret -EINVAL and goto done.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Limit access to parser->buffer when trace_get_user failedWhen the length of the string written to set_ftrace_filter exceedsFTRACE_BUFF_MAX, the following KASAN alarm will be triggered:BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0Read of size 1 at addr ffff0000d00bd5ba by task ash/165CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirtyHardware name: linux,dummy-virt (DT)Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0The reason is that trace_get_user will fail when processing a stringlonger than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.Then an OOB access will be triggered in ftrace_regex_release->ftrace_process_regex->strsep->strpbrk. We can solve this problem bylimiting access to parser->buffer when trace_get_user failed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl()syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernelbuffer is allocated to hold `insn->n` samples (each of which is an`unsigned int`). For some instruction types, `insn->n` samples arecopied back to user-space, unless an error code is being returned. Theproblem is that not all the instruction handlers that need to returndata to userspace fill in the whole `insn->n` samples, so that there isan information leak. There is a similar syzbot report for`do_insnlist_ioctl()`, although it does not have a reproducer for it atthe time of writing.One culprit is `insn_rw_emulate_bits()` which is used as the handler for`INSN_READ` or `INSN_WRITE` instructions for subdevices that do not havea specific handler for that instruction, but do have an `INSN_BITS`handler. For `INSN_READ` it only fills in at most 1 sample, so if`insn->n` is greater than 1, the remaining `insn->n - 1` samples copiedto userspace will be uninitialized kernel data.Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. Itnever returns an error, even if it fails to fill the buffer.Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making surethat uninitialized parts of the allocated buffer are zeroed beforehandling each instruction.Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fixreplaced the call to `kmalloc_array()` with `kcalloc()`, but it is notalways necessary to clear the whole buffer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: pcl726: Prevent invalid irq numberThe reproducer passed in an irq number(0x80008000) that was too large,which triggered the oob.Added an interrupt number check to prevent users from passing in an irqnumber that was too large.If `it->options[1]` is 31, then `1 << it->options[1]` is still invalidbecause it shifts a 1-bit into the sign bit (which is UB in C).Possible solutions include reducing the upper bound on the`it->options[1]` value to 30 or lower, or using `1U << it->options[1]`.The old code would just not attempt to request the IRQ if the`options[1]` value were invalid. And it would still configure thedevice without interrupts even if the call to `request_irq` returned anerror. So it would be better to combine this test with the test below.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: Make insn_rw_emulate_bits() do insn->n samplesThe `insn_rw_emulate_bits()` function is used as a default handler for`INSN_READ` instructions for subdevices that have a handler for`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a defaulthandler for `INSN_WRITE` instructions for subdevices that have a handlerfor `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the`INSN_READ` or `INSN_WRITE` instruction handling with a constructed`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`instructions are supposed to be able read or write multiple samples,indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currentlyonly handles a single sample. For `INSN_READ`, the comedi core willcopy `insn->n` samples back to user-space. (That triggered KASANkernel-infoleak errors when `insn->n` was greater than 1, but that isbeing fixed more generally elsewhere in the comedi core.)Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or returnan error, to conform to the general expectation for `INSN_READ` and`INSN_WRITE` handlers.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iio: light: as73211: Ensure buffer holes are zeroedGiven that the buffer is copied to a kfifo that ultimately user spacecan read, ensure we zero it.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ftrace: Also allocate and copy hash for reading of filter filesCurrently the reader of set_ftrace_filter and set_ftrace_notrace just addsthe pointer to the global tracer hash to its iterator. Unlike the writerthat allocates a copy of the hash, the reader keeps the pointer to thefilter hashes. This is problematic because this pointer is static acrossfunction calls that release the locks that can update the global tracerhashes. This can cause UAF and similar bugs.Allocate and copy the hash for reading the filter files like it is donefor the writers. This not only fixes UAF bugs, but also makes the code abit simpler as it doesn't have to differentiate when to free theiterator's hash between writers and readers.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amd/display: Avoid a NULL pointer dereference[WHY]Although unlikely drm_atomic_get_new_connector_state() ordrm_atomic_get_old_connector_state() can return NULL.[HOW]Check returns before dereference.(cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:s390/sclp: Fix SCCB present checkTracing code called by the SCLP interrupt handler contains early exitsif the SCCB address associated with an interrupt is NULL. This check isperformed after physical to virtual address translation.If the kernel identity mapping does not start at address zero, theresulting virtual address is never zero, so that the NULL checks won'twork. Subsequently this may result in incorrect accesses to the firstpage of the identity mapping.Fix this by introducing a function that handles the NULL case beforeaddress translation.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFS: Fix a race when updating an existing writeAfter nfs_lock_and_join_requests() tests for whether the request isstill attached to the mapping, nothing prevents a call tonfs_inode_remove_request() from succeeding until we actually lock thepage group.The reason is that whoever called nfs_inode_remove_request() doesn'tnecessarily have a lock on the page group head.So in order to avoid races, let's take the page group lock earlier innfs_lock_and_join_requests(), and hold it across the removal of therequest in nfs_inode_remove_request().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ACPI: pfr_update: Fix the driver update version checkThe security-version-number check should be used ratherthan the runtime version check for driver updates.Otherwise, the firmware update would fail when the update binary hada lower runtime version number than the current one.[ rjw: Changelog edits ]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: sr: Fix MAC comparison to be constant-timeTo prevent timing attacks, MACs need to be compared in constant time.Use the appropriate helper function for this.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: venus: protect against spurious interrupts during probeMake sure the interrupt handler is initialized before the interrupt isregistered.If the IRQ is registered before hfi_create(), it's possible that aninterrupt fires before the handler setup is complete, leading to a NULLdereference.This error condition has been observed during system boot on Rb3Gen2.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: venus: Add a check for packet size after reading from shared memoryAdd a check to ensure that the packet size does not exceed the number ofavailable words after reading the packet header from shared memory. Thisensures that the size provided by the firmware is safe to process andprevent potential out-of-bounds memory access.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: rainshadow-cec: fix TOCTOU race condition in rain_interrupt()In the interrupt handler rain_interrupt(), the buffer full check onrain->buf_len is performed before acquiring rain->buf_lock. Thiscreates a Time-of-Check to Time-of-Use (TOCTOU) race condition, asrain->buf_len is concurrently accessed and modified in the workhandler rain_irq_work_handler() under the same lock.Multiple interrupt invocations can race, with each reading buf_lenbefore it becomes full and then proceeding. This can lead to bothinterrupts attempting to write to the buffer, incrementing buf_lenbeyond its capacity (DATA_SIZE) and causing a buffer overflow.Fix this bug by moving the spin_lock() to before the buffer fullcheck. This ensures that the check and the subsequent buffer modificationare performed atomically, preventing the race condition. An correspondingspin_unlock() is added to the overflow path to correctly release thelock.This possible bug was found by an experimental static analysis tooldeveloped by our team.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: usbtv: Lock resolution while streamingWhen an program is streaming (ffplay) and another program (qv4l2)changes the TV standard from NTSC to PAL, the kernel crashes due to tryingto copy to unmapped memory.Changing from NTSC to PAL increases the resolution in the usbtv struct,but the video plane buffer isn't adjusted, so it overflows.[hverkuil: call vb2_is_busy instead of vb2_is_streaming]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iio: imu: bno055: fix OOB access of hw_xlate arrayFix a potential out-of-bounds array access of the hw_xlate array inbno055.c.In bno055_get_regmask(), hw_xlate was iterated over the length of thevals array instead of the length of the hw_xlate array. In the case ofbno055_gyr_scale, the vals array is larger than the hw_xlate array,so this could result in an out-of-bounds access. In practice, thisshouldn't happen though because a match should always be found whichbreaks out of the for loop before it iterates beyond the end of thehw_xlate array.By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can besure we are iterating over the correct length.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: qat - flush misc workqueue during device shutdownRepeated loading and unloading of a device specific QAT driver, forexample qat_4xxx, in a tight loop can lead to a crash due to ause-after-free scenario. This occurs when a power management (PM)interrupt triggers just before the device-specific driver (e.g.,qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remainsloaded.Since the driver uses a shared workqueue (`qat_misc_wq`) across alldevices and owned by intel_qat.ko, a deferred routine from thedevice-specific driver may still be pending in the queue. If thisroutine executes after the driver is unloaded, it can dereference freedmemory, resulting in a page fault and kernel crash like the following: BUG: unable to handle page fault for address: ffa000002e50a01c #PF: supervisor read access in kernel mode RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat] Call Trace: pm_bh_handler+0x1d2/0x250 [intel_qat] process_one_work+0x171/0x340 worker_thread+0x277/0x3a0 kthread+0xf0/0x120 ret_from_fork+0x2d/0x50To prevent this, flush the misc workqueue during device shutdown toensure that all pending work items are completed before the driver isunloaded.Note: This approach may slightly increase shutdown latency if theworkqueue contains jobs from other devices, but it ensures correctnessand stability.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:serial: 8250: fix panic due to PSLVERRWhen the PSLVERR_RESP_EN parameter is set to 1, the device generatesan error response if an attempt is made to read an empty RBR (ReceiveBuffer Register) while the FIFO is enabled.In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokesdw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latterfunction enables the FIFO via serial_out(p, UART_FCR, p->fcr).Execution proceeds to the serial_port_in(port, UART_RX).This satisfies the PSLVERR trigger condition.When another CPU (e.g., using printk()) is accessing the UART (UARTis busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enterdw8250_force_idle().Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lockto fix this issue.Panic backtrace:[ 0.442336] Oops - unknown exception [#1][ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a[ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e...[ 0.442416] console_on_rootfs+0x26/0x70
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:s390/ism: fix concurrency management in ism_cmd()The s390x ISM device data sheet clearly states that only onerequest-response sequence is allowable per ISM function at any point intime. Unfortunately as of today the s390/ism driver in Linux does nothonor that requirement. This patch aims to rectify that.This problem was discovered based on Aliaksei's bug report which statesthat for certain workloads the ISM functions end up entering error state(with PEC 2 as seen from the logs) after a while and as a consequenceconnections handled by the respective function break, and for futureconnection requests the ISM device is not considered -- given it is in adysfunctional state. During further debugging PEC 3A was observed aswell.A kernel message like[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61ais a reliable indicator of the stated function entering error statewith PEC 2. Let me also point out that a kernel message like[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recoveryis a reliable indicator that the ISM function won't be auto-recoveredbecause the ISM driver currently lacks support for it.On a technical level, without this synchronization, commands (inputs tothe FW) may be partially or fully overwritten (corrupted) by another CPUtrying to issue commands on the same function. There is hard evidence thatthis can lead to DMB token values being used as DMB IOVAs, leading toPEC 2 PCI events indicating invalid DMA. But this is only one of thefailure modes imaginable. In theory even completely losing one commandand executing another one twice and then trying to interpret the outputsas if the command we intended to execute was actually executed and notthe other one is also possible. Frankly, I don't feel confident aboutproviding an exhaustive list of possible consequences.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()The function needs to check the minimal filehandle length before it canaccess the embedded filehandle.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask()ath11k_mac_disable_peer_fixed_rate() is passed as the iterator toieee80211_iterate_stations_atomic(). Note in this case the iterator isrequired to be atomic, however ath11k_mac_disable_peer_fixed_rate() doesnot follow it as it might sleep. Consequently below warning is seen:BUG: sleeping function called from invalid context at wmi.c:304Call Trace: dump_stack_lvl __might_resched.cold ath11k_wmi_cmd_send ath11k_wmi_set_peer_param ath11k_mac_disable_peer_fixed_rate ieee80211_iterate_stations_atomic ath11k_mac_op_set_bitrate_mask.coldChange to ieee80211_iterate_stations_mtx() to fix this issue.Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs: Prevent file descriptor table allocations exceeding INT_MAXWhen sysctl_nr_open is set to a very high value (for example, 1073741816as set by systemd), processes attempting to use file descriptors nearthe limit can trigger massive memory allocation attempts that exceedINT_MAX, resulting in a WARNING in mm/slub.c: WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288This happens because kvmalloc_array() and kvmalloc() check if therequested size exceeds INT_MAX and emit a warning when the allocation isnot flagged with __GFP_NOWARN.Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and aprocess calls dup2(oldfd, 1073741880), the kernel attempts to allocate:- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes- Multiple bitmaps: ~400MB- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)Reproducer:1. Set /proc/sys/fs/nr_open to 1073741816: # echo 1073741816 > /proc/sys/fs/nr_open2. Run a program that uses a high file descriptor: #include #include int main() { struct rlimit rlim = {1073741824, 1073741824}; setrlimit(RLIMIT_NOFILE, &rlim); dup2(2, 1073741880); // Triggers the warning return 0; }3. Observe WARNING in dmesg at mm/slub.c:5027systemd commit a8b627a introduced automatic bumping of fs.nr_open to themaximum possible value. The rationale was that systems with memorycontrol groups (memcg) no longer need separate file descriptor limitssince memory is properly accounted. However, this change overlookedthat:1. The kernel's allocation functions still enforce INT_MAX as a maximum size regardless of memcg accounting2. Programs and tests that legitimately test file descriptor limits can inadvertently trigger massive allocations3. The resulting allocations (>8GB) are impractical and will always failsystemd's algorithm starts with INT_MAX and keeps halving the valueuntil the kernel accepts it. On most systems, this results in nr_openbeing set to 1073741816 (0x3ffffff8), which is just under 1GB of filedescriptors.While processes rarely use file descriptors near this limit in normaloperation, certain selftests (liketools/testing/selftests/core/unshare_test.c) and programs that test filedescriptor limits can trigger this issue.Fix this by adding a check in alloc_fdtable() to ensure the requestedallocation size does not exceed INT_MAX. This causes the operation tofail with -EMFILE instead of triggering a kernel warning and avoids theimpractical >8GB memory allocation request.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: Validate UAC3 cluster segment descriptorsUAC3 class segment descriptors need to be verified whether their sizesmatch with the declared lengths and whether they fit with theallocated buffer sizes, too. Otherwise malicious firmware may lead tothe unexpected OOB accesses.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpagesEver since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"),we have been doing this:static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset, size_t size)[...] /* Calculate the number of bytes we need to push, for this page * specifically */ size_t bytes = min_t(size_t, PAGE_SIZE - offset, size); /* If we can't splice it, then copy it in, as normal */ if (!sendpage_ok(page[i])) msg.msg_flags &= ~MSG_SPLICE_PAGES; /* Set the bvec pointing to the page, with len $bytes */ bvec_set_page(&bvec, page[i], bytes, offset); /* Set the iter to $size, aka the size of the whole sendpages (!!!) */ iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size);try_page_again: lock_sock(sk); /* Sendmsg with $size size (!!!) */ rv = tcp_sendmsg_locked(sk, &msg, size);This means we've been sending oversized iov_iters and tcp_sendmsg callsfor a while. This has a been a benign bug because sendpage_ok() alwaysreturned true. With the recent slab allocator changes being slowlyintroduced into next (that disallow sendpage on large kmallocallocations), we have recently hit out-of-bounds crashes, due to slightdifferences in iov_iter behavior between the MSG_SPLICE_PAGES and"regular" copy paths:(MSG_SPLICE_PAGES)skb_splice_from_iter iov_iter_extract_pages iov_iter_extract_bvec_pages uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere skb_splice_from_iter gets a "short" read(!MSG_SPLICE_PAGES)skb_copy_to_page_nocache copy=iov_iter_count [...] copy_from_iter /* this doesn't help */ if (unlikely(iter->count < len)) len = iter->count; iterate_bvec ... and we run off the bvecsFix this by properly setting the iov_iter's byte count, plus sending thecorrect byte count to tcp_sendmsg_locked.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:LoongArch: Optimize module load time by optimizing PLT/GOT countingWhen enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD andCONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock,the relevant logs are as follows:rcu: INFO: rcu_sched self-detected stall on CPU...Call Trace:[<900000000024f9e4>] show_stack+0x5c/0x180[<90000000002482f4>] dump_stack_lvl+0x94/0xbc[<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280[<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88[<9000000000396c34>] update_process_times+0xb4/0x150[<90000000003b2474>] tick_nohz_handler+0xf4/0x250[<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428[<9000000000399b2c>] hrtimer_interrupt+0x214/0x538[<9000000000253634>] constant_timer_interrupt+0x64/0x80[<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0[<9000000000349a78>] handle_irq_event_percpu+0x18/0x88[<9000000000354c00>] handle_percpu_irq+0x90/0xf0[<9000000000348c74>] handle_irq_desc+0x94/0xb8[<9000000001012b28>] handle_cpu_irq+0x68/0xa0[<9000000001def8c0>] handle_loongarch_irq+0x30/0x48[<9000000001def958>] do_vint+0x80/0xd0[<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0[<90000000006344f4>] __asan_load8+0x4c/0x120[<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8[<90000000003895f0>] load_module+0x9e0/0x2958[<900000000038b770>] __do_sys_init_module+0x208/0x2d0[<9000000001df0c34>] do_syscall+0x94/0x190[<900000000024d6fc>] handle_syscall+0xbc/0x158After analysis, this is because the slow speed of loading the amdgpumodule leads to the long time occupation of the cpu and then the softdeadlock.When loading a module, module_frob_arch_sections() tries to figure outthe number of PLTs/GOTs that will be needed to handle all the RELAs. Itwill call the count_max_entries() to find in an out-of-order date whichcounting algorithm has O(n^2) complexity.To make it faster, we sort the relocation list by info and addend. Thatway, to check for a duplicate relocation, it just needs to compare withthe previous entry. This reduces the complexity of the algorithm to O(n log n), as done in commit d4e0340919fb ("arm64/module: Optimize moduleload time by optimizing PLT counting"). This gives sinificant reductionin module load time for modules with large number of relocations.After applying this patch, the soft deadlock problem has been solved,and the kernel starts normally without "Call Trace".Using the default configuration to test some modules, the results are asfollows:Module Sizeip_tables 36Kfat 143Kradeon 2.5MBamdgpu 16MBWithout this patch:Module Module load time (ms) Count(PLTs/GOTs)ip_tables 18 59/6fat 0 162/14radeon 54 1221/84amdgpu 1411 4525/1098With this patch:Module Module load time (ms) Count(PLTs/GOTs)ip_tables 18 59/6fat 0 162/14radeon 22 1221/84amdgpu 45 4525/1098
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/hisilicon/hibmc: fix the hibmc loaded failed bugWhen hibmc loaded failed, the driver use hibmc_unload to free theresource, but the mutexes in mode.config are not init, which willaccess an NULL pointer. Just change goto statement to return, becausehibnc_hw_init() doesn't need to free anything.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/mremap: fix WARN with uffd that has remap events disabledRegistering userfaultd on a VMA that spans at least one PMD and thenmremap()'ing that VMA can trigger a WARN when recovering from a failedpage table move due to a page table allocation error.The code ends up doing the right thing (recurse, avoiding moving actualpage tables), but triggering that WARN is unpleasant:WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_normal_pmd mm/mremap.c:357 [inline]WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_pgt_entry mm/mremap.c:595 [inline]WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_page_tables+0x3832/0x44a0 mm/mremap.c:852Modules linked in:CPU: 2 UID: 0 PID: 6133 Comm: syz.0.19 Not tainted 6.17.0-rc1-syzkaller-00004-g53e760d89498 #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014RIP: 0010:move_normal_pmd mm/mremap.c:357 [inline]RIP: 0010:move_pgt_entry mm/mremap.c:595 [inline]RIP: 0010:move_page_tables+0x3832/0x44a0 mm/mremap.c:852Code: ...RSP: 0018:ffffc900037a76d8 EFLAGS: 00010293RAX: 0000000000000000 RBX: 0000000032930007 RCX: ffffffff820c6645RDX: ffff88802e56a440 RSI: ffffffff820c7201 RDI: 0000000000000007RBP: ffff888037728fc0 R08: 0000000000000007 R09: 0000000000000000R10: 0000000032930007 R11: 0000000000000000 R12: 0000000000000000R13: ffffc900037a79a8 R14: 0000000000000001 R15: dffffc0000000000FS: 000055556316a500(0000) GS:ffff8880d68bc000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000001b30863fff CR3: 0000000050171000 CR4: 0000000000352ef0Call Trace: copy_vma_and_data+0x468/0x790 mm/mremap.c:1215 move_vma+0x548/0x1780 mm/mremap.c:1282 mremap_to+0x1b7/0x450 mm/mremap.c:1406 do_mremap+0xfad/0x1f80 mm/mremap.c:1921 __do_sys_mremap+0x119/0x170 mm/mremap.c:1977 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f00d0b8ebe9Code: ...RSP: 002b:00007ffe5ea5ee98 EFLAGS: 00000246 ORIG_RAX: 0000000000000019RAX: ffffffffffffffda RBX: 00007f00d0db5fa0 RCX: 00007f00d0b8ebe9RDX: 0000000000400000 RSI: 0000000000c00000 RDI: 0000200000000000RBP: 00007ffe5ea5eef0 R08: 0000200000c00000 R09: 0000000000000000R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000002R13: 00007f00d0db5fa0 R14: 00007f00d0db5fa0 R15: 0000000000000005 The underlying issue is that we recurse during the original page tablemove, but not during the recovery move.Fix it by checking for both VMAs and performing the check before thepmd_none() sanity check.Add a new helper where we perform+document that check for the PMD and PUDlevel.Thanks to Harry for bisecting.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/debug_vm_pgtable: clear page table entries at destroy_args()The mm/debug_vm_pagetable test allocates manually page table entries forthe tests it runs, using also its manually allocated mm_struct. That initself is ok, but when it exits, at destroy_args() it fails to clear thoseentries with the *_clear functions.The problem is that leaves stale entries. If another process allocates anmm_struct with a pgd at the same address, it may end up running into thestale entry. This is happening in practice on a debug kernel withCONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extradebugging I added (it prints a warning trace if pgtables_bytes goesnegative, in addition to the warning at check_mm() function):[ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000[ 2.539366] kmem_cache info[ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508[ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e(...)[ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0[ 2.552816] Modules linked in:[ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY[ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries[ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90[ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug)[ 2.552899] MSR: 800000000282b033 CR: 24002822 XER: 0000000a[ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0[ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001[ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff[ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000[ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb[ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0[ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000[ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001[ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760[ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0[ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0[ 2.553199] Call Trace:[ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable)[ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0[ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570[ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650[ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290[ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0[ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870[ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150[ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50[ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0[ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec(...)[ 2.558892] ---[ end trace 0000000000000000 ]---[ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1[ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144Here the modprobe process ended up with an allocated mm_struct from themm_struct slab that was used before by the debug_vm_pgtable test. That isnot a problem, since the mm_stru---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: subpage: keep TOWRITE tag until folio is cleanedbtrfs_subpage_set_writeback() calls folio_start_writeback() the first timea folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tageven if there are still dirty blocks in the folio. This can break orderingguarantees, such as those required by btrfs_wait_ordered_extents().That ordering breakage leads to a real failure. For example, runninggeneric/464 on a zoned setup will hit the following ASSERT. This happensbecause the broken ordering fails to flush existing dirty pages before thefile size is truncated. assertion failed: !list_empty(&ordered->list) :: 0, in fs/btrfs/zoned.c:1899 ------------[ cut here ]------------ kernel BUG at fs/btrfs/zoned.c:1899! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 1906169 Comm: kworker/u130:2 Kdump: loaded Not tainted 6.16.0-rc6-BTRFS-ZNS+ #554 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_finish_ordered_zoned.cold+0x50/0x52 [btrfs] RSP: 0018:ffffc9002efdbd60 EFLAGS: 00010246 RAX: 000000000000004c RBX: ffff88811923c4e0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff827e38b1 RDI: 00000000ffffffff RBP: ffff88810005d000 R08: 00000000ffffdfff R09: ffffffff831051c8 R10: ffffffff83055220 R11: 0000000000000000 R12: ffff8881c2458c00 R13: ffff88811923c540 R14: ffff88811923c5e8 R15: ffff8881c1bd9680 FS: 0000000000000000(0000) GS:ffff88a04acd0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f907c7a918c CR3: 0000000004024000 CR4: 0000000000350ef0 Call Trace: ? srso_return_thunk+0x5/0x5f btrfs_finish_ordered_io+0x4a/0x60 [btrfs] btrfs_work_helper+0xf9/0x490 [btrfs] process_one_work+0x204/0x590 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d6/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x118/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x205/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Consider process A calling writepages() with WB_SYNC_NONE. In zoned mode orfor compressed writes, it locks several folios for delalloc and startswriting them out. Let's call the last locked folio folio X. Suppose thewrite range only partially covers folio X, leaving some pages dirty.Process A calls btrfs_subpage_set_writeback() when building a bio. Thisfunction call clears the TOWRITE tag of folio X, whose size = 8K andthe block size = 4K. It is following state. 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY) <-----> Process A will write this range.Now suppose process B concurrently calls writepages() with WB_SYNC_ALL. Itcalls tag_pages_for_writeback() to tag dirty folios withPAGECACHE_TAG_TOWRITE. Since folio X is still dirty, it gets tagged. Then,B collects tagged folios using filemap_get_folios_tag() and must wait forfolio X to be written before returning from writepages(). 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY|TOWRITE)However, between tagging and collecting, process A may callbtrfs_subpage_set_writeback() and clear folio X's TOWRITE tag. 0 4K 8K | |/////| (flag: DIRTY|WRITEBACK, tag: DIRTY)As a result, process B won't see folio X in its batch, and returns withoutwaiting for it. This breaks the WB_SYNC_ALL ordering requirement.Fix this by using btrfs_subpage_set_writeback_keepwrite(), which retainsthe TOWRITE tag. We now manually clear the tag only after the folio becomesclean, via the xas operation.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: Fix configfs group list head handlingDoing a list_del() on the epf_group field of struct pci_epf_driver inpci_epf_remove_cfs() is not correct as this field is a list head, nota list entry. This list_del() call triggers a KASAN warning when anendpoint function driver which has a configfs attribute group is torndown:==================================================================BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONEHardware name: Radxa ROCK 5B (DT)Call trace:show_stack+0x2c/0x84 (C)dump_stack_lvl+0x70/0x98print_report+0x17c/0x538kasan_report+0xb8/0x190__asan_report_store8_noabort+0x20/0x2cpci_epf_remove_cfs+0x17c/0x198pci_epf_unregister_driver+0x18/0x30nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf]__arm64_sys_delete_module+0x264/0x424invoke_syscall+0x70/0x260el0_svc_common.constprop.0+0xac/0x230do_el0_svc+0x40/0x58el0_svc+0x48/0xdcel0t_64_sync_handler+0x10c/0x138el0t_64_sync+0x198/0x19c...Remove this incorrect list_del() call from pci_epf_remove_cfs().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: x86/aegis - Add missing error checksThe skcipher_walk functions can allocate memory and can fail, sochecking for errors is necessary.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ARM: tegra: Use I/O memcpy to write to IRAMKasan crashes the kernel trying to check boundaries when using thenormal memcpy.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: abort transaction on unexpected eb generation at btrfs_copy_root()If we find an unexpected generation for the extent buffer we are cloningat btrfs_copy_root(), we just WARN_ON() and don't error out and abort thetransaction, meaning we allow to persist metadata with an unexpectedgeneration. Instead of warning only, abort the transaction and return-EUCLEAN.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: macb: fix unregister_netdev call order in macb_remove()When removing a macb device, the driver calls phy_exit() beforeunregister_netdev(). This leads to a WARN from kernfs: ------------[ cut here ]------------ kernfs: can not remove 'attached_dev', no directory WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683 Call trace: kernfs_remove_by_name_ns+0xd8/0xf0 sysfs_remove_link+0x24/0x58 phy_detach+0x5c/0x168 phy_disconnect+0x4c/0x70 phylink_disconnect_phy+0x6c/0xc0 [phylink] macb_close+0x6c/0x170 [macb] ... macb_remove+0x60/0x168 [macb] platform_remove+0x5c/0x80 ...The warning happens because the PHY is being exited while the netdevis still registered. The correct order is to unregister the netdevbefore shutting down the PHY and cleaning up the MDIO bus.Fix this by moving unregister_netdev() ahead of phy_exit() inmacb_remove().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()A malicious HID device can trigger a slab out-of-bounds duringmt_report_fixup() by passing in report descriptor smaller than607 bytes. mt_report_fixup() attempts to patch byte offset 607of the descriptor with 0x25 by first checking if byte offset607 is 0x15 however it lacks bounds checks to verify if thedescriptor is big enough before conducting this check. Fixthis bug by ensuring the descriptor size is at least 608bytes before accessing it.Below is the KASAN splat after the out of bounds access happens:[ 13.671954] ==================================================================[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10[ 13.673297][ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04[ 13.673297] Call Trace:[ 13.673297] [ 13.673297] dump_stack_lvl+0x5f/0x80[ 13.673297] print_report+0xd1/0x660[ 13.673297] kasan_report+0xe5/0x120[ 13.673297] __asan_report_load1_noabort+0x18/0x20[ 13.673297] mt_report_fixup+0x103/0x110[ 13.673297] hid_open_report+0x1ef/0x810[ 13.673297] mt_probe+0x422/0x960[ 13.673297] hid_device_probe+0x2e2/0x6f0[ 13.673297] really_probe+0x1c6/0x6b0[ 13.673297] __driver_probe_device+0x24f/0x310[ 13.673297] driver_probe_device+0x4e/0x220[ 13.673297] __device_attach_driver+0x169/0x320[ 13.673297] bus_for_each_drv+0x11d/0x1b0[ 13.673297] __device_attach+0x1b8/0x3e0[ 13.673297] device_initial_probe+0x12/0x20[ 13.673297] bus_probe_device+0x13d/0x180[ 13.673297] device_add+0xe3a/0x1670[ 13.673297] hid_add_device+0x31d/0xa40[...]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()in ntrig_report_version(), hdev parameter passed from hid_probe().sending descriptor to /dev/uhid can make hdev->dev.parent->parent to nullif hdev->dev.parent->parent is null, usb_dev hasinvalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returnedwhen usb_rcvctrlpipe() use usb_dev,it triggerpage fault error for address(0xffffffffffffff58)add null check logic to ntrig_report_version()before calling hid_to_usb_dev()
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bnxt_en: Fix memory corruption when FW resources change during ifdownbnxt_set_dflt_rings() assumes that it is always called before any TC hasbeen created. So it doesn't take bp->num_tc into account and assumesthat it is always 0 or 1.In the FW resource or capability change scenario, the FW will returnflags in bnxt_hwrm_if_change() that will cause the driver toreinitialize and call bnxt_cancel_reservations(). This will lead tobnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tcmay be greater than 1. This will cause bp->tx_ring[] to be sized toosmall and cause memory corruption in bnxt_alloc_cp_rings().Fix it by properly scaling the TX rings by bp->num_tc in the codepaths mentioned above. Add 2 helper functions to determinebp->tx_nr_rings and bp->tx_nr_rings_per_tc.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ftrace: Fix potential warning in trace_printk_seq during ftrace_dumpWhen calling ftrace_dump_one() concurrently with reading trace_pipe,a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a racecondition.The issue occurs because:CPU0 (ftrace_dump) CPU1 (reader)echo z > /proc/sysrq-trigger!trace_empty(&iter)trace_iterator_reset(&iter) <- len = size = 0 cat /sys/kernel/tracing/trace_pipetrace_find_next_entry_inc(&iter) __find_next_entry ring_buffer_empty_cpu <- all empty return NULLtrace_printk_seq(&iter.seq) WARN_ON_ONCE(s->seq.len >= s->seq.size)In the context between trace_empty() and trace_find_next_entry_inc()during ftrace_dump, the ring buffer data was consumed by other readers.This caused trace_find_next_entry_inc to return NULL, failing to populate`iter.seq`. At this point, due to the prior trace_iterator_reset, both`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,the WARN_ON_ONCE condition is triggered.Move the trace_printk_seq() into the if block that checks to make sure thereturn value of trace_find_next_entry_inc() is non-NULL inftrace_dump_one(), ensuring the 'iter.seq' is properly populated beforesubsequent operations.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:efivarfs: Fix slab-out-of-bounds in efivarfs_d_compareObserved on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can becomenegative, leadings to oob. The issue can be triggered by parallellookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oobFix it by checking 'guid' before cmp.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs/smb: Fix inconsistent refcnt updateA possible inconsistent update of refcount was identified in `smb2_compound_op`.Such inconsistent update could lead to possible resource leaks.Why it is a possible bug:1. In the comment section of the function, it clearly states that thereference to `cfile` should be dropped after calling this function.2. Every control flow path would check and drop the reference to`cfile`, except the patched one.3. Existing callers would not handle refcount update of `cfile` if-ENOMEM is returned.To fix the bug, an extra goto label "out" is added, to make sure that thecleanup logic would always be respected. As the problem is caused by theallocation failure of `vars`, the cleanup logic between label "finished"and "out" can be safely ignored. According to the definition of function`is_replayable_error`, the error code of "-ENOMEM" is not recoverable.Therefore, the replay logic also gets ignored.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/kbuf: fix signedness in this_len calculationWhen importing and using buffers, buf->len is considered unsigned.However, buf->len is converted to signed int when committing. This canlead to unexpected behavior if the buffer is large enough to beinterpreted as a negative value. Make min_t calculation unsigned.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:HID: asus: fix UAF via HID_CLAIMED_INPUT validationAfter hid_hw_start() is called hidinput_connect() will eventually becalled to set up the device with the input layer since theHID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()all input and output reports are processed and corresponding hid_inputsare allocated and configured via hidinput_configure_usages(). Thisprocess involves slot tagging report fields and configuring usagesby setting relevant bits in the capability bitmaps. However it is possiblethat the capability bitmaps are not set at all leading to the subsequenthidinput_has_been_populated() check to fail leading to the freeing of thehid_input and the underlying input device.This becomes problematic because a malicious HID device like aASUS ROG N-Key keyboard can trigger the above scenario via aspecially crafted descriptor which then leads to a user-after-freewhen the name of the freed input device is written to later on afterhid_hw_start(). Below, report 93 intentionally utilises theHID_UP_UNDEFINED Usage Page which is skipped during usageconfiguration, leading to the frees.0x05, 0x0D, // Usage Page (Digitizer)0x09, 0x05, // Usage (Touch Pad)0xA1, 0x01, // Collection (Application)0x85, 0x0D, // Report ID (13)0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)0x09, 0xC5, // Usage (0xC5)0x15, 0x00, // Logical Minimum (0)0x26, 0xFF, 0x00, // Logical Maximum (255)0x75, 0x08, // Report Size (8)0x95, 0x04, // Report Count (4)0xB1, 0x02, // Feature (Data,Var,Abs)0x85, 0x5D, // Report ID (93)0x06, 0x00, 0x00, // Usage Page (Undefined)0x09, 0x01, // Usage (0x01)0x15, 0x00, // Logical Minimum (0)0x26, 0xFF, 0x00, // Logical Maximum (255)0x75, 0x08, // Report Size (8)0x95, 0x1B, // Report Count (27)0x81, 0x02, // Input (Data,Var,Abs)0xC0, // End CollectionBelow is the KASAN splat after triggering the UAF:[ 21.672709] ==================================================================[ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80[ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54[ 21.673700][ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary)[ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014[ 21.673700] Call Trace:[ 21.673700] [ 21.673700] dump_stack_lvl+0x5f/0x80[ 21.673700] print_report+0xd1/0x660[ 21.673700] kasan_report+0xe5/0x120[ 21.673700] __asan_report_store8_noabort+0x1b/0x30[ 21.673700] asus_probe+0xeeb/0xf80[ 21.673700] hid_device_probe+0x2ee/0x700[ 21.673700] really_probe+0x1c6/0x6b0[ 21.673700] __driver_probe_device+0x24f/0x310[ 21.673700] driver_probe_device+0x4e/0x220[...][ 21.673700][ 21.673700] Allocated by task 54:[ 21.673700] kasan_save_stack+0x3d/0x60[ 21.673700] kasan_save_track+0x18/0x40[ 21.673700] kasan_save_alloc_info+0x3b/0x50[ 21.673700] __kasan_kmalloc+0x9c/0xa0[ 21.673700] __kmalloc_cache_noprof+0x139/0x340[ 21.673700] input_allocate_device+0x44/0x370[ 21.673700] hidinput_connect+0xcb6/0x2630[ 21.673700] hid_connect+0xf74/0x1d60[ 21.673700] hid_hw_start+0x8c/0x110[ 21.673700] asus_probe+0x5a3/0xf80[ 21.673700] hid_device_probe+0x2ee/0x700[ 21.673700] really_probe+0x1c6/0x6b0[ 21.673700] __driver_probe_device+0x24f/0x310[ 21.673700] driver_probe_device+0x4e/0x220[...][ 21.673700][ 21.673700] Freed by task 54:[ 21.673700] kasan_save_stack+0x3d/0x60[ 21.673700] kasan_save_track+0x18/0x40[ 21.673700] kasan_save_free_info+0x3f/0x60[ 21.673700] __kasan_slab_free+0x3c/0x50[ 21.673700] kfre---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().syzbot reported the splat below. [0]When atmtcp_v_open() or atmtcp_v_close() is called via connect()or close(), atmtcp_send_control() is called to send an in-kernelspecial message.The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length.Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc.The notable thing is struct atmtcp_control is uAPI but has aspace for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;The special message is processed in atmtcp_recv_control() calledfrom atmtcp_c_send().atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg()The problem is sendmsg() does not validate the message length anduserspace can abuse atmtcp_recv_control() to overwrite any kptrby atmtcp_control.Let's add a new ->pre_send() hook to validate messages from sendmsg().[0]:Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTIKASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f]CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline]RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4cRSP: 0018:ffffc90003f5f810 EFLAGS: 00010203RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068cRBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0ddR10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffffFS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0Call Trace: vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f8d7e96a4a9Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002eRAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702fR10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10acR13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 Modules linked in:
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:trace/fgraph: Fix the warning caused by missing unregister notifierThis warning was triggered during testing on v6.16:notifier callback ftrace_suspend_notifier_call already registeredWARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0...Call Trace: blocking_notifier_chain_register+0x34/0x60 register_ftrace_graph+0x330/0x410 ftrace_profile_write+0x1e9/0x340 vfs_write+0xf8/0x420 ? filp_flush+0x8a/0xa0 ? filp_close+0x1f/0x30 ? do_dup2+0xaf/0x160 ksys_write+0x65/0xe0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7fWhen writing to the function_profile_enabled interface, the notifier wasnot unregistered after start_graph_tracing failed, causing a warning thenext time function_profile_enabled was written.Fixed by adding unregister_pm_notifier in the exception path.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Fix lockdep assertion on sync reset unload eventFix lockdep assertion triggered during sync reset unload event. When thesync reset flow is initiated using the devlink reload fw_activateoption, the PF already holds the devlink lock while handling unloadevent. In this case, delegate sync reset unload event handling back tothe devlink callback process to avoid double-locking and resolve thelockdep warning.Kernel log:WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40[...]Call Trace: mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core] mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core] process_one_work+0x222/0x640 worker_thread+0x199/0x350 kthread+0x10b/0x230 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x8e/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mISDN: hfcpci: Fix warning when deleting uninitialized timerWith CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leadsto the following splat:[ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0[ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0[ 250.218775] Modules linked in: hfcpci(-) mISDN_core[ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary)[ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0[ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d[ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286[ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95[ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0[ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39[ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001[ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8[ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000[ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0[ 250.236117] Call Trace:[ 250.236599] [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130[ 250.237920] debug_object_assert_init+0x1f6/0x310[ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10[ 250.239658] ? __lock_acquire+0xdea/0x1c70[ 250.240369] __try_to_del_timer_sync+0x69/0x140[ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10[ 250.242058] ? __timer_delete_sync+0xc6/0x120[ 250.242842] ? lock_acquire+0x30/0x80[ 250.243474] ? __timer_delete_sync+0xc6/0x120[ 250.244262] __timer_delete_sync+0x98/0x120[ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci][ 250.245704] __do_sys_delete_module+0x348/0x510[ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10[ 250.247338] do_syscall_64+0xc1/0x360[ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7fFix this by initializing hfc_tl timer with DEFINE_TIMER macro.Also, use mod_timer instead of manual timeout update.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:batman-adv: fix OOB read/write in network-coding decodebatadv_nc_skb_decode_packet() trusts coded_len and checks only againstskb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducingpayload headroom, and the source skb length is not verified, allowing anout-of-bounds read and a small out-of-bounds write.Validate that coded_len fits within the payload area of both destinationand source sk_buffs before XORing.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: lpfc: Fix buffer free/clear order in deferred receive pathFix a use-after-free window by correcting the buffer release sequence inthe deferred receive path. The code freed the RQ buffer first and onlythen cleared the context pointer under the lock. Concurrent paths (e.g.,ABTS and the repost path) also inspect and release the same pointer underthe lock, so the old order could lead to double-free/UAF.Note that the repost path already uses the correct pattern: detach thepointer under the lock, then free it after dropping the lock. Thedeferred path should do the same.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm: move page table sync declarations to linux/pgtable.hDuring our internal testing, we started observing intermittent bootfailures when the machine uses 4-level paging and has a large amount ofpersistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] It turns out that the kernel panics while initializing vmemmap (structpage array) when the vmemmap region spans two PGD entries, because the newPGD entry is only installed in init_mm.pgd, but not in the page tables ofother tasks.And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap);In the normal path, vmemmap_populate() in arch/x86/mm/init_64.csynchronizes the top level page table (See commit 9b861528a801 ("x86-64,mem: Update all PGDs for direct mapping and vmemmap mapping changes")) sothat all tasks in the system can see the new vmemmap area.However, when vmemmap_can_optimize() returns true, the optimized pathskips synchronization of top-level page tables. This is becausevmemmap_populate_compound_pages() is implemented in core MM code, whichdoes not handle synchronization of the top-level page tables. Instead,the core MM has historically relied on each architecture to perform thissynchronization manually.We're not the first party to encounter a crash caused by not-sync'd toplevel page tables: earlier this year, Gwan-gyeong Mun attempted to addressthe issue [1] [2] after hitting a kernel panic when x86 code accessed thevmemmap area before the corresponding top-level entries were synced. Atthat time, the issue was believed to be triggered only when struct pagewas enlarged for debugging purposes, and the patch did not get furtherupdates.It turns out that current approach of relying on each arch to handle thepage table sync manually is fragile because 1) it's easy to forget to syncthe top level page table, and 2) it's also easy to overlook that thekernel should not access the vmemmap and direct mapping areas before thesync.# The solution: Make page table sync more code robust and harder to missTo address this, Dave Hansen suggested [3] [4] introducing{pgd,p4d}_populate_kernel() for updating kernel portion of the page tablesand allow each architecture to explicitly perform synchronization wheninstalling top-level entries. With this approach, we no longer need toworry about missing the sync step, reducing the risk of futureregressions.The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK,PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used byvmalloc and ioremap to synchronize page tables.pgd_populate_kernel() looks like this:static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d){ pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr);}It is worth noting that vmalloc() and apply_to_range() carefullysynchronizes page tables by calling p*d_alloc_track() andarch_sync_kernel_mappings(), and thus they are not affected by---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensurepage tables are properly synchronized when calling p*d_populate_kernel().For 5-level paging, synchronization is performed viapgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, sosynchronization is instead performed at the P4D level viap4d_populate_kernel().This fixes intermittent boot failures on systems using 4-level paging anda large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmapbefore sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region()In __iodyn_find_io_region(), pcmcia_make_resource() is assigned tores and used in pci_bus_alloc_resource(). There is a dereference of resin pci_bus_alloc_resource(), which could lead to a NULL pointerdereference on failure of pcmcia_make_resource().Fix this bug by adding a check of res.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ppp: fix memory leak in pad_compress_skbIf alloc_skb() fails in pad_compress_skb(), it returns NULL withoutreleasing the old skb. The caller does: skb = pad_compress_skb(ppp, skb); if (!skb) goto drop;drop: kfree_skb(skb);When pad_compress_skb() returns NULL, the reference to the old skb islost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.Align pad_compress_skb() semantics with realloc(): only free the oldskb if allocation and compression succeed. At the call site, use thenew_skb variable so the original skb is not lost when pad_compress_skb()fails.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it wouldlead to memory corruption so add some bounds checking.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vxlan: Fix NPD in {arp,neigh}_reduce() when using nexthop objectsWhen the "proxy" option is enabled on a VXLAN device, the device willsuppress ARP requests and IPv6 Neighbor Solicitation messages if it isable to reply on behalf of the remote host. That is, if a matching andvalid neighbor entry is configured on the VXLAN device whose MAC addressis not behind the "any" remote (0.0.0.0 / ::).The code currently assumes that the FDB entry for the neighbor's MACaddress points to a valid remote destination, but this is incorrect ifthe entry is associated with an FDB nexthop group. This can result in aNPD [1][3] which can be reproduced using [2][4].Fix by checking that the remote destination exists before dereferencingit.[1]BUG: kernel NULL pointer dereference, address: 0000000000000000[...]CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014RIP: 0010:vxlan_xmit+0xb58/0x15f0[...]Call Trace: dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53[2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3[3]BUG: kernel NULL pointer dereference, address: 0000000000000000[...]CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014RIP: 0010:vxlan_xmit+0x803/0x1600[...]Call Trace: dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53RIP: 0033:0x7f383422ec77[4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vxlan: Fix NPD when refreshing an FDB entry with a nexthop objectVXLAN FDB entries can point to either a remote destination or an FDBnexthop group. The latter is usually used in EVPN deployments wherelearning is disabled.However, when learning is enabled, an incoming packet might try torefresh an FDB entry that points to an FDB nexthop group and thereforedoes not have a remote. Such packets should be dropped, but they areonly dropped after dereferencing the non-existent remote, resulting in aNPD [1] which can be reproduced using [2].Fix by dropping such packets earlier. Remove the misleading comment fromfirst_remote_rcu().[1]BUG: kernel NULL pointer dereference, address: 0000000000000000[...]CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014RIP: 0010:vxlan_snoop+0x98/0x1e0[...]Call Trace: vxlan_encap_bypass+0x209/0x240 encap_bypass_if_local+0xb1/0x100 vxlan_xmit_one+0x1375/0x17e0 vxlan_xmit+0x6b4/0x15f0 dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53[2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip address add 192.0.2.2/32 dev lo ip nexthop add id 1 via 192.0.2.3 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020 bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: Fix potential invalid access when MAC list is emptylist_first_entry() never returns NULL - if the list is empty, it stillreturns a pointer to an invalid object, leading to potential invalidmemory access when dereferenced.Fix this by using list_first_entry_or_null instead of list_first_entry.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ice: fix NULL access of tx->in_use in ice_ll_ts_intrRecent versions of the E810 firmware have support for an extra interrupt tohandle report of the "low latency" Tx timestamps coming from thespecialized low latency firmware interface. Instead of polling theregisters, software can wait until the low latency interrupt is fired.This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, asit uses the same "ready" bitmap to track which Tx timestamps complete.Unfortunately, the ice_ll_ts_intr() function does not check if thetracker is initialized before its first access. This results in NULLdereference or use-after-free bugs similar to the issues fixed in theice_ptp_ts_irq() function.Fix this by only checking the in_use bitmap (and other fields) if thetracker is marked as initialized. The reset flow will clear the init fieldunder lock before it tears the tracker down, thus preventing anyuse-after-free or NULL access.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ptp: ocp: fix use-after-free bugs causing by ptp_ocp_watchdogThe ptp_ocp_detach() only shuts down the watchdog timer if it ispending. However, if the timer handler is already running, thetimer_delete_sync() is not called. This leads to race conditionswhere the devlink that contains the ptp_ocp is deallocated whilethe timer handler is still accessing it, resulting in use-after-freebugs. The following details one of the race scenarios.(thread 1) | (thread 2)ptp_ocp_remove() | ptp_ocp_detach() | ptp_ocp_watchdog() if (timer_pending(&bp->watchdog))| bp = timer_container_of() timer_delete_sync() | | devlink_free(devlink) //free | | bp-> //useResolve this by unconditionally calling timer_delete_sync() to ensurethe timer is reliably deactivated, preventing any access after free.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen()syzbot reported the splat below without a repro.In the splat, a single thread calling bt_accept_dequeue() freed skand touched it after that.The root cause would be the racy l2cap_sock_cleanup_listen() calladded by the cited commit.bt_accept_dequeue() is called under lock_sock() except forl2cap_sock_release().Two threads could see the same socket during the list iterationin bt_accept_dequeue(): CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAFDepending on the timing, the other thread could show up in the"Freed by task" part.Let's call l2cap_sock_cleanup_listen() under lock_sock() inl2cap_sock_release().[0]:BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline]BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f2accf8ebe9Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166fR10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609cR13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_nopro---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: vhci: Prevent use-after-free by removing debugfs files earlyMove the creation of debugfs files into a dedicated function, and ensurethey are explicitly removed during vhci_release(), before associateddata structures are freed.Previously, debugfs files such as "force_suspend", "force_wakeup", andothers were created under hdev->debugfs but not removed invhci_release(). Since vhci_release() frees the backing vhci_datastructure, any access to these files after release would result inuse-after-free errors.Although hdev->debugfs is later freed in hci_release_dev(), user canaccess files after vhci_data is freed but before hdev->debugfs isreleased.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info workThe brcmf_btcoex_detach() only shuts down the btcoex timer, if theflag timer_on is false. However, the brcmf_btcoex_timerfunc(), whichruns as timer handler, sets timer_on to false. This creates criticalrace conditions:1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()is executing, it may observe timer_on as false and skip the call totimer_shutdown_sync().2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_infoworker after the cancel_work_sync() has been executed, resulting inuse-after-free bugs.The use-after-free bugs occur in two distinct scenarios, depending onthe timing of when the brcmf_btcoex_info struct is freed relative tothe execution of its worker thread.Scenario 1: Freed before the worker is scheduledThe brcmf_btcoex_info is deallocated before the worker is scheduled.A race condition can occur when schedule_work(&bt_local->work) iscalled after the target memory has been freed. The sequence of eventsis detailed below:CPU0 | CPU1brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | kfree(cfg->btcoex); // FREE | | schedule_work(&bt_local->work); // USEScenario 2: Freed after the worker is scheduledThe brcmf_btcoex_info is freed after the worker has been scheduledbut before or during its execution. In this case, statements withinthe brcmf_btcoex_handler() - such as the container_of macro andsubsequent dereferences of the brcmf_btcoex_info object will causea use-after-free access. The following timeline illustrates thisscenario:CPU0 | CPU1brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | schedule_work(); // Reschedule | kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker /* | btci = container_of(....); // USE The kfree() above could | ... also occur at any point | btci-> // USE during the worker's execution| */ |To resolve the race conditions, drop the conditional check and calltimer_shutdown_sync() directly. It can deactivate the timer reliably,regardless of its current state. Once stopped, the timer_on state isthen set to false.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: fix use-after-free in cmp_bss()Following bss_free() quirk introduced in commit 776b3580178f("cfg80211: track hidden SSID networks properly"), adjustcfg80211_update_known_bss() to free the last beacon frameelements only if they're not shared via the corresponding'hidden_beacon_bss' pointer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: ti: edma: Fix memory allocation size for queue_priority_mapFix a critical memory allocation bug in edma_setup_from_hw() wherequeue_priority_map was allocated with insufficient memory. The codedeclared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8),but allocated memory using sizeof(s8) instead of the correct size.This caused out-of-bounds memory writes when accessing: queue_priority_map[i][0] = i; queue_priority_map[i][1] = i;The bug manifested as kernel crashes with "Oops - undefined instruction"on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as thememory corruption triggered kernel hardening features on Clang.Change the allocation to use sizeof(*queue_priority_map) whichautomatically gets the correct size for the 2D array structure.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: idxd: Fix double free in idxd_setup_wqs()The clean up in idxd_setup_wqs() has had a couple bugs because the errorhandling is a bit subtle. It's simpler to just re-write it in a cleanerway. The issues here are:1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when "conf_dev" hasn't been initialized.2) If kzalloc_node() fails then again "conf_dev" is invalid. It's either uninitialized or it points to the "conf_dev" from the previous iteration so it leads to a double free.It's better to free partial loop iterations within the loop and thenthe unwinding at the end can handle whole loop iterations. I alsorenamed the labels to describe what the goto does and not where the gotowas located.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:dmaengine: idxd: Remove improper idxd_freeThe call to idxd_free() introduces a duplicate put_device() leading to areference count underflow:refcount_t: underflow; use-after-free.WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110...Call Trace: idxd_remove+0xe4/0x120 [idxd] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x197/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x74/0xf0 pci_unregister_driver+0x2e/0xb0 idxd_exit_module+0x34/0x7a0 [idxd] __do_sys_delete_module.constprop.0+0x183/0x280 do_syscall_64+0x54/0xd70 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe idxd_unregister_devices() which is invoked at the very beginning ofidxd_remove(), already takes care of the necessary put_device() through thefollowing call path:idxd_unregister_devices() -> device_unregister() -> put_device()In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() maytrigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() iscalled immediately after, it can result in a use-after-free.Remove the improper idxd_free() to avoid both the refcount underflow andpotential memory corruption during module unload.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKBcan_put_echo_skb() takes ownership of the SKB and it may be freedduring or after the call.However, xilinx_can xcan_write_frame() keeps using SKB after the call.Fix that by only calling can_put_echo_skb() after the code is donetouching the SKB.The tx_lock is held for the entire xcan_write_frame() execution andalso on the can_get_echo_skb() side so the order of operations does notmatter.An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skbmemory") did not move the can_put_echo_skb() call far enough.[mkl: add "commit" in front of sha1 in patch description][mkl: fix indention]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable()The function of_phy_find_device may return NULL, so we need to takecare before dereferencing phy_dev.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:libceph: fix invalid accesses to ceph_connection_v1_infoThere is a place where generic code in messenger.c is reading andanother place where it is writing to con->v1 union member withoutchecking that the union member is active (i.e. msgr1 is in use).On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,so such a read is almost guaranteed to return a bogus value instead of0 when msgr2 is in use. This ends up being fairly benign because theside effect is just the invalidation of the authorizer and successivefetching of new tickets.con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact thatit's being written to can cause more serious consequences, but luckilyit's not something that happens often.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:kernfs: Fix UAF in polling when open file is releasedA use-after-free (UAF) vulnerability was identified in the PSI (PressureStall Information) monitoring mechanism:BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140Read of size 8 at addr ffff3de3d50bd308 by task systemd/1psi_trigger_poll+0x3c/0x140cgroup_pressure_poll+0x70/0xa0cgroup_file_poll+0x8c/0x100kernfs_fop_poll+0x11c/0x1c0ep_item_poll.isra.0+0x188/0x2c0Allocated by task 1:cgroup_file_open+0x88/0x388kernfs_fop_open+0x73c/0xaf0do_dentry_open+0x5fc/0x1200vfs_open+0xa0/0x3f0do_open+0x7e8/0xd08path_openat+0x2fc/0x6b0do_filp_open+0x174/0x368Freed by task 8462:cgroup_file_release+0x130/0x1f8kernfs_drain_open_files+0x17c/0x440kernfs_drain+0x2dc/0x360kernfs_show+0x1b8/0x288cgroup_file_show+0x150/0x268cgroup_pressure_write+0x1dc/0x340cgroup_file_write+0x274/0x548Reproduction Steps:1. Open test/cpu.pressure and establish epoll monitoring2. Disable monitoring: echo 0 > test/cgroup.pressure3. Re-enable monitoring: echo 1 > test/cgroup.pressureThe race condition occurs because:1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it: - Releases PSI triggers via cgroup_file_release() - Frees of->priv through kernfs_drain_open_files()2. While epoll still holds reference to the file and continues polling3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->privepolling disable/enable cgroup.pressurefd=open(cpu.pressure)while(1)...epoll_waitkernfs_fop_pollkernfs_get_active = true echo 0 > cgroup.pressure... cgroup_file_show kernfs_show // inactive kn kernfs_drain_open_files cft->release(of); kfree(ctx); ...kernfs_get_active = false echo 1 > cgroup.pressure kernfs_show kernfs_activate_one(kn);kernfs_fop_pollkernfs_get_active = truecgroup_file_pollpsi_trigger_poll// UAF...end: close(fd)To address this issue, introduce kernfs_get_active_of() for kernfs openfiles to obtain active references. This function will fail if the open filehas been released. Replace kernfs_get_active() with kernfs_get_active_of()to prevent further operations on released file descriptors.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/mediatek: fix potential OF node use-after-freeThe for_each_child_of_node() helper drops the reference it takes to eachnode as it iterates over children and an explicit of_node_put() is onlyneeded when exiting the loop early.Drop the recently introduced bogus additional reference count decrementat each iteration that could potentially lead to a use-after-free.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sched: Fix sched_numa_find_nth_cpu() if mask offlinesched_numa_find_nth_cpu() uses a bsearch to look for the 'closest'CPU in sched_domains_numa_masks and given cpus mask. However theymight not intersect if all CPUs in the cpus mask are offline. bsearchwill return NULL in that case, bail out instead of dereferencing abogus pointer.The previous behaviour lead to this bug when using maxcpus=4 on anrk3399 (LLLLbb) (i.e. booting with all big CPUs offline):[ 1.422922] Unable to handle kernel paging request at virtual address ffffff8000000000[ 1.423635] Mem abort info:[ 1.423889] ESR = 0x0000000096000006[ 1.424227] EC = 0x25: DABT (current EL), IL = 32 bits[ 1.424715] SET = 0, FnV = 0[ 1.424995] EA = 0, S1PTW = 0[ 1.425279] FSC = 0x06: level 2 translation fault[ 1.425735] Data abort info:[ 1.425998] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000[ 1.426499] CM = 0, WnR = 0, TnD = 0, TagAccess = 0[ 1.426952] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[ 1.427428] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000004a9f000[ 1.428038] [ffffff8000000000] pgd=18000000f7fff403, p4d=18000000f7fff403, pud=18000000f7fff403, pmd=0000000000000000[ 1.429014] Internal error: Oops: 0000000096000006 [#1] SMP[ 1.429525] Modules linked in:[ 1.429813] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc4-dirty #343 PREEMPT[ 1.430559] Hardware name: Pine64 RockPro64 v2.1 (DT)[ 1.431012] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 1.431634] pc : sched_numa_find_nth_cpu+0x2a0/0x488[ 1.432094] lr : sched_numa_find_nth_cpu+0x284/0x488[ 1.432543] sp : ffffffc084e1b960[ 1.432843] x29: ffffffc084e1b960 x28: ffffff80078a8800 x27: ffffffc0846eb1d0[ 1.433495] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000[ 1.434144] x23: 0000000000000000 x22: fffffffffff7f093 x21: ffffffc081de6378[ 1.434792] x20: 0000000000000000 x19: 0000000ffff7f093 x18: 00000000ffffffff[ 1.435441] x17: 3030303866666666 x16: 66663d736b73616d x15: ffffffc104e1b5b7[ 1.436091] x14: 0000000000000000 x13: ffffffc084712860 x12: 0000000000000372[ 1.436739] x11: 0000000000000126 x10: ffffffc08476a860 x9 : ffffffc084712860[ 1.437389] x8 : 00000000ffffefff x7 : ffffffc08476a860 x6 : 0000000000000000[ 1.438036] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000[ 1.438683] x2 : 0000000000000000 x1 : ffffffc0846eb000 x0 : ffffff8000407b68[ 1.439332] Call trace:[ 1.439559] sched_numa_find_nth_cpu+0x2a0/0x488 (P)[ 1.440016] smp_call_function_any+0xc8/0xd0[ 1.440416] armv8_pmu_init+0x58/0x27c[ 1.440770] armv8_cortex_a72_pmu_init+0x20/0x2c[ 1.441199] arm_pmu_device_probe+0x1e4/0x5e8[ 1.441603] armv8_pmu_device_probe+0x1c/0x28[ 1.442007] platform_probe+0x5c/0xac[ 1.442347] really_probe+0xbc/0x298[ 1.442683] __driver_probe_device+0x78/0x12c[ 1.443087] driver_probe_device+0xdc/0x160[ 1.443475] __driver_attach+0x94/0x19c[ 1.443833] bus_for_each_dev+0x74/0xd4[ 1.444190] driver_attach+0x24/0x30[ 1.444525] bus_add_driver+0xe4/0x208[ 1.444874] driver_register+0x60/0x128[ 1.445233] __platform_driver_register+0x24/0x30[ 1.445662] armv8_pmu_driver_init+0x28/0x4c[ 1.446059] do_one_initcall+0x44/0x25c[ 1.446416] kernel_init_freeable+0x1dc/0x3bc[ 1.446820] kernel_init+0x20/0x1d8[ 1.447151] ret_from_fork+0x10/0x20[ 1.447493] Code: 90022e21 f000e5f5 910de2b5 2a1703e2 (f8767803)[ 1.448040] ---[ end trace 0000000000000000 ]---[ 1.448483] note: swapper/0[1] exited with preempt_count 1[ 1.449047] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b[ 1.449741] SMP: stopping secondary CPUs[ 1.450105] Kernel Offset: disabled[ 1.450419] CPU features: 0x000000,00080000,20002001,0400421b[ ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net_sched: gen_estimator: fix est_timer() vs CONFIG_PREEMPT_RT=ysyzbot reported a WARNING in est_timer() [1]Problem here is that with CONFIG_PREEMPT_RT=y, timer callbackscan be preempted.Adopt preempt_disable_nested()/preempt_enable_nested() to fix this.[1] WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline] WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93Modules linked in:CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline] RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93Call Trace: call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747 expire_timers kernel/time/timer.c:1798 [inline] __run_timers kernel/time/timer.c:2372 [inline] __run_timer_base+0x648/0x970 kernel/time/timer.c:2384 run_timer_base kernel/time/timer.c:2393 [inline] run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403 handle_softirqs+0x22c/0x710 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] run_ktimerd+0xcf/0x190 kernel/softirq.c:1043 smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160 kthread+0x70e/0x8a0 kernel/kthread.c:463 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/slub: avoid accessing metadata when pointer is invalid in object_err()object_err() reports details of an object for further debugging, such asthe freelist pointer, redzone, etc. However, if the pointer is invalid,attempting to access object metadata can lead to a crash since it doesnot point to a valid object.One known path to the crash is when alloc_consistency_checks()determines the pointer to the allocated object is invalid because of afreelist corruption, and calls object_err() to report it. The debug codeshould report and handle the corruption gracefully and not crash in theprocess.In case the pointer is NULL or check_valid_pointer() returns false forthe pointer, only print the pointer value and skip accessing metadata.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mtd: rawnand: stm32_fmc2: avoid overlapping mappings on ECC bufferAvoid below overlapping mappings by using a contiguousnon-cacheable buffer.[ 4.077708] DMA-API: stm32_fmc2_nfc 48810000.nand-controller: cacheline tracking EEXIST,overlapping mappings aren't supported[ 4.089103] WARNING: CPU: 1 PID: 44 at kernel/dma/debug.c:568 add_dma_entry+0x23c/0x300[ 4.097071] Modules linked in:[ 4.100101] CPU: 1 PID: 44 Comm: kworker/u4:2 Not tainted 6.1.82 #1[ 4.106346] Hardware name: STMicroelectronics STM32MP257F VALID1 SNOR / MB1704 (LPDDR4 Power discrete) + MB1703 + MB1708 (SNOR MB1730) (DT)[ 4.118824] Workqueue: events_unbound deferred_probe_work_func[ 4.124674] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 4.131624] pc : add_dma_entry+0x23c/0x300[ 4.135658] lr : add_dma_entry+0x23c/0x300[ 4.139792] sp : ffff800009dbb490[ 4.143016] x29: ffff800009dbb4a0 x28: 0000000004008022 x27: ffff8000098a6000[ 4.150174] x26: 0000000000000000 x25: ffff8000099e7000 x24: ffff8000099e7de8[ 4.157231] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff8000098a6a20[ 4.164388] x20: ffff000080964180 x19: ffff800009819ba0 x18: 0000000000000006[ 4.171545] x17: 6361727420656e69 x16: 6c6568636163203a x15: 72656c6c6f72746e[ 4.178602] x14: 6f632d646e616e2e x13: ffff800009832f58 x12: 00000000000004ec[ 4.185759] x11: 00000000000001a4 x10: ffff80000988af58 x9 : ffff800009832f58[ 4.192916] x8 : 00000000ffffefff x7 : ffff80000988af58 x6 : 80000000fffff000[ 4.199972] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000[ 4.207128] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000812d2c40[ 4.214185] Call trace:[ 4.216605] add_dma_entry+0x23c/0x300[ 4.220338] debug_dma_map_sg+0x198/0x350[ 4.224373] __dma_map_sg_attrs+0xa0/0x110[ 4.228411] dma_map_sg_attrs+0x10/0x2c[ 4.232247] stm32_fmc2_nfc_xfer.isra.0+0x1c8/0x3fc[ 4.237088] stm32_fmc2_nfc_seq_read_page+0xc8/0x174[ 4.242127] nand_read_oob+0x1d4/0x8e0[ 4.245861] mtd_read_oob_std+0x58/0x84[ 4.249596] mtd_read_oob+0x90/0x150[ 4.253231] mtd_read+0x68/0xac
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/vmalloc, mm/kasan: respect gfp mask in kasan_populate_vmalloc()kasan_populate_vmalloc() and its helpers ignore the caller's gfp_mask andalways allocate memory using the hardcoded GFP_KERNEL flag. This makesthem inconsistent with vmalloc(), which was recently extended to supportGFP_NOFS and GFP_NOIO allocations.Page table allocations performed during shadow population also ignore theexternal gfp_mask. To preserve the intended semantics of GFP_NOFS andGFP_NOIO, wrap the apply_to_page_range() calls into the appropriatememalloc scope.xfs calls vmalloc with GFP_NOFS, so this bug could lead to deadlock.There was a report herehttps://lkml.kernel.org/r/686ea951.050a0220.385921.0016.GAE@google.comThis patch: - Extends kasan_populate_vmalloc() and helpers to take gfp_mask; - Passes gfp_mask down to alloc_pages_bulk() and __get_free_page(); - Enforces GFP_NOFS/NOIO semantics with memalloc_*_save()/restore() around apply_to_page_range(); - Updates vmalloc.c and percpu allocator call sites accordingly.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error pathIf request_irq() in i40e_vsi_request_irq_msix() fails in an iterationlater than the first, the error path wants to free the IRQs requestedso far. However, it uses the wrong dev_id argument for free_irq(), soit does not free the IRQs correctly and instead triggers the warning: Trying to free already-free IRQ 173 WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0 Modules linked in: i40e(+) [...] CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:__free_irq+0x192/0x2c0 [...] Call Trace: free_irq+0x32/0x70 i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e] i40e_vsi_request_irq+0x79/0x80 [i40e] i40e_vsi_open+0x21f/0x2f0 [i40e] i40e_open+0x63/0x130 [i40e] __dev_open+0xfc/0x210 __dev_change_flags+0x1fc/0x240 netif_change_flags+0x27/0x70 do_setlink.isra.0+0x341/0xc70 rtnl_newlink+0x468/0x860 rtnetlink_rcv_msg+0x375/0x450 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x288/0x3c0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x3a2/0x3d0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x82/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] ---[ end trace 0000000000000000 ]---Use the same dev_id for free_irq() as for request_irq().I tested this with inserting code to fail intentionally.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pcmcia: Add error handling for add_interval() in do_validate_mem()In the do_validate_mem(), the call to add_interval() does nothandle errors. If kmalloc() fails in add_interval(), it couldresult in a null pointer being inserted into the linked list,leading to illegal memory access when sub_interval() is callednext.This patch adds an error handling for the add_interval(). Ifadd_interval() returns an error, the function will return earlywith the error code.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: j1939: implement NETDEV_UNREGISTER notification handlersyzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2problem, for j1939 protocol did not have NETDEV_UNREGISTER notificationhandler for undoing changes made by j1939_sk_bind().Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destructcallback") expects that a call to j1939_priv_put() can be unconditionallydelayed until j1939_sk_sock_destruct() is called. But we need to callj1939_priv_put() against an extra ref held by j1939_sk_bind() call(as a part of undoing changes made by j1939_sk_bind()) as soon asNETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct()is called via j1939_sk_release()). Otherwise, the extra ref on "structj1939_priv" held by j1939_sk_bind() call prevents "struct net_device" fromdropping the usage count to 1; making it impossible forunregister_netdevice() to continue.[mkl: remove space in front of label]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - Set merge to zero early in af_alg_sendmsgIf an error causes af_alg_sendmsg to abort, ctx->merge may containa garbage value from the previous loop. This may then trigger acrash on the next entry into af_alg_sendmsg when it attempts to doa merge that can't be done.Fix this by setting ctx->merge to zero near the start of the loop.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm: bridge: anx7625: Fix NULL pointer dereference with early IRQIf the interrupt occurs before resource initialization is complete, theinterrupt handler/worker may access uninitialized data such as the I2Ctcpc_client device, potentially leading to NULL pointer dereference.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointerSince commit 7d5e9737efda ("net: rfkill: gpio: get the name and type fromdevice property") rfkill_find_type() gets called with the possiblyuninitialized "const char *type_name;" local variable.On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data;and there is no "type" property so device_property_read_string() will failand leave type_name uninitialized, leading to a potential crash.rfkill_find_type() does accept a NULL pointer, fix the potential crashby initializing type_name to NULL.Note likely sofar this has not been caught because:1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device2. The stack happened to contain NULL where type_name is stored
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: qcom: q6apm-lpass-dais: Fix NULL pointer dereference if source graph failedIf earlier opening of source graph fails (e.g. ADSP rejects due toincorrect audioreach topology), the graph is closed and"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sinkgraph continues though and next call to q6apm_lpass_dai_prepare()receives dai_data->graph[dai->id]=NULL leading to NULL pointerexception: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 ... Call trace: q6apm_graph_media_format_pcm+0x48/0x120 (P) q6apm_lpass_dai_prepare+0x110/0x1b4 snd_soc_pcm_dai_prepare+0x74/0x108 __soc_pcm_prepare+0x44/0x160 dpcm_be_dai_prepare+0x124/0x1c0
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),which does not ensure that the delayed work item synctstamp_work has fullycompleted if it was already running. This leads to use-after-free scenarioswhere otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_workremains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().Furthermore, the synctstamp_work is cyclic, the likelihood of triggeringthe bug is nonnegligible.A typical race condition is illustrated below:CPU 0 (cleanup) | CPU 1 (delayed work callback)otx2_remove() | otx2_ptp_destroy() | otx2_sync_tstamp() cancel_delayed_work() | kfree(ptp) | | ptp = container_of(...); //UAF | ptp-> //UAFThis is confirmed by a KASAN report:BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0Write of size 8 at addr ffff88800aa09a18 by task bash/136...Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ...Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 otx2_ptp_init+0xb1/0x860 otx2_probe+0x4eb/0xc30 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30Freed by task 136: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 otx2_ptp_destroy+0x38/0x80 otx2_remove+0x10d/0x4c0 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f...Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensurethat the delayed work item is properly canceled before the otx2_ptp isdeallocated.This bug was initially identified through static analysis. To reproduceand test it, I simulated the OcteonTX2 PCI device in QEMU and introducedartificial delays within the otx2_sync_tstamp() function to increase thelikelihood of triggering the bug.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tls: make sure to abort the stream if headers are bogusNormally we wait for the socket to buffer up the whole recordbefore we service it. If the socket has a tiny buffer, however,we read out the data sooner, to prevent connection stalls.Make sure that we abort the connection when we find out latethat the record is actually invalid. Retrying the parsing isfine in itself but since we copy some more data each timebefore we parse we can overflow the allocated skb space.Constructing a scenario in which we're under pressure withoutenough data in the socket to parse the length upfront is quitehard. syzbot figured out a way to do this by serving us the headerin small OOB sends, and then filling in the recvbuf with a largenormal send.Make sure that tls_rx_msg_size() aborts strp, if we reachan invalid record there's really no way to recover.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_event: Fix UAF in hci_acl_create_conn_syncThis fixes the following UFA in hci_acl_create_conn_sync where aconnection still pending is command submission (conn->state == BT_OPEN)maybe freed, also since this also can happen with the likes ofhci_le_create_conn_sync fix it as well:BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861Write of size 2 at addr ffff88805ffcc038 by task kworker/u11:2/9541CPU: 1 UID: 0 PID: 9541 Comm: kworker/u11:2 Not tainted 6.16.0-rc7 #3 PREEMPT(full)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014Workqueue: hci3 hci_cmd_sync_workCall Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x230 mm/kasan/report.c:480 kasan_report+0x118/0x150 mm/kasan/report.c:593 hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 Allocated by task 123736: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] __hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939 hci_conn_add_unset net/bluetooth/hci_conn.c:1051 [inline] hci_connect_acl+0x16c/0x4e0 net/bluetooth/hci_conn.c:1634 pair_device+0x418/0xa70 net/bluetooth/mgmt.c:3556 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 sock_write_iter+0x258/0x330 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x54b/0xa90 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fFreed by task 103680: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x18e/0x440 mm/slub.c:4842 device_release+0x9c/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline] hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173 hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199 hci_event_func net/bluetooth/hci_event.c:7477 [inline] hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531 hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/sour---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: tun: Update napi->skb after XDP processThe syzbot report a UAF issue: BUG: KASAN: slab-use-after-free in skb_reset_mac_header include/linux/skbuff.h:3150 [inline] BUG: KASAN: slab-use-after-free in napi_frags_skb net/core/gro.c:723 [inline] BUG: KASAN: slab-use-after-free in napi_gro_frags+0x6e/0x1030 net/core/gro.c:758 Read of size 8 at addr ffff88802ef22c18 by task syz.0.17/6079 CPU: 0 UID: 0 PID: 6079 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 skb_reset_mac_header include/linux/skbuff.h:3150 [inline] napi_frags_skb net/core/gro.c:723 [inline] napi_gro_frags+0x6e/0x1030 net/core/gro.c:758 tun_get_user+0x28cb/0x3e20 drivers/net/tun.c:1920 tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 6079: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:330 [inline] __kasan_mempool_unpoison_object+0xa0/0x170 mm/kasan/common.c:558 kasan_mempool_unpoison_object include/linux/kasan.h:388 [inline] napi_skb_cache_get+0x37b/0x6d0 net/core/skbuff.c:295 __alloc_skb+0x11e/0x2d0 net/core/skbuff.c:657 napi_alloc_skb+0x84/0x7d0 net/core/skbuff.c:811 napi_get_frags+0x69/0x140 net/core/gro.c:673 tun_napi_alloc_frags drivers/net/tun.c:1404 [inline] tun_get_user+0x77c/0x3e20 drivers/net/tun.c:1784 tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6079: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:243 [inline] __kasan_slab_free+0x5b/0x80 mm/kasan/common.c:275 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2422 [inline] slab_free mm/slub.c:4695 [inline] kmem_cache_free+0x18f/0x400 mm/slub.c:4797 skb_pp_cow_data+0xdd8/0x13e0 net/core/skbuff.c:969 netif_skb_check_for_xdp net/core/dev.c:5390 [inline] netif_receive_generic_xdp net/core/dev.c:5431 [inline] do_xdp_generic+0x699/0x11a0 net/core/dev.c:5499 tun_get_user+0x2523/0x3e20 drivers/net/tun.c:1872 tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fAfter commit e6d5dbdd20aa ("xdp: add multi-buff support for xdp running ingeneric mode"), the original skb may be freed in skb_pp_cow_data() whenXDP program was attached, which was allocated in tun_napi_alloc_frags().However, the napi->skb still point to the original skb, update it afterXDP process.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflowSending an PF_PACKET allows to bypass the CAN framework logic and todirectly reach the xmit() function of a CAN driver. The only checkwhich is performed by the PF_PACKET framework is to make sure thatskb->len fits the interface's MTU.Unfortunately, because the mcba_usb driver does not populate itsnet_device_ops->ndo_change_mtu(), it is possible for an attacker toconfigure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999After doing so, the attacker could open a PF_PACKET socket using theETH_P_CANXL protocol: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))to inject a malicious CAN XL frames. For example: struct canxl_frame frame = { .flags = 0xff, .len = 2048, };The CAN drivers' xmit() function are calling can_dev_dropped_skb() tocheck that the skb is valid, unfortunately under above conditions, themalicious packet is able to go through can_dev_dropped_skb() checks: 1. the skb->protocol is set to ETH_P_CANXL which is valid (the function does not check the actual device capabilities). 2. the length is a valid CAN XL length.And so, mcba_usb_start_xmit() receives a CAN XL frame which it is notable to correctly handle and will thus misinterpret it as a CAN frame.This can result in a buffer overflow. The driver will consume cf->lenas-is with no further checks on these lines: usb_msg.dlc = cf->len; memcpy(usb_msg.data, cf->data, usb_msg.dlc);Here, cf->len corresponds to the flags field of the CAN XL frame. Inour previous example, we set canxl_frame->flags to 0xff. Because themaximum expected length is 8, a buffer overflow of 247 bytes occurs!Populate net_device_ops->ndo_change_mtu() to ensure that theinterface's MTU can not be set to anything bigger than CAN_MTU. Byfixing the root cause, this prevents the buffer overflow.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflowSending an PF_PACKET allows to bypass the CAN framework logic and todirectly reach the xmit() function of a CAN driver. The only checkwhich is performed by the PF_PACKET framework is to make sure thatskb->len fits the interface's MTU.Unfortunately, because the sun4i_can driver does not populate itsnet_device_ops->ndo_change_mtu(), it is possible for an attacker toconfigure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999After doing so, the attacker could open a PF_PACKET socket using theETH_P_CANXL protocol: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))to inject a malicious CAN XL frames. For example: struct canxl_frame frame = { .flags = 0xff, .len = 2048, };The CAN drivers' xmit() function are calling can_dev_dropped_skb() tocheck that the skb is valid, unfortunately under above conditions, themalicious packet is able to go through can_dev_dropped_skb() checks: 1. the skb->protocol is set to ETH_P_CANXL which is valid (the function does not check the actual device capabilities). 2. the length is a valid CAN XL length.And so, sun4ican_start_xmit() receives a CAN XL frame which it is notable to correctly handle and will thus misinterpret it as a CAN frame.This can result in a buffer overflow. The driver will consume cf->lenas-is with no further checks on this line: dlc = cf->len;Here, cf->len corresponds to the flags field of the CAN XL frame. Inour previous example, we set canxl_frame->flags to 0xff. Because themaximum expected length is 8, a buffer overflow of 247 bytes occurs acouple line below when doing: for (i = 0; i < dlc; i++) writel(cf->data[i], priv->base + (dreg + i * 4));Populate net_device_ops->ndo_change_mtu() to ensure that theinterface's MTU can not be set to anything bigger than CAN_MTU. Byfixing the root cause, this prevents the buffer overflow.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: hi311x: populate ndo_change_mtu() to prevent buffer overflowSending an PF_PACKET allows to bypass the CAN framework logic and todirectly reach the xmit() function of a CAN driver. The only checkwhich is performed by the PF_PACKET framework is to make sure thatskb->len fits the interface's MTU.Unfortunately, because the sun4i_can driver does not populate itsnet_device_ops->ndo_change_mtu(), it is possible for an attacker toconfigure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999After doing so, the attacker could open a PF_PACKET socket using theETH_P_CANXL protocol: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))to inject a malicious CAN XL frames. For example: struct canxl_frame frame = { .flags = 0xff, .len = 2048, };The CAN drivers' xmit() function are calling can_dev_dropped_skb() tocheck that the skb is valid, unfortunately under above conditions, themalicious packet is able to go through can_dev_dropped_skb() checks: 1. the skb->protocol is set to ETH_P_CANXL which is valid (the function does not check the actual device capabilities). 2. the length is a valid CAN XL length.And so, hi3110_hard_start_xmit() receives a CAN XL frame which it isnot able to correctly handle and will thus misinterpret it as a CANframe. The driver will consume frame->len as-is with no furtherchecks.This can result in a buffer overflow later on in hi3110_hw_tx() onthis line: memcpy(buf + HI3110_FIFO_EXT_DATA_OFF, frame->data, frame->len);Here, frame->len corresponds to the flags field of the CAN XL frame.In our previous example, we set canxl_frame->flags to 0xff. Becausethe maximum expected length is 8, a buffer overflow of 247 bytesoccurs!Populate net_device_ops->ndo_change_mtu() to ensure that theinterface's MTU can not be set to anything bigger than CAN_MTU. Byfixing the root cause, this prevents the buffer overflow.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: etas_es58x: populate ndo_change_mtu() to prevent buffer overflowSending an PF_PACKET allows to bypass the CAN framework logic and todirectly reach the xmit() function of a CAN driver. The only checkwhich is performed by the PF_PACKET framework is to make sure thatskb->len fits the interface's MTU.Unfortunately, because the etas_es58x driver does not populate itsnet_device_ops->ndo_change_mtu(), it is possible for an attacker toconfigure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999After doing so, the attacker could open a PF_PACKET socket using theETH_P_CANXL protocol: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL));to inject a malicious CAN XL frames. For example: struct canxl_frame frame = { .flags = 0xff, .len = 2048, };The CAN drivers' xmit() function are calling can_dev_dropped_skb() tocheck that the skb is valid, unfortunately under above conditions, themalicious packet is able to go through can_dev_dropped_skb() checks: 1. the skb->protocol is set to ETH_P_CANXL which is valid (the function does not check the actual device capabilities). 2. the length is a valid CAN XL length.And so, es58x_start_xmit() receives a CAN XL frame which it is notable to correctly handle and will thus misinterpret it as a CAN(FD)frame.This can result in a buffer overflow. For example, using the es581.4variant, the frame will be dispatched to es581_4_tx_can_msg(), gothrough the last check at the beginning of this function: if (can_is_canfd_skb(skb)) return -EMSGSIZE;and reach this line: memcpy(tx_can_msg->data, cf->data, cf->len);Here, cf->len corresponds to the flags field of the CAN XL frame. Inour previous example, we set canxl_frame->flags to 0xff. Because themaximum expected length is 8, a buffer overflow of 247 bytes occurs!Populate net_device_ops->ndo_change_mtu() to ensure that theinterface's MTU can not be set to anything bigger than CAN_MTU orCANFD_MTU (depending on the device capabilities). By fixing the rootcause, this prevents the buffer overflow.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()If ab->fw.m3_data points to data, then fw pointer remains null.Further, if m3_mem is not allocated, then fw is dereferenced to bepassed to ath11k_err function.Replace fw->size by m3_len.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: rc: fix races with imon_disconnect()Syzbot reports a KASAN issue as below:BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014Call Trace: __dump_stack lib/dump_stack.c:88 [inline]dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106print_address_description mm/kasan/report.c:317 [inline]print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433kasan_report+0xb1/0x1e0 mm/kasan/report.c:495__create_pipe include/linux/usb.h:1945 [inline]send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991vfs_write+0x2d7/0xdd0 fs/read_write.c:576ksys_write+0x127/0x250 fs/read_write.c:631do_syscall_x64 arch/x86/entry/common.c:50 [inline]do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80entry_SYSCALL_64_after_hwframe+0x63/0xcdThe iMON driver improperly releases the usb_device reference inimon_disconnect without coordinating with active users of thedevice.Specifically, the fields usbdev_intf0 and usbdev_intf1 are notprotected by the users counter (ictx->users). During probe,imon_init_intf0 or imon_init_intf1 increments the usb_devicereference count depending on the interface. However, duringdisconnect, usb_put_dev is called unconditionally, regardless ofactual usage.As a result, if vfd_write or other operations are still inprogress after disconnect, this can lead to a use-after-free ofthe usb_device pointer.Thread 1 vfd_write Thread 2 imon_disconnect ... if usb_put_dev(ictx->usbdev_intf0) else usb_put_dev(ictx->usbdev_intf1)...while send_packet if pipe = usb_sndintpipe( ictx->usbdev_intf0) UAF else pipe = usb_sndctrlpipe( ictx->usbdev_intf0, 0) UAFGuard access to usbdev_intf0 and usbdev_intf1 after disconnect bychecking ictx->disconnected in all writer paths. Add early returnwith -ENODEV in send_packet(), vfd_write(), lcd_write() anddisplay_open() if the device is no longer present.Set and read ictx->disconnected under ictx->lock to ensure memorysynchronization. Acquire the lock in imon_disconnect() before settingthe flag to synchronize with any ongoing operations.Ensure writers exit early and safely after disconnect before the USBcore proceeds with cleanup.Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: tuner: xc5000: Fix use-after-free in xc5000_releaseThe original code uses cancel_delayed_work() in xc5000_release(), whichdoes not guarantee that the delayed work item timer_sleep has fullycompleted if it was already running. This leads to use-after-free scenarioswhere xc5000_release() may free the xc5000_priv while timer_sleep is stillactive and attempts to dereference the xc5000_priv.A typical race condition is illustrated below:CPU 0 (release thread) | CPU 1 (delayed work callback)xc5000_release() | xc5000_do_timer_sleep() cancel_delayed_work() | hybrid_tuner_release_state(priv) | kfree(priv) | | priv = container_of() // UAFReplace cancel_delayed_work() with cancel_delayed_work_sync() to ensurethat the timer_sleep is properly canceled before the xc5000_priv memoryis deallocated.A deadlock concern was considered: xc5000_release() is called in a processcontext and is not holding any locks that the timer_sleep work item mightalso need. Therefore, the use of the _sync() variant is safe here.This bug was initially identified through static analysis.[hverkuil: fix typo in Subject: tunner -> tuner]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probeThe state->timer is a cyclic timer that schedules work_i2c_poll anddelayed_work_enable_hotplug, while rearming itself. Using timer_delete()fails to guarantee the timer isn't still running when destroyed, similarlycancel_delayed_work() cannot ensure delayed_work_enable_hotplug hasterminated if already executing. During probe failure after timerinitialization, these may continue running as orphans and reference thealready-freed tc358743_state object through tc358743_irq_poll_timer.The following is the trace captured by KASAN.BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0...Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ...Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7fFreed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f...Replace timer_delete() with timer_delete_sync() and cancel_delayed_work()with cancel_delayed_work_sync() to ensure proper termination of timer andwork items before resource cleanup.This bug was initially identified through static analysis. For reproductionand testing, I created a functional emulation of the tc358743 device via akernel module and introduced faults through the debugfs interface.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_removeThe original code uses cancel_delayed_work() in flexcop_pci_remove(), whichdoes not guarantee that the delayed work item irq_check_work has fullycompleted if it was already running. This leads to use-after-free scenarioswhere flexcop_pci_remove() may free the flexcop_device while irq_check_workis still active and attempts to dereference the device.A typical race condition is illustrated below:CPU 0 (remove) | CPU 1 (delayed work callback)flexcop_pci_remove() | flexcop_pci_irq_check_work() cancel_delayed_work() | flexcop_device_kfree(fc_pci->fc_dev) | | fc = fc_pci->fc_dev; // UAFThis is confirmed by a KASAN report:==================================================================BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0Write of size 8 at addr ffff8880093aa8c8 by task bash/135...Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ...Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x1be/0x460 flexcop_device_kmalloc+0x54/0xe0 flexcop_pci_probe+0x1f/0x9d0 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30Freed by task 135: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 flexcop_device_kfree+0x32/0x50 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f...Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensurethat the delayed work item is properly canceled and any executing delayedwork has finished before the device memory is deallocated.This bug was initially identified through static analysis. To reproduceand test it, I simulated the B2C2 FlexCop PCI device in QEMU and introducedartificial delays within the flexcop_pci_irq_check_work() function toincrease the likelihood of triggering the bug.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_freeThe previous commit 0718a78f6a9f ("ALSA: usb-audio: Kill timer properly atremoval") patched a UAF issue caused by the error timer.However, because the error timer kill added in this patch occurs after theendpoint delete, a race condition to UAF still occurs, albeit rarely.Additionally, since kill-cleanup for urb is also missing, freed memory canbe accessed in interrupt context related to urb, which can cause UAF.Therefore, to prevent this, error timer and urb must be killed beforefreeing the heap memory.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()There is a bug observed when rtw89_core_tx_kick_off_and_wait() tries toaccess already freed skb_data: BUG: KFENCE: use-after-free write in rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110 CPU: 6 UID: 0 PID: 41377 Comm: kworker/u64:24 Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025 Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] Use-after-free write at 0x0000000020309d9d (in kfence-#251): rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110 rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338 rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979 rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165 rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.h:141 rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012 rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059 rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758 process_one_work kernel/workqueue.c:3241 worker_thread kernel/workqueue.c:3400 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 kfence-#251: 0x0000000056e2393d-0x000000009943cb62, size=232, cache=skbuff_head_cache allocated by task 41377 on cpu 6 at 77869.159548s (0.009551s ago): __alloc_skb net/core/skbuff.c:659 __netdev_alloc_skb net/core/skbuff.c:734 ieee80211_nullfunc_get net/mac80211/tx.c:5844 rtw89_core_send_nullfunc drivers/net/wireless/realtek/rtw89/core.c:3431 rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338 rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979 rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165 rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.c:3194 rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012 rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059 rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758 process_one_work kernel/workqueue.c:3241 worker_thread kernel/workqueue.c:3400 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 freed by task 1045 on cpu 9 at 77869.168393s (0.001557s ago): ieee80211_tx_status_skb net/mac80211/status.c:1117 rtw89_pci_release_txwd_skb drivers/net/wireless/realtek/rtw89/pci.c:564 rtw89_pci_release_tx_skbs.isra.0 drivers/net/wireless/realtek/rtw89/pci.c:651 rtw89_pci_release_tx drivers/net/wireless/realtek/rtw89/pci.c:676 rtw89_pci_napi_poll drivers/net/wireless/realtek/rtw89/pci.c:4238 __napi_poll net/core/dev.c:7495 net_rx_action net/core/dev.c:7557 net/core/dev.c:7684 handle_softirqs kernel/softirq.c:580 do_softirq.part.0 kernel/softirq.c:480 __local_bh_enable_ip kernel/softirq.c:407 rtw89_pci_interrupt_threadfn drivers/net/wireless/realtek/rtw89/pci.c:927 irq_thread_fn kernel/irq/manage.c:1133 irq_thread kernel/irq/manage.c:1257 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258It is a consequence of a race between the waiting and the signaling sideof the completion: Waiting thread Completing threadrtw89_core_tx_kick_off_and_wait() rcu_assign_pointer(skb_data->wait, wait) /* start waiting */ wait_for_completion_timeout() rtw89_pci_tx_status() rtw89_core_tx_wait_complete() rcu_read_lock() /* signals completion and ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:afs: Fix potential null pointer dereference in afs_put_serverafs_put_server() accessed server->debug_id before the NULL check, whichcould lead to a null pointer dereference. Move the debug_id assignment,ensuring we never dereference a NULL server pointer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/gma500: Fix null dereference in hdmi teardownpci_set_drvdata sets the value of pdev->driver_data to NULL,after which the driver_data obtained from the same dev isdereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev isextracted from it. To prevent this, swap these calls.Found by Linux Verification Center (linuxtesting.org) with Svacer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: qcom: audioreach: fix potential null pointer dereferenceIt is possible that the topology parsing functionaudioreach_widget_load_module_common() could return NULL or an errorpointer. Add missing NULL check so that we do not dereference it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vhost: Take a reference on the task in struct vhost_task.vhost_task_create() creates a task and keeps a reference to itstask_struct. That task may exit early via a signal and its task_structwill be released.A pending vhost_task_wake() will then attempt to wake the task andaccess a task_struct which is no longer there.Acquire a reference on the task_struct while creating the thread andrelease the reference while the struct vhost_task itself is removed.If the task exits early due to a signal, then the vhost_task_wake() willstill access a valid task_struct. The wake is safe and will be skippedin this case.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bus: fsl-mc: Check return value of platform_get_resource()platform_get_resource() returns NULL in case of failure, so check itsreturn value and propagate the error in order to prevent NULL pointerdereference.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pinctrl: check the return value of pinmux_ops::get_function_name()While the API contract in docs doesn't specify it explicitly, thegeneric implementation of the get_function_name() callback from structpinmux_ops - pinmux_generic_get_function_name() - can fail and returnNULL. This is already checked in pinmux_check_ops() so add a similarcheck in pinmux_func_name_to_selector() instead of passing the returnedpointer right down to strcmp() where the NULL can get dereferenced. Thisis normal operation when adding new pinfunctions.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULLcheck, which could lead to a null pointer dereference. Move the pruassignment, ensuring we never dereference a NULL rproc pointer.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leakStruct ff_effect_compat is embedded twice insideuinput_ff_upload_compat, contains internal padding. In particular, thereis a hole after struct ff_replay to satisfy alignment requirements forthe following union member. Without clearing the structure,copy_to_user() may leak stack data to userspace.Initialize ff_up_compat to zero before filling valid fields.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:misc: fastrpc: fix possible map leak in fastrpc_put_argscopy_to_user() failure would cause an early return without cleaning upthe fdlist, which has been updated by the DSP. This could lead to mapleak. Fix this by redirecting to a cleanup path on failure, ensuringthat all mapped buffers are properly released before returning.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: simplefb: Fix use after free in simplefb_detach_genpds()The pm_domain cleanup can not be devres managed as it uses structsimplefb_par which is allocated within struct fb_info byframebuffer_alloc(). This allocation is explicitly freed byunregister_framebuffer() in simplefb_remove().Devres managed cleanup runs after the device remove call and thus can nolonger access struct simplefb_par.Call simplefb_detach_genpds() explicitly from simplefb_destroy() likethe cleanup functions for clocks and regulators.Fixes an use after free on M2 Mac mini duringaperture_remove_conflicting_devices() using the downstream asahi kernelwith Debian's kernel config. For unknown reasons this started toconsistently dereference an invalid pointer in v6.16.3 based kernels.[ 6.736134] BUG: KASAN: slab-use-after-free in simplefb_detach_genpds+0x58/0x220[ 6.743545] Read of size 4 at addr ffff8000304743f0 by task (udev-worker)/227[ 6.750697][ 6.752182] CPU: 6 UID: 0 PID: 227 Comm: (udev-worker) Tainted: G S 6.16.3-asahi+ #16 PREEMPTLAZY[ 6.752186] Tainted: [S]=CPU_OUT_OF_SPEC[ 6.752187] Hardware name: Apple Mac mini (M2, 2023) (DT)[ 6.752189] Call trace:[ 6.752190] show_stack+0x34/0x98 (C)[ 6.752194] dump_stack_lvl+0x60/0x80[ 6.752197] print_report+0x17c/0x4d8[ 6.752201] kasan_report+0xb4/0x100[ 6.752206] __asan_report_load4_noabort+0x20/0x30[ 6.752209] simplefb_detach_genpds+0x58/0x220[ 6.752213] devm_action_release+0x50/0x98[ 6.752216] release_nodes+0xd0/0x2c8[ 6.752219] devres_release_all+0xfc/0x178[ 6.752221] device_unbind_cleanup+0x28/0x168[ 6.752224] device_release_driver_internal+0x34c/0x470[ 6.752228] device_release_driver+0x20/0x38[ 6.752231] bus_remove_device+0x1b0/0x380[ 6.752234] device_del+0x314/0x820[ 6.752238] platform_device_del+0x3c/0x1e8[ 6.752242] platform_device_unregister+0x20/0x50[ 6.752246] aperture_detach_platform_device+0x1c/0x30[ 6.752250] aperture_detach_devices+0x16c/0x290[ 6.752253] aperture_remove_conflicting_devices+0x34/0x50...[ 6.752343][ 6.967409] Allocated by task 62:[ 6.970724] kasan_save_stack+0x3c/0x70[ 6.974560] kasan_save_track+0x20/0x40[ 6.978397] kasan_save_alloc_info+0x40/0x58[ 6.982670] __kasan_kmalloc+0xd4/0xd8[ 6.986420] __kmalloc_noprof+0x194/0x540[ 6.990432] framebuffer_alloc+0xc8/0x130[ 6.994444] simplefb_probe+0x258/0x2378...[ 7.054356][ 7.055838] Freed by task 227:[ 7.058891] kasan_save_stack+0x3c/0x70[ 7.062727] kasan_save_track+0x20/0x40[ 7.066565] kasan_save_free_info+0x4c/0x80[ 7.070751] __kasan_slab_free+0x6c/0xa0[ 7.074675] kfree+0x10c/0x380[ 7.077727] framebuffer_release+0x5c/0x90[ 7.081826] simplefb_destroy+0x1b4/0x2c0[ 7.085837] put_fb_info+0x98/0x100[ 7.089326] unregister_framebuffer+0x178/0x320[ 7.093861] simplefb_remove+0x3c/0x60[ 7.097611] platform_remove+0x60/0x98[ 7.101361] device_remove+0xb8/0x160[ 7.105024] device_release_driver_internal+0x2fc/0x470[ 7.110256] device_release_driver+0x20/0x38[ 7.114529] bus_remove_device+0x1b0/0x380[ 7.118628] device_del+0x314/0x820[ 7.122116] platform_device_del+0x3c/0x1e8[ 7.126302] platform_device_unregister+0x20/0x50[ 7.131012] aperture_detach_platform_device+0x1c/0x30[ 7.136157] aperture_detach_devices+0x16c/0x290[ 7.140779] aperture_remove_conflicting_devices+0x34/0x50...
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SVM: Skip fastpath emulation on VM-Exit if next RIP isn't validSkip the WRMSR and HLT fastpaths in SVM's VM-Exit handler if the next RIPisn't valid, e.g. because KVM is running with nrips=false. SVM mustdecode and emulate to skip the instruction if the CPU doesn't provide thenext RIP, and getting the instruction bytes to decode requires readingguest memory. Reading guest memory through the emulator can fault, i.e.can sleep, which is disallowed since the fastpath handlers run with IRQsdisabled. BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:106 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 32611, name: qemu preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 30580 hardirqs last enabled at (30579): [] vcpu_run+0x1787/0x1db0 [kvm] hardirqs last disabled at (30580): [] __schedule+0x1e2/0xed0 softirqs last enabled at (30570): [] fpu_swap_kvm_fpstate+0x44/0x210 softirqs last disabled at (30568): [] fpu_swap_kvm_fpstate+0x44/0x210 CPU: 298 UID: 0 PID: 32611 Comm: qemu Tainted: G U 6.16.0-smp--e6c618b51cfe-sleep #782 NONE Tainted: [U]=USER Hardware name: Google Astoria-Turin/astoria, BIOS 0.20241223.2-0 01/17/2025 Call Trace: dump_stack_lvl+0x7d/0xb0 __might_resched+0x271/0x290 __might_fault+0x28/0x80 kvm_vcpu_read_guest_page+0x8d/0xc0 [kvm] kvm_fetch_guest_virt+0x92/0xc0 [kvm] __do_insn_fetch_bytes+0xf3/0x1e0 [kvm] x86_decode_insn+0xd1/0x1010 [kvm] x86_emulate_instruction+0x105/0x810 [kvm] __svm_skip_emulated_instruction+0xc4/0x140 [kvm_amd] handle_fastpath_invd+0xc4/0x1a0 [kvm] vcpu_run+0x11a1/0x1db0 [kvm] kvm_arch_vcpu_ioctl_run+0x5cc/0x730 [kvm] kvm_vcpu_ioctl+0x578/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x8a/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f479d57a94b Note, this is essentially a reapply of commit 5c30e8101e8d ("KVM: SVM:Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"), but withdifferent justification (KVM now grabs SRCU when skipping the instructionfor other reasons).
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/ksm: fix flag-dropping behavior in ksm_madvisesyzkaller discovered the following crash: (kernel BUG)[ 44.607039] ------------[ cut here ]------------[ 44.607422] kernel BUG at mm/userfaultfd.c:2067![ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460[ 44.617726] Call Trace:[ 44.617926] [ 44.619284] userfaultfd_release+0xef/0x1b0[ 44.620976] __fput+0x3f9/0xb60[ 44.621240] fput_close_sync+0x110/0x210[ 44.622222] __x64_sys_close+0x8f/0x120[ 44.622530] do_syscall_64+0x5b/0x2f0[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e[ 44.623244] RIP: 0033:0x7f365bb3f227Kernel panics because it detects UFFD inconsistency duringuserfaultfd_release_all(). Specifically, a VMA which has a valid pointerto vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.The inconsistency is caused in ksm_madvise(): when user calls madvise()with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,it accidentally clears all flags stored in the upper 32 bits ofvma->vm_flags.Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int andint are 32-bit wide. This setup causes the following mishap during the &=~VM_MERGEABLE assignment.VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is thenpromoted to unsigned long before the & operation. This promotion fillsupper 32 bits with leading 0s, as we're doing unsigned conversion (andeven for a signed conversion, this wouldn't help as the leading bit is 0).& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffffinstead of intended 0xffff'ffff'7fff'ffff and hence accidentally clearsthe upper 32-bits of its value.Fix it by changing `VM_MERGEABLE` constant to unsigned long, using theBIT() macro.Note: other VM_* flags are not affected: This only happens to theVM_MERGEABLE flag, as the other VM_* flags are all constants of type intand after ~ operation, they end up with leading 1 and are thus convertedto unsigned long with leading 1s.Note 2:After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this isno longer a kernel BUG, but a WARNING at the same place:[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067but the root-cause (flag-drop) remains the same.[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Fix race condition in kprobe initialization causing NULL pointer dereferenceThere is a critical race condition in kprobe initialization that can lead toNULL pointer dereference and kernel crash.[1135630.084782] Unable to handle kernel paging request at virtual address 0000710a04630000...[1135630.260314] pstate: 404003c9 (nZcv DAIF +PAN -UAO)[1135630.269239] pc : kprobe_perf_func+0x30/0x260[1135630.277643] lr : kprobe_dispatcher+0x44/0x60[1135630.286041] sp : ffffaeff4977fa40[1135630.293441] x29: ffffaeff4977fa40 x28: ffffaf015340e400[1135630.302837] x27: 0000000000000000 x26: 0000000000000000[1135630.312257] x25: ffffaf029ed108a8 x24: ffffaf015340e528[1135630.321705] x23: ffffaeff4977fc50 x22: ffffaeff4977fc50[1135630.331154] x21: 0000000000000000 x20: ffffaeff4977fc50[1135630.340586] x19: ffffaf015340e400 x18: 0000000000000000[1135630.349985] x17: 0000000000000000 x16: 0000000000000000[1135630.359285] x15: 0000000000000000 x14: 0000000000000000[1135630.368445] x13: 0000000000000000 x12: 0000000000000000[1135630.377473] x11: 0000000000000000 x10: 0000000000000000[1135630.386411] x9 : 0000000000000000 x8 : 0000000000000000[1135630.395252] x7 : 0000000000000000 x6 : 0000000000000000[1135630.403963] x5 : 0000000000000000 x4 : 0000000000000000[1135630.412545] x3 : 0000710a04630000 x2 : 0000000000000006[1135630.421021] x1 : ffffaeff4977fc50 x0 : 0000710a04630000[1135630.429410] Call trace:[1135630.434828] kprobe_perf_func+0x30/0x260[1135630.441661] kprobe_dispatcher+0x44/0x60[1135630.448396] aggr_pre_handler+0x70/0xc8[1135630.454959] kprobe_breakpoint_handler+0x140/0x1e0[1135630.462435] brk_handler+0xbc/0xd8[1135630.468437] do_debug_exception+0x84/0x138[1135630.475074] el1_dbg+0x18/0x8c[1135630.480582] security_file_permission+0x0/0xd0[1135630.487426] vfs_write+0x70/0x1c0[1135630.493059] ksys_write+0x5c/0xc8[1135630.498638] __arm64_sys_write+0x24/0x30[1135630.504821] el0_svc_common+0x78/0x130[1135630.510838] el0_svc_handler+0x38/0x78[1135630.516834] el0_svc+0x8/0x1b0kernel/trace/trace_kprobe.c: 13080xffff3df8995039ec : ldr x21, [x24,#120]include/linux/compiler.h: 2940xffff3df8995039f0 : ldr x1, [x21,x0]kernel/trace/trace_kprobe.c1308: head = this_cpu_ptr(call->perf_events);1309: if (hlist_empty(head))1310: return 0;crash> struct trace_event_call -ostruct trace_event_call { ... [120] struct hlist_head *perf_events; //(call->perf_event) ...}crash> struct trace_event_call ffffaf015340e528struct trace_event_call { ... perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0 ...}Race Condition Analysis:The race occurs between kprobe activation and perf_events initialization: CPU0 CPU1 ==== ==== perf_kprobe_init perf_trace_event_init tp_event->perf_events = list;(1) tp_event->class->reg (2)<- KPROBE ACTIVE Debug exception triggers ... kprobe_dispatcher kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE) head = this_cpu_ptr(call->perf_events)(3) (perf_events is still NULL)Problem:1. CPU0 executes (1) assigning tp_event->perf_events = list2. CPU0 executes (2) enabling kprobe functionality via class->reg()3. CPU1 triggers and reaches kprobe_dispatcher4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)5. CPU1 calls kprobe_perf_func() and crashes at (3) because call->perf_events is still NULLCPU1 sees that kprobe functionality is enabled but does not see thatperf_events has been assigned.Add pairing read an---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:uio_hv_generic: Let userspace take care of interrupt maskRemove the logic to set interrupt mask by default in uio_hv_genericdriver as the interrupt mask value is supposed to be controlledcompletely by the user space. If the mask bit gets changedby the driver, concurrently with user mode operating on the ring,the mask bit may be set when it is supposed to be clear, and theuser-mode driver will miss an interrupt which will cause a hang.For eg- when the driver sets inbound ring buffer interrupt mask to 1,the host does not interrupt the guest on the UIO VMBus channel.However, setting the mask does not prevent the host from putting amessage in the inbound ring buffer. So let's assume that happens,the host puts a message into the ring buffer but does not interrupt.Subsequently, the user space code in the guest sets the inbound ringbuffer interrupt mask to 0, saying "Hey, I'm ready for interrupts".User space code then calls pread() to wait for an interrupt.Then one of two things happens:* The host never sends another message. So the pread() waits forever.* The host does send another message. But because there's already a message in the ring buffer, it doesn't generate an interrupt. This is the correct behavior, because the host should only send an interrupt when the inbound ring buffer transitions from empty to not-empty. Adding an additional message to a ring buffer that is not empty is not supposed to generate an interrupt on the guest. Since the guest is waiting in pread() and not removing messages from the ring buffer, the pread() waits forever.This could be easily reproduced in hv_fcopy_uio_daemon if we delaysetting interrupt mask to 0.Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1,there's a race condition. Once user space empties the inbound ringbuffer, but before user space sets interrupt_mask to 0, the host couldput another message in the ring buffer but it wouldn't interrupt.Then the next pread() would hang.Fix these by removing all instances where interrupt_mask is changed,while keeping the one in set_event() unchanged to enable userspacecontrol the interrupt mask by writing 0/1 to /dev/uioX.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vhost: vringh: Modify the return value checkThe return value of copy_from_iter and copy_to_iter can't be negative,check whether the copied lengths are equal.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix crypto buffers in non-linear memoryThe crypto API, through the scatterlist API, expects input buffers to bein linear memory. We handle this with the cifs_sg_set_buf() helperthat converts vmalloc'd memory to their corresponding pages.However, when we allocate our aead_request buffer (@creq insmb2ops.c::crypt_message()), we do so with kvzalloc(), which possiblyputs aead_request->__ctx in vmalloc area.AEAD algorithm then uses ->__ctx for its private/internal data andoperations, and uses sg_set_buf() for such data on a few places.This works fine as long as @creq falls into kmalloc zone (smallrequests) or vmalloc'd memory is still within linear range.Tasks' stacks are vmalloc'd by default (CONFIG_VMAP_STACK=y), so toomany tasks will increment the base stacks' addresses to a point wherevirt_addr_valid(buf) will fail (BUG() in sg_set_buf()) when thathappens.In practice: too many parallel reads and writes on an encrypted mountwill trigger this bug.To fix this, always alloc @creq with kmalloc() instead.Also drop the @sensitive_size variable/arguments sincekfree_sensitive() doesn't need it.Backtrace:[ 945.272081] ------------[ cut here ]------------[ 945.272774] kernel BUG at include/linux/scatterlist.h:209![ 945.273520] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI[ 945.274412] CPU: 7 UID: 0 PID: 56 Comm: kworker/u33:0 Kdump: loaded Not tainted 6.15.0-lku-11779-g8e9d6efccdd7-dirty #1 PREEMPT(voluntary)[ 945.275736] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014[ 945.276877] Workqueue: writeback wb_workfn (flush-cifs-2)[ 945.277457] RIP: 0010:crypto_gcm_init_common+0x1f9/0x220[ 945.278018] Code: b0 00 00 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 c7 c0 00 00 00 80 48 2b 05 5c 58 e5 00 e9 58 ff ff ff <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 48 c7 04 24 01 00 00 00 48 8b[ 945.279992] RSP: 0018:ffffc90000a27360 EFLAGS: 00010246[ 945.280578] RAX: 0000000000000000 RBX: ffffc90001d85060 RCX: 0000000000000030[ 945.281376] RDX: 0000000000080000 RSI: 0000000000000000 RDI: ffffc90081d85070[ 945.282145] RBP: ffffc90001d85010 R08: ffffc90001d85000 R09: 0000000000000000[ 945.282898] R10: ffffc90001d85090 R11: 0000000000001000 R12: ffffc90001d85070[ 945.283656] R13: ffff888113522948 R14: ffffc90001d85060 R15: ffffc90001d85010[ 945.284407] FS: 0000000000000000(0000) GS:ffff8882e66cf000(0000) knlGS:0000000000000000[ 945.285262] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 945.285884] CR2: 00007fa7ffdd31f4 CR3: 000000010540d000 CR4: 0000000000350ef0[ 945.286683] Call Trace:[ 945.286952] [ 945.287184] ? crypt_message+0x33f/0xad0 [cifs][ 945.287719] crypto_gcm_encrypt+0x36/0xe0[ 945.288152] crypt_message+0x54a/0xad0 [cifs][ 945.288724] smb3_init_transform_rq+0x277/0x300 [cifs][ 945.289300] smb_send_rqst+0xa3/0x160 [cifs][ 945.289944] cifs_call_async+0x178/0x340 [cifs][ 945.290514] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs][ 945.291177] smb2_async_writev+0x3e3/0x670 [cifs][ 945.291759] ? find_held_lock+0x32/0x90[ 945.292212] ? netfs_advance_write+0xf2/0x310[ 945.292723] netfs_advance_write+0xf2/0x310[ 945.293210] netfs_write_folio+0x346/0xcc0[ 945.293689] ? __pfx__raw_spin_unlock_irq+0x10/0x10[ 945.294250] netfs_writepages+0x117/0x460[ 945.294724] do_writepages+0xbe/0x170[ 945.295152] ? find_held_lock+0x32/0x90[ 945.295600] ? kvm_sched_clock_read+0x11/0x20[ 945.296103] __writeback_single_inode+0x56/0x4b0[ 945.296643] writeback_sb_inodes+0x229/0x550[ 945.297140] __writeback_inodes_wb+0x4c/0xe0[ 945.297642] wb_writeback+0x2f1/0x3f0[ 945.298069] wb_workfn+0x300/0x490[ 945.298472] process_one_work+0x1fe/0x590[ 945.298949] worker_thread+0x1ce/0x3c0[ 945.299397] ? __pfx_worker_thread+0x10/0x10[ 945.299900] kthr---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: dlink: handle copy_thresh allocation failureThe driver did not handle failure of `netdev_alloc_skb_ip_align()`.If the allocation failed, dereferencing `skb->protocol` could lead toa NULL pointer dereference.This patch tries to allocate `skb`. If the allocation fails, it fallsback to the normal path.Tested-on: D-Link DGE-550T Rev-A3
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: fix double free in user_cluster_connect()user_cluster_disconnect() frees "conn->cc_private" which is "lc" but thenthe error handling frees "lc" a second time. Set "lc" to NULL on thispath to avoid a double free.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: Disallow dirty tracking if incoherent page walkDirty page tracking relies on the IOMMU atomically updating the dirty bitin the paging-structure entry. For this operation to succeed, the paging-structure memory must be coherent between the IOMMU and the CPU. Inanother word, if the iommu page walk is incoherent, dirty page trackingdoesn't work.The Intel VT-d specification, Section 3.10 "Snoop Behavior" states:"Remapping hardware encountering the need to atomically update A/EA/D bits in a paging-structure entry that is not snooped will result in a non- recoverable fault."To prevent an IOMMU from being incorrectly configured for dirty pagetracking when it is operating in an incoherent mode, mark SSADS assupported only when both ecap_slads and ecap_smpwc are supported.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:coresight: Fix incorrect handling for return value of devm_kzallocThe return value of devm_kzalloc could be an null pointer,use "!desc.pdata" to fix incorrect handling return valueof devm_kzalloc.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:coresight: trbe: Return NULL pointer for allocation failuresWhen the TRBE driver fails to allocate a buffer, it currently returnsthe error code "-ENOMEM". However, the caller etm_setup_aux() onlychecks for a NULL pointer, so it misses the error. As a result, thedriver continues and eventually causes a kernel panic.Fix this by returning a NULL pointer from arm_trbe_alloc_buffer() onallocation failures. This allows that the callers can properly handlethe failure.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Fix race in do_task() when drainingWhen do_task() exhausts its iteration budget (!ret), it sets the stateto TASK_STATE_IDLE to reschedule, without a secondary check on thecurrent task->state. This can overwrite the TASK_STATE_DRAINING stateset by a concurrent call to rxe_cleanup_task() or rxe_disable_task().While state changes are protected by a spinlock, both rxe_cleanup_task()and rxe_disable_task() release the lock while waiting for the task tofinish draining in the while(!is_done(task)) loop. The race occurs ifdo_task() hits its iteration limit and acquires the lock in this window.The cleanup logic may then proceed while the task incorrectlyreschedules itself, leading to a potential use-after-free.This bug was introduced during the migration from tasklets to workqueues,where the special handling for the draining case was lost.Fix this by restoring the original pre-migration behavior. If the state isTASK_STATE_DRAINING when iterations are exhausted, set cont to 1 toforce a new loop iteration. This allows the task to finish its work, sothat a subsequent iteration can reach the switch statement and correctlytransition the state to TASK_STATE_DRAINED, stopping the task as intended.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regsWhen the initialization of qm->debug.acc_diff_reg fails,the probe process does not exit. However, after qm->debug.qm_diff_regs isfreed, it is not set to NULL. This can lead to a double free when theremove process attempts to free it again. Therefore, qm->debug.qm_diff_regsshould be set to NULL after it is freed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smc: Fix use-after-free in __pnet_find_base_ndev().syzbot reported use-after-free of net_device in __pnet_find_base_ndev(),which was called during connect(). [0]smc_pnet_find_ism_resource() fetches sk_dst_get(sk)->dev and passesdown to pnet_find_base_ndev(), where RTNL is held. Then, UAF happenedat __pnet_find_base_ndev() when the dev is first used.This means dev had already been freed before acquiring RTNL inpnet_find_base_ndev().While dev is going away, dst->dev could be swapped with blackhole_netdev,and the dev's refcnt by dst will be released.We must hold dev's refcnt before calling smc_pnet_find_ism_resource().Also, smc_pnet_find_roce_resource() has the same problem.Let's use __sk_dst_get() and dst_dev_rcu() in the two functions.[0]:BUG: KASAN: use-after-free in __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926Read of size 1 at addr ffff888036bac33a by task syz.0.3632/18609CPU: 1 UID: 0 PID: 18609 Comm: syz.0.3632 Not tainted syzkaller #0 PREEMPT(full)Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926 pnet_find_base_ndev net/smc/smc_pnet.c:946 [inline] smc_pnet_find_ism_by_pnetid net/smc/smc_pnet.c:1103 [inline] smc_pnet_find_ism_resource+0xef/0x390 net/smc/smc_pnet.c:1154 smc_find_ism_device net/smc/af_smc.c:1030 [inline] smc_find_proposal_devices net/smc/af_smc.c:1115 [inline] __smc_connect+0x372/0x1890 net/smc/af_smc.c:1545 smc_connect+0x877/0xd90 net/smc/af_smc.c:1715 __sys_connect_file net/socket.c:2086 [inline] __sys_connect+0x313/0x440 net/socket.c:2105 __do_sys_connect net/socket.c:2111 [inline] __se_sys_connect net/socket.c:2108 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2108 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f47cbf8eba9Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007f47ccdb1038 EFLAGS: 00000246 ORIG_RAX: 000000000000002aRAX: ffffffffffffffda RBX: 00007f47cc1d5fa0 RCX: 00007f47cbf8eba9RDX: 0000000000000010 RSI: 0000200000000280 RDI: 000000000000000bRBP: 00007f47cc011e19 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000R13: 00007f47cc1d6038 R14: 00007f47cc1d5fa0 R15: 00007ffc512f8aa8 The buggy address belongs to the physical page:page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888036bacd00 pfn:0x36bacflags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)raw: 00fff00000000000 ffffea0001243d08 ffff8880b863fdc0 0000000000000000raw: ffff888036bacd00 0000000000000000 00000000ffffffff 0000000000000000page dumped because: kasan: bad access detectedpage_owner tracks the page as freedpage last allocated via order 2, migratetype Unmovable, gfp_mask 0x446dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), pid 16741, tgid 16741 (syz-executor), ts 343313197788, free_ts 380670750466 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851 prep_new_page mm/page_alloc.c:1859 [inline] get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858 __alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5148 alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2416 ___kmalloc_large_node+0x5f/0x1b0 mm/slub.c:4317 __kmalloc_large_node_noprof+0x18/0x90 mm/slub.c:4348 __do_kmalloc_node mm/slub.c:4364 [inline] __kvmalloc_node---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pps: fix warning in pps_register_cdev when register device failSimilar to previous commit 2a934fdb01db ("media: v4l2-dev: fix errorhandling in __video_register_device()"), the release hook should be setbefore device_register(). Otherwise, when device_register() return errorand put_device() try to callback the release function, the below warningmay happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567 Modules linked in: CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567 Call Trace: kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0xe9/0x130 lib/kobject.c:737 put_device+0x24/0x30 drivers/base/core.c:3797 pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402 pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108 pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57 tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432 tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563 tiocsetd drivers/tty/tty_io.c:2429 [inline] tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e Before commit c79a39dc8d06 ("pps: Fix a use-after-free"),pps_register_cdev() call device_create() to create pps->dev, which willinit dev->release to device_create_release(). Now the comment is outdated,just remove it.Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removedin pps_register_source() to avoid a double free in the failure case.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tty: n_gsm: Don't block input queue by waiting MSCCurrently gsm_queue() processes incoming frames and when openinga DLC channel it calls gsm_dlci_open() which calls gsm_modem_update().If basic mode is used it calls gsm_modem_upd_via_msc() and itcannot block the input queue by waiting the response to comeinto the same input queue.Instead allow sending Modem Status Command without waiting for remoteend to respond. Define a new function gsm_modem_send_initial_msc()for this purpose. As MSC is only valid for basic encoding, it doesnot do anything for advanced or when convergence layer type 2 is used.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: start using dst_dev_rcu()Change icmpv4_xrlim_allow(), ip_defrag() to prevent possible UAF.Change ipmr_prepare_xmit(), ipmr_queue_fwd_xmit(), ip_mr_output(),ipv4_neigh_lookup() to use lockdep enabled dst_dev_rcu().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tcp_metrics: use dst_dev_net_rcu()Replace three dst_dev() with a lockdep enabled helper.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Explicitly check accesses to bpf_sock_addrSyzkaller found a kernel warning on the following sock_addr program: 0: r0 = 0 1: r2 = *(u32 *)(r1 +60) 2: exitwhich triggers: verifier bug: error during ctx access conversion (0)This is happening because offset 60 in bpf_sock_addr corresponds to animplicit padding of 4 bytes, right after msg_src_ip4. Access to thispadding isn't rejected in sock_addr_is_valid_access and it thus laterfails to convert the access.This patch fixes it by explicitly checking the various fields ofbpf_sock_addr in sock_addr_is_valid_access.I checked the other ctx structures and is_valid_access functions anddidn't find any other similar cases. Other cases of (properly handled)padding are covered in new tests in a subsequent patch.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nbd: restrict sockets to TCP and UDPRecently, syzbot started to abuse NBD with all kinds of sockets.Commit cf1b2326b734 ("nbd: verify socket is supported during setup")made sure the socket supported a shutdown() method.Explicitely accept TCP and UNIX stream sockets.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:perf: arm_spe: Prevent overflow in PERF_IDX2OFF()Cast nr_pages to unsigned long to avoid overflow when handling largeAUX buffer sizes (>= 2 GiB).
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186Read of size 2 at addr ffff8880289ef218 by task syz.6.248/14290CPU: 0 UID: 0 PID: 14290 Comm: syz.6.248 Not tainted 6.16.4 #1 PREEMPT(full)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x5f0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186 hfsplus_listxattr+0x5b6/0xbd0 fs/hfsplus/xattr.c:738 vfs_listxattr+0xbe/0x140 fs/xattr.c:493 listxattr+0xee/0x190 fs/xattr.c:924 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x143/0x360 fs/xattr.c:988 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7fe0e9fae16dCode: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48RSP: 002b:00007fe0eae67f98 EFLAGS: 00000246 ORIG_RAX: 00000000000000c3RAX: ffffffffffffffda RBX: 00007fe0ea205fa0 RCX: 00007fe0e9fae16dRDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000000RBP: 00007fe0ea0480f0 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000R13: 00007fe0ea206038 R14: 00007fe0ea205fa0 R15: 00007fe0eae48000 Allocated by task 14290: kasan_save_stack+0x24/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4333 [inline] __kmalloc_noprof+0x219/0x540 mm/slub.c:4345 kmalloc_noprof include/linux/slab.h:909 [inline] hfsplus_find_init+0x95/0x1f0 fs/hfsplus/bfind.c:21 hfsplus_listxattr+0x331/0xbd0 fs/hfsplus/xattr.c:697 vfs_listxattr+0xbe/0x140 fs/xattr.c:493 listxattr+0xee/0x190 fs/xattr.c:924 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x143/0x360 fs/xattr.c:988 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fWhen hfsplus_uni2asc is called from hfsplus_listxattr,it actually passes in a struct hfsplus_attr_unistr*.The size of the corresponding structure is different from that of hfsplus_unistr,so the previous fix (94458781aee6) is insufficient.The pointer on the unicode buffer is still going beyond the allocated memory.This patch introduces two warpper functions hfsplus_uni2asc_xattr_str andhfsplus_uni2asc_str to process two unicode buffers,struct hfsplus_attr_unistr* and struct hfsplus_unistr* respectively.When ustrlen value is bigger than the allocated memory size,the ustrlen value is limited to an safe size.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_qfq: Fix null-deref in agg_dequeueTo prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the returnvalue before using it, similar to the existing approach in sch_hfsc.c.To avoid code duplication, the following changes are made:1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a staticinline function.2. Moved qdisc_peek_len from net/sched/sch_hfsc.c toinclude/net/pkt_sched.h so that sch_qfq can reuse it.3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFSD: Define a proc_layoutcommit for the FlexFiles layout typeAvoid a crash if a pNFS client should happen to send a LAYOUTCOMMIToperation on a FlexFiles layout.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_ncm: Refactor bind path to use __free()After an bind/unbind cycle, the ncm->notify_req is left stale. If asubsequent bind fails, the unified error label attempts to free thisstale request, leading to a NULL pointer dereference when accessingep->ops->free_request.Refactor the error handling in the bind path to use the __free()automatic cleanup mechanism.Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020Call trace: usb_ep_free_request+0x2c/0xec ncm_bind+0x39c/0x3dc usb_add_function+0xcc/0x1f0 configfs_composite_bind+0x468/0x588 gadget_bind_driver+0x104/0x270 really_probe+0x190/0x374 __driver_probe_device+0xa0/0x12c driver_probe_device+0x3c/0x218 __device_attach_driver+0x14c/0x188 bus_for_each_drv+0x10c/0x168 __device_attach+0xfc/0x198 device_initial_probe+0x14/0x24 bus_probe_device+0x94/0x11c device_add+0x268/0x48c usb_add_gadget+0x198/0x28c dwc3_gadget_init+0x700/0x858 __dwc3_set_mode+0x3cc/0x664 process_scheduled_works+0x1d8/0x488 worker_thread+0x244/0x334 kthread+0x114/0x1bc ret_from_fork+0x10/0x20
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: f_ecm: Refactor bind path to use __free()After an bind/unbind cycle, the ecm->notify_req is left stale. If asubsequent bind fails, the unified error label attempts to free thisstale request, leading to a NULL pointer dereference when accessingep->ops->free_request.Refactor the error handling in the bind path to use the __free()automatic cleanup mechanism.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: hda: Fix missing pointer check in hda_component_manager_init functionThe __component_match_add function may assign the 'matchptr' pointerthe value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.The call stack leading to the error looks like this:hda_component_manager_init|-> component_match_add |-> component_match_add_release |-> __component_match_add ( ... ,**matchptr, ... ) |-> *matchptr = ERR_PTR(-ENOMEM); // assign|-> component_master_add_with_match( ... match) |-> component_match_realloc(match, match->num); // dereferenceAdd IS_ERR() check to prevent the crash.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_get_acpi_mute_state()Return value of a function acpi_evaluate_dsm() is dereferenced withoutchecking for NULL, but it is usually checked for this function.acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returnsacpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: do not assert we found block group item when creating free space treeCurrently, when building a free space tree at populate_free_space_tree(),if we are not using the block group tree feature, we always expect to findblock group items (either extent items or a block group item with key typeBTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree withbtrfs_search_slot_for_read(), so we assert that we found an item. Howeverthis expectation is wrong since we can have a new block group created inthe current transaction which is still empty and for which we still havenot added the block group's item to the extent tree, in which case we donot have any items in the extent tree associated to the block group.The insertion of a new block group's block group item in the extent treehappens at btrfs_create_pending_block_groups() when it calls the helperinsert_block_group_item(). This typically is done when a transactionhandle is released, committed or when running delayed refs (either aspart of a transaction commit or when serving tickets for space reservationif we are low on free space).So remove the assertion at populate_free_space_tree() even when the blockgroup tree feature is not enabled and update the comment to mention thiscase.Syzbot reported this with the following stack trace: BTRFS info (device loop3 state M): rebuilding free space tree assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1115! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115 Code: ff ff e8 d3 (...) RSP: 0018:ffffc9000430f780 EFLAGS: 00010246 RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94 R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001 R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0 Call Trace: btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364 btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062 btrfs_remount_rw fs/btrfs/super.c:1334 [inline] btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559 reconfigure_super+0x227/0x890 fs/super.c:1076 do_remount fs/namespace.c:3279 [inline] path_mount+0xd1a/0xfe0 fs/namespace.c:4027 do_mount fs/namespace.c:4048 [inline] __do_sys_mount fs/namespace.c:4236 [inline] __se_sys_mount+0x313/0x410 fs/namespace.c:4213 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f424e39066a Code: d8 64 89 02 (...) RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000 RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020 R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380 R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0 Modules linked in: ---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:comedi: fix divide-by-zero in comedi_buf_munge()The comedi_buf_munge() function performs a modulo operation`async->munge_chan %= async->cmd.chanlist_len` without firstchecking if chanlist_len is zero. If a user program submits a command withchanlist_len set to zero, this causes a divide-by-zero error when the deviceprocesses data in the interrupt handler path.Add a check for zero chanlist_len at the beginning of thefunction, similar to the existing checks for !map andCMDF_RAWDATA flag. When chanlist_len is zero, updatemunge_count and return early, indicating the data washandled without munging.This prevents potential kernel panics from malformed user commands.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabledThis issue is similar to the vulnerability in the `mcp251x` driver,which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume fromsleep before interface was brought up").In the `hi311x` driver, when the device resumes from sleep, the driverschedules `priv->restart_work`. However, if the network interface wasnot previously enabled, the `priv->wq` (workqueue) is not allocated andinitialized, leading to a null pointer dereference.To fix this, we move the allocation and initialization of the workqueuefrom the `hi3110_open` function to the `hi3110_can_probe` function.This ensures that the workqueue is properly initialized before it isused during device resume. And added logic to destroy the workqueuein the error handling paths of `hi3110_can_probe` and in the`hi3110_can_remove` function to prevent resource leaks.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: rng - Ensure set_ent is always presentEnsure that set_ent is always set since only drbg provides it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()During mpt3sas_transport_port_remove(), messages were logged withdev_printk() against &mpt3sas_port->port->dev. At this point the SAStransport device may already be partially unregistered or freed, leadingto a crash when accessing its struct device.Using ioc_info(), which logs via the PCI device (ioc->pdev->dev),guaranteed to remain valid until driver removal.[83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI[83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary)[83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE[83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024[83428.295799] RIP: 0010:__dev_printk+0x1f/0x70[83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff[83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206[83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32[83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845[83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8[83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000[83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30[83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000[83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0[83428.295844] PKRU: 55555554[83428.295846] Call Trace:[83428.295848] [83428.295850] _dev_printk+0x5c/0x80[83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5[83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas][83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas][83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas][83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5[83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas][83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas][83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas][83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas][83428.295957] pci_device_remove+0x3b/0xb0[83428.295962] device_release_driver_internal+0x193/0x200[83428.295968] driver_detach+0x44/0x90[83428.295971] bus_remove_driver+0x69/0xf0[83428.295975] pci_unregister_driver+0x2a/0xb0[83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas][83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310[83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5[83428.296000] ? __x64_sys_getdents64+0x9a/0x110[83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5[83428.296009] ? syscall_trace_enter+0xf6/0x1b0[83428.296014] do_syscall_64+0x7b/0x2c0[83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5[83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: host: max3421-hcd: Fix error pointer dereference in probe cleanupThe kthread_run() function returns error pointers so themax3421_hcd->spi_thread pointer can be either error pointers or NULL.Check for both before dereferencing it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlockPrevent USB runtime PM (autosuspend) for AX88772* in bind.usbnet enables runtime PM (autosuspend) by default, so disabling it viathe usb_driver flag is ineffective. On AX88772B, autosuspend shows nomeasurable power saving with current driver (no link partner, adminup/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib poweringthe PHY off on admin-down, not from USB autosuspend.The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)may synchronously trigger autoresume (usb_autopm_get_interface()) intoasix_resume() while the USB PM lock is held. Resume paths then invokephylink/phylib and MDIO, which also expect RTNL, leading to possibledeadlocks or PM lock vs MDIO wake issues.To avoid this, keep the device runtime-PM active by taking a usagereference in ax88772_bind() and dropping it in unbind(). A non-zero PMusage count blocks runtime suspend regardless of userspace policy(.../power/control - pm_runtime_allow/forbid), making this approachrobust against sysfs overrides.Holding a runtime-PM usage ref does not affect system-wide suspend;system sleep/resume callbacks continue to run as before.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Enforce expected_attach_type for tailcall compatibilityYinhao et al. recently reported: Our fuzzer tool discovered an uninitialized pointer issue in the bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem. This leads to a NULL pointer dereference when a BPF program attempts to deference the txq member of struct xdp_buff object.The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as theentry point for bpf_prog_test_run_xdp() and its expected_attach_type canneither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slotof a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAPto pass xdp_is_valid_access() validation. The program returns struct xdp_md'segress_ifindex, and the latter is only allowed to be accessed under mentionedexpected_attach_type. progB is then inserted into the tailcall which progAcalls.The underlying issue goes beyond XDP though. Another example are programsof type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as wellas sock_addr_func_proto() have different logic depending on the programs'expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAMEshould not be allowed doing a tailcall into a program which calls bpf_bind()out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.In short, specifying expected_attach_type allows to open up additionalfunctionality or restrictions beyond what the basic bpf_prog_type enables.The use of tailcalls must not violate these constraints. Fix it by enforcingexpected_attach_type in __bpf_prog_map_compatible().Note that we only enforce this for tailcall maps, but not for BPF devmaps orcpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() andcpu_map_bpf_prog_run*() which set up a new environment / context and thereforethese situations are not prone to this issue.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC IIIAnthony Yznaga tracked down that a BUG_ON in ext4 code with large foliosenabled resulted from copy_from_user() returning impossibly large valuesgreater than the size to be copied. This lead to __copy_from_iter()returning impossible values instead of the actual number of bytes it wasable to copy.The BUG_ON has been reported inhttps://lore.kernel.org/r/b14f55642207e63e907965e209f6323a0df6dcee.camel@physik.fu-berlin.deThe referenced commit introduced exception handlers on user-space memoryreferences in copy_from_user and copy_to_user. These handlers return fromthe respective function and calculate the remaining bytes left to copyusing the current register contents. The exception handlers expect that%o2 has already been masked during the bulk copy loop, but the masking wasperformed after that loop. This will fix the return value of copy_from_userand copy_to_user in the faulting case. The behaviour of memcpy staysunchanged.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctxIn __blk_mq_update_nr_hw_queues() the return value ofblk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctxfails, later changing the number of hw_queues or removing disk willtrigger the following warning: kernfs: can not remove 'nr_tags', no directory WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160 Call Trace: remove_files.isra.1+0x38/0xb0 sysfs_remove_group+0x4d/0x100 sysfs_remove_groups+0x31/0x60 __kobject_del+0x23/0xf0 kobject_del+0x17/0x40 blk_mq_unregister_hctx+0x5d/0x80 blk_mq_sysfs_unregister_hctxs+0x94/0xd0 blk_mq_update_nr_hw_queues+0x124/0x760 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x92/0x120 [null_blk]kobjct_del() was called unconditionally even if sysfs creation failed.Fix it by checkig the kobject creation statusbefore deleting it.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hwrng: ks-sa - fix division by zero in ks_sa_rng_initFix division by zero in ks_sa_rng_init caused by missing clockpointer initialization. The clk_get_rate() call is performed onan uninitialized clk pointer, resulting in division by zero whencalculating delay values.Add clock initialization code before using the clock. drivers/char/hw_random/ks-sa-rng.c | 7 +++++++ 1 file changed, 7 insertions(+)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/vt-d: debugfs: Fix legacy mode page table dump logicIn legacy mode, SSPTPTR is ignored if TT is not 00b or 01b. SSPTPTRmaybe uninitialized or zero in that case and may cause oops like: Oops: general protection fault, probably for non-canonical address 0xf00087d3f000f000: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 786 Comm: cat Not tainted 6.16.0 #191 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 RIP: 0010:pgtable_walk_level+0x98/0x150 RSP: 0018:ffffc90000f279c0 EFLAGS: 00010206 RAX: 0000000040000000 RBX: ffffc90000f27ab0 RCX: 000000000000001e RDX: 0000000000000003 RSI: f00087d3f000f000 RDI: f00087d3f0010000 RBP: ffffc90000f27a00 R08: ffffc90000f27a98 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: f00087d3f000f000 R13: 0000000000000000 R14: 0000000040000000 R15: ffffc90000f27a98 FS: 0000764566dcb740(0000) GS:ffff8881f812c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000764566d44000 CR3: 0000000109d81003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: pgtable_walk_level+0x88/0x150 domain_translation_struct_show.isra.0+0x2d9/0x300 dev_domain_translation_struct_show+0x20/0x40 seq_read_iter+0x12d/0x490...Avoid walking the page table if TT is not 00b or 01b.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) whichwould lead to a error pointer dereference. Use IS_ERR_OR_NULL() to checkthat the pointer is valid.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/xe/guc: Check GuC running state before deregistering exec queueIn normal operation, a registered exec queue is disabled andderegistered through the GuC, and freed only after the GuC confirmscompletion. However, if the driver is forced to unbind while the execqueue is still running, the user may call exec_destroy() after the GuChas already been stopped and CT communication disabled.In this case, the driver cannot receive a response from the GuC,preventing proper cleanup of exec queue resources. Fix this by directlyreleasing the resources when GuC is not running.Here is the failure dmesg log:"[ 468.089581] ---[ end trace 0000000000000000 ]---[ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535)[ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535[ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1[ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1)[ 468.092716] ------------[ cut here ]------------[ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe]"v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled(). As CT may go down and come back during VF migration.(cherry picked from commit 9b42321a02c50a12b2beb6ae9469606257fbecea)
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: detect invalid INLINE_DATA + EXTENTS flag combinationsyzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verityfile on a corrupted ext4 filesystem mounted without a journal.The issue is that the filesystem has an inode with both the INLINE_DATAand EXTENTS flags set: EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15: comm syz.0.17: corrupted extent tree: lblk 0 < prev 66Investigation revealed that the inode has both flags set: DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1This is an invalid combination since an inode should have either:- INLINE_DATA: data stored directly in the inode- EXTENTS: data stored in extent-mapped blocksHaving both flags causes ext4_has_inline_data() to return true, skippingextent tree validation in __ext4_iget(). The unvalidated out-of-orderextents then trigger a BUG_ON in ext4_es_cache_extent() due to integerunderflow when calculating hole sizes.Fix this by detecting this invalid flag combination early in ext4_iget()and rejecting the corrupted inode.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages()Currently, if find_and_map_user_pages() takes a DMA xfer request from theuser with a length field set to 0, or in a rare case, the host receivesQAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_sizeis equal to the requested transaction size, the function will return 0before allocating an sgt or setting the fields of the dma_xfer struct.In that case, encode_addr_size_pairs() will try to access the sgt whichwill lead to a general protection fault.Return an EINVAL in case the user provides a zero-sized ALP, or the devicerequests continuation after all of the bytes have been transferred.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNPWhen running as an SNP or TDX guest under KVM, force the legacy PCI hole,i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UCvia a forced variable MTRR range.In most KVM-based setups, legacy devices such as the HPET and TPM areenumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, andoptionally a SystemMemory descriptor for an OperationRegion, e.g. if thedevice needs to be accessed via a Control Method.If a SystemMemory entry is present, then the kernel's ACPI driver willauto-ioremap the region so that it can be accessed at will. However, theACPI spec doesn't provide a way to enumerate the memory type ofSystemMemory regions, i.e. there's no way to tell software that a regionmust be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver alwaysmaps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.The dedicated device drivers however, e.g. the HPET driver and TPM driver,want to map their associated memory as UC or WC, as accessing PCI devicesusing WB is unsupported.On bare metal and non-CoCO, the conflicting requirements "work" as firmwareconfigures the PCI hole (and other device memory) to be UC in the MTRRs.So even though the ACPI mappings request WB, they are forced to UC- in thekernel's tracking due to the kernel properly handling the MTRR overrides,and thus are compatible with the drivers' requested WC/UC-.With force WB MTRRs on SNP and TDX guests, the ACPI mappings get theirrequested WB if the ACPI mappings are established before the dedicateddriver code attempts to initialize the device. E.g. if acpi_init()runs before the corresponding device driver is probed, ACPI's WB mappingwill "win", and result in the driver's ioremap() failing because theexisting WB mapping isn't compatible with the requested WC/UC-.E.g. when a TPM is emulated by the hypervisor (ignoring the securityimplications of relying on what is allegedly an untrusted entity to storemeasurements), the TPM driver will request UC and fail: [ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0 [ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86'smemtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).E.g. tracing mapping requests for TPM TIS yields: Mapping TPM TIS with req_type = 0 WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460 Modules linked in: CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025 RIP: 0010:memtype_reserve+0x2ab/0x460 __ioremap_caller+0x16d/0x3d0 ioremap_cache+0x17/0x30 x86_acpi_os_ioremap+0xe/0x20 acpi_os_map_iomem+0x1f3/0x240 acpi_os_map_memory+0xe/0x20 acpi_ex_system_memory_space_handler+0x273/0x440 acpi_ev_address_space_dispatch+0x176/0x4c0 acpi_ex_access_region+0x2ad/0x530 acpi_ex_field_datum_io+0xa2/0x4f0 acpi_ex_extract_from_field+0x296/0x3e0 acpi_ex_read_data_from_field+0xd1/0x460 acpi_ex_resolve_node_to_value+0x2ee/0x530 acpi_ex_resolve_to_value+0x1f2/0x540 acpi_ds_evaluate_name_path+0x11b/0x190 acpi_ds_exec_end_op+0x456/0x960 acpi_ps_parse_loop+0x27a/0xa50 acpi_ps_parse_aml+0x226/0x600 acpi_ps_execute_method+0x172/0x3e0 acpi_ns_evaluate+0x175/0x5f0 acpi_evaluate_object+0x213/0x490 acpi_evaluate_integer+0x6d/0x140 acpi_bus_get_status+0x93/0x150 acpi_add_single_object+0x43a/0x7c0 acpi_bus_check_add+0x149/0x3a0 acpi_bus_check_add_1+0x16/0x30 acpi_ns_walk_namespace+0x22c/0x360 acpi_walk_namespace+0x15c/0x170 acpi_bus_scan+0x1dd/0x200 acpi_scan_init+0xe5/0x2b0 acpi_init+0x264/0x5b0 do_one_i---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ice: ice_adapter: release xa entry on adapter allocation failureWhen ice_adapter_new() fails, the reserved XArray entry created byxa_insert() is not released. This causes subsequent insertions atthe same index to return -EBUSY, potentially leading toNULL pointer dereferences.Reorder the operations as suggested by Przemek Kitszel:1. Check if adapter already exists (xa_load)2. Reserve the XArray slot (xa_reserve)3. Allocate the adapter (ice_adapter_new)4. Store the adapter (xa_store)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pwm: berlin: Fix wrong register in suspend/resumeThe 'enable' register should be BERLIN_PWM_EN rather thanBERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, therewill be cpu exception then kernel panic during suspend/resume.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Revert "ipmi: fix msg stack when IPMI is disconnected"This reverts commit c608966f3f9c2dca596967501d00753282b395fc.This patch has a subtle bug that can cause the IPMI driver to go into aninfinite loop if the BMC misbehaves in a certain way. Apparentlycertain BMCs do misbehave this way because several reports have come inrecently about this.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: avoid potential buffer over-read in parse_apply_sb_mount_options()Unlike other strings in the ext4 superblock, we rely on tune2fs tomake sure s_mount_opts is NUL terminated. Hardenparse_apply_sb_mount_options() by treating s_mount_opts as a potential__nonstring.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Squashfs: reject negative file sizes in squashfs_read_inode()Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs.This warning is ultimately caused because the underlying Squashfs filesystem returns a file with a negative file size.This commit checks for a negative file size and returns EINVAL.[phillip@squashfs.org.uk: only need to check 64 bit quantity]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() pathsThe usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit()path is very broken.sys_prlimit64() does get_task_struct(tsk) but this only protects task_structitself. If tsk != current and tsk is not a leader, this process can exit/execand task_lock(tsk->group_leader) may use the already freed task_struct.Another problem is that sys_prlimit64() can race with mt-exec which changes->group_leader. In this case do_prlimit() may take the wrong lock, or (worse)->group_leader may change between task_lock() and task_unlock().Change sys_prlimit64() to take tasklist_lock when necessary. This is notnice, but I don't see a better fix for -stable.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipmi: Rework user message limit handlingThe limit on the number of user messages had a number of issues,improper counting in some cases and a use after free.Restructure how this is all done to handle more in the receive messageallocation routine, so all refcouting and user message limit countsare done in that routine. It's a lot cleaner and safer.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: avoid potential out-of-bounds in btrfs_encode_fh()The function btrfs_encode_fh() does not properly account for the threecases it handles.Before writing to the file handle (fh), the function only returns to theuser BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) orBTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).However, when a parent exists and the root ID of the parent and theinode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT(10 dwords, 40 bytes).If *max_len is not large enough, this write goes out of bounds becauseBTRFS_FID_SIZE_CONNECTABLE_ROOT is greater thanBTRFS_FID_SIZE_CONNECTABLE originally returned.This results in an 8-byte out-of-bounds write atfid->parent_root_objectid = parent_root_id.A previous attempt to fix this issue was made but was lost.https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/Although this issue does not seem to be easily triggerable, it is apotential memory corruption bug that should be fixed. This patchresolves the issue by ensuring the function returns the appropriate sizefor all three cases and validates that *max_len is large enough beforewriting any data.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try()v4l2_subdev_call_state_try() macro allocates a subdev state with__v4l2_subdev_state_alloc(), but does not check the returned value. If__v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that wouldcause v4l2_subdev_call_state_try() to crash.Add proper error handling to v4l2_subdev_call_state_try().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: clear extent cache after moving/defragmenting extentsThe extent map cache can become stale when extents are moved ordefragmented, causing subsequent operations to see outdated extent flags. This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().The problem occurs when:1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED2. ioctl(FITRIM) triggers ocfs2_move_extents()3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent() which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)5. The extent map cache is not invalidated after the move6. Later write() operations read stale cached flags (0x2) but disk has updated flags (0x0), causing a mismatch7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggersFix by clearing the extent map cache after each extent move/defragoperation in __ocfs2_move_extents_range(). This ensures subsequentoperations read fresh extent data from disk.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Fix IPsec cleanup over MPV deviceWhen we do mlx5e_detach_netdev() we eventually disable blocking eventsnotifier, among those events are IPsec MPV events from IB to core.So before disabling those blocking events, make sure to also unregisterthe devcom device and mark all this device operations as complete,in order to prevent the other device from using invalid netdevduring future devcom events which could cause the trace below.BUG: kernel NULL pointer dereference, address: 0000000000000010PGD 146427067 P4D 146427067 PUD 146488067 PMD 0Oops: Oops: 0000 [#1] SMPCPU: 1 UID: 0 PID: 7735 Comm: devlink Tainted: GW 6.12.0-rc6_for_upstream_min_debug_2024_11_08_00_46 #1Tainted: [W]=WARNHardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014RIP: 0010:mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]Code: 00 01 48 83 05 23 32 1e 00 01 41 b8 ed ff ff ff e9 60 ff ff ff 48 83 05 00 32 1e 00 01 eb e3 66 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 47 10 48 83 05 5f 32 1e 00 01 48 8b 50 40 48 85 d2 74 05 40RSP: 0018:ffff88811a5c35f8 EFLAGS: 00010206RAX: ffff888106e8ab80 RBX: ffff888107d7e200 RCX: ffff88810d6f0a00RDX: ffff88810d6f0a00 RSI: 0000000000000001 RDI: 0000000000000000RBP: ffff88811a17e620 R08: 0000000000000040 R09: 0000000000000000R10: ffff88811a5c3618 R11: 0000000de85d51bd R12: ffff88811a17e600R13: ffff88810d6f0a00 R14: 0000000000000000 R15: ffff8881034bda80FS: 00007f27bdf89180(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 0000000000000010 CR3: 000000010f159005 CR4: 0000000000372eb0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] mlx5e_devcom_event_mpv+0x42/0x60 [mlx5_core] mlx5_devcom_send_event+0x8c/0x170 [mlx5_core] blocking_event+0x17b/0x230 [mlx5_core] notifier_call_chain+0x35/0xa0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_mp_event_replay+0x12/0x20 [mlx5_core] mlx5_ib_bind_slave_port+0x228/0x2c0 [mlx5_ib] mlx5_ib_stage_init_init+0x664/0x9d0 [mlx5_ib] ? idr_alloc_cyclic+0x50/0xb0 ? __kmalloc_cache_noprof+0x167/0x340 ? __kmalloc_noprof+0x1a7/0x430 __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe9/0x310 [mlx5_ib] ? kernfs_add_one+0x107/0x150 ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] auxiliary_bus_probe+0x3e/0x90 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x62d/0x830 __auxiliary_device_add+0x3b/0xa0 ? auxiliary_device_init+0x41/0x90 add_adev+0xd1/0x150 [mlx5_core] mlx5_rescan_drivers_locked+0x21c/0x300 [mlx5_core] esw_mode_change+0x6c/0xc0 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x21e/0x640 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x170/0x170 ? devlink_nl_eswitch_get_doit+0x290/0x290 ? devlink_nl_pre_doit_port_optional+0x50/0x50 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __sys_recvmsg+0x4e/0x90 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53RIP: 0033:0x7f27bc91b13aCode: bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 8b 05 fa 96 2c 00 45 89 c9 4c 63 d1 48 63 ff 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff ---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: avoid NULL dereference when chunk data buffer is missingchunk->skb pointer is dereferenced in the if-block where it's supposedto be NULL only.chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_listinstead and do it just before replacing chunk->skb. We're sure thatotherwise chunk->skb is non-NULL because of outer if() condition.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vsock: Ignore signal/timeout on connect() if already establishedDuring connect(), acting on a signal/timeout by disconnecting an alreadyestablished socket leads to several issues:1. connect() invoking vsock_transport_cancel_pkt() -> virtio_transport_purge_skbs() may race with sendmsg() invoking virtio_transport_get_credit(). This results in a permanently elevated `vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.2. connect() resetting a connected socket's state may race with socket being placed in a sockmap. A disconnected socket remaining in a sockmap breaks sockmap's assumptions. And gives rise to WARNs.3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a transport change/drop after TCP_ESTABLISHED. Which poses a problem for any simultaneous sendmsg() or connect() and may result in a use-after-free/null-ptr-deref.Do not disconnect socket on signal/timeout. Keep the logic for unconnectedsockets: they don't linger, can't be placed in a sockmap, are rejected bysendmsg().[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Clean up only new IRQ glue on request_irq() failureThe mlx5_irq_alloc() function can inadvertently free the entire rmapand end up in a crash[1] when the other threads tries to access this,when request_irq() fails due to exhausted IRQ vectors. This commitmodifies the cleanup to remove only the specific IRQ mapping that wasjust added.This prevents removal of other valid mappings and ensures precisecleanup of the failed IRQ allocation's associated glue object.Note: This error is observed when both fwctl and rds configs are enabled.[1]mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed torequest irq. err = -28infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 whiletrying to test write-combining supportmlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed torequest irq. err = -28infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 whiletrying to test write-combining supportmlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed torequest irq. err = -28mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed torequest irq. err = -28general protection fault, probably for non-canonical address0xe277a58fde16f291: 0000 [#1] SMP NOPTIRIP: 0010:free_irq_cpu_rmap+0x23/0x7dCall Trace: ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] ? __die_body.cold+0x8/0xa ? die_addr+0x39/0x53 ? exc_general_protection+0x1c4/0x3e9 ? dev_vprintk_emit+0x5f/0x90 ? asm_exc_general_protection+0x22/0x27 ? free_irq_cpu_rmap+0x23/0x7d mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] irq_pool_request_vector+0x7d/0x90 [mlx5_core] mlx5_irq_request+0x2e/0xe0 [mlx5_core] mlx5_irq_request_vector+0xad/0xf7 [mlx5_core] comp_irq_request_pci+0x64/0xf0 [mlx5_core] create_comp_eq+0x71/0x385 [mlx5_core] ? mlx5e_open_xdpsq+0x11c/0x230 [mlx5_core] mlx5_comp_eqn_get+0x72/0x90 [mlx5_core] ? xas_load+0x8/0x91 mlx5_comp_irqn_get+0x40/0x90 [mlx5_core] mlx5e_open_channel+0x7d/0x3c7 [mlx5_core] mlx5e_open_channels+0xad/0x250 [mlx5_core] mlx5e_open_locked+0x3e/0x110 [mlx5_core] mlx5e_open+0x23/0x70 [mlx5_core] __dev_open+0xf1/0x1a5 __dev_change_flags+0x1e1/0x249 dev_change_flags+0x21/0x5c do_setlink+0x28b/0xcc4 ? __nla_parse+0x22/0x3d ? inet6_validate_link_af+0x6b/0x108 ? cpumask_next+0x1f/0x35 ? __snmp6_fill_stats64.constprop.0+0x66/0x107 ? __nla_validate_parse+0x48/0x1e6 __rtnl_newlink+0x5ff/0xa57 ? kmem_cache_alloc_trace+0x164/0x2ce rtnl_newlink+0x44/0x6e rtnetlink_rcv_msg+0x2bb/0x362 ? __netlink_sendskb+0x4c/0x6c ? netlink_unicast+0x28f/0x2ce ? rtnl_calcit.isra.0+0x150/0x146 netlink_rcv_skb+0x5f/0x112 netlink_unicast+0x213/0x2ce netlink_sendmsg+0x24f/0x4d9 __sock_sendmsg+0x65/0x6a ____sys_sendmsg+0x28f/0x2c9 ? import_iovec+0x17/0x2b ___sys_sendmsg+0x97/0xe0 __sys_sendmsg+0x81/0xd8 do_syscall_64+0x35/0x87 entry_SYSCALL_64_after_hwframe+0x6e/0x0RIP: 0033:0x7fc328603727Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b edff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48RSP: 002b:00007ffe8eb3f1a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002eRAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc328603727RDX: 0000000000000000 RSI: 00007ffe8eb3f1f0 RDI: 000000000000000dRBP: 00007ffe8eb3f1f0 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000R13: 00000000000---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:devlink: rate: Unset parent pointer in devl_rate_nodes_destroyThe function devl_rate_nodes_destroy is documented to "Unset parent forall rate objects". However, it was only calling the driver-specific`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementingthe parent's refcount, without actually setting the`devlink_rate->parent` pointer to NULL.This leaves a dangling pointer in the `devlink_rate` struct, which causerefcount error in netdevsim[1] and mlx5[2]. In addition, this isinconsistent with the behavior of `devlink_nl_rate_parent_node_set`,where the parent pointer is correctly cleared.This patch fixes the issue by explicitly setting `devlink_rate->parent`to NULL after notifying the driver, thus fulfilling the function'sdocumented behavior for all rate objects.[1]repro steps:echo 1 > /sys/bus/netdevsim/new_devicedevlink dev eswitch set netdevsim/netdevsim1 mode switchdevecho 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfsdevlink port function rate add netdevsim/netdevsim1/test_nodedevlink port function rate set netdevsim/netdevsim1/128 parent test_nodeecho 1 > /sys/bus/netdevsim/del_devicedmesg:refcount_t: decrement hit 0; leaking memory.WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONEHardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014RIP: 0010:refcount_warn_saturate+0x42/0xe0Call Trace: devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53[2]devlink dev eswitch set pci/0000:08:00.0 mode switchdevdevlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000devlink port function rate add pci/0000:08:00.0/group1devlink port function rate set pci/0000:08:00.0/32768 parent group1modprobe -r mlx5_ib mlx5_fwctl mlx5_coredmesg:refcount_t: decrement hit 0; leaking memory.WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONEHardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014RIP: 0010:refcount_warn_saturate+0x42/0xe0Call Trace: devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterateover 'cqe->len_list[]' using only a zero-length terminator asthe stopping condition. If the terminator was missing ormalformed, the loop could run past the end of the fixed-size array.Add an explicit bound check using ARRAY_SIZE() in both loops to preventa potential out-of-bounds access.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:s390/ctcm: Fix double-kfreeThe function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionallyfrom function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'frees it again.Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.Bug detected by the clang static analyzer.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: openvswitch: remove never-working support for setting nsh fieldsThe validation of the set(nsh(...)) action is completely wrong.It runs through the nsh_key_put_from_nlattr() function that is thesame function that validates NSH keys for the flow match and thepush_nsh() action. However, the set(nsh(...)) has a very differentmemory layout. Nested attributes in there are doubled in size incase of the masked set(). That makes proper validation impossible.There is also confusion in the code between the 'masked' flag, thatsays that the nested attributes are doubled in size containing boththe value and the mask, and the 'is_mask' that says that the valuewe're parsing is the mask. This is causing kernel crash on trying towrite into mask part of the match with SW_FLOW_KEY_PUT() duringvalidation, while validate_nsh() doesn't allocate any memory for it: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary) RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch] Call Trace: validate_nsh+0x60/0x90 [openvswitch] validate_set.constprop.0+0x270/0x3c0 [openvswitch] __ovs_nla_copy_actions+0x477/0x860 [openvswitch] ovs_nla_copy_actions+0x8d/0x100 [openvswitch] ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch] genl_family_rcv_msg_doit+0xdb/0x130 genl_family_rcv_msg+0x14b/0x220 genl_rcv_msg+0x47/0xa0 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x280/0x3b0 netlink_sendmsg+0x1f7/0x430 ____sys_sendmsg+0x36b/0x3a0 ___sys_sendmsg+0x87/0xd0 __sys_sendmsg+0x6d/0xd0 do_syscall_64+0x7b/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe third issue with this process is that while trying to convertthe non-masked set into masked one, validate_set() copies and doublesthe size of the OVS_KEY_ATTR_NSH as if it didn't have any nestedattributes. It should be copying each nested attribute and doublingthem in size independently. And the process must be properly reversedduring the conversion back from masked to a non-masked variant duringthe flow dump.In the end, the only two outcomes of trying to use this action areeither validation failure or a kernel crash. And if somehow someonemanages to install a flow with such an action, it will most definitelynot do what it is supposed to, since all the keys and the masks aremixed up.Fixing all the issues is a complex task as it requires re-writingmost of the validation code.Given that and the fact that this functionality never worked sinceintroduction, let's just remove it altogether. It's better tore-introduce it later with a proper implementation instead of tryingto fix it in stable releases.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: fix a race in mptcp_pm_del_add_timer()mptcp_pm_del_add_timer() can call sk_stop_timer_sync(sk, &entry->add_timer)while another might have free entry already, as reported by syzbot.Add RCU protection to fix this issue.Also change confusing add_timer variable with stop_timer boolean.syzbot report:BUG: KASAN: slab-use-after-free in __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616Read of size 4 at addr ffff8880311e4150 by task kworker/1:1/44CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted syzkaller #0 PREEMPT_{RT,(full)}Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025Workqueue: events mptcp_workerCall Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616 sk_stop_timer_sync+0x1b/0x90 net/core/sock.c:3631 mptcp_pm_del_add_timer+0x283/0x310 net/mptcp/pm.c:362 mptcp_incoming_options+0x1357/0x1f60 net/mptcp/options.c:1174 tcp_data_queue+0xca/0x6450 net/ipv4/tcp_input.c:5361 tcp_rcv_established+0x1335/0x2670 net/ipv4/tcp_input.c:6441 tcp_v4_do_rcv+0x98b/0xbf0 net/ipv4/tcp_ipv4.c:1931 tcp_v4_rcv+0x252a/0x2dc0 net/ipv4/tcp_ipv4.c:2374 ip_protocol_deliver_rcu+0x221/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:239 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6079 [inline] __netif_receive_skb+0x143/0x380 net/core/dev.c:6192 process_backlog+0x31e/0x900 net/core/dev.c:6544 __napi_poll+0xb6/0x540 net/core/dev.c:7594 napi_poll net/core/dev.c:7657 [inline] net_rx_action+0x5f7/0xda0 net/core/dev.c:7784 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] __local_bh_enable_ip+0x1a0/0x2e0 kernel/softirq.c:302 mptcp_pm_send_ack net/mptcp/pm.c:210 [inline] mptcp_pm_addr_send_ack+0x41f/0x500 net/mptcp/pm.c:-1 mptcp_pm_worker+0x174/0x320 net/mptcp/pm.c:1002 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Allocated by task 44: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:400 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:417 kasan_kmalloc include/linux/kasan.h:262 [inline] __kmalloc_cache_noprof+0x1ef/0x6c0 mm/slub.c:5748 kmalloc_noprof include/linux/slab.h:957 [inline] mptcp_pm_alloc_anno_list+0x104/0x460 net/mptcp/pm.c:385 mptcp_pm_create_subflow_or_signal_addr+0xf9d/0x1360 net/mptcp/pm_kernel.c:355 mptcp_pm_nl_fully_established net/mptcp/pm_kernel.c:409 [inline] __mptcp_pm_kernel_worker+0x417/0x1ef0 net/mptcp/pm_kernel.c:1529 mptcp_pm_worker+0x1ee/0x320 net/mptcp/pm.c:1008 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245Freed by task 6630: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 __kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:587 kasan_save_free_info mm/kasan/kasan.h:406 [inline] poison_slab_object m---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: sg: Do not sleep in atomic contextsg_finish_rem_req() calls blk_rq_unmap_user(). The latter function maysleep. Hence, call sg_finish_rem_req() with interrupts enabled insteadof disabled.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()nvme_fc_delete_assocation() waits for pending I/O to complete beforereturning, and an error can cause ->ioerr_work to be queued aftercancel_work_sync() had been called. Move the call to cancel_work_sync() tobe after nvme_fc_delete_association() to ensure ->ioerr_work is not runningwhen the nvme_fc_ctrl object is freed. Otherwise the following can occur:[ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL[ 1135.917705] ------------[ cut here ]------------[ 1135.922336] kernel BUG at lib/list_debug.c:52![ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI[ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary)[ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025[ 1135.950969] Workqueue: 0x0 (nvme-wq)[ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f[ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b[ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046[ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000[ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0[ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08[ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100[ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0[ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000[ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0[ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400[ 1136.055910] PKRU: 55555554[ 1136.058623] Call Trace:[ 1136.061074] [ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0[ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0[ 1136.071898] ? move_linked_works+0x4a/0xa0[ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.081744] ? __die_body.cold+0x8/0x12[ 1136.085584] ? die+0x2e/0x50[ 1136.088469] ? do_trap+0xca/0x110[ 1136.091789] ? do_error_trap+0x65/0x80[ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.101289] ? exc_invalid_op+0x50/0x70[ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20[ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f[ 1136.120806] move_linked_works+0x4a/0xa0[ 1136.124733] worker_thread+0x216/0x3a0[ 1136.128485] ? __pfx_worker_thread+0x10/0x10[ 1136.132758] kthread+0xfa/0x240[ 1136.135904] ? __pfx_kthread+0x10/0x10[ 1136.139657] ret_from_fork+0x31/0x50[ 1136.143236] ? __pfx_kthread+0x10/0x10[ 1136.146988] ret_from_fork_asm+0x1a/0x30[ 1136.150915]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:be2net: pass wrb_params in case of OS2BMCbe_insert_vlan_in_pkt() is called with the wrb_params argument being NULLat be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULLpointer when processing a workaround for specific packet, as commitbc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6packet") states.The correct way would be to pass the wrb_params from be_xmit().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: guest_memfd: Remove bindings on memslot deletion when gmem is dyingWhen unbinding a memslot from a guest_memfd instance, remove the bindingseven if the guest_memfd file is dying, i.e. even if its file refcount hasgone to zero. If the memslot is freed before the file is fully released,nullifying the memslot side of the binding in kvm_gmem_release() willwrite to freed memory, as detected by syzbot+KASAN: ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353 Write of size 8 at addr ffff88807befa508 by task syz.0.17/6022 CPU: 0 UID: 0 PID: 6022 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025 Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353 __fput+0x44c/0xa70 fs/file_table.c:468 task_work_run+0x1d4/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xe9/0x130 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x2bd/0xfa0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbeeff8efc9 Allocated by task 6023: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:397 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:414 kasan_kmalloc include/linux/kasan.h:262 [inline] __kmalloc_cache_noprof+0x3e2/0x700 mm/slub.c:5758 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] kvm_set_memory_region+0x747/0xb90 virt/kvm/kvm_main.c:2104 kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154 kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6023: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5c/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2533 [inline] slab_free mm/slub.c:6622 [inline] kfree+0x19a/0x6d0 mm/slub.c:6829 kvm_set_memory_region+0x9c4/0xb90 virt/kvm/kvm_main.c:2130 kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154 kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fDeliberately don't acquire filemap invalid lock when the file is dying asthe lifecycle of f_mapping is outside the purview of KVM. Dereferencingthe mapping is *probably* fine, but there's no need to invalidate anythingas memslot deletion is responsible for zapping SPTEs, and the only codethat can access the dying file is kvm_gmem_release(), whose core code ismutual---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/panthor: Flush shmem writes before mapping buffers CPU-uncachedThe shmem layer zeroes out the new pages using cached mappings, and ifwe don't CPU-flush we might leave dirty cachelines behind, leading topotential data leaks and/or asynchronous buffer corruption when dirtycachelines are evicted.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: act_ife: initialize struct tc_ife to fix KMSAN kernel-infoleakFix a KMSAN kernel-infoleak detected by the syzbot .[net?] KMSAN: kernel-infoleak in __skb_datagram_iterIn tcf_ife_dump(), the variable 'opt' was partially initialized using adesignatied initializer. While the padding bytes are reamineduninitialized. nla_put() copies the entire structure into anetlink message, these uninitialized bytes leaked to userspace.Initialize the structure with memset before assigning its fieldsto ensure all members and padding are cleared prior to beign copied.This change silences the KMSAN report and prevents potential informationleaks from the kernel memory.This fix has been tested and validated by syzbot. This patch closes thebug reported at the following syzkaller link and ensures no infoleak.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:exfat: fix improper check of dentry.stream.valid_sizeWe found an infinite loop bug in the exFAT file system that can lead to aDenial-of-Service (DoS) condition. When a dentry in an exFAT filesystem ismalformed, the following system calls - SYS_openat, SYS_ftruncate, andSYS_pwrite64 - can cause the kernel to hang.Root cause analysis shows that the size validation code in exfat_find()does not check whether dentry.stream.valid_size is negative. As a result,the system calls mentioned above can succeed and eventually trigger the DoSissue.This patch adds a check for negative dentry.stream.valid_size to preventthis vulnerability.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:exfat: validate cluster allocation bits of the allocation bitmapsyzbot created an exfat image with cluster bits not set for the allocationbitmap. exfat-fs reads and uses the allocation bitmap without checkingthis. The problem is that if the start cluster of the allocation bitmapis 6, cluster 6 can be allocated when creating a directory with mkdir.exfat zeros out this cluster in exfat_mkdir, which can delete existingentries. This can reallocate the allocated entries. In addition,the allocation bitmap is also zeroed out, so cluster 6 can be reallocated.This patch adds exfat_test_bitmap_range to validate that clusters used forthe allocation bitmap are correctly marked as in-use.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Sync pending IRQ work before freeing ring bufferFix a race where irq_work can be queued in bpf_ringbuf_commit()but the ring buffer is freed before the work executes.In the syzbot reproducer, a BPF program attached to sched_switchtriggers bpf_ringbuf_commit(), queuing an irq_work. If the ring bufferis freed before this work executes, the irq_work thread may accessesfreed memory.Calling `irq_work_sync(&rb->work)` ensures that all pending irq_workcomplete before freeing the buffer.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix potential UAF in smb2_close_cached_fid()find_or_create_cached_dir() could grab a new reference after kref_put()had seen the refcount drop to zero but before cfid_list_lock is acquiredin smb2_close_cached_fid(), leading to use-after-free.Switch to kref_put_lock() so cfid_release() is called withcfid_list_lock held, closing that gap.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bnxt_en: Shutdown FW DMA in bnxt_shutdown()The netif_close() call in bnxt_shutdown() only stops packet DMA. Theremay be FW DMA for trace logging (recently added) that will continue. Ifwe kexec to a new kernel, the DMA will corrupt memory in the new kernel.Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW.This will stop the FW DMA. In case the call fails, call pcie_flr() toreset the function and stop the DMA.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: Prevent TOCTOU out-of-bounds writeFor the following path not holding the sock lock, sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump()make sure not to exceed bounds in case the address list has grownbetween buffer allocation (time-of-check) and write (time-of-use).
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: stmmac: Correctly handle Rx checksum offload errorsThe stmmac_rx function would previously set skb->ip_summed toCHECKSUM_UNNECESSARY if hardware checksum offload (CoE) was enabledand the packet was of a known IP ethertype.However, this logic failed to check if the hardware had actuallyreported a checksum error. The hardware status, indicating a header orpayload checksum failure, was being ignored at this stage. This couldcause corrupt packets to be passed up the network stack as valid.This patch corrects the logic by checking the `csum_none` status flag,which is set when the hardware reports a checksum error. If this flagis set, skb->ip_summed is now correctly set to CHECKSUM_NONE,ensuring the kernel's network stack will perform its own validation andproperly handle the corrupt packet.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:futex: Don't leak robust_list pointer on exec racesys_get_robust_list() and compat_get_robust_list() use ptrace_may_access()to check if the calling task is allowed to access another task'srobust_list pointer. This check is racy against a concurrent exec() in thetarget process.During exec(), a task may transition from a non-privileged binary to aprivileged one (e.g., setuid binary) and its credentials/memory mappingsmay change. If get_robust_list() performs ptrace_may_access() beforethis transition, it may erroneously allow access to sensitive informationafter the target becomes privileged.A racy access allows an attacker to exploit a window during whichptrace_may_access() passes before a target process transitions to aprivileged state via exec().For example, consider a non-privileged task T that is about to execute asetuid-root binary. An attacker task A calls get_robust_list(T) while Tis still unprivileged. Since ptrace_may_access() checks permissionsbased on current credentials, it succeeds. However, if T begins execimmediately afterwards, it becomes privileged and may change its memorymappings. Because get_robust_list() proceeds to access T->robust_listwithout synchronizing with exec() it may read user-space pointers from anow-privileged process.This violates the intended post-exec access restrictions and couldexpose sensitive memory addresses or be used as a primitive in a largerexploit chain. Consequently, the race can lead to unauthorizeddisclosure of information across privilege boundaries and poses apotential security risk.Take a read lock on signal->exec_update_lock prior to invokingptrace_may_access() and accessing the robust_list/compat_robust_list.This ensures that the target task's exec state remains stable during thecheck, allowing for consistent and synchronized validation ofcredentials.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()which causes the code to proceed with NULL clock pointers. The currentlogic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for bothvalid pointers and NULL, leading to potential NULL pointer dereferencein clk_get_rate().Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:"The error code within @ptr if it is an error pointer; 0 otherwise."This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULLpointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to becalled when of_clk_get() returns NULL.Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for validpointers, preventing potential NULL pointer dereference in clk_get_rate().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: enetc: fix the deadlock of enetc_mdio_lockAfter applying the workaround for err050089, the LS1028A platformexperiences RCU stalls on RT kernel. This issue is caused by therecursive acquisition of the read lock enetc_mdio_lock. Here list someof the call stacks identified under the enetc_poll path that may lead toa deadlock:enetc_poll -> enetc_lock_mdio -> enetc_clean_rx_ring OR napi_complete_done -> napi_gro_receive -> enetc_start_xmit -> enetc_lock_mdio -> enetc_map_tx_buffs -> enetc_unlock_mdio -> enetc_unlock_mdioAfter enetc_poll acquires the read lock, a higher-priority writer attemptsto acquire the lock, causing preemption. The writer detects that aread lock is already held and is scheduled out. However, readers underenetc_poll cannot acquire the read lock again because a writer is alreadywaiting, leading to a thread hang.Currently, the deadlock is avoided by adjusting enetc_lock_mdio to preventrecursive lock acquisition.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQXDP programs can change the layout of an xdp_buff throughbpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the drivercannot assume the size of the linear data area nor fragments. Fix thebug in mlx5 by generating skb according to xdp_buff after XDP programsrun.Currently, when handling multi-buf XDP, the mlx5 driver assumes thelayout of an xdp_buff to be unchanged. That is, the linear data areacontinues to be empty and fragments remain the same. This may causethe driver to generate erroneous skb or triggering a kernelwarning. When an XDP program added linear data throughbpf_xdp_adjust_head(), the linear data will be ignored asmlx5e_build_linear_skb() builds an skb without linear data and thenpull data from fragments to fill the linear data area. When an XDPprogram has shrunk the non-linear data through bpf_xdp_adjust_tail(),the delta passed to __pskb_pull_tail() may exceed the actual nonlineardata size and trigger the BUG_ON in it.To fix the issue, first record the original number of fragments. If thenumber of fragments changes after the XDP program runs, rewind the endfragment pointer by the difference and recalculate the truesize. Then,build the skb with the linear data area matching the xdp_buff. Finally,only pull data in if there is non-linear data and fill the linear partup to 256 bytes.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sysfs: check visibility before changing group attribute ownershipSince commit 0c17270f9b92 ("net: sysfs: Implement is_visible forphys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() canhit WARN_ON() when trying to change owner of a file that isn't visible.See the trace below: WARNING: CPU: 6 PID: 2938 at net/core/dev.c:12410 __dev_change_net_namespace+0xb89/0xc30 CPU: 6 UID: 0 PID: 2938 Comm: incusd Not tainted 6.17.1-1-mainline #1 PREEMPT(full) 4b783b4a638669fb644857f484487d17cb45ed1f Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.07 02/19/2025 RIP: 0010:__dev_change_net_namespace+0xb89/0xc30 [...] Call Trace: ? if6_seq_show+0x30/0x50 do_setlink.isra.0+0xc7/0x1270 ? __nla_validate_parse+0x5c/0xcc0 ? security_capable+0x94/0x1a0 rtnl_newlink+0x858/0xc20 ? update_curr+0x8e/0x1c0 ? update_entity_lag+0x71/0x80 ? sched_balance_newidle+0x358/0x450 ? psi_task_switch+0x113/0x2a0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x346/0x3e0 ? sched_clock+0x10/0x30 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? __sys_bind+0xe3/0x110 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? sock_alloc_file+0x63/0xc0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? alloc_fd+0x12e/0x190 ? put_unused_fd+0x2a/0x70 ? do_sys_openat2+0xa2/0xe0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Fix this by checking is_visible() before trying to touch the attribute.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: AIDE is an advanced intrusion detection environment. From versions 0.13 to 0.19.1, there is a null pointer dereference vulnerability in AIDE. An attacker can crash the program during report printing or database listing after setting extended file attributes with an empty attribute value or with a key containing a comma. A local user might exploit this to cause a local denial of service. This issue has been patched in version 0.19.2. A workaround involves removing xattrs group from rules matching files on affected file systems.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- aide > 0-0 (version in image is 0.16-24.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:x86/fpu: Ensure XFD state on signal deliverySean reported [1] the following splat when running KVM tests: WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70 Call Trace: fpu__clear_user_states+0x9c/0x100 arch_do_signal_or_restart+0x142/0x210 exit_to_user_mode_loop+0x55/0x100 do_syscall_64+0x205/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53Chao further identified [2] a reproducible scenario involving signaldelivery: a non-AMX task is preempted by an AMX-enabled task whichmodifies the XFD MSR.When the non-AMX task resumes and reloads XSTATE with init values,a warning is triggered due to a mismatch between fpstate::xfd and theCPU's current XFD state. fpu__clear_user_states() does not currentlyre-synchronize the XFD state after such preemption.Invoke xfd_update_state() which detects and corrects the mismatch ifthere is a dynamic feature.This also benefits the sigreturn path, as fpu__restore_sig() may callfpu__clear_user_states() when the sigframe is inaccessible.[ dhansen: minor changelog munging ]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ftrace: Fix softlockup in ftrace_module_enableA soft lockup was observed when loading amdgpu module.If a module has a lot of tracable functions, multiple callsto kallsyms_lookup can spend too much time in RCU criticalsection and with disabled preemption, causing kernel panic.This is the same issue that was fixed incommit d0b24b4e91fc ("ftrace: Prevent RCU stall on PREEMPT_VOLUNTARYkernels") and commit 42ea22e754ba ("ftrace: Add cond_resched() toftrace_graph_set_hash()").Fix it the same way by adding cond_resched() in ftrace_module_enable.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:amd/amdkfd: enhance kfd process check in switch partitioncurrent switch partition only check if kfd_processes_table is empty.kfd_prcesses_table entry is deleted in kfd_process_notifier_release, butkfd_process tear down is in kfd_process_wq_release.consider two processes:Process A (workqueue) -> kfd_process_wq_release -> Access kfd_node memberProcess B switch partition -> amdgpu_xcp_pre_partition_switch -> amdgpu_amdkfd_device_fini_sw-> kfd_node tear down.Process A and B may trigger a race as shown in dmesg log.This patch is to resolve the race by adding an atomic kfd_process counterkfd_processes_count, it increment as create kfd process, decrement asfinish kfd_process_wq_release.v2: Put kfd_processes_count per kfd_dev, move decrement to kfd_process_destroy_pddsand bug fix. (Philip Yang)[3966658.307702] divide error: 0000 [#1] SMP NOPTI[3966658.350818] i10nm_edac[3966658.356318] CPU: 124 PID: 38435 Comm: kworker/124:0 Kdump: loaded Tainted[3966658.356890] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu][3966658.362839] nfit[3966658.366457] RIP: 0010:kfd_get_num_sdma_engines+0x17/0x40 [amdgpu][3966658.366460] Code: 00 00 e9 ac 81 02 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 48 8b 4f 08 48 8b b7 00 01 00 00 8b 81 58 26 03 00 99 be b8 01 00 00 80 b9 70 2e 00 00 00 74 0b 83 f8 02 ba 02 00 00[3966658.380967] x86_pkg_temp_thermal[3966658.391529] RSP: 0018:ffffc900a0edfdd8 EFLAGS: 00010246[3966658.391531] RAX: 0000000000000008 RBX: ffff8974e593b800 RCX: ffff888645900000[3966658.391531] RDX: 0000000000000000 RSI: ffff888129154400 RDI: ffff888129151c00[3966658.391532] RBP: ffff8883ad79d400 R08: 0000000000000000 R09: ffff8890d2750af4[3966658.391532] R10: 0000000000000018 R11: 0000000000000018 R12: 0000000000000000[3966658.391533] R13: ffff8883ad79d400 R14: ffffe87ff662ba00 R15: ffff8974e593b800[3966658.391533] FS: 0000000000000000(0000) GS:ffff88fe7f600000(0000) knlGS:0000000000000000[3966658.391534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[3966658.391534] CR2: 0000000000d71000 CR3: 000000dd0e970004 CR4: 0000000002770ee0[3966658.391535] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[3966658.391535] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400[3966658.391536] PKRU: 55555554[3966658.391536] Call Trace:[3966658.391674] deallocate_sdma_queue+0x38/0xa0 [amdgpu][3966658.391762] process_termination_cpsch+0x1ed/0x480 [amdgpu][3966658.399754] intel_powerclamp[3966658.402831] kfd_process_dequeue_from_all_devices+0x5b/0xc0 [amdgpu][3966658.402908] kfd_process_wq_release+0x1a/0x1a0 [amdgpu][3966658.410516] coretemp[3966658.434016] process_one_work+0x1ad/0x380[3966658.434021] worker_thread+0x49/0x310[3966658.438963] kvm_intel[3966658.446041] ? process_one_work+0x380/0x380[3966658.446045] kthread+0x118/0x140[3966658.446047] ? __kthread_bind_mask+0x60/0x60[3966658.446050] ret_from_fork+0x1f/0x30[3966658.446053] Modules linked in: kpatch_20765354(OEK)[3966658.455310] kvm[3966658.464534] mptcp_diag xsk_diag raw_diag unix_diag af_packet_diag netlink_diag udp_diag act_pedit act_mirred act_vlan cls_flower kpatch_21951273(OEK) kpatch_18424469(OEK) kpatch_19749756(OEK)[3966658.473462] idxd_mdev[3966658.482306] kpatch_17971294(OEK) sch_ingress xt_conntrack amdgpu(OE) amdxcp(OE) amddrm_buddy(OE) amd_sched(OE) amdttm(OE) amdkcl(OE) intel_ifs iptable_mangle tcm_loop target_core_pscsi tcp_diag target_core_file inet_diag target_core_iblock target_core_user target_core_mod coldpgs kpatch_18383292(OEK) ip6table_nat ip6table_filter ip6_tables ip_set_hash_ipportip ip_set_hash_ipportnet ip_set_hash_ipport ip_set_bitmap_port xt_comment iptable_nat nf_nat iptable_filter ip_tables ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sn_core_odd(OE) i40e overlay binfmt_misc tun bonding(OE) aisqos(OE) aisqo---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: nxp: imx8-isi: Fix streaming cleanup on releaseThe current implementation unconditionally callsmxc_isi_video_cleanup_streaming() in mxc_isi_video_release(). This canlead to situations where any release call (like from a simple"v4l2-ctl -l") may release a currently streaming queue when called onsuch a device.This is reproducible on an i.MX8MP board by streaming from an ISIcapture device using gstreamer: gst-launch-1.0 -v v4l2src device=/dev/videoX ! \ video/x-raw,format=GRAY8,width=1280,height=800,framerate=1/120 ! \ fakesinkWhile this stream is running, querying the caps of the same deviceprovokes the error state: v4l2-ctl -l -d /dev/videoXThis results in the following trace:[ 155.452152] ------------[ cut here ]------------[ 155.452163] WARNING: CPU: 0 PID: 1708 at drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c:713 mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi][ 157.004248] Modules linked in: cfg80211 rpmsg_ctrl rpmsg_char rpmsg_tty virtio_rpmsg_bus rpmsg_ns rpmsg_core rfkill nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables mcp251x6[ 157.053499] CPU: 0 UID: 0 PID: 1708 Comm: python3 Not tainted 6.15.4-00114-g1f61ca5cad76 #1 PREEMPT[ 157.064369] Hardware name: imx8mp_board_01 (DT)[ 157.068205] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 157.075169] pc : mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi][ 157.081195] lr : mxc_isi_pipe_irq_handler+0x38/0x1b0 [imx8_isi][ 157.087126] sp : ffff800080003ee0[ 157.090438] x29: ffff800080003ee0 x28: ffff0000c3688000 x27: 0000000000000000[ 157.097580] x26: 0000000000000000 x25: ffff0000c1e7ac00 x24: ffff800081b5ad50[ 157.104723] x23: 00000000000000d1 x22: 0000000000000000 x21: ffff0000c25e4000[ 157.111866] x20: 0000000060000200 x19: ffff80007a0608d0 x18: 0000000000000000[ 157.119008] x17: ffff80006a4e3000 x16: ffff800080000000 x15: 0000000000000000[ 157.126146] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000[ 157.133287] x11: 0000000000000040 x10: ffff0000c01445f0 x9 : ffff80007a053a38[ 157.140425] x8 : ffff0000c04004b8 x7 : 0000000000000000 x6 : 0000000000000000[ 157.147567] x5 : ffff0000c0400490 x4 : ffff80006a4e3000 x3 : ffff0000c25e4000[ 157.154706] x2 : 0000000000000000 x1 : ffff8000825c0014 x0 : 0000000060000200[ 157.161850] Call trace:[ 157.164296] mxc_isi_pipe_irq_handler+0x19c/0x1b0 [imx8_isi] (P)[ 157.170319] __handle_irq_event_percpu+0x58/0x218[ 157.175029] handle_irq_event+0x54/0xb8[ 157.178867] handle_fasteoi_irq+0xac/0x248[ 157.182968] handle_irq_desc+0x48/0x68[ 157.186723] generic_handle_domain_irq+0x24/0x38[ 157.191346] gic_handle_irq+0x54/0x120[ 157.195098] call_on_irq_stack+0x24/0x30[ 157.199027] do_interrupt_handler+0x88/0x98[ 157.203212] el0_interrupt+0x44/0xc0[ 157.206792] __el0_irq_handler_common+0x18/0x28[ 157.211328] el0t_64_irq_handler+0x10/0x20[ 157.215429] el0t_64_irq+0x198/0x1a0[ 157.219009] ---[ end trace 0000000000000000 ]---Address this issue by moving the streaming preparation and cleanup tothe vb2 .prepare_streaming() and .unprepare_streaming() operations. Thisalso simplifies the driver by allowing direct usage of thevb2_ioctl_streamon() and vb2_ioctl_streamoff() helpers, and removal ofthe manual cleanup from mxc_isi_video_release().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:blk-cgroup: fix possible deadlock while configuring policyFollowing deadlock can be triggered easily by lockdep:WARNING: possible circular locking dependency detected6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted------------------------------------------------------check/1334 is trying to acquire lock:ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180but task is already holding lock:ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110which lock already depends on the new lock.the existing dependency chain (in reverse order) is:-> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}: blk_queue_enter+0x40b/0x470 blkg_conf_prep+0x7b/0x3c0 tg_set_limit+0x10a/0x3e0 cgroup_file_write+0xc6/0x420 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e-> #1 (&q->rq_qos_mutex){+.+.}-{4:4}: __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 wbt_init+0x17e/0x280 wbt_enable_default+0xe9/0x140 blk_register_queue+0x1da/0x2e0 __add_disk+0x38c/0x5d0 add_disk_fwnode+0x89/0x250 device_add_disk+0x18/0x30 virtblk_probe+0x13a3/0x1800 virtio_dev_probe+0x389/0x610 really_probe+0x136/0x620 __driver_probe_device+0xb3/0x230 driver_probe_device+0x2f/0xe0 __driver_attach+0x158/0x250 bus_for_each_dev+0xa9/0x130 driver_attach+0x26/0x40 bus_add_driver+0x178/0x3d0 driver_register+0x7d/0x1c0 __register_virtio_driver+0x2c/0x60 virtio_blk_init+0x6f/0xe0 do_one_initcall+0x94/0x540 kernel_init_freeable+0x56a/0x7b0 kernel_init+0x2b/0x270 ret_from_fork+0x268/0x4c0 ret_from_fork_asm+0x1a/0x30-> #0 (&q->sysfs_lock){+.+.}-{4:4}: __lock_acquire+0x1835/0x2940 lock_acquire+0xf9/0x450 __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 blk_unregister_queue+0x53/0x180 __del_gendisk+0x226/0x690 del_gendisk+0xba/0x110 sd_remove+0x49/0xb0 [sd_mod] device_remove+0x87/0xb0 device_release_driver_internal+0x11e/0x230 device_release_driver+0x1a/0x30 bus_remove_device+0x14d/0x220 device_del+0x1e1/0x5a0 __scsi_remove_device+0x1ff/0x2f0 scsi_remove_device+0x37/0x60 sdev_store_delete+0x77/0x100 dev_attr_store+0x1f/0x40 sysfs_kf_write+0x65/0x90 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7eother info that might help us debug this:Chain exists of: &q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#3); lock(&q->rq_qos_mutex); lock(&q->q_usage_counter(queue)#3); lock(&q->sysfs_lock);Root cause is that queue_usage_counter is grabbed with rq_qos_mutexheld in blkg_conf_prep(), while queue should be freezed beforerq_qos_mutex from other context.The blk_queue_enter() from blkg_conf_prep() is used to protect againstpolicy deactivation, which is already protected with blkcg_mutex, henceconvert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,consider that blkcg_mutex is held after queue is freezed from policydeactivation, also convert blkg_alloc() to use GFP_NOIO.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAPAs reported by Luiz Capitulino enabling HVO on s390 leads to reproduciblecrashes. The problem is that kernel page tables are modified withoutflushing corresponding TLB entries.Even if it looks like the empty flush_tlb_all() implementation on s390 isthe problem, it is actually a different problem: on s390 it is not allowedto replace an active/valid page table entry with another valid page tableentry without the detour over an invalid entry. A direct replacement maylead to random crashes and/or data corruption.In order to invalidate an entry special instructions have to be used(e.g. ipte or idte). Alternatively there are also special instructionsavailable which allow to replace a valid entry with a different validentry (e.g. crdte or cspg).Given that the HVO code currently does not provide the hooks to allow foran implementation which is compliant with the s390 architecturerequirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which isbasically a revert of the original patch which enabled it.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/xe/guc: Add devm release action to safely tear down CTWhen a buffer object (BO) is allocated with the XE_BO_FLAG_GGTT_INVALIDATEflag, the driver initiates TLB invalidation requests via the CTB mechanismwhile releasing the BO. However a premature release of the CTB BO can leadto system crashes, as observed in:Oops: Oops: 0000 [#1] SMP NOPTIRIP: 0010:h2g_write+0x2f3/0x7c0 [xe]Call Trace: guc_ct_send_locked+0x8b/0x670 [xe] xe_guc_ct_send_locked+0x19/0x60 [xe] send_tlb_invalidation+0xb4/0x460 [xe] xe_gt_tlb_invalidation_ggtt+0x15e/0x2e0 [xe] ggtt_invalidate_gt_tlb.part.0+0x16/0x90 [xe] ggtt_node_remove+0x110/0x140 [xe] xe_ggtt_node_remove+0x40/0xa0 [xe] xe_ggtt_remove_bo+0x87/0x250 [xe]Introduce a devm-managed release action during xe_guc_ct_init() andxe_guc_ct_init_post_hwconfig() to ensure proper CTB disablement beforeresource deallocation, preventing the use-after-free scenario.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bnxt_en: Fix null pointer dereference in bnxt_bs_trace_check_wrap()With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCERfor FW trace data type that has not been initialized. This will resultin a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for avalid magic_byte pointer before proceeding.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Add bpf_prog_run_data_pointers()syzbot found that cls_bpf_classify() is able to changetc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:Extend qdisc control block with tc control block"), which added a wronginteraction with db58ba459202 ("bpf: wire in data and data_end forcls_act_bpf").drop_reason was added later.Add bpf_prog_run_data_pointers() helper to save/restore the net_schedstorage colliding with BPF data_meta/data_end.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pmdomain: arm: scmi: Fix genpd leak on provider registration failureIf of_genpd_add_provider_onecell() fails during probe, the previouslycreated generic power domains are not removed, leading to a memory leakand potential kernel crash later in genpd_debug_add().Add proper error handling to unwind the initialized domains beforereturning from probe to ensure all resources are correctly released onfailure.Example crash trace observed without this fix: | Unable to handle kernel paging request at virtual address fffffffffffffc70 | CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : genpd_debug_add+0x2c/0x160 | lr : genpd_debug_init+0x74/0x98 | Call trace: | genpd_debug_add+0x2c/0x160 (P) | genpd_debug_init+0x74/0x98 | do_one_initcall+0xd0/0x2d8 | do_initcall_level+0xa0/0x140 | do_initcalls+0x60/0xa8 | do_basic_setup+0x28/0x40 | kernel_init_freeable+0xe8/0x170 | kernel_init+0x2c/0x140 | ret_from_fork+0x10/0x20
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_ct: add seqadj extension for natted connectionsSequence adjustment may be required for FTP traffic with PASV/EPSV modes.due to need to re-write packet payload (IP, port) on the ftp controlconnection. This can require changes to the TCP length and expectedseq / ack_seq.The easiest way to reproduce this issue is with PASV mode.Example ruleset:table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" }}table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } }}Note that the ftp helper gets assigned *after* the dnat setup.The inverse (nat after helper assign) is handled by an existingcheck in nf_nat_setup_info() and will not show the problem.Topoloy: +-------------------+ +----------------------------------+ | FTP: 192.168.13.2 | <-> | NAT: 192.168.13.3, 192.168.100.1 | +-------------------+ +----------------------------------+ | +-----------------------+ | Client: 192.168.100.2 | +-----------------------+ftp nat changes do not work as expected in this case:Connected to 192.168.100.1.[..]ftp> epsvEPSV/EPRT on IPv4 off.ftp> ls227 Entering passive mode (192,168,100,1,209,129).421 Service not available, remote server has closed connection.Kernel logs:Missing nfct_seqadj_ext_add() setup callWARNING: CPU: 1 PID: 0 at net/netfilter/nf_conntrack_seqadj.c:41[..] __nf_nat_mangle_tcp_packet+0x100/0x160 [nf_nat] nf_nat_ftp+0x142/0x280 [nf_nat_ftp] help+0x4d1/0x880 [nf_conntrack_ftp] nf_confirm+0x122/0x2e0 [nf_conntrack] nf_hook_slow+0x3c/0xb0 ..Fix this by adding the required extension when a conntrack helper is assignedto a connection that has a nat binding.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mlx5: Fix default values in create CQCurrently, CQs without a completion function are assigned themlx5_add_cq_to_tasklet function by default. This is problematic sinceonly user CQs created through the mlx5_ib driver are intended to usethis function.Additionally, all CQs that will use doorbells instead of polling forcompletions must call mlx5_cq_arm. However, the default CQ creation flowleaves a valid value in the CQ's arm_db field, allowing FW to sendinterrupts to polling-only CQs in certain corner cases.These two factors would allow a polling-only kernel CQ to be triggeredby an EQ interrupt and call a completion function intended only for userCQs, causing a null pointer exception.Some areas in the driver have prevented this issue with one-off fixesbut did not address the root cause.This patch fixes the described issue by adding defaults to the create CQflow. It adds a default dummy completion function to protect againstnull pointer exceptions, and it sets an invalid command sequence numberby default in kernel CQs to prevent the FW from sending an interrupt tothe CQ until it is armed. User CQs are responsible for their owninitialization values.Callers of mlx5_core_create_cq are responsible for changing thecompletion function and arming the CQ per their needs.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ksm: use range-walk function to jump over holes in scan_get_next_rmap_itemCurrently, scan_get_next_rmap_item() walks every page address in a VMA tolocate mergeable pages. This becomes highly inefficient when scanninglarge virtual memory areas that contain mostly unmapped regions, causingksmd to use large amount of cpu without deduplicating much pages.This patch replaces the per-address lookup with a range walk usingwalk_page_range(). The range walker allows KSM to skip over entireunmapped holes in a VMA, avoiding unnecessary lookups. This problem waspreviously discussed in [1].Consider the following test program which creates a 32 TiB mapping in thevirtual address space but only populates a single page:#include #include #include /* 32 TiB */const size_t size = 32ul * 1024 * 1024 * 1024 * 1024;int main() { char *area = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_NORESERVE | MAP_PRIVATE | MAP_ANON, -1, 0); if (area == MAP_FAILED) { perror("mmap() failed\n"); return -1; } /* Populate a single page such that we get an anon_vma. */ *area = 0; /* Enable KSM. */ madvise(area, size, MADV_MERGEABLE); pause(); return 0;}$ ./ksm-sparse &$ echo 1 > /sys/kernel/mm/ksm/run Without this patch ksmd uses 100% of the cpu for a long time (more then 1hour in my test machine) scanning all the 32 TiB virtual address spacethat contain only one mapped page. This makes ksmd essentially deadlockednot able to deduplicate anything of value. With this patch ksmd walksonly the one mapped page and skips the rest of the 32 TiB virtual addressspace, making the scan fast using little cpu.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:timers: Fix NULL function pointer race in timer_shutdown_sync()There is a race condition between timer_shutdown_sync() and timerexpiration that can lead to hitting a WARN_ON in expire_timers().The issue occurs when timer_shutdown_sync() clears the timer functionto NULL while the timer is still running on another CPU. The racescenario looks like this:CPU0 CPU1 lock_timer_base() expire_timers() base->running_timer = timer; unlock_timer_base() [call_timer_fn enter] mod_timer() ...timer_shutdown_sync()lock_timer_base()// For now, will not detach the timer but only clear its function to NULLif (base->running_timer != timer) ret = detach_if_pending(timer, base, true);if (shutdown) timer->function = NULL;unlock_timer_base() [call_timer_fn exit] lock_timer_base() base->running_timer = NULL; unlock_timer_base() ... // Now timer is pending while its function set to NULL. // next timer trigger expire_timers() WARN_ON_ONCE(!fn) // hit ...lock_timer_base()// Now timer will detachif (base->running_timer != timer) ret = detach_if_pending(timer, base, true);if (shutdown) timer->function = NULL;unlock_timer_base()The problem is that timer_shutdown_sync() clears the timer functionregardless of whether the timer is currently running. This can leave apending timer with a NULL function pointer, which triggers theWARN_ON_ONCE(!fn) check in expire_timers().Fix this by only clearing the timer function when actually detaching thetimer. If the timer is running, leave the function pointer intact, which issafe because the timer will be properly detached when it finishes running.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ice: fix PTP cleanup on driver removal in error pathImprove the cleanup on releasing PTP resources in error path.The error case might happen either at the driver probe and PTPfeature initialization or on PTP restart (errors in reset handling, NVMupdate etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pffunction) and 'ps_lock' mutex deinitialization were missed.Additionally, ptp clock was not unregistered in the latter case.Keep PTP state as 'uninitialized' on init to distinguish between errorscenarios and to avoid resource release duplication at driver removal.The consequence of missing ice_ptp_cleanup_pf call is the following calltrace dumped when ice_adapter object is freed (port list is not empty,as it is required at this stage):[ T93022] ------------[ cut here ]------------[ T93022] WARNING: CPU: 10 PID: 93022 atice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice]...[ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice]...[ T93022] Call Trace:[ T93022] [ T93022] ? ice_adapter_put+0xef/0x100 [ice33d2647ad4f6d866d41eefff1806df37c68aef0c][ T93022] ? __warn.cold+0xb0/0x10e[ T93022] ? ice_adapter_put+0xef/0x100 [ice33d2647ad4f6d866d41eefff1806df37c68aef0c][ T93022] ? report_bug+0xd8/0x150[ T93022] ? handle_bug+0xe9/0x110[ T93022] ? exc_invalid_op+0x17/0x70[ T93022] ? asm_exc_invalid_op+0x1a/0x20[ T93022] ? ice_adapter_put+0xef/0x100 [ice33d2647ad4f6d866d41eefff1806df37c68aef0c][ T93022] pci_device_remove+0x42/0xb0[ T93022] device_release_driver_internal+0x19f/0x200[ T93022] driver_detach+0x48/0x90[ T93022] bus_remove_driver+0x70/0xf0[ T93022] pci_unregister_driver+0x42/0xb0[ T93022] ice_module_exit+0x10/0xdb0 [ice33d2647ad4f6d866d41eefff1806df37c68aef0c]...[ T93022] ---[ end trace 0000000000000000 ]---[ T93022] ice: module unloaded
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: fix memory leak in smb3_fs_context_parse_param error pathAdd proper cleanup of ctx->source and fc->source to thecifs_parse_mount_err error handler. This ensures that memory allocatedfor the source strings is correctly freed on all error paths, matchingthe cleanup already performed in the success path bysmb3_cleanup_fs_context_contents().Pointers are also set to NULL after freeing to prevent potentialdouble-free issues.This change fixes a memory leak originally detected by syzbot. Theleak occurred when processing Opt_source mount options if an errorhappened after ctx->source and fc->source were successfullyallocated but before the function completed.The specific leak sequence was:1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory3. A subsequent error jumps to cifs_parse_mount_err4. The old error handler freed passwords but not the source strings,causing the memory to leak.This issue was not addressed by commit e8c73eb7db0a ("cifs: client:fix memory leak in smb3_fs_context_parse_param"), which only fixedleaks from repeated fsconfig() calls but not this error path.Patch updated with minor change suggested by kernel test robot
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: Fix proto fallback detection with BPFThe sockmap feature allows bpf syscall from userspace, or basedon bpf sockops, replacing the sk_prot of sockets during protocol stackprocessing with sockmap's custom read/write interfaces.'''tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot'''When the server has MPTCP enabled but the client sends a TCP SYNwithout MPTCP, subflow_syn_recv_sock() performs a fallback on thesubflow, replacing the subflow sk's sk_prot with the native sk_prot.'''subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override()'''Then, this subflow can be normally used by sockmap, which replaces thenative sk_prot with sockmap's custom sk_prot. The issue occurs when theuser executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops().Here, it uses sk->sk_prot to compare with the native sk_prot, but thisis incorrect when sockmap is used, as we may incorrectly setsk->sk_socket->ops.This fix uses the more generic sk_family for the comparison instead.Additionally, this also prevents a WARNING from occurring:result from ./scripts/decode_stacktrace.sh:------------[ cut here ]------------WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \(net/mptcp/protocol.c:4005)Modules linked in:...PKRU: 55555554Call Trace:do_accept (net/socket.c:1989)__sys_accept4 (net/socket.c:2028 net/socket.c:2057)__x64_sys_accept (net/socket.c:2067)x64_sys_call (arch/x86/entry/syscall_64.c:41)do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)RIP: 0033:0x7f87ac92b83d---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show()If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and weattempt to dereference it in tcm_loop_tpg_address_show() we will get asegfault, see below for an example. So, check tl_hba->sh beforedereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop]... Call Trace: configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0...
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/mempool: fix poisoning order>0 pages with HIGHMEMThe kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283)Christoph found out this is due to the poisoning code not dealingproperly with CONFIG_HIGHMEM because only the first page is mapped butthen the whole potentially high-order page is accessed.We could give up on HIGHMEM here, but it's straightforward to fix thiswith a loop that's mapping, poisoning or checking and unmappingindividual pages.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:binfmt_misc: restore write access before closing files opened by open_exec()bm_register_write() opens an executable file using open_exec(), whichinternally calls do_open_execat() and denies write access on the file toavoid modification while it is being executed.However, when an error occurs, bm_register_write() closes the file usingfilp_close() directly. This does not restore the write permission, whichmay cause subsequent write operations on the same file to fail.Fix this by calling exe_file_allow_write_access() before filp_close() torestore the write permission properly.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: route: Prevent rt_bind_exception() from rebinding stale fnheThe sit driver's packet transmission path calls: sit_tunnel_xmit() ->update_or_create_fnhe(), which lead to fnhe_remove_oldest() being calledto delete entries exceeding FNHE_RECLAIM_DEPTH+random.The race window is between fnhe_remove_oldest() selecting fnheX fordeletion and the subsequent kfree_rcu(). During this time, theconcurrent path's __mkroute_output() -> find_exception() can fetch thesoon-to-be-deleted fnheX, and rt_bind_exception() then binds it with anew dst using a dst_hold(). When the original fnheX is freed via RCU,the dst reference remains permanently leaked.CPU 0 CPU 1__mkroute_output() find_exception() [fnheX] update_or_create_fnhe() fnhe_remove_oldest() [fnheX] rt_bind_exception() [bind dst] RCU callback [fnheX freed, dst leak]This issue manifests as a device reference count leak and a warning indmesg when unregistering the net device: unregister_netdevice: waiting for sitX to become free. Usage count = NIdo Schimmel provided the simple test validation method [1].The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes().Since rt_bind_exception() checks this field, setting it to zero preventsthe stale fnhe from being reused and bound to a new dst just before itis freed.[1]ip netns add ns1ip -n ns1 link set dev lo upip -n ns1 address add 192.0.2.1/32 dev loip -n ns1 link add name dummy1 up type dummyip -n ns1 route add 192.0.2.2/32 dev dummy1ip -n ns1 link add name gretap1 up arp off type gretap \ local 192.0.2.1 remote 192.0.2.2ip -n ns1 route add 198.51.0.0/16 dev gretap1taskset -c 0 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &taskset -c 2 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &sleep 10ip netns pids ns1 | xargs killip netns del ns1
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: netpoll: fix incorrect refcount handling causing incorrect cleanupcommit efa95b01da18 ("netpoll: fix use after free") incorrectlyignored the refcount and prematurely set dev->npinfo to NULL duringnetpoll cleanup, leading to improper behavior and memory leaks.Scenario causing lack of proper cleanup:1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is allocated, and refcnt = 1 - Keep in mind that npinfo is shared among all netpoll instances. In this case, there is just one.2) Another netpoll is also associated with the same NIC and npinfo->refcnt += 1. - Now dev->npinfo->refcnt = 2; - There is just one npinfo associated to the netdev.3) When the first netpolls goes to clean up: - The first cleanup succeeds and clears np->dev->npinfo, ignoring refcnt. - It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);` - Set dev->npinfo = NULL, without proper cleanup - No ->ndo_netpoll_cleanup() is either called4) Now the second target tries to clean up - The second cleanup fails because np->dev->npinfo is already NULL. * In this case, ops->ndo_netpoll_cleanup() was never called, and the skb pool is not cleaned as well (for the second netpoll instance) - This leaks npinfo and skbpool skbs, which is clearly reported by kmemleak.Revert commit efa95b01da18 ("netpoll: fix use after free") and addsclarifying comments emphasizing that npinfo cleanup should only happenonce the refcount reaches zero, ensuring stable and correct netpollbehavior.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:erofs: avoid infinite loops due to corrupted subpage compact indexesRobert reported an infinite loop observed by two crafted images.The root cause is that `clusterofs` can be larger than `lclustersize`for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.: blocksize = lclustersize = 512 lcn = 6 clusterofs = 515Move the corresponding check for full compress indexes to`z_erofs_load_lcluster_from_disk()` to also cover subpage compactcompress indexes.It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`check, since it should be placed right after`z_erofs_load_{compact,full}_lcluster()`.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: SVM: Don't skip unrelated instruction if INT3/INTO is replacedWhen re-injecting a soft interrupt from an INT3, INT0, or (select) INTninstruction, discard the exception and retry the instruction if the codestream is changed (e.g. by a different vCPU) between when the CPUexecutes the instruction and when KVM decodes the instruction to get thenext RIP.As effectively predicted by commit 6ef88d6e36c2 ("KVM: SVM: Re-injectINT3/INTO instead of retrying the instruction"), failure to verify thatthe correct INTn instruction was decoded can effectively clobber gueststate due to decoding the wrong instruction and thus specifying thewrong next RIP.The bug most often manifests as "Oops: int3" panics on static branchchecks in Linux guests. Enabling or disabling a static branch in Linuxuses the kernel's "text poke" code patching mechanism. To modify codewhile other CPUs may be executing that code, Linux (temporarily)replaces the first byte of the original instruction with an int3 (opcode0xcc), then patches in the new code stream except for the first byte,and finally replaces the int3 with the first byte of the new codestream. If a CPU hits the int3, i.e. executes the code while it's beingmodified, then the guest kernel must look up the RIP to determine how tohandle the #BP, e.g. by emulating the new instruction. If the RIP isincorrect, then this lookup fails and the guest kernel panics.The bug reproduces almost instantly by hacking the guest kernel torepeatedly check a static branch[1] while running a drgn script[2] onthe host to constantly swap out the memory containing the guest's TSS.[1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a[2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: add i_data_sem protection in ext4_destroy_inline_data_nolock()Fix a race between inline data destruction and block mapping.The function ext4_destroy_inline_data_nolock() changes the inode datalayout by clearing EXT4_INODE_INLINE_DATA and setting EXT4_INODE_EXTENTS.At the same time, another thread may execute ext4_map_blocks(), whichtests EXT4_INODE_EXTENTS to decide whether to call ext4_ext_map_blocks()or ext4_ind_map_blocks().Without i_data_sem protection, ext4_ind_map_blocks() may receive inodewith EXT4_INODE_EXTENTS flag and triggering assert.kernel BUG at fs/ext4/indirect.c:546!EXT4-fs (loop2): unmounting filesystem.invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTIHardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014RIP: 0010:ext4_ind_map_blocks.cold+0x2b/0x5a fs/ext4/indirect.c:546Call Trace: ext4_map_blocks+0xb9b/0x16f0 fs/ext4/inode.c:681 _ext4_get_block+0x242/0x590 fs/ext4/inode.c:822 ext4_block_write_begin+0x48b/0x12c0 fs/ext4/inode.c:1124 ext4_write_begin+0x598/0xef0 fs/ext4/inode.c:1255 ext4_da_write_begin+0x21e/0x9c0 fs/ext4/inode.c:3000 generic_perform_write+0x259/0x5d0 mm/filemap.c:3846 ext4_buffered_write_iter+0x15b/0x470 fs/ext4/file.c:285 ext4_file_write_iter+0x8e0/0x17f0 fs/ext4/file.c:679 call_write_iter include/linux/fs.h:2271 [inline] do_iter_readv_writev+0x212/0x3c0 fs/read_write.c:735 do_iter_write+0x186/0x710 fs/read_write.c:861 vfs_iter_write+0x70/0xa0 fs/read_write.c:902 iter_file_splice_write+0x73b/0xc90 fs/splice.c:685 do_splice_from fs/splice.c:763 [inline] direct_splice_actor+0x10f/0x170 fs/splice.c:950 splice_direct_to_actor+0x33a/0xa10 fs/splice.c:896 do_splice_direct+0x1a9/0x280 fs/splice.c:1002 do_sendfile+0xb13/0x12c0 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In 0.9-rc2 and earlier, an unprivileged local users can crash avahi-daemon (with wide-area disabled) by creating record browsers with the AVAHI_LOOKUP_USE_WIDE_AREA flag set via D-Bus. This can be done by either callingthe RecordBrowserNew method directly or creating hostname/address/service resolvers/browsers that create those browsers internally themselves.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libavahi-client3 > 0-0 (version in image is 0.8-150600.15.9.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: gadget: udc: fix use-after-free in usb_gadget_state_workA race condition during gadget teardown can lead to a use-after-freein usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_workThe fundamental race occurs because a concurrent event (e.g., aninterrupt) can call usb_gadget_set_state() and schedule gadget->workat any time during the cleanup process in usb_del_gadget().Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue afterdevice removal") attempted to fix this by moving flush_work() to afterdevice_del(). However, this does not fully solve the race, as a newwork item can still be scheduled *after* flush_work() completes butbefore the gadget's memory is freed, leading to the same use-after-free.This patch fixes the race condition robustly by introducing a 'teardown'flag and a 'state_lock' spinlock to the usb_gadget struct. The flag isset during cleanup in usb_del_gadget() *before* calling flush_work() toprevent any new work from being scheduled once cleanup has commenced.The scheduling site, usb_gadget_set_state(), now checks this flag underthe lock before queueing the work, thus safely closing the race window.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: fix memory leak in cifs_construct_tcon()When having a multiuser mount with domain= specified and usingcifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname,so it needs to be freed before leaving cifs_construct_tcon().This fixes the following memory leak reported by kmemleak: mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,... su - testuser cifscreds add -d ZELDA -u testuser ... ls /mnt/1 ... umount /mnt echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8881203c3f08 (size 8): comm "ls", pid 5060, jiffies 4307222943 hex dump (first 8 bytes): 5a 45 4c 44 41 00 cc cc ZELDA... backtrace (crc d109a8cf): __kmalloc_node_track_caller_noprof+0x572/0x710 kstrdup+0x3a/0x70 cifs_sb_tlink+0x1209/0x1770 [cifs] cifs_get_fattr+0xe1/0xf50 [cifs] cifs_get_inode_info+0xb5/0x240 [cifs] cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs] cifs_getattr+0x28e/0x450 [cifs] vfs_getattr_nosec+0x126/0x180 vfs_statx+0xf6/0x220 do_statx+0xab/0x110 __x64_sys_statx+0xd5/0x130 do_syscall_64+0xbb/0x380 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setupProtect vga_switcheroo_client_fb_set() with console lock. Avoids OOBaccess in fbcon_remap_all(). Without holding the console lock the callraces with switching outputs.VGA switcheroo calls fbcon_remap_all() when switching clients. The fbconfunction uses struct fb_info.node, which is set by register_framebuffer().As the fb-helper code currently sets up VGA switcheroo before registeringthe framebuffer, the value of node is -1 and therefore not a legal value.For example, fbcon uses the value within set_con2fb_map() [1] as an indexinto an array.Moving vga_switcheroo_client_fb_set() after register_framebuffer() canresult in VGA switching that does not switch fbcon correctly.Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),which already holds the console lock. Fbdev calls fbcon_fb_registered()from within register_framebuffer(). Serializes the helper with VGAswitcheroo's call to fbcon_remap_all().Although vga_switcheroo_client_fb_set() takes an instance of struct fb_infoas parameter, it really only needs the contained fbcon state. Moving thecall to fbcon initialization is therefore cleaner than before. Only amdgpu,i915, nouveau and radeon support vga_switcheroo. For all other drivers,this change does nothing.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix crash in process_v2_sparse_read() for encrypted directoriesThe crash in process_v2_sparse_read() for fscrypt-encrypted directorieshas been reported. Issue takes place for Ceph msgr2 protocol in securemode. It can be reproduced by the steps:sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure(1) mkdir /mnt/cephfs/fscrypt-test-3(2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3(3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3(4) fscrypt lock /mnt/cephfs/fscrypt-test-3(5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3(6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar(7) Issue has been triggered[ 408.072247] ------------[ cut here ]------------[ 408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865ceph_con_v2_try_read+0x4b39/0x72f0[ 408.072267] Modules linked in: intel_rapl_msr intel_rapl_commonintel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discoverypmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypasspolyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouseserio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfgpata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore[ 408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+[ 408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS1.17.0-5.fc42 04/01/2014[ 408.072310] Workqueue: ceph-msgr ceph_con_workfn[ 408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0[ 408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f88e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85[ 408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246[ 408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38[ 408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000[ 408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8[ 408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8[ 408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000[ 408.072329] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000)knlGS:0000000000000000[ 408.072331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0[ 408.072336] PKRU: 55555554[ 408.072337] Call Trace:[ 408.072338] [ 408.072340] ? sched_clock_noinstr+0x9/0x10[ 408.072344] ? __pfx_ceph_con_v2_try_read+0x10/0x10[ 408.072347] ? _raw_spin_unlock+0xe/0x40[ 408.072349] ? finish_task_switch.isra.0+0x15d/0x830[ 408.072353] ? __kasan_check_write+0x14/0x30[ 408.072357] ? mutex_lock+0x84/0xe0[ 408.072359] ? __pfx_mutex_lock+0x10/0x10[ 408.072361] ceph_con_workfn+0x27e/0x10e0[ 408.072364] ? metric_delayed_work+0x311/0x2c50[ 408.072367] process_one_work+0x611/0xe20[ 408.072371] ? __kasan_check_write+0x14/0x30[ 408.072373] worker_thread+0x7e3/0x1580[ 408.072375] ? __pfx__raw_spin_lock_irqsave+0x10/0x10[ 408.072378] ? __pfx_worker_thread+0x10/0x10[ 408.072381] kthread+0x381/0x7a0[ 408.072383] ? __pfx__raw_spin_lock_irq+0x10/0x10[ 408.072385] ? __pfx_kthread+0x10/0x10[ 408.072387] ? __kasan_check_write+0x14/0x30[ 408.072389] ? recalc_sigpending+0x160/0x220[ 408.072392] ? _raw_spin_unlock_irq+0xe/0x50[ 408.072394] ? calculate_sigpending+0x78/0xb0[ 408.072395] ? __pfx_kthread+0x10/0x10[ 408.072397] ret_from_fork+0x2b6/0x380[ 408.072400] ? __pfx_kthread+0x10/0x10[ 408.072402] ret_from_fork_asm+0x1a/0x30[ 408.072406] [ 408.072407] ---[ end trace 0000000000000000 ]---[ 408.072418] Oops: general protection fault, probably for non-canonicaladdress 0xdffffc00000000---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: atlantic: fix fragment overflow handling in RX pathThe atlantic driver can receive packets with more than MAX_SKB_FRAGS (17)fragments when handling large multi-descriptor packets. This causes anout-of-bounds write in skb_add_rx_frag_netmem() leading to kernel panic.The issue occurs because the driver doesn't check the total number offragments before calling skb_add_rx_frag(). When a packet requires morethan MAX_SKB_FRAGS fragments, the fragment index exceeds the array bounds.Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE,then all fragments are accounted for. And reusing the existing check toprevent the overflow earlier in the code path.This crash occurred in production with an Aquantia AQC113 10G NIC.Stack trace from production environment:```RIP: 0010:skb_add_rx_frag_netmem+0x29/0xd0Code: 90 f3 0f 1e fa 0f 1f 44 00 00 48 89 f8 41 89ca 48 89 d7 48 63 ce 8b 90 c0 00 00 00 48 c1 e1 04 48 01 ca 48 03 90c8 00 00 00 <48> 89 7a 30 44 89 52 3c 44 89 42 38 40 f6 c7 01 75 74 4889 fa 83RSP: 0018:ffffa9bec02a8d50 EFLAGS: 00010287RAX: ffff925b22e80a00 RBX: ffff925ad38d2700 RCX:fffffffe0a0c8000RDX: ffff9258ea95bac0 RSI: ffff925ae0a0c800 RDI:0000000000037a40RBP: 0000000000000024 R08: 0000000000000000 R09:0000000000000021R10: 0000000000000848 R11: 0000000000000000 R12:ffffa9bec02a8e24R13: ffff925ad8615570 R14: 0000000000000000 R15:ffff925b22e80a00FS: 0000000000000000(0000)GS:ffff925e47880000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: ffff9258ea95baf0 CR3: 0000000166022004 CR4:0000000000f72ef0PKRU: 55555554Call Trace:aq_ring_rx_clean+0x175/0xe60 [atlantic]? aq_ring_rx_clean+0x14d/0xe60 [atlantic]? aq_ring_tx_clean+0xdf/0x190 [atlantic]? kmem_cache_free+0x348/0x450? aq_vec_poll+0x81/0x1d0 [atlantic]? __napi_poll+0x28/0x1c0? net_rx_action+0x337/0x420```Changes in v4:- Add Fixes: tag to satisfy patch validation requirements.Changes in v3:- Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE, then all fragments are accounted for.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: sxgbe: fix potential NULL dereference in sxgbe_rx()Currently, when skb is null, the driver prints an error and thendereferences skb on the next line.To fix this, let's add a 'break' after the error message to switchto sxgbe_rx_refill(), which is similar to the approach taken by theother drivers in this particular case, e.g. calxeda with xgmac_rx().Found during a code review.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: hci_core: lookup hci_conn on RX path on protocol sideThe hdev lock/lookup/unlock/use pattern in the packet RX path doesn'tensure hci_conn* is not concurrently modified/deleted. This lockingappears to be leftover from before conn_hash started using RCUcommit bf4c63252490b ("Bluetooth: convert conn hash to RCU")and not clear if it had purpose since then.Currently, there are code paths that delete hci_conn* from elsewherethan the ordered hdev->workqueue where the RX work runs in. E.g.commit 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")introduced some of these, and there probably were a few others beforeit. It's better to do the locking so that even if these runconcurrently no UAF is possible.Move the lookup of hci_conn and associated socket-specific conn toprotocol recv handlers, and do them within a single critical sectionto cover hci_conn* usage and lookup.syzkaller has reported a crash that appears to be this issue: [Task hdev->workqueue] [Task 2] hci_disconnect_all_sync l2cap_recv_acldata(hcon) hci_conn_get(hcon) hci_abort_conn_sync(hcon) hci_dev_lock hci_dev_lock hci_conn_del(hcon) v-------------------------------- hci_dev_unlock hci_conn_put(hcon) conn = hcon->l2cap_data (UAF)
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:lan966x: Fix sleeping in atomic contextThe following warning was seen when we try to connect using ssh to the device.BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbearpreempt_count: 1, expected: 0INFO: lockdep is turned off.CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONETainted: [W]=WARNHardware name: Generic DT based systemCall trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __might_resched+0x16c/0x2b0 __might_resched from __mutex_lock+0x64/0xd34 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from lan966x_stats_get+0x5c/0x558 lan966x_stats_get from dev_get_stats+0x40/0x43c dev_get_stats from dev_seq_printf_stats+0x3c/0x184 dev_seq_printf_stats from dev_seq_show+0x10/0x30 dev_seq_show from seq_read_iter+0x350/0x4ec seq_read_iter from seq_read+0xfc/0x194 seq_read from proc_reg_read+0xac/0x100 proc_reg_read from vfs_read+0xb0/0x2b0 vfs_read from ksys_read+0x6c/0xec ksys_read from ret_fast_syscall+0x0/0x1cException stack(0xf0b11fa8 to 0xf0b11ff0)1fa0: 00000001 00001000 00000008 be9048d8 00001000 000000011fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 000000011fe0: 0005404c be9048c0 00018684 b6ec2cd8It seems that we are using a mutex in a atomic context which is wrong.Change the mutex with a spinlock.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_cake: Fix incorrect qlen reduction in cake_dropIn cake_drop(), qdisc_tree_reduce_backlog() is used to update the qlenand backlog of the qdisc hierarchy. Its caller, cake_enqueue(), assumesthat the parent qdisc will enqueue the current packet. However, thisassumption breaks when cake_enqueue() returns NET_XMIT_CN: the parentqdisc stops enqueuing current packet, leaving the tree qlen/backlogaccounting inconsistent. This mismatch can lead to a NULL dereference(e.g., when the parent Qdisc is qfq_qdisc).This patch computes the qlen/backlog delta in a more robust way byobserving the difference before and after the series of cake_drop()calls, and then compensates the qdisc tree accounting if cake_enqueue()returns NET_XMIT_CN.To ensure correct compensation when ACK thinning is enabled, a newvariable is introduced to keep qlen unchanged.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:locking/spinlock/debug: Fix data-race in do_raw_write_lockKCSAN reports:BUG: KCSAN: data-race in do_raw_write_lock / do_raw_write_lockwrite (marked) to 0xffff800009cf504c of 4 bytes by task 1102 on cpu 1: do_raw_write_lock+0x120/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_forkread to 0xffff800009cf504c of 4 bytes by task 1103 on cpu 0: do_raw_write_lock+0x88/0x204 _raw_write_lock_irq do_exit call_usermodehelper_exec_async ret_from_forkvalue changed: 0xffffffff -> 0x00000001Reported by Kernel Concurrency Sanitizer on:CPU: 0 PID: 1103 Comm: kworker/u4:1 6.1.111Commit 1a365e822372 ("locking/spinlock/debug: Fix various data races") hasadressed most of these races, but seems to be not consistent/not complete.>From do_raw_write_lock() only debug_write_lock_after() part has beenconverted to WRITE_ONCE(), but not debug_write_lock_before() part.Do it now.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:jbd2: avoid bug_on in jbd2_journal_get_create_access() when file system corruptedThere's issue when file system corrupted:------------[ cut here ]------------kernel BUG at fs/jbd2/transaction.c:1289!Oops: invalid opcode: 0000 [#1] SMP KASAN PTICPU: 5 UID: 0 PID: 2031 Comm: mkdir Not tainted 6.18.0-rc1-nextRIP: 0010:jbd2_journal_get_create_access+0x3b6/0x4d0RSP: 0018:ffff888117aafa30 EFLAGS: 00010202RAX: 0000000000000000 RBX: ffff88811a86b000 RCX: ffffffff89a63534RDX: 1ffff110200ec602 RSI: 0000000000000004 RDI: ffff888100763010RBP: ffff888100763000 R08: 0000000000000001 R09: ffff888100763028R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000000R13: ffff88812c432000 R14: ffff88812c608000 R15: ffff888120bfc000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f91d6970c99 CR3: 00000001159c4000 CR4: 00000000000006f0Call Trace: __ext4_journal_get_create_access+0x42/0x170 ext4_getblk+0x319/0x6f0 ext4_bread+0x11/0x100 ext4_append+0x1e6/0x4a0 ext4_init_new_dir+0x145/0x1d0 ext4_mkdir+0x326/0x920 vfs_mkdir+0x45c/0x740 do_mkdirat+0x234/0x2f0 __x64_sys_mkdir+0xd6/0x120 do_syscall_64+0x5f/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe above issue occurs with us in errors=continue mode when accompanied bystorage failures. There have been many inconsistencies in the file systemdata.In the case of file system data inconsistency, for example, if the blockbitmap of a referenced block is not set, it can lead to the situation wherea block being committed is allocated and used again. As a result, thefollowing condition will not be satisfied then trigger BUG_ON. Of course,it is entirely possible to construct a problematic image that can triggerthis BUG_ON through specific operations. In fact, I have constructed suchan image and easily reproduced this issue.Therefore, J_ASSERT() holds true only under ideal conditions, but it maynot necessarily be satisfied in exceptional scenarios. Using J_ASSERT()directly in abnormal situations would cause the system to crash, which isclearly not what we want. So here we directly trigger a JBD abort insteadof immediately invoking BUG_ON.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: dsa: microchip: Don't free uninitialized ksz_irqIf something goes wrong at setup, ksz_irq_free() can be called onuninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). Itleads to freeing uninitialized IRQ numbers and/or domains.Use dsa_switch_for_each_user_port_continue_reverse() in the error pathto iterate only over the fully initialized ports.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalidFixes a crash when layout is null during this call stack:write_inode -> nfs4_write_inode -> pnfs_layoutcommit_inodepnfs_set_layoutcommit relies on the lseg refcount to keep the layoutaround. Need to clear NFS_INO_LAYOUTCOMMIT otherwise we might attemptto reference a null layout.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: fix racy bitfield write in btrfs_clear_space_info_full()From the memory-barriers.txt document regarding memory barrier orderingguarantees: (*) These guarantees do not apply to bitfields, because compilers often generate code to modify these using non-atomic read-modify-write sequences. Do not attempt to use bitfields to synchronize parallel algorithms. (*) Even in cases where bitfields are protected by locks, all fields in a given bitfield must be protected by one lock. If two fields in a given bitfield are protected by different locks, the compiler's non-atomic read-modify-write sequences can cause an update to one field to corrupt the value of an adjacent field.btrfs_space_info has a bitfield sharing an underlying word consisting ofthe fields full, chunk_alloc, and flush:struct btrfs_space_info { struct btrfs_fs_info * fs_info; /* 0 8 */ struct btrfs_space_info * parent; /* 8 8 */ ... int clamp; /* 172 4 */ unsigned int full:1; /* 176: 0 4 */ unsigned int chunk_alloc:1; /* 176: 1 4 */ unsigned int flush:1; /* 176: 2 4 */ ...Therefore, to be safe from parallel read-modify-writes losing a write toone of the bitfield members protected by a lock, all writes to all thebitfields must use the lock. They almost universally do, except forbtrfs_clear_space_info_full() which iterates over the space_infos andwrites out found->full = 0 without a lock.Imagine that we have one thread completing a transaction in which wefinished deleting a block_group and are thus callingbtrfs_clear_space_info_full() while simultaneously the data reclaimticket infrastructure is running do_async_reclaim_data_space(): T1 T2btrfs_commit_transaction btrfs_clear_space_info_full data_sinfo->full = 0 READ: full:0, chunk_alloc:0, flush:1 do_async_reclaim_data_space(data_sinfo) spin_lock(&space_info->lock); if(list_empty(tickets)) space_info->flush = 0; READ: full: 0, chunk_alloc:0, flush:1 MOD/WRITE: full: 0, chunk_alloc:0, flush:0 spin_unlock(&space_info->lock); return; MOD/WRITE: full:0, chunk_alloc:0, flush:1and now data_sinfo->flush is 1 but the reclaim worker has exited. Thisbreaks the invariant that flush is 0 iff there is no work queued orrunning. Once this invariant is violated, future allocations that gointo __reserve_bytes() will add tickets to space_info->tickets but willsee space_info->flush is set to 1 and not queue the work. After this,they will block forever on the resulting ticket, as it is now impossibleto kick the worker again.I also confirmed by looking at the assembly of the affected kernel thatit is doing RMW operations. For example, to set the flush (3rd) bit to 0,the assembly is: andb $0xfb,0x60(%rbx)and similarly for setting the full (1st) bit to 0: andb $0xfe,-0x20(%rax)So I think this is really a bug on practical systems. I have observeda number of systems in this exact state, but am currently unable toreproduce it.Rather than leaving this footgun lying around for the future, takeadvantage of the fact that there is room in the struct anyway, and thatit is already quite large and simply change the three bitfield members tobools. This avoids writes to space_info->full having any effect on---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Check skb->transport_header is set in bpf_skb_check_mtuThe bpf_skb_check_mtu helper needs to use skb->transport_header whenthe BPF_MTU_CHK_SEGS flag is used: bpf_skb_check_mtu(skb, ifindex, &mtu_len, 0, BPF_MTU_CHK_SEGS)The transport_header is not always set. There is a WARN_ON_ONCEreport when CONFIG_DEBUG_NET is enabled + skb->gso_size is set +bpf_prog_test_run is used:WARNING: CPU: 1 PID: 2216 at ./include/linux/skbuff.h:3071 skb_gso_validate_network_len bpf_skb_check_mtu bpf_prog_3920e25740a41171_tc_chk_segs_flag # A test in the next patch bpf_test_run bpf_prog_test_run_skbFor a normal ingress skb (not test_run), skb_reset_transport_headeris performed but there is plan to avoid setting it as described incommit 2170a1f09148 ("net: no longer reset transport_header in __netif_receive_skb_core()").This patch fixes the bpf helper by checkingskb_transport_header_was_set(). The check is done just beforeskb->transport_header is used, to avoid breaking the existing bpf prog.The WARN_ON_ONCE is limited to bpf_prog_test_run, so targeting bpf-next.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: relax BUG() to ocfs2_error() in __ocfs2_move_extent()In '__ocfs2_move_extent()', relax 'BUG()' to 'ocfs2_error()' justto avoid crashing the whole kernel due to a filesystem corruption.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs/ntfs3: Initialize allocated memory before useKMSAN reports: Multiple uninitialized values detected:- KMSAN: uninit-value in ntfs_read_hdr (3)- KMSAN: uninit-value in bcmp (3)Memory is allocated by __getname(), which is a wrapper forkmem_cache_alloc(). This memory is used before being properlycleared. Change kmem_cache_alloc() to kmem_cache_zalloc() toproperly allocate and clear memory before use.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nbd: defer config unlock in nbd_genl_connectThere is one use-after-free warning when running NBD_CMD_CONNECT andNBD_CLEAR_SOCK:nbd_genl_connect nbd_alloc_and_init_config // config_refs=1 nbd_start_device // config_refs=2 set NBD_RT_HAS_CONFIG_REF open nbd // config_refs=3 recv_work done // config_refs=2 NBD_CLEAR_SOCK // config_refs=1 close nbd // config_refs=0 refcount_inc -> uaf------------[ cut here ]------------refcount_t: addition on 0; use-after-free.WARNING: CPU: 24 PID: 1014 at lib/refcount.c:25 refcount_warn_saturate+0x12e/0x290 nbd_genl_connect+0x16d0/0x1ab0 genl_family_rcv_msg_doit+0x1f3/0x310 genl_rcv_msg+0x44a/0x790The issue can be easily reproduced by adding a small delay beforerefcount_inc(&nbd->config_refs) in nbd_genl_connect(): mutex_unlock(&nbd->config_lock); if (!ret) { set_bit(NBD_RT_HAS_CONFIG_REF, &config->runtime_flags);+ printk("before sleep\n");+ mdelay(5 * 1000);+ printk("after sleep\n"); refcount_inc(&nbd->config_refs); nbd_connect_reply(info, nbd->index); }
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:macintosh/mac_hid: fix race condition in mac_hid_toggle_emumouseThe following warning appears when running syzkaller, and this issue alsoexists in the mainline code. ------------[ cut here ]------------ list_add double add: new=ffffffffa57eee28, prev=ffffffffa57eee28, next=ffffffffa5e63100. WARNING: CPU: 0 PID: 1491 at lib/list_debug.c:35 __list_add_valid_or_report+0xf7/0x130 Modules linked in: CPU: 0 PID: 1491 Comm: syz.1.28 Not tainted 6.6.0+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__list_add_valid_or_report+0xf7/0x130 RSP: 0018:ff1100010dfb7b78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa57eee18 RCX: ffffffff97fc9817 RDX: 0000000000040000 RSI: ffa0000002383000 RDI: 0000000000000001 RBP: ffffffffa57eee28 R08: 0000000000000001 R09: ffe21c0021bf6f2c R10: 0000000000000001 R11: 6464615f7473696c R12: ffffffffa5e63100 R13: ffffffffa57eee28 R14: ffffffffa57eee28 R15: ff1100010dfb7d48 FS: 00007fb14398b640(0000) GS:ff11000119600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010d096005 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 80000000 Call Trace: input_register_handler+0xb3/0x210 mac_hid_start_emulation+0x1c5/0x290 mac_hid_toggle_emumouse+0x20a/0x240 proc_sys_call_handler+0x4c2/0x6e0 new_sync_write+0x1b1/0x2d0 vfs_write+0x709/0x950 ksys_write+0x12a/0x250 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x78/0xe2The WARNING occurs when two processes concurrently write to the mac-hidemulation sysctl, causing a race condition in mac_hid_toggle_emumouse().Both processes read old_val=0, then both try to register the input handler,leading to a double list_add of the same handler. CPU0 CPU1 ------------------------- ------------------------- vfs_write() //write 1 vfs_write() //write 1 proc_sys_write() proc_sys_write() mac_hid_toggle_emumouse() mac_hid_toggle_emumouse() old_val = *valp // old_val=0 old_val = *valp // old_val=0 mutex_lock_killable() proc_dointvec() // *valp=1 mac_hid_start_emulation() input_register_handler() mutex_unlock() mutex_lock_killable() proc_dointvec() mac_hid_start_emulation() input_register_handler() //Trigger Warning mutex_unlock()Fix this by moving the old_val read inside the mutex lock region.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: smartpqi: Fix device resources accessed after device removalCorrect possible race conditions during device removal.Previously, a scheduled work item to reset a LUN could still executeafter the device was removed, leading to use-after-free and otherresource access issues.This race condition occurs because the abort handler may schedule a LUNreset concurrently with device removal via sdev_destroy(), leading touse-after-free and improper access to freed resources. - Check in the device reset handler if the device is still present in the controller's SCSI device list before running; if not, the reset is skipped. - Cancel any pending TMF work that has not started in sdev_destroy(). - Ensure device freeing in sdev_destroy() is done while holding the LUN reset mutex to avoid races with ongoing resets.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nbd: defer config put in recv_workThere is one uaf issue in recv_work when running NBD_CLEAR_SOCK andNBD_CMD_RECONFIGURE: nbd_genl_connect // conf_ref=2 (connect and recv_work A) nbd_open // conf_ref=3 recv_work A done // conf_ref=2 NBD_CLEAR_SOCK // conf_ref=1 nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B) close nbd // conf_ref=1 recv_work B config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAFOr only running NBD_CLEAR_SOCK: nbd_genl_connect // conf_ref=2 nbd_open // conf_ref=3 NBD_CLEAR_SOCK // conf_ref=2 close nbd nbd_release config_put // conf_ref=1 recv_work config_put // conf_ref=0 atomic_dec(&config->recv_threads); -> UAFCommit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying thewaiter") moved nbd_config_put() to run before waking up the waiter inrecv_work, in order to ensure that nbd_start_device_ioctl() would notbe woken up while nbd->task_recv was still uncleared.However, in nbd_start_device_ioctl(), after being woken up it explicitlycalls flush_workqueue() to make sure all current works are finished.Therefore, there is no need to move the config put ahead of the wakeup.Move nbd_config_put() to the end of recv_work, so that the reference isheld for the whole lifetime of the worker thread. This makes sure theconfig cannot be freed while recv_work is still running, even if clear+ reconfigure interleave.In addition, we don't need to worry about recv_work dropping the lastnbd_put (which causes deadlock):path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=1 (trigger recv_work) open nbd // nbd_refs=2 NBD_CLEAR_SOCK close nbd nbd_release nbd_disconnect_and_put flush_workqueue // recv_work done nbd_config_put nbd_put // nbd_refs=1 nbd_put // nbd_refs=0 queue_workpath B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT): connect // nbd_refs=2 (trigger recv_work) open nbd // nbd_refs=3 NBD_CLEAR_SOCK // conf_refs=2 close nbd nbd_release nbd_config_put // conf_refs=1 nbd_put // nbd_refs=2 recv_work done // conf_refs=0, nbd_refs=1 rmmod // nbd_refs=0Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put")
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md: fix rcu protection in md_wakeup_threadWe attempted to use RCU to protect the pointer 'thread', but directlypassed the value when calling md_wakeup_thread(). This means that theRCU pointer has been acquired before rcu_read_lock(), which rendersrcu_read_lock() ineffective and could lead to a use-after-free.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix stackmap overflow check in __bpf_get_stackid()Syzkaller reported a KASAN slab-out-of-bounds write in __bpf_get_stackid()when copying stack trace data. The issue occurs when the perf trace contains more stack entries than the stack map bucket can hold, leading to an out-of-bounds write in the bucket's data array.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Fix null deref on srq->rq.queue after resize failureA NULL pointer dereference can occur in rxe_srq_chk_attr() whenibv_modify_srq() is invoked twice in succession under certain errorconditions. The first call may fail in rxe_queue_resize(), which leadsrxe_srq_from_attr() to set srq->rq.queue = NULL. The second call thentriggers a crash (null deref) when accessingsrq->rq.queue->buf->index_mask.Call Trace:rxe_modify_srq+0x170/0x480 [rdma_rxe]? __pfx_rxe_modify_srq+0x10/0x10 [rdma_rxe]? uverbs_try_lock_object+0x4f/0xa0 [ib_uverbs]? rdma_lookup_get_uobject+0x1f0/0x380 [ib_uverbs]ib_uverbs_modify_srq+0x204/0x290 [ib_uverbs]? __pfx_ib_uverbs_modify_srq+0x10/0x10 [ib_uverbs]? tryinc_node_nr_active+0xe6/0x150? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs]ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2c0/0x470 [ib_uverbs]? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]? uverbs_fill_udata+0xed/0x4f0 [ib_uverbs]ib_uverbs_run_method+0x55a/0x6e0 [ib_uverbs]? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]ib_uverbs_cmd_verbs+0x54d/0x800 [ib_uverbs]? __pfx_ib_uverbs_cmd_verbs+0x10/0x10 [ib_uverbs]? __pfx___raw_spin_lock_irqsave+0x10/0x10? __pfx_do_vfs_ioctl+0x10/0x10? ioctl_has_perm.constprop.0.isra.0+0x2c7/0x4c0? __pfx_ioctl_has_perm.constprop.0.isra.0+0x10/0x10ib_uverbs_ioctl+0x13e/0x220 [ib_uverbs]? __pfx_ib_uverbs_ioctl+0x10/0x10 [ib_uverbs]__x64_sys_ioctl+0x138/0x1c0do_syscall_64+0x82/0x250? fdget_pos+0x58/0x4c0? ksys_write+0xf3/0x1c0? __pfx_ksys_write+0x10/0x10? do_syscall_64+0xc8/0x250? __pfx_vm_mmap_pgoff+0x10/0x10? fget+0x173/0x230? fput+0x2a/0x80? ksys_mmap_pgoff+0x224/0x4c0? do_syscall_64+0xc8/0x250? do_user_addr_fault+0x37b/0xfe0? clear_bhb_loop+0x50/0xa0? clear_bhb_loop+0x50/0xa0? clear_bhb_loop+0x50/0xa0entry_SYSCALL_64_after_hwframe+0x76/0x7e
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Do not let BPF test infra emit invalid GSO types to stackYinhao et al. reported that their fuzzer tool was able to trigger askb_warn_bad_offload() from netif_skb_features() -> gso_features_check().When a BPF program - triggered via BPF test infra - pushes the packetto the loopback device via bpf_clone_redirect() then mentioned offloadwarning can be seen. GSO-related features are then rightfully disabled.We get into this situation due to convert___skb_to_skb() settinggso_segs and gso_size but not gso_type. Technically, it makes sensethat this warning triggers since the GSO properties are malformed dueto the gso_type. Potentially, the gso_type could be marked non-trustworthythrough setting it at least to SKB_GSO_DODGY without any other specificassumptions, but that also feels wrong given we should not go furtherinto the GSO engine in the first place.The checks were added in 121d57af308d ("gso: validate gso_type in GSOhandlers") because there were malicious (syzbot) senders that combinea protocol with a non-matching gso_type. If we would want to drop suchpackets, gso_features_check() currently only returns feature flags vianetif_skb_features(), so one location for potentially dropping such skbscould be validate_xmit_unreadable_skb(), but then otoh it would bean additional check in the fast-path for a very corner case. Givenbpf_clone_redirect() is the only place where BPF test infra could emitsuch packets, lets reject them right there.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ntfs3: Fix uninit buffer allocated by __getname()Fix uninit errors caused after buffer allocation given to 'de'; byinitializing the buffer with zeroes. The fix was found by using KMSAN.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ntfs3: fix uninit memory after failed mi_read in mi_format_newFix a KMSAN un-init bug found by syzkaller.ntfs_get_bh() expects a buffer from sb_getblk(), that buffer may not beuptodate. We do not bring the buffer uptodate before setting it asuptodate. If the buffer were to not be uptodate, it could mean adding abuffer with un-init data to the mi record. Attempting to load that recordwill trigger KMSAN.Avoid this by setting the buffer as uptodate, if it's not already, byoverwriting it.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/ivpu: Fix page fault in ivpu_bo_unbind_all_bos_from_context()Don't add BO to the vdev->bo_list in ivpu_gem_create_object().When failure happens inside drm_gem_shmem_create(), the BO is notfully created and ivpu_gem_bo_free() callback will not be calledcausing a deleted BO to be left on the list.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smack: fix bug: unprivileged task can create labelsIf an unprivileged task is allowed to relabel itself(/smack/relabel-self is not empty),it can freely create new labels by writing theirnames into own /proc/PID/attr/smack/currentThis occurs because do_setattr() importsthe provided label in advance,before checking "relabel-self" list.This change ensures that the "relabel-self" listis checked before importing the label.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: Verify inode mode when loading from disksyzbot is reporting that S_IFMT bits of inode->i_mode can become bogus whenthe S_IFMT bits of the 16bits "mode" field loaded from disk are corrupted.According to [1], the permissions field was treated as reserved in Mac OS8 and 9. According to [2], the reserved field was explicitly initializedwith 0, and that field must remain 0 as long as reserved. Therefore, whenthe "mode" field is not 0 (i.e. no longer reserved), the file must beS_IFDIR if dir == 1, and the file must be one of S_IFREG/S_IFLNK/S_IFCHR/S_IFBLK/S_IFIFO/S_IFSOCK if dir == 0.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: fix return value of f2fs_recover_fsync_data()With below scripts, it will trigger panic in f2fs:mkfs.f2fs -f /dev/vddmount /dev/vdd /mnt/f2fstouch /mnt/f2fs/foosyncecho 111 >> /mnt/f2fs/foof2fs_io fsync /mnt/f2fs/foof2fs_io shutdown 2 /mnt/f2fsumount /mnt/f2fsmount -o ro,norecovery /dev/vdd /mnt/f2fsormount -o ro,disable_roll_forward /dev/vdd /mnt/f2fsF2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361fF2FS-fs (vdd): Stopped filesystem due to reason: 0F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1Filesystem f2fs get_tree() didn't set fc->root, returned 1------------[ cut here ]------------kernel BUG at fs/super.c:1761!Oops: invalid opcode: 0000 [#1] SMP PTICPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014RIP: 0010:vfs_get_tree.cold+0x18/0x1aCall Trace: fc_mount+0x13/0xa0 path_mount+0x34e/0xc50 __x64_sys_mount+0x121/0x150 do_syscall_64+0x84/0x800 entry_SYSCALL_64_after_hwframe+0x76/0x7eRIP: 0033:0x7fa6cc126cfeThe root cause is we missed to handle error number returned fromf2fs_recover_fsync_data() when mounting image w/ ro,norecovery orro,disable_roll_forward mount option, result in returning a positiveerror number to vfs_get_tree(), fix it.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ocfs2: fix kernel BUG in ocfs2_find_victim_chainsyzbot reported a kernel BUG in ocfs2_find_victim_chain() because the`cl_next_free_rec` field of the allocation chain list (next free slot inthe chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec)condition in ocfs2_find_victim_chain() and panicking the kernel.To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(),just before calling ocfs2_find_victim_chain(), the code block in it beingexecuted when either of the following conditions is true:1. `cl_next_free_rec` is equal to 0, indicating that there are no freechains in the allocation chain list2. `cl_next_free_rec` is greater than `cl_count` (the total number ofchains in the allocation chain list)Either of them being true is indicative of the fact that there are nochains left for usage.This is addressed using ocfs2_error(), which printsthe error log for debugging purposes, rather than panicking the kernel.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sched/deadline: only set free_cpus for online runqueuesCommit 16b269436b72 ("sched/deadline: Modify cpudl::free_cpusto reflect rd->online") introduced the cpudl_set/clear_freecpufunctions to allow the cpu_dl::free_cpus mask to be manipulatedby the deadline scheduler class rq_on/offline callbacks so themask would also reflect this state.Commit 9659e1eeee28 ("sched/deadline: Remove cpu_active_maskfrom cpudl_find()") removed the check of the cpu_active_mask tosave some processing on the premise that the cpudl::free_cpusmask already reflected the runqueue online state.Unfortunately, there are cases where it is possible for thecpudl_clear function to set the free_cpus bit for a CPU when thedeadline runqueue is offline. When this occurs while a CPU isconnected to the default root domain the flag may retain the badstate after the CPU has been unplugged. Later, a different CPUthat is transitioning through the default root domain may push adeadline task to the powered down CPU when cpudl_find sees itsfree_cpus bit is set. If this happens the task will not have theopportunity to run.One example is outlined here:https://lore.kernel.org/lkml/20250110233010.2339521-1-opendmb@gmail.comAnother occurs when the last deadline task is migrated from aCPU that has an offlined runqueue. The dequeue_task member ofthe deadline scheduler class will eventually call cpudl_clearand set the free_cpus bit for the CPU.This commit modifies the cpudl_clear function to be aware of theonline state of the deadline runqueue so that the free_cpus maskcan be updated appropriately.It is no longer necessary to manage the mask outside of thecpudl_set/clear functions so the cpudl_set/clear_freecpufunctions are removed. In addition, since the free_cpus mask isnow only updated under the cpudl lock the code was changed touse the non-atomic __cpumask functions.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: target: Reset t_task_cdb pointer in error caseIf allocation of cmd->t_task_cdb fails, it remains NULL but is laterdereferenced in the 'err' path.In case of error, reset NULL t_task_cdb value to point at the defaultfixed-size buffer.Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netrom: Fix memory leak in nr_sendmsg()syzbot reported a memory leak [1].When function sock_alloc_send_skb() return NULL in nr_output(), theoriginal skb is not freed, which was allocated in nr_sendmsg(). Fix thisby freeing it before return.[1]BUG: memory leakunreferenced object 0xffff888129f35500 (size 240): comm "syz.0.17", pid 6119, jiffies 4294944652 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 10 52 28 81 88 ff ff ..........R(.... backtrace (crc 1456a3e4): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4983 [inline] slab_alloc_node mm/slub.c:5288 [inline] kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5340 __alloc_skb+0x203/0x240 net/core/skbuff.c:660 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0x69/0x3f0 net/core/skbuff.c:6671 sock_alloc_send_pskb+0x379/0x3e0 net/core/sock.c:2965 sock_alloc_send_skb include/net/sock.h:1859 [inline] nr_sendmsg+0x287/0x450 net/netrom/af_netrom.c:1105 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] sock_write_iter+0x293/0x2a0 net/socket.c:1195 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0x143/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: fix to avoid updating zero-sized extent in extent cacheAs syzbot reported:F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0]------------[ cut here ]------------kernel BUG at fs/f2fs/extent_cache.c:678!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTICPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678Call Trace: f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085 f2fs_do_zero_range fs/f2fs/file.c:1657 [inline] f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737 f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030 vfs_fallocate+0x669/0x7e0 fs/open.c:342 ioctl_preallocate fs/ioctl.c:289 [inline] file_ioctl+0x611/0x780 fs/ioctl.c:-1 do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576 __do_sys_ioctl fs/ioctl.c:595 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fRIP: 0033:0x7f07bc58eec9In error path of f2fs_zero_range(), it may add a zero-sized extentinto extent cache, it should be avoided.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:char: applicom: fix NULL pointer dereference in ac_ioctlDiscovered by Atuin - Automated Vulnerability Discovery Engine.In ac_ioctl, the validation of IndexCard and the check for a validRamIO pointer are skipped when cmd is 6. However, the functionunconditionally executes readb(apbs[IndexCard].RamIO + VERS) at theend.If cmd is 6, IndexCard may reference a board that does not exist(where RamIO is NULL), leading to a NULL pointer dereference.Fix this by skipping the readb access when cmd is 6, as thiscommand is a global information query and does not target a specificboard context.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ksmbd: vfs: fix race on m_flags in vfs_cacheksmbd maintains delete-on-close and pending-delete state inksmbd_inode->m_flags. In vfs_cache.c this field is accessed underinconsistent locking: some paths read and modify m_flags underci->m_lock while others do so without taking the lock at all.Examples: - ksmbd_query_inode_status() and __ksmbd_inode_close() use ci->m_lock when checking or updating m_flags. - ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(), ksmbd_clear_inode_pending_delete() and ksmbd_fd_set_delete_on_close() used to read and modify m_flags without ci->m_lock.This creates a potential data race on m_flags when multiple threadsopen, close and delete the same file concurrently. In the worst casedelete-on-close and pending-delete bits can be lost or observed in aninconsistent state, leading to confusing delete semantics (files thatstay on disk after delete-on-close, or files that disappear while stillin use).Fix it by: - Making ksmbd_query_inode_status() look at m_flags under ci->m_lock after dropping inode_hash_lock. - Adding ci->m_lock protection to all helpers that read or modify m_flags (ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(), ksmbd_clear_inode_pending_delete(), ksmbd_fd_set_delete_on_close()). - Keeping the existing ci->m_lock protection in __ksmbd_inode_close(), and moving the actual unlink/xattr removal outside the lock.This unifies the locking around m_flags and removes the data race whilepreserving the existing delete-on-close behaviour.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslotReject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that wasinitially created with a guest_memfd binding, as KVM doesn't supporttoggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enablingKVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag.Failure to reject the new memslot results in a use-after-free due to KVMnot unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLYchange is easy enough, and can/will be done as a hardening measure (inanticipation of KVM supporting dirty logging on guest_memfd at some point),but fixing the use-after-free would only address the immediate symptom. ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm] Write of size 8 at addr ffff8881111ae908 by task repro/745 CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5c0 kasan_report+0xb4/0xe0 kvm_gmem_release+0x362/0x400 [kvm] __fput+0x2fa/0x9d0 task_work_run+0x12c/0x200 do_exit+0x6ae/0x2100 do_group_exit+0xa8/0x230 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0x737/0x740 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f581f2eac31 Allocated by task 745 on cpu 6 at 9.746971s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_kmalloc+0x77/0x90 kvm_set_memory_region.part.0+0x652/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 745 on cpu 6 at 9.747467s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x3b/0x60 kfree+0xf5/0x440 kvm_set_memslot+0x3c2/0x1160 [kvm] kvm_set_memory_region.part.0+0x86a/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring: fix filename leak in __io_openat_prep() __io_openat_prep() allocates a struct filename using getname(). However,for the condition of the file being installed in the fixed file table aswell as having O_CLOEXEC flag set, the function returns early. At thatpoint, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this,the memory for the newly allocated struct filename is not cleaned up,causing a memory leak.Fix this by setting the REQ_F_NEED_CLEANUP for the request just after thesuccessful getname() call, so that when the request is torn down, thefilename will be cleaned up, along with other resources needing cleanup.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: ets: Remove drr class from the active list if it changes to strictWhenever a user issues an ets qdisc change command, transforming adrr class into a strict one, the ets code isn't checking whether thatclass was in the active list and removing it. This means that, if auser changes a strict class (which was in the active list) back to a drrone, that class will be added twice to the active list [1].Doing so with the following commands:tc qdisc add dev lo root handle 1: ets bands 2 strict 1tc qdisc add dev lo parent 1:2 handle 20: \ tbf rate 8bit burst 100b latency 1stc filter add dev lo parent 1: basic classid 1:2ping -c1 -W0.01 -s 56 127.0.0.1tc qdisc change dev lo root handle 1: ets bands 2 strict 2tc qdisc change dev lo root handle 1: ets bands 2 strict 1ping -c1 -W0.01 -s 56 127.0.0.1Will trigger the following splat with list debug turned on:[ 59.279014][ T365] ------------[ cut here ]------------[ 59.279452][ T365] list_add double add: new=ffff88801d60e350, prev=ffff88801d60e350, next=ffff88801d60e2c0.[ 59.280153][ T365] WARNING: CPU: 3 PID: 365 at lib/list_debug.c:35 __list_add_valid_or_report+0x17f/0x220[ 59.280860][ T365] Modules linked in:[ 59.281165][ T365] CPU: 3 UID: 0 PID: 365 Comm: tc Not tainted 6.18.0-rc7-00105-g7e9f13163c13-dirty #239 PREEMPT(voluntary)[ 59.281977][ T365] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011[ 59.282391][ T365] RIP: 0010:__list_add_valid_or_report+0x17f/0x220[ 59.282842][ T365] Code: 89 c6 e8 d4 b7 0d ff 90 0f 0b 90 90 31 c0 e9 31 ff ff ff 90 48 c7 c7 e0 a0 22 9f 48 89 f2 48 89 c1 4c 89 c6 e8 b2 b7 0d ff 90 <0f> 0b 90 90 31 c0 e9 0f ff ff ff 48 89 f7 48 89 44 24 10 4c 89 44...[ 59.288812][ T365] Call Trace:[ 59.289056][ T365] [ 59.289224][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.289546][ T365] ets_qdisc_change+0xd2b/0x1e80[ 59.289891][ T365] ? __lock_acquire+0x7e7/0x1be0[ 59.290223][ T365] ? __pfx_ets_qdisc_change+0x10/0x10[ 59.290546][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.290898][ T365] ? __mutex_trylock_common+0xda/0x240[ 59.291228][ T365] ? __pfx___mutex_trylock_common+0x10/0x10[ 59.291655][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.291993][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.292313][ T365] ? trace_contention_end+0xc8/0x110[ 59.292656][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.293022][ T365] ? srso_alias_return_thunk+0x5/0xfbef5[ 59.293351][ T365] tc_modify_qdisc+0x63a/0x1cf0Fix this by always checking and removing an ets class from the active listwhen changing it to strict.[1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/tree/net/sched/sch_ets.c?id=ce052b9402e461a9aded599f5b47e76bc727f7de#n663
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: fw_tracer, Validate format string parametersAdd validation for format string parameters in the firmware tracer toprevent potential security vulnerabilities and crashes from malformedformat strings received from firmware.The firmware tracer receives format strings from the device firmware anduses them to format trace messages. Without proper validation, badfirmware could provide format strings with invalid format specifiers(e.g., %s, %p, %n) that could lead to crashes, or other undefinedbehavior.Add mlx5_tracer_validate_params() to validate that all format specifiersin trace strings are limited to safe integer/hex formats (%x, %d, %i,%u, %llx, %lx, etc.). Reject strings containing other format types thatcould be used to access arbitrary memory or cause crashes.Invalid format strings are added to the trace output for visibility with"BAD_FORMAT: " prefix.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path"This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9.The commit being reverted added code to __qla2x00_abort_all_cmds() tocall sp->done() without holding a spinlock. But unlike the older codebelow it, this new code failed to check sp->cmd_type and just assumedTYPE_SRB, which results in a jump to an invalid pointer in target-modewith TYPE_TGT_CMD:qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79bqla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h.qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no bufferqla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurredqla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda.BUG: kernel NULL pointer dereference, address: 0000000000000000PF: supervisor instruction fetch in kernel modePF: error_code(0x0010) - not-present pagePGD 0 P4D 0Oops: 0010 [#1] SMPCPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023RIP: 0010:0x0Code: Unable to access opcode bytes at 0xffffffffffffffd6.RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400Call Trace: ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early withinlock") added the spinlock back, because not having the lock caused arace and a crash. But qla2x00_abort_srb() in the switch below alreadychecks for qla2x00_chip_is_down() and handles it the same way, so thecode above the switch is now redundant and still buggy in target-mode.Remove it.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Input: alps - fix use-after-free bugs caused by dev3_register_workThe dev3_register_work delayed work item is initialized withinalps_reconnect() and scheduled upon receipt of the first barePS/2 packet from an external PS/2 device connected to the ALPStouchpad. During device detachment, the original implementationcalls flush_workqueue() in psmouse_disconnect() to ensurecompletion of dev3_register_work. However, the flush_workqueue()in psmouse_disconnect() only blocks and waits for work items thatwere already queued to the workqueue prior to its invocation. Anywork items submitted after flush_workqueue() is called are notincluded in the set of tasks that the flush operation awaits.This means that after flush_workqueue() has finished executing,the dev3_register_work could still be scheduled. Although thepsmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(),the scheduling of dev3_register_work remains unaffected.The race condition can occur as follows:CPU 0 (cleanup path) | CPU 1 (delayed work)psmouse_disconnect() | psmouse_set_state() | flush_workqueue() | alps_report_bare_ps2_packet() alps_disconnect() | psmouse_queue_work() kfree(priv); // FREE | alps_register_bare_ps2_mouse() | priv = container_of(work...); // USE | priv->dev3 // USEAdd disable_delayed_work_sync() in alps_disconnect() to ensurethat dev3_register_work is properly canceled and prevented fromexecuting after the alps_data structure has been deallocated.This bug is identified by static analysis.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ublk: fix deadlock when reading partition tableWhen one process(such as udev) opens ublk block device (e.g., to readthe partition table via bdev_open()), a deadlock[1] can occur:1. bdev_open() grabs disk->open_mutex2. The process issues read I/O to ublk backend to read partition table3. In __ublk_complete_rq(), blk_update_request() or blk_mq_end_request() runs bio->bi_end_io() callbacks4. If this triggers fput() on file descriptor of ublk block device, the work may be deferred to current task's task work (see fput() implementation)5. This eventually calls blkdev_release() from the same context6. blkdev_release() tries to grab disk->open_mutex again7. Deadlock: same task waiting for a mutex it already holdsThe fix is to run blk_update_request() and blk_mq_end_request() with bottomhalves disabled. This forces blkdev_release() to run in kernel work-queuecontext instead of current task work context, and allows ublk server to makeforward progress, and avoids the deadlock.[axboe: rewrite comment in ublk]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: hns3: using the num_tqps in the vf driver to apply for resourcesCurrently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqpis allocated using kinfo->num_tqps. However, kinfo->num_tqps is set tomin(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smallerthan hdev->num_tqps, which causes some hdev->htqp[i] to remainuninitialized in hclgevf_knic_setup().Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,ensuring that the lengths of hdev->htqp and kinfo->tqp are consistentand that all elements are properly initialized.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: ets: Always remove class from active list before deleting in ets_qdisc_changezdi-disclosures@trendmicro.com says:The vulnerability is a race condition between `ets_qdisc_dequeue` and`ets_qdisc_change`. It leads to UAF on `struct Qdisc` object.Attacker requires the capability to create new user and network namespacein order to trigger the bug.See my additional commentary at the end of the analysis.Analysis:static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt, struct netlink_ext_ack *extack){... // (1) this lock is preventing .change handler (`ets_qdisc_change`) //to race with .dequeue handler (`ets_qdisc_dequeue`) sch_tree_lock(sch); for (i = nbands; i < oldbands; i++) { if (i >= q->nstrict && q->classes[i].qdisc->q.qlen) list_del_init(&q->classes[i].alist); qdisc_purge_queue(q->classes[i].qdisc); } WRITE_ONCE(q->nbands, nbands); for (i = nstrict; i < q->nstrict; i++) { if (q->classes[i].qdisc->q.qlen) { // (2) the class is added to the q->active list_add_tail(&q->classes[i].alist, &q->active); q->classes[i].deficit = quanta[i]; } } WRITE_ONCE(q->nstrict, nstrict); memcpy(q->prio2band, priomap, sizeof(priomap)); for (i = 0; i < q->nbands; i++) WRITE_ONCE(q->classes[i].quantum, quanta[i]); for (i = oldbands; i < q->nbands; i++) { q->classes[i].qdisc = queues[i]; if (q->classes[i].qdisc != &noop_qdisc) qdisc_hash_add(q->classes[i].qdisc, true); } // (3) the qdisc is unlocked, now dequeue can be called in parallel // to the rest of .change handler sch_tree_unlock(sch); ets_offload_change(sch); for (i = q->nbands; i < oldbands; i++) { // (4) we're reducing the refcount for our class's qdisc and // freeing it qdisc_put(q->classes[i].qdisc); // (5) If we call .dequeue between (4) and (5), we will have // a strong UAF and we can control RIP q->classes[i].qdisc = NULL; WRITE_ONCE(q->classes[i].quantum, 0); q->classes[i].deficit = 0; gnet_stats_basic_sync_init(&q->classes[i].bstats); memset(&q->classes[i].qstats, 0, sizeof(q->classes[i].qstats)); } return 0;}Comment:This happens because some of the classes have their qdiscs assigned toNULL, but remain in the active list. This commit fixes this issue by alwaysremoving the class from the active list before deleting and freeing itsassociated qdiscReproducer Steps(trimmed version of what was sent by zdi-disclosures@trendmicro.com)```DEV="${DEV:-lo}"ROOT_HANDLE="${ROOT_HANDLE:-1:}"BAND2_HANDLE="${BAND2_HANDLE:-20:}" # child under 1:2PING_BYTES="${PING_BYTES:-48}"PING_COUNT="${PING_COUNT:-200000}"PING_DST="${PING_DST:-127.0.0.1}"SLOW_TBF_RATE="${SLOW_TBF_RATE:-8bit}"SLOW_TBF_BURST="${SLOW_TBF_BURST:-100b}"SLOW_TBF_LAT="${SLOW_TBF_LAT:-1s}"cleanup() { tc qdisc del dev "$DEV" root 2>/dev/null}trap cleanup EXITip link set "$DEV" uptc qdisc del dev "$DEV" root 2>/dev/null || truetc qdisc add dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2tc qdisc add dev "$DEV" parent 1:2 handle "$BAND2_HANDLE" \ tbf rate "$SLOW_TBF_RATE" burst "$SLOW_TBF_BURST" latency "$SLOW_TBF_LAT"tc filter add dev "$DEV" parent 1: protocol all prio 1 u32 match u32 0 0 flowid 1:2tc -s qdisc ls dev $DEVping -I "$DEV" -f -c "$PING_COUNT" -s "$PING_BYTES" -W 0.001 "$PING_DST" \ >/dev/null 2>&1 &tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 0tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2tc -s qdisc ls dev $DEVtc qdisc del dev "$DEV" parent ---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ntfs: set dummy blocksize to read boot_block when mountingWhen mounting, sb->s_blocksize is used to read the boot_block withoutbeing defined or validated. Set a dummy blocksize before attempting toread the boot_block.The issue can be triggered with the following syz reproducer: mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0) r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0) ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000) mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00', &(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0) syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0)Here, the ioctl sets the bdev block size to 16384. During mount,get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)),but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leavessb->s_blocksize at zero.Later, ntfs_init_from_boot() attempts to read the boot_block whilesb->s_blocksize is still zero, which triggers the bug.[almaz.alexandrovich@paragon-software.com: changed comment style, addedreturn value handling]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:svcrdma: bound check rq_pages index in inline pathsvc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] withoutverifying rc_curpage stays within the allocated page array. Add guardsbefore the first use and after advancing to a new page.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: invalidate dentry cache on failed whiteout creationF2FS can mount filesystems with corrupted directory depth values thatget runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUToperations are performed on such directories, f2fs_rename performsdirectory modifications (updating target entry and deleting sourceentry) before attempting to add the whiteout entry via f2fs_add_link.If f2fs_add_link fails due to the corrupted directory structure, thefunction returns an error to VFS, but the partial directorymodifications have already been committed to disk. VFS assumes theentire rename operation failed and does not update the dentry cache,leaving stale mappings.In the error path, VFS does not call d_move() to update the dentrycache. This results in new_dentry still pointing to the old inode(new_inode) which has already had its i_nlink decremented to zero.The stale cache causes subsequent operations to incorrectly referencethe freed inode.This causes subsequent operations to use cached dentry information thatno longer matches the on-disk state. When a second rename targets thesame entry, VFS attempts to decrement i_nlink on the stale inode, whichmay already have i_nlink=0, triggering a WARNING in drop_nlink().Example sequence:1. First rename (RENAME_WHITEOUT): file2 -> file1 - f2fs updates file1 entry on disk (points to inode 8) - f2fs deletes file2 entry on disk - f2fs_add_link(whiteout) fails (corrupted directory) - Returns error to VFS - VFS does not call d_move() due to error - VFS cache still has: file1 -> inode 7 (stale!) - inode 7 has i_nlink=0 (already decremented)2. Second rename: file3 -> file1 - VFS uses stale cache: file1 -> inode 7 - Tries to drop_nlink on inode 7 (i_nlink already 0) - WARNING in drop_nlink()Fix this by explicitly invalidating old_dentry and new_dentry whenf2fs_add_link fails during whiteout creation. This forces VFS torefresh from disk on subsequent operations, ensuring cache consistencyeven when the rename partially succeeds.Reproducer:1. Mount F2FS image with corrupted i_current_depth2. renameat2(file2, file1, RENAME_WHITEOUT)3. renameat2(file3, file1, 0)4. System triggers WARNING in drop_nlink()
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:functionfs: fix the open/removal racesffs_epfile_open() can race with removal, ending up with file->private_datapointing to freed object.There is a total count of opened files on functionfs (both ep0 anddynamic ones) and when it hits zero, dynamic files get removed.Unfortunately, that removal can happen while another thread isin ffs_epfile_open(), but has not incremented the count yet.In that case open will succeed, leaving us with UAF on any subsequentread() or write().The root cause is that ffs->opened is misused; atomic_dec_and_test() vs.atomic_add_return() is not a good idea, when object remains visible allalong.To untangle that * serialize openers on ffs->mutex (both for ep0 and for dynamic files) * have dynamic ones use atomic_inc_not_zero() and fail if we hadzero ->opened; in that case the file we are opening is doomed. * have the inodes of dynamic files marked on removal (from thecallback of simple_recursive_removal()) - clear ->i_private there. * have open of dynamic ones verify they hadn't been already removed,along with checking that state is FFS_ACTIVE.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: aic94xx: fix use-after-free in device removal pathThe asd_pci_remove() function fails to synchronize with pending taskletsbefore freeing the asd_ha structure, leading to a potentialuse-after-free vulnerability.When a device removal is triggered (via hot-unplug or module unload),race condition can occur.The fix adds tasklet_kill() before freeing the asd_ha structure,ensuring all scheduled tasklets complete before cleanup proceeds.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tpm: Cap the number of PCR bankstpm2_get_pcr_allocation() does not cap any upper limit for the number ofbanks. Cap the limit to eight banks so that out of bounds values comingfrom external I/O cause on only limited harm.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: stmmac: fix the crash issue for zero copy XDP_TX actionThere is a crash issue when running zero copy XDP_TX action, the crashlog is shown below.[ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000[ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP[ 216.301694] Call trace:[ 216.304130] dcache_clean_poc+0x20/0x38 (P)[ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0[ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400[ 216.317701] __stmmac_xdp_run_prog+0x164/0x368[ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00[ 216.326576] __napi_poll+0x40/0x218[ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interruptFor XDP_TX action, the xdp_buff is converted to xdp_frame byxdp_convert_buff_to_frame(). The memory type of the resulting xdp_framedepends on the memory type of the xdp_buff. For page pool based xdp_buffit produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copyXSK pool based xdp_buff it produces xdp_frame with memory typeMEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check thememory type and always uses the page pool type, this leads to invalidmappings and causes the crash. Therefore, check the xdp_buff memory typein stmmac_xdp_xmit_back() to fix this issue.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ip6_gre: make ip6gre_header() robustOver the years, syzbot found many ways to crash the kernelin ip6gre_header() [1].This involves team or bonding drivers ability to dynamicallychange their dev->needed_headroom and/or dev->hard_header_lenIn this particular crash mld_newpack() allocated an skbwith a too small reserve/headroom, and by the time mld_sendpack()was called, syzbot managed to attach an ip6gre device.[1]skbuff: skb_under_panic: text:ffffffff8a1d69a8 len:136 put:40 head:ffff888059bc7000 data:ffff888059bc6fe8 tail:0x70 end:0x6c0 dev:team0------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:213 ! skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ip6gre_header+0xc8/0x790 net/ipv6/ip6_gre.c:1371 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 neigh_output include/net/neighbour.h:556 [inline] ip6_finish_output2+0xfb3/0x1480 net/ipv6/ip6_output.c:136 __ip6_finish_output net/ipv6/ip6_output.c:-1 [inline] ip6_finish_output+0x234/0x7d0 net/ipv6/ip6_output.c:220 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: use global inline_xattr_slab instead of per-sb slab cacheAs Hong Yun reported in mailing list:loop7: detected capacity change from 0 to 131072------------[ cut here ]------------kmem_cache of name 'f2fs_xattr_entry-7:7' already existsWARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline]WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline]RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307Call Trace: __kmem_cache_create include/linux/slab.h:353 [inline] f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline] f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843 f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918 get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692 vfs_get_tree+0x43/0x140 fs/super.c:1815 do_new_mount+0x201/0x550 fs/namespace.c:3808 do_mount fs/namespace.c:4136 [inline] __do_sys_mount fs/namespace.c:4347 [inline] __se_sys_mount+0x298/0x2f0 fs/namespace.c:4324 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7eThe bug can be reproduced w/ below scripts:- mount /dev/vdb /mnt1- mount /dev/vdc /mnt2- umount /mnt1- mounnt /dev/vdb /mnt1The reason is if we created two slab caches, named f2fs_xattr_entry-7:3and f2fs_xattr_entry-7:7, and they have the same slab size. Actually,slab system will only create one slab cache core structure which hasslab name of "f2fs_xattr_entry-7:3", and two slab caches share the samestructure and cache address.So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it willdecrease reference count of slab cache, rather than release slab cacheentirely, since there is one more user has referenced the cache.Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again,slab system will find that there is existed cache which has the same nameand trigger the warning.Let's changes to use global inline_xattr_slab instead of per-sb slab cachefor fixing.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: typec: ucsi: Handle incorrect num_connectors capabilityThe UCSI spec states that the num_connectors field is 7 bits, and the8th bit is reserved and should be set to zero.Some buggy FW has been known to set this bit, and it can lead to asystem not booting.Flag that the FW is not behaving correctly, and auto-fix the valueso that the system boots correctly.Found on Lenovo P1 G8 during Linux enablement program. The FW willbe fixed, but seemed worth addressing in case it hit platforms thataren't officially Linux supported.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ACPICA: Avoid walking the Namespace if start_node is NULLAlthough commit 0c9992315e73 ("ACPICA: Avoid walking the ACPI Namespaceif it is not there") fixed the situation when both start_node andacpi_gbl_root_node are NULL, the Linux kernel mainline now still crashedon Honor Magicbook 14 Pro [1].That happens due to the access to the member of parent_node inacpi_ns_get_next_node(). The NULL pointer dereference will alwayshappen, no matter whether or not the start_node is equal toACPI_ROOT_OBJECT, so move the check of start_node being NULLout of the if block.Unfortunately, all the attempts to contact Honor have failed, theyrefused to provide any technical support for Linux.The bad DSDT table's dump could be found on GitHub [2].DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025[ rjw: Subject adjustment, changelog edits ]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:parisc: Do not reprogram affinitiy on ASP chipThe ASP chip is a very old variant of the GSP chip and is used e.g. inHP 730 workstations. When trying to reprogram the affinity it will crashwith a HPMC as the relevant registers don't seem to be at the usuallocation. Let's avoid the crash by checking the sversion. Also note,that reprogramming isn't necessary either, as the HP730 is a just asingle-CPU machine.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mptcp: avoid deadlock on fallback while reinjectingJakub reported an MPTCP deadlock at fallback time: WARNING: possible recursive locking detected 6.18.0-rc7-virtme #1 Not tainted -------------------------------------------- mptcp_connect/20858 is trying to acquire lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_try_fallback+0xd8/0x280 but task is already holding lock: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&msk->fallback_lock); lock(&msk->fallback_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mptcp_connect/20858: #0: ff1100001da18290 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x114/0x1bc0 #1: ff1100001db40fd0 (k-sk_lock-AF_INET#2){+.+.}-{0:0}, at: __mptcp_retrans+0x2cb/0xaa0 #2: ff1100001da18b60 (&msk->fallback_lock){+.-.}-{3:3}, at: __mptcp_retrans+0x352/0xaa0 stack backtrace: CPU: 0 UID: 0 PID: 20858 Comm: mptcp_connect Not tainted 6.18.0-rc7-virtme #1 PREEMPT(full) Hardware name: Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack_lvl+0x6f/0xa0 print_deadlock_bug.cold+0xc0/0xcd validate_chain+0x2ff/0x5f0 __lock_acquire+0x34c/0x740 lock_acquire.part.0+0xbc/0x260 _raw_spin_lock_bh+0x38/0x50 __mptcp_try_fallback+0xd8/0x280 mptcp_sendmsg_frag+0x16c2/0x3050 __mptcp_retrans+0x421/0xaa0 mptcp_release_cb+0x5aa/0xa70 release_sock+0xab/0x1d0 mptcp_sendmsg+0xd5b/0x1bc0 sock_write_iter+0x281/0x4d0 new_sync_write+0x3c5/0x6f0 vfs_write+0x65e/0xbb0 ksys_write+0x17e/0x200 do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fa5627cbc5e Code: 4d 89 d8 e8 14 bd 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff1fe14700 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa5627cbc5e RDX: 0000000000001f9c RSI: 00007fff1fe16984 RDI: 0000000000000005 RBP: 00007fff1fe14710 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff1fe16920 R13: 0000000000002000 R14: 0000000000001f9c R15: 0000000000001f9cThe packet scheduler could attempt a reinjection after receiving anMP_FAIL and before the infinite map has been transmitted, causing adeadlock since MPTCP needs to do the reinjection atomically from WRTfallback.Address the issue explicitly avoiding the reinjection in the criticalscenario. Note that this is the only fallback critical section thatcould potentially send packets and hit the double-lock.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: Discard Beacon frames to non-broadcast addressBeacon frames are required to be sent to the broadcast address, see IEEEStd 802.11-2020, 11.1.3.1 ("The Address 1 field of the Beacon .. frameshall be set to the broadcast address"). A unicast Beacon frame might beused as a targeted attack to get one of the associated STAs to dosomething (e.g., using CSA to move it to another channel). As such, itis better have strict filtering for this on the received side anddiscard all Beacon frames that are sent to an unexpected address.This is even more important for cases where beacon protection is used.The current implementation in mac80211 is correctly discarding unicastBeacon frames if the Protected Frame bit in the Frame Control field isset to 0. However, if that bit is set to 1, the logic used for checkingfor configured BIGTK(s) does not actually work. If the driver does nothave logic for dropping unicast Beacon frames with Protected Frame bit1, these frames would be accepted in mac80211 processing as valid Beaconframes even though they are not protected. This would allow beaconprotection to be bypassed. While the logic for checking beaconprotection could be extended to cover this corner case, a more genericcheck for discard all Beacon frames based on A1=unicast address coversthis without needing additional changes.Address all these issues by dropping received Beacon frames if they aresent to a non-broadcast address.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:LoongArch: BPF: Sign extend kfunc call argumentsThe kfunc calls are native calls so they should follow LoongArch callingconventions. Sign extend its arguments properly to avoid kernel panic.This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()helper performs extension in place meaning a value already store in thetarget register (Note: this is different from the existing sign_extend()helper and thus we can't reuse it).
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/irdma: avoid invalid read in irdma_net_eventirdma_net_event() should not dereference anything from "neigh" (alias"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.Other events come with different structures pointed to by "ptr" and theymay be smaller than struct neighbour.Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.The bug is mostly harmless, but it triggers KASAN on debug kernels: BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma] Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554 CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1 Hardware name: [...] Workqueue: events rt6_probe_deferred Call Trace: dump_stack_lvl+0x60/0xb0 print_address_description.constprop.0+0x2c/0x3f0 print_report+0xb4/0x270 kasan_report+0x92/0xc0 irdma_net_event+0x32e/0x3b0 [irdma] notifier_call_chain+0x9e/0x180 atomic_notifier_call_chain+0x5c/0x110 rt6_do_redirect+0xb91/0x1080 tcp_v6_err+0xe9b/0x13e0 icmpv6_notify+0x2b2/0x630 ndisc_redirect_rcv+0x328/0x530 icmpv6_rcv+0xc16/0x1360 ip6_protocol_deliver_rcu+0xb84/0x12e0 ip6_input_finish+0x117/0x240 ip6_input+0xc4/0x370 ipv6_rcv+0x420/0x7d0 __netif_receive_skb_one_core+0x118/0x1b0 process_backlog+0xd1/0x5d0 __napi_poll.constprop.0+0xa3/0x440 net_rx_action+0x78a/0xba0 handle_softirqs+0x2d4/0x9c0 do_softirq+0xad/0xe0
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt()The variable mddev->private is first assigned to conf and then checked: conf = mddev->private; if (!conf) ...If conf is NULL, then mddev->private is also NULL. In this case,null-pointer dereferences can occur when calling raid5_quiesce(): raid5_quiesce(mddev, true); raid5_quiesce(mddev, false);since mddev->private is assigned to conf again in raid5_quiesce(), and confis dereferenced in several places, for example: conf->quiesce = 0; wake_up(&conf->wait_for_quiescent);To fix this issue, the function should unlock mddev and return beforeinvoking raid5_quiesce() when conf is NULL, following the existing patternin raid5_change_consistency_policy().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"This patch ensures that the RX ring size (rx_pending) is notset below the permitted length. This avoids UBSANshift-out-of-bounds errors when users passes small or zeroring sizes via ethtool -G.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm/dpu: Add missing NULL pointer check for pingpong interfaceIt is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in asingle place the check is missing.Also use convenient locals instead of phys_enc->* where available.Patchwork: https://patchwork.freedesktop.org/patch/693860/
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cpuset: fix warning when disabling remote partitionA warning was triggered as follows:WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110RIP: 0010:remote_partition_disable+0xf7/0x110RSP: 0018:ffffc90001947d88 EFLAGS: 00000206RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0Call Trace: update_prstate+0x2d3/0x580 cpuset_partition_write+0x94/0xf0 kernfs_fop_write_iter+0x147/0x200 vfs_write+0x35d/0x500 ksys_write+0x66/0xe0 do_syscall_64+0x6b/0x390 entry_SYSCALL_64_after_hwframe+0x4b/0x53RIP: 0033:0x7f55c8cd4887Reproduction steps (on a 16-CPU machine): # cd /sys/fs/cgroup/ # mkdir A1 # echo +cpuset > A1/cgroup.subtree_control # echo "0-14" > A1/cpuset.cpus.exclusive # mkdir A1/A2 # echo "0-14" > A1/A2/cpuset.cpus.exclusive # echo "root" > A1/A2/cpuset.cpus.partition # echo 0 > /sys/devices/system/cpu/cpu15/online # echo member > A1/A2/cpuset.cpus.partitionWhen CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUsremain available for the top_cpuset, forcing partitions to share CPUs withthe top_cpuset. In this scenario, disabling the remote partition triggersa warning stating that effective_xcpus is not a subset ofsubpartitions_cpus. Partitions should be invalidated in this case toinform users that the partition is now invalid(cpus are shared withtop_cpuset).To fix this issue:1. Only emit the warning only if subpartitions_cpus is not empty and the effective_xcpus is not a subset of subpartitions_cpus.2. During the CPU hotplug process, invalidate partitions if subpartitions_cpus is empty.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: samsung: exynos-clkout: Assign .num before accessing .hwsCommit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)about the number of elements in .hws[], so that it can warn when .hws[]is accessed out of bounds. As noted in that change, the __counted_bymember must be initialized with the number of elements before the firstarray access happens, otherwise there will be a warning from each accessprior to the initialization because the number of elements is zero. Thisoccurs in exynos_clkout_probe() due to .num being assigned after .hws[]has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18 index 0 is out of range for type 'clk_hw *[*]'Move the .num initialization to before the first access of .hws[],clearing up the warning.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A flaw was found in libxml2, an XML parsing library. This uncontrolled recursion vulnerability occurs in the xmlCatalogXMLResolveURI function when an XML catalog contains a delegate URI entry that references itself. A remote attacker could exploit this configuration-dependent issue by providing a specially crafted XML catalog, leading to infinite recursion and call stack exhaustion. This ultimately results in a segmentation fault, causing a Denial of Service (DoS) by crashing affected applications.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libxml2-2 > 0-0 (version in image is 2.12.10-150700.4.6.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset`qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the classitself is active.Two qfq_class objects may point to the same leaf_qdisc. This happenswhen:1. one QFQ qdisc is attached to the dev as the root qdisc, and2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get()/ qdisc_put()) and is pending to be destroyed, as in functiontc_new_tfilter.When packets are enqueued through the root QFQ qdisc, the sharedleaf_qdisc->q.qlen increases. At the same time, the second QFQqdisc triggers qdisc_put and qdisc_destroy: the qdisc entersqfq_reset() with its own q->q.qlen == 0, but its class's leafqdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivatean inactive aggregate and trigger a null-deref in qfq_deactivate_agg:[ 0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000[ 0.903571] #PF: supervisor write access in kernel mode[ 0.903860] #PF: error_code(0x0002) - not-present page[ 0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0[ 0.904502] Oops: Oops: 0002 [#1] SMP NOPTI[ 0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE[ 0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014[ 0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2))[ 0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0Code starting with the faulting instruction=========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ...[ 0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246[ 0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000[ 0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000[ 0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000[ 0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000[ 0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880[ 0.909179] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000[ 0.909572] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0[ 0.910247] PKRU: 55555554[ 0.910391] Call Trace:[ 0.910527] [ 0.910638] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485)[ 0.910826] qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036)[ 0.911040] __qdisc_destroy (net/sched/sch_generic.c:1076)[ 0.911236] tc_new_tfilter (net/sched/cls_api.c:2447)[ 0.911447] rtnetlink_rcv_msg (net/core/rtnetlink.c:6958)[ 0.911663] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861)[ 0.911894] netlink_rcv_skb (net/netlink/af_netlink.c:2550)[ 0.912100] netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)[ 0.912296] ? __alloc_skb (net/core/skbuff.c:706)[ 0.912484] netlink_sendmsg (net/netlink/af---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: An integer overflow exists in the FTS5 https://sqlite.org/fts5.html extension. It occurs when the size of an array of tombstone pointers is calculated and truncated into a 32-bit integer. A pointer to partially controlled data can then be written out of bounds.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libsqlite3-0 > 0-0 (version in image is 3.50.2-150000.3.33.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: ena: fix shift-out-of-bounds in exponential backoffThe ENA adapters on our instances occasionally reset. Once recentlylogged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 Apparently, the reset delays are getting so large they can trigger aUBSAN panic.Looking at the code, the current timeout is capped at 5000us. Using abase value of 100us, the current code will overflow after (1<<29). Evenat values before 32, this function wraps around, perhapsunintentionally.Cap the value of the exponent used for this backoff at (1<<16) which islarger than currently necessary, but large enough to support biggervalues in the future.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:gfs2: Fix possible data races in gfs2_show_options()Some fields such as gt_logd_secs of the struct gfs2_tune are accessedwithout holding the lock gt_spin in gfs2_show_options(): val = sdp->sd_tune.gt_logd_secs; if (val != 30) seq_printf(s, ",commit=%d", val);And thus can cause data races when gfs2_show_options() and other functionssuch as gfs2_reconfigure() are concurrently executed: spin_lock(>->gt_spin); gt->gt_logd_secs = newargs->ar_commit;To fix these possible data races, the lock sdp->sd_tune.gt_spin isacquired before accessing the fields of gfs2_tune and released after theseaccesses.Further changes by Andreas:- Don't hold the spin lock over the seq_printf operations.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:HID: amd_sfh: Fix for shift-out-of-boundsShift operation of 'exp' and 'shift' variables exceeds the maximum numberof shift values in the u32 range leading to UBSAN shift-out-of-bounds....[ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50[ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int'[ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10[ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023[ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh][ 6.120687] Call Trace:[ 6.120690] [ 6.120694] dump_stack_lvl+0x48/0x70[ 6.120704] dump_stack+0x10/0x20[ 6.120707] ubsan_epilogue+0x9/0x40[ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170[ 6.120720] ? psi_group_change+0x25f/0x4b0[ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh][ 6.120739] get_input_rep+0x57/0x340 [amd_sfh][ 6.120748] ? __schedule+0xba7/0x1b60[ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh][ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh][ 6.120772] process_one_work+0x229/0x430[ 6.120780] worker_thread+0x4a/0x3c0[ 6.120784] ? __pfx_worker_thread+0x10/0x10[ 6.120788] kthread+0xf7/0x130[ 6.120792] ? __pfx_kthread+0x10/0x10[ 6.120795] ret_from_fork+0x29/0x50[ 6.120804] ...Fix this by adding the condition to validate shift ranges.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFS: Fix a potential data corruptionWe must ensure that the subrequests are joined back into the head beforewe can retransmit a request. If the head was not on the commit lists,because the server wrote it synchronously, we still need to add it backto the retransmission list.Add a call that mirrors the effect of nfs_cancel_remove_inode() forO_DIRECT.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ring-buffer: Do not swap cpu_buffer during resize processWhen ring_buffer_swap_cpu was called during resize process,the cpu buffer was swapped in the middle, resulting in incorrect state.Continuing to run in the wrong state will result in oops.This issue can be easily reproduced using the following two scripts:/tmp # cat test1.sh//#! /bin/shfor i in `seq 0 100000`do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5done/tmp # cat test2.sh//#! /bin/shfor i in `seq 0 100000`do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1done/tmp # ./test1.sh &/tmp # ./test2.sh &A typical oops log is as follows, sometimes with other different oops logs.[ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8[ 231.713375] Modules linked in:[ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15[ 231.716750] Hardware name: linux,dummy-virt (DT)[ 231.718152] Workqueue: events update_pages_handler[ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 231.721171] pc : rb_update_pages+0x378/0x3f8[ 231.722212] lr : rb_update_pages+0x25c/0x3f8[ 231.723248] sp : ffff800082b9bd50[ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000[ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0[ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a[ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000[ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510[ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002[ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558[ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001[ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000[ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208[ 231.744196] Call trace:[ 231.744892] rb_update_pages+0x378/0x3f8[ 231.745893] update_pages_handler+0x1c/0x38[ 231.746893] process_one_work+0x1f0/0x468[ 231.747852] worker_thread+0x54/0x410[ 231.748737] kthread+0x124/0x138[ 231.749549] ret_from_fork+0x10/0x20[ 231.750434] ---[ end trace 0000000000000000 ]---[ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000[ 233.721696] Mem abort info:[ 233.721935] ESR = 0x0000000096000004[ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits[ 233.722596] SET = 0, FnV = 0[ 233.722805] EA = 0, S1PTW = 0[ 233.723026] FSC = 0x04: level 0 translation fault[ 233.723458] Data abort info:[ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000[ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0[ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0[ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000[ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000[ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP[ 233.726720] Modules linked in:[ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15[ 233.727777] Hardware name: linux,dummy-virt (DT)[ 233.728225] Workqueue: events update_pages_handler[ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)[ 233.729054] pc : rb_update_pages+0x1a8/0x3f8[ 233.729334] lr : rb_update_pages+0x154/0x3f8[ 233.729592] sp : ffff800082b9bd50[ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 00000000---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:posix-timers: Ensure timer ID search-loop limit is validposix_timer_add() tries to allocate a posix timer ID by starting from thecached ID which was stored by the last successful allocation.This is done in a loop searching the ID space for a free slot one byone. The loop has to terminate when the search wrapped around to thestarting point.But that's racy vs. establishing the starting point. That is read outlockless, which leads to the following problem:CPU0 CPU1posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add() if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0;So CPU1 can observe a negative start value, i.e. -1, and the loop breaknever happens because the condition can never be true: if (sig->posix_timer_id == start) break;While this is unlikely to ever turn into an endless loop as the ID space ishuge (INT_MAX), the racy read of the start value caught the attention ofKCSAN and Dmitry unearthed that incorrectness.Rewrite it so that all id operations are under the hash lock.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:serial: sc16is7xx: setup GPIO controller later in probeThe GPIO controller component of the sc16is7xx driver is setup tooearly, which can result in a race condition where another device triesto utilise the GPIO lines before the sc16is7xx device has finishedinitialising.This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1cThis patch moves the setup of the GPIO controller functions to later in theprobe function, ensuring the sc16is7xx device has already finishedinitialising by the time other devices try to make use of the GPIO lines.The error handling has also been reordered to reflect the newinitialisation order.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability has been found in GNU Binutils 2.45. The affected element is the function elf_swap_shdr in the library bfd/elfcode.h of the component Linker. The manipulation leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is 9ca499644a21ceb3f946d1c179c38a83be084490. To fix this issue, it is recommended to deploy a patch. The code maintainer replied with "[f]ixed for 2.46".
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: When an OAuth2 bearer token is used for an HTTP(S) transfer, and that transferperforms a cross-protocol redirect to a second URL that uses an IMAP, LDAP,POP3 or SMTP scheme, curl might wrongly pass on the bearer token to the newtarget host.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- curl < 8.14.1-150700.7.8.1 (version in image is 8.14.1-150700.7.2.1).
-
Description: When doing TLS related transfers with reused easy or multi handles andaltering the `CURLSSLOPT_NO_PARTIALCHAIN` option, libcurl could accidentallyreuse a CA store cached in memory for which the partial chain option wasreversed. Contrary to the user's wishes and expectations. This could makelibcurl find and accept a trust chain that it otherwise would not.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- curl < 8.14.1-150700.7.8.1 (version in image is 8.14.1-150700.7.2.1).
-
Description: When doing SSH-based transfers using either SCP or SFTP, and setting theknown_hosts file, libcurl could still mistakenly accept connecting to hosts*not present* in the specified file if they were added as recognized in thelibssh *global* known_hosts file.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- curl < 8.14.1-150700.7.8.1 (version in image is 8.14.1-150700.7.2.1).
-
Description: The attack vector is a potential Denial of Service (DoS). The vulnerability is caused by an insufficient check on the length of a decompressed domain name within a DNS packet.An attacker can craft a malicious DNS packet containing a highly compressed domain name. When the resolv library parses such a packet, the name decompression process consumes a large amount of CPU resources, as the library does not limit the resulting length of the name.This resource consumption can cause the application thread to become unresponsive, resulting in a Denial of Service condition.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: In the CGI gem before 0.4.2 for Ruby, the CGI::Cookie.parse method in the CGI library contains a potential Denial of Service (DoS) vulnerability. The method does not impose any limit on the length of the raw cookie value it processes. This oversight can lead to excessive resource consumption when parsing extremely large cookies.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: In the CGI gem before 0.4.2 for Ruby, a Regular Expression Denial of Service (ReDoS) vulnerability exists in the Util#escapeElement method.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: In the URI gem before 1.0.3 for Ruby, the URI handling methods (URI.join, URI#merge, URI#+) have an inadvertent leakage of authentication credentials because userinfo is retained even after changing the host.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: encodeText in QDom in Qt before 6.8.0 has a complex algorithm involving XML string copy and inline replacement of parts of a string (with relocation of later data).
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libQt5Core5 < 5.15.12+kde151-150600.3.9.1 (version in image is 5.15.12+kde151-150600.3.6.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Add down_write(trace_event_sem) when adding trace eventWhen a module is loaded, it adds trace events defined by the module. Itmay also need to modify the modules trace printk formats to replace enumnames with their values.If two modules are loaded at the same time, the adding of the event to theftrace_events list can corrupt the walking of the list in the code that ismodifying the printk format strings and crash the kernel.The addition of the event should take the trace_event_sem for write whileit adds the new event.Also add a lockdep_assert_held() on that semaphore in__trace_add_event_dirs() as it iterates the list.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPEOn Google gs101, the number of UTP transfer request slots (nutrs) is 32,and in this case the driver ends up programming the UTRL_NEXUS_TYPEincorrectly as 0.This is because the left hand side of the shift is 1, which is of typeint, i.e. 31 bits wide. Shifting by more than that width results inundefined behaviour.Fix this by switching to the BIT() macro, which applies correct typecasting as required. This ensures the correct value is written toUTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shiftwarning: UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21 shift exponent 32 is too large for 32-bit type 'int'For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPEwrite.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sctp: initialize more fields in sctp_v6_from_sk()syzbot found that sin6_scope_id was not properly initialized,leading to undefined behavior.Clear sin6_scope_id and sin6_flowinfo.BUG: KMSAN: uninit-value in __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 __sctp_v6_cmp_addr+0x887/0x8c0 net/sctp/ipv6.c:649 sctp_inet6_cmp_addr+0x4f2/0x510 net/sctp/ipv6.c:983 sctp_bind_addr_conflict+0x22a/0x3b0 net/sctp/bind_addr.c:390 sctp_get_port_local+0x21eb/0x2440 net/sctp/socket.c:8452 sctp_get_port net/sctp/socket.c:8523 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x710/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930 x64_sys_call+0x271d/0x3e20 arch/x86/include/generated/asm/syscalls_64.h:51 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fLocal variable addr.i.i created at: sctp_get_port net/sctp/socket.c:8515 [inline] sctp_listen_start net/sctp/socket.c:8567 [inline] sctp_inet_listen+0x650/0xfd0 net/sctp/socket.c:8636 __sys_listen_socket net/socket.c:1912 [inline] __sys_listen net/socket.c:1927 [inline] __do_sys_listen net/socket.c:1932 [inline] __se_sys_listen net/socket.c:1930 [inline] __x64_sys_listen+0x343/0x4c0 net/socket.c:1930
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ceph: fix race condition validating r_parent before applying stateAdd validation to ensure the cached parent directory inode matches thedirectory info in MDS replies. This prevents client-side race conditionswhere concurrent operations (e.g. rename) cause r_parent to become stalebetween request initiation and reply processing, which could lead toapplying state changes to incorrect directory inodes.[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to move CEPH_CAP_PIN reference when r_parent is updated: When the parent directory lock is not held, req->r_parent can become stale and is updated to point to the correct inode. However, the associated CEPH_CAP_PIN reference was not being adjusted. The CEPH_CAP_PIN is a reference on an inode that is tracked for accounting purposes. Moving this pin is important to keep the accounting balanced. When the pin was not moved from the old parent to the new one, it created two problems: The reference on the old, stale parent was never released, causing a reference leak. A reference for the new parent was never acquired, creating the risk of a reference underflow later in ceph_mdsc_release_request(). This patch corrects the logic by releasing the pin from the old parent and acquiring it for the new parent when r_parent is switched. This ensures reference accounting stays balanced. ]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:crypto: af_alg - Disallow concurrent writes in af_alg_sendmsgIssuing two writes to the same af_alg socket is bogus as thedata will be interleaved in an unpredictable fashion. Furthermore,concurrent writes may create inconsistencies in the internalsocket state.Disallow this by adding a new ctx->write field that indiciatesexclusive ownership for writing.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: mscc: ocelot: Fix use-after-free caused by cyclic delayed workThe origin code calls cancel_delayed_work() in ocelot_stats_deinit()to cancel the cyclic delayed work item ocelot->stats_work. However,cancel_delayed_work() may fail to cancel the work item if it is alreadyexecuting. While destroy_workqueue() does wait for all pending work itemsin the work queue to complete before destroying the work queue, it cannotprevent the delayed work item from being rescheduled within theocelot_check_stats_work() function. This limitation exists because thedelayed work item is only enqueued into the work queue after its timerexpires. Before the timer expiration, destroy_workqueue() has no visibilityof this pending work item. Once the work queue appears empty,destroy_workqueue() proceeds with destruction. When the timer eventuallyexpires, the delayed work item gets queued again, leading to the followingwarning:workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-statsWARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0...RIP: 0010:__queue_work+0x875/0xaf0...RSP: 0018:ffff88806d108b10 EFLAGS: 00010086RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0Call Trace: ? kasan_report+0xc6/0xf0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? __pfx_delayed_work_timer_fn+0x10/0x10 call_timer_fn+0x25/0x1c0 __run_timer_base.part.0+0x3be/0x8c0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x1c0/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ...The following diagram reveals the cause of the above warning:CPU 0 (remove) | CPU 1 (delayed work callback)mscc_ocelot_remove() | ocelot_deinit() | ocelot_check_stats_work() ocelot_stats_deinit() | cancel_delayed_work()| ... | queue_delayed_work() destroy_workqueue() | (wait a time) | __queue_work() //UAFThe above scenario actually constitutes a UAF vulnerability.The ocelot_stats_deinit() is only invoked when initializationfailure or resource destruction, so we must ensure that anydelayed work items cannot be rescheduled.Replace cancel_delayed_work() with disable_delayed_work_sync()to guarantee proper cancellation of the delayed work item andensure completion of any currently executing work before theworkqueue is deallocated.A deadlock concern was considered: ocelot_stats_deinit() is calledin a process context and is not holding any locks that the delayedwork item might also need. Therefore, the use of the _sync() variantis safe here.This bug was identified through static analysis. To reproduce theissue and validate the fix, I simulated ocelot-swit---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/9p: fix double req put in p9_fd_cancelledSyzkaller reports a KASAN issue as below:general protection fault, probably for non-canonical address 0xfbd59c0000000021: 0000 [#1] PREEMPT SMP KASAN NOPTIKASAN: maybe wild-memory-access in range [0xdead000000000108-0xdead00000000010f]CPU: 0 PID: 5083 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00037-g855bd1d7d838 #0Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014RIP: 0010:__list_del include/linux/list.h:114 [inline]RIP: 0010:__list_del_entry include/linux/list.h:137 [inline]RIP: 0010:list_del include/linux/list.h:148 [inline]RIP: 0010:p9_fd_cancelled+0xe9/0x200 net/9p/trans_fd.c:734Call Trace: p9_client_flush+0x351/0x440 net/9p/client.c:614 p9_client_rpc+0xb6b/0xc70 net/9p/client.c:734 p9_client_version net/9p/client.c:920 [inline] p9_client_create+0xb51/0x1240 net/9p/client.c:1027 v9fs_session_init+0x1f0/0x18f0 fs/9p/v9fs.c:408 v9fs_mount+0xba/0xcb0 fs/9p/vfs_super.c:126 legacy_get_tree+0x108/0x220 fs/fs_context.c:632 vfs_get_tree+0x8e/0x300 fs/super.c:1573 do_new_mount fs/namespace.c:3056 [inline] path_mount+0x6a6/0x1e90 fs/namespace.c:3386 do_mount fs/namespace.c:3399 [inline] __do_sys_mount fs/namespace.c:3607 [inline] __se_sys_mount fs/namespace.c:3584 [inline] __x64_sys_mount+0x283/0x300 fs/namespace.c:3584 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8This happens because of a race condition between:- The 9p client sending an invalid flush request and later cleaning it up;- The 9p client in p9_read_work() canceled all pending requests. Thread 1 Thread 2 ... p9_client_create() ... p9_fd_create() ... p9_conn_create() ... // start Thread 2 INIT_WORK(&m->rq, p9_read_work); p9_read_work() ... p9_client_rpc() ... ... p9_conn_cancel() ... spin_lock(&m->req_lock); ... p9_fd_cancelled() ... ... spin_unlock(&m->req_lock); // status rewrite p9_client_cb(m->client, req, REQ_STATUS_ERROR) // first remove list_del(&req->req_list); ... spin_lock(&m->req_lock) ... // second remove list_del(&req->req_list); spin_unlock(&m->req_lock) ...Commit 74d6a5d56629 ("9p/trans_fd: Fix concurrency del of req_list inp9_fd_cancelled/p9_read_work") fixes a concurrency issue in the 9p filesystemclient where the req_list could be deleted simultaneously by bothp9_read_work and p9_fd_cancelled functions, but for the case where req->statusequals REQ_STATUS_RCVD.Update the check for req->status in p9_fd_cancelled to skip processing notjust received requests, but anything that is not SENT, as whateverchanged the state from SENT also removed the request from its list.Found by Linux Verification Center (linuxtesting.org) with Syzkaller.[updated the check from status == RECV || status == ERROR to status != SENT]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp()The hfsplus_strcasecmp() logic can trigger the issue:[ 117.317703][ T9855] ==================================================================[ 117.318353][ T9855] BUG: KASAN: slab-out-of-bounds in hfsplus_strcasecmp+0x1bc/0x490[ 117.318991][ T9855] Read of size 2 at addr ffff88802160f40c by task repro/9855[ 117.319577][ T9855][ 117.319773][ T9855] CPU: 0 UID: 0 PID: 9855 Comm: repro Not tainted 6.17.0-rc6 #33 PREEMPT(full)[ 117.319780][ T9855] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014[ 117.319783][ T9855] Call Trace:[ 117.319785][ T9855] [ 117.319788][ T9855] dump_stack_lvl+0x1c1/0x2a0[ 117.319795][ T9855] ? __virt_addr_valid+0x1c8/0x5c0[ 117.319803][ T9855] ? __pfx_dump_stack_lvl+0x10/0x10[ 117.319808][ T9855] ? rcu_is_watching+0x15/0xb0[ 117.319816][ T9855] ? lock_release+0x4b/0x3e0[ 117.319821][ T9855] ? __kasan_check_byte+0x12/0x40[ 117.319828][ T9855] ? __virt_addr_valid+0x1c8/0x5c0[ 117.319835][ T9855] ? __virt_addr_valid+0x4a5/0x5c0[ 117.319842][ T9855] print_report+0x17e/0x7e0[ 117.319848][ T9855] ? __virt_addr_valid+0x1c8/0x5c0[ 117.319855][ T9855] ? __virt_addr_valid+0x4a5/0x5c0[ 117.319862][ T9855] ? __phys_addr+0xd3/0x180[ 117.319869][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490[ 117.319876][ T9855] kasan_report+0x147/0x180[ 117.319882][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490[ 117.319891][ T9855] hfsplus_strcasecmp+0x1bc/0x490[ 117.319900][ T9855] ? __pfx_hfsplus_cat_case_cmp_key+0x10/0x10[ 117.319906][ T9855] hfs_find_rec_by_key+0xa9/0x1e0[ 117.319913][ T9855] __hfsplus_brec_find+0x18e/0x470[ 117.319920][ T9855] ? __pfx_hfsplus_bnode_find+0x10/0x10[ 117.319926][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10[ 117.319933][ T9855] ? __pfx___hfsplus_brec_find+0x10/0x10[ 117.319942][ T9855] hfsplus_brec_find+0x28f/0x510[ 117.319949][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10[ 117.319956][ T9855] ? __pfx_hfsplus_brec_find+0x10/0x10[ 117.319963][ T9855] ? __kmalloc_noprof+0x2a9/0x510[ 117.319969][ T9855] ? hfsplus_find_init+0x8c/0x1d0[ 117.319976][ T9855] hfsplus_brec_read+0x2b/0x120[ 117.319983][ T9855] hfsplus_lookup+0x2aa/0x890[ 117.319990][ T9855] ? __pfx_hfsplus_lookup+0x10/0x10[ 117.320003][ T9855] ? d_alloc_parallel+0x2f0/0x15e0[ 117.320008][ T9855] ? __lock_acquire+0xaec/0xd80[ 117.320013][ T9855] ? __pfx_d_alloc_parallel+0x10/0x10[ 117.320019][ T9855] ? __raw_spin_lock_init+0x45/0x100[ 117.320026][ T9855] ? __init_waitqueue_head+0xa9/0x150[ 117.320034][ T9855] __lookup_slow+0x297/0x3d0[ 117.320039][ T9855] ? __pfx___lookup_slow+0x10/0x10[ 117.320045][ T9855] ? down_read+0x1ad/0x2e0[ 117.320055][ T9855] lookup_slow+0x53/0x70[ 117.320065][ T9855] walk_component+0x2f0/0x430[ 117.320073][ T9855] path_lookupat+0x169/0x440[ 117.320081][ T9855] filename_lookup+0x212/0x590[ 117.320089][ T9855] ? __pfx_filename_lookup+0x10/0x10[ 117.320098][ T9855] ? strncpy_from_user+0x150/0x290[ 117.320105][ T9855] ? getname_flags+0x1e5/0x540[ 117.320112][ T9855] user_path_at+0x3a/0x60[ 117.320117][ T9855] __x64_sys_umount+0xee/0x160[ 117.320123][ T9855] ? __pfx___x64_sys_umount+0x10/0x10[ 117.320129][ T9855] ? do_syscall_64+0xb7/0x3a0[ 117.320135][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f[ 117.320141][ T9855] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f[ 117.320145][ T9855] do_syscall_64+0xf3/0x3a0[ 117.320150][ T9855] ? exc_page_fault+0x9f/0xf0[ 117.320154][ T9855] entry_SYSCALL_64_after_hwframe+0x77/0x7f[ 117.320158][ T9855] RIP: 0033:0x7f7dd7908b07[ 117.320163][ T9855] Code: 23 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 08[ 117.320167][ T9855] RSP: 002b:00007ffd5ebd9698 EFLAGS: 00000202 ---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nvmet-fc: move lsop put work to nvmet_fc_ls_req_opIt's possible for more than one async command to be in flight from__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.In the current code, only one put work item is queued at a time, whichresults in a leaked reference.To fix this, move the work item to the nvmet_fc_ls_req_op struct, whichalready tracks all resources related to the command.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}Cilium has a BPF egress gateway feature which forces outgoing K8s Podtraffic to pass through dedicated egress gateways which then SNAT thetraffic in order to interact with stable IPs outside the cluster.The traffic is directed to the gateway via vxlan tunnel in collect mdmode. A recent BPF change utilized the bpf_redirect_neigh() helper toforward packets after the arrival and decap on vxlan, which turned outover time that the kmalloc-256 slab usage in kernel was ever-increasing.The issue was that vxlan allocates the metadata_dst object and attachesit through a fake dst entry to the skb. The latter was never releasedthough given bpf_redirect_neigh() was merely setting the new dst entryvia skb_dst_set() without dropping an existing one first.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: ensure no dirty metadata is written back for an fs with errors[BUG]During development of a minor feature (make sure all btrfs_bio::end_io()is called in task context), I noticed a crash in generic/388, wheremetadata writes triggered new works after btrfs_stop_all_workers().It turns out that it can even happen without any code modification, justusing RAID5 for metadata and the same workload from generic/388 is goingto trigger the use-after-free.[CAUSE]If btrfs hits an error, the fs is marked as error, no newtransaction is allowed thus metadata is in a frozen state.But there are some metadata modifications before that error, and they arestill in the btree inode page cache.Since there will be no real transaction commit, all those dirty foliosare just kept as is in the page cache, and they can not be invalidatedby invalidate_inode_pages2() call inside close_ctree(), because they aredirty.And finally after btrfs_stop_all_workers(), we call iput() on btreeinode, which triggers writeback of those dirty metadata.And if the fs is using RAID56 metadata, this will trigger RMW and queuenew works into rmw_workers, which is already stopped, causing warningfrom queue_work() and use-after-free.[FIX]Add a special handling for write_one_eb(), that if the fs is already inan error state, immediately mark the bbio as failure, instead of reallysubmitting them.Then during close_ctree(), iput() will just discard all those dirtytree blocks without really writing them back, thus no more new jobs foralready stopped-and-freed workqueues.The extra discard in write_one_eb() also acts as an extra safenet.E.g. the transaction abort is triggered by some extent/free spacetree corruptions, and since extent/free space tree is already corruptedsome tree blocks may be allocated where they shouldn't be (overwritingexisting tree blocks). In that case writing them back will furthercorrupting the fs.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: Unknown.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- docker > 0-0 (version in image is 28.3.3_ce-150000.230.1).
-
Description: SSH Agent servers do not validate the size of messages when processing new identity requests, which may cause the program to panic if the message is malformed due to an out of bounds read.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- docker > 0-0 (version in image is 28.3.3_ce-150000.230.1).
-
Description: An issue was found in the private API function qDecodeDataUrl() in QtCore, which is used in QTextDocument and QNetworkReply, and, potentially, in user code.If the function was called with malformed data, for example, an URL thatcontained a "charset" parameter that lacked a value (such as"data:charset,"), and Qt was built with assertions enabled, then it would hit an assertion, resulting in a denial of service(abort).This impacts Qt up to 5.15.18, 6.0.0->6.5.8, 6.6.0->6.8.3 and 6.9.0. This has been fixed in 5.15.19, 6.5.9, 6.8.4 and 6.9.1.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libQt5Core5 < 5.15.12+kde151-150600.3.9.1 (version in image is 5.15.12+kde151-150600.3.6.1).
-
Description: SSH servers parsing GSSAPI authentication requests do not validate the number of mechanisms specified in the request, allowing an attacker to cause unbounded memory consumption.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- docker > 0-0 (version in image is 28.3.3_ce-150000.230.1).
-
Description: Unknown.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- docker > 0-0 (version in image is 28.3.3_ce-150000.230.1).
-
Description: ssh in OpenSSH before 10.1 allows control characters in usernames that originate from certain possibly untrusted sources, potentially leading to code execution when a ProxyCommand is used. The untrusted sources are the command line and %-sequence expansion of a configuration file. (A configuration file that provides a complete literal username is not categorized as an untrusted source.)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- openssh < 9.6p1-150600.6.34.1 (version in image is 9.6p1-150600.6.29.2).
-
Description: ssh in OpenSSH before 10.1 allows the '\0' character in an ssh:// URI, potentially leading to code execution when a ProxyCommand is used.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- openssh < 9.6p1-150600.6.34.1 (version in image is 9.6p1-150600.6.29.2).
-
Description: urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.24 and prior to 2.6.0, the number of links in the decompression chain was unbounded allowing a malicious server to insert a virtually unlimited number of compression steps leading to high CPU usage and massive memory allocation for the decompressed data. This vulnerability is fixed in 2.6.0.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- python3-urllib3 > 0-0 (version in image is 1.25.10-150300.4.18.1).
-
Description: urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.0 and prior to 2.6.0, the Streaming API improperly handles highly compressed data. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. When streaming a compressed response, urllib3 can perform decoding or decompression based on the HTTP Content-Encoding header (e.g., gzip, deflate, br, or zstd). The library must read compressed data from the network and decompress it until the requested chunk size is met. Any resulting decompressed data that exceeds the requested amount is held in an internal buffer for the next read operation. The decompression logic could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This can result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- python3-urllib3 > 0-0 (version in image is 1.25.10-150300.4.18.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: fix to detect potential corrupted nid in free_nid_listAs reported, on-disk footer.ino and footer.nid is the same andout-of-range, let's add sanity check on f2fs_alloc_nid() to detectany potential corruption in free_nid_list.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: Marshmallow is a lightweight library for converting complex objects to and from simple Python datatypes. In versions from 3.0.0rc1 to before 3.26.2 and from 4.0.0 to before 4.1.2, Schema.load(data, many=True) is vulnerable to denial of service attacks. A moderately sized request can consume a disproportionate amount of CPU time. This issue has been patched in version 3.26.2 and 4.1.2.
Packages affected:
- sle-module-public-cloud-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-marshmallow > 0-0 (version in image is 3.20.2-150400.9.7.1).
-
Description: AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below contain parser logic which allows non-ASCII decimals to be present in the Range header. There is no known impact, but there is the possibility that there's a method to exploit a request smuggling vulnerability. This issue is fixed in version 3.13.3.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-aiohttp > 0-0 (version in image is 3.9.3-150400.10.33.1).
-
Description: AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below enable an attacker to ascertain the existence of absolute path components through the path normalization logic for static files meant to prevent path traversal. If an application uses web.static() (not recommended for production deployments), it may be possible for an attacker to ascertain the existence of path components. This issue is fixed in version 3.13.3.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311-aiohttp > 0-0 (version in image is 3.9.3-150400.10.33.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:e1000: fix OOB in e1000_tbi_should_accept()In e1000_tbi_should_accept() we read the last byte of the frame via'data[length - 1]' to evaluate the TBI workaround. If the descriptor-reported length is zero or larger than the actual RX buffer size, thisread goes out of bounds and can hit unrelated slab objects. The issueis observed from the NAPI receive path (e1000_clean_rx_irq):==================================================================BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790Read of size 1 at addr ffff888014114e54 by task sshd/363CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014Call Trace: dump_stack_lvl+0x5a/0x74 print_address_description+0x7b/0x440 print_report+0x101/0x200 kasan_report+0xc1/0xf0 e1000_tbi_should_accept+0x610/0x790 e1000_clean_rx_irq+0xa8c/0x1110 e1000_clean+0xde2/0x3c10 __napi_poll+0x98/0x380 net_rx_action+0x491/0xa20 __do_softirq+0x2c9/0x61d do_softirq+0xd1/0x120 __local_bh_enable_ip+0xfe/0x130 ip_finish_output2+0x7d5/0xb00 __ip_queue_xmit+0xe24/0x1ab0 __tcp_transmit_skb+0x1bcb/0x3340 tcp_write_xmit+0x175d/0x6bd0 __tcp_push_pending_frames+0x7b/0x280 tcp_sendmsg_locked+0x2e4f/0x32d0 tcp_sendmsg+0x24/0x40 sock_write_iter+0x322/0x430 vfs_write+0x56c/0xa60 ksys_write+0xd1/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xaeRIP: 0033:0x7f511b476b10Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003RBP: 0000559a9383a400 R08: fffffffffffffff0 R09: 0000000000004f00R10: 0000000000000070 R11: 0000000000000246 R12: 0000000000000000R13: 00007ffc9211d57f R14: 0000559a9347bde7 R15: 0000000000000003 Allocated by task 1: __kasan_krealloc+0x131/0x1c0 krealloc+0x90/0xc0 add_sysfs_param+0xcb/0x8a0 kernel_add_sysfs_param+0x81/0xd4 param_sysfs_builtin+0x138/0x1a6 param_sysfs_init+0x57/0x5b do_one_initcall+0x104/0x250 do_initcall_level+0x102/0x132 do_initcalls+0x46/0x74 kernel_init_freeable+0x28f/0x393 kernel_init+0x14/0x1a0 ret_from_fork+0x22/0x30The buggy address belongs to the object at ffff888014114000 which belongs to the cache kmalloc-2k of size 2048The buggy address is located 1620 bytes to the right of 2048-byte region [ffff888014114000, ffff888014114800]The buggy address belongs to the physical page:page:ffffea0000504400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14110head:ffffea0000504400 order:3 compound_mapcount:0 compound_pincount:0flags: 0x100000000010200(slab|head|node=0|zone=1)raw: 0100000000010200 0000000000000000 dead000000000001 ffff888013442000raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000page dumped because: kasan: bad access detected==================================================================This happens because the TBI check unconditionally dereferences the lastbyte without validating the reported length first: u8 last_byte = *(data + length - 1);Fix by rejecting the frame early if the length is zero, or if it exceedsadapter->rx_buffer_len. This preserves the TBI workaround semantics forvalid frames and prevents touching memory beyond the RX buffer.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability was determined in LibTIFF up to 4.5.1. Affected by this issue is the function readSeparateStripsetoBuffer of the file tools/tiffcrop.c of the component tiffcrop. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The patch is identified as 8a7a48d7a645992ca83062b3a1873c951661e2b3. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libtiff6 < 4.7.1-150600.3.23.1 (version in image is 4.7.0-150600.3.18.1).
-
Description: A security flaw has been discovered in vim up to 9.1.1615. Affected by this vulnerability is the function main of the file src/xxd/xxd.c of the component xxd. The manipulation results in buffer overflow. The attack requires a local approach. The exploit has been released to the public and may be exploited. Upgrading to version 9.1.1616 addresses this issue. The patch is identified as eeef7c77436a78cd27047b0f5fa6925d56de3cb0. It is recommended to upgrade the affected component.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- vim > 0-0 (version in image is 9.1.1629-150500.20.33.1).
-
Description: Calling getnetbyaddr or getnetbyaddr_r with a configured nsswitch.conf that specifies the library's DNS backend for networks and queries for a zero-valued network in the GNU C Library version 2.0 to version 2.42 can leak stack contents to the configured DNS resolver.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glibc > 0-0 (version in image is 2.38-150600.14.37.1).
-
Description: HarfBuzz is a text shaping engine. Prior to version 12.3.0, a null pointer dereference vulnerability exists in the SubtableUnicodesCache::create function located in src/hb-ot-cmap-table.hh. The function fails to check if hb_malloc returns NULL before using placement new to construct an object at the returned pointer address. When hb_malloc fails to allocate memory (which can occur in low-memory conditions or when using custom allocators that simulate allocation failures), it returns NULL. The code then attempts to call the constructor on this null pointer using placement new syntax, resulting in undefined behavior and a Segmentation Fault. This issue has been patched in version 12.3.0.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libharfbuzz0 > 0-0 (version in image is 8.3.0-150600.1.3).
-
Description: In the Linux kernel, the following vulnerability has been resolved:EDAC/i10nm: Skip DIMM enumeration on a disabled memory controllerWhen loading the i10nm_edac driver on some Intel Granite Rapids servers,a call trace may appear as follows: UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16 shift exponent -66 is negative ... __ubsan_handle_shift_out_of_bounds+0x1e3/0x390 skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common] i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac] skx_register_mci+0x159/0x220 [skx_edac_common] i10nm_init+0xcb0/0x1ff0 [i10nm_edac] ...This occurs because some BIOS may disable a memory controller if therearen't any memory DIMMs populated on this memory controller. The DIMMMTRregister of this disabled memory controller contains the invalid value~0, resulting in the call trace above.Fix this call trace by skipping DIMM enumeration on a disabled memorycontroller.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fs/proc: fix uaf in proc_readdir_de()Pde is erased from subdir rbtree through rb_erase(), but not set the nodeto EMPTY, which may result in uaf access. We should use RB_CLEAR_NODE()set the erased node to EMPTY, then pde_subdir_next() will return NULL toavoid uaf access.We found an uaf issue while using stress-ng testing, need to run testcasegetdent and tun in the same time. The steps of the issue is as follows:1) use getdent to traverse dir /proc/pid/net/dev_snmp6/, and current pde is tun3;2) in the [time windows] unregister netdevice tun3 and tun2, and erase them from rbtree. erase tun3 first, and then erase tun2. the pde(tun2) will be released to slab;3) continue to getdent process, then pde_subdir_next() will return pde(tun2) which is released, it will case uaf access.CPU 0 | CPU 1-------------------------------------------------------------------------traverse dir /proc/pid/net/dev_snmp6/ | unregister_netdevice(tun->dev) //tun3 tun2sys_getdents64() | iterate_dir() | proc_readdir() | proc_readdir_de() | snmp6_unregister_dev() pde_get(de); | proc_remove() read_unlock(&proc_subdir_lock); | remove_proc_subtree() | write_lock(&proc_subdir_lock); [time window] | rb_erase(&root->subdir_node, &parent->subdir); | write_unlock(&proc_subdir_lock); read_lock(&proc_subdir_lock); | next = pde_subdir_next(de); | pde_put(de); | de = next; //UAF |rbtree of dev_snmp6 | pde(tun3) / \ NULL pde(tun2)
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: Intel: avs: Do not share the name pointer between componentsBy sharing 'name' directly, tearing down components may lead touse-after-free errors. Duplicate the name to avoid that.At the same time, update the order of operations - since commitcee28113db17 ("ASoC: dmaengine_pcm: Allow passing component name viaconfig") the framework does not override component->name if set beforeinvoking the initializer.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A cross-privilege Spectre v2 vulnerability allows attackers to bypass all deployed mitigations, including the recent Fine(IBT), and to leak arbitrary Linux kernel memory on Intel systems.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: bfa: Double-free fixWhen the bfad_im_probe() function fails during initialization, the memorypointed to by bfad->im is freed without setting bfad->im to NULL.Subsequently, during driver uninstallation, when the state machine entersthe bfad_sm_stopping state and calls the bfad_im_probe_undo() function,it attempts to free the memory pointed to by bfad->im again, therebytriggering a double-free vulnerability.Set bfad->im to NULL if probing fails.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: core: config: Prevent OOB read in SS endpoint companion parsingusb_parse_ss_endpoint_companion() checks descriptor type before length,enabling a potentially odd read outside of the buffer size.Fix this up by checking the size first before looking at any of thefields in the descriptor.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netfilter: nft_objref: validate objref and objrefmap expressionsReferencing a synproxy stateful object from OUTPUT hook causes kernelcrash due to infinite recursive calls:BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)[...]Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0[...]Implement objref and objrefmap expression validate functions.Currently, only NFT_OBJECT_SYNPROXY object type requires validation.This will also handle a jump to a chain using a synproxy object from theOUTPUT hook.Now when trying to reference a synproxy object in the OUTPUT hook, nftwill produce the following error:synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: containerd is an open-source container runtime. Versions 1.7.28 and below, 2.0.0-beta.0 through 2.0.6, 2.1.0-beta.0 through 2.1.4, and 2.2.0-beta.0 through 2.2.0-rc.1 contain a bug in the CRI Attach implementation where a user can exhaust memory on the host due to goroutine leaks. This issue is fixed in versions 1.7.29, 2.0.7, 2.1.5 and 2.2.0. To workaround this vulnerability, users can set up an admission controller to control accesses to pods/attach resources.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- containerd < 1.7.29-150000.128.1 (version in image is 1.7.27-150000.123.1).
-
Description: Incorrect behavior order for some Intel(R) Core(tm) Ultra Processors may allow an unauthenticated user to potentially enable information disclosure via physical access.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability has been identified in the GRUB2 bootloader's network module that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the net_set_vlan command is not properly unregistered when the network module is unloaded from memory. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- grub2 < 2.12-150700.19.19.1 (version in image is 2.12-150700.19.16.1).
-
Description: A use-after-free vulnerability has been identified in the GNU GRUB (Grand Unified Bootloader). The flaw occurs because the file-closing process incorrectly retains a memory pointer, leaving an invalid reference to a file system structure. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- grub2 < 2.12-150700.19.19.1 (version in image is 2.12-150700.19.16.1).
-
Description: A Use-After-Free vulnerability has been discovered in GRUB's gettext module. This flaw stems from a programming error where the gettext command remains registered in memory after its module is unloaded. An attacker can exploit this condition by invoking the orphaned command, causing the application to access a memory location that is no longer valid. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- grub2 < 2.12-150700.19.19.1 (version in image is 2.12-150700.19.16.1).
-
Description: A vulnerability has been identified in the GRUB2 bootloader's normal command that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the normal command is not properly unregistered when the module is unloaded. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability. Impact on the data integrity and confidentiality is also not discarded.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- grub2 < 2.12-150700.19.19.1 (version in image is 2.12-150700.19.16.1).
-
Description: A vulnerability in the GRUB2 bootloader has been identified in the normal module. This flaw, a memory Use After Free issue, occurs because the normal_exit command is not properly unregistered when its related module is unloaded. An attacker can exploit this condition by invoking the command after the module has been removed, causing the system to improperly access a previously freed memory location. This leads to a system crash or possible impacts in data confidentiality and integrity.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- grub2 < 2.12-150700.19.19.1 (version in image is 2.12-150700.19.16.1).
-
Description: A flaw was found in glib. An integer overflow during temporary file creation leads to an out-of-bounds memory access, allowing an attacker to potentially perform path traversal or access private temporary file content by creating symbolic links. This vulnerability allows a local attacker to manipulate file paths and access unauthorized data. The core issue stems from insufficient validation of file path lengths during temporary file operations.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glib2-tools < 2.78.6-150600.4.22.1 (version in image is 2.78.6-150600.4.16.1).
-
Description: A vulnerability has been identified in the GRUB (Grand Unified Bootloader) component. This flaw occurs because the bootloader mishandles string conversion when reading information from a USB device, allowing an attacker to exploit inconsistent length values. A local attacker can connect a maliciously configured USB device during the boot sequence to trigger this issue. A successful exploitation may lead GRUB to crash, leading to a Denial of Service. Data corruption may be also possible, although given the complexity of the exploit the impact is most likely limited.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- grub2 < 2.12-150700.19.19.1 (version in image is 2.12-150700.19.16.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ovl: fix null pointer dereference in ovl_permission()Following process: P1 P2 path_lookupat link_path_walk inode_permission ovl_permission ovl_i_path_real(inode, &realpath) path->dentry = ovl_i_dentry_upper(inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL realinode = d_inode(realpath.dentry) // return NULL inode_permission(realinode) inode->i_sb // NULL pointer dereference, will trigger an null pointer dereference at realinode: [ 335.664979] BUG: kernel NULL pointer dereference, address: 0000000000000002 [ 335.668032] CPU: 0 PID: 2592 Comm: ls Not tainted 6.3.0 [ 335.669956] RIP: 0010:inode_permission+0x33/0x2c0 [ 335.678939] Call Trace: [ 335.679165] [ 335.679371] ovl_permission+0xde/0x320 [ 335.679723] inode_permission+0x15e/0x2c0 [ 335.680090] link_path_walk+0x115/0x550 [ 335.680771] path_lookupat.isra.0+0xb2/0x200 [ 335.681170] filename_lookup+0xda/0x240 [ 335.681922] vfs_statx+0xa6/0x1f0 [ 335.682233] vfs_fstatat+0x7b/0xb0Fetch a reproducer in [Link].Use the helper ovl_i_path_realinode() to get realinode and then donon-nullptr checking.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_noneAfter grabbing q->sysfs_lock, q->elevator may become NULL because ofelevator switch.Fix the NULL dereference on q->elevator by checking it with lock.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/rxe: Fix unsafe drain work queue codeIf create_qp does not fully succeed it is possible for qp cleanupcode to attempt to drain the send or recv work queues before thequeues have been created causing a seg fault. This patch checksto see if the queues exist before attempting to drain them.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:null_blk: fix poll request timeout handlingWhen doing io_uring benchmark on /dev/nullb0, it's easy to crash thekernel if poll requests timeout triggered, as reported by David. [1]BUG: kernel NULL pointer dereference, address: 0000000000000008Workqueue: kblockd blk_mq_timeout_workRIP: 0010:null_timeout_rq+0x4e/0x91Call Trace: ? null_timeout_rq+0x4e/0x91 blk_mq_handle_expired+0x31/0x4b bt_iter+0x68/0x84 ? bt_tags_iter+0x81/0x81 __sbitmap_for_each_set.constprop.0+0xb0/0xf2 ? __blk_mq_complete_request_remote+0xf/0xf bt_for_each+0x46/0x64 ? __blk_mq_complete_request_remote+0xf/0xf ? percpu_ref_get_many+0xc/0x2a blk_mq_queue_tag_busy_iter+0x14d/0x18e blk_mq_timeout_work+0x95/0x127 process_one_work+0x185/0x263 worker_thread+0x1b5/0x227This is indeed a race problem between null_timeout_rq() and null_poll().null_poll() null_timeout_rq() spin_lock(&nq->poll_lock) list_splice_init(&nq->poll_list, &list) spin_unlock(&nq->poll_lock) while (!list_empty(&list)) req = list_first_entry() list_del_init() ... blk_mq_add_to_batch() // req->rq_next = NULL spin_lock(&nq->poll_lock) // rq->queuelist->next == NULL list_del_init(&rq->queuelist) spin_unlock(&nq->poll_lock)Fix these problems by setting requests state to MQ_RQ_COMPLETE undernq->poll_lock protection, in which null_timeout_rq() can safely detectthis race and early return.Note this patch just fix the kernel panic when request timeout happen.[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: insert tree mod log move in push_node_leftThere is a fairly unlikely race condition in tree mod log rewind thatcan result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP [530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1 [530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017 [530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00 [530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246 [530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100 [530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8 [530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff [530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000 [530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0 [530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000 [530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0 [530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [530.928] Call Trace: [530.934] ? btrfs_printk+0x13b/0x18c [530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130 [530.955] btrfs_map_bio+0x75/0x330 [530.963] ? kmem_cache_alloc+0x12a/0x2d0 [530.973] ? btrfs_submit_metadata_bio+0x63/0x100 [530.984] btrfs_submit_metadata_bio+0xa4/0x100 [530.995] submit_extent_page+0x30f/0x360 [531.004] read_extent_buffer_pages+0x49e/0x6d0 [531.015] ? submit_extent_page+0x360/0x360 [531.025] btree_read_extent_buffer_pages+0x5f/0x150 [531.037] read_tree_block+0x37/0x60 [531.046] read_block_for_search+0x18b/0x410 [531.056] btrfs_search_old_slot+0x198/0x2f0 [531.066] resolve_indirect_ref+0xfe/0x6f0 [531.076] ? ulist_alloc+0x31/0x60 [531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0 [531.095] find_parent_nodes+0x720/0x1830 [531.105] ? ulist_alloc+0x10/0x60 [531.113] iterate_extent_inodes+0xea/0x370 [531.123] ? btrfs_previous_extent_item+0x8f/0x110 [531.134] ? btrfs_search_path_in_tree+0x240/0x240 [531.146] iterate_inodes_from_logical+0x98/0xd0 [531.157] ? btrfs_search_path_in_tree+0x240/0x240 [531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180 [531.179] btrfs_ioctl+0xe2/0x2eb0This occurs when logical inode resolution takes a tree mod log sequencenumber, and then while backref walking hits a rewind on a busy nodewhich has the following sequence of tree mod log operations (numbersfilled in from a specific example, but they are somewhat arbitrary) REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0When this sequence gets applied via btrfs_tree_mod_log_rewind, itallocates a fresh rewind eb, and first inserts the correct key info forthe 533 elements, then overwrites the first 456 of them, then decrementsthe count by 456 via the add ops, then rewinds the move by doing amemmove from 456:988->0:532. We have never written anything past 532,---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Check for NOT_READY flag state after lockingCurrently the check for NOT_READY flag is performed before obtaining thenecessary lock. This opens a possibility for race condition when the flowis concurrently removed from unready_flows list by the workqueue task,which causes a double-removal from the list and a crash[0]. Fix the issueby moving the flag check inside the section protected byuplink_priv->unready_flows_lock mutex.[0]:[44376.389654] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP[44376.391665] CPU: 7 PID: 59123 Comm: tc Not tainted 6.4.0-rc4+ #1[44376.392984] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014[44376.395342] RIP: 0010:mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core][44376.396857] Code: 00 48 8b b8 68 ce 02 00 e8 8a 4d 02 00 4c 8d a8 a8 01 00 00 4c 89 ef e8 8b 79 88 e1 48 8b 83 98 06 00 00 48 8b 93 90 06 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 90 06[44376.399167] RSP: 0018:ffff88812cc97570 EFLAGS: 00010246[44376.399680] RAX: dead000000000122 RBX: ffff8881088e3800 RCX: ffff8881881bac00[44376.400337] RDX: dead000000000100 RSI: ffff88812cc97500 RDI: ffff8881242f71b0[44376.401001] RBP: ffff88811cbb0940 R08: 0000000000000400 R09: 0000000000000001[44376.401663] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88812c944000[44376.402342] R13: ffff8881242f71a8 R14: ffff8881222b4000 R15: 0000000000000000[44376.402999] FS: 00007f0451104800(0000) GS:ffff88852cb80000(0000) knlGS:0000000000000000[44376.403787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[44376.404343] CR2: 0000000000489108 CR3: 0000000123a79003 CR4: 0000000000370ea0[44376.405004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000[44376.405665] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400[44376.406339] Call Trace:[44376.406651] [44376.406939] ? die_addr+0x33/0x90[44376.407311] ? exc_general_protection+0x192/0x390[44376.407795] ? asm_exc_general_protection+0x22/0x30[44376.408292] ? mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core][44376.408876] __mlx5e_tc_del_fdb_peer_flow+0xbc/0xe0 [mlx5_core][44376.409482] mlx5e_tc_del_flow+0x42/0x210 [mlx5_core][44376.410055] mlx5e_flow_put+0x25/0x50 [mlx5_core][44376.410529] mlx5e_delete_flower+0x24b/0x350 [mlx5_core][44376.411043] tc_setup_cb_reoffload+0x22/0x80[44376.411462] fl_reoffload+0x261/0x2f0 [cls_flower][44376.411907] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core][44376.412481] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core][44376.413044] tcf_block_playback_offloads+0x76/0x170[44376.413497] tcf_block_unbind+0x7b/0xd0[44376.413881] tcf_block_setup+0x17d/0x1c0[44376.414269] tcf_block_offload_cmd.isra.0+0xf1/0x130[44376.414725] tcf_block_offload_unbind+0x43/0x70[44376.415153] __tcf_block_put+0x82/0x150[44376.415532] ingress_destroy+0x22/0x30 [sch_ingress][44376.415986] qdisc_destroy+0x3b/0xd0[44376.416343] qdisc_graft+0x4d0/0x620[44376.416706] tc_get_qdisc+0x1c9/0x3b0[44376.417074] rtnetlink_rcv_msg+0x29c/0x390[44376.419978] ? rep_movs_alternative+0x3a/0xa0[44376.420399] ? rtnl_calcit.isra.0+0x120/0x120[44376.420813] netlink_rcv_skb+0x54/0x100[44376.421192] netlink_unicast+0x1f6/0x2c0[44376.421573] netlink_sendmsg+0x232/0x4a0[44376.421980] sock_sendmsg+0x38/0x60[44376.422328] ____sys_sendmsg+0x1d0/0x1e0[44376.422709] ? copy_msghdr_from_user+0x6d/0xa0[44376.423127] ___sys_sendmsg+0x80/0xc0[44376.423495] ? ___sys_recvmsg+0x8b/0xc0[44376.423869] __sys_sendmsg+0x51/0x90[44376.424226] do_syscall_64+0x3d/0x90[44376.424587] entry_SYSCALL_64_after_hwframe+0x46/0xb0[44376.425046] RIP: 0033:0x7f045134f887[44376.425403] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: ath11k: fix memory leak in WMI firmware statsMemory allocated for firmware pdev, vdev and beacon statisticsare not released during rmmod.Fix it by calling ath11k_fw_stats_free() function before hardwareunregister.While at it, avoid calling ath11k_fw_stats_free() while processingthe firmware stats received in the WMI event because the local listis getting spliced and reinitialised and hence there are no elementsin the list after splicing.Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()If 'mipid_detect()' fails, we must free 'md' to avoid a memory leak.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup}If the filename casefolding fails, we'll be leaking memory from thefscrypt_name struct, namely from the 'crypto_buf.name' member.Make sure we free it in the error path on both ext4_fname_setup_filename()and ext4_fname_prepare_lookup() functions.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:blk-iocost: use spin_lock_irqsave in adjust_inuse_and_calc_costadjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabledwhen unlock. DEADLOCK might happen if we have held other locks and disabledIRQ before invoking it.Fix it by using spin_lock_irqsave() instead, which can keep IRQ stateconsistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f #26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_interrupt+0xfd/0x420 run_sysvec_on_irqstack_cond sysvec_apic_timer_interrupt+0x46/0xa0 asm_sysvec_apic_timer_interrupt+0x12/0x20 irq event stamp: 837522 hardirqs last enabled at (837521): [] __raw_spin_unlock_irqrestore hardirqs last enabled at (837521): [] _raw_spin_unlock_irqrestore+0x3d/0x40 hardirqs last disabled at (837522): [] __raw_spin_lock_irq hardirqs last disabled at (837522): [] _raw_spin_lock_irq+0x43/0x50 softirqs last enabled at (835852): [] __do_softirq+0x558/0x8ec softirqs last disabled at (835845): [] asm_call_irq_on_stack+0xf/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bfqd->lock); lock(&bfqd->lock); *** DEADLOCK *** 3 locks held by kworker/2:3/388: #0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0 #1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0 #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 stack backtrace: CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kthrotld blk_throtl_dispatch_work_fn Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 print_usage_bug valid_state mark_lock_irq.cold+0x32/0x3a mark_lock+0x693/0xbc0 mark_held_locks+0x9e/0xe0 __trace_hardirqs_on_caller lockdep_hardirqs_on_prepare.part.0+0x151/0x360 trace_hardirqs_on+0x5b/0x180 __raw_spin_unlock_irq _raw_spin_unlock_irq+0x24/0x40 spin_unlock_irq adjust_inuse_and_calc_cost+0x4fb/0x970 ioc_rqos_merge+0x277/0x740 __rq_qos_merge+0x62/0xb0 rq_qos_merge bio_attempt_back_merge+0x12c/0x4a0 blk_mq_sched_try_merge+0x1b6/0x4d0 bfq_bio_merge+0x24a/0x390 __blk_mq_sched_bio_merge+0xa6/0x460 blk_mq_sched_bio_merge blk_mq_submit_bio+0x2e7/0x1ee0 __submit_bio_noacct_mq+0x175/0x3b0 submit_bio_noacct+0x1fb/0x270 blk_throtl_dispatch_work_fn+0x1ef/0x2b0 process_one_work+0x83e/0x13f0 process_scheduled_works worker_thread+0x7e3/0xd80 kthread+0x353/0x470 ret_from_fork+0x1f/0x30
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:netlink: fix potential deadlock in netlink_set_err()syzbot reported a possible deadlock in netlink_set_err() [1]A similar issue was fixed in commit 1d482e666b8e ("netlink: disable IRQsfor netlink_lock_table()") in netlink_lock_table()This patch adds IRQ safety to netlink_set_err() and __netlink_diag_dump()which were not covered by cited commit.[1]WARNING: possible irq lock inversion dependency detected6.4.0-rc6-syzkaller-00240-g4e9f0ec38852 #0 Not taintedsyz-executor.2/23011 just changed the state of lock:ffffffff8e1a7a58 (nl_table_lock){.+.?}-{2:2}, at: netlink_set_err+0x2e/0x3a0 net/netlink/af_netlink.c:1612but this lock was taken by another, SOFTIRQ-safe lock in the past: (&local->queue_stop_reason_lock){..-.}-{2:2}and interrupts could create inverse lock ordering between them.other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(nl_table_lock); local_irq_disable(); lock(&local->queue_stop_reason_lock); lock(nl_table_lock); lock(&local->queue_stop_reason_lock); *** DEADLOCK ***
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:interconnect: Fix locking for runpm vs reclaimFor cases where icc_bw_set() can be called in callbaths that coulddeadlock against shrinker/reclaim, such as runpm resume, we need todecouple the icc locking. Introduce a new icc_bw_lock for cases wherewe need to serialize bw aggregation and update to decouple that frompaths that require memory allocation such as node/link creation/destruction.Fixes this lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.2.0-rc8-debug+ #554 Not tainted ------------------------------------------------------ ring0/132 is trying to acquire lock: ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234 but task is already holding lock: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x74/0xc0 dma_resv_lockdep+0x1f4/0x2f4 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x80/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 topology_parse_cpu_capacity+0x8c/0x178 get_cpu_for_node+0x88/0xc4 parse_cluster+0x1b0/0x28c parse_cluster+0x8c/0x28c init_cpu_topology+0x168/0x188 smp_prepare_cpus+0x24/0xf8 kernel_init_freeable+0x18c/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #2 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire+0x3c/0x48 fs_reclaim_acquire+0x54/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 kzalloc.constprop.0+0x14/0x20 icc_node_create_nolock+0x4c/0xc4 icc_node_create+0x38/0x58 qcom_icc_rpmh_probe+0x1b8/0x248 platform_probe+0x70/0xc4 really_probe+0x158/0x290 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x44/0x100 __driver_attach+0xf8/0x108 bus_for_each_dev+0x78/0xc4 driver_attach+0x2c/0x38 bus_add_driver+0xd0/0x1d8 driver_register+0xbc/0xf8 __platform_driver_register+0x30/0x3c qnoc_driver_init+0x24/0x30 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #1 (icc_lock){+.+.}-{3:3}: __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 icc_set_bw+0x88/0x2b4 _set_opp_bw+0x8c/0xd8 _set_opp+0x19c/0x300 dev_pm_opp_set_opp+0x84/0x94 a6xx_gmu_resume+0x18c/0x804 a6xx_pm_resume+0xf8/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc adreno_load_gpu+0xc4/0x17c msm_open+0x50/0x120 drm_file_alloc+0x17c/0x228 drm_open_helper+0x74/0x118 drm_open+0xa0/0x144 drm_stub_open+0xd4/0xe4 chrdev_open+0x1b8/0x1e4 do_dentry_open+0x2f8/0x38c vfs_open+0x34/0x40 path_openat+0x64c/0x7b4 do_filp_open+0x54/0xc4 do_sys_openat2+0x9c/0x100 do_sys_open+0x50/0x7c __arm64_sys_openat+0x28/0x34 invoke_syscall+0x8c/0x128 el0_svc_common.constprop.0+0xa0/0x11c do_el0_---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/ivpu: Fix locking order in ivpu_job_submitFix deadlock in job submission and abort handling.When a thread aborts currently executing jobs due to a fault,it first locks the global lock protecting submitted_jobs (#1).After the last job is destroyed, it proceeds to release the related contextand locks file_priv (#2). Meanwhile, in the job submission thread,the file_priv lock (#2) is taken first, and then the submitted_jobslock (#1) is obtained when a job is added to the submitted jobs list. CPU0 CPU1 ---- ---- (for example due to a fault) (jobs submissions keep coming) lock(&vdev->submitted_jobs_lock) #1 ivpu_jobs_abort_all() job_destroy() lock(&file_priv->lock) #2 lock(&vdev->submitted_jobs_lock) #1 file_priv_release() lock(&vdev->context_list_lock) lock(&file_priv->lock) #2This order of locking causes a deadlock. To resolve this issue,change the order of locking in ivpu_job_submit().
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/vmalloc: fix data race in show_numa_info()The following data-race was found in show_numa_info():==================================================================BUG: KCSAN: data-race in vmalloc_info_show / vmalloc_info_showread to 0xffff88800971fe30 of 4 bytes by task 8289 on cpu 0: show_numa_info mm/vmalloc.c:4936 [inline] vmalloc_info_show+0x5a8/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299....write to 0xffff88800971fe30 of 4 bytes by task 8287 on cpu 1: show_numa_info mm/vmalloc.c:4934 [inline] vmalloc_info_show+0x38f/0x7e0 mm/vmalloc.c:5016 seq_read_iter+0x373/0xb40 fs/seq_file.c:230 proc_reg_read_iter+0x11e/0x170 fs/proc/inode.c:299....value changed: 0x0000008f -> 0x00000000==================================================================According to this report,there is a read/write data-race becausem->private is accessible to multiple CPUs. To fix this, instead ofallocating the heap in proc_vmalloc_init() and passing the heap address tom->private, vmalloc_info_show() should allocate the heap.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structureIf a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, theresultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() mayoccur before sli4_hba.hdwqs are allocated. This may result in a nullpointer dereference when attempting to take the abts_io_buf_list_lock forthe first hardware queue. Fix by adding a null ptr check onphba->sli4_hba.hdwq and early return because this situation means theremust have been an error during port initialization.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()snd_soc_remove_pcm_runtime() might be called with rtd == NULL which willleads to null pointer dereference.This was reproduced with topology loading and marking a link as ignoredue to missing hardware component on the system.On module removal the soc_tplg_remove_link() would callsnd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored,no runtime was created.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lockWhen netpoll is enabled, calling pr_warn_once() while holdingkmemleak_lock in mem_pool_alloc() can cause a deadlock due to lockinversion with the netconsole subsystem. This occurs becausepr_warn_once() may trigger netpoll, which eventually leads to__alloc_skb() and back into kmemleak code, attempting to reacquirekmemleak_lock.This is the path for the deadlock.mem_pool_alloc() -> raw_spin_lock_irqsave(&kmemleak_lock, flags); -> pr_warn_once() -> netconsole subsystem -> netpoll -> __alloc_skb -> __create_object -> raw_spin_lock_irqsave(&kmemleak_lock, flags);Fix this by setting a flag and issuing the pr_warn_once() afterkmemleak_lock is released.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:Bluetooth: l2cap: Check encryption key size on incoming connectionThis is required for passing GAP/SEC/SEM/BI-04-C PTS test case: Security Mode 4 Level 4, Responder - Invalid Encryption Key Size - 128 bitThis tests the security key with size from 1 to 15 bytes while theSecurity Mode 4 Level 4 requests 16 bytes key size.Currently PTS fails with the following logs:- expected:Connection Response: Code: [3 (0x03)] Code Identifier: (lt)WildCard: Exists(gt) Length: [8 (0x0008)] Destination CID: (lt)WildCard: Exists(gt) Source CID: [64 (0x0040)] Result: [3 (0x0003)] Connection refused - Security block Status: (lt)WildCard: Exists(gt),but received:Connection Response: Code: [3 (0x03)] Code Identifier: [1 (0x01)] Length: [8 (0x0008)] Destination CID: [64 (0x0040)] Source CID: [64 (0x0040)] Result: [0 (0x0000)] Connection Successful Status: [0 (0x0000)] No further information availableAnd HCI logs:< HCI Command: Read Encrypti.. (0x05|0x0008) plen 2 Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)> HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Success (0x00) Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) Key size: 7> ACL Data RX: Handle 14 flags 0x02 dlen 12 L2CAP: Connection Request (0x02) ident 1 len 4 PSM: 4097 (0x1001) Source CID: 64< ACL Data TX: Handle 14 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 1 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mwifiex: Initialize the chan_stats array to zeroThe adapter->chan_stats[] array is initialized inmwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero outmemory. The array is filled in mwifiex_update_chan_statistics()and then the user can query the data in mwifiex_cfg80211_dump_survey().There are two potential issues here. What if the user callsmwifiex_cfg80211_dump_survey() before the data has been filled in.Also the mwifiex_update_chan_statistics() function doesn't necessarilyinitialize the whole array. Since the array was not initialized atthe start that could result in an information leak.Also this array is pretty small. It's a maximum of 900 bytes so it'smore appropriate to use kcalloc() instead vmalloc().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cgroup: split cgroup_destroy_wq into 3 workqueuesA hung task can occur during [1] LTP cgroup testing when repeatedlymounting/unmounting perf_event and net_prio controllers withsystemd.unified_cgroup_hierarchy=1. The hang manifests incgroup_lock_and_drain_offline() during root destruction.Related case:cgroup_fj_function_perf_event cgroup_fj_function.sh perf_eventcgroup_fj_function_net_prio cgroup_fj_function.sh net_prioCall Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8 worker_thread+0x22c/0x3b0 kthread+0xec/0x100 ret_from_fork+0x10/0x20Root Cause:CPU0 CPU1mount perf_event umount net_priocgroup1_get_tree cgroup_kill_sbrebind_subsystems // root destruction enqueues // cgroup_destroy_wq// kill all perf_event css // one perf_event css A is dying // css A offline enqueues cgroup_destroy_wq // root destruction will be executed first css_free_rwork_fn cgroup_destroy_root cgroup_lock_and_drain_offline // some perf descendants are dying // cgroup_destroy_wq max_active = 1 // waiting for css A to dieProblem scenario:1. CPU0 mounts perf_event (rebind_subsystems)2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work3. A dying perf_event CSS gets queued for offline after root destruction4. Root destruction waits for offline completion, but offline work is blocked behind root destruction in cgroup_destroy_wq (max_active=1)Solution:Split cgroup_destroy_wq into three dedicated workqueues:cgroup_offline_wq - Handles CSS offline operationscgroup_release_wq - Manages resource releasecgroup_free_wq - Performs final memory deallocationThis separation eliminates blocking in the CSS free path while waiting foroffline operations to complete.[1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/hugetlb: fix folio is still mapped when deletedMigration may be raced with fallocating hole. remove_inode_single_foliowill unmap the folio if the folio is still mapped. However, it's calledwithout folio lock. If the folio is migrated and the mapped pte has beenconverted to migration entry, folio_mapped() returns false, and won'tunmap it. Due to extra refcount held by remove_inode_single_folio,migration fails, restores migration entry to normal pte, and the folio ismapped again. As a result, we triggered BUG in filemap_unaccount_folio.The log is as follows: BUG: Bad page cache in process hugetlb pfn:156c00 page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00 head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0 aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file" flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f4(hugetlb) page dumped because: still mapped when deleted CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x4f/0x70 filemap_unaccount_folio+0xc4/0x1c0 __filemap_remove_folio+0x38/0x1c0 filemap_remove_folio+0x41/0xd0 remove_inode_hugepages+0x142/0x250 hugetlbfs_fallocate+0x471/0x5a0 vfs_fallocate+0x149/0x380Hold folio lock before checking if the folio is mapped to avold race withmigration.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/smc: fix warning in smc_rx_splice() when calling get_page()smc_lo_register_dmb() allocates DMB buffers with kzalloc(), which arelater passed to get_page() in smc_rx_splice(). Since kmalloc memory isnot page-backed, this triggers WARN_ON_ONCE() in get_page() and preventsholding a refcount on the buffer. This can lead to use-after-free ifthe memory is released before splice_to_pipe() completes.Use folio_alloc() instead, ensuring DMBs are page-backed and safe forget_page().WARNING: CPU: 18 PID: 12152 at ./include/linux/mm.h:1330 smc_rx_splice+0xaf8/0xe20 [smc]CPU: 18 UID: 0 PID: 12152 Comm: smcapp Kdump: loaded Not tainted 6.17.0-rc3-11705-g9cf4672ecfee #10 NONEHardware name: IBM 3931 A01 704 (z/VM 7.4.0)Krnl PSW : 0704e00180000000 000793161032696c (smc_rx_splice+0xafc/0xe20 [smc]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3Krnl GPRS: 0000000000000000 001cee80007d3001 00077400000000f8 0000000000000005 0000000000000001 001cee80007d3006 0007740000001000 001c000000000000 000000009b0c99e0 0000000000001000 001c0000000000f8 001c000000000000 000003ffcc6f7c88 0007740003e98000 0007931600000005 000792969b2ff7b8Krnl Code: 0007931610326960: af000000 mc 0,0 0007931610326964: a7f4ff43 brc 15,00079316103267ea #0007931610326968: af000000 mc 0,0 >000793161032696c: a7f4ff3f brc 15,00079316103267ea 0007931610326970: e320f1000004 lg %r2,256(%r15) 0007931610326976: c0e53fd1b5f5 brasl %r14,000793168fd5d560 000793161032697c: a7f4fbb5 brc 15,00079316103260e6 0007931610326980: b904002b lgr %r2,%r11Call Trace: smc_rx_splice+0xafc/0xe20 [smc] smc_rx_splice+0x756/0xe20 [smc]) smc_rx_recvmsg+0xa74/0xe00 [smc] smc_splice_read+0x1ce/0x3b0 [smc] sock_splice_read+0xa2/0xf0 do_splice_read+0x198/0x240 splice_file_to_pipe+0x7e/0x110 do_splice+0x59e/0xde0 __do_splice+0x11a/0x2d0 __s390x_sys_splice+0x140/0x1f0 __do_syscall+0x122/0x280 system_call+0x6e/0x90Last Breaking-Event-Address:smc_rx_splice+0x960/0xe20 [smc]---[ end trace 0000000000000000 ]---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/waitid: always prune wait queue entry in io_waitid_wait()For a successful return, always remove our entry from the wait queueentry list. Previously this was skipped if a cancelation was inprogress, but this can race with another invocation of the wait queueentry callback.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/vmwgfx: Fix Use-after-free in validationNodes stored in the validation duplicates hashtable come from an arenaallocator that is cleared at the end of vmw_execbuf_process. All nodesare expected to be cleared in vmw_validation_drop_ht but this node escapedbecause its resource was destroyed prematurely.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:dm: fix NULL pointer dereference in __dm_suspend()There is a race condition between dm device suspend and table load thatcan lead to null pointer dereference. The issue occurs when suspend isinvoked before table load completes:BUG: kernel NULL pointer dereference, address: 0000000000000054Oops: 0000 [#1] PREEMPT SMP PTICPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50Call Trace: blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0The issue can be triggered as below:T1 T2dm_suspend table_load__dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1)dm_stop_queue / dm_wait_for_completion=> q->tag_set NULL pointer! (2) => q->tag_set = set; (3)Fix this by checking if a valid table (map) exists before performingrequest-based suspend and waiting for target I/O. When map is NULL,skip these table-dependent suspend steps.Even when map is NULL, no I/O can reach any target because there isno table loaded; I/O submitted in this state will fail early in theDM layer. Skipping the table-dependent suspend logic in this caseis safe and avoids NULL pointer dereferences.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:blk-mq: fix potential deadlock while nr_requests grownAllocate and free sched_tags while queue is freezed can deadlock[1],this is a long term problem, hence allocate memory before freezingqueue and free memory after queue is unfreezed.[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usbnet: Fix using smp_processor_id() in preemptible code warningsSyzbot reported the following warning:BUG: using smp_processor_id() in preemptible [00000000] code: dhcpcd/2879caller is usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331CPU: 1 UID: 0 PID: 2879 Comm: dhcpcd Not tainted 6.15.0-rc4-syzkaller-00098-g615dca38c2ea #0 PREEMPT(voluntary)Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 check_preemption_disabled+0xd0/0xe0 lib/smp_processor_id.c:49 usbnet_skb_return+0x74/0x490 drivers/net/usb/usbnet.c:331 usbnet_resume_rx+0x4b/0x170 drivers/net/usb/usbnet.c:708 usbnet_change_mtu+0x1be/0x220 drivers/net/usb/usbnet.c:417 __dev_set_mtu net/core/dev.c:9443 [inline] netif_set_mtu_ext+0x369/0x5c0 net/core/dev.c:9496 netif_set_mtu+0xb0/0x160 net/core/dev.c:9520 dev_set_mtu+0xae/0x170 net/core/dev_api.c:247 dev_ifsioc+0xa31/0x18d0 net/core/dev_ioctl.c:572 dev_ioctl+0x223/0x10e0 net/core/dev_ioctl.c:821 sock_do_ioctl+0x19d/0x280 net/socket.c:1204 sock_ioctl+0x42f/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fFor historical and portability reasons, the netif_rx() is usuallyrun in the softirq or interrupt context, this commit therefore addlocal_bh_disable/enable() protection in the usbnet_resume_rx().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/ip6_tunnel: Prevent perpetual tunnel growthSimilarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.While ipv4 tunnel headroom adjustment growth was limited incommit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),ipv6 tunnel yet increases the headroom without any ceiling.Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.Credits to Francesco Ruggeri, who was originally debugging this issueand wrote local Arista-specific patch and a reproducer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: verify orphan file size is not too bigIn principle orphan file can be arbitrarily large. However orphan replayneeds to traverse it all and we also pin all its buffers in memory. Thusfilesystems with absurdly large orphan files can lead to big amounts ofmemory consumed. Limit orphan file size to a sane value and also usekvmalloc() for allocating array of block descriptor structures to avoidlarge order allocations for sane but large orphan files.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request()The cpufreq_cpu_put() call in update_qos_request() takes place too earlybecause the latter subsequently calls freq_qos_update_request() thatindirectly accesses the policy object in question through the QoS requestobject passed to it.Fortunately, update_qos_request() is called under intel_pstate_driver_lock,so this issue does not matter for changing the intel_pstate operationmode, but it theoretically can cause a crash to occur on CPU device hotremoval (which currently can only happen in virt, but it is formallysupported nevertheless).Address this issue by modifying update_qos_request() to drop thereference to the policy later.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:cifs: client: fix memory leak in smb3_fs_context_parse_paramThe user calls fsconfig twice, but when the program exits, free() onlyfrees ctx->source for the second fsconfig, not the first.Regarding fc->source, there is no code in the fs context related to itsmemory reclamation.To fix this memory leak, release the source memory corresponding to ctxor fc before each parsing.syzbot reported:BUG: memory leakunreferenced object 0xffff888128afa360 (size 96): backtrace (crc 79c9c7ba): kstrdup+0x3c/0x80 mm/util.c:84 smb3_fs_context_parse_param+0x229b/0x36c0 fs/smb/client/fs_context.c:1444BUG: memory leakunreferenced object 0xffff888112c7d900 (size 96): backtrace (crc 79c9c7ba): smb3_fs_context_fullpath+0x70/0x1b0 fs/smb/client/fs_context.c:629 smb3_fs_context_parse_param+0x2266/0x36c0 fs/smb/client/fs_context.c:1438
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:page_pool: always add GFP_NOWARN for ATOMIC allocationsDriver authors often forget to add GFP_NOWARN for page allocationfrom the datapath. This is annoying to users as OOMs are a factof life, and we pretty much expect network Rx to hit page allocationfailures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocationsby default.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: renesas_usbhs: Fix synchronous external abort on unbindA synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind isexecuted after the configuration sequence described above:modprobe usb_f_ecmmodprobe libcompositemodprobe configfscd /sys/kernel/config/usb_gadgetmkdir -p g1cd g1echo "0x1d6b" > idVendorecho "0x0104" > idProductmkdir -p strings/0x409echo "0123456789" > strings/0x409/serialnumberecho "Renesas." > strings/0x409/manufacturerecho "Ethernet Gadget" > strings/0x409/productmkdir -p functions/ecm.usb0mkdir -p configs/c.1mkdir -p configs/c.1/strings/0x409echo "ECM" > configs/c.1/strings/0x409/configurationif [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1fiecho 11e20000.usb > UDCecho 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbindThe displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80 Call trace: usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P) usbhsg_pullup+0x4c/0x7c [renesas_usbhs] usb_gadget_disconnect_locked+0x48/0xd4 gadget_unbind_driver+0x44/0x114 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_release_driver+0x18/0x24 bus_remove_device+0xcc/0x10c device_del+0x14c/0x404 usb_del_gadget+0x88/0xc0 usb_del_gadget_udc+0x18/0x30 usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs] usbhs_mod_remove+0x20/0x30 [renesas_usbhs] usbhs_remove+0x98/0xdc [renesas_usbhs] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xb8 drv_attr_store+0x24/0x38 sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x2ac/0x350 ksys_write+0x68/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021) ---[ end trace 0000000000000000 ]--- note: sh[188] exited with irqs disabled note: sh[188] exited with preempt_count 1The issue occurs because usbhs_sys_function_pullup(), which accesses the IPregisters, is executed after the USBHS clocks have been disabled. Theproblem is reproducible on the Renesas RZ/G3S SoC starting with theaddition of module stop in the clock enable/disable APIs. With module stopfunctionality enabled, a bus error is expected if a master accesses amodule whose clock has been stopped and module stop activated.Disable the IP clocks at the end of remove.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Clear cmds after chip resetCommit aefed3e5548f ("scsi: qla2xxx: target: Fix offline port handlingand host reset handling") caused two problems:1. Commands sent to FW, after chip reset got stuck and never freed as FW is not going to respond to them anymore.2. BUG_ON(cmd->sg_mapped) in qlt_free_cmd(). Commit 26f9ce53817a ("scsi: qla2xxx: Fix missed DMA unmap for aborted commands") attempted to fix this, but introduced another bug under different circumstances when two different CPUs were racing to call qlt_unmap_sg() at the same time: BUG_ON(!valid_dma_direction(dir)) in dma_unmap_sg_attrs().So revert "scsi: qla2xxx: Fix missed DMA unmap for aborted commands" andpartially revert "scsi: qla2xxx: target: Fix offline port handling andhost reset handling" at __qla2x00_abort_all_cmds.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lockblk_mq_{add,del}_queue_tag_set() functions add and remove queues fromtagset, the functions make sure that tagset and queues are marked asshared when two or more queues are attached to the same tagset.Initially a tagset starts as unshared and when the number of addedqueues reaches two, blk_mq_add_queue_tag_set() marks it as shared alongwith all the queues attached to it. When the number of attached queuesdrops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset andthe remaining queues as unshared.Both functions need to freeze current queues in tagset before setting onunsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functionshold set->tag_list_lock mutex, which makes sense as we do not wantqueues to be added or deleted in the process. This used to work fineuntil commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset")made the nvme driver quiesce tagset instead of quiscing individualqueues. blk_mq_quiesce_tagset() does the job and quiesce the queues inset->tag_list while holding set->tag_list_lock also.This results in deadlock between two threads with these stacktraces: __schedule+0x47c/0xbb0 ? timerqueue_add+0x66/0xb0 schedule+0x1c/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.constprop.0+0x271/0x600 blk_mq_quiesce_tagset+0x25/0xc0 nvme_dev_disable+0x9c/0x250 nvme_timeout+0x1fc/0x520 blk_mq_handle_expired+0x5c/0x90 bt_iter+0x7e/0x90 blk_mq_queue_tag_busy_iter+0x27e/0x550 ? __blk_mq_complete_request_remote+0x10/0x10 ? __blk_mq_complete_request_remote+0x10/0x10 ? __call_rcu_common.constprop.0+0x1c0/0x210 blk_mq_timeout_work+0x12d/0x170 process_one_work+0x12e/0x2d0 worker_thread+0x288/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 __schedule+0x47c/0xbb0 ? xas_find+0x161/0x1a0 schedule+0x1c/0xa0 blk_mq_freeze_queue_wait+0x3d/0x70 ? destroy_sched_domains_rcu+0x30/0x30 blk_mq_update_tag_set_shared+0x44/0x80 blk_mq_exit_queue+0x141/0x150 del_gendisk+0x25a/0x2d0 nvme_ns_remove+0xc9/0x170 nvme_remove_namespaces+0xc7/0x100 nvme_remove+0x62/0x150 pci_device_remove+0x23/0x60 device_release_driver_internal+0x159/0x200 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x112/0x1e0 vfs_write+0x2b1/0x3d0 ksys_write+0x4e/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53The top stacktrace is showing nvme_timeout() called to handle nvmecommand timeout. timeout handler is trying to disable the controller andas a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq notto call queue callback handlers. The thread is stuck waiting forset->tag_list_lock as it tries to walk the queues in set->tag_list.The lock is held by the second thread in the bottom stack which iswaiting for one of queues to be frozen. The queue usage counter willdrop to zero after nvme_timeout() finishes, and this will not happenbecause the thread will wait for this mutex forever.Given that [un]quiescing queue is an operation that does not need tosleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of takingset->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCUsafe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list)in blk_mq_del_queue_tag_set() because we can not re-initialize it whilethe list is being traversed under RCU. The deleted queue will not beadded/deleted to/from a tagset and it will be freed in blk_free_queue()after the end of RCU grace period.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:f2fs: fix to avoid updating compression context during writebackBai, Shuangpeng reported a bug as below:Oops: divide error: 0000 [#1] SMP KASAN PTICPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857Call Trace: f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3290 [inline] f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317 do_writepages+0x38e/0x640 mm/page-writeback.c:2634 filemap_fdatawrite_wbc mm/filemap.c:386 [inline] __filemap_fdatawrite_range mm/filemap.c:419 [inline] file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794 f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294 generic_write_sync include/linux/fs.h:3043 [inline] f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x7e9/0xe00 fs/read_write.c:686 ksys_write+0x19d/0x2d0 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fThe bug was triggered w/ below race condition:fsync setattr ioctl- f2fs_do_sync_file - file_write_and_wait_range - f2fs_write_cache_pages : inode is non-compressed : cc.cluster_size = F2FS_I(inode)->i_cluster_size = 0 - tag_pages_for_writeback - f2fs_setattr - truncate_setsize - f2fs_truncate - f2fs_fileattr_set - f2fs_setflags_common - set_compress_context : F2FS_I(inode)->i_cluster_size = 4 : set_inode_flag(inode, FI_COMPRESSED_FILE) - f2fs_compressed_file : return true - f2fs_all_cluster_page_ready : "pgidx % cc->cluster_size" trigger dividing 0 issueLet's change as below to fix this issue:- introduce a new atomic type variable .writeback in structure f2fs_inode_infoto track the number of threads which calling f2fs_write_cache_pages().- use .i_sem lock to protect .writeback update.- check .writeback before update compression context in f2fs_setflags_common()to avoid race w/ ->writepages.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_createWhen sync() and link() are called concurrently, both threads mayenter hfs_bnode_find() without finding the node in the hash tableand proceed to create it.Thread A: hfsplus_write_inode() -> hfsplus_write_system_inode() -> hfs_btree_write() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0)Thread B: hfsplus_create_cat() -> hfs_brec_insert() -> hfs_bnode_split() -> hfs_bmap_alloc() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0)In this case, thread A creates the bnode, sets refcnt=1, and hashes it.Thread B also tries to create the same bnode, notices it has alreadybeen inserted, drops its own instance, and uses the hashed one withoutgetting the node.``` node2 = hfs_bnode_findhash(tree, cnid); if (!node2) { <- Thread A hash = hfs_bnode_hash(cnid); node->next_hash = tree->node_hash[hash]; tree->node_hash[hash] = node; tree->node_hash_cnt++; } else { <- Thread B spin_unlock(&tree->hash_lock); kfree(node); wait_event(node2->lock_wq, !test_bit(HFS_BNODE_NEW, &node2->flags)); return node2; }```However, hfs_bnode_find() requires each call to take a reference.Here both threads end up setting refcnt=1. When they later put the node,this triggers:BUG_ON(!atomic_read(&node->refcnt))In this scenario, Thread B in fact finds the node in the hash tablerather than creating a new one, and thus must take a reference.Fix this by calling hfs_bnode_get() when reusing a bnode newly created byanother thread to ensure the refcount is updated correctly.A similar bug was fixed in HFS long ago in commita9dc087fd3c4 ("fix missing hfs_bnode_get() in __hfs_bnode_create")but the same issue remained in HFS+ until now.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: don't log conflicting inode if it's a dir moved in the current transactionWe can't log a conflicting inode if it's a directory and it was movedfrom one parent directory to another parent directory in the currenttransaction, as this can result an attempt to have a directory withtwo hard links during log replay, one for the old parent directory andanother for the new parent directory.The following scenario triggers that issue:1) We have directories "dir1" and "dir2" created in a past transaction. Directory "dir1" has inode A as its parent directory;2) We move "dir1" to some other directory;3) We create a file with the name "dir1" in directory inode A;4) We fsync the new file. This results in logging the inode of the new file and the inode for the directory "dir1" that was previously moved in the current transaction. So the log tree has the INODE_REF item for the new location of "dir1";5) We move the new file to some other directory. This results in updating the log tree to included the new INODE_REF for the new location of the file and removes the INODE_REF for the old location. This happens during the rename when we call btrfs_log_new_name();6) We fsync the file, and that persists the log tree changes done in the previous step (btrfs_log_new_name() only updates the log tree in memory);7) We have a power failure;8) Next time the fs is mounted, log replay happens and when processing the inode for directory "dir1" we find a new INODE_REF and add that link, but we don't remove the old link of the inode since we have not logged the old parent directory of the directory inode "dir1".As a result after log replay finishes when we trigger writeback of thesubvolume tree's extent buffers, the tree check will detect that we havea directory a hard link count of 2 and we get a mount failure.The errors and stack traces reported in dmesg/syslog are like this: [ 3845.729764] BTRFS info (device dm-0): start tree-log replay [ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c [ 3845.731236] memcg:ffff9264c02f4e00 [ 3845.731751] aops:btree_aops [btrfs] ino:1 [ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8 [ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00 [ 3845.735305] page dumped because: eb page dump [ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir [ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5 [ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701 [ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384 [ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0 [ 3845.737797] rdev 0 sequence 2 flags 0x0 [ 3845.737798] atime 1764259517.0 [ 3845.737800] ctime 1764259517.572889464 [ 3845.737801] mtime 1764259517.572889464 [ 3845.737802] otime 1764259517.0 [ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [ 3845.737805] index 0 name_len 2 [ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34 [ 3845.737808] location key (257 1 0) type 2 [ 3845.737810] transid 9 data_len 0 name_len 4 [ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34 [ 3845.737813] location key (258 1 0) type 2 [ 3845.737814] transid 9 data_len 0 name_len 4 [ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [ 3845.737816] location key (257 1 0) type 2 [---truncated---
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fsnotify: do not generate ACCESS/MODIFY events on child for special filesinotify/fanotify do not allow users with no read access to a file tosubscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow thesame user to subscribe for watching events on children when the userhas access to the parent directory (e.g. /dev).Users with no read access to a file but with read access to its parentdirectory can still stat the file and see if it was accessed/modifiedvia atime/mtime change.The same is not true for special files (e.g. /dev/null). Users will notgenerally observe atime/mtime changes when other users read/write tospecial files, only when someone sets atime/mtime via utimensat().Align fsnotify events with this stat behavior and do not generateACCESS/MODIFY events to parent watchers on read/write of special files.The events are still generated to parent watchers on utimensat(). Thiscloses some side-channels that could be possibly used for informationexfiltration [1].[1] https://snee.la/pdf/pubs/file-notification-attacks.pdf
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:perf/x86/amd: Check event before enable to avoid GPFOn AMD machines cpuc->events[idx] can become NULL in a subtle racecondition with NMI->throttle->x86_pmu_stop().Check event for NULL in amd_pmu_enable_all() before enable to avoid a GPF.This appears to be an AMD only issue.Syzkaller reported a GPF in amd_pmu_enable_all.INFO: NMI handler (perf_event_nmi_handler) took too long to run: 13.143 msecsOops: general protection fault, probably for non-canonical address 0xdffffc0000000034: 0000 PREEMPT SMP KASAN NOPTIKASAN: null-ptr-deref in range [0x00000000000001a0-0x00000000000001a7]CPU: 0 UID: 0 PID: 328415 Comm: repro_36674776 Not tainted 6.12.0-rc1-syzkRIP: 0010:x86_pmu_enable_event (arch/x86/events/perf_event.h:1195 arch/x86/events/core.c:1430)RSP: 0018:ffff888118009d60 EFLAGS: 00010012RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000RDX: 0000000000000034 RSI: 0000000000000000 RDI: 00000000000001a0RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002R13: ffff88811802a440 R14: ffff88811802a240 R15: ffff8881132d8601FS: 00007f097dfaa700(0000) GS:ffff888118000000(0000) GS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 00000000200001c0 CR3: 0000000103d56000 CR4: 00000000000006f0Call Trace: amd_pmu_enable_all (arch/x86/events/amd/core.c:760 (discriminator 2))x86_pmu_enable (arch/x86/events/core.c:1360)event_sched_out (kernel/events/core.c:1191 kernel/events/core.c:1186 kernel/events/core.c:2346)__perf_remove_from_context (kernel/events/core.c:2435)event_function (kernel/events/core.c:259)remote_function (kernel/events/core.c:92 (discriminator 1) kernel/events/core.c:72 (discriminator 1))__flush_smp_call_function_queue (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/csd.h:64 kernel/smp.c:135 kernel/smp.c:540)__sysvec_call_function_single (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./arch/x86/include/asm/trace/irq_vectors.h:99 arch/x86/kernel/smp.c:272)sysvec_call_function_single (arch/x86/kernel/smp.c:266 (discriminator 47) arch/x86/kernel/smp.c:266 (discriminator 47))
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ext4: xattr: fix null pointer deref in ext4_raw_inode()If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED),iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all()lacks error checking, this will lead to a null pointer dereferencein ext4_raw_inode(), called right after ext4_get_inode_loc().Found by Linux Verification Center (linuxtesting.org) with SVACE.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/mediatek: fix use-after-free on probe deferralThe driver is dropping the references taken to the larb devices duringprobe after successful lookup as well as on errors. This canpotentially lead to a use-after-free in case a larb device has not yetbeen bound to its driver so that the iommu driver probe defers.Fix this by keeping the references as expected while the iommu driver isbound.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv4: Fix reference count leak when using error routes with nexthop objectsWhen a nexthop object is deleted, it is marked as dead and thenfib_table_flush() is called to flush all the routes that are using thedead nexthop.The current logic in fib_table_flush() is to only flush error routes(e.g., blackhole) when it is called as part of network namespacedismantle (i.e., with flush_all=true). Therefore, error routes are notflushed when their nexthop object is deleted: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip route add 198.51.100.1/32 nhid 1 # ip route add blackhole 198.51.100.2/32 nhid 1 # ip nexthop del id 1 # ip route show blackhole 198.51.100.2 nhid 1 dev dummy1As such, they keep holding a reference on the nexthop object which inturn holds a reference on the nexthop device, resulting in a referencecount leak: # ip link del dev dummy1 [ 70.516258] unregister_netdevice: waiting for dummy1 to become free. Usage count = 2Fix by flushing error routes when their nexthop is marked as dead.IPv6 does not suffer from this problem.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFSD: NFSv4 file creation neglects setting ACLAn NFSv4 client that sets an ACL with a named principal during filecreation retrieves the ACL afterwards, and finds that it is only adefault ACL (based on the mode bits) and not the ACL that wasrequested during file creation. This violates RFC 8881 section6.4.1.3: "the ACL attribute is set as given".The issue occurs in nfsd_create_setattr(), which callsnfsd_attrs_valid() to determine whether to call nfsd_setattr().However, nfsd_attrs_valid() checks only for iattr changes andsecurity labels, but not POSIX ACLs. When only an ACL is present,the function returns false, nfsd_setattr() is skipped, and thePOSIX ACL is never applied to the inode.Subsequently, when the client retrieves the ACL, the server findsno POSIX ACL on the inode and returns one generated from the file'smode bits rather than returning the originally-specified ACL.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: v4l2-mem2mem: add lock to protect parameter num_rdyGetting below error when using KCSAN to check the driver. Adding lock toprotect parameter num_rdy when getting the value with function:v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queuekworker/u16:3: [name:report&]kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability, which was classified as problematic, was found in GNU Binutils up to 2.43. This affects the function disassemble_bytes of the file binutils/objdump.c. The manipulation of the argument buf leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 2.44 is able to address this issue. The identifier of the patch is baac6c221e9d69335bf41366a1c7d87d8ab2f893. It is recommended to upgrade the affected component.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: Unknown.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- docker > 0-0 (version in image is 28.3.3_ce-150000.230.1).
-
Description: A vulnerability was found in GNU Binutils 2.43 and classified as critical. This issue affects the function _bfd_elf_gc_mark_rsec of the file elflink.c of the component ld. The manipulation leads to heap-based buffer overflow. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The patch is named f9978defb6fab0bd8583942d97c112b0932ac814. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability, which was classified as critical, was found in GNU Binutils 2.43. Affected is the function bfd_elf_reloc_symbol_deleted_p of the file bfd/elflink.c of the component ld. The manipulation leads to memory corruption. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The patch is identified as b425859021d17adf62f06fb904797cf8642986ad. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:arm64/fpsimd: Discard stale CPU state when handling SME trapsThe logic for handling SME traps manipulates saved FPSIMD/SVE/SME stateincorrectly, and a race with preemption can result in a task havingTIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU stateis stale (e.g. with SME traps enabled). This can result in warnings fromdo_sme_acc() where SME traps are not expected while TIF_SME is set:| /* With TIF_SME userspace shouldn't generate any traps */| if (test_and_set_thread_flag(TIF_SME))| WARN_ON(1);This is very similar to the SVE issue we fixed in commit: 751ecf6afd6568ad ("arm64/sve: Discard stale CPU state when handling SVE traps")The race can occur when the SME trap handler is preempted before andafter manipulating the saved FPSIMD/SVE/SME state, starting and ending onthe same CPU, e.g.| void do_sme_acc(unsigned long esr, struct pt_regs *regs)| {| // Trap on CPU 0 with TIF_SME clear, SME traps enabled| // task->fpsimd_cpu is 0.| // per_cpu_ptr(&fpsimd_last_state, 0) is task.|| ...|| // Preempted; migrated from CPU 0 to CPU 1.| // TIF_FOREIGN_FPSTATE is set.|| get_cpu_fpsimd_context();|| /* With TIF_SME userspace shouldn't generate any traps */| if (test_and_set_thread_flag(TIF_SME))| WARN_ON(1);|| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {| unsigned long vq_minus_one =| sve_vq_from_vl(task_get_sme_vl(current)) - 1;| sme_set_vq(vq_minus_one);|| fpsimd_bind_task_to_cpu();| }|| put_cpu_fpsimd_context();|| // Preempted; migrated from CPU 1 to CPU 0.| // task->fpsimd_cpu is still 0| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:| // - Stale HW state is reused (with SME traps enabled)| // - TIF_FOREIGN_FPSTATE is cleared| // - A return to userspace skips HW state restore| }Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is setby calling fpsimd_flush_task_state() to detach from the saved CPUstate. This ensures that a subsequent context switch will not reuse thestale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing thenew state to be reloaded from memory prior to a return to userspace.Note: this was originallly posted as [1].[ Rutland: rewrite commit message ]
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:udf: Fix uninitialized array access for some pathnamesFor filenames that begin with . and are between 2 and 5 characters long,UDF charset conversion code would read uninitialized memory in theoutput buffer. The only practical impact is that the name may be prepended a"unification hash" when it is not actually needed but still it is goodto fix this.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: mediatek: mt8183: Add back SSPM related clocksThis reverts commit 860690a93ef23b567f781c1b631623e27190f101.On the MT8183, the SSPM related clocks were removed claiming a lack ofusage. This however causes some issues when the driver was converted tothe new simple-probe mechanism. This mechanism allocates enough spacefor all the clocks defined in the clock driver, not the highest indexin the DT binding. This leads to out-of-bound writes if their are holesin the DT binding or the driver (due to deprecated or unimplementedclocks). These errors can go unnoticed and cause memory corruption,leading to crashes in unrelated areas, or nothing at all. KASAN willdetect them.Add the SSPM related clocks back to the MT8183 clock driver to fullyimplement the DT binding. The SSPM clocks are for the power managementco-processor, and should never be turned off. They are marked as such.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:md/raid10: check slab-out-of-bounds in md_bitmap_get_counterIf we write a large number to md/bitmap_set_bits, md_bitmap_checkpage()will return -EINVAL because 'page >= bitmap->pages', but the return valuewas not checked immediately in md_bitmap_get_counter() in order to set*blocks value and slab-out-of-bounds occurs.Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() andreturn directly if true.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ice: Block switchdev mode when ADQ is active and vice versaADQ and switchdev are not supported simultaneously. Enabling both at thesame time can result in nullptr dereference.To prevent this, check if ADQ is active when changing devlink mode toswitchdev mode, and check if switchdev is active when enabling ADQ.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:can: gs_usb: fix time stamp counter initializationIf the gs_usb device driver is unloaded (or unbound) before theinterface is shut down, the USB stack first calls the structusb_driver::disconnect and then the struct net_device_ops::ndo_stopcallback.In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no moreRX'ed CAN frames are send from the USB device to the host. Later ings_can_close() a reset control message is send to each CAN channel toremove the controller from the CAN bus. In this race window the USBdevice can still receive CAN frames from the bus and internally queuethem to be send to the host.At least in the current version of the candlelight firmware, the queueof received CAN frames is not emptied during the reset command. Afterloading (or binding) the gs_usb driver, new URBs are submitted duringthe struct net_device_ops::ndo_open callback and the candlelightfirmware starts sending its already queued CAN frames to the host.However, this scenario was not considered when implementing thehardware timestamp function. The cycle counter/time counterinfrastructure is set up (gs_usb_timestamp_init()) after the USBs aresubmitted, resulting in a NULL pointer dereference iftimecounter_cyc2time() (via the call chain:gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() ->gs_usb_skb_set_timestamp()) is called too early.Move the gs_usb_timestamp_init() function before the URBs aresubmitted to fix this problem.For a comprehensive solution, we need to consider gs_usb devices withmore than 1 channel. The cycle counter/time counter infrastructure issetup per channel, but the RX URBs are per device. Once gs_can_open()of _a_ channel has been called, and URBs have been submitted, thegs_usb_receive_bulk_callback() can be called for _all_ availablechannels, even for channels that are not running, yet. As cyclecounter/time counter has not set up, this will again lead to a NULLpointer dereference.Convert the cycle counter/time counter from a "per channel" to a "perdevice" functionality. Also set it up, before submitting any URBs tothe device.Further in gs_usb_receive_bulk_callback(), don't process any URBs fornot started CAN channels, only resubmit the URB.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: check for station first in client probeWhen probing a client, first check if we have it, and thencheck for the channel context, otherwise you can triggerthe warning there easily by probing when the AP isn't evenstarted yet. Since a client existing means the AP is alsooperating, we can then keep the warning.Also simplify the moved code a bit.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:octeontx2-af: Add validation before accessing cgx and lmacwith the addition of new MAC blocks like CN10K RPM and CN10KBRPM_USX, LMACs are noncontiguous and CGX blocks are alsononcontiguous. But during RVU driver initialization, the driveris assuming they are contiguous and trying to accesscgx or lmac with their id which is resulting in kernel panic.This patch fixes the issue by adding proper checks.[ 23.219150] pc : cgx_lmac_read+0x38/0x70[ 23.219154] lr : rvu_program_channels+0x3f0/0x498[ 23.223852] sp : ffff000100d6fc80[ 23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:000000000000005a[ 23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:fffffffffff0f000
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drivers/perf: hisi: Don't migrate perf to the CPU going to teardownThe driver needs to migrate the perf context if the current using CPU goingto teardown. By the time calling the cpuhp::teardown() callback thecpu_online_mask() hasn't updated yet and still includes the CPU going toteardown. In current driver's implementation we may migrate the contextto the teardown CPU and leads to the below calltrace:...[ 368.104662][ T932] task:cpuhp/0 state:D stack: 0 pid: 15 ppid: 2 flags:0x00000008[ 368.113699][ T932] Call trace:[ 368.116834][ T932] __switch_to+0x7c/0xbc[ 368.120924][ T932] __schedule+0x338/0x6f0[ 368.125098][ T932] schedule+0x50/0xe0[ 368.128926][ T932] schedule_preempt_disabled+0x18/0x24[ 368.134229][ T932] __mutex_lock.constprop.0+0x1d4/0x5dc[ 368.139617][ T932] __mutex_lock_slowpath+0x1c/0x30[ 368.144573][ T932] mutex_lock+0x50/0x60[ 368.148579][ T932] perf_pmu_migrate_context+0x84/0x2b0[ 368.153884][ T932] hisi_pcie_pmu_offline_cpu+0x90/0xe0 [hisi_pcie_pmu][ 368.160579][ T932] cpuhp_invoke_callback+0x2a0/0x650[ 368.165707][ T932] cpuhp_thread_fun+0xe4/0x190[ 368.170316][ T932] smpboot_thread_fn+0x15c/0x1a0[ 368.175099][ T932] kthread+0x108/0x13c[ 368.179012][ T932] ret_from_fork+0x10/0x18...Use function cpumask_any_but() to find one correct active cpu to fixesthis issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ring-buffer: Fix deadloop issue on reading trace_pipeSoft lockup occurs when reading file 'trace_pipe': watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488] [...] RIP: 0010:ring_buffer_empty_cpu+0xed/0x170 RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218 RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901 R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000 [...] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __find_next_entry+0x1a8/0x4b0 ? peek_next_entry+0x250/0x250 ? down_write+0xa5/0x120 ? down_write_killable+0x130/0x130 trace_find_next_entry_inc+0x3b/0x1d0 tracing_read_pipe+0x423/0xae0 ? tracing_splice_read_pipe+0xcb0/0xcb0 vfs_read+0x16b/0x490 ksys_read+0x105/0x210 ? __ia32_sys_pwrite64+0x200/0x200 ? switch_fpu_return+0x108/0x220 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6Through the vmcore, I found it's because in tracing_read_pipe(),ring_buffer_empty_cpu() found some buffer is not empty but then itcannot read anything due to "rb_num_of_entries() == 0" always true,Then it infinitely loop the procedure due to user buffer not beenfilled, see following code path: tracing_read_pipe() { ... ... waitagain: tracing_wait_pipe() // 1. find non-empty buffer here trace_find_next_entry_inc() // 2. loop here try to find an entry __find_next_entry() ring_buffer_empty_cpu(); // 3. find non-empty buffer peek_next_entry() // 4. but peek always return NULL ring_buffer_peek() rb_buffer_peek() rb_get_reader_page() // 5. because rb_num_of_entries() == 0 always true here // then return NULL // 6. user buffer not been filled so goto 'waitgain' // and eventually leads to an deadloop in kernel!!! }By some analyzing, I found that when resetting ringbuffer, the 'entries'of its pages are not all cleared (see rb_reset_cpu()). Then when reducingthe ringbuffer, and if some reduced pages exist dirty 'entries' data, theywill be added into 'cpu_buffer->overrun' (see rb_remove_pages()), whichcause wrong 'overrun' count and eventually cause the deadloop issue.To fix it, we need to clear every pages in rb_reset_cpu().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bcache: Fix __bch_btree_node_alloc to make the failure behavior consistentIn some specific situations, the return value of __bch_btree_node_allocmay be NULL. This may lead to a potential NULL pointer dereference incaller function like a calling chain :btree_split->bch_btree_node_alloc->__bch_btree_node_alloc.Fix it by initializing the return value in __bch_btree_node_alloc.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:riscv: move memblock_allow_resize() after linear mapping is readyThe initial memblock metadata is accessed from kernel image mapping. Theregions arrays need to "reallocated" from memblock and accessed throughlinear mapping to cover more memblock regions. So the resizing shouldnot be allowed until linear mapping is ready. Note that there arememblock allocations when building linear mapping.This patch is similar to 24cc61d8cb5a ("arm64: memblock: don't permitmemblock resizing until linear mapping is up").In following log, many memblock regions are reserved beforecreate_linear_mapping_page_table(). And then it triggered reallocationof memblock.reserved.regions and memcpy the old array in kernel imagemapping to the new array in linear mapping which caused a page fault.[ 0.000000] memblock_reserve: [0x00000000bf01f000-0x00000000bf01ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf021000-0x00000000bf021fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf023000-0x00000000bf023fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf025000-0x00000000bf025fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf027000-0x00000000bf027fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf029000-0x00000000bf029fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf02b000-0x00000000bf02bfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf02d000-0x00000000bf02dfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf02f000-0x00000000bf02ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] memblock_reserve: [0x00000000bf030000-0x00000000bf030fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6[ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000[ 0.000000] memblock_reserve: [0x00000000bf000000-0x00000000bf001fed] paging_init+0x19a/0x5ae[ 0.000000] memblock_phys_alloc_range: 4096 bytes align=0x1000 from=0x0000000000000000 max_addr=0x0000000000000000 alloc_pmd_fixmap+0x14/0x1c[ 0.000000] memblock_reserve: [0x000000017ffff000-0x000000017fffffff] memblock_alloc_range_nid+0xb8/0x128[ 0.000000] memblock: reserved is doubled to 256 at [0x000000017fffd000-0x000000017fffe7ff][ 0.000000] Unable to handle kernel paging request at virtual address ff600000ffffd000[ 0.000000] Oops [#1][ 0.000000] Modules linked in:[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.4.0-rc1-00011-g99a670b2069c #66[ 0.000000] Hardware name: riscv-virtio,qemu (DT)[ 0.000000] epc : __memcpy+0x60/0xf8[ 0.000000] ra : memblock_double_array+0x192/0x248[ 0.000000] epc : ffffffff8081d214 ra : ffffffff80a3dfc0 sp : ffffffff81403bd0[ 0.000000] gp : ffffffff814fbb38 tp : ffffffff8140dac0 t0 : 0000000001600000[ 0.000000] t1 : 0000000000000000 t2 : 000000008f001000 s0 : ffffffff81403c60[ 0.000000] s1 : ffffffff80c0bc98 a0 : ff600000ffffd000 a1 : ffffffff80c0bcd8[ 0.000000] a2 : 0000000000000c00 a3 : ffffffff80c0c8d8 a4 : 0000000080000000[ 0.000000] a5 : 0000000000080000 a6 : 0000000000000000 a7 : 0000000080200000[ 0.000000] s2 : ff600000ffffd000 s3 : 0000000000002000 s4 : 0000000000000c00[ 0.000000] s5 : ffffffff80c0bc60 s6 : ffffffff80c0bcc8 s7 : 0000000000000000[ 0.000000] s8 : ffffffff814fd0a8 s9 : 000000017fffe7ff s10: 0000000000000000[ 0.000000] s11: 0000000000001000 t3 : 0000000000001000 t4 : 0000000000000000[ 0.000000] t5 : 000000008f003000 t6 : ff600000ffffd000[ 0.000000] status: 0000000200000100 badaddr: ff600000ffffd000 cause: 000000000000000f[ 0.000000] [
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smb: Log an error when close_all_cached_dirs failsUnder low-memory conditions, close_all_cached_dirs() can't move thedentries to a separate list to dput() them once the locks are dropped.This will result in a "Dentry still in use" error, so add an errormessage that makes it clear this is what happened:[ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries[ 495.281595] ------------[ cut here ]------------[ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs][ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0Also, bail out of looping through all tcons as soon as a singleallocation fails, since we're already in trouble, and kmalloc() attemptsfor subseqeuent tcons are likely to fail just like the first one did.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:exfat: add cluster chain loop check for dirAn infinite loop may occur if the following conditions occur due tofile system corruption.(1) Condition for exfat_count_dir_entries() to loop infinitely. - The cluster chain includes a loop. - There is no UNUSED entry in the cluster chain.(2) Condition for exfat_create_upcase_table() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and up-case table entry in the cluster chain of the root directory.(3) Condition for exfat_load_bitmap() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and bitmap entry in the cluster chain of the root directory.(4) Condition for exfat_find_dir_entry() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation.(5) Condition for exfat_check_dir_empty() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. - All files and sub-directories under the directory are deleted.This commit adds checks to break the above infinite loop.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/amdkfd: Destroy KFD debugfs after destroy KFD wqSince KFD proc content was moved to kernel debugfs, we can't destroy KFDdebugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq priorto kfd_debugfs_fini to fix a kernel NULL pointer problem. It happenswhen /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini butkfd_process_destroy_wq calls kfd_debugfs_remove_process. This line debugfs_remove_recursive(entry->proc_dentry);tries to remove /sys/kernel/debug/kfd/proc/
while/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernelNULL pointer.(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ACPI: APEI: send SIGBUS to current task if synchronous memory error not recoveredIf a synchronous error is detected as a result of user-space processtriggering a 2-bit uncorrected error, the CPU will take a synchronouserror exception such as Synchronous External Abort (SEA) on Arm64. Thekernel will queue a memory_failure() work which poisons the relatedpage, unmaps the page, and then sends a SIGBUS to the process, so thata system wide panic can be avoided.However, no memory_failure() work will be queued when abnormalsynchronous errors occur. These errors can include situations likeinvalid PA, unexpected severity, no memory failure config support,invalid GUID section, etc. In such a case, the user-space process willtrigger SEA again. This loop can potentially exceed the platformfirmware threshold or even trigger a kernel hard lockup, leading to asystem reboot.Fix it by performing a force kill if no memory_failure() work is queuedfor synchronous errors.[ rjw: Changelog edits ]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: fix validation of VF state in get resourcesVF state I40E_VF_STATE_ACTIVE is not the only state in whichVF is actually active so it should not be used to determineif a VF is allowed to obtain resources.Use I40E_VF_STATE_RESOURCES_LOADED that is set only ini40e_vc_get_vf_resources_msg() and cleared during reset.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nexthop: Forbid FDB status change while nexthop is in a groupThe kernel forbids the creation of non-FDB nexthop groups with FDBnexthops: # ip nexthop add id 1 via 192.0.2.1 fdb # ip nexthop add id 2 group 1 Error: Non FDB nexthop group cannot have fdb nexthops.And vice versa: # ip nexthop add id 3 via 192.0.2.2 dev dummy1 # ip nexthop add id 4 group 3 fdb Error: FDB nexthop group can only have fdb nexthops.However, as long as no routes are pointing to a non-FDB nexthop group,the kernel allows changing the type of a nexthop from FDB to non-FDB andvice versa: # ip nexthop add id 5 via 192.0.2.2 dev dummy1 # ip nexthop add id 6 group 5 # ip nexthop replace id 5 via 192.0.2.2 fdb # echo $? 0This configuration is invalid and can result in a NPD [1] since FDBnexthops are not associated with a nexthop device: # ip route add 198.51.100.1/32 nhid 6 # ping 198.51.100.1Fix by preventing nexthop FDB status change while the nexthop is in agroup: # ip nexthop add id 7 via 192.0.2.2 dev dummy1 # ip nexthop add id 8 group 7 # ip nexthop replace id 7 via 192.0.2.2 fdb Error: Cannot change nexthop FDB status while in a group.[1]BUG: kernel NULL pointer dereference, address: 00000000000003c0[...]Oops: Oops: 0000 [#1] SMPCPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014RIP: 0010:fib_lookup_good_nhc+0x1e/0x80[...]Call Trace: fib_table_lookup+0x541/0x650 ip_route_output_key_hash_rcu+0x2ea/0x970 ip_route_output_key_hash+0x55/0x80 __ip4_datagram_connect+0x250/0x330 udp_connect+0x2b/0x60 __sys_connect+0x9c/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0xa4/0x2a0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: dynevent: Add a missing lockdown check on dyneventSince dynamic_events interface on tracefs is compatible withkprobe_events and uprobe_events, it should also check the lockdownstatus and reject if it is set.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before releaseThe fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can beNULL even after EPF initialization. Then it is prudent to check thatthey have non-NULL values before releasing the channels. Add the checksin pci_epf_test_clean_dma_chan().Without the checks, NULL pointer dereferences happen and they can leadto a kernel panic in some cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Call trace: dma_release_channel+0x2c/0x120 (P) pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test] pci_epc_deinit_notify+0x74/0xc0 tegra_pcie_ep_pex_rst_irq+0x250/0x5d8 irq_thread_fn+0x34/0xb8 irq_thread+0x18c/0x2e8 kthread+0x14c/0x210 ret_from_fork+0x10/0x20[mani: trimmed the stack trace]
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:pid: Add a judgment for ns null in pid_nr_ns__task_pid_nr_ns ns = task_active_pid_ns(current); pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns); if (pid && ns->level <= pid->level) {Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.For example: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000 [0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000 pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : __task_pid_nr_ns+0x74/0xd0 lr : __task_pid_nr_ns+0x24/0xd0 sp : ffffffc08001bd10 x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001 x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31 x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0 x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000 x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800 x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001 x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449 x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0 Call trace: __task_pid_nr_ns+0x74/0xd0 ... __handle_irq_event_percpu+0xd4/0x284 handle_irq_event+0x48/0xb0 handle_fasteoi_irq+0x160/0x2d8 generic_handle_domain_irq+0x44/0x60 gic_handle_irq+0x4c/0x114 call_on_irq_stack+0x3c/0x74 do_interrupt_handler+0x4c/0x84 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c account_kernel_stack+0x60/0x144 exit_task_stack_account+0x1c/0x80 do_exit+0x7e4/0xaf8 ... get_signal+0x7bc/0x8d8 do_notify_resume+0x128/0x828 el0_svc+0x6c/0x70 el0t_64_sync_handler+0x68/0xbc el0t_64_sync+0x1a8/0x1ac Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower()The ethtool tsconfig Netlink path can trigger a null pointerdereference. A call chain such as: tsconfig_prepare_data() -> dev_get_hwtstamp_phylib() -> vlan_hwtstamp_get() -> generic_hwtstamp_get_lower() -> generic_hwtstamp_ioctl_lower()results in generic_hwtstamp_ioctl_lower() being called withkernel_cfg->ifr as NULL.The generic_hwtstamp_ioctl_lower() function does not expecta NULL ifr and dereferences it, leading to a system crash.Fix this by adding a NULL check for kernel_cfg->ifr ingeneric_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: act_connmark: initialize struct tc_ife to fix kernel leakIn tcf_connmark_dump(), the variable 'opt' was partially initialized using adesignatied initializer. While the padding bytes are reamineduninitialized. nla_put() copies the entire structure into anetlink message, these uninitialized bytes leaked to userspace.Initialize the structure with memset before assigning its fieldsto ensure all members and padding are cleared prior to beign copied.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommufd: Don't overflow during division for dirty trackingIf pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflowto 0 and this triggers divide by 0.In this case the index should just be 0, so reorganize things to divideby shift and avoid hitting any overflows.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Free special fields when update [lru_,]percpu_hash mapsAs [lru_,]percpu_hash maps support BPF_KPTR_{REF,PERCPU}, missingcalls to 'bpf_obj_free_fields()' in 'pcpu_copy_value()' could cause thememory referenced by BPF_KPTR_{REF,PERCPU} fields to be held until themap gets freed.Fix this by calling 'bpf_obj_free_fields()' after'copy_map_value[,_long]()' in 'pcpu_copy_value()'.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flagsWhen a filesystem is being automounted, it needs to preserve theuser-set superblock mount options, such as the "ro" flag.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: libsodium before ad3004e, in atypical use cases involving certain custom cryptography or untrusted data to crypto_core_ed25519_is_valid_point, mishandles checks for whether an elliptic curve point is valid because it sometimes allows points that aren't in the main cryptographic group.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libsodium23 > 0-0 (version in image is 1.0.18-150000.4.8.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:team: fix check for port enabled in team_queue_override_port_prio_changed()There has been a syzkaller bug reported recently with the followingtrace:list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122)------------[ cut here ]------------kernel BUG at lib/list_debug.c:59!Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTICPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full)Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014RIP: 0010:__list_del_entry_valid_or_report+0x13e/0x200 lib/list_debug.c:59Code: 48 c7 c7 e0 71 f0 8b e8 30 08 ef fc 90 0f 0b 48 89 ef e8 a5 02 55 fd 48 89 ea 48 89 de 48 c7 c7 40 72 f0 8b e8 13 08 ef fc 90 <0f> 0b 48 89 ef e8 88 02 55 fd 48 89 ea 48 b8 00 00 00 00 00 fc ffRSP: 0018:ffffc9000d49f370 EFLAGS: 00010286RAX: 000000000000004e RBX: ffff888058bea080 RCX: ffffc9002817d000RDX: 0000000000000000 RSI: ffffffff819becc6 RDI: 0000000000000005RBP: dead000000000122 R08: 0000000000000005 R09: 0000000000000000R10: 0000000080000000 R11: 0000000000000001 R12: ffff888039e9c230R13: ffff888058bea088 R14: ffff888058bea080 R15: ffff888055461480FS: 00007fbbcfe6f6c0(0000) GS:ffff8880d6d0a000(0000) knlGS:0000000000000000CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033CR2: 000000110c3afcb0 CR3: 00000000382c7000 CR4: 0000000000352ef0Call Trace: __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:223 [inline] list_del_rcu include/linux/rculist.h:178 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:826 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:821 [inline] team_queue_override_port_prio_changed drivers/net/team/team_core.c:883 [inline] team_priority_option_set+0x171/0x2f0 drivers/net/team/team_core.c:1534 team_option_set drivers/net/team/team_core.c:376 [inline] team_nl_options_set_doit+0x8ae/0xe60 drivers/net/team/team_core.c:2653 genl_family_rcv_msg_doit+0x209/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2630 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2684 __sys_sendmsg+0x16d/0x220 net/socket.c:2716 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7fThe problem is in this flow:1) Port is enabled, queue_id != 0, in qom_list2) Port gets disabled -> team_port_disable() -> team_queue_override_port_del() -> del (removed from list)3) Port is disabled, queue_id != 0, not in any list4) Priority changes -> team_queue_override_port_prio_changed() -> checks: port disabled && queue_id != 0 -> calls del - hits the BUG as it is removed alreadyTo fix this, change the check in team_queue_override_port_prio_changed()so it returns early if port is not enabled.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVEDsyzkaller found it could overflow math in the test infrastructure andcause a WARN_ON by corrupting the reserved interval tree. This onlyeffects test kernels with CONFIG_IOMMUFD_TEST.Validate the user input length in the test ioctl.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: Rubygems.org is the Ruby community's gem hosting service. A Gem publisher can cause a Remote DoS when publishing a Gem. This is due to how Ruby reads the Manifest of Gem files when using Gem::Specification.from_yaml. from_yaml makes use of SafeYAML.load which allows YAML aliases inside the YAML-based metadata of a gem. YAML aliases allow for Denial of Service attacks with so-called `YAML-bombs` (comparable to Billion laughs attacks). This was patched. There is is no action required by users. This issue is also tracked as GHSL-2024-001 and was discovered by the GitHub security lab.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 < 2.5.9-150700.24.3.1 (version in image is 2.5.9-150700.22.16).
-
Description: A malicious client acting as the receiver of an rsync file transfer can trigger an out of bounds read of a heap based buffer, via a negative array index. The malicious rsync client requires at least read access to the remote rsync module in order to trigger the issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- rsync < 3.2.7-150600.3.14.1 (version in image is 3.2.7-150600.3.11.1).
-
Description: When building nested elements using xml.dom.minidom methods such as appendChild() that have a dependency on _clear_id_cache() the algorithm is quadratic. Availability can be impacted when building excessively nested documents.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpython3_6m1_0 < 3.6.15-150300.10.103.1 (version in image is 3.6.15-150300.10.97.1).
-
Description: In sshd in OpenSSH before 10.0, the DisableForwarding directive does not adhere to the documentation stating that it disables X11 and agent forwarding.
Packages affected:
- sle-module-desktop-applications-release == 15.7 (version in image is 15.7-150700.28.1).
- openssh > 0-0 (version in image is 9.6p1-150600.6.29.2).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ice: fix Rx page leak on multi-buffer framesThe ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for eachbuffer in the current frame. This function was introduced as part ofhandling multi-buffer XDP support in the ice driver.It works by iterating over the buffers from first_desc up to 1 plus thetotal number of fragments in the frame, cached from before the XDP programwas executed.If the hardware posts a descriptor with a size of 0, the logic used inice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get addedas fragments in ice_add_xdp_frag. Since the buffer isn't counted as afragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don'tcall ice_put_rx_buf().Because we don't call ice_put_rx_buf(), we don't attempt to re-use thepage or free it. This leaves a stale page in the ring, as we don'tincrement next_to_alloc.The ice_reuse_rx_page() assumes that the next_to_alloc has been incrementedproperly, and that it always points to a buffer with a NULL page. Sincethis function doesn't check, it will happily recycle a page over the topof the next_to_alloc buffer, losing track of the old page.Note that this leak only occurs for multi-buffer frames. Theice_put_rx_mbuf() function always handles at least one buffer, so asingle-buffer frame will always get handled correctly. It is not clearprecisely why the hardware hands us descriptors with a size of 0 sometimes,but it happens somewhat regularly with "jumbo frames" used by 9K MTU.To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() onall buffers between first_desc and next_to_clean. Borrow the logic of asimilar function in i40e used for this same purpose. Use the same logicalso in ice_get_pgcnts().Instead of iterating over just the number of fragments, use a loop whichiterates until the current index reaches to the next_to_clean element justpast the current frame. Unlike i40e, the ice_put_rx_mbuf() function doescall ice_put_rx_buf() on the last buffer of the frame indicating the end ofpacket.For non-linear (multi-buffer) frames, we need to take care when adjustingthe pagecnt_bias. An XDP program might release fragments from the tail ofthe frame, in which case that fragment page is already released. Onlyupdate the pagecnt_bias for the first descriptor and fragments stillremaining post-XDP program. Take care to only access the shared info forfragmented buffers, as this avoids a significant cache miss.The xdp_xmit value only needs to be updated if an XDP program is run, andonly once per packet. Drop the xdp_xmit pointer argument fromice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() functiondirectly. This avoids needing to pass the argument and avoids an extrabit-wise OR for each buffer in the frame.Move the increment of the ntc local variable to ensure its updated *before*all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logicrequires the index of the element just after the current frame.Now that we use an index pointer in the ring to identify the packet, we nolonger need to track or cache the number of fragments in the rx_ring.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: Active Record connects classes to relational database tables. Prior to versions 7.1.5.2, 7.2.2.2, and 8.0.2.1, the ID passed to find or similar methods may be logged without escaping. If this is directly to the terminal it may include unescaped ANSI sequences. This issue has been patched in versions 7.1.5.2, 7.2.2.2, and 8.0.2.1.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-activerecord-5_1 > 0-0 (version in image is 5.1.4-150000.5.6.1).
-
Description: urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- python3-urllib3 > 0-0 (version in image is 1.25.10-150300.4.18.1).
-
Description: Bluetooth LE and BR/EDR Secure Connections pairing and Secure Simple Pairing using the Passkey entry protocol in Bluetooth Core Specifications 2.1 through 5.3 may permit an unauthenticated man-in-the-middle attacker to identify the Passkey used during pairing by reflection of a crafted public key with the same X coordinate as the offered public key and by reflection of the authentication evidence of the initiating device, potentially permitting this attacker to complete authenticated pairing with the responding device using the correct Passkey for the pairing session. This is a related issue to CVE-2020-26558.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ublk: fail to start device if queue setup is interruptedIn ublk_ctrl_start_dev(), if wait_for_completion_interruptible() isinterrupted by signal, queues aren't setup successfully yet, so wehave to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.Reported by German when working on qemu-storage-deamon which requiressingle thread ublk daemon.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5e: Harden uplink netdev access against device unbindThe function mlx5_uplink_netdev_get() gets the uplink netdevicepointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice canbe removed and its pointer cleared when unbound from the mlx5_core.ethdriver. This results in a NULL pointer, causing a kernel panic. BUG: unable to handle page fault for address: 0000000000001300 at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core] Call Trace: mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core] esw_offloads_enable+0x593/0x910 [mlx5_core] mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xd0 genl_family_rcv_msg_doit+0xe0/0x130 genl_rcv_msg+0x183/0x290 netlink_rcv_skb+0x4b/0xf0 genl_rcv+0x24/0x40 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 __sys_sendto+0x119/0x180 do_syscall_64+0x53/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53Ensure the pointer is valid before use by checking it for NULL. If itis valid, immediately call netdev_hold() to take a reference, andpreventing the netdevice from being freed while it is in use.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/vmwgfx: Fix a null-ptr access in the cursor snooperCheck that the resource which is converted to a surface exists beforetrying to use the cursor snooper on it.vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiersbecause some svga commands accept SVGA3D_INVALID_ID to mean "no surface",unfortunately functions that accept the actual surfaces as objects might(and in case of the cursor snooper, do not) be able to handle nullobjects. Make sure that we validate not only the identifier (via thevmw_cmd_res_check) but also check that the actual resource exists beforetrying to do something with it.Fixes unchecked null-ptr reference in the snooping code.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()If new_asoc->peer.adaptation_ind=0 and sctp_ulpevent_make_authkey=0and sctp_ulpevent_make_authkey() returns 0, then the variableai_ev remains zero and the zero will be dereferencedin the sctp_ulpevent_free() function.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: Fix invalid prog->stats access when update_effective_progs failsSyzkaller triggers an invalid memory access issue following faultinjection in update_effective_progs. The issue can be described asfollows:__cgroup_bpf_detach update_effective_progs compute_effective_progs bpf_prog_array_alloc <-- fault inject purge_effective_progs /* change to dummy_bpf_prog */ array->items[index] = &dummy_bpf_prog.prog---softirq start---__do_softirq ... __cgroup_bpf_run_filter_skb __bpf_prog_run_save_cb bpf_prog_run stats = this_cpu_ptr(prog->stats) /* invalid memory access */ flags = u64_stats_update_begin_irqsave(&stats->syncp)---softirq end--- static_branch_dec(&cgroup_bpf_enabled_key[atype])The reason is that fault injection caused update_effective_progs to failand then changed the original prog into dummy_bpf_prog.prog inpurge_effective_progs. Then a softirq came, and accessing the members ofdummy_bpf_prog.prog in the softirq triggers invalid mem access.To fix it, skip updating stats when stats is NULL.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: An out-of-bounds read vulnerability was found in Netfilter Connection Tracking (conntrack) in the Linux kernel. This flaw allows a remote user to disclose sensitive information via the DCCP protocol.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: When loading a plist file, the plistlib module reads data in size specified by the file itself, meaning a malicious file can cause OOM and DoS issues
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpython3_6m1_0 < 3.6.15-150300.10.103.1 (version in image is 3.6.15-150300.10.97.1).
-
Description: A vulnerability was found in GNU Binutils up to 2.44. It has been rated as critical. Affected by this issue is the function elf_gc_sweep of the file bfd/elflink.c of the component ld. The manipulation leads to memory corruption. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. Upgrading to version 2.45 is able to address this issue. It is recommended to upgrade the affected component.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability classified as critical has been found in GNU Binutils up to 2.44. This affects the function debug_type_samep of the file /binutils/debug.c of the component objdump. The manipulation leads to memory corruption. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: In libexpat through 2.7.3, a crafted file with an approximate size of 2 MiB can lead to dozens of seconds of processing time.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- expat > 0-0 (version in image is 2.7.1-150700.3.6.1).
-
Description: Unknown.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libgnutls30 < 3.8.3-150600.4.12.1 (version in image is 3.8.3-150600.4.9.1).
-
Description: A CSRF forgery vulnerability exists in rails < 5.2.5, rails < 6.0.4 that makes it possible for an attacker to, given a global CSRF token such as the one present in the authenticity_token meta tag, forge a per-form CSRF token.
Packages affected:
- sle-ha-release == 15.7 (version in image is 15.7-150700.28.1).
- ruby2.5-rubygem-rails-5_1 > 0-0 (version in image is 5.1.4-1.26).
-
Description: A flaw was found in glib. Missing validation of offset and count parameters in the g_buffered_input_stream_peek() function can lead to an integer overflow during length calculation. When specially crafted values are provided, this overflow results in an incorrect size being passed to memcpy(), triggering a buffer overflow. This can cause application crashes, leading to a Denial of Service (DoS).
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- glib2-tools > 0-0 (version in image is 2.78.6-150600.4.16.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: xhci: Fix isochronous Ring Underrun/Overrun event handlingThe TRB pointer of these events points at enqueue at the time of erroroccurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time weare handling the event, a new TD may be queued at this ring position.I can trigger this race by rising interrupt moderation to increase IRQhandling delay. Similar delay may occur naturally due to system load.If this ever happens after a Missed Service Error, missed TDs will beskipped and the new TD processed as if it matched the event. It couldbe given back prematurely, risking data loss or buffer UAF by the xHC.Don't complete TDs on xrun events and don't warn if queued TDs don'tmatch the event's TRB pointer, which can be NULL or a link/no-op TRB.Don't warn if there are no queued TDs at all.Now that it's safe, also handle xrun events if the skip flag is clear.This ensures completion of any TD stuck in 'error mid TD' state rightbefore the xrun event, which could happen if a driver submits a finitenumber of URBs to a buggy HC and then an error occurs on the last TD.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability has been found in GNU Binutils 2.43 and classified as problematic. Affected by this vulnerability is the function __sanitizer::internal_strlen of the file binutils/nm.c of the component nm. The manipulation of the argument const leads to buffer overflow. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Don't (re)check L1 intercepts when completing userspace I/OWhen completing emulation of instruction that generated a userspace exitfor I/O, don't recheck L1 intercepts as KVM has already finished thatphase of instruction execution, i.e. has already committed to allowing L2to perform I/O. If L1 (or host userspace) modifies the I/O permissionbitmaps during the exit to userspace, KVM will treat the access as beingintercepted despite already having emulated the I/O access.Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation.Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (theintended "recipient") can reach the code in question. gp_interception()'suse is mutually exclusive with is_guest_mode(), andcomplete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE withEMULTYPE_SKIP.The bad behavior was detected by a syzkaller program that toggles port I/Ointerception during the userspace I/O exit, ultimately resulting in a WARNon vcpu->arch.pio.count being non-zero due to KVM no completing emulationof the I/O instruction. WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm] Modules linked in: kvm_intel kvm irqbypass CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm] PKRU: 55555554 Call Trace: kvm_fast_pio+0xd6/0x1d0 [kvm] vmx_handle_exit+0x149/0x610 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm] kvm_vcpu_ioctl+0x244/0x8c0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0x5d/0xc60 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RTOn PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, thecurrent task can be preempted. Another task running on the same CPUmay then execute rt6_make_pcpu_route() and successfully install apcpu_rt entry. When the first task resumes execution, its cmpxchg()in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longerNULL, triggering the BUG_ON(prev). It's easy to reproduce it by addingmdelay() after rt6_get_pcpu_route().Using preempt_disable/enable is not appropriate here becauseip6_rt_pcpu_alloc() may sleep.Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT:free our allocation and return the existing pcpu_rt installed byanother task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RTkernels where such races should not occur.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:perf trace: Really free the evsel->priv areaIn 3cb4d5e00e037c70 ("perf trace: Free syscall tp fields inevsel->priv") it only was freeing if strcmp(evsel->tp_format->system,"syscalls") returned zero, while the corresponding initialization ofevsel->priv was being performed if it was _not_ zero, i.e. if the tpsystem wasn't 'syscalls'.Just stop looking for that and free it if evsel->priv was set, whichshould be equivalent.Also use the pre-existing evsel_trace__delete() function.This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]#With this we plug all leaks with "perf trace sleep 1".
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability was found in GNU elfutils 0.192. It has been declared as critical. Affected by this vulnerability is the function dump_data_section/print_string_section of the file readelf.c of the component eu-readelf. The manipulation of the argument z/x leads to buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is 73db9d2021cab9e23fd734b0a76a612d52a6f1db. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- elfutils < 0.185-150400.5.8.3 (version in image is 0.185-150400.5.3.1).
-
Description: A vulnerability has been found in GNU Binutils 2.43/2.44 and classified as problematic. Affected by this vulnerability is the function display_info of the file binutils/bucomm.c of the component objdump. The manipulation leads to memory leak. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The patch is named ba6ad3a18cb26b79e0e3b84c39f707535bbc344d. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ptp: Add a upper bound on max_vclockssyzbot reported WARNING in max_vclocks_store.This occurs when the argument max is too large for kcalloc to handle.Extend the guard to guard against values that are too large forkcalloc
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:io_uring/zctx: check chained notif contextsSend zc only links ubuf_info for requests coming from the same context.There are some ambiguous syz reports, so let's check the assumption onnotification completion.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A flaw was identified in the RelaxNG parser of libxml2 related to how external schema inclusions are handled. The parser does not enforce a limit on inclusion depth when resolving nested directives. Specially crafted or overly complex schemas can cause excessive recursion during parsing. This may lead to stack exhaustion and application crashes, creating a denial-of-service risk.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libxml2-2 > 0-0 (version in image is 2.12.10-150700.4.6.1).
-
Description: A flaw was found in the libxml2 library. This uncontrolled resource consumption vulnerability occurs when processing XML catalogs that contain repeated elements pointing to the same downstream catalog. A remote attacker can exploit this by supplying crafted catalogs, causing the parser to redundantly traverse catalog chains. This leads to excessive CPU consumption and degrades application availability, resulting in a denial-of-service condition.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libxml2-2 > 0-0 (version in image is 2.12.10-150700.4.6.1).
-
Description: Endless recursion exists in xkbcomp/expr.c in xkbcommon and libxkbcommon before 0.8.1, which could be used by local attackers to crash xkbcommon users by supplying a crafted keymap file that triggers boolean negation.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- xkbcomp < 1.4.1-150000.3.6.1 (version in image is 1.4.1-150000.3.3.2).
-
Description: Unchecked NULL pointer usage when parsing invalid atoms in ExprResolveLhs in xkbcomp/expr.c in xkbcommon before 0.8.2 could be used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file, because lookup failures are mishandled.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- xkbcomp < 1.4.1-150000.3.6.1 (version in image is 1.4.1-150000.3.3.2).
-
Description: Unchecked NULL pointer usage in ExprResolveLhs in xkbcomp/expr.c in xkbcommon before 0.8.2 could be used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file that triggers an xkb_intern_atom failure.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- xkbcomp < 1.4.1-150000.3.6.1 (version in image is 1.4.1-150000.3.3.2).
-
Description: Unchecked NULL pointer usage in ResolveStateAndPredicate in xkbcomp/compat.c in xkbcommon before 0.8.2 could be used by local attackers to crash (NULL pointer dereference) the xkbcommon parser by supplying a crafted keymap file with a no-op modmask expression.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- xkbcomp < 1.4.1-150000.3.6.1 (version in image is 1.4.1-150000.3.3.2).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probeUse devm_of_iomap() instead of of_iomap() to automatically handlethe unused ioremap region.If any error occurs, regions allocated by kzalloc() will leak,but using devm_kzalloc() instead will automatically free the memoryusing devm_kfree().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:firmware: stratix10-svc: Fix a potential resource leak in svc_create_memory_pool()svc_create_memory_pool() is only called from stratix10_svc_drv_probe().Most of resources in the probe are managed, but not this memremap() call.There is also no memunmap() call in the file.So switch to devm_memremap() to avoid a resource leak.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probeUse devm_of_iomap() instead of of_iomap() to automaticallyhandle the unused ioremap region. If any error occurs, regions allocated bykzalloc() will leak, but using devm_kzalloc() instead will automaticallyfree the memory using devm_kfree().Also, fix error handling of hws by adding unregister_hws label, whichunregisters remaining hws when iomap failed.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:fbdev/ep93xx-fb: Do not assign to struct fb_info.devDo not assing the Linux device to struct fb_info.dev. The call toregister_framebuffer() initializes the field to the fbdev device.Drivers should not override its value.Fixes a bug where the driver incorrectly decreases the hardwaredevice's reference counter and leaks the fbdev device.v2: * add Fixes tag (Dan)
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:drm/msm/mdp5: Don't leak some plane stateApparently no one noticed that mdp5 plane states leak like a sieveever since we introduced plane_state->commit refcount a few years agoin 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state tooearly by tracking commits, v3.")Fix it by using the right helpers.Patchwork: https://patchwork.freedesktop.org/patch/551236/
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: tegra: tegra124-emc: Fix potential memory leakThe tegra and tegra needs to be freed in the error handling path, otherwiseit will be leaked.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net/mlx5: Unregister devlink params in case interface is downCurrently, in case an interface is down, mlx5 driver doesn'tunregister its devlink params, which leads to this WARN[1].Fix it by unregistering devlink params in that case as well.[1][ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc[ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61[ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023[ 295.543096 ] pc : devlink_free+0x174/0x1fc[ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core][ 295.561816 ] sp : ffff80000809b850[ 295.711155 ] Call trace:[ 295.716030 ] devlink_free+0x174/0x1fc[ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core][ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core][ 295.743534 ] auxiliary_bus_remove+0x2c/0x50[ 295.751893 ] __device_release_driver+0x19c/0x280[ 295.761120 ] device_release_driver+0x34/0x50[ 295.769649 ] bus_remove_device+0xdc/0x170[ 295.777656 ] device_del+0x17c/0x3a4[ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core][ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core][ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core][ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core][ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core][ 295.833439 ] pci_device_shutdown+0x3c/0xa0[ 295.841651 ] device_shutdown+0x170/0x340[ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0[ 295.857322 ] __arm64_sys_reboot+0x2c/0x40[ 295.865329 ] invoke_syscall+0x78/0x100[ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184[ 295.882392 ] do_el0_svc+0x30/0xac[ 295.889008 ] el0_svc+0x48/0x160[ 295.895278 ] el0t_64_sync_handler+0xa4/0x130[ 295.903807 ] el0t_64_sync+0x1a4/0x1a8[ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:PM / devfreq: Fix leak in devfreq_dev_release()srcu_init_notifier_head() allocates resources that need to be releasedwith a srcu_cleanup_notifier_head() call.Reported by kmemleak.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request()The memory allocated in tb_queue_dp_bandwidth_request() needs to bereleased once the request is handled to avoid leaking it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:accel/qaic: Fix a leak in map_user_pages()If get_user_pages_fast() allocates some pages but not as many as wewanted, then the current code leaks those pages. Call put_page() onthe pages before returning.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nvme-core: fix dev_pm_qos memleakCall dev_pm_qos_hide_latency_tolerance() in the error unwind patch toavoid following kmemleak:-blktests (master) # kmemleak-clear; ./check nvme/044;blktests (master) # kmemleak-scan ; kmemleak-shownvme/044 (Test bi-directional authentication) [passed] runtime 2.111s ... 2.124sunreferenced object 0xffff888110c46240 (size 96): comm "nvme", pid 33461, jiffies 4345365353 (age 75.586s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000069ac2cec>] kmalloc_trace+0x25/0x90 [<000000006acc66d5>] dev_pm_qos_update_user_latency_tolerance+0x6f/0x100 [<00000000cc376ea7>] nvme_init_ctrl+0x38e/0x410 [nvme_core] [<000000007df61b4b>] 0xffffffffc05e88b3 [<00000000d152b985>] 0xffffffffc05744cb [<00000000f04a4041>] vfs_write+0xc5/0x3c0 [<00000000f9491baf>] ksys_write+0x5f/0xe0 [<000000001c46513d>] do_syscall_64+0x3b/0x90 [<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: Fix memory leak in devm_clk_notifier_register()devm_clk_notifier_register() allocates a devres resource for clknotifier but didn't register that to the device, so the notifier didn'tget unregistered on device detach and the allocated resource was leaked.Fix the issue by registering the resource through devres_add().This issue was found with kmemleak on a Chromebook.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clkWhen the best clk is searched, we iterate over all possible clk.If we find a better match, the previous one, if any, needs to be freed.If a better match has already been found, we still need to free the newone, otherwise it leaks.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()Replace of_iomap() and kzalloc() with devm_of_iomap() and devm_kzalloc()which can automatically release the related memory when the deviceor driver is removed or unloaded to avoid potential memory leak.In this case, iounmap(anatop_base) in line 427,433 are removedas manual release is not required.Besides, referring to clk-imx8mq.c, check the return code ofof_clk_add_hw_provider, if it returns negtive, print error infoand unregister hws, which makes the program more robust.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objectsIf a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`objects while evaluating the AMD LPS0 _DSM, there will be a memoryleak. Explicitly guard against this.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probeSmatch reports:drivers/clocksource/timer-cadence-ttc.c:529 ttc_timer_probe()warn: 'timer_baseaddr' from of_iomap() not released on lines: 498,508,516.timer_baseaddr may have the problem of not being released after use,I replaced it with the devm_of_iomap() function and added the clk_put()function to cleanup the "clk_ce" and "clk_cs".
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knodeWhen u32_replace_hw_knode fails, we need to undo the tcf_bind_filteroperation done at u32_set_parms.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In netstat in BusyBox through 1.37.0, local users can launch of network application with an argv[0] containing an ANSI terminal escape sequence, leading to a denial of service (terminal locked up) when netstat is used by a victim.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- iproute2 > 0-0 (version in image is 6.4-150600.7.9.1).
-
Description: A vulnerability was found in GNU Binutils 2.45. Impacted is the function _bfd_x86_elf_late_size_sections of the file bfd/elfxx-x86.c of the component Linker. The manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is identified as b6ac5a8a5b82f0ae6a4642c8d7149b325f4cc60a. A patch should be applied to remediate this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability was determined in GNU Binutils 2.45. The affected element is the function elf_x86_64_relocate_section of the file elf64-x86-64.c of the component Linker. This manipulation causes heap-based buffer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. Patch name: 6b21c8b2ecfef5c95142cbc2c32f185cb1c26ab0. To fix this issue, it is recommended to deploy a patch.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A security flaw has been discovered in GNU Binutils 2.45. Impacted is the function tg_tag_type of the file prdbg.c. Performing manipulation results in unchecked return value. The attack needs to be approached locally. The exploit has been released to the public and may be exploited.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils > 0-0 (version in image is 2.43-150100.7.52.1).
-
Description: A weakness has been identified in GNU Binutils 2.45. The affected element is the function vfinfo of the file ldmisc.c. Executing manipulation can lead to out-of-bounds read. The attack can only be executed locally. The exploit has been made available to the public and could be exploited. This patch is called 16357. It is best practice to apply a patch to resolve this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils > 0-0 (version in image is 2.43-150100.7.52.1).
-
Description: pcap_ether_aton() is an auxiliary function in libpcap, it takes a string argument and returns a fixed-size allocated buffer. The string argument must be a well-formed MAC-48 address in one of the supported formats, but this requirement has been poorly documented. If an application calls the function with an argument that deviates from the expected format, the function can read data beyond the end of the provided string and write data beyond the end of the allocated buffer.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libpcap1 < 1.10.5-150700.3.7.1 (version in image is 1.10.5-150700.1.8).
-
Description: In the Linux kernel, the following vulnerability has been resolved:efivarfs: Fix memory leak of efivarfs_fs_info in fs_context error pathsWhen processing mount options, efivarfs allocates efivarfs_fs_info (sfi)early in fs_context initialization. However, sfi is associated with thesuperblock and typically freed when the superblock is destroyed. If thefs_context is released (final put) before fill_super is called-such ason error paths or during reconfiguration-the sfi structure would leak,as ownership never transfers to the superblock.Implement the .free callback in efivarfs_context_ops to ensure anyallocated sfi is properly freed if the fs_context is torn down beforefill_super, preventing this memory leak.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:wifi: mac80211: increase scan_ies_len for S1GCurrently the S1G capability element is not taken into accountfor the scan_ies_len, which leads to a buffer length validationfailure in ieee80211_prep_hw_scan() and subsequent WARN in__ieee80211_start_scan(). This prevents hw scanning from functioning.To fix ensure we accommodate for the S1G capability length.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:i40e: add max boundary check for VF filtersThere is no check for max filters that VF can request. Add it.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_IDPer UVC 1.1+ specification 3.7.2, units and terminals must have a non-zerounique ID.```Each Unit and Terminal within the video function is assigned a uniqueidentification number, the Unit ID (UID) or Terminal ID (TID), contained inthe bUnitID or bTerminalID field of the descriptor. The value 0x00 isreserved for undefined ID,```If we add a new entity with id 0 or a duplicated ID, it will be markedas UVC_INVALID_ENTITY_ID.In a previous attempt commit 3dd075fe8ebb ("media: uvcvideo: Requireentities to have a non-zero unique ID"), we ignored all the invalid units,this broke a lot of non-compatible cameras. Hopefully we are more luckythis time.This also prevents some syzkaller reproducers from triggering warnings dueto a chain of entities referring to themselves. In one particular case, anOutput Unit is connected to an Input Unit, both with the same ID of 1. Butwhen looking up for the source ID of the Output Unit, that same entity isfound instead of the input entity, which leads to such warnings.In another case, a backward chain was considered finished as the source IDwas 0. Later on, that entity was found, but its pads were not valid.Here is a sample stack trace for one of those cases.[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd[ 20.830206] usb 1-1: Using ep0 maxpacket: 8[ 20.833501] usb 1-1: config 0 descriptor??[ 21.038518] usb 1-1: string descriptor 0 read error: -71[ 21.038893] usb 1-1: Found UVC 0.00 device (2833:0201)[ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized![ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized![ 21.042218] ------------[ cut here ]------------[ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0[ 21.043195] Modules linked in:[ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444[ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014[ 21.044639] Workqueue: usb_hub_wq hub_event[ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0[ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00[ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246[ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1[ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290[ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000[ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003[ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000[ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000[ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033[ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0[ 21.051136] PKRU: 55555554[ 21.051331] Call Trace:[ 21.051480] [ 21.051611] ? __warn+0xc4/0x210[ 21.051861] ? media_create_pad_link+0x2c4/0x2e0[ 21.052252] ? report_bug+0x11b/0x1a0[ 21.052540] ? trace_hardirqs_on+0x31/0x40[ 21.052901] ? handle_bug+0x3d/0x70[ 21.053197] ? exc_invalid_op+0x1a/0x50[ 21.053511] ? asm_exc_invalid_op+0x1a/0x20[ 21.053924] ? media_create_pad_link+0x91/0x2e0[ 21.054364] ? media_create_pad_link+0x2c4/0x2e0[ 21.054834] ? media_create_pad_link+0x91/0x2e0[ 21.055131] ? _raw_spin_unlock+0x1e/0x40[ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210[ 21.055837] uvc_mc_register_entities+0x358/0x400[ 21.056144] uvc_register_chains+0x1---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:smb: client: Fix refcount leak for cifs_sb_tlinkFix three refcount inconsistency issues related to `cifs_sb_tlink`.Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to becalled after successful calls to `cifs_sb_tlink()`. Three calls fail toupdate refcount accordingly, leading to possible resource leaks.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:vfs: Don't leak disconnected dentries on umountWhen user calls open_by_handle_at() on some inode that is not cached, wewill create disconnected dentry for it. If such dentry is a directory,exportfs_decode_fh_raw() will then try to connect this dentry to thedentry tree through reconnect_path(). It may happen for various reasons(such as corrupted fs or race with rename) that the call tolookup_one_unlocked() in reconnect_one() will fail to find the dentry weare trying to reconnect and instead create a new dentry under theparent. Now this dentry will not be marked as disconnected although theparent still may well be disconnected (at least in case thisinconsistency happened because the fs is corrupted and .. doesn't pointto the real parent directory). This creates inconsistency indisconnected flags but AFAICS it was mostly harmless. At least untilcommit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon")which removed adding of most disconnected dentries to sb->s_anon list.Thus after this commit cleanup of disconnected dentries implicitelyrelies on the fact that dput() will immediately reclaim such dentries.However when some leaf dentry isn't marked as disconnected, as in thescenario described above, the reclaim doesn't happen and the dentriesare "leaked". Memory reclaim can eventually reclaim them but otherwisethey stay in memory and if umount comes first, we hit infamous "Busyinodes after unmount" bug. Make sure all dentries created under adisconnected parent are marked as disconnected as well.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicastsyzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb.This is the sequence of events that leads to the warning:rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb);}rtl8150_set_multicast() { netif_stop_queue(); netif_wake_queue(); <-- wakes up TX queue before URB is done}rtl8150_start_xmit() { netif_stop_queue(); usb_submit_urb(dev->tx_urb); <-- double submission}rtl8150_set_multicast being the ndo_set_rx_mode callback should not becalling netif_stop_queue and notif_start_queue as these handleTX queue synchronization.The net core function dev_set_rx_mode handles the synchronizationfor rtl8150_set_multicast making it safe to remove these locks.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.25.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm: hugetlb: avoid soft lockup when mprotect to large memory areaWhen calling mprotect() to a large hugetlb memory area in our customer'sworkload (~300GB hugetlb memory), soft lockup was observed:watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916]CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)pc : mte_clear_page_tags+0x14/0x24lr : mte_sync_tags+0x1c0/0x240sp : ffff80003150bb80x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2cx8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8Soft lockup is not triggered with THP or base page because there iscond_resched() called for each PMD size.Although the soft lockup was triggered by MTE, it should be not MTEspecific. The other processing which takes long time in the loop maytrigger soft lockup too.So add cond_resched() for hugetlb to avoid soft lockup.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xen/events: Return -EEXIST for bound VIRQsChange find_virq() to return -EEXIST when a VIRQ is bound to adifferent CPU than the one passed in. With that, remove the BUG_ON()from bind_virq_to_irq() to propogate the error upwards.Some VIRQs are per-cpu, but others are per-domain or global. Those mustbe bound to CPU0 and can then migrate elsewhere. The lookup forper-domain and global will probably fail when migrated off CPU 0,especially when the current CPU is tracked. This now returns -EEXISTinstead of BUG_ON().A second call to bind a per-domain or global VIRQ is not expected, butmake it non-fatal to avoid trying to look up the irq, since we don'tknow which per_cpu(virq_to_irq) it will be in.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: usb: asix: validate PHY address before useThe ASIX driver reads the PHY address from the USB device viaasix_read_phy_addr(). A malicious or faulty device can return aninvalid address (>= PHY_MAX_ADDR), which causes a warning inmdiobus_get_phy(): addr 207 out of range WARNING: drivers/net/phy/mdio_bus.c:76Validate the PHY address in asix_read_phy_addr() and remove thenow-redundant check in ax88172a.c.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tracing: Do not register unsupported perf eventsSynthetic events currently do not have a function to register perf events.This leads to calling the tracepoint register functions with a NULLfunction pointer which triggers: ------------[ cut here ]------------ WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:tracepoint_add_func+0x357/0x370 Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000 RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8 RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780 R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78 FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0 Call Trace: tracepoint_probe_register+0x5d/0x90 synth_event_reg+0x3c/0x60 perf_trace_event_init+0x204/0x340 perf_trace_init+0x85/0xd0 perf_tp_event_init+0x2e/0x50 perf_try_init_event+0x6f/0x230 ? perf_event_alloc+0x4bb/0xdc0 perf_event_alloc+0x65a/0xdc0 __se_sys_perf_event_open+0x290/0x9f0 do_syscall_64+0x93/0x7b0 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? trace_hardirqs_off+0x53/0xc0 entry_SYSCALL_64_after_hwframe+0x76/0x7eInstead, have the code return -ENODEV, which doesn't warn and has perferror out with: # perf record -e synthetic:futex_waitError:The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait)."dmesg | grep -i perf" may provide additional information.Ideally perf should support synthetic events, but for now just fix thewarning. The support can come later.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability has been found in GNU Binutils 2.44 and classified as problematic. This vulnerability affects the function bfd_elf_get_str_section of the file bfd/elf.c of the component BFD Library. The manipulation leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The name of the patch is db856d41004301b3a56438efd957ef5cabb91530. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability was found in GNU Binutils 2.44 and classified as problematic. This issue affects the function process_debug_info of the file binutils/dwarf.c of the component DWARF Section Handler. The manipulation leads to memory leak. Attacking locally is a requirement. The identifier of the patch is e51fdff7d2e538c0e5accdd65649ac68e6e0ddd4. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: The 'zipfile' module would not check the validity of the ZIP64 End ofCentral Directory (EOCD) Locator record offset value would not be used tolocate the ZIP64 EOCD record, instead the ZIP64 EOCD record would beassumed to be the previous record in the ZIP archive. This could be abusedto create ZIP archives that are handled differently by the 'zipfile' modulecompared to other ZIP implementations.Remediation maintains this behavior, but checks that the offset specifiedin the ZIP64 EOCD Locator record matches the expected value.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311 < 3.11.14-150600.3.38.1 (version in image is 3.11.13-150600.3.35.2).
-
Description: A vulnerability was found in libxml2 up to 2.14.5. It has been declared as problematic. This vulnerability affects the function xmlParseSGMLCatalog of the component xmlcatalog. The manipulation leads to uncontrolled recursion. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The code maintainer explains, that "[t]he issue can only be triggered with untrusted SGML catalogs and it makes absolutely no sense to use untrusted catalogs. I also doubt that anyone is still using SGML catalogs at all."
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- gettext-runtime > 0-0 (version in image is 0.21.1-150600.3.3.2).
-
Description: When doing SSH-based transfers using either SCP or SFTP, and asked to dopublic key authentication, curl would wrongly still ask and authenticate usinga locally running SSH agent.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- curl < 8.14.1-150700.7.8.1 (version in image is 8.14.1-150700.7.2.1).
-
Description: REXML is an XML toolkit for Ruby. The REXML gems from 3.3.3 to 3.4.1 has a DoS vulnerability when parsing XML containing multiple XML declarations. If you need to parse untrusted XMLs, you may be impacted to these vulnerabilities. The REXML gem 3.4.2 or later include the patches to fix these vulnerabilities.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libruby2_5-2_5 > 0-0 (version in image is 2.5.9-150700.22.16).
-
Description: In the Linux kernel, the following vulnerability has been resolved:igb: Fix igb_down hung on surprise removalIn a setup where a Thunderbolt hub connects to Ethernet and a displaythrough USB Type-C, users may experience a hung task timeout when theyremove the cable between the PC and the Thunderbolt hub.This is because the igb_down function is called multiple times whenthe Thunderbolt hub is unplugged. For example, the igb_io_error_detectedtriggers the first call, and the igb_remove triggers the second call.The second call to igb_down will block at napi_synchronize.Here's the call trace: __schedule+0x3b0/0xddb ? __mod_timer+0x164/0x5d3 schedule+0x44/0xa8 schedule_timeout+0xb2/0x2a4 ? run_local_timers+0x4e/0x4e msleep+0x31/0x38 igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4] __igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4] igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4] __dev_close_many+0x95/0xec dev_close_many+0x6e/0x103 unregister_netdevice_many+0x105/0x5b1 unregister_netdevice_queue+0xc2/0x10d unregister_netdev+0x1c/0x23 igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4] pci_device_remove+0x3f/0x9c device_release_driver_internal+0xfe/0x1b4 pci_stop_bus_device+0x5b/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_bus_device+0x30/0x7f pci_stop_and_remove_bus_device+0x12/0x19 pciehp_unconfigure_device+0x76/0xe9 pciehp_disable_slot+0x6e/0x131 pciehp_handle_presence_or_link_change+0x7a/0x3f7 pciehp_ist+0xbe/0x194 irq_thread_fn+0x22/0x4d ? irq_thread+0x1fd/0x1fd irq_thread+0x17b/0x1fd ? irq_forced_thread_fn+0x5f/0x5f kthread+0x142/0x153 ? __irq_get_irqchip_state+0x46/0x46 ? kthread_associate_blkcg+0x71/0x71 ret_from_fork+0x1f/0x30In this case, igb_io_error_detected detaches the network interfaceand requests a PCIE slot reset, however, the PCIE reset callback isnot being invoked and thus the Ethernet connection breaks down.As the PCIE error in this case is a non-fatal one, requesting aslot reset can be avoided.This patch fixes the task hung issue and preserves Ethernetconnection by ignoring non-fatal PCIE errors.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: An issue was discovered in function d_unqualified_name in file cp-demangle.c in BinUtils 2.26 allowing attackers to cause a denial of service via crafted PE file.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils > 0-0 (version in image is 2.43-150100.7.52.1).
-
Description: An issue was discovered in function d_discriminator in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils > 0-0 (version in image is 2.43-150100.7.52.1).
-
Description: An issue was discovered in function d_abi_tags in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils > 0-0 (version in image is 2.43-150100.7.52.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:xsk: fix refcount underflow in error pathFix a refcount underflow problem reported by syzbot that can happenwhen a system is running out of memory. If xp_alloc_tx_descs() fails,and it can only fail due to not having enough memory, then the errorpath is triggered. In this error path, the refcount of the pool isdecremented as it has incremented before. However, the reference tothe pool in the socket was not nulled. This means that when the socketis closed later, the socket teardown logic will think that there is apool attached to the socket and try to decrease the refcount again,leading to a refcount underflow.I chose this fix as it involved adding just a single line. Anotheroption would have been to move xp_get_pool() and the assignment ofxs->pool to after the if-statement and using xs_umem->pool instead ofxs->pool in the whole if-statement resulting in somewhat simpler code,but this would have led to much more churn in the code base perhapsmaking it harder to backport.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:tls: separate no-async decryption request handling from asyncIf we're not doing async, the handling is much simpler. There's noreference counting, we just need to wait for the completion to wake usup and return its result.We should preferably also use a separate crypto_wait. I'm not seeing aUAF as I did in the past, I think aec7961916f3 ("tls: fix race betweenasync notify and socket close") took care of it.This will make the next fix easier.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability was found in GNU Binutils 2.43. It has been declared as problematic. This vulnerability affects the function bfd_malloc of the file libbfd.c of the component ld. The manipulation leads to memory leak. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability has been found in GNU elfutils 0.192 and classified as critical. This vulnerability affects the function __libdw_thread_tail in the library libdw_alloc.c of the component eu-readelf. The manipulation of the argument w leads to memory corruption. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The name of the patch is 2636426a091bd6c6f7f02e49ab20d4cdc6bfc753. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- elfutils < 0.185-150400.5.8.3 (version in image is 0.185-150400.5.3.1).
-
Description: A vulnerability classified as problematic was found in GNU elfutils 0.192. This vulnerability affects the function elf_strptr in the library /libelf/elf_strptr.c of the component eu-strip. The manipulation leads to denial of service. It is possible to launch the attack on the local host. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The name of the patch is b16f441cca0a4841050e3215a9f120a6d8aea918. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- elfutils < 0.185-150400.5.8.3 (version in image is 0.185-150400.5.3.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()A soft lockup warning was observed on a relative small system x86-64system with 16 GB of memory when running a debug kernel with kmemleakenabled. watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]The test system was running a workload with hot unplug happening inparallel. Then kemleak decided to disable itself due to its inability toallocate more kmemleak objects. The debug kernel has itsCONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.The soft lockup happened in kmemleak_do_cleanup() when the existingkmemleak objects were being removed and deleted one-by-one in a loop via aworkqueue. In this particular case, there are at least 40,000 objectsthat need to be processed and given the slowness of a debug kernel and thefact that a raw_spinlock has to be acquired and released in__delete_object(), it could take a while to properly handle all theseobjects.As kmemleak has been disabled in this case, the object removal anddeletion process can be further optimized as locking isn't really needed. However, it is probably not worth the effort to optimize for such an edgecase that should rarely happen. So the simple solution is to callcond_resched() at periodic interval in the iteration loop to avoid softlockup.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:net: ipv6: fix field-spanning memcpy warning in AH outputFix field-spanning memcpy warnings in ah6_output() andah6_output_done() where extension headers are copied to/from IPv6address fields, triggering fortify-string warnings about writes beyondthe 16-byte address fields. memcpy: detected field-spanning write (size 40) of single field "&top_iph->saddr" at net/ipv6/ah6.c:439 (size 16) WARNING: CPU: 0 PID: 8838 at net/ipv6/ah6.c:439 ah6_output+0xe7e/0x14e0 net/ipv6/ah6.c:439The warnings are false positives as the extension headers areintentionally placed after the IPv6 header in memory. Fix by properlycopying addresses and extension headers separately, and introducehelper functions to avoid code duplication.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: If the value passed to os.path.expandvars() is user-controlled a performance degradation is possible when expanding environment variables.
Packages affected:
- SLES_SAP-release == 15.7 (version in image is 15.7-150700.28.1).
- python311 < 3.11.14-150600.3.38.1 (version in image is 3.11.13-150600.3.35.2).
-
Description: An issue was discovered in function d_print_comp_inner in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils > 0-0 (version in image is 2.43-150100.7.52.1).
-
Description: An issue was discovered in function d_print_comp_inner in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils > 0-0 (version in image is 2.43-150100.7.52.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:RDMA/cm: Fix leaking the multicast GID table referenceIf the CM ID is destroyed while the CM event for multicast creating isstill queued the cancel_work_sync() will prevent the work from runningwhich also prevents destroying the ah_attr. This leaks a refcount andtriggers a WARN: GID entry ref leak for dev syz1 index 2 ref=573 WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline] WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886Destroy the ah_attr after canceling the work, it is safe to call thistwice.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:bpf: reject unhashed sockets in bpf_sk_assignThe semantics for bpf_sk_assign are as follows: sk = some_lookup_func() bpf_sk_assign(skb, sk) bpf_sk_release(sk)That is, the sk is not consumed by bpf_sk_assign. The functiontherefore needs to make sure that sk lives long enough to beconsumed from __inet_lookup_skb. The path through the stack for aTCPv4 packet is roughly: netif_receive_skb_core: takes RCU read lock __netif_receive_skb_core: sch_handle_ingress: tcf_classify: bpf_sk_assign() deliver_ptype_list_skb: deliver_skb: ip_packet_type->func == ip_rcv: ip_rcv_core: ip_rcv_finish_core: dst_input: ip_local_deliver: ip_local_deliver_finish: ip_protocol_deliver_rcu: tcp_v4_rcv: __inet_lookup_skb: skb_steal_sockThe existing helper takes advantage of the fact that everythinghappens in the same RCU critical section: for sockets withSOCK_RCU_FREE set bpf_sk_assign never takes a reference.skb_steal_sock then checks SOCK_RCU_FREE again and does sock_putif necessary.This approach assumes that SOCK_RCU_FREE is never set on a skbetween bpf_sk_assign and skb_steal_sock, but this invariant isviolated by unhashed UDP sockets. A new UDP socket is createdin TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is onlyadded in udp_lib_get_port() which happens when a socket is bound.When bpf_sk_assign was added it wasn't possible to access unhashedUDP sockets from BPF, so this wasn't a problem. This changedin commit 0c48eefae712 ("sock_map: Lift socket state restrictionfor datagram sockets"), but the helper wasn't adjusted accordingly.The following sequence of events will therefore lead to a refcountleak:1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap.2. Pull socket out of sockmap and bpf_sk_assign it. Since SOCK_RCU_FREE is not set we increment the refcount.3. bind() or connect() the socket, setting SOCK_RCU_FREE.4. skb_steal_sock will now set refcounted = false due to SOCK_RCU_FREE.5. tcp_v4_rcv() skips sock_put().Fix the problem by rejecting unhashed sockets in bpf_sk_assign().This matches the behaviour of __inet_lookup_skb which is ultimatelythe goal of bpf_sk_assign().
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function'unregister_nvdimm_pmu'.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:sched/fair: Don't balance task to its current running CPUWe've run into the case that the balancer tries to balance a migrationdisabled task and trigger the warning in set_task_cpu() like below: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240 Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip> CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021 pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : set_task_cpu+0x188/0x240 lr : load_balance+0x5d0/0xc60 sp : ffff80000803bc70 x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040 x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001 x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78 x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000 x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000 x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530 x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001 Call trace: set_task_cpu+0x188/0x240 load_balance+0x5d0/0xc60 rebalance_domains+0x26c/0x380 _nohz_idle_balance.isra.0+0x1e0/0x370 run_rebalance_domains+0x6c/0x80 __do_softirq+0x128/0x3d8 ____do_softirq+0x18/0x24 call_on_irq_stack+0x2c/0x38 do_softirq_own_stack+0x24/0x3c __irq_exit_rcu+0xcc/0xf4 irq_exit_rcu+0x18/0x24 el1_interrupt+0x4c/0xe4 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x74/0x78 arch_cpu_idle+0x18/0x4c default_idle_call+0x58/0x194 do_idle+0x244/0x2b0 cpu_startup_entry+0x30/0x3c secondary_start_kernel+0x14c/0x190 __secondary_switched+0xb0/0xb4 ---[ end trace 0000000000000000 ]---Further investigation shows that the warning is superfluous, the migrationdisabled task is just going to be migrated to its current running CPU.This is because that on load balance if the dst_cpu is not allowed by thetask, we'll re-select a new_dst_cpu as a candidate. If no task can bebalanced to dst_cpu we'll try to balance the task to the new_dst_cpuinstead. In this case when the migration disabled task is not on CPU itonly allows to run on its current CPU, load balance will select itscurrent CPU as new_dst_cpu and later triggers the warning above.The new_dst_cpu is chosen from the env->dst_grpmask. Currently itcontains CPUs in sched_group_span() and if we have overlapped groups it'spossible to run into this case. This patch makes env->dst_grpmask ofgroup_balance_mask() which exclude any CPUs from the busiest group andsolve the issue. For balancing in a domain with no overlapped groupsthe behaviour keeps same as before.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profileCallers of `btrfs_reduce_alloc_profile` expect it to return exactlyone allocation profile flag, and failing to do so may ultimatelyresult in a WARN_ON and remount-ro when allocating new blocks, likethe below transaction abort on 6.1.`btrfs_reduce_alloc_profile` has two ways of determining the profile,first it checks if a conversion balance is currently running anduses the profile we're converting to. If no balance is currentlyrunning, it returns the max-redundancy profile which at least oneblock in the selected block group has.This works by simply checking each known allocation profile bit inredundancy order. However, `btrfs_reduce_alloc_profile` has not beenupdated as new flags have been added - first with the `DUP` profileand later with the RAID1C34 profiles.Because of the way it checks, if we have blocks with differentprofiles and at least one is known, that profile will be selected.However, if none are known we may return a flag set with multipleallocation profiles set.This is currently only possible when a balance from one of the threeunhandled profiles to another of the unhandled profiles is canceledafter allocating at least one block using the new profile.In that case, a transaction abort like the below will occur and thefilesystem will need to be mounted with -o skip_balance to get itmounted rw again (but the balance cannot be resumed without asimilar abort). [770.648] ------------[ cut here ]------------ [770.648] BTRFS: Transaction aborted (error -22) [770.648] WARNING: CPU: 43 PID: 1159593 at fs/btrfs/extent-tree.c:4122 find_free_extent+0x1d94/0x1e00 [btrfs] [770.648] CPU: 43 PID: 1159593 Comm: btrfs Tainted: G W 6.1.0-0.deb11.7-powerpc64le #1 Debian 6.1.20-2~bpo11+1a~test [770.648] Hardware name: T2P9D01 REV 1.00 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [770.648] NIP: c00800000f6784fc LR: c00800000f6784f8 CTR: c000000000d746c0 [770.648] REGS: c000200089afe9a0 TRAP: 0700 Tainted: G W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test) [770.648] MSR: 9000000002029033 CR: 28848282 XER: 20040000 [770.648] CFAR: c000000000135110 IRQMASK: 0 GPR00: c00800000f6784f8 c000200089afec40 c00800000f7ea800 0000000000000026 GPR04: 00000001004820c2 c000200089afea00 c000200089afe9f8 0000000000000027 GPR08: c000200ffbfe7f98 c000000002127f90 ffffffffffffffd8 0000000026d6a6e8 GPR12: 0000000028848282 c000200fff7f3800 5deadbeef0000122 c00000002269d000 GPR16: c0002008c7797c40 c000200089afef17 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000001 c000200008bc5a98 0000000000000001 GPR24: 0000000000000000 c0000003c73088d0 c000200089afef17 c000000016d3a800 GPR28: c0000003c7308800 c00000002269d000 ffffffffffffffea 0000000000000001 [770.648] NIP [c00800000f6784fc] find_free_extent+0x1d94/0x1e00 [btrfs] [770.648] LR [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] [770.648] Call Trace: [770.648] [c000200089afec40] [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] (unreliable) [770.648] [c000200089afed30] [c00800000f681398] btrfs_reserve_extent+0x1a0/0x2f0 [btrfs] [770.648] [c000200089afeea0] [c00800000f681bf0] btrfs_alloc_tree_block+0x108/0x670 [btrfs] [770.648] [c000200089afeff0] [c00800000f66bd68] __btrfs_cow_block+0x170/0x850 [btrfs] [770.648] [c000200089aff100] [c00800000f66c58c] btrfs_cow_block+0x144/0x288 [btrfs] [770.648] [c000200089aff1b0] [c00800000f67113c] btrfs_search_slot+0x6b4/0xcb0 [btrfs] [770.648] [c000200089aff2a0] [c00800000f679f60] lookup_inline_extent_backref+0x128/0x7c0 [btrfs] [770.648] [c000200089aff3b0] [c00800000f67b338] lookup_extent_backref+0x70/0x190 [btrfs] [770.648] [c000200089aff470] [c00800000f67b54c] __btrfs_free_extent+0xf4/0x1490 [btrfs] [770.648] [---truncated---
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: qla2xxx: Remove unused nvme_ls_waitq wait queueSystem crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_upgets called for uninitialized wait queue sp->nvme_ls_waitq. qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0 qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removedpreviously in the commits tagged Fixed: below.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:start_kernel: Add __no_stack_protector function attributeBack during the discussion ofcommit a9a3ed1eff36 ("x86: Fix early boot crash on gcc-10, third try")we discussed the need for a function attribute to control the omissionof stack protectors on a per-function basis; at the time Clang hadsupport for no_stack_protector but GCC did not. This was fixed ingcc-11. Now that the function attribute is available, let's start usingit.Callers of boot_init_stack_canary need to use this function attributeunless they're compiled with -fno-stack-protector, otherwise the canarystored in the stack slot of the caller will differ upon the call toboot_init_stack_canary. This will lead to a call to __stack_chk_fail()then panic.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:scsi: ufs: core: Fix handling of lrbp->cmdufshcd_queuecommand() may be called two times in a row for a SCSI commandbefore it is completed. Hence make the following changes: - In the functions that submit a command, do not check the old value of lrbp->cmd nor clear lrbp->cmd in error paths. - In ufshcd_release_scsi_cmd(), do not clear lrbp->cmd.See also scsi_send_eh_cmnd().This commit prevents that the following appears if a command times out:WARNING: at drivers/ufs/core/ufshcd.c:2965 ufshcd_queuecommand+0x6f8/0x9a8Call trace: ufshcd_queuecommand+0x6f8/0x9a8 scsi_send_eh_cmnd+0x2c0/0x960 scsi_eh_test_devices+0x100/0x314 scsi_eh_ready_devs+0xd90/0x114c scsi_error_handler+0x2b4/0xb70 kthread+0x16c/0x1e0
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:jbd2: check 'jh->b_transaction' before removing it from checkpointFollowing process will corrupt ext4 image:Step 1:jbd2_journal_commit_transaction __jbd2_journal_insert_checkpoint(jh, commit_transaction) // Put jh into trans1->t_checkpoint_list journal->j_checkpoint_transactions = commit_transaction // Put trans1 into journal->j_checkpoint_transactionsStep 2:do_get_write_access test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty __jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2Step 3:drop_cache journal_shrink_one_cp_list jbd2_journal_try_remove_checkpoint if (!trylock_buffer(bh)) // lock bh, true if (buffer_dirty(bh)) // buffer is not dirty __jbd2_journal_remove_checkpoint(jh) // remove jh from trans1->t_checkpoint_listStep 4:jbd2_log_do_checkpoint trans1 = journal->j_checkpoint_transactions // jh is not in trans1->t_checkpoint_list jbd2_cleanup_journal_tail(journal) // trans1 is doneStep 5: Power cut, trans2 is not committed, jh is lost in next mounting.Fix it by checking 'jh->b_transaction' before remove it from checkpoint.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") theperf_sample_event_took() function was added to report time spent inoverflow interrupts. If the interrupt takes too long, the perf frameworkwill lower the sysctl_perf_event_sample_rate and max_samples_per_tick.When hwc->interrupts is larger than max_samples_per_tick, thehwc->interrupts will be set to MAX_INTERRUPTS, and events will bethrottled within the __perf_event_account_interrupt() function.However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update thePERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()function to avoid throttling. When the perf framework unthrottled the eventin the timer interrupt handler, it triggers riscv_pmu_start() functionand causes a WARN_ON_ONCE() warning, as shown below: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e Modules linked in: CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1 Hardware name: SiFive (DT) epc : riscv_pmu_start+0x7c/0x8e ra : riscv_pmu_start+0x28/0x8e epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0 gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0 t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720 s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000 a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000 a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030 s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00 s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000 s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340 s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796 t5 : 0000000700000000 t6 : ffffaf8005269870 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [] riscv_pmu_start+0x7c/0x8e [] perf_adjust_freq_unthr_context+0x15e/0x174 [] perf_event_task_tick+0x88/0x9c [] scheduler_tick+0xfe/0x27c [] update_process_times+0x9a/0xba [] tick_sched_handle+0x32/0x66 [] tick_sched_timer+0x64/0xb0 [] __hrtimer_run_queues+0x156/0x2f4 [] hrtimer_interrupt+0xe2/0x1fe [] riscv_timer_interrupt+0x38/0x42 [] handle_percpu_devid_irq+0x90/0x1d2 [] generic_handle_domain_irq+0x28/0x36After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,they don't call *_pmu_stop() to update with PERF_HES_STOPPED flagafter perf_event_overflow() function nor do they add PERF_HES_STOPPEDflag checking in *_pmu_start() which don't cause this warning.Thus, it's recommended to remove this unnecessary check inriscv_pmu_start() function to prevent this warning.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: A vulnerability was found in GNU Binutils 2.43. It has been classified as problematic. This affects the function xstrdup of the file libiberty/xmalloc.c of the component ld. The manipulation leads to memory leak. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability was found in GNU Binutils 2.43. It has been declared as problematic. Affected by this vulnerability is the function bfd_putl64 of the file libbfd.c of the component ld. The manipulation leads to memory corruption. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is 75086e9de1707281172cc77f178e7949a4414ed0. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability was found in GNU Binutils 2.43. It has been rated as critical. Affected by this issue is the function bfd_putl64 of the file bfd/libbfd.c of the component ld. The manipulation leads to memory corruption. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 2.44 is able to address this issue. It is recommended to upgrade the affected component. The code maintainer explains, that "[t]his bug has been fixed at some point between the 2.43 and 2.44 releases".
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability classified as critical was found in GNU Binutils 2.43. This vulnerability affects the function _bfd_elf_gc_mark_rsec of the file bfd/elflink.c of the component ld. The manipulation leads to memory corruption. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The name of the patch is 931494c9a89558acb36a03a340c01726545eef24. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: Uncaught exception in the core management mechanism for some Intel(R) Processors may allow an authenticated user to potentially enable denial of service via local access.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: Insufficient resource pool in the core management mechanism for some Intel(R) Processors may allow an authenticated user to potentially enable denial of service via local access.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:iommu/arm-smmu-qcom: Add SM6115 MDSS compatibleAdd the SM6115 MDSS compatible to clients compatible list, as it alsoneeds that workaround.Without this workaround, for example, QRB4210 RB2 which is based onSM4250/SM6115 generates a lot of smmu unhandled context faults duringboot:arm_smmu_context_fault: 116854 callbacks suppressedarm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420and also failed initialisation of lontium lt9611uxc, gpu and dpu isobserved:(binding MDSS components triggered by lt9611uxc have failed) ------------[ cut here ]------------ !aspace WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm] Modules linked in: ... (long list of modules) CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_gem_vma_init+0x150/0x18c [msm] lr : msm_gem_vma_init+0x150/0x18c [msm] sp : ffff80008144b280 ... Call trace: msm_gem_vma_init+0x150/0x18c [msm] (P) get_vma_locked+0xc0/0x194 [msm] msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm] msm_gem_kernel_new+0x48/0x160 [msm] msm_gpu_init+0x34c/0x53c [msm] adreno_gpu_init+0x1b0/0x2d8 [msm] a6xx_gpu_init+0x1e8/0x9e0 [msm] adreno_bind+0x2b8/0x348 [msm] component_bind_all+0x100/0x230 msm_drm_bind+0x13c/0x3d0 [msm] try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa4/0x174 component_add+0x14/0x20 dsi_dev_attach+0x20/0x34 [msm] dsi_host_attach+0x58/0x98 [msm] devm_mipi_dsi_attach+0x34/0x90 lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc] lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc] i2c_device_probe+0x148/0x2a8 really_probe+0xbc/0x2c0 __driver_probe_device+0x78/0x120 driver_probe_device+0x3c/0x154 __driver_attach+0x90/0x1a0 bus_for_each_dev+0x68/0xb8 driver_attach+0x24/0x30 bus_add_driver+0xe4/0x208 driver_register+0x68/0x124 i2c_register_driver+0x48/0xcc lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc] do_one_initcall+0x60/0x1d4 do_init_module+0x54/0x1fc load_module+0x1748/0x1c8c init_module_from_file+0x74/0xa0 __arm64_sys_finit_module+0x130/0x2f8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x2c/0x80 el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22 msm_dpu 5e01000.display-controller: failed to load adreno gpu platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19 msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22 msm_dpu 5e01000.display-controller: adev bind failed: -22 lt9611uxc 0-002b: failed to attach dsi to host lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:NFS: Fix the setting of capabilities when automounting a new filesystemCapabilities cannot be inherited when we cross into a new filesystem.They need to be reset to the minimal defaults, and then probed foragain.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:usb: dwc3: Remove WARN_ON for device endpoint command timeoutsThis commit addresses a rarely observed endpoint command timeoutwhich causes kernel panic due to warn when 'panic_on_warn' is enabledand unnecessary call trace prints when 'panic_on_warn' is disabled.It is seen during fast software-controlled connect/disconnect testcases.The following is one such endpoint command timeout that we observed:1. Connect =======->dwc3_thread_interrupt ->dwc3_ep0_interrupt ->configfs_composite_setup ->composite_setup ->usb_ep_queue ->dwc3_gadget_ep0_queue ->__dwc3_gadget_ep0_queue ->__dwc3_ep0_do_control_data ->dwc3_send_gadget_ep_cmd2. Disconnect ==========->dwc3_thread_interrupt ->dwc3_gadget_disconnect_interrupt ->dwc3_ep0_reset_state ->dwc3_ep0_end_control_data ->dwc3_send_gadget_ep_cmdIn the issue scenario, in Exynos platforms, we observed that controltransfers for the previous connect have not yet been completed and endtransfer command sent as a part of the disconnect sequence andprocessing of USB_ENDPOINT_HALT feature request from the host timeout.This maybe an expected scenario since the controller is processing EPcommands sent as a part of the previous connect. It maybe better toremove WARN_ON in all places where device endpoint commands are sent toavoid unnecessary kernel panic due to warn.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:KVM: arm64: Prevent access to vCPU events before initAnother day, another syzkaller bug. KVM erroneously allows userspace topend vCPU events for a vCPU that hasn't been initialized yet, leading toKVM interpreting a bunch of uninitialized garbage for routing /injecting the exception.In one case the injection code and the hyp disagree on whether the vCPUhas a 32bit EL1 and put the vCPU into an illegal mode for AArch64,tripping the BUG() in exception_target_el() during the next injection: kernel BUG at arch/arm64/kvm/inject_fault.c:40! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : exception_target_el+0x88/0x8c lr : pend_serror_exception+0x18/0x13c sp : ffff800082f03a10 x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000 x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000 x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004 x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20 Call trace: exception_target_el+0x88/0x8c (P) kvm_inject_serror_esr+0x40/0x3b4 __kvm_arm_vcpu_set_events+0xf0/0x100 kvm_arch_vcpu_ioctl+0x180/0x9d4 kvm_vcpu_ioctl+0x60c/0x9f4 __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)Reject the ioctls outright as no sane VMM would call these beforeKVM_ARM_VCPU_INIT anyway. Even if it did the exception would've beenthrown away by the eventual reset of the vCPU's state.
Packages affected:
- sle-module-development-tools-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default > 0-0 (version in image is 6.4.0-150700.53.19.1).
-
Description: In the Linux kernel, the following vulnerability has been resolved:ixgbevf: fix mailbox API compatibility by negotiating supported featuresThere was backward compatibility in the terms of mailbox API. Variousdrivers from various OSes supporting 10G adapters from Intel portfoliocould easily negotiate mailbox API.This convention has been broken since introducing API 1.4.Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added supportfor IPSec which is specific only for the kernel ixgbe driver. None of therest of the Intel 10G PF/VF drivers supports it. And actually lack ofsupport was not included in the IPSec implementation - there were no suchcode paths. No possibility to negotiate support for the feature wasintroduced along with introduction of the feature itself.Commit 339f28964147 ("ixgbevf: Add support for new mailbox communicationbetween PF and VF") increasing API version to 1.5 did the same - itintroduced code supported specifically by the PF ESX driver. It altered APIversion for the VF driver in the same time not touching the versiondefined for the PF ixgbe driver. It led to additional discrepancies,as the code provided within API 1.6 cannot be supported for Linux ixgbedriver as it causes crashes.The issue was noticed some time ago and mitigated by Jake within the commitd0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").As a result we have regression for IPsec support and after increasing APIto version 1.6 ixgbevf driver stopped to support ESX MBX.To fix this mess add new mailbox op asking PF driver about supportedfeatures. Basing on a response determine whether to set support for IPSecand ESX-specific enhanced mailbox.New mailbox op, for compatibility purposes, must be added within new APIrevision, as API version of OOT PF & VF drivers is already increased to1.6 and doesn't incorporate features negotiate op.Features negotiation mechanism gives possibility to be extended with newfeatures when needed in the future.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- kernel-default < 6.4.0-150700.53.22.1 (version in image is 6.4.0-150700.53.19.1).
-
Description: HarfBuzz::Shaper versions before 0.032 for Perl contains a bundled library with a null pointer dereference vulnerability. Versions before 0.032 contain HarfBuzz 8.4.0 or earlier bundled as hb_src.tar.gz in the source tarball, which is affected by CVE-2026-22693.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- libharfbuzz0 > 0-0 (version in image is 8.3.0-150600.1.3).
-
Description: A vulnerability was found in GNU Binutils 2.43 and classified as problematic. Affected by this issue is the function link_order_scan of the file ld/ldelfgen.c of the component ld. The manipulation leads to memory leak. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability was found in GNU Binutils 2.43. It has been rated as problematic. This issue affects the function xmemdup of the file xmemdup.c of the component ld. The manipulation leads to memory leak. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability classified as problematic has been found in GNU Binutils 2.43. Affected is the function xstrdup of the file xstrdup.c of the component ld. The manipulation leads to memory leak. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The code maintainer explains: "I'm not going to commit some of the leak fixes I've been working on to the 2.44 branch due to concern that would destabilise ld. All of the reported leaks in this bugzilla have been fixed on binutils master."
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability classified as problematic was found in GNU Binutils 2.43/2.44. Affected by this vulnerability is the function bfd_set_format of the file format.c. The manipulation leads to memory corruption. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. Upgrading to version 2.45 is able to address this issue. The identifier of the patch is 8d97c1a53f3dc9fd8e1ccdb039b8a33d50133150. It is recommended to upgrade the affected component.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability classified as problematic has been found in GNU Binutils 2.43. This affects the function _bfd_elf_write_section_eh_frame of the file bfd/elf-eh-frame.c of the component ld. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- binutils < 2.45-150100.7.57.1 (version in image is 2.43-150100.7.52.1).
-
Description: A vulnerability, which was classified as problematic, has been found in GNU elfutils 0.192. This issue affects the function gelf_getsymshndx of the file strip.c of the component eu-strip. The manipulation leads to denial of service. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of the patch is fbf1df9ca286de3323ae541973b08449f8d03aba. It is recommended to apply a patch to fix this issue.
Packages affected:
- sle-module-basesystem-release == 15.7 (version in image is 15.7-150700.28.1).
- elfutils < 0.185-150400.5.8.3 (version in image is 0.185-150400.5.3.1).